| commit 17a41e4492121ccf9fa2c10c2cb1a6d1c18d74f7 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Wed Jan 9 16:56:54 2008 -0600 |
| |
| Add QE brg freq and correct qe bus freq fdt update code |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 890dfef06c2d169a3356359596890754dfb8ee1c |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Wed Jan 9 16:34:51 2008 -0600 |
| |
| Remove cache config from ATUM8548 and sbc8548 configs |
| |
| These boards weren't updated by Kumar's config patch because they |
| weren't in the tree, yet. |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit b8ec2385038c094b07ec5b49336289a46b6e9cc6 |
| Author: Timur Tabi <timur@freescale.com> |
| Date: Mon Jan 7 13:31:19 2008 -0600 |
| |
| 85xx: add ability to upload QE firmware |
| |
| Define the layout of a binary blob that contains a QE firmware and instructions |
| on how to upload it. Add function qe_upload_firmware() to parse the blob and |
| perform the actual upload. Add command-line command "qe fw" to take a firmware |
| blob in memory and upload it. Update ft_cpu_setup() on 85xx to create the |
| 'firmware' device tree node if U-Boot has uploaded a firmware. Fully define |
| 'struct rsp' in immap_qe.h to include the actual RISC Special Registers. |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| |
| commit b009f3eca99bb7b9e6ba6639a8909a138dd5e9fe |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Tue Jan 8 01:22:21 2008 -0600 |
| |
| 85xx: Remove cache config from configs.h |
| |
| Either use the standard defines in asm/cache.h or grab the information |
| at runtime from the L1CFG SPR. |
| |
| Also, minor cleanup in cache.h to make the code a bit more readable. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit b964e9368f45372aaf1da0c13fe56f6d81ae8e96 |
| Author: robert lazarski <robertlazarski@gmail.com> |
| Date: Fri Dec 21 10:39:27 2007 -0500 |
| |
| mpc85xx: Add support for ATUM8548 (updated) |
| |
| Add support for Instituto Atlantico's ATUM8548 board |
| |
| Signed-off-by: robert lazarski <robertlazarski@gmail.com> |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 7bd6104b71de9bca80ac8e0936003443bb42f2fc |
| Author: robert lazarski <robertlazarski@gmail.com> |
| Date: Fri Dec 21 10:36:37 2007 -0500 |
| |
| mpc85xx: Add support for ATUM8548 (updated) |
| |
| Add support for Instituto Atlantico's ATUM8548 board |
| |
| Signed-off-by: robert lazarski <robertlazarski@gmail.com> |
| |
| commit 9e3ed392d2c8965e24c942b58796c31c644c2f70 |
| Author: Joe Hamman <joe.hamman@embeddedspecialties.com> |
| Date: Thu Dec 13 06:45:14 2007 -0600 |
| |
| mpc85xx: Add support for SBC8548 (updated) |
| |
| Add support for Wind River's SBC8548 reference board. |
| |
| Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com> |
| |
| commit 11c45ebd46d6517b51b7a92dd52a618b2f4e5586 |
| Author: Joe Hamman <joe.hamman@embeddedspecialties.com> |
| Date: Thu Dec 13 06:45:08 2007 -0600 |
| |
| mpc85xx: Add support for SBC8548 (updated) |
| |
| Add support for Wind River's SBC8548 reference board. |
| |
| Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com> |
| Signed-off by: Andy Fleming <afleming@freescale.com> |
| |
| commit 64d4bcb087c2ece1c4d0de8efe85e0075e5b1594 |
| Author: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Date: Mon Oct 22 19:58:19 2007 +0400 |
| |
| MPC8568E-MDS: set up QE pario for UART1 |
| |
| To use UART1 on the MPC8568E-MDS, QE pario pins PC[0:3] should |
| be set up appropriately. |
| |
| Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> |
| |
| commit ad162249cb371e9e38971676f09be791e5f3cf4a |
| Author: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Date: Mon Oct 22 18:12:46 2007 +0400 |
| |
| MPC8568E-MDS: reset UCCs to use them reliably |
| |
| In order to use GETH1 and GETH2 on the MPC8568E-MDS, we should reset |
| UCCs. |
| |
| p.s Similar code exists in the Linux kernel board file (for capability |
| reasons with older U-Boots), but should be removed some day. |
| |
| Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> |
| |
| commit 2146cf56821c3364786ca94a7306008c5824b238 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Dec 19 01:18:15 2007 -0600 |
| |
| Reworked FSL Book-E TLB macros to be more readable |
| |
| The old macros made it difficult to know what WIMGE and perm bits |
| were set for a TLB entry. Actually use the bit masks for these items |
| since they are only a single bit. |
| |
| Also moved the macros into mmu.h out of e500.h since they aren't specific |
| to e500. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 1d47273d46925929f8f2c1913cd96d7257aade88 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Tue Dec 18 23:21:51 2007 -0600 |
| |
| Use FSL Book-E MMU macros from Linux Kernel |
| |
| Grab the FSL Book-E MAS register macros from Linux. Also added |
| defines for page sizes up to 4TB and removed SHAREN since it doesnt |
| really exist. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 02df4a270f817ef6ec39047a01b55fecdc5f3b37 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Wed Jan 9 13:51:32 2008 -0600 |
| |
| Fix my own merge stupidity |
| |
| Way back in August I merged Heiko's patch: |
| 566a494f592: [PCS440EP] upgrade the PCS440EP board |
| |
| with Jon's CONFIG_COMMANDS patches. |
| |
| This was done in commit: 6bf6f114dcdd97ec3f80c2761ed40e31229d6b78 |
| |
| However, in the process, I left out some of Heiko's good changes. |
| |
| Now Heiko's and Jon's patches are properly merged in fat_register_device() |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 6636b62a6efc7f14e6e788788631ae7a7fca4537 |
| Author: James Yang <James.Yang@freescale.com> |
| Date: Wed Jan 9 11:17:49 2008 -0600 |
| |
| Expose parse_line() globally. |
| |
| Add new function readline_into_buffer() that allows the |
| output of readline to be put into a pointer to char buffer. |
| |
| This refactoring allows other functions besides the |
| main command loop to also use the same input mechanism. |
| |
| Signed-off-by: James Yang <James.Yang@freescale.com> |
| Acked-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 7ca90513486abd4ae50bd1b7403f47cc58c5ad25 |
| Author: Guennadi Liakhovetski <lg@denx.de> |
| Date: Wed Jan 9 01:15:25 2008 +0100 |
| |
| trivial: fix consequences of a bad merge |
| |
| Fix what looks like a merge artifact. |
| |
| Signed-off-by: Guennadi Liakhovetski <lg@denx.de> |
| |
| commit 4785a694c0045996ccf0ac5b8edf531efc1b730e |
| Author: Zhang Wei <wei.zhang@freescale.com> |
| Date: Thu Jan 3 10:51:15 2008 +0800 |
| |
| Add Ctrl combo key support to usb keyboard driver. |
| |
| Ctrl combo key support is added, which is very useful to input Ctrl-C |
| for interrupt current job. |
| Also add usb_event_poll() calling to usb_kbd_testc(), which can get |
| key input when tstc() is called. |
| |
| Signed-off-by: Zhang Wei <wei.zhang@freescale.com> |
| |
| commit 10c7382bc5d5e64c47f94ac2ca78cc574442e82d |
| Author: Marcel Ziswiler <marcel@ziswiler.com> |
| Date: Sun Dec 30 03:30:56 2007 +0100 |
| |
| fix various comments |
| |
| Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> |
| |
| commit 7817cb2083d982923752fe0f12b67c0e7c09a027 |
| Author: Marcel Ziswiler <marcel@ziswiler.com> |
| Date: Sun Dec 30 03:30:46 2007 +0100 |
| |
| fix comments with new drivers organization |
| |
| Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> |
| |
| commit a9b410dc7d2a4721c408b13abfc037988150f145 |
| Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| Date: Fri Dec 28 12:50:59 2007 +0900 |
| |
| Remove the obsolete terse version of do_mii() |
| |
| We now have more useful version of do_mii() and everybody use it. |
| Gerald Van Baren says: |
| |
| > When I originally wrote the mii command 6(!) years ago, I wrote a |
| > verbose version that printed human readable decomposition of the flags, |
| > etc., and a terse one that didn't print as much stuff and thus had a |
| > smaller memory footprint. |
| > |
| > It sounds like the terse version has withered and died, apparently |
| > people are only using the verbose version (which is very understandable, |
| > I do myself). |
| |
| Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit 01c687aa6e065bd4faf80f723361e798941dd6b0 |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Thu Dec 27 13:42:56 2007 -0500 |
| |
| Do not reference sha1.c when building mkimage. |
| |
| remove sha1.o from mkimage linking since it isn't actually used. |
| |
| Signed-Off-By: Mike Frysinger <vapier@gentoo.org> |
| |
| commit b9173af73e524d37c812f210173cf83385c5171a |
| Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| Date: Thu Dec 27 15:39:54 2007 +0900 |
| |
| common/cmd_mii.c: Add sanity argc check |
| |
| If type mii command without arguments, we suffer from uninitialized argv[] |
| entries; for example we MIPS get stuck by TLB error. |
| |
| Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| |
| commit 500856eb1707ed17d9204baa61dd59948d3b2899 |
| Author: Rafal Jaworowski <raj@semihalf.com> |
| Date: Wed Jan 9 19:39:36 2008 +0100 |
| |
| API for external applications. |
| |
| This is an API for external (standalone) applications running on top of |
| U-Boot, and is meant to be more extensible and robust than the existing |
| jumptable mechanism. It is similar to UNIX syscall approach. See api/README |
| for more details. |
| |
| Included is the demo application using this new framework (api_examples). |
| |
| Please note this is still an experimental feature, and is turned off by |
| default. |
| |
| Signed-off-by: Rafal Jaworowski <raj@semihalf.com> |
| |
| commit 26a41790f8eba19ad450e18ae91351daf485b3e2 |
| Author: Rafal Jaworowski <raj@semihalf.com> |
| Date: Wed Jan 9 18:05:27 2008 +0100 |
| |
| Globalize envmatch() |
| |
| The newly introduced API (routines related to env vars) will need to call |
| it. |
| |
| Signed-off-by: Rafal Zabdyr <armo@semihalf.com> |
| |
| commit 6007f3251c0967adc13f2ed8be1b924ddc30124d |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Jan 9 15:14:46 2008 +0100 |
| |
| Coding Style cleanup, update CHANGELOG |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit fc6414eca55f1fc108fb12fc8cdc43bd8b4463f9 |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Tue Dec 18 04:29:55 2007 -0500 |
| |
| fix easylogo on big endian dev systems |
| |
| didnt realize how out of shape easylogo actually was until i tried using it. |
| this patch does byte swapping as need be on the input tga header since the tga |
| is in little endian but the host could just as well be big endian. i didnt |
| bother using bswap macros or such stuff from system headers as nothing in |
| POSIX dictates byte swapping functionality. |
| |
| Signed-Off-By: Mike Frysinger <vapier@gentoo.org> |
| |
| commit 38d299c2db81bd889c601b5dfc12c4e83ef83333 |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Tue Dec 18 03:23:25 2007 -0500 |
| |
| cleanup easylogo |
| |
| - make the Makefile not suck |
| - include proper headers for prototypes |
| - fix obvious broken handling of strchr() when handling '.' in filenames |
| |
| Signed-Off-By: Mike Frysinger <vapier@gentoo.org> |
| |
| commit 883e3925d99a8dd69c5b0201cba5b1887f88f95c |
| Author: raptorbrino@aim.com <raptorbrino@aim.com> |
| Date: Thu Dec 13 21:23:28 2007 -0500 |
| |
| Fix build problems under Cygwin |
| |
| This patch allows u-boot to build without error in a cygwin |
| environment. Cygwin does not define __u64 in it's |
| include/asm/types.h file. The -idirafter flag in the u-boot |
| build causes the inclusion of the cygwin types.h file as opposed |
| to u-bot/include/asm/types.h file which does define __u64. |
| Subsequently, sha1.c compile fails due to unknown symbol. |
| |
| Signed-off-by: Brian Miller <raptorbrino@netscape.net> |
| |
| commit 43ef1c381f9195504a2488f5cb909227eb97d475 |
| Author: Hans-Christian Egtvedt <hcegtvedt@atmel.com> |
| Date: Fri Nov 30 17:29:59 2007 +0100 |
| |
| cmd_bmp: Add support for displaying gzip compressed bmps |
| |
| The existing code can show information about a gzip compressed BMP |
| image, but can't actually display it. |
| |
| Therefore, move the decompression code out of bmp_info() and use it in |
| bmp_display() as well in order to display a compressed BMP image. |
| |
| Also, clean things up a bit and fix a memory leak while we're at it. |
| |
| [hskinnemoen@atmel.com: a bit of refactoring] |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit d197ffd8172c6fdef38733424640a9a47295d6e9 |
| Author: Guennadi Liakhovetski <lg@denx.de> |
| Date: Thu Nov 29 21:15:56 2007 +0100 |
| |
| Fix and optimize MII operations on FEC (MPC8xx) controllers |
| |
| This patch fixes several issues at least on a MPC885 based system with two |
| FEC interfaces used in MII mode. |
| |
| 1. PHY discovery should first read PHY_PHYIDR2 register and only then |
| PHY_PHYIDR1 like cpu/mpc8xx/fec.c::mii_discover_phy() does it, |
| otherwise the values read are wrong. Also notice, that PHY discovery |
| cannot work on MPC88x / MPC87x in setups with both FECs active at all |
| in its present form, because for both interfaces the registers from FEC |
| 1 are used to communicate over MII. |
| |
| 2. Remove code duplication for resetting the FEC by isolating it into a |
| separate function. |
| |
| 3. Initialize MII on FEC 1 when communicating over FEC 2 in fec_init(). |
| |
| 4. Optimize mii_init() to only reset the FEC 1 controller once. |
| |
| 5. Fix a typo in mii_init() using index i instead of j thus potentially |
| leading to unpredictable results. |
| |
| Signed-off-by: Guennadi Liakhovetski <lg@denx.de> |
| |
| commit 6a5e1d75bf106fa157e9ce68bcaf4b13e8a1d214 |
| Author: Guennadi Liakhovetski <lg@denx.de> |
| Date: Tue Nov 20 13:14:20 2007 +0100 |
| |
| Fix endianness conversions in rtl8169 driver |
| |
| It is unclear on what platforms this driver has been tested, since |
| noone up to now defines CONFIG_RTL8169 in the board configuration |
| header. Now it has been fixed for a big-endian mpc8241 based |
| linkstation platform. This patch presents the necessary endianness |
| conversion fixes. |
| |
| Signed-off-by: Guennadi Liakhovetski <lg@denx.de> |
| |
| commit 58694f9709c0c3e3178e349ae748d98cfb0c639a |
| Author: Zhang Wei <wei.zhang@freescale.com> |
| Date: Thu Jan 3 10:51:15 2008 +0800 |
| |
| Add Ctrl combo key support to usb keyboard driver. |
| |
| Ctrl combo key support is added, which is very useful to input Ctrl-C |
| for interrupt current job. |
| Also add usb_event_poll() calling to usb_kbd_testc(), which can get |
| key input when tstc() is called. |
| |
| Signed-off-by: Zhang Wei <wei.zhang@freescale.com> |
| Signed-off-by: Markus Klotzbuecher <mk@denx.de> |
| |
| commit 07eb02687f008721974a2fb54cd7fdc28033ab3c |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Jan 9 13:43:38 2008 +0100 |
| |
| Coding Style clenaup; update CHANGELOG |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit c26acc1a43b31ddca5add42fd0360ff0eee90c80 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Thu Dec 27 17:13:11 2007 +0100 |
| |
| Remove bit swapping in Xilinx Spartan bitfile loading |
| |
| This patch removes the unnecessary bit swapping when |
| booting .bit files with the 'fpga loadb' command. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit 437fc7327f0611f82937858f2d80e4cd61b40984 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Thu Dec 27 17:13:05 2007 +0100 |
| |
| Fix MSB check in Xilinx Spartan slave serial mode |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit 3bff4ffa33729a42645e328a21e8d16488872958 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Thu Dec 27 17:12:56 2007 +0100 |
| |
| Add new Xilinx Spartan FPGA types |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit 21d39d598c4e74d4e7761608c79dba2715d40a4c |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Thu Dec 27 17:12:43 2007 +0100 |
| |
| Add pre and post configuration callbacks for Spartan FPGAs |
| |
| This patch adds a post configuration callback for Spartan2/3 FPGAs. |
| pre and post configuration callback are now optional and |
| not called when the function pointer is set to NULL. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit 0133502e39ff89b67c26cb4015e0e7e8d9571184 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Thu Dec 27 17:12:34 2007 +0100 |
| |
| Improve configuration of FPGA subsystem |
| |
| This patch removes the FPGA subsystem configuration through |
| the CONFIG_FPGA bitmask configuration option. |
| |
| See README for the new options: |
| |
| CONFIG_FPGA, |
| CONFIG_FPGA_<vendor>, |
| CONFIG_FPGA_<family> |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit 95c6bc7d4a3588b452baca610f8c795a83630477 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Thu Dec 27 16:55:17 2007 +0100 |
| |
| Add Epson RX8025 RTC support |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit 1208a2dfde02bedd3c5bda29a606632b8e0be058 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Thu Dec 27 16:57:23 2007 +0100 |
| |
| serial: Make default_serial_console() a weak function |
| |
| With this patch it is possible to reimplement default_serial_console() |
| in board specific code. This will be done in the upcomming PMC440 |
| U-Boot port. This also allows the lwmon board maintainer to |
| remove the '#if !defined(CONFIG_LWMON) ...' from common/serial.c. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit d16471ee05ce7ac5392bc0e9fe3ff4b58a768f33 |
| Author: Harald Welte <laforge@openmoko.org> |
| Date: Wed Dec 19 14:14:47 2007 +0100 |
| |
| add 'terminal program' functionality |
| |
| This patch adds a 'cu' like serial terminal command to u-boot |
| using which you can access other serial ports from the system console. |
| |
| OpenMoko uses this in their Neo1973 phones to get access to the GSM |
| Modem and GPS chip from the bootloader. |
| |
| Signed-off-by: Harald Welte <laforge@openmoko.org> |
| |
| commit 62d4f4365341576f5a5307b2b205a5aa2e3c6be6 |
| Author: Harald Welte <laforge@openmoko.org> |
| Date: Wed Dec 19 14:12:53 2007 +0100 |
| |
| Re-introduce the 'nand read.oob' and 'nand write.oob' commands |
| that used to exist with the legacy NAND code |
| |
| Signed-off-by: Harald Welte <laforge@openmoko.org> |
| |
| commit f540c42d9564854b19ce9bbb70affe172529fe70 |
| Author: Harald Welte <laforge@openmoko.org> |
| Date: Wed Dec 19 14:09:58 2007 +0100 |
| |
| Fix building with CRAMFS but not JFFS2 support |
| |
| Signed-off-by: Harald Welte <laforge@openmoko.org> |
| |
| commit 23d0baf967fecdaf1804f045f6339337c5607eec |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sat Dec 22 15:52:58 2007 +0100 |
| |
| Allow CONFIG_AUTO_COMPLETE and command history CONFIG_CMDLINE_EDITING at the sametime |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 23776ff292966a85d811126933830bed48211826 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Tue Dec 11 10:53:12 2007 +0100 |
| |
| ARM: support board-specific ethernet PHY init |
| |
| Add until the new phylib will be arrived |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 7b74ebe723e576baedf5a8b6240589b19b845a1b |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sat Dec 8 16:34:08 2007 +0100 |
| |
| IXP: Add full baud-rate support for ixp42x, ixp45x and ixp46x |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit a2df4da31b1a1e41e3e9e1358cfc52b806046ce1 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sun Dec 9 11:01:10 2007 +0100 |
| |
| Add missing file in gitignore and comments |
| |
| based on Linux source tree's .gitignore files |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 435dc8fcdb3bc61d3d490773a8f369f98a20c868 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Jan 9 11:36:21 2008 +0100 |
| |
| Coding Style cleanup, update CHANGELOG |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit b2e2142c500c48a57f18f9dd30e66c13caea0971 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Jan 9 10:38:58 2008 +0100 |
| |
| POST: Execute SPR test after relocation |
| |
| On LWMON5 we now use d-cache as init-ram and stack. The SPR POST test uses |
| self modifying code and this doesn't work with stack in d-cache, since |
| I can't move the code from d-cache to i-cache. We move the SPR test to |
| be executed a little later, after relocation. Then stack is located in |
| SDRAM and this self-modifying code is no problem anymore. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 8f24e0637ae113500d8bd60d80d57afcc0aa8bde |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Jan 9 10:28:20 2008 +0100 |
| |
| ppc4xx: Change LWMON5 to not use OCM for init-ram and POST anymore |
| |
| This patch configures the LWMON5 port to use d-cache as init-ram and |
| the unused GPT0_COMP6 as POST WORD storage. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 1754f50b710194f886b6f2831803d8960171a14d |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Jan 9 10:25:46 2008 +0100 |
| |
| ppc4xx: Add CFG_POST_ALT_WORD_ADDR to support non OCM POST WORD storage |
| |
| The privious 4xx POST implementation only supported storing the POST |
| WORD in OCM. Since we need to reserve the OCM on LWMON5 for the logbuffer |
| we need to store the POST WORD in some other non volatile location. |
| This patch adds CFG_POST_ALT_WORD_ADDR to specify an address for such |
| a location. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit e02c521d94b45d7b05aa522e4ccde6b74bf5fe57 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Jan 9 10:23:16 2008 +0100 |
| |
| ppc4xx: Add 44x cache locking to better support init-ram in d-cache |
| |
| This patch adds support for locking the init-ram/stack in d-cache, |
| so that other regions may use d-cache as well |
| |
| Note, that this current implementation locks exactly 4k of d-cache, |
| so please make sure that you don't define a bigger init-ram area. Take |
| a look at the lwmon5 440EPx implementation as a reference. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 0ddb89601a8d29e808db450366752ffdc6267c53 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Jan 9 10:16:33 2008 +0100 |
| |
| Fix memset bug in ext2fs_read_file() |
| |
| ext2fs_read_file() had the function arguments swapped. |
| |
| Pointed out by Mike Montour, 19 Dec 2007 22:34:25 -0800 |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 32d6f1bc09175f3b77469771e839bc7255a9f22e |
| Author: Markus Klotzbücher <mk@denx.de> |
| Date: Tue Jan 5 08:17:15 1988 +0100 |
| |
| Fix problems with usb storage devices on MPC5200 /TQM5200 |
| |
| The MPC5200 OHCI controller operates in big endian, so |
| CFG_OHCI_BE_CONTROLLER must be defined for it to work properly. |
| |
| Signed-off-by: Markus Klotzbuecher <mk@denx.de> |
| |
| commit 46f6e5019048b103d7693d5310de0f1cfbaf4c19 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Jan 8 22:58:27 2008 +0100 |
| |
| Fix compile problem with new env code. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 64b3727b9779d86127cd576e392a987de5ebb9fd |
| Author: Markus Klotzbücher <mk@denx.de> |
| Date: Tue Nov 27 10:23:20 2007 +0100 |
| |
| tools: fix fw_printenv tool to compile again |
| |
| This patch updates the fw_printenv/fw_setenv userspace tool to include |
| the correct MTD header in order to compile against current kernel |
| headers. Backward compatibility is preserved by introducing an option |
| MTD_VERSION which can be set to "old" for compilation using the old MTD |
| headers. Along with this a number of warnings are fixed. |
| |
| Signed-off-by: Markus Klotzbuecher <mk@denx.de> |
| |
| commit 1f84021a85abeb837d2ce0dc84297b4f1d45d516 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Tue Jan 8 15:40:09 2008 +0100 |
| |
| ppc4xx: assign PCI interrupts on seuqoia boards |
| |
| Some operating systems rely on assigned PCI interrupts. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit 6e9233d30afe57cb6e148fbfa4895e7810196fac |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Tue Jan 8 15:50:49 2008 +0100 |
| |
| ppc4xx: Move cpu/ppc4xx/vecnum.h into include path |
| |
| This patch allows the use of 4xx interrupt vector number defines |
| in board specific code outside cpu/ppc4xx. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit 580d1d3186a2bc6dbdb626941b716dae1788e51e |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Tue Jan 8 15:39:01 2008 +0100 |
| |
| ppc4xx: Fix UIC2 vector number base |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit ff5fb8a6ccba56e3482d0e297d8cfb7faa040811 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Tue Jan 8 12:49:58 2008 +0100 |
| |
| ppc4xx: Update PLB/PCI divider for PMC440 board |
| |
| This patch updates the PLB/PCI divider when running at |
| 400MHz CPU frequency from 4 to 3 which results in 44MHz PCI sync clock. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit 7d5d75633174867316a0c0f2fca5ceb2cf312cde |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Tue Jan 8 11:13:09 2008 +0100 |
| |
| ppc4xx: Disable error message when no NAND chip is installed on PMC440 |
| |
| Add CFG_NAND_QUIET_TEST option to disable error message when |
| no NAND chip is installed on PMC440 boards. |
| |
| Disable a couple of config defines that are only used for NAND_U_BOOT. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit c83d7ca4dadd44ae430235077f63b64a11f36f6e |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Jan 8 22:58:27 2008 +0100 |
| |
| Fix compile problem with new env code. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 6de66b35426312a21174a9bf0576a094e2904bea |
| Author: Markus Klotzbücher <mk@denx.de> |
| Date: Tue Nov 27 10:23:20 2007 +0100 |
| |
| tools: fix fw_printenv tool to compile again |
| |
| This patch updates the fw_printenv/fw_setenv userspace tool to include |
| the correct MTD header in order to compile against current kernel |
| headers. Backward compatibility is preserved by introducing an option |
| MTD_VERSION which can be set to "old" for compilation using the old MTD |
| headers. Along with this a number of warnings are fixed. |
| |
| Signed-off-by: Markus Klotzbuecher <mk@denx.de> |
| |
| commit ad3006fe7e84667021753b74247b0bafd97ba35f |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Mon Jan 7 23:47:32 2008 -0500 |
| |
| LIBFDT: use memmove() instead of memcpy() |
| |
| This is partial patch from the DTC/libfdt |
| commit 67b6b33b9b413a450a72135b5dc59c0a1e33e647 |
| Author: David Gibson <david@gibson.dropbear.id.au> |
| Date: Wed Nov 21 11:56:14 2007 +1100 |
| |
| The patch also fixes one genuine bug caught by valgrind - |
| _packblocks() in fdt_rw.c was using memcpy() where it should have been |
| using memmove(). |
| |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit aec7135bc300e3340d18f203347ee00c5b5f68c0 |
| Author: David Gibson <david@gibson.dropbear.id.au> |
| Date: Mon Dec 17 14:42:07 2007 +1100 |
| |
| libfdt: Add more documentation (patch the seventh) |
| |
| This patch adds more documenting comments to libfdt.h. Specifically, |
| these document the read/write functions (not including fdt_open_into() |
| and fdt_pack(), for now). |
| |
| Signed-off-by: David Gibson <david@gibson.dropbear.id.au> |
| |
| commit 9d4450b5adc36623e9c1de1f92539db77ad0c57e |
| Author: David Gibson <david@gibson.dropbear.id.au> |
| Date: Mon Dec 17 14:41:52 2007 +1100 |
| |
| libfdt: Add more documentation (patch the sixth) |
| |
| This patch adds some more documenting comments to libfdt.h. |
| Specifically this documents all the write-in-place functions. |
| |
| Signed-off-by: David Gibson <david@gibson.dropbear.id.au> |
| |
| commit b60af3d4c1680487ee37e11aa1b3db6dec04d8f0 |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Sat Dec 29 22:45:27 2007 -0500 |
| |
| Fine grained per property /chosen updating. |
| |
| Implement a suggestion by Scott Wood to make the /chosen handling fine |
| grained. Don't overwrite pre-existing properties on a per-property basis, |
| so if /chosen exists but a necessary /chosen/property doesn't, it gets |
| created. If a /chosen property exists, it is NOT overwritten unless the |
| "force" flag is true. |
| |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit 238cb7a423c6eaa36496efb788cfb9798cea7f95 |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Sat Jan 5 15:33:29 2008 -0500 |
| |
| Improve the FDT help message. |
| |
| Add a note that "fdt copy" makes the new address active. |
| Remove most of the extra hints at the end of the fdt help. |
| |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit ea6d8be153ceaf16958f8009cea6d75f3ff58d92 |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Sat Jan 5 14:52:04 2008 -0500 |
| |
| Support setting FDT properties with optional values. |
| |
| Fix a bug found and documented by Bartlomiej Sieka where the optional |
| value on "fdt set <path> <prop> [<val>]" wasn't optional. |
| |
| => fdt mknode / testnode |
| => fdt print /testnode |
| testnode { |
| }; |
| => fdt set /testnode testprop |
| => fdt print /testnode |
| testnode { |
| testprop; |
| }; |
| |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit 22fb2246df91bfc840d87f0c5910818bad55577a |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Fri Dec 28 11:56:30 2007 +0100 |
| |
| Add fdt_find_and_setprop() to fdt_support.h |
| |
| fdt_find_and_setprop() is used by several 4xx boards and it's |
| missing in the appropriate header. This patch eliminates a |
| warning when building U-Boot for such boards. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Acked-by: Stefan Roese <sr@denx.de> |
| |
| commit 802b769bac17b0560d3535a42c502469ee190cd1 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Jan 8 18:39:30 2008 +0100 |
| |
| ppc4xx: Return 0 on success in 4xx ethernet driver |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 6775c68683a53c7abc778774641aac6f833a2cbf |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Tue Jan 8 09:59:49 2008 -0600 |
| |
| mpc83xx: fix missed pci_hose -> hose conversion for new libfdt code |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 94fab25f5f1a7d1c0cc63c17e813ea8943fe49c7 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Thu Dec 20 16:28:34 2007 -0600 |
| |
| mpc83xx: rm remaining FLAT_TREE code |
| |
| ..in board pci.c files |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit b3458d2cd55d01732e30a76d898afd99e871cd67 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Thu Dec 20 15:57:28 2007 -0600 |
| |
| mpc83xx: remove FLAT_TREE code |
| |
| need to rm it from pci code, too! |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 5b8bc606c61456566af6912f818a153b6b06f242 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Thu Dec 20 14:09:22 2007 -0600 |
| |
| mpc83xx: convert to using do_fixup_*() |
| |
| convert to using simpler mpc85xx style fdt update code; streamline by |
| eliminating macros OF_SOC, OF_CPU, etc. which allows us to rm |
| the old school FLAT_TREE code from 83xx (since the sbc8349 was just |
| converted over to using libfdt). |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit e496865ecc31a2fe2f9abfe798334bb02aaf05ab |
| Author: Paul Gortmaker <paul.gortmaker@windriver.com> |
| Date: Thu Dec 20 12:58:51 2007 -0500 |
| |
| sbc8349: enable libfdt by default on WRS SBC8349 board. |
| |
| Make libfdt the default for the WRS SBC8349 board. |
| Parallel of commit 35cc4e4823668e8745854899cfaedd4489beb0ef |
| done for the other 83xx based boards. Also fix a typo in CONFIG_PCI. |
| |
| Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> |
| |
| commit 2408b3f20bcbdd9c6c397cd03ab0d71d54680a40 |
| Author: Paul Gortmaker <paul.gortmaker@windriver.com> |
| Date: Thu Dec 20 12:58:16 2007 -0500 |
| |
| sbc8349: migrate board to libfdt |
| |
| This adds libfdt support code for the Wind River sbc8349 board. |
| |
| Parallel of commit 3fde9e8b22cfbd7af489214758f9839a206576cb for |
| the other Freescale 83xx boards. |
| |
| Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> |
| |
| commit 27a256a90cc86392ac9bf0039a3afe638ec2c18d |
| Author: Paul Gortmaker <paul.gortmaker@windriver.com> |
| Date: Thu Dec 20 12:56:19 2007 -0500 |
| |
| sbc8349: Remove board specific ECC code |
| |
| ECC code is now shared for all 83xx boards, so remove board specific one. |
| See commit daab8c67d2defef73dc26ab07f0c3afd1b05d019 for reference. |
| |
| Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> |
| |
| commit a1e1ac849249310e5e2e5c7148e9fb353a8317a7 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Thu Dec 20 01:30:48 2007 -0600 |
| |
| mpc83xx: Remove CONFIG options related to OF that we dont use (on 837x) |
| |
| continuation of commit 37395fa2b0d9d617f28d44ca11592260ef16105a to 837x |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit ccf21c311e68d48399eff1e72936052885f6e3f7 |
| Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> |
| Date: Thu Dec 6 16:43:40 2007 +0100 |
| |
| Add support CONFIG_UEC_ETH3 in MPC83xx |
| |
| Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> |
| |
| commit e6af9932d31171e35db880e7b2f29f903b1b7660 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Mon Nov 26 11:00:54 2007 -0600 |
| |
| Remove CONFIG options related to OF that we dont use |
| |
| The MPC8360E MDS config defined: |
| CONFIG_OF_HAS_BD_T |
| CONFIG_OF_HAS_UBOOT_ENV |
| |
| Which we don't use or ever needed. This seems like copy-paste feature creep. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit f602082b4b7ed4ee16432067cc67a0a24fedc715 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Mon Dec 10 14:16:22 2007 -0600 |
| |
| mpc83xx: supress compiler warning |
| |
| mpc8360emds.c: In function ‘ft_board_setup’: |
| mpc8360emds.c:335: warning: assignment discards qualifiers from pointer target type |
| mpc8360emds.c:345: warning: assignment discards qualifiers from pointer target type |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit c16e44fa835fb9eec982d919863a04e2f78e5ce7 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Tue Nov 27 14:17:29 2007 -0600 |
| |
| mpc83xx: fix remaining fdt_find_node_by_path references |
| |
| rename to fdt_path_offset |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 921d4b19ad1be704df58725485d9292dc0414adf |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Mon Nov 19 12:30:09 2007 -0600 |
| |
| mpc83xx: fix CFG_ENV_ADDR and CFG_ENV_SECT_SIZE definitions for 837x |
| |
| Fix the definitions of CFG_ENV_ADDR and CFG_ENV_SECT_SIZE for 837x. |
| This change guarantees that the environment will be located on the |
| first flash sector after the U-Boot image. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 24f868433b50ecbaa88e118aadc7bd254013c6ae |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Fri Nov 9 14:28:08 2007 -0600 |
| |
| mpc83xx: mpc8360 rev.2.1 erratum 2: replace rgmii-id with rgmii-rxid |
| |
| u-boot itself uses GMII mode on the 8360. Fix up UCC phy-connection-type |
| properties in the device tree so the PHY gets configured for internal delay on |
| RX only by the OS, as prescribed by mpc8360 rev. 2.1 pb mds erratum #2. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 22b448dbfbe2a98f01ff4adc3c3979f8c541ad7b |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Tue Sep 18 12:41:15 2007 +0800 |
| |
| mpc83xx: update the CREDITS and MAINTAINERS |
| |
| update the CREDITS and MAINTAINERS. |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| |
| commit b21add4b42af7b767448251b599b91066a160e0d |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Tue Sep 18 12:40:21 2007 +0800 |
| |
| mpc83xx: add MAINTAINER and MAKEALL entries for the mpc837xemds |
| |
| Add the MAINTAINER and MAKEALL entries for mpc837xemds |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| |
| commit f8900ce9094c462355eb792eea264ff16ac8fd16 |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Tue Sep 18 12:38:53 2007 +0800 |
| |
| mpc83xx: Add the MPC837xEMDS board readme |
| |
| Add the README.mpc837xemds to /doc |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| |
| commit 19580e660cc8da49f16536a8bd78c047c7bc12e5 |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Tue Sep 18 12:37:57 2007 +0800 |
| |
| mpc83xx: Add the support of MPC837xEMDS board |
| |
| The MPC837xEMDS board support: |
| * DDR2 400MHz hardcoded and SPD init |
| * Local bus NOR Flash |
| * I2C, UART, MII and RTC |
| * eTSEC RGMII |
| * PCI host |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| |
| commit 555da61702771fe0f76f3de23b4e7590f3704161 |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Tue Sep 18 12:36:58 2007 +0800 |
| |
| mpc83xx: Add the support of MPC8315E SoC |
| |
| The MPC8315E SoC including e300c3 core and new IP blocks, |
| such as TDM, PCI Express and SATA controller. |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| |
| commit 03051c3d35c9981ceaa059005660e699f3eacf1c |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Tue Sep 18 12:36:11 2007 +0800 |
| |
| mpc83xx: Add the support of MPC837x SoC |
| |
| The MPC837x SoC including e300c4 core and new IP blocks, |
| such as SDHC, PCI Express and SATA controller. |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| |
| commit 651d96f7e4c84adcdb98ef07ec878c20326e3359 |
| Author: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Date: Wed Nov 14 18:54:53 2007 +0300 |
| |
| MPC8360E-MDS: configure and enable second UART |
| |
| Despite user manual, BCSR9.7 is negated (high) on HRST, so |
| UART2 is disabled. Fix that and configure QE pins properly. |
| |
| Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> |
| |
| commit b2893e1fcb28fad8c8b317104df8cee0142c7631 |
| Author: Timur Tabi <timur@freescale.com> |
| Date: Mon Nov 5 09:34:06 2007 -0600 |
| |
| 83xx: fix CFG_ENV_ADDR and CFG_ENV_SECT_SIZE definitions |
| |
| Fix the definitions of CFG_ENV_ADDR and CFG_ENV_SECT_SIZE for all of the |
| currently-defined 83xx boards. This change guarantees that the environment |
| will be located on the first flash sector after the U-Boot image. |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit e05329516a13616b53240cd85b739217c2bf87f1 |
| Author: Larry Johnson <lrj@acm.org> |
| Date: Fri Jan 4 13:27:02 2008 -0500 |
| |
| ppc4xx: Remove weak binding from common Denali data-eye search code |
| |
| Now that there are no board-specific versions of |
| "denali_core_search_data_eye()", the weak binding on the common version |
| can be removed. |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit 5ba576c01602fd328800a427964c36a0a05c5dce |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Jan 5 09:13:46 2008 +0100 |
| |
| ppc4xx: Remove unused CONFIG_ECC_ERROR_RESET from 44x_spd_ddr2.c |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 845c6c95dbfe6c915ce68a0a115852fa17932fb4 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Jan 5 09:12:41 2008 +0100 |
| |
| ppc4xx: Update Katmai/44x_spd_ddr2.c code for optimal DDR2 setup |
| |
| On Katmai the complete auto-calibration somehow doesn't seem to |
| produce the best results, meaning optimal values for RQFD/RFFD. |
| This was discovered by GDA using a high bandwidth scope, |
| analyzing the DDR2 signals. GDA provided a fixed value for RQFD, |
| so now on Katmai "only" RFFD is auto-calibrated. |
| |
| This patch also adds RDCC calibration as mentioned on page 7 of |
| the AMCC PowerPC440SP/SPe DDR2 application note: |
| "DDR1/DDR2 Initialization Sequence and Dynamic Tuning" |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 49db47b8ae6afff2b898be312948ff501357dc80 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Wed Jan 2 16:48:42 2008 +0100 |
| |
| ppc4xx: Remove sdram.h from PMC440 board |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit 34065a2ce0d8972f2ec6652076014ab243d2ce8a |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Wed Jan 2 16:48:34 2008 +0100 |
| |
| ppc4xx: use common denali core defines and data eye search code for PMC440 |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit 9ac6b6f3d3f1b072d89268b2efe47e95e6659489 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Wed Jan 2 12:05:14 2008 +0100 |
| |
| ppc4xx: More cleanup for esd's LCD code |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit fe9c26b330a21ce73e52b5bd347d725cb81e3cfb |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jan 4 12:00:01 2008 +0100 |
| |
| ppc4xx: Fix Sequoia NAND booting target |
| |
| The Sequoia NAND booting target now uses the recently extracted |
| cpu/ppc4xx/denali_data_eye.c file too. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 0ddd969aec532bd7eae30fc09590488a3aaa629a |
| Author: Lawrence R. Johnson <lrj@acm.org> |
| Date: Thu Jan 3 15:02:02 2008 -0500 |
| |
| ppc4xx: Use CFG_4xx_GPIO_TABLE to configure Korat board |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit b05e8bf58be9d8956fdfde3d8c8e87c140414663 |
| Author: Lawrence R. Johnson <lrj@acm.org> |
| Date: Fri Jan 4 02:11:56 2008 -0500 |
| |
| ppc4xx: Use CFG_4xx_GPIO_TABLE to configure Sequoia board |
| |
| Note: this patch changes the configuration of some GPIO registers: |
| |
| Register Old Value New Value |
| --------------- ---------- ---------- |
| DCR GPIO0_TCR 0x0000000F 0x0000F0CF |
| DCR GPIO0_TSRH 0x55005000 0x00000000 |
| DCR GPIO1_TCR 0xC2000000 0xE2000000 |
| DCR GPIO1_TSRL 0x0C000000 0x00200000 |
| DCR GPIO1_ISR2L 0x00050000 0x00110000 |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit 5ab884b254ca2e707ab50545cd705f30108cf491 |
| Author: Lawrence R. Johnson <lrj@acm.org> |
| Date: Thu Jan 3 18:54:00 2008 -0500 |
| |
| ppc4xx: Add functionality to GPIO support |
| |
| This patch makes two additions to GPIO support: |
| |
| First, it adds function gpio_read_in_bit() to read the a bit from the |
| GPIO Input Register (GPIOx_IR) in the same way that function |
| gpio_read_out_bit() reads a bit from the GPIO Output Register |
| (GPIOx_OR). |
| |
| Second, it modifies function gpio_set_chip_configuration() to provide |
| an additional option for configuring the GPIO from the |
| "CFG_4xx_GPIO_TABLE". |
| |
| According to the 440EPx User's Manual, when an alternate output is used, |
| the three-state control is configured in one of two ways, depending on |
| the particular output. The first option is to select the corresponding |
| alternate three-state control in the GPIOx_TRSH/L registers. The second |
| option is to select the GPIO Three-State Control Register (GPIOx_TCR) in |
| the GPIOx_TRSH/L registers, and set the corresponding bit in the |
| GPIOx_TCR register to enable the output. For example, the Manual |
| specifies configuring the GPIO00 Alternate 1 Signal (PreAddr07) to use |
| the alternate three-state control (first option), and specifies |
| configuring the GPIO32 Alternate 1 Signal (USB2OM0) with the output |
| enabled in the GPIOx_TCR register (second option). |
| |
| Currently, gpio_set_chip_configuration() configures all alternate signal |
| outputs to use the first option. This patch allow the second option to |
| be selected by setting the "out_val" element in the table entry to |
| "GPIO_OUT_1". The first option is used when the "out_val" element is |
| set to "GPIO_OUT_0". Because "out_val" is not currently used when an |
| alternate signal is selected, and because all current GPIO tables set |
| "out_val" to "GPIO_OUT_0" for all alternate signals, this patch should |
| not change any existing configurations. |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit 196404cdc1de495d6182e84731c200fc5748df15 |
| Author: Larry Johnson <lrj@arlinx.com> |
| Date: Sun Dec 30 01:01:54 2007 -0500 |
| |
| PPC4xx: Remove sdram.h from board/lwmon5 |
| |
| These definitions are now in "include/ppc440.h". |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit ef16fccf96e55eab93fe25d03ebe2e9b56e5332b |
| Author: Larry Johnson <lrj@arlinx.com> |
| Date: Sun Dec 30 01:01:32 2007 -0500 |
| |
| PPC4xx: Use common code for LWMON5 board SDRAM support |
| |
| This patch also modifies the functionality of the code so that the data-eye |
| search is now done with with the cache disabled. |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit 62cc3951ab72135d9c101f1845b794e63a0fa189 |
| Author: Larry Johnson <lrj@arlinx.com> |
| Date: Sun Dec 30 01:01:14 2007 -0500 |
| |
| PPC4xx: Remove sdram.h from board/amcc/sequoia |
| |
| These definitions are now in "include/ppc440.h". |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit ce3902e1765bbfb07cf5bbe98be9a68e3009996a |
| Author: Larry Johnson <lrj@arlinx.com> |
| Date: Sun Dec 30 01:00:50 2007 -0500 |
| |
| PPC4xx: Use common code for Sequoia board SDRAM support |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit 8b0c5c127690335758100c25eaec2b84db97c101 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Thu Dec 27 16:58:41 2007 +0100 |
| |
| net: Add CONFIG_NET_DO_NOT_TRY_ANOTHER option |
| |
| When CONFIG_NET_DO_NOT_TRY_ANOTHER is defined U-Boot's |
| networking stack does not automatically switch to |
| another interface. This patch does not touch the default |
| behavior. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 505be87a65e4f87ad7d8da1d57ea4dcd487d7e32 |
| Author: Upakul Barkakaty <upakul@gmail.com> |
| Date: Thu Nov 29 12:16:13 2007 +0530 |
| |
| NET: Proper return code handling in eth_init() function in file eth.c |
| |
| This patch modifies the return code handling in the eth_init() |
| function, to be compatible with the handling of the return codes in |
| the other network stack files. It now returns a 0 on Success and -1 on |
| error. |
| |
| Signed-off-by: Upakul Barkakaty <upakul.barkakaty@conexant.com> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 5ca2d0953e4579a80810966cca2077e20d912c97 |
| Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| Date: Mon Nov 19 20:27:04 2007 +0900 |
| |
| net/eth.c: Fix env_enetaddr signed overflow |
| |
| Assigning the output of simple_strtoul(CB:A9:87:65:43:21) to `char', we are |
| warned as below: |
| |
| U-Boot 1.2.0 (Aug 30 2007 - 08:27:37) |
| |
| DRAM: 256 MB |
| Flash: 32 MB |
| In: serial |
| Out: serial |
| Err: serial |
| Net: NEC-Candy |
| Warning: NEC-Candy MAC addresses don't match: |
| Address in SROM is 00:00:4C:80:92:A2 |
| Address in environment is FFFFFFCB:FFFFFFA9:FFFFFF87:65:43:21 |
| |
| This patch changes env_enetaddr type from `char' to `unsigned char'. |
| |
| Cc: Masaki Ishikawa <ishikawa-masaki@cnt.mxe.nes.nec.co.jp> |
| Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit f85b60710571b37293d2233933b76e2aa3db5635 |
| Author: Rafal Jaworowski <raj@semihalf.com> |
| Date: Thu Dec 27 18:19:02 2007 +0100 |
| |
| Introduce new eth_receive routine |
| |
| The purpose of this routine is receiving a single network frame, outside of |
| U-Boot's NetLoop(). Exporting it to standalone programs that run on top of |
| U-Boot will let them utilise networking facilities. For sending a raw frame |
| the already existing eth_send() can be used. |
| |
| The direct consumer of this routine is the newly introduced API layer for |
| external applications (enabled with CONFIG_API). |
| |
| Signed-off-by: Rafal Jaworowski <raj@semihalf.com> |
| Signed-off-by: Piotr Kruszynski <ppk@semihalf.com> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 5c740711f0ea5b51414b341b71597c4a0751be74 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Thu Jan 3 10:41:04 2008 -0600 |
| |
| 8610: Move include of config.h earlier. |
| |
| Include config.h earlier in the set of #includes |
| so as to avoid a incidental and duplicate definition |
| of CFG_CACHELINE_SIZE. |
| |
| Signed-off-by: Jon Loeliger |
| |
| commit 61d3421bdea090bd0399b14c3e10a3bebcc8d5ff |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Dec 4 10:53:34 2007 -0600 |
| |
| Don't slam #undef DEBUG in the 8641HPCN config file. |
| |
| Doing so prevents it from being individually set |
| and useful in other files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit ea9f7395ec362584e5e4f266bd0b0c4422cf6a4c |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Wed Nov 28 14:47:18 2007 -0600 |
| |
| Convert MPC8641HPCN to use libfdt. |
| |
| Assumes the presence of the aliases node in the DTS to |
| locate the ethernet, pci and serial nodes for fixups. |
| |
| Use consistent fdtaddr and fdtfile in environment variables. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit ce37422d0002e10490e268392e0c4e3028e52cec |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Jan 2 14:06:26 2008 +0100 |
| |
| cfi_flash: Fix bug in flash_isset() to use correct 32bit function |
| |
| This bug was detected on the LWMON5 target which has 2 Intel 16bit wide |
| flash chips connected to a 32bit wide port. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 1182e9f8e3b92fc372d64943293de53daa2e26cf |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Jan 2 15:58:44 2008 +0100 |
| |
| Fix compile problem introduced by "cleanup" commit 3dfd708c |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 1aaab9bfae0b3b2ee2b418c22c651280ee7b65c7 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Jan 2 15:54:45 2008 +0100 |
| |
| Make scripts and Makefiles POSIX compliant |
| |
| The bash builtin versions of the "test" (resp. "[") command allow |
| using "==" for string comparisons, but POSIX compatible implemen- |
| tations (like /usr/bin/test) insist on using "=" only. On such systems |
| you will see: |
| |
| $ /usr/bin/test a == a && echo OK |
| /usr/bin/test: ==: binary operator expected |
| |
| This patch fixes Makefiles and scripts to use POSIX style. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 3dfd708cc1b2a966ad454ca9ed125dd17dbadbcc |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Jan 2 12:38:43 2008 +0100 |
| |
| Minor coding style cleanup. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit e174ac34adf5d5653df12bc3cf19c52063a71269 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Dec 28 17:29:56 2007 +0100 |
| |
| ppc4xx: Coding style cleanup |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 8ba132cab18ae438b6dd5b0214c28a8fc0d976e5 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Fri Dec 28 17:07:24 2007 +0100 |
| |
| ppc4xx: Complete PMC440 board support |
| |
| This patch brings the PMC440 board configuration file. |
| Finally it enables the PMC440 board support. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit 407843a582560fc5231299561ab3c2b6b6cd3397 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Fri Dec 28 17:07:18 2007 +0100 |
| |
| ppc4xx: Add FPGA support and BSP commands for PMC440 boards |
| |
| This patch adds some BSP commands and FPGA booting support |
| for esd's PMC440 boards. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit 72c5d52aedcce35e4b4fa5895605554825b6a76f |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Fri Dec 28 17:07:14 2007 +0100 |
| |
| ppc4xx: Add initial esd PMC440 board files |
| |
| This patch adds the first files for the new esd PMC440 boards. |
| The next two patches will complete the PMC440 board support. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit f6e0f1f61896ce7729ba1bcea2ffbd138d3947f5 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Fri Dec 28 17:10:36 2007 +0100 |
| |
| ppc4xx: Add EEPROM write protection for PLU405 boards + misc. updates |
| |
| - add EEPROM write protection for esd PLU405 boards. |
| - initialize NAND GPIOs |
| - use correct io accessors |
| - cleanup |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit 77660c4b59055d621d2a8595bd4c18bb277268fc |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Fri Dec 28 17:10:44 2007 +0100 |
| |
| ppc4xx: use correct io accessors for esd's LCD code |
| |
| This patch fixes esd's LCD dectection code to work correctly with |
| newer gcc versions. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit b56bd0fcfc1c73db722e3462c8a9bf607ba7775e |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Fri Dec 28 17:10:42 2007 +0100 |
| |
| ppc4xx: Maintenance patch for VOH405 boards |
| |
| - add EEPROM write protection |
| - initialize NAND GPIOs |
| - use correct io accessors |
| - slow down I2C clock to 100kHz |
| - enable ext. I2C bus |
| - cleanup |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit c05569066dbcba3fdf36d4d1943df265dc316a86 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Dec 28 16:08:08 2007 +0100 |
| |
| ppc4xx: Enable 405EP PCI arbiter per default on all boards |
| |
| In an attmemt to clean up the 4xx start.S file, I removed the enabling |
| of the internal 405EP PCI arbiter. This is needed for multiple other |
| 405EP platforms, like most of the esd 405EP. Now the internal PCI |
| arbiter is enabled again per default as it has been before. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| Acked-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit bec9264616fb78273a1d93e87ff4b0b67c7bec1b |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Dec 28 15:53:46 2007 +0100 |
| |
| ppc4xx: Fix bug in cpu_init.c (405EP instead of 450EP) |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| Acked-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit fb83a65c60ab5ca12358b75f1257e5eee6cdbf79 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Dec 28 06:06:04 2007 +0100 |
| |
| ppc4xx: Fix compilation problem of kilauea/haleakala nand booting target |
| |
| Use correct link to nand_ecc now located in drivers/mtd/nand/ for the |
| platforms mentioned above. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit b568fd25574181a3b12ae3d66b2913903442cb83 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Thu Dec 27 17:03:46 2007 +0100 |
| |
| Remove CPCI440 board |
| |
| This board never left prototyping state and it |
| became a millstone round my neck. So remove it. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit c591dffe0cbacd896ccbad06011fe6d6afa080da |
| Author: Larry Johnson <lrj@arlinx.com> |
| Date: Thu Dec 27 11:28:51 2007 -0500 |
| |
| Add support for Korat PPC440EPx board |
| |
| These patches add support for the PPC440EPx-based "Korat" board to |
| U-Boot. They are based primarily on support for the Sequoia board. |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit 87dc096829e6a6363f4fdd73653b0093a85adbe0 |
| Author: Larry Johnson <lrj@arlinx.com> |
| Date: Sat Dec 22 15:16:25 2007 -0500 |
| |
| Add configuration file for Korat board |
| |
| This patch supplies the configuration file for the Korat PPC440EPx- |
| processor board. |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit 8eb52d5d982b764b39c88d9d1064d56c5397bfa5 |
| Author: Larry Johnson <lrj@arlinx.com> |
| Date: Sat Dec 22 15:16:11 2007 -0500 |
| |
| Add denali_data_eye.o and denali_spd_ddr2.o to PPC4xx Makefile |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit aba19604d848b2838cfb9ebe818909e6a216058e |
| Author: Larry Johnson <lrj@arlinx.com> |
| Date: Thu Dec 27 10:54:48 2007 -0500 |
| |
| Add 440EPx DDR2 SPD DIMM support |
| |
| This patch adds SPD DDR2 support for the 440EPx ("Denali") SDRAM |
| controller. It should also work on the 440GRx. It is based on the DDR2 |
| SPD code for the 440EP/440EPx, but makes no provision for DDR1 support. |
| |
| This code has been tested on prototype Korat boards with three Kingston |
| DIMMS: 512 MiB ECC (one rank), 512 MiB non-ECC (one rank) and 1 GiB ECC |
| (two ranks). The Korat board has a single DIMM socket, but support has |
| been provided (though not tested) for boards with two DIMM sockets. |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit 8a24a6963002cb867d5a6b70e3560f0b1467f55f |
| Author: Larry Johnson <lrj@arlinx.com> |
| Date: Sat Dec 22 15:15:30 2007 -0500 |
| |
| Copy 440EPx/GRx SDRAM data-eye search to common directory |
| |
| This patch creates a non-board-specific file for performing the SDRAM |
| data-eye search. It also adds ECC error checking to the test of valid |
| data on readback when ECC is enabled. |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit c46f53333b22b1f9098676bea8884fc7db820cf3 |
| Author: Larry Johnson <lrj@arlinx.com> |
| Date: Sat Dec 22 15:15:13 2007 -0500 |
| |
| Add definitions for 440EPx/GRx SDRAM controller to ppc440.h |
| |
| This patch adds the Denali SDRAM controller definitions to "ppc440.h". |
| It also fixes two typos in the definitions, so the board-specific |
| "sdram.h" files containing these definitions are also fixed to avoid |
| compiler warnings. |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit c348578bf612d0c56d8d376d23cae16defbd86af |
| Author: Larry Johnson <lrj@arlinx.com> |
| Date: Thu Dec 27 10:50:55 2007 -0500 |
| |
| Add Ethernet 1000BASE-X support for PPC4xx |
| |
| This patch adds a new switch: "CONFIG_PHY_DYNAMIC_ANEG". When this symbol |
| is defined, the PHY will advertise it's capabilities for autonegotiation |
| based on the capabilities shown in the PHY's status registers, including |
| 1000BASE-X. When "CONFIG_PHY_DYNAMIC_ANEG" is not defined, the PHY will |
| advertise hard-coded capabilities, as before. |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit 9e2c347151db5ae8acf5f18b99493cd53e6637e3 |
| Author: Larry Johnson <lrj@arlinx.com> |
| Date: Thu Dec 27 09:52:17 2007 -0500 |
| |
| Add driver for National Semiconductor LM73 temperature sensor |
| |
| This driver is based on the driver for the LM75. |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit 12618278688ea9b3d76536960a5ad2e3790fac40 |
| Author: Larry Johnson <lrj@arlinx.com> |
| Date: Sat Dec 22 15:14:00 2007 -0500 |
| |
| Add driver for STMicroelectronics M41T60 RTC |
| |
| This driver is based on the driver for the M41T11. In the intended |
| application, the RTC will be powered by a large capacitor, rather than a |
| battery. The driver therefore checks to see whether the RTC has lost |
| power. The chip's OUT bit is normally reset from its power-up state. If |
| the OUT bit is read as set, or if the date and time are not valid, then the |
| RTC is assumed to have lost power, and its date and time are reset to |
| 1900-01-01 00:00:00. |
| |
| Support for adjusting the speed of the clock to improve accuracy is |
| provided through an environment variable. |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit d3471173e14b7544bb60339eda8d3d3906694b0a |
| Author: Larry Johnson <lrj@arlinx.com> |
| Date: Sat Dec 22 15:34:39 2007 -0500 |
| |
| Use out_be32() and friends to access memory-mapped registers in sequoia.c |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit c68f59fe3ec16769f82b5fca7421983c336d3aac |
| Author: Larry Johnson <lrj@arlinx.com> |
| Date: Sat Dec 22 15:34:20 2007 -0500 |
| |
| Use definitions from "asm-ppc/mmu.h" in init.S for Sequoia |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit 0d9cdeac1d3fa8d62ed7d883acc950c364f5bda8 |
| Author: Larry Johnson <lrj@arlinx.com> |
| Date: Sat Dec 22 15:23:50 2007 -0500 |
| |
| Cosmetic changes to ECC POST for AMCC Denali core |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit 2e583d6c81034f80a267b89fa55498ae063ccef1 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Dec 26 20:20:19 2007 +0100 |
| |
| ppc4xx: Fix compilation problem in 405 cache POST test |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 42d55ea0bde06e47d5a3b49b0d91002acd8e5708 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Dec 22 12:20:09 2007 +0100 |
| |
| ppc4xx: Move virtual address of POST cache test to bigger address |
| |
| On Sequoia & LWMON5 the virtual address of the POST cache test is now |
| moved to a bigger address. This enables usage of more memory on those |
| boards. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit d91722102cf63f77a0148ed3f3d54a26d87575e9 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Dec 22 12:18:26 2007 +0100 |
| |
| ppc4xx: Fix problem in 44x cache POST routine |
| |
| As repoted by Larry Johnson, running "diag run cache" caused a crash |
| in U-Boot. This problem was introduced by a patch that removed the |
| TLB entry for the cache test after the test has completed. Since this |
| TLB was only setup once, a 2nd attempt to run this cache test |
| failed with a crash. Now this TLB entry is created every time the |
| routine is called. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit b0265b576bb8fa9465f99e99c323768b562fadc2 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Dec 21 07:51:29 2007 +0100 |
| |
| ppc4xx: Update Makalu fdt support |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit bf8324e4a50758daff8cddd04c6a2ff8ed775bea |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Dec 19 09:05:40 2007 +0100 |
| |
| ppc4xx: Add fdt support to AMCC Katmai eval board |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 328a340392a5df9aaf00792be989df73e750859e |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Dec 18 08:44:51 2007 +0100 |
| |
| ppc4xx: fdt: Cleanup setup of cpu node setup |
| |
| Now the cpu node setup ("timebase-frequency" and "clock-frequency") is |
| without using the absolute path to the cpu node. This makes it possible |
| to use this U-Boot version with both versions of cpu-node naming |
| "cpu@0" and the former "PowerPC,440EPx@0". |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 7812bc4a2e2436ebbc0ce5b4e99c1dfc2e77eb5b |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Dec 17 17:26:21 2007 +0100 |
| |
| ppc4xx: Fix lwmon5 compilation problem |
| |
| Now that the 440EPx ECC test is not board specific anymore |
| remove this Makefile. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 42ed33ffe135f618680f9d6e9712eb35a85bcb62 |
| Author: Anatolij Gustschin <agustschin@t-online.de> |
| Date: Wed Dec 5 17:43:20 2007 +0100 |
| |
| Fix ppc4xx clear_bss() code |
| |
| ppc4xx clear_bss() fails if BSS segment size is not |
| divisible by 4 without remainder. This patch provides |
| fix for this problem. |
| |
| Signed-off-by: Anatolij Gustschin <agust@denx.de> |
| |
| commit 85dc2a7f82d11e17f0ca2a448118aed7f7a4b85d |
| Author: Niklaus Giger <niklausgiger@gmx.ch> |
| Date: Fri Nov 30 18:35:11 2007 +0100 |
| |
| PPC4xx: Minimal changes to add vxWorks support |
| |
| Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> |
| |
| commit 052440b022ca8981d39b6f8c10d1aa6326f47480 |
| Author: Markus Klotzbücher <mk@denx.de> |
| Date: Fri Nov 23 13:09:18 2007 +0100 |
| |
| ppc4xx: Add CONFIG_BOOTP_SUBNETMASK to Sequoia board config |
| |
| When using dhcp/bootp the "netmask" environment variable is not |
| set because CONFIG_BOOTP_SUBNETMASK is not defined. But usually this is |
| desireable, so the following patch adds this this option to the board |
| config. |
| |
| Signed-off-by: Markus Klotzbuecher <mk@denx.de> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit a724a9b40c7fbeb6ade193ca52321b441eaecb4e |
| Author: Larry Johnson <lrj@arlinx.com> |
| Date: Sat Oct 27 12:48:15 2007 -0400 |
| |
| Fix/enhance ECC POST for 440EPx/GRx |
| |
| This patch allows the ECC POST to be used for different boards with the |
| PPC440 Denali SDRAM controller. Modifications include skipping the test |
| if ECC is not enabled (as for non-ECC DIMMs) and adding synchronization |
| to prevent timing errors. |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit 454a6cf8d498f70d2b3e18f07837603eb24b12d4 |
| Author: Larry Johnson <lrj@arlinx.com> |
| Date: Sat Oct 27 12:48:05 2007 -0400 |
| |
| PPC4xx: Move/rename ECC POST for 440EPx/GRx |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit c29d2d3680046d430022c55e50fcb27f5866517e |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Fri Dec 14 11:20:33 2007 +0100 |
| |
| ppc4xx: use correct io accessors for 4xx ethernet POST |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit ba79fde58a48c0a6ff8e2a96caba951594142203 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Fri Dec 14 11:19:56 2007 +0100 |
| |
| ppc4xx: fix flush + invalidate_dcache_range arguments |
| |
| flush + invalidate_dcache_range() expect the start and stop+1 address. |
| So the stop address is the first address behind (!) the range. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit 871e6ce188a7c6bc7321bcf8372857035d20f1cd |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Dec 14 08:41:29 2007 +0100 |
| |
| ppc4xx: fdt: use fdt_fixup_ethernet() |
| |
| By using aliases in the dts file, the ethernet node fixup is |
| much easier with the recently added functions. |
| |
| Please note that the dts file needs the aliases for this to work. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 136288847e3b04f2ff357a067ad45e10afa0a24c |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Dec 13 14:52:53 2007 +0100 |
| |
| ppc4xx: Bring 4xx fdt support up-to-date |
| |
| This patch update the 4xx fdt support. It enabled fdt booting |
| on the AMCC Kilauea and Sequoia for now. More can follow later |
| quite easily. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 0dc80e2759fba859ccc4cdadc633577ca2971f3e |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Dec 27 07:50:54 2007 +0100 |
| |
| cfi_flash: Add missing check for erased dest to flash_write_cfibuffer() |
| |
| The check for an sufficiently erased destination was missing in the |
| buffered write function of the cfi flash driver (when |
| CFG_FLASH_USE_BUFFER_WRITE is defined). This patch adds this check to that |
| writing to such a region will fail with the currect error message. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 33ed73bc0e38d0f2b5c183d4629d8f207e5b9994 |
| Author: Martin Krause <martin.krause@tqs.de> |
| Date: Mon Nov 12 10:56:17 2007 +0100 |
| |
| Some configuration updates for the TQM5200 based TB5200 board: |
| |
| - enable command line history |
| - increase malloc space (because of bigger flash sectors) |
| |
| Signed-off-by: Martin Krause <martin.krause@tqs.de> |
| |
| commit e318d9e9021a0af7508171f84ed09d0e79f0284e |
| Author: Martin Krause <martin.krause@tqs.de> |
| Date: Thu Sep 27 11:10:08 2007 +0200 |
| |
| TQM8xx: use the CFI flash driver on all TQM8xx boards |
| |
| Signed-off-by: Martin Krause <martin.krause@tqs.de> |
| |
| commit 11d9eec479b470eab9242ab937fca70a876d9376 |
| Author: Martin Krause <martin.krause@tqs.de> |
| Date: Wed Sep 26 17:55:56 2007 +0200 |
| |
| TQM885D: adjust for doubled flash sector size + some minor fixes |
| |
| Signed-off-by: Martin Krause <martin.krause@tqs.de> |
| |
| commit 22d1a56cbfb0bff34f477b4db6a55d076d829b83 |
| Author: Jens Gehrlein <jens.gehrlein@tqs.de> |
| Date: Wed Sep 26 17:55:54 2007 +0200 |
| |
| TQM885D: Exchanged SDRAM timing by a more relaxed timing. |
| |
| CAS-Latency=2, Write Recovery Time tWR=2 |
| The max. supported bus frequency is 66 MHz. Therefore, changed |
| threshold to switch from 1:1 mode to 2:1 from 80 MHz to 66 MHz. |
| |
| Signed-off-by: Martin Krause <martin.krause@tqs.de> |
| |
| commit b988b8cd443989be65161888eea0127ad03f846f |
| Author: Martin Krause <martin.krause@tqs.de> |
| Date: Wed Sep 26 17:55:56 2007 +0200 |
| |
| TQM885D: use calculated cpuclk instead of measuring it |
| |
| On the TQM885D the measurement of cpuclk with the PIT reference |
| timer ist not necessary. Since all module variants use the same |
| external 10 MHz oscillator, the cpuclk only depends on the PLL |
| configuration - which is readable by software. |
| |
| Signed-off-by: Martin Krause <martin.krause@tqs.de> |
| |
| commit 492c7049869348d31168de8dad89651315e468e0 |
| Author: Jens Gehrlein <jens.gehrlein@tqs.de> |
| Date: Thu Sep 27 14:54:46 2007 +0200 |
| |
| TQM885D: fix SDRAM refresh |
| |
| At 133 MHz the current SDRAM refresh rate is too fast |
| (measured 4 * 1.17 us). |
| CFG_MAMR_PTA changes from 39 to 128. This result |
| in a refresh rate of 4 * 7.8 us at the default clock |
| 66 MHz. At 133 MHz the value will be then 4 * 3.8 us. |
| This is a compromise until a new method is found to |
| adjust the refresh rate. |
| |
| Signed-off-by: Martin Krause <martin.krause@tqs.de> |
| |
| commit dabad4b9bc46908e301f73ce76b38b23626a96e9 |
| Author: Jens Gehrlein <jens.gehrlein@tqs.de> |
| Date: Thu Sep 27 14:54:46 2007 +0200 |
| |
| TQM860M: Support for 10col SDRAMs, max. 128 MiB |
| |
| Signed-off-by: Martin Krause <martin.krause@tqs.de> |
| |
| commit 61fb15c516fef5631e305f1976d7b3a679725856 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Thu Dec 27 01:52:50 2007 +0100 |
| |
| Fix coding style issues; update CHANGELOG. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 467bcee11fe26ad422f2de971aa70866079870f2 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Fri Dec 14 15:36:18 2007 +0100 |
| |
| cfi_flash: Add manufacturer-specific fixups |
| |
| Run fixups based on the JEDEC manufacturer ID independent of the |
| command set ID. |
| |
| This changes current behaviour: Previously, geometry reversal for AMD |
| chips were done based on the command set ID, while they are now done |
| based on the JEDEC manufacturer and device ID. |
| |
| Also add fixup for top-boot Atmel chips. A fixup is needed for |
| AT49BV6416(T) too, but since u-boot currently only reads the low byte |
| of the device ID, there's no way to tell it apart from AT49BV642D, |
| which should not have this fixup. Since AT49BV642D support is |
| necessary to get ATNGW100 board support into mainline, I've commented |
| out the fixup for now. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 0ddf06ddf6b4bd057ad4c5f0dffea7870ba06a2a |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Fri Dec 14 15:36:17 2007 +0100 |
| |
| cfi_flash: Add cmdset-specific init functions |
| |
| Move things like reading JEDEC IDs and fixing up geometry reversal |
| into separate functions. The geometry reversal fixup is now performed |
| by altering the qry structure directly, which makes the sector init |
| code slightly cleaner. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit e23741f4a6d8047520ef0d4971762749b3587d32 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Fri Dec 14 15:36:16 2007 +0100 |
| |
| cfi_flash: Read whole QRY structure in one go |
| |
| Read out the whole CFI Standard Query structure after successful cfi |
| identification. This allows subsequent code to access this information |
| directly without having to go through flash_read_uchar() and friends. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit df9c25ea04b38a0e05d4f8c73c5cc144cdafa7db |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Mon Dec 17 11:02:44 2007 +0100 |
| |
| AVR32: Fix logic inversion in disable_interrupts() |
| |
| disable_interrupts() should return nonzero if interrupts were |
| _enabled_ before, not disabled. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit acac475212cbedb17b321a363a1c878e2b47b37f |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Fri Dec 14 16:51:22 2007 +0100 |
| |
| AVR32: Enable interrupts at bootup |
| |
| The timer code depends on the timer interrupt to keep track of the |
| upper 32 bits of the cycle counter. This obviously doesn't work when |
| interrupts are disabled the whole time. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 9570bcd87f4db255514f43b6701746c412f8fef0 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Thu Nov 15 10:03:45 2007 +0100 |
| |
| AVR32: Fix wrong pin setup for USART3 |
| |
| As reported by Gerhard Berghofer: |
| |
| in "gpio_enable_usart3" the correct pins for USART 3 are PB17 and PB18 |
| instead of PB18 and PB19. |
| |
| which is obviously correct. There's currently no code that uses |
| USART3, but custom boards may run into problems. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 09ea0de03dcc3ee7af045b0b572227bda2c1c918 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Thu Nov 1 12:44:20 2007 +0100 |
| |
| README: Remove ATSTK1000 daughterboard list |
| |
| As noted by Kim Phillips, these lists tend to become out of date. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit c81cbbad21cb0ae983e2e796211202234cdc8be2 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Tue Oct 30 14:56:36 2007 +0100 |
| |
| Add ATSTK100[234] to MAINTAINERS |
| |
| Add all the ATSTK1000 daughterboards to MAINTAINERS along with their |
| "mother". Also update the entry for ATSTK1000 to be not only about the |
| AP7000 CPU; it's intended to handle all CPUs in the AT32AP family. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 64ff2357b1727213803591813dbc779c924bf772 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Mon Oct 29 13:02:54 2007 +0100 |
| |
| AVR32: Add support for the ATSTK1004 board |
| |
| ATSTK1004 is a daughterboard for ATSTK1000 with the AT32AP7002 CPU, |
| which is a derivative of AT32AP7000. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 667568db157f374b85abd7e03596ddd1f0b25681 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Mon Oct 29 13:02:54 2007 +0100 |
| |
| AVR32: Add support for the ATSTK1003 board |
| |
| ATSTK1003 is a daughterboard for ATSTK1000 with the AT32AP7001 CPU, |
| which is a derivative of AT32AP7000. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 5fee84a794a51ec830548cda485a770efb018b92 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Mon Oct 29 13:23:33 2007 +0100 |
| |
| AVR32: Make some AT32AP700x peripherals optional |
| |
| Add a chip-features file providing definitions of the form |
| |
| AT32AP700x_CHIP_HAS_<peripheral> |
| |
| to indicate the availability of the given peripheral on the currently |
| selected chip. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 36f28f8a9605ee5dcfa330482cfc62171261af97 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Mon Oct 29 13:09:56 2007 +0100 |
| |
| AVR32: Rename at32ap7000 -> at32ap700x |
| |
| The SoC-specific code for all the AT32AP700x CPUs is practically |
| identical; the only difference is that some chips have less features |
| than others. By doing this rename, we can add support for the AP7000 |
| derivatives simply by making some features conditional. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 4d5fa99c73f354e7cf985efcf417ea55ca2f6a5e |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Fri Jun 29 18:22:34 2007 +0200 |
| |
| atmel_mci: Show SR when block read fails |
| |
| Show controller status as well as card status when an error occurs |
| during block read. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 8697e6a19b10f514511b6a9c86de88bd108c4f8d |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Dec 13 14:52:53 2007 +0100 |
| |
| ppc4xx: Bring 4xx fdt support up-to-date |
| |
| This patch update the 4xx fdt support. It enabled fdt booting |
| on the AMCC Kilauea and Sequoia for now. More can follow later |
| quite easily. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 12d30aa79779c2aa7a998bbae4c075f822a53004 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Thu Dec 13 12:56:34 2007 +0100 |
| |
| cfi_flash: Use map_physmem() and unmap_physmem() |
| |
| Use map_physmem() and unmap_physmem() to convert from physical to |
| virtual addresses. This gives the arch a chance to provide an uncached |
| mapping for flash accesses. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 4d7d6936eb29af7cca330937808312aa5f61454d |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Thu Dec 13 12:56:33 2007 +0100 |
| |
| Introduce map_physmem() and unmap_physmem() |
| |
| map_physmem() returns a virtual address which can be used to access a |
| given physical address without involving the cache. unmap_physmem() |
| should be called when the virtual address returned by map_physmem() is |
| no longer needed. |
| |
| This patch adds a stub implementation which simply returns the |
| physical address cast to a uchar * for all architectures except AVR32, |
| which converts the physical address to an uncached virtual mapping. |
| unmap_physmem() is a no-op on all architectures, but if any |
| architecture needs to do such mappings through the TLB, this is the |
| hook where those TLB entries can be invalidated. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit cdbaefb5f5f03e54455d0439dcf6dbd97ead1f9d |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Thu Dec 13 12:56:32 2007 +0100 |
| |
| cfi_flash: Introduce read and write accessors |
| |
| Introduce flash_read{8,16,32,64) and flash_write{8,16,32,64} and use |
| them to access the flash memory. This makes it clearer when the flash |
| is actually being accessed; merely dereferencing a volatile pointer |
| looks just like any other kind of access. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 812711ce6b3a386125dcf0d6a59588e461abbb87 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Thu Dec 13 12:56:31 2007 +0100 |
| |
| Implement __raw_{read,write}[bwl] on all architectures |
| |
| This adds implementations of __raw_read[bwl] and __raw_write[bwl] to |
| m68k, ppc, nios and nios2. The m68k and ppc implementations were taken |
| from Linux. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit be60a9021c82fc5aecd5b2b1fc96f70a9c81bbcd |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Sat Oct 6 18:55:36 2007 +0200 |
| |
| cfi_flash: Reorder functions and eliminate extra prototypes |
| |
| Reorder the functions in cfi_flash.c so that each function only uses |
| functions that have been defined before it. This allows the static |
| prototype declarations near the top to be eliminated and might allow |
| gcc to do a better job inlining functions. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 3055793bcbdf24b1f8117f606ffb766d32eb766f |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Thu Dec 13 12:56:29 2007 +0100 |
| |
| cfi_flash: Make some needlessly global functions static |
| |
| Make functions not declared in any header file static. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 7e5b9b471518c5652febc68ba62b432193d6abf4 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Thu Dec 13 12:56:28 2007 +0100 |
| |
| cfi_flash: Break long lines |
| |
| This patch tries to keep all lines in the cfi_flash driver below 80 |
| columns. There are a few lines left which don't fit this requirement |
| because I couldn't find any trivial way to break them (i.e. it would |
| take some restructuring, which I intend to do in a later patch.) |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 42026c9cb3a76849b41e6e24abfb7b56807a5c1a |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Tue Dec 11 13:59:57 2007 +0100 |
| |
| CFI: synchronize command offsets with Linux CFI driver |
| |
| Fixes non-working CFI Flash on the Inka4x0 board. |
| |
| Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit 8ff3de61fc5f9b3b21647bce081a3b7f710f0d4d |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Fri Dec 7 12:17:34 2007 -0600 |
| |
| Handle MPC85xx PCIe reset errata (PCI-Ex 38) |
| |
| On the MPC85xx boards that have PCIe enable the PCIe errata fix. |
| (MPC8544DS, MPC8548CDS, MPC8568MDS). |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 82ac8c97145a4c3bf8b3dbfad00fa96e920f9b9c |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Fri Dec 7 12:04:30 2007 -0600 |
| |
| Update Freescale MPC85xx ADS/CDS/MDS board config |
| |
