| /* |
| * Copyright (C) 2008 Atmel Corporation |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| #ifndef __AVR32_PORTMUX_GPIO_H__ |
| #define __AVR32_PORTMUX_GPIO_H__ |
| |
| #include <asm/io.h> |
| |
| /* Register layout for this specific device */ |
| #include <asm/arch/gpio-impl.h> |
| |
| /* Register access macros */ |
| #define gpio_readl(port, reg) \ |
| __raw_readl(&((struct gpio_regs *)port)->reg) |
| #define gpio_writel(gpio, reg, value) \ |
| __raw_writel(value, &((struct gpio_regs *)port)->reg) |
| |
| /* Portmux API starts here. See doc/README.AVR32-port-muxing */ |
| |
| enum portmux_function { |
| PORTMUX_FUNC_A, |
| PORTMUX_FUNC_B, |
| PORTMUX_FUNC_C, |
| PORTMUX_FUNC_D, |
| }; |
| |
| #define PORTMUX_DIR_INPUT (0 << 0) |
| #define PORTMUX_DIR_OUTPUT (1 << 0) |
| #define PORTMUX_INIT_LOW (0 << 1) |
| #define PORTMUX_INIT_HIGH (1 << 1) |
| #define PORTMUX_PULL_UP (1 << 2) |
| #define PORTMUX_PULL_DOWN (2 << 2) |
| #define PORTMUX_BUSKEEPER (3 << 2) |
| #define PORTMUX_DRIVE_MIN (0 << 4) |
| #define PORTMUX_DRIVE_LOW (1 << 4) |
| #define PORTMUX_DRIVE_HIGH (2 << 4) |
| #define PORTMUX_DRIVE_MAX (3 << 4) |
| #define PORTMUX_OPEN_DRAIN (1 << 6) |
| |
| void portmux_select_peripheral(void *port, unsigned long pin_mask, |
| enum portmux_function func, unsigned long flags); |
| void portmux_select_gpio(void *port, unsigned long pin_mask, |
| unsigned long flags); |
| |
| /* Internal helper functions */ |
| |
| static inline void *gpio_pin_to_port(unsigned int pin) |
| { |
| return (void *)GPIO_BASE + (pin >> 5) * 0x200; |
| } |
| |
| static inline void __gpio_set_output_value(void *port, unsigned int pin, |
| int value) |
| { |
| if (value) |
| gpio_writel(port, OVRS, 1 << pin); |
| else |
| gpio_writel(port, OVRC, 1 << pin); |
| } |
| |
| static inline int __gpio_get_input_value(void *port, unsigned int pin) |
| { |
| return (gpio_readl(port, PVR) >> pin) & 1; |
| } |
| |
| void gpio_set_output_value(unsigned int pin, int value); |
| int gpio_get_input_value(unsigned int pin); |
| |
| /* GPIO API starts here */ |
| |
| /* |
| * GCC doesn't realize that the constant case is extremely trivial, |
| * so we need to help it make the right decision by using |
| * always_inline. |
| */ |
| __attribute__((always_inline)) |
| static inline void gpio_set_value(unsigned int pin, int value) |
| { |
| if (__builtin_constant_p(pin)) |
| __gpio_set_output_value(gpio_pin_to_port(pin), |
| pin & 0x1f, value); |
| else |
| gpio_set_output_value(pin, value); |
| } |
| |
| __attribute__((always_inline)) |
| static inline int gpio_get_value(unsigned int pin) |
| { |
| if (__builtin_constant_p(pin)) |
| return __gpio_get_input_value(gpio_pin_to_port(pin), |
| pin & 0x1f); |
| else |
| return gpio_get_input_value(pin); |
| } |
| |
| #endif /* __AVR32_PORTMUX_GPIO_H__ */ |