| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (C) 2018 Marvell International Ltd. |
| */ |
| |
| #include <dm.h> |
| #include <dm/of_access.h> |
| #include <malloc.h> |
| #include <memalign.h> |
| #include <nand.h> |
| #include <pci.h> |
| #include <pci_ids.h> |
| #include <time.h> |
| #include <linux/bitfield.h> |
| #include <linux/ctype.h> |
| #include <linux/delay.h> |
| #include <linux/errno.h> |
| #include <linux/err.h> |
| #include <linux/ioport.h> |
| #include <linux/libfdt.h> |
| #include <linux/mtd/mtd.h> |
| #include <linux/mtd/nand_bch.h> |
| #include <linux/mtd/nand_ecc.h> |
| #include <asm/io.h> |
| #include <asm/types.h> |
| #include <asm/dma-mapping.h> |
| #include <asm/arch/clock.h> |
| #include "octeontx_bch.h" |
| |
| #ifdef DEBUG |
| # undef CONFIG_LOGLEVEL |
| # define CONFIG_LOGLEVEL 8 |
| #endif |
| |
| LIST_HEAD(octeontx_bch_devices); |
| static unsigned int num_vfs = BCH_NR_VF; |
| static void *bch_pf; |
| static void *bch_vf; |
| static void *token; |
| static bool bch_pf_initialized; |
| static bool bch_vf_initialized; |
| |
| static int pci_enable_sriov(struct udevice *dev, int nr_virtfn) |
| { |
| int ret; |
| |
| ret = pci_sriov_init(dev, nr_virtfn); |
| if (ret) |
| printf("%s(%s): pci_sriov_init returned %d\n", __func__, |
| dev->name, ret); |
| return ret; |
| } |
| |
| void *octeontx_bch_getv(void) |
| { |
| if (!bch_vf) |
| return NULL; |
| if (bch_vf_initialized && bch_pf_initialized) |
| return bch_vf; |
| else |
| return NULL; |
| } |
| |
| void octeontx_bch_putv(void *token) |
| { |
| bch_vf_initialized = !!token; |
| bch_vf = token; |
| } |
| |
| void *octeontx_bch_getp(void) |
| { |
| return token; |
| } |
| |
| void octeontx_bch_putp(void *token) |
| { |
| bch_pf = token; |
| bch_pf_initialized = !!token; |
| } |
| |
| static int do_bch_init(struct bch_device *bch) |
| { |
| return 0; |
| } |
| |
| static void bch_reset(struct bch_device *bch) |
| { |
| writeq(1, bch->reg_base + BCH_CTL); |
| mdelay(2); |
| } |
| |
| static void bch_disable(struct bch_device *bch) |
| { |
| writeq(~0ull, bch->reg_base + BCH_ERR_INT_ENA_W1C); |
| writeq(~0ull, bch->reg_base + BCH_ERR_INT); |
| bch_reset(bch); |
| } |
| |
| static u32 bch_check_bist_status(struct bch_device *bch) |
| { |
| return readq(bch->reg_base + BCH_BIST_RESULT); |
| } |
| |
| static int bch_device_init(struct bch_device *bch) |
| { |
| u64 bist; |
| int rc; |
| |
| debug("%s: Resetting...\n", __func__); |
| /* Reset the PF when probed first */ |
| bch_reset(bch); |
| |
| debug("%s: Checking BIST...\n", __func__); |
| /* Check BIST status */ |
| bist = (u64)bch_check_bist_status(bch); |
| if (bist) { |
| dev_err(dev, "BCH BIST failed with code 0x%llx\n", bist); |
| return -ENODEV; |
| } |
| |
| /* Get max VQs/VFs supported by the device */ |
| |
