drivers/mtd/nand/raw/nand_spl_simple.c - filogic/uboot - Gitiles

 // SPDX-License-Identifier: GPL-2.0+
 /*
  * (C) Copyright 2006-2008
  * Stefan Roese, DENX Software Engineering, sr@denx.de.
  */

 #include <common.h>
 #include <nand.h>
 #include <system-constants.h>
 #include <asm/io.h>
 #include <linux/mtd/nand_ecc.h>
 #include <linux/mtd/rawnand.h>

 static int nand_ecc_pos[] = CFG_SYS_NAND_ECCPOS;
 static struct mtd_info *mtd;
 static struct nand_chip nand_chip;

 #define ECCSTEPS	(CONFIG_SYS_NAND_PAGE_SIZE / \
 					CFG_SYS_NAND_ECCSIZE)
 #define ECCTOTAL	(ECCSTEPS * CFG_SYS_NAND_ECCBYTES)


 #if (CONFIG_SYS_NAND_PAGE_SIZE <= 512)
 /*
  * NAND command for small page NAND devices (512)
  */
 static int nand_command(int block, int page, uint32_t offs,
 	u8 cmd)
 {
 	struct nand_chip *this = mtd_to_nand(mtd);
 	int page_addr = page + block * SYS_NAND_BLOCK_PAGES;

 	while (!this->dev_ready(mtd))
 		;

 	/* Begin command latch cycle */
 	this->cmd_ctrl(mtd, cmd, NAND_CTRL_CLE | NAND_CTRL_CHANGE);
 	/* Set ALE and clear CLE to start address cycle */
 	/* Column address */
 	this->cmd_ctrl(mtd, offs, NAND_CTRL_ALE | NAND_CTRL_CHANGE);
 	this->cmd_ctrl(mtd, page_addr & 0xff, NAND_CTRL_ALE); /* A[16:9] */
 	this->cmd_ctrl(mtd, (page_addr >> 8) & 0xff,
 		       NAND_CTRL_ALE); /* A[24:17] */
 	/* Latch in address */
 	this->cmd_ctrl(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);

 	/*
 	 * Wait a while for the data to be ready
 	 */
 	while (!this->dev_ready(mtd))
 		;

 	return 0;
 }
 #else
 /*
  * NAND command for large page NAND devices (2k)
  */
 static int nand_command(int block, int page, uint32_t offs,
 	u8 cmd)
 {
 	struct nand_chip *this = mtd_to_nand(mtd);
 	int page_addr = page + block * SYS_NAND_BLOCK_PAGES;
 	void (*hwctrl)(struct mtd_info *mtd, int cmd,
 			unsigned int ctrl) = this->cmd_ctrl;

 	while (!this->dev_ready(mtd))
 		;

 	/* Emulate NAND_CMD_READOOB */
 	if (cmd == NAND_CMD_READOOB) {
 		offs += CONFIG_SYS_NAND_PAGE_SIZE;
 		cmd = NAND_CMD_READ0;
 	}

 	/* Shift the offset from byte addressing to word addressing. */
 	if ((this->options & NAND_BUSWIDTH_16) && !nand_opcode_8bits(cmd))
 		offs >>= 1;

 	/* Begin command latch cycle */
 	hwctrl(mtd, cmd, NAND_CTRL_CLE | NAND_CTRL_CHANGE);
 	/* Set ALE and clear CLE to start address cycle */
 	/* Column address */
 	hwctrl(mtd, offs & 0xff,
 		    NAND_CTRL_ALE | NAND_CTRL_CHANGE); /* A[7:0] */
 	hwctrl(mtd, (offs >> 8) & 0xff, NAND_CTRL_ALE); /* A[11:9] */
 	/* Row address */
 	hwctrl(mtd, (page_addr & 0xff), NAND_CTRL_ALE); /* A[19:12] */
 	hwctrl(mtd, ((page_addr >> 8) & 0xff),
 		    NAND_CTRL_ALE); /* A[27:20] */
 #ifdef CONFIG_SYS_NAND_5_ADDR_CYCLE
 	/* One more address cycle for devices > 128MiB */
 	hwctrl(mtd, (page_addr >> 16) & 0x0f,
 		       NAND_CTRL_ALE); /* A[31:28] */
 #endif
 	/* Latch in address */
 	hwctrl(mtd, NAND_CMD_READSTART,
 		    NAND_CTRL_CLE | NAND_CTRL_CHANGE);
 	hwctrl(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);

 	/*
 	 * Wait a while for the data to be ready
 	 */
 	while (!this->dev_ready(mtd))
 		;

 	return 0;
 }
 #endif

 static int nand_is_bad_block(int block)
 {
 	struct nand_chip *this = mtd_to_nand(mtd);
 	u_char bb_data[2];

 	nand_command(block, 0, CONFIG_SYS_NAND_BAD_BLOCK_POS,
 		NAND_CMD_READOOB);