| * Enabled CONFIG_CMD_ELF |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit d435793229ce29a42797c1edc39f5b34f987f91a |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Fri Dec 7 04:59:26 2007 -0600 |
| |
| Handle Asynchronous DDR clock on 85xx |
| |
| The MPC8572 introduces the concept of an asynchronous DDR clock with |
| regards to the platform clock. |
| |
| Introduce get_ddr_freq() to report the DDR freq regardless of sync/async |
| mode. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 22abb2d2eaf7b795a6923c6273ec9cb53fda9a10 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Nov 29 10:34:28 2007 -0600 |
| |
| Update Freescale MPC85xx ADS/CDS/MDS board config |
| |
| * Removed some misc environment setup |
| * Enabled CONFIG_CMDLINE_EDITING |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 415a613babb84d5e5d5b42e8e553868c71fc3a64 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Nov 29 10:47:44 2007 -0600 |
| |
| Move the MPC8541/MPC8555/MPC8548 CDS board under board/freescale. |
| |
| Minor path corrections needed to ensure buildability. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit c2d943ffbfd3359b3b45d177b437379d2cb86fbf |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Nov 29 10:16:18 2007 -0600 |
| |
| Move the MPC8540 ADS board under board/freescale. |
| |
| Minor path corrections needed to ensure buildability. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 870ceac5b3a3486c109396e005af81ae762b5710 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Nov 29 10:14:50 2007 -0600 |
| |
| Move the MPC8560 ADS board under board/freescale. |
| |
| Minor path corrections needed to ensure buildability. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit acbca876fb3fec25cd9c55b0efc81ff618ff5262 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Nov 29 10:13:47 2007 -0600 |
| |
| Move the MPC8568 MDS board under board/freescale. |
| |
| Minor path corrections needed to ensure buildability. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit a853d56c59b33415304531443633808736acfc6e |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Nov 29 02:18:59 2007 -0600 |
| |
| Use standard LAWAR_TRGT_IF_* defines for LAW setup on 85xx |
| |
| We already had defines for LAWAR_TRGT_IF_* that we should use |
| rather than creating new ones. Also, added some missing defines for |
| PCIE targets. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 04db400892da37b76a585e332a0c137954ad2015 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Nov 29 02:10:09 2007 -0600 |
| |
| Stop using immap_t on 85xx |
| |
| In the future the offsets to various blocks may not be in same location. |
| Move to using CFG_MPC85xx_*_ADDR as the base of the registers |
| instead of getting it via &immap. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 2714223f8e04ab3e4133ff65872eef366d90bfea |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Nov 29 01:23:09 2007 -0600 |
| |
| Remove CONFIG_OF_FLAT_TREE related code from mpc85xx since we now use libfdt |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit c480861bf000156e6a3e932c258db59ff2212dd3 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Nov 29 01:06:19 2007 -0600 |
| |
| Update MPC8568 MDS to use libfdt |
| |
| Updated the MPC8568 MDS config to use libfdt and assume use of aliases for |
| ethernet, pci, and serial for the various fixups that are done. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 1563f56e0c68f6920f956382d6d13bee3f01c0f7 |
| Author: Haiying Wang <Haiying.Wang@freescale.com> |
| Date: Wed Nov 14 15:52:06 2007 -0500 |
| |
| Add PCI Express support on MPC8568MDS |
| |
| Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit b90d25497625b90ffa3f2911a0895ca237556ff5 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Nov 29 00:11:44 2007 -0600 |
| |
| Update MPC85xx CDS to use libfdt |
| |
| Updated the MPC85xx CDS config to use libfdt and assume use of aliases for |
| ethernet, pci, and serial for the various fixups that are done. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 0fd5ec66b10521a057ad73e69ab5f0f9eafba255 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Nov 28 22:54:27 2007 -0600 |
| |
| Update MPC8540 ADS to use libfdt |
| |
| Updated the MPC8540 ADS config to use libfdt and assume use of aliases for |
| ethernet, pci, and serial for the various fixups that are done. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 5ce715802f6c50dc78b3405b92f184b1e3710519 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Nov 28 22:40:31 2007 -0600 |
| |
| Update MPC8560 ADS to use libfdt |
| |
| Updated the MPC8560 ADS config to use libfdt and assume use of aliases for |
| ethernet, pci, and serial for the various fixups that are done. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit aafeefbdb8b029f5ca2a195598d0a501a606eea9 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Nov 28 00:36:33 2007 -0600 |
| |
| Stop using immap_t for cpm offset on 85xx |
| |
| In the future the offsets to various blocks may not be in same location. |
| Move to using CFG_MPC85xx_CPM_ADDR as the base of the CPM registers |
| instead of getting it via &immap->im_cpm. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit f59b55a5b8fcadaa99781ba48e7a38e956afa527 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Tue Nov 27 23:25:02 2007 -0600 |
| |
| Stop using immap_t for guts offset on 85xx |
| |
| In the future the offsets to various blocks may not be in same location. |
| Move to using CFG_MPC85xx_GUTS_ADDR as the base of the guts registers |
| instead of getting it via &immap->im_gur. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 50c03c8cf494d91cdec39670d95337c743e16ec9 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Tue Nov 27 22:42:34 2007 -0600 |
| |
| Update MPC8544 DS config |
| |
| * Removed HAS_ETH2/HAS_ETH3 - MPC8544 only has TSEC1/2 |
| * Removed some misc environment setup |
| * Moved to using fdtfile & fdtaddr as fdt env var names |
| * Enabled CONFIG_CMDLINE_EDITING |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit addce57e2e4c49e77ffb2020a84690713bb18b47 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Mon Nov 26 17:12:24 2007 -0600 |
| |
| Update MPC8544DS to use libfdt |
| |
| Updated the MPC8544DS config to use libfdt and assume use of aliases for |
| ethernet, pci, and serial for the various fixups that are done. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit f852ce72f100cabd1f11c21c085a0ad8eca9fb65 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Nov 29 00:15:30 2007 -0600 |
| |
| Add libfdt based ft_cpu_setup for mpc85xx |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 3b9abdc448a1c2c6a4c2aa292724b4d1a05166a9 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Dec 11 13:38:19 2007 +0100 |
| |
| ppc4xx: Correct GPIO offset in gpio_config() |
| |
| Thanks to Gary Jennejohn for pointing this out. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 8809a2713b1ceaf3da55d9d785470294f15de06a |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Dec 11 11:46:01 2007 +0100 |
| |
| rtc: Fix merging problem |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 7cfc12a7dcfdb350e2ab76db4dafcc30f7e77c2b |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Dec 8 14:47:34 2007 +0100 |
| |
| ppc4xx: 405EX: Correctly enable USB pins |
| |
| This patch selects the USB data pins in the 405EX GPIO and MFC (multi |
| function control) registers. This is done for the AMCC Kilauea and |
| Makalu eval boards. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 9692c2734a47f23b44a0f68042a3e2ca8d1bfb39 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Dec 8 08:25:09 2007 +0100 |
| |
| CFI: Coding style cleanup |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 81b20ccc2d795ae9a1199db5a50ad9c28d1e4d22 |
| Author: Michael Schwingen <michael@schwingen.org> |
| Date: Fri Dec 7 23:35:02 2007 +0100 |
| |
| CFI: support JEDEC flash roms in CFI-flash framework |
| |
| The following patch adds support for non-CFI flash ROMS, by hooking into the |
| CFI flash code and using most of its code, as recently discussed here in the |
| thread "Mixing CFI and non-CFI flashs". |
| |
| Signed-off-by: Michael Schwingen <michael@schwingen.org> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit c01b17dd856fa120b2970f50d9598546a4927ec3 |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Wed Nov 28 21:24:50 2007 -0500 |
| |
| Conditionally compile fdt_fixup_ethernet() |
| |
| Fix compiler warnings: On boards that don't have ethernets defined, |
| don't compile fdt_fixup_ethernet(). |
| |
| commit 246d4ae6bc282bc1841224e1c5fc49dc925e0bf7 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Tue Nov 27 21:59:46 2007 -0600 |
| |
| Convert boards that set memory node to use fdt_fixup_memory() |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 151c8b09b35eebe8fd9139cb6c1d91c27b22f058 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Mon Nov 26 17:06:15 2007 -0600 |
| |
| Added fdt_fixup_stdout that uses aliases to set linux,stdout-path |
| |
| We use a combination of the serialN alias and CONFIG_CONS_INDEX to |
| determine which serial alias we should set linux,stdout-path to. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 3c9272813fad84c691d0e4989bb18a3ffebdebfc |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Mon Nov 26 14:57:45 2007 -0600 |
| |
| Add common memory fixup function |
| |
| Add the function fdt_fixup_memory() to fixup the /memory node of the fdt |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 9c9109e7fcf7ac2ca19c95b8ac54b8d1c773b157 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Mon Nov 26 11:19:12 2007 -0600 |
| |
| Conditionally compile fdt_support.c |
| |
| Modify common/Makefile to conditionally compile fdt_support.c based |
| on CONFIG_OF_LIBFDT. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit d88e7ba0980773479e1a64badb293116071b7ef0 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Mon Nov 26 10:41:40 2007 -0600 |
| |
| Fix build breakage due to libfdt import |
| |
| The IDS8247 got lost in the update and need an API update |
| do to rename of functions in libfdt. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 28f384b171bbf1fb2dafb1046e6d259a6b2f8714 |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Fri Nov 23 19:43:20 2007 -0500 |
| |
| Add spaces around the = in the fdt print format. |
| |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit 29592ecba3b932b9b152bcec6c0c0806412db4a3 |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Fri Dec 7 01:25:38 2007 +0900 |
| |
| sh: Moved driver of the SuperH dependence |
| |
| The composition of the directory in the drivers/ changed. |
| I moved SuperH serial driver and marubun PCMCIA driver. |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 41be969f4957115ed7b1fe8b890bfaee99d7a7a2 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Thu Dec 6 10:21:19 2007 +0100 |
| |
| Release v1.3.1 |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit cf5933ba1e97a1cd8f5f24070e820f21d976eaeb |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Thu Dec 6 10:21:03 2007 +0100 |
| |
| ADS5121 Board: fix compile problem. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit a27044b14a9e93678a82d7b35f202b93e7687abc |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Dec 6 05:58:43 2007 +0100 |
| |
| ppc4xx: Enable hardware-fix for PCI/DMA errata on AMCC 440SP/SPe boards |
| |
| This patch enables the hardware-fix for the PCI/DMA errata's 19+22 by |
| setting the FIXD bit in the SDR0_MFR register. Here a description of the |
| symptoms: |
| |
| Problem Description |
| ------------------------------ |
| If a DMA is performed between memory and PCI with the DMA 1 Controller |
| using prefetch, and as a result uses a special purpose buffer selected by |
| the PCIXn Bridge Options 1 Register (PCIXn_BRDGOPT1[RBP7] - bits 31-29), |
| the first part of the transfer sequence is performed twice. The |
| PPC440SPe PCI Controller requests more data than was needed such that in |
| the case of enforce memory protection, a host CPU exception can occur. |
| No data is corrupted, because data transfer is stopped in the PCI |
| Controller. Prefetch enable is specified by setting DMA Configuration |
| Register (I2O0_DMAx_CFG[DXEPD] - bit 31) to 0. |
| |
| Behavior that may be observed in a running system |
| --------------------------------------------------------------------------- |
| |
| 1. DMA performance is decreased because of the double access on the PCI bus |
| interface. |
| 2. If an illegal access to some address on the PCI bus is detected at the |
| system level, a machine check or similar system error may occur. |
| |
| Workarounds Available |
| ---------------------------------- |
| |
| 1. Do not program prefetch. Note that a prefetch command cannot be programmed |
| without selecting a special purpose buffer. |
| 2. To avoid crossing a physical boundary of the PCI slave device, add 512 |
| bytes of address to the PCI address range. |
| |
| This patch was originally provided by Pravin M. Bathija <pbathija@amcc.com> |
| from AMCC and slighly changed. |
| |
| Signed-off-by: Pravin M. Bathija <pbathija@amcc.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit a90921f71d225bf9e0f0fc7b8beadeb8001bf78a |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Dec 4 16:29:48 2007 +0100 |
| |
| ppc4xx: Yosemite/Yellowstone: Add DTT AD7414 support |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 8d4f040a3c15036a6ea25a9c39e7d89fefa8440d |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Mon Dec 3 00:15:28 2007 +0100 |
| |
| Prepare for 1.3.1-rc1 |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit e15e33433e7c05111968dc9b434a52fd42cbd221 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Nov 30 07:15:41 2007 +0100 |
| |
| ppc4xx: Kilauea: Add PCIe reset assertion upon power-up |
| |
| This manual PCIe reset triggering solves the problem seen with the |
| Intel EPRO/1000 card, which was not detected (link not established) |
| upon power-up reset. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 260eea5676ca46903a335686cc020b29c4ca46fe |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Thu Nov 29 01:21:54 2007 +0900 |
| |
| sh: Add SuperH boards maintainer to MAINTAINERS file |
| |
| Add MS7750SE and MS7722SE's board maintainer to MAINTAINERS file. |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit aa9c4f1d22701a92347c1c81f34d12c8ad3a3747 |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Thu Nov 29 00:13:04 2007 +0900 |
| |
| sh: Add ms7750se support in MAKEALL |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit c7144373427a178332bf9754131c8c34c52c200a |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Tue Nov 27 09:44:53 2007 +0100 |
| |
| sh: Add sh3 and sh4 support in MAKEALL |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 130080874a3d28450098481a262c5f7c855e908d |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Sun Nov 25 02:51:17 2007 +0900 |
| |
| sh: Add document for SuperH. |
| |
| This document is a summary of information concerning SuperH of U-Boot. |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 33ecdc2f9d64926e1a6067b28f3a0aefc3b6d23d |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Sun Nov 25 02:39:31 2007 +0900 |
| |
| sh: Add marubun's pcmcia driver |
| |
| Marubun pcmcia is a chip for PCMCIA used with SuperH. |
| Of course, this can be used even by other architectures. |
| When use this driver, came to be able to use CompactFlash |
| and Ethernet. |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit febd86b969b975289ed948f1ac0eb9722da41ced |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Sun Nov 25 02:32:13 2007 +0900 |
| |
| sh: Update SuperH SCIF driver |
| |
| - Changed volatile unsigned to vu_. |
| - Changed Makefile for kconfig. |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 8be760903645af09871be50ad0a6f9ebb62b311d |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Nov 27 11:57:35 2007 +0100 |
| |
| ppc4xx: Kilauea & Makalu: Fix ext IRQ pin multiplexing |
| |
| After an error in the AMCC 405EX users manual now correctly configure |
| IRQ2 (Kilauea)/IRQ0 (Makalu) as alternate 2 signal for external IRQ |
| usage. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit a5f601fd1b1278deae5aa9fc27a232b0d1c1c788 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Mon Nov 26 19:18:21 2007 +0100 |
| |
| Cleanup coding style; update CHANGELOG |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 3deca9d44767efd1b83f4b701f0dbf21a7595f7b |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sun Nov 25 22:39:25 2007 +0100 |
| |
| MAKEALL: add missing 512x boards in ppc |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit a340c325e668ca7386c2276387681720be9c3757 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sun Nov 25 18:45:47 2007 +0100 |
| |
| Makefile : fix tags ctags etags with new drivers organization |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 63362cfc6baa97ae0e37ba2c6ece530fcac9f79e |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Nov 26 15:06:14 2007 +0100 |
| |
| ppc4xx: Makalu: Change EBC setup for CS0 to enable 400MHz usage |
| |
| As suggested by Senao, use a different EBC_PB0AP setup for 400MHz |
| operation. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit ca1ce226287270bb01e25b8e3674c701f12edf19 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Nov 26 15:01:45 2007 +0100 |
| |
| ppc4xx: Kilauea: Configure pin mux to use ext IRQ2 as interrupt |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 87ddedd6ad804427ce125ceaa076d7a4f74e9d5d |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sun Nov 25 18:45:47 2007 +0100 |
| |
| Makefile : fix tags ctags etags with new drivers organization |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 59829cc189378c142c13d2aa8d9a897d8bef3961 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sat Nov 24 21:26:56 2007 +0100 |
| |
| drivers/mtd : move mtd drivers to drivers/mtd |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 318c0b90431f2648552e5ade78833f42652ce859 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sat Nov 24 21:17:55 2007 +0100 |
| |
| drivers/misc : move misc drivers to drivers/misc |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 33daf5b7858807cb4ce4158c2c56524671c14c08 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sat Nov 24 21:13:59 2007 +0100 |
| |
| drivers/block : move block drivers to drivers/block |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 0c698dcaa70275eb8814f665b545547cee013892 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sat Nov 24 20:59:50 2007 +0100 |
| |
| drivers/rtc : move rtc drivers to drivers/rtc |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit f868cc5a50757d94f36c312395481cb0f187d9e6 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sat Nov 24 20:14:44 2007 +0100 |
| |
| drivers/hwmon : move hardware monitor drviers to drivers/hwmon |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 16b195c82a18cbfd164800f17a1ef9db2e48331a |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sat Nov 24 19:46:45 2007 +0100 |
| |
| drivers/input : move input drivers to drivers/input |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit e4558666293364fc3af1c1d9381ca933fa0f1275 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sat Nov 24 19:40:11 2007 +0100 |
| |
| drivers/usb : move usb drivers to drivers/usb |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 1378df792a7ff3abd1bf54a63f5475784f5b083c |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sat Nov 24 19:33:38 2007 +0100 |
| |
| drivers/serial : move serial drivers to drivers/serial |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 2439e4bfa111babf4bc07ba20efbf3e36036813e |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Wed Nov 21 21:19:24 2007 +0100 |
| |
| drivers/net : move net drivers to drivers/net |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 352d259130b349fe9593b8dada641bd78a9659e5 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Tue Nov 20 20:41:48 2007 +0100 |
| |
| drivers/video : move video drivers to drivers/video |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 73646217186aa17afc8e305c5f06f06dd335eaad |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Tue Nov 20 20:33:09 2007 +0100 |
| |
| drivers/pcmcia : move pcmcia drivers to drivers/pcmcia |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 93a686ee9c5ddc6fa368c32cfbfde6f6724599fc |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Tue Nov 20 20:28:09 2007 +0100 |
| |
| drivers/pci : move pci drivers to drivers/pci |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 9162352817579840d7802da6d85872b3ca003c97 |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Thu Nov 22 17:23:23 2007 -0500 |
| |
| Fix fdt printing for updated libfdt |
| |
| Also improve printing (adopt dtc v1 "c style" hex format), whitespace cleanup. |
| |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit 9eb77cea1fa12d5969eb26a1d1d81da381bd6b1c |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Nov 21 13:30:15 2007 -0600 |
| |
| Add additional fdt fixup helper functions |
| |
| Added the following fdt fixup helpers: |
| * do_fixup_by_prop{_u32} - Find matching nodes by property name/value |
| * do_fixup_by_compat{_u32} - Find matching nodes by compat |
| |
| The _u32 variants work the same only the property they are setting |
| is know to be a 32-bit integer instead of a byte buffer. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit ab544633abdd14f4dd5d92e500b73eb59ef57e67 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Nov 21 11:11:03 2007 -0600 |
| |
| Add fdt_fixup_ethernet helper to set mac addresses |
| |
| Added a fixup helper that uses aliases to set mac addresses |
| in the device tree based on the bd_t |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit dbaf07ce620aab249e3502b20a986234a6af1d3a |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Nov 21 14:07:46 2007 -0600 |
| |
| Fix warnings from import of libfdt |
| |
| cmd_fdt.c: In function fdt_print: |
| cmd_fdt.c:586: warning: assignment discards qualifiers from pointer target type |
| cmd_fdt.c:613: warning: assignment discards qualifiers from pointer target type |
| cmd_fdt.c:635: warning: assignment discards qualifiers from pointer target type |
| cmd_fdt.c:636: warning: assignment discards qualifiers from pointer target type |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 8d04f02f6224e6983f4812ea4da704950ec8539c |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Oct 24 11:04:22 2007 -0500 |
| |
| Update libfdt from device tree compiler (dtc) |
| |
| Update libfdt to commit 8eaf5e358366017aa2e846c5038d1aa19958314e from |
| the device tree compiler (dtc) project. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit e93becf80d732b64aef81b23e8b6ece02c40533d |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Sat Nov 3 19:46:28 2007 -0500 |
| |
| Move do_fixup* for libfdt into common code |
| |
| Moved the generic fixup handling code out of cpu/mpc5xxx and cpu/mpc8260 |
| into common/fdt_support.c and renamed: |
| |
| do_fixup() -> do_fixup_by_path() |
| do_fixup_u32() -> do_fixup_by_path_u32() |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit f738b4a75998f42a7408defadc9baac7a31c92db |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Oct 25 16:15:07 2007 -0500 |
| |
| Make no options to fdt print default to '/' |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit a3c2933e02503fe36ade2c1b65af46f2b7a168e7 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Oct 24 10:21:57 2007 -0500 |
| |
| Removed some nonused fdt functions and moved fdt_find_and_setprop out of libfdt |
| |
| Removed: |
| fdt_node_is_compatible |
| fdt_find_node_by_type |
| fdt_find_compatible_node |
| |
| To ease merge of newer libfdt as we aren't using them anywhere at this time. |
| |
| Also moved fdt_find_and_setprop out of libfdt into fdt_support.c for the same |
| reason. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 98e2867cc85409b919f862e6c16026461ec955df |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Wed Nov 21 09:19:37 2007 -0700 |
| |
| [BUILD] Remove libraries when updating autoconf.mk |
| |
| Fix library problems caused by conditional compilation. Using |
| autoconf.mk to decide which files to compile has caused a problem when |
| changing configuration from one board to another without clearing out |
| the library (*.a) files. |
| |
| It used to be that the linker was always passed the same list of .o |
| files when building the .a files. However, that is not longer true |
| with conditional compilation. Now, a different board config will have |
| a different file list passed to the linker. The problem occurs when |
| a library has already been built and the board config is changed. |
| |
| Since the linker will update instead of replace a preexisting library, |
| then if the file list changes to remove some object files the old |
| objects will still exist in the library. |
| |
| The solution is to remove all old library files when autoconf.mk is |
| made. |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit ed1353d74b9ce8a7fcd660570b848a184d614b5f |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Nov 21 08:49:50 2007 -0600 |
| |
| [BUILD] conditionally compile libfdt/*.c in libfdt/Makefile |
| |
| Modify libfdt/Makefile to conditionally compile the *.c files based |
| on the board config. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 4a43719a7738712811d822ca8125427b27a55cdc |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Mon Sep 24 09:05:31 2007 -0600 |
| |
| [BUILD] conditionally compile common/cmd_*.c in common/Makefile |
| |
| Modify common/Makefile to conditionally compile the cmd_*.c files based |
| on the board config. |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 2f155f6c0a1f5e9a306a3f1f4fbe067db7ced3b1 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Mon Sep 24 09:05:31 2007 -0600 |
| |
| [BUILD] Generate include/autoconf.mk from board config files |
| |
| Use cpp and sed to postprocess config.h and import the defined values |
| into include/autoconf.mk. autoconf.mk is then included by config.mk to |
| give 'make' access to the board configuration. |
| |
| Doing this enables conditional compilation at the Makefile level instead |
| of by wrapping every .c file with #ifdef/#endif wrappers. |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 68b88999da87ab88e71e1306192905be3450198e |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Nov 20 15:02:26 2007 -0600 |
| |
| 8610HPCD: Enable the 8610 Display Interface Unit |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 74f89faa9d1e77ed947e628d3effaa513fe05d05 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Nov 20 15:00:53 2007 -0600 |
| |
| Move 8610 DIU interface structure definitions to header file. |
| |
| These two structures are still needed during the |
| initialization and setup of the DIU hardware. |
| So move them to the fsl_diu_fb.h file for now. |
| Official "blah". |
| |
| Noticed-by: York Sun <yorksun@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 080c646dbf474a109c3f85718fb01ce042a38c45 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Tue Nov 20 20:14:18 2007 +0100 |
| |
| drivers/i2c : move i2c drivers to drivers/i2c |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 9a337ddc154a10a26f117fd147b009abcdeba75a |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Mon Nov 19 22:20:24 2007 +0100 |
| |
| Prepare for 1.3.0 release. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit f30ad49b16bf998b03c1a5228b6c86369d61c258 |
| Author: Haiying Wang <Haiying.Wang@freescale.com> |
| Date: Mon Nov 19 10:02:13 2007 -0500 |
| |
| Move CONFIG_QE out of CONFIG_PCI wrap for MPC8568MDS |
| |
| CONFIG_QE shouldn't be in the wrap of CONFIG_PCI, fix it. |
| |
| Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> |
| |
| commit f8c320609366176b31104d9bf5e295232e1c7f1d |
| Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| Date: Mon Nov 19 11:14:16 2007 +0900 |
| |
| [MIPS] board/gth2/lowlevel_init.S: Fix a build warning |
| |
| lowlevel_init.S: Assembler messages: |
| lowlevel_init.S:413: Warning: Pretending global symbol used as branch target is local. |
| |
| Looking at codes, the `memtest' and `clearmem' are intentional mixed |
| use of `global symbols' and `label' for debugging purpose. To make it |
| build, just disable global-symbols-use for now. As a result `memtest' |
| still remains as unused, but leave it be... |
| |
| Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| |
| commit e8da58f2bc092891e8cc92b927ed5c4bd0cb0cab |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Mon Nov 19 12:59:14 2007 +0100 |
| |
| Fix build problems with mp2usb board |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 6bf4c686afca1e86e1c384d59218f914605713bf |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sun Nov 18 18:36:11 2007 +0100 |
| |
| s3c24x0: Fix usb_ohci.c missing in Makefile |
| and usb_ohci.c warning differ in signedness |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 6073f61e078da5ddb521b56256bcc36508589883 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sun Nov 18 12:55:02 2007 +0100 |
| |
| pb1x00 board: Fix u16 status declaration when PCMCIA is defined |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 8412d814ce8bf5570a2b747f1e7fd321097fe987 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Nov 18 17:11:09 2007 +0100 |
| |
| Fix compiler warnings for ARM systems. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 409ecdc0bb47dd28b0af6c25ffd658d22cc36b37 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Nov 18 16:36:27 2007 +0100 |
| |
| Fix compiler warnings for PPC systems. Update CHANGELOG. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 653811a3c2b35856bf12e196dcc8c4694e28e420 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sun Nov 18 14:44:44 2007 +0100 |
| |
| ppc4xx: Correct 405EX PCIe UTL register mapping |
| |
| Map 4k mem space for UTL registers for each port. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 079c2c4fa71c0d1ebef394508df9088df8a308d3 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sat Nov 17 11:31:10 2007 +0100 |
| |
| Fix warning differ in signedness in net/net.c and net/nfs.c |
| |
| commit 7e14fc65368cbd2861b1207453da55a4fc7b3f81 |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Sat Nov 17 20:42:45 2007 +0900 |
| |
| gth2.c: Fix a warning on gth2 build. |
| |
| gth2.c: In function 'misc_init_r': |
| gth2.c:434: warning: pointer targets in passing argument 2 of 'setenv' differ in signedness |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit 2309c130aa4c84b91bd874a41269c923eb61b555 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Nov 17 07:58:25 2007 +0100 |
| |
| Fix warning differ in signedness in common/cmd_scsi.c |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 9ea61b57968554eaf0f474ec7e088b17d367f474 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Nov 17 14:52:29 2007 +0100 |
| |
| ppc4xx: Update AMCC Kilauea config file |
| |
| - Use generic GPIO configuration framework (CFG_4xx_GPIO_TABLE) |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 7e1d884b7cb602007329c517ec1c453e3a6a5d9c |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Sat Nov 17 20:05:26 2007 +0900 |
| |
| [MIPS] cpu/mips/config.mk: Fix GNU assembler minor version picker |
| |
| Current trick to pick up GNU assembler minor version does not work with the |
| latest binutils (2007-03-01 or later) due to ${PKGVERSION} now default to |
| "(GNU Binutils) ". |
| |
| $ sde-as --version |grep "GNU assembler" |
| GNU assembler 2.15.94 mipssde-6.02.02-20050602 |
| $ sde-as --version |grep "GNU assembler" |awk '{print $3}' |
| 2.15.94 |
| $ sde-as --version |grep "GNU assembler" |awk '{print $3}' |awk -F. '{print $2}' |
| 15 |
| $ |
| |
| $ mips-linux-as --version |grep "GNU assembler" |
| GNU assembler (GNU Binutils) 2.18 |
| $ mips-linux-as --version |grep "GNU assembler" |awk '{print $3}' |
| (GNU |
| $ mips-linux-as --version |grep "GNU assembler" |awk '{print $3}' |awk -F. '{print $2}' |
| (no output) |
| $ |
| |
| As a result of above, you'll see many noises with such binutils: |
| |
| make -C cpu/mips/ |
| /bin/sh: line 0: [: : integer expression expected |
| /bin/sh: line 0: [: : integer expression expected |
| make[1]: Entering directory `/home/skuribay/devel/u-boot.git/cpu/mips' |
| mips-linux-gcc -D__ASSEMBLY__ -g -Os -D__KERNEL__ -DTEXT_BASE=0xB0000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isystem /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4kc -EB -c -o incaip_wdt.o incaip_wdt.S |
| /bin/sh: line 0: [: : integer expression expected |
| mips-linux-gcc -D__ASSEMBLY__ -g -Os -D__KERNEL__ -DTEXT_BASE=0xB0000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isystem /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4kc -EB -c -o cache.o cache.S |
| /bin/sh: line 0: [: : integer expression expected |
| mips-linux-gcc -g -Os -D__KERNEL__ -DTEXT_BASE=0xB0000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isystem /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4kc -EB -Wall -Wstrict-prototypes -c -o asc_serial.o asc_serial.c |
| /bin/sh: line 0: [: : integer expression expected |
| |
| This patch simplifies the trick and makes it work with both versions of gas. |
| I also replace an expensive `awk (or gawk)' with `cut'. |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit 16664f72850846e645616da1c0fa5afcd6d15f15 |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Sat Nov 17 20:05:26 2007 +0900 |
| |
| [MIPS] Remove useless instructions for initializing $gp. |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit 03c031d5660ea946c39af6e2e16267da857c609f |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Sat Oct 27 15:27:06 2007 +0900 |
| |
| [MIPS] MIPS 4K core: Coding style cleanups |
| |
| No logical changes. |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit f5e429d3860bba4c6ae8bead8f78349fa24491b2 |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Sat Nov 17 20:05:20 2007 +0900 |
| |
| [MIPS] gth2.c: Fix a warning on gth2 build. |
| |
| gth2.c: In function 'misc_init_r': |
| gth2.c:434: warning: pointer targets in passing argument 2 of 'setenv' differ in signedness |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit 4fbd0741b2b6441da10be93e10267122581b7079 |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Sat Oct 27 15:22:33 2007 +0900 |
| |
| [MIPS] au1x00_eth.c: Fixed a warning on pb1000 build. |
| |
| au1x00_eth.c: In function 'au1x00_miiphy_write': |
| au1x00_eth.c:139: warning: 'return' with no value, in function returning non-void |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit f01320459736f156707425cf8112f98606301aa4 |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Sat Oct 27 15:00:25 2007 +0900 |
| |
| [MIPS] au1x00_eth.c: Fix au1x00_miiphy_{read,write} build error |
| |
| au1x00_eth.c: In function 'au1x00_enet_initialize': |
| au1x00_eth.c:246: error: 'au1x00_miiphy_read' undeclared (first use in this function) |
| au1x00_eth.c:246: error: (Each undeclared identifier is reported only once |
| au1x00_eth.c:246: error: for each function it appears in.) |
| au1x00_eth.c:246: error: 'au1x00_miiphy_write' undeclared (first use in this function) |
| au1x00_eth.c: In function 'au1x00_miiphy_write': |
| au1x00_eth.c:298: warning: 'return' with no value, in function returning non-void |
| make[1]: *** [au1x00_eth.o] Error 1 |
| |
| Fixed by moving these two functions forward. |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit b09258c5393edd1087c5f39ae68338f16b49f8b3 |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Sat Oct 27 15:00:25 2007 +0900 |
| |
| MAKEALL: Added missing pb1000 board |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit 2e4a6e3667a1e39c0e6e99498686b15d2718b369 |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Sat Oct 27 15:00:24 2007 +0900 |
| |
| [MIPS] pb1000: Replace obsolete memsetup.S with lowlevel_init.S |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit 662e5cb397249c3ea88a4c3255e9ccfc40b98d82 |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Sat Oct 27 15:00:24 2007 +0900 |
| |
| [MIPS] u-boot.lds: Cleanup __u_boot_cmd_{start,end} |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit 5947f6999aafa7c54c1390983d264a8463dfea8e |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sat Nov 17 02:34:38 2007 +0100 |
| |
| Update CHANGELOIG, prepare for -rc4 |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit fd329e6f05bbdfe6bd71b0e09f0c76d3b0a025a5 |
| Author: Luotao Fu <l.fu@pengutronix.de> |
| Date: Wed Nov 14 18:58:33 2007 +0100 |
| |
| Fix the i2c frequency and default address in rsdproto board |
| |
| rsdproto board support has wrong I2C frequency and wrong return value |
| handling. |
| |
| Signed-off-by: Luotao Fu <l.fu@pengutronix.de> |
| |
| commit 429c180edad038f91c989cb14b478228092e7054 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sat Nov 17 01:45:38 2007 +0100 |
| |
| powerpc: Backout relocation changes for MPC5121, too. |
| |
| Apply Grant Likely's backout to MPC5121 code, too. |
| |
| Pointed out by Rafal Jaworowski <raj@semihalf.com> |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 1c3dd43338a077165e7e0309cb3994e65d2bdbf8 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Nov 13 22:18:33 2007 -0700 |
| |
| powerpc: Backout relocation changes. |
| |
| Ugh. I *hate* to back this change out, but these compiler flags don't |
| work for relocation on all versions of GCC. I've not been able to |
| reproduce the environment in my setup (and hence, not been able to |
| find a combination that *does* work), so I've got no choice but to go |
| back to the old gcc flags and linker script. |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 5c15010efad980ad5498cc565fc1ed70df2f52b4 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Tue Nov 13 09:11:05 2007 +0100 |
| |
| Fixed mips_io_port_base build errors. |
| |
| This patch has been sent on: |
| - 29 Sep 2007 |
| |
| Although mips_io_port_base is currently a part of IDE command, it is quite |
| fundamental for MIPS I/O port access such as in[bwl] and out[bwl]. So move |
| it to MIPS general part, and introduce `set_io_port_base()' from Linux. |
| |
| This patch is triggered by multiple definition of `mips_io_port_base' build |
| error on gth2 (and tb0229 also needs this fix.) |
| |
| board/gth2/libgth2.a(gth2.o): In function `log_serial_char': |
| /home/skuribay/devel/u-boot.git/board/gth2/gth2.c:47: multiple definition of `mips_io_port_base' |
| common/libcommon.a(cmd_ide.o):/home/skuribay/devel/u-boot.git/common/cmd_ide.c:712: first defined here |
| make: *** [u-boot] Error 1 |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 6ecbb7a3fa9b0940ed33e490d195d4b6830b2422 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sat Nov 17 01:30:40 2007 +0100 |
| |
| Fix a bug in the slave serial programming mode for the Xilinx |
| Spartan2/3 FPGAs. The old code used "< 0" on a "char" type to test if |
| the most significant bit was set, which did not work on any |
| architecture where "char" defaulted to be an unsigned type. |
| |
| Based on a patch by Angelos Manousaridis <amanous@inaccessnetworks.com> |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit d08b7233bc252faad8339e7ca0ddfd62fa79903c |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Thu Nov 1 12:23:29 2007 -0500 |
| |
| 86xx: Fix broken variable reference when #def DEBUGing. |
| |
| Sometimes you can't reference the DDR2 controller variables. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit f9d9164d9c6b5a7f0393fd8d7e246b8a0326bc19 |
| Author: Jason Jin <Jason.jin@freescale.com> |
| Date: Fri Oct 26 18:32:00 2007 +0800 |
| |
| make 8610 board use pixis reset |
| |
| Signed-off-by: Jason Jin <Jason.jin@freescale.com> |
| |
| commit db74b3c1c9481a6bffbf8cd445e5bcbf6908e836 |
| Author: Jason Jin <Jason.jin@freescale.com> |
| Date: Mon Oct 29 19:26:21 2007 +0800 |
| |
| Unify pixis_reset altbank across board families |
| |
| Basically, refactor the CFG_PIXIS_VBOOT_MASK values |
| into the separate board config files. |
| |
| Signed-off-by: Jason Jin <Jason.jin@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 64bf555465c7926be13e1046ac0d0f05ac72829c |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Wed Nov 7 08:19:21 2007 +0100 |
| |
| Fix warning: pointer targets in assignment differ in signedness |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 7a60ee7c6248a958c5757d3660a1702723a2786d |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Wed Nov 7 08:19:19 2007 +0100 |
| |
| Fix warning differ in signedness in common/cmd_ide.c |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit f31d38b9eea9b32f6a1ac848a298cc71ca4c9a03 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Nov 16 14:16:54 2007 +0100 |
| |
| ppc4xx: Enable 405EX PCIe UTL register configuration |
| |
| Till now the UTL registers on 405EX were not initialized but left with |
| their default values. This patch new initializes some of the UTL |
| registers on 405EX. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit ecdcbd4f8c1f8cefd785752f4e7536aae2a4ecf9 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Nov 16 14:00:59 2007 +0100 |
| |
| ppc4xx: Update AMCC Makalu for board rev 1.1 |
| |
| This patch adds changes needed for Makalu rev 1.1: |
| |
| - Enable 2nd DDR2 bank resulting in 256MByte of SDRAM |
| - Enable 2nd ethernet port EMAC1 |
| - Use generic GPIO configuration framework (CFG_4xx_GPIO_TABLE) |
| - Reset PCIe ports via GPIO upon bootup |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 4d4faae65e115e327425cd514c1a35146a85166b |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Mon Sep 24 09:05:31 2007 -0600 |
| |
| Group PCI and PCMCIA drivers in drivers/Makefile |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 5798f87dc10a496d79d3177b9f5a76488987fd35 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Mon Sep 24 09:05:31 2007 -0600 |
| |
| Group block/flash drivers in drivers/Makefile |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit df58c81551700f058b44cacf55a7997fa63bfe0a |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Mon Sep 24 09:05:31 2007 -0600 |
| |
| Group USB drivers in drivers/Makefile |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 5dbb6ed622e539b0c8493ef7e578d3a533181d29 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Mon Sep 24 09:05:30 2007 -0600 |
| |
| Group i2c drivers in drivers/Makefile |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit ec00c76de0e5971273905998d62d6bb119324218 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Mon Sep 24 09:05:30 2007 -0600 |
| |
| Group console drivers in drivers/Makefile |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 754f230aa01b8c789fc31f8013c2487954073300 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Mon Sep 24 09:05:30 2007 -0600 |
| |
| Group network drivers in drivers/Makefile |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit f0037c56b0d12cd46215124667b9f83d60ef9391 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Mon Sep 24 09:05:30 2007 -0600 |
| |
| Build: split COBJS value into multiple lines |
| |
| This change is in preparation for condtitionial compile support in the |
| build system. By spliting them all into seperate lines now, subsequent |
| patches that change 'COBJS-y += ' into 'COBJS-$(CONFIG_<blah>) += ' will |
| be less invasive and easier to review |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 1b4aaffe4fb2a5e95d9111a5d94fd1f89215dce4 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Mon Sep 24 09:05:30 2007 -0600 |
| |
| Add .gitignore files |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| Acked-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 955413f35f054a82e40042f1dbcf501c6a05719b |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Thu Nov 15 08:27:52 2007 -0700 |
| |
| Revert "Correct relocation fixup for mpc5xx" |
| |
| This reverts commit 3649cd99ba815b6601868735765602f00ef3692b. |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit e15633888a058aacb31a62d2cf1278e1e4c236ab |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Thu Nov 15 08:24:32 2007 -0700 |
| |
| Revert "Correct fixup relocation for MPC5xxx" |
| |
| This reverts commit 6f7576b20ecf0d040c3ac3b032b5cbc860e38a90. |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 139365fbe566d0fc619a1ed04452ec5388f0cef8 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Thu Nov 15 08:21:04 2007 -0700 |
| |
| Revert "Correct fixup relocation for mpc8220" |
| |
| This reverts commit a85dd254c0577fca13627c46e93fc2ad4c4f1f00. |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 70922342369e5e39b286fe21e768a239ca07a514 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Thu Nov 15 08:20:57 2007 -0700 |
| |
| Revert "Correct fixup relocation for mpc824x" |
| |
| This reverts commit f3a52fe05923935db86985daf9438e2f70ac39aa. |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 96279ab4cad60cb5972aa934fbe4845ac02cc75a |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Thu Nov 15 08:20:50 2007 -0700 |
| |
| Revert "Correct fixup relocation for mpc8260" |
| |
| This reverts commit 5af61b2f4b838a05f79be274f3e5a66edd2d9c96. |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 928fe33b24cdf382a8dc8687fed24b1961cdb5d6 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Thu Nov 15 08:20:43 2007 -0700 |
| |
| Revert "Correct fixup relocation for mpc83xx" |
| |
| This reverts commit 057004f4a4863554d56cc56268bfa7c7d9738e27. |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit c93945e8f9e300860d2bf73a2549ce5794f8bd00 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Thu Nov 15 08:20:25 2007 -0700 |
| |
| Revert "[MPC512x] Correct fixup relocation" |
| |
| This reverts commit 8d17979d0359492a822a0a409d26e3a3549b4cd4. |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit c9672f81f1bdb4e8ddf62aa72ca0206e8b72aa1c |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Nov 15 14:25:09 2007 +0100 |
| |
| ppc4xx: Small AMCC Kilauea cleanup |
| |
| Remove not needed pci_target_init() function. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit aee747f19b460a0e9da20ff21e90fdaac1cec359 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Nov 15 14:23:55 2007 +0100 |
| |
| ppc4xx: Enable 440 GPIO init table CFG_440_GPIO_TABLE for 405 platforms |
| |
| - Rename CFG_440_GPIO_TABLE to CFG_4xx_GPIO_TABLE |
| - Cleanup of the 4xx GPIO functions |
| - Move some GPIO defines from the cpu headers ppc405.h/ppc440.h into gpio.h |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 8ada0ebf38e4073beea0309188b25d82a112a2ae |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Nov 15 14:20:08 2007 +0100 |
| |
| ppc4xx: AMCC Taihu board config file cleanup |
| |
| This patch makes the AMCC Taihu a little more compatible to the other |
| AMCC eval boards. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 5e71c51d74c963d3174060c078dcacf13bdd02ef |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Thu Nov 15 13:37:28 2007 +0100 |
| |
| [INKA4x0] NG hardware: flash support |
| |
| Disabled and remove inka4x0 custom flash driver, use CFI flash |
| driver instead. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 5fb6d7191e206cdde0e23140fd8111caed93a595 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Thu Nov 15 13:29:55 2007 +0100 |
| |
| [INKA4x0] NG hardware: SDRAM support |
| |
| Add support for three new DDR chips that may be present on a NG |
| INKA4x0 hardware: HYB25D512160BF-5, K4H511638C-7CB3, T46V32M16BN-6IT. |
| |
| Cleanup board/inka4x0/mt48lc16m16a2-75.h file. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit f23cb34c367bb27585a4fdb8a75277370e7d0596 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Thu Nov 15 13:24:43 2007 +0100 |
| |
| [INKA4x0] NG hardware: platform code update |
| |
| - Cleanup compile warnings. |
| - Add missing '\0' in default environment. |
| - Increase CFG_MONITOR_LEN to 256 KiB. |
| - Add required CFG_USE_PPCENV. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 2ae64f5135e51bb18753884d1265b99e89b5aedd |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Thu Nov 15 08:58:00 2007 +0000 |
| |
| Remove warnings re CONFIG_EXTRA_ENV_SETTINGS |
| Remove warnings re onenand_read() & write() |
| |
| commit 2db916e14410e3ec1738508c7bf4dfeb2b299ae7 |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Thu Nov 15 08:45:13 2007 +0000 |
| |
| Correction patch |
| |
| commit 1d8a49eca1c7bdc8db1c47a92f9014a29ead03ae |
| Author: Roy Zang <tie-fei.zang@freescale.com> |
| Date: Thu Sep 13 18:52:28 2007 +0800 |
| |
| Enable ULi1575 Ethernet support in 8610HPCD config |
| |
| Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| Acked-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 54fd6c93c28a0a45352fff5dd92673401ff563f2 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Nov 13 08:18:20 2007 +0100 |
| |
| ppc4xx: lwmon5: Change PHY reset sequence for PHY MDIO address latching |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 7d0a4066b5a6b698e5fc1b66cfe9705774bbce93 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Nov 13 08:06:11 2007 +0100 |
| |
| ppc4xx: Fix 405EX PCIe UTLSET register setup |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 1ce55151c85d068f70317a8d65c61058b891afb4 |
| Author: Heiko Schocher <hs@denx.de> |
| Date: Tue Nov 13 07:50:29 2007 +0100 |
| |
| [UC101] SRAM now with 2 MB working. |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit 2d14684341109a69616e4d6016cd61402d55086f |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Fri Nov 9 15:37:53 2007 +0100 |
| |
| ppc4xx: Use generic usb-ohci driver for sequoia board |
| |
| This patch makes the sequoia board use the generic usb-ohci driver |
| instead of cpu/ppc4xx/usb_ohci.c. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 9be659ac0868dc367caa957c5c725e46b07f6a5f |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Fri Nov 9 15:37:23 2007 +0100 |
| |
| ppc4xx: Make USB working with CONFIG_4xx_DCACHE defined |
| |
| This patch disables the 44x d-cache on 'usb start' and |
| reenables it on 'usb stop'. This should be seen as a |
| temporary fix until the generic usb-ohci driver can |
| life with d-cache enabled. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit fbde2169d2c48fcc9ff03489534a78ffb0a8a0d4 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Fri Nov 9 15:36:44 2007 +0100 |
| |
| ppc4xx: Remove redundant code from 4xx network driver |
| |
| This patch removes some redundant code and decrements the end |
| address of cache flush and invalidate by 1. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 5ca9881aad8c413ac2a82868a5e3719178254502 |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Fri Nov 9 15:24:26 2007 +0000 |
| |
| Add apollon board support |
| Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> |
| |
| commit b53313dbfc74525d85f1e7e0102f902d5c863beb |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Nov 9 12:19:58 2007 +0100 |
| |
| ppc4xx: Remove In:/Out:/Err: boot output for AMCC Kilauea |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit c7f69c340277935a6c19a956421852da944a365f |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Nov 9 12:18:54 2007 +0100 |
| |
| ppc4xx: Make output a little shorter on I2C bootrom detection |
| |
| Most 4xx PPC capable of using an I2C bootrom for bootstrap setting |
| already print a line with the information which I2C bootrom is |
| used for bootstrap configuration. So we don't need this extra line |
| with "I2C boot EEPROM en-/dis-abled". |
| |
| This patch also has a little code cleanup integrated. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 8d737a28152ec12873f8544cca1fb39a49e5e693 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Nov 8 12:50:18 2007 -0600 |
| |
| ColdFire: MCF5329 - Remove reset registers from CCM |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 7d7cdea769a60b0a6e4c18bef7f9d648fd14b8d7 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Nov 8 12:31:11 2007 -0600 |
| |
| ColdFire: MCF5329 - Add Reset structure to immap_5329.h |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 09b26cf00d76d75fdf7fdc4b13e4dd929743bc21 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Nov 8 12:19:01 2007 -0600 |
| |
| ColdFire: MCF5329 - revert include/asm-m68k/m5329.h file mode |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 225a24b5e062ad94627424508ae814f51dbe1a34 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Wed Nov 7 18:00:54 2007 -0600 |
| |
| ColdFire: MCF5445x - Update correct RAMBAR and missing linker files |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 248c7c14835f34d5d910b45e5600050e58ca6cab |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Wed Nov 7 17:56:15 2007 -0600 |
| |
| ColdFire: MCF532x - Update do_reset() using core reset |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit d9240a5f827eb3b476a6ba2938d01f1a9e7688f4 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Wed Nov 7 17:51:00 2007 -0600 |
| |
| ColdFire: Update cpu flag for 4.2-xx compiler |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 070ba56115b4da63b46e974287fa4550d4023386 |
| Author: York Sun <yorksun@freescale.com> |
| Date: Wed Oct 31 14:59:04 2007 -0500 |
| |
| 8610: Add console frame buffer support to FSL 8610 DIU driver. |
| |
| Add cfb console support to FSL 8610 DIU driver. |
| Inspect board version from PIXIS to obtain correct pixel format. |
| |
| Use #define CONFIG_VIDEO in config file to enable fb console. |
| |
| To switch monitor, set monitor variable to |
| 0 - DVI, 1 - Single link LVDS, 2 - Double link LVDS |
| followed by "diufb init". |
| |
| Preserve logo bitmap at the top of the fb console. |
| |
| Signed-off-by: York Sun <yorksun@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit a877880c6949e948bd63cd6ea4e216573d2f53dd |
| Author: York Sun <yorksun@freescale.com> |
| Date: Mon Oct 29 13:58:39 2007 -0500 |
| |
| 8610: Add 8610 DIU display driver |
| |
| 1280x1024 and 1024x768 @ 32 bpp are supported now. |
| DVI, Single-link LVDS, Double-link LVDS are all supported. |
| |
| Environmental variable "monitor" is used to specify monitor port. |
| |
| A new command "diufb" is introduced to reinitialize monitor |
| and display a BMP file in the memory. So far, 1-bit, 4-bit, |
| 8-bit and 24-bit BMP formats are supported. |
| |
| diufb init |
| - initialize the diu driver |
| Enable the port specified in the environmental variable "monitor" |
| |
| diufb addr |
| - display bmp file in memory. |
| The bmp image should be no bigger than the resolution, 1280x1024 |
| for DVI and double-link LVDS, 1024x768 for single-link LVDS. |
| |
| Note, this driver allocate memory but doesn't free it after use |
| It is written on purpose -- to avoid a failure of reallocation |
| due to memory fragement. |
| |
| ECC of DDR is disabled for DIU performance. L2 data cache is also disabled. |
| |
| Signed-off-by: York Sun <yorksun@freescale.com> |
| Signed-off-by: Jon loeliger <jdl@freescale.com> |
| |
| commit 52e5ddfecdda308f75782fae206b677b1810f5f9 |
| Author: York Sun <yorksun@freescale.com> |
| Date: Wed Oct 31 10:43:59 2007 -0500 |
| |
| FSL: Add a freescale bitmap logo. |
| |
| This Freescale logo is a 340 x 128 x 4bpp BMP file |
| that can be displayed by the DIU Framebuffer driver. |
| |
| Signed-off-by: York Sun <yorksun@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 1815338fbd1c0f94f8276d2891b99caa5a05f622 |
| Author: York Sun <yorksun@freescale.com> |
| Date: Mon Oct 29 13:57:53 2007 -0500 |
| |
| 8610: Make some extra debug environment variables conditional. |
| |
| One may #define ENV_DEBUG to get them back again. |
| |
| Signed-off-by: York Sun <yorksun@freescale.com> |
| |
| commit 761421ccca80a9fb37b19c37aa61d46ef75e0647 |
| Author: Jason Jin <Jason.jin@freescale.com> |
| Date: Mon Oct 29 19:26:21 2007 +0800 |
| |
| 8610: Actually enable pixis_reset CONFIGs |
| |
| Signed-off-by: Jason Jin <Jason.jin@freescale.com> |
| |
| commit f3bceaab230b4748d0afc4109b6837308f018b40 |
| Author: Jason Jin <Jason.jin@freescale.com> |
| Date: Fri Oct 26 18:31:59 2007 +0800 |
| |
| Fix the BAT definition of PCI IO on 8610 board |
| |
| The address in the BAT register is aligned with the BAT size. |
| The original definition actually did not define BAT for PCIE2 IO. |
| This patch fix this. |
| |
| Signed-off-by: Jason Jin <Jason.jin@freescale.com> |
| |
| commit 9f23ca334a6f5f021ef9e9d0fad9da80d63b2d56 |
| Author: Jason Jin <Jason.jin@freescale.com> |
| Date: Mon Oct 29 19:26:21 2007 +0800 |
| |
| Unify pixis_reset altbank across board families |
| |
| Basically, refactor the CFG_PIXIS_VBOOT_MASK values |
| into the separate board config files. |
| |
| Signed-off-by: Jason Jin <Jason.jin@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit a8318ec205c8e8794b5f9f1b8584abadb440e8ba |
| Author: Jason Jin <Jason.jin@freescale.com> |
| Date: Fri Oct 26 18:32:00 2007 +0800 |
| |
| make 8610 board use pixis reset |
| |
| Signed-off-by: Jason Jin <Jason.jin@freescale.com> |
| |
| commit 9c84709eedce9c680dd695984ab7d2328f4f04f5 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Thu Nov 1 12:23:29 2007 -0500 |
| |
| 86xx: Fix broken variable reference when #def DEBUGing. |
| |
| Sometimes you can't reference the DDR2 controller variables. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 1f103105a3746ab12279b63b8c1d372c0ce2cc58 |
| Author: Roy Zang <tie-fei.zang@freescale.com> |
| Date: Mon Nov 5 17:39:24 2007 +0800 |
| |
| Implement general ULi 526x Ethernet driver support in U-boot |
| |
| This patch implements general ULi 526x Ethernet driver. |
| Until now, it is the only native Ethernet port on |
| MPC8610HPCD board, but it could be used on other boards |
| with ULi 526x Ethernet port as well. |
| |
| Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| Signed-off-by: Zhang Wei <wei.zhang@freescale.com> |
| Acked-by: Jon Loeliger <jdl@freescale.com> |
| Signed-off-by: Ben Warren <bwarren@qstreams.com> |
| |
| commit 71bc6e6474fea8ef481b9b45d1edd7ad1f6dfbbd |
| Author: Larry Johnson <lrj@arlinx.com> |
| Date: Thu Nov 1 08:46:50 2007 -0500 |
| |
| NET: Add Ethernet 1000BASE-X support for PPC4xx |
| |
| This patch adds support for 1000BASE-X to functions "miiphy_speed ()" and |
| "miiphy_duplex()". It also adds function "miiphy_is_1000base_x ()", which |
| returns non-zero iff the PHY registers are configured for 1000BASE-X. The |
| "mii info" command is modified to distinguish between 1000BASE-T and -X. |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| Signed-off-by: Ben Warren <bwarren@qstreams.com> |
| |
| commit 298035df4948b113d29ac0e694717d34b95bc5dc |
| Author: Larry Johnson <lrj@arlinx.com> |
| Date: Wed Oct 31 11:21:29 2007 -0500 |
| |
| NET: Cosmetic changes |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| Signed-off-by: Ben Warren <bwarren@qstreams.com> |
| |
| commit 654f38b3a387886996a5a75771fbfc29cb4f225e |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Nov 5 07:43:05 2007 +0100 |
| |
| ppc4xx: Make output a little shorter on PCIe detection |
| |
| Now not max 3 lines but 2 lines are printed per PCIe port. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 992742a5b09d9040adbd156fb90756af66ade310 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sat Nov 3 23:09:27 2007 +0100 |
| |
| Cleanup coding style; update CHANGELOG |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit e881cb563e32f45832b7b6db77bdcd017adcbb41 |
| Author: Bruce Adler <bruce.adler@ccpu.com> |
| Date: Fri Nov 2 13:15:42 2007 -0700 |
| |
| fix wording in README |
| |
| Changed the wording to properly describe the shadowing |
| of the environment from ROM to RAM |
| |
| Signed-off-by: Bruce Adler <bruce.adler@acm.org> |
| |
| commit ad845beef06245426c57b53dcdc01b7dc70e0d45 |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Wed Oct 31 02:18:15 2007 +0900 |
| |
| blackfin: Move `-D__BLACKFIN__' to $(ARCH)_config.mk |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit ec22755799466c8a103664bb3a5e647bf9c238f4 |
| Author: Vlad Lungu <vlad@comsys.ro> |
| Date: Thu Oct 25 16:08:14 2007 +0300 |
| |
| Trimmed some variables in ne2000.c |
| |
| Signed-off-by: Vlad Lungu <vlad@comsys.ro> |
| |
| commit eb6f214d3644b2a77968c176ed36dcf858cfe7e0 |
| Author: Zhang Wei <wei.zhang@freescale.com> |
| Date: Thu Oct 25 17:51:27 2007 +0800 |
| |
| Fix the issue of usb_kbd driver missing the scan code of key 'z'. |
| |
| The scan code of the key 'z' is 0x1d, which should be handled. |
| |
| The change has be tested on NOVATEK USB keyboard and ULI PCI OHCI |
| controller. |
| |
| Signed-off-by: Zhang Wei <wei.zhang@freescale.com> |
| |
| commit bbf4796f6498fbade56d56eff3a0a49b299d93e5 |
| Author: Zhang Wei <wei.zhang@freescale.com> |
| Date: Thu Oct 25 17:30:04 2007 +0800 |
| |
| Fix USB support issue for MPC8641HPCN board. |
| |
| The configuration file has already enabled USB, but it |
| missed definition of CFG_OHCI_SWAP_REG_ACCESS, the USB |
| on MPC8641HPCN can not work because of the wrong USB |
| register endian. |
| |
| And add the USB command to U-Boot commands list. |
| |
| Signed-off-by: Zhang Wei <wei.zhang@freescale.com> |
| |
| commit 4e62041023dc3de9d98d977bb080235bc6d035e0 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Wed Oct 24 18:16:01 2007 +0200 |
| |
| Use config_cmd_default.h instead of config_cmd_all.h |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 56622f87857439b1c221e9deef11a9d5bb5d4308 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Wed Oct 24 01:37:36 2007 +0200 |
| |
| TQM5200: Call usb_cpu_init() during board init |
| |
| usb_cpu_init() configures GPS USB pins, clocks, etc. and |
| is required for proper operation of kernel USB subsystem. |
| This setup was previously done in the kernel by the fixup |
| code which is being removed, thus low level init must be |
| done by U-boot now. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 29c29c0267fe857e72014ce90c5d35b2ef6302bd |
| Author: Guennadi Liakhovetski <lg@denx.de> |
| Date: Tue Oct 23 16:25:50 2007 +0200 |
| |
| Fix typo in nfs.c |
| |
| An obvious typo. Originally fixed in linkstation u-boot port. |
| |
| Signed-off-by: Guennadi Liakhovetski <lg@denx.de> |
| |
| commit 59543fe00a4ce720ef9f5aa7fb387c6daf1c7d78 |
| Author: Guennadi Liakhovetski <lg@denx.de> |
| Date: Tue Oct 23 14:35:05 2007 +0200 |
| |
| Fix a typo in cpu/mpc824x/interrupts.c |
| |
| Since December 2003 the timer_interrupt_cpu() function in |
| cpu/mpc824x/interrupts.c contains what seems to be a superfluous |
| parameter. Remove it. |
| |
| Signed-off-by: Guennadi Liakhovetski <lg@denx.de> |
| |
| commit c9e7b9b9a1700fe009678d1f9b41e6364ac5df2d |
| Author: Sergej Stepanov <Sergej.Stepanov@ids.de> |
| Date: Wed Oct 17 11:13:51 2007 +0200 |
| |
| add ft_cpu_setup(..) on mpc8260 |
| |
| Add ft_cpu_setup(..)-function to adapt it for use with libfdt |
| based on code from mpc5xxx |
| |
| Sigend-off-by: Sergej Stepanov <Sergej.Stepanov@ids.de> |
| -- |
| |
| commit 6abd82e19ae93c0b4d104e50165e235915ec0875 |
| Author: Sergej Stepanov <Sergej.Stepanov@ids.de> |
| Date: Wed Oct 17 11:18:42 2007 +0200 |
| |
| changes for IDS8247 board support |
| |
| To get the IDS8247 board working following are done: |
| - FCC2 is deactivated |
| - FCC1 is activated |
| - I2C is activated |
| - CFI driver is activated |
| - Adapted for use with LIBFDT |
| |
| Signed-off-by: Sergej Stepanov <Sergej.Stepanov@ids.de> |
| -- |
| |
| commit 3d6cb3b24add6415f86a0f013ea40f5639b90047 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Nov 3 12:08:28 2007 +0100 |
| |
| ppc4xx: Add AMCC Kilauea/Haleakala NAND booting support |
| |
| This patch adds NAND booting support for the AMCC 405EX(r) eval boards. |
| Again, only one image supports both targets. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 8b6684a698500be9c142ec2c9f46cfc348e17f0c |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Wed Oct 24 15:48:37 2007 +0200 |
| |
| ATSTK1002: Remove default ethernet addresses |
| |
| Wolfgang is right: It's not a good idea to set up default initial |
| ethernet addresses for a board, even though they belong to the local |
| range. |
| |
| This will change the failure mode from "IT manager screams at you for |
| using duplicate ethernet addresses" to a nice error message explaining |
| that the ethernet address hasn't been set properly. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit e5c794e491a57d829b6d8733e2ed8368a2269abf |
| Author: Justin Flammia <jflammia@savantav.com> |
| Date: Mon Oct 29 17:40:35 2007 -0400 |
| |
| DHCP Client Fix |
| |
| This is a multi-part message in MIME format. |
| |
| commit e6e505eae94ed721e123e177489291fc4544b7b8 |
| Author: Justin Flammia <jflammia@savantav.com> |
| Date: Mon Oct 29 17:19:03 2007 -0400 |
| |
| Found a bug in the way the DHCP Request packet is built, where the IP address |
| that is offered by the server is bound to prematurely. This patch is a fix of |
| that bug where the IP address offered by the DHCP server is not used until |
| after the DHCP ACK from the server is received. |
| |
| Signed-off-by: Justin Flammia <jflammia@savantav.com> |
| Signed-off-by: Ben Warren <bwarren@qstreams.com> |
| |
| commit 5d96d40d3f36da33348e68f9ea993f383e11f997 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Oct 31 20:58:34 2007 +0100 |
| |
| ppc4xx: Fix acadia_nand build problem |
| |
| Since the cache handling functions were moved from start.S into cache.S |
| the acadia NAND booting Makfile needs to be adapted accordingly. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit ea2e142843533ca593fcb5cb3e1daf1b7f5e5949 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Oct 31 20:57:11 2007 +0100 |
| |
| ppc4xx: Add CONFIG_4xx_DCACHE compile options to enable cached SDRAM |
| |
| This patch adds the CONFIG_4xx_DCACHE options to some SDRAM init files |
| and to the Sequoia TLB init code. Now the cache can be enabled on 44x |
| boards by defining CONFIG_4xx_DCACHE in the board config file. This |
| option will disappear, when more boards use is successfully and no |
| more known problems exist. |
| |
| This is tested successfully on Sequoia and Katmai. The only problem that |
| needs to be fixed is, that USB is not working on Sequoia right now, since |
| it will need some cache handling code too, similar to the 4xx EMAC driver. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 3db93b8bedd32e914b38976141b3fdf4ea3ff738 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Oct 31 20:51:10 2007 +0100 |
| |
| ppc4xx: Enable CPU POST test for 4xx with dcache enabled |
| |
| Now with caches enabled (i- and d-cache) on 44x, we need a chance to |
| disable the cache for the CPU POST tests, since these tests consist |
| of self modifying code. This is done via the new change_tlb() function. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit f71b2888b4b3c870909a0341427b2a914246f81f |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Oct 31 20:47:26 2007 +0100 |
| |
| ppc4xx: Change 4xx POST ethernet test to handle cached memory too |
| |
| This patch enables the 4xx EMAC POST driver to work too, when dcache is |
| enabled. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit a2685904061b35a17583d65fe47cdc2686a69eaa |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Oct 31 20:45:53 2007 +0100 |
| |
| ppc4xx: Remove temporary TLB entry in POST cache test only for 440 |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit ff768cb168d8157c24a25016dbfbeb465e47f420 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Oct 31 18:01:24 2007 +0100 |
| |
| ppc4xx: Change 4xx ethernet driver to handle cached memory too |
| |
| This patch enables the 4xx EMAC driver to work too, when dcache is |
| enabled. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 483e09a223c666269ef81d3573a6591b1046b0ef |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Oct 31 17:59:22 2007 +0100 |
| |
| ppc4xx: Add change_tlb function to modify I attribute of TLB(s) |
| |
| This function is used to either turn cache on or off in a specific |
| memory area. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit d25dfe08fbd1220cb994e7e6b105049aa9aa8e79 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Oct 31 17:57:52 2007 +0100 |
| |
| ppc4xx: Remove cache definition from 4xx board config files |
| |
| All 4xx board config files don't need the cache definitions anymore. |
| These are now defined in common headers. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 9b94ac61d2176185c30adf0793e079ec30e68687 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Oct 31 17:55:58 2007 +0100 |
| |
| ppc4xx: Rework 4xx cache support |
| |
| New cache handling functions added and all existing functions |
| moved from start.S into seperate cache.S. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 06713773da4ac3d390c63d82641eb553224b27c2 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Oct 23 18:03:12 2007 +0200 |
| |
| ppc4xx: Remove compiler warning from previous commit |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 6fa397df67c0f269e4528bf181a6e8c88f9723f9 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Oct 23 14:40:30 2007 +0200 |
| |
| ppc4xx: Remove temporary TLB entry in POST cache test |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 1338e6a81834099ba19733b69aafd8ef5f098094 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Oct 23 14:05:08 2007 +0200 |
| |
| ppc4xx: Change autonegotiation timeout from 4 to 5 seconds |
| |
| I lately noticed, that newer 4xx board with GBit support sometimes don't |
| finish link autonegotiation in 4 seconds. Changing this timeout to 5 |
| seconds seems fine here. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 2d83476a4c1c9911d158a3f8a4312d354bc1bdb7 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Oct 23 14:03:17 2007 +0200 |
| |
| ppc4xx: Change 4xx_enet & miiphy to use out_be32() and friends |
| |
| This patch changes all in32/out32 calls to use the recommended in_be32/ |
| out_be32 macros instead. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 7d47cee2cc57f907380f2c06f5b6c683d03e423a |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Oct 25 12:24:59 2007 +0200 |
| |
| ppc4xx: Fix POST ethernet test for Haleakala |
| |
| The POST ethernet test needed to be changed to dynamically determine |
| the count of ethernet devices. This code is cloned from the 4xx |
| ethernet driver. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit f10493c6d77a1e07a6c2ff4d772937a5e7359d6a |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Oct 23 11:31:05 2007 +0200 |
| |
| ppc4xx: Correct UART input clock calculation and passing to fdt |
| |
| We now use a value in the gd (global data) structure for the UART input |
| frequency, since the PPC4xx_SYS_INFO struct is always rewritten completely |
| in get_sys_info(). |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 353f2688b4e0fc7b969bc70a02be4b40bf0dd124 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Oct 23 10:10:08 2007 +0200 |
| |
| ppc4xx: Add initial AMCC Haleakala PPC405EXr eval board support |
| |
| The Haleakala is nearly identical with the Kilauea eval board. The only |
| difference is that the 405EXr only supports one EMAC and one PCIe |
| interface. This patch adds support for the Haleakala board by using |
| the identical image for Kilauea and Haleakala. The distinction is done |
| by comparing the PVR. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 9f798766aa85e62eb8fa8c721e148df609b78137 |
| Author: Eugene O'Brien <eugene.obrien@advantechamt.com> |
| Date: Tue Oct 23 08:29:10 2007 +0200 |
| |
| ppc4xx: Fixed offset of refresh rate type for Bamboo on-board DDR SDRAM |
| |
| This patch also adds a note to the fixed DDR setup for Bamboo NAND booting: |
| |
| Note: |
| As found out by Eugene O'Brien <eugene.obrien@advantechamt.com>, the fixed |
| DDR setup has problems (U-Boot crashes randomly upon TFTP), when the DIMM |
| modules are still plugged in. So it is recommended to remove the DIMM |
| modules while using the NAND booting code with the fixed SDRAM setup! |
| |
| Signed-off-by: Eugene O'Brien <eugene.obrien@advantechamt.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit afe9fa59cb63b4f9d16bf01c93eb212f25a38c2a |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Oct 22 16:24:44 2007 +0200 |
| |
| ppc4xx: Add SNTP support to AMCC Katmai, Kilauea & Makalu boards |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 3248f63ad89cb031491edb7016587fe6e9a238b9 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Oct 22 16:22:40 2007 +0200 |
| |
| ppc4xx: Rework of 4xx serial driver (4) |
| |
| Change 4xx_uart.c: |
| |
| - Use in_8/out_8 macros instead of in8/out8 |
| - No need for UART_BASE marco anymore, now really handled via function |
| parameter |
| - serial_init_common() introduced |
| - Further coding style cleanup |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit e61cb8163a66b8a135696ae232e2bead1ce0a049 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Oct 22 15:45:49 2007 +0200 |
| |
| ppc4xx: Rework of 4xx serial driver (3) |
| |
| Change all linker scripts to reference the changed driver name iop480_uart.o. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 882ae41274921f9016131806bdeb27e19606f47a |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Oct 22 15:44:39 2007 +0200 |
| |
| ppc4xx: Rework of 4xx serial driver (2) |
| |
| Change all linker scripts to reference the changed driver name 4xx_uart.o. |
| |
| Note: In most cased all these explicit referencing of these object files |
| in the linker scripts is not neccessary. Only for manually embedded |
| environment into the U-Boot image, which is not done is most cases. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit ad31e40bed042cb670d0036fea96435007afb838 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Oct 22 15:09:59 2007 +0200 |
| |
| ppc4xx: Rework of 4xx serial driver (1) |
| |
| This patch starts the rework of the PPC4xx serial driver. First we split |
| the file into two seperate files, one 4xx_uart.c with the 405/440 UART |
| handling code and the other one iop480_uart.c with the UART code for the |
| PLX-Tech IOP480 PPC (PPC403 based). |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 764e7417ee5f6e25b1715720e7d7dd3487109385 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Oct 22 10:30:38 2007 +0200 |
| |
| ppc4xx: Correct UART input clock calculation and passing to fdt |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 211ea91ac6c225bec7e668a03d0ba7d7310679fa |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Oct 22 07:34:34 2007 +0200 |
| |
| ppc4xx: Add initial AMCC Makalu 405EX support |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit fa8aea20456e6f1dba43f46bcc72024dd9499998 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Oct 22 07:33:52 2007 +0200 |
| |
| ppc4xx: Add freqUART to CPU speed detection |
| |
| This value is needed later for the device tree configuration of |
| the uart clock. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 837c730b4d7c6b1ddf3d1e247cb4445005d9bf0d |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sun Oct 21 14:26:29 2007 +0200 |
| |
| ppc: Small Kilauea cleanup of config file |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 758c037aeead34b49631b8da3a90b1bba14c0410 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sun Oct 21 08:16:12 2007 +0200 |
| |
| rtc: Add Xicor/Intersil X1205 RTC support |
| |
| This patch adds support for the Xicor/Intersil X1205 RTC used on the |
| AMCC Makalu eval board. This driver is basically cloned from the Linux |
| driver version (2.6.23). |
| |
| This patch also introduces the Linux bcd.h header for the BCD2BIN/ |
| BIN2BCD conversions. In the future some of the other U-Boot RTC driver |
| should be converted to also use this header instead of implementing |
| their own local copy of these functions/macros. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 087dfdb79b5fd1ab99a26990c62a732c01a8c7f6 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sun Oct 21 08:12:41 2007 +0200 |
| |
| ppc4xx: Consolidate some of the 405 and 440 macros/structs into 4xx |
| |
| This patch moves some common 4xx macros and the PPC405_SYS_INFO/ |
| PPC440_SYS_INFO structure into the common ppc4xx.h header. |
| |
| Lot's of other macros are good candidates to be consolidated this way |
| in the future. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 770c7af5800f598d22730d1f4b70f16c9b33512e |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sun Oct 21 08:05:18 2007 +0200 |
| |
| ppc4xx: Fix size setup in Kilauea DDR2 init routine |
| |
| The size was initilized wrong. Instead of 256MB, the DDR2 controller |
| was setup to 512MB. Now the correct values is used. |
| |
| This patch also does a little cleanup and adds a comment here. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit f6ba9b56607d4b27550301c7c7f6b55b654fd62a |
| Author: Eugene O'Brien <eugene.obrien@advantechamt.com> |
| Date: Thu Oct 18 17:29:04 2007 +0200 |
| |
| ppc4xx: Define CONFIG_BOOKE for all PPC440 based processors |
| |
| CONFIG_BOOKE must be defined for PPC440 processors so that the proper SPR |
| number is used to access system registers. |
| |
| Signed-off-by: Eugene O'Brien <eugene.obrien@advantechamt.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit c36c68160333ac5fe41ec3db12a728b7075b3912 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Oct 18 07:42:27 2007 +0200 |
| |
| ppc4xx: Change inbound PCIe location for endpoint tests on Katmai |
| |
| On Yucca & Katmai, the inbound memory map pointed to 0x4.0000.0000, which |
| is the internal SRAM. Since I now ported and tested this endpoint mode |
| on Kilauea successfully to map to 0 (SDRAM), I also changed this for |
| Katmai. |
| |
| Yucca will stay at internal SRAM for now. Not sure if somebody relies on |
| this setup. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 5cb4af4791f61843432155142b6cfac901f66c10 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Oct 18 07:39:38 2007 +0200 |
| |
| ppc4xx: Add PCIe endpoint support on Kilauea (405EX) |
| |
| This patch adds endpoint support for the AMCC Kilauea eval board. It can |
| be tested by connecting a reworked PCIe cable (only 1x lane singles |
| connected) to another root-complex. |
| |
| In this test setup, a 64MB inbound window is configured at BAR0 which maps |
| to 0 on the PLB side. So accessing this BAR0 from the root-complex will |
