| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * dts file for Xilinx ZynqMP SM-K26 rev1/B/A |
| * |
| * (C) Copyright 2020 - 2021, Xilinx, Inc. |
| * |
| * Michal Simek <michal.simek@xilinx.com> |
| */ |
| |
| /dts-v1/; |
| |
| #include "zynqmp.dtsi" |
| #include "zynqmp-clk-ccf.dtsi" |
| #include <dt-bindings/input/input.h> |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/phy/phy.h> |
| #include <dt-bindings/pinctrl/pinctrl-zynqmp.h> |
| |
| / { |
| model = "ZynqMP SM-K26 Rev1/B/A"; |
| compatible = "xlnx,zynqmp-sm-k26-rev1", "xlnx,zynqmp-sm-k26-revB", |
| "xlnx,zynqmp-sm-k26-revA", "xlnx,zynqmp-sm-k26", |
| "xlnx,zynqmp"; |
| |
| aliases { |
| i2c0 = &i2c0; |
| i2c1 = &i2c1; |
| mmc0 = &sdhci0; |
| mmc1 = &sdhci1; |
| nvmem0 = &eeprom; |
| nvmem1 = &eeprom_cc; |
| rtc0 = &rtc; |
| serial0 = &uart0; |
| serial1 = &uart1; |
| serial2 = &dcc; |
| spi0 = &qspi; |
| spi1 = &spi0; |
| spi2 = &spi1; |
| usb0 = &usb0; |
| usb1 = &usb1; |
| }; |
| |
| chosen { |
| bootargs = "earlycon"; |
| stdout-path = "serial1:115200n8"; |
| }; |
| |
| memory@0 { |
| device_type = "memory"; /* 4GB */ |
| reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>; |
| }; |
| |
| reserved-memory { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| pmu_region: pmu@7ff00000 { |
| reg = <0x0 0x7ff00000 0x0 0x100000>; |
| no-map; |
| }; |
| }; |
| |
| gpio-keys { |
| compatible = "gpio-keys"; |
| autorepeat; |
| key-fwuen { |
| label = "fwuen"; |
| gpios = <&gpio 12 GPIO_ACTIVE_LOW>; |
| linux,code = <BTN_MISC>; |
| wakeup-source; |
| autorepeat; |
| }; |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| ds35-led { |
| label = "heartbeat"; |
| gpios = <&gpio 7 GPIO_ACTIVE_HIGH>; |
| linux,default-trigger = "heartbeat"; |
| }; |
| |
| ds36-led { |
| label = "vbus_det"; |
| gpios = <&gpio 8 GPIO_ACTIVE_HIGH>; |
| default-state = "on"; |
| }; |
| }; |
| |
| ams { |
| compatible = "iio-hwmon"; |
| io-channels = <&xilinx_ams 0>, <&xilinx_ams 1>, <&xilinx_ams 2>, |
| <&xilinx_ams 3>, <&xilinx_ams 4>, <&xilinx_ams 5>, |
| <&xilinx_ams 6>, <&xilinx_ams 7>, <&xilinx_ams 8>, |
| <&xilinx_ams 9>, <&xilinx_ams 10>, <&xilinx_ams 11>, |
| <&xilinx_ams 12>, <&xilinx_ams 13>, <&xilinx_ams 14>, |
| <&xilinx_ams 15>, <&xilinx_ams 16>, <&xilinx_ams 17>, |
| <&xilinx_ams 18>, <&xilinx_ams 19>, <&xilinx_ams 20>, |
| <&xilinx_ams 21>, <&xilinx_ams 22>, <&xilinx_ams 23>, |
| <&xilinx_ams 24>, <&xilinx_ams 25>, <&xilinx_ams 26>, |
| <&xilinx_ams 27>, <&xilinx_ams 28>, <&xilinx_ams 29>; |
| }; |
| |
| pwm-fan { |
| compatible = "pwm-fan"; |
| status = "okay"; |
| pwms = <&ttc0 2 40000 0>; |
| }; |
| }; |
| |
| &modepin_gpio { |
| label = "modepin"; |
| }; |
| |
| &ttc0 { |
| status = "okay"; |
| #pwm-cells = <3>; |
| }; |
| |
