| // SPDX-License-Identifier: GPL-2.0+ |
| /** |
| * netsec.c - Socionext Synquacer Netsec driver |
| * Copyright 2021 Linaro Ltd. |
| */ |
| |
| #include <clk.h> |
| #include <cpu_func.h> |
| #include <dm.h> |
| #include <fdt_support.h> |
| #include <log.h> |
| #include <malloc.h> |
| #include <miiphy.h> |
| #include <net.h> |
| #include <regmap.h> |
| #include <reset.h> |
| #include <syscon.h> |
| #include <asm/cache.h> |
| #include <asm/global_data.h> |
| #include <dm/device_compat.h> |
| #include <linux/bitops.h> |
| #include <linux/delay.h> |
| #include <linux/err.h> |
| #include <linux/io.h> |
| #include <linux/iopoll.h> |
| #include <spi.h> |
| #include <spi_flash.h> |
| |
| #define NETSEC_REG_SOFT_RST 0x104 |
| #define NETSEC_REG_COM_INIT 0x120 |
| |
| #define NETSEC_REG_TOP_STATUS 0x200 |
| #define NETSEC_IRQ_RX BIT(1) |
| #define NETSEC_IRQ_TX BIT(0) |
| |
| #define NETSEC_REG_TOP_INTEN 0x204 |
| #define NETSEC_REG_INTEN_SET 0x234 |
| #define NETSEC_REG_INTEN_CLR 0x238 |
| |
| #define NETSEC_REG_NRM_TX_STATUS 0x400 |
| #define NETSEC_REG_NRM_TX_INTEN 0x404 |
| #define NETSEC_REG_NRM_TX_INTEN_SET 0x428 |
| #define NETSEC_REG_NRM_TX_INTEN_CLR 0x42c |
| #define NRM_TX_ST_NTOWNR BIT(17) |
| #define NRM_TX_ST_TR_ERR BIT(16) |
| #define NRM_TX_ST_TXDONE BIT(15) |
| #define NRM_TX_ST_TMREXP BIT(14) |
| |
| #define NETSEC_REG_NRM_RX_STATUS 0x440 |
| #define NETSEC_REG_NRM_RX_INTEN 0x444 |
| #define NETSEC_REG_NRM_RX_INTEN_SET 0x468 |
| #define NETSEC_REG_NRM_RX_INTEN_CLR 0x46c |
| #define NRM_RX_ST_RC_ERR BIT(16) |
| #define NRM_RX_ST_PKTCNT BIT(15) |
| #define NRM_RX_ST_TMREXP BIT(14) |
| |
| #define NETSEC_REG_PKT_CMD_BUF 0xd0 |
| |
| #define NETSEC_REG_CLK_EN 0x100 |
| |
| #define NETSEC_REG_PKT_CTRL 0x140 |
| |
| #define NETSEC_REG_DMA_TMR_CTRL 0x20c |
| #define NETSEC_REG_F_TAIKI_MC_VER 0x22c |
| #define NETSEC_REG_F_TAIKI_VER 0x230 |
| #define NETSEC_REG_DMA_HM_CTRL 0x214 |
| #define NETSEC_REG_DMA_MH_CTRL 0x220 |
| #define NETSEC_REG_ADDR_DIS_CORE 0x218 |
| #define NETSEC_REG_DMAC_HM_CMD_BUF 0x210 |
| #define NETSEC_REG_DMAC_MH_CMD_BUF 0x21c |
| |
| #define NETSEC_REG_NRM_TX_PKTCNT 0x410 |
| |
| #define NETSEC_REG_NRM_TX_DONE_PKTCNT 0x414 |
| #define NETSEC_REG_NRM_TX_DONE_TXINT_PKTCNT 0x418 |
| |
| #define NETSEC_REG_NRM_TX_TMR 0x41c |
| |
| #define NETSEC_REG_NRM_RX_PKTCNT 0x454 |
| #define NETSEC_REG_NRM_RX_RXINT_PKTCNT 0x458 |
| #define NETSEC_REG_NRM_TX_TXINT_TMR 0x420 |
| #define NETSEC_REG_NRM_RX_RXINT_TMR 0x460 |
| |
| #define NETSEC_REG_NRM_RX_TMR 0x45c |
| |
| #define NETSEC_REG_NRM_TX_DESC_START_UP 0x434 |
| #define NETSEC_REG_NRM_TX_DESC_START_LW 0x408 |
| #define NETSEC_REG_NRM_RX_DESC_START_UP 0x474 |
| #define NETSEC_REG_NRM_RX_DESC_START_LW 0x448 |
| |
| #define NETSEC_REG_NRM_TX_CONFIG 0x430 |
| #define NETSEC_REG_NRM_RX_CONFIG 0x470 |
| |
| #define MAC_REG_STATUS 0x1024 |
| #define MAC_REG_DATA 0x11c0 |
| #define MAC_REG_CMD 0x11c4 |
| #define MAC_REG_FLOW_TH 0x11cc |
| #define MAC_REG_INTF_SEL 0x11d4 |
| #define MAC_REG_DESC_INIT 0x11fc |
| #define MAC_REG_DESC_SOFT_RST 0x1204 |
| #define NETSEC_REG_MODE_TRANS_COMP_STATUS 0x500 |
| |
| #define GMAC_REG_MCR 0x0000 |
| #define GMAC_REG_MFFR 0x0004 |
| #define GMAC_REG_GAR 0x0010 |
| #define GMAC_REG_GDR 0x0014 |
| #define GMAC_REG_FCR 0x0018 |
| #define GMAC_REG_BMR 0x1000 |
| #define GMAC_REG_RDLAR 0x100c |
| #define GMAC_REG_TDLAR 0x1010 |
| #define GMAC_REG_OMR 0x1018 |
| |
| #define MHZ(n) ((n) * 1000 * 1000) |
| |
| #define NETSEC_TX_SHIFT_OWN_FIELD 31 |
| #define NETSEC_TX_SHIFT_LD_FIELD 30 |
| #define NETSEC_TX_SHIFT_DRID_FIELD 24 |
| #define NETSEC_TX_SHIFT_PT_FIELD 21 |
| #define NETSEC_TX_SHIFT_TDRID_FIELD 16 |
| #define NETSEC_TX_SHIFT_CC_FIELD 15 |
| #define NETSEC_TX_SHIFT_FS_FIELD 9 |
| #define NETSEC_TX_LAST 8 |
| #define NETSEC_TX_SHIFT_CO 7 |
| #define NETSEC_TX_SHIFT_SO 6 |
| #define NETSEC_TX_SHIFT_TRS_FIELD 4 |
| |
| #define NETSEC_RX_PKT_OWN_FIELD 31 |
| #define NETSEC_RX_PKT_LD_FIELD 30 |
| #define NETSEC_RX_PKT_SDRID_FIELD 24 |
| #define NETSEC_RX_PKT_FR_FIELD 23 |
