| /* SPDX-License-Identifier: GPL-2.0+ */ |
| /* |
| * Configuration for Android Amlogic Meson 64bits SoCs |
| * |
| * Copyright (C) 2019 Baylibre, SAS |
| * Author: Jerome Brunet <jbrunet@baylibre.com> |
| */ |
| |
| #ifndef __MESON64_ANDROID_CONFIG_H |
| #define __MESON64_ANDROID_CONFIG_H |
| |
| #include <linux/sizes.h> |
| |
| #ifndef BOOT_PARTITION |
| #define BOOT_PARTITION "boot" |
| #endif |
| |
| #ifndef LOGO_PARTITION |
| #define LOGO_PARTITION "logo" |
| #endif |
| |
| #ifndef CONTROL_PARTITION |
| #define CONTROL_PARTITION "misc" |
| #endif |
| |
| #if defined(CONFIG_CMD_AVB) |
| #define AVB_VERIFY_CHECK \ |
| "if test \"${force_avb}\" -eq 1; then " \ |
| "if run avb_verify; then " \ |
| "echo AVB verification OK.;" \ |
| "setenv bootargs \"$bootargs $avb_bootargs\";" \ |
| "else " \ |
| "echo AVB verification failed.;" \ |
| "exit; fi;" \ |
| "else " \ |
| "setenv bootargs \"$bootargs androidboot.verifiedbootstate=orange\";" \ |
| "echo Running without AVB...; "\ |
| "fi;" |
| |
| #define AVB_VERIFY_CMD "avb_verify=avb init ${mmcdev}; avb verify $slot_suffix;\0" |
| #else |
| #define AVB_VERIFY_CHECK "" |
| #define AVB_VERIFY_CMD "" |
| #endif |
| |
| #if defined(CONFIG_CMD_AB_SELECT) |
| #define ANDROIDBOOT_GET_CURRENT_SLOT_CMD "get_current_slot=" \ |
| "if part number mmc ${mmcdev} " CONTROL_PARTITION " control_part_number; " \ |
| "then " \ |
| "echo " CONTROL_PARTITION \ |
| " partition number:${control_part_number};" \ |
| "ab_select current_slot mmc ${mmcdev}:${control_part_number};" \ |
| "else " \ |
| "echo " CONTROL_PARTITION " partition not found;" \ |
| "fi;\0" |
| |
| #define AB_SELECT_SLOT \ |
| "run get_current_slot; " \ |
| "if test -e \"${current_slot}\"; " \ |
| "then " \ |
| "setenv slot_suffix _${current_slot}; " \ |
| "else " \ |
| "echo current_slot not found;" \ |
| "exit;" \ |
| "fi;" |
| |
| #define AB_SELECT_ARGS \ |
| "setenv bootargs_ab androidboot.slot_suffix=${slot_suffix}; " \ |
| "echo A/B cmdline addition: ${bootargs_ab};" \ |
| "setenv bootargs ${bootargs} ${bootargs_ab};" |
| |
| #define AB_BOOTARGS " androidboot.force_normal_boot=1" |
| #define RECOVERY_PARTITION "boot" |
| #else |
| #define AB_SELECT_SLOT "" |
| #define AB_SELECT_ARGS " " |
| #define ANDROIDBOOT_GET_CURRENT_SLOT_CMD "" |
| #define AB_BOOTARGS " " |
| #define RECOVERY_PARTITION "recovery" |
| #endif |
| |
| #if defined(CONFIG_CMD_ABOOTIMG) |
| /* |
| * Prepares complete device tree blob for current board (for Android boot). |
| * |
| * Boot image or recovery image should be loaded into $loadaddr prior to running |
| * these commands. The logic of these commnads is next: |
| * |
| * 1. Read correct DTB for current SoC/board from boot image in $loadaddr |
| * to $fdtaddr |
| * 2. Merge all needed DTBO for current board from 'dtbo' partition into read |
| * DTB |
| * 3. User should provide $fdtaddr as 3rd argument to 'bootm' |
| */ |
| #define PREPARE_FDT \ |
| "echo Preparing FDT...; " \ |
| "if test $board_name = sei510; then " \ |
| "echo \" Reading DTB for sei510...\"; " \ |
| "setenv dtb_index 0;" \ |
| "elif test $board_name = sei610; then " \ |
| "echo \" Reading DTB for sei610...\"; " \ |
