| // SPDX-License-Identifier: GPL-2.0-only OR MIT |
| /* |
| * Device Tree Source for AM625 SoC Family Wakeup Domain peripherals |
| * |
| * Copyright (C) 2020-2024 Texas Instruments Incorporated - https://www.ti.com/ |
| */ |
| |
| #include <dt-bindings/bus/ti-sysc.h> |
| |
| &cbass_wakeup { |
| wkup_conf: syscon@43000000 { |
| bootph-all; |
| compatible = "syscon", "simple-mfd"; |
| reg = <0x00 0x43000000 0x00 0x20000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x00 0x43000000 0x20000>; |
| |
| chipid: chipid@14 { |
| bootph-all; |
| compatible = "ti,am654-chipid"; |
| reg = <0x14 0x4>; |
| }; |
| |
| cpsw_mac_syscon: ethernet-mac-syscon@200 { |
| compatible = "ti,am62p-cpsw-mac-efuse", "syscon"; |
| reg = <0x200 0x8>; |
| }; |
| |
| usb0_phy_ctrl: syscon@4008 { |
| compatible = "ti,am62-usb-phy-ctrl", "syscon"; |
| reg = <0x4008 0x4>; |
| }; |
| |
| usb1_phy_ctrl: syscon@4018 { |
| compatible = "ti,am62-usb-phy-ctrl", "syscon"; |
| reg = <0x4018 0x4>; |
| }; |
| }; |
| |
| target-module@2b300050 { |
| compatible = "ti,sysc-omap2", "ti,sysc"; |
| reg = <0x00 0x2b300050 0x00 0x4>, |
| <0x00 0x2b300054 0x00 0x4>, |
| <0x00 0x2b300058 0x00 0x4>; |
| reg-names = "rev", "sysc", "syss"; |
| ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | |
| SYSC_OMAP2_SOFTRESET | |
| SYSC_OMAP2_AUTOIDLE)>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| ti,syss-mask = <1>; |
| ti,no-reset-on-init; |
| power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>; |
| clocks = <&k3_clks 114 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x00 0x2b300000 0x100000>; |
| |
| wkup_uart0: serial@0 { |
| compatible = "ti,am64-uart", "ti,am654-uart"; |
| reg = <0x0 0x100>; |
| interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| }; |
| }; |
| |
| wkup_i2c0: i2c@2b200000 { |
| compatible = "ti,am64-i2c", "ti,omap4-i2c"; |
| reg = <0x00 0x2b200000 0x00 0x100>; |
| interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| power-domains = <&k3_pds 107 TI_SCI_PD_EXCLUSIVE>; |
| clocks = <&k3_clks 107 4>; |
| clock-names = "fck"; |
| status = "disabled"; |
| }; |
| |
| wkup_rtc0: rtc@2b1f0000 { |
| compatible = "ti,am62-rtc"; |
| reg = <0x00 0x2b1f0000 0x00 0x100>; |
| interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&k3_clks 117 6> , <&k3_clks 117 0>; |
| clock-names = "vbus", "osc32k"; |
| power-domains = <&k3_pds 117 TI_SCI_PD_EXCLUSIVE>; |
| wakeup-source; |
| }; |
| |
| wkup_rti0: watchdog@2b000000 { |
| compatible = "ti,j7-rti-wdt"; |
| reg = <0x00 0x2b000000 0x00 0x100>; |
| clocks = <&k3_clks 132 0>; |
| power-domains = <&k3_pds 132 TI_SCI_PD_EXCLUSIVE>; |
| assigned-clocks = <&k3_clks 132 0>; |
| assigned-clock-parents = <&k3_clks 132 2>; |
| /* Used by DM firmware */ |
| status = "reserved"; |
| }; |
| |
| wkup_vtm0: temperature-sensor@b00000 { |
| compatible = "ti,j7200-vtm"; |
| reg = <0x00 0xb00000 0x00 0x400>, |
| <0x00 0xb01000 0x00 0x400>; |
| power-domains = <&k3_pds 95 TI_SCI_PD_EXCLUSIVE>; |
| #thermal-sensor-cells = <1>; |
| }; |
| }; |