board/freescale/mpc8569mds/mpc8569mds.c - filogic/uboot - Gitiles

 /*
  * Copyright 2009 Freescale Semiconductor.
  *
  * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
  *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
  * published by the Free Software Foundation; either version 2 of
  * the License, or (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  */

 #include <common.h>
 #include <pci.h>
 #include <asm/processor.h>
 #include <asm/mmu.h>
 #include <asm/immap_85xx.h>
 #include <asm/fsl_pci.h>
 #include <asm/fsl_ddr_sdram.h>
 #include <asm/io.h>
 #include <spd_sdram.h>
 #include <i2c.h>
 #include <ioports.h>
 #include <libfdt.h>
 #include <fdt_support.h>

 #include "bcsr.h"

 phys_size_t fixed_sdram(void);

 const qe_iop_conf_t qe_iop_conf_tab[] = {
 	/* QE_MUX_MDC */
 	{2,  31, 1, 0, 1}, /* QE_MUX_MDC               */

 	/* QE_MUX_MDIO */
 	{2,  30, 3, 0, 2}, /* QE_MUX_MDIO              */

 #if defined(CONFIG_SYS_UCC_RGMII_MODE)
 	/* UCC_1_RGMII */
 	{2, 11, 2, 0, 1}, /* CLK12 */
 	{0,  0, 1, 0, 3}, /* ENET1_TXD0_SER1_TXD0      */
 	{0,  1, 1, 0, 3}, /* ENET1_TXD1_SER1_TXD1      */
 	{0,  2, 1, 0, 1}, /* ENET1_TXD2_SER1_TXD2      */
 	{0,  3, 1, 0, 2}, /* ENET1_TXD3_SER1_TXD3      */
 	{0,  6, 2, 0, 3}, /* ENET1_RXD0_SER1_RXD0      */
 	{0,  7, 2, 0, 1}, /* ENET1_RXD1_SER1_RXD1      */
 	{0,  8, 2, 0, 2}, /* ENET1_RXD2_SER1_RXD2      */
 	{0,  9, 2, 0, 2}, /* ENET1_RXD3_SER1_RXD3      */
 	{0,  4, 1, 0, 2}, /* ENET1_TX_EN_SER1_RTS_B    */
 	{0, 12, 2, 0, 3}, /* ENET1_RX_DV_SER1_CTS_B    */
 	{2,  8, 2, 0, 1}, /* ENET1_GRXCLK              */
 	{2, 20, 1, 0, 2}, /* ENET1_GTXCLK              */

 	/* UCC_2_RGMII */
 	{2, 16, 2, 0, 3}, /* CLK17 */
 	{0, 14, 1, 0, 2}, /* ENET2_TXD0_SER2_TXD0      */
 	{0, 15, 1, 0, 2}, /* ENET2_TXD1_SER2_TXD1      */
 	{0, 16, 1, 0, 1}, /* ENET2_TXD2_SER2_TXD2      */
 	{0, 17, 1, 0, 1}, /* ENET2_TXD3_SER2_TXD3      */
 	{0, 20, 2, 0, 2}, /* ENET2_RXD0_SER2_RXD0      */
 	{0, 21, 2, 0, 1}, /* ENET2_RXD1_SER2_RXD1      */
 	{0, 22, 2, 0, 1}, /* ENET2_RXD2_SER2_RXD2      */
 	{0, 23, 2, 0, 1}, /* ENET2_RXD3_SER2_RXD3      */
 	{0, 18, 1, 0, 2}, /* ENET2_TX_EN_SER2_RTS_B    */
 	{0, 26, 2, 0, 3}, /* ENET2_RX_DV_SER2_CTS_B    */
 	{2,  3, 2, 0, 1}, /* ENET2_GRXCLK              */
 	{2,  2, 1, 0, 2}, /* ENET2_GTXCLK              */

 	/* UCC_3_RGMII */
 	{2, 11, 2, 0, 1}, /* CLK12 */
 	{0, 29, 1, 0, 2}, /* ENET3_TXD0_SER3_TXD0      */
 	{0, 30, 1, 0, 3}, /* ENET3_TXD1_SER3_TXD1      */
 	{0, 31, 1, 0, 2}, /* ENET3_TXD2_SER3_TXD2      */
 	{1,  0, 1, 0, 3}, /* ENET3_TXD3_SER3_TXD3      */
 	{1,  3, 2, 0, 3}, /* ENET3_RXD0_SER3_RXD0      */
 	{1,  4, 2, 0, 1}, /* ENET3_RXD1_SER3_RXD1      */
 	{1,  5, 2, 0, 2}, /* ENET3_RXD2_SER3_RXD2      */
 	{1,  6, 2, 0, 3}, /* ENET3_RXD3_SER3_RXD3      */
 	{1,  1, 1, 0, 1}, /* ENET3_TX_EN_SER3_RTS_B    */
 	{1,  9, 2, 0, 3}, /* ENET3_RX_DV_SER3_CTS_B    */
 	{2,  9, 2, 0, 2}, /* ENET3_GRXCLK              */
 	{2, 25, 1, 0, 2}, /* ENET3_GTXCLK              */

