| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * (C) Copyright 2001 |
| * Denis Peter, MPL AG Switzerland |
| * |
| * Part of this source has been derived from the Linux USB |
| * project. |
| */ |
| #include <console.h> |
| #include <dm.h> |
| #include <env.h> |
| #include <errno.h> |
| #include <log.h> |
| #include <malloc.h> |
| #include <memalign.h> |
| #include <stdio_dev.h> |
| #include <time.h> |
| #include <watchdog.h> |
| #include <asm/byteorder.h> |
| #ifdef CONFIG_SANDBOX |
| #include <asm/state.h> |
| #endif |
| |
| #include <usb.h> |
| |
| /* |
| * USB vendor and product IDs used for quirks. |
| */ |
| #define USB_VENDOR_ID_APPLE 0x05ac |
| #define USB_DEVICE_ID_APPLE_MAGIC_KEYBOARD_2021 0x029c |
| #define USB_DEVICE_ID_APPLE_MAGIC_KEYBOARD_FINGERPRINT_2021 0x029a |
| #define USB_DEVICE_ID_APPLE_MAGIC_KEYBOARD_NUMPAD_2021 0x029f |
| |
| #define USB_VENDOR_ID_KEYCHRON 0x3434 |
| |
| #define USB_HID_QUIRK_POLL_NO_REPORT_IDLE BIT(0) |
| |
| /* |
| * If overwrite_console returns 1, the stdin, stderr and stdout |
| * are switched to the serial port, else the settings in the |
| * environment are used |
| */ |
| #ifdef CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE |
| extern int overwrite_console(void); |
| #else |
| int overwrite_console(void) |
| { |
| return 0; |
| } |
| #endif |
| |
| /* Keyboard sampling rate */ |
| #define REPEAT_RATE 40 /* 40msec -> 25cps */ |
| #define REPEAT_DELAY 10 /* 10 x REPEAT_RATE = 400msec */ |
| |
| #define NUM_LOCK 0x53 |
| #define CAPS_LOCK 0x39 |
| #define SCROLL_LOCK 0x47 |
| |
| /* Modifier bits */ |
| #define LEFT_CNTR (1 << 0) |
| #define LEFT_SHIFT (1 << 1) |
| #define LEFT_ALT (1 << 2) |
| #define LEFT_GUI (1 << 3) |
| #define RIGHT_CNTR (1 << 4) |
| #define RIGHT_SHIFT (1 << 5) |
| #define RIGHT_ALT (1 << 6) |
| #define RIGHT_GUI (1 << 7) |
| |
| /* Size of the keyboard buffer */ |
| #define USB_KBD_BUFFER_LEN 0x20 |
| |
| /* Device name */ |
| #define DEVNAME "usbkbd" |
| |
| /* Keyboard maps */ |
| static const unsigned char usb_kbd_numkey[] = { |
| '1', '2', '3', '4', '5', '6', '7', '8', '9', '0', |
| '\r', 0x1b, '\b', '\t', ' ', '-', '=', '[', ']', |
| '\\', '#', ';', '\'', '`', ',', '.', '/' |
| }; |
| static const unsigned char usb_kbd_numkey_shifted[] = { |
| '!', '@', '#', '$', '%', '^', '&', '*', '(', ')', |
| '\r', 0x1b, '\b', '\t', ' ', '_', '+', '{', '}', |
| '|', '~', ':', '"', '~', '<', '>', '?' |
| }; |
| |
| static const unsigned char usb_kbd_num_keypad[] = { |
| '/', '*', '-', '+', '\r', |
| '1', '2', '3', '4', '5', '6', '7', '8', '9', '0', |
| '.', 0, 0, 0, '=' |
| }; |
| |
| static const u8 usb_special_keys[] = { |
| #ifdef CONFIG_USB_KEYBOARD_FN_KEYS |
| '2', 'H', '5', '3', 'F', '6', 'C', 'D', 'B', 'A' |
| #else |
| 'C', 'D', 'B', 'A' |
| #endif |
| }; |
| |
| /* |
| * NOTE: It's important for the NUM, CAPS, SCROLL-lock bits to be in this |
| * order. See usb_kbd_setled() function! |
| */ |
| #define USB_KBD_NUMLOCK (1 << 0) |
| #define USB_KBD_CAPSLOCK (1 << 1) |
| #define USB_KBD_SCROLLLOCK (1 << 2) |
| #define USB_KBD_CTRL (1 << 3) |
| |
| #define USB_KBD_LEDMASK \ |
| (USB_KBD_NUMLOCK | USB_KBD_CAPSLOCK | USB_KBD_SCROLLLOCK) |
| |
| struct usb_kbd_pdata { |
| unsigned long intpipe; |
| int intpktsize; |
| int intinterval; |
| unsigned long last_report; |