| bch->max_vfs = pci_sriov_get_totalvfs(bch->dev); |
| debug("%s: %d vfs\n", __func__, bch->max_vfs); |
| if (num_vfs > bch->max_vfs) { |
| dev_warn(dev, "Num of VFs to enable %d is greater than max available. Enabling %d VFs.\n", |
| num_vfs, bch->max_vfs); |
| num_vfs = bch->max_vfs; |
| } |
| bch->vfs_enabled = bch->max_vfs; |
| /* Get number of VQs/VFs to be enabled */ |
| /* TODO: Get CLK frequency */ |
| /* Reset device parameters */ |
| |
| debug("%s: Doing initialization\n", __func__); |
| rc = do_bch_init(bch); |
| |
| return rc; |
| } |
| |
| static int bch_sriov_configure(struct udevice *dev, int numvfs) |
| { |
| struct bch_device *bch = dev_get_priv(dev); |
| int ret = -EBUSY; |
| |
| debug("%s(%s, %d), bch: %p, vfs_in_use: %d, enabled: %d\n", __func__, |
| dev->name, numvfs, bch, bch->vfs_in_use, bch->vfs_enabled); |
| if (bch->vfs_in_use) |
| goto exit; |
| |
| ret = 0; |
| |
| if (numvfs > 0) { |
| debug("%s: Enabling sriov\n", __func__); |
| ret = pci_enable_sriov(dev, numvfs); |
| if (ret == 0) { |
| bch->flags |= BCH_FLAG_SRIOV_ENABLED; |
| ret = numvfs; |
| bch->vfs_enabled = numvfs; |
| } |
| } |
| |
| debug("VFs enabled: %d\n", ret); |
| exit: |
| debug("%s: Returning %d\n", __func__, ret); |
| return ret; |
| } |
| |
| static int octeontx_pci_bchpf_probe(struct udevice *dev) |
| { |
| struct bch_device *bch; |
| int ret; |
| |
| debug("%s(%s)\n", __func__, dev->name); |
| bch = dev_get_priv(dev); |
| if (!bch) |
| return -ENOMEM; |
| |
| bch->reg_base = dm_pci_map_bar(dev, PCI_BASE_ADDRESS_0, PCI_REGION_MEM); |
| bch->dev = dev; |
| |
| debug("%s: base address: %p\n", __func__, bch->reg_base); |
| ret = bch_device_init(bch); |
| if (ret) { |
| printf("%s(%s): init returned %d\n", __func__, dev->name, ret); |
| return ret; |
| } |
| INIT_LIST_HEAD(&bch->list); |
| list_add(&bch->list, &octeontx_bch_devices); |
| token = (void *)dev; |
| |
| debug("%s: Configuring SRIOV\n", __func__); |
| bch_sriov_configure(dev, num_vfs); |
| debug("%s: Done.\n", __func__); |
| octeontx_bch_putp(bch); |
| |
| return 0; |
| } |
| |
| static const struct pci_device_id octeontx_bchpf_pci_id_table[] = { |
| { PCI_VDEVICE(CAVIUM, PCI_DEVICE_ID_CAVIUM_BCH) }, |
| {}, |
| }; |
| |
| static const struct pci_device_id octeontx_bchvf_pci_id_table[] = { |
| { PCI_VDEVICE(CAVIUM, PCI_DEVICE_ID_CAVIUM_BCHVF)}, |
| {}, |
| }; |
| |
| /** |
| * Given a data block calculate the ecc data and fill in the response |
| * |
| * @param[in] block 8-byte aligned pointer to data block to calculate ECC |
| * @param block_size Size of block in bytes, must be a multiple of two. |
| * @param bch_level Number of errors that must be corrected. The number of |
| * parity bytes is equal to ((15 * bch_level) + 7) / 8. |
| * Must be 4, 8, 16, 24, 32, 40, 48, 56, 60 or 64. |
| * @param[out] ecc 8-byte aligned pointer to where ecc data should go |
