| /* |
| * (C) Copyright 2008 Wolfgang Grandegger <wg@denx.de> |
| * |
| * (C) Copyright 2006 |
| * Thomas Waehner, TQ-Systems GmbH, thomas.waehner@tqs.de. |
| * |
| * (C) Copyright 2005 |
| * Stefan Roese, DENX Software Engineering, sr@denx.de. |
| * |
| * Copyright 2004 Freescale Semiconductor. |
| * (C) Copyright 2002,2003, Motorola Inc. |
| * Xianghua Xiao, (X.Xiao@motorola.com) |
| * |
| * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com> |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include <common.h> |
| #include <pci.h> |
| #include <asm/processor.h> |
| #include <asm/immap_85xx.h> |
| #include <asm/fsl_pci.h> |
| #include <asm/io.h> |
| #include <ioports.h> |
| #include <flash.h> |
| #include <libfdt.h> |
| #include <fdt_support.h> |
| #include <netdev.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| extern flash_info_t flash_info[]; /* FLASH chips info */ |
| |
| void local_bus_init (void); |
| ulong flash_get_size (ulong base, int banknum); |
| |
| #ifdef CONFIG_PS2MULT |
| void ps2mult_early_init (void); |
| #endif |
| |
| #ifdef CONFIG_CPM2 |
| /* |
| * I/O Port configuration table |
| * |
| * if conf is 1, then that port pin will be configured at boot time |
| * according to the five values podr/pdir/ppar/psor/pdat for that entry |
| */ |
| |
| const iop_conf_t iop_conf_tab[4][32] = { |
| |
| /* Port A: conf, ppar, psor, pdir, podr, pdat */ |
| { |
| {1, 1, 1, 0, 0, 0}, /* PA31: FCC1 MII COL */ |
| {1, 1, 1, 0, 0, 0}, /* PA30: FCC1 MII CRS */ |
| {1, 1, 1, 1, 0, 0}, /* PA29: FCC1 MII TX_ER */ |
| {1, 1, 1, 1, 0, 0}, /* PA28: FCC1 MII TX_EN */ |
| {1, 1, 1, 0, 0, 0}, /* PA27: FCC1 MII RX_DV */ |
| {1, 1, 1, 0, 0, 0}, /* PA26: FCC1 MII RX_ER */ |
| {0, 1, 0, 1, 0, 0}, /* PA25: FCC1 ATMTXD[0] */ |
| {0, 1, 0, 1, 0, 0}, /* PA24: FCC1 ATMTXD[1] */ |
| {0, 1, 0, 1, 0, 0}, /* PA23: FCC1 ATMTXD[2] */ |
| {0, 1, 0, 1, 0, 0}, /* PA22: FCC1 ATMTXD[3] */ |
| {1, 1, 0, 1, 0, 0}, /* PA21: FCC1 MII TxD[3] */ |
| {1, 1, 0, 1, 0, 0}, /* PA20: FCC1 MII TxD[2] */ |
| {1, 1, 0, 1, 0, 0}, /* PA19: FCC1 MII TxD[1] */ |
| {1, 1, 0, 1, 0, 0}, /* PA18: FCC1 MII TxD[0] */ |
| {1, 1, 0, 0, 0, 0}, /* PA17: FCC1 MII RxD[0] */ |
| {1, 1, 0, 0, 0, 0}, /* PA16: FCC1 MII RxD[1] */ |
| {1, 1, 0, 0, 0, 0}, /* PA15: FCC1 MII RxD[2] */ |
| {1, 1, 0, 0, 0, 0}, /* PA14: FCC1 MII RxD[3] */ |
| {0, 1, 0, 0, 0, 0}, /* PA13: FCC1 ATMRXD[3] */ |
| {0, 1, 0, 0, 0, 0}, /* PA12: FCC1 ATMRXD[2] */ |
| {0, 1, 0, 0, 0, 0}, /* PA11: FCC1 ATMRXD[1] */ |
| {0, 1, 0, 0, 0, 0}, /* PA10: FCC1 ATMRXD[0] */ |
| {0, 1, 1, 1, 0, 0}, /* PA9 : FCC1 L1TXD */ |
| {0, 1, 1, 0, 0, 0}, /* PA8 : FCC1 L1RXD */ |
| {0, 0, 0, 1, 0, 0}, /* PA7 : PA7 */ |
| {0, 1, 1, 1, 0, 0}, /* PA6 : TDM A1 L1RSYNC */ |