 	/*
 	 * Read one byte (or two if it's a 16 bit chip).
 	 */
 	if (this->options & NAND_BUSWIDTH_16) {
 		this->read_buf(mtd, bb_data, 2);
 		if (bb_data[0] != 0xff || bb_data[1] != 0xff)
 			return 1;
 	} else {
 		this->read_buf(mtd, bb_data, 1);
 		if (bb_data[0] != 0xff)
 			return 1;
 	}

 	return 0;
 }

 #if defined(CONFIG_SYS_NAND_HW_ECC_OOBFIRST)
 static int nand_read_page(int block, int page, uchar *dst)
 {
 	struct nand_chip *this = mtd_to_nand(mtd);
 	u_char ecc_calc[ECCTOTAL];
 	u_char ecc_code[ECCTOTAL];
 	u_char oob_data[CONFIG_SYS_NAND_OOBSIZE];
 	int i;
 	int eccsize = CFG_SYS_NAND_ECCSIZE;
 	int eccbytes = CFG_SYS_NAND_ECCBYTES;
 	int eccsteps = ECCSTEPS;
 	uint8_t *p = dst;

 	nand_command(block, page, 0, NAND_CMD_READOOB);
 	this->read_buf(mtd, oob_data, CONFIG_SYS_NAND_OOBSIZE);
 	nand_command(block, page, 0, NAND_CMD_READ0);

 	/* Pick the ECC bytes out of the oob data */
 	for (i = 0; i < ECCTOTAL; i++)
 		ecc_code[i] = oob_data[nand_ecc_pos[i]];


 	for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
 		this->ecc.hwctl(mtd, NAND_ECC_READ);
 		this->read_buf(mtd, p, eccsize);
 		this->ecc.calculate(mtd, p, &ecc_calc[i]);
 		this->ecc.correct(mtd, p, &ecc_code[i], &ecc_calc[i]);
 	}

 	return 0;
 }
 #else
 static int nand_read_page(int block, int page, void *dst)
 {
 	struct nand_chip *this = mtd_to_nand(mtd);
 	u_char ecc_calc[ECCTOTAL];
 	u_char ecc_code[ECCTOTAL];
 	u_char oob_data[CONFIG_SYS_NAND_OOBSIZE];
 	int i;
 	int eccsize = CFG_SYS_NAND_ECCSIZE;
 	int eccbytes = CFG_SYS_NAND_ECCBYTES;
 	int eccsteps = ECCSTEPS;
 	uint8_t *p = dst;

 	nand_command(block, page, 0, NAND_CMD_READ0);

 	for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
 		if (this->ecc.mode != NAND_ECC_SOFT)
 			this->ecc.hwctl(mtd, NAND_ECC_READ);
 		this->read_buf(mtd, p, eccsize);
 		this->ecc.calculate(mtd, p, &ecc_calc[i]);
 	}
 	this->read_buf(mtd, oob_data, CONFIG_SYS_NAND_OOBSIZE);

 	/* Pick the ECC bytes out of the oob data */
 	for (i = 0; i < ECCTOTAL; i++)
 		ecc_code[i] = oob_data[nand_ecc_pos[i]];

 	eccsteps = ECCSTEPS;
 	p = dst;

 	for (i = 0 ; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
 		/* No chance to do something with the possible error message
 		 * from correct_data(). We just hope that all possible errors
 		 * are corrected by this routine.
 		 */
 		this->ecc.correct(mtd, p, &ecc_code[i], &ecc_calc[i]);
 	}

 	return 0;
 }
 #endif

 /* nand_init() - initialize data to make nand usable by SPL */
 void nand_init(void)
 {
 	/*
 	 * Init board specific nand support
 	 */
 	mtd = nand_to_mtd(&nand_chip);
 	nand_chip.IO_ADDR_R = nand_chip.IO_ADDR_W =
 		(void  __iomem *)CFG_SYS_NAND_BASE;
 	board_nand_init(&nand_chip);

 #ifdef CONFIG_SPL_NAND_SOFTECC
 	if (nand_chip.ecc.mode == NAND_ECC_SOFT) {
 		nand_chip.ecc.calculate = nand_calculate_ecc;
 		nand_chip.ecc.correct = nand_correct_data;
 	}
 #endif

 	if (nand_chip.select_chip)
 		nand_chip.select_chip(mtd, 0);
 }

 unsigned int nand_page_size(void)
 {
 	return nand_to_mtd(&nand_chip)->writesize;
 }

