| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (c) 2011 The Chromium OS Authors. |
| * (C) Copyright 2010,2011 |
| * Graeme Russ, <graeme.russ@gmail.com> |
| * |
| * Portions from Coreboot mainboard/google/link/romstage.c |
| * Copyright (C) 2007-2010 coresystems GmbH |
| * Copyright (C) 2011 Google Inc. |
| */ |
| |
| #include <common.h> |
| #include <errno.h> |
| #include <fdtdec.h> |
| #include <init.h> |
| #include <malloc.h> |
| #include <net.h> |
| #include <rtc.h> |
| #include <spi.h> |
| #include <spi_flash.h> |
| #include <syscon.h> |
| #include <sysreset.h> |
| #include <asm/cpu.h> |
| #include <asm/processor.h> |
| #include <asm/gpio.h> |
| #include <asm/global_data.h> |
| #include <asm/intel_regs.h> |
| #include <asm/mrccache.h> |
| #include <asm/mrc_common.h> |
| #include <asm/mtrr.h> |
| #include <asm/pci.h> |
| #include <asm/report_platform.h> |
| #include <asm/arch/me.h> |
| #include <asm/arch/pei_data.h> |
| #include <asm/arch/pch.h> |
| #include <asm/post.h> |
| #include <asm/arch/sandybridge.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| #define CMOS_OFFSET_MRC_SEED 152 |
| #define CMOS_OFFSET_MRC_SEED_S3 156 |
| #define CMOS_OFFSET_MRC_SEED_CHK 160 |
| |
| ulong board_get_usable_ram_top(ulong total_size) |
| { |
| return mrc_common_board_get_usable_ram_top(total_size); |
| } |
| |
| int dram_init_banksize(void) |
| { |
| mrc_common_dram_init_banksize(); |
| |
| return 0; |
| } |
| |
| static int read_seed_from_cmos(struct pei_data *pei_data) |
| { |
| u16 c1, c2, checksum, seed_checksum; |
| struct udevice *dev; |
| int ret = 0; |
| |
| ret = uclass_get_device(UCLASS_RTC, 0, &dev); |
| if (ret) { |
| debug("Cannot find RTC: err=%d\n", ret); |
| return -ENODEV; |
| } |
| |
| /* |
| * Read scrambler seeds from CMOS RAM. We don't want to store them in |
| * SPI flash since they change on every boot and that would wear down |
| * the flash too much. So we store these in CMOS and the large MRC |
| * data in SPI flash. |
| */ |
| ret = rtc_read32(dev, CMOS_OFFSET_MRC_SEED, &pei_data->scrambler_seed); |
| if (!ret) { |
| ret = rtc_read32(dev, CMOS_OFFSET_MRC_SEED_S3, |
| &pei_data->scrambler_seed_s3); |
| } |
| if (ret) { |
| debug("Failed to read from RTC %s\n", dev->name); |
| return ret; |
| } |
| |
| debug("Read scrambler seed 0x%08x from CMOS 0x%02x\n", |
| pei_data->scrambler_seed, CMOS_OFFSET_MRC_SEED); |
| debug("Read S3 scrambler seed 0x%08x from CMOS 0x%02x\n", |
| pei_data->scrambler_seed_s3, CMOS_OFFSET_MRC_SEED_S3); |
| |
| /* Compute seed checksum and compare */ |
| c1 = compute_ip_checksum((u8 *)&pei_data->scrambler_seed, |
| sizeof(u32)); |
| c2 = compute_ip_checksum((u8 *)&pei_data->scrambler_seed_s3, |
| sizeof(u32)); |
| checksum = add_ip_checksums(sizeof(u32), c1, c2); |
| |
| seed_checksum = rtc_read8(dev, CMOS_OFFSET_MRC_SEED_CHK); |