| #define NETSEC_RX_PKT_ER_FIELD 21 |
| #define NETSEC_RX_PKT_ERR_FIELD 16 |
| #define NETSEC_RX_PKT_TDRID_FIELD 12 |
| #define NETSEC_RX_PKT_FS_FIELD 9 |
| #define NETSEC_RX_PKT_LS_FIELD 8 |
| #define NETSEC_RX_PKT_CO_FIELD 6 |
| |
| #define NETSEC_RX_PKT_ERR_MASK 3 |
| |
| #define NETSEC_MAX_TX_PKT_LEN 1518 |
| #define NETSEC_MAX_TX_JUMBO_PKT_LEN 9018 |
| |
| #define NETSEC_RING_GMAC 15 |
| #define NETSEC_RING_MAX 2 |
| |
| #define NETSEC_TCP_SEG_LEN_MAX 1460 |
| #define NETSEC_TCP_JUMBO_SEG_LEN_MAX 8960 |
| |
| #define NETSEC_RX_CKSUM_NOTAVAIL 0 |
| #define NETSEC_RX_CKSUM_OK 1 |
| #define NETSEC_RX_CKSUM_NG 2 |
| |
| #define NETSEC_TOP_IRQ_REG_ME_START BIT(20) |
| #define NETSEC_IRQ_TRANSITION_COMPLETE BIT(4) |
| |
| #define NETSEC_MODE_TRANS_COMP_IRQ_N2T BIT(20) |
| #define NETSEC_MODE_TRANS_COMP_IRQ_T2N BIT(19) |
| |
| #define NETSEC_INT_PKTCNT_MAX 2047 |
| |
| #define NETSEC_FLOW_START_TH_MAX 95 |
| #define NETSEC_FLOW_STOP_TH_MAX 95 |
| #define NETSEC_FLOW_PAUSE_TIME_MIN 5 |
| |
| #define NETSEC_CLK_EN_REG_DOM_ALL 0x3f |
| |
| #define NETSEC_PKT_CTRL_REG_MODE_NRM BIT(28) |
| #define NETSEC_PKT_CTRL_REG_EN_JUMBO BIT(27) |
| #define NETSEC_PKT_CTRL_REG_LOG_CHKSUM_ER BIT(3) |
| #define NETSEC_PKT_CTRL_REG_LOG_HD_INCOMPLETE BIT(2) |
| #define NETSEC_PKT_CTRL_REG_LOG_HD_ER BIT(1) |
| #define NETSEC_PKT_CTRL_REG_DRP_NO_MATCH BIT(0) |
| |
| #define NETSEC_CLK_EN_REG_DOM_G BIT(5) |
| #define NETSEC_CLK_EN_REG_DOM_C BIT(1) |
| #define NETSEC_CLK_EN_REG_DOM_D BIT(0) |
| |
| #define NETSEC_COM_INIT_REG_DB BIT(2) |
| #define NETSEC_COM_INIT_REG_CLS BIT(1) |
| #define NETSEC_COM_INIT_REG_ALL (NETSEC_COM_INIT_REG_CLS | \ |
| NETSEC_COM_INIT_REG_DB) |
| |
| #define NETSEC_SOFT_RST_REG_RESET 0 |
| #define NETSEC_SOFT_RST_REG_RUN BIT(31) |
| |
| #define NETSEC_DMA_CTRL_REG_STOP 1 |
| #define MH_CTRL__MODE_TRANS BIT(20) |
| |
| #define NETSEC_GMAC_CMD_ST_READ 0 |
| #define NETSEC_GMAC_CMD_ST_WRITE BIT(28) |
| #define NETSEC_GMAC_CMD_ST_BUSY BIT(31) |
| |
| #define NETSEC_GMAC_BMR_REG_COMMON 0x00412080 |
| #define NETSEC_GMAC_BMR_REG_RESET 0x00020181 |
| #define NETSEC_GMAC_BMR_REG_SWR 0x00000001 |
| |
| #define NETSEC_GMAC_OMR_REG_ST BIT(13) |
| #define NETSEC_GMAC_OMR_REG_SR BIT(1) |
| |
| #define NETSEC_GMAC_MCR_REG_IBN BIT(30) |
| #define NETSEC_GMAC_MCR_REG_CST BIT(25) |
| #define NETSEC_GMAC_MCR_REG_JE BIT(20) |
| #define NETSEC_MCR_PS BIT(15) |
| #define NETSEC_GMAC_MCR_REG_FES BIT(14) |
| #define NETSEC_GMAC_MCR_REG_FULL_DUPLEX_COMMON 0x0000280c |
| #define NETSEC_GMAC_MCR_REG_HALF_DUPLEX_COMMON 0x0001a00c |
| |
| #define NETSEC_FCR_RFE BIT(2) |
| #define NETSEC_FCR_TFE BIT(1) |
| |
| #define NETSEC_GMAC_GAR_REG_GW BIT(1) |
| #define NETSEC_GMAC_GAR_REG_GB BIT(0) |
| |
| #define NETSEC_GMAC_GAR_REG_SHIFT_PA 11 |
| #define NETSEC_GMAC_GAR_REG_SHIFT_GR 6 |
| #define GMAC_REG_SHIFT_CR_GAR 2 |
| |
| #define NETSEC_GMAC_GAR_REG_CR_25_35_MHZ 2 |
| #define NETSEC_GMAC_GAR_REG_CR_35_60_MHZ 3 |
| #define NETSEC_GMAC_GAR_REG_CR_60_100_MHZ 0 |
| #define NETSEC_GMAC_GAR_REG_CR_100_150_MHZ 1 |
| #define NETSEC_GMAC_GAR_REG_CR_150_250_MHZ 4 |
| #define NETSEC_GMAC_GAR_REG_CR_250_300_MHZ 5 |
| |
| #define NETSEC_GMAC_RDLAR_REG_COMMON 0x18000 |
| #define NETSEC_GMAC_TDLAR_REG_COMMON 0x1c000 |
| |
| #define NETSEC_REG_NETSEC_VER_F_TAIKI 0x50000 |
| |
| #define NETSEC_REG_DESC_RING_CONFIG_CFG_UP BIT(31) |
| #define NETSEC_REG_DESC_RING_CONFIG_CH_RST BIT(30) |
| #define NETSEC_REG_DESC_TMR_MODE 4 |
| #define NETSEC_REG_DESC_ENDIAN 0 |
| |
| #define NETSEC_MAC_DESC_SOFT_RST_SOFT_RST 1 |
| #define NETSEC_MAC_DESC_INIT_REG_INIT 1 |
| |
| #define NETSEC_EEPROM_MAC_ADDRESS 0x00 |
| #define NETSEC_EEPROM_HM_ME_ADDRESS_H 0x08 |
| #define NETSEC_EEPROM_HM_ME_ADDRESS_L 0x0C |
| #define NETSEC_EEPROM_HM_ME_SIZE 0x10 |
| #define NETSEC_EEPROM_MH_ME_ADDRESS_H 0x14 |
| #define NETSEC_EEPROM_MH_ME_ADDRESS_L 0x18 |
| #define NETSEC_EEPROM_MH_ME_SIZE 0x1C |
| #define NETSEC_EEPROM_PKT_ME_ADDRESS 0x20 |
| #define NETSEC_EEPROM_PKT_ME_SIZE 0x24 |
| |
| #define DESC_SZ sizeof(struct netsec_de) |
| |