 	/* UCC_4_RGMII */
 	{2, 16, 2, 0, 3}, /* CLK17 */
 	{1, 12, 1, 0, 2}, /* ENET4_TXD0_SER4_TXD0      */
 	{1, 13, 1, 0, 2}, /* ENET4_TXD1_SER4_TXD1      */
 	{1, 14, 1, 0, 1}, /* ENET4_TXD2_SER4_TXD2      */
 	{1, 15, 1, 0, 2}, /* ENET4_TXD3_SER4_TXD3      */
 	{1, 18, 2, 0, 2}, /* ENET4_RXD0_SER4_RXD0      */
 	{1, 19, 2, 0, 1}, /* ENET4_RXD1_SER4_RXD1      */
 	{1, 20, 2, 0, 1}, /* ENET4_RXD2_SER4_RXD2      */
 	{1, 21, 2, 0, 2}, /* ENET4_RXD3_SER4_RXD3      */
 	{1, 16, 1, 0, 2}, /* ENET4_TX_EN_SER4_RTS_B    */
 	{1, 24, 2, 0, 3}, /* ENET4_RX_DV_SER4_CTS_B    */
 	{2, 17, 2, 0, 2}, /* ENET4_GRXCLK              */
 	{2, 24, 1, 0, 2}, /* ENET4_GTXCLK              */

 #elif defined(CONFIG_SYS_UCC_RMII_MODE)
 	/* UCC_1_RMII */
 	{2, 15, 2, 0, 1}, /* CLK16 */
 	{0,  0, 1, 0, 3}, /* ENET1_TXD0_SER1_TXD0      */
 	{0,  1, 1, 0, 3}, /* ENET1_TXD1_SER1_TXD1      */
 	{0,  6, 2, 0, 3}, /* ENET1_RXD0_SER1_RXD0      */
 	{0,  7, 2, 0, 1}, /* ENET1_RXD1_SER1_RXD1      */
 	{0,  4, 1, 0, 2}, /* ENET1_TX_EN_SER1_RTS_B    */
 	{0, 12, 2, 0, 3}, /* ENET1_RX_DV_SER1_CTS_B    */

 	/* UCC_2_RMII */
 	{2, 15, 2, 0, 1}, /* CLK16 */
 	{0, 14, 1, 0, 2}, /* ENET2_TXD0_SER2_TXD0      */
 	{0, 15, 1, 0, 2}, /* ENET2_TXD1_SER2_TXD1      */
 	{0, 20, 2, 0, 2}, /* ENET2_RXD0_SER2_RXD0      */
 	{0, 21, 2, 0, 1}, /* ENET2_RXD1_SER2_RXD1      */
 	{0, 18, 1, 0, 2}, /* ENET2_TX_EN_SER2_RTS_B    */
 	{0, 26, 2, 0, 3}, /* ENET2_RX_DV_SER2_CTS_B    */

 	/* UCC_3_RMII */
 	{2, 15, 2, 0, 1}, /* CLK16 */
 	{0, 29, 1, 0, 2}, /* ENET3_TXD0_SER3_TXD0      */
 	{0, 30, 1, 0, 3}, /* ENET3_TXD1_SER3_TXD1      */
 	{1,  3, 2, 0, 3}, /* ENET3_RXD0_SER3_RXD0      */
 	{1,  4, 2, 0, 1}, /* ENET3_RXD1_SER3_RXD1      */
 	{1,  1, 1, 0, 1}, /* ENET3_TX_EN_SER3_RTS_B    */
 	{1,  9, 2, 0, 3}, /* ENET3_RX_DV_SER3_CTS_B    */

 	/* UCC_4_RMII */
 	{2, 15, 2, 0, 1}, /* CLK16 */
 	{1, 12, 1, 0, 2}, /* ENET4_TXD0_SER4_TXD0      */
 	{1, 13, 1, 0, 2}, /* ENET4_TXD1_SER4_TXD1      */
 	{1, 18, 2, 0, 2}, /* ENET4_RXD0_SER4_RXD0      */
 	{1, 19, 2, 0, 1}, /* ENET4_RXD1_SER4_RXD1      */
 	{1, 16, 1, 0, 2}, /* ENET4_TX_EN_SER4_RTS_B    */
 	{1, 24, 2, 0, 3}, /* ENET4_RX_DV_SER4_CTS_B    */
 #endif

 	/* UART1 is muxed with QE PortF bit [9-12].*/
 	{5, 12, 2, 0, 3}, /* UART1_SIN */
 	{5, 9,  1, 0, 3}, /* UART1_SOUT */
 	{5, 10, 2, 0, 3}, /* UART1_CTS_B */
 	{5, 11, 1, 0, 2}, /* UART1_RTS_B */

 	{0,  0, 0, 0, QE_IOP_TAB_END} /* END of table */
 };

 void local_bus_init(void);

 int board_early_init_f (void)
 {
 	/*
 	 * Initialize local bus.
 	 */
 	local_bus_init ();

 	enable_8569mds_flash_write();