| seed_checksum |= rtc_read8(dev, CMOS_OFFSET_MRC_SEED_CHK + 1) << 8; |
| |
| if (checksum != seed_checksum) { |
| debug("%s: invalid seed checksum\n", __func__); |
| pei_data->scrambler_seed = 0; |
| pei_data->scrambler_seed_s3 = 0; |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int prepare_mrc_cache(struct pei_data *pei_data) |
| { |
| struct mrc_data_container *mrc_cache; |
| struct mrc_region entry; |
| int ret; |
| |
| ret = read_seed_from_cmos(pei_data); |
| if (ret) |
| return ret; |
| ret = mrccache_get_region(NULL, &entry); |
| if (ret) |
| return ret; |
| mrc_cache = mrccache_find_current(&entry); |
| if (!mrc_cache) |
| return -ENOENT; |
| |
| pei_data->mrc_input = mrc_cache->data; |
| pei_data->mrc_input_len = mrc_cache->data_size; |
| debug("%s: at %p, size %x checksum %04x\n", __func__, |
| pei_data->mrc_input, pei_data->mrc_input_len, |
| mrc_cache->checksum); |
| |
| return 0; |
| } |
| |
| static int write_seeds_to_cmos(struct pei_data *pei_data) |
| { |
| u16 c1, c2, checksum; |
| struct udevice *dev; |
| int ret = 0; |
| |
| ret = uclass_get_device(UCLASS_RTC, 0, &dev); |
| if (ret) { |
| debug("Cannot find RTC: err=%d\n", ret); |
| return -ENODEV; |
| } |
| |
| /* Save the MRC seed values to CMOS */ |
| rtc_write32(dev, CMOS_OFFSET_MRC_SEED, pei_data->scrambler_seed); |
| debug("Save scrambler seed 0x%08x to CMOS 0x%02x\n", |
| pei_data->scrambler_seed, CMOS_OFFSET_MRC_SEED); |
| |
| rtc_write32(dev, CMOS_OFFSET_MRC_SEED_S3, pei_data->scrambler_seed_s3); |
| debug("Save s3 scrambler seed 0x%08x to CMOS 0x%02x\n", |
| pei_data->scrambler_seed_s3, CMOS_OFFSET_MRC_SEED_S3); |
| |
| /* Save a simple checksum of the seed values */ |
| c1 = compute_ip_checksum((u8 *)&pei_data->scrambler_seed, |
| sizeof(u32)); |
| c2 = compute_ip_checksum((u8 *)&pei_data->scrambler_seed_s3, |
| sizeof(u32)); |
| checksum = add_ip_checksums(sizeof(u32), c1, c2); |
| |
| rtc_write8(dev, CMOS_OFFSET_MRC_SEED_CHK, checksum & 0xff); |
| rtc_write8(dev, CMOS_OFFSET_MRC_SEED_CHK + 1, (checksum >> 8) & 0xff); |
| |
| return 0; |
| } |
| |
| /* Use this hook to save our SDRAM parameters */ |
| int misc_init_r(void) |
| { |
| int ret; |
| |
| ret = mrccache_save(); |
| if (ret) |
| printf("Unable to save MRC data: %d\n", ret); |
| |
| return 0; |
| } |
| |
| static void post_system_agent_init(struct udevice *dev, struct udevice *me_dev, |
| struct pei_data *pei_data) |
| { |
| uint16_t done; |
| |
| /* |
| * Send ME init done for SandyBridge here. This is done inside the |
| * SystemAgent binary on IvyBridge |
| */ |
| dm_pci_read_config16(dev, PCI_DEVICE_ID, &done); |
| done &= BASE_REV_MASK; |
| if (BASE_REV_SNB == done) |
| intel_early_me_init_done(dev, me_dev, ME_INIT_STATUS_SUCCESS); |
| else |
| intel_me_status(me_dev); |
| |
| /* If PCIe init is skipped, set the PEG clock gating */ |
| if (!pei_data->pcie_init) |