| #define NETSEC_F_NETSEC_VER_MAJOR_NUM(x) ((x) & 0xffff0000) |
| |
| #define EERPROM_MAP_OFFSET 0x8000000 |
| #define NOR_BLOCK 1024 |
| |
| struct netsec_de { /* Netsec Descriptor layout */ |
| u32 attr; |
| u32 data_buf_addr_up; |
| u32 data_buf_addr_lw; |
| u32 buf_len_info; |
| }; |
| |
| struct netsec_priv { |
| struct netsec_de rxde[PKTBUFSRX]; |
| struct netsec_de txde[1]; |
| u16 rxat; |
| |
| phys_addr_t eeprom_base; |
| phys_addr_t ioaddr; |
| |
| struct mii_dev *bus; |
| struct phy_device *phydev; |
| u32 phy_addr, freq; |
| int phy_mode; |
| int max_speed; |
| }; |
| |
| struct netsec_tx_pkt_ctrl { |
| u16 tcp_seg_len; |
| bool tcp_seg_offload_flag; |
| bool cksum_offload_flag; |
| }; |
| |
| struct netsec_rx_pkt_info { |
| int rx_cksum_result; |
| int err_code; |
| bool err_flag; |
| }; |
| |
| static void netsec_write_reg(struct netsec_priv *priv, u32 reg_addr, u32 val) |
| { |
| writel(val, priv->ioaddr + reg_addr); |
| } |
| |
| static u32 netsec_read_reg(struct netsec_priv *priv, u32 reg_addr) |
| { |
| return readl(priv->ioaddr + reg_addr); |
| } |
| |
| /************* MDIO BUS OPS FOLLOW *************/ |
| |
| #define TIMEOUT_SPINS_MAC 1000 |
| #define TIMEOUT_SECONDARY_MS_MAC 100 |
| |
| static u32 netsec_clk_type(u32 freq) |
| { |
| if (freq < MHZ(35)) |
| return NETSEC_GMAC_GAR_REG_CR_25_35_MHZ; |
| if (freq < MHZ(60)) |
| return NETSEC_GMAC_GAR_REG_CR_35_60_MHZ; |
| if (freq < MHZ(100)) |
| return NETSEC_GMAC_GAR_REG_CR_60_100_MHZ; |
| if (freq < MHZ(150)) |
| return NETSEC_GMAC_GAR_REG_CR_100_150_MHZ; |
| if (freq < MHZ(250)) |
| return NETSEC_GMAC_GAR_REG_CR_150_250_MHZ; |
| |
| return NETSEC_GMAC_GAR_REG_CR_250_300_MHZ; |
| } |
| |
| static int netsec_wait_while_busy(struct netsec_priv *priv, u32 addr, u32 mask) |
| { |
| u32 timeout = TIMEOUT_SPINS_MAC; |
| |
| while (--timeout && netsec_read_reg(priv, addr) & mask) |
| cpu_relax(); |
| if (timeout) |
| return 0; |
| |
| timeout = TIMEOUT_SECONDARY_MS_MAC; |
| while (--timeout && netsec_read_reg(priv, addr) & mask) |
| udelay(2000); |
| |
| if (timeout) |
| return 0; |
| |
| pr_err("%s: timeout\n", __func__); |
| |
| return -ETIMEDOUT; |
| } |
| |
| static int netsec_set_mac_reg(struct netsec_priv *priv, u32 addr, u32 value) |
| { |
| netsec_write_reg(priv, MAC_REG_DATA, value); |
| netsec_write_reg(priv, MAC_REG_CMD, addr | NETSEC_GMAC_CMD_ST_WRITE); |
| return netsec_wait_while_busy(priv, |
| MAC_REG_CMD, NETSEC_GMAC_CMD_ST_BUSY); |
| } |
| |
| static int netsec_get_mac_reg(struct netsec_priv *priv, u32 addr, u32 *read) |
| { |
| int ret; |
| |
| netsec_write_reg(priv, MAC_REG_CMD, addr | NETSEC_GMAC_CMD_ST_READ); |
| ret = netsec_wait_while_busy(priv, |
| MAC_REG_CMD, NETSEC_GMAC_CMD_ST_BUSY); |
| if (ret) |
| return ret; |
| |
| *read = netsec_read_reg(priv, MAC_REG_DATA); |
| |
| return 0; |
| } |
| |
| static int netsec_mac_wait_while_busy(struct netsec_priv *priv, |
| u32 addr, u32 mask) |
| { |
| u32 timeout = TIMEOUT_SPINS_MAC; |
| u32 data; |
| int ret; |
| |
| do { |
| ret = netsec_get_mac_reg(priv, addr, &data); |
| if (ret) |
| break; |
| udelay(1); |
| } while (--timeout && (data & mask)); |
| |
| if (timeout) |
| return 0; |
| |
| timeout = TIMEOUT_SECONDARY_MS_MAC; |
| do { |
| udelay(2000); |
| |
| ret = netsec_get_mac_reg(priv, addr, &data); |
| if (ret) |
| break; |
| cpu_relax(); |
| } while (--timeout && (data & mask)); |
| |
| if (timeout && !ret) |
| return 0; |
| |
| return -ETIMEDOUT; |
| } |
| |
| static void netsec_cache_invalidate(uintptr_t vaddr, int len) |
| { |
| invalidate_dcache_range(rounddown(vaddr, ARCH_DMA_MINALIGN), |
| roundup(vaddr + len, ARCH_DMA_MINALIGN)); |
| } |
| |
| static void netsec_cache_flush(uintptr_t vaddr, int len) |
| { |
| flush_dcache_range(rounddown(vaddr, ARCH_DMA_MINALIGN), |
| roundup(vaddr + len, ARCH_DMA_MINALIGN)); |
| } |
| |
| static void netsec_set_rx_de(struct netsec_priv *priv, u16 idx, void *addr) |
| { |
| struct netsec_de *de = &priv->rxde[idx]; |
| u32 attr = (1 << NETSEC_RX_PKT_OWN_FIELD) | |
| (1 << NETSEC_RX_PKT_FS_FIELD) | |
| (1 << NETSEC_RX_PKT_LS_FIELD); |