| access the first 64MB of the SDRAM on the PPC side. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit d4cb2d17946466740afeb195a57d6cb290bf4cc0 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Oct 13 16:43:23 2007 +0200 |
| |
| ppc4xx: Dynamic configuration of 4xx PCIe mode as root or endpoint mode |
| |
| This patch adds support for dynamic configuration of PCIe ports for the |
| AMCC PPC4xx boards equipped with PCIe interfaces. These are the PPC440SPe |
| boards Yucca & Katmai and the 405EX board Kilauea. |
| |
| This dynamic configuration is done via the "pcie_mode" environement |
| variable. This variable can be set to "EP" or "RP" for endpoint or |
| rootpoint mode. Multiple values can be joined via the ":" delimiter. |
| Here an example: |
| |
| pcie_mode=RP:EP:EP |
| |
| This way, PCIe port 0 will be configured as rootpoint, PCIe port 1 and 2 |
| as endpoint. |
| |
| Per default Yucca will be configured as: |
| pcie_mode=RP:EP:EP |
| |
| Per default Katmai will be configured as: |
| pcie_mode=RP:RP:REP |
| |
| Per default Kilauea will be configured as: |
| pcie_mode=RP:RP |
| |
| Signed-off-by: Tirumala R Marri <tmarri@amcc.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit fd671802b67a0ef37a06124fa2ce85f00aa22c6f |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Oct 11 11:15:59 2007 +0200 |
| |
| ppc4xx: Enable device tree support (fdt) on Kilauea per default |
| |
| This patch enables the fdt support on the AMCC Kilauea eval board. |
| Additionally now EBC ranges fdt fixup is included to support NOR |
| FLASH mapping via the Linux physmap_of driver. |
| |
| This Kilauea port now support booting arch/ppc and arch/powerpc |
| Linux kernels. The default environment "net_nfs" is for arch/ppc |
| and "net_nfs_fdt" is for arch/powerpc. In the long run, arch/ppc |
| support will be removed. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 4994ffd890b9d95d807387a9b7bd8a4803ee406e |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Oct 11 11:11:45 2007 +0200 |
| |
| ppc4xx: Add additional debug info to 4xx fdt support |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit db3232ddb058d0ed0bc31f7c5c296748a1afac67 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Oct 5 21:28:58 2007 +0200 |
| |
| ppc4xx: Fix small merge problems with CPCI440 and Acadia boards |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 1941cce71b1ae975602854045061e82f94ecd012 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Oct 5 17:35:10 2007 +0200 |
| |
| ppc4xx: Fix small merge problem in 4xx_enet.c |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 566806ca1a1bf4d895daaf0b2ba5494abbffebaf |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Oct 5 17:11:30 2007 +0200 |
| |
| ppc4xx: Add initial AMCC Kilauea 405EX support |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit dbbd125721aea6645fdb962f36bd41f59e272f9d |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Oct 5 17:10:59 2007 +0200 |
| |
| ppc4xx: Add PPC405EX support |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 1d7b874e9c9a7c66f5d8da9ec78a3733765d3e31 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Oct 5 17:09:36 2007 +0200 |
| |
| ppc4xx: Cleanup of 4xx PCI and PCIe support (renaming) |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 4f14ed6230b9c109aac9a6fb878497dabd44c2db |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Oct 5 17:07:50 2007 +0200 |
| |
| ppc4xx: Add initial fdt support to 4xx (first needed on 405EX) |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit a424a8bb2924b90724b944165d3141f1fa8dfe5b |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Oct 5 17:04:57 2007 +0200 |
| |
| POST: Add 405EX support to 4xx UART POST test |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 4f2e92c11f6e2392fc8187829211a5ca7f0c1e12 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Oct 5 15:10:02 2007 +0200 |
| |
| DTT: Prepare DS1775 driver for use of different I2C addresses |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 19e93b1e16d267220440d827b920fbad8abfa70f |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Oct 5 14:23:43 2007 +0200 |
| |
| ppc4xx: 4xx_pcie: Change PCIe status output to match common style |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit ff68f66bcb0da847845aa2fac11eba6c25938c99 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Oct 5 09:22:33 2007 +0200 |
| |
| ppc4xx: 4xx_pcie: Disable debug output as default |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 97923770cb52b64d69eec958a11b2eda8d46e0f7 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Oct 5 09:18:23 2007 +0200 |
| |
| ppc4xx: 4xx_pcie: More general cleanup and 405EX PCIe support added |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 4dbee8a90df613eb517aadbecebd70f168913d30 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Oct 5 07:57:20 2007 +0200 |
| |
| ppc4xx: 4xx_pcie: Change CFG_PCIE_MEMSIZE to 128MB on Yucca & Katmai |
| |
| 128MB seems to be the smallest possible value for the memory size |
| for on PCIe port. With this change now the BAR's of the PCIe cards |
| are accessible under U-Boot. |
| |
| One big note: This only works for PCIe port 0 & 1. For port 2 this |
| currently doesn't work, since the base address is now 0xc0000000 |
| (0xb0000000 + 2 * 0x08000000), and this is already occupied by |
| CFG_PCIE0_CFGBASE. But solving this issue for port 2 would mean |
| to change the base addresses completely and this change would have |
| too much impact right now. |
| |
| This patch adds debug output to the 4xx pcie driver too. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 6d95289281ed2958ebf76d2b55f86bbd88591fd2 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Oct 3 21:16:32 2007 +0200 |
| |
| ppc4xx: 4xx_pcie: Fix problem with SDRN access using port number as idx |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 3048bcbf0bad262378c5af68f2bf6778fb7d829a |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Oct 3 15:01:02 2007 +0200 |
| |
| ppc4xx: Rename 405gp_pci to 4xx_pci since its used on all 4xx platforms |
| |
| These files were introduced with the IBM 405GP but are currently used on all |
| 4xx PPC platforms. So the name doesn't match the content anymore. This patch |
| renames the files to 4xx_pci.c/h. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 94276eb0a7a35b9e8c053d589ae225b0f017a237 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Oct 3 14:14:58 2007 +0200 |
| |
| ppc4xx: Add a comment for 405EX PCIe endpoint configuration |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 03d344bb6a5f082ea10ec9d753558ea7dfd1c626 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Oct 3 10:38:09 2007 +0200 |
| |
| ppc4xx: Make 440SPe PCIe code more generic to use on different 4xx PPCs (3) |
| |
| (3) This patch introduces macros like SDRN_PESDR_DLPSET(port) to access |
| the SDR registers of the PCIe ports. This makes the overall design |
| clearer, since it removed a lot of switch statements which are not |
| needed anymore. |
| |
| Also, the functions ppc4xx_init_pcie_rootport() and |
| ppc4xx_init_pcie_entport() are merged into a single function |
| ppc4xx_init_pcie_port(), since most of the code was duplicated. |
| This makes maintainance and porting to other 4xx platforms |
| easier. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 026f71106871f31d17d0ea0db9a7547ff92934bc |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Oct 3 07:48:09 2007 +0200 |
| |
| ppc4xx: Make 440SPe PCIe code more generic to use on different 4xx PPCs (2) |
| |
| This patch is the first patch of a series to make the 440SPe PCIe code |
| usable on different 4xx PPC platforms. In preperation for the new 405EX |
| which is also equipped with PCIe interfaces. |
| |
| (2) This patch renames the functions from 440spe_ to 4xx_ with a |
| little additional cleanup |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit c7c6da23028f146d912514b95aefa3da7cf37699 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Oct 3 07:34:10 2007 +0200 |
| |
| ppc4xx: Make 440SPe PCIe code more generic to use on different 4xx PPCs (1) |
| |
| This patch is the first patch of a series to make the 440SPe PCIe code |
| usable on different 4xx PPC platforms. In preperation for the new 405EX |
| which is also equipped with PCIe interfaces. |
| |
| (1) This patch renames the files from 440spe_pcie to 4xx_pcie |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 245a362ad3c0c1b84fccc9fec7b623eb14f6e502 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Wed Oct 24 01:37:36 2007 +0200 |
| |
| TQM5200: Call usb_cpu_init() during board init |
| |
| usb_cpu_init() configures GPS USB pins, clocks, etc. and |
| is required for proper operation of kernel USB subsystem. |
| This setup was previously done in the kernel by the fixup |
| code which is being removed, thus low level init must be |
| done by U-boot now. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| Signed-off-by: Markus Klotzbuecher <mk@denx.de> |
| |
| commit b5af773f8d92677e06f3295b45557c9d0a487c24 |
| Author: Zhang Wei <wei.zhang@freescale.com> |
| Date: Thu Oct 25 17:51:27 2007 +0800 |
| |
| Fix the issue of usb_kbd driver missing the scan code of key 'z'. |
| |
| The scan code of the key 'z' is 0x1d, which should be handled. |
| |
| The change has be tested on NOVATEK USB keyboard and ULI PCI OHCI |
| controller. |
| |
| Signed-off-by: Zhang Wei <wei.zhang@freescale.com> |
| Signed-off-by: Markus Klotzbuecher <mk@denx.de> |
| |
| commit 85ac988e86f9414fa645b0148dc66c3520a1eb84 |
| Author: Rodolfo Giometti <giometti@enneenne.com> |
| Date: Mon Oct 15 11:59:17 2007 +0200 |
| |
| PXA USB OHCI: "usb stop" implementation. |
| |
| Some USB keys need to be switched off before loading the kernel |
| otherwise they can remain in an undefined status which prevents them |
| to be correctly recognized by the kernel. |
| |
| Signed-off-by: Rodolfo Giometti <giometti@linux.it> |
| Signed-off-by: Markus Klotzbuecher <mk@denx.de> |
| |
| commit 31548249decf18a6b877a18436b6139dd483fe4a |
| Author: Justin Flammia <jflammia@savantav.com> |
| Date: Mon Oct 29 17:40:35 2007 -0400 |
| |
| DHCP Client Fix |
| |
| This is a multi-part message in MIME format. |
| |
| commit e6e505eae94ed721e123e177489291fc4544b7b8 |
| Author: Justin Flammia <jflammia@savantav.com> |
| Date: Mon Oct 29 17:19:03 2007 -0400 |
| |
| Found a bug in the way the DHCP Request packet is built, where the IP address |
| that is offered by the server is bound to prematurely. This patch is a fix of |
| that bug where the IP address offered by the DHCP server is not used until |
| after the DHCP ACK from the server is received. |
| |
| Signed-off-by: Justin Flammia <jflammia@savantav.com> |
| Signed-off-by: Ben Warren <bwarren@qstreams.com> |
| |
| commit e8ee8f3ade2a06c1893dd5e68f223070d650c7ed |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Oct 25 17:16:22 2007 -0500 |
| |
| ColdFire 54455: Fix correct boot location for atmel and intel |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 688e8eb414ac111cca7ce60bdf30e805ab9a7bcb |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Oct 25 17:14:00 2007 -0500 |
| |
| ColdFire: Fix build error when CONFIG_WATCHDOG is defined |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit c67e12e705b204cfe914e3e3e693d69a445dcabf |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Oct 25 17:12:36 2007 -0500 |
| |
| ColdFire 5329: Assign correct SDRAM size and fix cache |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 95e9f2c212a65610b2e59a5c00d0113383a4da0b |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Oct 25 17:10:23 2007 -0500 |
| |
| ColdFire 5253: Assign correct SDRAM size |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 2acefa72ee0026f862ab65597ca687428f63a973 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Oct 25 17:09:17 2007 -0500 |
| |
| ColdFire 5282: Fix external flash boot and return dramsize |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit d78791ae914d4e7c5edca1cdad73b3dc81a4eb82 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Thu Oct 25 17:20:01 2007 +0200 |
| |
| TQM5200: increase kernel_addr_r and fdt_addr_r (hinted by Wolfgang Denk). |
| |
| Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit 1a0ce20aa4cb4e3068da04e7290ee9986fd0b834 |
| Author: Martin Krause <martin.krause@tqs.de> |
| Date: Wed Oct 24 08:42:25 2007 +0200 |
| |
| TQM5200: fix spurious characters on second serial interface |
| |
| With this patch PSC3 is configured as UART. This is done, because if |
| the pins of PSC3 are not configured at all (-> all pins are GPI), |
| due to crosstalk, spurious characters may be send over the RX232_2_TXD |
| signal line. |
| |
| Signed-off-by: Martin Krause <martin.krause@tqs.de> |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit be4a87f11e297a5cededbf7dd71c0248f3874acd |
| Author: Martin Krause <martin.krause@tqs.de> |
| Date: Wed Oct 24 08:41:27 2007 +0200 |
| |
| TQM5200S: fix commands for STK52xx base board because of missing SM501 grafic controller |
| |
| Some commands for the STK52xx base board try to access the SM501 grafic |
| controller. But the TQM5200S has no grafic controller (only the TQM5200 |
| and the TQM5200B have). This patch deactivates the commands accessing |
| the SM501 for the TQM5200S. |
| |
| Signed-off-by: Martin Krause <martin.krause@tqs.de> |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit b31f64343ead9482cd439b1adbe4c34026a641b1 |
| Author: Martin Krause <martin.krause@tqs.de> |
| Date: Mon Oct 22 16:45:53 2007 +0200 |
| |
| TQM5200: fix spurious characters on second serial interface |
| |
| With this patch PSC3 is configured as UART. This is done, because if |
| the pins of PSC3 are not configured at all (-> all pins are GPI), |
| due to crosstalk, spurious characters may be send over the RX232_2_TXD |
| signal line. |
| |
| Signed-off-by: Martin Krause <martin.krause@tqs.de> |
| |
| commit 0fc0f91b20ffa802f5a66534ca5c2844910583f6 |
| Author: Martin Krause <martin.krause@tqs.de> |
| Date: Mon Oct 22 16:40:06 2007 +0200 |
| |
| TQM5200S: fix commands for STK52xx base board because of missing SM501 grafic controller |
| |
| Some commands for the STK52xx base board try to access the SM501 grafic |
| controller. But the TQM5200S has no grafic controller (only the TQM5200 |
| and the TQM5200B have). This patch deactivates the commands accessing |
| the SM501 for the TQM5200S. |
| |
| Signed-off-by: Martin Krause <martin.krause@tqs.de> |
| |
| commit 7b0a42219f30277f71f4405cbaf8a269f6d2d227 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sun Oct 21 09:14:28 2007 +0200 |
| |
| Mips: Fix string functions differ prototype declaration |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit cb8250fe4b3c4ed549b270e8a20bc22060e7e1d2 |
| Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Date: Fri Oct 19 17:51:40 2007 -0500 |
| |
| fsl_pci_init enable COMMAND_MEMORY if inbound window |
| |
| Patch 16e23c3f removed PCSRBAR allocation. But passing zero windows |
| to pciauto_setup_device has the side effect of not getting |
| COMMAND_MEMORY set. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| |
| commit e9d0d527992566ebef9826962ff1745b2f082b92 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Fri Oct 19 10:55:24 2007 +0200 |
| |
| delta: Fix OHCI_REGS_BASE undeclared and wait_ms implicit declaration |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 9c4884f54da982ce990c7d1760ac81b0704d3c64 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Fri Oct 19 08:10:15 2007 +0200 |
| |
| fix warning: no return statement in function returning non-void |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit e78220f6e514206757acfe247297fc9a328a881f |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Fri Oct 19 06:33:45 2007 +0200 |
| |
| xsengine: Fix no partition type specified, use DOS as default |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 10cdb8dbd67a818823ab9ec88b68fc348903db59 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Fri Oct 19 00:24:59 2007 +0200 |
| |
| lubbock: Fix no partition type specified, use DOS as default |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 41b4d282d38fa7231c315c5f6cfff5bdd24e0191 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Oct 23 16:50:03 2007 +0200 |
| |
| Coding style: keep lists sorted; update CHANGELOG |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 58b74b05c621e2835ecf4e2d3243042cf4186777 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Fri Oct 19 00:09:05 2007 +0200 |
| |
| Fix missing drivers makefile entries ds1722.c mw_eeprom.c |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 96455bfebc9887837095c9051d216f53c61b5f10 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Fri Oct 19 00:07:39 2007 +0200 |
| |
| Fix warning differ in signedness in board/innokom/innokom.c |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 2a4741d9a14ec475f50e9856d2c0a67e8b4271bd |
| Author: Marcel Ziswiler <marcel@ziswiler.com> |
| Date: Fri Oct 19 00:25:33 2007 +0200 |
| |
| fix pxa255_idp board |
| |
| The pxa255_idp being an old unmaintained board showed several issues: |
| 1. CONFIG_INIT_CRITICAL was still defined. |
| 2. Neither CONFIG_MAC_PARTITION nor CONFIG_DOS_PARTITION was defined. |
| 3. Symbol flash_addr was undeclared. |
| 4. The boards lowlevel_init function was still called memsetup. |
| 5. The TEXT_BASE was still 0xa3000000 rather than 0xa3080000. |
| 6. Using -march=armv5 instead of -march=armv5te resulted in lots of |
| 'target CPU does not support interworking' warnings on recent compilers. |
| 7. The PXA's serial driver redefined FFUART, BTUART and STUART used as |
| indexes rather than the register definitions from the pxa-regs header |
| file. Renamed them to FFUART_INDEX, BTUART_INDEX and STUART_INDEX to |
| avoid any ambiguities. |
| 8. There were several redefinition warnings concerning ICMR, OSMR3, |
| OSCR, OWER, OIER, RCSR and CCCR in the PXA's assembly start file. |
| 9. The board configuration file was rather outdated. |
| 10. The part header file defined the vendor, product and revision arrays |
| as unsigned chars instead of just chars in the block_dev_desc_t |
| structure. |
| |
| Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> |
| |
| commit 298cd4cafe81ff8a6c87be8fbc440a20720d3ed6 |
| Author: Rune Torgersen <runet@innovsys.com> |
| Date: Wed Oct 17 11:56:31 2007 -0500 |
| |
| Make MPC8266ADS command selection more robust |
| |
| Fix MPC8266 command line definition so it won't break when new commands |
| are added to u-boot. |
| Signed-off-by Rune Torgersen <runet@innovsys.com> |
| |
| commit d3afa1ee19345a31fd1eaad3e98b97d13ca47315 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Tue Oct 23 13:14:10 2007 +0200 |
| |
| Motion-PRO: Update configuration to accomodate next generation board. |
| |
| New board has faster oscillator and a different Flash chip. This affects: |
| - CFG_MPC5XXX_CLKIN |
| - SDRAM timings |
| - Flash CS configuration (timings) |
| - Flash sector size, and thus MTD partition layout |
| - malloc() arena size (due to bigger Flash sectors) |
| - smaller memory test range (due to bigger malloc() arena) |
| |
| This patch also enables more extensive memory testing via "mtest". |
| |
| Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit eff501904df2bf1724a750062628ba2c51dbb1f8 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Tue Oct 23 11:36:07 2007 +0200 |
| |
| Motion-PRO: Add setting of SDelay reg. to SDRAM controller configuration. |
| |
| Per AN3221 (MPC5200B SDRAM Initialization and Configuration), the SDelay |
| register must be written a value of 0x00000004 as the first step of the |
| SDRAM contorller configuration. |
| |
| Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit 7a9348728ebda63cdbaacffd83099aa71d9d4c54 |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Tue Oct 23 10:22:16 2007 +0100 |
| |
| Move PL01* serial drivers to drivers/serial and adjust Makefiles. |
| |
| commit 20d500d531a6b971ce6cc1bf191cb0092cdc0afc |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Oct 23 10:17:42 2007 +0200 |
| |
| ppc4xx: lwmon5: Some further GPIO config changes |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit de9a738faa7c2f47286119c3bfebc3dfbfe7d86d |
| Author: Vlad Lungu <vlad@comsys.ro> |
| Date: Sun Oct 21 22:10:10 2007 +0900 |
| |
| [MIPS] Fix UNCACHED_SDRAM |
| |
| PHYSADDR is for physical address, KSEG1ADDR is for uncached. |
| |
| Signed-off-by: Vlad Lungu <vlad@comsys.ro> |
| Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| |
| commit 00101dd7a32d12f698150123e47e4b3420279f86 |
| Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| Date: Sun Oct 21 21:30:42 2007 +0900 |
| |
| [MIPS] Add PIC-related switches to PLATFORM_{CPP,LD}FLAGS and cleanup |
| |
| Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| |
| commit eb700636db017d310edaeb559b13d82588560674 |
| Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| Date: Sun Oct 21 10:55:37 2007 +0900 |
| |
| [MIPS] u-boot.lds: Define _gp in a standard manner |
| |
| Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| |
| commit 22069215eb7adf5a3888bf7c7784ea9d70a72cd0 |
| Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| Date: Sun Oct 21 10:55:36 2007 +0900 |
| |
| [MIPS] Fix $gp usage |
| |
| Now we load $gp with _GLOBAL_OFFSET_TABLE_, but this is incorrect use. |
| As a general principle, we should use _gp for $gp. |
| |
| Thanks to linker script's help we fortunately have _gp which equals to |
| _GLOBAL_OFFSET_TABLE_. But once _gp gets out of alignment, we will not |
| be able to access to GOT entires, global variables and procedure entry |
| points. The right thing to do is to use _gp. |
| |
| This patch also introduce a new symbol `.gpword _GLOBAL_OFFSET_TABLE_' |
| which holds the offset from _gp. When updating GOT entries, we use this |
| offset and _gp to calculate the final _GLOBAL_OFFSET_TABLE_. |
| |
| This patch is originally submitted by Vlad Lungu <vlad@comsys.ro>, then |
| I made some change to leave over num_got_entries. |
| |
| Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| Cc: Vlad Lungu <vlad@comsys.ro> |
| |
| commit cbf2323b5b8285ea01acba7bbb905a3162d9b021 |
| Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| Date: Sun Oct 21 10:55:36 2007 +0900 |
| |
| [MIPS] u-boot.lds: Fix __got_start and __got_end |
| |
| Ensure that __got_start points to top of the `.got', and __got_end points |
| to bottom as well, so that we never fail to count num_got_entries. |
| |
| Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| |
| commit e5f325fec5b48ae705c89522923ba5a2e37cd5c7 |
| Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| Date: Sun Oct 21 10:55:36 2007 +0900 |
| |
| [MIPS] u-boot.lds: Remove duplicated .sdata section |
| |
| Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| |
| commit 05bf4919c1ce49cdedadacd564d0786a8ed796a1 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Oct 21 01:01:17 2007 +0200 |
| |
| Minor coding style cleanup; update CHANGELOG |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit ff285ca07eda1ea4a8909848cc1cc604ec8fec9c |
| Author: Vlad Lungu <vlad@comsys.ro> |
| Date: Thu Oct 4 20:47:10 2007 +0300 |
| |
| Fix NE2000 driver: |
| |
| Fixed typo in ne2000.h, thinko re n2k_inb() usage, don't try |
| to do anything in eth_stop() if eth_init() was not called. |
| Simplified RX path in order to avoid timeouts on really really |
| fast NE2000 cards (read: qemu with internal tftp), NetLoop() is |
| clever enough to cope with 1 packet per eth_rx(). |
| |
| Signed-off-by: Vlad Lungu <vlad@comsys.ro> |
| |
| commit df90968b48fb34fa9072fab150db2ac89678f537 |
| Author: urwithsughosh@gmail.com <urwithsughosh@gmail.com> |
| Date: Mon Sep 24 13:32:13 2007 -0400 |
| |
| Setting MSR[DE] in do_reset |
| |
| Hello, |
| This patch ensures the soft reset of the board for the 85xx boards |
| by setting the MSR[DE] in the do_reset function. |
| |
| Signed-off-by: Sughosh Ganu <urwithsughosh@gmail.com> |
| |
| commit 1e701e701304b3c3a3768ca83dd2ab7b9e88c77d |
| Author: urwithsughosh@gmail.com <urwithsughosh@gmail.com> |
| Date: Mon Sep 24 13:36:01 2007 -0400 |
| |
| MSR overwrite fix |
| |
| Hello, |
| This patch fixes the MSR overwrite in the start.S when moving out of |
| the last 4K page. |
| |
| Signed-off-by: Sughosh Ganu <urwithsughosh@gmail.com> |
| |
| commit 5c7ea64bb74a850a2b2303f853a8270695ad8602 |
| Author: Dan Wilson <dwilson@fulcrummicro.com> |
| Date: Fri Oct 19 11:33:48 2007 -0500 |
| |
| tsec driver should clear RHALT on startup |
| |
| This was causing problems for some people. |
| |
| Signed-off-by: Alain Gravel <agravel@fulcrummicro.com> |
| Signed-off-by: Dan Wilson <dwilson@fulcrummicro.com> |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 7600d47b8f6a10019e537dc9a62aa1498df58d25 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Oct 11 00:29:18 2007 -0500 |
| |
| Improve handling of PCI interrupt device tree fixup on MPC85xx CDS |
| |
| On the MPC85xx CDS we have two issues: |
| |
| 1. The device tree fixup code did not check to see if the property we are |
| trying to update is actually found. Its possible that it would update |
| random memory starting at 0. |
| |
| 2. Newer Linux kernel's have moved the location of the PCI nodes to be |
| sibilings of the soc node and not children. The explicit PATH to the PCI |
| node would not be found for these device trees. Add the ability to handle |
| both paths. In the future we shouldn't handle such fixups by explicit path. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit a3063eec775719b7e91023bbec3f64b3118791df |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Oct 11 00:18:48 2007 -0500 |
| |
| Set OF_STDOUT_PATH to match the default console on MPC8568 MDS |
| |
| On the MPC8568 MDS we use ttyS0, UART0, etc. as the standard configured |
| console. Make it so we match that config what we tell Linux as the early |
| STDOUT console. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit e1ce3cb617bb06f91f82f98915391175addf3e82 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Tue Oct 2 11:12:27 2007 -0500 |
| |
| Remove magic numbers from cache related operations for mpc85xx |
| |
| The mpc85xx start code uses some magic numbers that we actually |
| have #defines for in <config.h> so use those instead. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 5441f61a3d8b7034f19fc1361183e936198e6dbb |
| Author: Detlev Zundel <dzu@denx.de> |
| Date: Fri Oct 19 16:47:26 2007 +0200 |
| |
| Fix two typos. |
| |
| Signed-off-by: Detlev Zundel <dzu@denx.de> |
| |
| commit 281df457c1aa50d2752165d0c5c3282d4027b974 |
| Author: Tony Li <tony.li@freescale.com> |
| Date: Thu Oct 18 17:47:19 2007 +0800 |
| |
| mpc83xx: Add configure entry for MPC83xx ATM support |
| |
| Add MPC8360EMDS_ATM_config and MPC832XEMDS_ATM_config into |
| Makfile and MAKEALL |
| |
| Signed-off-by: Tony Li <tony.li@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit d2646554f529a9577515eceb0ec5eceee18244ba |
| Author: Tony Li <tony.li@freescale.com> |
| Date: Thu Oct 18 17:44:38 2007 +0800 |
| |
| mpc83xx: pq-mds-pib.c typo error |
| |
| Correct to val8 from val. |
| |
| Signed-off-by: Tony Li <tony.li@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 3e11ae80fec1ee12194940955431186abf6009c2 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Oct 17 15:40:19 2007 +0200 |
| |
| ppc4xx: Add 667/133 (CPU/PLB) frequency setup to Sequoia bootstrap command |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 3c89d75409eb26639d36dfa11d4ee3d8b962dc3c |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Oct 16 15:27:43 2007 -0500 |
| |
| Initial mpc8610hpcd Makefile files. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Signed-off-by: Mahesh Jade <mahesh.jade@freescale.com> |
| Signed-off-by: Jason Jin <Jason.jin@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 9553df86d3a319c3a1a7cde7e4edd6eeb5aa64c7 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Oct 16 15:26:51 2007 -0500 |
| |
| Initial mpc8610hpcd cpu/, README and include/ files. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Signed-off-by: Mahesh Jade <mahesh.jade@freescale.com> |
| Signed-off-by: Jason Jin <Jason.jin@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 3dd2db53ceb0dff80f25c2a07f83f29b907b403e |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Oct 16 13:54:01 2007 -0500 |
| |
| Initial mpc8610hpcd board files. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Signed-off-by: Mahesh Jade <mahesh.jade@freescale.com> |
| Signed-off-by: Jason Jin <Jason.jin@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 7ee6ba1a056e4061ab4cfde30127e332e7957afd |
| Author: runet@innovsys.com <runet@innovsys.com> |
| Date: Tue Oct 16 14:50:40 2007 -0500 |
| |
| Make MPC8266ADS board compile again. |
| |
| Signed-off-by: Runet Torgersen <runet@innovsys.com> |
| |
| commit 2491167c245d8ebe6f2dbd8c4287aaa0d14fe93a |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Aug 27 12:41:03 2007 -0500 |
| |
| 86xx: Allow for fewer DDR slots per memory controller. |
| |
| As a direct correlation exists between DDR DIMM slots |
| and SPD EEPROM addresses used to configure them, use |
| the individually defined SPD_EEPROM_ADDRESS* values to |
| determine if a DDR DIMM slot should have its SPD |
| configuration read or not. |
| |
| Effectively, this now allows for 1 or 2 DIMM slots |
| per memory controller. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 4d4a945e189a2f384c66432316da2788a0ac1607 |
| Author: Rodolfo Giometti <giometti@enneenne.com> |
| Date: Mon Oct 15 11:59:17 2007 +0200 |
| |
| PXA USB OHCI: "usb stop" implementation. |
| |
| Some USB keys need to be switched off before loading the kernel |
| otherwise they can remain in an undefined status which prevents them |
| to be correctly recognized by the kernel. |
| |
| Signed-off-by: Rodolfo Giometti <giometti@linux.it> |
| |
| commit e2e93442e558cf1500e92861f99713b2f045ea22 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Oct 15 11:39:00 2007 +0200 |
| |
| ppc4xx: Fix bug in I2C bootstrap values for Sequoia/Rainier |
| |
| The I2C bootstrap values that can be setup via the "bootstrap" command, |
| were setup incorrect regarding the generation of the internal sync PCI |
| clock. The values for PLB clock == 133MHz were slighly incorrect and the |
| values for PLB clock == 166MHz were totally incorrect. This could |
| lead to a hangup upon booting while PCI configuration scan. |
| |
| This patch fixes this issue and configures valid PCI divisor values |
| for the sync PCI clock, with respect to the provided external async |
| PCI frequency. |
| |
| Here the values of the formula in the chapter 14.2 "PCI clocking" |
| from the 440EPx users manual: |
| |
| AsyncPCICLK - 1MHz <= SyncPCIClk <= (2 * AsyncPCIClk) - 1MHz |
| |
| 33MHz async PCI frequency: |
| PLB = 133: |
| => 32 <= 44.3 <= 65 (div = 3) |
| |
| PLB = 166: |
| => 32 <= 55.3 <= 65 (div = 3) |
| |
| 66MHz async PCI frequency: |
| PLB = 133: |
| => 65 <= 66.5 <= 132 (div = 2) |
| |
| PLB = 166: |
| => 65 <= 83 <= 132 (div = 2) |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 5a5958b7de70ae99f0e7cbd5c97ec1346e051587 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Oct 15 11:29:33 2007 +0200 |
| |
| ppc4xx: Fix incorrect 33/66MHz PCI clock log-message on Sequoia & Yosemite |
| |
| The BCSR status bit for the 66MHz PCI operation was correctly |
| addressed (MSB/LSB problem). Now the correct currently setup |
| PCI frequency is displayed upon bootup. |
| |
| This patch also fixes this problem on Rainier & Yellowstone, since these |
| boards use the same souce code as Sequoia & Yosemite do. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit da3aad55cbde80ab6e301aafa82a2c411aa53eff |
| Author: Martin Krause <martin.krause@tqs.de> |
| Date: Wed Sep 26 17:55:56 2007 +0200 |
| |
| TQM860M: adjust for doubled flash sector size. |
| |
| Adjust flash map to support the new S29GLxxN (N-Type) Flashes with |
| doubled sector size. |
| |
| Signed-off-by: Martin Krause <martin.krause@tqs.de> |
| |
| commit 9d29250e2e62f4bf20c7a20b4173d84c48f11f5d |
| Author: Jens Gehrlein <jens.gehrlein@tqs.de> |
| Date: Wed Sep 26 17:55:54 2007 +0200 |
| |
| TQM8xx: Fix CAN timing. |
| |
| Signed-off-by: Martin Krause <martin.krause@tqs.de> |
| |
| commit d43e489baf02afae49077791fb22332d240d8656 |
| Author: Martin Krause <martin.krause@tqs.de> |
| Date: Thu Sep 27 14:54:36 2007 +0200 |
| |
| TQM866M: fix SDRAM refresh |
| |
| At 133 MHz the current SDRAM refresh rate is too fast |
| (measured 4 * 1.17 us). |
| CFG_MAMR_PTA changes from 39 to 97. This result |
| in a refresh rate of 4 * 7.8 us at the default clock |
| 50 MHz. At 133 MHz the value will be then 4 * 2.9 us. |
| This is a compromise until a new method is found to |
| adjust the refresh rate. |
| |
| Signed-off-by: Martin Krause <martin.krause@tqs.de> |
| |
| commit 9ef57bbee1c67cc01da2026c242c4692db32be36 |
| Author: Martin Krause <martin.krause@tqs.de> |
| Date: Wed Sep 26 17:55:55 2007 +0200 |
| |
| TQM866M: adjust for doubled flash sector size. |
| |
| Adjust flash map to support the new S29GLxxN (N-Type) Flashes with |
| doubled sector size. |
| |
| Signed-off-by: Martin Krause <martin.krause@tqs.de> |
| |
| commit f8bf90461d9bad2e6fed31fcebaf235f60dd6763 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Sun Oct 14 16:12:29 2007 +0200 |
| |
| [FIX] XUPV2P change command handling |
| and remove code violation |
| |
| commit 636400198228d96983c06657b17f760f5989958e |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Oct 14 00:13:19 2007 +0200 |
| |
| Prepare for 1.3.0-rc3 release |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 68f14f77ca5fe5f9cc025c8cae101671f628309f |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sat Sep 29 13:41:37 2007 +0200 |
| |
| Fix warning differ in signedness in cpu/pxa/mmc.c |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit fc19e36f741e8bc727c0a330170b3b5db90399ef |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sat Oct 13 23:51:14 2007 +0200 |
| |
| Fix warning differ in signedness in board/mpl/vcma9/vcma9.c |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit de74b9eeacccaf0a42e5ecc9ae79a88f7a311296 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sat Oct 13 21:15:39 2007 +0200 |
| |
| Coding Style cleanup. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit e1893815b0999410d7a327589611c7b38e95299e |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Fri Oct 12 15:49:39 2007 +0200 |
| |
| GP3 SSA: enable RTC |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 8002012041f1ff9f997a5727abe5015f70cd2e46 |
| Author: Grzegorz Bernacki <gjb@semihalf.com> |
| Date: Tue Oct 9 13:58:24 2007 +0200 |
| |
| [ads5121] EEPROM support added. |
| |
| Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> |
| |
| commit 7b624ad254b97e5a25dca2304a398b64aeedaffe |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Sat Oct 6 18:55:35 2007 +0200 |
| |
| AVR32: Initialize bi_flash* in board_init_r |
| |
| The ATSTK1000-specific flash driver intializes bi_flashstart, |
| bi_flashsize and bi_flashoffset, but other flash drivers, like the CFI |
| driver, don't. |
| |
| Initialize these in board_init_r instead so that things will still be |
| set up correctly when we switch to the CFI driver. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 2b2a587d6d3076387d22ac740f44044bf46e2cb8 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Fri Oct 5 10:40:54 2007 +0200 |
| |
| tqm5200: Fix CONFIG_CMD_PCI typo in board config file. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 92869195ef8210758d2176230c0a36897afd50ed |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Fri Oct 5 09:46:06 2007 +0200 |
| |
| CM5200: Fix missing null-termination in hostname manipulation code |
| |
| Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit 9add9884b1fddc34ca186e00a2f868ccd5d02d87 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Tue Oct 2 19:09:01 2007 +0200 |
| |
| Fix memtest breakage |
| |
| CFG_MEMTEST_START uses weird magic involving gd, which fails to |
| compile. Use hardcoded values instead (we actually know how much RAM |
| we have on board.) |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 738815c0cc44aa329097f868dc1efc49ede9c5ba |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Oct 2 11:44:46 2007 +0200 |
| |
| ppc4xx: Coding style cleanup |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 87c1833a39e944db66385286fd5e28f9b3fcdd50 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Oct 2 11:44:19 2007 +0200 |
| |
| ppc4xx: lwmon5: Remove watchdog for now, since not fully tested yet |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 2db64784061bfc34f4ba70ef1d2fbe7133b55670 |
| Author: Grzegorz Bernacki <gjb@semihalf.com> |
| Date: Mon Oct 1 09:51:50 2007 +0200 |
| |
| Program EPLD to force full duplex mode for PHY. |
| |
| EPLD forces modes of PHY operation. By default full duplex is turned off. |
| This fix turns it on. |
| |
| Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> |
| |
| commit 785c13477b77dcd2e6c5128fffcdb4e1943f4818 |
| Author: Timo Ketola <timo.ketola@exertus.fi> |
| Date: Mon Sep 24 14:50:32 2007 +0300 |
| |
| Bugfix: Use only one PTD for one endpoint |
| |
| Original isp116x-hcd code prepared multiple PTDs for longer than 16 |
| byte transfers for one endpoint. That is unnecessary because the |
| ISP116x is able to split long data from one PTD into multiple |
| transactions based on the buffer size of the endpoint. It also caused |
| serious problems if the endpoint NAKed some of the transactions. In |
| that case ISP116x wouldn't notice that the other PTDs were for the same |
| endpoint and would try the other PTDs possibly out of order. That would |
| break the whole transfer. |
| |
| This patch makes isp116x_submit_job to use one PTD for one transfer. |
| |
| Signed-off-by: Timo Ketola <timo.ketola@exertus.fi> |
| Signed-off-by: Markus Klotzbuecher <mk@denx.de> |
| |
| commit 86ec86c04326c3913178a7679aa910de071da75d |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Thu Sep 27 23:27:47 2007 +0200 |
| |
| Fix missing DECLARE_GLOBAL_DATA_PTR on CONFIG_LPC2292 in serial |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 3e954beb614b5b190d7f4f4c3b641437a0132e35 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Sep 11 14:12:55 2007 +0200 |
| |
| ppc4xx: lwmon5: Change GPIO 58 to default to low (watchdog test) |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 1487adbdcf9594bb2eb686325a6f9540dad1b70a |
| Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Date: Wed Sep 26 16:35:54 2007 -0500 |
| |
| 85xx io out functions need sync after write. |
| |
| This fixes the mc146818 rtc_read/write functions for 85xx. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| |
| commit 0d38effc6e359e6b1b0c78d66e8bc1a4dc15a2ae |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Sep 25 15:48:05 2007 -0600 |
| |
| Fpga: fix incorrect test of CFG_FPGA_XILINX macro |
| |
| CFG_FPGA_XILINX is a bit value used to test against the value in |
| CONFIG_FPGA. Testing for a value will always return TRUE. I don't |
| think that is the intention in this code. |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 853643d8cf2ca80cb2e25c53ad5dc580abafe166 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Mon Sep 24 00:41:30 2007 +0200 |
| |
| [FIX] change command handling and removing code violation |
| |
| commit f240356507038e5ce55e8a24cb2607e9eae6d10c |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Mon Sep 24 00:36:06 2007 +0200 |
| |
| [FIX] change sets of commands |
| because changing of command handling brings |
| compilation problems |
| |
| commit cb1bc63b75a232571eb69aa2c8aa919321655845 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Mon Sep 24 00:30:42 2007 +0200 |
| |
| [FIX] Email reparation & Copyright |
| Both codes are written by myself without any |
| support from CTU |
| |
| commit 0731cbae6c2feab93b244d83fd6a43f5cc9bf852 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Mon Sep 24 00:25:11 2007 +0200 |
| |
| [PATCH] Change macro name for UartLite |
| because PowerPC 405 can use UartLite as console |
| |
| commit 1c1100d2fcf46b9d11dcf78d6e5aea75e2e8b716 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Mon Sep 24 00:21:19 2007 +0200 |
| |
| [PATCH] Add support for design without interrupt controller |
| Polling timer |
| |
| commit 0731933ec8ec45d02ba89b52df673d526873cdde |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Mon Sep 24 00:19:48 2007 +0200 |
| |
| [FIX] resolve problem with cpu without barrel shifter |
| |
| commit db14d77995ce515b728b178b63f82babe60e3d56 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Mon Sep 24 00:18:46 2007 +0200 |
| |
| [FIX] repair email address |
| |
| commit 481d4328618804add1f818a6c96296121cd0528e |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Mon Sep 24 00:17:42 2007 +0200 |
| |
| [FIX] repair MFSL commands |
| |
| commit b90c045f035c3cc9b5d2edaed6048dfb74e40763 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Mon Sep 24 00:08:37 2007 +0200 |
| |
| synchronizition with mainline |
| |
| commit eda3e1e6619ad0bee94ae4b16c99d88e77e2af13 |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Sun Sep 23 02:42:38 2007 +0900 |
| |
| sh: Add support command of ide with sh |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit d91ea45d15cf8e0987456bd211ffbb650824b6f1 |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Sun Sep 23 02:38:42 2007 +0900 |
| |
| sh: Update Makefile |
| |
| Add support MS7722SE01 to Makefile. |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 6c0bbdccd379f5c8702af9e0765294c2fb7472a6 |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Sun Sep 23 02:31:13 2007 +0900 |
| |
| sh: Add support Renesas sh7722 processor and Hitachi MS7722SE01 board |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 047375bfa4c3052fa50a748da7ff89e9dad3b364 |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Sun Sep 23 02:19:24 2007 +0900 |
| |
| sh: Update MS7750SE01 platform |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 516ad760db3553766267ada01b7d5d727faa4bbd |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Sun Sep 23 02:17:08 2007 +0900 |
| |
| sh: Remove comment out code from include/asm-sh/cpu_sh4.h |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit b02bad128669e567fce87d8df823b06a0144b8db |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Sun Sep 23 02:12:30 2007 +0900 |
| |
| sh: Update core code of SuperH. |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 66dcad3a9a53e0766d90e0084123bd8529522fb0 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Thu Sep 20 00:04:14 2007 +0200 |
| |
| v1.3.0-rc2 |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 135e19bc2773ebca487e9a8371f67e1ba202313a |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Sep 18 21:36:35 2007 +0200 |
| |
| Avoid compiler warning. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 8a783a65851bc7421ab69f442261215e21b8891a |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Sep 18 12:24:57 2007 -0600 |
| |
| Bugfix: remove embedded null (\0) from CFG_BOOTFILE macro in TQM8540_config |
| |
| /bin/bash and /bin/dash (which /bin/sh is linked to on ubuntu) handle embedded |
| nulls in a string differently. For example, the following statement: |
| echo "this is a string\0" > afile |
| Will produce the following with /bin/bash: |
| "this is a string\0" |
| But with /bin/dash, will produce: |
| "this is a string |
| |
| Bug fixed by moving the embedded null out of the makefile and into the |
| config header. Also renamed the macro to avoid usage colision with the same |
| macro used by other board ports. |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit f8d3ca7b6fa322ac57e8e831f07dbeea039a9f35 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Sep 18 17:40:27 2007 +0200 |
| |
| MCC200: fix build warning |
| |
| The MCC200 board config file includes version.h for some customer- |
| specific setting, which causes warnings with "make depend"; build |
| version.h before depend. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit bd86220f58b99d6896198c385fda132f0c980915 |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Tue Sep 18 13:07:54 2007 +0100 |
| |
| Move coloured led API to status_led.h |
| Improve indentation in drivers/at45.c |
| |
| commit e80e585b00fbbab7ad1bf71619741f2c5b029ab7 |
| Author: Eirik Aanonsen <eaa@wprmedical.com> |
| Date: Tue Sep 18 08:47:20 2007 +0200 |
| |
| Update atstk1002 bootargs. |
| |
| Updates to atstk1002 U-Boot header file: |
| - Changed bootargs: |
| * Set the bootargs for at1002 to point to the SD-card partition instead |
| * ... of the boot flash. |
| * Removing the rootfstype since that argument are not needed. |
| |
| Signed-off-by: Eirik Aanonsen <eaa@wprmedical.com> |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit a4f3aab6dfbed6c29367c688bfb8a47eef62c225 |
| Author: Eirik Aanonsen <eaa@wprmedical.com> |
| Date: Wed Sep 12 13:32:37 2007 +0200 |
| |
| Add some comments to clocks in atstk1002.h |
| |
| This patch applies some clarifying comments to how the different |
| clocks are setup according to atstk1002.h Some of the previous |
| comments where stating wrongful information. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 97213f32416ead885deafea86774e912ffd60ad0 |
| Author: David Saada <David.Saada@ecitele.com> |
| Date: Mon Sep 17 17:04:47 2007 +0200 |
| |
| Description: Add NEC's PCI OHCI module ID to the USB OHCI driver |
| |
| Signed-off-by: David Saada <david.saada@ecitele.com> |
| |
| commit 30363e98fa470fbecea5e8bc0f1443352754f303 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Sep 17 08:20:47 2007 +0200 |
| |
| Small whitespace cleanup of OneNAND patch |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit d7e8ce101a4a45ed6ed45739fc2de5f87b13f7f1 |
| Author: Kyungmin Park <kmpark@infradead.org> |
| Date: Mon Sep 10 17:15:14 2007 +0900 |
| |
| OneNAND support (take #2) |
| |
| [PATCH 3/3] OneNAND support (take #2) |
| |
| OneNAND support at U-Boot |
| |
| Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> |
| |
| commit 17aa2800457df0c06b41516f46f126712c196219 |
| Author: Kyungmin Park <kmpark@infradead.org> |
| Date: Mon Sep 10 17:14:34 2007 +0900 |
| |
| OneNAND support (take #2) |
| |
| [PATCH 2/3] OneNAND support (take #2) |
| |
| OneNAND support at U-Boot |
| |
| Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> |
| |
| commit 916527f4809a7bcd811f1f1daf34af184e31dd8c |
| Author: Kyungmin Park <kmpark@infradead.org> |
| Date: Mon Sep 10 17:13:49 2007 +0900 |
| |
| OneNAND support (take #2) |
| |
| [PATCH 1/3] OneNAND support (take #2) |
| |
| OneNAND support at U-Boot |
| |
| Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> |
| |
| commit b49c90df6e7cfcfb8b862b8bbf8448dff5eed9a5 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Sun Sep 16 20:51:57 2007 +0200 |
| |
| [FIX] remove files form repository |
| |
| commit 67c31036acaaaa992fc346cc89db0909a7e733c4 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Sep 16 17:10:04 2007 +0200 |
| |
| TQM8xx[LM]: Fix broken environment alignment. |
| |
| With recent toolchains, the environment sectors were no longer aligned to |
| sector boundaries. The reason was a combination of two bugs: |
| |
| 1) common/environment.c assumed that CONFIG_TQM8xxL would be defined |
| for all TQM8xxL and TQM8xxM boards. But "include/common.h", where |
| this gets defined, is not included here (and cannot be included |
| without causing lots of problems). |
| |
| Added a new #define CFG_USE_PPCENV for all boards which really |
| want to put the environment is a ".ppcenv" section. |
| |
| 2) The linker scripts just include environment.o, silently assuming |
| that the objects in that file are really in the order in which |
| they are coded in the C file, i. e. "environment" first, then |
| "redundand_environment", and "env_size" last. However, current |
| toolchains (GCC-4.x) reorder the objects, causing the environment |
| data not to start on a flash sector boundary: |
| |
| Instead of: we got: |
| |
| 40008000 T environment 40008000 T env_size |
| 4000c000 T redundand_environment 40008004 T redundand_environment |
| 40010000 T env_size 4000c004 T environment |
| |
| Note: this patch fixes just the first part, and cures the alignment |
| problem by making sure that "env_size" gets placed correctly. However, |
| we still have a potential issue because primary and redundant |
| environment sectors are actually swapped, i. e. we have now: |
| |
| 40008000 T redundand_environment |
| 4000c000 T environment |
| 40010000 T env_size |
| |
| This shall be fixed in the next version. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit eb6da8050797c204c9d010548424186c7ce32fc1 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Sep 16 02:39:35 2007 +0200 |
| |
| TQM8xx/FPS8xx: adjust flash partitions for 2.6 ARCH=powerpc kernels |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit cd2d1602c54cc6957bdef3872272a4b264893960 |
| Author: urwithsughosh@gmail.com <urwithsughosh@gmail.com> |
| Date: Mon Sep 10 14:54:56 2007 -0400 |
| |
| Typo fix in tsec.c |
| |
| Fixup for the break statement in wrong place. |
| |
| [Patch by urwithsughosh@gmail.com] |
| Acked-by: Andy Fleming <afleming@freescale.com> |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 5bd7fe9aeb76906371f40b8fd07613f10922e3e7 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Tue Sep 11 17:04:00 2007 +0200 |
| |
| Fix do_div() usage in nand process output |
| |
| Fix usage of do_div() in nand erase|read|write process output. |
| |
| The last patch to nand_util.c introduced do_div() instead of libgcc's |
| implementation. But do_div() returns the quotient in its first |
| macro parameter and not as result. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit c750d2e6692a000a82f29de7bf24e3dc21239161 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Wed Sep 12 12:36:53 2007 +0200 |
| |
| NAND: Add CFG_NAND_QUIET option |
| |
| This config option sets the default for the progress information |
| output behavior that can also be configured through the 'quiet' |
| environment variable. |
| |
| The legacy NAND code does not print the current progress info |
| on the console. So this option is for backward compatibility for |
| units that are in the field and where setting the quiet variable |
| is not an option. With CFG_NAND_QUIET set to '1' the console |
| progress info is turned off. This can still be overwritten |
| through the environment variable. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit dcb88630290d2bcd803386dd4c2be73142994c4f |
| Author: Liew Tsi Chung-r5aahp <Tsi-chung.Liew@freescale.com> |
| Date: Thu Sep 13 16:06:05 2007 -0700 |
| |
| ColdFire: fix build error becasue of bad type of mii_init() |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 314d5b6ce52a4ed19dd295d1364e246c5e605017 |
| Author: Liew Tsi Chung-r5aahp <Tsi-chung.Liew@freescale.com> |
| Date: Thu Sep 13 16:04:05 2007 -0700 |
| |
| ColdFire: Fix build error caused by pixis.c |
| |
| Moved the #include <asm/cache.h> inside the #ifdef CONFIG_FSL_PIXIS. |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit e21659e30660a1377c42af135a6114efe39801d9 |
| Author: Sam Sparks <SSparks@twacs.com> |
| Date: Fri Sep 14 11:14:42 2007 -0600 |
| |
| Update MPC8349ITX*_config to place config.tmp in right place. |
| |
| MPC834ITX*_config does not store config.tmp at the correct locatation, |
| causing MPC8349ITXGP to have the wrong TEXT_BASE. |
| |
| Signed-off-by: Sam Sparks <SSparks@twacs.com> |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 1218abf1b5817a39a82399b4b928b00750575bda |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sat Sep 15 20:48:41 2007 +0200 |
| |
| Fix cases where DECLARE_GLOBAL_DATA_PTR was not declared as global |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 66b3f24d665be678a9dbb125b1e84185400f63b5 |
| Author: Dirk Behme <dirk.behme@googlemail.com> |
| Date: Sat Sep 15 11:55:42 2007 +0200 |
| |
| Make DECLARE_GLOBAL_DATA_PTR global for DaVinci |
| |
| As discussed in [1], DECLARE_GLOBAL_DATA_PTR has to be global and not |
| function local. |
| |
| Signed-off-by: Dirk Behme <dirk.behme@gmail.com> |
| |
| [1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/31805 |
| |
| commit 991b089d1ce5ad945725e3657a8f106dfa02a38e |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Sat Sep 15 00:03:35 2007 +0200 |
| |
| Synchronize with U-BOOT mainline |
| |
| commit d7fee32b7e61fe11c64e371cde79faa4768e8350 |
| Author: Sam Sparks <SSparks@twacs.com> |
| Date: Fri Sep 14 11:14:42 2007 -0600 |
| |
| Update MPC8349ITX*_config to place config.tmp in right place. |
| |
| MPC834ITX*_config does not store config.tmp at the correct locatation, |
| causing MPC8349ITXGP to have the wrong TEXT_BASE. |
| |
| Signed-off-by: Sam Sparks <SSparks@twacs.com> |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 6e7b7b6ea1b6d04dbe96242eb6a0c1c664c98e8c |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Thu Sep 13 18:21:48 2007 +0200 |
| |
| cm5200: Fix a typo introduced by afaac86fe2948ac84cd9a12bbed883b3c683e7d9 |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit e1f601b572db5de9aa81a0b77c68a86994fe24c4 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Thu Sep 13 16:33:59 2007 +0200 |
| |
| tqm5200: Restore customary env. variable boot commands for powerpc kernels |
| |
| - update default definitions of kernel_addr and fdt_addr env. variables |
| - make arch/powerpc booting the default scenario |
| - update MTD partition layout to match the above |
| |
| Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit f34024d4a328e6edd906456da98d2c537155c4f7 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Sep 12 00:48:57 2007 +0200 |
| |
| Fix memory corruption problem on STX GP3 SSA Board. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit d94c79e47011af5e8dd10ed6163c09b4cfc743cc |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Tue Sep 11 15:35:01 2007 +0100 |
| |
| Final tidy |
| |
| commit 38ad82da0c1180ecdeb212a8f4245e945bcc546e |
| Author: Grzegorz Bernacki <gjb@semihalf.com> |
| Date: Tue Sep 11 15:42:11 2007 +0200 |
| |
| [GP3SSA] Add define CONFIG_MPC85XX_PCI2 in config file to allow u-boot to |
| scan on second pci bus. |
| |
| Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> |
| |
| commit 6c2f4f388e8181655ea8b69343ea00b68aa6e8d0 |
| Author: Grzegorz Bernacki <gjb@semihalf.com> |
| Date: Tue Sep 11 12:57:52 2007 +0200 |
| |
| [ppc4xx] Individual handling of sdram.c for bamboo_nand build |
| |
| Bamboo has a file sdram.c which needs special treatment when building in |
| separate directory. It has to be linked to build directory otherwise it is |
| not seen. |
| |
| Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> |
| |
| commit d45963854eff39d575124d859419bb4953ce2c87 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Tue Sep 11 00:37:04 2007 +0200 |
| |
| [FIX] Microblaze ML401 - repare FLASH handling |
| |
| commit 38c1ef728d19950414a8ab1ccfc53767848fa346 |
| Author: Sean MCGOOGAN <sean.mcgoogan@st.com> |
| Date: Mon Sep 10 16:55:59 2007 +0100 |
| |
| Allocate CPU Architecture Code for STMicroelectronics' ST200. |
| |
| Signed-off-by: Sean McGoogan <Sean.McGoogan@st.com> |
| --------------------------------------------------- |
| |
| commit 754bac48156f8958d8f6a53a51eda88ab5758929 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Mon Sep 10 20:42:31 2007 +0200 |
| |
| Update version to match current state. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 7a888d6b3c32a126dbb504ef146bb4c26574ca7b |
| Author: Grzegorz Bernacki <gjb@semihalf.com> |
| Date: Mon Sep 10 17:39:08 2007 +0200 |
| |
| [MPC512x] Streamline frame handling in the FEC driver |
| |
| - convert frame size settings to be derived from a single base |
| - set frame size to the recommended default value |
| |
| Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> |
| |
| commit e251e00d0db4b36d1d2b7e38fec43a7296b529a2 |
| Author: Kyungmin Park <kmpark@infradead.org> |
| Date: Mon Sep 10 11:34:00 2007 +0900 |
| |
| Remove compiler warning: target CPU does not support interworking |
| |
| Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> |
| |
| commit 1d9e31e04911a6bb7cc66dd91132c699101c32e2 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Sep 9 21:21:33 2007 +0200 |
| |
| Fix compile error in spc1920 config. |
| |
| Signed-off-by: Markus Klotzbücher <mk@denx.de> |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit a7d7eca791a37f452c9da10fef4b31dd7aa9a622 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Fri Sep 7 09:25:07 2007 -0600 |
| |
| Bugfix: make bootm+libfdt compile on boards with no flash |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 6efc1fc0b63e55f94c5bc61d8dd23c918e3bc778 |
| Author: Grzegorz Bernacki <gjb@semihalf.com> |
| Date: Fri Sep 7 18:35:37 2007 +0200 |
| |
| [PPC440SPe] PCIe environment settings for Katmai and Yucca |
| |
| - 'pciconfighost' is set by default in order to be able to scan bridges |
| behind the primary host/PCIe |
| |
| - 'pciscandelay' env variable is recognized to allow for user-controlled |
| delay before the PCIe bus enumeration; some peripheral devices require a |
| significant delay before they can be scanned (e.g. LSI8408E); without the |
| delay they are not detected |
| |
| Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> |
| |
| commit 7f1913938984ef6c6a46cb53e003719196d9c5de |
| Author: Grzegorz Bernacki <gjb@semihalf.com> |
| Date: Fri Sep 7 18:20:23 2007 +0200 |
| |
| [PPC440SPe] Improve PCIe configuration space access |
| |
| - correct configuration space mapping |
| - correct bus numbering |
| - better access to config space |
| |
| Prior to this patch, the 440SPe host/PCIe bridge was able to configure only the |
| first device on the first bus. We now allow to configure up to 16 buses; |
| also, scanning for devices behind the PCIe-PCIe bridge is supported, so |
| peripheral devices farther in hierarchy can be identified. |
| |
| Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> |
| |
| commit 15ee4734e4e08003d73d9ead3ca80e2a0672e427 |
| Author: Grzegorz Bernacki <gjb@semihalf.com> |
| Date: Fri Sep 7 17:46:18 2007 +0200 |
| |
| [PPC440SPe] Convert machine check exceptions handling |
| |
| Convert using fixup mechanism to suppressing MCK for the duration of config |
| read/write transaction: while fixups work fine with the case of a precise |
| exception, we identified a major drawback with this approach when there's |
| an imprecise case. In this scenario there is the following race condition: |
| the fixup is (by design) set to catch the instruction following the one |
| actually causing the exception; if an interrupt (e.g. decrementer) happens |
| between those two instructions, the ISR code is executed before the fixup |
| handler the machine check is no longer protected by the fixup handler as it |
| appears as within the ISR code. In consequence the fixup approach is being |
| phased out and replaced with explicit suppressing of MCK during a PCIe |
| config read/write cycle. |
| |
| Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> |
| |
| commit ff7640c9ead8806b5d827f2b29f9cb2632add729 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Fri Sep 7 17:43:36 2007 +0200 |
| |
| Fix typo in MAKEALL script. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 08e2e5fcd2e06670b62e1680a3934c0e55c72810 |
| Author: Grzegorz Bernacki <gjb@semihalf.com> |
| Date: Fri Sep 7 17:09:21 2007 +0200 |
| |
| [MPC512x] Proper handling of larger frames in the FEC driver |
| |
| When frame larger than local RX buffer is received, it is split and handled |
| by two buffer descriptors. Prior to this patch the FEC driver discarded |
| contents of a buffer descriptor without the 'LAST' bit set, so the first |
| part of the frame was lost in case of larger frames. This fix allows to |
| safely combine the two pieces into the whole frame. |
| |
| Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> |
| |
| commit 8d17979d0359492a822a0a409d26e3a3549b4cd4 |
| Author: Rafal Jaworowski <raj@semihalf.com> |
| Date: Fri Sep 7 17:05:36 2007 +0200 |
| |
| [MPC512x] Correct fixup relocation |
| |
| Signed-off-by: Rafal Jaworowski <raj@semihalf.com> |
| |
| commit a89cbbd27a60e6740772000fd0688ffba1c2576a |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Fri Sep 7 01:21:25 2007 +0200 |
| |
| Update CHANGELOG, minor coding style cleanup. |
| |
| commit 5e5803e119de3bebd76fc9a57baac0b5aeccc8a3 |
| Author: stefano babic <sbabic@denx.de> |
| Date: Thu Aug 30 23:01:49 2007 +0200 |
| |
| PXA270: Added support for TrizepsIV board. |
| |
| This patch add support for the Trizeps IV module (520Mhz). |
| |
| Signed-off-by: Stefano Babic <sbabic@denx.de> |
| |
| commit 80172c6181c912fbb34ea3ba0c22b232b419b47f |
| Author: stefano babic <sbabic@denx.de> |
| Date: Thu Aug 30 22:57:04 2007 +0200 |
| |
| PXA270: Add support for multiple serial ports. |
| |
| This patch adds support for multiple serial ports to the PXA target. |
| FFUART, BTUART and STUART are supported. |
| |
| Signed-off-by: Stefano Babic <sbabic@denx.de> |
| |
| commit 28bb3f72c687ac6b2eb076b01dd21a5fd657d45e |
| Author: stefano babic <sbabic@denx.de> |
| Date: Thu Aug 30 22:48:47 2007 +0200 |
| |
| PXA270: fix compile issue (invalid lvalue) |
| |
| Code is broken for PXA270 due to "invalid lvalue in assignment". |
| |
| This patch fix it in pxa-regs.h |
| |
| Signed-off-by: Stefano Babic <sbabic@denx.de> |
| |
| commit 1d2ca446e1a731df420206d04fe278c27ea6b8e8 |
| Author: Jason Jin <Jason.jin@freescale.com> |
| Date: Thu Aug 30 18:19:05 2007 +0800 |
| |
| Add BUILD_DIR support for bios emulator. |
| |
| Signed-off-by: Jason Jin <Jason.jin@freescale.com> |
| |
| commit b4d8a55145442f136982634862341a3e02002bda |
| Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| Date: Fri Aug 31 14:41:51 2007 +0900 |
| |
| [MIPS] Remove inline asm string functions |
| |
| Stop using inline string functions on MIPS as other ARCHs do so, |
| since the optimized inline asm versions are not small. |
| |
| This change is triggered by a following MIPS build error: |
| common/libcommon.a(exports.o)(.text+0xdc): In function `jumptable_init': |
| common/exports.c:32: undefined reference to `strcmp' |
| make: *** [u-boot] Error 1 |
| |
| Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| |
| commit 8ea2c4e54833deaebc24c3ca6b7f21353c25b0f5 |
| Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| Date: Fri Aug 31 14:41:45 2007 +0900 |
| |
| [MIPS] Update asm string header |
| |
| This patches contains several bugfixes and cleanups in the latest upstream: |
| |
| - Don't include linux/config.h |
| - Remove buggy inline version of memscan. |
| - Merge with Linux 2.6.11-rc3. |
| - Fix undefined reference to strcpy in binfmt_misc caused by gcc 3.4. |
| - Goodbye mips64. 31704 lines of code bite the dust. |
| - Replace extern inline with static inline. |
| - Fix return value of strncpy. |
| - Remove a bunch more "$1" clobbers. |
| |
| Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| |
| commit 5b729fb3bd98f49855d6bfc657c3fbae95f2adc2 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Tue Sep 4 17:31:22 2007 +0200 |
| |
| Fix do_bootm_linux() so that multi-file images with FDT blob boot. |
| |
| Fix incorrect blob address calculation in do_bootm_linux() that prevents |
| booting the kernel from a multi-file image (kernel + initrd + blob). |
| |
| Also, make minor updates to the U-Boot's output and to the coding style. |
| |
| Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit 041a2554ad619e80dce520c1a33210affcb6a3f2 |
| Author: Gary Jennejohn <gary.jennejohn@freenet.de> |
| Date: Fri Aug 31 14:29:04 2007 +0200 |
| |
| Add support for Sil680 IDE controller. |
| |
| o add drivers/sil680.c to support the Sil680 IDE-controller. |
| o drivers/Makefile: add sil680.o. |
| |
| Signed-off-by: Gary Jennejohn <garyj@denx.de> |
| |
| commit e79021223bc339df655e360645a52c457a74b067 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Thu Sep 6 09:47:40 2007 -0600 |
| |
| bootm/fdt: Only process the fdt if an fdt address was provided |
| |
| Boards with CONFIG_OF_LIBFDT enabled are not able to boot old-style |
| kernels using the board info structure (instead of passing a device tree) |
| This change allows the old style booting to be used if the fdt argument |
| was not passed to 'bootm'. |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| Acked-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit cf2817a84c2e9bea2c5dfc084bce2f2d2563ac43 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Thu Sep 6 09:46:23 2007 -0600 |
| |
| Migrate 5xxx boards from CONFIG_OF_FLAT_TREE to CONFIG_OF_LIBFDT |
| |
| Affects boards: icecube (lite5200), jupiter, motionpro, tqm5200 |
| |
| Tested on: lite5200b |
| |
| Note: the fixup functions have not been moved to a common place. This |
| patch is targeted for immediate merging as in solves a build issue, but |
| the final name/location of the fixups is still subject to debate. I |
| propose to merge this now, and move the fixups in the next merge window |
| to be usable by all targets. |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 41bb76e941929f54a73206fb132f7a4c275543a3 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Thu Sep 6 09:46:17 2007 -0600 |
| |
| libfdt: add convenience function fdt_find_and_setprop() |
| |
| Given the path to a node, fdt_find_and_setprop() allows a property value |
| to be set directly. |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 80767a6cead9990d9e77e62be947843c2c72f469 |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Wed Sep 5 16:04:41 2007 +0100 |
| |
| Changed API name to coloured_led.h |
| Removed code using deprecated ifdef CONFIG_BOOTBINFUNC |
| Tidied other cpu/arm920t/start.S code |
| |
| commit 56a9270521baaa00e12639a978302a67f61ef060 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Aug 30 16:18:18 2007 -0500 |
| |
| Fix ULI RTC support on MPC8544 DS |
| |
| The RTC on the M1575 ULI chipset requires a dummy read before |
| we are able to talk to the RTC. We accomplish this by adding a |
| second memory region to the PHB the ULI is on and read from it. |
| |
| The second region is added to maintain compatiabilty with Linux's |
| view of the PCI memory map. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit f75e89e9b5714db2b0e80074071dfbdd6f59488a |
| Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Date: Thu Aug 30 01:58:48 2007 -0500 |
| |
| ft_board_setup update 85xx/86xx of pci/pcie bus-range property. |
| |
| pcie is now differentiated from pci. Add 8641 bus-range updates. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| |
| commit 9f5c3d3720e777a572dcdc8af2008b44c7243885 |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Tue Sep 4 16:18:38 2007 +0100 |
| |
| Add coloured led interface for ARM boards. |
| Use it in cpu/arm920t/start.S to indicate U-Boot code has been entered. |
| |
| commit 7462fe0d5a9d40cde083fb1a3cd73911996b5ecb |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Tue Sep 4 14:49:28 2007 +0100 |
| |
| Move include/led.h to board/at91rm9200dk |
| |
| commit 6e4bf9b24e57c15abc6542e685d06380bc64af27 |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Tue Sep 4 14:25:51 2007 +0100 |
| |
| Ran Lindent on drivers/at45.c |
| |
| commit 557ab89d294f08dd532f21d19861b40093200a33 |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Tue Sep 4 14:23:50 2007 +0100 |
| |
| Rename CONFIG_CMD_MUX to CONFIG_CMD_AT91_SPIMUX |
| |
| commit 81b73dec16fd1227369a191e725e10044a9d56b8 |
| Author: Gary Jennejohn <garyj@denx.de> |
| Date: Fri Aug 31 15:21:46 2007 +0200 |
| |
| ppc4xx: (Re-)Enable CONFIG_PCI_PNP on AMCC 440EPx Sequoia |
| |
| The 440EPx has a problem when the PCI_CACHE_LINE_SIZE register is |
| set to non-zero, because it doesn't support MRM (memory-read- |
| multiple) correctly. We now added the possibility to configure |
| this register in the board config file, so that the default value |
| of 8 can be overridden. |
| |
| Here the details of this patch: |
| |
| o drivers_pci_auto.c: introduce CFG_PCI_CACHE_LINE_SIZE to allow |
| board-specific settings. As an example the sequoia board requires 0. |
| Idea from Stefan Roese <sr@denx.de>. |
| o board/amcc/sequoia/init.S: add a TLB mapping at 0xE8000000 for the |
| PCI IO-space. Obtained from Stefan Roese <sr@denx.de>. |
| o include/configs/sequoia.h: turn CONFIG_PCI_PNP back on and set |
| CFG_PCI_CACHE_LINE_SIZE to 0. |
| |
| Signed-off-by: Gary Jennejohn <garyj@denx.de> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 60174746c668b309378a91488dded898e9553eae |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Fri Aug 31 10:01:51 2007 +0200 |
| |
| Fix TFTP OACK code for short packets. |
| |
| The old code had a loop limit overflow bug which caused a semi- |
| infinite loop for small packets, because in "i<len-8", "i" was signed, |
| but "len" was unsigned, and "len-8" became a huge number for small |
| values of "len". |
| |
| This is a workaround which replaces broken commit 8f1bc284. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 696dd1307cd8e73a10e9bb3c51731bfd6f837bee |
| Author: Hans-Christian Egtvedt <hcegtvedt@atmel.com> |
| Date: Thu Aug 30 15:03:05 2007 +0200 |
| |
| Reduce BOOTDELAY variable to 1 second by default for STK1002 |
| |
| Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com> |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit c88b6e1cbf9a8ae2a34fb602f78a1bf4e6692b6a |
| Author: Hans-Christian Egtvedt <hcegtvedt@atmel.com> |
| Date: Thu Aug 30 15:03:04 2007 +0200 |
| |
| Remove double quotation marks around MAC address for STK1002 |
| |
| Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com> |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit ff13ac8c7bbebb238e339592de765c546dba1073 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Thu Aug 30 14:42:15 2007 +0200 |
| |
| Backout commit 8f1bc284 as it causes TFTP to fail. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 1900fbf255acba8b94fb442a16408ea85a1d46a6 |
| Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Date: Thu Aug 30 02:26:17 2007 -0500 |
| |
| Revert "Fix MPC8544DS PCIe3 scsi." |
| |
| This reverts commit 9468e680. |
| Commit 16e23c3f5da removing allocation of PCSRBAR is sufficient. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| |
| commit 8f1bc28408ded213418d9bc0780c7d8fb8a03774 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Wed Aug 29 18:26:24 2007 -0600 |
| |
| tftp: don't implicity trust the format of recevied packets |
| |
| The TFTP OACK code trusts that the incoming packet is formated as |
| ASCII text and can be processed by string functions. It also has a |
| loop limit overflow bug where if the packet length is less than 8, it |
| ends up looping over *all* of memory to find the 'blksize' string. |
| |
| This patch solves the problem by forcing the packet to be null |
| terminated and using strstr() to search for the sub string. |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 04625764cc93ce8a61625ac19d7fe2a2ceee8143 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Aug 29 16:31:18 2007 +0200 |
| |
| ppc4xx: Change lwmon5 default environment to support Linux RTC |
| |
| The Linux PCF8563 RTC driver doesn't do autoprobing, so we need |
| to supply the RTC I2C address as bootline parameter. This patch |
| adds support for this rtc probing parameter to the bootargs: |
| |
| "rtc-pcf8563.probe=0,0x51" |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 2602a5c40ae37ab965a4e240854fdaffb51328a4 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Wed Aug 29 09:06:05 2007 -0500 |
| |
| sbc8641: remove unused OF_FLAT_TREE_MAX_SIZE |
| |
| this had slipped through the cracks, since the sbc board was added |
| after I wrote the original patch to remove all these symbols, and |
| before it was merged. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit c5bded3c88e48ae648a75d357dc81a8255fa81f1 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Aug 29 14:05:30 2007 +0200 |
| |
| Add mii_init() prototype |
| |
| to get rid of a *lot* of compiler warnings. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 2d1f23aa1e74e4a8f8ffa67f246eb98c522dfd7f |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Aug 29 13:35:03 2007 +0200 |
| |
| Disable network support on cmi_mpc5xx board |
| |
| ..because it caused compiler errors and there seems to be no |
| board maintainer to take care of this. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 9468e6804b7e25b0f6f52e53f47bce3175400a16 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Mon Aug 20 09:44:00 2007 -0500 |
| |
| Fix MPC8544DS PCIe3 scsi. |
| |
| <ed.swarthout@freescale.com> |
| |
| The problem is pciauto_setup_device() getting called from fsl_pci_init.c |
| is allocating memory space it doesn't need. |
| |
| Signed-off-by: Ed Swarthout <ed.swarthout@freescale.com> |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 4bf4abb8a4e9955556b120a1aafa30c03e74032a |
| Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Date: Tue Aug 21 09:38:59 2007 -0500 |
| |
| 8548cds fixes |
| |
| Restore CONFIG_EXTRA_ENV_SETTINGS definition which contains the |
| correct consoledev needed for linux boot. |
| Standardize on fdt{file,addr} var to hold dtb file name. |
| |
| Set PCI inbound memory region from CFG_MEMORY_{BUS,PHYS}. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| |
| commit 7a1ac419fa0d2d23ddd08bd61d16896a9f33c933 |
| Author: Haiying Wang <Haiying.Wang@freescale.com> |
| Date: Thu Aug 23 15:20:54 2007 -0400 |
| |
| Enable L2 cache for MPC8568MDS board |
| |
| The L2 cache size is 512KB for 8568, print out the correct informaiton. |
| |
| Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> |
| |
| commit 94c47fdaf14cb29fa3fb4d4da2efdd96c803b46b |
| Author: Jason Jin <Jason.jin@freescale.com> |
| Date: Wed Aug 22 17:54:49 2007 +0800 |
| |
| Remove the bios emulator binary files from MAI board |
| |
| Signed-off-by: Jason Jin <Jason.jin@freescale.com> |
| |
| commit 7608d75f9c87c9eb5b3a43219d0506d3e979a13f |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Tue Aug 21 17:00:17 2007 -0500 |
| |
| support board vendor-common makefiles |
| |
| if a board/$(VENDOR)/common/Makefile exists, build it. |
| |
| also add the first such case, board/freescale/common/Makefile, to |
| handle building board-shared EEPROM, PIXIS, and MDS-PIB code, as |
| dictated by board configuration. |
| |
| thusly get rid of alternate build dir errors such as: |
| |
| FATAL: can't create /work/wd/tmp/u-boot-ppc/board/freescale/mpc8360emds/../common/pq-mds-pib.o: No such file or directory |
| |
| by putting the common/ mkdir command in its proper place (the common |
| Makefile). Common bits from existing individual board Makefiles have |
| been removed. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit ef8f20752712dc1cdbd86f47e3bd6e35f81c83fd |
| Author: stefano babic <sbabic@denx.de> |
| Date: Tue Aug 21 15:52:33 2007 +0200 |
| |
| Fix: TFTP is not working on little endian systems |
| |
| TFTP does not work anymore after multicast tftp |
| patch was applied on little endian systems. |
| This patch fix it. |
| |
| Signed-off-by: Stefano Babic <sbabic@denx.de> |
| |
| commit 5f470948570526e9186f053a3003da7719604e90 |
| Author: stefano babic <sbabic@denx.de> |
| Date: Tue Aug 21 15:50:33 2007 +0200 |
| |
| Fix MAC address setting in DM9000 driver. |
| |
| The logic to check if there is a correct MAC address in the DM9000 |
| EEPROM, added in the last patch, is wrong. Now the MAC address is |
| always taken from the environment, even if a suitable MAC is present |
| in the EEPROM. |
| |
| Signed-off-by: Stefano Babic <sbabic@denx.de> |
| |
| commit 4a8527ef086ec7c89f40674ef024ae6f988a614a |
| Author: Martin Krause <martin.krause@tqs.de> |
| Date: Tue Aug 21 12:40:34 2007 +0200 |
| |
| MPC5xxx: fix some compiler warnings in USB code |
| |
| Fix the following warnings: |
| - usb.c:xx: warning: function declaration isn't a prototype |
| - usb_ohci.c:xxx: warning: passing argument 1 of '__fswab32' makes integer |
| from pointer wihtout a cast |
| |
| Signed-off-by: Martin Krause <martin.krase@tqs.de> |
| |
| commit 16e23c3f5dab6937f5109365416808c7f15c122b |
| Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Date: Mon Aug 20 23:55:33 2007 -0500 |
| |
| fsl_pci_init - Remove self PCSRBAR allocation |
| |
| CPU physical address space was being wasted by allocating a |
| PCSRBAR PCI inbound region to it's memory space. |
| |
| As a rule, PCSRBAR should be left alone since it does not affect |
| transactions from self and other masters may have changed it. |
| |
| Signed-off-by: Ed Swarthout <ed.swarthout@freescale.com> |
| |
| commit 0e700ce03a23bb1921149bc77008ace7103d5289 |
| Author: Martin Krause <martin.krause@tqs.de> |
| Date: Mon Aug 20 13:56:47 2007 +0200 |
| |
| Fix compiler warning in include/s3c2410.h |
| |
| This patch fixes the "type qualifiers ignored on fuction return tpye" |
| warning for include/s3c2410.h |
| |
| Signed-off-by: Martin Krause <martin.krause@tqs.de> |
| |
| commit 9bb8b209ed2058a5756ecbeb544c067e44a42aea |
| Author: Dirk Behme <dirk.behme@googlemail.com> |
| Date: Mon Aug 20 07:09:05 2007 +0200 |
| |
| Fix compilation error for omap2420h4_config. |
| |
| omap2420h4 switched to cfi, so remove old (already disabled) flash.c |
| and flash_probe() calls in env_flash.c. |
| |
| Signed-off-by: Dirk Behme <dirk.behme@gmail.com> |
| |
| commit 3bb342fc85d79dbb6b8c2039e7cdcddc82b8d90f |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Fri Aug 10 14:34:14 2007 -0500 |
| |
| fdt: remove unused OF_FLAT_TREE_MAX_SIZE references |
| |
| and make some minor corrections to the FDT part of the README. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 6af2eeb1e99c2dcc584d4c5ab7fcae30a325f4de |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Aug 29 01:32:05 2007 +0200 |
| |
| Minor coding style cleanup. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit a861558c65f65f1cf1302f3a35e9db7686b9e1a3 |
| Author: Heiko Schocher <hs@pollux.denx.de> |
| Date: Tue Aug 28 17:40:33 2007 +0200 |
| |
| [UC101] Fix: if no CF in the board, U-Boot resets sometimes. |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit f98984cb194bb34dbe1db9429d3b51133af30d07 |
| Author: Heiko Schocher <hs@pollux.denx.de> |
| Date: Tue Aug 28 17:39:14 2007 +0200 |
| |
| IDE: - make ide_inb () and ide_outb () "weak", so boards can |
| define there own I/O functions. |
| (Needed for the pcs440ep board). |
| - The default I/O Functions are again 8 Bit accesses. |