| setbits_le32(MCHBAR_REG(0x7010), 1); |
| } |
| |
| static int recovery_mode_enabled(void) |
| { |
| return false; |
| } |
| |
| static int copy_spd(struct udevice *dev, struct pei_data *peid) |
| { |
| const void *data; |
| int ret; |
| |
| ret = mrc_locate_spd(dev, sizeof(peid->spd_data[0]), &data); |
| if (ret) { |
| debug("%s: Could not locate SPD (ret=%d)\n", __func__, ret); |
| return ret; |
| } |
| |
| memcpy(peid->spd_data[0], data, sizeof(peid->spd_data[0])); |
| |
| return 0; |
| } |
| |
| /** |
| * sdram_find() - Find available memory |
| * |
| * This is a bit complicated since on x86 there are system memory holes all |
| * over the place. We create a list of available memory blocks |
| * |
| * @dev: Northbridge device |
| */ |
| static int sdram_find(struct udevice *dev) |
| { |
| struct memory_info *info = &gd->arch.meminfo; |
| uint32_t tseg_base, uma_size, tolud; |
| uint64_t tom, me_base, touud; |
| uint64_t uma_memory_base = 0; |
| unsigned long long tomk; |
| uint16_t ggc; |
| u32 val; |
| |
| /* Total Memory 2GB example: |
| * |
| * 00000000 0000MB-1992MB 1992MB RAM (writeback) |
| * 7c800000 1992MB-2000MB 8MB TSEG (SMRR) |
| * 7d000000 2000MB-2002MB 2MB GFX GTT (uncached) |
| * 7d200000 2002MB-2034MB 32MB GFX UMA (uncached) |
| * 7f200000 2034MB TOLUD |
| * 7f800000 2040MB MEBASE |
| * 7f800000 2040MB-2048MB 8MB ME UMA (uncached) |
| * 80000000 2048MB TOM |
| * 100000000 4096MB-4102MB 6MB RAM (writeback) |
| * |
| * Total Memory 4GB example: |
| * |
| * 00000000 0000MB-2768MB 2768MB RAM (writeback) |
| * ad000000 2768MB-2776MB 8MB TSEG (SMRR) |
| * ad800000 2776MB-2778MB 2MB GFX GTT (uncached) |
| * ada00000 2778MB-2810MB 32MB GFX UMA (uncached) |
| * afa00000 2810MB TOLUD |
| * ff800000 4088MB MEBASE |
| * ff800000 4088MB-4096MB 8MB ME UMA (uncached) |
| * 100000000 4096MB TOM |
| * 100000000 4096MB-5374MB 1278MB RAM (writeback) |
| * 14fe00000 5368MB TOUUD |
| */ |
| |
| /* Top of Upper Usable DRAM, including remap */ |
| dm_pci_read_config32(dev, TOUUD + 4, &val); |
| touud = (uint64_t)val << 32; |
| dm_pci_read_config32(dev, TOUUD, &val); |
| touud |= val; |
| |
| /* Top of Lower Usable DRAM */ |
| dm_pci_read_config32(dev, TOLUD, &tolud); |
| |
| /* Top of Memory - does not account for any UMA */ |
| dm_pci_read_config32(dev, 0xa4, &val); |
| tom = (uint64_t)val << 32; |
| dm_pci_read_config32(dev, 0xa0, &val); |
| tom |= val; |
| |
| debug("TOUUD %llx TOLUD %08x TOM %llx\n", touud, tolud, tom); |
| |
| /* ME UMA needs excluding if total memory <4GB */ |
| dm_pci_read_config32(dev, 0x74, &val); |
| me_base = (uint64_t)val << 32; |
| dm_pci_read_config32(dev, 0x70, &val); |
| me_base |= val; |
| |
| debug("MEBASE %llx\n", me_base); |
| |
| /* TODO: Get rid of all this shifting by 10 bits */ |
| tomk = tolud >> 10; |
| if (me_base == tolud) { |
| /* ME is from MEBASE-TOM */ |
