board/freescale/p1_p2_rdb/pci.c

/*
 * Copyright 2009 Freescale Semiconductor, Inc.
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

#include <common.h>
#include <command.h>
#include <pci.h>
#include <asm/immap_85xx.h>
#include <asm/io.h>
#include <asm/fsl_pci.h>
#include <libfdt.h>
#include <fdt_support.h>

DECLARE_GLOBAL_DATA_PTR;

#ifdef CONFIG_PCIE1
static struct pci_controller pcie1_hose;
#endif

#ifdef CONFIG_PCIE2
static struct pci_controller pcie2_hose;
#endif

void pci_init_board(void)
{
	struct fsl_pci_info pci_info[2];
	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
	uint devdisr = in_be32(&gur->devdisr);
	uint io_sel = (in_be32(&gur->pordevsr) & MPC85xx_PORDEVSR_IO_SEL) >> 19;
	uint host_agent = (in_be32(&gur->porbmsr) & MPC85xx_PORBMSR_HA) >> 16;
	int num = 0;
	int first_free_busno = 0;

	int pcie_ep, pcie_configured;

	debug ("   pci_init_board: devdisr=%x, io_sel=%x, host_agent=%x\n",
			devdisr, io_sel, host_agent);

	if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII2_DIS))
		printf ("    eTSEC2 is in sgmii mode.\n");

#ifdef CONFIG_PCIE2
	SET_STD_PCIE_INFO(pci_info[num], 2);
	pcie_ep = is_fsl_pci_agent(LAW_TRGT_IF_PCIE_2, host_agent);
	pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_2, io_sel);

	if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
		puts ("\n    PCIE2 connected to Slot 1 as ");
		printf ("%s (base address %lx)",
			pcie_ep ? "End Point": "Root Complex", pci_info[num].regs);
		first_free_busno = fsl_pci_init_port(&pci_info[num],
					&pcie2_hose, first_free_busno);
		num++;
	} else {
		printf ("    PCIE2: disabled\n");
	}
#else
	set_bits32(&gur->devdisr, MPC85xx_DEVDISR_PCIE2); /* disable */
#endif

#ifdef CONFIG_PCIE1
	SET_STD_PCIE_INFO(pci_info[num], 1);

	pcie_ep = is_fsl_pci_agent(LAW_TRGT_IF_PCIE_1, host_agent);
	pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_1, io_sel);

	if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
		puts ("\n    PCIE1 connected to Slot 2 as ");
		printf ("%s (base address %lx)",
				pcie_ep ? "End Point" : "Root Complex",
				pci_info[num].regs);
		first_free_busno = fsl_pci_init_port(&pci_info[num],
					&pcie1_hose, first_free_busno);
		num++;
	} else {
		printf ("    PCIE1: disabled\n");
	}
#else
	set_bits32(&gur->devdisr, MPC85xx_DEVDISR_PCIE); /* disable */
#endif
}

void ft_pci_board_setup(void *blob)
{
/* According to h/w manual, PCIE2 is at lower address(0x9000)
 * than PCIE1(0xa000).
 * Hence PCIE2 is made to occupy the pci1 position in dts to
 * keep the addresses sorted there.
 * Generally the case with all FSL SOCs.
 */
#ifdef CONFIG_PCIE2
	ft_fsl_pci_setup(blob, "pci1", &pcie2_hose);
#endif
#ifdef CONFIG_PCIE1
	ft_fsl_pci_setup(blob, "pci2", &pcie1_hose);
#endif
}