| struct int_queue *intq; |
| |
| uint32_t ifnum; |
| |
| uint32_t repeat_delay; |
| |
| uint32_t usb_in_pointer; |
| uint32_t usb_out_pointer; |
| uint8_t usb_kbd_buffer[USB_KBD_BUFFER_LEN]; |
| |
| uint8_t *new; |
| uint8_t old[USB_KBD_BOOT_REPORT_SIZE]; |
| |
| uint8_t flags; |
| }; |
| |
| extern int __maybe_unused net_busy_flag; |
| |
| /* The period of time between two calls of usb_kbd_testc(). */ |
| static unsigned long kbd_testc_tms; |
| |
| int usb_kbd_remove_for_test(void) |
| { |
| return console_remove_by_name(DEVNAME); |
| } |
| |
| /* Puts character in the queue and sets up the in and out pointer. */ |
| static void usb_kbd_put_queue(struct usb_kbd_pdata *data, u8 c) |
| { |
| if (data->usb_in_pointer == USB_KBD_BUFFER_LEN - 1) { |
| /* Check for buffer full. */ |
| if (data->usb_out_pointer == 0) |
| return; |
| |
| data->usb_in_pointer = 0; |
| } else { |
| /* Check for buffer full. */ |
| if (data->usb_in_pointer == data->usb_out_pointer - 1) |
| return; |
| |
| data->usb_in_pointer++; |
| } |
| |
| data->usb_kbd_buffer[data->usb_in_pointer] = c; |
| } |
| |
| /* |
| * Set the LEDs. Since this is used in the irq routine, the control job is |
| * issued with a timeout of 0. This means, that the job is queued without |
| * waiting for job completion. |
| */ |
| static void usb_kbd_setled(struct usb_device *dev) |
| { |
| struct usb_kbd_pdata *data = dev->privptr; |
| struct usb_interface *iface = &dev->config.if_desc[data->ifnum]; |
| ALLOC_ALIGN_BUFFER(uint32_t, leds, 1, USB_DMA_MINALIGN); |
| |
| *leds = data->flags & USB_KBD_LEDMASK; |
| usb_control_msg(dev, usb_sndctrlpipe(dev, 0), |
| USB_REQ_SET_REPORT, USB_TYPE_CLASS | USB_RECIP_INTERFACE, |
| 0x200, iface->desc.bInterfaceNumber, leds, 1, 0); |
| } |
| |
| #define CAPITAL_MASK 0x20 |
| /* Translate the scancode in ASCII */ |
| static int usb_kbd_translate(struct usb_kbd_pdata *data, unsigned char scancode, |
| unsigned char modifier, int pressed) |
| { |
| uint8_t keycode = 0; |
| |
| /* Key released */ |
| if (pressed == 0) { |
| data->repeat_delay = 0; |
| return 0; |
| } |
| |
| if (pressed == 2) { |
| data->repeat_delay++; |
| if (data->repeat_delay < REPEAT_DELAY) |
| return 0; |
| |
| data->repeat_delay = REPEAT_DELAY; |
| } |
| |
| /* Alphanumeric values */ |
| if ((scancode > 3) && (scancode <= 0x1d)) { |
| keycode = scancode - 4 + 'a'; |
| |
| if (data->flags & USB_KBD_CAPSLOCK) |
| keycode &= ~CAPITAL_MASK; |
| |
| if (modifier & (LEFT_SHIFT | RIGHT_SHIFT)) { |
| /* Handle CAPSLock + Shift pressed simultaneously */ |
| if (keycode & CAPITAL_MASK) |
| keycode &= ~CAPITAL_MASK; |
| else |
| keycode |= CAPITAL_MASK; |
| } |
| } |
| |
| if ((scancode > 0x1d) && (scancode < 0x39)) { |
| /* Shift pressed */ |
| if (modifier & (LEFT_SHIFT | RIGHT_SHIFT)) |
| keycode = usb_kbd_numkey_shifted[scancode - 0x1e]; |
| else |
| keycode = usb_kbd_numkey[scancode - 0x1e]; |
| } |
| |
| /* Numeric keypad */ |
| if ((scancode >= 0x54) && (scancode <= 0x67)) |
| keycode = usb_kbd_num_keypad[scancode - 0x54]; |
| |
| if (data->flags & USB_KBD_CTRL) |
| keycode = scancode - 0x3; |
| |
| if (pressed == 1) { |
| if (scancode == NUM_LOCK) { |
| data->flags ^= USB_KBD_NUMLOCK; |
| return 1; |
| } |
| |
| if (scancode == CAPS_LOCK) { |
| data->flags ^= USB_KBD_CAPSLOCK; |
| return 1; |
| } |
| if (scancode == SCROLL_LOCK) { |