 #ifdef CONFIG_QE
 	enable_8569mds_qe_uec();
 #endif

 #if CONFIG_SYS_I2C2_OFFSET
 	/* Enable I2C2 signals instead of SD signals */
 	volatile struct ccsr_gur *gur;
 	gur = (struct ccsr_gur *)(CONFIG_SYS_IMMR + 0xe0000);
 	gur->plppar1 &= ~PLPPAR1_I2C_BIT_MASK;
 	gur->plppar1 |= PLPPAR1_I2C2_VAL;
 	gur->plpdir1 &= ~PLPDIR1_I2C_BIT_MASK;
 	gur->plpdir1 |= PLPDIR1_I2C2_VAL;

 	disable_8569mds_brd_eeprom_write_protect();
 #endif

 	return 0;
 }

 int checkboard (void)
 {
 	printf ("Board: 8569 MDS\n");

 	return 0;
 }

 phys_size_t
 initdram(int board_type)
 {
 	long dram_size = 0;

 	puts("Initializing\n");

 #if defined(CONFIG_DDR_DLL)
 	/*
 	 * Work around to stabilize DDR DLL MSYNC_IN.
 	 * Errata DDR9 seems to have been fixed.
 	 * This is now the workaround for Errata DDR11:
 	 *    Override DLL = 1, Course Adj = 1, Tap Select = 0
 	 */
 	volatile ccsr_gur_t *gur =
 			(void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);

 	out_be32(&gur->ddrdllcr, 0x81000000);
 	udelay(200);
 #endif

 #ifdef CONFIG_SPD_EEPROM
 	dram_size = fsl_ddr_sdram();
 #else
 	dram_size = fixed_sdram();
 #endif

 	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
 	dram_size *= 0x100000;

 	puts("    DDR: ");
 	return dram_size;
 }

 #if !defined(CONFIG_SPD_EEPROM)
 phys_size_t fixed_sdram(void)
 {
 	volatile ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC85xx_DDR_ADDR;
 	uint d_init;

 	out_be32(&ddr->cs0_bnds, CONFIG_SYS_DDR_CS0_BNDS);
 	out_be32(&ddr->cs0_config, CONFIG_SYS_DDR_CS0_CONFIG);
 	out_be32(&ddr->timing_cfg_3, CONFIG_SYS_DDR_TIMING_3);
 	out_be32(&ddr->timing_cfg_0, CONFIG_SYS_DDR_TIMING_0);
 	out_be32(&ddr->timing_cfg_1, CONFIG_SYS_DDR_TIMING_1);
 	out_be32(&ddr->timing_cfg_2, CONFIG_SYS_DDR_TIMING_2);
 	out_be32(&ddr->sdram_cfg, CONFIG_SYS_DDR_SDRAM_CFG);
 	out_be32(&ddr->sdram_cfg_2, CONFIG_SYS_DDR_SDRAM_CFG_2);
 	out_be32(&ddr->sdram_mode, CONFIG_SYS_DDR_SDRAM_MODE);
 	out_be32(&ddr->sdram_mode_2, CONFIG_SYS_DDR_SDRAM_MODE_2);
 	out_be32(&ddr->sdram_interval, CONFIG_SYS_DDR_SDRAM_INTERVAL);
 	out_be32(&ddr->sdram_data_init, CONFIG_SYS_DDR_DATA_INIT);
 	out_be32(&ddr->sdram_clk_cntl, CONFIG_SYS_DDR_SDRAM_CLK_CNTL);
 	out_be32(&ddr->timing_cfg_4, CONFIG_SYS_DDR_TIMING_4);
 	out_be32(&ddr->timing_cfg_5, CONFIG_SYS_DDR_TIMING_5);
 	out_be32(&ddr->ddr_zq_cntl, CONFIG_SYS_DDR_ZQ_CNTL);
 	out_be32(&ddr->ddr_wrlvl_cntl, CONFIG_SYS_DDR_WRLVL_CNTL);
 	out_be32(&ddr->sdram_cfg_2, CONFIG_SYS_DDR_SDRAM_CFG_2);
 #if defined (CONFIG_DDR_ECC)
 	out_be32(&ddr->err_int_en, CONFIG_SYS_DDR_ERR_INT_EN);
 	out_be32(&ddr->err_disable, CONFIG_SYS_DDR_ERR_DIS);
 	out_be32(&ddr->err_sbe, CONFIG_SYS_DDR_SBE);
 #endif
 	udelay(500);

 	out_be32(&ddr->sdram_cfg, CONFIG_SYS_DDR_CONTROL);
 #if defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
 	d_init = 1;
 	debug("DDR - 1st controller: memory initializing\n");
 	/*
 	 * Poll until memory is initialized.
 	 * 512 Meg at 400 might hit this 200 times or so.
 	 */
 	while ((ddr->sdram_cfg_2 & (d_init << 4)) != 0) {
 		udelay(1000);
 	}
 	debug("DDR: memory initialized\n\n");
 	udelay(500);
 #endif
 	return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
 }
 #endif