 /* Unselect after operation */
 void nand_deselect(void)
 {
 	if (nand_chip.select_chip)
 		nand_chip.select_chip(mtd, -1);
 }

 #include "nand_spl_loaders.c"
	// SPDX-License-Identifier: GPL-2.0+
	/*
	* (C) Copyright 2006-2008
	* Stefan Roese, DENX Software Engineering, sr@denx.de.
	*/

	#include <common.h>
	#include <nand.h>
	#include <system-constants.h>
	#include <asm/io.h>
	#include <linux/mtd/nand_ecc.h>
	#include <linux/mtd/rawnand.h>

	static int nand_ecc_pos[] = CFG_SYS_NAND_ECCPOS;
	static struct mtd_info *mtd;
	static struct nand_chip nand_chip;

	#define ECCSTEPS (CONFIG_SYS_NAND_PAGE_SIZE / \
	CFG_SYS_NAND_ECCSIZE)
	#define ECCTOTAL (ECCSTEPS * CFG_SYS_NAND_ECCBYTES)


	#if (CONFIG_SYS_NAND_PAGE_SIZE <= 512)
	/*
	* NAND command for small page NAND devices (512)
	*/
	static int nand_command(int block, int page, uint32_t offs,
	u8 cmd)
	{
	struct nand_chip *this = mtd_to_nand(mtd);
	int page_addr = page + block * SYS_NAND_BLOCK_PAGES;

	while (!this->dev_ready(mtd))
	;

	/* Begin command latch cycle */
	this->cmd_ctrl(mtd, cmd, NAND_CTRL_CLE \| NAND_CTRL_CHANGE);
	/* Set ALE and clear CLE to start address cycle */
	/* Column address */
	this->cmd_ctrl(mtd, offs, NAND_CTRL_ALE \| NAND_CTRL_CHANGE);
	this->cmd_ctrl(mtd, page_addr & 0xff, NAND_CTRL_ALE); /* A[16:9] */
	this->cmd_ctrl(mtd, (page_addr >> 8) & 0xff,
	NAND_CTRL_ALE); /* A[24:17] */
	/* Latch in address */
	this->cmd_ctrl(mtd, NAND_CMD_NONE, NAND_NCE \| NAND_CTRL_CHANGE);

	/*
	* Wait a while for the data to be ready
	*/
	while (!this->dev_ready(mtd))
	;

	return 0;
	}
	#else
	/*
	* NAND command for large page NAND devices (2k)
	*/
	static int nand_command(int block, int page, uint32_t offs,
	u8 cmd)
	{
	struct nand_chip *this = mtd_to_nand(mtd);
	int page_addr = page + block * SYS_NAND_BLOCK_PAGES;
	void (hwctrl)(struct mtd_info mtd, int cmd,
	unsigned int ctrl) = this->cmd_ctrl;

	while (!this->dev_ready(mtd))
	;

	/* Emulate NAND_CMD_READOOB */
	if (cmd == NAND_CMD_READOOB) {
	offs += CONFIG_SYS_NAND_PAGE_SIZE;
	cmd = NAND_CMD_READ0;
	}

	/* Shift the offset from byte addressing to word addressing. */
	if ((this->options & NAND_BUSWIDTH_16) && !nand_opcode_8bits(cmd))
	offs >>= 1;

	/* Begin command latch cycle */
	hwctrl(mtd, cmd, NAND_CTRL_CLE \| NAND_CTRL_CHANGE);
	/* Set ALE and clear CLE to start address cycle */
	/* Column address */
	hwctrl(mtd, offs & 0xff,
	NAND_CTRL_ALE \| NAND_CTRL_CHANGE); /* A[7:0] */
	hwctrl(mtd, (offs >> 8) & 0xff, NAND_CTRL_ALE); /* A[11:9] */
	/* Row address */
	hwctrl(mtd, (page_addr & 0xff), NAND_CTRL_ALE); /* A[19:12] */
	hwctrl(mtd, ((page_addr >> 8) & 0xff),
	NAND_CTRL_ALE); /* A[27:20] */
	#ifdef CONFIG_SYS_NAND_5_ADDR_CYCLE
	/* One more address cycle for devices > 128MiB */
	hwctrl(mtd, (page_addr >> 16) & 0x0f,
	NAND_CTRL_ALE); /* A[31:28] */
	#endif
	/* Latch in address */
	hwctrl(mtd, NAND_CMD_READSTART,
	NAND_CTRL_CLE \| NAND_CTRL_CHANGE);
	hwctrl(mtd, NAND_CMD_NONE, NAND_NCE \| NAND_CTRL_CHANGE);

