| /* |
| * Copyright 2008 Freescale Semiconductor, Inc. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * Version 2 as published by the Free Software Foundation. |
| */ |
| |
| #include <common.h> |
| #include <asm/fsl_law.h> |
| |
| #include "ddr.h" |
| |
| unsigned int fsl_ddr_get_mem_data_rate(void); |
| |
| /* |
| * Round mclk_ps to nearest 10 ps in memory controller code. |
| * |
| * If an imprecise data rate is too high due to rounding error |
| * propagation, compute a suitably rounded mclk_ps to compute |
| * a working memory controller configuration. |
| */ |
| unsigned int get_memory_clk_period_ps(void) |
| { |
| unsigned int mclk_ps; |
| |
| mclk_ps = 2000000000000ULL / fsl_ddr_get_mem_data_rate(); |
| /* round to nearest 10 ps */ |
| return 10 * ((mclk_ps + 5) / 10); |
| } |
| |
| /* Convert picoseconds into DRAM clock cycles (rounding up if needed). */ |
| unsigned int picos_to_mclk(unsigned int picos) |
| { |
| const unsigned long long ULL_2e12 = 2000000000000ULL; |
| const unsigned long long ULL_8Fs = 0xFFFFFFFFULL; |
| unsigned long long clks; |
| unsigned long long clks_temp; |
| |
| if (!picos) |
| return 0; |
| |
| clks = fsl_ddr_get_mem_data_rate() * (unsigned long long) picos; |
| clks_temp = clks; |
| clks = clks / ULL_2e12; |
| if (clks_temp % ULL_2e12) { |
| clks++; |
| } |
| |
| if (clks > ULL_8Fs) { |
| clks = ULL_8Fs; |
| } |
| |
| return (unsigned int) clks; |
| } |
| |
| unsigned int mclk_to_picos(unsigned int mclk) |
| { |
| return get_memory_clk_period_ps() * mclk; |
| } |
| |
| void |
| __fsl_ddr_set_lawbar(const common_timing_params_t *memctl_common_params, |
| unsigned int memctl_interleaved, |
| unsigned int ctrl_num) |
| { |
| unsigned long long base = memctl_common_params->base_address; |
| unsigned long long size = memctl_common_params->total_mem; |
| |
| /* |
| * If no DIMMs on this controller, do not proceed any further. |
| */ |
| if (!memctl_common_params->ndimms_present) { |
| return; |
| } |
| |
| #if !defined(CONFIG_PHYS_64BIT) |
| if (base >= CONFIG_MAX_MEM_MAPPED) |
| return; |
| if ((base + size) >= CONFIG_MAX_MEM_MAPPED) |
| size = CONFIG_MAX_MEM_MAPPED - base; |
| #endif |
| |
| if (ctrl_num == 0) { |
| /* |
| * Set up LAW for DDR controller 1 space. |
| */ |
| unsigned int lawbar1_target_id = memctl_interleaved |
| ? LAW_TRGT_IF_DDR_INTRLV : LAW_TRGT_IF_DDR_1; |
| |
| if (set_ddr_laws(base, size, lawbar1_target_id) < 0) { |
| printf("%s: ERROR (ctrl #0, intrlv=%d)\n", __func__, |
| memctl_interleaved); |
| return ; |
| } |
| } else if (ctrl_num == 1) { |
| if (set_ddr_laws(base, size, LAW_TRGT_IF_DDR_2) < 0) { |
| printf("%s: ERROR (ctrl #1)\n", __func__); |
| return ; |
| } |
| } else { |
| printf("%s: unexpected DDR controller number (%u)\n", __func__, |
| ctrl_num); |
| } |
| } |
| |
| __attribute__((weak, alias("__fsl_ddr_set_lawbar"))) void |
| fsl_ddr_set_lawbar(const common_timing_params_t *memctl_common_params, |
| unsigned int memctl_interleaved, |
| unsigned int ctrl_num); |
| |
| void board_add_ram_info(int use_default) |
| { |
| #if defined(CONFIG_MPC85xx) |
| volatile ccsr_ddr_t *ddr = (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR); |
| #elif defined(CONFIG_MPC86xx) |
| volatile ccsr_ddr_t *ddr = (void *)(CONFIG_SYS_MPC86xx_DDR_ADDR); |
| #endif |
| #if (CONFIG_NUM_DDR_CONTROLLERS > 1) |
| uint32_t cs0_config = in_be32(&ddr->cs0_config); |
| #endif |
| uint32_t sdram_cfg = in_be32(&ddr->sdram_cfg); |
| int cas_lat; |
| |
| puts(" (DDR"); |
| switch ((sdram_cfg & SDRAM_CFG_SDRAM_TYPE_MASK) >> |
| SDRAM_CFG_SDRAM_TYPE_SHIFT) { |
| case SDRAM_TYPE_DDR1: |
| puts("1"); |
| break; |
| case SDRAM_TYPE_DDR2: |
| puts("2"); |
| break; |
| case SDRAM_TYPE_DDR3: |
| puts("3"); |
| break; |
| default: |
| puts("?"); |
| break; |
| } |
| |
| if (sdram_cfg & SDRAM_CFG_32_BE) |
| puts(", 32-bit"); |
| else |
| puts(", 64-bit"); |
| |
| /* Calculate CAS latency based on timing cfg values */ |
| cas_lat = ((in_be32(&ddr->timing_cfg_1) >> 16) & 0xf) + 1; |
| if ((in_be32(&ddr->timing_cfg_3) >> 12) & 1) |
| cas_lat += (8 << 1); |
| printf(", CL=%d", cas_lat >> 1); |
| if (cas_lat & 0x1) |
| puts(".5"); |
| |
| if (sdram_cfg & SDRAM_CFG_ECC_EN) |
| puts(", ECC on)"); |
| else |
| puts(", ECC off)"); |
| |
| #if (CONFIG_NUM_DDR_CONTROLLERS > 1) |
| if (cs0_config & 0x20000000) { |
| puts("\n"); |
| puts(" DDR Controller Interleaving Mode: "); |
| |
| switch ((cs0_config >> 24) & 0xf) { |
| case FSL_DDR_CACHE_LINE_INTERLEAVING: |
| puts("cache line"); |
| break; |
| case FSL_DDR_PAGE_INTERLEAVING: |
| puts("page"); |
| break; |
| case FSL_DDR_BANK_INTERLEAVING: |
| puts("bank"); |
| break; |
| case FSL_DDR_SUPERBANK_INTERLEAVING: |
| puts("super-bank"); |
| break; |
| default: |
| puts("invalid"); |
| break; |
| } |
| } |
| #endif |
| |
| if ((sdram_cfg >> 8) & 0x7f) { |
| puts("\n"); |
| puts(" DDR Chip-Select Interleaving Mode: "); |
| switch(sdram_cfg >> 8 & 0x7f) { |
| case FSL_DDR_CS0_CS1_CS2_CS3: |
| puts("CS0+CS1+CS2+CS3"); |
| break; |
| case FSL_DDR_CS0_CS1: |
| puts("CS0+CS1"); |
| break; |
| case FSL_DDR_CS2_CS3: |
| puts("CS2+CS3"); |
| break; |
| case FSL_DDR_CS0_CS1_AND_CS2_CS3: |
| puts("CS0+CS1 and CS2+CS3"); |
| break; |
| default: |
| puts("invalid"); |
| break; |
| } |
| } |
| } |