| "setenv dtb_index 1;" \ |
| "else " \ |
| "echo Error: Android boot is not supported for $board_name; " \ |
| "exit; " \ |
| "fi; " \ |
| "abootimg get dtb --index=$dtb_index dtb_start dtb_size; " \ |
| "cp.b $dtb_start $fdt_addr_r $dtb_size; " \ |
| "fdt addr $fdt_addr_r 0x80000; " \ |
| "if test $board_name = sei510; then " \ |
| "echo \" Reading DTBO for sei510...\"; " \ |
| "setenv dtbo_index 0;" \ |
| "elif test $board_name = sei610; then " \ |
| "echo \" Reading DTBO for sei610...\"; " \ |
| "setenv dtbo_index 1;" \ |
| "else " \ |
| "echo Error: Android boot is not supported for $board_name; " \ |
| "exit; " \ |
| "fi; " \ |
| "part start mmc ${mmcdev} dtbo${slot_suffix} p_dtbo_start; " \ |
| "part size mmc ${mmcdev} dtbo${slot_suffix} p_dtbo_size; " \ |
| "mmc read ${dtboaddr} ${p_dtbo_start} ${p_dtbo_size}; " \ |
| "echo \" Applying DTBOs...\"; " \ |
| "adtimg addr $dtboaddr; " \ |
| "adtimg get dt --index=$dtbo_index dtbo0_addr; " \ |
| "fdt apply $dtbo0_addr;" \ |
| "setenv bootargs \"$bootargs androidboot.dtbo_idx=$dtbo_index \";"\ |
| |
| #define BOOT_CMD "bootm ${loadaddr} ${loadaddr} ${fdt_addr_r};" |
| |
| #else |
| #define PREPARE_FDT " " |
| #define BOOT_CMD "bootm ${loadaddr};" |
| #endif |
| |
| #define BOOTENV_DEV_FASTBOOT(devtypeu, devtypel, instance) \ |
| "bootcmd_fastboot=" \ |
| "setenv run_fastboot 0;" \ |
| "if test \"${boot_source}\" = \"usb\"; then " \ |
| "echo Fastboot forced by usb rom boot;" \ |
| "setenv run_fastboot 1;" \ |
| "fi;" \ |
| "if test \"${run_fastboot}\" -eq 0; then " \ |
| "if gpt verify mmc ${mmcdev} ${partitions}; then; " \ |
| "else " \ |
| "echo Broken MMC partition scheme;" \ |
| "setenv run_fastboot 1;" \ |
| "fi; " \ |
| "fi;" \ |
| "if test \"${run_fastboot}\" -eq 0; then " \ |
| "if bcb load " __stringify(CONFIG_FASTBOOT_FLASH_MMC_DEV) " " \ |
| CONTROL_PARTITION "; then " \ |
| "if bcb test command = bootonce-bootloader; then " \ |
| "echo BCB: Bootloader boot...; " \ |
| "bcb clear command; bcb store; " \ |
| "setenv run_fastboot 1;" \ |
| "elif bcb test command = boot-fastboot; then " \ |
| "echo BCB: fastboot userspace boot...; " \ |
| "setenv force_recovery 1;" \ |
| "fi; " \ |
| "else " \ |
| "echo Warning: BCB is corrupted or does not exist; " \ |
| "fi;" \ |
| "fi;" \ |
| "if test \"${run_fastboot}\" -eq 1; then " \ |
| "echo Running Fastboot...;" \ |
| "fastboot " __stringify(CONFIG_FASTBOOT_USB_DEV) "; " \ |
| "fi\0" |
| |
| #define BOOTENV_DEV_NAME_FASTBOOT(devtypeu, devtypel, instance) \ |
| "fastboot " |
| |
| #define BOOTENV_DEV_RECOVERY(devtypeu, devtypel, instance) \ |
| "bootcmd_recovery=" \ |
| "pinmux dev pinctrl@14;" \ |
| "pinmux dev pinctrl@40;" \ |
| "setenv run_recovery 0;" \ |
| "if run check_button; then " \ |
| "echo Recovery button is pressed;" \ |
| "setenv run_recovery 1;" \ |
| "fi; " \ |
| "if bcb load " __stringify(CONFIG_FASTBOOT_FLASH_MMC_DEV) " " \ |
| CONTROL_PARTITION "; then " \ |
| "if bcb test command = boot-recovery; then " \ |
| "echo BCB: Recovery boot...; " \ |
| "setenv run_recovery 1;" \ |
| "fi;" \ |
| "else " \ |
| "echo Warning: BCB is corrupted or does not exist; " \ |
| "fi;" \ |