| data->flags ^= USB_KBD_SCROLLLOCK; |
| return 1; |
| } |
| } |
| |
| /* Report keycode if any */ |
| if (keycode) { |
| debug("%c", keycode); |
| usb_kbd_put_queue(data, keycode); |
| return 0; |
| } |
| |
| #ifdef CONFIG_USB_KEYBOARD_FN_KEYS |
| if (scancode < 0x3a || scancode > 0x52 || |
| scancode == 0x46 || scancode == 0x47) |
| return 1; |
| |
| usb_kbd_put_queue(data, 0x1b); |
| if (scancode < 0x3e) { |
| /* F1 - F4 */ |
| usb_kbd_put_queue(data, 0x4f); |
| usb_kbd_put_queue(data, scancode - 0x3a + 'P'); |
| return 0; |
| } |
| usb_kbd_put_queue(data, '['); |
| if (scancode < 0x42) { |
| /* F5 - F8 */ |
| usb_kbd_put_queue(data, '1'); |
| if (scancode == 0x3e) |
| --scancode; |
| keycode = scancode - 0x3f + '7'; |
| } else if (scancode < 0x49) { |
| /* F9 - F12 */ |
| usb_kbd_put_queue(data, '2'); |
| if (scancode > 0x43) |
| ++scancode; |
| keycode = scancode - 0x42 + '0'; |
| } else { |
| /* |
| * INSERT, HOME, PAGE UP, DELETE, END, PAGE DOWN, |
| * RIGHT, LEFT, DOWN, UP |
| */ |
| keycode = usb_special_keys[scancode - 0x49]; |
| } |
| usb_kbd_put_queue(data, keycode); |
| if (scancode < 0x4f && scancode != 0x4a && scancode != 0x4d) |
| usb_kbd_put_queue(data, '~'); |
| return 0; |
| #else |
| /* Left, Right, Up, Down */ |
| if (scancode > 0x4e && scancode < 0x53) { |
| usb_kbd_put_queue(data, 0x1b); |
| usb_kbd_put_queue(data, '['); |
| usb_kbd_put_queue(data, usb_special_keys[scancode - 0x4f]); |
| return 0; |
| } |
| return 1; |
| #endif /* CONFIG_USB_KEYBOARD_FN_KEYS */ |
| } |
| |
| static uint32_t usb_kbd_service_key(struct usb_device *dev, int i, int up) |
| { |
| uint32_t res = 0; |
| struct usb_kbd_pdata *data = dev->privptr; |
| uint8_t *new; |
| uint8_t *old; |
| |
| if (up) { |
| new = data->old; |
| old = data->new; |
| } else { |
| new = data->new; |
| old = data->old; |
| } |
| |
| if ((old[i] > 3) && |
| (memscan(new + 2, old[i], USB_KBD_BOOT_REPORT_SIZE - 2) == |
| new + USB_KBD_BOOT_REPORT_SIZE)) { |
| res |= usb_kbd_translate(data, old[i], data->new[0], up); |
| } |
| |
| return res; |
| } |
| |
| /* Interrupt service routine */ |
| static int usb_kbd_irq_worker(struct usb_device *dev) |
| { |
| struct usb_kbd_pdata *data = dev->privptr; |
| int i, res = 0; |
| |
| /* No combo key pressed */ |
| if (data->new[0] == 0x00) |
| data->flags &= ~USB_KBD_CTRL; |
| /* Left or Right Ctrl pressed */ |
| else if ((data->new[0] == LEFT_CNTR) || (data->new[0] == RIGHT_CNTR)) |
| data->flags |= USB_KBD_CTRL; |
| |
| for (i = 2; i < USB_KBD_BOOT_REPORT_SIZE; i++) { |
| res |= usb_kbd_service_key(dev, i, 0); |
| res |= usb_kbd_service_key(dev, i, 1); |
| } |
| |
| /* Key is still pressed */ |
| if ((data->new[2] > 3) && (data->old[2] == data->new[2])) |
| res |= usb_kbd_translate(data, data->new[2], data->new[0], 2); |
| |
| if (res == 1) |
| usb_kbd_setled(dev); |
| |
| memcpy(data->old, data->new, USB_KBD_BOOT_REPORT_SIZE); |
| |
| return 1; |
| } |
| |
| /* Keyboard interrupt handler */ |
| static int usb_kbd_irq(struct usb_device *dev) |
| { |
| if ((dev->irq_status != 0) || |
| (dev->irq_act_len != USB_KBD_BOOT_REPORT_SIZE)) { |
| debug("USB KBD: Error %lX, len %d\n", |
| dev->irq_status, dev->irq_act_len); |
| return 1; |
| } |
| |
| return usb_kbd_irq_worker(dev); |
| } |
| |
| /* Interrupt polling */ |