 /*
  * Initialize Local Bus
  */
 void
 local_bus_init(void)
 {
 	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);

 	uint clkdiv;
 	uint lbc_hz;
 	sys_info_t sysinfo;

 	get_sys_info(&sysinfo);
 	clkdiv = (lbc->lcrr & LCRR_CLKDIV) * 2;
 	lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;

 	out_be32(&gur->lbiuiplldcr1, 0x00078080);
 	if (clkdiv == 16)
 		out_be32(&gur->lbiuiplldcr0, 0x7c0f1bf0);
 	else if (clkdiv == 8)
 		out_be32(&gur->lbiuiplldcr0, 0x6c0f1bf0);
 	else if (clkdiv == 4)
 		out_be32(&gur->lbiuiplldcr0, 0x5c0f1bf0);

 	out_be32(&lbc->lcrr, (u32)in_be32(&lbc->lcrr)| 0x00030000);
 }

 #ifdef CONFIG_PCIE1
 static struct pci_controller pcie1_hose;
 #endif  /* CONFIG_PCIE1 */

 int first_free_busno = 0;

 #ifdef CONFIG_PCI
 void
 pci_init_board(void)
 {
 	volatile ccsr_gur_t *gur;
 	uint io_sel;
 	uint host_agent;

 	gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 	io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
 	host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16;

 #ifdef CONFIG_PCIE1
 {
 	volatile ccsr_fsl_pci_t *pci;
 	struct pci_controller *hose;
 	int pcie_ep;
 	struct pci_region *r;
 	int pcie_configured;

 	pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR;
 	hose = &pcie1_hose;
 	pcie_ep =  (host_agent == 0) || (host_agent == 2 ) || (host_agent == 3);
 	r = hose->regions;
 	pcie_configured  = io_sel >= 1;

 	if (pcie_configured && !(gur->devdisr & MPC85xx_DEVDISR_PCIE)){
 		printf ("\n    PCIE connected to slot as %s (base address %x)",
 			pcie_ep ? "End Point" : "Root Complex",
 			(uint)pci);

 		if (pci->pme_msg_det) {
 			pci->pme_msg_det = 0xffffffff;
 			debug (" with errors.  Clearing. Now 0x%08x",
 				pci->pme_msg_det);
 		}
 		printf ("\n");

 		/* inbound */
 		r += fsl_pci_setup_inbound_windows(r);

 		/* outbound memory */
 		pci_set_region(r++,
 				CONFIG_SYS_PCIE1_MEM_BUS,
 				CONFIG_SYS_PCIE1_MEM_PHYS,
 				CONFIG_SYS_PCIE1_MEM_SIZE,
 				PCI_REGION_MEM);

 		/* outbound io */
 		pci_set_region(r++,
 				CONFIG_SYS_PCIE1_IO_BUS,
 				CONFIG_SYS_PCIE1_IO_PHYS,
 				CONFIG_SYS_PCIE1_IO_SIZE,
 				PCI_REGION_IO);

 		hose->region_count = r - hose->regions;

 		hose->first_busno=first_free_busno;

 		fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data);
 		printf ("PCIE on bus %02x - %02x\n",
 				hose->first_busno,hose->last_busno);

 		first_free_busno=hose->last_busno+1;

 	} else {
 		printf ("    PCIE: disabled\n");
 	}
 }
 #else
 	gur->devdisr |= MPC85xx_DEVDISR_PCIE; /* disable */
 #endif
 }
 #endif /* CONFIG_PCI */

 #if defined(CONFIG_OF_BOARD_SETUP)
 void ft_board_setup(void *blob, bd_t *bd)
 {
 #if defined(CONFIG_SYS_UCC_RMII_MODE)
 	int nodeoff, off, err;
 	unsigned int val;
 	const u32 *ph;
 	const u32 *index;

 	/* fixup device tree for supporting rmii mode */
 	nodeoff = -1;
 	while ((nodeoff = fdt_node_offset_by_compatible(blob, nodeoff,
 				"ucc_geth")) >= 0) {
 		err = fdt_setprop_string(blob, nodeoff, "tx-clock-name",
 						"clk16");
 		if (err < 0) {
 			printf("WARNING: could not set tx-clock-name %s.\n",
 				fdt_strerror(err));
 			break;
 		}

 		err = fdt_setprop_string(blob, nodeoff, "phy-connection-type",
 					"rmii");
 		if (err < 0) {
 			printf("WARNING: could not set phy-connection-type "
 				"%s.\n", fdt_strerror(err));
 			break;
 		}

 		index = fdt_getprop(blob, nodeoff, "cell-index", 0);
 		if (index == NULL) {
 			printf("WARNING: could not get cell-index of ucc\n");
 			break;
 		}

 		ph = fdt_getprop(blob, nodeoff, "phy-handle", 0);
 		if (ph == NULL) {
 			printf("WARNING: could not get phy-handle of ucc\n");
 			break;
 		}

 		off = fdt_node_offset_by_phandle(blob, *ph);
 		if (off < 0) {
 			printf("WARNING: could not get phy node	%s.\n",
 				fdt_strerror(err));
 			break;
 		}

 		val = 0x7 + *index; /* RMII phy address starts from 0x8 */

 		err = fdt_setprop(blob, off, "reg", &val, sizeof(u32));
 		if (err < 0) {
 			printf("WARNING: could not set reg for phy-handle "
 				"%s.\n", fdt_strerror(err));
 			break;
 		}
 	}
 #endif
 	ft_cpu_setup(blob, bd);

