ARM: Added I2S0 clocks for audio
This patch makes the necessary changes for making use of
I2S0 channel instead of I2S1 channel on smdk board. This
changes are done to maintain the uniformity to use I2S0 channel.
Signed-off-by: Dani Krishna Mohan <krishna.md@samsung.com>
diff --git a/arch/arm/cpu/armv7/exynos/clock.c b/arch/arm/cpu/armv7/exynos/clock.c
index 0cb1a61..36fedd6 100644
--- a/arch/arm/cpu/armv7/exynos/clock.c
+++ b/arch/arm/cpu/armv7/exynos/clock.c
@@ -282,6 +282,9 @@
src = readl(&clk->src_peric0);
div = readl(&clk->div_peric3);
break;
+ case PERIPH_ID_I2S0:
+ src = readl(&clk->src_mau);
+ div = readl(&clk->div_mau);
case PERIPH_ID_SPI0:
case PERIPH_ID_SPI1:
src = readl(&clk->src_peric1);
@@ -1146,17 +1149,29 @@
return 0;
}
-void exynos5_set_i2s_clk_source(void)
+int exynos5_set_i2s_clk_source(unsigned int i2s_id)
{
struct exynos5_clock *clk =
(struct exynos5_clock *)samsung_get_base_clock();
+ unsigned int *audio_ass = (unsigned int *)samsung_get_base_audio_ass();
- clrsetbits_le32(&clk->src_peric1, AUDIO1_SEL_MASK,
- (CLK_SRC_SCLK_EPLL));
+ if (i2s_id == 0) {
+ setbits_le32(&clk->src_top2, CLK_SRC_MOUT_EPLL);
+ clrsetbits_le32(&clk->src_mau, AUDIO0_SEL_MASK,
+ (CLK_SRC_SCLK_EPLL));
+ setbits_le32(audio_ass, AUDIO_CLKMUX_ASS);
+ } else if (i2s_id == 1) {
+ clrsetbits_le32(&clk->src_peric1, AUDIO1_SEL_MASK,
+ (CLK_SRC_SCLK_EPLL));
+ } else {
+ return -1;
+ }
+ return 0;
}
int exynos5_set_i2s_clk_prescaler(unsigned int src_frq,
- unsigned int dst_frq)
+ unsigned int dst_frq,
+ unsigned int i2s_id)
{
struct exynos5_clock *clk =
(struct exynos5_clock *)samsung_get_base_clock();
@@ -1169,13 +1184,27 @@
}
div = (src_frq / dst_frq);
- if (div > AUDIO_1_RATIO_MASK) {
- debug("%s: Frequency ratio is out of range\n", __func__);
- debug("src frq = %d des frq = %d ", src_frq, dst_frq);
+ if (i2s_id == 0) {
+ if (div > AUDIO_0_RATIO_MASK) {
+ debug("%s: Frequency ratio is out of range\n",
+ __func__);
+ debug("src frq = %d des frq = %d ", src_frq, dst_frq);
+ return -1;
+ }
+ clrsetbits_le32(&clk->div_mau, AUDIO_0_RATIO_MASK,
+ (div & AUDIO_0_RATIO_MASK));
+ } else if(i2s_id == 1) {
+ if (div > AUDIO_1_RATIO_MASK) {
+ debug("%s: Frequency ratio is out of range\n",
+ __func__);
+ debug("src frq = %d des frq = %d ", src_frq, dst_frq);
+ return -1;
+ }
+ clrsetbits_le32(&clk->div_peric4, AUDIO_1_RATIO_MASK,
+ (div & AUDIO_1_RATIO_MASK));
+ } else {
return -1;
}
- clrsetbits_le32(&clk->div_peric4, AUDIO_1_RATIO_MASK,
- (div & AUDIO_1_RATIO_MASK));
return 0;
}
@@ -1415,19 +1444,21 @@
return 0;
}
-int set_i2s_clk_prescaler(unsigned int src_frq, unsigned int dst_frq)
+int set_i2s_clk_prescaler(unsigned int src_frq, unsigned int dst_frq,
+ unsigned int i2s_id)
{
-
if (cpu_is_exynos5())
- return exynos5_set_i2s_clk_prescaler(src_frq, dst_frq);
+ return exynos5_set_i2s_clk_prescaler(src_frq, dst_frq, i2s_id);
else
return 0;
}
-void set_i2s_clk_source(void)
+int set_i2s_clk_source(unsigned int i2s_id)
{
if (cpu_is_exynos5())
- exynos5_set_i2s_clk_source();
+ return exynos5_set_i2s_clk_source(i2s_id);
+ else
+ return 0;
}
int set_epll_clk(unsigned long rate)
diff --git a/arch/arm/cpu/armv7/exynos/pinmux.c b/arch/arm/cpu/armv7/exynos/pinmux.c
index 1b05ebf..8002bce 100644
--- a/arch/arm/cpu/armv7/exynos/pinmux.c
+++ b/arch/arm/cpu/armv7/exynos/pinmux.c
@@ -220,10 +220,20 @@
{
int i;
struct exynos5_gpio_part1 *gpio1 =
- (struct exynos5_gpio_part1 *) samsung_get_base_gpio_part1();
+ (struct exynos5_gpio_part1 *)samsung_get_base_gpio_part1();
+ struct exynos5_gpio_part4 *gpio4 =
+ (struct exynos5_gpio_part4 *)samsung_get_base_gpio_part4();