| |
| if (idx == PKTBUFSRX - 1) |
| attr |= (1 << NETSEC_RX_PKT_LD_FIELD); |
| |
| de->data_buf_addr_up = upper_32_bits((dma_addr_t)addr); |
| de->data_buf_addr_lw = lower_32_bits((dma_addr_t)addr); |
| de->buf_len_info = PKTSIZE; |
| de->attr = attr; |
| dmb(); |
| netsec_cache_flush((uintptr_t)de, sizeof(*de)); |
| } |
| |
| static void netsec_set_tx_de(struct netsec_priv *priv, void *addr, int len) |
| { |
| struct netsec_de *de = &priv->txde[0]; |
| u32 attr; |
| |
| attr = (1 << NETSEC_TX_SHIFT_OWN_FIELD) | |
| (1 << NETSEC_TX_SHIFT_PT_FIELD) | |
| (NETSEC_RING_GMAC << NETSEC_TX_SHIFT_TDRID_FIELD) | |
| (1 << NETSEC_TX_SHIFT_FS_FIELD) | |
| (1 << NETSEC_TX_LAST) | |
| (1 << NETSEC_TX_SHIFT_TRS_FIELD) | |
| (1 << NETSEC_TX_SHIFT_LD_FIELD); |
| |
| de->data_buf_addr_up = upper_32_bits((dma_addr_t)addr); |
| de->data_buf_addr_lw = lower_32_bits((dma_addr_t)addr); |
| de->buf_len_info = len; |
| de->attr = attr; |
| dmb(); |
| netsec_cache_flush((uintptr_t)de, sizeof(*de)); |
| } |
| |
| static int netsec_get_phy_reg(struct netsec_priv *priv, |
| int phy_addr, int reg_addr) |
| { |
| u32 data; |
| int ret; |
| |
| if (phy_addr != 7) |
| return -EINVAL; |
| |
| if (netsec_set_mac_reg(priv, GMAC_REG_GAR, NETSEC_GMAC_GAR_REG_GB | |
| phy_addr << NETSEC_GMAC_GAR_REG_SHIFT_PA | |
| reg_addr << NETSEC_GMAC_GAR_REG_SHIFT_GR | |
| (netsec_clk_type(priv->freq) << |
| GMAC_REG_SHIFT_CR_GAR))) |
| return -ETIMEDOUT; |
| |
| ret = netsec_mac_wait_while_busy(priv, GMAC_REG_GAR, |
| NETSEC_GMAC_GAR_REG_GB); |
| if (ret) |
| return ret; |
| |
| ret = netsec_get_mac_reg(priv, GMAC_REG_GDR, &data); |
| if (ret) |
| return ret; |
| |
| return data; |
| } |
| |
| static int netsec_set_phy_reg(struct netsec_priv *priv, |
| int phy_addr, int reg_addr, u16 val) |
| { |
| int ret; |
| |
| if (phy_addr != 7) |
| return -EINVAL; |
| if (netsec_set_mac_reg(priv, GMAC_REG_GDR, val)) |
| return -ETIMEDOUT; |
| |
| if (netsec_set_mac_reg(priv, GMAC_REG_GAR, |
| phy_addr << NETSEC_GMAC_GAR_REG_SHIFT_PA | |
| reg_addr << NETSEC_GMAC_GAR_REG_SHIFT_GR | |
| NETSEC_GMAC_GAR_REG_GW | NETSEC_GMAC_GAR_REG_GB | |
| (netsec_clk_type(priv->freq) << |
| GMAC_REG_SHIFT_CR_GAR))) |
| return -ETIMEDOUT; |
| |
| ret = netsec_mac_wait_while_busy(priv, GMAC_REG_GAR, |
| NETSEC_GMAC_GAR_REG_GB); |
| |
| /* Developerbox implements RTL8211E PHY and there is |
| * a compatibility problem with F_GMAC4. |
| * RTL8211E expects MDC clock must be kept toggling for several |
| * clock cycle with MDIO high before entering the IDLE state. |
| * To meet this requirement, netsec driver needs to issue dummy |
| * read(e.g. read PHYID1(offset 0x2) register) right after write. |
| */ |
| netsec_get_phy_reg(priv, phy_addr, MII_PHYSID1); |
| |
| return ret; |
| } |
| |
| static int netsec_mac_update_to_phy_state(struct netsec_priv *priv) |
| { |
| struct phy_device *phydev = priv->phydev; |
| u32 value = 0; |
| |
| value = phydev->duplex ? NETSEC_GMAC_MCR_REG_FULL_DUPLEX_COMMON : |
| NETSEC_GMAC_MCR_REG_HALF_DUPLEX_COMMON; |
| |
| if (phydev->speed != SPEED_1000) |
| value |= NETSEC_MCR_PS; |
| |
| if (phydev->interface != PHY_INTERFACE_MODE_GMII && |
| phydev->speed == SPEED_100) |
| value |= NETSEC_GMAC_MCR_REG_FES; |
| |
| value |= NETSEC_GMAC_MCR_REG_CST | NETSEC_GMAC_MCR_REG_JE; |
| |
| if (phy_interface_is_rgmii(phydev)) |
| value |= NETSEC_GMAC_MCR_REG_IBN; |
| |
| if (netsec_set_mac_reg(priv, GMAC_REG_MCR, value)) |
| return -ETIMEDOUT; |
| |
| return 0; |
| } |
| |
| static int netsec_start_gmac(struct netsec_priv *priv) |
| { |
| u32 value = 0; |
| int ret; |
| |
| if (priv->max_speed != SPEED_1000) |
| value = (NETSEC_GMAC_MCR_REG_CST | |
| NETSEC_GMAC_MCR_REG_HALF_DUPLEX_COMMON); |
| |
| if (netsec_set_mac_reg(priv, GMAC_REG_MCR, value)) |
| return -ETIMEDOUT; |
| |
| if (netsec_set_mac_reg(priv, GMAC_REG_BMR, |
| NETSEC_GMAC_BMR_REG_RESET)) |
| return -ETIMEDOUT; |
| |
| /* Wait soft reset */ |
| mdelay(5); |
| |
| ret = netsec_get_mac_reg(priv, GMAC_REG_BMR, &value); |
| if (ret) |
| return ret; |
| |