 #ifdef CONFIG_PCIE1
 	ft_fsl_pci_setup(blob, "pci1", &pcie1_hose);
 #endif
 }
 #endif
	/*
	* Copyright 2009 Freescale Semiconductor.
	*
	* (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
	*
	* See file CREDITS for list of people who contributed to this
	* project.
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License as
	* published by the Free Software Foundation; either version 2 of
	* the License, or (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	* MA 02111-1307 USA
	*/

	#include <common.h>
	#include <pci.h>
	#include <asm/processor.h>
	#include <asm/mmu.h>
	#include <asm/immap_85xx.h>
	#include <asm/fsl_pci.h>
	#include <asm/fsl_ddr_sdram.h>
	#include <asm/io.h>
	#include <spd_sdram.h>
	#include <i2c.h>
	#include <ioports.h>
	#include <libfdt.h>
	#include <fdt_support.h>

	#include "bcsr.h"

	phys_size_t fixed_sdram(void);

	const qe_iop_conf_t qe_iop_conf_tab[] = {
	/* QE_MUX_MDC */
	{2, 31, 1, 0, 1}, /* QE_MUX_MDC */

	/* QE_MUX_MDIO */
	{2, 30, 3, 0, 2}, /* QE_MUX_MDIO */

	#if defined(CONFIG_SYS_UCC_RGMII_MODE)
	/* UCC_1_RGMII */
	{2, 11, 2, 0, 1}, /* CLK12 */
	{0, 0, 1, 0, 3}, /* ENET1_TXD0_SER1_TXD0 */
	{0, 1, 1, 0, 3}, /* ENET1_TXD1_SER1_TXD1 */
	{0, 2, 1, 0, 1}, /* ENET1_TXD2_SER1_TXD2 */
	{0, 3, 1, 0, 2}, /* ENET1_TXD3_SER1_TXD3 */
	{0, 6, 2, 0, 3}, /* ENET1_RXD0_SER1_RXD0 */
	{0, 7, 2, 0, 1}, /* ENET1_RXD1_SER1_RXD1 */
	{0, 8, 2, 0, 2}, /* ENET1_RXD2_SER1_RXD2 */
	{0, 9, 2, 0, 2}, /* ENET1_RXD3_SER1_RXD3 */
	{0, 4, 1, 0, 2}, /* ENET1_TX_EN_SER1_RTS_B */
	{0, 12, 2, 0, 3}, /* ENET1_RX_DV_SER1_CTS_B */
	{2, 8, 2, 0, 1}, /* ENET1_GRXCLK */
	{2, 20, 1, 0, 2}, /* ENET1_GTXCLK */

	/* UCC_2_RGMII */
	{2, 16, 2, 0, 3}, /* CLK17 */
	{0, 14, 1, 0, 2}, /* ENET2_TXD0_SER2_TXD0 */
	{0, 15, 1, 0, 2}, /* ENET2_TXD1_SER2_TXD1 */
	{0, 16, 1, 0, 1}, /* ENET2_TXD2_SER2_TXD2 */
	{0, 17, 1, 0, 1}, /* ENET2_TXD3_SER2_TXD3 */
	{0, 20, 2, 0, 2}, /* ENET2_RXD0_SER2_RXD0 */
	{0, 21, 2, 0, 1}, /* ENET2_RXD1_SER2_RXD1 */
	{0, 22, 2, 0, 1}, /* ENET2_RXD2_SER2_RXD2 */
	{0, 23, 2, 0, 1}, /* ENET2_RXD3_SER2_RXD3 */
	{0, 18, 1, 0, 2}, /* ENET2_TX_EN_SER2_RTS_B */
	{0, 26, 2, 0, 3}, /* ENET2_RX_DV_SER2_CTS_B */
	{2, 3, 2, 0, 1}, /* ENET2_GRXCLK */
	{2, 2, 1, 0, 2}, /* ENET2_GTXCLK */

	/* UCC_3_RGMII */
	{2, 11, 2, 0, 1}, /* CLK12 */
	{0, 29, 1, 0, 2}, /* ENET3_TXD0_SER3_TXD0 */
	{0, 30, 1, 0, 3}, /* ENET3_TXD1_SER3_TXD1 */
	{0, 31, 1, 0, 2}, /* ENET3_TXD2_SER3_TXD2 */
	{1, 0, 1, 0, 3}, /* ENET3_TXD3_SER3_TXD3 */
	{1, 3, 2, 0, 3}, /* ENET3_RXD0_SER3_RXD0 */
	{1, 4, 2, 0, 1}, /* ENET3_RXD1_SER3_RXD1 */
	{1, 5, 2, 0, 2}, /* ENET3_RXD2_SER3_RXD2 */
	{1, 6, 2, 0, 3}, /* ENET3_RXD3_SER3_RXD3 */
	{1, 1, 1, 0, 1}, /* ENET3_TX_EN_SER3_RTS_B */
	{1, 9, 2, 0, 3}, /* ENET3_RX_DV_SER3_CTS_B */
	{2, 9, 2, 0, 2}, /* ENET3_GRXCLK */
	{2, 25, 1, 0, 2}, /* ENET3_GTXCLK */

