| # |
| # SPDX-License-Identifier: GPL-2.0+ |
| # |
| |
| obj-$(CONFIG_$(SPL_)DM) += core/ |
| obj-$(CONFIG_$(SPL_)CLK) += clk/ |
| obj-$(CONFIG_$(SPL_)LED) += led/ |
| obj-$(CONFIG_$(SPL_)PINCTRL) += pinctrl/ |
| obj-$(CONFIG_$(SPL_)RAM) += ram/ |
| |
| ifdef CONFIG_SPL_BUILD |
| |
| obj-$(CONFIG_SPL_CPU_SUPPORT) += cpu/ |
| obj-$(CONFIG_SPL_CRYPTO_SUPPORT) += crypto/ |
| obj-$(CONFIG_SPL_I2C_SUPPORT) += i2c/ |
| obj-$(CONFIG_SPL_GPIO_SUPPORT) += gpio/ |
| obj-$(CONFIG_SPL_MMC_SUPPORT) += mmc/ |
| obj-$(CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT) += ddr/fsl/ |
| obj-$(CONFIG_ARMADA_38X) += ddr/marvell/a38x/ |
| obj-$(CONFIG_ARMADA_XP) += ddr/marvell/axp/ |
| obj-$(CONFIG_ALTERA_SDRAM) += ddr/altera/ |
| obj-$(CONFIG_SPL_SERIAL_SUPPORT) += serial/ |
| obj-$(CONFIG_SPL_SPI_SUPPORT) += spi/ |
| obj-$(CONFIG_SPL_POWER_SUPPORT) += power/ power/pmic/ |
| obj-$(CONFIG_SPL_POWER_SUPPORT) += power/regulator/ |
| obj-$(CONFIG_SPL_DRIVERS_MISC_SUPPORT) += misc/ sysreset/ |
| obj-$(CONFIG_SPL_MTD_SUPPORT) += mtd/ |
| obj-$(CONFIG_SPL_NAND_SUPPORT) += mtd/nand/ |
| obj-$(CONFIG_SPL_ONENAND_SUPPORT) += mtd/onenand/ |
| obj-$(CONFIG_SPL_SPI_FLASH_SUPPORT) += mtd/spi/ |
| obj-$(CONFIG_SPL_UBI) += mtd/ubispl/ |
| obj-$(CONFIG_SPL_DMA_SUPPORT) += dma/ |
| obj-$(CONFIG_SPL_ETH_SUPPORT) += net/ |
| obj-$(CONFIG_SPL_ETH_SUPPORT) += net/phy/ |
| obj-$(CONFIG_SPL_USBETH_SUPPORT) += net/phy/ |
| obj-$(CONFIG_SPL_PCI_SUPPORT) += pci/ |
| obj-$(CONFIG_SPL_MUSB_NEW_SUPPORT) += usb/musb-new/ |
| obj-$(CONFIG_SPL_USB_GADGET_SUPPORT) += usb/gadget/ |
| obj-$(CONFIG_SPL_USB_GADGET_SUPPORT) += usb/gadget/udc/ |
| obj-$(CONFIG_SPL_DFU_SUPPORT) += dfu/ |
| obj-$(CONFIG_SPL_WATCHDOG_SUPPORT) += watchdog/ |
| obj-$(CONFIG_SPL_USB_HOST_SUPPORT) += usb/host/ |
| obj-$(CONFIG_OMAP_USB_PHY) += usb/phy/ |
| obj-$(CONFIG_SPL_SATA_SUPPORT) += block/ |
| obj-$(CONFIG_SPL_USB_HOST_SUPPORT) += block/ |
| obj-$(CONFIG_SPL_MMC_SUPPORT) += block/ |
| endif |
| |
| ifdef CONFIG_TPL_BUILD |
| |
| obj-$(CONFIG_TPL_I2C_SUPPORT) += i2c/ |
| obj-$(CONFIG_TPL_DRIVERS_MISC_SUPPORT) += misc/ sysreset/ |
| obj-$(CONFIG_TPL_MMC_SUPPORT) += mmc/ |
| obj-$(CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT) += ddr/fsl/ |
| obj-$(CONFIG_TPL_NAND_SUPPORT) += mtd/nand/ |
| obj-$(CONFIG_TPL_SERIAL_SUPPORT) += serial/ |
| obj-$(CONFIG_TPL_SPI_FLASH_SUPPORT) += mtd/spi/ |
| obj-$(CONFIG_TPL_SPI_SUPPORT) += spi/ |
| |
| endif |
| |
| ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_TPL_BUILD),) |
| |
| obj-y += adc/ |
| obj-$(CONFIG_DM_DEMO) += demo/ |
| obj-$(CONFIG_BIOSEMU) += bios_emulator/ |
| obj-y += block/ |
| obj-$(CONFIG_BOOTCOUNT_LIMIT) += bootcount/ |
| obj-$(CONFIG_CPU) += cpu/ |
| obj-y += crypto/ |
| obj-$(CONFIG_FPGA) += fpga/ |
| obj-y += hwmon/ |
| obj-y += misc/ |
| obj-y += pcmcia/ |
| obj-y += dfu/ |
| obj-$(CONFIG_X86) += pch/ |
| obj-y += phy/marvell/ |
| obj-y += rtc/ |
| obj-y += sound/ |
| obj-y += spmi/ |
| obj-y += sysreset/ |
| obj-y += timer/ |
| obj-y += tpm/ |
| obj-y += twserial/ |
| obj-y += video/ |
| obj-y += watchdog/ |
| obj-$(CONFIG_QE) += qe/ |
| obj-$(CONFIG_U_QE) += qe/ |
| obj-y += mailbox/ |
| obj-y += memory/ |
| obj-y += pwm/ |
| obj-y += reset/ |
| obj-y += input/ |
| # SOC specific infrastructure drivers. |
| obj-y += soc/ |
| obj-$(CONFIG_REMOTEPROC) += remoteproc/ |
| obj-y += thermal/ |
| |
| obj-$(CONFIG_MACH_PIC32) += ddr/microchip/ |
| endif |