| // SPDX-License-Identifier: (GPL-2.0 OR MIT) |
| /* |
| * Copyright 2023 Google LLC |
| */ |
| |
| /dts-v1/; |
| #include "mt8183-kukui-jacuzzi.dtsi" |
| #include "mt8183-kukui-audio-ts3a227e-max98357a.dtsi" |
| |
| / { |
| model = "Google pico6 board"; |
| chassis-type = "convertible"; |
| compatible = "google,pico-sku2", "google,pico", "mediatek,mt8183"; |
| |
| bt_wakeup: bt-wakeup { |
| compatible = "gpio-keys"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&bt_pins_wakeup>; |
| |
| wobt { |
| label = "Wake on BT"; |
| gpios = <&pio 42 GPIO_ACTIVE_HIGH>; |
| linux,code = <KEY_WAKEUP>; |
| wakeup-source; |
| }; |
| }; |
| }; |
| |
| &i2c_tunnel { |
| google,remote-bus = <0>; |
| }; |
| |
| &i2c2 { |
| i2c-scl-internal-delay-ns = <25000>; |
| |
| trackpad@2c { |
| compatible = "hid-over-i2c"; |
| reg = <0x2c>; |
| hid-descr-addr = <0x20>; |
| |
| pinctrl-names = "default"; |
| pinctrl-0 = <&trackpad_pins>; |
| |
| interrupts-extended = <&pio 7 IRQ_TYPE_LEVEL_LOW>; |
| |
| wakeup-source; |
| }; |
| }; |
| |
| &wifi_wakeup { |
| wowlan { |
| gpios = <&pio 113 GPIO_ACTIVE_LOW>; |
| }; |
| }; |
| |
| &wifi_pwrseq { |
| post-power-on-delay-ms = <50>; |
| |
| /* Toggle WIFI_ENABLE to reset the chip. */ |
| reset-gpios = <&pio 8 GPIO_ACTIVE_LOW>; |
| }; |
| |
| &wifi_pins_pwrseq { |
| pins-wifi-enable { |
| pinmux = <PINMUX_GPIO8__FUNC_GPIO8>; |
| }; |
| }; |
| |
| &mmc1_pins_default { |
| pins-cmd-dat { |
| drive-strength = <MTK_DRIVE_6mA>; |
| }; |
| pins-clk { |
| drive-strength = <MTK_DRIVE_6mA>; |
| }; |
| }; |
| |
| &mmc1_pins_uhs { |
| pins-clk { |
| drive-strength = <MTK_DRIVE_6mA>; |
| }; |
| }; |
| |
| &mmc1 { |
| bluetooth@2 { |
| reg = <2>; |
| compatible = "mediatek,mt7921s-bluetooth"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&bt_pins_reset>; |
| reset-gpios = <&pio 120 GPIO_ACTIVE_LOW>; |
| }; |
| }; |
| |
| &pio { |
| bt_pins_wakeup: bt-pins-wakeup { |
| piins-bt-wakeup { |
| pinmux = <PINMUX_GPIO42__FUNC_GPIO42>; |
| input-enable; |
| }; |
| }; |
| |
| bt_pins_reset: bt-pins-reset { |
| pins-bt-reset { |
| pinmux = <PINMUX_GPIO120__FUNC_GPIO120>; |
| output-high; |
| }; |
| }; |
| }; |
| |
| /delete-node/ &bluetooth; |
| /delete-node/ &bt_pins; |