ARM: Added I2S0 clocks for audio
This patch makes the necessary changes for making use of
I2S0 channel instead of I2S1 channel on smdk board. This
changes are done to maintain the uniformity to use I2S0 channel.
Signed-off-by: Dani Krishna Mohan <krishna.md@samsung.com>
diff --git a/arch/arm/cpu/armv7/exynos/clock.c b/arch/arm/cpu/armv7/exynos/clock.c
index 0cb1a61..36fedd6 100644
--- a/arch/arm/cpu/armv7/exynos/clock.c
+++ b/arch/arm/cpu/armv7/exynos/clock.c
@@ -282,6 +282,9 @@
src = readl(&clk->src_peric0);
div = readl(&clk->div_peric3);
break;
+ case PERIPH_ID_I2S0:
+ src = readl(&clk->src_mau);
+ div = readl(&clk->div_mau);
case PERIPH_ID_SPI0:
case PERIPH_ID_SPI1:
src = readl(&clk->src_peric1);
@@ -1146,17 +1149,29 @@
return 0;
}
-void exynos5_set_i2s_clk_source(void)
+int exynos5_set_i2s_clk_source(unsigned int i2s_id)
{
struct exynos5_clock *clk =
(struct exynos5_clock *)samsung_get_base_clock();
+ unsigned int *audio_ass = (unsigned int *)samsung_get_base_audio_ass();
- clrsetbits_le32(&clk->src_peric1, AUDIO1_SEL_MASK,
- (CLK_SRC_SCLK_EPLL));
+ if (i2s_id == 0) {
+ setbits_le32(&clk->src_top2, CLK_SRC_MOUT_EPLL);
+ clrsetbits_le32(&clk->src_mau, AUDIO0_SEL_MASK,
+ (CLK_SRC_SCLK_EPLL));
+ setbits_le32(audio_ass, AUDIO_CLKMUX_ASS);
+ } else if (i2s_id == 1) {
+ clrsetbits_le32(&clk->src_peric1, AUDIO1_SEL_MASK,
+ (CLK_SRC_SCLK_EPLL));
+ } else {
+ return -1;
+ }
+ return 0;
}
int exynos5_set_i2s_clk_prescaler(unsigned int src_frq,
- unsigned int dst_frq)
+ unsigned int dst_frq,
+ unsigned int i2s_id)
{
struct exynos5_clock *clk =
(struct exynos5_clock *)samsung_get_base_clock();
@@ -1169,13 +1184,27 @@
}
div = (src_frq / dst_frq);
- if (div > AUDIO_1_RATIO_MASK) {
- debug("%s: Frequency ratio is out of range\n", __func__);
- debug("src frq = %d des frq = %d ", src_frq, dst_frq);
+ if (i2s_id == 0) {
+ if (div > AUDIO_0_RATIO_MASK) {
+ debug("%s: Frequency ratio is out of range\n",
+ __func__);
+ debug("src frq = %d des frq = %d ", src_frq, dst_frq);
+ return -1;
+ }
+ clrsetbits_le32(&clk->div_mau, AUDIO_0_RATIO_MASK,
+ (div & AUDIO_0_RATIO_MASK));
+ } else if(i2s_id == 1) {
+ if (div > AUDIO_1_RATIO_MASK) {
+ debug("%s: Frequency ratio is out of range\n",
+ __func__);
+ debug("src frq = %d des frq = %d ", src_frq, dst_frq);
+ return -1;
+ }
+ clrsetbits_le32(&clk->div_peric4, AUDIO_1_RATIO_MASK,
+ (div & AUDIO_1_RATIO_MASK));
+ } else {
return -1;
}
- clrsetbits_le32(&clk->div_peric4, AUDIO_1_RATIO_MASK,
- (div & AUDIO_1_RATIO_MASK));
return 0;
}
@@ -1415,19 +1444,21 @@
return 0;
}
-int set_i2s_clk_prescaler(unsigned int src_frq, unsigned int dst_frq)
+int set_i2s_clk_prescaler(unsigned int src_frq, unsigned int dst_frq,
+ unsigned int i2s_id)
{
-
if (cpu_is_exynos5())
- return exynos5_set_i2s_clk_prescaler(src_frq, dst_frq);
+ return exynos5_set_i2s_clk_prescaler(src_frq, dst_frq, i2s_id);
else
return 0;
}
-void set_i2s_clk_source(void)
+int set_i2s_clk_source(unsigned int i2s_id)
{
if (cpu_is_exynos5())
- exynos5_set_i2s_clk_source();
+ return exynos5_set_i2s_clk_source(i2s_id);
+ else
+ return 0;
}
int set_epll_clk(unsigned long rate)
diff --git a/arch/arm/cpu/armv7/exynos/pinmux.c b/arch/arm/cpu/armv7/exynos/pinmux.c
index 1b05ebf..8002bce 100644
--- a/arch/arm/cpu/armv7/exynos/pinmux.c
+++ b/arch/arm/cpu/armv7/exynos/pinmux.c
@@ -220,10 +220,20 @@
{
int i;
struct exynos5_gpio_part1 *gpio1 =
- (struct exynos5_gpio_part1 *) samsung_get_base_gpio_part1();
+ (struct exynos5_gpio_part1 *)samsung_get_base_gpio_part1();
+ struct exynos5_gpio_part4 *gpio4 =
+ (struct exynos5_gpio_part4 *)samsung_get_base_gpio_part4();
- for (i = 0; i < 5; i++)
- s5p_gpio_cfg_pin(&gpio1->b0, i, GPIO_FUNC(0x02));
+ switch (peripheral) {
+ case PERIPH_ID_I2S0:
+ for (i = 0; i < 5; i++)
+ s5p_gpio_cfg_pin(&gpio4->z, i, GPIO_FUNC(0x02));
+ break;
+ case PERIPH_ID_I2S1:
+ for (i = 0; i < 5; i++)
+ s5p_gpio_cfg_pin(&gpio1->b0, i, GPIO_FUNC(0x02));
+ break;
+ }
}
void exynos5_spi_config(int peripheral)
@@ -296,6 +306,7 @@
case PERIPH_ID_I2C7:
exynos5_i2c_config(peripheral, flags);
break;
+ case PERIPH_ID_I2S0:
case PERIPH_ID_I2S1:
exynos5_i2s_config(peripheral);
break;
@@ -463,11 +474,11 @@
int exynos_pinmux_config(int peripheral, int flags)
{
- if (cpu_is_exynos5())
+ if (cpu_is_exynos5()) {
return exynos5_pinmux_config(peripheral, flags);
- else if (cpu_is_exynos4())
+ } else if (cpu_is_exynos4()) {
return exynos4_pinmux_config(peripheral, flags);
- else {
+ } else {
debug("pinmux functionality not supported\n");
return -1;
}