| &uart1 { /* MIO36/MIO37 */ |
| status = "okay"; |
| }; |
| |
| &pinctrl0 { |
| status = "okay"; |
| pinctrl_sdhci0_default: sdhci0-default { |
| conf { |
| groups = "sdio0_0_grp"; |
| slew-rate = <SLEW_RATE_SLOW>; |
| power-source = <IO_STANDARD_LVCMOS18>; |
| bias-disable; |
| }; |
| |
| mux { |
| groups = "sdio0_0_grp"; |
| function = "sdio0"; |
| }; |
| }; |
| }; |
| |
| &qspi { /* MIO 0-5 - U143 */ |
| status = "okay"; |
| spi_flash: flash@0 { /* MT25QU512A */ |
| compatible = "mt25qu512a", "jedec,spi-nor"; /* 64MB */ |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0>; |
| spi-tx-bus-width = <4>; |
| spi-rx-bus-width = <4>; |
| spi-max-frequency = <40000000>; /* 40MHz */ |
| |
| partitions { |
| compatible = "fixed-partitions"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| partition@0 { |
| label = "Image Selector"; |
| reg = <0x0 0x80000>; /* 512KB */ |
| read-only; |
| lock; |
| }; |
| partition@80000 { |
| label = "Image Selector Golden"; |
| reg = <0x80000 0x80000>; /* 512KB */ |
| read-only; |
| lock; |
| }; |
| partition@100000 { |
| label = "Persistent Register"; |
| reg = <0x100000 0x20000>; /* 128KB */ |
| }; |
| partition@120000 { |
| label = "Persistent Register Backup"; |
| reg = <0x120000 0x20000>; /* 128KB */ |
| }; |
| partition@140000 { |
| label = "Open_1"; |
| reg = <0x140000 0xC0000>; /* 768KB */ |
| }; |
| partition@200000 { |
| label = "Image A (FSBL, PMU, ATF, U-Boot)"; |
| reg = <0x200000 0xD00000>; /* 13MB */ |
| }; |
| partition@f00000 { |
| label = "ImgSel Image A Catch"; |
| reg = <0xF00000 0x80000>; /* 512KB */ |
| read-only; |
| lock; |
| }; |
| partition@f80000 { |
| label = "Image B (FSBL, PMU, ATF, U-Boot)"; |
| reg = <0xF80000 0xD00000>; /* 13MB */ |
| }; |
| partition@1c80000 { |
| label = "ImgSel Image B Catch"; |
| reg = <0x1C80000 0x80000>; /* 512KB */ |
| read-only; |
| lock; |
| }; |
| partition@1d00000 { |
| label = "Open_2"; |
| reg = <0x1D00000 0x100000>; /* 1MB */ |
| }; |
| partition@1e00000 { |
| label = "Recovery Image"; |
| reg = <0x1E00000 0x200000>; /* 2MB */ |
| read-only; |
| lock; |
| }; |
| partition@2000000 { |
| label = "Recovery Image Backup"; |
| reg = <0x2000000 0x200000>; /* 2MB */ |
| read-only; |
| lock; |
| }; |
| partition@2200000 { |
| label = "U-Boot storage variables"; |
| reg = <0x2200000 0x20000>; /* 128KB */ |
| }; |
| partition@2220000 { |
| label = "U-Boot storage variables backup"; |
| reg = <0x2220000 0x20000>; /* 128KB */ |
| }; |
| partition@2240000 { |
| label = "SHA256"; |
| reg = <0x2240000 0x40000>; /* 256B but 256KB sector */ |
| read-only; |
| lock; |
| }; |
| partition@2280000 { |
| label = "Secure OS Storage"; |
| reg = <0x2280000 0x20000>; /* 128KB */ |
| }; |
| partition@22A0000 { |
| label = "User"; |