| if (value & NETSEC_GMAC_BMR_REG_SWR) |
| return -EAGAIN; |
| |
| netsec_write_reg(priv, MAC_REG_DESC_SOFT_RST, 1); |
| if (netsec_wait_while_busy(priv, MAC_REG_DESC_SOFT_RST, 1)) |
| return -ETIMEDOUT; |
| |
| netsec_write_reg(priv, MAC_REG_DESC_INIT, 1); |
| if (netsec_wait_while_busy(priv, MAC_REG_DESC_INIT, 1)) |
| return -ETIMEDOUT; |
| |
| if (netsec_set_mac_reg(priv, GMAC_REG_BMR, |
| NETSEC_GMAC_BMR_REG_COMMON)) |
| return -ETIMEDOUT; |
| |
| if (netsec_set_mac_reg(priv, GMAC_REG_RDLAR, |
| NETSEC_GMAC_RDLAR_REG_COMMON)) |
| return -ETIMEDOUT; |
| |
| if (netsec_set_mac_reg(priv, GMAC_REG_TDLAR, |
| NETSEC_GMAC_TDLAR_REG_COMMON)) |
| return -ETIMEDOUT; |
| |
| if (netsec_set_mac_reg(priv, GMAC_REG_MFFR, 0x80000001)) |
| return -ETIMEDOUT; |
| |
| ret = netsec_mac_update_to_phy_state(priv); |
| if (ret) |
| return ret; |
| |
| ret = netsec_get_mac_reg(priv, GMAC_REG_OMR, &value); |
| if (ret) |
| return ret; |
| |
| value |= NETSEC_GMAC_OMR_REG_SR; |
| value |= NETSEC_GMAC_OMR_REG_ST; |
| |
| netsec_write_reg(priv, NETSEC_REG_NRM_RX_INTEN_CLR, ~0); |
| netsec_write_reg(priv, NETSEC_REG_NRM_TX_INTEN_CLR, ~0); |
| |
| if (netsec_set_mac_reg(priv, GMAC_REG_OMR, value)) |
| return -ETIMEDOUT; |
| |
| return 0; |
| } |
| |
| static int netsec_stop_gmac(struct netsec_priv *priv) |
| { |
| u32 value; |
| int ret; |
| |
| ret = netsec_get_mac_reg(priv, GMAC_REG_OMR, &value); |
| if (ret) |
| return ret; |
| value &= ~NETSEC_GMAC_OMR_REG_SR; |
| value &= ~NETSEC_GMAC_OMR_REG_ST; |
| |
| /* disable all interrupts */ |
| netsec_write_reg(priv, NETSEC_REG_NRM_RX_INTEN_CLR, ~0); |
| netsec_write_reg(priv, NETSEC_REG_NRM_TX_INTEN_CLR, ~0); |
| |
| return netsec_set_mac_reg(priv, GMAC_REG_OMR, value); |
| } |
| |
| static void netsec_spi_read(char *buf, loff_t len, loff_t offset) |
| { |
| struct udevice *new; |
| struct spi_flash *flash; |
| |
| spi_flash_probe_bus_cs(CONFIG_SF_DEFAULT_BUS, CONFIG_SF_DEFAULT_CS, |
| CONFIG_SF_DEFAULT_SPEED, CONFIG_SF_DEFAULT_MODE, &new); |
| flash = dev_get_uclass_priv(new); |
| |
| spi_flash_read(flash, offset, len, buf); |
| } |
| |
| static int netsec_read_rom_hwaddr(struct udevice *dev) |
| { |
| struct netsec_priv *priv = dev_get_priv(dev); |
| struct eth_pdata *pdata = dev_get_plat(dev); |
| char macp[NOR_BLOCK]; |
| |
| netsec_spi_read(macp, sizeof(macp), priv->eeprom_base); |
| |
| pdata->enetaddr[0] = readb(macp + 3); |
| pdata->enetaddr[1] = readb(macp + 2); |
| pdata->enetaddr[2] = readb(macp + 1); |
| pdata->enetaddr[3] = readb(macp + 0); |
| pdata->enetaddr[4] = readb(macp + 7); |
| pdata->enetaddr[5] = readb(macp + 6); |
| return 0; |
| } |
| |
| static int netsec_send(struct udevice *dev, void *packet, int length) |
| { |
| struct netsec_priv *priv = dev_get_priv(dev); |
| u32 val, tout; |
| |
| val = netsec_read_reg(priv, NETSEC_REG_NRM_TX_STATUS); |
| netsec_cache_flush((uintptr_t)packet, length); |
| netsec_set_tx_de(priv, packet, length); |
| netsec_write_reg(priv, NETSEC_REG_NRM_TX_PKTCNT, 1); /* submit another tx */ |
| |
| val = netsec_read_reg(priv, NETSEC_REG_NRM_TX_PKTCNT); |
| |
| tout = 10000; |
| do { |
| val = netsec_read_reg(priv, NETSEC_REG_NRM_TX_DONE_PKTCNT); |
| udelay(2); |
| } while (--tout && !val); |
| |
| if (!tout) { |
| val = netsec_read_reg(priv, NETSEC_REG_NRM_TX_PKTCNT); |
| pr_err("%s: ETIMEDOUT: %dpackets\n", __func__, val); |
| return -ETIMEDOUT; |
| } |
| |
| return 0; |
| } |
| |
| static int netsec_free_packet(struct udevice *dev, uchar *packet, int length) |
| { |
| struct netsec_priv *priv = dev_get_priv(dev); |
| |
| netsec_set_rx_de(priv, priv->rxat, net_rx_packets[priv->rxat]); |
| |
| priv->rxat++; |
| if (priv->rxat == PKTBUFSRX) |
| priv->rxat = 0; |
| |
| return 0; |
| } |
| |
| static int netsec_recv(struct udevice *dev, int flags, uchar **packetp) |
| { |
| struct netsec_priv *priv = dev_get_priv(dev); |
| int idx = priv->rxat; |
| uchar *ptr = net_rx_packets[idx]; |
| struct netsec_de *de = &priv->rxde[idx]; |
| int length = 0; |
| |
| netsec_cache_invalidate((uintptr_t)de, sizeof(*de)); |
| |
