| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/interrupt-controller/renesas,rzg2l-irqc.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: Renesas RZ/G2L (and alike SoC's) Interrupt Controller (IA55) |
| |
| maintainers: |
| - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> |
| - Geert Uytterhoeven <geert+renesas@glider.be> |
| |
| description: | |
| IA55 performs various interrupt controls including synchronization for the external |
| interrupts of NMI, IRQ, and GPIOINT and the interrupts of the built-in peripheral |
| interrupts output by each IP. And it notifies the interrupt to the GIC |
| - IRQ sense select for 8 external interrupts, mapped to 8 GIC SPI interrupts |
| - GPIO pins used as external interrupt input pins, mapped to 32 GIC SPI interrupts |
| - NMI edge select (NMI is not treated as NMI exception and supports fall edge and |
| stand-up edge detection interrupts) |
| |
| properties: |
| compatible: |
| items: |
| - enum: |
| - renesas,r9a07g043u-irqc # RZ/G2UL |
| - renesas,r9a07g044-irqc # RZ/G2{L,LC} |
| - renesas,r9a07g054-irqc # RZ/V2L |
| - renesas,r9a08g045-irqc # RZ/G3S |
| - const: renesas,rzg2l-irqc |
| |
| '#interrupt-cells': |
| description: The first cell should contain a macro RZG2L_{NMI,IRQX} included in the |
| include/dt-bindings/interrupt-controller/irqc-rzg2l.h and the second |
| cell is used to specify the flag. |
| const: 2 |
| |
| '#address-cells': |
| const: 0 |
| |
| interrupt-controller: true |
| |
| reg: |
| maxItems: 1 |
| |
| interrupts: |
| minItems: 45 |
| items: |
| - description: NMI interrupt |
| - description: IRQ0 interrupt |
| - description: IRQ1 interrupt |
| - description: IRQ2 interrupt |
| - description: IRQ3 interrupt |
| - description: IRQ4 interrupt |
| - description: IRQ5 interrupt |
| - description: IRQ6 interrupt |
| - description: IRQ7 interrupt |
| - description: GPIO interrupt, TINT0 |
| - description: GPIO interrupt, TINT1 |
| - description: GPIO interrupt, TINT2 |
| - description: GPIO interrupt, TINT3 |
| - description: GPIO interrupt, TINT4 |
| - description: GPIO interrupt, TINT5 |
| - description: GPIO interrupt, TINT6 |
| - description: GPIO interrupt, TINT7 |
| - description: GPIO interrupt, TINT8 |
| - description: GPIO interrupt, TINT9 |
| - description: GPIO interrupt, TINT10 |
| - description: GPIO interrupt, TINT11 |
| - description: GPIO interrupt, TINT12 |
| - description: GPIO interrupt, TINT13 |
| - description: GPIO interrupt, TINT14 |
| - description: GPIO interrupt, TINT15 |
| - description: GPIO interrupt, TINT16 |
| - description: GPIO interrupt, TINT17 |
| - description: GPIO interrupt, TINT18 |
| - description: GPIO interrupt, TINT19 |
| - description: GPIO interrupt, TINT20 |
| - description: GPIO interrupt, TINT21 |
| - description: GPIO interrupt, TINT22 |
| - description: GPIO interrupt, TINT23 |
| - description: GPIO interrupt, TINT24 |
| - description: GPIO interrupt, TINT25 |
| - description: GPIO interrupt, TINT26 |
| - description: GPIO interrupt, TINT27 |
| - description: GPIO interrupt, TINT28 |
| - description: GPIO interrupt, TINT29 |
| - description: GPIO interrupt, TINT30 |
| - description: GPIO interrupt, TINT31 |
| - description: Bus error interrupt |
| - description: ECCRAM0 or combined ECCRAM0/1 1bit error interrupt |
| - description: ECCRAM0 or combined ECCRAM0/1 2bit error interrupt |
| - description: ECCRAM0 or combined ECCRAM0/1 error overflow interrupt |