| reg = <0x22A0000 0x1d60000>; /* 29.375 MB */ |
| }; |
| }; |
| }; |
| }; |
| |
| &sdhci0 { /* MIO13-23 - 16GB emmc MTFC16GAPALBH-IT - U133A */ |
| status = "okay"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_sdhci0_default>; |
| non-removable; |
| disable-wp; |
| bus-width = <8>; |
| xlnx,mio-bank = <0>; |
| assigned-clock-rates = <187498123>; |
| }; |
| |
| &spi1 { /* MIO6, 9-11 */ |
| status = "okay"; |
| label = "TPM"; |
| num-cs = <1>; |
| tpm@0 { /* slm9670 - U144 */ |
| compatible = "infineon,slb9670", "tcg,tpm_tis-spi"; |
| reg = <0>; |
| spi-max-frequency = <18500000>; |
| }; |
| }; |
| |
| &i2c1 { |
| status = "okay"; |
| bootph-all; |
| clock-frequency = <400000>; |
| scl-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>; |
| sda-gpios = <&gpio 25 GPIO_ACTIVE_HIGH>; |
| |
| eeprom: eeprom@50 { /* u46 - also at address 0x58 */ |
| bootph-all; |
| compatible = "st,24c64", "atmel,24c64"; /* st m24c64 */ |
| reg = <0x50>; |
| /* WP pin EE_WP_EN connected to slg7x644092@68 */ |
| }; |
| |
| eeprom_cc: eeprom@51 { /* required by spec - also at address 0x59 */ |
| bootph-all; |
| compatible = "st,24c64", "atmel,24c64"; /* st m24c64 */ |
| reg = <0x51>; |
| }; |
| |
| /* da9062@30 - u170 - also at address 0x31 */ |
| /* da9131@33 - u167 */ |
| da9131: pmic@33 { |
| compatible = "dlg,da9131"; |
| reg = <0x33>; |
| regulators { |
| da9131_buck1: buck1 { |
| regulator-name = "da9131_buck1"; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| da9131_buck2: buck2 { |
| regulator-name = "da9131_buck2"; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| }; |
| }; |
| |
| /* da9130@32 - u166 */ |
| da9130: pmic@32 { |
| compatible = "dlg,da9130"; |
| reg = <0x32>; |
| regulators { |
| da9130_buck1: buck1 { |
| regulator-name = "da9130_buck1"; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| }; |
| }; |
| |
| /* slg7x644091@70 - u168 NOT accessible due to address conflict with stdp4320 */ |
| /* |
| * stdp4320 - u27 FW has below two issues to be fixed in next board revision. |
| * Device acknowledging to addresses 0x5C, 0x5D, 0x70, 0x72, 0x76. |
| * Address conflict with slg7x644091@70 making both the devices NOT accessible. |
| * With the FW fix, stdp4320 should respond to address 0x73 only. |
| */ |
| /* slg7x644092@68 - u169 */ |
| /* Also connected via JA1C as C23/C24 */ |
| }; |
| |
| &gpio { |
| status = "okay"; |
| gpio-line-names = "QSPI_CLK", "QSPI_DQ1", "QSPI_DQ2", "QSPI_DQ3", "QSPI_DQ0", /* 0 - 4 */ |
| "QSPI_CS_B", "SPI_CLK", "LED1", "LED2", "SPI_CS_B", /* 5 - 9 */ |
| "SPI_MISO", "SPI_MOSI", "FWUEN", "EMMC_DAT0", "EMMC_DAT1", /* 10 - 14 */ |
| "EMMC_DAT2", "EMMC_DAT3", "EMMC_DAT4", "EMMC_DAT5", "EMMC_DAT6", /* 15 - 19 */ |