| - Added CONFIG_CMD_IDE for the pcs440ep Board. |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit 2c05fd125744981e5f2828d24e66ccc20a77d25d |
| Author: Semih Hazar <semih.hazar@indefia.com> |
| Date: Mon Aug 20 19:00:01 2007 +0300 |
| |
| AVR32: Change prototype of memset |
| |
| Signed-off-by: Semih Hazar <semih.hazar@indefia.com> |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 9c02defc29b57945b600714cf61ddfd02b02fb14 |
| Author: Yuri Tikhonov <yur@emcraft.com> |
| Date: Sat Aug 25 05:07:16 2007 +0200 |
| |
| POST: limit memory test area to not touch global data anymore |
| |
| As experienced on lwmon5, on some boards the POST memory test can |
| corrupt the global data buffer (bd). This patch fixes this issue |
| by checking and limiting this area. |
| |
| Signed-off-by: Yuri Tikhonov <yur@emcraft.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 75e1a84d483e36be10e206e539b028c4889e1158 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Aug 24 15:41:42 2007 +0200 |
| |
| ppc4xx: Add RTC POST test to lwmon5 board configuration |
| |
| Since this RTC POST test is taking quite a while to complete |
| it's only initiated upon special keypress same as the complete |
| memory POST. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit d7bfa620037a6d2210159387571bdf93aa32c162 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Aug 24 15:19:10 2007 +0200 |
| |
| ppc4xx: Change GPIO signal for watchdog triggering on lwmon5 |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit c25dd8fc25e9ca3695db996a257d9ba4dab414db |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Aug 23 11:02:37 2007 +0200 |
| |
| ppc4xx: Add support for 2nd I2C EEPROM on lwmon5 board |
| |
| This patch adds support for the 2nd EEPROM (AT24C128) on the lwmon5 |
| board. Now the "eeprom" command can be used to read/write from/to this |
| device. Additionally a new command was added "eepromwp" to en-/disable |
| the write-protect of this 2nd EEPROM. |
| |
| The 1st EEPROM is not affected by this write-protect command. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit c64fb30e4c5976007d56fc1789c7a0666082b536 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Aug 22 08:56:09 2007 +0200 |
| |
| ppc4xx: Remove unused option CFG_INIT_RAM_OCM |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 3ad63878737a5a2b1e60825bf0a7d601d7a695e7 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Aug 21 16:27:57 2007 +0200 |
| |
| ppc4xx: Add matrix kbd support to lwmon5 board (440EPx based) |
| |
| This patch adds support for the matrix keyboard on the lwmon5 board. |
| Since the implementation in the dsPCI is kind of compatible with the |
| "old" lwmon board, most of the code is copied from the lwmon |
| board directory. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 3e66c078003607a7d1d214c15a5f262bc1b4032f |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Aug 19 10:27:34 2007 +0200 |
| |
| Fix some build errors. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 05675735ef77dc23b5e0eb782bad1ff477b55e86 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sat Aug 18 22:00:38 2007 +0200 |
| |
| Update CHANGELOG. |
| |
| commit 79f240f7ecc0506b43ac50d1ea405ff6540d4d57 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Thu Aug 16 22:52:39 2007 -0500 |
| |
| lib_ppc: make board_add_ram_info weak |
| |
| platforms wishing to display RAM diagnostics in addition to size, |
| can do so, on one line, in their own board_add_ram_info() |
| implementation. |
| |
| this consequently eliminates CONFIG_ADD_RAM_INFO. |
| |
| Thanks to Stefan for the hint. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 815b5bd5b18569917c3e04b9757511e6ed23b9f6 |
| Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| Date: Fri Aug 17 12:43:44 2007 +0900 |
| |
| PCI_READ_VIA_DWORD_OP: Fix *val uninitialized bug |
| |
| This patch has been sent on: |
| - 6 Jun 2007 |
| |
| Many users of PCI config read routines tend to ignore the function |
| ret value, and are only concerned about the contents of *val. Based |
| on this, pci_hose_read_config_{byte,word}_via_dword should initialize |
| the *val on dword read error. |
| |
| Without this fix, for example, we'll go on scanning bus with vendor or |
| header_type uninitialized. This brings many unnecessary config trials. |
| |
| Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| |
| commit 26667b7fa05a8bf2fc65fb9f3230b02b1a10c367 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Aug 18 14:37:52 2007 +0200 |
| |
| ColdFire: Fix some remaining problems with CFG_CMD_ |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 8280f6a1c43247616b68224675188e5ccd124650 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Aug 18 14:33:02 2007 +0200 |
| |
| Coding style cleanup |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 4a442d3186b31893b4f77c6e82f63c4517a5224b |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Aug 16 19:23:50 2007 -0500 |
| |
| ColdFire: Add M5235EVB Platform for MCF523x |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 4cc1cd5941827a04cf5c51a07fcc42e8945894aa |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Fri Aug 17 09:30:00 2007 -0500 |
| |
| mpc83xx: fix typo in DDR2 programming |
| |
| introduced in the implement board_add_ram_info patch as I was cleaning out the |
| magic numbers. sorry. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit e58fe95784d2514fc9c21028dc59f2b319a35d80 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Thu Aug 16 22:53:09 2007 -0500 |
| |
| mpc83xx: move freescale boards to boards/freescale |
| |
| includes build fixes. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 5aa4ad8d8e7e9468219990c7875d5fdc9e962f47 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Thu Aug 16 22:52:59 2007 -0500 |
| |
| mpc83xx: suppress unused variable 'val8' warning |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit bbea46f76f767b919070b4829bf34c86bd223248 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Thu Aug 16 22:52:48 2007 -0500 |
| |
| mpc83xx: implement board_add_ram_info |
| |
| add board_add_ram_info, to make memory diagnostic output more |
| consistent. u-boot banner output now looks like: |
| |
| DRAM: 256 MB (DDR1, 64-bit, ECC on) |
| |
| and for boards with SDRAM on the local bus, a line such as this is |
| added: |
| |
| SDRAM: 64 MB (local bus) |
| |
| also replaced some magic numbers with their equivalent define names. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 14778585d1389d86d5846efec29e5fce892680ce |
| Author: Tony Li <tony.li@freescale.com> |
| Date: Fri Aug 17 10:35:59 2007 +0800 |
| |
| mpc83xx: Split PIB init code from pci.c and add Qoc3 ATM card support |
| |
| The patch split the PIB init code from pci.c to a single file board/freescale/common/pq-mds-pib.c |
| And add Qoc3 ATM card support for MPC8360EMDS and MPC832XEMDS board. |
| |
| Signed-off-by Tony Li <tony.li@freescale.com> |
| |
| commit 8ae158cd87a4a25722b27835261b6ff0fa2aa6a7 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Aug 16 15:05:11 2007 -0500 |
| |
| ColdFire: Add M54455EVB for MCF5445x |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit a1436a842654a8d3927d082a8ae9ee0a10da62d7 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Aug 16 13:20:50 2007 -0500 |
| |
| ColdFire: Add M5253EVBE platform for MCF52x2 |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit a605aacd8324094199402816cc6d9124aba57b8d |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Aug 16 05:04:31 2007 -0500 |
| |
| ColdFire: Add M5249EVB platform for MCF52x2 |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit f28e1bd9daa6de5eb33ae4822bda6b008ccb4e9e |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Wed Aug 15 20:32:06 2007 -0500 |
| |
| ColdFire: Update Freescale MCF52x2 platforms |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 870470dbf6f4bb9864e0d97aeedbc17c167c6d1c |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Wed Aug 15 19:55:10 2007 -0500 |
| |
| ColdFire: Update EB+MCF-EV123 platform |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit aa93d859d9b1fcd8eea52d51b06e86c38f72111b |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Wed Aug 15 19:46:38 2007 -0500 |
| |
| ColdFire: update TASREG platform for MCF52x2 |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit a9505510bf56a9b5558248dd8b73ec9d9a1556a2 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Wed Aug 15 19:45:51 2007 -0500 |
| |
| ColdFire: update r5200 platform for MCF52x2 |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 6cfd3c7bc813fb317ab7c0781f0d1874b1c0877c |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Wed Aug 15 19:43:20 2007 -0500 |
| |
| ColdFire: idmr platform MCF52x2 update |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 6706424d0bb851fb52af00cd1c3301e91ee7f2b0 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Wed Aug 15 19:41:06 2007 -0500 |
| |
| ColdFire: cobra5272 platform for MCF52x2 update |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 56115665b4a64c10c01440c57749b265e0908fa4 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Wed Aug 15 19:38:15 2007 -0500 |
| |
| ColdFire: MCF52x2 Header files update |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 83ec20bc4380eebddfde45da6e3a69a92d4db21d |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Wed Aug 15 19:21:21 2007 -0500 |
| |
| ColdFire: MCF52x2 update |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit f52e78304dcc0ac459c0ea1fa5be275c7d1642cf |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Wed Aug 15 18:46:11 2007 -0500 |
| |
| ColdFire: MCF5329 update cache |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 7171977fb8fd77cfb6676953fa9a05789c450513 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Wed Aug 15 15:40:20 2007 -0500 |
| |
| ColdFire: MCF5329 header file clean up |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit ab77bc547ba561c25ea34457ed17aa0b2f7c2723 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Wed Aug 15 15:39:17 2007 -0500 |
| |
| ColdFire: MCF5329 Update and cleanup |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 10327dc5541f947c0cf7e31fef86c4706169607a |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Thu Aug 16 16:35:02 2007 -0500 |
| |
| Add CONFIG_HAS_ETH0 to all boards with TSEC |
| |
| The 85xx code now relies on CONFIG_HAS_ETH0 to determine whether |
| to update TSEC1's device-tree node, so we need to add it |
| to all the boards with TSECs. Do this for 83xx and 86xx, too, |
| since they will eventually do something similar. |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit d64ee908a1b525e5bb2b4cbeb5c449ad6a469666 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Aug 16 15:05:04 2007 -0500 |
| |
| Update MPC8544 DS PCI memory map |
| |
| The PCIe bus that the ULI M1575 is connected to has no possible way of |
| needing more than the fixed amount of IO & Memory space needed by the ULI. |
| |
| So make it use far less IO & memory space and have it use the shared LAW. This |
| free's up a LAW for PCIe1 IO space. Also reduce the amount of IO space needed |
| by each bus. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit ea5877e31ed63ade948fd1293895ec23fe01472e |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Aug 16 11:01:21 2007 -0500 |
| |
| Fix up some fdt issues on 8544DS |
| |
| It looks like we had a merge issue that duplicated a bit of code |
| in ft_board_setup. Also, we need to set CONFIG_HAS_ETH0 to get |
| the MAC address properly set in the device tree on boot for TSEC1 |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 07bc20560cb9d3d186cca268c05c82762e8c55ad |
| Author: Niklaus Giger <niklaus.giger@netstal.com> |
| Date: Thu Aug 16 15:16:03 2007 +0200 |
| |
| PPC4xx:HCU4/5 cleanup |
| |
| Minor cleanups to confirm to the u-boot coding style. |
| Some german expressions -> english. |
| HCU5 enforces a unique IP adress for a given slot in the rack. |
| |
| Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> |
| |
| commit 1e6b07c64967c1eb2cd84faa4c32bf2a769bc8eb |
| Author: Niklaus Giger <niklaus.giger@netstal.com> |
| Date: Thu Aug 16 15:16:02 2007 +0200 |
| |
| PPC4xx:HCU4/5 cleanup ecc/sdram init |
| |
| Make ecc initialisation robust, as DDR2-ECC errors may be generated |
| while zeroing the RAM. |
| |
| Return 16 bytes (a cacheline) less than the available memory, as the |
| board and/or PPC440EPx might have problems accessing the last bytes. |
| |
| Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> |
| |
| commit d35b508a55508535b6e8445b718585d27df733d3 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Wed Aug 15 22:29:56 2007 -0500 |
| |
| fdt: suppress unused variable 'bd' warning |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 82bd9ee77490588d4da785d75829ca63d0176baf |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Wed Aug 15 20:06:50 2007 -0500 |
| |
| Fix warnings from of_data copy fix |
| |
| Forgot to cast of_flat_tree to ulong. |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 7613afda77d5eec0f47d303025b0c661b70e4c73 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Wed Aug 15 20:03:44 2007 -0500 |
| |
| Don't wait for disconnected TSECs |
| |
| The TSEC driver's PHY code waits a long time for autonegotiation to |
| complete, even if the link is down. The PHY knows the link is |
| down or up before autonegotiation completes, so we can short-circuit |
| the process if the link is down. |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit b96c83d4ae475a70ef2635cd0e748174c44c8601 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Wed Aug 15 20:03:34 2007 -0500 |
| |
| Fix numerous bugs in the 8568 UEC support |
| |
| Actually, fixed a large bug in the UEC for *all* platforms. |
| How did this ever work? |
| |
| uec_init() did not follow the spec for eth_init(), and returned |
| 0 on success. Switch it to return the link like tsec_init() |
| (and 0 on error) |
| |
| The immap for the 8568 was defined based on MPC8568, rather than |
| CONFIG_MPC8568 |
| |
| CONFIG_QE was off |
| |
| CONFIG_ETHPRIME was set to "Freescale GETH". Now is "FSL UEC0" |
| |
| Fixed a comment about the ranges for CONFIG_ETHPRIME if TSEC_ENET is |
| enabled |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 3a79013e2adda53332dfd0b511066a805e929a9d |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Wed Aug 15 20:03:25 2007 -0500 |
| |
| Define tsec flag values in config files |
| |
| The tsec_info structure and array has a "flags" field for each |
| ethernet controller. This field is the only reason there are |
| settings. Switch to defining TSECn_FLAGS for each controller |
| in the config header, and we can greatly simplify the array, and |
| also simplify the addition of future boards. |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit ec7238229507e7f47533a611ea8c53319d234cf3 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Wed Aug 15 20:03:13 2007 -0500 |
| |
| Add support for building all boards with a TSEC |
| |
| Changes to the TSEC driver affect almost all 83xx, 85xx, and 86xx boards. |
| Now we can do a MAKEALL test on all of them! |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 10aaf716cb0dc6614df54ef78bed5144afd23ef8 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Wed Aug 15 17:30:56 2007 -0500 |
| |
| Fix of_data copying for CONFIG_OF_FLAT_TREE-using boards |
| |
| The fix, "Fix where the #ifdef CFG_BOOTMAPSZ is placed" |
| neglected to *also* put the code inside the similar #ifdef |
| for CONFIG_OF_FLAT_TREE. |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 78f9fef7f406078c8bf7191e665a73f795157746 |
| Author: Scott Wood <scottwood@freescale.com> |
| Date: Wed Aug 15 15:46:46 2007 -0500 |
| |
| mpc885ads: Don't define CONFIG_BZIP2. |
| |
| bzip2 requires a significant chunk of malloc space, and there isn't |
| enough room on mpc885ads (with only 8MB RAM) for both bzip2's malloc area |
| and a downloaded image at 0x400000. |
| |
| Signed-off-by: Scott Wood <scottwood@freescale.com> |
| |
| commit 002275a3ed8b114885f6702d6d544d0780dfe689 |
| Author: Michal Simek <Monstr@seznam.cz> |
| Date: Thu Aug 16 08:54:10 2007 +0200 |
| |
| Bios emulator - fix microblaze toolchain problem |
| |
| microblaze CPU have problem with bios_emulator code. |
| Microblaze toolchain doesn't support PRAGMA PACK. |
| |
| Signed-off-by: Michal Simek <monstr@monstr.eu> |
| |
| commit a5a38f4fd7e5366d706ff6a985f9b6715ddbc98b |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Thu Aug 16 11:51:04 2007 +0200 |
| |
| Minor Coding Style fix; Update CHANGELOG file. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 8fb6e80c06849e3013ac5c9350d8ed9e52967991 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Aug 16 11:21:49 2007 +0200 |
| |
| ppc4xx: Remove #warning in esd auto_update.c |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 2d78074d2e806edc380c1464eb9e5df335ece65e |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jun 22 17:32:28 2007 +0200 |
| |
| ppc7xx: Update CPCI750 board |
| |
| This small CPCI750 update extends the board specific command |
| "show_config" to display the Marvell strapping registers and |
| extends the PCI IDE controller. |
| |
| Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 78cff50edba6b1508eb15c2f53ce966ac891eb9e |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Thu Aug 16 10:46:28 2007 +0200 |
| |
| [FIX] Changes for bios_emulator code for others architecture |
| |
| commit 6e0e2253f039344f8ebd2787285fdba90e6714e8 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Thu Aug 16 10:45:09 2007 +0200 |
| |
| [FIX] Remove unused include file |
| |
| commit 9de469bd960cc1870bb40d6672ed42726b8b50d7 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Aug 16 10:18:33 2007 +0200 |
| |
| ppc4xx: Only enable POST FPU test on Sequoia and not Rainier |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 6da0c5bd4a53e40eb4f7eb72a4c051ecabad783c |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Aug 16 09:54:51 2007 +0200 |
| |
| Add missing rainier (PPC440GRx) target to MAKEALL and MAINTAINERs files |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 02ba7022f62bb75908296c58c63866e1d294b69a |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Aug 16 09:52:29 2007 +0200 |
| |
| ppc4xx: Update Sequoia/Rainier bootstrap command |
| |
| As suggested by David Mitchell, here an update for the Sequoia/Rainier |
| bootstrap command. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 35cc4e4823668e8745854899cfaedd4489beb0ef |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Wed Aug 15 22:30:39 2007 -0500 |
| |
| mpc83xx: enable libfdt by default on freescale boards |
| |
| this enables libfdt code by default for the |
| freescale mpc8313erdb, mpc832xemds, mpc8349emds, |
| mpc8349itx and gp boards. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 3fde9e8b22cfbd7af489214758f9839a206576cb |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Wed Aug 15 22:30:33 2007 -0500 |
| |
| mpc83xx: migrate remaining freescale boards to libfdt |
| |
| this adds libfdt support code for the freescale |
| mpc8313erdb, mpc832xemds, mpc8349emds, mpc8349itx, |
| and gp boards. |
| |
| Boards remain compatible with OF_FLAT_TREE. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 6a16e0dfcc4119b46adb1dce2d6c8fb3c5d108e1 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Wed Aug 15 22:30:26 2007 -0500 |
| |
| mpc83xx: move common /memory node update mechanism to cpu.c |
| |
| also adds common prototypes to include/common.h. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 8f9e0e9f339aee4ce31a338d5f27356eb5457f85 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Wed Aug 15 22:30:19 2007 -0500 |
| |
| mpc83xx: remaining 8360 libfdt fixes |
| |
| PCI clocks and QE frequencies weren't being updated, and the core clock |
| was being updated incorrectly. This patch also adds a /memory node if |
| it doesn't already exist prior to update. |
| |
| plus some cosmetic trimming to single line comments. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit f4b2ac5ed9aaff9920d487bff8a59696c083a524 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Wed Aug 15 22:30:12 2007 -0500 |
| |
| mpc83xx: fix UEC2->1 typo in libfdt setup code |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 19fa1c35368484d4ed10ddce8a7793c21862e3a3 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Wed Aug 15 22:30:05 2007 -0500 |
| |
| mpc83xx: add MAINTAINER and MAKEALL entries for the mpc8323erdb |
| |
| and reorder the existing 83xx maintainers alpha. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 5b4de9309d7a03aa1db2e5391ab696363391f460 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Wed Aug 15 21:15:05 2007 +0200 |
| |
| [FIX] Resolve problem with warnings |
| microblaze toolchain don't support PRAGMA PACK. |
| |
| commit d1ed28cf36ab6b1d4c479809de7252bf53d2f2d4 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Wed Aug 15 21:05:07 2007 +0200 |
| |
| [FIX] Correction command setting for Microblaze boards |
| |
| commit 7aa63d8cd30ab20ac2fd1ab86e60471de8b1f1e5 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Wed Aug 15 21:03:41 2007 +0200 |
| |
| [FIX] Correction command definition |
| |
| commit 30b52df9e906bf0e465916c2c6bb5192b438e0b8 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Wed Aug 15 11:55:35 2007 -0500 |
| |
| 86xx: Fix lingering CFG_CMD_* references in sbc8641d.h |
| |
| Remove a leftover in net/tftp.c while we're at it. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 4ce917742b1e48faa9bf9a9757545e56fb4cfe44 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Wed Aug 15 12:20:40 2007 -0500 |
| |
| Move the MPC8641HPCN board under board/freescale. |
| |
| Minor path corrections needed to ensure buildability. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 8662577fe36fdb6a44b55b998d9daac6392a736a |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Wed Aug 15 11:46:22 2007 -0500 |
| |
| 86xx: Fix lingering CFG_CMD_* references in sbc8641d.h |
| |
| Remove a leftover in net/tftp.c while we're at it. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 210f463c71917b7a4495c2103c228b9c179ae64d |
| Author: Jerry Van Baren <gvb.uboot@gmail.com> |
| Date: Wed Aug 15 11:13:15 2007 -0400 |
| |
| Fix where the #ifdef CFG_BOOTMAPSZ is placed. |
| |
| Commit 073e1b509980cefe6f53c2d7fbbcd135df1e3924 "Fix initrd/dtb |
| interaction" put the new code outside of the #if defined(CONFIG_OF_LIBFDT) |
| when it should have gone inside of the conditional. As a result, it |
| broke non-LIBFDT board builds. |
| |
| Also added a missing "not." to the comment. |
| |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit 0e19209767194a97cec6d93dba9e64d1da8d548e |
| Author: Niklaus Giger <niklaus.giger@netstal.com> |
| Date: Wed Aug 15 12:14:23 2007 +0200 |
| |
| PPC4xx:HCU4/5-Board fix compile warning |
| |
| Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> |
| |
| commit 594e79838ce5078a90d0c27abb2b2d61d5f8e8a7 |
| Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Date: Tue Aug 14 14:06:45 2007 -0500 |
| |
| Fix malloc size error in ahci_init_one. |
| |
| Typically this causes scsi init to corrupt the |
| devlist and break the coninfo command. |
| Fix a compiler size warning. |
| |
| Signed-off-by: Jason Jin <jason.jin@freescale.com> |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Acked-by: Andy Fleming <afleming@freescale.com> |
| |
| commit b361acd64fd2525c081b9b288b0804efe209c0e9 |
| Author: ksi@koi8.net <ksi@koi8.net> |
| Date: Tue Aug 14 10:02:16 2007 -0700 |
| |
| TI DaVinci - fix unsupported %hhx format |
| |
| Signed-off-by: Sergey Kubushyn <ksi@koi8.net> |
| |
| commit f01dbb5424a81453c81190dd30e945891466f621 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Aug 14 18:42:36 2007 +0200 |
| |
| Coding style cleanup. Update CHANGELOG. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 073e1b509980cefe6f53c2d7fbbcd135df1e3924 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Tue Aug 14 10:32:59 2007 -0500 |
| |
| Fix initrd/dtb interaction |
| |
| The original code would wrongly relocate the blob to be right before |
| the initrd if it existed. The blob *must* be within CFG_BOOTMAPSZ, |
| if it is defined. So we make two changes: |
| |
| 1) flag the blob for relocation whenever its address is above BOOTMAPSZ |
| |
| 2) If the blob is being relocated, relocate it before kbd, not initrd |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit e54b970173769307a116bd34028b6d0c2eea2a4e |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Tue Aug 14 15:40:00 2007 +0100 |
| |
| Supply spi interface in at45.c |
| |
| commit 4ce846ec59f36b85d6644a769690ad3feb667575 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Aug 14 15:12:01 2007 +0200 |
| |
| POST: Fix merge problem |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 429d9571f60631ae8a2fe12b11be4c75b0c2b37c |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Aug 14 15:03:17 2007 +0200 |
| |
| Coding style cleanup |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 779e975117a75e91fcebe226a63104dbfb924ab1 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Aug 14 14:44:41 2007 +0200 |
| |
| ppc4xx: Add initial Zeus (PPC405EP) board support |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit c5a172a5fd636c12467429e3f7910e53773979c6 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Aug 14 14:41:55 2007 +0200 |
| |
| POST: Add option for external ethernet loopback test |
| |
| When CFG_POST_ETHER_EXT_LOOPBACK is defined, the ethernet POST |
| is not done using an internal loopback connection, but by assuming |
| that an external loopback connector is plugged into the board. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit eb2b4010ae426245172988804ee8d9193fb41038 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Aug 14 14:39:44 2007 +0200 |
| |
| POST: Add ppc405 support to cache and UART POST |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 0c42f36f15074bd9808a7dbd7ef611fad9bf537c |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Tue Aug 14 10:46:32 2007 +0100 |
| |
| Replace lost end of at45.c. |
| |
| commit 65d7ada64557e76094b4fd3bad30a0f18f5fb2b2 |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Tue Aug 14 10:30:06 2007 +0100 |
| |
| Update Makefiles for merged and split at45.c. |
| |
| commit 3454cece2db57cb9eb7087995f7e73066a163f71 |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Tue Aug 14 10:21:06 2007 +0100 |
| |
| Delete the merged files. |
| |
| commit dcbfd2e5649f97aa04fbbc6ea2b008aa4486e225 |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Tue Aug 14 10:14:05 2007 +0100 |
| |
| Add the files. |
| |
| commit d4fc6012fd0a5c211b825691f44b06f8032c0551 |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Tue Aug 14 10:10:52 2007 +0100 |
| |
| Add MACH_TYPE records for several AT91 boards. |
| Merge to two at45.c files into a common file, split to at45.c and spi.c |
| Fix spelling error in DM9161 PHY Support. |
| Initialize at91rm9200 board (and set LED). |
| Add PIO control for at91rm9200dk LEDs and Mux. |
| Change dataflash partition boundaries to be compatible with Linux 2.6. |
| |
| Signed-off-by: Peter Pearse <peter.pearse@arm.com> |
| Signed-off-by: Ulf Samuelsson <ulf@atmel.com> |
| |
| commit 4ef35e53c693556c54b0c22d6f873de87bade253 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Aug 14 09:54:46 2007 +0200 |
| |
| Coding style cleanup, update CHANGELOG |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 85eb5caf6b906f7ec5b54814e8c7c74f55986bb7 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Aug 14 09:47:27 2007 +0200 |
| |
| Coding style cleanup; rebuild CHANGELOG |
| |
| commit 7f3f2bd2dc08e0b05e185662ca2e2d283757104a |
| Author: Randy Vinson <rvinson@linuxbox.(none)> |
| Date: Tue Feb 27 19:42:22 2007 -0700 |
| |
| 85xxCDS: Add make targets for legacy systems. |
| |
| The PCI ID select values on the Arcadia main board differ depending |
| on the version of the hardware. The standard configuration supports |
| Rev 3.1. The legacy target supports Rev 2.x. |
| |
| Signed-off-by Randy Vinson <rvinson@mvista.com> |
| |
| commit e41094c7e38177c755fbd9b182018069614f080d |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Tue Aug 14 01:50:09 2007 -0500 |
| |
| 85xxCDS: Enable the VIA PCI-to-ISA bridge. |
| |
| Author: Randy Vinson <rvinson@linuxbox.(none)> |
| |
| Enable the PCI-to-ISA bridge in the VIA Southbridge located on the |
| Arcadia main board. |
| |
| Signed-off-by: Randy Vinson <rvinson@mvista.com> |
| Signed-off-by: York Sun <yorksun@freescale.com> |
| |
| commit da9d4610d76e52c4d20a8f3d8433439a7fcf5b71 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Tue Aug 14 00:14:25 2007 -0500 |
| |
| Add support for UEC to 8568 |
| |
| Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit c59e4091ffe0148398b9e9ff14a019ea038b7432 |
| Author: Haiying Wang <Haiying.Wang@freescale.com> |
| Date: Tue Jun 19 14:18:34 2007 -0400 |
| |
| Add PCI support for MPC8568MDS board |
| |
| This patch is against u-boot-mpc85xx.git of www.denx.com |
| |
| Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> |
| Signed-off-by: Ebony Zhu <ebony.zhu@freescale.com> |
| |
| commit d111d6382c99fdea08c2312eeeae8786945e189a |
| Author: Haiying Wang <Haiying.Wang@freescale.com> |
| Date: Tue Jun 19 14:18:32 2007 -0400 |
| |
| Empirically set cpo and clk_adjust for mpc85xx DDR2 support |
| |
| This patch is against u-boot-mpc85xx.git of www.denx.com |
| |
| Setting cpo to 0x9 for frequencies higher than 333MHz is verified on |
| both MPC8548CDS board and MPC8568MDS board, especially for supporting |
| 533MHz DDR2. |
| |
| Setting clk_adjust to 0x6(3/4 late cycle) for MPC8568MDS board is for |
| DDR2 on all current board versions especially ver 1.92 or later to bring |
| up. |
| |
| Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> |
| |
| commit 3db0bef59eab1155801618cef5c481e97553b597 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Tue Aug 7 18:07:27 2007 -0500 |
| |
| Use an absolute address when jumping out of 4k boot page |
| |
| On e500 when we leave the 4k boot page we should use an absolute address since |
| we don't know where the board code may want us to be really running at. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 39980c610c9a4c381907c9e1d1b9c0e1c0dca57a |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Mon Aug 13 14:49:59 2007 -0500 |
| |
| MPC85xx BA bits not set for 3-bit bank address DIMM |
| |
| The current implementation does not set the number of bank address bits |
| (BA) in the processor. The default assumes 2 logical bank bits. This |
| works fine for a DIMM that uses devices with 4 internal banks (SPD |
| byte17 = 0x4) but needs to be set appropriately for a DIMM that uses |
| devices with 8 internal banks (SPD byte17 = 0x8). |
| |
| Signed-off-by: Greg Davis <DavisG@embeddedplanet.com> |
| |
| commit 6c543597bb4b1ecf5d8589f7abb0f39929fb7fd1 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Mon Aug 13 14:38:06 2007 -0500 |
| |
| Fix minor 85xx warnings |
| |
| Some patches had inserted warnings into the build: |
| * mpc8560ads declared data without using it |
| * cpu_init declared ecm and immap without using it in all CONFIGs |
| * MPC8548CDS.h had its default filenames changed so that they contained |
| "\m" in the paths. Made the defaults not Windows-specific (or |
| anything-specific) |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit f2cff6b104f82b993bef6086ce0c97159bbe1add |
| Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Date: Fri Jul 27 01:50:52 2007 -0500 |
| |
| 8548cds PCIE support. |
| |
| Make the early L1 cache stack region guarded to prevent speculative |
| fetches outside the locked range. |
| |
| Use _PHYS defines, not _MEM for cpu-side PCI memory mapped regions. |
| init.S whitespace cleanup. |
| |
| Allow TEXT_BASE value to be specified on command line. This allows it |
| to be set to 0xfffc0000 which cuts the uboot binary in half. |
| |
| Clear and enable lbc and ecm errors. |
| |
| Update last_busno in device-tree for pci and pcie. |
| |
| Remove load of obsolete cpu/mpc85xx/pci.0 |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Acked-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 837f1ba05cfb248aba5ab8e1fb1bfeefa07d5962 |
| Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Date: Fri Jul 27 01:50:51 2007 -0500 |
| |
| 8544ds PCIE support |
| |
| PCI1 LAW mapping should use CFG_PCI1_MEM_PHY and not _BASE address. |
| |
| Enable LBC and ECM errors and clear error registers. |
| |
| Add tftpflash env var to get uboot from tftp server and flash it. |
| |
| Add pci/pcie convenience env vars to display register space: |
| "run pcie3regs" to see all pcie3 ccsr registers |
| "run pcie3cfg" to see all cfg registers |
| Whitespace cleanup and MPC8544DS.h |
| |
| Enable CONFIG_INTERRUPTS. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Acked-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 61a21e980a7b9188424d04f1c265fdc5c21c7e85 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Tue Aug 14 01:34:21 2007 -0500 |
| |
| 85xx start.S cleanup and exception support |
| |
| From: Ed Swarthout <Ed.Swarthout@freescale.com> |
| |
| Support external interrupts from platform to eliminate system hangs. |
| Define CONFIG_INTERRUPTS board configure option to enable. |
| Enable ecm, ddr, lbc, and pci/pcie error interrupts in PIC. |
| |
| Remove extra cpu initialization redundant with hardware initialization. |
| Whitespace cleanup. |
| |
| Define and use _START_OFFSET consistent with other processors using |
| ppc_asm.tmpl |
| |
| Move additional code from .text to boot page to make room for |
| exception vectors at start of image. |
| |
| Handle Machine Check, External and Critical exceptions. |
| |
| Fix e500 machine check error determination in traps.c |
| |
| TEXT_BASE can now be 0xfffc_0000 - which cuts binary image in half. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Acked-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 7bd30fc4a6475b41d6679ae3aafc9fa505260c47 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Tue Aug 14 01:33:18 2007 -0500 |
| |
| Add MPC8544DS README |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 40c7f9b0de4e300370adfc704128fa0f79a143b6 |
| Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Date: Fri Jul 27 01:50:48 2007 -0500 |
| |
| 85xx allow debugger to configure ddr. |
| |
| Only check for mpc8548 rev 1 when compiled for 8548. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Acked-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 29372ff38c5baab7d0e3a8c14fe11fa194a38704 |
| Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Date: Fri Jul 27 01:50:47 2007 -0500 |
| |
| mpc85xx L2 cache reporting and SRAM relocation option. |
| |
| Allow debugger to override flash cs0/cs1 settings to enable alternate |
| boot regions |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Acked-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 41f0f8fb1ab92f0cba7d329de90070f822f8299f |
| Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Date: Fri Jul 27 01:50:46 2007 -0500 |
| |
| e500 needs ppc_asm.tmp MCK_EXCEPTION |
| |
| Always define MCK_EXCEPTION macro - so e500 can use it too. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Acked-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 53a5c424bf8655b7b4e2c305a441963259a26a81 |
| Author: David Updegraff <dave@cray.com> |
| Date: Mon Jun 11 10:41:07 2007 -0500 |
| |
| multicast tftp: RFC2090 |
| |
| Implemented IETF RFC2090, Multicast TFTP. Initial implementation |
| on Realtek RTL8139 and Freescale TSEC. |
| |
| Signed-off-by: David Updegraff <dave@cray.com> |
| Signed-off-by: Ben Warren <bwarren@qstreams.com> |
| |
| commit 5d110f0aa69f065ee386ec1840dfee1e8cc46bc1 |
| Author: Wilson Callan <wcallan@savantav.com> |
| Date: Sat Jul 28 10:56:13 2007 -0400 |
| |
| New CONFIG_BOOTP_SERVERIP option |
| |
| Added CONFIG_BOOTP_SERVERIP to allow the tftp server to be different |
| from the bootp server |
| |
| Signed-off-by: Wilson Callan <wcallan@savantav.com> |
| Signed-off-by: Ben Warren <bwarren@qstreams.com> |
| |
| commit 50cca8b976ec74069860208c36e64ce8f4d5e4c1 |
| Author: Mike Rapoport <mike@compulab.co.il> |
| Date: Sun Aug 12 08:48:27 2007 +0300 |
| |
| Add ability to take MAC address from the environment to DM9000 driver |
| |
| Signed-off-by: Mike Rapoport <mike@compulab.co.il> |
| Signed-off-by: Ben Warren <bwarren@qstreams.com> |
| |
| commit be5d72d10d47609326226225181e301fb9a33b58 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Mon Aug 13 21:57:53 2007 +0200 |
| |
| Minor coding style cleanup. Update CHANGELOG. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit cca34967cbd13ff6bd352be29e3f1cc88ab24c05 |
| Author: Joe Hamman <joe.hamman@embeddedspecialties.com> |
| Date: Sat Aug 11 06:54:58 2007 -0500 |
| |
| Modify SBC8641D to use new Freescale PCI routines |
| |
| PCI-Express sockets 1 and 2 verified working with Intel Pro/1000 PT |
| adapter. |
| |
| Signed-off-by: Joe Hamman <joe.hamman@embeddedspecialties.com> |
| Signde-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit a08458303e7f9db67f296980036d3292c35cb45c |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Fri Jun 29 18:38:51 2007 +0200 |
| |
| atmel_mci: Fix data timeout value |
| |
| Calculate the data timeout based on values from the CSD instead of |
| just using a hardcoded DTOR value. This is a backport of a similar fix |
| in BSP 2.0, with one additional fix: the DTOCYC value is rounded up |
| instead of down. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 0ba8eed28b575626b17e0a7882f923b83e0d7584 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Mon Aug 13 17:22:31 2007 +0200 |
| |
| AVR32: Include <div64.h> instead of <asm/div64.h> |
| |
| include/asm-avr32/div64.h was recently moved to include/div64.h, but |
| cpu/at32ap/interrupts.c wasn't properly updated (an earlier version of |
| the patch was merged perhaps?) |
| |
| This patch updates cpu/at32ap/interrupts.c so that the avr32 port |
| compiles again. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit f0d1246ed7cb5a88522244c596d7ae7e6f161283 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Wed Jun 27 13:34:26 2007 +0200 |
| |
| atmel_mci: Use 512 byte blocksize if possible |
| |
| Instead of always using the largest blocksize the card supports, check |
| if it can support smaller block sizes and use 512 bytes if possible. |
| Most cards do support this, and other parts of u-boot seem to have |
| trouble with block sizes different from 512 bytes. |
| |
| Also enable underrun/overrun protection. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Acked-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com> |
| |
| commit 273db7e1bdd1937e32f1d4507321bb721ebd3118 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Aug 13 09:05:33 2007 +0200 |
| |
| ppc4xx: Fix problem in PLL clock calculation |
| |
| This patch was originall provided by David Mitchell <dmitchell@amcc.com> |
| and fixes a bug in the PLL clock calculation. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 9986bc3e40e899bea372a99a2bca4071bdf2e24b |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Aug 12 21:34:50 2007 +0200 |
| |
| Update CHANGELOG |
| |
| commit 77d19a8bf3b0b1e401cb9f23c81e2ef419705c1a |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Aug 12 21:34:34 2007 +0200 |
| |
| Minor alignment of output, 2nd try. |
| Also update CHANGELOG |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 6b309f22a724fad8418e811751a0741b893419cf |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Aug 12 20:35:49 2007 +0200 |
| |
| Minor alignment of output |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 6f6d7b9c8559e241e8d232621542b8b59699b07b |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Aug 12 18:28:18 2007 +0200 |
| |
| Cleanup output on ADS5121 board |
| |
| Signed-off-by: Wolfgang Denk |
| |
| commit a4d2636f2a859245ed3a401f26189da2dfda4ceb |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Aug 12 15:11:38 2007 +0200 |
| |
| Adapt board configuration and fix kernel crash on MCC200 board. |
| |
| The update procedure was modified to turn off the USB subsystem |
| before exit for MCC200 and TRAB. This is necessary as otherwise the |
| USB controller continues to write periodically to system memory! |
| |
| MCC200-specific notes: |
| - the patch disables the magic key check for MCC200 |
| - the patch contains the configuration changes made |
| for the new revision of the board. |
| |
| Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com> |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit e27f3a6efb9db5a533223b05c629ff4ac8d921bf |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Aug 12 14:47:54 2007 +0200 |
| |
| Adjust default configuration of ADS5121 board. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit afaac86fe2948ac84cd9a12bbed883b3c683e7d9 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Aug 12 14:27:39 2007 +0200 |
| |
| Clean up some remaining CFG_CMD_ -> CONFIG_CMD_ issues. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 5fe6be6208dda852c3564e384bd78d75784dea3e |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Tue Aug 7 21:14:22 2007 -0400 |
| |
| Improve error print messages. |
| |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit 99dffca3b7590a16a00bc475c860b67b2a3f1462 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Tue Jul 17 13:57:04 2007 -0500 |
| |
| fdt: allow for builds that don't want env and bd_t nodes |
| |
| protect fdt_env and fdt_bd_t invocations, fix codingstyle while in the |
| area. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 91148bf7aeba142d6f348805db7625db7da64d6f |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Tue Jul 17 13:56:53 2007 -0500 |
| |
| fdt: do board setup based on fdt address specified on bootm line |
| |
| The last fdt patch to bootm did board setup based on the address |
| specified by a prior fdt address command invocation. The bootm |
| code, as its call to fdt_chosen does, should use the fdt specified |
| by the user on the bootm command. Note this restores full |
| functionality for the 8360's existing default boot environment |
| values, e.g. 'run nfsboot' (i.e. no having to 'fdt addr $fdtaddr' |
| before booting a kernel). |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit e125a2ffc209dd34794e326c7175658253beadf3 |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Tue Jul 10 20:40:39 2007 -0400 |
| |
| Call ft_board_setup() from the bootm command. |
| |
| In the patch titled "Create new fdt boardsetup command..." I removed the |
| call to ft_board_setup() from the routine fdt_chosen(), but I forgot |
| to add a direct call back into cmd_bootm.c |
| |
| This fixes the oversight by adding the direct call to the bootm command. |
| |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit fd61e55dd8cb52ce3ff91b3917af26e24b6b0845 |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Mon Jun 25 23:25:28 2007 -0400 |
| |
| Create new fdt boardsetup command, fix bug parsing [] form of set values. |
| |
| Previously ft_board_setup() was called by fdt_chosen() which was not |
| really correctly structured. This splits ft_board_setup() out by creating |
| a new fdt boardsetup command. |
| |
| Fix a bug when parsing fdt set command values which have the square |
| bracket form [00 11 22 33] - the length was updated incorrectly in when |
| parsing that form. |
| |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit 6f35ded9e85493595e0eb66a82b502a95326d049 |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Mon Jun 25 20:55:58 2007 -0400 |
| |
| Tighten up the error messages. |
| |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit c45874b05aae897a6c29d1a97d4bb708fca2756c |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Mon Jun 25 19:52:23 2007 -0400 |
| |
| Asthetic improvements: error messages and line lengths. |
| |
| Tighten up the error messages, split overlength lines. |
| |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit 35ec398f16e17df600edc1b38c1e9e62c15c9aa1 |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Fri May 25 22:08:57 2007 -0400 |
| |
| Fix fdt_chosen() to call ft_board_setup(), clean up long lines. |
| |
| The fdt_chosen() function was adding/seting some properties ad-hoc |
| improperly and duplicated (poorly) what was done in ft_board_setup() |
| |
| Clean up long lines (setting properties, printing errors). |
| |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit 06e19a07701c968f15d72c083b5872a1a11c7b01 |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Mon May 21 23:27:16 2007 -0400 |
| |
| For fdt_find_node_by_path(), handle the root path properly. |
| |
| Also removes the special case root path detection in cmd_fdt.c since it |
| is no longer necessary. |
| |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit 9675ee7208ab965d13ea8d8262d77ac4160ef549 |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Thu May 17 23:54:36 2007 -0400 |
| |
| Add fdt_find_node_by_type() and fdt_find_compatible_node() to LIBFDT |
| |
| Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> |
| Acked-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit 1a861169bc3758f9de3aead62b058736c6891246 |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Wed Jun 6 22:47:58 2007 -0400 |
| |
| Replace fdt_node_offset() with fdt_find_node_by_path(). |
| |
| The new name matches more closely the kernel's name, which is also |
| a much better description. |
| |
| Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> |
| Acked-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit addd8ce83078c25f0eca5f23adbdfc64ca50a243 |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Wed May 16 22:39:59 2007 -0400 |
| |
| Fix cmd_fdt line lengths, refactor code. |
| |
| Break lines that were greater than 80 characters in length. |
| Move the fdt print and property parsing code to separate static functions |
| to reduce coding clutter in the fdt_cmd handling body. |
| |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit 25114033ab21788810c48ba4df103b649da1223b |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Sat May 12 09:47:25 2007 -0400 |
| |
| FDT command improvements. |
| |
| Fix "fdt set" so that it will create a non-existing property. |
| Add "fdt mknode" to create nodes. |
| |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit 38eb508e8e811e2e57628f445de3a24a23c7d804 |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Sat May 12 09:45:46 2007 -0400 |
| |
| Reorganize and fix problems (returns) in the bootm command. |
| |
| Do *NOT* return after the "point of no return" has been passed. |
| If something goes wrong, the board must be reset after that point. |
| Move the "Transferring control to Linux" debug message back to where it |
| belongs: just before transferring control to linux. |
| |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit 89c8757d8f213c47709bdc4efe0695263a6080a6 |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Tue May 8 21:27:35 2007 -0400 |
| |
| Fix bugs in the CONFIG_OF_LIBFDT |
| |
| Stupid coding mistakes (identified by Timur Tabi, thanks). |
| |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit 6be07cc1ca458278c85ecdbf1a0536cff4c701ec |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Wed Apr 25 22:47:15 2007 -0400 |
| |
| Improve fdt move length handling. |
| |
| Make the length parameter optional: if not specified, do the move using |
| the current size unchanged. |
| |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit bb930e76fea6cf89ca2d98e2f7c7a6043d79327d |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Wed Apr 25 22:23:36 2007 -0400 |
| |
| Minor code clean up. |
| |
| Declare the variable fdt properly as extern. |
| Call the "set_fn" function pointer the "short way" without the full |
| dereferencing syntax. |
| |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit ba24e2ac3bdb5c489f3c787e7542b6474c4d65c6 |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Wed Apr 25 21:24:27 2007 -0400 |
| |
| Improve error messages, more informative. |
| |
| Print more than the raw libfdt error message strings. This is especially |
| useful for cluing in the user when the bootm command aborts due to |
| blob problems. |
| |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit 8096b3b8f772c1894ddeda9dbceff6a8826473a4 |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Fri Apr 20 22:46:53 2007 -0400 |
| |
| libfdt: Conditionally compile based on CONFIG_OF_LIBFDT |
| |
| This is the way u-boot reduces configured-out code. At Wolfgang |
| Grandegger and Wolfgang Denk's request, make libfdt conform. |
| |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit 923efd286411ed052d9e074f59f8986d6081061c |
| Author: Bruce Adler <bruce.adler@ccpu.com> |
| Date: Fri Aug 10 14:54:47 2007 -0700 |
| |
| add image size and descriptors for Spartan 3E FPGA chips |
| |
| Spartan 3E image sizes taken from Table 1-4 in Xilinx UG332 (v1.1) |
| |
| Signed-off by: Bruce Adler <bruce.adler@ccpu.com> |
| |
| commit fb56579ffe7ef3275b7036bb7b924e5a0d32bd70 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Fri Aug 10 15:34:48 2007 -0500 |
| |
| make MAKEALL more immune to merge conflicts |
| |
| ..by placing board entries one per line, as suggested by jdl. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 2628114ec564f969f34b5f7105fbd168cb8c9c3f |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Fri Aug 10 13:28:25 2007 -0500 |
| |
| README: Remove outdated cpu type, board type, and NAME_config lists |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 49bb59912d21aacb507eb81fd21fb7af650c706c |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Fri Aug 10 15:48:59 2007 +0800 |
| |
| mpc83xx: Suppress the warning 'burstlen' |
| |
| suppress the warning 'burstlen' of spd_sdram. |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| |
| commit c646bba6465a45c60746d4cc1602cd06c1960f2d |
| Author: Joe Hamman <joe.hamman@embeddedspecialties.com> |
| Date: Thu Aug 9 15:11:03 2007 -0500 |
| |
| Add support for SBC8641D. Config files. |
| |
| Add support for Wind River's SBC8641D reference board. |
| |
| Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com> |
| Acked-by: Wolfgang Denk <wd@denx.de> |
| Acked-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 8ac273271d57321f90505c7a51cdb1ef2113b628 |
| Author: Joe Hamman <joe.hamman@embeddedspecialties.com> |
| Date: Thu Aug 9 15:10:53 2007 -0500 |
| |
| Add support for SBC8641D. Board files. |
| |
| Add support for Wind River's SBC8641D reference board. |
| |
| Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com> |
| Acked-by: Wolfgang Denk <wd@denx.de> |
| Acked-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit c2c0ab4aff86622b837a48a0e560351f9afafb95 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Aug 10 20:34:58 2007 +0200 |
| |
| Conding style cleanup |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit c74b2108e31fe09bd1c5d291c3cf360510d4f13e |
| Author: Sergey Kubushyn <ksi@koi8.net> |
| Date: Fri Aug 10 20:26:18 2007 +0200 |
| |
| [ARM] TI DaVinci support, hopefully final |
| |
| Add support for the following DaVinci boards: |
| - DV_EVM |
| - SCHMOOGIE |
| - SONATA |
| |
| Changes: |
| |
| - Split into separate board directories |
| - Removed changes to MTD_DEBUG (or whatever it's called) |
| - New CONFIG_CMD party line followed |
| - Some cosmetic fixes, cleanup etc. |
| - Patches against the latest U-Boot tree as of now. |
| - Fixed CONFIG_CMD_NET in net files. |
| - Fixed CONFIG_CMD_EEPROM for schmoogie. |
| - Made sure it compiles and works (forceenv() link problem) on SCHMOOGIE and |
| DV_EVM. Can't check if it works on SONATA, don't have a board any more, |
| but it at least compiles. |
| |
| Here is an excerpt from session log on SCHMOOGIE... |
| |
| U-Boot 1.2.0-g6c33c785-dirty (Aug 7 2007 - 13:07:17) |
| |
| DRAM: 128 MB |
| NAND: 128 MiB |
| In: serial |
| Out: serial |
| Err: serial |
| ARM Clock : 297MHz |
| DDR Clock : 162MHz |
| ETH PHY : DP83848 @ 0x01 |
| U-Boot > iprobe |
| Valid chip addresses: 1B 38 3A 3D 3F 50 5D 6F |
| U-Boot > ping 192.168.253.10 |
| host 192.168.253.10 is alive |
| U-Boot > |
| |
| Signed-off-by: Sergey Kubushyn <ksi@koi8.net> |
| Acked-by: Dirk Behme <dirk.behme@gmail.com> |
| Acked-by: Zach Sadecki <Zach.Sadecki@ripcode.com> |
| Acked-by: Stefan Roese <sr@denx.de> |
| |
| commit 2e4d94f1e3c2961428967a33b6ff2520568391b3 |
| Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Date: Fri Jul 27 01:50:45 2007 -0500 |
| |
| fsl_pci_init cleanup. |
| |
| Do not enable normal errors created during probe (master abort, perr, |
| and pcie Invalid Configuration access). |
| |
| Add CONFIG_PCI_NOSCAN board option to prevent bus scan. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Acked-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 936b3e69b667c3eb9a61ece4e78647d3fce9fc2a |
| Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Date: Fri Jul 27 01:50:44 2007 -0500 |
| |
| pciauto_setup_device bars_num fix |
| |
| Passing bars_num=0 to pciauto_setup_device should assign no bars. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Acked-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| Acked-by: Andy Fleming <afleming@freescale.com> |
| |
| commit cf0b185e58ca0aec8ae2b2a8804ec0ef58ee21d4 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Aug 6 17:39:44 2007 -0500 |
| |
| 8641hpcn: Do correct sized pointer math. |
| |
| When I rebased Ed's patch and cleaned up a few compilation |
| problems, I apparently rebased my brain on crack first. |
| Fix that by doing (char *) sized pointer math as needed. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit cfc7a7f5bb3273c9951173c788001d45118f141f |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Thu Aug 2 14:42:20 2007 -0500 |
| |
| cpu/86xx fixes. |
| |
| Remove rev 1 fixes. |
| Always set PICGCR_MODE. |
| Enable machine check and provide board config option |
| to set and handle SoC error interrupts. |
| |
| Include MSSSR0 in error message. |
| |
| Isolate a RAMBOOT bit of code with #ifdef CFG_RAMBOOT. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 35d22f957a85a22bb3cd1ad084fa5404620d1c42 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Aug 10 10:42:25 2007 +0200 |
| |
| Coding style cleanup |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 3a6d56c20989fe27360afe743bd2a7ad4d76e48f |
| Author: Dirk Behme <dirk.behme@googlemail.com> |
| Date: Thu Aug 2 17:42:08 2007 +0200 |
| |
| Make use of generic 64bit division in nand_util.c |
| |
| Use generic 64bit division in nand_util.c. This makes nand_util.c |
| independent of any toolchain 64bit division. |
| |
| Signed-off-by: Dirk Behme <dirk.behme@gmail.com> |
| |
| commit f7c086e94e8ce9aad7268af97f73aa6884686f27 |
| Author: Dirk Behme <dirk.behme@googlemail.com> |
| Date: Thu Aug 2 17:41:14 2007 +0200 |
| |
| Move 64bit division from avr32 to generic lib |
| |
| Move the 64bit division from lib_avr32 to lib_generic. With this, all |
| boards can do_div/__div64_32 if needed, not only avr one. Code is put |
| to lib_generic, so no larger memory footprint if not used. No code |
| modifications. Thanks for proposal by HÃ¥vard Skinnemoen. |
| |
| Signed-off-by: Dirk Behme <dirk.behme@gmail.com> |
| |
| commit 157cda4d0c3d592ccbb19bbfc07d9251894f0894 |
| Author: Niklaus Giger <niklausgiger@gmx.ch> |
| Date: Fri Jul 27 11:31:22 2007 +0200 |
| |
| Add PPC4xx-HCU4 and HCU5 boards: HCU5 files |
| |
| Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> |
| |
| commit 6e5de26c6e7580faf16e87745cd488b92b492d0c |
| Author: Niklaus Giger <niklausgiger@gmx.ch> |
| Date: Fri Jul 27 11:30:33 2007 +0200 |
| |
| Add PPC4xx-HCU4 and HCU5 boards: HCU4 files |
| |
| Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> |
| |
| commit e8397fc78c9394d71de233a4d810fbc9047e4c76 |
| Author: Niklaus Giger <niklausgiger@gmx.ch> |
| Date: Fri Jul 27 11:38:26 2007 +0200 |
| |
| Add PPC4xx-HCU4 and HCU5 boards: common files |
| |
| Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> |
| |
| commit ac982ea5a4f2f993efcf52dca122f5a59df047d8 |
| Author: Niklaus Giger <niklausgiger@gmx.ch> |
| Date: Fri Jul 27 11:28:44 2007 +0200 |
| |
| Add PPC4xx-HCU4 and HCU5 boards: make related |
| |
| Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> |
| |
| commit 137fdd9f474ecb853efdace5200576308c67f18d |
| Author: Niklaus Giger <niklausgiger@gmx.ch> |
| Date: Fri Jul 27 11:28:03 2007 +0200 |
| |
| Add PPC4xx-HCU4 and HCU5 boards: HCU5 config |
| |
| Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> |
| |
| commit 714bc55b35b6f6a65cc8740a3842a543e88cdef2 |
| Author: Niklaus Giger <niklausgiger@gmx.ch> |
| Date: Fri Jul 27 11:27:15 2007 +0200 |
| |
| Add PPC4xx-HCU4 and HCU5 boards: HCU4 config |
| |
| Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> |
| |
| commit 1894dd381124bdbfbdae7cf3a6ca52a8eb1f4421 |
| Author: Niklaus Giger <niklausgiger@gmx.ch> |
| Date: Fri Jul 27 11:25:31 2007 +0200 |
| |
| Add PPC4xx-HCU4 and HCU5 boards: READMEs |
| |
| Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> |
| |
| commit 641cca9569ce351ddb287fd3343d8b1dcb591db4 |
| Author: Niklaus Giger <niklausgiger@gmx.ch> |
| Date: Fri Jul 27 11:37:40 2007 +0200 |
| |
| Add PPC4xx-HCU4 and HCU5 boards: Infrastructure |
| |
| This series of patches adds support for 2 boards from Netstal Maschinen. |
| |
| The HCU4 has a PPC405Gpr and |
| the HCU5 has a PPC440EPX. |
| |
| The HCU4 has a somehow complicated flash setup, as the booteprom is |
| only 8 bits and the CFI 16 bits wide, which makes it impossible to use a more |
| elegant solution. |
| |
| The HCU5 has only a booteprom as the whole code will be downloaded from a |
| different board which has HD, CD-ROM, etc and where all code is stored. |
| |
| This is my third try. I incorporated all suggestions made by Wolfgang and Stefan. |
| Thanks them a lot. |
| |
| Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> |
| |
| commit 3e4c90c6233618fc1806e63fde68df5f3d6a0171 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Aug 10 08:42:55 2007 +0200 |
| |
| ppc4xx: Update lwmon5 POST configuration |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 29cb25da56afe18cf5e7072a92a9d98ea8af1fd4 |
| Author: Yuri Tikhonov <yur@emcraft.com> |
| Date: Fri Aug 10 08:25:22 2007 +0200 |
| |
| POST: Add ppc4xx UART POST support without external uart clock (lwmon5) |
| |
| The patch adds support for UART POST on ppc44x-based boards with no |
| external serial clocks installed. |
| |
| Signed-off-by: Yuri Tikhonov <yur@emcraft.com> |
| Acked-by: Stefan Roese <sr@denx.de> |
| |
| commit 99c2fdab91bc633e46fb41dbaa629f87ccf6e00f |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Mon Aug 6 18:18:34 2007 -0500 |
| |
| mpc83xx: fix ITX[GP] O=builddir builds |
| |
| make: *** No rule to make target `/work/wd/tmp/board/mpc8349itx/u-boot.lds', needed by `/work/wd/tmp/u-boot'. Stop. |
| |
| Both the ITX and ITX-GP fail when you use "make O=<some dir> ..." or |
| "BUILD_DIR=<some dir> ./MAKEALL ..." |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 47e8bc846759e037b8af0e5f9c9f9cfa7a1050c3 |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Wed Aug 1 15:00:59 2007 +0800 |
| |
| mpc83xx: Correct the README for DDR ECC |
| |
| Update the README for DDR ECC, change the name |
| to README.mpc83xx.ddrecc. |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit daab8c67d2defef73dc26ab07f0c3afd1b05d019 |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Wed Aug 1 15:00:15 2007 +0800 |
| |
| mpc83xx: Consolidate the ECC support of 83xx |
| |
| Remove the duplicated source code of ecc command on the <board>.c, |
| for reused, move these code to cpu/mpc83xx directory. |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 036575c544cf1b69654d8fb334bda69c6ff3da36 |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Sat Aug 4 13:37:39 2007 +0800 |
| |
| mpc83xx: Correct the burst length for DDR2 with 32 bits |
| |
| The burst length should be 4 for DDR2 with 32 bits bus |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| |
| commit 1c274c4e05b6dc9b24edc8aa618b02f607ee6eed |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Wed Jul 25 19:25:33 2007 -0500 |
| |
| mpc83xx: add support for the MPC8323E RDB |
| |
| MPC8323E based board with 64MB fixed SDRAM, 16MB flash, |
| five 10/100 ethernet ports connected via an ICPlus IP175C |
| switch, one PCI slot, and serial. Features not supported |
| in this patch are SD card interface, 2 USB ports, and the |
| two phone ports. |
| |
| Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 343d91009d55fc5b3ff8cc940597af6c6aa1d359 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Wed Jul 25 19:25:28 2007 -0500 |
| |
| mpc83xx: fixup generic pci for libfdt |
| |
| add libfdt support to the generic 83xx pci code |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit f57ac7a7b37109245b69db80839ebee26179966a |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Wed Jul 25 19:25:22 2007 -0500 |
| |
| mpc83xx: fix 8360 and cpu functions to update fdt being passed |
| |
| ..and not the global fdt. Rename local fdt vars to blob so as not to |
| be confused with the global var with the same three-letter name. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 8be404459a6b7395415a57bb35e8377e3b2b5acb |
| Author: Jerry Van Baren <gvb.uboot@gmail.com> |
| Date: Wed Jul 4 21:34:24 2007 -0400 |
| |
| mpc83xx: Fix errors when CONFIG_OF_LIBFDT is enabled |
| |
| Several node strings were not correct (trailing slashes and properties |
| in the strings) |
| Added setting of the timebase-frequency. |
| Improved error messages and use debug() instead of printf(). |
| |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 26d02c9bbac1751c5e19294f000100b48d43a920 |
| Author: Jerry Van Baren <gvb.uboot@gmail.com> |
| Date: Wed Jul 4 21:27:30 2007 -0400 |
| |
| mpc83xx: Replace fdt_node_offset() with fdt_find_node_by_path(). |
| |
| The new name matches more closely the kernel's name, which is also |
| a much better description. |
| |
| These are the mpc83xx changes made necessary by the function name change. |
| |
| Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> |
| Acked-by: Gerald Van Baren <vanbaren@cideas.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 9be39a67c9f8fef7107f5df09d673005f04d0963 |
| Author: Dave Liu <daveliu@freescale.com> |
| Date: Mon Jun 25 10:41:56 2007 +0800 |
| |
| mpc83xx: Add support for the display of reset status |
| |
| 83xx processor family has many reset sources, such as |
| power on reset, software hard reset, software soft reset, |
| JTAG, bus monitor, software watchdog, check stop reset, |
| external hard reset, external software reset. |
| sometimes, to figure out the fault of system, we need to |
| know the cause of reset early before the prompt of |
| u-boot present. |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit ff9658d7049bf8c8e8e0a05dbe5e9f7e91aa5a5d |
| Author: Dave Liu <daveliu@freescale.com> |
| Date: Mon Jun 25 10:41:04 2007 +0800 |
| |
| mpc83xx: Fix the align bug of SDMA buffer |
| |
| According to the latest user manual, the SDMA temporary |
| buffer base address must be 4KB aligned. |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 66dc2c2dc51f8b88bb8e231bc80cd92eae1d6476 |
| Author: Dave Liu <daveliu@freescale.com> |
| Date: Mon Jun 25 13:21:12 2007 +0800 |
| |
| mpc83xx: Revise the MPC8360EMDS readme doc |
| |
| When the rev2.x silicon mount on the MPC8360EMDS baord, |
| and if you are using the u-boot version after the commit |
| 3fc0bd159103b536e1c54c6f4457a09b3aba66ca. |
| to make the ethernet interface usable, we have to setup |
| the jumpers correctly. |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit e739bc95797aac4fefc4c75b55c7c78e59d3ea9c |
| Author: Timur Tabi <timur@freescale.com> |
| Date: Tue Jul 3 13:46:32 2007 -0500 |
| |
| FSL I2C driver programs the two I2C busses differently |
| |
| The i2c_init() function in fsl_i2c.c programs the two I2C busses differently. |
| The second I2C bus has its slave address programmed incorrectly and is |
| missing a 5-us delay. |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit df33f6b4d6d63693dd9200808b242de1b86cb8e8 |
| Author: Timur Tabi <timur@freescale.com> |
| Date: Tue Jul 3 13:04:34 2007 -0500 |
| |
| Update SCCR programming in cpu_init_f() to support all 83xx processors |
| |
| Update the cpu_init_f() function in cpu/mpc83xx/cpu_init.c to program the |
| bitfields for all 83xx processors. The code to update some bitfields was |
| compiled only on some processors. Now, the bitfields are programmed as long |
| as the corresponding CFG_SCCR option is defined in the board header file. |
| This means that the board header file should not define any CFG_SCCR macros |
| for bitfields that don't exist on that processor, otherwise the SCCR will be |
| programmed incorrectly. |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 9546266999f0b9b51372636614211b88d90f0f25 |
| Author: Martin Krause <martin.krause@tqs.de> |
| Date: Fri Jun 22 13:04:22 2007 +0200 |
| |
| TQM834x: cleanup configuraton |
| |
| Remove irritating #undef DEBUG |
| |
| Signed-off-by: Martin Krause <martin.krause@tqs.de> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 5d497e6bf0f5bf63729b4a47b3fd786d3c77a1bc |
| Author: david.saada <David.Saada@ecitele.com> |
| Date: Mon Jun 18 09:09:53 2007 -0700 |
| |
| MPC83xx: Fix makefile to generate config.h file in the build directory |
| |
| MPC83xx: Fix the Makefile config sections to generate the include/config.h |
| file in the build directory instead of the source directory. |
| |
| Signed-off-by: David Saada <david.saada@ecitele.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 1ded0242e437259366792d52b7e9d1e1931d8fa5 |
| Author: Lee Nipper <Lee.Nipper@freescale.com> |
| Date: Thu Jun 14 20:07:33 2007 -0500 |
| |
| mpc83xx: Add support for 8360 silicon revision 2.1 |
| |
| This change adds 8360 silicon revision 2.1 support to u-boot. |
| |
| Signed-off-by: Lee Nipper <lee.nipper@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit a22806469a8f2b69c829f4fd5361fdebd0cb01b4 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Aug 8 04:14:28 2007 -0500 |
| |
| Treat ppc64 host as ppc |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 0dc4279b08ff82472bec2e2c90858602459febe8 |
| Author: Jason Jin <Jason.jin@freescale.com> |
| Date: Wed Aug 8 09:01:46 2007 +0800 |
| |
| Minor fix for bios emulator makefile |
| |
| Add $(obj) to LIB avoiding objects be built in the source dir |
| |
| Signed-off-by: Jason Jin <Jason.jin@freescale.com> |
| |
| commit ce981dc857adfc8036ca2f6d5d5a06c2a8aa77d6 |
| Author: Jason Jin <Jason.jin@freescale.com> |
| Date: Wed Aug 8 08:33:11 2007 +0800 |
| |
| Add CONFIG_BIOSEMU define to guard all the bios emulator code |
| |
| Signed-off-by: Jason Jin <Jason.jin@freescale.com> |
| |
| This patch fix the compile issue on the board that did not enable the bios emulator |
| |
| commit ed8106433522f2ea8933e9808346860d061d7731 |
| Author: Zach Sadecki <Zach.Sadecki@ripcode.com> |
| Date: Tue Jul 31 12:27:25 2007 -0500 |
| |
| tsec: fix multiple PHY support |
| |
| The change entitled "Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx" |
| broke multiple PHY support in tsec.c. This fixes it. |
| |
| Signed-off-by: Zach Sadecki <Zach.Sadecki@ripcode.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit dcb84b7208ade0bbebbeb56bec9c2c64f8b2eede |
| Author: Joe Hamman <joe.hamman@embeddedspecialties.com> |
| Date: Thu Aug 9 09:08:18 2007 -0500 |
| |
| tsec: Allow Ten Bit Interface address to be configurable |
| |
| Allow the address of the Ten Bit Interface (TBI) to be changed in the |
| event of a conflict with another device. |
| |
| Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com> |
| |
| commit 3ba4c2d68f6541db4677b4aea12071f56e6ff6e6 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Aug 8 09:54:26 2007 +0200 |
| |
| Coding style cleanup |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit a41de1f0d373e09c782dea558385a06247111ba5 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Sun Aug 5 05:15:18 2007 -0500 |
| |
| Port enabled for I2C signals and chipselects port configuration. |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 1a33ce65a4c51a69190dd8c408f9e1c62a66e94f |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Sun Aug 5 04:31:18 2007 -0500 |
| |
| Added NAND support |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit eaf9e447beb3e498818ef8ad0b8c1597cd506149 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Sun Aug 5 04:11:20 2007 -0500 |
| |
| Added I2C support |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 99c03c175d2689093176facf17c58ce2cb320001 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Sun Aug 5 03:58:52 2007 -0500 |
| |
| Changed CFG_CLK to gd->bus_clk for CFG_TIMER_PRESCALER. Added DECLARE_GLOBAL_DATA_PTR for time.c |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 8d1d66af54d305de29d0bbf4aa8c9e6375f7f731 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Sun Aug 5 03:55:21 2007 -0500 |
| |
| Added uart_gpio_conf() in serial_init(), seperated uart port configuration from cpu_init() to uart_gpio_conf() |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 6fde84a44b7e575ea80fe0e2d5be3b6f73d1e630 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Sun Aug 5 03:43:30 2007 -0500 |
| |
| Moved sync() from board file to include/asm-m68k/io.h |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 9e737d8476e7d6a596d16caaf6a3853a9a1190a2 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Sun Aug 5 03:30:44 2007 -0500 |
| |
| Declared attributes of void __mii_init(void) as an alias for int mii_init(void) |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 9998bd37ead85e93953559720710d3b0685c81e6 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Sun Aug 5 03:19:10 2007 -0500 |
| |
| Renamed CONFIG_MCFSERIAL to CONFIG_MCFUART |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 7c4c3722a38d40b0cf537ddae72b04f4088b190c |
| Author: Jason Jin <Jason.jin@freescale.com> |
| Date: Tue Aug 7 16:17:06 2007 +0800 |
| |
| Add CONFIG_BIOSEMU define to guard all the bios emulator code |
| |
| This patch fix the compile issue on the board that did not enable the bios emulator |
| |
| commit bf1060ea4f9eaa7e7d164a70a7d6f28939882053 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Aug 7 16:02:13 2007 +0200 |
| |
| Fix missing brace error in fs/fat/fat.c |
| [pointed out by Roderik Wildenburg] |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 706714d97a0d08d59eda4de2268c39f504688329 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Mon Aug 6 23:41:53 2007 +0200 |
| |
| [FIX] remove cute code |
| |
| commit f500d9fdeb576288656dac427052ad2c5ca0ad1a |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Mon Aug 6 23:35:26 2007 +0200 |
| |
| [FIX] Fix romfs code |
| |
| commit ab4b956d3143f8f8174089053f5dfabbb04762b0 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Mon Aug 6 23:31:49 2007 +0200 |
| |
| [FIX] Coding style cleanup - Wolfgang's suggestions |
| |
| commit 6c33c78557ca6f8da68c01ce33e278695197d3f4 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Mon Aug 6 23:21:05 2007 +0200 |
| |
| Fixed typo in README (pointed out by Martin Jost). |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 537223afa61f64480df31ce440a9cb386df4a814 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Aug 6 21:10:17 2007 +0200 |
| |
| ppc4xx: Update AMCC Bamboo README doc/README.bamboo |
| |
| As suggested by Eugene O'Brien <Eugene.O'Brien@advantechamt.com>, |
| here an updated Bamboo README. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 9c7e4b06214db61bb21f1bcbe57c97519669baae |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Mon Aug 6 02:17:36 2007 +0200 |
| |
| Coding style cleanup. Update CHANGELOG. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 221838cc7eb178370ff62aa05920a582e12ac322 |
| Author: Jason Jin <Jason.jin@freescale.com> |
| Date: Tue Jul 10 09:03:22 2007 +0800 |
| |
| Remove the bios emulator from MAI board. |
| |
| The bios emulator in the MAI board can not pass compile |
| and have a lot of crap in it. remove it and will have a |
| clean and small bios emulator in the drivers directory |
| which can be uesed for every board. |
| |
| Signed-off-by: Jason Jin <Jason.jin@freescale.com> |
| |
| commit 5618332409bb96f4448d1712899369fc80c0b489 |
| Author: Jason Jin <Jason.jin@freescale.com> |
| Date: Fri Jul 13 12:14:59 2007 +0800 |
| |
| Fix some compile issues for MAI board. |
| |
| Signed-off-by: Jason Jin <Jason.jin@freescale.com> |
| |
| commit 0f460a1ee148b648ee242c3157650287d4296260 |
| Author: Jason Jin <Jason.jin@freescale.com> |
| Date: Fri Jul 13 12:14:58 2007 +0800 |
| |
| Configurations for ATI video card BIOS emulator |
| |
| This patch add definition of the BIOS emulator and the ATI framebuffer |
| driver for MPC8641HPCN board. |
| |
| Signed-off-by: Jason Jin <Jason.jin@freescale.com> |
| Signed-off-by: Zhang Wei <wei.zhang@freescale.com> |
| |
| commit ece92f85053b8df613edcf05b26a416cbc3d629c |
| Author: Jason Jin <Jason.jin@freescale.com> |
| Date: Fri Jul 6 08:34:56 2007 +0800 |
| |
| This is a BIOS emulator, porting from SciTech for u-boot, mainly for |
| ATI video card BIOS. and can be used for x86 code emulation by some |
| modifications. |
| |
| Signed-off-by: Jason Jin <Jason.jin@freescale.com> |
| |
| commit 5072188acabde3178fac7f5a597150e6e74fd40c |
| Author: Jason Jin <Jason.jin@freescale.com> |
| Date: Fri Jul 6 08:33:33 2007 +0800 |
| |
| This is a framebuffer driver for ATI video card, can work for PCI9200, |
| X300, X700, X800 ATI video cards. |
| |
| Signed-off-by: Zhang Wei <wei.zhang@freescale.com> |
| Signed-off-by: Jason Jin <Jason.jin@freescale.com> |
| |
| commit 5728be389e65fd47f34b33c2596271eb4db751ae |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Mon Aug 6 01:01:49 2007 +0200 |
| |
| Coding style cleanup. Update CHANGELOG. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 8092fef4c29b395958bb649647da7e3775731517 |
| Author: Martin Krause <Martin.Krause@tqs.de> |
| Date: Tue Dec 12 14:26:01 2006 +0100 |
| |
| Add functions to list of exported functions |
| |
| Additionally export the following fuctions (to make trab_config build again): |
| - simple_strtol() |
| - strcmp() |
| |
| Also bump the ABI version to reflect this change |
| |
| Signed-off-by: Martin Krause <martin.krause@tqs.de> |
| |
| commit 63cec5814fab5d2b1c86982327433807a5ac0249 |
| Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Date: Thu Aug 2 14:09:49 2007 -0500 |
| |
| Make MPC8641's PCI/PCI-E driver a common driver for many FSL parts. |
| |
| All of the PCI/PCI-Express driver and initialization code that |
| was in the MPC8641HPCN port has now been moved into the common |
| drivers/fsl_pci_init.c. In a subsequent patch, this will be |
| utilized by the 85xx ports as well. |
| |
| Common PCI-E IMMAP register blocks for FSL 85xx/86xx are added. |
| |
| Also enable the second PCI-Express controller on 8641 |
| by getting its BATS and CFG_ setup right. |
| |
| Fixed a u16 vendor compiler warning in AHCI driver too. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Signed-off-by: Zhang Wei <wei.zhang@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit a274ca4f6d68830e7c916f897561cff8c4101c38 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Sun Aug 5 22:33:05 2007 +0200 |
| |
| [FIX] Coding style cleanup |
| |
| commit af8377d4eb3a0ac5a831830d5ce63fbf65fecb7f |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Sun Aug 5 16:13:31 2007 +0200 |
| |
| [FIX] Xilinx Uartlite driver |
| Because PPC405 can use UARTLITE serial interface and |
| Microblaze can use Uart16550 serial interface not only Uartlite. |
| |
| commit 98889edd50aadf862071eb5664747ad0d568a20e |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Sun Aug 5 15:54:53 2007 +0200 |
| |
| [FIX] Change configuration for XUPV2P Microblaze board |
| |
| commit 537091b4eed9302865d03fef3f7212b4fe5cf28f |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Sun Aug 5 15:53:50 2007 +0200 |
| |
| [PATCH] Added support for Xilinx Emac community driver |
| |
| commit 86b116b1b1e165ca4840daefed36d2e3b8460173 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Fri Aug 3 12:08:16 2007 +0200 |
| |
| cm1_qp1 -> cm5200: single U-Boot image for modules from the cm5200 family. |
| |
| Add the ability for modules from the Schindler cm5200 family to use a |
| single U-Boot image: |
| - rename cm1_qp1 to cm5200 |
| - add run-time module detection |
| - parametrize SDRAM configuration according to the module we are running on |
| |
| Few minor, board-specific fixes included in this patch: |
| - better MAC address handling |
| - updated default environment ('update' command uses +{filesize} now) |
| - improved error messages in the auto-update code |
| - allow booting U-Boot from RAM (CFG_RAMBOOT) |
| |
| Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> |
| Signed-off-by: Piotr Kruszynski <ppk@semihalf.com> |
| Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit c7e717ebc2b044d7a71062552c9dc0f54ea9b779 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Fri Aug 3 04:05:25 2007 -0500 |
| |
| Add Marvell 1149 PHY support to the TSEC |
| |
| commit b1b54e352028ed370c3aa95d6fdeb9d64c5d2f86 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Thu Aug 2 21:27:46 2007 +0200 |
| |
| Coding style cleanup, update CHANGELOG |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 63e22764d2f8653f68888c667eb65b3996b52680 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Thu Aug 2 10:11:18 2007 +0200 |
| |
| Minor cleanup of <board>_nand build rules. |
| |
| commit 9ca8d79de096c65b9b9c867259b3ff4685f775ef |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Aug 2 08:33:56 2007 +0200 |
| |
| ppc4xx: Code cleanup |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit c92409812206ac67a7fa7aae298539a9c3804a46 |
| Author: Grzegorz Bernacki <gjb@semihalf.com> |
| Date: Tue Jul 31 18:51:48 2007 +0200 |
| |
| [ppc440SPe] Graceful recovery from machine check during PCIe configuration |
| |
| During config transactions on the PCIe bus an attempt to scan for a |
| non-existent device can lead to a machine check exception with certain |
| peripheral devices. In order to avoid crashing in such scenarios the |
| instrumented versions of the config cycle read routines are introduced, so |
| the exceptions fixups framework can gracefully recover. |
| |
| Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> |
| Acked-by: Rafal Jaworowski <raj@semihalf.com> |
| |
| commit dec99558b9ea75a37940d07f41a3565a50b54ad1 |
