| /* |
| * (C) Copyright 2001-2003 |
| * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include <common.h> |
| #include <asm/processor.h> |
| #include <command.h> |
| #include <cmd_boot.h> |
| #include <malloc.h> |
| |
| /* ------------------------------------------------------------------------- */ |
| |
| #if 0 |
| #define FPGA_DEBUG |
| #endif |
| |
| /* fpga configuration data - generated by bin2cc */ |
| const unsigned char fpgadata[] = |
| { |
| #ifdef CONFIG_CPCI405_VER2 |
| # include "fpgadata_cpci4052.c" |
| #else |
| # include "fpgadata_cpci405.c" |
| #endif |
| }; |
| |
| /* |
| * include common fpga code (for esd boards) |
| */ |
| #include "../common/fpga.c" |
| |
| |
| /* Prototypes */ |
| int cpci405_version(void); |
| int gunzip(void *, int, unsigned char *, int *); |
| |
| |
| int board_pre_init (void) |
| { |
| #ifndef CONFIG_CPCI405_VER2 |
| int index, len, i; |
| int status; |
| #endif |
| |
| #ifdef FPGA_DEBUG |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| /* set up serial port with default baudrate */ |
| (void) get_clocks (); |
| gd->baudrate = CONFIG_BAUDRATE; |
| serial_init (); |
| console_init_f(); |
| #endif |
| |
| /* |
| * First pull fpga-prg pin low, to disable fpga logic (on version 2 board) |
| */ |
| out32(IBM405GP_GPIO0_ODR, 0x00000000); /* no open drain pins */ |
| out32(IBM405GP_GPIO0_TCR, CFG_FPGA_PRG); /* setup for output */ |
| out32(IBM405GP_GPIO0_OR, CFG_FPGA_PRG); /* set output pins to high */ |
| out32(IBM405GP_GPIO0_OR, 0); /* pull prg low */ |
| |
| /* |
| * Boot onboard FPGA |
| */ |
| #ifndef CONFIG_CPCI405_VER2 |
| if (cpci405_version() == 1) { |
| status = fpga_boot((unsigned char *)fpgadata, sizeof(fpgadata)); |
| if (status != 0) { |
| /* booting FPGA failed */ |
| #ifndef FPGA_DEBUG |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| /* set up serial port with default baudrate */ |
| (void) get_clocks (); |
| gd->baudrate = CONFIG_BAUDRATE; |
| serial_init (); |
| console_init_f(); |
| #endif |
| printf("\nFPGA: Booting failed "); |
| switch (status) { |
| case ERROR_FPGA_PRG_INIT_LOW: |
| printf("(Timeout: INIT not low after asserting PROGRAM*)\n "); |
| break; |
| case ERROR_FPGA_PRG_INIT_HIGH: |
| printf("(Timeout: INIT not high after deasserting PROGRAM*)\n "); |
| break; |
| case ERROR_FPGA_PRG_DONE: |
| printf("(Timeout: DONE not high after programming FPGA)\n "); |
| break; |
| } |
| |
| /* display infos on fpgaimage */ |
| index = 15; |
| for (i=0; i<4; i++) { |
| len = fpgadata[index]; |
| printf("FPGA: %s\n", &(fpgadata[index+1])); |
| index += len+3; |
| } |
| putc ('\n'); |
| /* delayed reboot */ |
| for (i=20; i>0; i--) { |
| printf("Rebooting in %2d seconds \r",i); |
| for (index=0;index<1000;index++) |
| udelay(1000); |
| } |
| putc ('\n'); |
| do_reset(NULL, 0, 0, NULL); |
| } |
| } |
| #endif /* !CONFIG_CPCI405_VER2 */ |
| |
| /* |
| * IRQ 0-15 405GP internally generated; active high; level sensitive |
| * IRQ 16 405GP internally generated; active low; level sensitive |
| * IRQ 17-24 RESERVED |
| * IRQ 25 (EXT IRQ 0) CAN0; active low; level sensitive |