| - description: ECCRAM1 1bit error interrupt |
| - description: ECCRAM1 2bit error interrupt |
| - description: ECCRAM1 error overflow interrupt |
| |
| interrupt-names: |
| minItems: 45 |
| items: |
| - const: nmi |
| - const: irq0 |
| - const: irq1 |
| - const: irq2 |
| - const: irq3 |
| - const: irq4 |
| - const: irq5 |
| - const: irq6 |
| - const: irq7 |
| - const: tint0 |
| - const: tint1 |
| - const: tint2 |
| - const: tint3 |
| - const: tint4 |
| - const: tint5 |
| - const: tint6 |
| - const: tint7 |
| - const: tint8 |
| - const: tint9 |
| - const: tint10 |
| - const: tint11 |
| - const: tint12 |
| - const: tint13 |
| - const: tint14 |
| - const: tint15 |
| - const: tint16 |
| - const: tint17 |
| - const: tint18 |
| - const: tint19 |
| - const: tint20 |
| - const: tint21 |
| - const: tint22 |
| - const: tint23 |
| - const: tint24 |
| - const: tint25 |
| - const: tint26 |
| - const: tint27 |
| - const: tint28 |
| - const: tint29 |
| - const: tint30 |
| - const: tint31 |
| - const: bus-err |
| - const: ec7tie1-0 |
| - const: ec7tie2-0 |
| - const: ec7tiovf-0 |
| - const: ec7tie1-1 |
| - const: ec7tie2-1 |
| - const: ec7tiovf-1 |
| |
| clocks: |
| maxItems: 2 |
| |
| clock-names: |
| items: |
| - const: clk |
| - const: pclk |
| |
| power-domains: |
| maxItems: 1 |
| |
| resets: |
| maxItems: 1 |
| |
| required: |
| - compatible |
| - '#interrupt-cells' |
| - '#address-cells' |
| - interrupt-controller |
| - reg |
| - interrupts |
| - interrupt-names |
| - clocks |
| - clock-names |
| - power-domains |
| - resets |
| |
| allOf: |
| - $ref: /schemas/interrupt-controller.yaml# |
| |
| - if: |
| properties: |
| compatible: |
| contains: |
| enum: |
| - renesas,r9a08g045-irqc |
| then: |
| properties: |
| interrupts: |
| maxItems: 45 |
| interrupt-names: |
| maxItems: 45 |
| else: |
| properties: |
| interrupts: |
| minItems: 48 |
| interrupt-names: |
| minItems: 48 |
| |
| unevaluatedProperties: false |
| |
| examples: |
| - | |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/clock/r9a07g044-cpg.h> |
| |
| irqc: interrupt-controller@110a0000 { |
| compatible = "renesas,r9a07g044-irqc", "renesas,rzg2l-irqc"; |
| reg = <0x110a0000 0x10000>; |
| #interrupt-cells = <2>; |
| #address-cells = <0>; |
| interrupt-controller; |
| interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 453 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 454 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 455 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 35 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 36 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 37 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 38 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>; |
| interrupt-names = "nmi", |
| "irq0", "irq1", "irq2", "irq3", |
| "irq4", "irq5", "irq6", "irq7", |
| "tint0", "tint1", "tint2", "tint3", |
| "tint4", "tint5", "tint6", "tint7", |
| "tint8", "tint9", "tint10", "tint11", |
| "tint12", "tint13", "tint14", "tint15", |
| "tint16", "tint17", "tint18", "tint19", |
| "tint20", "tint21", "tint22", "tint23", |
| "tint24", "tint25", "tint26", "tint27", |
| "tint28", "tint29", "tint30", "tint31", |
| "bus-err", "ec7tie1-0", "ec7tie2-0", |
| "ec7tiovf-0", "ec7tie1-1", "ec7tie2-1", |
| "ec7tiovf-1"; |
| clocks = <&cpg CPG_MOD R9A07G044_IA55_CLK>, |
| <&cpg CPG_MOD R9A07G044_IA55_PCLK>; |
| clock-names = "clk", "pclk"; |
| power-domains = <&cpg>; |
| resets = <&cpg R9A07G044_IA55_RESETN>; |
| }; |