| Author: Rafal Jaworowski <raj@semihalf.com> |
| Date: Tue Jul 31 18:19:54 2007 +0200 |
| |
| [ppc4xx] Separate settings for PCIe bus numbering on 440SPe rev.A |
| |
| This brings back separate settings for PCIe bus numbers depending on chip |
| revision, which got eliminated in 2b393b0f0af8402ef43b25c1968bfd29714ddffa |
| commit. 440SPe rev. A does NOT work properly with the same settings as for |
| the rev. B (no devices are seen on the bus during enumeration). |
| |
| Signed-off-by: Rafal Jaworowski <raj@semihalf.com> |
| |
| commit cdd917a43da6fa7fc8f54a3cc9f420ce5ecf3197 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Thu Aug 2 00:48:45 2007 +0200 |
| |
| Fix build errors and warnings / code cleanup. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit d2f68006627eda6cb6c7f364bddf621dbfd2fc68 |
| Author: Eugene OBrien <eugene.obrien@advantechamt.com> |
| Date: Tue Jul 31 10:24:56 2007 +0200 |
| |
| ppc4xx: Update AMCC Bamboo 440EP support |
| |
| Changed storage type of cfg_simulate_spd_eeprom to const |
| Changed storage type of gpio_tab to stack storage |
| (Cannot access global data declarations in .bss until afer code relocation) |
| |
| Improved SDRAM tests to catch problems where data is not uniquely addressable |
| (e.g. incorrectly programmed SDRAM row or columns) |
| |
| Added CONFIG_PROG_SDRAM_TLB to support Bamboo SIMM/DIMM modules |
| Fixed AM29LV320DT (OpCode Flash) sector map |
| |
| Signed-off-by: Eugene OBrien <eugene.obrien@advantechamt.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit ea9f6bce383cc9fbcdee28b5836109b1a6dba574 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Jul 31 08:37:01 2007 +0200 |
| |
| ppc4xx: Update 440EPx lwmon5 board support |
| |
| - Clear ECC status regs after ECC POST test |
| - Set dcbz for ECC generation with caches enabled as default |
| - Code cleanup |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 27a528fb41433c4c1e2b5d6bd3fd8d78606fc724 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Jul 30 11:04:57 2007 +0200 |
| |
| ppc4xx: Only print ECC related info when the error bis are set |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit e36220a4baf1f188ba60f17e9d0f043069b1362a |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Fri Jul 27 16:44:31 2007 +0200 |
| |
| new FPGA image for PLU405 board |
| |
| new FPGA image for PLU405 board with improved CompactFlash timing |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit 8993e54b6f397973794f3d6f47d3b3c0c98dd4f6 |
| Author: Rafal Jaworowski <raj@semihalf.com> |
| Date: Fri Jul 27 14:43:59 2007 +0200 |
| |
| [ADS5121] Support for the ADS5121 board |
| |
| The following MPC5121e subsystems are supported: |
| |
| - low-level CPU init |
| - NOR Boot Flash (common CFI driver) |
| - DDR SDRAM |
| - FEC |
| - I2C |
| - Watchdog |
| |
| Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> |
| Signed-off-by: Rafal Jaworowski <raj@semihalf.com> |
| Signed-off-by: Jan Wrobel <wrr@semihalf.com> |
| |
| commit 1863cfb7b100ba0ee3401799457a01dc058745f8 |
| Author: Rafal Jaworowski <raj@semihalf.com> |
| Date: Fri Jul 27 14:22:04 2007 +0200 |
| |
| [PPC] Remove unused MSR_USER definition |
| |
| Signed-off-by: Rafal Jaworowski <raj@semihalf.com> |
| |
| commit d4024bb72dd81695ec099b2199eda0d27c623e62 |
| Author: John Otken <john@softadvances.com> |
| Date: Thu Jul 26 17:49:11 2007 +0200 |
| |
| ppc4xx: Add support for AMCC 405EP Taihu board |
| |
| Signed-off-by: John Otken <john@softadvances.com> |
| |
| commit b66091de6c7390620312c2501db23d8391e7cabb |
| Author: Anatolij Gustschin <agust@denx.de> |
| Date: Thu Jul 26 15:08:01 2007 +0200 |
| |
| ppc4xx: lwmon5: Update Lime initialization |
| |
| Change Lime SDRAM initialization to now support 100MHz and |
| 133MHz (if enabled). Also the framebuffer is initialized to |
| display a blue rectangle with a white border. |
| |
| Signed-off-by: Anatolij Gustschin <agust@denx.de> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 9f24a808f17fc0f37b7fb4805f734741335caecc |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Jul 24 09:52:52 2007 +0200 |
| |
| ppc4xx: lwmon5: Support for 128 MByte NOR FLASH added |
| |
| The used Intel NOR FLASH chips have internally two dies, and are now |
| treated as two seperate chips. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit aedf5bde179ecfbd0a96130d18996a96518b785f |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Jul 24 07:20:09 2007 +0200 |
| |
| ppc4xx: Fix lwmon5 interrupt controller setup (polarity, trigger...) |
| |
| As suggested by Hakan Eryigit, here an updated setup for the lwmon5 |
| interrupt controller. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit a71d96eac8130b53a91f93cd10c70fca0db18d52 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jul 20 15:03:44 2007 +0200 |
| |
| ppc4xx: Fix bug with default GPIO output value |
| |
| As spotted by Matthias Fuchs, the default output values for all GPIO1 |
| outputs were not setup correctly. This patch fixes this issue. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 531e3e8b831f357056448fa573137d5fb37000fd |
| Author: Pavel Kolesnikov <concord@emcraft.com> |
| Date: Fri Jul 20 15:03:03 2007 +0200 |
| |
| POST: Add ECC POST for the lwmon5 board |
| |
| This patch adds ECC Post test for the Lwmon5 board based |
| on PPC440EPx to U-Boot. |
| |
| Signed-off-by: Pavel Kolesnikov <concord@emcraft.com> |
| Acked-by: Yuri Tikhonov <yur@emcraft.com> |
| Acked-by: Stefan Roese <sr@denx.de> |
| |
| commit cc3023b9f95d7ac959a764471a65001062aecf41 |
| Author: Rafal Jaworowski <raj@semihalf.com> |
| Date: Thu Jul 19 17:12:28 2007 +0200 |
| |
| Fix breakage of 8xx boards from recent commit. |
| |
| This patch fixes the negative consequences for 8xx of the recent |
| "ppc4xx: Clean up 440 exceptions handling" commit. |
| |
| Signed-off-by: Rafal Jaworowski <raj@semihalf.com> |
| |
| commit c883f6ea32dce91f07670b3aafecf6c99b1e5341 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Jul 16 13:11:12 2007 +0200 |
| |
| Coding style cleanup |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 8848ec858f74ed6dab06fb6d5ddc933e0a1328bf |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Jul 16 10:02:12 2007 +0200 |
| |
| ppc4xx: Code cleanup |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 2a49fc17d09020e7ebd9536694d99d20e419fcb8 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Jul 16 10:01:38 2007 +0200 |
| |
| ppc4xx: AMCC Luan uses the new boardspecific DDR2 controller setup |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit df3f17422aeb03fb81a7ac8c78d2b05d05aa4cf9 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Jul 16 10:00:43 2007 +0200 |
| |
| ppc4xx: Support for Yucca board with 440SPe Rev A added to 44x_spd_ddr2.c |
| |
| The new boardspecific DDR2 controller configuration is used for the Yucca |
| board. Now the Yucca board with 440SPe Rev. A chips is also supported. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 6ed14addf97c8cd8f531e9ae7b2d3e222fffd53e |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Jul 16 09:57:00 2007 +0200 |
| |
| ppc4xx: Add new weak functions to support boardspecific DDR2 configuration |
| |
| The new "weak" functions ddr_wrdtr() and ddr_clktr() are added to better |
| support non default, boardspecific DDR(2) controller configuration. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 5743a9207a370b90f09b20ebd61167c806b937f3 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Jul 16 08:53:51 2007 +0200 |
| |
| ppc4xx: Add remove_tlb() function to remove a mem area from TLB setup |
| |
| The new function remove_tlb() can be used to remove the TLB's used to |
| map a specific memory region. This is especially useful for the DDR(2) |
| setup routines which configure the SDRAM area temporarily as a cached |
| area (for speedup on auto-calibration and ECC generation) and later |
| need this area uncached for normal usage. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 0c0a9cda1bde37106520476ed486bd67eb8d30ae |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Mon Jul 16 00:31:07 2007 +0200 |
| |
| [PATCH] Support for Xilinx EmacLite controller |
| |
| commit 3a6cab844cf74f76639d795e0be8717e02c86af7 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sat Jul 14 22:51:02 2007 +0200 |
| |
| Update CHANGELOG |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 5280f352c8da33b1d7fbf448768717d9e16ff9a1 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Sat Jul 14 13:11:28 2007 +0200 |
| |
| [FIX] support for simply measuring time |
| |
| commit 91bb4ca665d2e0cf7f60c4b5b370990250ec0c43 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Sat Jul 14 12:41:23 2007 +0200 |
| |
| [FS] Added support for ROMFS |
| |
| commit 011595307731a7a67a7445d107c279d031e8ab97 |
| Author: Heiko Schocher <hs@pollux.denx.de> |
| Date: Sat Jul 14 01:06:58 2007 +0200 |
| |
| [PCS440EP] - fix compile error, if BUILD_DIR is used |
| |
| commit 5a2f1098d81ad58b309e5e558d0492643166a799 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Sat Jul 14 00:18:48 2007 +0200 |
| |
| [PATCH] Support time without timer |
| |
| commit a476ca2ac2217ddd05a2bf0c514075814b10a3c0 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Fri Jul 13 21:43:55 2007 +0200 |
| |
| [PATCH] Remove problem with disabled BARREL SHIFTER |
| |
| commit 55e26ad62107d2f14f757de3ae0b14b9aa7aed94 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Fri Jul 13 21:41:44 2007 +0200 |
| |
| [FIX] correct help for rspr |
| |
| commit fad63407154f46246ce80d53a9c669a44362ac67 |
| Author: Heiko Schocher <hs@pollux.denx.de> |
| Date: Fri Jul 13 09:54:17 2007 +0200 |
| |
| make show_boot_progress () weak. |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit 907902472391b6ca1876ec300687562ecaf459b1 |
| Author: Heiko Schocher <hs@pollux.denx.de> |
| Date: Fri Jul 13 08:26:05 2007 +0200 |
| |
| [PCS440EP] - The DIAG LEDs are now blinking, if an error occur |
| - fix compile error, if BUILD_DIR is used |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit a2e1c7098cf9574386b0c96841dfc8ea5cc93578 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Jul 12 16:32:08 2007 +0200 |
| |
| ppc4xx: Change receive buffer handling in the 4xx emac driver |
| |
| This change fixes a bug in the receive buffer handling, that |
| could lead to problems upon high network traffic (broadcasts...). |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 239f05ee4dd4cfe0b50f251b533dcebe9e67c360 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Thu Jul 12 01:45:34 2007 +0200 |
| |
| Update CHANGELOG, minor coding style cleanup. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 5a56af3b522ba47fb33a3fee84d23bf1e5429654 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Fri Jun 8 16:41:18 2007 -0500 |
| |
| Remove erroneous errata code from Marvel 88E1111S driver |
| |
| The Marvel 88E1111S driver for the TSEC was copied from the |
| 88E1101 driver, and included a fix for an erratum which does not |
| exist on that part. Now it is removed |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 982efcf23fd03647e01e2fbe28a7a36239156cc0 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Tue Jun 5 16:38:44 2007 -0500 |
| |
| From: eran liberty <eran.liberty@gmail.com> |
| |
| adds the reset register to 85xx immap |
| |
| Signed-off-by: Eran Liberty <eran.liberty@gmail.com> |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit d3ec0d943a045bdb99e159e7bbc77430e09f11d7 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Thu May 10 17:50:01 2007 -0500 |
| |
| Polished the 85xx ADS config files |
| |
| Made the boot commands use device trees by default. |
| Also moved the ramdisk to 1000000 (I think the previous address |
| was getting overridden during boot). |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit bfb37b32d1b0b03f18077dba49cc66a6e76fa038 |
| Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Date: Wed May 9 11:03:32 2007 -0500 |
| |
| 8544ds: Fix Makefile after moving pixis to board/freescale. |
| |
| The OBJTREE != SRCTREE build scenario was broken. |
| This fixes it. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 2a3cee43c3b71fa5b8d91db19f05067865290f3e |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Wed May 9 00:54:20 2007 -0500 |
| |
| tsec: Fix PHY code to match first driver |
| |
| Jarrold Wen noticed that the generic PHY code always matches |
| under the current implementation. Change it so the first match |
| wins, and *only* unknown PHYs trigger the generic driver |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit ccc091aac61a38cd998d575d92f7232e256d6312 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Tue May 8 17:27:43 2007 -0500 |
| |
| Add support for CPM device tree configuration to 8560 ADS |
| |
| * Adds code to modify CPM frequencies |
| * Cleans up the config file to #define TSEC and (for now) #undef FCC |
| * Adds the MII command for all 8560 ADS configurations |
| * Updates config file to provide convenience commands for booting |
| with a device tree |
| |
| Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com> |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 7507d56ccaf7aae1c474342a9a5540165cd7e9d9 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Tue May 8 17:23:02 2007 -0500 |
| |
| Fix Marvell 88e1145 PHY init code |
| |
| Fix a bug in the Marvell 88e1145 PHY init code in the TSEC driver |
| where the reset was being done after the errata code instead of |
| before. |
| |
| Signed-off-by: Haiying Wang <haiying.wang@freescale.com> |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 5dc210dec5bace98a50b6ba905347890091a9bb0 |
| Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Date: Wed Jul 11 14:52:16 2007 -0500 |
| |
| Add simple agent/end-point configuration in PCI AutoConfig for PCI_CLASS_PROCESSOR_POWERPC. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| |
| commit e8b85f3ba4cd8930e0a2fea2100c815d64201765 |
| Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Date: Wed Jul 11 14:52:08 2007 -0500 |
| |
| pciauto setup bridge |
| |
| The P2P bridge bus numbers programmed into the device are relative to |
| hose->first_busno. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| |
| commit 571f49fa717004ca4268b4e24057efc7bf9f987b |
| Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Date: Wed Jul 11 14:52:01 2007 -0500 |
| |
| Support PCIe extended config registers |
| |
| FSL PCIe block has extended cfg registers in the 100 and 400 range. |
| For example, to read the LTSSM register: pci display <busn>.0 404 1 |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| |
| commit ba5feb12581bb2912ce301e4866b71f846e9fc07 |
| Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Date: Wed Jul 11 14:51:48 2007 -0500 |
| |
| Minor improvements to drivers/pci_auto.c |
| |
| - Make pciauto_{pre,post}scan_setup_bridge non-static |
| - Added physical address display in debug messages. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| |
| commit 40e81addab7bb74d20ddf681ce9babc880a828ee |
| Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Date: Wed Jul 11 14:51:35 2007 -0500 |
| |
| Start pci hose scan from hose->current_busno. |
| |
| Ensure hose->current_busno is not less than first_busno. This fixes |
| broken board code which leaves current_busno=0 when first_busno is |
| greater than 0 for the cases with multiple controllers. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| |
| commit 3865b1fb7843a08ad49a6319a36415752276ff48 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Jul 11 12:13:53 2007 +0200 |
| |
| Fix some compile problems introduced by the latest CFG_CMD_xxx cleanup |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit fa1df308926a6f70e3504c57514ef27ac31fd13a |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Wed Jul 11 20:11:07 2007 +0200 |
| |
| CM1.QP1: Support for the Schindler CM1.QP1 board. |
| |
| Signed-off-by: Piotr Kruszynski <ppk@semihalf.com> |
| Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit 96e1d75be8193ca79e4215a368bf9d7f2362450f |
| Author: Heiko Schocher <hs@pollux.denx.de> |
| Date: Wed Jul 11 18:39:11 2007 +0200 |
| |
| [PCS440EP] - Show on the DIAG LEDs, if the SHA1 check failed |
| - now the Flash ST M29W040B is supported (not tested) |
| - fix the "led" command |
| - fix compile error, if BUILD_DIR is used |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit e9514751cfa5cce61ea699fa0d3eb37898a5eeb5 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sun Jul 8 13:44:27 2007 +0200 |
| |
| Fix malloc problem introduced with the relocation fixup for the PPC platform |
| |
| The relocation fixup didn't handle the malloc pointer initialization |
| correctly. This patch fixes this problem. Tested successfully on 4xx. |
| The relocation fixup patches for 4xx will follow soon. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 0dca874db62718e41253659e60f3a1de7eb418ce |
| Author: TsiChung <tcliew@Goku.(none)> |
| Date: Tue Jul 10 15:45:43 2007 -0500 |
| |
| Cache update and added CFG_UNIFY_CACHE |
| |
| Enabled cache in cpu_init_f() for faster flash to mem allocation. Updated cache handling in start.S. Applied cache invalidate in fec_send() and fec_recv(). Added CFG_UNIFY_CACHE for CF V3 only. |
| |
| Signed-off-by: TsiChung <tcliew@Goku.(none)> |
| |
| commit 52b017604a8f4d4a795880ef6e7861d7f2f1b005 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Jul 5 23:36:16 2007 -0500 |
| |
| Update header file. Include dtimer_intr_setup(). Changed timer divider to global define. |
| |
| Include immap.h and timer.h. Moved dtimer interrupt setup to dtimer_intr_setup() from cpu/mcf532x/interrupts.c. Changed (CFG_CLK /1000000) -1 << 8 to CFG_TIMER_PRESCALER |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 5cdc07c7ef8f08ea55d3c47ed9221d91aa6d5fac |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Jul 5 23:31:25 2007 -0500 |
| |
| Update header files |
| |
| Include immap.h and renamed mcfrtc.h to rtc.h |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 2870e98ac8e5553e9187b12a47e5f46babb53990 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Jul 5 23:29:21 2007 -0500 |
| |
| Add mcffec_initialize() |
| |
| Added mcffec_initialize() in eth_initialize() |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 45a25bfd0c52f8a3fa137216bc94d32f90bedc5d |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Jul 5 23:27:40 2007 -0500 |
| |
| Update header file and clean up |
| |
| Include immap.h |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 0cee9c66318602c856a899ae5fa7579ccba6443a |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Jul 5 23:23:15 2007 -0500 |
| |
| New uart structure and defines |
| |
| Seperated from mcfuart.h |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit a90e79de8d99e9c9d69d60bfff9f24c337165900 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Jul 5 23:22:31 2007 -0500 |
| |
| New timer structure and defines |
| |
| Seperated from mcftimer.h |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit e04acb2eba4782489417240eff76e20e176aec10 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Jul 5 23:21:09 2007 -0500 |
| |
| Rename mcfrtc to rtc |
| |
| Since it is already in m68k folder, un-necessary to pad mcf. Replaced immap_5329.h and m5329.h to immap.h |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 2bd806fe4fc23958b8f78778199e7a6e3f8f6ad5 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Jul 5 23:17:36 2007 -0500 |
| |
| Rename mcfserial.c. Update include header |
| |
| Renamed mcfserial.c to mcfuart.c. Modified Makefile for mcfuart.o from mcfserial.o. Replace immap_5329.h and m5329.h to immap.h |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit f2208fbc2eb9de3f4285bfaa021c6ebae16c9b0e |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Jul 5 23:13:58 2007 -0500 |
| |
| Header file update, clean up and cache handling |
| |
| Replaced immap_5329.h and m5329.h with immap.h. Included cache_invalid. |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 2e3f25ae9082daa9f5d181db45dfbc2e52ce0f97 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Jul 5 23:10:40 2007 -0500 |
| |
| Create interrupts.c and modify Makefile |
| |
| interrupt_init() and dtimer_intr_setup() are placed in interrupts.c. Added interrupts.o to Makefile |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit ddd104f1ed655eda50c06ba636237a83ed943f34 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Jul 5 23:06:55 2007 -0500 |
| |
| Enable Icache |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit b9bf3de377b2bae70c983c9b97feae914999e735 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Jul 5 23:05:31 2007 -0500 |
| |
| Update header file and some clean up |
| |
| Replaced immap_5329.h and m5329.h with immap.h. Removed whitespaces. |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 84a015b52ec820a5ae173717d78516de731c89c2 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Jul 5 23:03:28 2007 -0500 |
| |
| Update header file and enable icache |
| |
| Replaced immap_5329.h and m5329.h with immap.h. Enabled icache_enable() in cpu_init_r(). |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 7a17e759c7a8b58e910daf54df611e94fc8ca074 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Jul 5 23:01:22 2007 -0500 |
| |
| Update header file and removed interrupt_init() |
| |
| Replace immap_5329.h and m5329.h with immap.h. Removed interrupt_init() and placed it in interrupts.c |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 3b635492c95bd0d6e08f93f699821cba1f602a64 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Jul 5 22:57:46 2007 -0500 |
| |
| Update for flash.o and mii.o |
| |
| Removed flash.o and added mii.o |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit c5ded275d839e4ff79f41718d50a835d989f57bc |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Jul 5 22:56:19 2007 -0500 |
| |
| MII functions calls. |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 427c814104560e29bda14955c67703245aaaa5b4 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Jul 5 22:54:42 2007 -0500 |
| |
| Removed MII functions and replaced immap_5329.h and m5329.h with immap.h. |
| |
| The removed MII routines will be placed in mii.c. |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 01a793fda09c63df5a496f09dc1c7cb26e6751a2 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Jul 5 22:51:05 2007 -0500 |
| |
| Duplicate code |
| |
| There is a Common Flash Interface Driver existed. To use the CFI driver, define CFG_FLASH_CFI in configuration file. |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 2744354a8437b8f78db178e30660215688bff570 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Jul 5 22:46:38 2007 -0500 |
| |
| Seperate old structure defines and new structure defines |
| |
| Removed new uart structure and defines to uart.h |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 2bd58608dbcff8890ca9a0c59e861ac24f8bb230 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Jul 5 22:45:01 2007 -0500 |
| |
| Seperate old structure defines and new structure defines |
| |
| New timer structure and defines will move to new timer.h |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 8cd5cd6de4ff92e03978338ed7aeb3ce7b7b9784 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Jul 5 22:42:23 2007 -0500 |
| |
| Clean up |
| |
| Removed whitespace |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 514871f565dd8bd1121e4a3ac1665a790e20b8f2 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Jul 5 22:41:24 2007 -0500 |
| |
| Clean up |
| |
| Replaced whitespace with tabs |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 48dbfeabc7afffe30609a4489f10c22cb67ef7dd |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Jul 5 22:39:07 2007 -0500 |
| |
| Create new header file and move peripherals base address from configs file to new header file. |
| |
| Create new header file to include immap_5xxx.h and m5xxx.h and to share among drivers without update in driver file each processor is added. Moved peripherals base address and defines from configs file to immap.h. |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit be296e31c4411f96d9cb3d2afc8fcb006867abfa |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Jul 5 22:24:58 2007 -0500 |
| |
| Revert file mode |
| |
| Changed MAKEALL file mode to executable, removed executable file mode from Makefile |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit b3aff0cb9ecf236d7e8c93761dd1dadf6837a582 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Jul 10 11:19:50 2007 -0500 |
| |
| disk/ doc/ lib_*/ and tools/: Remove lingering references to CFG_CMD_* symbols. |
| |
| Fixed some broken instances of "#ifdef CMD_CFG_IDE" too. |
| Those always evaluated TRUE, and thus were always compiled |
| even when IDE really wasn't defined/wanted. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit ddb5d86f0215bcb6c293510c50eb050e92883b7a |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Jul 10 11:13:21 2007 -0500 |
| |
| drivers/: Remove lingering references to CFG_CMD_* symbols. |
| |
| Fixed some broken instances of "#ifdef CMD_CFG_IDE" too. |
| Those always evaluated TRUE, and thus were always compiled |
| even when IDE really wasn't defined/wanted. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit f40a7f3e3888b42a43674b099e5470022c8c544c |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Jul 10 11:07:56 2007 -0500 |
| |
| fs/: Remove lingering references to CFG_CMD_* symbols. |
| |
| Fixed some broken instances of "#ifdef CMD_CFG_IDE" too. |
| Those always evaluated TRUE, and thus were always compiled |
| even when IDE really wasn't defined/wanted. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 610f2e9c28a9c101e09fa1b78143cf5f00ed1593 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Jul 10 11:05:02 2007 -0500 |
| |
| net/: Remove lingering references to CFG_CMD_* symbols. |
| |
| Fixed some broken instances of "#ifdef CMD_CFG_IDE" too. |
| Those always evaluated TRUE, and thus were always compiled |
| even when IDE really wasn't defined/wanted. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 902531788376046da212afd1661cffb62f3daa1c |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Jul 10 11:02:44 2007 -0500 |
| |
| common/: Remove lingering references to CFG_CMD_* symbols. |
| |
| Fixed some broken instances of "#ifdef CMD_CFG_IDE" too. |
| Those always evaluated TRUE, and thus were always compiled |
| even when IDE really wasn't defined/wanted. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit d39b57415838c73fb0a37eca84de3c68ba990586 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Jul 10 10:48:22 2007 -0500 |
| |
| board/[j-z]*: Remove lingering references to CFG_CMD_* symbols. |
| |
| Fixed some broken instances of "#ifdef CMD_CFG_IDE" too. |
| Those always evaluated TRUE, and thus were always compiled |
| even when IDE really wasn't defined/wanted. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 77a318545d57aefa844752465b94c7e09a3f26d0 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Jul 10 10:39:10 2007 -0500 |
| |
| board/[A-Za-i]*: Remove lingering references to CFG_CMD_* symbols. |
| |
| Fixed some broken instances of "#ifdef CMD_CFG_IDE" too. |
| Those always evaluated TRUE, and thus were always compiled |
| even when IDE really wasn't defined/wanted. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 068b60a0eb7e73b243ca55399f2a7df76e2c3f3d |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Jul 10 10:27:39 2007 -0500 |
| |
| cpu/ rtc/ include/: Remove lingering references to CFG_CMD_* symbols. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 079a136c3588814784561d6e4856970ee82d6e2a |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Jul 10 10:12:10 2007 -0500 |
| |
| include/configs/[p-z]* + misc: Cleanup BOOTP and lingering CFG_CMD_*. |
| |
| Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h |
| used to be included but CONFIG_BOOTP_MASK was not defined. |
| |
| Remove lingering references to CFG_CMD_* symbols. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 7f5c01577400c74cc5bac74f41dd0d3c79df623c |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Jul 10 09:38:02 2007 -0500 |
| |
| include/configs/[g-o]*: Cleanup BOOTP and lingering CFG_CMD_*. |
| |
| Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h |
| used to be included but CONFIG_BOOTP_MASK was not defined. |
| |
| Remove lingering references to CFG_CMD_* symbols. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 80ff4f99b84b64edca3fd10da365ec1493be1c95 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Jul 10 09:29:01 2007 -0500 |
| |
| include/configs/[a-e]*: Cleanup BOOTP and lingering CFG_CMD_*. |
| |
| Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h |
| used to be included but CONFIG_BOOTP_MASK was not defined. |
| |
| Remove lingering references to CFG_CMD_* symbols. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit a1aa0bb502e25fd598b5e0ccdfb2c174921d714a |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Jul 10 09:22:23 2007 -0500 |
| |
| include/configs/[P-Z]*: Cleanup BOOTP and lingering CFG_CMD_*. |
| |
| Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h |
| used to be included but CONFIG_BOOTP_MASK was not defined. |
| |
| Remove lingering references to CFG_CMD_* symbols. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 659e2f6736232a08acca8785c206e2b4d9cd07d7 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Jul 10 09:10:49 2007 -0500 |
| |
| include/configs/[J-O]*: Cleanup BOOTP and lingering CFG_CMD_*. |
| |
| Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h |
| used to be included but CONFIG_BOOTP_MASK was not defined. |
| |
| Remove lingering references to CFG_CMD_* symbols. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 11799434c5ff15a612577bb1ad1f4ea1a0595e4b |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Jul 10 09:02:57 2007 -0500 |
| |
| include/configs/[A-I]*: Cleanup BOOTP and lingering CFG_CMD_*. |
| |
| Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h |
| used to be included but CONFIG_BOOTP_MASK was not defined. |
| |
| Remove lingering references to CFG_CMD_* symbols. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 1fe80d79c5c4e52d3410a7ab4b8515da095cdab3 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Jul 9 22:08:34 2007 -0500 |
| |
| Finally retire cmd_confdefs.h and CONFIG_BOOTP_MASK! |
| |
| All of the choices for CONFIG_BOOTP_ are now documented in |
| the README file. You must now individually select exactly |
| the set that you want using a series of |
| #define CONFIG_BOOTP_<x> |
| statements in the board port config files now. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit d3b8c1a743dcd31625c99e6a44590f207eb00028 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Jul 9 21:57:31 2007 -0500 |
| |
| include/configs/[m-z]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 2fd90ce575b02d189cbf443c85309bcd001aa393 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Jul 9 21:48:26 2007 -0500 |
| |
| include/configs/[a-m]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 37d4bb70586659dedef1658ce1bed071be098aec |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Jul 9 21:38:02 2007 -0500 |
| |
| include/configs/[T-Z]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 18225e8dd1950bd6dbf35011e436db7f474c187d |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Jul 9 21:31:24 2007 -0500 |
| |
| include/configs/[P-S]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 7be044e4ea644b0ef1c486dadc1a4c2665b4374d |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Jul 9 21:24:19 2007 -0500 |
| |
| include/configs/[H-N]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 5d2ebe1b3ef0055c661bb1a0d252bf252380069f |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Jul 9 21:16:53 2007 -0500 |
| |
| include/configs/[A-G]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit f55f7f8d83f36021ab1f0e3d738f5d8c8083a7e3 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Jul 9 19:12:30 2007 -0500 |
| |
| Retire CONFIG_COMMANDS finally. |
| Strip old CFG_CMD_* symbols out. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit b5501f7d720fed99ab0b42c83f5dea52868ce007 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Jul 9 19:10:03 2007 -0500 |
| |
| Update README.* to reference new CONFIG_CMD_* names now. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 4431283c7e6d54ae180d466e51bf2d97471a0ad9 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Jul 9 19:06:00 2007 -0500 |
| |
| cpu/m*: Remove obsolete references to CONFIG_COMMANDS |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 3a1ed1e1f922c419bb71f7df4949d783ade369fa |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Jul 9 18:57:22 2007 -0500 |
| |
| cpu/[7a-ln-z]*: Remove obsolete references to CONFIG_COMMANDS |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit ab3abcbabd840928fb1eb5122118ca466b5e5013 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Jul 9 18:45:16 2007 -0500 |
| |
| board/[q-z]*: Remove obsolete references to CONFIG_COMMANDS |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 3fe00109a5f12de55b6e25b1f98dfc24bc9090c9 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Jul 9 18:38:39 2007 -0500 |
| |
| board/[m-p]*: Remove obsolete references to CONFIG_COMMANDS |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit c508a4cefd8a953fc64957650506a035e6e3d9d1 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Jul 9 18:31:28 2007 -0500 |
| |
| board/[f-l]*: Remove obsolete references to CONFIG_COMMANDS |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit b9307262f8a9f3b5c9e15a6067eadc17407146f6 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Jul 9 18:24:55 2007 -0500 |
| |
| board/[d-e]*: Remove obsolete references to CONFIG_COMMANDS |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit fcec2eb93e126400009729328e797f12bc94f1fd |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Jul 9 18:19:09 2007 -0500 |
| |
| board/[A-Za-c]*: Remove obsolete references to CONFIG_COMMANDS |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit a593814f2be0c9cdc3133cd550b167b8a988328f |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Jul 9 18:10:50 2007 -0500 |
| |
| rtc/: Remove obsolete references to CONFIG_COMMANDS |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 67350568f9d46e66c21829f3513b3db0caeb948b |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Jul 9 18:05:38 2007 -0500 |
| |
| lib_{arm,avr32,blackfin,generic,i386}/: Remove obsolete references to CONFIG_COMMANDS |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 7def6b34f910f08d7ef0a14646da067719237ca2 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Jul 9 18:02:11 2007 -0500 |
| |
| lib_{m68k,microblaze,mips,ppc}/: Remove obsolete references to CONFIG_COMMANDS |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit dd60d1223b99a88a7216f3e041fe40634ad4c2bb |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Jul 9 17:56:50 2007 -0500 |
| |
| fs/: Remove obsolete references to CONFIG_COMMANDS |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit c91898bbc505aff3e12a807af88e76da18efb7ee |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Jul 9 17:46:09 2007 -0500 |
| |
| tools/: Remove obsolete references to CONFIG_COMMANDS |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 643d1ab23960950b52e0a2803c2d3ea4c558fa01 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Jul 9 17:45:14 2007 -0500 |
| |
| net/: Remove obsolete references to CONFIG_COMMANDS |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit cb51c0bf88f95a1bca68324b0126f8eed8b43273 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Jul 9 17:39:42 2007 -0500 |
| |
| drivers/[n-z]*: Remove obsolete references to CONFIG_COMMANDS |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 07d38a17e964aec4c7827f0ee9a583bc8cc1ad6b |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Jul 9 17:30:01 2007 -0500 |
| |
| drivers/[a-m]*: Remove obsolete references to CONFIG_COMMANDS |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit cde5c64d17cf4834aa7b5c373f288bc7dad27b29 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Jul 9 17:22:37 2007 -0500 |
| |
| disk/: Remove obsolete references to CONFIG_COMMANDS |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 639221c76c88215bd55af83ad174fc30d1940f8f |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Jul 9 17:15:49 2007 -0500 |
| |
| include/: Remove obsolete references to CONFIG_COMMANDS |
| Mostly removed from comments here. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 4ef218f6fdf8d747f4589da5252b004e7d2c2876 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Jul 10 00:01:28 2007 +0200 |
| |
| Coding style cleanup; update CHANGELOG. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit c8603cfbd4573379a6076c9c208545ba2bbf019a |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Jul 9 11:00:24 2007 +0200 |
| |
| Small coding style cleanup |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 0f92c7e7c9a62755b1457d3c46f93c8c1f6c19fc |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Mon Jul 9 10:10:08 2007 +0200 |
| |
| Migrate esd 405EP boards to new NAND subsystem |
| |
| Remove unused CFG_NAND_LEGACY define |
| |
| These boards to not have NAND. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit bd84ee4c2020c3a6861f4bb2e7ea0fb49f82e803 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Mon Jul 9 10:10:06 2007 +0200 |
| |
| Migrate esd 405EP boards to new NAND subsystem |
| |
| Migrate esd 405EP boards to new NAND subsystem |
| |
| -cleanup |
| -use correct io accessors (in/out_be32()) |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit e09f7ab5749c345f924da272bea0521a73af5b11 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Mon Jul 9 10:10:04 2007 +0200 |
| |
| Migrate esd 405EP boards to new NAND subsystem |
| |
| This patch prepares the migration from the legacy NAND driver |
| to U-Boot's new NAND subsystem for esd boards. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit c3517f919d0f61650cf3027fd4faf0f631142f6c |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Sun Jul 8 18:10:08 2007 -0500 |
| |
| common/* non-cmd*: Remove obsolete references to CONFIG_COMMANDS |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit fd9bcaa35be64fe41a4223fdb6ecdbad52470b39 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Sun Jul 8 18:05:39 2007 -0500 |
| |
| common/cmd_[p-x]*: Remove obsolete references to CONFIG_COMMANDS. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit c76fe47425afc7d5d670ff0539823c85d65d9c42 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Sun Jul 8 18:02:23 2007 -0500 |
| |
| common/cmd_[i-n]*: Remove obsolete references to CONFIG_COMMANDS. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit baa26db4113679b80970ff447d91cc10217742a6 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Sun Jul 8 17:51:39 2007 -0500 |
| |
| common/cmd_[af]*: Remove obsolete references to CONFIG_COMMANDS. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit af075ee96e52dda7b6bca6c937588aeaaec5f2cd |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Sun Jul 8 17:02:01 2007 -0500 |
| |
| Clear up confusion over the CMD_POST and POST_DIAG mess. |
| |
| For some reason, CONFIG_POST permeated as CONFIG_CMD_POST_DIAG |
| when it really means just CONFIG_CMD_DIAG. There is no CMD_POST. |
| Clear this mess up some. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit b3631487105a57ab7cbadfc26efbaf9676275018 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Sun Jul 8 15:45:08 2007 -0500 |
| |
| Remove references to the old cmd_confdefs.h include file. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit a22d4da95e20049b4daa1c2a022f61e8a72f2fb6 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Sun Jul 8 15:42:59 2007 -0500 |
| |
| include/configs: Catch some CONFIG_CMD_* conversion stragglers. |
| |
| Use new CONFIG_CMD_* in lwmon5.h board config file. |
| Fix CONFIG_CMD_* typo braindamage in omap1510inn.h |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit a5562901661bd428f7e5feb333f796372cb81019 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Sun Jul 8 15:31:57 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various [TUVWZYZ]* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit fe7f782d5b8c64a0195c68c31a0a11d4f641355e |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Sun Jul 8 15:02:44 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various S* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit e9a0f8f15c11f337967aa0600ad6e8af33037f50 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Sun Jul 8 15:12:40 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various R* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 12aa9fd23d724bd6ab88e1baa0db35133a27303f |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Sun Jul 8 14:55:07 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various Q* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit acf0269779422f3e147d2ddfb499c9f6ff10ad5e |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Sun Jul 8 14:49:44 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various P* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit e18a1061a8630cb67995fdf99afd3fb50d1b187d |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Sun Jul 8 14:21:43 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various [NO]* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 8353e139bfad9059c54f5b2421f1a3090e15a2e2 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Sun Jul 8 14:14:17 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various M* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 348f258f24253433e4a2302a0bbceb6740a67246 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Sun Jul 8 13:46:18 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various [IJKL]* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 6c4f4da9bfc9f9403f54fce678ed0364b7c86a6a |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Sun Jul 8 10:09:35 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various H* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 60a0876b5106b34220e459c208bbf648073306c0 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Sat Jul 7 21:04:26 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various F* and G* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit dcaa71562826a2466e894c868d132509dcda8444 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Sat Jul 7 20:56:05 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various E* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 3c3227f3c737502311b25b72084573901cbbf17d |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Sat Jul 7 20:40:43 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various D* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 49cf7e8ee7ef943fdfe866ce28410b0bfbf6a26c |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Thu Jul 5 19:52:35 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various C* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit de8b2a6e33298dcdb10bdda48db25e53c3089eba |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Thu Jul 5 19:32:07 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various B* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 498ff9a228485bd4b9f23d066bada268f9add1dd |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Thu Jul 5 19:13:52 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various A* named board config files. |
| |
| Since ADS860.h includes "board/fads/fads.h" with ramifications |
| on the CONFIG_COMMAND treatment, it too has to be adjusted to |
| exclude already configured commands in this same commit. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 10e038932f22ee80ebd53de312531e70e6590a2f |
| Author: Thomas Knobloch <knobloch@siemens.com> |
| Date: Fri Jul 6 14:58:39 2007 +0200 |
| |
| [NAND] Bad block skipping for command nboot |
| |
| The old implementation of command nboot does not support reading the image from |
| NAND flash with skipping of bad blocks. The patch implements a new version of |
| the nboot command: by calling nboot.jffs2 from the u-boot command line the |
| command will load the image from NAND flash with respect to bad blocks (by using |
| nand_read_opts()). This is similar to e.g. the NAND read command: "nand |
| read.jffs2 ...". |
| |
| Signed-off-by: Thomas Knobloch <knobloch@siemens.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 334043f601a90ac53e5ecc846fbb73a1ef38cb1f |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jul 6 12:26:51 2007 +0200 |
| |
| ppc4xx: Update lwmon5 default environment |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 5d187430a055d62f17ca84d75e7245439d1f7e75 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jul 6 11:48:24 2007 +0200 |
| |
| ppc4xx: Update lwmon5 board |
| |
| Add unlock=yes environment variable to default variables to unlock |
| the CFI flash by default. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 6b0a174a1e6f55e1f5a1fbb223cdad7645a4646e |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jul 6 09:45:47 2007 +0200 |
| |
| Fix problem with get/setdcr commands introduced by cfg patches |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit f1152f8c28db4a22087c21c618a3f7baa48e9a4f |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Fri Jul 6 02:50:19 2007 +0200 |
| |
| Code cleanup and default config update for STC GP3 SSA board. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit e4dbe1b215f5c6c462e76909d240bd96472b84de |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Thu Jul 5 17:56:27 2007 +0200 |
| |
| Fixing some typos etc. introduced mainly by cfg patches. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit b6b4684546809f89c8bac72863ca49b5fd8ac0cd |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Thu Jul 5 11:12:16 2007 +0200 |
| |
| Minor coding style cleanup. Update CHANGELOG. |
| |
| commit dca3b3d6d6396b67e5e84af53452164923c73443 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jul 4 22:33:46 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various [v-z]* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 6c18eb9804b525f3e4f3bb3d014dd69a200d9fa7 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jul 4 22:33:38 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various t* and u* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 46da1e96b7db14f4fcd2c92544e7c0862024bc76 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jul 4 22:33:30 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various s* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 90cc3eb6d2be856d9ddd81436de9cf343bc6b5c8 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jul 4 22:33:23 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various q* and r* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 26a34560d56a9df5bc2ae23525d9229736134757 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jul 4 22:33:17 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various p* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit a5cb23092a7d31490a33d4ec871468b63babfa3c |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jul 4 22:33:13 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various o* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 929a2bfd142737003a8fc32e1b86e1f2c1850257 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jul 4 22:33:07 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various n* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 5dc11a511960d490f7f01ffd746edfe6277f99b0 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jul 4 22:33:01 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various m* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 9bbb1c0820c1fbd3811ab6ee4ba0f6c6f76b27e4 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jul 4 22:32:57 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various l* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit bc234c129fa04fb9fa33530930e5cbc6084cd47a |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jul 4 22:32:51 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various j* and k* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 1d2c6bc491969f8d8fb34c8e30e8bea7a2af9c31 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jul 4 22:32:32 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various i* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 48d5d102a2f2e619c92050b9aedbb69689185bc0 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jul 4 22:32:25 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various h* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 72eb0efaed7048afcc61fc6f0085c49394b5dc36 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jul 4 22:32:19 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various g* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 1bec3d3002d3bbbae6f2468a0f7376db1120d33e |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jul 4 22:32:10 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various e* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit ab999ba1b31ebe78dd16374394a55d7c6e5aa6e4 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jul 4 22:32:03 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various d* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 37e4f24b87fa255ae456d193b7cd23c18dd1d56b |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jul 4 22:31:56 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various c* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit ba2351f9d1e841bd00ea6dad1e3c16d0259ad264 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jul 4 22:31:49 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various b* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 0b361c916617aff79e647b40f0e43361e0bbaccf |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jul 4 22:31:42 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various a* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit b730cda82e362df6a22f4c59c0a9b97e885b1014 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jul 4 22:31:35 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in mpc5xx board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit d794cfefead5fc177cf4f41164e80382e9c9484a |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jul 4 22:31:15 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various 5200 board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit ef0df52ab49eea4a30c15087fd27d54c1d946f2c |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jul 4 22:31:07 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in STx board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 866e3089bfc826bb4dc74637f8aad87a3bab79fc |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jul 4 22:30:58 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in sbc* board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 2694690e285acaa34922f55f4b5ae030da60c55a |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jul 4 22:30:50 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in TQM board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 1cc4c458329765b58e584a19821e796b3c10e976 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jul 4 22:30:28 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in 82xx board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 8ea5499afdaba0acf60923dd99001c399d4a7c8e |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jul 4 22:30:06 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in 83xx board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit b44896215a09c60fa40cae906f7ed207bbc2c492 |
| Author: Sergei Poselenov <sposelenov@emcraft.com> |
| Date: Thu Jul 5 08:17:37 2007 +0200 |
| |
| Merged POST framework with the current TOT. |
| |
| Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com> |
| |
| commit b24629fa377214d63bb40d1360e354b6d3e4af56 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jun 13 13:23:15 2007 -0500 |
| |
| mpc86xx: Remove old CFG_CMD_* references. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 46175d9764da129bb4fd341cd2554dc7d55f5b2a |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jun 13 13:22:54 2007 -0500 |
| |
| Add MPC8568MDS to MAKEALL 85xx target. |
| |
| It was missing from the original port submission. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 2835e518c969e5124ba1174eef3e8375e12fa7d5 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jun 13 13:22:08 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in 85xx board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 56b304ac2091689506088a9ae67f63fd6300cf16 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jun 13 13:21:37 2007 -0500 |
| |
| Fix #if typo in CONFIG_CMD_* changes. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit f780b83316d9af1f61d71cc88b1917b387b9b995 |
| Author: Niklaus Giger <niklausgiger@gmx.ch> |
| Date: Wed Jun 27 18:11:38 2007 +0200 |
| |
| resubmit: ppc4xx: Remove sequoia/sequioa.h. Cleanup ppc440.h for PPC440EPX |
| |
| Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com> |
| |
| commit 04e6c38b766eaa2f3287561563c9e215e0c3a0d4 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Jul 4 10:06:30 2007 +0200 |
| |
| ppc4xx: Update lwmon5 board |
| |
| - Add optional ECC generation routine to preserve existing |
| RAM values. This is needed for the Linux log-buffer support |
| - Add optional DDR2 setup with CL=4 |
| - GPIO50 not used anymore |
| - Lime register setup added |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 6810a34677dbc446334f5e451f1682426dd33b49 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Jul 3 00:17:28 2007 -0600 |
| |
| Fix Makefile to use $(MKCONFIG) macro for all board ports |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 90b1b2d69b9396ff2f01165ebc16c9a594eb5926 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Jul 3 00:17:28 2007 -0600 |
| |
| Fix Makefile to use $(MKCONFIG) macro for all board ports |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 057004f4a4863554d56cc56268bfa7c7d9738e27 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Jul 3 00:34:49 2007 -0600 |
| |
| Correct fixup relocation for mpc83xx |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 5af61b2f4b838a05f79be274f3e5a66edd2d9c96 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Jul 3 00:34:44 2007 -0600 |
| |
| Correct fixup relocation for mpc8260 |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit f3a52fe05923935db86985daf9438e2f70ac39aa |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Jul 3 00:34:39 2007 -0600 |
| |
| Correct fixup relocation for mpc824x |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit a85dd254c0577fca13627c46e93fc2ad4c4f1f00 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Jul 3 00:34:34 2007 -0600 |
| |
| Correct fixup relocation for mpc8220 |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 6f7576b20ecf0d040c3ac3b032b5cbc860e38a90 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Jul 3 00:34:29 2007 -0600 |
| |
| Correct fixup relocation for MPC5xxx |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 3649cd99ba815b6601868735765602f00ef3692b |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Jul 3 00:34:24 2007 -0600 |
| |
| Correct relocation fixup for mpc5xx |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit f82b3b6304b620ef7e28bfaa1ea887a2ad2fa325 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Jul 3 00:34:19 2007 -0600 |
| |
| Don't set gd->reloc_off if relocation of .fixup works correctly |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit e1a6144c32dc7de73bcdd33995de0148cbd0bd28 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Jul 3 00:34:14 2007 -0600 |
| |
| Remove obsolete mpc83xx linker scripts |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 17e32fc3908bf7089d3f16fc82a1c3ae674dd65b |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Jul 3 00:34:09 2007 -0600 |
| |
| Consolidate mpc8260 linker scripts |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit af7d38b393690d7eeaf418ac85a1e831a50d5fd0 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Jul 3 00:34:04 2007 -0600 |
| |
| Remove obsolete mpc824x linker scripts |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit f94a3aecebc40ca0939c7d66d010009cf51be9e2 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Jul 3 00:33:59 2007 -0600 |
| |
| Remove obsolete mpc824x linker scripts (3 of 4) |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit a71c084f3ac7fedf144537db2b2da47323068833 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Jul 3 00:33:53 2007 -0600 |
| |
| Remove obsolete mpc824x linker scripts (2 of 4) |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit f670a15468d1365241d40022b9408e1004181f5e |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Jul 3 00:33:48 2007 -0600 |
| |
| Remove obsolete mpc824x linker scripts (1 of 4) |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 09555bd45a04c0e54f172528d21bc18896550d28 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Jul 3 00:33:43 2007 -0600 |
| |
| Remove obsolete mpc8220 linker scripts |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 5efb992f046e51225c93d52f80fecbe433abd789 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Jul 3 00:33:38 2007 -0600 |
| |
| Remove obsolete mpc5xxx linker scripts (3 of 3) |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 07c13dfef65b31647e69d8b61daa1eec598add1a |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Jul 3 00:33:33 2007 -0600 |
| |
| Remove obsolete mpc5xxx linker scripts (2 of 3) |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit b4f67513a624ce85866c66c575bd2d9d7977d7f0 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Jul 3 00:33:28 2007 -0600 |
| |
| Remove obsolete mpc5xxx linker scripts (1 of 3) |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit b7d8e05f8675249b5f208aa73babeed384a4519d |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Jul 3 00:33:23 2007 -0600 |
| |
| Remove obsolete mpc5xx linker scripts |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 416a0b6d40f6eba3a2fc547253c16bda28d922f7 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Jul 3 00:33:18 2007 -0600 |
| |
| Consolidate mpc83xx linker scripts |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 5fc59175b92883ed5d2666a04e6bc49e70a4a365 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Jul 3 00:33:13 2007 -0600 |
| |
| Consolidate mpc8260 linker scripts |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 737f9eb02d7335df2b3e4d7a4d3348784d1da207 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Jul 3 00:33:08 2007 -0600 |
| |
| Consolidate mpc824x linker scripts |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 9c757b789a59a855db57b448dd825329c4e9c4a0 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Jul 3 00:33:03 2007 -0600 |
| |
| Consolidate mpc8220 linker scripts |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit d181c9a15cd41863fe24840d17848429f27d3c8c |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Jul 3 00:32:58 2007 -0600 |
| |
| Consolidate mpc5xxx linker scripts |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 287ac924adb7291bebe5086652a362a30ab28b13 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Jul 3 00:32:53 2007 -0600 |
| |
| Consolidate mpc5xx linker scripts |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 52b8704d0245e589f86d462e9ec25aeb7ecbbbdd |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Jul 4 00:43:53 2007 +0200 |
| |
| Fix a few file permission problems. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 78e0cf2de7be7f1eaeeb622eb61fd50e4d5e205c |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Jul 4 00:38:38 2007 +0200 |
| |
| Minor coding style cleanup. Rebuild CHANGELOG file. |
| |
| commit 2f9c19e496acb6bb50d9299e1aab377625d48c38 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Mon Jun 11 19:03:44 2007 -0500 |
| |
| configs/ mpc86xx: Rewrite command line options using new CONFIG_CMD-* style. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 602ad3b33d9ceef83dbab46be68646d645d637ee |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Mon Jun 11 19:03:39 2007 -0500 |
| |
| README: Rewrite command line config to use CONFIG_CMD_* names. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 72a074cec68e5bad60d63206c050974e08afd804 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Mon Jun 11 19:03:34 2007 -0500 |
| |
| include/ non-config: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). |
| |
| This is a compatibility step that allows both the older form |
| and the new form to co-exist for a while until the older can |
| be removed entirely. |
| |
| All transformations are of the form: |
| Before: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) |
| After: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 5fcf543e0b6628c76ff48705b1b0566bfd11507b |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Mon Jun 11 19:03:28 2007 -0500 |
| |
| tools/ : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). |
| |
| This is a compatibility step that allows both the older form |
| and the new form to co-exist for a while until the older can |
| be removed entirely. |
| |
| All transformations are of the form: |
| Before: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) |
| After: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 9107ebe0d352420895ab69b715697bdebc8caf50 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Mon Jun 11 19:03:23 2007 -0500 |
| |
| board/[k-z]*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). |
| |
| This is a compatibility step that allows both the older form |
| and the new form to co-exist for a while until the older can |
| be removed entirely. |
| |
| All transformations are of the form: |
| Before: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) |
| After: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 5e378003d592ea828ec69d6defcd4de79096dd5c |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Mon Jun 11 19:03:19 2007 -0500 |
| |
| board/[Ma-i]*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). |
| |
| This is a compatibility step that allows both the older form |
| and the new form to co-exist for a while until the older can |
| be removed entirely. |
| |
| All transformations are of the form: |
| Before: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) |
| After: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 737184114ec9c9e0ab94d6713536126073bd2472 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Mon Jun 11 19:03:15 2007 -0500 |
| |
| cpu/ non-mpc*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). |
| |
| This is a compatibility step that allows both the older form |
| and the new form to co-exist for a while until the older can |
| be removed entirely. |
| |
| All transformations are of the form: |
| Before: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) |
| After: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit f48070fe5fe440dfb5ee5268c920de70e48ea327 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Mon Jun 11 19:03:08 2007 -0500 |
| |
| cpu/mpc*/ : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). |
| |
| This is a compatibility step that allows both the older form |
| and the new form to co-exist for a while until the older can |
| be removed entirely. |
| |
| All transformations are of the form: |
| Before: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) |
| After: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 0c505db0a0dc1f670b13ce3b4d3fbf1ec5b3cbd2 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Mon Jun 11 19:03:03 2007 -0500 |
| |
| lib_*/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). |
| |
| This is a compatibility step that allows both the older form |
| and the new form to co-exist for a while until the older can |
| be removed entirely. |
| |
| All transformations are of the form: |
| Before: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) |
| After: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 73f032021ec5f13cda8faa4e34b6de80960eb86f |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Mon Jun 11 19:02:58 2007 -0500 |
| |
| lib_ppc/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). |
| |
| This is a compatibility step that allows both the older form |
| and the new form to co-exist for a while until the older can |
| be removed entirely. |
| |
| All transformations are of the form: |
| Before: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) |
| After: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 98b79003c21c2578206003256de4e781d6b36ca8 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Mon Jun 11 19:02:53 2007 -0500 |
| |
| rtc/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). |
| |
| This is a compatibility step that allows both the older form |
| and the new form to co-exist for a while until the older can |
| be removed entirely. |
| |
| All transformations are of the form: |
| Before: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) |
| After: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 6e2115acb6a892d53a6881bf253ae41d3df39156 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Mon Jun 11 19:02:49 2007 -0500 |
| |
| net/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). |
| |
| This is a compatibility step that allows both the older form |
| and the new form to co-exist for a while until the older can |
| be removed entirely. |
| |
| All transformations are of the form: |
| Before: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) |
| After: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 45cdb9b72c94655c7308b464a2666057c0b286e0 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Mon Jun 11 19:02:34 2007 -0500 |
| |
| disk/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). |
| |
| This is a compatibility step that allows both the older form |
| and the new form to co-exist for a while until the older can |
| be removed entirely. |
| |
| All transformations are of the form: |
| Before: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) |
| After: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 4e109ae98294a5ca7ff848b7652c7bfd4023a94a |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Mon Jun 11 19:02:20 2007 -0500 |
| |
| fs/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). |
| |
| This is a compatibility step that allows both the older form |
| and the new form to co-exist for a while until the older can |
| be removed entirely. |
| |
| All transformations are of the form: |
| Before: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) |
| After: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit d5be43de93ff905c465e509d45a3164ef48d26e7 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Mon Jun 11 19:02:10 2007 -0500 |
| |
| drivers/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). |
| |
| This is a compatibility step that allows both the older form |
| and the new form to co-exist for a while until the older can |
| be removed entirely. |
| |
| All transformations are of the form: |
| Before: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) |
| After: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit b453960d4fdb87b3970d96119b90df2ed024fc4a |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Mon Jun 11 19:02:05 2007 -0500 |
| |
| common/ non-cmd: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). |
| |
| This is a compatibility step that allows both the older form |
| and the new form to co-exist for a while until the older can |
| be removed entirely. |
| |
| All transformations are of the form: |
| Before: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) |
| After: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 65c450b47a62659d522cfa8f4fa1e4e5c60dccd0 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Mon Jun 11 19:01:54 2007 -0500 |
| |
| common/cmd_[i-z]* : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). |
| |
| This is a compatibility step that allows both the older form |
| and the new form to co-exist for a while until the older can |
| be removed entirely. |
| |
| All transformations are of the form: |
| Before: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) |
| After: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit a76adc8142c1d956385a109e0b70f9319ede4d66 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Mon Jun 11 19:01:43 2007 -0500 |
| |
| common/cmd_[a-f]* : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). |
| |
| This is a compatibility step that allows both the older form |
| and the new form to co-exist for a while until the older can |
| be removed entirely. |
| |
| All transformations are of the form: |
| Before: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) |
| After: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit ec63b10b61fd68238d4c15c1cd04c0b38228e2c1 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Mon Jun 11 19:01:34 2007 -0500 |
| |
| Introduce initial versions of new Command Config files. |
| |
| Derive three new files from cmd_confdefs.h: |
| config_bootp.h - Has BOOTP related config options, not commands |
| config_cmd_all.h - Has a CONFIG_CMD_* definition for every command |
| config_cmd_default.h - Has a CONFIG_CMD_* definition for default cmds. |
| |
| For now, include "config_bootp.h" for compatability until all |
| users of it directly include it properly. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 1f2a05898658900dc5717761e27abf2052e67e13 |
| Author: Mushtaq Khan <mushtaqk_921@yahoo.co.in> |
| Date: Sat Jun 30 18:50:48 2007 +0200 |
| |
| Fix S-ATA support. |
| |
| Signed-off-by: mushtaq khan <mushtaqk_921@yahoo.co.in> |
| |
| commit a5d71e290f3673269be8eefb4ec44f53412f9461 |
| Author: Heiko Schocher <hs@pollux.denx.de> |
| Date: Mon Jun 25 19:11:37 2007 +0200 |
| |
| [PCS440EP] get rid of CONFIG_PPC4xx_USE_SPD_DDR_INIT_HANG |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit a1bd6200eccd3a02040a955d5f43d3ee1fc9f93b |
| Author: Niklaus Giger <niklaus.giger@nestal.com> |
| Date: Mon Jun 25 17:03:13 2007 +0200 |
| |
| ppc4xx: PPC440EPx Emit DDR0 registers on machine check interrupt |
| |
| This patch prints the DDR status registers upon machine check |
| interrupt on the 440EPx/GRx. This can be useful especially when |
| ECC support is enabled. |
| |
| I added some small changes to the original patch from Niklaus to |
| make it compile clean. |
| |
| Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 807018fb7faceb429ce0cb47baa2073746b33a4e |
| Author: Niklaus Giger <niklaus.giger@nestal.com> |
| Date: Mon Jun 25 16:50:55 2007 +0200 |
| |
| ppc4xx: Fix O=buildir builds |
| |
| This patch fixes the problem to assemble cpu/ppc4xx/start.S |
| experienced last week where building failed having specified |
| O=../build.sequoia. |
| |
| Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com> |
| |
| commit 466fff1a7bb5fe764a06450626f6098219f446b8 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Jun 25 15:57:39 2007 +0200 |
| |
| ppc4xx: Add pci_pre_init() for 405 boards |
| |
| This patch removes the CFG_PCI_PRE_INIT option completely, since |
| it's not needed anymore with the patch from Matthias Fuchs with |
| the "weak" pci_pre_init() implementation. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 6f35c53166213c24a5a0e2390ed861136ff73870 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Sun Jun 24 17:41:21 2007 +0200 |
| |
| ppc4xx: Maintenance patch for esd's CPCI405 derivats |
| |
| -add pci_pre_init() for pci interrupt fixup code |
| -disable phy sleep mode via reset_phy() function |
| -use correct io accessors |
| -cleanup |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit 5a1c9ff0c44305b57cb4d8f9369bba90bcf0e1f8 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Sun Jun 24 17:23:41 2007 +0200 |
| |
| ppc4xx: Add pci_pre_init() for 405 boards |
| |
| This patch adds support for calling a plattform dependant |
| pci_pre_init() function for 405 boards. This can be used to |
| move the current pci_405gp_fixup_irq() function into the |
| board code. |
| |
| This patch also makes the CFG_PCI_PRE_INIT define obsolete. |
| A default function with 'weak' attribute is used when |
| a board specific pci_pre_init() is not implemented. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit 1636d1c8529c006d106287cfbc20cd0a246fe1cb |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Fri Jun 22 23:59:00 2007 +0200 |
| |
| Coding stylke cleanup; rebuild CHANGELOG |
| |
| commit 2dc64451b4c08ffd619372abfdc2506a2e2363b9 |
| Author: Igor Lisitsin <igor@emcraft.com> |
| Date: Wed Apr 18 14:55:19 2007 +0400 |
| |
| Adapt log buffer code to support Linux 2.6 |
| |
| A new environment variable, "logversion", selects the log buffer |
| behaviour. If it is not set or set to a value other than 2, then the |
| old, Linux 2.4.4, behaviour is selected. |
| |
| Signed-off-by: Igor Lisitsin <igor@emcraft.com> |
| -- |
| |
| commit a11e06965ec91270c51853407ff1261d3c740386 |
| Author: Igor Lisitsin <igor@emcraft.com> |
| Date: Wed Mar 28 19:06:19 2007 +0400 |
| |
| Extend POST support for PPC440 |
| |
| Added memory, CPU, UART, I2C and SPR POST tests for PPC440. |
| |
| Signed-off-by: Igor Lisitsin <igor@emcraft.com> |
| -- |
| |
| commit 566a494f592ae3b3c0785d90d4e1ba45574880c4 |
| Author: Heiko Schocher <hs@pollux.denx.de> |
| Date: Fri Jun 22 19:11:54 2007 +0200 |
| |
| [PCS440EP] upgrade the PCS440EP board: |
| - Show on the Status LEDs, some States of the board. |
| - Get the MAC addresses from the EEProm |
| - use PREBOOT |
| - use the CF on the board. |
| - check the U-Boot image in the Flash with a SHA1 |
| checksum. |
| - use dynamic TLB entries generation for the SDRAM |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit 3a1f5c81b0b9557817a789bece839905581c2205 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jun 22 16:58:40 2007 +0200 |
| |
| ppc4xx: Fix problem with extended program_tlb() funtion |
| |
| The recently extended program_tlb() function had a problem when |
| multiple TLB's had to be setup (for example with 512MB of SDRAM). The |
| virtual address was not incremented. This patch fixes this issue |
| and is tested on Katmai with 512MB SDRAM. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 02032e8f14751a1a751b09240a4f1cf9f8a2077f |
| Author: Rafal Jaworowski <raj@semihalf.com> |
| Date: Fri Jun 22 14:58:04 2007 +0200 |
| |
| [ppc] Fix build breakage for all non-4xx PowerPC variants. |
| |
| - adapt to the more generic EXCEPTION_PROLOG and CRIT_EXCEPTION macros |
| - minor 4xx cleanup |
| |
| commit d677b32855f577ae2690dcd64a172cdd706e0ffc |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Fri Jun 22 10:34:12 2007 +0200 |
| |
| [patch] add nand_init() prototype to nand.h |
| |
| since nand_init() is expected to be called by other parts of u-boot, there |
| should be a prototype for it in nand.h |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 83b4cfa3d629dff0264366263c5e94d9a50ad80b |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Jun 20 18:14:24 2007 +0200 |
| |
| Coding style cleanup. Refresh CHANGELOG. |
| |
| commit b3f9ec86e388207fd03dcdf7b145b9ed080bf024 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Jun 19 17:22:44 2007 +0200 |
| |
| ppc4xx: Add bootstrap command for AMCC Sequoia (440EPx) eval board |
| |
| This patch adds a board command to configure the I2C bootstrap EEPROM |
| values. Right now 533 and 667MHz are supported for booting either via NOR |
| or NAND FLASH. Here the usage: |
| |
| => bootstrap 533 nor ;to configure the board for 533MHz NOR booting |
| => bootstrap 667 nand ;to configure the board for 667MHz NNAND booting |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit df8a24cdd30151505cf57bbee5289e91bf53bd1b |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Jun 19 16:42:31 2007 +0200 |
| |
| [ppc4xx] Fix problem with NAND booting on AMCC Acadia |
| |
| The latest changes showed a problem with the location of the NAND-SPL |
| image in the OCM and the init-data area (incl. cache). This patch |
| fixes this problem. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 86ba99e34194394052d24c04dc40d1263d29a26f |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Jun 19 16:40:58 2007 +0200 |
| |
| [ppc4xx] Change board/amcc/acadia/cpr.c to pll.c |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 8e585f02f82c17cc66cd229dbf0fd3066bbbf658 |
| Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Date: Mon Jun 18 13:50:13 2007 -0500 |
| |
| Added M5329AFEE and M5329BFEE Platforms |
| |
| Added board/freescale/m5329evb, cpu/mcf532x, drivers/net, |
| drivers/serial, immap_5329.h, m5329.h, mcfrtc.h, |
| include/configs/M5329EVB.h, lib_m68k/interrupts.c, and |
| rtc/mcfrtc.c |
| |
| Modified CREDITS, MAKEFILE, Makefile, README, common/cmd_bdinfo.c, |
| common/cmd_mii.c, include/asm-m68k/byteorder.h, include/asm-m68k/fec.h, |
| include/asm-m68k/io.h, include/asm-m68k/mcftimer.h, |
| include/asm-m68k/mcfuart.h, include/asm-m68k/ptrace.h, |
| include/asm-m68k/u-boot.h, lib_m68k/Makefile, lib_m68k/board.c, |
| lib_m68k/time.c, net/eth.c and rtc/Makefile |
| |
| Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 093172f08d6afb3f34d8a2f26ee0ee874261cf27 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Sun Jun 17 19:04:11 2007 +0200 |
| |
| [fix] email reparation |
| |
| commit 3666afffe7baf859c6ae0ce2bebbc8ab7e512ddc |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Sun Jun 17 19:03:21 2007 +0200 |
| |
| [FIX] fix microblaze file permitission |
| |
| commit e73846b7cf1e29ae635bf9bb5570269663df2ee5 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jun 15 11:33:41 2007 +0200 |
| |
| [ppc4xx] Change lwmon5 port to work with recent 440 exception rework |
| |
| Now CONFIG_440 has to be defined in all PPC440 board config files. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit efa35cf12d914d4caba942acd5a6c45f217de302 |
| Author: Grzegorz Bernacki <gjb@semihalf.com> |
| Date: Fri Jun 15 11:19:28 2007 +0200 |
| |
| ppc4xx: Clean up 440 exceptions handling |
| |
| - Introduced dedicated switches for building 440 and 405 images required |
| for 440-specific machine instructions like 'rfmci' etc. |
| |
| - Exception vectors moved to the proper location (_start moved away from |
| the critical exception handler space, which it occupied) |
| |
| - CriticalInput now serviced (with default handler) |
| |
| - MachineCheck properly serviced (added a dedicated handler and return |