| if (de->attr & (1U << NETSEC_RX_PKT_OWN_FIELD)) |
| return -EAGAIN; |
| |
| length = de->buf_len_info >> 16; |
| |
| /* invalidate after DMA is done */ |
| netsec_cache_invalidate((uintptr_t)ptr, length); |
| *packetp = ptr; |
| |
| return length; |
| } |
| |
| static int _netsec_get_phy_reg(struct mii_dev *bus, |
| int phy_addr, int devad, int reg_addr) |
| { |
| return netsec_get_phy_reg(bus->priv, phy_addr, reg_addr); |
| } |
| |
| static int _netsec_set_phy_reg(struct mii_dev *bus, |
| int phy_addr, int devad, int reg_addr, u16 val) |
| { |
| return netsec_set_phy_reg(bus->priv, phy_addr, reg_addr, val); |
| } |
| |
| static int netsec_mdiobus_init(struct netsec_priv *priv, const char *name) |
| { |
| struct mii_dev *bus = mdio_alloc(); |
| |
| if (!bus) |
| return -ENOMEM; |
| |
| bus->read = _netsec_get_phy_reg; |
| bus->write = _netsec_set_phy_reg; |
| snprintf(bus->name, sizeof(bus->name), "%s", name); |
| bus->priv = priv; |
| |
| return mdio_register(bus); |
| } |
| |
| static int netsec_phy_init(struct netsec_priv *priv, void *dev) |
| { |
| struct phy_device *phydev; |
| int ret; |
| |
| phydev = phy_connect(priv->bus, priv->phy_addr, dev, priv->phy_mode); |
| |
| phydev->supported &= PHY_GBIT_FEATURES; |
| if (priv->max_speed) { |
| ret = phy_set_supported(phydev, priv->max_speed); |
| if (ret) |
| return ret; |
| } |
| phydev->advertising = phydev->supported; |
| |
| priv->phydev = phydev; |
| phy_config(phydev); |
| |
| return 0; |
| } |
| |
| static int netsec_netdev_load_ucode_region(struct netsec_priv *priv, u32 reg, |
| u32 addr_h, u32 addr_l, u32 size) |
| { |
| u64 base = ((u64)addr_h << 32 | addr_l) - EERPROM_MAP_OFFSET; |
| |
| while (size > 0) { |
| char buf[NOR_BLOCK]; |
| u32 *ucode = (u32 *)buf; |
| u64 off; |
| int i; |
| |
| off = base % NOR_BLOCK; |
| base -= off; |
| netsec_spi_read(buf, sizeof(buf), base); |
| |
| for (i = off / 4; i < sizeof(buf) / 4 && size > 0; i++, size--) |
| netsec_write_reg(priv, reg, ucode[i]); |
| base += NOR_BLOCK; |
| } |
| |
| return 0; |
| } |
| |
| static int netsec_netdev_load_microcode(struct netsec_priv *priv) |
| { |
| u32 addr_h, addr_l, size; |
| char buf[NOR_BLOCK]; |
| u32 *ucinfo = (u32 *)buf; |
| int err; |
| |
| netsec_spi_read(buf, sizeof(buf), priv->eeprom_base); |
| |
| addr_h = ucinfo[NETSEC_EEPROM_HM_ME_ADDRESS_H >> 2]; |
| addr_l = ucinfo[NETSEC_EEPROM_HM_ME_ADDRESS_L >> 2]; |
| size = ucinfo[NETSEC_EEPROM_HM_ME_SIZE >> 2]; |
| |
| err = netsec_netdev_load_ucode_region(priv, NETSEC_REG_DMAC_HM_CMD_BUF, |
| addr_h, addr_l, size); |
| if (err) |
| return err; |
| |
| addr_h = ucinfo[NETSEC_EEPROM_MH_ME_ADDRESS_H >> 2]; |
| addr_l = ucinfo[NETSEC_EEPROM_MH_ME_ADDRESS_L >> 2]; |
| size = ucinfo[NETSEC_EEPROM_MH_ME_SIZE >> 2]; |
| |
| err = netsec_netdev_load_ucode_region(priv, NETSEC_REG_DMAC_MH_CMD_BUF, |
| addr_h, addr_l, size); |
| if (err) |
| return err; |
| |
| addr_h = 0; |
| addr_l = ucinfo[NETSEC_EEPROM_PKT_ME_ADDRESS >> 2]; |
| size = ucinfo[NETSEC_EEPROM_PKT_ME_SIZE >> 2]; |
| |
| err = netsec_netdev_load_ucode_region(priv, NETSEC_REG_PKT_CMD_BUF, |
| addr_h, addr_l, size); |
| if (err) |
| return err; |
| |
| return 0; |
| } |
| |
| void netsec_pre_init_microengine(struct netsec_priv *priv) |
| { |
| u32 data; |
| |
| /* Remove dormant settings */ |
| data = netsec_get_phy_reg(priv, priv->phy_addr, MII_BMCR); |
| data &= ~BMCR_PDOWN; |
| data |= BMCR_ISOLATE; |
| netsec_set_phy_reg(priv, priv->phy_addr, MII_BMCR, data); |
| mdelay(100); |
| |
| /* Put phy in loopback mode to guarantee RXCLK input */ |
| data |= BMCR_LOOPBACK; |
| netsec_set_phy_reg(priv, priv->phy_addr, MII_BMCR, data); |
| mdelay(100); |
| } |
| |
| void netsec_post_init_microengine(struct netsec_priv *priv) |
| { |
| u32 data; |
| |
| /* Get phy back to normal operation */ |
| data = netsec_get_phy_reg(priv, priv->phy_addr, MII_BMCR); |
| data &= ~BMCR_LOOPBACK; |
| netsec_set_phy_reg(priv, priv->phy_addr, MII_BMCR, data); |
| mdelay(100); |
| |
| /* Apply software reset */ |
| data |= BMCR_RESET; |