| {0, 0, 0, 1, 0, 0}, /* PA5 : PA5 */ |
| {0, 0, 0, 1, 0, 0}, /* PA4 : PA4 */ |
| {0, 0, 0, 1, 0, 0}, /* PA3 : PA3 */ |
| {0, 0, 0, 1, 0, 0}, /* PA2 : PA2 */ |
| {0, 0, 0, 0, 0, 0}, /* PA1 : FREERUN */ |
| {0, 0, 0, 1, 0, 0} /* PA0 : PA0 */ |
| }, |
| |
| /* Port B: conf, ppar, psor, pdir, podr, pdat */ |
| { |
| {1, 1, 0, 1, 0, 0}, /* PB31: FCC2 MII TX_ER */ |
| {1, 1, 0, 0, 0, 0}, /* PB30: FCC2 MII RX_DV */ |
| {1, 1, 1, 1, 0, 0}, /* PB29: FCC2 MII TX_EN */ |
| {1, 1, 0, 0, 0, 0}, /* PB28: FCC2 MII RX_ER */ |
| {1, 1, 0, 0, 0, 0}, /* PB27: FCC2 MII COL */ |
| {1, 1, 0, 0, 0, 0}, /* PB26: FCC2 MII CRS */ |
| {1, 1, 0, 1, 0, 0}, /* PB25: FCC2 MII TxD[3] */ |
| {1, 1, 0, 1, 0, 0}, /* PB24: FCC2 MII TxD[2] */ |
| {1, 1, 0, 1, 0, 0}, /* PB23: FCC2 MII TxD[1] */ |
| {1, 1, 0, 1, 0, 0}, /* PB22: FCC2 MII TxD[0] */ |
| {1, 1, 0, 0, 0, 0}, /* PB21: FCC2 MII RxD[0] */ |
| {1, 1, 0, 0, 0, 0}, /* PB20: FCC2 MII RxD[1] */ |
| {1, 1, 0, 0, 0, 0}, /* PB19: FCC2 MII RxD[2] */ |
| {1, 1, 0, 0, 0, 0}, /* PB18: FCC2 MII RxD[3] */ |
| {1, 1, 0, 0, 0, 0}, /* PB17: FCC3:RX_DIV */ |
| {1, 1, 0, 0, 0, 0}, /* PB16: FCC3:RX_ERR */ |
| {1, 1, 0, 1, 0, 0}, /* PB15: FCC3:TX_ERR */ |
| {1, 1, 0, 1, 0, 0}, /* PB14: FCC3:TX_EN */ |
| {1, 1, 0, 0, 0, 0}, /* PB13: FCC3:COL */ |
| {1, 1, 0, 0, 0, 0}, /* PB12: FCC3:CRS */ |
| {1, 1, 0, 0, 0, 0}, /* PB11: FCC3:RXD */ |
| {1, 1, 0, 0, 0, 0}, /* PB10: FCC3:RXD */ |
| {1, 1, 0, 0, 0, 0}, /* PB9 : FCC3:RXD */ |
| {1, 1, 0, 0, 0, 0}, /* PB8 : FCC3:RXD */ |
| {1, 1, 0, 1, 0, 0}, /* PB7 : FCC3:TXD */ |
| {1, 1, 0, 1, 0, 0}, /* PB6 : FCC3:TXD */ |
| {1, 1, 0, 1, 0, 0}, /* PB5 : FCC3:TXD */ |
| {1, 1, 0, 1, 0, 0}, /* PB4 : FCC3:TXD */ |
| {0, 0, 0, 0, 0, 0}, /* PB3 : pin doesn't exist */ |
| {0, 0, 0, 0, 0, 0}, /* PB2 : pin doesn't exist */ |
| {0, 0, 0, 0, 0, 0}, /* PB1 : pin doesn't exist */ |
| {0, 0, 0, 0, 0, 0} /* PB0 : pin doesn't exist */ |
| }, |
| |
| /* Port C: conf, ppar, psor, pdir, podr, pdat */ |
| { |
| {0, 0, 0, 1, 0, 0}, /* PC31: PC31 */ |
| {0, 0, 0, 1, 0, 0}, /* PC30: PC30 */ |
| {0, 1, 1, 0, 0, 0}, /* PC29: SCC1 EN *CLSN */ |
| {0, 0, 0, 1, 0, 0}, /* PC28: PC28 */ |
| {0, 0, 0, 1, 0, 0}, /* PC27: UART Clock in */ |
| {0, 0, 0, 1, 0, 0}, /* PC26: PC26 */ |
| {0, 0, 0, 1, 0, 0}, /* PC25: PC25 */ |
| {0, 0, 0, 1, 0, 0}, /* PC24: PC24 */ |
| {0, 1, 0, 1, 0, 0}, /* PC23: ATMTFCLK */ |
| {0, 1, 0, 0, 0, 0}, /* PC22: ATMRFCLK */ |
| {1, 1, 0, 0, 0, 0}, /* PC21: SCC1 EN RXCLK */ |
| {1, 1, 0, 0, 0, 0}, /* PC20: SCC1 EN TXCLK */ |
| {1, 1, 0, 0, 0, 0}, /* PC19: FCC2 MII RX_CLK CLK13 */ |
| {1, 1, 0, 0, 0, 0}, /* PC18: FCC Tx Clock (CLK14) */ |
| {1, 1, 0, 0, 0, 0}, /* PC17: PC17 */ |
| {1, 1, 0, 0, 0, 0}, /* PC16: FCC Tx Clock (CLK16) */ |