	/* UCC_4_RGMII */
	{2, 16, 2, 0, 3}, /* CLK17 */
	{1, 12, 1, 0, 2}, /* ENET4_TXD0_SER4_TXD0 */
	{1, 13, 1, 0, 2}, /* ENET4_TXD1_SER4_TXD1 */
	{1, 14, 1, 0, 1}, /* ENET4_TXD2_SER4_TXD2 */
	{1, 15, 1, 0, 2}, /* ENET4_TXD3_SER4_TXD3 */
	{1, 18, 2, 0, 2}, /* ENET4_RXD0_SER4_RXD0 */
	{1, 19, 2, 0, 1}, /* ENET4_RXD1_SER4_RXD1 */
	{1, 20, 2, 0, 1}, /* ENET4_RXD2_SER4_RXD2 */
	{1, 21, 2, 0, 2}, /* ENET4_RXD3_SER4_RXD3 */
	{1, 16, 1, 0, 2}, /* ENET4_TX_EN_SER4_RTS_B */
	{1, 24, 2, 0, 3}, /* ENET4_RX_DV_SER4_CTS_B */
	{2, 17, 2, 0, 2}, /* ENET4_GRXCLK */
	{2, 24, 1, 0, 2}, /* ENET4_GTXCLK */

	#elif defined(CONFIG_SYS_UCC_RMII_MODE)
	/* UCC_1_RMII */
	{2, 15, 2, 0, 1}, /* CLK16 */
	{0, 0, 1, 0, 3}, /* ENET1_TXD0_SER1_TXD0 */
	{0, 1, 1, 0, 3}, /* ENET1_TXD1_SER1_TXD1 */
	{0, 6, 2, 0, 3}, /* ENET1_RXD0_SER1_RXD0 */
	{0, 7, 2, 0, 1}, /* ENET1_RXD1_SER1_RXD1 */
	{0, 4, 1, 0, 2}, /* ENET1_TX_EN_SER1_RTS_B */
	{0, 12, 2, 0, 3}, /* ENET1_RX_DV_SER1_CTS_B */

	/* UCC_2_RMII */
	{2, 15, 2, 0, 1}, /* CLK16 */
	{0, 14, 1, 0, 2}, /* ENET2_TXD0_SER2_TXD0 */
	{0, 15, 1, 0, 2}, /* ENET2_TXD1_SER2_TXD1 */
	{0, 20, 2, 0, 2}, /* ENET2_RXD0_SER2_RXD0 */
	{0, 21, 2, 0, 1}, /* ENET2_RXD1_SER2_RXD1 */
	{0, 18, 1, 0, 2}, /* ENET2_TX_EN_SER2_RTS_B */
	{0, 26, 2, 0, 3}, /* ENET2_RX_DV_SER2_CTS_B */

	/* UCC_3_RMII */
	{2, 15, 2, 0, 1}, /* CLK16 */
	{0, 29, 1, 0, 2}, /* ENET3_TXD0_SER3_TXD0 */
	{0, 30, 1, 0, 3}, /* ENET3_TXD1_SER3_TXD1 */
	{1, 3, 2, 0, 3}, /* ENET3_RXD0_SER3_RXD0 */
	{1, 4, 2, 0, 1}, /* ENET3_RXD1_SER3_RXD1 */
	{1, 1, 1, 0, 1}, /* ENET3_TX_EN_SER3_RTS_B */
	{1, 9, 2, 0, 3}, /* ENET3_RX_DV_SER3_CTS_B */

	/* UCC_4_RMII */
	{2, 15, 2, 0, 1}, /* CLK16 */
	{1, 12, 1, 0, 2}, /* ENET4_TXD0_SER4_TXD0 */
	{1, 13, 1, 0, 2}, /* ENET4_TXD1_SER4_TXD1 */
	{1, 18, 2, 0, 2}, /* ENET4_RXD0_SER4_RXD0 */
	{1, 19, 2, 0, 1}, /* ENET4_RXD1_SER4_RXD1 */
	{1, 16, 1, 0, 2}, /* ENET4_TX_EN_SER4_RTS_B */
	{1, 24, 2, 0, 3}, /* ENET4_RX_DV_SER4_CTS_B */
	#endif

	/* UART1 is muxed with QE PortF bit [9-12].*/
	{5, 12, 2, 0, 3}, /* UART1_SIN */
	{5, 9, 1, 0, 3}, /* UART1_SOUT */
	{5, 10, 2, 0, 3}, /* UART1_CTS_B */
	{5, 11, 1, 0, 2}, /* UART1_RTS_B */

	{0, 0, 0, 0, QE_IOP_TAB_END} /* END of table */
	};

	void local_bus_init(void);

	int board_early_init_f (void)
	{
	/*
	* Initialize local bus.
	*/
	local_bus_init ();

	enable_8569mds_flash_write();