| netsec_set_phy_reg(priv, priv->phy_addr, MII_BMCR, data); |
| mdelay(100); |
| } |
| |
| static int netsec_reset_hardware(struct netsec_priv *priv, bool load_ucode) |
| { |
| u32 value; |
| int err; |
| |
| netsec_write_reg(priv, NETSEC_REG_CLK_EN, 0x24); |
| |
| /* stop DMA engines */ |
| if (!netsec_read_reg(priv, NETSEC_REG_ADDR_DIS_CORE)) { |
| netsec_write_reg(priv, NETSEC_REG_DMA_HM_CTRL, |
| NETSEC_DMA_CTRL_REG_STOP); |
| netsec_write_reg(priv, NETSEC_REG_DMA_MH_CTRL, |
| NETSEC_DMA_CTRL_REG_STOP); |
| |
| value = 100; |
| while (netsec_read_reg(priv, NETSEC_REG_DMA_HM_CTRL) & |
| NETSEC_DMA_CTRL_REG_STOP) { |
| udelay(1000); |
| if (--value == 0) { |
| pr_err("%s:%d timeout!\n", __func__, __LINE__); |
| break; |
| } |
| } |
| |
| value = 100; |
| while (netsec_read_reg(priv, NETSEC_REG_DMA_MH_CTRL) & |
| NETSEC_DMA_CTRL_REG_STOP) { |
| udelay(1000); |
| if (--value == 0) { |
| pr_err("%s:%d timeout!\n", __func__, __LINE__); |
| break; |
| } |
| } |
| } |
| |
| netsec_set_mac_reg(priv, GMAC_REG_BMR, NETSEC_GMAC_BMR_REG_RESET); |
| |
| netsec_write_reg(priv, NETSEC_REG_SOFT_RST, NETSEC_SOFT_RST_REG_RESET); |
| netsec_write_reg(priv, NETSEC_REG_SOFT_RST, NETSEC_SOFT_RST_REG_RUN); |
| netsec_write_reg(priv, NETSEC_REG_COM_INIT, NETSEC_COM_INIT_REG_ALL); |
| |
| value = 100; |
| while (netsec_read_reg(priv, NETSEC_REG_COM_INIT) != 0) { |
| udelay(1000); |
| if (--value == 0) { |
| pr_err("%s:%d COM_INIT timeout!\n", __func__, __LINE__); |
| break; |
| } |
| } |
| |
| /* MAC desc init */ |
| netsec_write_reg(priv, MAC_REG_DESC_INIT, 1); |
| netsec_wait_while_busy(priv, MAC_REG_DESC_INIT, 1); |
| /* set MAC_INTF_SEL */ |
| netsec_write_reg(priv, MAC_REG_INTF_SEL, 1); |
| |
| netsec_write_reg(priv, NETSEC_REG_CLK_EN, 1 << 5); |
| |
| /* set desc_start addr */ |
| netsec_write_reg(priv, NETSEC_REG_NRM_RX_DESC_START_UP, |
| upper_32_bits((dma_addr_t)priv->rxde)); |
| netsec_write_reg(priv, NETSEC_REG_NRM_RX_DESC_START_LW, |
| lower_32_bits((dma_addr_t)priv->rxde)); |
| |
| netsec_write_reg(priv, NETSEC_REG_NRM_TX_DESC_START_UP, |
| upper_32_bits((dma_addr_t)priv->txde)); |
| netsec_write_reg(priv, NETSEC_REG_NRM_TX_DESC_START_LW, |
| lower_32_bits((dma_addr_t)priv->txde)); |
| |
| /* set normal tx dring ring config */ |
| netsec_write_reg(priv, NETSEC_REG_NRM_TX_CONFIG, |
| 1 << NETSEC_REG_DESC_ENDIAN); |
| netsec_write_reg(priv, NETSEC_REG_NRM_RX_CONFIG, |
| 1 << NETSEC_REG_DESC_ENDIAN); |
| |
| if (load_ucode) { |
| err = netsec_netdev_load_microcode(priv); |
| if (err) { |
| pr_err("%s: failed to load microcode (%d)\n", |
| __func__, err); |
| return err; |
| } |
| } |
| |
| /* set desc_start addr */ |
| netsec_write_reg(priv, NETSEC_REG_NRM_RX_DESC_START_UP, |
| upper_32_bits((dma_addr_t)priv->rxde)); |
| netsec_write_reg(priv, NETSEC_REG_NRM_RX_DESC_START_LW, |
| lower_32_bits((dma_addr_t)priv->rxde)); |
| |
| netsec_write_reg(priv, NETSEC_REG_NRM_TX_DESC_START_UP, |
| upper_32_bits((dma_addr_t)priv->txde)); |
| netsec_write_reg(priv, NETSEC_REG_NRM_TX_DESC_START_LW, |
| lower_32_bits((dma_addr_t)priv->txde)); |
| |
| netsec_write_reg(priv, NETSEC_REG_CLK_EN, 1 << 5); |
| |
| /* start DMA engines */ |
| netsec_write_reg(priv, NETSEC_REG_DMA_TMR_CTRL, priv->freq / 1000000 - 1); |
| |
| netsec_pre_init_microengine(priv); |
| |
| netsec_write_reg(priv, NETSEC_REG_ADDR_DIS_CORE, 0); |
| |
| mdelay(100); |
| |
| if (!(netsec_read_reg(priv, NETSEC_REG_TOP_STATUS) & |
| NETSEC_TOP_IRQ_REG_ME_START)) { |
| pr_err("microengine start failed\n"); |
| return -ENXIO; |
| } |
| |
| netsec_post_init_microengine(priv); |
| |
| /* clear microcode load end status */ |
| netsec_write_reg(priv, NETSEC_REG_TOP_STATUS, |
| NETSEC_TOP_IRQ_REG_ME_START); |
| |
| netsec_write_reg(priv, NETSEC_REG_CLK_EN, 1 << 5); |
| |
| value = netsec_read_reg(priv, NETSEC_REG_PKT_CTRL); |
| value |= NETSEC_PKT_CTRL_REG_MODE_NRM; |
| /* change to normal mode */ |
| netsec_write_reg(priv, NETSEC_REG_DMA_MH_CTRL, MH_CTRL__MODE_TRANS); |
| netsec_write_reg(priv, NETSEC_REG_PKT_CTRL, value); |
| |
| value = 100; |