| subroutine) |
| |
| - Overall cleanup of exceptions declared with STD_EXCEPTION macro (unused, |
| unhandled and those not relevant for 4xx were eliminated) |
| |
| - Eliminated Linux leftovers, removed dead code |
| |
| Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> |
| Signed-off-by: Rafal Jaworowski <raj@semihalf.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit b765ffb773f5a3cd5aa94ec76b6a05276b8cd5b2 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jun 15 08:18:01 2007 +0200 |
| |
| [ppc4xx] Add initial lwmon5 board support |
| |
| This patch adds initial support for the Liebherr lwmon5 board euqipped |
| with an AMCC 440EPx PowerPC. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 85f737376d5ff3d5f0d45a8b657686326d175307 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jun 15 07:39:43 2007 +0200 |
| |
| [ppc4xx] Extend 44x GPIO setup with default output state |
| |
| The board config array CFG_440_GPIO_TABLE for the ppc440 GPIO setup |
| is extended with the default GPIO output state (level). |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit dbca208518e5e7f01a6420588d1cd6e60db74c2b |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Jun 14 11:14:32 2007 +0200 |
| |
| [ppc4xx] Extend program_tlb() with virtual & physical addresses |
| |
| Now program_tlb() allows to program a TLB (or multiple) with |
| different virtual and physical addresses. With this change, now one |
| physical region (e.g. SDRAM) can be mapped 2 times, once with caches |
| diabled and once with caches enabled. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 9912121f7ed804ea58fd62f3f230b5dcfc357d88 |
| Author: Detlev Zundel <dzu@denx.de> |
| Date: Wed May 23 19:02:41 2007 +0200 |
| |
| Change 'repeatable' attribute of some commands to sensible values. |
| |
| Most prominently this changes 'erase' to be non-repeatable. |
| |
| Signed-off-by: Detlev Zundel <dzu@denx.de> |
| |
| commit 5afb202093f6a001797db92cf695b93a70ea9ab4 |
| Author: Detlev Zundel <dzu@denx.de> |
| Date: Wed May 23 18:47:48 2007 +0200 |
| |
| Fix 'run' not to continue after interrupted command |
| |
| Signed-off-by: Detlev Zundel <dzu@denx.de> |
| |
| commit 9b7464a2c88614e1061f509c48930a3d240d1a35 |
| Author: Jason Jin <Jason.jin@freescale.com> |
| Date: Mon Jun 11 15:14:24 2007 +0200 |
| |
| USB: This patch fix readl in ohci swap reg access. |
| |
| Signed-off-by: Jason Jin <Jason.jin@freescale.com> |
| |
| commit 8f8416fada9faf94b9a92f21fe6000643cb521d5 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Fri Jun 8 14:52:22 2007 +0200 |
| |
| TQM5200: Add Flat Device Tree support, update default env. accordingly. |
| |
| Signed-off-by: Jan Wrobel <wrr@semihalf.com> |
| Acked-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit 9045f33c023f698660a2e45d1b2194c0711abebc |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Fri Jun 8 10:24:58 2007 +0200 |
| |
| Fix config problems on SC3 board; make ide_reset_timeout work. |
| |
| commit fba3fb0449b8a54542aed1e729de76e7f5a2ff1b |
| Author: Benoît Monin <bmonin@adeneo.eu> |
| Date: Fri Jun 8 09:55:24 2007 +0200 |
| |
| [PATCH] fix gpio setting when using CFG_440_GPIO_TABLE |
| |
| Set the correct value in GPIOx_TCR when configuring the gpio |
| with CFG_440_GPIO_TABLE. |
| |
| Signed-off-by: Benoit Monin <bmonin@adeneo.eu> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit f539edc076cfe52bff919dd512ba8d7af0e22092 |
| Author: Vadim Bendebury <vbendeb@google.com> |
| Date: Thu May 24 15:52:25 2007 -0700 |
| |
| cosmetic changes to bcm570x driver |
| |
| This is a cosmetic only changes submission. |
| It affects files relevant to bcm570x driver. |
| the commands used to generate this change was |
| |
| cd drivers |
| Lindent -pcs -l80 bcm570x.c bcm570x_lm.h bcm570x_mm.h tigon3.c tigon3.h |
| |
| The BMW target (the only one using this chip so far) builds cleanly, the |
| `before and after' generated object files for drivers/bcm570x.c and |
| drivers/tigon3.o are identical as reported by objdump -d |
| |
| Signed-off-by: Vadim Bendebury <vbendeb@google.com> |
| Signed-off-by: Ben Warren <bwarren@qstreams.com> |
| |
| commit 725671ccd2cd04c9ebc50c9e5a94dd8cbade66b7 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Jun 6 16:26:56 2007 +0200 |
| |
| Coding Style cleanup; generate new CHANGELOG file. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 19d763c35e0b5568eaf0b8adbf7a68ccfe7fa243 |
| Author: Markus Klotzbuecher <mk@denx.de> |
| Date: Wed Jun 6 11:49:44 2007 +0200 |
| |
| TRAB, USB: update trab board configuration for use of generic ohci driver |
| |
| commit dace45acd1c1357daa9322099d07c9a9e08b0024 |
| Author: Markus Klotzbuecher <mk@denx.de> |
| Date: Wed Jun 6 11:49:43 2007 +0200 |
| |
| USB: ohci fixes and cleanup for ppc4xx and yosemite board. |
| |
| commit 72657570b61635c74fa0c3f0e9e7d0671a9d08df |
| Author: Markus Klotzbuecher <mk@denx.de> |
| Date: Wed Jun 6 11:49:43 2007 +0200 |
| |
| USB: ohci fixes and cleanup for mpc5xxx and IceCube board config |
| |
| commit fc43be478f2aa37ce38acd85355038866e4162af |
| Author: Markus Klotzbuecher <mk@denx.de> |
| Date: Wed Jun 6 11:49:35 2007 +0200 |
| |
| USB/OHCI: endianness cleanup in the generic ohci driver |
| |
| commit c440bfe6d6d92d66478a7e84402b31f48413617b |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Jun 6 11:42:13 2007 +0200 |
| |
| ppc4xx: Add NAND booting support for AMCC Acadia (405EZ) eval board |
| |
| This patch adds NAND booting support for the AMCC Acadia eval board. |
| |
| Please make sure to configure jumper J7 to position 2-3 when booting |
| from NOR, and to position 1-2 when booting for NAND. |
| |
| I also added a board command to configure the I2C bootstrap EEPROM |
| values. Right now only 267MHz is support for booting either via NOR |
| or NAND FLASH. Here the usage: |
| |
| => bootstrap 267 nor ;to configure the board for 267MHz NOR booting |
| => bootstrap 267 nand ;to configure the board for 267MHz NNAND booting |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 18135125f909948b85d1d6881ab4ac0efb4a1c58 |
| Author: Rodolfo Giometti <giometti@linux.it> |
| Date: Wed Jun 6 10:08:14 2007 +0200 |
| |
| Files include/linux/byteorder/{big,little}_endian.h define |
| __BIG_ENDIAN and __LITTLE_ENDIAN. |
| |
| Signed-off-by: Rodolfo Giometti <giometti@linux.it> |
| |
| commit a81d1c0b85b13e9d45f2d87de96a51a6e0ef0f82 |
| Author: Zhang Wei <wei.zhang@freescale.com> |
| Date: Wed Jun 6 10:08:14 2007 +0200 |
| |
| Add USB PCI-OHCI, USB keyboard and event poll support to the |
| MPC8641HPCN board config file. |
| |
| Signed-off-by: Zhang Wei <wei.zhang@freescale.com> |
| |
| commit 4dae14ce8fbdf380017dc54f172218e7d2acc889 |
| Author: Zhang Wei <wei.zhang@freescale.com> |
| Date: Wed Jun 6 10:08:14 2007 +0200 |
| |
| USB PCI-OHCI, interrupt pipe and usb event poll support |
| |
| This patch added USB PCI-OHCI chips support, interrupt pipe support |
| and usb event poll support. For supporting the USB interrupt pipe, the |
| globe urb_priv is moved to purb in ed struct. Now, we can process |
| several urbs at one time. The interrupt pipe support codes are ported |
| from Linux kernel 2.4. |
| |
| Signed-off-by: Zhang Wei <wei.zhang@freescale.com> |
| |
| commit fdcfaa1b02268b2899e374b35adf936c911a47eb |
| Author: Zhang Wei <wei.zhang@freescale.com> |
| Date: Wed Jun 6 10:08:13 2007 +0200 |
| |
| USB event poll support |
| |
| This patch adds USB event poll support, which could be used in usbkbd |
| and other usb devices driver when the asynchronous interrupt |
| processing is supported. |
| |
| Signed-off-by: Zhang Wei <wei.zhang@freescale.com |
| |
| commit 9a1d00fa47c1e05e3fdb60b33213af4e18d4c18e |
| Author: Rodolfo Giometti <giometti@linux.it> |
| Date: Wed Jun 6 10:08:12 2007 +0200 |
| |
| ISP116x: delay for crappy USB keys |
| |
| Using some (very) slow USB keys cause the USB host controller buffers |
| are not ready to be read by the CPU so we need an extra delay before |
| reading the USB storage data. |
| |
| Signed-off-by: Rodolfo Giometti <giometti@linux.it> |
| |
| commit 09444143670c9c2243cb7aba9f70b3713d33bed1 |
| Author: Markus Klotzbuecher <mk@denx.de> |
| Date: Wed Jun 6 10:08:12 2007 +0200 |
| |
| Change duplicate usb_cpu_init_fail to usb_board_init_fail |
| |
| Thanks to Liew Tsi Chung <Tsi-chung.Liew@freescale.com> for pointing |
| this out. |
| |
| Signed-off-by: Markus Klotzbuecher <mk@denx.de> |
| |
| commit 32922cdc470fdfd39bea0c1c4f582d3fb340421e |
| Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Date: Tue Jun 5 12:30:52 2007 -0500 |
| |
| mpc8641 image size cleanup |
| |
| e600 does not have a bootpg restriction. |
| Move the version string to beginning of image at fff00000. |
| Resetvec.S is not needed. |
| Update flash copy instructions. |
| Add tftpflash env variable |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit e3cbe1f93c5722f8ebbad468e30c069a2b511097 |
| Author: Benoît Monin <bmonin@adeneo.eu> |
| Date: Mon Jun 4 08:36:05 2007 +0200 |
| |
| [PATCH] Fix ppc4xx bootstrap letter displayed on startup |
| |
| The attached patch is mainly cosmetic, allowing u-boot to |
| display the correct bootstrap option letter according to the |
| datasheets. |
| |
| The original patch was extended with 405EZ support by Stefan |
| Roese. |
| |
| Signed-off-by: Benoit Monin <bmonin@adeneo.eu> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 5b1313fb2758ffce8b624457f777d8cc6709608d |
| Author: Nikita V. Youshchenko <yoush@debian.org> |
| Date: Wed May 23 12:45:19 2007 +0400 |
| |
| fix compilation problem for mpc8349itx CFG_RAMBOOT |
| |
| Current include/configs/MPC8349ITX.h does contain some support for building |
| image that will be started from memory (without putting in into flash). |
| It could be triggered by building with TEXT_BASE set to a low value. |
| |
| However, this support is incomplete: using of low TEXT_BASE causes |
| defining configuration macros in inconsistent way, which later leads |
| to compilation errors. In particular. flash support is being disabled, |
| but then flash structures get referenced. |
| |
| This patch fixes this, making it possible to build with low TEXT_BASE. |
| |
| Signed-Off-By: Nikita Youshchenko <yoush@debian.org> |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 8a364f0970de49949d635e60accf463c6443ef8c |
| Author: Nikita V. Youshchenko <yoush@debian.org> |
| Date: Wed May 23 12:45:25 2007 +0400 |
| |
| add missing 'console' var to default mpc8349itx config |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 18d156eb37c90fadc8ec7a81a3b89176161f85b7 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jun 1 16:18:17 2007 +0200 |
| |
| ppc4xx: Add missing file for Bamboo NAND booting support |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 155a96478a0881e6da96cbbbcf34952d6a3b1b4b |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jun 1 15:58:19 2007 +0200 |
| |
| ppc4xx: Undo Sequoia patch for dynamic EBC speed support of 83MHz |
| |
| This patch undoes the patch by Jeff Mann with commit-id ada4697d. As |
| suggested by AMCC it is not recommended to dynamically change the EBC |
| speed after bootup. So we undo this change to be on the safe side. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 9d9096043e8f713d4bf1743d32e1459e6a11644b |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jun 1 15:29:04 2007 +0200 |
| |
| ppc4xx: Update Sequoia NAND booting support with ECC |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit cf959c7d6687567c308e366e9581e1a5aff5cc5b |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jun 1 15:27:11 2007 +0200 |
| |
| ppc4xx: Add NAND booting support for AMCC Bamboo (440EP) eval board |
| |
| This patch adds NAND booting support for the AMCC Bamboo eval board. |
| Since the NAND-SPL boot image is limited to 4kbytes, this version |
| only supports the onboard 64MBytes of DDR. The DIMM modules can't be |
| supported, since the setup code for I2C DIMM autodetection and |
| configuration is too big for this NAND bootloader. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 42be56f53c8b107868e6125c8524ae84293e95a7 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jun 1 15:23:04 2007 +0200 |
| |
| NAND: Add ECC support to NAND booting support in nand_spl/nand_boot.c |
| |
| The U-Boot NAND booting support is now extended to support ECC |
| upon loading of the NAND U-Boot image. |
| |
| Tested on AMCC Sequoia (440EPx) and Bamboo (440EP). |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit a471db07fbb65a841ffc9f4f112562b945230f98 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jun 1 15:19:29 2007 +0200 |
| |
| ppc4xx: Prepare Bamboo port for NAND booting support |
| |
| This patch updates the "normal" Bamboo NOR booting port, so |
| that it is compatible with the coming soon NAND booting |
| Bamboo port. |
| |
| It also enables the 2nd NAND flash on the Bamboo. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 53ad02103fb8be4138a9937a8ab91fcdff7b4987 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jun 1 15:16:58 2007 +0200 |
| |
| ppc4xx: Update in_be32() functions and friends to latest Linux version |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 91da09cfbce0c1de05d6d84aa8363d666fa7ea3c |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jun 1 15:15:12 2007 +0200 |
| |
| NAND: Add hardware ECC support to the PPC4xx NAND driver ndfc.c |
| |
| This patch adds hardware ECC support to the NDFC driver. It also |
| changes the register access from using the "simple" in32/out32 |
| functions to the in_be32/out_be32 functions, which make sure |
| that the access is correctly synced. This is the only recommended |
| access to SoC registers in the current Linux kernel. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 17b5e862287cca76f19dcf8b741e61a7d06617f2 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jun 1 15:12:15 2007 +0200 |
| |
| NAND: Update nand_ecc.c to latest Linux version |
| |
| This patch updates the nand_ecc code to the latest Linux version. |
| The main reason for this is the more compact code. This makes |
| it possible to include the ECC code into the NAND bootloader |
| image (NAND_SPL) for PPC4xx. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit d2d432760d2199d0e8558fdd9d1789b8131abcf7 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jun 1 15:09:50 2007 +0200 |
| |
| ppc4xx: 44x DDR driver code cleanup and small fix for Bamboo |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit e4bbed2803a2ad0521c7362f5d3e065f99abaedc |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jun 1 13:45:24 2007 +0200 |
| |
| ppc4xx: Change Luan config file to support ECC |
| |
| With the updated 44x DDR2 driver the Luan board now supports |
| ECC generation and checking. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 7187db73491c8de0fb56efb5e5134ba5ec443089 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jun 1 13:45:00 2007 +0200 |
| |
| ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe) |
| |
| Add config option for 180 degree advance clock control as needed |
| for the AMCC Luan eval board. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit ee1529838abbfaa35f14e3ffbeaaba693159475f |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Thu May 31 17:20:09 2007 +0200 |
| |
| Add support for STX GP3SSA (stxssa) Board with 4 MiB flash. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 7049288fb1f16f1b317140226cdebd07bd416395 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Sun May 27 17:26:46 2007 +0200 |
| |
| Motion-PRO: Code cleanup, fix of a typo in OF_STDOUT_PATH. |
| |
| Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit 4520fd4d2c450da49637216aa0e53739b61c60ac |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Sun May 27 17:06:36 2007 +0200 |
| |
| Motion-PRO: Add support for redundant environment. |
| |
| Enable redundant environment, add a MTD partition for it; also add env. |
| variable command for passing MTD partitions to the kernel command line. |
| |
| Signed-off-by: Piotr Kruszynski <ppk@semihalf.com> |
| Acked-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit a26eabeec31746f06d309103690892805696e344 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Sun May 27 17:05:11 2007 +0200 |
| |
| Motion-PRO: Change maximum console buffer size from 256 to 1024 bytes. |
| |
| Allow passing longer command line to the kernel - useful especially |
| for passing MTD partition layout. |
| |
| Signed-off-by: Piotr Kruszynski <ppk@semihalf.com> |
| Acked-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit 9160b96f71483a116de81c68985e8ee306d36764 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Sun May 27 17:04:18 2007 +0200 |
| |
| Fix: Add missing NULL termination in strings expanded by macros parser. |
| |
| Signed-off-by: Piotr Kruszynski <ppk@semihalf.com> |
| Acked-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit 630ec84aef7228fc1dbfb38dec78541403a786cd |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Sun May 27 17:03:37 2007 +0200 |
| |
| Motion-PRO: Update EEPROM's page write bits and write delay. |
| |
| Change EEPROM configuration according to the datasheet: "The 24C01A and 24C02A |
| have a page write capability of two bytes", and "This device offers fast (1ms) |
| byte write". Add 3ms of extra delay. |
| |
| Signed-off-by: Piotr Kruszynski <ppk@semihalf.com> |
| Acked-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit c00125e07c1ebc125bab40e1e18bceed8be0c162 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Sun May 27 16:58:45 2007 +0200 |
| |
| MPC5XXX, Motion-PRO: Fix PHY initialization problem. |
| |
| After being reset in mpc5xxx_fec_init_phy(), PHY goes into FX mode, in which |
| networking does not function. This commit switches PHY to TX mode by clearing |
| the FX_SEL bit of Mode Control Register. It also reverses commit |
| 008861a2f3ef2c062744d733787c7e530a1b8761, i.e., a temporary workaround. |
| |
| Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> |
| Acked-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit 93b78f534a6e708b4cf1a4ffb4d8438c67a007db |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Sun May 27 16:57:15 2007 +0200 |
| |
| Motion-PRO: Add support for the temperature sensor. |
| |
| Signed-off-by: Piotr Kruszynski <ppk@semihalf.com> |
| Acked-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit c75e639630cc132dc19cd1ecda5922c0db0bfbba |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Sun May 27 16:55:23 2007 +0200 |
| |
| Motion-PRO: Add displaying of CPLD revision information during boot. |
| |
| Signed-off-by: Jan Wrobel <wrr@semihalf.com> |
| Acked-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit c99512d6bd3973f01ca2fc4896d829b46e68f150 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Sun May 27 16:53:43 2007 +0200 |
| |
| MPC5xxx: Change names of defines related to IPB and PCI clocks. |
| |
| Both CFG_PCISPEED_66 and CFG_IPBSPEED_133 are misnamed, as defining |
| them does not cause PCI or IPB clocks to run at the specified speed. |
| Instead, they configure divisors used to calculate said clocks. This |
| patch renames the defines according to their real function. |
| |
| Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> |
| Acked-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit a11c0b85dc3664bb3c1e781137118730c8f619ab |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Sun May 27 16:51:48 2007 +0200 |
| |
| Motion-PRO: Add LED support. |
| |
| Signed-off-by: Jan Wrobel <wrr@semihalf.com> |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| Acked-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit 7ebb4479b07ff294eb4d76e420753a0349f7c93b |
| Author: Ulf Samuelsson <ulf@atmel.com> |
| Date: Thu May 24 12:12:47 2007 +0200 |
| |
| [PATCH][NAND] Define the Vendor Id for Micron NAND Flash |
| |
| Signed-off-by: Ulf Samuelsson <ulf@atmel.com> |
| Signed-off-by: Ladislav Michl <ladis@linux-mips.org> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit d756894722c888d09a9fa1df8323753772d3dcce |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu May 24 09:49:00 2007 +0200 |
| |
| ppc4xx: Fix small 405EZ OCM initilization bug in start.S |
| |
| As pointed out by Bruce Adler <bruce.adler@acm.org> this patch |
| fixes a small bug in the 405EZ OCM initialization. Thanks for |
| spotting. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 5d4a179013d59a76446462e1eb0a969fba63eb81 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu May 24 08:22:09 2007 +0200 |
| |
| ppc4xx: Update AMCC Acadia support for board revision 1.1 |
| |
| This patch updates the Acadia (405EZ) support for the new 1.1 board |
| revision. It also adds support for NAND FLASH via the 4xx NDFC. |
| |
| Please note that the jumper J7 must be in position 2-3 for this |
| NAND support. Position 1-2 is for NAND booting only. NAND booting |
| support will follow later. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 822d55365bb557e084d0e33625a6dedcc866110b |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Wed May 23 14:09:46 2007 -0500 |
| |
| Add LIST_86xx MAKEALL target for PowerPC builds. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 9f0077abd69f7a7c756a915b961037302be3e6f2 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue May 22 12:48:09 2007 +0200 |
| |
| ppc4xx: Use do { ... } while (0) for CPR & SDR access macros |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 6f3dfc139a838b0841c151efe00ad47db2366e79 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue May 22 12:46:10 2007 +0200 |
| |
| ppc4xx: Add 405 support to 4xx NAND driver ndfc.c |
| |
| This patch adds support for 405 PPC's to the 4xx NAND driver |
| ndfc.c. This is in preparation for the new AMCC 405EZ. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 10603d76767426be803dadd4fb688b97eb69481c |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon May 21 07:41:22 2007 +0200 |
| |
| ppc4xx: Fix problem in 405EZ OCM initialization |
| |
| As spotted by Bruce Adler this patch fixes an initialization problem |
| for the 405EZ OCM. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 3e3b956906eba9e4ad7931581ecedaad10eccce8 |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Fri May 18 16:47:03 2007 +0100 |
| |
| Reduce line lengths to 80 characters max. |
| |
| commit 93ef45c9ddfdd9fc17c4e74bd8e2f2456580eb72 |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Fri May 18 14:34:07 2007 +0100 |
| |
| Makefile permissions |
| |
| commit 1443a31457d68f7e8f0b9403e9832ec1e79dc59d |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Fri May 18 14:33:11 2007 +0100 |
| |
| Makefile permissions |
| |
| commit 255a3577c848706441daee0174543efe205a77f8 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Wed May 16 16:52:19 2007 -0500 |
| |
| Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx |
| |
| For all practical u-boot purposes, TSECs don't differ throughout the |
| mpc8[356]xx families; reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 70124c2602ae2d4c5d3dba05b482d91548242de8 |
| Author: Stefano Babic <sbabic@denx.de> |
| Date: Wed May 16 14:49:12 2007 +0200 |
| |
| Fix compile problem cause my Microblaze merge |
| |
| Signed-off-by: Stefano Babic <sbabic@denx.de> |
| |
| commit ada4697d0230d6da552867777f98a67ec3ba2579 |
| Author: Jeffrey Mann <mannj@embeddedplanet.com> |
| Date: Wed May 16 13:23:10 2007 +0200 |
| |
| [PATCH] Run new sequoia boards with an EBC speed of 83MHz |
| |
| Because the Sequoia board does not boot with an EBC faster than 66MHz, |
| the clock divider are changed after the initial boot process. |
| |
| This allows for maximum clocking speeds to be achieved on newer boards. |
| Sequoia boards with 666.66 MHz processors require that the EBC divider |
| be set to 3 in order to start the initial boot process at a slower EBC |
| speed. After the initial boot process, the divider can be set back to 2, |
| which will cause the boards to run at 83.333MHz. This is backward |
| compatible with boards with 533.33 MHz processors, as these boards will |
| already be set with an EBC divider of 2. |
| |
| Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com> |
| |
| commit a7676ea7732f3c596805079fed7e5c9fac652cfc |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed May 16 01:16:53 2007 +0200 |
| |
| Minor Coding Style cleanup, update CHANGELOG. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit d62f64cc23a940eafe712c776b3249e4160753d1 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed May 16 00:13:33 2007 +0200 |
| |
| Coding Style Cleanup, new CHANGELOG |
| |
| commit 3162eb836903c8b247fdc7470dd39bfa6996f495 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue May 15 23:38:05 2007 +0200 |
| |
| Minor coding style cleanup. |
| |
| commit 66d9dbec1cc27d6398ee6cf84639dbe14971251e |
| Author: mushtaq khan <mushtaq_k@procsys.com> |
| Date: Fri Apr 20 14:23:02 2007 +0530 |
| |
| Add driver for S-ATA-controller on Intel processors with South |
| Bridge, ICH-5, ICH-6 and ICH-7. |
| |
| Implementation: |
| |
| 1. Code is divided in to two files. All functions, which are |
| controller specific are kept in "drivers/ata_piix.c" file and |
| functions, which are not controller specific, are kept in |
| "common/cmd_sata.c" file. |
| |
| 2. Reading and Writing from the S-ATA drive is done using PIO method. |
| |
| 3. Driver can be configured for 48-bit addressing by defining macro |
| CONFIG_LBA48, if this macro is not defined driver uses the 28-bit |
| addressing. |
| |
| 4. S-ATA read function is hooked to the File system, commands like |
| ext2ls and ext2load file can be used. This has been tested. |
| |
| 5. U-Boot command "SATA_init" is added, which initializes the S-ATA |
| controller and identifies the S-ATA drives connected to it. |
| |
| 6. U-Boot command "sata" is added, which is used to read/write, print |
| partition table and get info about the drives present. This I have |
| implemented in same way as "ide" command is implemented in U-Boot. |
| |
| 7. This driver is for S-ATA in native mode. |
| |
| 8. This driver does not support the Native command queuing and |
| Hot-plugging. |
| |
| Signed-off-by: Mushtaq Khan <mushtaq_k@procsys.com> |
| |
| commit 644e6fb4eb8be90ea04ba34b643a8bf019d680e0 |
| Author: mushtaq khan <mushtaq_k@procsys.com> |
| Date: Mon Apr 30 15:57:22 2007 +0530 |
| |
| Fixes bug clearing the bss section for i386 |
| |
| Hi, |
| There is a bug in the code of clearing the bss section for processor |
| i386.(File: cpu/i386/start.S) |
| In the code, bss_start addr (starting addr of bss section) is put into |
| the register %eax, but the code which clears the bss section refers to |
| the addr pointed by %edi. |
| |
| This patch fixes this bug by putting bss_start into %edi register. |
| |
| Signed-off-by: Mushtaq Khan <mushtaq_k@procsys.com> |
| |
| commit c3243cf7b490057277d61acffe4ad0946f9eb4a4 |
| Author: Joe Hamman <joe.hamman@embeddedspecialties.com> |
| Date: Mon Apr 30 16:47:28 2007 -0500 |
| |
| Add support for BCM5464 Quad Phy |
| |
| Added support for Broadcom's BCM5464 Quad Phy |
| |
| Signed-off-by: Joe Hamman <joe.hamman@embeddedspecialties.com> |
| |
| commit 1b305bdc754c8468e1d5d858f5dcf8a7a0a4bb7a |
| Author: Zang Roy-r61911 <tie-fei.zang@freescale.com> |
| Date: Wed May 9 08:10:57 2007 +0800 |
| |
| Search the exception table with linear algorithm |
| |
| Search the exception table with linear algorithm instead of |
| bisecting algorithm. |
| Because the exception table might be unsorted. |
| |
| Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| |
| commit 5dfaa50eb819686bfba1927e8c5b8a70a4d65fd3 |
| Author: Aubrey.Li <aubrey.adi@gmail.com> |
| Date: Mon May 14 11:47:35 2007 +0800 |
| |
| Fix compilation issues on MACOSX |
| |
| Singed-off-by: Marc Hoffman <Marc.Hoffman@analog.com> |
| Signed-off-by: Aubrey Li <aubrey.adi@gmail.com> |
| |
| commit 56fd7162985c412317bbf763a225fba23c64fd31 |
| Author: Stephen Williams <steve@icarus.com> |
| Date: Tue May 15 07:55:42 2007 -0700 |
| |
| Fix for compile of JSE target |
| |
| The attached patch fixes the compile of the JSE board in the |
| denx git as of 14 may 2007. It is an extremely simple patch, |
| it just adds the missing define of CFG_SYSTEMACE_WIDTH. |
| |
| Fix to compile JSE against 20070514 git of u-boot |
| |
| commit 69df3c4da0c93017cceb25a366e794570bd0ed98 |
| Author: Nobuhiro Iwamatsu <iwamatsu@rahute.(none)> |
| Date: Sun May 13 21:01:03 2007 +0900 |
| |
| sh: MS7750SE support. |
| |
| This adds support for the Hitachi MS7750SE. |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 0b135cfc2e524dc249b75057b55dd4cc09842e27 |
| Author: Nobuhiro Iwamatsu <iwamatsu@rahute.(none)> |
| Date: Sun May 13 20:58:00 2007 +0900 |
| |
| sh: First support code of SuperH. |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 61936667e86a250ae12fd2dc189d3588f0a59e0b |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri May 11 12:01:49 2007 +0200 |
| |
| ppc4xx: Add mtcpr/mfcpr access macros |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 343c48bd84606c4025c8a7c7263fda465d6e284c |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri May 11 12:01:06 2007 +0200 |
| |
| ppc4xx: Set bd->bi_pci_busfreq on 440EPx/GRx too |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 7d98ba770a7eaefa29ce927f31a0956df85bf650 |
| Author: Piotr Kruszynski <ppk@semihalf.com> |
| Date: Thu May 10 16:55:52 2007 +0200 |
| |
| [Motion-PRO] Add MTD and JFFS2 support, also add default partition |
| definition. |
| |
| commit 65fb6a676e821f9570a2a376dc204bf611ce5f81 |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Wed May 9 11:42:44 2007 +0100 |
| |
| Add the board directory for SMN42 |
| |
| commit 160131bf965785419626df6c388729fe0b597992 |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Wed May 9 11:41:58 2007 +0100 |
| |
| Add the files for the SMN42 board |
| |
| commit 5c6d2b5a500f8c49670de8910150b78a41f781fc |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Wed May 9 11:40:34 2007 +0100 |
| |
| Remove the deleted files for the SMN42 patch |
| |
| commit b0d8f5bf0d215adc9424cb228b2484dbf07f7761 |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Wed May 9 11:37:56 2007 +0100 |
| |
| New board SMN42 branch |
| |
| commit 29f3be0caf0799ca6b89dfd9824c15619a50000f |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Wed May 9 10:24:38 2007 +0100 |
| |
| Makefile permissions |
| |
| commit b84289b595731e8851df46e893845cc1322c9b9b |
| Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Date: Tue May 8 14:17:07 2007 -0500 |
| |
| 8641hpcn: Fix Makefile after moving pixis to board/freescale. |
| |
| The OBJTREE != SRCTREE build scenario was broken. |
| This fixes it. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit e69f66c6ebe82bbbd1da766bc4eda40ec7ee5af1 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Tue May 8 15:57:43 2007 +0200 |
| |
| add: reading special purpose registers |
| |
| commit 1a50f164beb065f360fbddb76029607d6b099698 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Tue May 8 14:52:52 2007 +0200 |
| |
| add: Microblaze V5 exception handling |
| |
| commit ab874d5047e5d30dbc1e517ff26083efffa98ecb |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Tue May 8 14:39:11 2007 +0200 |
| |
| add: FSL control read and write |
| |
| commit de1de02a7cbf05e6b63e0d8ffc624f12493f6ba3 |
| Author: Piotr Kruszynski <ppk@semihalf.com> |
| Date: Tue May 8 13:05:44 2007 +0200 |
| |
| [Motion-PRO] Add support for I2C, EEPROM and RTC. |
| |
| commit fa5c2ba123b1bf88455bfc21db5e786ca045029d |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Tue May 8 10:23:56 2007 +0200 |
| |
| [Motion-PRO] Add ATA support. Add CF-booting commands to the default |
| environment. |
| |
| commit 06241d50a3ab1b20a0b08baeeaffcaa23ae4b839 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Tue May 8 09:39:12 2007 +0200 |
| |
| [Motion-PRO] Change IPB clock frequency from 50MHz to 100MHz. This |
| eliminates networking problems in Linux (timeouts). |
| |
| commit 1f1369c34b629be94702684d41d3fddf0f6193e7 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Tue May 8 09:21:57 2007 +0200 |
| |
| [Motion-PRO] Enable Flat Device Tree support and modify default environment |
| to allow booting of FDT-expecting kernels. |
| |
| commit fb05f6da35ea1c15c553abe6f23f656bf18dc5db |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Mon May 7 23:58:31 2007 +0200 |
| |
| new: USE_MSR_INTR support |
| |
| commit 008861a2f3ef2c062744d733787c7e530a1b8761 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Mon May 7 22:36:15 2007 +0200 |
| |
| [MPC5xxx] There are networking problems on the Motion-PRO board with |
| current PHY initalization code (tftp timeouts all the time). This commit |
| temporarily disables PHY initalization sequence to make the networking |
| operational, until a fix is found. |
| |
| commit abca901869c3760b6c5fecb825db6c1d91a78a93 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Mon May 7 22:10:36 2007 +0200 |
| |
| Get rid of duplicated file (see include/configs/sbc8560.h instead) |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 207b7b2c9d9752e0f6478c30c29b7087f6e6cbb6 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Mon May 7 22:07:08 2007 +0200 |
| |
| Get rid of duplicated file (see doc/README.SBC8560 instead) |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit a7bac7e9b57ba948051beb19ec5be3a75ce75383 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Mon May 7 19:43:10 2007 +0200 |
| |
| fix: read and write MSR - repair number of parameters |
| |
| commit 193b4a3bb3acaddf798da8de0da05d94ba8774ee |
| Author: Jeffrey Mann <mannj@embeddedplanet.com> |
| Date: Mon May 7 19:42:49 2007 +0200 |
| |
| [PATCH] ppc4xx: Fix CONFIG_SYS_CLK_FREQ definition in Sequoia config file |
| |
| A '3' got cut off in the formatting of the last patch to automatically |
| change the clock speed of the system clock on sequoia board. |
| |
| Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 19bf1fbad7f19d5a120be9b1daf136e052fcab39 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Mon May 7 19:33:51 2007 +0200 |
| |
| new: fsl interrupt support |
| FSL_Has_data is connected to INTC. |
| |
| commit 792032baa7d625e34c981ab6df521911bd8dc861 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Mon May 7 19:30:12 2007 +0200 |
| |
| fix: interrupt handler |
| remove asm code |
| |
| commit f3f001a341ef185d0f13841be5b5dc3395aacc31 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Mon May 7 19:25:08 2007 +0200 |
| |
| fix: remove asm code |
| |
| commit fb7c2dbef02c9f6f8d7b04ec4c2bfb91418b9c01 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Mon May 7 19:12:43 2007 +0200 |
| |
| fix: clean interrupt |
| |
| commit 42efed6130c8fcf7da881385b5427065d2801757 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Mon May 7 17:22:25 2007 +0200 |
| |
| fix: interrupt handler for multiple sources |
| |
| commit 48fbd3a4cdabbebc1debd7eed73c00c2caf914f6 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Mon May 7 17:11:09 2007 +0200 |
| |
| new: add writing to msr register |
| |
| commit 3a619dd7bed03e8b4d22a3911f90fd12af5376c2 |
| Author: Markus Klotzbuecher <mk@denx.de> |
| Date: Mon May 7 16:43:56 2007 +0200 |
| |
| Fix an ancient CHANGELOG conflict |
| |
| commit ac4cd59d59c9bf3f89cb7a344abf8184d678f562 |
| Author: Timur Tabi <timur@freescale.com> |
| Date: Sat May 5 08:12:30 2007 +0200 |
| |
| 5xxx: write MAC address to mac-address and local-mac-address |
| |
| Some device trees have a mac-address property, some have local-mac-address, |
| and some have both. To support all of these device trees, ftp_cpu_setup() |
| should write the MAC address to mac-address and local-mac-address, if they |
| exist. |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| Acked-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit a9d87e2707dcb249f6bb7f7ff7e00acd8cda9fd2 |
| Author: Grzegorz Wianecki <grzegorz.wianecki@gmail.com> |
| Date: Sun Apr 29 14:01:54 2007 +0200 |
| |
| [PATCH] Use PVR to distinguish MPC5200B from MPC5200 in boot message |
| |
| MPC5200B systems are incorrectly reported as MPC5200 in U-Boot start-up |
| message. Use PVR to distinguish between the two variants, and print proper CPU |
| information. |
| |
| Signed-off-by: Grzegorz Wianecki <grzegorz.wianecki@gmail.com> |
| Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 4ec5bd55ed1ffa91a774af298769621f4fbb18c1 |
| Author: Ladislav Michl <ladis@linux-mips.org> |
| Date: Wed Apr 25 16:01:26 2007 +0200 |
| |
| [PATCH] simplify silent console |
| |
| Signed-off-by: Ladislav Michl <ladis@linux-mips.org> |
| Acked-by: Stefan Roese <sr@denx.de> |
| |
| commit b7598a43f2b421a713d8135e98a42c37d9eb9df0 |
| Author: Sergei Shtylyov <sshtylyov@ru.mvista.com> |
| Date: Mon Apr 23 15:30:39 2007 +0200 |
| |
| [PATCH] Avoid assigning PCI resources from zero address |
| |
| If a PCI IDE card happens to get a zero address assigned to it, the Linux IDE |
| core complains and IDE drivers fails to work. Also, assigning zero to a BAR |
| was illegal according to PCI 2.1 (the later revisions seem to have excluded the |
| sentence about "0" being considered an invalid address) -- so, use a reasonable |
| starting value of 0x1000 (that's what the most Linux archs are using). |
| |
| Alternatively, one might have fixed the calls to pci_set_region() individually |
| (some code even seems to have taken care of this issue) but that would have |
| been a lot more work. :-) |
| |
| Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> |
| Acked-by: Stefan Roese <sr@denx.de> |
| |
| commit 9ffd451afeb08e5be7ddae680487ec962b2bca25 |
| Author: Jeffrey Mann <mannj@embeddedplanet.com> |
| Date: Mon Apr 23 14:00:11 2007 +0200 |
| |
| [patch] setenv(...) can delete environmentalvariables |
| |
| update setenv() function so that entering a NULL value for the |
| variable's value will delete the environmental variable |
| |
| Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com> |
| Acked-by: Stefan Roese <sr@denx.de> |
| |
| commit ebd0a0ae05a44769c4e27458ad4e9f3438250443 |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Mon Apr 23 13:54:24 2007 +0200 |
| |
| [patch] use unsigned char in smc91111 driver for mac |
| |
| the v_mac variable in the smc91111 driver is declared as a signed char ... |
| this causes problems when one of the bytes in the MAC is "signed" like 0xE0 |
| because when it gets printed out, you get a display like: |
| 0xFFFFFFE0 and that's no good |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit ffc50f9bb194343c6303517a517708457a5eb6b8 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Sat May 5 18:54:42 2007 +0200 |
| |
| new: FSL and MSR support #2 |
| |
| commit f7e2e0eb0668136305f78bb9c21be79b48a34247 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Sat May 5 18:27:16 2007 +0200 |
| |
| new: FSL and MSR support |
| |
| commit 2f15278c2eb911c668b4fe562130b78cf554d139 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sat May 5 18:23:11 2007 +0200 |
| |
| Coding stylke cleanup; update CHANGELOG. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 885ec89b648a899a2f32393fd3ffd9f7234c4402 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sat May 5 18:05:02 2007 +0200 |
| |
| Add STX GP3 SSA board to MAKEALL script; update CHANGELOG. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 5499645b3fe17a548af9dfc479ca6e2455f179a2 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sat May 5 17:15:50 2007 +0200 |
| |
| Make "file" command happy with some config.mk files; update CHANGELOG |
| |
| commit e3b8c78bc2489c27ae020986ef0eaca684866cef |
| Author: Jeffrey Mann <mannj@embeddedplanet.com> |
| Date: Sat May 5 08:32:14 2007 +0200 |
| |
| ppc4xx: Detect if the sysclk on Sequoia is 33 or 33.333 MHz |
| |
| The AMCC Secquoia board has been changed in a new revision from using a |
| 33.000 MHz clock to a 33.333 MHz system clock. A bit in the CPLD |
| indicates the difference. This patch reads that bit and uses the correct |
| clock speed for the board. This code is backward compatable will all |
| prior boards. All prior boards will be read as 33.000. |
| |
| Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit f544ff6656fca263ed1ebe39899b6d95da67c8b8 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat May 5 08:29:01 2007 +0200 |
| |
| ppc4xx: Sequoia: Remove cpu/ppc4xx/speed.c from NAND booting |
| |
| Using cpu/ppc4xx/speed.c to calculate the bus frequency is too big |
| for the 4k NAND boot image so define bus_frequency to 133MHz here |
| which is save for the refresh counter setup. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 2f550ab976405300f5b07bf2890800840d0aa05f |
| Author: Timur Tabi <timur@freescale.com> |
| Date: Sat May 5 08:12:30 2007 +0200 |
| |
| 5xxx: write MAC address to mac-address and local-mac-address |
| |
| Some device trees have a mac-address property, some have local-mac-address, |
| and some have both. To support all of these device trees, ftp_cpu_setup() |
| should write the MAC address to mac-address and local-mac-address, if they |
| exist. |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| Acked-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit a79886590593ba1d667c840caa4940c61639f18f |
| Author: Thomas Knobloch <knobloch@siemens.com> |
| Date: Sat May 5 07:04:42 2007 +0200 |
| |
| NAND: Wrong calculation of page number in nand_block_bad() |
| |
| In case that there is no memory based bad block table available the |
| function nand_block_checkbad() in drivers/mtd/nand/nand_base.c will call |
| nand_block_bad() directly. When parameter 'getchip' is set to zero, |
| nand_block_bad() will not right shift the offset to calculate the |
| correct page number. |
| |
| Signed-off-by: Thomas Knobloch <knobloch@siemens.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 9877d7dcd1eebe61aa5d8b8ffe9c048ea426e6f6 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Fri May 4 10:02:33 2007 +0200 |
| |
| Fix initrd length corruption in bootm command. |
| |
| When using FDT Images, the length of an inital ramdisk was |
| overwritten (bug introduced by commit 87a449c8, 22 Aug 2006). |
| |
| Patches by Timur Tabi & Johns Daniel. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 068aab660bc3912b930be5540e6b3f3fd6ad3c96 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Thu May 3 19:43:52 2007 -0500 |
| |
| mpc83xx: fix trivial error in MAKEALL |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit c64a89d6ce8584b9fc64f4e85da9ecac3cfc2c2a |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Thu May 3 16:34:41 2007 +0200 |
| |
| Update board configuration for STX GP3SSA board: |
| |
| Enable hush shell, environment in flash rather in EEPROM, |
| more user-friendly default environment, etc. |
| The simple EEPROM environment can be selected easily in the board |
| config file. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 2c6fb199dc5756fc72f49d1f4de105e089049d65 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Apr 24 14:37:49 2007 +0200 |
| |
| Cleanup STX GP3SSA code; fix build and compile problems. |
| |
| commit 35171dc04e028ecacc23ad916a66295472555dbf |
| Author: Dan Malek <dan@embeddedalley.com> |
| Date: Fri Jan 5 09:15:34 2007 +0100 |
| |
| Add support for STX GP3SSA (stxssa) Board |
| |
| Signed-off-by Dan Malek, <dan@embeddedalley.com> |
| |
| commit f2134f8e9eb006bdcd729e89f309c07b2fa45180 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Wed May 2 13:31:53 2007 +0200 |
| |
| macb: Don't restart autonegotiation if we already have link |
| |
| Rework macb_phy_init so that it doesn't attempt to re-negotiate if the |
| link is already up. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 04fcb5d38bc90779cd9a710d60702075986f0e29 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Wed May 2 13:22:38 2007 +0200 |
| |
| macb: Introduce a few barriers when dealing with DMA descriptors |
| |
| There were a few theoretical possibilities that the compiler might |
| optimize away DMA descriptor reads and/or writes and thus cause |
| synchronization problems with the hardware. Insert barriers where |
| we depend on reads/writes actually hitting memory. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit ffa621a0d12a1ccd81c936c567f8917a213787a8 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Sat Feb 24 01:08:13 2007 -0600 |
| |
| Cleaned up some 85xx PCI bugs |
| |
| * Cleaned up the CDS PCI Config Tables and added NULL entries to |
| the end |
| * Fixed PCIe LAWBAR assignemt to use the cpu-relative address |
| * Fixed 85xx PCI code to assign powar region sizes based on the |
| config values (rather than hard-coding them) |
| * Fixed the 8548 CDS PCI2 IO to once again have 0 as the base address |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 6743105988fc44d5b0d30388c790607835aae7a6 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Mon Apr 23 02:54:25 2007 -0500 |
| |
| Add support for the 8568 MDS board |
| |
| This included some changes to common files: |
| * Add 8568 processor SVR to various places |
| * Add support for setting the qe bus-frequency value in the dts |
| * Add the 8568MDS target to the Makefile |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit af1c2b84bf27c8565baddc82d1abb93700d10e2e |
| Author: David Updegraff <dave@cray.com> |
| Date: Fri Apr 20 14:34:48 2007 -0500 |
| |
| Add support for treating unknown PHYs as generic PHYs. |
| |
| When bringing up u-boot on new boards, PHY support sometimes gets |
| neglected. Most PHYs don't really need any special support, |
| though. By adding a generic entry that always matches if nothing |
| else does, we can provide support for "unsupported" PHYs for the |
| tsec. |
| |
| The generic PHY driver supports most PHYs, including gigabit. |
| |
| Signed-off-by: David Updegraff <dave@cray.com> |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit a75af9bfd8fff0499efdbb90601cec5a2afef117 |
| Author: James Yang <James.Yang@freescale.com> |
| Date: Wed Feb 7 15:28:04 2007 -0600 |
| |
| Conditionalize 8641 Rev1.0 MCM workarounds |
| |
| Signed-off-by: James Yang <James.Yang@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit f64702b7fc8f8df39d31add770df6e372f9e9ce3 |
| Author: Timur Tabi <timur@freescale.com> |
| Date: Mon Apr 30 13:59:50 2007 -0500 |
| |
| Fix memory initialization on MPC8349E-mITX |
| |
| Define CFG_DDR_SDRAM_CLK_CNTL for the MPC8349E-mITX and MPC8349E-mITX-GP. |
| This allows ddr->sdram_clk_cntl to be properly initialized. This is necessary |
| on some ITX boards, notably those with a revision 3.1 CPU. |
| |
| Also change spd_sdram() in cpu/mpc83xx/spd_sdram.c to not write anything into |
| ddr->sdram_clk_cntl if CFG_DDR_SDRAM_CLK_CNTL is not defined. |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| Acked-by: Michael Benedict <MBenedict@twacs.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 54b2d434ae9d01787936f34fe1759cf3d7624ae3 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Mon Apr 30 15:26:21 2007 -0500 |
| |
| mpc83xx: replace elaborate boottime verbosity with 'clocks' command |
| |
| and fix CPU: to align with Board: display text. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit c1ab82669d9525998c34e802a12cad662723f22a |
| Author: James Yang <James.Yang@freescale.com> |
| Date: Fri Mar 16 13:02:53 2007 -0500 |
| |
| Rewrote picos_to_clk() to avoid rounding errors. |
| Clarified that conversion is to DRAM clocks rather than platform clocks. |
| Made function static to spd_sdram.c. |
| |
| Signed-off-by: James Yang <James.Yang@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 8b39501d28754e72726ce7fb02310e56dbdf116a |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sun Apr 29 14:13:01 2007 +0200 |
| |
| ppc4xx: Bamboo: Use current NAND driver and *not* the legacy driver |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 864aa6a6a466fcb92bf32b1d7dba79cd709b52c9 |
| Author: Grzegorz Wianecki <grzegorz.wianecki@gmail.com> |
| Date: Sun Apr 29 14:01:54 2007 +0200 |
| |
| [PATCH] Use PVR to distinguish MPC5200B from MPC5200 in boot message |
| |
| MPC5200B systems are incorrectly reported as MPC5200 in U-Boot start-up |
| message. Use PVR to distinguish between the two variants, and print proper CPU |
| information. |
| |
| Signed-off-by: Grzegorz Wianecki <grzegorz.wianecki@gmail.com> |
| Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 5c5d3242935cf3543af01142627494434834cf98 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Wed Apr 25 12:34:38 2007 -0500 |
| |
| mpc83xx: minor fixups for 8313rdb introduction |
| |
| commit ada4d40091f6ed4a4f0040e08d20db21967e4a67 |
| Author: Ladislav Michl <ladis@linux-mips.org> |
| Date: Wed Apr 25 16:01:26 2007 +0200 |
| |
| [PATCH] simplify silent console |
| |
| Signed-off-by: Ladislav Michl <ladis@linux-mips.org> |
| Acked-by: Stefan Roese <sr@denx.de> |
| |
| commit 144876a380f5756f57412caf74c1d6dc201dd796 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Tue Apr 24 23:01:02 2007 +0200 |
| |
| [PATCH] MTD partition support, JFFS2 support |
| |
| commit 37ed6cdd4159195bfad68d8a237f6adda8f482cb |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Tue Apr 24 14:03:45 2007 +0200 |
| |
| ppc4xx: setup 440EPx/GRx ZMII/RGMII bridge depending on PFC register content. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit 66ed6cca3f340f7a8a06d9272ae2ef8e96f0273d |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Mon Apr 23 02:37:47 2007 -0500 |
| |
| Reworked 85xx speed detection code |
| |
| Changed the code to read the registers and calculate the clock |
| rates, rather than using a "switch" statement. |
| |
| Idea from Andrew Klossner <andrew@cesa.opbu.xerox.com> |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 81f481ca708ed6a56bf9c410e3191dbad581c565 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Mon Apr 23 02:24:28 2007 -0500 |
| |
| Enable 8544 support |
| |
| * Add support to the Makefile |
| * Add 8544 configuration support to the tsec driver |
| * Add 8544 SVR numbers to processor.h |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 0d8c3a2096eaff8d7de89d45e9af4d4b0d4868fe |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Fri Feb 23 17:12:25 2007 -0600 |
| |
| Support 1G size on 8548 |
| |
| e500v2 and newer cores support 1G page sizes. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 45cef612cc601d2d1c890fbbd7cdc9609a189a46 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Fri Feb 23 17:11:16 2007 -0600 |
| |
| Changed BOOKE_PAGESZ_nGB to BOOKE_PAGESZ_nG |
| |
| The other pagesz constants use one letter to specify order of |
| magnitude. Also change the one reference to it in mpc8548cds/init.S |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 1f9a318cea14272edd10d63739e2d326c90f430e |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Fri Feb 23 16:28:46 2007 -0600 |
| |
| Only set ddrioovcr for 8548 rev1. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 9343dbf85bc03033f2102d8e8543567c2c1ad2d2 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Sat Feb 24 01:16:45 2007 -0600 |
| |
| Tweak DDR ECC error counter |
| |
| Enable single-bit error counter when memory was cleared by ddr controller. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 85e7c7a45e3dd9c7ce3e722352ba60f8df1a7a4b |
| Author: Timur Tabi <timur@freescale.com> |
| Date: Mon Feb 12 13:34:55 2007 -0600 |
| |
| 85xx: write MAC address to mac-address and local-mac-address |
| |
| Some device trees have a mac-address property, some have local-mac-address, |
| and some have both. To support all of these device trees, ftp_cpu_setup() |
| should write the MAC address to mac-address and local-mac-address, if they |
| exist. |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| |
| commit 03b81b48eec0ad249ec97a4ae16c36fa2e014ff4 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Mon Apr 23 01:44:44 2007 -0500 |
| |
| Some 85xx cpu cleanups |
| |
| * Cleaned up the TSR[WIS] clearing |
| * Cleaned up DMA initialization |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| Acked-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 151d5d992eab8c497b24c816c73dc1ad8bffb4eb |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Mon Apr 23 01:32:22 2007 -0500 |
| |
| Add cpu support for the 8544 |
| |
| Recognize new SVR values, and add a few register definitions |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| Acked-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 25d83d7f4ac65727182d8ddaf7ba42fa74cf65ae |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Wed Apr 11 16:51:02 2007 -0500 |
| |
| Add MPC8544DS basic port board files. |
| |
| Add board port under new board/freescale directory |
| structure and reuse existing PIXIS FPGA support there. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 0cde4b00fc7393b89f379d83a9d436dcb1334bfa |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Wed Apr 11 16:50:57 2007 -0500 |
| |
| Add MPC8544DS main configuration file. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 362dd83077ac04c0296bca3e824ec2fb3d44d9d6 |
| Author: Sergei Shtylyov <sshtylyov@ru.mvista.com> |
| Date: Wed Dec 27 22:07:15 2006 +0300 |
| |
| Fix PCI I/O space mapping on Freescale MPC85x0ADS |
| |
| The PCI I/O space mapping for Freescale MPC8540ADS board was broken by commit |
| 52c7a68b8d587ebcf5a6b051b58b3d3ffa377ddc which failed to update the #define's |
| describing the local address window used for the PCI I/O space accesses -- fix |
| this and carry over the necessary changes into the MPC8560ADS code since the |
| PCI I/O space mapping was also broken for this board (by the earlier commit |
| 087454609e47295443af793a282cddcd91a5f49c). Add the comments clarifying how |
| the PCI I/O space must be mapped to all the MPC85xx board config. headers. |
| |
| Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> |
| |
| board/mpc8540ads/init.S | 4 ++-- |
| board/mpc8560ads/init.S | 4 ++-- |
| include/configs/MPC8540ADS.h | 5 ++--- |
| include/configs/MPC8541CDS.h | 2 +- |
| include/configs/MPC8548CDS.h | 2 +- |
| include/configs/MPC8560ADS.h | 8 ++++---- |
| 6 files changed, 12 insertions(+), 13 deletions(-) |
| |
| commit 96629cbabdb727d4a5e62542deefc01d498db6dc |
| Author: Zang Roy-r61911 <tie-fei.zang@freescale.com> |
| Date: Tue Dec 5 16:42:30 2006 +0800 |
| |
| u-boot: Fix e500 v2 core reset bug |
| |
| The following patch fixes the e500 v2 core reset bug. |
| For e500 v2 core, a new reset control register is added to reset the |
| processor. |
| |
| Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| |
| commit 63247a5acd58032e6cf33f525bc3923b467bac88 |
| Author: Zang Roy-r61911 <tie-fei.zang@freescale.com> |
| Date: Wed Dec 20 11:01:00 2006 +0800 |
| |
| u-boot: v2: Remove the fixed TLB and LAW entrynubmer |
| |
| Remove the fixed TLB and LAW entry nubmer. Use actually TLB and LAW |
| entry number to control the loop. This can reduce the potential risk |
| for the 85xx processor increasing its TLB adn LAW entry number. |
| |
| Signed-off-by: Swarthout Edward <swarthout@freescale.com> |
| Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| |
| commit 0b1934ba12fd408fcc3b8bd9f4b04864c42a42bf |
| Author: Zang Roy-r61911 <tie-fei.zang@freescale.com> |
| Date: Mon Dec 18 17:01:04 2006 +0800 |
| |
| u-boot: Fix the 85xxcds tsec bug |
| |
| Fix the 85xxcds tsec bug. |
| When enable PCI, tsec.o should be added to u-boot.lds to make tsec work. |
| |
| Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| |
| commit 7337b237ffc4aaf1b9467024fe472a880d852598 |
| Author: Zang Roy-r61911 <tie-fei.zang@freescale.com> |
| Date: Fri Dec 15 14:43:31 2006 +0800 |
| |
| u-boot: Fix CPU2 errata on MPC8548CDS board |
| |
| This patch apply workaround of CPU2 errata on MPC8548CDS board. |
| |
| Signed-off-by:Ebony Zhu <ebony.zhu@freescale.com> |
| |
| commit 39b18c4f3e0b6d0dc00f4e68bad2da3766c85f09 |
| Author: ebony.zhu@freescale.com <ebony.zhu@freescale.com> |
| Date: Mon Dec 18 16:25:15 2006 +0800 |
| |
| u-boot: Disables MPC8548CDS 2T_TIMING for DDR by default |
| |
| This patch disables MPC8548CDS 2T_TIMING for DDR by default. |
| |
| Signed-off-by:Ebony Zhu <ebony.zhu@freescale.com> |
| |
| commit 41fb7e0f1ec9b91bdae2565bab5f2e3ee15039c7 |
| Author: Zang Roy-r61911 <tie-fei.zang@freescale.com> |
| Date: Thu Dec 14 14:14:55 2006 +0800 |
| |
| u-boot: Enable PCI function and add PEX & rapidio memory map on MPC8548CDS board |
| |
| Enable PCI function and add PEX & rapidio memory map on MPC8548CDS |
| board. |
| Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| |
| commit 96b8a05432f346f36493535c85320b70ec9c7c1b |
| Author: Scott Wood <scottwood@freescale.com> |
| Date: Mon Apr 16 14:54:15 2007 -0500 |
| |
| mpc83xx: Add MPC8313ERDB support. |
| |
| Signed-off-by: Scott Wood <scottwood@freescale.com> |
| |
| commit 49ea3b6eafe606285ae4d5c378026153dde53200 |
| Author: Scott Wood <scottwood@freescale.com> |
| Date: Mon Apr 16 14:34:21 2007 -0500 |
| |
| mpc83xx: Add generic PCI setup code. |
| |
| Board code can now request the generic setup code rather than having to |
| copy-and-paste it for themselves. Boards should be converted to use this |
| once they're tested with it. |
| |
| Signed-off-by: Scott Wood <scottwood@freescale.com> |
| |
| commit 7c98e5193e93df6b9b651851d54b638a61ebb0ea |
| Author: Scott Wood <scottwood@freescale.com> |
| Date: Mon Apr 16 14:34:19 2007 -0500 |
| |
| mpc83xx: Add 831x support to speed.c. |
| |
| Signed-off-by: Scott Wood <scottwood@freescale.com> |
| |
| commit 0f253283a32d91e06844d7f87f9b33f4f4fbce8f |
| Author: Scott Wood <scottwood@freescale.com> |
| Date: Mon Apr 16 14:34:18 2007 -0500 |
| |
| mpc83xx: Add 831x support to global_data.h |
| |
| Signed-off-by: Scott Wood <scottwood@freescale.com> |
| |
| commit 95e7ef897e54591e615fc1b458b74c286fe1fb06 |
| Author: Scott Wood <scottwood@freescale.com> |
| Date: Mon Apr 16 14:34:16 2007 -0500 |
| |
| mpc83xx: Change PVR_83xx to PVR_E300C1-3, and update checkcpu(). |
| |
| Rather than misleadingly define PVR_83xx as the specific type of 83xx |
| being built for, the PVR of each core revision is defined. checkcpu() now |
| prints the core that it detects, rather than aborting if it doesn't find |
| what it thinks it wants. |
| |
| Signed-off-by: Scott Wood <scottwood@freescale.com> |
| |
| commit a35b0c4950d84cf9e3a9e32b916135956d1ac636 |
| Author: Scott Wood <scottwood@freescale.com> |
| Date: Mon Apr 16 14:34:15 2007 -0500 |
| |
| mpc83xx: Recognize SPR values for MPC8311 and MPC8313. |
| |
| Signed-off-by: Scott Wood <scottwood@freescale.com> |
| |
| commit d87c57b201b4572d16f1b642998faa00c9912b16 |
| Author: Scott Wood <scottwood@freescale.com> |
| Date: Mon Apr 16 14:31:55 2007 -0500 |
| |
| mpc83xx: Add register definitions for MPC831x. |
| |
| Signed-off-by: Scott Wood <scottwood@freescale.com> |
| |
| commit 7fc4c71a143be8666d70803fb25ae60379c95622 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Apr 23 15:39:59 2007 +0200 |
| |
| Fix file mode |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 38257988abfe74d459ca2ad748b109ca04e4efe1 |
| Author: Sergei Shtylyov <sshtylyov@ru.mvista.com> |
| Date: Mon Apr 23 15:30:39 2007 +0200 |
| |
| [PATCH] Avoid assigning PCI resources from zero address |
| |
| If a PCI IDE card happens to get a zero address assigned to it, the Linux IDE |
| core complains and IDE drivers fails to work. Also, assigning zero to a BAR |
| was illegal according to PCI 2.1 (the later revisions seem to have excluded the |
| sentence about "0" being considered an invalid address) -- so, use a reasonable |
| starting value of 0x1000 (that's what the most Linux archs are using). |
| |
| Alternatively, one might have fixed the calls to pci_set_region() individually |
| (some code even seems to have taken care of this issue) but that would have |
| been a lot more work. :-) |
| |
| Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> |
| Acked-by: Stefan Roese <sr@denx.de> |
| |
| commit afb903a2eb9436baa9270ccc0c27082d86497d89 |
| Author: Jeffrey Mann <mannj@embeddedplanet.com> |
| Date: Mon Apr 23 14:00:11 2007 +0200 |
| |
| [patch] setenv(...) can delete environmentalvariables |
| |
| update setenv() function so that entering a NULL value for the |
| variable's value will delete the environmental variable |
| |
| Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com> |
| Acked-by: Stefan Roese <sr@denx.de> |
| |
| commit 36f104e5caa747d568eff26b369565af57c2ffa6 |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Mon Apr 23 13:54:24 2007 +0200 |
| |
| [patch] use unsigned char in smc91111 driver for mac |
| |
| the v_mac variable in the smc91111 driver is declared as a signed char ... |
| this causes problems when one of the bytes in the MAC is "signed" like 0xE0 |
| because when it gets printed out, you get a display like: |
| 0xFFFFFFE0 and that's no good |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit d98c0885ad617fccf21e7c26ef8cb728fbfb2459 |
| Author: Rodolfo Giometti <giometti@enneenne.com> |
| Date: Mon Apr 23 13:10:52 2007 +0200 |
| |
| USB: (Another) delay for crappy USB keys. |
| |
| Some USB keys are slow in giving back an answer when the Root HUB |
| enables power lines. |
| |
| Signed-off-by: Rodolfo Giometti <giometti@linux.it> |
| |
| commit 323bfa8f436dc3bc57187c9b1488bc3146ff1522 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Apr 23 12:00:22 2007 +0200 |
| |
| Remove BOARDLIBS usage completely |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 32556443840f127170e4baa8bdd5b567039f6c36 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Sat Apr 21 21:07:22 2007 +0200 |
| |
| [PATCH] SystemACE support for Microblaze |
| |
| commit 0643631aa1036cd746bf5d15f5a34bc7bc01ea4f |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Sat Apr 21 21:02:40 2007 +0200 |
| |
| 16bit read/write little endian |
| |
| commit 9d1d6a34d26c5933bc097ce73c9348f95573cdd4 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Sat Apr 21 20:53:31 2007 +0200 |
| |
| Change ML401 parameters - Xilinx BSP |
| |
| commit 2e343b9a57f32e1bd08c35c9976910333fb4e13d |
| Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Date: Wed Feb 28 05:37:29 2007 -0600 |
| |
| mpc8641hpcn: Fix LAW and TLB setup to use the IO_PHYS #defines. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| |
| commit 79cb47391eebef85acadb3f6961ef6c55cace6ac |
| Author: Zhang Wei <wei.zhang@freescale.com> |
| Date: Fri Jan 19 10:42:37 2007 +0800 |
| |
| Enable LAWs for MPC8641 PCI-Ex2. |
| |
| Signed-off-by: Zhang Wei <wei.zhang@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit bd7851ce1e1f140665b520026abf1042968b1102 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Fri Apr 20 14:12:26 2007 -0500 |
| |
| mpc86xx; Write MAC address to mac-address and local-mac-address |
| |
| Some device trees have a mac-address property, some have local-mac-address, |
| and some have both. To support all of these device trees, ftp_cpu_setup() |
| should write the MAC address to mac-address and local-mac-address, if they |
| exist. |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 7dbdf28b8bd855a8530dc3292e4982575a197060 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Fri Apr 20 14:11:38 2007 -0500 |
| |
| mpc86xx: protect memcpy to bad address if a mac-address is missing from dt |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 14da5f7675bbb427c469e3f45006e027b6e21db9 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Fri Apr 20 17:43:28 2007 +0200 |
| |
| Cleanup compiler warnings, update CHANGELOG |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 6923565db12af34fd5e02d354ee65a8c78ac460f |
| Author: Detlev Zundel <dzu@denx.de> |
| Date: Fri Apr 20 12:01:47 2007 +0200 |
| |
| Fix breakage of NC650 board with respect to nand support. |
| |
| Signed-off-by: Detlev Zundel <dzu@denx.de> |
| |
| commit 39f23cd90947639ac278a18ff277ec786b5ac167 |
| Author: Domen Puncer <domen.puncer@telargo.com> |
| Date: Fri Apr 20 11:13:16 2007 +0200 |
| |
| [RFC PATCH] icecube/lite5200b: fix OF_TBCLK (timebase-frequency) calculation |
| |
| G2 core reference manual says decrementer and time base |
| are decreasing/increasing once every 4 bus clock cycles. |
| Lets fix it, so time in Linux won't run twice as fast |
| |
| Signed-off-by: Domen Puncer <domen.puncer@telargo.com> |
| Acked-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 7651f8bdbba03bb0b4f241e2d2c4cb65b230bd56 |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Thu Apr 19 23:14:39 2007 -0400 |
| |
| Fix serious pointer bug with bootm and reserve map. |
| |
| What was suppose to be a stack variable was declared as a pointer, |
| overwriting random memory. |
| Also moved the libfdt.a requirement into the main Makefile. That is |
| The U-Boot Way. |
| |
| commit d21686263574e95cb3e9e9b0496f968b1b897fdb |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Apr 19 09:53:52 2007 +0200 |
| |
| ppc4xx: Fix chip select timing for SysACE access on AMCC Katmai |
| |
| Previous versions used full wait states for the chip select #1 which |
| is connected to the Xilinix SystemACE controller on the AMCC Katmai |
| evaluation board. This leads to really slow access and therefore low |
| performance. This patch now sets up the chip select a lot faster |
| resulting in much better read/write performance of the Linux driver. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 37837828d89084879bee2f2b8c7c68d4695940df |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Apr 18 17:49:29 2007 +0200 |
| |
| Clenaup, update CHANGELOG |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit fd094c6379e2ef8a4d0ceb5640b24cb0c8d04449 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Apr 18 17:20:58 2007 +0200 |
| |
| Update CHANGELOG |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 2a26ec4732efd7a308d0bbc97714c1d75ef1173b |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Apr 18 17:07:26 2007 +0200 |
| |
| Cleanup, update CHANGELOG |
| |
| Sigend-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 5f6c732affea9647762d27a4617a2ae64c52dceb |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Apr 18 16:17:46 2007 +0200 |
| |
| Update CHANGELOG |
| |
| commit ad4eb555671d97f96dc56eab55103b1f86874b01 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Apr 18 14:30:39 2007 +0200 |
| |
| MCC200 board: remove warning which is obsolete after PSoC firmware changes |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 3747a3f010b2b1442dec3e871c69788b6017aaae |
| Author: Domen Puncer <domen.puncer@telargo.com> |
| Date: Wed Apr 18 12:11:05 2007 +0200 |
| |
| [PATCH] icecube/lite5200b: document wakeup from low-power support |
| |
| Signed-off-by: Domen Puncer <domen.puncer@telargo.com> |
| |
| commit e673226ff9d6aa91b47ceac74b8c13770b06bb37 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Apr 18 12:07:47 2007 +0200 |
| |
| ppc4xx: Update Acadia to not setup PLL when booting via bootstrap EEPROM |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 90e6f41cf09fc98f6ccb510e183d53ab8546cf2f |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Apr 18 12:05:59 2007 +0200 |
| |
| ppc4xx: Add output for bootrom location to 405EZ ports |
| |
| Now 405EZ ports also show upon bootup from which boot device |
| they are configured to boot: |
| |
| U-Boot 1.2.0-gd3832e8f-dirty (Apr 18 2007 - 07:47:05) |
| |
| CPU: AMCC PowerPC 405EZ Rev. A at 199.999 MHz (PLB=133, OPB=66, EBC=66 MHz) |
| Bootstrap Option E - Boot ROM Location EBC (32 bits) |
| 16 kB I-Cache 16 kB D-Cache |
| Board: Acadia - AMCC PPC405EZ Evaluation Board |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 9c00dfb0bf89c8c23e8af5b5bdf49cf66d769f85 |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Tue Apr 17 13:30:33 2007 +0100 |
| |
| Move ppearse to ARM board list |
| Add Konstantin Kletschke for scb9328. |
| Signed-off-by: Peter Pearse <peter.pearse@arm.com> |
| |
| commit d3832e8fe1b214ec62424eac36cfda9fc56d21b3 |
| Author: Domen Puncer <domen.puncer@telargo.com> |
| Date: Mon Apr 16 14:00:13 2007 +0200 |
| |
| [PATCH] icecube/lite5200b: wakeup from low-power support |
| |
| U-Boot part of Lite5200b low power mode support. |
| Puts SDRAM out of self-refresh and transfers control to |
| address saved at physical 0x0. |
| |
| Signed-off-by: Domen Puncer <domen.puncer@telargo.com> |
| Acked-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit f35a53fc7b0c79fcfe7bdc01163c4b34aaba1460 |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Sun Apr 15 13:54:26 2007 -0400 |
| |
| Fix the ft_cpu_setup() property settings. |
| |
| Use "setter" functions instead of flags, cleaner and more flexible. |
| It also fixes the problem noted by Timur Tabi that the ethernet MAC |
| addresses were all being set incorrectly to the same MAC address. |
| |
| commit c28abb9c614f65ce2096cc4a66fc886c77d0e5a4 |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Sat Apr 14 22:51:24 2007 -0400 |
| |
| Improve the bootm command for CONFIG_OF_LIBFDT |
| |
| In bootm, create the "/chosen" node only if it doesn't already exist |
| (better matches the previous behavior). |
| Update for proper reserved memory map handling for initrd. |
| |
| commit 3f9f08cf91c8a6949a5d78a18bd3d8df7b86d888 |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Sat Apr 14 22:46:41 2007 -0400 |
| |
| Add some utilities to manipulate the reserved memory map. |
| |
| commit 8048cdd56f04a756eeea4951f402bf5cc33785db |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sat Apr 14 21:16:54 2007 +0200 |
| |
| Update CHANGELOG |
| |
| commit 8e6875183cdca91c134408d119d4abcd48ef6856 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Sun Dec 17 18:56:46 2006 +0100 |
| |
| AVR32: Enable MMC support |
| |
| Set up the portmux for the MMC interface and enable the MMC driver |
| along with support for DOS partitions, ext2 and FAT filesystems. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit fc26c97bb6df41b4a95662c34054fe912387bf38 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Fri Jan 20 10:03:53 2006 +0100 |
| |
| Atmel MCI driver |
| |
| Driver for the Atmel MCI controller (MMC interface) for AT32AP CPUs. |
| |
| The AT91 ARM-based CPUs use basically the same hardware, so it should |
| be possible to share this driver, but no effort has been made so far. |
| |
| Hardware documentation can be found in the AT32AP7000 data sheet, |
| which can be downloaded from |
| |
| http://www.atmel.com/dyn/products/datasheets.asp?family_id=682 |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 05fdab1ef6a10d049a50021a86f1226f444d9b9f |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Sun Dec 17 18:55:37 2006 +0100 |
| |
| AVR32: Add clk and gpio infrastructure for mmci |
| |
| Implement functions for configuring the mmci pins, as well as |
| functions for getting the clock rate of the mmci controller. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 7fac3f69e9f05c5e5326681976c35d129324c4de |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Sun Dec 17 18:53:56 2006 +0100 |
| |
| Enable partition support with MMC |
| |
| Include implementations of init_part() and get_partition_info() when |
| CONFIG_MMC is set. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 9a24f477a1ed5bb0f74377c985d754ebbfa44872 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Sun Dec 17 17:14:30 2006 +0100 |
| |
| AVR32: Enable networking |
| |
| Implement MACB initialization for AVR32 and ATSTK1000, and turn |
| everything on, including the MACB driver. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 5c1fe1ffffd1750a7e47e5a2e2cd600c00e4f009 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Fri Jan 20 10:03:34 2006 +0100 |
| |
| Atmel MACB ethernet driver |
| |
| Driver for the Atmel MACB on-chip ethernet controller. |
| |
| This driver has been tested on the ATSTK1000 board with a AT32AP7000 |
| CPU. It should probably work on AT91SAM926x as well with some minor |
| modifications. |
| |
| Hardware documentation can be found in the AT32AP7000 data sheet, |
| which can be downloaded from |
| |
| http://www.atmel.com/dyn/products/datasheets.asp?family_id=682 |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit b4ec9c2d43d894729bb633bfdbdfa95a962c1556 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Sun Dec 17 16:56:14 2006 +0100 |
| |
| AVR32: Add clk and gpio infrastructure for macb0 and macb1 |
| |
| Implement functions for configuring the macb0 and macb1 pins, as |
| well as functions for getting the clock rate of the various |
| busses the macb ethernet controllers are connected to. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit d5acb95b16a0a74c643524342c3437e765426d05 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Sun Dec 17 15:39:15 2006 +0100 |
| |
| AVR32: Implement simple DMA memory allocator |
| |
| Implement dma_alloc_coherent() which returns cache-aligned |
| uncacheable memory. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 91975b0fea773c9e681fea8cf3349669f27685ee |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Sun Dec 17 15:46:02 2006 +0100 |
| |
| Import <linux/mii.h> from the Linux kernel |
| |
| Instead of creating yet another set of MII register definitions |
| in the macb driver, here's a complete set of definitions for everyone |
| to use. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 1b804b229556a4d862da93c0ec94e79419364b2c |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Wed Mar 21 19:47:36 2007 +0100 |
| |
| AVR32: Include more commands for ATSTK1000 |
| |
| Include the imi, imls and jffs commands sets by default on ATSTK1000. |
| Also define CONFIG_BOOTARGS to something more useful, define |
| CONFIG_BOOTCOMMAND and enable autoboot by default. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 9c0deb5ae3ea0189f2e08ac29ef1316f1fb8548d |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Wed Mar 21 19:44:48 2007 +0100 |
| |
| AVR32: Provide a definition of struct stat |
| |
| Copy the definition of struct stat from the Linux kernel. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 12f099c08167a7a51aeee623bc16dafd0841271c |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Sun Dec 17 14:46:06 2006 +0100 |
| |
| AVR32: Use initdram() instead of board_init_memories() |
| |
| Conform to the "standard" interface and use initdram() instead of |
| board_init_memories() on AVR32. This enables us to get rid of the |
| sdram_size member of the global_data struct as well. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 1f4f2121c2685182eb87fa9a9b799d1917387a1c |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Mon Nov 20 15:53:10 2006 +0100 |
| |
| AVR32: Relocate u-boot to SDRAM |
| |
| Relocate the u-boot image into SDRAM like everyone else does. This |
| means that we can handle much larger .data and .bss than we used to. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit df548d3c3e2bbc40258713167859ffc2ce99a900 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Sun Nov 19 18:06:53 2006 +0100 |
| |
| AVR32: Resource management rewrite |
| |
| Rewrite the resource management code (i.e. I/O memory, clock gating, |
| gpio) so it doesn't depend on any global state. This is necessary |
| because this code is heavily used before relocation to RAM, so we |
| can't write to any global variables. |
| |
| As an added bonus, this makes u-boot's memory footprint a bit smaller, |
| although some functionality has been left out; all clocks are enabled |
| all the time, and there's no checking for gpio line conflicts. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 03d1e1365796cd15d1726e8a51fd8b5be50b2fe9 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Sat Nov 18 18:01:13 2006 +0100 |
| |
| AVR32: Clean up memory-map.h for at32ap7000 |
| |
| Convert spaces to tabs (must have missed this one last time around), |
| sort the entries by address and group them together by bus |
| connectivity. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 28c699ef69f4b6cdf252e4747b7b590028a88981 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Sat Nov 18 17:32:31 2006 +0100 |
| |
| AVR32: Build position-independent u-boot |
| |
| Add -fPIC -mno-init-got to the avr32-specific CFLAGS to make u-boot |
| position independent. This will make relocation a lot easier. |
| |
| -mno-init-got means that gcc shouldn't emit code to load the GOT |
| address into r6 in every function prologue. We do it once and for |
| all in the early startup assembly code, so enabling this option |
| makes u-boot a bit faster and smaller. |
| |
| The assembly parts have always been position-independent, so no code |
| changes should be necessary. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 5374b36de91d006d1df9536259fa9f66b01aa3aa |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Sat Nov 18 17:24:31 2006 +0100 |
| |
| AVR32: Use avr32-linux- cross-compilation prefix by default |
| |
| It doesn't really matter which toolchain you use to compile u-boot, |
| but the avr32-linux one is probably what most people have installed. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit c841beeddebece0039e724fb27f4d1a39ee1c6b6 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Sat Nov 18 17:15:30 2006 +0100 |
| |
| AVR32: Split start_u_boot into board_init_f and board_init_r |
| |
| Split the avr32 initialization code into a function to run before |
| relocation, board_init_f and a function to run after relocation, |
| board_init_r. For now, board_init_f simply calls board_init_r |
| at the end. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 37403005cfe6bb13964d450f6a48a0b0f2f7017e |
| Author: Heiko Schocher <hs@pollux.denx.de> |
| Date: Sat Apr 14 05:26:48 2007 +0200 |
| |
| [Fix] Set the LED status register on the UC101 for the LXT971 PHY. |
| clear the Display after reset. |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit 7882751c78b7ecabfd49b0eff8de27661c71f16c |
| Author: Denis Peter <d.peter@mpl.ch> |
| Date: Fri Apr 13 09:13:33 2007 +0200 |
| |
| [PATCH] Fix bugs in cmd_ide.c and cmd_scsi.c |
| |
| Fix bug introduced by "Fix get_partition_info() parameter error in all |
| other calls" from 2005-03-04 in cmd_ide.c and cmd_scsi.c, which prevented |
| to use diskboot or scsiboot form another device than 0. |
| |
| Signed-off-by: Denis Peter <d.peter@mpl.ch> |
| |
| commit 0b94504d22e70f537c17a0d38c87edb6e370977d |
| Author: Greg Lopp <lopp@pobox.com> |
| Date: Fri Apr 13 08:02:24 2007 +0200 |
| |
| [PATCH] Fix use of "void *" for block dev read/write buffer pointers |
| |
| Signed-of-by: Greg Lopp <lopp@pobox.com> |
| Acked-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 6fbf261f8df294e589cfadebebe5468e3c0f29e9 |
| Author: Xie Xiaobo <r63061@freescale.com> |
| Date: Fri Mar 9 19:08:25 2007 +0800 |
| |
| Fix two bugs for MPC83xx DDR2 controller SPD Init |
| |
