| CONFIG_ARM=y |
| CONFIG_SYS_VENDOR="opalkelly" |
| CONFIG_SYS_CONFIG_NAME="syzygy_hub" |
| CONFIG_SPL_SYS_DCACHE_OFF=y |
| CONFIG_SYS_L2CACHE_OFF=y |
| CONFIG_ARCH_ZYNQ=y |
| CONFIG_SYS_TEXT_BASE=0x4000000 |
| CONFIG_DM_GPIO=y |
| CONFIG_DEFAULT_DEVICE_TREE="zynq-syzygy-hub" |
| CONFIG_SPL_STACK_R_ADDR=0x200000 |
| CONFIG_SPL=y |
| CONFIG_DEBUG_UART_BASE=0xe0000000 |
| CONFIG_DEBUG_UART_CLOCK=50000000 |
| CONFIG_ZYNQ_MAC_IN_EEPROM=y |
| CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0xFA |
| CONFIG_SYS_LOAD_ADDR=0x0 |
| CONFIG_DEBUG_UART=y |
| CONFIG_DISTRO_DEFAULTS=y |
| CONFIG_REMAKE_ELF=y |
| CONFIG_SYS_CUSTOM_LDSCRIPT=y |
| CONFIG_SYS_LDSCRIPT="arch/arm/mach-zynq/u-boot.lds" |
| CONFIG_FIT=y |
| CONFIG_FIT_SIGNATURE=y |
| CONFIG_FIT_VERBOSE=y |
| CONFIG_LEGACY_IMAGE_FORMAT=y |
| CONFIG_USE_PREBOOT=y |
| CONFIG_CLOCKS=y |
| CONFIG_SPL_MAX_SIZE=0x30000 |
| CONFIG_SPL_HAS_BSS_LINKER_SECTION=y |
| CONFIG_SPL_BSS_START_ADDR=0x100000 |
| CONFIG_SPL_BSS_MAX_SIZE=0x100000 |
| # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set |
| CONFIG_SPL_STACK=0xfffffe00 |
| CONFIG_SPL_STACK_R=y |
| CONFIG_SPL_FS_LOAD_ARGS_NAME="system.dtb" |
| CONFIG_SPL_OS_BOOT=y |
| CONFIG_SPL_FALCON_BOOT_MMCSD=y |
| CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x0 |
| CONFIG_SYS_MAXARGS=32 |
| CONFIG_SYS_PBSIZE=2071 |
| CONFIG_CMD_FPGA_LOADBP=y |
| CONFIG_CMD_FPGA_LOADFS=y |
| CONFIG_CMD_FPGA_LOADMK=y |
| CONFIG_CMD_FPGA_LOADP=y |
| CONFIG_CMD_GPIO=y |
| CONFIG_CMD_I2C=y |
| CONFIG_CMD_MMC=y |
| CONFIG_CMD_USB=y |
| # CONFIG_CMD_SETEXPR is not set |
| CONFIG_BOOTP_MAY_FAIL=y |
| CONFIG_CMD_TFTPPUT=y |
| CONFIG_CMD_CACHE=y |
| CONFIG_CMD_EXT4_WRITE=y |
| CONFIG_ENV_OVERWRITE=y |
| CONFIG_SYS_RELOC_GD_ENV_ADDR=y |
| CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y |
| CONFIG_SPL_DM_SEQ_ALIAS=y |
| CONFIG_FPGA_XILINX=y |
| CONFIG_FPGA_ZYNQPL=y |
| CONFIG_DM_I2C=y |
| CONFIG_SYS_I2C_CADENCE=y |
| CONFIG_MMC_SDHCI=y |
| CONFIG_MMC_SDHCI_ZYNQ=y |
| CONFIG_PHY_MARVELL=y |
| CONFIG_PHY_REALTEK=y |
| CONFIG_PHY_XILINX=y |
| CONFIG_MII=y |
| CONFIG_ZYNQ_GEM=y |
| CONFIG_DEBUG_UART_ZYNQ=y |
| CONFIG_ARM_DCC=y |
| CONFIG_ZYNQ_SERIAL=y |
| CONFIG_USB=y |
| CONFIG_USB_EHCI_HCD=y |
| CONFIG_USB_ULPI_VIEWPORT=y |
| CONFIG_USB_ULPI=y |
| CONFIG_USB_GADGET=y |
| CONFIG_USB_GADGET_MANUFACTURER="Xilinx" |
| CONFIG_USB_GADGET_VENDOR_NUM=0x03FD |
| CONFIG_USB_GADGET_PRODUCT_NUM=0x0300 |
| CONFIG_CI_UDC=y |
| CONFIG_USB_GADGET_DOWNLOAD=y |
| CONFIG_USB_FUNCTION_THOR=y |