| "EMMC_DAT7", "EMMC_CMD", "EMMC_CLK", "EMMC_RST", "I2C1_SCL", /* 20 - 24 */ |
| "I2C1_SDA", "", "", "", "", /* 25 - 29 */ |
| "", "", "", "", "", /* 30 - 34 */ |
| "", "", "", "", "", /* 35 - 39 */ |
| "", "", "", "", "", /* 40 - 44 */ |
| "", "", "", "", "", /* 45 - 49 */ |
| "", "", "", "", "", /* 50 - 54 */ |
| "", "", "", "", "", /* 55 - 59 */ |
| "", "", "", "", "", /* 60 - 64 */ |
| "", "", "", "", "", /* 65 - 69 */ |
| "", "", "", "", "", /* 70 - 74 */ |
| "", "", "", /* 75 - 77, MIO end and EMIO start */ |
| "", "", /* 78 - 79 */ |
| "", "", "", "", "", /* 80 - 84 */ |
| "", "", "", "", "", /* 85 - 89 */ |
| "", "", "", "", "", /* 90 - 94 */ |
| "", "", "", "", "", /* 95 - 99 */ |
| "", "", "", "", "", /* 100 - 104 */ |
| "", "", "", "", "", /* 105 - 109 */ |
| "", "", "", "", "", /* 110 - 114 */ |
| "", "", "", "", "", /* 115 - 119 */ |
| "", "", "", "", "", /* 120 - 124 */ |
| "", "", "", "", "", /* 125 - 129 */ |
| "", "", "", "", "", /* 130 - 134 */ |
| "", "", "", "", "", /* 135 - 139 */ |
| "", "", "", "", "", /* 140 - 144 */ |
| "", "", "", "", "", /* 145 - 149 */ |
| "", "", "", "", "", /* 150 - 154 */ |
| "", "", "", "", "", /* 155 - 159 */ |
| "", "", "", "", "", /* 160 - 164 */ |
| "", "", "", "", "", /* 165 - 169 */ |
| "", "", "", ""; /* 170 - 174 */ |
| }; |
| |
| &xilinx_ams { |
| status = "okay"; |
| }; |
| |
| &ams_ps { |
| status = "okay"; |
| }; |
| |
| &ams_pl { |
| status = "okay"; |
| }; |
| |
| &zynqmp_dpsub { |
| status = "okay"; |
| }; |
| |
| &rtc { |
| status = "okay"; |
| }; |
| |
| &lpd_dma_chan1 { |
| status = "okay"; |
| }; |
| |
| &lpd_dma_chan2 { |
| status = "okay"; |
| }; |
| |
| &lpd_dma_chan3 { |
| status = "okay"; |
| }; |
| |
| &lpd_dma_chan4 { |
| status = "okay"; |
| }; |
| |
| &lpd_dma_chan5 { |
| status = "okay"; |
| }; |
| |
| &lpd_dma_chan6 { |
| status = "okay"; |
| }; |
| |
| &lpd_dma_chan7 { |
| status = "okay"; |
| }; |
| |
| &lpd_dma_chan8 { |
| status = "okay"; |
| }; |
| |
| &fpd_dma_chan1 { |
| status = "okay"; |
| }; |
| |
| &fpd_dma_chan2 { |
| status = "okay"; |
| }; |
| |
| &fpd_dma_chan3 { |
| status = "okay"; |
| }; |
| |
| &fpd_dma_chan4 { |
| status = "okay"; |
| }; |
| |
| &fpd_dma_chan5 { |
| status = "okay"; |
| }; |
| |
| &fpd_dma_chan6 { |
| status = "okay"; |
| }; |
| |
| &fpd_dma_chan7 { |
| status = "okay"; |
| }; |
| |
| &fpd_dma_chan8 { |
| status = "okay"; |
| }; |
| |
| &gpu { |
| status = "okay"; |
| }; |
| |
| &lpd_watchdog { |
| status = "okay"; |
| }; |
| |
| &watchdog0 { |
| status = "okay"; |
| }; |
| |
| &cpu_opp_table { |
| opp00 { |
| opp-hz = /bits/ 64 <1333333333>; |
| }; |
| opp01 { |
| opp-hz = /bits/ 64 <666666666>; |
| }; |
| opp02 { |
| opp-hz = /bits/ 64 <444444444>; |
| }; |
| opp03 { |
| opp-hz = /bits/ 64 <333333333>; |
| }; |
| }; |