| uma_size = (tom - me_base) >> 10; |
| /* Increment TOLUD to account for ME as RAM */ |
| tolud += uma_size << 10; |
| /* UMA starts at old TOLUD */ |
| uma_memory_base = tomk * 1024ULL; |
| debug("ME UMA base %llx size %uM\n", me_base, uma_size >> 10); |
| } |
| |
| /* Graphics memory comes next */ |
| dm_pci_read_config16(dev, GGC, &ggc); |
| if (!(ggc & 2)) { |
| debug("IGD decoded, subtracting "); |
| |
| /* Graphics memory */ |
| uma_size = ((ggc >> 3) & 0x1f) * 32 * 1024ULL; |
| debug("%uM UMA", uma_size >> 10); |
| tomk -= uma_size; |
| uma_memory_base = tomk * 1024ULL; |
| |
| /* GTT Graphics Stolen Memory Size (GGMS) */ |
| uma_size = ((ggc >> 8) & 0x3) * 1024ULL; |
| tomk -= uma_size; |
| uma_memory_base = tomk * 1024ULL; |
| debug(" and %uM GTT\n", uma_size >> 10); |
| } |
| |
| /* Calculate TSEG size from its base which must be below GTT */ |
| dm_pci_read_config32(dev, 0xb8, &tseg_base); |
| uma_size = (uma_memory_base - tseg_base) >> 10; |
| tomk -= uma_size; |
| uma_memory_base = tomk * 1024ULL; |
| debug("TSEG base 0x%08x size %uM\n", tseg_base, uma_size >> 10); |
| |
| debug("Available memory below 4GB: %lluM\n", tomk >> 10); |
| |
| /* Report the memory regions */ |
| mrc_add_memory_area(info, 1 << 20, 2 << 28); |
| mrc_add_memory_area(info, (2 << 28) + (2 << 20), 4 << 28); |
| mrc_add_memory_area(info, (4 << 28) + (2 << 20), tseg_base); |
| mrc_add_memory_area(info, 1ULL << 32, touud); |
| |
| /* Add MTRRs for memory */ |
| mtrr_add_request(MTRR_TYPE_WRBACK, 0, 2ULL << 30); |
| mtrr_add_request(MTRR_TYPE_WRBACK, 2ULL << 30, 512 << 20); |
| mtrr_add_request(MTRR_TYPE_WRBACK, 0xaULL << 28, 256 << 20); |
| mtrr_add_request(MTRR_TYPE_UNCACHEABLE, tseg_base, 16 << 20); |
| mtrr_add_request(MTRR_TYPE_UNCACHEABLE, tseg_base + (16 << 20), |
| 32 << 20); |
| |
| /* |
| * If >= 4GB installed then memory from TOLUD to 4GB |
| * is remapped above TOM, TOUUD will account for both |
| */ |
| if (touud > (1ULL << 32ULL)) { |
| debug("Available memory above 4GB: %lluM\n", |
| (touud >> 20) - 4096); |
| } |
| |
| return 0; |
| } |
| |
| static void rcba_config(void) |
| { |
| /* |
| * GFX INTA -> PIRQA (MSI) |
| * D28IP_P3IP WLAN INTA -> PIRQB |
| * D29IP_E1P EHCI1 INTA -> PIRQD |
| * D26IP_E2P EHCI2 INTA -> PIRQF |
| * D31IP_SIP SATA INTA -> PIRQF (MSI) |
| * D31IP_SMIP SMBUS INTB -> PIRQH |
| * D31IP_TTIP THRT INTC -> PIRQA |
| * D27IP_ZIP HDA INTA -> PIRQA (MSI) |
| * |
| * TRACKPAD -> PIRQE (Edge Triggered) |
| * TOUCHSCREEN -> PIRQG (Edge Triggered) |
| */ |
| |
| /* Device interrupt pin register (board specific) */ |
| writel((INTC << D31IP_TTIP) | (NOINT << D31IP_SIP2) | |
| (INTB << D31IP_SMIP) | (INTA << D31IP_SIP), RCB_REG(D31IP)); |
| writel(NOINT << D30IP_PIP, RCB_REG(D30IP)); |
| writel(INTA << D29IP_E1P, RCB_REG(D29IP)); |
| writel(INTA << D28IP_P3IP, RCB_REG(D28IP)); |