| * @param[in] resp pointer to where responses will be written. |
| * |
| * @return Zero on success, negative on failure. |
| */ |
| int octeontx_bch_encode(struct bch_vf *vf, dma_addr_t block, u16 block_size, |
| u8 bch_level, dma_addr_t ecc, dma_addr_t resp) |
| { |
| union bch_cmd cmd; |
| int rc; |
| |
| memset(&cmd, 0, sizeof(cmd)); |
| cmd.s.cword.ecc_gen = eg_gen; |
| cmd.s.cword.ecc_level = bch_level; |
| cmd.s.cword.size = block_size; |
| |
| cmd.s.oword.ptr = ecc; |
| cmd.s.iword.ptr = block; |
| cmd.s.rword.ptr = resp; |
| rc = octeontx_cmd_queue_write(QID_BCH, 1, |
| sizeof(cmd) / sizeof(uint64_t), cmd.u); |
| if (rc) |
| return -1; |
| |
| octeontx_bch_write_doorbell(1, vf); |
| |
| return 0; |
| } |
| |
| /** |
| * Given a data block and ecc data correct the data block |
| * |
| * @param[in] block_ecc_in 8-byte aligned pointer to data block with ECC |
| * data concatenated to the end to correct |
| * @param block_size Size of block in bytes, must be a multiple of |
| * two. |
| * @param bch_level Number of errors that must be corrected. The |
| * number of parity bytes is equal to |
| * ((15 * bch_level) + 7) / 8. |
| * Must be 4, 8, 16, 24, 32, 40, 48, 56, 60 or 64. |
| * @param[out] block_out 8-byte aligned pointer to corrected data buffer. |
| * This should not be the same as block_ecc_in. |
| * @param[in] resp pointer to where responses will be written. |
| * |
| * @return Zero on success, negative on failure. |
| */ |
| |
| int octeontx_bch_decode(struct bch_vf *vf, dma_addr_t block_ecc_in, |
| u16 block_size, u8 bch_level, |
| dma_addr_t block_out, dma_addr_t resp) |
| { |
| union bch_cmd cmd; |
| int rc; |
| |
| memset(&cmd, 0, sizeof(cmd)); |
| cmd.s.cword.ecc_gen = eg_correct; |
| cmd.s.cword.ecc_level = bch_level; |
| cmd.s.cword.size = block_size; |
| |
| cmd.s.oword.ptr = block_out; |
| cmd.s.iword.ptr = block_ecc_in; |
| cmd.s.rword.ptr = resp; |
| rc = octeontx_cmd_queue_write(QID_BCH, 1, |
| sizeof(cmd) / sizeof(uint64_t), cmd.u); |
| if (rc) |
| return -1; |
| |
| octeontx_bch_write_doorbell(1, vf); |
| return 0; |
| } |
| EXPORT_SYMBOL(octeontx_bch_decode); |
| |
| int octeontx_bch_wait(struct bch_vf *vf, union bch_resp *resp, |
| dma_addr_t handle) |
| { |
| ulong start = get_timer(0); |
| |
| __iormb(); /* HW is updating *resp */ |
| while (!resp->s.done && get_timer(start) < 10) |
| __iormb(); /* HW is updating *resp */ |
| |
| if (resp->s.done) |
| return 0; |
| |
| return -ETIMEDOUT; |
| } |
| |
| struct bch_q octeontx_bch_q[QID_MAX]; |
| |
| static int octeontx_cmd_queue_initialize(struct udevice *dev, int queue_id, |
| int max_depth, int fpa_pool, |
| int pool_size) |
| { |
| /* some params are for later merge with CPT or cn83xx */ |
| struct bch_q *q = &octeontx_bch_q[queue_id]; |
| unsigned long paddr; |
