| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/pci/rockchip-dw-pcie-ep.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: DesignWare based PCIe Endpoint controller on Rockchip SoCs |
| |
| maintainers: |
| - Niklas Cassel <cassel@kernel.org> |
| |
| description: |+ |
| RK3588 SoC PCIe Endpoint controller is based on the Synopsys DesignWare |
| PCIe IP and thus inherits all the common properties defined in |
| snps,dw-pcie-ep.yaml. |
| |
| allOf: |
| - $ref: /schemas/pci/snps,dw-pcie-ep.yaml# |
| - $ref: /schemas/pci/rockchip-dw-pcie-common.yaml# |
| |
| properties: |
| compatible: |
| enum: |
| - rockchip,rk3568-pcie-ep |
| - rockchip,rk3588-pcie-ep |
| |
| reg: |
| items: |
| - description: Data Bus Interface (DBI) registers |
| - description: Data Bus Interface (DBI) shadow registers |
| - description: Rockchip designed configuration registers |
| - description: Memory region used to map remote RC address space |
| - description: Internal Address Translation Unit (iATU) registers |
| |
| reg-names: |
| items: |
| - const: dbi |
| - const: dbi2 |
| - const: apb |
| - const: addr_space |
| - const: atu |
| |
| required: |
| - interrupts |
| - interrupt-names |
| |
| unevaluatedProperties: false |
| |
| examples: |
| - | |
| #include <dt-bindings/clock/rockchip,rk3588-cru.h> |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/interrupt-controller/irq.h> |
| #include <dt-bindings/power/rk3588-power.h> |
| #include <dt-bindings/reset/rockchip,rk3588-cru.h> |
| |
| soc { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| |
| pcie3x4_ep: pcie-ep@fe150000 { |
| compatible = "rockchip,rk3588-pcie-ep"; |
| reg = <0xa 0x40000000 0x0 0x00100000>, |
| <0xa 0x40100000 0x0 0x00100000>, |
| <0x0 0xfe150000 0x0 0x00010000>, |
| <0x9 0x00000000 0x0 0x40000000>, |
| <0xa 0x40300000 0x0 0x00100000>; |
| reg-names = "dbi", "dbi2", "apb", "addr_space", "atu"; |
| clocks = <&cru ACLK_PCIE_4L_MSTR>, <&cru ACLK_PCIE_4L_SLV>, |
| <&cru ACLK_PCIE_4L_DBI>, <&cru PCLK_PCIE_4L>, |
| <&cru CLK_PCIE_AUX0>, <&cru CLK_PCIE4L_PIPE>; |
| clock-names = "aclk_mst", "aclk_slv", |
| "aclk_dbi", "pclk", |
| "aux", "pipe"; |
| interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH 0>, |
| <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH 0>, |
| <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH 0>, |
| <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH 0>, |
| <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH 0>, |
| <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH 0>, |
| <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH 0>, |
| <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH 0>, |
| <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH 0>; |
| interrupt-names = "sys", "pmc", "msg", "legacy", "err", |
| "dma0", "dma1", "dma2", "dma3"; |
| max-link-speed = <3>; |
| num-lanes = <4>; |
| phys = <&pcie30phy>; |
| phy-names = "pcie-phy"; |
| power-domains = <&power RK3588_PD_PCIE>; |
| resets = <&cru SRST_PCIE0_POWER_UP>, <&cru SRST_P_PCIE0>; |
| reset-names = "pwr", "pipe"; |
| }; |
| }; |
| ... |