| {0, 1, 0, 0, 0, 0}, /* PC15: PC15 */ |
| {0, 1, 0, 0, 0, 0}, /* PC14: SCC1 EN *CD */ |
| {0, 1, 0, 0, 0, 0}, /* PC13: PC13 */ |
| {0, 1, 0, 1, 0, 0}, /* PC12: PC12 */ |
| {0, 0, 0, 1, 0, 0}, /* PC11: LXT971 transmit control */ |
| {0, 0, 0, 1, 0, 0}, /* PC10: FETHMDC */ |
| {0, 0, 0, 0, 0, 0}, /* PC9 : FETHMDIO */ |
| {0, 0, 0, 1, 0, 0}, /* PC8 : PC8 */ |
| {0, 0, 0, 1, 0, 0}, /* PC7 : PC7 */ |
| {0, 0, 0, 1, 0, 0}, /* PC6 : PC6 */ |
| {0, 0, 0, 1, 0, 0}, /* PC5 : PC5 */ |
| {0, 0, 0, 1, 0, 0}, /* PC4 : PC4 */ |
| {0, 0, 0, 1, 0, 0}, /* PC3 : PC3 */ |
| {0, 0, 0, 1, 0, 1}, /* PC2 : ENET FDE */ |
| {0, 0, 0, 1, 0, 0}, /* PC1 : ENET DSQE */ |
| {0, 0, 0, 1, 0, 0}, /* PC0 : ENET LBK */ |
| }, |
| |
| /* Port D: conf, ppar, psor, pdir, podr, pdat */ |
| { |
| #ifdef CONFIG_TQM8560 |
| {1, 1, 0, 0, 0, 0}, /* PD31: SCC1 EN RxD */ |
| {1, 1, 1, 1, 0, 0}, /* PD30: SCC1 EN TxD */ |
| {1, 1, 0, 1, 0, 0}, /* PD29: SCC1 EN TENA */ |
| #else /* !CONFIG_TQM8560 */ |
| {0, 0, 0, 0, 0, 0}, /* PD31: PD31 */ |
| {0, 0, 0, 0, 0, 0}, /* PD30: PD30 */ |
| {0, 0, 0, 0, 0, 0}, /* PD29: PD29 */ |
| #endif /* CONFIG_TQM8560 */ |
| {1, 1, 0, 0, 0, 0}, /* PD28: PD28 */ |
| {1, 1, 0, 1, 0, 0}, /* PD27: PD27 */ |
| {1, 1, 0, 1, 0, 0}, /* PD26: PD26 */ |
| {0, 0, 0, 1, 0, 0}, /* PD25: PD25 */ |
| {0, 0, 0, 1, 0, 0}, /* PD24: PD24 */ |
| {0, 0, 0, 1, 0, 0}, /* PD23: PD23 */ |
| {0, 0, 0, 1, 0, 0}, /* PD22: PD22 */ |
| {0, 0, 0, 1, 0, 0}, /* PD21: PD21 */ |
| {0, 0, 0, 1, 0, 0}, /* PD20: PD20 */ |
| {0, 0, 0, 1, 0, 0}, /* PD19: PD19 */ |
| {0, 0, 0, 1, 0, 0}, /* PD18: PD18 */ |
| {0, 1, 0, 0, 0, 0}, /* PD17: FCC1 ATMRXPRTY */ |
| {0, 1, 0, 1, 0, 0}, /* PD16: FCC1 ATMTXPRTY */ |
| {0, 1, 1, 0, 1, 0}, /* PD15: I2C SDA */ |
| {0, 0, 0, 1, 0, 0}, /* PD14: LED */ |
| {0, 0, 0, 0, 0, 0}, /* PD13: PD13 */ |
| {0, 0, 0, 0, 0, 0}, /* PD12: PD12 */ |
| {0, 0, 0, 0, 0, 0}, /* PD11: PD11 */ |
| {0, 0, 0, 0, 0, 0}, /* PD10: PD10 */ |
| {0, 1, 0, 1, 0, 0}, /* PD9 : SMC1 TXD */ |
| {0, 1, 0, 0, 0, 0}, /* PD8 : SMC1 RXD */ |
| {0, 0, 0, 1, 0, 1}, /* PD7 : PD7 */ |
| {0, 0, 0, 1, 0, 1}, /* PD6 : PD6 */ |
| {0, 0, 0, 1, 0, 1}, /* PD5 : PD5 */ |
| {0, 0, 0, 1, 0, 1}, /* PD4 : PD4 */ |
| {0, 0, 0, 0, 0, 0}, /* PD3 : pin doesn't exist */ |
| {0, 0, 0, 0, 0, 0}, /* PD2 : pin doesn't exist */ |
| {0, 0, 0, 0, 0, 0}, /* PD1 : pin doesn't exist */ |
| {0, 0, 0, 0, 0, 0} /* PD0 : pin doesn't exist */ |
| } |
| }; |
| #endif /* CONFIG_CPM2 */ |
| |
| #define CASL_STRING1 "casl=xx" |
| #define CASL_STRING2 "casl=" |
| |
| static const int casl_table[] = { 20, 25, 30 }; |
| #define N_CASL (sizeof(casl_table) / sizeof(casl_table[0])) |
| |
| int cas_latency (void) |
| { |
| char *s = getenv ("serial#"); |
| int casl; |
