| /* |
| * (C) Copyright 2008 |
| * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@gmail.com |
| * This work has been supported by: QTechnology http://qtec.com/ |
| * Based on interrupts.c Wolfgang Denk-DENX Software Engineering-wd@denx.de |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| #include <common.h> |
| #include <watchdog.h> |
| #include <command.h> |
| #include <asm/processor.h> |
| #include <asm/interrupt.h> |
| #include <asm/ppc4xx.h> |
| #include <ppc_asm.tmpl> |
| #include <asm/io.h> |
| #include <asm/xilinx_irq.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| void pic_enable(void) |
| { |
| debug("Xilinx PIC at 0x%8x\n", intc); |
| |
| /* |
| * Disable all external interrupts until they are |
| * explicitly requested. |
| */ |
| out_be32((u32 *) IER, 0); |
| |
| /* Acknowledge any pending interrupts just in case. */ |
| out_be32((u32 *) IAR, 0xffffffff); |
| |
| /* Turn on the Master Enable. */ |
| out_be32((u32 *) MER, 0x3UL); |
| |
| return; |
| } |
| |
| int xilinx_pic_irq_get(void) |
| { |
| u32 irq; |
| irq = in_be32((u32 *) IVR); |
| |
| /* If no interrupt is pending then all bits of the IVR are set to 1. As |
| * the IVR is as many bits wide as numbers of inputs are available. |
| * Therefore, if all bits of the IVR are set to one, its content will |
| * be bigger than XPAR_INTC_MAX_NUM_INTR_INPUTS. |
| */ |
| if (irq >= XPAR_INTC_MAX_NUM_INTR_INPUTS) |
| irq = -1; /* report no pending interrupt. */ |
| |
| debug("get_irq: %d\n", irq); |
| return (irq); |
| } |
| |
| void pic_irq_enable(unsigned int irq) |
| { |
| u32 mask = IRQ_MASK(irq); |
| debug("enable: %d\n", irq); |
| out_be32((u32 *) SIE, mask); |
| } |
| |
| void pic_irq_disable(unsigned int irq) |
| { |
| u32 mask = IRQ_MASK(irq); |
| debug("disable: %d\n", irq); |
| out_be32((u32 *) CIE, mask); |
| } |
| |
| void pic_irq_ack(unsigned int irq) |
| { |
| u32 mask = IRQ_MASK(irq); |
| debug("ack: %d\n", irq); |
| out_be32((u32 *) IAR, mask); |
| } |
| |
| void external_interrupt(struct pt_regs *regs) |
| { |
| int irq; |
| |
| irq = xilinx_pic_irq_get(); |
| if (irq < 0) |
| return; |
| |
| interrupt_run_handler(irq); |
| |
| return; |
| } |