- for (i = 0; i < 5; i++)
- s5p_gpio_cfg_pin(&gpio1->b0, i, GPIO_FUNC(0x02));
+ switch (peripheral) {
+ case PERIPH_ID_I2S0:
+ for (i = 0; i < 5; i++)
+ s5p_gpio_cfg_pin(&gpio4->z, i, GPIO_FUNC(0x02));
+ break;
+ case PERIPH_ID_I2S1:
+ for (i = 0; i < 5; i++)
+ s5p_gpio_cfg_pin(&gpio1->b0, i, GPIO_FUNC(0x02));
+ break;
+ }
}
void exynos5_spi_config(int peripheral)
@@ -296,6 +306,7 @@
case PERIPH_ID_I2C7:
exynos5_i2c_config(peripheral, flags);
break;
+ case PERIPH_ID_I2S0:
case PERIPH_ID_I2S1:
exynos5_i2s_config(peripheral);
break;
@@ -463,11 +474,11 @@
int exynos_pinmux_config(int peripheral, int flags)
{
- if (cpu_is_exynos5())
+ if (cpu_is_exynos5()) {
return exynos5_pinmux_config(peripheral, flags);
- else if (cpu_is_exynos4())
+ } else if (cpu_is_exynos4()) {
return exynos4_pinmux_config(peripheral, flags);
- else {
+ } else {
debug("pinmux functionality not supported\n");
return -1;
}
diff --git a/arch/arm/include/asm/arch-exynos/clk.h b/arch/arm/include/asm/arch-exynos/clk.h
index 71075bd..1d6fa93 100644
--- a/arch/arm/include/asm/arch-exynos/clk.h
+++ b/arch/arm/include/asm/arch-exynos/clk.h
@@ -31,8 +31,9 @@
unsigned long get_lcd_clk(void);
void set_lcd_clk(void);
void set_mipi_clk(void);
-void set_i2s_clk_source(void);
-int set_i2s_clk_prescaler(unsigned int src_frq, unsigned int dst_frq);
+int set_i2s_clk_source(unsigned int i2s_id);
+int set_i2s_clk_prescaler(unsigned int src_frq, unsigned int dst_frq,
+ unsigned int i2s_id);
int set_epll_clk(unsigned long rate);
int set_spi_clk(int periph_id, unsigned int rate);
diff --git a/arch/arm/include/asm/arch-exynos/clock.h b/arch/arm/include/asm/arch-exynos/clock.h
index 2b97b9a..cf26eef 100644
--- a/arch/arm/include/asm/arch-exynos/clock.h
+++ b/arch/arm/include/asm/arch-exynos/clock.h
@@ -876,8 +876,12 @@
#define AUDIO_0_RATIO_MASK 0x0f
#define AUDIO_1_RATIO_MASK 0x0f
+#define AUDIO0_SEL_MASK 0xf
#define AUDIO1_SEL_MASK 0xf
+
#define CLK_SRC_SCLK_EPLL 0x7
+#define CLK_SRC_MOUT_EPLL (1<<12)
+#define AUDIO_CLKMUX_ASS (1<<0)
/* CON0 bit-fields */
#define EPLL_CON0_MDIV_MASK 0x1ff
diff --git a/arch/arm/include/asm/arch-exynos/cpu.h b/arch/arm/include/asm/arch-exynos/cpu.h
index cb924fb..4b67191 100644
--- a/arch/arm/include/asm/arch-exynos/cpu.h
+++ b/arch/arm/include/asm/arch-exynos/cpu.h
@@ -50,6 +50,7 @@
#define EXYNOS4_SPI_ISP_BASE DEVICE_NOT_AVAILABLE
#define EXYNOS4_ACE_SFR_BASE DEVICE_NOT_AVAILABLE
#define EXYNOS4_DMC_PHY_BASE DEVICE_NOT_AVAILABLE
+#define EXYNOS4_AUDIOSS_BASE DEVICE_NOT_AVAILABLE
/* EXYNOS4X12 */
#define EXYNOS4X12_GPIO_PART3_BASE 0x03860000
@@ -85,10 +86,12 @@
#define EXYNOS4X12_SPI_ISP_BASE DEVICE_NOT_AVAILABLE
#define EXYNOS4X12_ACE_SFR_BASE DEVICE_NOT_AVAILABLE
#define EXYNOS4X12_DMC_PHY_BASE DEVICE_NOT_AVAILABLE
+#define EXYNOS4X12_AUDIOSS_BASE DEVICE_NOT_AVAILABLE
/* EXYNOS5 Common*/
#define EXYNOS5_I2C_SPACING 0x10000
+#define EXYNOS5_AUDIOSS_BASE 0x03810000
#define EXYNOS5_GPIO_PART4_BASE 0x03860000
#define EXYNOS5_PRO_ID 0x10000000
#define EXYNOS5_CLOCK_BASE 0x10010000
@@ -226,6 +229,7 @@
SAMSUNG_BASE(tzpc, TZPC_BASE)
SAMSUNG_BASE(dmc_ctrl, DMC_CTRL_BASE)
SAMSUNG_BASE(dmc_phy, DMC_PHY_BASE)
+SAMSUNG_BASE(audio_ass, AUDIOSS_BASE)
#endif
#endif /* _EXYNOS4_CPU_H */
diff --git a/arch/arm/include/asm/arch-exynos/periph.h b/arch/arm/include/asm/arch-exynos/periph.h
index 9952155..64bd8b7 100644
--- a/arch/arm/include/asm/arch-exynos/periph.h
+++ b/arch/arm/include/asm/arch-exynos/periph.h
@@ -34,6 +34,7 @@
PERIPH_ID_SDMMC1,
PERIPH_ID_SDMMC2,
PERIPH_ID_SDMMC3,
+ PERIPH_ID_I2S0 = 98,
PERIPH_ID_I2S1 = 99,
/* Since following peripherals do