| There are a few bugs in the cpu/mpc83xx/spd_sdram.c |
| the first bug is that the picos_to_clk routine introduces a huge |
| rounding error in 83xx. |
| the second bug is that the mode register write recovery field is |
| tWR-1, not tWR >> 1. |
| |
| commit 2ad3aba01d37b72e7c957b07e102fccd64fe6d13 |
| Author: Jeffrey Mann <mannj@embeddedplanet.com> |
| Date: Thu Apr 12 14:15:59 2007 +0200 |
| |
| ppc4xx: Fix i2c divisor calcularion for PPC4xx |
| |
| This patch fixes changes the i2c_init(...) function to use the function |
| get_OPB_freq() rather than calculating the OPB speed by |
| sysInfo.freqPLB/sysInfo.pllOpbDiv. The get_OPB_freq() function is |
| specific per processor. The prior method was not and so was calculating |
| the wrong speed for some PPC4xx processors. |
| |
| Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 6c9ba919375db977aaad9146bf320c7afd07ae7a |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Apr 11 17:25:01 2007 +0200 |
| |
| Update CHANGELOG |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 51056dd9863e6a1bc363afbbe1775c58cd967418 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Apr 11 17:22:55 2007 +0200 |
| |
| Update for SC3 board |
| |
| * Make IDE timeout configurable through ide_reset_timeout variable. |
| * Use Newline as "password" string |
| * Use just a single partition in NAND flash |
| |
| commit 3d98b85800c80dc68227c8f10bf5c93456d6d054 |
| Author: Haiying Wang <haiying.wang@freescale.com> |
| Date: Mon Jan 22 12:37:30 2007 -0600 |
| |
| Add PIXIS FPGA support for MPC8641HPCN board. |
| |
| Move the 8641HPCN's PIXIS code to the new directory |
| board/freescale/common/ as it will be shared by |
| future boards not in the same processor family. |
| |
| Write a "pixis_reset" command that utilizes the FPGA |
| reset sequencer to support alternate soft-reset options |
| such as using the "alternate" flash bank, enabling |
| the watch dog, or choosing different CPU frequencies. |
| |
| Add documentation for the pixis_reset to README.mpc8641hpcn. |
| |
| Signed-off-by: Haiying Wang <haiying.wang@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 64dbbd40c58349b64f43fd33dbb5ca0adb67d642 |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Fri Apr 6 14:19:43 2007 -0400 |
| |
| Moved fdt command support code to fdt_support.c |
| |
| ...in preparation for improving the bootm command's handling of fdt blobs. |
| Also cleaned up some coding sloppiness. |
| |
| commit 6679f9299534e488a171a9bb8f9bb891de247aab |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Fri Apr 6 14:17:14 2007 -0400 |
| |
| libfdt: Make fdt_check_header() public |
| |
| Changed _fdt_check_header() to fdt_check_header() and made it part of |
| the interface - it is a useful routine. |
| |
| Also did some asthetics cleanup to the include files (headers). |
| |
| commit c0707ce65677650b5ceab0500ee50ae5168afef2 |
| Author: Aubrey Li <aubrey.adi@gmail.com> |
| Date: Thu Apr 5 18:34:06 2007 +0800 |
| |
| [Blackfin][PATCH] Kill off a bunch of common local prototypes |
| |
| commit 7b7e30aa64bb6657a1bfd32fdbdbfeb561e6a48d |
| Author: Aubrey Li <aubrey.adi@gmail.com> |
| Date: Thu Apr 5 18:33:04 2007 +0800 |
| |
| [Blackfin][PATCH] Fix dynamic CPLB generation issue |
| |
| commit 0445e3a264251d75b1be45ef713c70726a2952f0 |
| Author: Aubrey Li <aubrey.adi@gmail.com> |
| Date: Thu Apr 5 18:31:47 2007 +0800 |
| |
| [Blackfin][PATCH] minior cleanup |
| |
| commit 155fd766573981090e638b493d5857562151862e |
| Author: Aubrey Li <aubrey.adi@gmail.com> |
| Date: Thu Apr 5 18:31:18 2007 +0800 |
| |
| [Blackfin][PATCH] Fix copyright and update license |
| |
| commit 9fd437bbd75d282f899e1da50be20a2bf38450bc |
| Author: Aubrey Li <aubrey.adi@gmail.com> |
| Date: Thu Apr 5 18:30:25 2007 +0800 |
| |
| [Blackfin][PATCH] Add BF537 EMAC driver initialization |
| |
| commit 889256e8604e0c68db1d866d720894dffede9df6 |
| Author: Aubrey Li <aubrey.adi@gmail.com> |
| Date: Thu Apr 5 18:29:55 2007 +0800 |
| |
| [Blackfin][PATCH] call real the system synchronize instruction |
| |
| commit e0df1c921b788289564e4c1ee7120a6a9cd3ab05 |
| Author: Aubrey Li <aubrey.adi@gmail.com> |
| Date: Thu Apr 5 18:29:17 2007 +0800 |
| |
| [Blackfin][PATCH] remove asm/page.h as we do not actually use/want any of these definitions nor does any other arch include it |
| |
| commit dfeeab2cd680df047e68e723b246adf6f33bb556 |
| Author: Aubrey Li <aubrey.adi@gmail.com> |
| Date: Thu Apr 5 18:28:34 2007 +0800 |
| |
| [Blackfin][PATCH]: fix flash unaligned copy issue |
| |
| commit 443feb740584e406efa203af909fe2926608e8d5 |
| Author: Igor Marnat <marny@rambler.ru> |
| Date: Wed Mar 21 09:55:01 2007 +0300 |
| |
| Update usage of 'nc' in README.NetConsole |
| |
| Added information about usage of NetConsole on systems where the -l and -p |
| switches are mutually exclusive. |
| |
| Signed-off-by: Igor Marnat <marny@rambler.ru> |
| Signed-off-by: Ben Warren <bwarren@qstreams.com> |
| |
| commit 31c98a88228021b314c89ebb8104fb6473da4471 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Apr 4 02:09:30 2007 +0200 |
| |
| Minor coding style cleanup. |
| |
| commit 94abd7c0583ebe01e799b25f451201deeaab550d |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Apr 4 01:49:15 2007 +0200 |
| |
| Minor cleanup. |
| |
| commit 822af351ad2babc7d99033361a5fcacd30f6bc78 |
| Author: Rodolfo Giometti <giometti@enneenne.com> |
| Date: Tue Apr 3 14:27:18 2007 +0200 |
| |
| Support for the Philips ISP116x HCD (Host Controller Driver) |
| |
| Signed-off-by: Rodolfo Giometti <giometti@enneenne.com> |
| |
| commit edf5851be6c17c031d4f71dd5b0a12040b7c50c8 |
| Author: Markus Klotzbuecher <mk@denx.de> |
| Date: Tue Apr 3 14:27:08 2007 +0200 |
| |
| USB: cleanup monahans usb support. Remove dead code. |
| |
| Signed-off-by: Markus Klotzbuecher <mk@denx.de> |
| |
| commit a65c5768e5537530bd1780af3d3fddc3113a163c |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Apr 2 10:09:30 2007 +0200 |
| |
| ppc4xx: Change SysACE address on Katmai |
| |
| With this new base address of the Xilinx SystemACE controller |
| the Linux driver will be easier to adapt, since it can now be |
| mapped via the "normal" ioremap() call. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit aea03c4e8c3a21ce43d3faf48a6e6d474c8bdf73 |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Sat Mar 31 14:30:53 2007 -0400 |
| |
| Fix some minor whitespace violations. |
| |
| commit 213bf8c822de8eecaf69860684469cdaba2e9e6a |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Sat Mar 31 12:23:51 2007 -0400 |
| |
| Add a flattened device tree (fdt) command (2 of 2) |
| |
| Modifications to the existing code to support the new fdt command. |
| |
| commit 781e09ee6e3e3e392ab362c1f0ef1068adc76e3e |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Sat Mar 31 12:22:10 2007 -0400 |
| |
| Add a flattened device tree (fdt) command (1 of 2) |
| |
| The fdt command uses David Gibson's libfdt library to manipulate as well |
| as print the flattened device tree. This patch is the new command, |
| the second part is the modifications to the existing code. |
| |
| commit 3af0d587d93e0be5f96e1b30fa41e662f8b0803e |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Sat Mar 31 12:13:43 2007 -0400 |
| |
| libfdt: Enhanced and published fdt_next_tag() |
| |
| Enhanced the formerly private function _fdt_next_tag() to allow stepping |
| through the tree, used to produce a human-readable dump, and made |
| it part of the published interface. |
| Also added some comments. |
| |
| commit fa3a74cec73dfd06a5ae35a9a3368200273aaa71 |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Sat Mar 31 12:05:39 2007 -0400 |
| |
| libfdt: Customizations for use by u-boot. |
| |
| Changes to David Gibson's original source to fit into u-boot's |
| environment. No functionality changes. |
| |
| commit 35748177c64a4a83a00057e93bb33e40278a2a96 |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Sat Mar 31 12:00:56 2007 -0400 |
| |
| libfdt: Import libfdt source (2 of 2) |
| |
| This adds the applicable libfdt source files (unmodified) and a README |
| to explain where the source came from. |
| |
| commit 7cd5da0fe877e7171a4cdd44880bce783132871a |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Sat Mar 31 11:59:59 2007 -0400 |
| |
| libfdt: Import libfdt source (1 of 2) |
| |
| This adds the applicable libfdt source files (unmodified) and a README |
| to explain where the source came from. |
| |
| commit da6ebc1bc082cbe3b6bbde079cafe09f7ebbad4b |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Mar 31 13:16:23 2007 +0200 |
| |
| ppc4xx: Update Katmai bootstrap command |
| |
| Now the DDR2 frequency is also 2*PLB frequency when 166MHz PLB |
| is selected. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit cabee756a6532986729477c3cc1ea16ef8517ad2 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Mar 31 13:15:06 2007 +0200 |
| |
| ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe) |
| |
| Additional RAM information is now printed upon powerup, like |
| DDR2 frequency and CAS latency. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 60723803431ac75cad085690789e433d5ab9174e |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Mar 31 08:48:36 2007 +0200 |
| |
| ppc4xx: Change Yucca config file to support ECC |
| |
| With the updated 44x DDR2 driver the Yucca board now supports |
| ECC generation and checking. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 490e5730c674b20d708b783a2c5ffd7208f83873 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Mar 31 08:47:34 2007 +0200 |
| |
| ppc4xx: Fix "bootstrap" command for Katmai board |
| |
| The board specific "bootstrap" command is now fixed and can |
| be used for the AMCC Katmai board to configure different |
| CPU/PLB/OPB frequencies. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 94f54703c3a776ec23e427ca2a16e0a79a5d50c1 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Mar 31 08:46:08 2007 +0200 |
| |
| ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe) |
| |
| Fix a bug in the auto calibration routine. This driver now runs |
| more reliable with the tested modules. It's also tested with |
| 167MHz PLB frequency (667MHz DDR2 frequency) on the Katmai. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 342cd097be1e7affe82f42ab3da220959a699e64 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Fri Mar 30 22:52:09 2007 +0200 |
| |
| [PATCH] Clean include dependence |
| |
| commit 6f934210fb293fde2cfb4251c6d96fdc58b6a906 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Fri Mar 30 22:42:45 2007 +0200 |
| |
| [CLEAN] Remove inefficient Suzaku code |
| |
| commit 430f1b0f9a670c2f13eaa52e66a10db96dd3647d |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Mar 28 15:03:16 2007 +0200 |
| |
| Merge some AMCC make targets to keep the top-level Makefile smaller |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 0c75c9d84307a9f1cbe1ff0c4d8937ee3a96475e |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Mar 28 14:52:12 2007 +0200 |
| |
| i2c: Enable "old" i2c commands even when CONFIG_I2C_CMD_TREE is defined |
| |
| The "old" i2c commands (iprobe, imd...) are now compiled in again, |
| even when the i2c command tree is enabled via the CONFIG_I2C_CMD_TREE |
| config option. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 5da048adf44bea5e3b94080d02903c2e3fe7aa4a |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Tue Mar 27 00:32:16 2007 +0200 |
| |
| PATCH: Resolve GPL license problem |
| |
| commit ae00bb4b2944dc64a485ed72a19754b11af7c223 |
| Author: Rodolfo Giometti <giometti@enneenne.com> |
| Date: Mon Mar 26 12:03:36 2007 +0200 |
| |
| PXA: pxa27x USB OHCI support |
| |
| Signed-off-by: Rodolfo Giometti <giometti@linux.it> |
| |
| commit ae79f60677c208326535647dcbd5c3ec40dbcb0b |
| Author: Markus Klotzbuecher <mk@denx.de> |
| Date: Mon Mar 26 11:21:05 2007 +0200 |
| |
| USB: remove the S3C24X0_merge #define, which was introduced while |
| merging OHCI drivers. |
| |
| Signed-off-by: Markus Klotzbuecher <mk@denx.de> |
| |
| commit 1798049522f594013aea29457d46794298c6ae15 |
| Author: Michal Simek <root@monstr.eu> |
| Date: Mon Mar 26 01:39:07 2007 +0200 |
| |
| Support for XUPV2P board |
| Reset support |
| BSP autoconfig support |
| |
| commit 0d974d5297349504a2ddfa09314be573b5df320a |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Mar 24 15:57:09 2007 +0100 |
| |
| [PATCH] Add 4xx GPIO functions |
| |
| This patch adds some 4xx GPIO functions. It also moves some of the |
| common code and defines into a common 4xx GPIO header file. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 2db633658bbf366ab0c8dad7a0727e1fb2ae6b11 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Mar 24 15:55:58 2007 +0100 |
| |
| [PATCH] Small Sequoia cleanup |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 3cb86f3e40d2a80356177434a99f75bc8baa9caf |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Mar 24 15:45:34 2007 +0100 |
| |
| [PATCH] Clean up 40EZ/Acadia support |
| |
| This patch cleans up all the open issue of the preliminary |
| Acadia support. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 6eb1df835191d8ce4b81d5af40fa8e0fbe78e997 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Dec 12 11:02:20 2006 -0600 |
| |
| Fix 8641HPCN problem with ld version 2.16 |
| |
| (Dot outside sections problem). |
| |
| This fix is in the spirit of 807d5d7319330e336ab34a5623c5e0d73b87d540. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 9964a4dd0d4ef5a037febaebf1aa494b1a72991c |
| Author: Haiying Wang <haiying.wang@freescale.com> |
| Date: Thu Dec 7 10:35:55 2006 -0600 |
| |
| Set Rev 2.x 86xx PIC in mixed mode. |
| |
| Prevent false interrupt from hanging Linux as MSR[EE] is set |
| to enable interrupts by changing the PIC out of the default |
| pass through mode into mixed mode. |
| |
| Signed-off-by: Haiying Wang <haiying.wang@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 5a58a73ceb0a4059c42ef64cedbc1a45e0aaa00e |
| Author: Jason Jin <jason.jin@freescale.com> |
| Date: Thu Dec 7 10:32:35 2006 -0600 |
| |
| Add flash cmd function to 8641HPCN ramboot |
| |
| Also fixes some commmand for 8641 HPCN ramboot case. |
| |
| Signed-off-by: Jason Jin <jason.jin@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 2ccceacc04b009d923afb7c26189ba2f8a2a5d46 |
| Author: Ed Swarthout <ed.swarthout@freescale.com> |
| Date: Thu Dec 7 10:34:14 2006 -0600 |
| |
| Add support for 8641 Rev 2 silicon. |
| |
| Without this patch, I am unable to get to the prompt on rev 2 silicon. |
| Only set ddrioovcr for rev1. |
| |
| Signed-off-by: Ed Swarthout<ed.swarthout@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 44ba464b99001f8bd1c456a1e9d59726252f707a |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Thu Mar 22 00:13:12 2007 +0100 |
| |
| Code cleanup / re-insert previous Copyright entries. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 2a8dfe08359a1b663418b2faa1da1d7bce34d302 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Mar 21 23:26:15 2007 +0100 |
| |
| Code cleanup. Update CHANGELOG |
| |
| commit e6615ecf4eaf4dd52696934aed8f5c6474cfd286 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Mar 21 14:54:29 2007 +0100 |
| |
| ppc4xx: Fix file mode of include/configs/acadia.h |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit d5f4614c9350d9333e575100fb250aab774d0258 |
| Author: Markus Klotzbuecher <mk@denx.de> |
| Date: Wed Mar 21 14:41:46 2007 +0100 |
| |
| SPC1920: fix small clock routing bug |
| |
| Signed-off-by: Markus Klotzbuecher <mk@denx.de> |
| |
| commit 16c0cc1c82081a493ab87c51980b28336ce1bce8 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Mar 21 13:39:57 2007 +0100 |
| |
| [PATCH] Add AMCC Acadia (405EZ) eval board support |
| |
| This patch adds support for the new AMCC Acadia eval board. |
| |
| Please note that this Acadia/405EZ support is still in a beta stage. |
| Still lot's of cleanup needed but we need a preliminary release now. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit e01bd218b00af73499331a1a701625a852cd286f |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Mar 21 13:38:59 2007 +0100 |
| |
| [PATCH] Add AMCC PPC405EZ support |
| |
| This patch adds support for the new AMCC 405EZ PPC. It is in |
| preparation for the AMCC Acadia board support. |
| |
| Please note that this Acadia/405EZ support is still in a beta stage. |
| Still lot's of cleanup needed but we need a preliminary release now. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 07e82cb2e284a893df6693f2a1337ab2c47bf6a1 |
| Author: Heiko Schocher <hs@pollux.denx.de> |
| Date: Wed Mar 21 08:45:17 2007 +0100 |
| |
| [PATCH] TQM8272: dont change the bits given from the HRCW |
| for the SIUMCR and BCR Register. |
| Fix the calculation for the EEprom Size |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit 654589873dbafcf104dff133ce0d03a4506e9cc3 |
| Author: Aubrey Li <aubrey.adi@gmail.com> |
| Date: Tue Mar 20 18:16:24 2007 +0800 |
| |
| [Blackfin][PATCH] Add BF561 EZKIT board support |
| |
| commit a6154fd1cfd020f6da8527e0365b1020a11a71d0 |
| Author: Aubrey Li <aubrey.adi@gmail.com> |
| Date: Mon Mar 19 22:55:58 2007 +0800 |
| |
| [Blackfin][PATCH] minor cleanup |
| |
| commit 389b6bb50f745bf5038ce030300d8a8512e96f79 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Mon Mar 19 13:10:08 2007 +0100 |
| |
| Remove obsoleted POST files. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 8e709bbb2636b5670a8f2b575e138eb1f55773f6 |
| Author: Aubrey Li <aubrey.adi@gmail.com> |
| Date: Mon Mar 19 01:26:11 2007 +0800 |
| |
| [PATCH] Add flash chip M29W320ET/B support |
| |
| commit 26bf7deca364a5b33f39e8f14ddd3f4081345015 |
| Author: Aubrey Li <aubrey.adi@gmail.com> |
| Date: Mon Mar 19 01:24:52 2007 +0800 |
| |
| [Blackfin][PATCH] Add BF537 stamp board support |
| |
| commit 8423e5e31a7235d05a482627315fb11d49c17bd7 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Mar 16 21:11:42 2007 +0100 |
| |
| [PATCH] Use dynamic SDRAM TLB setup on AMCC Ebony eval board |
| |
| Define CONFIG_PROG_SDRAM_TLB so that the TLB entries for the |
| DDR memory are dynamically programmed matching the total size |
| of the equipped memory (DIMM modules). |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 76d1466f918b881cda2d259254761e73885093c2 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Tue Mar 13 13:38:05 2007 +0100 |
| |
| [PATCH] renamed environment variable 'addcon' to 'addcons' for PCI405 |
| boards in terms of unification. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit a7090b993d3d4d2221ac3f33e6cb1d1b2ccc6bf0 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Mar 13 16:05:55 2007 +0100 |
| |
| Make SC3 board build with 'make O='; use 'addcons' consistently |
| (SC3 and Jupiter used to use 'addcon' instead). |
| |
| Signed-off-by: Wolfgang Denk wd@denx.de |
| |
| commit 8502e30a28e492c756ea2d7df0ace026388fce4b |
| Author: Heiko Schocher <hs@pollux.denx.de> |
| Date: Tue Mar 13 09:40:59 2007 +0100 |
| |
| [PATCH] update board config for jupiter Board: |
| added Hush Shell, |
| CONFIG_CMDLINE_EDITING, |
| CFG_ENV_ADDR_REDUND activated |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit 0d93de11449390a5984b0236c3612e50f6dbb7e8 |
| Author: Aubrey Li <aubrey.adi@gmail.com> |
| Date: Mon Mar 12 12:11:55 2007 +0800 |
| |
| [Blackfin][PATCH] minor cleanup |
| |
| commit bfa5754a58477ac917d21527cd0f079d87cf188e |
| Author: Aubrey Li <aubrey.adi@gmail.com> |
| Date: Mon Mar 12 01:42:06 2007 +0800 |
| |
| [Blackfin][PATCH] Fix BUILD_DIR option of MAKEALL building issue |
| |
| commit 8440bb14581a294375c34b91b42512f9753d1130 |
| Author: Aubrey Li <aubrey.adi@gmail.com> |
| Date: Mon Mar 12 00:25:14 2007 +0800 |
| |
| [Blackfin][PATCH] code cleanup |
| |
| commit cfc67116a706fd18b8f6a9c11a16753c5626d689 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Sun Mar 11 13:48:24 2007 +0100 |
| |
| [Microblaze][PATCH] part 2 |
| timer support |
| interrupt controller support |
| flash support |
| ethernet support |
| cache support |
| board information support |
| env support |
| booting image support |
| |
| adding support for Xilinx ML401 |
| |
| commit 76316a318de91f6184e7c22a10e02d275ade2441 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Sun Mar 11 13:42:58 2007 +0100 |
| |
| [Microblaze][PATCH] |
| timer support |
| interrupt controller support |
| flash support |
| ethernet support |
| cache support |
| board information support |
| env support |
| booting image support |
| |
| adding support for Xilinx ML401 |
| |
| commit 8db13d63157811c839d15a313d9f2d2f5fd10af3 |
| Author: Aubrey Li <aubrey.adi@gmail.com> |
| Date: Sat Mar 10 23:49:29 2007 +0800 |
| |
| [Blackfin][PATCH] code cleanup |
| |
| commit ef26a08fef928b7bc11ae2c109e638dc3a016d91 |
| Author: Aubrey.Li <aubrey.adi@gmail.com> |
| Date: Fri Mar 9 13:40:56 2007 +0800 |
| |
| [Blackfin][PATCH-2/2] Common files changed to support bf533 platform |
| |
| commit 3f0606ad0b5639f7f22848fe5b4574e754d0470f |
| Author: Aubrey.Li <aubrey.adi@gmail.com> |
| Date: Fri Mar 9 13:38:44 2007 +0800 |
| |
| [Blackfin]PATCH-1/2]: Remove obsolete blackfin port and add bf533 platform support |
| |
| commit 992423ab43c2bcf6b704853bd00af77450915e20 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Mar 8 23:00:08 2007 +0100 |
| |
| ppc4xx: Fix file mode of sequoia.c |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit eb92f613556800f7483666db09d9a237ad911d4a |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Thu Mar 8 22:52:51 2007 +0100 |
| |
| Minor cleanup. |
| |
| commit 8ce16f55c7b9752af3d8bed84521aec5337e2de1 |
| Author: John Otken john@softadvances.com <john@softadvances.com> |
| Date: Thu Mar 8 09:39:48 2007 -0600 |
| |
| ppc4xx: Clear Sequoia/Rainier security engine reset bits |
| |
| Signed-off-by: John Otken john@softadvances.com <john@softadvances.com> |
| |
| commit 650a330dd2539130c8c324791e2f9f75aed79d4e |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Thu Mar 8 16:26:52 2007 +0100 |
| |
| [PATCH] I2C: add some more SPD eeprom decoding for DDR2 modules |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit d9fc703246840c4b268debf48c334ba55c597dc0 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Thu Mar 8 16:25:47 2007 +0100 |
| |
| [PATCH] I2C: disable flat i2c commands when CONFIG_I2C_CMD_TREE is defined |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit ced5b9029043397348cdc88e0cfcd6b1f629250b |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Thu Mar 8 16:23:11 2007 +0100 |
| |
| [PATCH] 4xx: allow CONFIG_I2C_CMD_TREE without CONFIG_I2C_MULTI_BUS |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit d8a8ea5c476d37006fc7f85b7f903142795c8b14 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Thu Mar 8 16:20:32 2007 +0100 |
| |
| [PATCH] I2C: Add missing default CFG_SPD_BUS_NUM |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit f9fc6a5852a6335840882fa2111925010eea1abe |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Wed Mar 7 15:32:01 2007 +0100 |
| |
| fixed ethernet phy configuration for plu405 board |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit 769104c9356594deb2092e204a39c05b33202d6c |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Thu Mar 8 21:49:27 2007 +0100 |
| |
| Minor cleanup |
| |
| commit 00cdb4ce5e1b42248e7e6522ad0da3421b988afa |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Mar 8 10:13:16 2007 +0100 |
| |
| [PATCH] Update AMCC Luan 440SP eval board support |
| |
| The AMCC Luan now uses the common 440SP(e) DDR SPD code for DDR |
| inititializition. This includes DDR auto calibration and support |
| for different DIMM modules, instead of the fixed setup used in |
| the earlier version. |
| |
| This patch also enables the cache in FLASH for the startup |
| phase of U-Boot (while running from FLASH). After relocating to |
| SDRAM the cache is disabled again. This will speed up the boot |
| process, especially the SDRAM setup, since there are some loops |
| for memory testing (auto calibration). |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 2f5df47351910a2936c7741cf111855829200943 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Mar 8 10:10:18 2007 +0100 |
| |
| [PATCH] Update AMCC Yucca 440SPe eval board support |
| |
| The AMCC Yucca now uses the common 440SP(e) DDR SPD code for DDR |
| inititializition. This includes DDR auto calibration and support |
| for different DIMM modules, instead of the fixed setup used in |
| the earlier version. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 2721a68a9ea91f1e494649ce68b2577261f578e2 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Mar 8 10:07:18 2007 +0100 |
| |
| ppc4xx: Small AMCC Katmai 440SPe update |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit df294497479b1dca6dd86318b2a912f72fede0df |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Mar 8 10:06:09 2007 +0100 |
| |
| ppc4xx: Update 440SP/440SPe DDR SPD setup code to support 440SP |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 83853178bd36bca6f0f8f1331476620c84a587fc |
| Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Date: Wed Mar 7 12:14:50 2007 -0600 |
| |
| net - Support ping reply when processing net-loop |
| |
| Add ICMP_ECHO_REQUEST packet support by responding with a ICMP_ECHO_REPLY. |
| |
| This permits the ping command to test the phy interface when the phy |
| is put in loopback mode (typically by setting register 0 bit 14). |
| |
| It also allows the port to respond to an external ping when u-boot is |
| processing some other net command (such as tftp). This is useful when |
| tftp appears to hang. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Signed-off-by: Ben Warren <bwarren@qstreams.com> |
| |
| commit fa1aef15bcd47736687be1af544506e90fba545d |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Mar 7 16:43:00 2007 +0100 |
| |
| [PATCH] Use dynamic SDRAM TLB setup on AMCC Ocotea eval board |
| |
| Define CONFIG_PROG_SDRAM_TLB so that the TLB entries for the |
| DDR memory are dynamically programmed matching the total size |
| of the equipped memory (DIMM modules). |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit e2ebe696818939e2b974628be9c921ea3fe9de13 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Mar 7 16:39:36 2007 +0100 |
| |
| [PATCH] Fix AMCC 44x SPD SDRAM init code to support 2 DIMM's |
| |
| This patch fixes a problem that occurs when 2 DIMM's are |
| used. This problem was first spotted and fixed by Gerald Jackson |
| <gerald.jackson@reaonixsecurity.com> but this patch fixes the |
| problem in a little more clever way. |
| |
| This patch also adds the nice functionality to dynamically |
| create the TLB entries for the SDRAM (tlb.c). So we should |
| never run into such problems with wrong (too short) TLB |
| initialization again on these platforms. |
| |
| As this feature is new to the "old" 44x SPD DDR driver, it |
| has to be enabled via the CONFIG_PROG_SDRAM_TLB define. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 39218433983417b9df087976a79e3f80dd5e83d6 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Mar 7 16:33:44 2007 +0100 |
| |
| UC101: fix compiler warnings |
| |
| commit 8d7e2732221bc2d64df14f700c64c23e0a4c3dce |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Wed Mar 7 16:19:46 2007 +0100 |
| |
| HMI1001: fix build error, cleanup compiler warnings. |
| |
| commit ad5bb451ade552c44bef9119d907929ebc2c126f |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Tue Mar 6 18:08:43 2007 +0100 |
| |
| Restructure POST directory to support of other CPUs, boards, etc. |
| |
| commit a5284efd125967675b2e9c6ef7b95832268ad360 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Tue Mar 6 18:01:47 2007 +0100 |
| |
| Fix HOSTARCH handling. |
| Patch by Mike Frysinger, Mar 05 2007 |
| |
| commit 07b7b0037aac5102939917d7cbe561b5c0d5aa44 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Mar 6 07:47:04 2007 +0100 |
| |
| [PATCH] Speed optimization of AMCC Sequoia/Rainier DDR2 setup |
| |
| As provided by the AMCC applications team, this patch optimizes the |
| DDR2 setup for 166MHz bus speed. The values provided are also save |
| to use on a "normal" 133MHz PLB bus system. Only the refresh counter |
| setup has to be adjusted as done in this patch. |
| |
| For this the NAND booting version had to include the "speed.c" file |
| from the cpu/ppc4xx directory. With this addition the NAND SPL image |
| will just fit into the 4kbytes of program space. gcc version 4.x as |
| provided with ELDK 4.x is needed to generate this optimized code. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 647d3c3eed0da1d1505eecabe0b0fab96f956e68 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Sun Mar 4 01:36:05 2007 +0100 |
| |
| Some code cleanup. |
| |
| commit 781e026c8aa6f7e9eb5f0e72cc4d20971219b148 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Wed Feb 28 00:02:04 2007 -0600 |
| |
| mpc83xx: fix implicit declaration of function 'ft_get_prop' warnings |
| |
| (cherry picked from c5bf13b02284c3204a723566a9bab700e5059659 commit) |
| |
| commit 4feab4de7bfc2cb2fed36ad76f93c3a69659bbaf |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Tue Feb 27 23:51:42 2007 -0600 |
| |
| mpc83xx: Fix config of Arbiter, System Priority, and Clock Mode |
| |
| The config value for: |
| * CFG_ACR_PIPE_DEP |
| * CFG_ACR_RPTCNT |
| * CFG_SPCR_TSEC1EP |
| * CFG_SPCR_TSEC2EP |
| * CFG_SCCR_TSEC1CM |
| * CFG_SCCR_TSEC2CM |
| |
| Were not being used when setting the appropriate register |
| |
| Added: |
| * CFG_SCCR_USBMPHCM |
| * CFG_SCCR_USBDRCM |
| * CFG_SCCR_PCICM |
| * CFG_SCCR_ENCCM |
| |
| To allow full config of the SCCR. |
| |
| Also removed random CFG_SCCR settings in MPC8349EMDS, TQM834x, and sbc8349 |
| that were just bogus. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit d51b3cf371cd441030460ef19d36b2924c361b1a |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Thu Feb 22 20:06:57 2007 -0600 |
| |
| mpc83xx: update [local-]mac-address properties on UEC based devices |
| |
| 8360 and 832x weren't updating their [local-]mac-address |
| properties. This patch fixes that. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 61f4f912acbe60776c5e00df1ec94094ce672957 |
| Author: Timur Tabi <timur@freescale.com> |
| Date: Tue Feb 13 10:41:42 2007 -0600 |
| |
| mpc83xx: write MAC address to mac-address and local-mac-address |
| |
| Some device trees have a mac-address property, some have local-mac-address, |
| and some have both. To support all of these device trees, this patch |
| updates ftp_cpu_setup() to write the MAC address to mac-address if it exists. |
| This function already updates local-mac-address. |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| |
| commit 22d71a71f57fd5d38b27ac3848e50d790360a598 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Tue Feb 27 18:41:08 2007 -0600 |
| |
| mpc83xx: add command line editing by default |
| |
| commit 3fc0bd159103b536e1c54c6f4457a09b3aba66ca |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Wed Feb 14 19:50:53 2007 -0600 |
| |
| mpc83xx: Disable G1TXCLK, G2TXCLK h/w buffers |
| |
| Disable G1TXCLK, G2TXCLK h/w buffers. This patch |
| fixes a networking timeout issue with MPC8360EA (Rev.2) PBs. |
| |
| Verified on Rev. 1.1, Rev. 1.2, and Rev. 2.0 boards. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| Signed-off-by: Emilian Medve <Emilian.Medve@freescale.com> |
| |
| commit d61853cf2472e0b8bcbd131461a93d1c49ff0c1f |
| Author: Xie Xiaobo <r63061@freescale.com> |
| Date: Wed Feb 14 18:27:17 2007 +0800 |
| |
| mpc83xx: Add DDR2 controller fixed/SPD Init for MPC83xx |
| |
| The code supply fixed and SPD initialization for MPC83xx DDR2 Controller. |
| it pass DDR/DDR2 compliance tests. |
| |
| Signed-off-by: Xie Xiaobo <X.Xie@freescale.com> |
| |
| commit b110f40bd180c6b560276589beedf753e97c46ce |
| Author: Xie Xiaobo <r63061@freescale.com> |
| Date: Wed Feb 14 18:27:06 2007 +0800 |
| |
| mpc83xx: Add the cpu specific code for MPC8360E rev2.0 MDS |
| |
| MPC8360E rev2.0 have new spridr,and PVR value, |
| The MDS board for MPC8360E rev2.0 has 32M bytes Flash and 256M DDR2 DIMM. |
| |
| Signed-off-by: Xie Xiaobo <X.Xie@freescale.com> |
| |
| commit 8d172c0f0d85998a256a95b7459a5403a30380ed |
| Author: Xie Xiaobo <r63061@freescale.com> |
| Date: Wed Feb 14 18:26:44 2007 +0800 |
| |
| mpc83xx: Add the cpu and board specific code for MPC8349E rev3.1 MDS |
| |
| MPC8349E rev3.1 have new spridr,and PVR value, |
| The MDS board for MPC8349E rev3.1 has 32M bytes Flash and 256M DDR2 DIMM. |
| |
| Signed-off-by: Xie Xiaobo<X.Xie@freescale.com> |
| |
| commit f6f5f709e5c8e4564c4dfeecfdf2279244f9c83b |
| Author: Joakim Tjernlund <joakim.tjernlund@transmode.se> |
| Date: Wed Jan 31 11:04:19 2007 +0100 |
| |
| mpc83xx: Fix empty i2c reads/writes in fsl_i2c.c |
| |
| Fix empty i2c reads/writes, i2c_write(0x50, 0x00, 0, NULL, 0) |
| which is used to se if an slave will ACK after receiving its address. |
| |
| Correct i2c probing to use this method as the old method could upset |
| a slave as it wrote a data byte to it. |
| |
| Add a small delay in i2c_init() to let the controller |
| shutdown any ongoing I2C activity. |
| |
| Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> |
| |
| commit 7a78f148d6a7298e4fface680dc7eacd877b1aba |
| Author: Timur Tabi <timur@freescale.com> |
| Date: Wed Jan 31 15:54:29 2007 -0600 |
| |
| mpc83xx: Add support for the MPC8349E-mITX-GP |
| |
| Add support for the MPC8349E-mITX-GP, a stripped-down version of the |
| MPC8349E-mITX. Bonus features include support for low-boot (BMS bit in |
| HRCW is 0) for the ITX and a README for the ITX and the ITX-GP. |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| |
| commit fab16807adad350f618024350c6950165c247c72 |
| Author: Timur Tabi <timur@freescale.com> |
| Date: Wed Jan 31 15:54:20 2007 -0600 |
| |
| mpc83xx: Delete sdram_init() for MPC8349E-mITX |
| |
| There is no SDRAM on any of the 8349 ITX variants, so function sdram_init() |
| never does anything. This patch deletes it. |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| |
| commit a87c856eb411b9365937d0d4b9c21e46adbe1c14 |
| Author: Dave Liu <daveliu@freescale.com> |
| Date: Fri Jan 19 10:43:26 2007 +0800 |
| |
| mpc83xx: Fix the LAW1/3 bug |
| |
| The patch solves the alignment problem of the local bus access windows to |
| render accessible the memory bank and PHY registers of UPC 1 (starting at |
| 0xf801 0000). What we actually did was to adjust the sizes of the bus |
| access windows so that the base address alignment requirement would be met. |
| |
| Signed-off-by: Chereji Marian <marian.chereji@freescale.com> |
| Signed-off-by: Gridish Shlomi <gridish@freescale.com> |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| |
| commit 97c4b397dce236a7318b304667bf89e59d08b17c |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Tue Jan 30 16:15:31 2007 -0600 |
| |
| mpc83xx: don't hang if watchdog configured on 8360, 832x |
| |
| don't hang if watchdog configured on 8360, 832x |
| |
| The watchdog programming model is the same across all 83xx devices; |
| make the code reflect that. |
| |
| commit b70047478570e371ce7223be342ce98afea0f7d6 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Tue Jan 30 16:15:21 2007 -0600 |
| |
| mpc83xx: protect memcpy to bad address if a local-mac-address is missing from dt |
| |
| protect memcpy to bad address if a local-mac-address is missing from dt |
| |
| commit 6752ed088c75c26a89b70c46b7326a4cd6015f29 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Tue Jan 30 16:15:04 2007 -0600 |
| |
| mpc83xx: make 8360 default environment fdt be 8360 (not 8349) |
| |
| make 8360 default environment fdt be 8360 (not 8349) |
| |
| commit a28899c910024a0226331df07207b1038c300c93 |
| Author: Emilian Medve <Emilian.Medve@freescale.com> |
| Date: Tue Jan 30 16:14:50 2007 -0600 |
| |
| mpc83xx: Fix alternating tx error / tx buffer not ready bug in QE UEC |
| |
| The problem is not gcc4 but the code itself. The BD_STATUS() macro can't |
| be used for busy-waiting since it strips the 'volatile' property from |
| the bd variable. gcc3 was working by pure luck. |
| |
| This is a follow on patch to "Fix the UEC driver bug of QE" |
| |
| commit 3e78a31cfe3d3022f46f67eb88e1281d5cc2eb89 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Tue Jan 30 14:08:30 2007 -0600 |
| |
| mpc83xx: Replace CONFIG_MPC8349 and use CONFIG_MPC834X instead |
| |
| The code that is ifdef'd with CONFIG_MPC8349 is actually applicable to all |
| MPC834X class processors. Change the protections from CONFIG_MPC8349 to |
| CONFIG_MPC834X so they are more generic. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit ae246dc6c1937c291014eadd90b6d48c438c7cb0 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Thu Jan 25 13:40:55 2007 -0600 |
| |
| mpc83xx: add MPC832XEMDS and sbc8349 to MAKEALL |
| |
| commit 4decd84e8f04279c5cfff7f8e907465ef8d8a3fb |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Wed Jan 24 17:18:37 2007 -0600 |
| |
| mpc83xx: sort Makefile targets |
| |
| reordered targets alphabetically |
| |
| commit 91e25769771c1164ed63ffca0add49f934ae3343 |
| Author: Paul Gortmaker <paul.gortmaker@windriver.com> |
| Date: Tue Jan 16 11:38:14 2007 -0500 |
| |
| mpc83xx: U-Boot support for Wind River SBC8349 |
| |
| I've redone the SBC8349 support to match git-current, which |
| incorporates all the MPC834x updates from Freescale since the 1.1.6 |
| release, including the DDR changes. |
| |
| I've kept all the SBC8349 files as parallel as possible to the |
| MPC8349EMDS ones for ease of maintenance and to allow for easy |
| inspection of what was changed to support this board. Hence the SBC8349 |
| U-Boot has FDT support and everything else that the MPC8349EMDS has. |
| |
| Fortunately the Freescale updates added support for boards using CS0, |
| but I had to change spd_sdram.c to allow for board specific settings for |
| the sdram_clk_cntl (it is/was hard coded to zero, and that remains the |
| default if the board doesn't specify a value.) |
| |
| Hopefully this should be mergeable as-is and require no whitespace |
| cleanups or similar, but if something doesn't measure up then let me |
| know and I'll fix it. |
| |
| Thanks, |
| Paul. |
| |
| commit 05031db456ab227f3e3752f37b9b812b65bb83ad |
| Author: Sam Song <samsongshu@yahoo.com.cn> |
| Date: Thu Dec 14 19:03:21 2006 +0800 |
| |
| mpc83xx: Remove a redundant semicolon in mpc8349itx.c |
| |
| A redundant semicolon existed in mpc8349itx.c |
| should be removed. |
| |
| Signed-off-by: Sam Song <samsongshu@yahoo.com.cn> |
| |
| commit f35f358241c549be3f75cfe2eaa642914275b7ba |
| Author: Jerry Van Baren <gerald.vanbaren@comcast.net> |
| Date: Wed Dec 6 21:23:55 2006 -0500 |
| |
| mpc83xx: Put the version (and magic) after the HRCW. |
| |
| Put the version (and magic) after the HRCW. This puts it in a fixed |
| location in flash, not at the start of flash but as close as we can get. |
| |
| Signed-off-by: Jerry Van Baren <vanbaren@cideas.com> |
| |
| commit 48aecd969171a6e99a55fae04933857787f9a5bd |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Thu Dec 7 21:14:51 2006 +0800 |
| |
| mpc83xx: Add the MPC832XEMDS board readme |
| |
| Add the MPC832XEMDS board readme |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| |
| commit 24c3aca3f1358b113d3215adb5433b156e99f72b |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Thu Dec 7 21:13:15 2006 +0800 |
| |
| mpc83xx: Add support for the MPC832XEMDS board |
| |
| This patch supports DUART, ETH3/4 and PCI etc. |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| |
| commit e080313c32322e15ab5a18eb896a252858c57284 |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Thu Dec 7 21:11:58 2006 +0800 |
| |
| mpc83xx: streamline the 83xx immr head file |
| |
| For better format and style, I streamlined the 83xx head files, |
| including immap_83xx.h and mpc83xx.h. In the old head files, 1) |
| duplicated macro definition appear in the both files; 2) the structure |
| of QE immr is duplicated in the immap_83xx.h and immap_qe.h; 3) The |
| macro definition put inside the each structure. So, I cleaned up the |
| structure of QE immr from immap_83xx.h, deleted the duplicated stuff and |
| moved the macro definition to mpc83xx.h, Just like MPC8260. |
| |
| CHANGELOG |
| |
| *streamline the 83xx immr head file |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| |
| commit ddd02492f43db5408f5ab9f823b0ba5796e28ef0 |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Wed Dec 6 11:38:17 2006 +0800 |
| |
| mpc83xx: Fix the UEC driver bug of QE |
| |
| The patch prevents the GCC tool chain from striping useful code for |
| optimization. It will make UEC ethernet driver workable, Otherwise the |
| UEC will fail in tx when you are using gcc4.x. but the driver can work |
| when using gcc3.4.3. |
| |
| CHANGELOG |
| |
| *Prevent the GCC from striping code for optimization, Otherwise the UEC |
| will tx failed when you are using gcc4.x. |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| |
| commit ba58e4c9a9a917ce795dd16d4ec8d515f9f7aa35 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Mar 1 21:11:36 2007 +0100 |
| |
| [PATCH] Update AMCC Katmai 440SPe eval board support |
| |
| This patch updates the recently added Katmai board support. The biggest |
| change is the support of ECC DIMM modules in the 440SP(e) SPD DDR2 |
| driver. |
| |
| Please note, that still some problems are left with some memory |
| configurations. See the driver for more details. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 8c12045a3b06c5b6675d3fe02fbc9f545988129a |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Mar 1 07:03:25 2007 +0100 |
| |
| [PATCH] I2C: Add missing default CFG_RTC_BUS_NUM & CFG_DTT_BUS_NUM |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit ccbc7036648e465697ca298ba51e0e76dda352a0 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Wed Feb 28 01:28:53 2007 +0100 |
| |
| SC3: fix typo in default environment |
| |
| commit e344568b1b46af85ec32d815586f91bc115d6223 |
| Author: Sergei Poselenov <sposelenov@emcraft.com> |
| Date: Tue Feb 27 20:15:30 2007 +0300 |
| |
| MCC200: Fixes for update procedure |
| |
| - fix logic error in image type handling |
| - make sure file system images (cramfs etc.) get stored in flash |
| with image header stripped so they can be mounted through MTD |
| |
| commit 743571145b37182757d4e688a77860b36ee77573 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Tue Feb 27 14:26:04 2007 +0100 |
| |
| Minor code cleanup. |
| |
| commit 638dd1458bbdc2a55d4b9e25c5c4e1f838a5dc72 |
| Author: Sergei Poselenov <sposelenov@emcraft.com> |
| Date: Tue Feb 27 12:40:16 2007 +0300 |
| |
| MCC200 update - add LCD Progress Indicator |
| |
| commit 6c7cac8c4fce0ea2bf8e15ed8658d87974155b44 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Feb 22 07:43:34 2007 +0100 |
| |
| [PATCH] get_dev() now unconditionally uses manual relocation |
| |
| Since the relocation fix is not included yet and we're not sure how |
| it will be added, this patch removes code that required relocation |
| to be fixed for now. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 8274ec0bd01d2feb2c7f095eba78d42ea009798b |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Feb 22 07:40:23 2007 +0100 |
| |
| [PATCH] Change systemace driver to select 8 & 16bit mode |
| |
| As suggested by Grant Likely this patch enables the Xilinx SystemACE |
| driver to select 8 or 16bit mode upon startup. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 3a197b2fe49d6fa03978e60af2394efe9c70b527 |
| Author: Haiying Wang <Haiying.Wang@freescale.com> |
| Date: Wed Feb 21 16:52:31 2007 +0100 |
| |
| [PATCH v3] Add sync to ensure flash_write_cmd is fully finished |
| |
| Some CPUs like PPC, BLACKFIN need sync() to ensure cfi flash write command |
| is fully finished. The sync() is defined in each CPU's io.h file. For |
| those CPUs which do not need sync for now, a dummy sync() is defined in |
| their io.h as well. |
| |
| Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> |
| |
| commit da04995c7dc6772013a9a0dc5c767f190c402478 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Feb 21 13:44:34 2007 +0100 |
| |
| [PATCH] Fix problem in systemace driver (ace_writew instead of ace_write) |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 751bb57107d78978ae08e697c3deba816f5be091 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Feb 20 13:21:57 2007 +0100 |
| |
| [PATCH] Fix relocation problem with "new" get_dev() function |
| |
| This patch enables the "new" get_dev() function for block devices |
| introduced by Grant Likely to be used on systems that still suffer |
| from the relocation problems (manual relocation neede because of |
| problems with linker script). |
| |
| Hopefully we can resolve this relocation issue soon for all platform |
| so we don't need this additional code anymore. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit d93e2212f962668b3dce091ff5edc33f2347fe37 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Feb 20 13:17:42 2007 +0100 |
| |
| [PATCH] Update SystemACE driver for 16bit access |
| |
| This patch removes some problems when the Xilinx SystemACE driver |
| is used with 16bit access on an big endian platform (like the |
| AMCC Katmai). |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 874bb7b88fe9b4648e1288a387af2e31014a72f3 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Feb 20 13:15:40 2007 +0100 |
| |
| [PATCH] Clean up Katmai (440SPe) linker script |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 4745acaa1a603b67f6b9b7970365ebadd7d6586f |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Feb 20 10:57:08 2007 +0100 |
| |
| [PATCH] Add support for the AMCC Katmai (440SPe) eval board |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 0dc018ece13effc689e47479ea9ebf1c98a507f5 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Feb 20 10:51:26 2007 +0100 |
| |
| [PATCH] I2C: Add support for multiple I2C busses for RTC & DTT |
| |
| This patch switches to the desired I2C bus when the date/dtt |
| commands are called. This can be configured using the |
| CFG_RTC_BUS_NUM and/or CFG_DTT_BUS_NUM defines. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 4037ed3b63923cfcec27f784a89057c3cbabcedb |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Feb 20 10:43:34 2007 +0100 |
| |
| [PATCH] PPC4xx: Add 440SP(e) DDR2 SPD DIMM support |
| |
| This patch adds support for the DDR2 controller used on the |
| 440SP and 440SPe. It is tested on the Katmai (440SPe) eval |
| board and works fine with the following DIMM modules: |
| |
| - Corsair CM2X512-5400C4 (512MByte per DIMM) |
| - Kingston ValueRAM KVR667D2N5/512 (512MByte per DIMM) |
| - Kingston ValueRAM KVR667D2N5K2/2G (1GByte per DIMM) |
| |
| This patch also adds the nice functionality to dynamically |
| create the TLB entries for the SDRAM (tlb.c). So we should |
| never run into such problems with wrong (too short) TLB |
| initialization again on these platforms. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 36d830c9830379045f5daa9f542ac1c990c70068 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Feb 20 10:35:42 2007 +0100 |
| |
| [PATCH] PPC4xx: Split 4xx SPD SDRAM init routines into 2 files |
| |
| Since the existing 4xx SPD SDRAM initialization routines for the |
| 405 SDRAM controller and the 440 DDR controller don't have much in |
| common this patch splits both drivers into different files. |
| |
| This is in preparation for the 440 DDR2 controller support (440SP/e). |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 79b2d0bb2eae09602448f7a7cb56530d2f31e6c6 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Feb 20 10:27:08 2007 +0100 |
| |
| [PATCH] PPC4xx: Add support for multiple I2C busses |
| |
| This patch adds support for multiple I2C busses on the PPC4xx |
| platforms. Define CONFIG_I2C_MULTI_BUS in the board config file |
| to make use of this feature. |
| |
| It also merges the 405 and 440 i2c header files into one common |
| file 4xx_i2c.h. |
| |
| Also the 4xx i2c reset procedure is reworked since I experienced |
| some problems with the first access on the 440SPe Katmai board. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit eb867a76238fb38e952c37871b16d0d7fd61c95f |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Feb 20 09:05:45 2007 +0100 |
| |
| [PATCH 9_9] Use "void *" not "unsigned long *" for block dev read_write buffer pointers |
| |
| Block device read/write is anonymous data; there is no need to use a |
| typed pointer. void * is fine. Also add a hook for block_read functions |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 53758fa20e935cc87eeb0519ed365df753a6f289 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Feb 20 09:05:38 2007 +0100 |
| |
| [PATCH 8_9] Add block_write hook to block_dev_desc_t |
| |
| Preparation for future patches which support block device writing |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit f4852ebe6ca946a509667eb68be42026f837be76 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Feb 20 09:05:31 2007 +0100 |
| |
| [PATCH 7_9] Replace ace_readw_ace_writeb functions with macros |
| |
| Register read/write does not need to be wrapped in a full function. The |
| patch replaces them with macros. |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 3a8ce9af6fcb5744a7851b4440c07688acc40844 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Feb 20 09:05:23 2007 +0100 |
| |
| [PATCH 6_9] Move common_cmd_ace.c to drivers_systemace.c |
| |
| The code in this file is not a command; it is a device driver. Put it in |
| the correct place. There are zero functional changes in this patch, it |
| only moves the file. |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 984618f3e7794c783ec8d1511e74c6ee2d69bfe4 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Feb 20 09:05:16 2007 +0100 |
| |
| [PATCH 5_9] Whitespace fixup on common_cmd_ace.c (using Lindent) |
| |
| This patch is in preparation of additional changes to the sysace driver. |
| May as well take this opportunity to fixup the inconsistent whitespace since |
| this file is about to undergo major changes anyway. |
| |
| There are zero functional changes in this patch. It only cleans up the |
| the whitespace. |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 80ba981d940471fe7e539e64fa3d2bd80002beda |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Feb 20 09:05:07 2007 +0100 |
| |
| [PATCH 4_4] Remove local implementation of isprint() in ft_build.c |
| |
| isprint is already defined in ctype.c |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit c95c4280d751ca078c2ff58228d2f2b44ccf0600 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Feb 20 09:05:00 2007 +0100 |
| |
| [PATCH 3_9] Move buffer print code from md command to common function |
| |
| Printing a buffer is a darn useful thing. Move the buffer print code |
| into print_buffer() in lib_generic/ |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 99b0f0fd3fbf2572ae1a7723dd90cffc8e85130a |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Feb 20 09:04:52 2007 +0100 |
| |
| [PATCH 2_4] Use config.h, not xparameters.h, for xilinx targets |
| |
| Change the xilinx device drivers and board code to include config.h |
| instead of xparameters.h directly. config.h always includes the |
| correct xparameters file. This change reduces the posibility of |
| including the wrong file when adding a new xilinx board port |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 735dd97b1b20e777d059c7b389fe9d70cd3f80c7 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Feb 20 09:04:34 2007 +0100 |
| |
| [PATCH 1_4] Merge common get_dev() routines for block devices |
| |
| Each of the filesystem drivers duplicate the get_dev routine. This change |
| merges them into a single function in part.c |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit f5fcc3c20b65554e98a165542c36ee0c610a2d81 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Mon Feb 19 23:09:51 2007 +0100 |
| |
| MCC200: Software Updater: allow both "ramdisk" and "filesystem" types |
| as root file system images. |
| |
| commit 489c696ae7211218961d159e43e722d74c36fcbc |
| Author: Sergei Poselenov <sposelenov@emcraft.com> |
| Date: Wed Feb 14 14:30:28 2007 +0300 |
| |
| MCC200: Extensions to Software Update Mechanism |
| |
| Update / extend Software Update Mechanism for MCC200 board: |
| |
| - Add support for rootfs image added. The environment variables |
| "rootfs_st" and "rootfs_nd" can be used to override the default |
| values of the image start and end. |
| - Remove excessive key check code. |
| - Code cleanup. |
| |
| commit 4be23a12f23f1372634edc3215137b09768b7949 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Feb 19 08:23:15 2007 +0100 |
| |
| [PATCH] Update Sequoia EBC configuration (NOR FLASH) |
| |
| As spotted by Matthias Fuchs, the READY input should not be |
| enabled for the NOR FLASH on the Sequoia board. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 2605e90bf676d48123afe5719a846d2b52b24aac |
| Author: Heiko Schocher <hs@pollux.denx.de> |
| Date: Fri Feb 16 07:57:42 2007 +0100 |
| |
| [PATCH] Added support for the jupiter board. |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit 497d012e5be0194e1084073d0081eb1a844796b2 |
| Author: Gary Jennejohn <garyj@pollux.denx.de> |
| Date: Mon Feb 12 13:11:50 2007 +0100 |
| |
| LPC2292: patch from Siemens. |
| |
| commit b0b1a920aebead0d44146e73676ae9d80fffc8e2 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Feb 10 08:49:31 2007 +0100 |
| |
| [PATCH] Add missing p3mx.h file to repository (ups) |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 53d4a4983fb9b3ae5f7b2f10c599aca2b1b4034a |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Fri Feb 9 10:45:42 2007 +0100 |
| |
| [Motion-PRO] Preliminary support for the Motion-PRO board. |
| |
| commit 5a753f98c6a01bd1c61a9a3f95e8329a35f62994 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Feb 7 16:51:08 2007 +0100 |
| |
| [PATCH] Update some AMCC 4xx board config files (set initrd_high) |
| |
| Some boards that can have more than 768MBytes of SDRAM need to |
| set "initrd_high", so that the initrd can be accessed by the |
| Linux kernel. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 7372ca68227930d03cffa548310524cad5b96733 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Feb 2 12:44:22 2007 +0100 |
| |
| [PATCH] Correctly display PCI arbiter en-/disabled on some 4xx boards |
| |
| Previously the strapping DCR/SDR was read to determine if the internal PCI |
| arbiter is enabled or not. This strapping bit can be overridden, so now |
| the current status is read from the correct DCR/SDR register. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 2aa54f651a42d198673318f07a20c89a43e4d197 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Feb 2 12:42:08 2007 +0100 |
| |
| [PATCH] Change configuration output of Sycamore, Yellowstone & Rainier |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 23744d6b5bf17592eb6a0ef4f318f6089f55993b |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Feb 1 13:22:41 2007 +0100 |
| |
| [PATCH] Remove PCI-PNP configuration from Sequoia/Rainier config file |
| |
| When PCI PNP is enabled the pci pnp configuration routine is called |
| which sets the PCI_CACHE_SIZE_LINE to 8. This seems to generate some |
| problems with some PCI cards. For now disable the PCI PNP configuration. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 2902fadade3be7659467e8d074048c6b7068f5c0 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Jan 31 16:56:10 2007 +0100 |
| |
| [PATCH] Update 440EPx/440GRx cpu detection |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit d5ea287b02a6945c3977410e364a879dd1a555c8 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Jan 31 16:38:04 2007 +0100 |
| |
| [PATCH] Update esd cpci5200 files |
| |
| Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com> |
| |
| commit 8b7d1f0ab7d7c4fe3160bbf74a7e9690d9f3a3ab |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Jan 31 16:37:34 2007 +0100 |
| |
| [PATCH] Add support for esd mecp5200 board |
| |
| Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com> |
| |
| commit 71a4e5fda8b60044ab9f46069fa1cfa26bdd07ff |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Jan 31 12:38:50 2007 +0100 |
| |
| [PATCH] Remove unneccessary yellowstone board config file |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit e802594b6fa1b166308820c276b96dc0d7cc731c |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Jan 30 17:06:10 2007 +0100 |
| |
| [PATCH] Update Sequoia (440EPx) config file |
| |
| The config file now handles the 2nd target, the Rainier (440GRx) |
| evaluation board better. Additionally the PPC input clock was |
| adjusted to match the correct value of 33.0 MHz. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 700200c67e73b83751418abe7815840dca8fd6cb |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Jan 30 17:04:19 2007 +0100 |
| |
| [PATCH] Merge Yosemite & Yellowstone board ports |
| |
| Now the AMCC eval boards Yosemite (440EP) and Yellowstone (440GR) |
| share one config file and all board specific files. This way we |
| don't have to maintain two different sets of files for nearly |
| identical boards. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 1bbf5eae322f5f1f6427ecc3ac13a0cb7dba8ad6 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Jan 30 15:01:49 2007 +0100 |
| |
| [PATCH] Update Prodrive SCPU (PDNB3 variant) board |
| |
| SCPU doesn't use redundant environment in flash. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 6304430ed642ea8fa15c9e5af965ac2e033eec45 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Jan 30 12:51:07 2007 +0100 |
| |
| [PATCH] alpr: Update alpr board config file |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit f8db84f132b1e335f20f96138a1f09ed97b08664 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Tue Jan 30 00:50:40 2007 +0100 |
| |
| LPC2292 SODIMM port coding style cleanup. |
| |
| commit 6bd2447ee47ee23c18d2b3c7ccd5a20f7626f5b3 |
| Author: Gary Jennejohn <garyj@pollux.denx.de> |
| Date: Wed Jan 24 12:16:56 2007 +0100 |
| |
| Add port for the lpc2292sodimm evaluation board from EmbeddedArtists |
| |
| commit 2daf046ba627f85f44195815778140039636244e |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Tue Jan 23 17:22:06 2007 +0100 |
| |
| [iDMR] Add MTD and JFFS2 support, also add default partition definition. |
| |
| commit f7db33101fbc9c8f0a10738ce87034875a17aeb9 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Tue Jan 23 14:21:14 2007 +0100 |
| |
| [iDMR] Flash driver on initialisation write-protects some sectors, |
| currently sectors 0-3. Sector 3 does not need to be protected, though |
| (U-boot occupies sectors 0-1 and the environment sector 2). This commit |
| fixes this, i.e., only sectors 0-2 are protected. |
| |
| commit 0ed47bb119cd2c4c16edb2548789148f9e6dc9de |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Tue Jan 23 14:11:22 2007 +0100 |
| |
| [iDMR] Using MII-related commands on iDRM board doesn't work now (e.g., |
| "mii device" results in "Unexpected exception"). Fixing this properly |
| requires some clean-up in the FEC drivers infrastructure for ColdFire, so |
| this commit disables MII commads for now. |
| |
| commit 363d1d8f9c99b63daef81f5985cab3fc00edde5c |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Tue Jan 23 13:25:22 2007 +0100 |
| |
| [ColdFire MCF5271 family] Add CPU detection based on the value of Chip |
| Identification Register (CIR). |
| |
| commit fdef388758506765d4d6a7155c8f1584c63ff581 |
| Author: roy zang <tie-fei.zang@freescale.com> |
| Date: Mon Jan 22 13:19:21 2007 +0800 |
| |
| use CFG_WRITE_SWAPPED_DATA define instead of define CFG_FLASH_CFI_SWAP |
| The patch by Heiko Schocher <hs@pollux.denx.de> on Jan, 19, 2007 |
| fixes cfi_driver bug for mpc7448hpc2 board. The default cfi_driver can support |
| mpc7448hpc2 board. |
| |
| commit a4012396645533aef218354eeba754dff0deace8 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Fri Jan 19 23:08:39 2007 +0100 |
| |
| Minor code cleanup. |
| |
| commit f539b7ba7d7ef6dd187c8209609001cb1cd95e39 |
| Author: Heiko Schocher <hs@pollux.denx.de> |
| Date: Fri Jan 19 19:57:10 2007 +0100 |
| |
| [PATCH] SC3 board: added CFG_CMD_AUTOSCRIPT. |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit d0b6e14087ddd8789f224a48e1d33f2a5df4d167 |
| Author: Heiko Schocher <hs@pollux.denx.de> |
| Date: Fri Jan 19 18:05:26 2007 +0100 |
| |
| [PATCH] CFI: define CFG_WRITE_SWAPPED_DATA for the CFI-Flash driver |
| if you must swap the bytes between reading/writing. |
| (Needed for the SC3 board) |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit 9d8d5a5bfb64768f29a0cb47fc37cd6f4c40e276 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Jan 18 16:05:47 2007 +0100 |
| |
| [PATCH] Add support for Prodrive SCPU (PDNB3 variant) board |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 0057d758e3e874cbe7f24745d0cce8c1cb6c207e |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Jan 18 11:54:52 2007 +0100 |
| |
| [PATCH] Update Prodrive P3Mx support |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 34167a36c29ee946b727465db5c014746a08e978 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Jan 18 11:48:10 2007 +0100 |
| |
| [PATCH] Add missing Taishan config file |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit cb4820725e9fc409c5cbc8e83054a6ed522d2111 |
| Author: Heiko Schocher <hs@pollux.denx.de> |
| Date: Thu Jan 18 11:28:51 2007 +0100 |
| |
| [PATCH] Fix: Compilerwarnings for SC3 board. |
| The EBC Configuration Register is now by CFG_EBC_CFG definable |
| Added JFFS2 support for the SC3 board. |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit 5fb692cae57d1710c8f52a427cf7f39a37383fcd |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Jan 18 10:25:34 2007 +0100 |
| |
| [PATCH] Add support for AMCC Taishan PPC440GX eval board |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 6d3e0107235aa0e6a6dcb77f9884497280bf85ad |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Tue Jan 16 18:30:50 2007 +0100 |
| |
| Raname solidcard3 into sc3; add redundant env for sc3 |
| |
| commit 1bbbbdd20fcec9933697000dcf55ff7972622596 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Tue Jan 16 12:46:35 2007 +0100 |
| |
| Update default environment for Solidcard3 |
| |
| commit 5a5c56986a9ccf71642c8b6374eb18487b15fecd |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Jan 15 09:46:29 2007 +0100 |
| |
| [PATCH] Fix 440SPe rev B detection from previous patch |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit a443d31410c571ee8f970da819a44d698fdd6b1f |
| Author: Heiko Schocher <hs@pollux.denx.de> |
| Date: Sun Jan 14 13:35:31 2007 +0100 |
| |
| [FIX] correct I2C Writes for the LM81 Sensor. |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit 0bba5452835f19a61204edcda3a58112fd8e2208 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Sat Jan 13 11:17:10 2007 +0100 |
| |
| Undo commit 3033ebb2: reset command does not take any arguments |
| |
| Haiying Wang's modification to the reset command was broken, undo it. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 95981778cff0038fd9941044d6a3eda810e33258 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Jan 13 08:01:03 2007 +0100 |
| |
| [PATCH] Update 440SP(e) cpu revisions |
| |
| Also display enabled/disabled RAID 6 support for 440SP/440SPe PPC's. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 77ddc5b9afb325262fd88752ba430a1dded1f0c7 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Jan 13 07:59:56 2007 +0100 |
| |
| [PATCH] Update Yellowstone (440GR) to display board rev and PCI bus speed |
| |
| Now the board revision and the current PCI bus speed are printed after |
| the board message. |
| |
| Also the EBC initialising is now done via defines in the board config |
| file. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 36adff362c2c0141ff8a810d42a7e478f779130f |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Jan 13 07:59:19 2007 +0100 |
| |
| [PATCH] Update Yosemite (440EP) to display board rev and PCI bus speed |
| |
| Now the board revision and the current PCI bus speed are printed after |
| the board message. |
| |
| Also the EBC initialising is now done via defines in the board config |
| file. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit e0b9ea8c8a294de6a5350ae638879d24b5b709d6 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Jan 13 07:57:51 2007 +0100 |
| |
| [PATCH] Update Sequoia (440EPx) to display board rev and PCI bus speed |
| |
| Now the board revision and the current PCI bus speed are printed after |
| the board message. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit ca43ba18e910206ef8063e4b22d282630bff3fd2 |
| Author: Heiko Schocher <hs@pollux.denx.de> |
| Date: Thu Jan 11 15:44:44 2007 +0100 |
| |
| Added support for the SOLIDCARD III board from Eurodesign |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit 6abaee42621c07e81a2cd189ad4368b5e8c50280 |
| Author: Reinhard Thies <Reinhard.Thies@web.de> |
| Date: Wed Jan 10 14:41:14 2007 +0100 |
| |
| Adjusted default environment for cam5200 board. |
| |
| commit bab5a90d4ccc1a46a8127b867fa59028cc623ad9 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Wed Jan 10 15:35:52 2007 +0100 |
| |
| Update CHANGELOG |
| |
| commit 787fa15860a57833e50bd30555079a9cd4e519b8 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Wed Jan 10 01:28:39 2007 +0100 |
| |
| Fix auto_update for MCC200 board. |
| |
| The invocation of do_auto_update() is moved to the end of the |
| misc_init_r() function, after the flash mappings have been |
| initialized. Please find attached a patch that implements that |
| change. |
| |
| Also correct the decoding of the keypad status. With this update, the |
| key that will trigger the update is Column 2, Row 2. |
| |
| commit d9384de2f571046e71081bae22b49e3d5ca2e3d5 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Wed Jan 10 00:26:15 2007 +0100 |
| |
| CAM5200 flash driver modifications: |
| - use CFI driver (replaces custom flash driver) for main 'cam5200' target |
| - add second build target 'cam5200_niosflash' which still uses custom driver |
| |
| commit 67fea022fa957f59653b5238c7496f80a6b70432 |
| Author: Markus Klotzbuecher <mk@denx.de> |
| Date: Tue Jan 9 16:02:48 2007 +0100 |
| |
| SPC1920: cleanup memory contoller setup |
| |
| commit 8fc2102faa23593c80381437c09f7745a14deb40 |
| Author: Markus Klotzbuecher <mk@denx.de> |
| Date: Tue Jan 9 14:57:14 2007 +0100 |
| |
| Fix the cpu speed setup to work with all boards. |
| |
| commit 9295acb77481cf099ef9b40e1fa2d145b3c7490c |
| Author: Markus Klotzbuecher <mk@denx.de> |
| Date: Tue Jan 9 14:57:13 2007 +0100 |
| |
| SPC1920: add support for the FM18L08 Ramtron FRAM |
| |
| commit 38ccd2fdf3364a53fe80e9b365303ecdafc9e223 |
| Author: Markus Klotzbuecher <mk@denx.de> |
| Date: Tue Jan 9 14:57:13 2007 +0100 |
| |
| SPC1920: update the HPI register addresses to work with the second |
| generation of hardware |
| |
| commit 5921e5313fc3eadd42770c2b99badd7fae5ecf1e |
| Author: Markus Klotzbuecher <mk@creamnet.de> |
| Date: Tue Jan 9 14:57:13 2007 +0100 |
| |
| Miscellanious spc1920 related cleanups |
| |
| commit e4c2d37adc8bb1bf69dcf600cbc6c75f916a6120 |
| Author: Markus Klotzbuecher <mk@denx.de> |
| Date: Tue Jan 9 14:57:12 2007 +0100 |
| |
| SPC1920 GO/NOGO led should be set to color red in U-Boot |
| |
| commit 0be62728aac459ba268d6d752ed49ec0e2bc7348 |
| Author: Markus Klotzbuecher <mk@creamnet.de> |
| Date: Tue Jan 9 14:57:12 2007 +0100 |
| |
| Add support for the DS3231 RTC |
| |
| commit 8139567b60d678584b05f0718a681f2047c5e14f |
| Author: Markus Klotzbuecher <mk@creamnet.de> |
| Date: Tue Jan 9 14:57:11 2007 +0100 |
| |
| SMC1 uses external CLK4 instead of BRG on spc1920 |
| |
| commit d8d9de1a02fbd880b613d607143d1f57342affc7 |
| Author: Markus Klotzbuecher <mk@creamnet.de> |
| Date: Tue Jan 9 14:57:10 2007 +0100 |
| |
| Update the SPC1920 CMB PLD driver |
| |
| commit 3f34f869162750e5e999fd140f884f5de952bcfe |
| Author: Markus Klotzbuecher <mk@creamnet.de> |
| Date: Tue Jan 9 14:57:10 2007 +0100 |
| |
| Add / enable I2C support on the spc1920 board |
| |
| commit d28707dbce1e9ac2017ad051da4133bf22b4204f |
| Author: Markus Klotzbuecher <mk@creamnet.de> |
| Date: Tue Jan 9 14:57:10 2007 +0100 |
| |
| Add support for the tms320671x host port interface (HPI) |
| |
| commit f4eb54529bb3664c3a562e488b460fe075f79d67 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Sun Jan 7 00:13:11 2007 +0100 |
| |
| Prepare for release 1.2.0 |
| |
| commit f07ae7a9daef27a3d0213a4f3fe39d5342173c02 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Jan 6 15:58:09 2007 +0100 |
| |
| [PATCH] 44x: Fix problem with DDR controller setup (refresh rate) |
| |
| This patch fixes a problem with an incorrect setup for the refresh |
| timer of the 44x DDR controller in the file cpu/ppc4xx/sdram.c |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit f16c1da9577f06c5fc08651a4065537407de4635 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Jan 6 15:56:13 2007 +0100 |
| |
| [PATCH] Update ALPR board files |
| |
| This update brings the ALPR board support to the newest version. |
| It also fixes a problem with the NAND driver. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit cd1d937f90250a32988c37b2b4af8364d25de8ed |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jan 5 11:46:05 2007 +0100 |
| |
| [PATCH] nand: Fix problem with oobsize calculation |
| |
| Here the description from Brian Brelsford <Brian_Brelsford@dell.com>: |
| |
| The Hynix part returns a 0x1d in the 4th ID byte. The Samsung part |
| returns a 0x15. In the code fragment below bits [1:0] determine the |
| page size, it is ANDed via "(extid & 0x3)" then shifted out. The |
| next field is also ANDed with 0x3. However this is a one bit field |
| as defined in the Hynix and Samsung parts in the 4th ID byte that |
| determins the oobsize, not a two bit field. It works on Samsung as |
| bits[3:2] are 01. However for the Hynix there is a 11 in these two |
| bits, so the oob size gets messed up. |
| |
| I checked the correct linux code and the suggested fix from Brian is |
| also available in the linux nand mtd driver. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit a78bc443ae5a4a8ba87590587d5e35bf5a787b2e |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jan 5 10:40:36 2007 +0100 |
| |
| [PATCH] Clear PLB4A0_ACR[WRP] on Sequoia (440EPx) |
| |
| This fix will make the MAL burst disabling patch for the Linux |
| EMAC driver obsolete. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 023889838282b6237b401664f22dd22dfba2c066 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jan 5 10:38:05 2007 +0100 |
| |
| [PATCH] Add DDR2 optimization code for Sequoia (440EPx) board |
| |
| This code will optimize the DDR2 controller setup on a board specific |
| basis. |
| |
| Note: This code doesn't work right now on the NAND booting image for the |
| Sequoia board, since it doesn't fit into the 4kBytes for the SPL image. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit cce4acbb68398634b8d011ed7bb0d12269c84230 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Thu Dec 28 19:08:21 2006 +0100 |
| |
| Few V38B changes: |
| - fix a typo in V38B config file |
| - move watchdog initialisation earlier in the boot process |
| - add "wdt=off" to default kernel command line (disables kernel watchdog) |
| |
| commit 92eb729bad876725aeea908d2addba0800620840 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Wed Dec 27 01:26:13 2006 +0100 |
| |
| Fix bug in adaption of Stefano Babic's CFI driver patch. |
| |
| commit 9c0f42ecfe25f7ffce8ec7a815f03864d723ffe3 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Sun Dec 24 01:42:57 2006 +0100 |
| |
| Minor code cleanup. |
| |
| commit d784fdb05900ada3686d5778783e1fb328e9fb66 |
| Author: Stefano Babic <sbabic@denx.de> |
| Date: Tue Dec 12 00:22:42 2006 +0100 |
| |
| Fix cfi failure with Spansion Flash (Spansion Flash Devices have a different offset to go into CFI mode) |
| |
| commit 1b3c360c235dc684ec06c2d5f183f0a282ce45e2 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Dec 22 14:29:40 2006 +0100 |
| |
| [PATCH] Fix sequoia flash autodetection (finally correct) |
| |
| Now 32MByte and 64MByte FLASH is know to work and other |
| configurations should work too. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 82e5236a8b719543643fd26d5827938ab2b94818 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Fri Dec 22 10:30:26 2006 +0100 |
| |
| Minor code cleanup; update CHANGELOG. |
| |
| commit fa23044564091f05d9695beb7b5b9a931e7f41a4 |
| Author: Heiko Schocher <hs@pollux.denx.de> |
| Date: Thu Dec 21 17:17:02 2006 +0100 |
| |
| Added support for the TQM8272 board from TQ |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit 6dedf3d49dd14c3bf541c8ecee7ffaac5f0e1d6c |
| Author: Heiko Schocher <hs@pollux.denx.de> |
| Date: Thu Dec 21 16:14:48 2006 +0100 |
| |
| [PATCH] Add support for the UC101 board from MAN. |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit c84bad0ef60e7055ab0bd49b93069509cecc382a |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Wed Dec 20 00:29:43 2006 +0100 |
| |
| Fix to make the baudrate changes immediate for the MCF52x2 family. |
| |
| commit daa6e418bcc0c717752e8de939c213c790286096 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Wed Dec 20 00:27:32 2006 +0100 |
| |
| Preliminary support for the iDMR board (ColdFire). |
| |
| commit cdb97a6678826f85e7c69eae6a1c113d034c9b10 |
| Author: Andrei Safronov <safronov@pollux.denx.de> |
| Date: Fri Dec 8 16:23:08 2006 +0100 |
| |
| automatic update mechanism |
| |
| commit 9d27b3a0685ff99fc477983f315c04d49f657a8a |
| Author: roy zang <tie-fei.zang@freescale.com> |
| Date: Mon Dec 4 17:56:59 2006 +0800 |
| |
| Slight code clean up. |
| Add comments, delete duplicate define and remove spaces. |
| Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| |
| commit 4dbcd69e3e2776ea334590d5768e3692c5fae5c1 |
| Author: roy zang <tie-fei.zang@freescale.com> |
| Date: Mon Dec 4 17:54:21 2006 +0800 |
| |
| Introduce PLL_CFG[0:4] table for processor 7448/7447A/7455/7457. The original |
| multiplier table can not refect the real PLL clock behavior of these |
| processors. Please refer to the hardware specification for detailed |
| information of the corresponding processors. |
| Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| |
| commit 4efe20c9579011d9987f62ed7d35ee8cdc1cf0e0 |
| Author: roy zang <tie-fei.zang@freescale.com> |
| Date: Mon Dec 4 14:46:23 2006 +0800 |
| |
| Remove the static MAC address, ip address, server ip, netmask and |
| gateway ip for network setting. |
| Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| |
| commit 6f12c61cf31ed73d72ddfcfc712a854a3a177aaf |
| Author: roy zang <tie-fei.zang@freescale.com> |
| Date: Mon Dec 4 14:33:08 2006 +0800 |
| |
| Remove the duplicate memory test code for mpc744ihpc2 board. |
| If a memory test is needed, please use the functions in |
| post/memory.c or memtest command. |
| Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| |
| commit c9c1eeed7dd193fa65fb194654132040d49d4d3a |
| Author: roy zang <tie-fei.zang@freescale.com> |
| Date: Fri Dec 1 19:01:25 2006 +0800 |
| |
| Fix the exception occuring in RAM table search issue. |
| The original search_one_table() function code can only processes the search |
| for the exception occurring in FLASH/ROM, because the exception and fixup |
| table usually locate in FLASH. If the exception address is also in |
| FLASH, it will be OK. |
| If the exception occurs in RAM, after the u-boot relocation, a |
| relocation offset should be added. |
| |
| clean up the code in cpu/74xx_7xx/cpu.c |
| |
| Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| |
| commit ee311214e0d216f904feea269599d0934bf71f23 |
| Author: roy zang <tie-fei.zang@freescale.com> |
| Date: Fri Dec 1 11:47:36 2006 +0800 |
| |
| Clean up the code according to codestyle: |
| (1) remove some C++ comments. |
| (2) remove trailing white space. |
| (3) remove trailing empty line. |
| (4) Indentation by table. |
| (5) remove {} in one line condition. |
| (6) add space before '(' in function call. |
| Remove some weird printf () output. |
| Add necessary comments. |
| Modified Makefile to support building in a separate directory. |
| |
| commit dd520bf314c7add4183c5191692180f576f96b60 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Thu Nov 30 18:02:20 2006 +0100 |
| |
| Code cleanup. |
| |
| commit 8d9a8610b8256331132227e9e6585c6bd5742787 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Thu Nov 30 01:54:07 2006 +0100 |
| |
| Code cleanup. Update CHANGELOG. |
| |
| commit 726e90aacf0b1ecb0e7055be574622fbe3e450ba |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Wed Nov 29 16:23:42 2006 +0100 |
| |
| [PATCH] [MPC52xx] Use IPB bus frequency for SOC peripherals |
| |
| The soc node of the mpc52xx needs to be loaded with the IPB bus frequency, |
| not the XLB frequency. |
| |
| This patch depends on the previous patches for MPC52xx device tree support |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| Signed-off-by: Sylvain Munaut <tnt@246tNt.com> |
| |
| commit 1eac2a71417b6675b11aace72102a2e7fde8f5c6 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Nov 29 15:42:37 2006 +0100 |
| |
| [PATCH] Add support for Prodrive P3M750 & P3M7448 (P3Mx) boards |
| |
| This patch adds support for the Prodrive P3M750 (PPC750 & MV64460) |
| and the P3M7448 (MPC7448 & MV64460) PMC modules. Both modules are |
| quite similar and share the same board directory "prodrive/p3mx" |
| and the same config file "p3mx.h". |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 1bdd46832aeb569f5e04b1f20f64318525b6525a |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Nov 29 12:53:15 2006 +0100 |
| |
| [PATCH] common/cmd_elf.c: Enable loadaddr as parameter in bootvx command |
| |
| In the bootvx command the load address was only read from the env |
| variable "loadaddr" and not optionally passed as paramter as described |
| in the help. This is fixed with this patch. The behaviour is now the |
| same as in the bootelf command. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 4e26f1074c3ac1bd8fd094f0dc4a1c4a0b15a592 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Nov 29 12:03:57 2006 +0100 |
| |
| [PATCH] include/ppc440.h minor error affecting interrupts |
| |
| Fixed include/ppc440.c for UIC address Bug |
| |
| Corrects bug affecting the addresses for the universal interrupt |
| controller UIC2 and UIC3 on the PPC440 Epx, GRx, and SPE chips. |
| |
| Signed-off-by: Jeff Mann <mannj@embeddedplanet.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 1939d969443ccf316cab2bf32ab1027d4db5ba1a |
| Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> |
| Date: Tue Nov 28 16:17:27 2006 -0600 |
| |
| Make fsl-i2c not conflict with SOFT I2C |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| |
| commit 14198bf768fdc958e3c1afd2404e5262208e98d7 |
| Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> |
| Date: Tue Nov 28 16:17:18 2006 -0600 |
| |
| Fix I2C master address initialization. |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| |
| commit cf3d045e51ca8dcc6cf759827140861d6ac25c04 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Tue Nov 28 23:31:19 2006 -0600 |
| |
| Assign maintainers for mpc8349emds and mpc8360emds |
| |
| Dave for mpc8360emds, and me for mpc8349emds. |
| |
| commit 1aa934c81b77f2080d3ca4b226eab67b17a33961 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Tue Nov 28 23:28:33 2006 -0600 |
| |
| Eliminate gcc 4 'used uninitialized' warnings in drivers/qe/uccf.c |
| |
| give initial values for reg_num, shift, p_cmxucr in ucc_set_clk_src |
| since they are passed by reference to ucc_get_cmxucr_reg and assigned. |
| |
| commit e857a5bdb3954b896c0920cb9d8d2b1b9c107ce5 |
| Author: Timur Tabi <timur@freescale.com> |
| Date: Tue Nov 28 12:09:35 2006 -0600 |
| |
| mpc83xx: Miscellaneous code style fixes |
| |
| Implement various code style fixes and similar changes. |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| |
| commit e59581c56ab5d6e0207ddac3b2c1d55cb36ec706 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Nov 28 17:55:49 2006 +0100 |
| |
| [PATCH] Enable the IceCube/lite5200 variants to pass a device tree to Linux. |
| |
| This patch adds the code and configuration necessary to boot with an |
| arch/powerpc Linux kernel. |
| |
| Signed-off-by: Grant Likely <grant.likely@gmail.com> |
| Acked-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit e732faec95a83cb468b4850ae807c8301dde8f6a |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Nov 28 16:09:24 2006 +0100 |
| |
| [PATCH] PPC4xx: 440SP Rev. C detection added |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit e7f3e9ff01fbd7fa72eb42a9675fbed6bc4736b0 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Nov 28 11:04:45 2006 +0100 |
| |
| [PATCH] nand: Fix patch merge problem |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 58e3b14c18ed3288ceef8d086946dbf3df64ccf2 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Nov 28 11:04:45 2006 +0100 |
| |
| [PATCH] nand: Fix patch merge problem |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 4f4b602ec7524a032bdf3c6d28c7f525a4a67eaa |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Mon Nov 27 22:53:53 2006 +0100 |
| |
| Update CHANGELOG |
| |
| commit f6e495f54cdb8fe340b9c03deab40ad746d52fae |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Nov 27 17:43:25 2006 +0100 |
| |
| [PATCH] 4xx_enet.c: Correct the setting of zmiifer register |
| |
| Patch below corrects the setting of the zmiifer register, it was |
| overwritting the register rather than ORing the settings. |
| |
| Signed-off-by: Neil Wilson <NWilson@airspan.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit d1a72545296800b7e219f93104ad5836f0003d66 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Nov 27 17:34:10 2006 +0100 |
| |
| [PATCH] Select NAND embedded environment from board configuration |
| |
| The current NAND Bootloader setup forces the environment |
| variables to be in line with the bootloader. This change |
| enables the configuration to be made in the board include |
| file instead so that it can be individually enabled. |
| |
| Signed-off-by: Nick Spence <nick.spence@freescale.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 15784862857c3c2214498defcfed84ff137fb81e |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Nov 27 17:22:19 2006 +0100 |
| |
| [PATCH] nand_wait() timeout fixes |
| |
| Two fixes for the nand_wait() function in |
| drivers/nand/nand_base.c: |
| |
| 1. Use correct timeouts. The original timeouts in Linux |
| source are 400ms and 20ms not 40s and 20s |
| |
| 2. Return correct error value in case of timeout. 0 is |
| interpreted as OK. |
| |
| Signed-off-by: Rui Sousa <rui.sousa@laposte.net> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit da5553b095bf04f4f109ad7e565dae3aba47b230 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Nov 27 17:04:06 2006 +0100 |
| |
| [PATCH] Allow CONFIG_OF_FLAT_TREE to boot a non-arch/powerpc kernel |
| |
| This patch allows an arch/ppc kernel to be booted by just passing 1 or 2 |
| arguments to bootm. It removes the getenv("disable_of") test that used |
| to be used for this purpose. |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| Acked-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit a9398e018593782c5fa7d0741955fc1256b34c1e |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Mon Nov 27 15:32:42 2006 +0100 |
| |
| Minor code cleanup. Update CHANGELOG. |
| |
| commit 1729b92cde575476684bffe819d0b7791b57bff2 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Nov 27 14:52:04 2006 +0100 |
| |
| [PATCH] 4xx: Fix problem with board specific reset code (now for real) |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit cc5ee8a92a0e3ca6f727af71b8fd206460c7afd7 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Nov 27 14:49:51 2006 +0100 |
| |
| [PATCH] alpr: remove unused board specific flash driver |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 1f94d162e2b5f0edc28d9fb11482502c44d218e1 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Nov 27 14:48:41 2006 +0100 |
| |
| [PATCH] 4xx: Fix problem with board specific reset code |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit ec0c2ec725aec9524a177a77ce75559e644a931a |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Nov 27 14:46:06 2006 +0100 |
| |
| [PATCH] Remove testing 4xx enet PHY setup |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 1c2ce2262069510f31c7d3fd7efd3d58b8c0c148 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Nov 27 14:12:17 2006 +0100 |
| |
| [PATCH] Update Prodrive ALPR board support (440GX) |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 58b485776698c3d71ec5a215e392123b4c15afa3 |
| Author: Markus Klotzbuecher <mk@denx.de> |
| Date: Mon Nov 27 11:51:21 2006 +0100 |
| |
| Add a small README with information on the generic ohci driver. |
| |
| commit ae3b770e4eae8e98b6e9e29662e18c47fdf0171f |
| Author: Markus Klotzbuecher <mk@denx.de> |
| Date: Mon Nov 27 11:46:46 2006 +0100 |
| |
| Fix some endianness issues related to the generic ohci driver |
| |
| commit 7b59b3c7a8ce2e4b567abf99c1cd667bf35b9418 |
| Author: Markus Klotzbuecher <mk@denx.de> |
| Date: Mon Nov 27 11:44:58 2006 +0100 |
| |
| Introduced the configuration option CONFIG_USB_OHCI_NEW in order to be able |
| to choose between the old and the generic OHCI drivers. |
| |
| commit 53e336e9ffc51035bdc4e5867631b3378761b4df |
| Author: Markus Klotzbuecher <mk@denx.de> |
| Date: Mon Nov 27 11:43:09 2006 +0100 |
| |
| Modified the mpc5xxx and the ppc4xx cpu to use the generic OHCI driver |
| and adapted board configs TQM5200 and yosemite accordingly. This commit |
| also makes the maximum number of root hub ports configurable |
| (CFG_USB_OHCI_MAX_ROOT_PORTS). |
| |
| commit 78d620ebb5871d252270dedfad60c6568993b780 |
| Author: Wolfgang Denk <wd@atlas.denx.de> |
| Date: Thu Nov 23 22:58:58 2006 +0100 |
| |
| Updates for TQM5200 modules: |
| - fix off-by-one error in board/tqm5200/cam5200_flash.c error message |
| - simplify "udate" definitions |
| |
| commit 2053283304eeddf250d109e6791eb6fa4cad14f7 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Nov 22 13:20:50 2006 +0100 |
| |
| [PATCH] PPC4xx start.S: Fix for processor errata |
| |
| Fixed cpu/ppc4xx/start.S for 440EPx Errata: further corrects PPC440EPx |
| errata 1.12: 440_33 by moving patch up in code. |
| |
| Signed-off-by: Jeff Mann <mannj@embeddedplanet.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 4ef6251403f637841000e0fef9e832aa01339822 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Nov 20 20:39:52 2006 +0100 |
| |
| [PATCH] Update AMCC Sequoia config file to support 64MByte NOR FLASH |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit e4bbd8da164b976d38616bd9c69c5e86e193cdf0 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Mon Nov 20 10:28:30 2006 +0100 |
| |
| Update CHANGELOG |
| |
| commit 260421a21e934a68d31fb6125b0fbd2631a8ca20 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Nov 13 13:55:24 2006 +0100 |
| |
| [PATCH] CFI driver AMD Command Set Top boot geometry reversal, etc. [Updated] |
| |
| * Adds support for AMD command set Top Boot flash geometry reversal |
| * Adds support for reading JEDEC Manufacturer ID and Device ID |
| * Adds support for displaying command set, manufacturer id and |
| device ids (flinfo) |
| * Makes flinfo output to be consistent when CFG_FLASH_EMPTY_INFO defined |
| * Removes outdated change history (refer to git log instead) |
| |
| Signed-off-by: Tolunay Orkun <listmember@orkun.us> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit b21b511d4c50408f4853f46f06b601272196223f |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Sun Nov 12 21:13:23 2006 +0100 |
| |
| Update CHANGELOG |
| |
| commit ce3f1a40c507afbab06c5eb58ccdc6713eda3245 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Sat Nov 11 22:48:22 2006 +0100 |
| |
| Disable the watchdog in the default config for the V38B board. |
| |
| commit 44a47e6db2694841211f1c8fdbafd36992e9cd1a |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Sat Nov 11 22:43:00 2006 +0100 |
| |
| Change the GPIO pin multiplexing configuration for V38B. The USB GPIO pin |
| group is enabled for USB earlier (in cpu_init_f() instead of |
| usb_lowlevel_init()). |
| |
| commit 91650b3e4de688038d4f71279c44858e3e2c6870 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Mon Nov 6 17:06:36 2006 +0100 |
| |
| Sequential accesses to non-existent memory must be synchronized, |
| at least on G2 cores. |
| |
| This fixes get_ram_size() problems on MPC5200 Rev. B boards. |
| |
| commit be5e61815d5a1fac290ce9c0ef09cb6a8e4288fa |
| Author: Timur Tabi <timur@freescale.com> |
| Date: Fri Nov 3 19:15:00 2006 -0600 |
| |
| mpc83xx: Update 83xx to use fsl_i2c.c |
| |
| Update the 83xx tree to use I2C support in drivers/fsl_i2c.c. Delete |
| cpu/mpc83xx/i2c.c, include/asm-ppc/i2c.h, and all references to those files. |
| Added multiple I2C bus support to fsl_i2c.c. |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| |
| commit d239d74b1c937984bc519083a8e7de373a390f06 |
| Author: Timur Tabi <timur@freescale.com> |
| Date: Fri Nov 3 12:00:28 2006 -0600 |
| |
| mpc83xx: Replace CFG_IMMRBAR with CFG_IMMR |
| |
| Replace all instances of CFG_IMMRBAR with CFG_IMMR, so that the 83xx |
| tree matches the other 8xxx trees. |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| |
| commit f7fb2e703ec9688541416962724adff70a7322cb |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Thu Nov 2 19:47:11 2006 -0600 |
| |
| mpc83xx: Lindent and clean up cpu/mpc83xx/speed.c |
| |
| commit 90f30a710a3c619b5405860a686c4ddfc495d4b6 |
| Author: Dave Liu <daveliu@freescale.com> |
| Date: Thu Nov 2 18:05:50 2006 -0600 |
| |
| mpc83xx: Fix the incorrect dcbz operation |
| |
| The 834x rev1.x silicon has one CPU5 errata. |
| |
| The issue is when the data cache locked with |
| HID0[DLOCK], the dcbz instruction looks like no-op inst. |
| |
| The right behavior of the data cache is when the data cache |
| Locked with HID0[DLOCK], the dcbz instruction allocates |
| new tags in cache. |
| |
| The 834x rev3.0 and later and 8360 have not this bug inside. |
| |
| So, when 834x rev3.0/8360 are working with ECC, the dcbz |
| instruction will corrupt the stack in cache, the processor will |
| checkstop reset. |
| |
| However, the 834x rev1.x can work with ECC with these code, |
| because the sillicon has this cache bug. The dcbz will not |
| corrupt the stack in cache. |
| Really, it is the fault code running on fault sillicon. |
| |
| This patch fix the incorrect dcbz operation. Instead of |
| CPU FP writing to initialise the ECC. |
| |
| CHANGELOG: |
| * Fix the incorrect dcbz operation instead of CPU FP |
| writing to initialise the ECC memory. Otherwise, it |
| will corrupt the stack in cache, The processor will checkstop |
| reset. |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| |
| commit bf0b542d6773a5a1cbce77691f009b06d9aeb57d |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Wed Nov 1 00:10:40 2006 -0600 |
| |
| mpc83xx: add OF_FLAT_TREE bits to 83xx boards |
| |
| add ft_pci_setup, OF_CPU, OF_SOC, OF_TBCLK, and |
| STDOUT_PATH configuration bits to mpc8349emds, |
| mpc8349itx, and mpc8360emds board code. |
| |
| redo environment to use bootm with the fdtaddr |
| for booting ARCH=powerpc kernels by default, |
| and provide default fdtaddr values. |
| |
| commit 48041365b3420589ad464ebc7752e0053538b729 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Wed Nov 1 00:07:25 2006 -0600 |
| |
| mpc83xx: change ft code to modify local-mac-address property |
| |
| Update 83xx OF code to update local-mac-address properties |
| for ethernet instead of the obsolete 'address' property. |
| |
| commit 9ca880a250870a7d55754291b5591d2b5fe89b54 |
| Author: Timur Tabi <timur@freescale.com> |
| Date: Tue Oct 31 21:23:16 2006 -0600 |
| |
| mpc83xx: Fix dual I2C support for the MPC8349ITX, MPC8349EMDS, TQM834x, and MPC8360EMDS |
| |
| This patch also adds an improved I2C set_speed(), which handles all clock |
| frequencies. |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| |
| commit ac4b5622ce050b5ee1e154b98df630d778661632 |
| Author: Dave Liu <daveliu@freescale.com> |
| Date: Tue Oct 31 19:54:59 2006 -0600 |
| |
| mpc83xx: add the README.mpc8360emds |
| |
| add doc/README.mpc8360emds to accompany the new board support |
| |
| commit 7737d5c658c606f999dfbe3e86b0fed49e5c50ef |
| Author: Dave Liu <daveliu@freescale.com> |
| Date: Fri Nov 3 12:11:15 2006 -0600 |
| |
| mpc83xx: add QE ethernet support |
| |
| this patch adds support for the QUICC Engine based UCC gigabit ethernet device. |
| |
| commit 5f8204394e39bbe8cd9f08b8f8d145b6c01f7c73 |
| Author: Dave Liu <daveliu@freescale.com> |
| Date: Fri Nov 3 19:33:44 2006 -0600 |
| |
| mpc83xx: Add MPC8360EMDS basic board support |
| |
| Add support for the Freescale MPC8360EMDS board. |
| Includes DDR, DUART, Local Bus, PCI. |
| |
| commit 23892e49352de74f7fac36ff90bb1be143d195e3 |
| Author: Dave Liu <daveliu@freescale.com> |
| Date: Tue Oct 31 19:30:40 2006 -0600 |
| |
| mpc83xx: add the QUICC Engine (QE) immap file |
| |
| common QE immap file. Also required for 8360. |
| |
| commit b701652a4992bdcc62fb1a6038a85beef9e55da4 |
| Author: Dave Liu <daveliu@freescale.com> |
| Date: Tue Oct 31 19:25:38 2006 -0600 |
| |
| mpc83xx: Add 8360 specifics to 83xx immap |
| |
| Mainly add QE device dependencies, with appropriate 8360 protection. |
| Lindent also run. |
| |
| commit 988833324a7fda482c8ac3ca23eb539f8232e404 |
| Author: Timur Tabi <timur@freescale.com> |
| Date: Tue Oct 31 19:14:41 2006 -0600 |
| |
| mpc83xx: Fix PCI, USB, bootargs for MPC8349E-mITX |
| |
| PREREQUISITE PATCHES: |
| |
| * This patch can only be applied after the following patches have been applied: |
| |
| 1) DNX#2006092142000015 "Add support for the MPC8349E-mITX 1/2" |
| 2) DNX#2006092142000024 "Add support for the MPC8349E-mITX 2/2" |
| |
| CHANGELOG: |
| |
| * For the 8349E-mITX, fix some size values in pci_init_board(), enable |
| the clock for the 2nd USB board (Linux kernel will hang otherwise), |
| and fix the CONFIG_BOOTARGS macro. |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| |
| commit 2ad6b513b31070bd0c003792ed1c3e7f5d740357 |
| Author: Timur Tabi <timur@freescale.com> |
| Date: Tue Oct 31 18:44:42 2006 -0600 |
| |
| mpc83xx: Add support for the MPC8349E-mITX |
| |
| PREREQUISITE PATCHES: |
| |
| * This patch can only be applied after the following patches have been applied: |
| |
| 1) DNX#2006090742000024 "Add support for multiple I2C buses" |
| 2) DNX#2006090742000033 "Multi-bus I2C implementation of MPC834x" |
| 3) DNX#2006091242000041 "Additional MPC8349 support for multibus i2c" |
| 4) DNX#2006091242000078 "Add support for variable flash memory sizes on 83xx systems" |
| 5) DNX#2006091242000069 "Add support for Errata DDR6 on MPC 834x systems" |
| |
| CHANGELOG: |
| |
| * Add support for the Freescale MPC8349E-mITX reference design platform. |
| The second TSEC (Vitesse 7385 switch) is not supported at this time. |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| |
| commit 183da6d9b446cc12123455844ad1187e2375626f |
| Author: Ben Warren <bwarren@qstreams.com> |
| Date: Tue Sep 12 10:15:53 2006 -0400 |
| |
| Additional MPC8349 support for multibus i2c |
| |
| Hello, |
| |
| Here is a patch for a file that was accidentally left out of a previous |
| attempt. |
| |
| It accompanies the patch with ticket DNX#2006090742000024 |
| |
| CHANGELOG: |
| Change PCI initialization to use new multi-bus I2C API. |
| |
| regards, |
| Ben |
| |
| commit b24f119d672b709d153ff2ac091d4aa63ec6877d |
| Author: Ben Warren <bwarren@qstreams.com> |
| Date: Thu Sep 7 16:51:04 2006 -0400 |
| |
| Multi-bus I2C implementation of MPC834x |
| |
| Hello, |
| |
| Attached is a patch implementing multiple I2C buses on the MPC834x CPU |
| family and the MPC8349EMDS board in particular. |
| This patch requires Patch 1 (Add support for multiple I2C buses). |
| Testing was performed on a 533MHz board. |
| |
| /*** Note: This patch replaces ticket DNX#2006083042000027 ***/ |
| |
| Signed-off-by: Ben Warren <bwarren@qstreams.com> |
| |
| CHANGELOG: |
| Implemented driver-level code to support two I2C buses on the |
| MPC834x CPU family and the MPC8349EMDS board. Available I2C bus speeds |
| are 50kHz, 100kHz and 400kHz on each bus. |
| |
| regards, |
| Ben |
| |
| commit bb99ad6d8257bf828f150d40f507b30d80a4a7ae |
| Author: Ben Warren <bwarren@qstreams.com> |
| Date: Thu Sep 7 16:50:54 2006 -0400 |
| |
| Add support for multiple I2C buses |
| |
| Hello, |
| |
| Attached is a patch providing support for multiple I2C buses at the |
| command level. The second part of the patch includes an implementation |
| for the MPC834x CPU and MPC8349EMDS board. |
| |
| /*** Note: This patch replaces ticket DNX#2006083042000018 ***/ |
| |
| Signed-off-by: Ben Warren <bwarren@qstreams.com> |
| |
| Overview: |
| |
| 1. Include new 'i2c' command (based on USB implementation) using |
| CONFIG_I2C_CMD_TREE. |
| |
| 2. Allow multiple buses by defining CONFIG_I2C_MULTI_BUS. Note that |
| the commands to change bus number and speed are only available under the |
| new 'i2c' command mentioned in the first bullet. |
| |
| 3. The option CFG_I2C_NOPROBES has been expanded to work in multi-bus |
| systems. When CONFIG_I2C_MULTI_BUS is used, this option takes the form |
| of an array of bus-device pairs. Otherwise, it is an array of uchar. |
| |
| CHANGELOG: |
| Added new 'i2c' master command for all I2C interaction. This is |
| conditionally compiled with CONFIG_I2C_CMD_TREE. New commands added for |
| setting I2C bus speed as well as changing the active bus if the board |
| has more than one (conditionally compiled with |
| CONFIG_I2C_MULTI_BUS). Updated NOPROBE logic to handle multiple buses. |
| Updated README. |
| |
| regards, |
| Ben |
| |
| commit bed85caf872714ebf53013967a695c9d63acfc68 |
| Author: Timur Tabi <timur@freescale.com> |
| Date: Tue Oct 31 18:13:36 2006 -0600 |
| |
| mpc83xx: Add support for Errata DDR6 on MPC 834x systems |
| |
| CHANGELOG: |
| |
| * Errata DDR6, which affects all current MPC 834x processors, lists changes |
| required to maintain compatibility with various types of DDR memory. This |
| patch implements those changes. |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| |
| commit afd6e470f639883002c7c59d562690a5cb0f4865 |
| Author: Timur Tabi <timur@freescale.com> |
| Date: Wed Oct 25 18:45:23 2006 -0500 |
| |
| mpc83xx: fix TQM build by defining a CFG_FLASH_SIZE for it |
| |
| commit 31068b7c4abeefcb2c8fd4fbeccc8ec6c6d0475a |
| Author: Timur Tabi <timur@freescale.com> |
| Date: Tue Aug 22 17:07:00 2006 -0500 |
| |
| mpc83xx: Add support for variable flash memory sizes on 83xx systems |
| |
| CHANGELOG: |
| |
| * On 83xx systems, use the CFG_FLASH_SIZE macro to program the LBC local access |
| window registers, instead of using a hard-coded value of 8MB. |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| |
| commit 2fc34ae66e73fa7841d1a006dc1b5dcbc1f78965 |
| Author: Tanya Jiang <tanya.jiang@freescale.com> |
| Date: Thu Aug 3 18:38:13 2006 +0800 |
| |
| mpc83xx: Unified TQM834x variable names with 83xx and consolidated macros |
| |
| Unified TQM834x variable names with 83xx and consolidated macro |
| in preparation for the 8360 and other upcoming 83xx devices. |
| |
| Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com> |
| |
| commit f6eda7f80ccc13d658020268c507d7173cf2e8aa |
| Author: Dave Liu <daveliu@freescale.com> |
| Date: Wed Oct 25 14:41:21 2006 -0500 |
| |
| mpc83xx: Changed to unified mpx83xx names and added common 83xx changes |
| |
| Incorporated the common unified variable names and the changes in preparation |
| for releasing mpc8360 patches. |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| |
| commit 3894c46c27c64891f93ac04edde86a9fa9758d92 |
| Author: Tanya Jiang <tanya.jiang@freescale.com> |
| Date: Thu Aug 3 18:36:02 2006 +0800 |
| |
| mpc83xx: Fix missing build for mpc8349emds pci.c |
| |
| Make pci build for mpc8349emds |
| |
| Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com> |
| |
| commit 09a81ff740b29deea1e2ab08a3c2ac136c2e6219 |
| Author: Tanya Jiang <tanya.jiang@freescale.com> |
| Date: Thu Aug 3 18:39:49 2006 +0800 |
| |
| mpc83xx: Removed unused file resetvec.S for mpc83xx cpu |
| |
| Removed unused file resetvec.S for mpc83xx cpu |
| |
| Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com> |
| |
| commit 04f899fc465c3e44f2b55ecc70618f5696fc0ddf |
| Author: Nick Spence <Nick.Spence@freescale.com> |
| Date: Sat Sep 30 00:32:59 2006 -0700 |
| |
| NAND Flash verify across block boundaries |
| |
| This patch addresses a problem when CONFIG_MTD_NAND_VERIFY_WRITE is |
| defined |
| and the write crosses a block boundary. The pointer to the verification |
| buffer (bufstart) is not being updated to reflect the starting of the |
| new |
| block so the verification of the second block fails. |
| |
| CHANGELOG: |
| |
| * Fix NAND FLASH page verification across block boundaries |
| |
| commit f484dc791a3932537213c43c654cc1295c64b84c |
| Author: Nick Spence <nick.spence@freescale.com> |
| Date: Thu Sep 7 07:39:46 2006 -0700 |
| |
| Added RGMII support to the TSECs and Marvell 881111 Phy |
| |
| Added a phy initialization to adjust the RGMII RX and TX timing |
| Always set the R100 bit in 100 BaseT mode regardless of the TSEC mode |
| |
| Signed-off-by: Nick Spence <nick.spence@freescale.com> |
| |
| commit 4831c8b8a97799da77923d6bbb4c260c0d45521c |
| Author: roy zang <tie-fei.zang@freescale.com> |
| Date: Fri Nov 3 13:10:00 2006 +0800 |
| |
| Remove some unused CFG define. |
| undef CFG_DRAM_TEST |
| |
| commit 99c09c4dec34f77c243bf51bea532e3f339410ad |
| Author: roy zang <tie-fei.zang@freescale.com> |
| Date: Fri Nov 3 13:07:36 2006 +0800 |
| |
| Change the TEXT_BASE from 0xFFF00000 to 0xFF000000. |
| Both work. 0xFF000000 seems more reasonable. |
| |
| commit c59200443072353044aa4bf737a5a60f9a9af231 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Thu Nov 2 15:15:01 2006 +0100 |
| |
| Release U-Boot 1.1.6 |
| |
| commit c1fbe4103a0d6c8957f912af902d705ba67836f2 |
| Author: roy zang <tie-fei.zang@freescale.com> |
| Date: Thu Nov 2 19:14:48 2006 +0800 |
| |
| This patch comes from Yuli's posted patch on 8/8/2006 |
| titled "CFI Driver Little-Endian write Issue". |
| |
| http://sourceforge.net/mailarchive/message.php?msg_id=36311999 |
| |
| If that patch applied, please discard this one. |
| Until now , I do not see his patch is applied. So please apply this one. |
| |
| Signed-off-by: Yuli Barcohen <yuli@arabellasw.com> |
| Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| |
| commit b825f158e449e1e9cf74c08e572955e122394c96 |
| Author: roy zang <tie-fei.zang@freescale.com> |
| Date: Thu Nov 2 19:12:31 2006 +0800 |
| |
| Tsi108 on chip i2c support. |
| |
| The i2c Interface provides a master-only, serial interface that can be |
| used for initializing Tsi108/Tsi109 registers from an EEPROM after a |
| device reset. |
| |
| Signed-off-by: Alexandre Bounine <alexandreb@tundra.com> |
| Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| |
| commit 9226e7d6f09b9a1ac074cd918c81225a4689bba8 |
| Author: roy zang <tie-fei.zang@freescale.com> |
| Date: Thu Nov 2 19:11:06 2006 +0800 |
| |
| Tsi108 on chip pci controller support. |
| |
| If there is no pci card, the tsi108/109 pci configure read will |
| cause a machine check exception to the processor. PCI error should |
| also be cleared after the read. |
| |
| Signed-off-by: Alexandre Bounine <alexandreb@tundra.com> |
| Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| |
| commit d1927cee977126e547ceeba23e4f978f377cfb8f |
| Author: roy zang <tie-fei.zang@freescale.com> |
| Date: Thu Nov 2 19:08:55 2006 +0800 |
| |
| Tundra tsi108 on chip Ethernet controller support. |
| |
| The following is a brief description of the Ethernet controller: |
| The Tsi108/9 Ethernet Controller connects Switch Fabric to two independent |
| Gigabit Ethernet ports,E0 and E1. It uses a single Management interface |
| to manage the two physical connection devices (PHYs). Each Ethernet port |
| has its own statistics monitor that tracks and reports key interface |
| statistics. Each port supports a 256-entry hash table for address |
| filtering. In addition, each port is bridged to the Switch Fabric |
| through a 2-Kbyte transmit FIFO and a 4-Kbyte Receive FIFO. |
| |
| Each Ethernet port also has a pair of internal Ethernet DMA channels to |
| support the transmit and receive data flows. The Ethernet DMA channels |
| use descriptors set up in memory, the memory map of the device, and |
| access via the Switch Fabric. The Ethernet Controller?s DMA arbiter |
| handles arbitration for the Switch Fabric. The Controller also |
| has a register businterface for register accesses and status monitor |
| control. |
| |
| The PMD (Physical Media Device) interface operates in MII, GMII, or TBI |
| modes. The MII mode is used for connecting with 10 or 100 Mbit/s PMDs. |
| The GMII and TBI modes are used to connect with Gigabit PMDs. Internal |
| data flows to and from the Ethernet Controller through the Switch Fabric. |
| |
| Each Ethernet port uses its transmit and receive DMA channels to manage |
| data flows through buffer descriptors that are predefined by the |
| system (the descriptors can exist anywhere in the system memory map). |
| These descriptors are data structures that point to buffers filled |
| with data ready to transmit over Ethernet, or they point to empty |
| buffers ready to receive data from Ethernet. |
| |
| Signed-off-by: Alexandre Bounine <alexandreb@tundra.com> |
| Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| |
| commit 78aa0c3427f3ecdeb34aabfbbe2dd23b6ad8f40e |
| Author: roy zang <tie-fei.zang@freescale.com> |
| Date: Thu Nov 2 19:01:33 2006 +0800 |
| |
| Tundra tsi108 header file. |
| |
| The Tundra Semiconductor Corporation (Tundra) Tsi108 is a host bridge for |
| PowerPC processors that offers numerous system interconnect options for |
| embedded application designers. The Tsi108 can interconnect 60x or |
| MPX processors to PCI/X peripherals, DDR2-400 memory, Gigabit Ethernet, |
| and Flash. Provided the macro define for tsi108 chip. |
| |
| Signed-off-by: Alexandre Bounine <alexandreb@tundra.com> |
| Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| |
| commit 87c4db09699c6b89176b31004afcb83eb1585d47 |
| Author: roy zang <tie-fei.zang@freescale.com> |
| Date: Thu Nov 2 18:59:15 2006 +0800 |
| |
| Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support. |
| mpc7448hpc2 board support high level code:tsi108 init + mpc7448hpc2. |
| |
| Signed-off-by: Alexandre Bounine <alexandreb@tundra.com> |
| Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| |
| commit 27801b8ab11c61b577e45742a515bb3b23b80241 |
| Author: roy zang <tie-fei.zang@freescale.com> |
| Date: Thu Nov 2 18:57:21 2006 +0800 |
| |
| Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support. |
| Make ,config.mk and link file for the mpc7448hpc2 board. |
| |
| Signed-off-by: Alexandre Bounine <alexandreb@tundra.com> |
| Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| |
| commit c6411c0c3bbc79f9ba8aef58296a42d8f9d8a0a6 |
| Author: roy zang <tie-fei.zang@freescale.com> |
| Date: Thu Nov 2 18:55:04 2006 +0800 |
| |
| Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support. |
| The mpc7448hpc2 board support header file. |
| |
| Signed-off-by: Alexandre Bounine <alexandreb@tundra.com> |
| Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| |
| commit 625bb5ddb50b243f931262ca8c46956409471917 |
| Author: roy zang <tie-fei.zang@freescale.com> |
| Date: Thu Nov 2 18:52:21 2006 +0800 |
| |
| Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support. |
| The mpc7448hpc2 board support low level assemble language init code. |
| |
| Signed-off-by: Alexandre Bounine <alexandreb@tundra.com> |
| Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| |
| commit 4c52783b3d024e153c4972b97332e314bc3bdc46 |
| Author: roy zang <tie-fei.zang@freescale.com> |
| Date: Thu Nov 2 18:49:51 2006 +0800 |
| |
| General code modification for mpc7448hpc2 board support. |
| 1. Add 7447A and 7448 processor support. |
| 2. Add the following flags. |
| |
| CFG_CONFIG_BUS_CLK : If the 74xx bus frequency can be configured dynamically |
| (such as by switch on board), this flag should be set. |
| |
| CFG_EXCEPTION_AFTER_RELOCATE: If an exception occurs after the u-boot |
| relocates to RAM, this flag should be set. |
| |
| CFG_SERIAL_HANG_IN_EXCEPTION: If the print out function will cause the |
| system hang in exception, this flag should be set. |
| |
| There is a design issue for tsi108/109 pci configure read. When pci scan |
| the slots, if there is no pci card, the tsi108/9 will cause a machine |
| check exception for mpc7448 processor. |
| |
| Signed-off-by: Alexandre Bounine <alexandreb@tundra.com> |
| Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| |
| commit 69366bf42f22d67efce8da3f8c40a43d4a3c2695 |
| Author: roy zang <tie-fei.zang@freescale.com> |
| Date: Thu Nov 2 18:34:47 2006 +0800 |
| |
| Add README file for mpc7448hpc2 board. |
| Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| |
| commit 25721b5cec2be4bce79cfade17ec8f6aa1e67526 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Wed Nov 1 02:04:38 2006 +0100 |
| |
| Finish up support for MarelV38B board |
| - add watchdog support |
| - enable GPIO_WKUP_7 pin for input |
| - code cleanup |
| |
| commit ffa150bc90c943ca265170bd1be3f293674dd5c7 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Wed Nov 1 01:45:46 2006 +0100 |
| |
| - Fix issues related to the use of ELDK 4 when compiling for MarelV38B: |
| * remove warnings when compiling ethaddr.c |
| * adjust linker script (fixes a crash resulting from incorrect |
| definition of __u_boot_cmd_start) |
| - Some MarelV38B code cleanup. |
| |
| commit dae80f3caf9754a6dd3ddf3cf903d0c46cbd4385 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Wed Nov 1 01:38:16 2006 +0100 |
| |
| - Add MPC5XXX register definition MPC5XXX_WU_GPIO_DATA_I and change the |
| MPC5XXX_WU_GPIO_DATA macro to MPC5XXX_WU_GPIO_DATA_O (per MPC5200 User's |
| Manual). Replace the uses of MPC5XXX_WU_GPIO_DATA with |
| MPC5XXX_WU_GPIO_DATA_O for affected boards. |
| |
| - Add defintions for some MPC5XXX GPIO pins. |
| |
| commit 82d9c9ec29a1bec1b03ba616425ebaed231072c8 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Wed Nov 1 01:34:29 2006 +0100 |
| |
| Changed MarelV38B board make target to lowercase. Config file cleanup. |
| |
| commit 1954be6e9c9421b45d0a9d05b10356acc7563150 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Sun Oct 29 01:03:51 2006 +0200 |
| |
| Automatically adjust ARFLAGS so "make -s" is really silent. |
| |
| commit fae684e89844856383bdf101440889557df3e6b1 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Oct 28 16:45:00 2006 +0200 |
| |
| [PATCH] omap925.c: Remove unused functions |
| |
| Signed-off-by: Ladislav Michl <ladis@linux-mips.org> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 1265581502ab8ea8c08e8edbe9bf64fbd62fd776 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Oct 28 17:12:58 2006 +0200 |
| |
| [PATCH] Add some missing machtypes for netstar & voiceblue boards |
| |
| Use MACH_TYPE_NETSTAR and MACH_TYPE_VOICEBLUE defines instead of |
| numbers in code. |
| |
| Signed-off-by: Ladislav Michl <ladis@linux-mips.org> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 856f054410cef52d868feb330168b2a4c4091328 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Oct 28 15:55:52 2006 +0200 |
| |
| [PATCH] NAND: Partition name support added to NAND subsystem |
| |
| chpart, nboot and NAND subsystem related commands now accept also partition |
| name to specify offset. |
| |
| Signed-off-by: Ladislav Michl <ladis@linux-mips.org> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 07a69a18c2ecfda904231fdf23e2523ea7792eb6 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Sat Oct 28 02:29:44 2006 +0200 |
| |
| Update CHANGELOG. |
| |
| commit 2751a95abd1b96911081c357e96a12fa97b40dee |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Sat Oct 28 02:29:14 2006 +0200 |
| |
| Enable commandline editing and hush shell on all TQM boards. |
| |
| commit 8078f1a5f63a739b8533478f6c2b62fb1e2f79d7 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Sat Oct 28 02:28:02 2006 +0200 |
| |
| README says CFG_AUTO_COMPLETE, but ocde uses CONFIG_AUTO_COMPLETE |
| |
| commit 471a7be7a042e95e440f5de969c9765214ae8d6e |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sat Oct 28 01:14:32 2006 +0200 |
| |
| Check for illegal character '=' in environment variable names. |
| |
| Make sure the string passed as variable name does not contain a '=' |
| character. This not only prevents the common error or typing |
| "setenv foo=bar" instead of "setenv foo bar", but (more importantly) |
| also closes a backdoor which allowed to delete write-protected |
| environment variables, for example by using "setenv ethaddr=". |
| |
| commit 19973b6ad9863a56f5c5fbcfd90e20ab2490a2c2 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Sat Oct 28 00:38:39 2006 +0200 |
| |
| Minor code cleanup. |
| |
| commit e11887a77d81077416a2d1c5e0354916fee8c034 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Thu Oct 26 17:55:31 2006 +0200 |
| |
| Don't pass any debug options directly to the assembler |
| |
| When passing the -g option to gcc, gcc automatically selects a |
| suitable --g<format> option to pass on to the assembler. |
| Thus, there's no point in forcing a specific debug option on the |
| assembler using the -Wa mechanism. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit ea08ff6e14f9ebb8c07cfa79c51ef540eb087393 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Fri Oct 27 07:47:22 2006 -0500 |
| |
| MPC86xx: Cleaned up unused and conditionally used local variables. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit d38936cdae46bfd2623ff83f6ce9b616d36ab0f9 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Fri Oct 27 11:55:21 2006 +0200 |
| |
| Fix "ar" flags in some Makefiles to allow for silent "make -s" |
| |
| commit 4653f91c13ed51c21cc4c3855745d69a3fb1817f |
| Author: Ben Warren <bwarren@qstreams.com> |
| Date: Thu Oct 26 14:38:25 2006 -0400 |
| |
| Fix TSEC driver (now for real): avoid crashes if PHY is not attached |
| to a TSEC (e.g. a switch is connected via RMII) or |
| if the PHY is defective/incorrectly configured. |
| |
| Signed-off-by: Ben Warren <bwarren@qstreams.com> |
| |
| commit b985b5d6e4fb88f508f7aa0f126c2e27ada2b999 |
| Author: Ben Warren <bwarren@qstreams.com> |
| Date: Thu Oct 26 14:38:25 2006 -0400 |
| |
| Fix TSEC driver: avoid crashes if PHY is not attached |
| to a TSEC (e.g. a switch is connected via RMII) or |
| if the PHY is defective/incorrectly configured. |
| |
| Signed-off-by: Ben Warren <bwarren@qstreams.com> |
| |
| commit 2b2a40bebbf1822506e80e631d7253e60f0e0fe6 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Thu Oct 26 16:24:31 2006 +0200 |
| |
| Code cleanup. |
| |
| commit 5e3b0bc19f07ed277d85324ad0427642c8981baf |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Wed Oct 25 15:48:59 2006 +0200 |
| |
| Finish up support for the ATSTK1000/ATSTK1002 boards |
| |
| Add atstk1002_config target to Makefile and move the AVR32 section |
| down below Blackfin so that it doesn't end up in the middle of |
| MIPS. |
| |
| Drop the autogenerated linker script thing for now. Will have to |
| revisit how to handle chips with different flash and RAM layout |
| later. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit c76f951a747cfb87ba826ef45b5aea82d5b5dbb4 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Tue Oct 24 23:47:37 2006 -0500 |
| |
| Added support for Multi-Image files that contain a device tree |
| |
| If a Multi-Image file contains a third image we try to use it as a |
| device tree. The device tree image is assumed to be uncompressed in the |
| image file. We automatically allocate space for the device tree in memory |
| and provide an 8k pad to allow more than a reasonable amount of growth. |
| |
| Additionally, a device tree that was contained in flash will now automatically |
| get copied to system memory as part of boot. Previously an error was |
| reported if one tried to boot a device tree that was in flash. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 7c52c4b943ff52bbe8796a7e2d3e476ceaf3f512 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Oct 24 21:35:55 2006 +0200 |
| |
| Switch to automatically generated CHANGELOG file. |
| (use "make CHANGELOG" to update it from time to time) |
| |
| commit 7ade0c634a979c32fa91a74e8f5775f24651fbe6 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Oct 24 18:06:48 2006 +0200 |
| |
| Fix bug in PPC440 NAND driver cpu/ppc4xx/ndfc.c |
| Patch by Stefan Roese, 24 Oct 2006 |
| |
| commit 8ae3b713b2286e0c3213b7802062e4c1599010de |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Tue Oct 24 17:24:55 2006 +0200 |
| |
| Merge with /home/wd/git/u-boot/master |
| |
| commit 47a6989c10685d2ab3efcf95228ce50d2a496d3e |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Tue Oct 24 15:32:57 2006 +0200 |
| |
| Code cleanup |
| |
| commit 3a78e3e75b633ecb6413114ffd11e2f000c4f11e |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Tue Oct 24 14:51:36 2006 +0200 |
| |
| Move atstk1000 files into vendor specific directory. |
| Patch by Haavard Skinnemoen, 12 Sep 2006 |
| |
| commit 6ccec4492e77428fd6eafd3dfe94fbdf08e91d37 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Tue Oct 24 14:42:37 2006 +0200 |
| |
| Add ATSTK1000 and ATSTK1002 board support |
| Patch by Haavard Skinnemoen, 06 Sep 2006 |
| |
| This patch adds support for the ATSTK1000 with the ATSTK1002 CPU |
| daughterboard. |
| |
| ATSTK1000 is a full-featured development board for AT32AP CPUs. It |
| has two ethernet ports, a high quality QVGA LCD panel, a loudspeaker, |
| and connectors for USART, PS/2, VGA, USB, MMC/SD cards and |
| CompactFlash cards. For more information, please see this page: |
| |
| http://www.atmel.com/dyn/products/tools.asp?family_id=682 |
| |
| The ATSTK1002 is a daughterboard for the ATSTK1000 supporting the |
| AT32AP7000 chip. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit f93ae788c3640fcde5db383471d45548ff4060d0 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Tue Oct 24 14:31:24 2006 +0200 |
| |
| Add common serial driver for Atmel AT32 and AT91 chips |
| Patch by Haavard Skinnemoen, 06 Sep 2006 |
| |
| This is a first attempt at creating a common serial driver for Atmel |
| chips. For now, it supports the AT32AP7000 AVR32 chip, but it should |
| be possible to support AT91RM9200 and other ARM-based chips with some |
| minor modifications. |
| |
| There's nothing fundamentally AVR32-specific in this driver, but it |
| does use some features which are currently only defined for the |
| AT32AP CPU port: |
| * pm_get_clock_freq: Obtain the clock frequency of a given domain |
| * gd->console_uart: A "struct device" containing information about |
| register mappings, gpio resources and clocks associated with the |
| UART device. |
| |
| For more information about these features, please see the "AT32AP |
| CPU" patch. |
| |
| commit 72a087e04705c26cad982879ebd06b5281bf825a |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Tue Oct 24 14:27:35 2006 +0200 |
| |
| Add AT32AP CPU and AT32AP7000 SoC support |
| Patch by Haavard Skinnemoen, 06 Sep 2006 |
| |
| This patch adds support for the AT32AP CPU family and the AT32AP7000 |
| chip, which is the first chip implementing the AVR32 architecture. |
| |
| The AT32AP CPU core is a high-performance implementation featuring a |
| 7-stage pipeline, separate instruction- and data caches, and a MMU. |
| For more information, please see the "AVR32 AP Technical Reference": |
| |
| http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf |
| |
| In addition to this, the AT32AP7000 chip comes with a large set of |
| integrated peripherals, many of which are shared with the AT91 series |
| of ARM-based microcontrollers from Atmel. Full data sheet is |
| available here: |
| |
| http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 7b64fef33c66be648826c0ff9758298ef13d0604 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Tue Oct 24 14:21:16 2006 +0200 |
| |
| Add AVR32 architecture support |
| Patch by Haavard Skinnemoen, 6 Sep 2006 16:23:02 +0200 |
| |
| This patch adds common infrastructure code for the Atmel AVR32 |
| architecture. See doc/README.AVR32 for details. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 2da2d9a4766063b9848f3a35ad6025499cf87265 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Tue Oct 24 13:57:33 2006 +0200 |
| |
| Use -g instead of -gstabs in AFLAGS_DEBUG |
| Patch by Haavard Skinnemoen, 30 Aug 2006 |
| |
| In config.mk, -Wa,-gstabs is unconditionally appended to AFLAGS no |
| matter what the target's preferred debugging format is. This patch |
| simply replaces -gstabs with -g, so that the default debugging format |
| for the architecture is used. |
| |
| commit 965829872169c2996023840d98e1d85ad148d629 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Tue Oct 24 13:55:18 2006 +0200 |
| |
| Fix/workaround broken dependency handling with make 3.81 |
| Based on patch by Haavard Skinnemoen, 29 Aug 2006 11:20:39 +0200 |
| |
| commit 8318fbf8cc30418b621ea9f39b84b4c1a08f003a |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Mon Oct 23 22:17:05 2006 +0200 |
| |
| Fix sequoia separate object direcory building problems. |
| |
| commit 3dfa9cfdcee78b30da3432318b32821ffabe974b |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Fri Oct 20 17:16:35 2006 -0500 |
| |
| Use generic I2C register block on 85xx and 86xx. |
| |
| Replace private IMMAP I2C structures with generic reg block |
| and allow 86xx to have multiple I2C device busses. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit f5012827df11ca0c9be1df5f8b153e188dc2fa7c |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Fri Oct 20 15:54:34 2006 -0500 |
| |
| Fix compilation warnings on a few 85xx boards. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 2047672684cf85cb6f96a1fbc993180aaaf19a99 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Fri Oct 20 15:50:15 2006 -0500 |
| |
| Converted all 85xx boards to use a common FSL I2C driver. |
| Introduced COFIG_FSL_I2C to select the common FSL I2C driver. |
| And removed hard i2c path from a few u-boot.lds scipts too. |
| Minor whitespace cleanups along the way. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 4d45f69e362b05892c9e92a7907e5820995612aa |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Thu Oct 19 12:02:24 2006 -0500 |
| |
| Rewrite a series of goto statements as a sequences of |
| conditional expressions instead. |
| |
| Use consistent return code 0/-1 for good/bad indicators. |
| |
| Include one fewer file if the driver isn't used at all. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 7237c033b02fe295880435f1eb80819a0c987532 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Thu Oct 19 11:02:16 2006 -0500 |
| |
| Moved i2c driver out of cpu/mpc86xx/i2c.c into drivers/fsl_i2c.c |
| |
| in an effort to begin to unify the umpteen FSL I2C drivers that |
| are all otherwise very similar. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 13a7fcdf37f6ea9429ae04c9df67f893364cfe4b |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Thu Oct 19 11:33:52 2006 -0500 |
| |
| * Fix a bunch of compiler warnings for gcc 4.0 |
| |
| Signed-off-by: Matthew McClintock <msm@freescale.com> |
| |
| commit af9e1f5b9e6f9ce810f5e8bf2961c9542a5865c2 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Oct 17 06:14:31 2006 +0200 |
| |
| Add monitor functions for indirect access to PPC440 DCR's |
| Patch by Leonid Baryudin, 12 Oct 2006 |
| |
| commit 5f3249a0a168e446a4cc9669b2bce0bc456f0a09 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Fri Oct 13 16:47:53 2006 -0500 |
| |
| Fixed leading whitespace issues. |
| Removed spurious LAWAR thing. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 0ee90cb77e01d6e8ccd37e1bd96678597875c391 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Thu Oct 12 10:42:36 2006 -0500 |
| |
| Remove unneeded include files and local variable. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 1eaf3a5ff4960a46f3a9063568ba2af7883f07c5 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Oct 10 00:23:32 2006 -0600 |
| |
| Fix possible uninitialized variable compiler warning. |
| |
| When CONFIG_OF_FLAG_TREE is set, the compiler complains that 'len' in |
| do_bootm_linux() may be uninitialized. There is no possibility in the |
| current code that len will get used uninitialized, but this fix follows |
| the existing convention of setting both len and data to zero at the same |
| time. |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 7376eb87aaa601f728f9b8e5e9cd2711a67f529e |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Oct 11 15:13:01 2006 -0500 |
| |
| * Fix a bunch of compiler warnings for gcc 4.0 |
| |
| Signed-off-by: Matthew McClintock <msm@freescale.com> |
| |
| commit bf651baa365e5447246aad6a633ccd667cf24a39 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Wed Oct 11 10:10:43 2006 -0500 |
| |
| Move "ar" flags to config.mk to allow for silent "make -s" |
| |
| commit 1fd5699a4a24f5c1dab1b32f480bace1ebb9fc3e |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Oct 10 17:19:03 2006 -0500 |
| |
| Coding style changes to remove local varible blocks |
| and reformat a bit nicer. |
| |
| commit 8b283dbb3a08d1b8d406bc15f119e081b3e2606a |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Oct 10 17:16:04 2006 -0500 |
| |
| Fix whitespace issues. |
| |
| commit 7b382b7125f2397cce63253df62f183e3dfa2770 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Oct 10 17:14:45 2006 -0500 |
| |
| Fix whitespace issues. |
| |
| commit e10390ddd736b0dad1528eec4b0fe35c0827139a |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Oct 10 17:06:53 2006 -0500 |
| |
| Fix whitespace issues. |
| |
| commit 89875e96ba3f023157bf50d5f8e33bf254964a76 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Oct 10 17:03:43 2006 -0500 |
| |
| Ran lindent and cleaned up whitespace issues. |
| Format for 80-columns too. |
| |
| commit 333961ae7095fc66d8a041fce1ac9ee873b09d86 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Oct 10 17:02:22 2006 -0500 |
| |
| Fix whitespace and 80-col issues. |
| |
| commit 5c912cb1c31266c66ca59b36f9b6f87296421d75 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Oct 7 11:36:51 2006 +0200 |
| |
| CFG_NAND_QUIET_TEST added to not warn upon missing NAND device |
| Patch by Stefan Roese, 07 Oct 2006 |
| |
| commit 5bc528fa4da751d472397b308137238a6465afd2 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Oct 7 11:35:25 2006 +0200 |
| |
| Update ALPR code (NAND support working now) |
| Patch by Stefan Roese, 07 Oct 2006 |
| |
| commit 77d5034847d328753b80c46b83f960a14a26f40e |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Oct 7 11:33:03 2006 +0200 |
| |
| Remove compile warnings in fpga code |
| Patch by Stefan Roese, 07 Oct 2006 |
| |
| commit f3443867e90d2979a7dd1c65b0d537777e1f9850 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Oct 7 11:30:52 2006 +0200 |
| |
| Add CONFIG_BOARD_RESET to configure board specific reset function |
| Patch by Stefan Roese, 07 Oct 2006 |
| |
| commit f55df18187e7a45cb73fec4370d12135e6691ae1 |
| Author: John Traill <john.traill@freescale.com> |
| Date: Fri Sep 29 08:23:12 2006 +0100 |
| |
| Fix missing tCycle/modfreq calculation. |
| |
| Signed-off-by: John Traill <john.traill@freescale.com> |
| |
| commit 8272dc2f58f2473d8995fcc9b916440cfba080f0 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Wed Sep 13 10:33:35 2006 -0500 |
| |
| Updated config headers to add default FDT-based booting |
| |
| commit 09f3e09e9ebcfa7919ca8931a4b5504fadd1f1d3 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Wed Sep 13 10:34:18 2006 -0500 |
| |
| Add support for eTSEC 3 & 4 on 8548 CDS |
| |
| * Added support for using eTSEC 3 and eTSEC 4 on the 8548 CDS. |
| This will only work on rev 1.3 boards (but doesn't break older boards) |
| * Cleaned up some comments to reflect the expanded role of tsec |
| in other systems |
| |
| commit 084d648b109c8984f83674043c1a7fa3885ef801 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Wed Sep 13 10:33:56 2006 -0500 |
| |
| Added code to support 2.6.18 PCI changes in u-boot |
| |
| * Added code to swizzle the IRQ map for the PCI |
| |
| commit afbdc649f8751e4f4f1a6f527edfe139773f2c15 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Sep 19 09:34:10 2006 -0500 |
| |
| Modified makefile for new build mechanism. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit d14ba6a798beb753e7a864500414fcc2d198b8bc |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Thu Sep 14 08:40:36 2006 -0500 |
| |
| Handle 86xx SVR values according to the new Reference Manual. |
| Both 8641 and 8641D have SVR == 0x8090, and are distinguished |
| by the byte in bits 16-23 instead. |
| Thanks to Jason Jin for noticing. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 88c8f4921fc47fb0eb2384b16586f1bd7f275be7 |
| Author: Zhang Wei <wei.zhang@freescale.com> |
| Date: Mon Aug 28 14:25:31 2006 +0800 |
| |
| Fixed an OF-tree off-by-one bug when adding a new property name. |
| This bug will cause the kernel booting to pause a long time. |
| |
| Signed-off-by: Zhang Wei <wei.zhang@freescale.com> |
| (cherry picked from 2f15776ccc6dc32377d8ba9652b8f58059c27c6d commit) |
| |
| commit 9bff7a69a885adebbd2bd45990494ec4cf998a30 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Aug 29 11:05:09 2006 -0500 |
| |
| Remove trailing empty lines. |
| |
| commit cd6d73d5b895a5935ac4fde0a356288142a584e0 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Aug 29 09:48:49 2006 -0500 |
| |
| Remove bogus msync and use volatile asm. |
| |
| commit 778d45049ce5927b65b3ff1d8e6692b654bdd49e |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Aug 29 08:17:14 2006 -0500 |
| |
| Add myself as maintainer for MPC8641HPCN. |
| |
| commit 2f15776ccc6dc32377d8ba9652b8f58059c27c6d |
| Author: Zhang Wei <wei.zhang@freescale.com> |
| Date: Mon Aug 28 14:25:31 2006 +0800 |
| |
| Fixed an OF-tree off-by-one bug when adding a new property name. |
| This bug will cause the kernel booting to pause a long time. |
| |
| Signed-off-by: Zhang Wei <wei.zhang@freescale.com> |
| |
| commit 5567806b67d0ae83493aa8823ad3b6c914f581d7 |
| Author: Haiying Wang <haiying.wang@freescale.com> |
| Date: Fri Aug 25 14:38:34 2006 -0400 |
| |
| Change ramdiskaddr and dtbaddr |
| Remove PEX fluff commands. |
| |
| Signed-off-by: Haiying Wang <haiying.wang@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit b2b78421d9db49c21a821af8a19c21c1f7dfb29e |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Aug 23 13:32:45 2006 -0500 |
| |
| * Another small fix for booting with disable_of |
| |
| Signed-off-by: Matthew McClintock <msm@freescale.com> |
| |
| commit 4a7cc0f21918e6ecf07ed57075d67df2c4a1299c |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Wed Aug 23 11:04:43 2006 -0500 |
| |
| Cleanup and lindent new AHCI driver. |
| |
| commit dabf9ef8c10b4dead5ef2106ef742b1c06b542de |
| Author: Jin Zhengxiong <jason@bus.ap.freescale.net> |
| Date: Wed Aug 23 19:15:12 2006 +0800 |
| |
| Add AHCI define and sata support for MPC8641HPCN board. |
| |
| Signed-off-by:Jason Jin<jason.jin@freescale.com> |
| |
| commit 4782ac80b02f0d01afd309e2200dd3c7037f2ba4 |
| Author: Jin Zhengxiong <jason@bus.ap.freescale.net> |
| Date: Wed Aug 23 19:10:44 2006 +0800 |
| |
| Add AHCI support to u-boot |
| |
| Add AHCI support in u-boot, enable the sata disk controllers which |
| following the AHCI protocol. |
| |
| Signed-off-by:Jason Jin<jason.jin@freescale.com> |
| |
| commit d8ea2acf5f137cae99417df4f573d036ee384668 |
| Author: Zhang Wei <wei.zhang@freescale.com> |
| Date: Wed Aug 23 17:54:32 2006 +0800 |
| |
| Add dtb boot-up parameter to default boot commands. |
| |
| Signed-off-by: Zhang Wei <wei.zhang@freescale.com> |
| |
| commit b93775c2036b99baa390ea425c4771895bbc63c4 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Aug 22 18:26:08 2006 -0500 |
| |
| Cleanup even more poorly introduced whitespace. |
| |
| commit ae6241685cbcf0c79a3636530d2ceab1fb291a94 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Aug 22 18:07:00 2006 -0500 |
| |
| Cleanup more poorly introduced whitespace. |
| |
| commit 2c33e8a1c535b3ae91cf0b284480600bf3f57c57 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Aug 22 17:54:05 2006 -0500 |
| |
| Cleanup poorly introduced whitespace. |
| |
| commit 80e955c7dd98f4b4fd23c2113caf75ed2b77b5b3 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Aug 22 12:25:27 2006 -0500 |
| |
| General indent and whitespace cleanups. |
| |
| commit ffff3ae56f5842ca3679e4ce7922b819a87aad9f |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Aug 22 12:06:18 2006 -0500 |
| |
| General indent and whitespace cleanups. |
| |
| commit 41a0e8b304d3ff55fe27a230507aac79684016ac |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Aug 22 10:42:21 2006 -0500 |
| |
| Cleanup compiler warnings. |
| |
| commit 5de62c47a8628b3da4d73f7c07027f32a3342d40 |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Tue Aug 22 09:31:59 2006 -0500 |
| |
| Fix disable_of booting |
| |
| Signed-off-by: Matthew McClintock <msm@freescale.com> |
| |
| commit 87a449c8ac396420cb24260f717ea9e6faa82047 |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Tue Aug 22 09:23:55 2006 -0500 |
| |
| Support for FDT in uImage format, error when using FDT from flash |
| |
| Signed-off-by: Matthew McClintock <msm@freescale.com> |
| |
| commit 75c299c38369d01addd5e054b8a16217b70f4a86 |
| Author: Haiying Wang <haiying.wang@freescale.com> |
| Date: Tue Aug 15 15:12:55 2006 -0400 |
| |
| Unlock cache before kernel starts up for MPC86xx |
| |
| commit 67256678f00c09b0a7f19e862e5c1847553d31bc |
| Author: Haiying Wang <haiying.wang@freescale.com> |
| Date: Tue Aug 15 15:13:15 2006 -0400 |
| |
| Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR |
| |
| commit 1c8f6d8fb028f156094d05f2d14298e6479364ac |
| Author: Haiying Wang <haiying.wang@freescale.com> |
| Date: Tue Aug 15 15:12:55 2006 -0400 |
| |
| Unlock cache before kernel starts up for MPC86xx |
| |
| commit 0d9ccc55edf9a7f3c5b2b6263580a6ea8d702a04 |
| Author: Haiying Wang <haiying.wang@freescale.com> |
| Date: Tue Aug 15 15:13:15 2006 -0400 |
| |
| Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR |
| |
| commit 86c8e17f25e972a7e272950a0735fad84e082b88 |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Aug 16 13:59:47 2006 -0500 |
| |
| * Fix disable_of booting |
| |
| Signed-off-by: Matthew McClintock <msm@freescale.com> |
| |
| commit 25c751e9adc86e22fe3b5b47cf2806379b575db7 |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Aug 16 10:54:09 2006 -0500 |
| |
| * Support for FDT in uImage format, error when using FDT from flash |
| |
| Signed-off-by: Matthew McClintock <msm@freescale.com> |
| |
| commit 899620c2d66d4eef3b2a0034d062e71d45d886c9 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Aug 15 14:22:35 2006 +0200 |
| |
| Add initial support for the ALPR board from Prodrive |
| NAND needs some additional testing |
| Patch by Heiko Schocher, 15 Aug 2006 |
| |
| commit f0ff4692ff3372dec55074a8eb444943ab095abb |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Aug 15 14:15:51 2006 +0200 |
| |
| Add FPGA Altera Cyclone 2 support |
| Patch by Heiko Schocher, 15 Aug 2006 |
| |
| commit fecf1c7e4de1b2779edc18742b91c22bdc32b68b |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Aug 14 15:33:38 2006 -0500 |
| |
| Fix BAT0 to actually be cacheable, non-guarded as documented. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 40bc83559db5745681909fd7382ae509567e116d |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Wed Aug 9 15:32:16 2006 -0500 |
| |
| Removed MPC8641HPCN DTS source file from build. |
| It is no longer linked into U-Boot; its sources are |
| now located in the kernel tree. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 34c3c0e01dbf1f8cc2bd08de92f2b89ba84921eb |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:47:03 2006 -0500 |
| |
| * Switched default PCI speed for 8540 ADS back to 33MHz |
| |
| * Added comments and a printf to warn that PCI-X won't |
| work at 33MHz |
| Patch by Andy Fleming 17-Mar-2006 |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit b6c5e1373b6ea0bb37a18e4aeecec00613d1cd39 |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:46:35 2006 -0500 |
| |
| * Fixed a bug where 8555 PCI code used the old variable and function names Patch by Andy Fleming 17-Mar-2006 |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit bf1dfffd8c26f8ecdd630a0ae4c834e751e4e452 |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:46:13 2006 -0500 |
| |
| * Added VIA configuration table |
| |
| * Added support for PCI2 on CDS |
| Patch by Andy Fleming 17-Mar-2006 |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit c88f9fe66b64247e5b6a38410ba315ca25596d16 |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:45:41 2006 -0500 |
| |
| * Fixed PCI memory definitions Patch by Andy Fleming 17-Mar-2006 |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 97074ed9655309b64231bc2cee69fe85399f8055 |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:45:17 2006 -0500 |
| |
| * Added support for initializing second PCI bus on 85xx Patch by Andy Fleming 17-Mar-2006 |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit f0e6f57f71b3c4fdd13028eb03c3f3e91926dda2 |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:44:49 2006 -0500 |
| |
| * Added PCI-X #defines for PCI-X initialization Patch by Andy Fleming on 17-Mar-2006 |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit a4e11558b810ef2cddffdf7b9d86bc1130441960 |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:44:23 2006 -0500 |
| |
| * Made sure the code which disables prefetch for PCI devices sets the size of the prefetch region to 0 Patch by Andy Fleming on 17-Mar-2006 |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 0e16387db1d4aacd5bf35cb6d7c1942765c0347b |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:43:36 2006 -0500 |
| |
| * Add Flat Dev Tree construction for MPC85xx ADS and CDS boards Patch by Jon Loeliger 17-Jan-2006 |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 855e6fb073f9d04fe4a7f06c107ecbac6344ddd4 |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:43:00 2006 -0500 |
| |
| * Removed the oftree.dts for stxxtx in light of the changes to the flat device tree handling code Patch by Matthew McClintock 26-June-2006 |
| |
| commit 5498d90312aad9f6bdbf047986027c35b03cd163 |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:42:24 2006 -0500 |
| |
| * Patch to modify ft_build.c to update flat device trees in place Patch by Matthew McClintock 26-June-2006 |
| |
| commit 0267768eddc5ca7bc1865bc40c866829ac5efbfe |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:41:37 2006 -0500 |
| |
| * Modify bootm command to support booting with flat device trees Patch by Matthew McClintock 26-June-2006 |
| |
| commit 8fc8bd2cc479b6cd188fdede4010e0e052970b8a |
| Author: John Traill <john.traill@freescale.com> |
| Date: Wed Aug 9 14:33:50 2006 +0100 |
| |
| Add Rapidio support for the MPC8641HPCN |
| |
| Signed-off-by: John Traill <john.traill@freescale.com> |
| |
| commit 91a414c7d1fb0eac912592cd995b30c9f23045c9 |
| Author: John Traill <john.traill@freescale.com> |
| Date: Tue Aug 8 11:32:43 2006 +0100 |
| |
| Fix caslat calculation |
| |
| Signed-off-by: John Traill <john.traill@freescale.com> |
| |
| commit 709d3073e74153278e7904a70819bbef7df50e1a |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Thu Aug 3 16:17:56 2006 -0500 |
| |
| Convert to mac-address in ethernet nodes. |
| |
| commit 71748af833ca1017edf1415be376366ff2937d17 |
| Author: Haiying Wang <haiying.wang@freescale.com> |
| Date: Fri Jul 28 12:41:35 2006 -0400 |
| |
| Correct the irq value of DUART2 |
| |
| commit 9cb3e8816ae4d854e7dc22128c3eea3d70bb982c |
| Author: Haiying Wang <haiying.wang@freescale.com> |
| Date: Fri Jul 28 12:41:41 2006 -0400 |
| |
| Change the space size of PEX IO in README |
| |
| commit 239db37c94f7a92941c4465feceb867c609241c5 |
| Author: Haiying Wang <haiying.wang@freescale.com> |
| Date: Fri Jul 28 12:41:18 2006 -0400 |
| |
| Move get_board_sys_clk to board directory |
| |
| commit 492900b985439fbce1a118afde1e35def870db03 |
| Author: John Traill <john.traill@freescale.com> |
| Date: Fri Jul 28 09:03:54 2006 +0100 |
| |
| Fix 8641HPCN pollution |
| |
| commit 515ab8a62e8574e2babc6e8dcc43544ad221c5b2 |
| Author: John Traill <john.traill@freescale.com> |
| Date: Fri Jul 28 08:16:06 2006 +0100 |
| |
| Fix 8641HPCN timebase |
| |
| commit c86360b830f1eecd7a72208575dde4f57879faea |
| Author: Zhang Wei <wei.zhang@freescale.com> |
| Date: Fri Jul 28 00:01:34 2006 +0800 |
| |
| Fixed OF device tree of mpc86xxhpcn board. |
| |
| The changes works in with kernel irq mapping rework. |
| |
| Signed-off-by: Zhang Wei <wei.zhang@freescale.com> |
| |
| commit bea3f28d285942bf3f7ab339ce85178ded544225 |
| Author: Haiying Wang <haiying.wang@freescale.com> |
| Date: Wed Jul 12 10:48:05 2006 -0400 |
| |
| Add support for reading and writing mac addresses to or from ID EEPROM. |
| |
| Added code for reading and writing Mac addresses to/from ID EEPROM(0x57). |
| With attached patch, we can use command "mac/mac read/mac save/" |
| to read and write EEPROM under u-boot prompt. |
| |
| U-boot will calculate the checksum of EEPROM while bootup, |
| if it is right, then u-boot will check whether the mac address |
| of eTSEC0/1/2/3 is availalbe (non-zero). |
| |
| If there is mac address availabe in EEPROM, u-boot will use it, |
| otherewise, u-boot will use the mac address defined in |
| MPC8641HPCN.h. This matches the requirement to set unique mac address |
| for each TSEC port. |
| |
| Signed-off-by: Haiying Wang <haiying.wang@freescale.com> |
| Signed-off-by: York Sun <yorksun@freescale.com> |
| |
| commit fcb28e763415e0e4e66b0f45842d1557ae198e5e |
| Author: Jin Zhengxiong <Jason.Jin@freescale.com> |
| Date: Thu Jul 13 10:35:10 2006 -0500 |
| |
| Fixed initrd issue by define big RAM |
| |
| Signed-off-by:Jason Jin <Jason.jin@freescale.com> |
| |
| commit e6cd2a1785d74ec3d30a86f1cb360be8de478151 |
| Author: Jason Jin <Jason.jin@freescale.com> |
| Date: Fri Jul 7 10:01:45 2006 -0500 |
| |
| We made a u-boot patch to fix the hang up issue |
| when booting filesystem from ramdisk. |
| |
| Signed-off-by:Jason Jin <Jason.jin@freescale.com> |
| |
| commit 38433ccc5850ee70549af0b2bc5b920355ef5388 |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:47:03 2006 -0500 |
| |
| * Switched default PCI speed for 8540 ADS back to 33MHz |
| * Added comments and a printf to warn that PCI-X won't |
| work at 33MHz |
| Patch by Andy Fleming 17-Mar-2006 |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit e4c2a0eb0c3e3ffbf824800184ee42bdc99d5b19 |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:46:35 2006 -0500 |
| |
| * Fixed a bug where 8555 PCI code used the old variable and |
| function names |
| Patch by Andy Fleming 17-Mar-2006 |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit cbfc7ce756b88eb26e5537bc7b625c445c6dcfac |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:46:13 2006 -0500 |
| |
| * Added VIA configuration table |
| * Added support for PCI2 on CDS |
| Patch by Andy Fleming 17-Mar-2006 |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 52c7a68b8d587ebcf5a6b051b58b3d3ffa377ddc |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:45:41 2006 -0500 |
| |
| * Fixed PCI memory definitions |
| Patch by Andy Fleming 17-Mar-2006 |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 087454609e47295443af793a282cddcd91a5f49c |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:45:17 2006 -0500 |
| |
| * Added support for initializing second PCI bus on 85xx |
| Patch by Andy Fleming 17-Mar-2006 |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit b636aaeb6fd516a442fb611bbeeddf3077a687fb |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:44:49 2006 -0500 |
| |
| * Added PCI-X #defines for PCI-X initialization |
| Patch by Andy Fleming on 17-Mar-2006 |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 20abbc6fffa115690107cc942c7abf84bdc03a1b |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:44:23 2006 -0500 |
| |
| * Made sure the code which disables prefetch for PCI devices |
| sets the size of the prefetch region to 0 |
| Patch by Andy Fleming on 17-Mar-2006 |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 40d5fa35d02df22580593bf0039ab173367e8ef0 |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:43:36 2006 -0500 |
| |
| * Add Flat Dev Tree construction for MPC85xx ADS and CDS boards |
| Patch by Jon Loeliger 17-Jan-2006 |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit be7e8b0cb5a0c49dc180075b96df296a893bf146 |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:43:00 2006 -0500 |
| |
| * Removed the oftree.dts for stxxtx in light of the changes |
| to the flat device tree handling code |
| Patch by Matthew McClintock 26-June-2006 |
| |
| commit 1b380ec225665e73959677f3893dc658c5925e05 |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:42:24 2006 -0500 |
| |
| * Patch to modify ft_build.c to update flat device trees in place |
| Patch by Matthew McClintock 26-June-2006 |
| |
| commit 98a9c4d468a942a09ebe8979bec508017f3e4462 |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:41:37 2006 -0500 |
| |
| * Modify bootm command to support booting with flat device trees |
| Patch by Matthew McClintock 26-June-2006 |
| |
| commit da012ab661fd4ab169dd7b9b32201a4df62cf34a |
| Author: Jin Zhengxiong <Jason.Jin@freescale.com> |
| Date: Wed Jun 28 08:43:56 2006 -0500 |
| |
| Change Id to symbolic name for RTL8139 |
| |
| Signed-off-by: Jason Jin <Jason.jin@freescale.com> |
| |
| commit bc09cf3c2bfb8d54c659cbb332f79d0950982fd0 |
| Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com> |
| Date: Tue Jun 27 18:12:10 2006 +0800 |
| |
| Fix RTL8139 in big endian |
| |
| signed-off-by: Jason Jin <Jason.Jin@freescale.com> |
| signed-off-by: Wei Zhang <wei.zhang@freescale.com> |
| |
| commit fcfb9a57947fc203b99fe81ab0578f7286261f9f |
| Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com> |
| Date: Tue Jun 27 18:12:23 2006 +0800 |
| |
| Fix Tsec bug when no link |
| |
| When tftp a non-exist file from the tftp server, u-boot will check |
| the link of all eth port. The original file will return wrong link |
| state on the no link ports. |
| |
| signed-off-by: Jason Jin <Jason.Jin@freescale.com> |
| |
| commit bd22c2b97514fbfb0e03bd9c72b3445e4dbd57e2 |
| Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com> |
| Date: Tue Jun 27 18:12:02 2006 +0800 |
| |
| Fix bug for io_bar size during pci scan |
| |
| During the pci scan process, Some devices return bar_reponse with the |
| highest bytes 0, such as the pci bridge in uli1575 return bar_response |
| with 0xffffff, So the bar_size should be manually set under 64K. |
| |
| Signed-off-by: Jason Jin <jason.jin@freescale.com> |
| |
| commit fa7db9c377bc2353a17bf1d381d65a6c418728f0 |
| Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com> |
| Date: Tue Jun 27 18:11:54 2006 +0800 |
| |
| Enable PCIE1 for MPC8641HPCN board |
| |
| Signed-off-by: Jason Jin <Jason.jin@freescale.com> |
| |
| commit 99d70e3a47affb9bae041a2caece7cd516e213b3 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Mon Jun 26 11:06:00 2006 +0200 |
| |
| More code cleanup |
| |
| commit 684623ce92c5fd32e7db2d6e016945a67c5ffaba |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Thu Jun 22 08:51:46 2006 -0500 |
| |
| Fix bug in 8641hpcn reset command with no args. |
| |
| Signed-off-by: Haiying Wang <haiying.wang@freescale.com> |
| Acked-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 8be429a5ddbf0ebe2d94174ba58fcfc7a24285dc |
| Author: Zhang Wei <wei.zhang@freescale.com> |
| Date: Tue Jun 20 17:47:15 2006 +0800 |
| |
| Reworked IRQ mapping in OF-tree. |
| |
| commit 0e4c2a17ca34001ed36d259f13cb88ada4611a8c |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Thu Jun 15 21:33:37 2006 -0500 |
| |
| Do not enable address translation on secondary CPUs. |
| Do not set up BATs on secondary CPUs. Let Linux do the nasty. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 386eda022473394ad8f36b86f2bdc9b4cb816291 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Wed Jun 14 18:14:56 2006 +0200 |
| |
| Code cleanup |
| |
| commit 16c8d5e76ae0f78f39a60608574adfe0feb9cc70 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Wed Jun 14 17:45:53 2006 +0200 |
| |
| Various USB related patches |
| - Add support for mpc8xx USB device. |
| - Add support for Common Device Class - Abstract Control Model USB console. |
| - Add support for flow control in USB slave devices. |
| - Add support for switching between gserial and cdc_acm using environment. |
| - Minor changes to usbdcore_omap1510.c usbdcore_omap1510.h |
| - Update usbcore slightly to ease host enumeration. |
| - Fix non-portable endian problems in usbdcore and usbdcore_ep0. |
| - Add AdderUSB_config as a defconfig to enable usage of the USB console |
| by default with the Adder87x U-Boot port. |
| Patches by Bryan O'Donoghue <bodonoghue@codehermit.ie>, 29 May 2006 |
| |
| commit 8ecc971618f56029ad99d3516f8b297a6ed58971 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jun 7 10:53:55 2006 -0500 |
| |
| Fix a get_board_sys_clk() use-before-def warning. |
| |
| Signed-off-by: Jon Loeliger <jdl@jdl.com> |
| |
| commit d9bf4858fca5aa4d651b283270f77da72ebadfd5 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jun 7 10:52:49 2006 -0500 |
| |
| Allow DTC path to be passed in. |
| |
| Signed-off-by: Jon Loeliger <jdl@jdl.com> |
| |
| commit c83ae9ea6d93abbe751bf8a3396236a084e56f87 |
| Author: Haiying Wang <haiying.wang@freescale.com> |
| Date: Tue Jun 6 16:54:29 2006 -0400 |
| |
| Modify the IRQ of DUART2 |
| |
| commit c934f655f9aeca70a5c5f88b465d9e9d57a8d22e |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed May 31 13:55:35 2006 -0500 |
| |
| Review cleanups. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit cb5965fb95b77a49f4e6af95248e0c849f4af03e |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed May 31 12:44:44 2006 -0500 |
| |
| White space cleanup. |
| Some 80-column cleanups. |
| Convert printf() to puts() where possible. |
| Use #include "spd_sdram.h" as needed. |
| Enhanced reset command usage message a bit. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 3d5c5be547445dd3bd2eb7368d80df03ea437970 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed May 31 11:39:34 2006 -0500 |
| |
| Removed unneeded local_bus_init() from 8641HPCN board. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 4d3d729c16c392d2982d3266b659d333c927697d |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed May 31 11:24:28 2006 -0500 |
| |
| Moved mpc8641hpcn_board_reset() out of cpu/ into board/. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit b2a941de060350ad15878d8219825f4950e9bb8e |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed May 31 10:07:28 2006 -0500 |
| |
| Remove dead debug code. |
| |
| Signed-off-by: Jon Loeliger <jdl@jdl.com> |
| |
| commit 126aa70f10ba3d20e0a6f4d32328250513b77770 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue May 30 17:47:00 2006 -0500 |
| |
| Move mpc86xx PIXIS code to board directory |
| |
| First cut at moving the PIXIS platform code out of |
| the 86xx cpu directory and into board/mpc8641hpcn |
| where it belongs. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit ddf83a2fcef1a670c45fc585119dcc1fe062c4a9 |
| Author: Markus Klotzbuecher <mk@denx.de> |
| Date: Tue May 30 16:56:14 2006 +0200 |
| |
| Support generic OHCI support for the s3c24x0 cpu. |
| |
| commit 38cee12dcfcc257371c901c7e13e58ecab0a35d8 |
| Author: Haiying Wang <Haiying.Wang@freescale.com> |
| Date: Tue May 30 09:10:32 2006 -0500 |
| |
| Improve "reset" command's interaction with watchdog. |
| |
| "reset altbank" will reset another bank WITHOUT watch dog timer enabled |
| "reset altbank wd" will reset another bank WITH watch dog enabled |
| "diswd" will disable watch dog after u-boot boots up successfully |
| |
| Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> |
| |
| commit 70205e5a6ddc8528b11db9eb4d3fa0209d9fce2a |
| Author: Haiying Wang <Haiying.Wang@freescale.com> |
| Date: Tue May 30 08:51:19 2006 -0500 |
| |
| Fix two SDRAM setup bugs. |
| |
| Fix ECC setup bug. |
| Enable 1T/2T based on number of DIMMs present. |
| |
| Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> |
| |
| commit d11fec5015334deb2010e36ce00bb118cc5429a5 |
| Author: Haiying Wang <Haiying.Wang@freescale.com> |
| Date: Fri May 26 10:24:48 2006 -0500 |
| |
| Add first draft of the MPC8641HPCN doc/README. |
| |
| Signed-off-by: Jon Loeliger <jdl@jdl.com> |
| |
| commit ed45d6c930b5939718a87ee12e25cf9a05978d4a |
| Author: Haiying Wang <Haiying.Wang@freescale.com> |
| Date: Fri May 26 10:13:04 2006 -0500 |
| |
| Added pci@8000 block. |
| Updated ethernet interrupt mappings (moved up 48). |
| Cleaned up a few comments. |
| |
| Signed-off-by: Jon Loeliger <jdl@jdl.com> |
| |
| commit 3033ebb20fd7c372c7bca3c9955a4692bb2240b7 |
| Author: Haiying Wang <Haiying.Wang@freescale.com> |
| Date: Fri May 26 10:01:16 2006 -0500 |
| |
| Allow args on reset command. |
| |
| Signed-off-by: Jon Loeliger <jdl@jdl.com> |
| |
| commit 301f1aa384d0edcae6a22fd9adb933ad71695ecc |
| Author: Markus Klotzbuecher <mk@denx.de> |
| Date: Tue May 23 13:38:35 2006 +0200 |
| |
| Changed the mp2usb (at91rm9200) board to use the generic OHCI driver. Some |
| fixes to the latter. |
| |
| commit 24e37645e7378b20fa8f20e2996c8fb8e90c70c9 |
| Author: Markus Klotzbuecher <mk@denx.de> |
| Date: Tue May 23 10:33:11 2006 +0200 |
| |
| More cleanup for the delta board and the generic usb_ohci driver. Added |
| CFG_USB_BOARD_INIT and CFG_USB_CPU_INIT for enabling board and cpu specific |
| initialization and cleanup hooks respectively. |
| |
| commit 3e326ece9eba8184f5d48aa4fb87760a8f6f0f10 |
| Author: Markus Klotzbuecher <mk@denx.de> |
| Date: Mon May 22 16:33:54 2006 +0200 |
| |
| This patch adds USB storage support for the delta board. This is the first |
| board to make use of a generic OHCI driver, that calls hooks for board |
| dependant initialization. |
| |
| commit 14e37081ff3cac7ebe6e93836523429853b6b292 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Fri May 19 13:28:39 2006 -0500 |
| |
| Change arbitration to round-robin for SMP linux. |
| |
| commit 9a655876e5995be80f49054e2509500e871e4d3a |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Fri May 19 13:26:34 2006 -0500 |
| |
| Enable dual DDR controllers and interleaving. |
| |
| commit 586d1d5abd3e525f1e1d9b81e5a61a4da6b2fa3c |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Fri May 19 13:22:44 2006 -0500 |
| |
| Update 86xx address map and LAWBARs. |
| |
| commit cccce5d0581bb0ba4602799a4b5112e58d1579cb |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Fri May 19 13:14:15 2006 -0500 |
| |
| Remove L2 Cache invalidate polling. |
| |
| commit f35ec68fb066cec0e36294bfe07dec2d4e8ad3a8 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Fri May 19 12:33:09 2006 -0500 |
| |
| Enable 2nd CPU and I2C. |
| |
| commit bf690dcb512d34c4fceec0eb1e5c0e88a9db5d54 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon May 15 07:26:56 2006 -0500 |
| |
| Update interrupt mapping. |
| |
| commit 6cfea33477b04b63ed47386ed1629529484c33ba |
| Author: Haiying Wang <Haiying.Wang@freescale.com> |
| Date: Wed May 10 09:38:06 2006 -0500 |
| |
| Remove unneeded INIT_RAM_LOCK cache twiddling. |
| Correctly tracks r29 as global data pointer now. |
| |
| Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> |
| |
| commit d4dd317b58c126a2a7e73f4764ecc1a7c97f876c |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Wed May 10 09:33:07 2006 -0500 |
| |
| Remove unnecessary flash.c file. |
| |
| commit 18b6c8cd8af6cc7f35180cedc4adb3236cc1a1b8 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue May 9 08:23:49 2006 -0500 |
| |
| Get MPC8641HPCN flash images working. |
| |
| Enable the CFI driver. |
| Remove bogus LAWBAR7 cruft. |
| Use correct TEXT_BASE, Fixup load script. |
| Enable SPD EEPROM during DDR setup. |
| Use generic RFC 1918 IP addresses by default. |
| |
| commit 5c9efb36a6b5431423f52888a0e3b4b515fe7eca |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Thu Apr 27 10:15:16 2006 -0500 |
| |
| Cleanup whitespaces and style issues. |
| Removed //-style comments. |
| Use 80-column lines. |
| Remove trailing whitespace. |
| Remove dead code and debug cruft. |
| |
| commit a2320a6bf8113a09544c42d160d10ac69d049a03 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Thu Apr 27 08:22:39 2006 -0500 |
| |
| Revert bad PCI prefetch limit change. |
| |
| commit debb7354d1ea4f694154818df5e5b523f5c1cc1d |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Wed Apr 26 17:58:56 2006 -0500 |
| |
| Initial support for MPC8641 HPCN board. |