| "if test \"${skip_recovery}\" -eq 1; then " \ |
| "echo Recovery skipped by environment;" \ |
| "setenv run_recovery 0;" \ |
| "fi;" \ |
| "if test \"${force_recovery}\" -eq 1; then " \ |
| "echo Recovery forced by environment;" \ |
| "setenv run_recovery 1;" \ |
| "fi;" \ |
| "if test \"${run_recovery}\" -eq 1; then " \ |
| "echo Running Recovery...;" \ |
| "mmc dev ${mmcdev};" \ |
| "setenv bootargs \"${bootargs} androidboot.serialno=${serial#}\";" \ |
| AB_SELECT_SLOT \ |
| AB_SELECT_ARGS \ |
| AVB_VERIFY_CHECK \ |
| "part start mmc ${mmcdev} " RECOVERY_PARTITION "${slot_suffix} boot_start;" \ |
| "part size mmc ${mmcdev} " RECOVERY_PARTITION "${slot_suffix} boot_size;" \ |
| "if mmc read ${loadaddr} ${boot_start} ${boot_size}; then " \ |
| PREPARE_FDT \ |
| "echo Running Android Recovery...;" \ |
| BOOT_CMD \ |
| "fi;" \ |
| "echo Failed to boot Android...;" \ |
| "reset;" \ |
| "fi\0" |
| |
| #define BOOTENV_DEV_NAME_RECOVERY(devtypeu, devtypel, instance) \ |
| "recovery " |
| |
| #define BOOTENV_DEV_SYSTEM(devtypeu, devtypel, instance) \ |
| "bootcmd_system=" \ |
| "echo Loading Android " BOOT_PARTITION " partition...;" \ |
| "mmc dev ${mmcdev};" \ |
| "setenv bootargs ${bootargs} androidboot.serialno=${serial#};" \ |
| AB_SELECT_SLOT \ |
| AB_SELECT_ARGS \ |
| AVB_VERIFY_CHECK \ |
| "part start mmc ${mmcdev} " BOOT_PARTITION "${slot_suffix} boot_start;" \ |
| "part size mmc ${mmcdev} " BOOT_PARTITION "${slot_suffix} boot_size;" \ |
| "if mmc read ${loadaddr} ${boot_start} ${boot_size}; then " \ |
| PREPARE_FDT \ |
| "setenv bootargs \"${bootargs} " AB_BOOTARGS "\" ; " \ |
| "echo Running Android...;" \ |
| BOOT_CMD \ |
| "fi;" \ |
| "echo Failed to boot Android...;" \ |
| "reset\0" |
| |
| #define BOOTENV_DEV_NAME_SYSTEM(devtypeu, devtypel, instance) \ |
| "system " |
| |
| #define BOOT_TARGET_DEVICES(func) \ |
| func(FASTBOOT, fastboot, na) \ |
| func(RECOVERY, recovery, na) \ |
| func(SYSTEM, system, na) \ |
| |
| #define PREBOOT_LOAD_LOGO \ |
| "if test \"${boot_source}\" != \"usb\" && " \ |
| "gpt verify mmc ${mmcdev} ${partitions}; then; " \ |
| "mmc dev ${mmcdev};" \ |
| "part start mmc ${mmcdev} " LOGO_PARTITION " boot_start;" \ |
| "part size mmc ${mmcdev} " LOGO_PARTITION " boot_size;" \ |
| "if mmc read ${loadaddr} ${boot_start} ${boot_size}; then " \ |
| "bmp display ${loadaddr} m m;" \ |
| "fi;" \ |
| "fi;" |
| |
| #define CONFIG_EXTRA_ENV_SETTINGS \ |
| "partitions=" PARTS_DEFAULT "\0" \ |
| "mmcdev=2\0" \ |
| ANDROIDBOOT_GET_CURRENT_SLOT_CMD \ |
| AVB_VERIFY_CMD \ |
| "force_avb=0\0" \ |
| "gpio_recovery=88\0" \ |
| "check_button=gpio input ${gpio_recovery};test $? -eq 0;\0" \ |
| "load_logo=" PREBOOT_LOAD_LOGO "\0" \ |
| "stdin=" STDIN_CFG "\0" \ |
| "stdout=" STDOUT_CFG "\0" \ |
| "stderr=" STDOUT_CFG "\0" \ |
| "dtboaddr=0x08200000\0" \ |
| "loadaddr=0x01080000\0" \ |
| "fdt_addr_r=0x01000000\0" \ |
| "scriptaddr=0x08000000\0" \ |
| "kernel_addr_r=0x01080000\0" \ |
| "pxefile_addr_r=0x01080000\0" \ |
| "ramdisk_addr_r=0x13000000\0" \ |
| "fdtfile=amlogic/" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \ |
| BOOTENV |
| |
| #include <configs/meson64.h> |
| |
| #endif /* __MESON64_ANDROID_CONFIG_H */ |