| while ((netsec_read_reg(priv, NETSEC_REG_MODE_TRANS_COMP_STATUS) & |
| NETSEC_MODE_TRANS_COMP_IRQ_T2N) == 0) { |
| udelay(1000); |
| if (--value == 0) { |
| value = netsec_read_reg(priv, NETSEC_REG_MODE_TRANS_COMP_STATUS); |
| pr_err("%s:%d timeout! val=%x\n", __func__, __LINE__, value); |
| break; |
| } |
| } |
| |
| /* clear any pending EMPTY/ERR irq status */ |
| netsec_write_reg(priv, NETSEC_REG_NRM_TX_STATUS, ~0); |
| |
| /* Disable TX & RX intr */ |
| netsec_write_reg(priv, NETSEC_REG_INTEN_CLR, ~0); |
| |
| return 0; |
| } |
| |
| static void netsec_stop(struct udevice *dev) |
| { |
| struct netsec_priv *priv = dev_get_priv(dev); |
| |
| netsec_write_reg(priv, NETSEC_REG_ADDR_DIS_CORE, 7); |
| netsec_stop_gmac(priv); |
| phy_shutdown(priv->phydev); |
| netsec_reset_hardware(priv, false); |
| } |
| |
| static int netsec_start(struct udevice *dev) |
| { |
| struct netsec_priv *priv = dev_get_priv(dev); |
| int i; |
| |
| phy_startup(priv->phydev); |
| netsec_start_gmac(priv); |
| |
| priv->rxat = 0; |
| for (i = 0; i < PKTBUFSRX; i++) |
| netsec_set_rx_de(priv, i, net_rx_packets[i]); |
| |
| return 0; |
| } |
| |
| static int netsec_of_to_plat(struct udevice *dev) |
| { |
| struct eth_pdata *pdata = dev_get_plat(dev); |
| struct netsec_priv *priv = dev_get_priv(dev); |
| struct ofnode_phandle_args phandle_args; |
| const char *phy_mode; |
| |
| pdata->iobase = dev_read_addr_index(dev, 0); |
| priv->eeprom_base = dev_read_addr_index(dev, 1) - EERPROM_MAP_OFFSET; |
| |
| pdata->phy_interface = -1; |
| phy_mode = dev_read_prop(dev, "phy-mode", NULL); |
| if (phy_mode) |
| pdata->phy_interface = phy_get_interface_by_name(phy_mode); |
| if (pdata->phy_interface == -1) { |
| pr_err("%s: Invalid PHY interface '%s'\n", __func__, phy_mode); |
| return -EINVAL; |
| } |
| |
| if (!dev_read_phandle_with_args(dev, "phy-handle", NULL, 0, 0, |
| &phandle_args)) |
| priv->phy_addr = ofnode_read_u32_default(phandle_args.node, "reg", 7); |
| else |
| priv->phy_addr = 7; |
| |
| pdata->max_speed = dev_read_u32_default(dev, "max-speed", SPEED_1000); |
| |
| priv->ioaddr = pdata->iobase; |
| priv->phy_mode = pdata->phy_interface; |
| priv->max_speed = pdata->max_speed; |
| priv->freq = 250000000UL; |
| |
| return 0; |
| } |
| |
| #define SMMU_SCR0_SHCFG_INNER (0x2 << 22) |
| #define SMMU_SCR0_MTCFG (0x1 << 20) |
| #define SMMU_SCR0_MEMATTR_INNER_OUTER_WB (0xf << 16) |
| |
| static int netsec_probe(struct udevice *dev) |
| { |
| struct netsec_priv *priv = dev_get_priv(dev); |
| int ret; |
| |
| writel(SMMU_SCR0_SHCFG_INNER | SMMU_SCR0_MTCFG | SMMU_SCR0_MEMATTR_INNER_OUTER_WB, |
| (phys_addr_t)0x52E00000); |
| |
| netsec_reset_hardware(priv, true); |
| |
| ret = netsec_mdiobus_init(priv, dev->name); |
| if (ret) { |
| pr_err("Failed to initialize mdiobus: %d\n", ret); |
| return ret; |
| } |
| |
| priv->bus = miiphy_get_dev_by_name(dev->name); |
| |
| ret = netsec_phy_init(priv, dev); |
| if (ret) { |
| pr_err("Failed to initialize phy: %d\n", ret); |
| goto out_mdiobus_release; |
| } |
| |
| return 0; |
| out_mdiobus_release: |
| mdio_unregister(priv->bus); |
| mdio_free(priv->bus); |
| return ret; |
| } |
| |
| static int netsec_remove(struct udevice *dev) |
| { |
| struct netsec_priv *priv = dev_get_priv(dev); |
| |
| free(priv->phydev); |
| mdio_unregister(priv->bus); |
| mdio_free(priv->bus); |
| |
| return 0; |
| } |
| |
| static const struct eth_ops netsec_ops = { |
| .start = netsec_start, |
| .stop = netsec_stop, |
| .send = netsec_send, |
| .recv = netsec_recv, |
| .free_pkt = netsec_free_packet, |
| .read_rom_hwaddr = netsec_read_rom_hwaddr, |
| }; |
| |
| static const struct udevice_id netsec_ids[] = { |
| { |
| .compatible = "socionext,synquacer-netsec", |
| }, |
| {} |
| }; |
| |
| U_BOOT_DRIVER(ave) = { |
| .name = "synquacer_netsec", |
| .id = UCLASS_ETH, |
| .of_match = netsec_ids, |
| .probe = netsec_probe, |
| .remove = netsec_remove, |
| .of_to_plat = netsec_of_to_plat, |
| .ops = &netsec_ops, |
| .priv_auto = sizeof(struct netsec_priv), |
| .plat_auto = sizeof(struct eth_pdata), |
| }; |