| int val; |
| int i; |
| |
| casl = CONFIG_DDR_DEFAULT_CL; |
| |
| if (s != NULL) { |
| if (strncmp(s + strlen (s) - strlen (CASL_STRING1), |
| CASL_STRING2, strlen (CASL_STRING2)) == 0) { |
| val = simple_strtoul (s + strlen (s) - 2, NULL, 10); |
| |
| for (i = 0; i < N_CASL; ++i) { |
| if (val == casl_table[i]) { |
| return val; |
| } |
| } |
| } |
| } |
| |
| return casl; |
| } |
| |
| int checkboard (void) |
| { |
| char *s = getenv ("serial#"); |
| |
| printf ("Board: %s", CONFIG_BOARDNAME); |
| if (s != NULL) { |
| puts (", serial# "); |
| puts (s); |
| } |
| putc ('\n'); |
| |
| /* |
| * Initialize local bus. |
| */ |
| local_bus_init (); |
| |
| return 0; |
| } |
| |
| int misc_init_r (void) |
| { |
| volatile ccsr_lbc_t *memctl = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); |
| |
| /* |
| * Adjust flash start and offset to detected values |
| */ |
| gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize; |
| gd->bd->bi_flashoffset = 0; |
| |
| /* |
| * Recalculate CS configuration if second FLASH bank is available |
| */ |
| if (flash_info[0].size > 0) { |
| memctl->or1 = ((-flash_info[0].size) & 0xffff8000) | |
| (CONFIG_SYS_OR1_PRELIM & 0x00007fff); |
| memctl->br1 = gd->bd->bi_flashstart | |
| (CONFIG_SYS_BR1_PRELIM & 0x00007fff); |
| /* |
| * Re-check to get correct base address for bank 1 |
| */ |
| flash_get_size (gd->bd->bi_flashstart, 0); |
| } else { |
| memctl->or1 = 0; |
| memctl->br1 = 0; |
| } |
| |
| /* |
| * If bank 1 is equipped, bank 0 is mapped after bank 1 |
| */ |
| memctl->or0 = ((-flash_info[1].size) & 0xffff8000) | |
| (CONFIG_SYS_OR0_PRELIM & 0x00007fff); |
| memctl->br0 = (gd->bd->bi_flashstart + flash_info[0].size) | |
| (CONFIG_SYS_BR0_PRELIM & 0x00007fff); |
| /* |
| * Re-check to get correct base address for bank 0 |
| */ |
| flash_get_size (gd->bd->bi_flashstart + flash_info[0].size, 1); |
| |
| /* |
| * Re-do flash protection upon new addresses |
| */ |
| flash_protect (FLAG_PROTECT_CLEAR, |
| gd->bd->bi_flashstart, 0xffffffff, |
| &flash_info[CONFIG_SYS_MAX_FLASH_BANKS - 1]); |
| |
| /* Monitor protection ON by default */ |
| flash_protect (FLAG_PROTECT_SET, |
| CONFIG_SYS_MONITOR_BASE, 0xffffffff, |
| &flash_info[CONFIG_SYS_MAX_FLASH_BANKS - 1]); |
| |
| /* Environment protection ON by default */ |
| flash_protect (FLAG_PROTECT_SET, |
| CONFIG_ENV_ADDR, |
| CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1, |
| &flash_info[CONFIG_SYS_MAX_FLASH_BANKS - 1]); |
| |
| #ifdef CONFIG_ENV_ADDR_REDUND |
| /* Redundant environment protection ON by default */ |
| flash_protect (FLAG_PROTECT_SET, |
| CONFIG_ENV_ADDR_REDUND, |
| CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - 1, |