| * IRQ 26 (EXT IRQ 1) CAN1 (+FPGA on CPCI4052) ; active low; level sensitive |
| * IRQ 27 (EXT IRQ 2) PCI SLOT 0; active low; level sensitive |
| * IRQ 28 (EXT IRQ 3) PCI SLOT 1; active low; level sensitive |
| * IRQ 29 (EXT IRQ 4) PCI SLOT 2; active low; level sensitive |
| * IRQ 30 (EXT IRQ 5) PCI SLOT 3; active low; level sensitive |
| * IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive |
| */ |
| mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ |
| mtdcr(uicer, 0x00000000); /* disable all ints */ |
| mtdcr(uiccr, 0x00000000); /* set all to be non-critical*/ |
| if (cpci405_version() == 3) { |
| mtdcr(uicpr, 0xFFFFFF99); /* set int polarities */ |
| } else { |
| mtdcr(uicpr, 0xFFFFFF81); /* set int polarities */ |
| } |
| mtdcr(uictr, 0x10000000); /* set int trigger levels */ |
| mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority*/ |
| mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ |
| |
| return 0; |
| } |
| |
| |
| /* ------------------------------------------------------------------------- */ |
| |
| int ctermm2(void) |
| { |
| #ifdef CONFIG_CPCI405_VER2 |
| return 0; /* no, board is cpci405 */ |
| #else |
| if ((*(unsigned char *)0xf0000400 == 0x00) && |
| (*(unsigned char *)0xf0000401 == 0x01)) |
| return 0; /* no, board is cpci405 */ |
| else |
| return -1; /* yes, board is cterm-m2 */ |
| #endif |
| } |
| |
| |
| int cpci405_host(void) |
| { |
| if (mfdcr(strap) & PSR_PCI_ARBIT_EN) |
| return -1; /* yes, board is cpci405 host */ |
| else |
| return 0; /* no, board is cpci405 adapter */ |
| } |
| |
| |
| int cpci405_version(void) |
| { |
| unsigned long cntrl0Reg; |
| unsigned long value; |
| |
| /* |
| * Setup GPIO pins (CS2/GPIO11 and CS3/GPIO12 as GPIO) |
| */ |
| cntrl0Reg = mfdcr(cntrl0); |
| mtdcr(cntrl0, cntrl0Reg | 0x03000000); |
| out32(IBM405GP_GPIO0_ODR, in32(IBM405GP_GPIO0_ODR) & ~0x00180000); |
| out32(IBM405GP_GPIO0_TCR, in32(IBM405GP_GPIO0_TCR) & ~0x00180000); |
| udelay(1000); /* wait some time before reading input */ |
| value = in32(IBM405GP_GPIO0_IR) & 0x00180000; /* get config bits */ |
| |
| /* |
| * Restore GPIO settings |
| */ |
| mtdcr(cntrl0, cntrl0Reg); |
| |
| switch (value) { |
| case 0x00180000: |
| /* CS2==1 && CS3==1 -> version 1 */ |
| return 1; |
| case 0x00080000: |
| /* CS2==0 && CS3==1 -> version 2 */ |
| return 2; |
| case 0x00100000: |
| /* CS2==1 && CS3==0 -> version 3 */ |
| return 3; |
| case 0x00000000: |
| /* CS2==0 && CS3==0 -> version 4 */ |
| return 4; |
| default: |
| /* should not be reached! */ |
| return 2; |
| } |
| } |
| |
| |
| int misc_init_f (void) |
| { |
| return 0; /* dummy implementation */ |
| } |
| |
| |
| int misc_init_r (void) |
| { |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| bd_t *bd = gd->bd; |
| char * tmp; /* Temporary char pointer */ |
| unsigned long cntrl0Reg; |
| |
| #ifdef CONFIG_CPCI405_VER2 |
| unsigned char *dst; |
| ulong len = sizeof(fpgadata); |
| int status; |
| int index; |
| int i; |
| |
| /* |
| * On CPCI-405 version 2 the environment is saved in eeprom! |
| * FPGA can be gzip compressed (malloc) and booted this late. |
| */ |
| |
| if (cpci405_version() >= 2) { |