| u64 *chunk_buffer; |
| int chunk = max_depth + 1; |
| int i, size; |
| |
| if ((unsigned int)queue_id >= QID_MAX) |
| return -EINVAL; |
| if (max_depth & chunk) /* must be 2^N - 1 */ |
| return -EINVAL; |
| |
| size = NQS * chunk * sizeof(u64); |
| chunk_buffer = dma_alloc_coherent(size, &paddr); |
| if (!chunk_buffer) |
| return -ENOMEM; |
| |
| q->base_paddr = paddr; |
| q->dev = dev; |
| q->index = 0; |
| q->max_depth = max_depth; |
| q->pool_size_m1 = pool_size; |
| q->base_vaddr = chunk_buffer; |
| |
| for (i = 0; i < NQS; i++) { |
| u64 *ixp; |
| int inext = (i + 1) * chunk - 1; |
| int j = (i + 1) % NQS; |
| int jnext = j * chunk; |
| dma_addr_t jbase = q->base_paddr + jnext * sizeof(u64); |
| |
| ixp = &chunk_buffer[inext]; |
| *ixp = jbase; |
| } |
| |
| return 0; |
| } |
| |
| static int octeontx_pci_bchvf_probe(struct udevice *dev) |
| { |
| struct bch_vf *vf; |
| union bch_vqx_ctl ctl; |
| union bch_vqx_cmd_buf cbuf; |
| int err; |
| |
| debug("%s(%s)\n", __func__, dev->name); |
| vf = dev_get_priv(dev); |
| if (!vf) |
| return -ENOMEM; |
| |
| vf->dev = dev; |
| |
| /* Map PF's configuration registers */ |
| vf->reg_base = dm_pci_map_bar(dev, PCI_BASE_ADDRESS_0, PCI_REGION_MEM); |
| debug("%s: reg base: %p\n", __func__, vf->reg_base); |
| |
| err = octeontx_cmd_queue_initialize(dev, QID_BCH, QDEPTH - 1, 0, |
| sizeof(union bch_cmd) * QDEPTH); |
| if (err) { |
| dev_err(dev, "octeontx_cmd_queue_initialize() failed\n"); |
| goto release; |
| } |
| |
| ctl.u = readq(vf->reg_base + BCH_VQX_CTL(0)); |
| |
| cbuf.u = 0; |
| cbuf.s.ldwb = 1; |
| cbuf.s.dfb = 1; |
| cbuf.s.size = QDEPTH; |
| writeq(cbuf.u, vf->reg_base + BCH_VQX_CMD_BUF(0)); |
| |
| writeq(ctl.u, vf->reg_base + BCH_VQX_CTL(0)); |
| |
| writeq(octeontx_bch_q[QID_BCH].base_paddr, |
| vf->reg_base + BCH_VQX_CMD_PTR(0)); |
| |
| octeontx_bch_putv(vf); |
| |
| debug("%s: bch vf initialization complete\n", __func__); |
| |
| if (octeontx_bch_getv()) |
| return octeontx_pci_nand_deferred_probe(); |
| |
| return -1; |
| |
| release: |
| return err; |
| } |
| |
| static int octeontx_pci_bchpf_remove(struct udevice *dev) |
| { |
| struct bch_device *bch = dev_get_priv(dev); |
| |
| bch_disable(bch); |
| return 0; |
| } |
| |
| U_BOOT_DRIVER(octeontx_pci_bchpf) = { |
| .name = BCHPF_DRIVER_NAME, |
| .id = UCLASS_MISC, |
| .probe = octeontx_pci_bchpf_probe, |
| .remove = octeontx_pci_bchpf_remove, |
| .priv_auto = sizeof(struct bch_device), |
| .flags = DM_FLAG_OS_PREPARE, |
| }; |
| |
| U_BOOT_DRIVER(octeontx_pci_bchvf) = { |
| .name = BCHVF_DRIVER_NAME, |
| .id = UCLASS_MISC, |
| .probe = octeontx_pci_bchvf_probe, |
| .priv_auto = sizeof(struct bch_vf), |
| }; |
| |
| U_BOOT_PCI_DEVICE(octeontx_pci_bchpf, octeontx_bchpf_pci_id_table); |
| U_BOOT_PCI_DEVICE(octeontx_pci_bchvf, octeontx_bchvf_pci_id_table); |