	#ifdef CONFIG_QE
	enable_8569mds_qe_uec();
	#endif

	#if CONFIG_SYS_I2C2_OFFSET
	/* Enable I2C2 signals instead of SD signals */
	volatile struct ccsr_gur *gur;
	gur = (struct ccsr_gur *)(CONFIG_SYS_IMMR + 0xe0000);
	gur->plppar1 &= ~PLPPAR1_I2C_BIT_MASK;
	gur->plppar1 \|= PLPPAR1_I2C2_VAL;
	gur->plpdir1 &= ~PLPDIR1_I2C_BIT_MASK;
	gur->plpdir1 \|= PLPDIR1_I2C2_VAL;

	disable_8569mds_brd_eeprom_write_protect();
	#endif

	return 0;
	}

	int checkboard (void)
	{
	printf ("Board: 8569 MDS\n");

	return 0;
	}

	phys_size_t
	initdram(int board_type)
	{
	long dram_size = 0;

	puts("Initializing\n");

	#if defined(CONFIG_DDR_DLL)
	/*
	* Work around to stabilize DDR DLL MSYNC_IN.
	* Errata DDR9 seems to have been fixed.
	* This is now the workaround for Errata DDR11:
	* Override DLL = 1, Course Adj = 1, Tap Select = 0
	*/
	volatile ccsr_gur_t *gur =
	(void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);

	out_be32(&gur->ddrdllcr, 0x81000000);
	udelay(200);
	#endif

	#ifdef CONFIG_SPD_EEPROM
	dram_size = fsl_ddr_sdram();
	#else
	dram_size = fixed_sdram();
	#endif

	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
	dram_size *= 0x100000;

	puts(" DDR: ");
	return dram_size;
	}

	#if !defined(CONFIG_SPD_EEPROM)
	phys_size_t fixed_sdram(void)
	{
	volatile ccsr_ddr_t ddr = (ccsr_ddr_t )CONFIG_SYS_MPC85xx_DDR_ADDR;
	uint d_init;

	out_be32(&ddr->cs0_bnds, CONFIG_SYS_DDR_CS0_BNDS);
	out_be32(&ddr->cs0_config, CONFIG_SYS_DDR_CS0_CONFIG);
	out_be32(&ddr->timing_cfg_3, CONFIG_SYS_DDR_TIMING_3);
	out_be32(&ddr->timing_cfg_0, CONFIG_SYS_DDR_TIMING_0);
	out_be32(&ddr->timing_cfg_1, CONFIG_SYS_DDR_TIMING_1);
	out_be32(&ddr->timing_cfg_2, CONFIG_SYS_DDR_TIMING_2);
	out_be32(&ddr->sdram_cfg, CONFIG_SYS_DDR_SDRAM_CFG);
	out_be32(&ddr->sdram_cfg_2, CONFIG_SYS_DDR_SDRAM_CFG_2);
	out_be32(&ddr->sdram_mode, CONFIG_SYS_DDR_SDRAM_MODE);
	out_be32(&ddr->sdram_mode_2, CONFIG_SYS_DDR_SDRAM_MODE_2);
	out_be32(&ddr->sdram_interval, CONFIG_SYS_DDR_SDRAM_INTERVAL);
	out_be32(&ddr->sdram_data_init, CONFIG_SYS_DDR_DATA_INIT);
	out_be32(&ddr->sdram_clk_cntl, CONFIG_SYS_DDR_SDRAM_CLK_CNTL);
	out_be32(&ddr->timing_cfg_4, CONFIG_SYS_DDR_TIMING_4);
	out_be32(&ddr->timing_cfg_5, CONFIG_SYS_DDR_TIMING_5);
	out_be32(&ddr->ddr_zq_cntl, CONFIG_SYS_DDR_ZQ_CNTL);
	out_be32(&ddr->ddr_wrlvl_cntl, CONFIG_SYS_DDR_WRLVL_CNTL);
	out_be32(&ddr->sdram_cfg_2, CONFIG_SYS_DDR_SDRAM_CFG_2);
	#if defined (CONFIG_DDR_ECC)
	out_be32(&ddr->err_int_en, CONFIG_SYS_DDR_ERR_INT_EN);
	out_be32(&ddr->err_disable, CONFIG_SYS_DDR_ERR_DIS);
	out_be32(&ddr->err_sbe, CONFIG_SYS_DDR_SBE);
	#endif
	udelay(500);

	out_be32(&ddr->sdram_cfg, CONFIG_SYS_DDR_CONTROL);
	#if defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
	d_init = 1;
	debug("DDR - 1st controller: memory initializing\n");
	/*
	* Poll until memory is initialized.
	* 512 Meg at 400 might hit this 200 times or so.
	*/
	while ((ddr->sdram_cfg_2 & (d_init << 4)) != 0) {
	udelay(1000);
	}
	debug("DDR: memory initialized\n\n");
	udelay(500);
	#endif
	return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
	}
	#endif