| &flash_info[CONFIG_SYS_MAX_FLASH_BANKS - 1]); |
| #endif |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_CAN_DRIVER |
| /* |
| * Initialize UPMC RAM |
| */ |
| static void upmc_write (u_char addr, uint val) |
| { |
| volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); |
| |
| out_be32 (&lbc->mdr, val); |
| |
| clrsetbits_be32(&lbc->mcmr, MxMR_MAD_MSK, |
| MxMR_OP_WARR | (addr & MxMR_MAD_MSK)); |
| |
| /* dummy access to perform write */ |
| out_8 ((void __iomem *)CONFIG_SYS_CAN_BASE, 0); |
| |
| /* normal operation */ |
| clrbits_be32(&lbc->mcmr, MxMR_OP_WARR); |
| } |
| #endif /* CONFIG_CAN_DRIVER */ |
| |
| uint get_lbc_clock (void) |
| { |
| volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); |
| sys_info_t sys_info; |
| ulong clkdiv = lbc->lcrr & LCRR_CLKDIV; |
| |
| get_sys_info (&sys_info); |
| |
| if (clkdiv == 2 || clkdiv == 4 || clkdiv == 8) { |
| #ifdef CONFIG_MPC8548 |
| /* |
| * Yes, the entire PQ38 family use the same |
| * bit-representation for twice the clock divider value. |
| */ |
| clkdiv *= 2; |
| #endif |
| return sys_info.freqSystemBus / clkdiv; |
| } |
| |
| puts("Invalid clock divider value in CONFIG_SYS_LBC_LCRR\n"); |
| |
| return 0; |
| } |
| |
| /* |
| * Initialize Local Bus |
| */ |
| void local_bus_init (void) |
| { |
| volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); |
| volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); |
| uint lbc_mhz = get_lbc_clock () / 1000000; |
| |
| #ifdef CONFIG_MPC8548 |
| uint svr = get_svr (); |
| uint lcrr; |
| |
| /* |
| * MPC revision < 2.0 |
| * According to MPC8548E_Device_Errata Rev. L, Erratum LBIU1: |
| * Modify engineering use only register at address 0xE_0F20. |
| * "1. Read register at offset 0xE_0F20 |
| * 2. And value with 0x0000_FFFF |
| * 3. OR result with 0x0000_0004 |
| * 4. Write result back to offset 0xE_0F20." |
| * |
| * According to MPC8548E_Device_Errata Rev. L, Erratum LBIU2: |
| * Modify engineering use only register at address 0xE_0F20. |
| * "1. Read register at offset 0xE_0F20 |
| * 2. And value with 0xFFFF_FFDF |
| * 3. Write result back to offset 0xE_0F20." |
| * |
| * Since it is the same register, we do the modification in one step. |
| */ |
| if (SVR_MAJ (svr) < 2) { |
| uint dummy = gur->lbiuiplldcr1; |
| dummy &= 0x0000FFDF; |
| dummy |= 0x00000004; |
| gur->lbiuiplldcr1 = dummy; |
| } |
| |
| lcrr = CONFIG_SYS_LBC_LCRR; |
| |
| /* |
| * Local Bus Clock > 83.3 MHz. According to timing |
| * specifications set LCRR[EADC] to 2 delay cycles. |
| */ |
| if (lbc_mhz > 83) { |
| lcrr &= ~LCRR_EADC; |
| lcrr |= LCRR_EADC_2; |
| } |
| |
| /* |
| * According to MPC8548ERMAD Rev. 1.3, 13.3.1.16, 13-30 |
| * disable PLL bypass for Local Bus Clock > 83 MHz. |