	/*
	* Wait a while for the data to be ready
	*/
	while (!this->dev_ready(mtd))
	;

	return 0;
	}
	#endif

	static int nand_is_bad_block(int block)
	{
	struct nand_chip *this = mtd_to_nand(mtd);
	u_char bb_data[2];

	nand_command(block, 0, CONFIG_SYS_NAND_BAD_BLOCK_POS,
	NAND_CMD_READOOB);

	/*
	* Read one byte (or two if it's a 16 bit chip).
	*/
	if (this->options & NAND_BUSWIDTH_16) {
	this->read_buf(mtd, bb_data, 2);
	if (bb_data[0] != 0xff \|\| bb_data[1] != 0xff)
	return 1;
	} else {
	this->read_buf(mtd, bb_data, 1);
	if (bb_data[0] != 0xff)
	return 1;
	}

	return 0;
	}

	#if defined(CONFIG_SYS_NAND_HW_ECC_OOBFIRST)
	static int nand_read_page(int block, int page, uchar *dst)
	{
	struct nand_chip *this = mtd_to_nand(mtd);
	u_char ecc_calc[ECCTOTAL];
	u_char ecc_code[ECCTOTAL];
	u_char oob_data[CONFIG_SYS_NAND_OOBSIZE];
	int i;
	int eccsize = CFG_SYS_NAND_ECCSIZE;
	int eccbytes = CFG_SYS_NAND_ECCBYTES;
	int eccsteps = ECCSTEPS;
	uint8_t *p = dst;

	nand_command(block, page, 0, NAND_CMD_READOOB);
	this->read_buf(mtd, oob_data, CONFIG_SYS_NAND_OOBSIZE);
	nand_command(block, page, 0, NAND_CMD_READ0);

	/* Pick the ECC bytes out of the oob data */
	for (i = 0; i < ECCTOTAL; i++)
	ecc_code[i] = oob_data[nand_ecc_pos[i]];


	for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
	this->ecc.hwctl(mtd, NAND_ECC_READ);
	this->read_buf(mtd, p, eccsize);
	this->ecc.calculate(mtd, p, &ecc_calc[i]);
	this->ecc.correct(mtd, p, &ecc_code[i], &ecc_calc[i]);
	}

	return 0;
	}
	#else
	static int nand_read_page(int block, int page, void *dst)
	{
	struct nand_chip *this = mtd_to_nand(mtd);
	u_char ecc_calc[ECCTOTAL];
	u_char ecc_code[ECCTOTAL];
	u_char oob_data[CONFIG_SYS_NAND_OOBSIZE];
	int i;
	int eccsize = CFG_SYS_NAND_ECCSIZE;
	int eccbytes = CFG_SYS_NAND_ECCBYTES;
	int eccsteps = ECCSTEPS;
	uint8_t *p = dst;

	nand_command(block, page, 0, NAND_CMD_READ0);

	for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
	if (this->ecc.mode != NAND_ECC_SOFT)
	this->ecc.hwctl(mtd, NAND_ECC_READ);
	this->read_buf(mtd, p, eccsize);
	this->ecc.calculate(mtd, p, &ecc_calc[i]);
	}
	this->read_buf(mtd, oob_data, CONFIG_SYS_NAND_OOBSIZE);

	/* Pick the ECC bytes out of the oob data */
	for (i = 0; i < ECCTOTAL; i++)
	ecc_code[i] = oob_data[nand_ecc_pos[i]];

	eccsteps = ECCSTEPS;
	p = dst;

	for (i = 0 ; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
	/* No chance to do something with the possible error message
	* from correct_data(). We just hope that all possible errors
	* are corrected by this routine.
	*/
	this->ecc.correct(mtd, p, &ecc_code[i], &ecc_calc[i]);
	}

	return 0;
	}
	#endif

	/* nand_init() - initialize data to make nand usable by SPL */
	void nand_init(void)
	{
	/*
	* Init board specific nand support
	*/
	mtd = nand_to_mtd(&nand_chip);
	nand_chip.IO_ADDR_R = nand_chip.IO_ADDR_W =
	(void __iomem *)CFG_SYS_NAND_BASE;
	board_nand_init(&nand_chip);

	#ifdef CONFIG_SPL_NAND_SOFTECC
	if (nand_chip.ecc.mode == NAND_ECC_SOFT) {
	nand_chip.ecc.calculate = nand_calculate_ecc;
	nand_chip.ecc.correct = nand_correct_data;
	}
	#endif

	if (nand_chip.select_chip)
	nand_chip.select_chip(mtd, 0);
	}

	unsigned int nand_page_size(void)
	{
	return nand_to_mtd(&nand_chip)->writesize;
	}

	/* Unselect after operation */
	void nand_deselect(void)
	{
	if (nand_chip.select_chip)
	nand_chip.select_chip(mtd, -1);
	}

	#include "nand_spl_loaders.c"