| writel(INTA << D27IP_ZIP, RCB_REG(D27IP)); |
| writel(INTA << D26IP_E2P, RCB_REG(D26IP)); |
| writel(NOINT << D25IP_LIP, RCB_REG(D25IP)); |
| writel(NOINT << D22IP_MEI1IP, RCB_REG(D22IP)); |
| |
| /* Device interrupt route registers */ |
| writel(DIR_ROUTE(PIRQB, PIRQH, PIRQA, PIRQC), RCB_REG(D31IR)); |
| writel(DIR_ROUTE(PIRQD, PIRQE, PIRQF, PIRQG), RCB_REG(D29IR)); |
| writel(DIR_ROUTE(PIRQB, PIRQC, PIRQD, PIRQE), RCB_REG(D28IR)); |
| writel(DIR_ROUTE(PIRQA, PIRQH, PIRQA, PIRQB), RCB_REG(D27IR)); |
| writel(DIR_ROUTE(PIRQF, PIRQE, PIRQG, PIRQH), RCB_REG(D26IR)); |
| writel(DIR_ROUTE(PIRQA, PIRQB, PIRQC, PIRQD), RCB_REG(D25IR)); |
| writel(DIR_ROUTE(PIRQA, PIRQB, PIRQC, PIRQD), RCB_REG(D22IR)); |
| |
| /* Enable IOAPIC (generic) */ |
| writew(0x0100, RCB_REG(OIC)); |
| /* PCH BWG says to read back the IOAPIC enable register */ |
| (void)readw(RCB_REG(OIC)); |
| |
| /* Disable unused devices (board specific) */ |
| setbits_le32(RCB_REG(FD), PCH_DISABLE_ALWAYS); |
| } |
| |
| int dram_init(void) |
| { |
| struct pei_data _pei_data __aligned(8) = { |
| .pei_version = PEI_VERSION, |
| .mchbar = MCH_BASE_ADDRESS, |
| .dmibar = DEFAULT_DMIBAR, |
| .epbar = DEFAULT_EPBAR, |
| .pciexbar = CONFIG_PCIE_ECAM_BASE, |
| .smbusbar = SMBUS_IO_BASE, |
| .wdbbar = 0x4000000, |
| .wdbsize = 0x1000, |
| .hpet_address = CONFIG_HPET_ADDRESS, |
| .rcba = DEFAULT_RCBABASE, |
| .pmbase = DEFAULT_PMBASE, |
| .gpiobase = DEFAULT_GPIOBASE, |
| .thermalbase = 0xfed08000, |
| .system_type = 0, /* 0 Mobile, 1 Desktop/Server */ |
| .tseg_size = CONFIG_SMM_TSEG_SIZE, |
| .ts_addresses = { 0x00, 0x00, 0x00, 0x00 }, |
| .ec_present = 1, |
| .ddr3lv_support = 1, |
| /* |
| * 0 = leave channel enabled |
| * 1 = disable dimm 0 on channel |
| * 2 = disable dimm 1 on channel |
| * 3 = disable dimm 0+1 on channel |
| */ |
| .dimm_channel0_disabled = 2, |
| .dimm_channel1_disabled = 2, |
| .max_ddr3_freq = 1600, |
| .usb_port_config = { |
| /* |
| * Empty and onboard Ports 0-7, set to un-used pin |
| * OC3 |
| */ |
| { 0, 3, 0x0000 }, /* P0= Empty */ |
| { 1, 0, 0x0040 }, /* P1= Left USB 1 (OC0) */ |
| { 1, 1, 0x0040 }, /* P2= Left USB 2 (OC1) */ |
| { 1, 3, 0x0040 }, /* P3= SDCARD (no OC) */ |
| { 0, 3, 0x0000 }, /* P4= Empty */ |
| { 1, 3, 0x0040 }, /* P5= WWAN (no OC) */ |
| { 0, 3, 0x0000 }, /* P6= Empty */ |
| { 0, 3, 0x0000 }, /* P7= Empty */ |
| /* |
| * Empty and onboard Ports 8-13, set to un-used pin |
| * OC4 |
| */ |
| { 1, 4, 0x0040 }, /* P8= Camera (no OC) */ |
| { 1, 4, 0x0040 }, /* P9= Bluetooth (no OC) */ |
| { 0, 4, 0x0000 }, /* P10= Empty */ |
| { 0, 4, 0x0000 }, /* P11= Empty */ |
| { 0, 4, 0x0000 }, /* P12= Empty */ |
| { 0, 4, 0x0000 }, /* P13= Empty */ |
| }, |
| }; |
| struct pei_data *pei_data = &_pei_data; |
| struct udevice *dev, *me_dev; |
| int ret; |
| |
| /* We need the pinctrl set up early */ |