| */ |
| if (lbc_mhz >= 66) |
| lcrr &= (~LCRR_DBYP); /* DLL Enabled */ |
| |
| else |
| lcrr |= LCRR_DBYP; /* DLL Bypass */ |
| |
| lbc->lcrr = lcrr; |
| asm ("sync;isync;msync"); |
| |
| /* |
| * According to MPC8548ERMAD Rev.1.3 read back LCRR |
| * and terminate with isync |
| */ |
| lcrr = lbc->lcrr; |
| asm ("isync;"); |
| |
| /* let DLL stabilize */ |
| udelay (500); |
| |
| #else /* !CONFIG_MPC8548 */ |
| |
| /* |
| * Errata LBC11. |
| * Fix Local Bus clock glitch when DLL is enabled. |
| * |
| * If localbus freq is < 66MHz, DLL bypass mode must be used. |
| * If localbus freq is > 133MHz, DLL can be safely enabled. |
| * Between 66 and 133, the DLL is enabled with an override workaround. |
| */ |
| |
| if (lbc_mhz < 66) { |
| lbc->lcrr = CONFIG_SYS_LBC_LCRR | LCRR_DBYP; /* DLL Bypass */ |
| lbc->ltedr = LTEDR_BMD | LTEDR_PARD | LTEDR_WPD | LTEDR_WARA | |
| LTEDR_RAWA | LTEDR_CSD; /* Disable all error checking */ |
| |
| } else if (lbc_mhz >= 133) { |
| lbc->lcrr = CONFIG_SYS_LBC_LCRR & (~LCRR_DBYP); /* DLL Enabled */ |
| |
| } else { |
| /* |
| * On REV1 boards, need to change CLKDIV before enable DLL. |
| * Default CLKDIV is 8, change it to 4 temporarily. |
| */ |
| uint pvr = get_pvr (); |
| uint temp_lbcdll = 0; |
| |
| if (pvr == PVR_85xx_REV1) { |
| /* FIXME: Justify the high bit here. */ |
| lbc->lcrr = 0x10000004; |
| } |
| |
| lbc->lcrr = CONFIG_SYS_LBC_LCRR & (~LCRR_DBYP); /* DLL Enabled */ |
| udelay (200); |
| |
| /* |
| * Sample LBC DLL ctrl reg, upshift it to set the |
| * override bits. |
| */ |
| temp_lbcdll = gur->lbcdllcr; |
| gur->lbcdllcr = (((temp_lbcdll & 0xff) << 16) | 0x80000000); |
| asm ("sync;isync;msync"); |
| } |
| #endif /* !CONFIG_MPC8548 */ |
| |
| #ifdef CONFIG_CAN_DRIVER |
| /* |
| * According to timing specifications EAD must be |
| * set if Local Bus Clock is > 83 MHz. |
| */ |
| if (lbc_mhz > 83) |
| out_be32 (&lbc->or2, CONFIG_SYS_OR2_CAN | OR_UPM_EAD); |
| else |
| out_be32 (&lbc->or2, CONFIG_SYS_OR2_CAN); |
| out_be32 (&lbc->br2, CONFIG_SYS_BR2_CAN); |
| |
| /* LGPL4 is UPWAIT */ |
| out_be32(&lbc->mcmr, MxMR_DSx_3_CYCL | MxMR_GPL_x4DIS | MxMR_WLFx_3X); |
| |
| /* Initialize UPMC for CAN: single read */ |
| upmc_write (0x00, 0xFFFFED00); |
| upmc_write (0x01, 0xCCFFCC00); |
| upmc_write (0x02, 0x00FFCF00); |
| upmc_write (0x03, 0x00FFCF00); |
| upmc_write (0x04, 0x00FFDC00); |
| upmc_write (0x05, 0x00FFCF00); |
| upmc_write (0x06, 0x00FFED00); |
| upmc_write (0x07, 0x3FFFCC07); |
| |
| /* Initialize UPMC for CAN: single write */ |
| upmc_write (0x18, 0xFFFFED00); |
| upmc_write (0x19, 0xCCFFEC00); |
| upmc_write (0x1A, 0x00FFED80); |
| upmc_write (0x1B, 0x00FFED80); |
| upmc_write (0x1C, 0x00FFFC00); |