| /* |
| * Setup GPIO pins (CS6+CS7 as GPIO) |
| */ |
| cntrl0Reg = mfdcr(cntrl0); |
| mtdcr(cntrl0, cntrl0Reg | 0x00300000); |
| |
| dst = malloc(CFG_FPGA_MAX_SIZE); |
| if (gunzip (dst, CFG_FPGA_MAX_SIZE, (uchar *)fpgadata, (int *)&len) != 0) { |
| printf ("GUNZIP ERROR - must RESET board to recover\n"); |
| do_reset (NULL, 0, 0, NULL); |
| } |
| |
| status = fpga_boot(dst, len); |
| if (status != 0) { |
| printf("\nFPGA: Booting failed "); |
| switch (status) { |
| case ERROR_FPGA_PRG_INIT_LOW: |
| printf("(Timeout: INIT not low after asserting PROGRAM*)\n "); |
| break; |
| case ERROR_FPGA_PRG_INIT_HIGH: |
| printf("(Timeout: INIT not high after deasserting PROGRAM*)\n "); |
| break; |
| case ERROR_FPGA_PRG_DONE: |
| printf("(Timeout: DONE not high after programming FPGA)\n "); |
| break; |
| } |
| |
| /* display infos on fpgaimage */ |
| index = 15; |
| for (i=0; i<4; i++) { |
| len = dst[index]; |
| printf("FPGA: %s\n", &(dst[index+1])); |
| index += len+3; |
| } |
| putc ('\n'); |
| /* delayed reboot */ |
| for (i=20; i>0; i--) { |
| printf("Rebooting in %2d seconds \r",i); |
| for (index=0;index<1000;index++) |
| udelay(1000); |
| } |
| putc ('\n'); |
| do_reset(NULL, 0, 0, NULL); |
| } |
| |
| /* restore gpio/cs settings */ |
| mtdcr(cntrl0, cntrl0Reg); |
| |
| puts("FPGA: "); |
| |
| /* display infos on fpgaimage */ |
| index = 15; |
| for (i=0; i<4; i++) { |
| len = dst[index]; |
| printf("%s ", &(dst[index+1])); |
| index += len+3; |
| } |
| putc ('\n'); |
| |
| free(dst); |
| |
| /* |
| * Reset FPGA via FPGA_DATA pin |
| */ |
| SET_FPGA(FPGA_PRG | FPGA_CLK); |
| udelay(1000); /* wait 1ms */ |
| SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA); |
| udelay(1000); /* wait 1ms */ |
| |
| if (cpci405_version() == 3) { |
| volatile unsigned short *fpga_mode = (unsigned short *)CFG_FPGA_BASE_ADDR; |
| volatile unsigned char *leds = (unsigned char *)CFG_LED_ADDR; |
| |
| /* |
| * Enable outputs in fpga on version 3 board |
| */ |
| *fpga_mode |= CFG_FPGA_MODE_ENABLE_OUTPUT; |
| |
| /* |
| * Set outputs to 0 |
| */ |
| *leds = 0x00; |
| |
| /* |
| * Reset external DUART |
| */ |
| *fpga_mode |= CFG_FPGA_MODE_DUART_RESET; |
| udelay(100); |
| *fpga_mode &= ~(CFG_FPGA_MODE_DUART_RESET); |
| } |
| } |
| else { |
| puts("\n*** U-Boot Version does not match Board Version!\n"); |
| puts("*** CPCI-405 Version 1.x detected!\n"); |
| puts("*** Please use correct U-Boot version (CPCI405 instead of CPCI4052)!\n\n"); |
| } |
| |
| #else /* CONFIG_CPCI405_VER2 */ |
| |
| /* |
| * Generate last byte of ip-addr from code-plug @ 0xf0000400 |
| */ |
| if (ctermm2()) { |
| char str[32]; |
| unsigned char ipbyte = *(unsigned char *)0xf0000400; |
| |
| /* |
| * Only overwrite ip-addr with allowed values |
| */ |
| if ((ipbyte != 0x00) && (ipbyte != 0xff)) { |
| bd->bi_ip_addr = (bd->bi_ip_addr & 0xffffff00) | ipbyte; |
| sprintf(str, "%ld.%ld.%ld.%ld", |
| (bd->bi_ip_addr & 0xff000000) >> 24, |
| (bd->bi_ip_addr & 0x00ff0000) >> 16, |
| (bd->bi_ip_addr & 0x0000ff00) >> 8, |
| (bd->bi_ip_addr & 0x000000ff)); |
| setenv("ipaddr", str); |
| } |
| } |
| |
| if (cpci405_version() >= 2) { |
