| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2019 Disruptive Technologies Research AS |
| * Sven Schwermer <sven.svenschwermer@disruptive-technologies.com> |
| */ |
| |
| #include "regulator_common.h" |
| #include <common.h> |
| #include <power/regulator.h> |
| |
| int regulator_common_ofdata_to_platdata(struct udevice *dev, |
| struct regulator_common_platdata *dev_pdata, const char *enable_gpio_name) |
| { |
| struct gpio_desc *gpio; |
| struct dm_regulator_uclass_platdata *uc_pdata; |
| int flags = GPIOD_IS_OUT; |
| int ret; |
| |
| uc_pdata = dev_get_uclass_platdata(dev); |
| |
| if (!dev_read_bool(dev, "enable-active-high")) |
| flags |= GPIOD_ACTIVE_LOW; |
| if (uc_pdata->boot_on) |
| flags |= GPIOD_IS_OUT_ACTIVE; |
| |
| /* Get optional enable GPIO desc */ |
| gpio = &dev_pdata->gpio; |
| ret = gpio_request_by_name(dev, enable_gpio_name, 0, gpio, flags); |
| if (ret) { |
| debug("Regulator '%s' optional enable GPIO - not found! Error: %d\n", |
| dev->name, ret); |
| if (ret != -ENOENT) |
| return ret; |
| } |
| |
| /* Get optional ramp up delay */ |
| dev_pdata->startup_delay_us = dev_read_u32_default(dev, |
| "startup-delay-us", 0); |
| dev_pdata->off_on_delay_us = |
| dev_read_u32_default(dev, "u-boot,off-on-delay-us", 0); |
| |
| return 0; |
| } |
| |
| int regulator_common_get_enable(const struct udevice *dev, |
| struct regulator_common_platdata *dev_pdata) |
| { |
| /* Enable GPIO is optional */ |
| if (!dev_pdata->gpio.dev) |
| return true; |
| |
| return dm_gpio_get_value(&dev_pdata->gpio); |
| } |
| |
| int regulator_common_set_enable(const struct udevice *dev, |
| struct regulator_common_platdata *dev_pdata, bool enable) |
| { |
| int ret; |
| |
| debug("%s: dev='%s', enable=%d, delay=%d, has_gpio=%d\n", __func__, |
| dev->name, enable, dev_pdata->startup_delay_us, |
| dm_gpio_is_valid(&dev_pdata->gpio)); |
| /* Enable GPIO is optional */ |
| if (!dm_gpio_is_valid(&dev_pdata->gpio)) { |
| if (!enable) |
| return -ENOSYS; |
| return 0; |
| } |
| |
| ret = dm_gpio_set_value(&dev_pdata->gpio, enable); |
| if (ret) { |
| pr_err("Can't set regulator : %s gpio to: %d\n", dev->name, |
| enable); |
| return ret; |
| } |
| |
| if (enable && dev_pdata->startup_delay_us) |
| udelay(dev_pdata->startup_delay_us); |
| debug("%s: done\n", __func__); |
| |
| if (!enable && dev_pdata->off_on_delay_us) |
| udelay(dev_pdata->off_on_delay_us); |
| |
| return 0; |
| } |