| upmc_write (0x1D, 0x0FFFEC00); |
| upmc_write (0x1E, 0x0FFFEF00); |
| upmc_write (0x1F, 0x3FFFEC05); |
| #endif /* CONFIG_CAN_DRIVER */ |
| } |
| |
| /* |
| * Initialize PCI Devices, report devices found. |
| */ |
| static int first_free_busno; |
| |
| #ifdef CONFIG_PCI1 |
| static struct pci_controller pci1_hose; |
| #endif /* CONFIG_PCI1 */ |
| |
| #ifdef CONFIG_PCIE1 |
| static struct pci_controller pcie1_hose; |
| #endif /* CONFIG_PCIE1 */ |
| |
| static inline void init_pci1(void) |
| { |
| volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); |
| #ifdef CONFIG_PCI1 |
| uint host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16; |
| volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *)CONFIG_SYS_PCI1_ADDR; |
| struct pci_controller *hose = &pci1_hose; |
| struct pci_region *r = hose->regions; |
| |
| /* PORDEVSR[15] */ |
| uint pci_32 = gur->pordevsr & MPC85xx_PORDEVSR_PCI1_PCI32; |
| /* PORDEVSR[14] */ |
| uint pci_arb = gur->pordevsr & MPC85xx_PORDEVSR_PCI1_ARB; |
| /* PORPLLSR[16] */ |
| uint pci_clk_sel = gur->porpllsr & MPC85xx_PORDEVSR_PCI1_SPD; |
| |
| uint pci_agent = (host_agent == 3) || (host_agent == 4 ) || |
| (host_agent == 6); |
| |
| uint pci_speed = CONFIG_SYS_CLK_FREQ; /* PCI PSPEED in [4:5] */ |
| |
| if (!(gur->devdisr & MPC85xx_DEVDISR_PCI1)) { |
| printf ("PCI1: %d bit, %s MHz, %s, %s, %s\n", |
| (pci_32) ? 32 : 64, |
| (pci_speed == 33333333) ? "33" : |
| (pci_speed == 66666666) ? "66" : "unknown", |
| pci_clk_sel ? "sync" : "async", |
| pci_agent ? "agent" : "host", |
| pci_arb ? "arbiter" : "external-arbiter"); |
| |
| |
| /* inbound */ |
| r += fsl_pci_setup_inbound_windows(r); |
| |
| /* outbound memory */ |
| pci_set_region (r++, |
| CONFIG_SYS_PCI1_MEM_BASE, |
| CONFIG_SYS_PCI1_MEM_PHYS, |
| CONFIG_SYS_PCI1_MEM_SIZE, |
| PCI_REGION_MEM); |
| |
| /* outbound io */ |
| pci_set_region (r++, |
| CONFIG_SYS_PCI1_IO_BASE, |
| CONFIG_SYS_PCI1_IO_PHYS, |
| CONFIG_SYS_PCI1_IO_SIZE, |
| PCI_REGION_IO); |
| |
| hose->region_count = r - hose->regions; |
| |
| hose->first_busno = first_free_busno; |
| |
| fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data); |
| |
| printf (" PCI on bus %02x..%02x\n", |
| hose->first_busno, hose->last_busno); |
| |
| first_free_busno = hose->last_busno + 1; |
| #ifdef CONFIG_PCIX_CHECK |
| if (!(gur->pordevsr & MPC85xx_PORDEVSR_PCI1)) { |
| ushort reg16 = |
| PCI_X_CMD_MAX_SPLIT | PCI_X_CMD_MAX_READ | |
| PCI_X_CMD_ERO | PCI_X_CMD_DPERR_E; |
| uint dev = PCI_BDF(hose->first_busno, 0, 0); |
| |
| /* PCI-X init */ |
| if (CONFIG_SYS_CLK_FREQ < 66000000) |
| puts ("PCI-X will only work at 66 MHz\n"); |
| |
| pci_hose_write_config_word (hose, dev, PCIX_COMMAND, |
| reg16); |
| } |
| #endif |
| } else { |