| ret = syscon_get_by_driver_data(X86_SYSCON_PINCONF, &dev); |
| if (ret) { |
| debug("%s: Could not get pinconf (ret=%d)\n", __func__, ret); |
| return ret; |
| } |
| |
| ret = uclass_first_device_err(UCLASS_NORTHBRIDGE, &dev); |
| if (ret) { |
| debug("%s: Could not get northbridge (ret=%d)\n", __func__, |
| ret); |
| return ret; |
| } |
| ret = syscon_get_by_driver_data(X86_SYSCON_ME, &me_dev); |
| if (ret) { |
| debug("%s: Could not get ME (ret=%d)\n", __func__, ret); |
| return ret; |
| } |
| ret = copy_spd(dev, pei_data); |
| if (ret) { |
| debug("%s: Could not get SPD (ret=%d)\n", __func__, ret); |
| return ret; |
| } |
| pei_data->boot_mode = gd->arch.pei_boot_mode; |
| debug("Boot mode %d\n", gd->arch.pei_boot_mode); |
| debug("mrc_input %p\n", pei_data->mrc_input); |
| |
| /* |
| * Do not pass MRC data in for recovery mode boot, |
| * Always pass it in for S3 resume. |
| */ |
| if (!recovery_mode_enabled() || |
| pei_data->boot_mode == PEI_BOOT_RESUME) { |
| ret = prepare_mrc_cache(pei_data); |
| if (ret) |
| debug("prepare_mrc_cache failed: %d\n", ret); |
| } |
| |
| /* If MRC data is not found we cannot continue S3 resume. */ |
| if (pei_data->boot_mode == PEI_BOOT_RESUME && !pei_data->mrc_input) { |
| debug("Giving up in sdram_initialize: No MRC data\n"); |
| sysreset_walk_halt(SYSRESET_COLD); |
| } |
| |
| /* Pass console handler in pei_data */ |
| pei_data->tx_byte = sdram_console_tx_byte; |
| |
| /* Wait for ME to be ready */ |
| ret = intel_early_me_init(me_dev); |
| if (ret) { |
| debug("%s: Could not init ME (ret=%d)\n", __func__, ret); |
| return ret; |
| } |
| ret = intel_early_me_uma_size(me_dev); |
| if (ret < 0) { |
| debug("%s: Could not get UMA size (ret=%d)\n", __func__, ret); |
| return ret; |
| } |
| |
| ret = mrc_common_init(dev, pei_data, false); |
| if (ret) { |
| debug("%s: mrc_common_init() failed (ret=%d)\n", __func__, ret); |
| return ret; |
| } |
| |
| ret = sdram_find(dev); |
| if (ret) { |
| debug("%s: sdram_find() failed (ret=%d)\n", __func__, ret); |
| return ret; |
| } |
| gd->ram_size = gd->arch.meminfo.total_32bit_memory; |
| |
| debug("MRC output data length %#x at %p\n", pei_data->mrc_output_len, |
| pei_data->mrc_output); |
| |
| post_system_agent_init(dev, me_dev, pei_data); |
| report_memory_config(); |
| |
| /* S3 resume: don't save scrambler seed or MRC data */ |
| if (pei_data->boot_mode != PEI_BOOT_RESUME) { |
| /* |
| * This will be copied to SDRAM in reserve_arch(), then written |
| * to SPI flash in mrccache_save() |
| */ |
| gd->arch.mrc_output = (char *)pei_data->mrc_output; |
| gd->arch.mrc_output_len = pei_data->mrc_output_len; |
| ret = write_seeds_to_cmos(pei_data); |
| if (ret) |
| debug("Failed to write seeds to CMOS: %d\n", ret); |
| } |
| |
| writew(0xCAFE, MCHBAR_REG(SSKPD)); |
| if (ret) |
| return ret; |
| |
| rcba_config(); |
| |
| return 0; |
| } |