	/*
	* Initialize Local Bus
	*/
	void
	local_bus_init(void)
	{
	volatile ccsr_gur_t gur = (void )(CONFIG_SYS_MPC85xx_GUTS_ADDR);
	volatile ccsr_lbc_t lbc = (void )(CONFIG_SYS_MPC85xx_LBC_ADDR);

	uint clkdiv;
	uint lbc_hz;
	sys_info_t sysinfo;

	get_sys_info(&sysinfo);
	clkdiv = (lbc->lcrr & LCRR_CLKDIV) * 2;
	lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;

	out_be32(&gur->lbiuiplldcr1, 0x00078080);
	if (clkdiv == 16)
	out_be32(&gur->lbiuiplldcr0, 0x7c0f1bf0);
	else if (clkdiv == 8)
	out_be32(&gur->lbiuiplldcr0, 0x6c0f1bf0);
	else if (clkdiv == 4)
	out_be32(&gur->lbiuiplldcr0, 0x5c0f1bf0);

	out_be32(&lbc->lcrr, (u32)in_be32(&lbc->lcrr)\| 0x00030000);
	}

	#ifdef CONFIG_PCIE1
	static struct pci_controller pcie1_hose;
	#endif /* CONFIG_PCIE1 */

	int first_free_busno = 0;

	#ifdef CONFIG_PCI
	void
	pci_init_board(void)
	{
	volatile ccsr_gur_t *gur;
	uint io_sel;
	uint host_agent;

	gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
	io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
	host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16;

	#ifdef CONFIG_PCIE1
	{
	volatile ccsr_fsl_pci_t *pci;
	struct pci_controller *hose;
	int pcie_ep;
	struct pci_region *r;
	int pcie_configured;

	pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR;
	hose = &pcie1_hose;
	pcie_ep = (host_agent == 0) \|\| (host_agent == 2 ) \|\| (host_agent == 3);
	r = hose->regions;
	pcie_configured = io_sel >= 1;

	if (pcie_configured && !(gur->devdisr & MPC85xx_DEVDISR_PCIE)){
	printf ("\n PCIE connected to slot as %s (base address %x)",
	pcie_ep ? "End Point" : "Root Complex",
	(uint)pci);

	if (pci->pme_msg_det) {
	pci->pme_msg_det = 0xffffffff;
	debug (" with errors. Clearing. Now 0x%08x",
	pci->pme_msg_det);
	}
	printf ("\n");

	/* inbound */
	r += fsl_pci_setup_inbound_windows(r);

	/* outbound memory */
	pci_set_region(r++,
	CONFIG_SYS_PCIE1_MEM_BUS,
	CONFIG_SYS_PCIE1_MEM_PHYS,
	CONFIG_SYS_PCIE1_MEM_SIZE,
	PCI_REGION_MEM);

	/* outbound io */
	pci_set_region(r++,
	CONFIG_SYS_PCIE1_IO_BUS,
	CONFIG_SYS_PCIE1_IO_PHYS,
	CONFIG_SYS_PCIE1_IO_SIZE,
	PCI_REGION_IO);

	hose->region_count = r - hose->regions;

	hose->first_busno=first_free_busno;

	fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data);
	printf ("PCIE on bus %02x - %02x\n",
	hose->first_busno,hose->last_busno);

	first_free_busno=hose->last_busno+1;

	} else {
	printf (" PCIE: disabled\n");
	}
	}
	#else
	gur->devdisr \|= MPC85xx_DEVDISR_PCIE; /* disable */
	#endif
	}
	#endif /* CONFIG_PCI */

	#if defined(CONFIG_OF_BOARD_SETUP)
	void ft_board_setup(void blob, bd_t bd)
	{
	#if defined(CONFIG_SYS_UCC_RMII_MODE)
	int nodeoff, off, err;
	unsigned int val;
	const u32 *ph;
	const u32 *index;

	/* fixup device tree for supporting rmii mode */
	nodeoff = -1;
	while ((nodeoff = fdt_node_offset_by_compatible(blob, nodeoff,
	"ucc_geth")) >= 0) {
	err = fdt_setprop_string(blob, nodeoff, "tx-clock-name",
	"clk16");
	if (err < 0) {
	printf("WARNING: could not set tx-clock-name %s.\n",
	fdt_strerror(err));
	break;
	}

	err = fdt_setprop_string(blob, nodeoff, "phy-connection-type",
	"rmii");
	if (err < 0) {
	printf("WARNING: could not set phy-connection-type "
	"%s.\n", fdt_strerror(err));
	break;
	}

	index = fdt_getprop(blob, nodeoff, "cell-index", 0);
	if (index == NULL) {
	printf("WARNING: could not get cell-index of ucc\n");
	break;
	}

	ph = fdt_getprop(blob, nodeoff, "phy-handle", 0);
	if (ph == NULL) {
	printf("WARNING: could not get phy-handle of ucc\n");
	break;
	}

	off = fdt_node_offset_by_phandle(blob, *ph);
	if (off < 0) {
	printf("WARNING: could not get phy node %s.\n",
	fdt_strerror(err));
	break;
	}

	val = 0x7 + index; / RMII phy address starts from 0x8 */

	err = fdt_setprop(blob, off, "reg", &val, sizeof(u32));
	if (err < 0) {
	printf("WARNING: could not set reg for phy-handle "
	"%s.\n", fdt_strerror(err));
	break;
	}
	}
	#endif
	ft_cpu_setup(blob, bd);

	#ifdef CONFIG_PCIE1
	ft_fsl_pci_setup(blob, "pci1", &pcie1_hose);
	#endif
	}
	#endif