| puts ("PCI1: disabled\n"); |
| } |
| #else /* !CONFIG_PCI1 */ |
| gur->devdisr |= MPC85xx_DEVDISR_PCI1; /* disable */ |
| #endif /* CONFIG_PCI1 */ |
| } |
| |
| static inline void init_pcie1(void) |
| { |
| volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); |
| #ifdef CONFIG_PCIE1 |
| uint io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19; |
| uint host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16; |
| volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *)CONFIG_SYS_PCIE1_ADDR; |
| struct pci_controller *hose = &pcie1_hose; |
| int pcie_ep = (host_agent == 0) || (host_agent == 2 ) || |
| (host_agent == 3); |
| struct pci_region *r = hose->regions; |
| |
| int pcie_configured = io_sel >= 1; |
| |
| if (pcie_configured && !(gur->devdisr & MPC85xx_DEVDISR_PCIE)){ |
| printf ("PCIe: %s, base address %x", |
| pcie_ep ? "End point" : "Root complex", (uint)pci); |
| |
| if (pci->pme_msg_det) { |
| pci->pme_msg_det = 0xffffffff; |
| debug (", with errors. Clearing. Now 0x%08x", |
| pci->pme_msg_det); |
| } |
| puts ("\n"); |
| |
| /* inbound */ |
| r += fsl_pci_setup_inbound_windows(r); |
| |
| /* outbound memory */ |
| pci_set_region (r++, |
| CONFIG_SYS_PCIE1_MEM_BASE, |
| CONFIG_SYS_PCIE1_MEM_PHYS, |
| CONFIG_SYS_PCIE1_MEM_SIZE, |
| PCI_REGION_MEM); |
| |
| /* outbound io */ |
| pci_set_region (r++, |
| CONFIG_SYS_PCIE1_IO_BASE, |
| CONFIG_SYS_PCIE1_IO_PHYS, |
| CONFIG_SYS_PCIE1_IO_SIZE, |
| PCI_REGION_IO); |
| |
| hose->region_count = r - hose->regions; |
| |
| hose->first_busno = first_free_busno; |
| |
| fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data); |
| printf (" PCIe on bus %02x..%02x\n", |
| hose->first_busno, hose->last_busno); |
| |
| first_free_busno = hose->last_busno + 1; |
| |
| } else { |
| printf ("PCIe: disabled\n"); |
| } |
| #else /* !CONFIG_PCIE1 */ |
| gur->devdisr |= MPC85xx_DEVDISR_PCIE; /* disable */ |
| #endif /* CONFIG_PCIE1 */ |
| } |
| |
| void pci_init_board (void) |
| { |
| init_pci1(); |
| init_pcie1(); |
| } |
| |
| #ifdef CONFIG_OF_BOARD_SETUP |
| void ft_board_setup (void *blob, bd_t *bd) |
| { |
| ft_cpu_setup (blob, bd); |
| |
| #ifdef CONFIG_PCI1 |
| ft_fsl_pci_setup(blob, "pci0", &pci1_hose); |
| #endif |
| #ifdef CONFIG_PCIE1 |
| ft_fsl_pci_setup(blob, "pci1", &pcie1_hose); |
| #endif |
| } |
| #endif /* CONFIG_OF_BOARD_SETUP */ |
| |
| #ifdef CONFIG_BOARD_EARLY_INIT_R |
| int board_early_init_r (void) |
| { |
| #ifdef CONFIG_PS2MULT |
| ps2mult_early_init (); |
| #endif /* CONFIG_PS2MULT */ |
| return (0); |
| } |
| #endif /* CONFIG_BOARD_EARLY_INIT_R */ |
| |
| int board_eth_init(bd_t *bis) |
| { |
| cpu_eth_init(bis); /* Intialize TSECs first */ |
| return pci_eth_init(bis); |
| } |