| puts("\n*** U-Boot Version does not match Board Version!\n"); |
| puts("*** CPCI-405 Board Version 2.x detected!\n"); |
| puts("*** Please use correct U-Boot version (CPCI4052 instead of CPCI405)!\n\n"); |
| } |
| |
| #endif /* CONFIG_CPCI405_VER2 */ |
| |
| /* |
| * Select cts (and not dsr) on uart1 |
| */ |
| cntrl0Reg = mfdcr(cntrl0); |
| mtdcr(cntrl0, cntrl0Reg | 0x00001000); |
| |
| /* |
| * Write ethernet addr in NVRAM for VxWorks |
| */ |
| tmp = (char *)CFG_NVRAM_BASE_ADDR + CFG_NVRAM_VXWORKS_OFFS; |
| memcpy( (char *)tmp, (char *)&bd->bi_enetaddr[0], 6 ); |
| return (0); |
| } |
| |
| |
| /* |
| * Check Board Identity: |
| */ |
| |
| int checkboard (void) |
| { |
| #ifndef CONFIG_CPCI405_VER2 |
| int index; |
| int len; |
| #endif |
| unsigned char str[64]; |
| int i = getenv_r ("serial#", str, sizeof(str)); |
| unsigned short ver; |
| |
| puts ("Board: "); |
| |
| if (i == -1) { |
| puts ("### No HW ID - assuming CPCI405"); |
| } else { |
| puts(str); |
| } |
| |
| ver = cpci405_version(); |
| printf(" (Ver %d.x, ", ver); |
| |
| #if 0 /* test-only */ |
| if (ver >= 2) { |
| volatile u16 *fpga_status = (u16 *)CFG_FPGA_BASE_ADDR + 1; |
| |
| if (*fpga_status & CFG_FPGA_STATUS_FLASH) { |
| puts ("FLASH Bank B, "); |
| } else { |
| puts ("FLASH Bank A, "); |
| } |
| } |
| #endif |
| |
| if (ctermm2()) { |
| printf("CTERM-M2 - Id=0x%02x)", *(unsigned char *)0xf0000400); |
| } else { |
| if (cpci405_host()) { |
| puts ("PCI Host Version)"); |
| } else { |
| puts ("PCI Adapter Version)"); |
| } |
| } |
| |
| #ifndef CONFIG_CPCI405_VER2 |
| puts ("\nFPGA: "); |
| |
| /* display infos on fpgaimage */ |
| index = 15; |
| for (i=0; i<4; i++) { |
| len = fpgadata[index]; |
| printf("%s ", &(fpgadata[index+1])); |
| index += len+3; |
| } |
| #endif |
| |
| putc ('\n'); |
| |
| return 0; |
| } |
| |
| /* ------------------------------------------------------------------------- */ |
| |
| long int initdram (int board_type) |
| { |
| unsigned long val; |
| |
| mtdcr(memcfga, mem_mb0cf); |
| val = mfdcr(memcfgd); |
| |
| #if 0 |
| printf("\nmb0cf=%x\n", val); /* test-only */ |
| printf("strap=%x\n", mfdcr(strap)); /* test-only */ |
| #endif |
| |
| return (4*1024*1024 << ((val & 0x000e0000) >> 17)); |
| } |
| |
| /* ------------------------------------------------------------------------- */ |
| |
| int testdram (void) |
| { |
| /* TODO: XXX XXX XXX */ |
| printf ("test: 16 MB - ok\n"); |
| |
| return (0); |
| } |
| |
| /* ------------------------------------------------------------------------- */ |
| |
| #ifdef CONFIG_CPCI405_VER2 |
| #ifdef CONFIG_IDE_RESET |
| |
| void ide_set_reset(int on) |
| { |
| volatile unsigned short *fpga_mode = (unsigned short *)CFG_FPGA_BASE_ADDR; |
| |
| /* |
| * Assert or deassert CompactFlash Reset Pin |
| */ |
| if (on) { /* assert RESET */ |
| *fpga_mode &= ~(CFG_FPGA_MODE_CF_RESET); |
| } else { /* release RESET */ |
| *fpga_mode |= CFG_FPGA_MODE_CF_RESET; |
| } |
| } |
| |
| #endif /* CONFIG_IDE_RESET */ |
| #endif /* CONFIG_CPCI405_VER2 */ |
| |
| /* ------------------------------------------------------------------------- */ |