| static inline void usb_kbd_poll_for_event(struct usb_device *dev) |
| { |
| #if defined(CONFIG_SYS_USB_EVENT_POLL) |
| struct usb_kbd_pdata *data = dev->privptr; |
| |
| /* Submit an interrupt transfer request */ |
| if (usb_int_msg(dev, data->intpipe, &data->new[0], |
| data->intpktsize, data->intinterval, true) >= 0) |
| usb_kbd_irq_worker(dev); |
| #elif defined(CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP) || \ |
| defined(CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE) |
| #if defined(CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP) |
| struct usb_interface *iface; |
| struct usb_kbd_pdata *data = dev->privptr; |
| iface = &dev->config.if_desc[data->ifnum]; |
| usb_get_report(dev, iface->desc.bInterfaceNumber, |
| 1, 0, data->new, USB_KBD_BOOT_REPORT_SIZE); |
| if (memcmp(data->old, data->new, USB_KBD_BOOT_REPORT_SIZE)) { |
| usb_kbd_irq_worker(dev); |
| #else |
| struct usb_kbd_pdata *data = dev->privptr; |
| if (poll_int_queue(dev, data->intq)) { |
| usb_kbd_irq_worker(dev); |
| /* We've consumed all queued int packets, create new */ |
| destroy_int_queue(dev, data->intq); |
| data->intq = create_int_queue(dev, data->intpipe, 1, |
| USB_KBD_BOOT_REPORT_SIZE, data->new, |
| data->intinterval); |
| #endif |
| data->last_report = get_timer(0); |
| /* Repeat last usb hid report every REPEAT_RATE ms for keyrepeat */ |
| } else if (data->last_report != -1 && |
| get_timer(data->last_report) > REPEAT_RATE) { |
| usb_kbd_irq_worker(dev); |
| data->last_report = get_timer(0); |
| } |
| #endif |
| } |
| |
| /* test if a character is in the queue */ |
| static int usb_kbd_testc(struct stdio_dev *sdev) |
| { |
| struct stdio_dev *dev; |
| struct usb_device *usb_kbd_dev; |
| struct usb_kbd_pdata *data; |
| |
| /* |
| * Polling the keyboard for an event can take dozens of milliseconds. |
| * Add a delay between polls to avoid blocking activity which polls |
| * rapidly, like the UEFI console timer. |
| */ |
| unsigned long poll_delay = CONFIG_SYS_HZ / 50; |
| |
| #ifdef CONFIG_CMD_NET |
| /* |
| * If net_busy_flag is 1, NET transfer is running, |
| * then we check key-pressed every second (first check may be |
| * less than 1 second) to improve TFTP booting performance. |
| */ |
| if (net_busy_flag) |
| poll_delay = CONFIG_SYS_HZ; |
| #endif |
| |
| #ifdef CONFIG_SANDBOX |
| /* |
| * Skip delaying polls if a test requests it. |
| */ |
| if (state_get_skip_delays()) |
| poll_delay = 0; |
| #endif |
| |
| dev = stdio_get_by_name(sdev->name); |
| usb_kbd_dev = (struct usb_device *)dev->priv; |
| data = usb_kbd_dev->privptr; |
| |
| if (get_timer(kbd_testc_tms) >= poll_delay) { |
| usb_kbd_poll_for_event(usb_kbd_dev); |
| kbd_testc_tms = get_timer(0); |
| } |
| |
| return !(data->usb_in_pointer == data->usb_out_pointer); |
| } |
| |
| /* gets the character from the queue */ |
| static int usb_kbd_getc(struct stdio_dev *sdev) |
| { |
| struct stdio_dev *dev; |
| struct usb_device *usb_kbd_dev; |
| struct usb_kbd_pdata *data; |
| |
| dev = stdio_get_by_name(sdev->name); |
| usb_kbd_dev = (struct usb_device *)dev->priv; |
| data = usb_kbd_dev->privptr; |
| |
| while (data->usb_in_pointer == data->usb_out_pointer) { |
| schedule(); |
| usb_kbd_poll_for_event(usb_kbd_dev); |
| } |
| |
| if (data->usb_out_pointer == USB_KBD_BUFFER_LEN - 1) |
| data->usb_out_pointer = 0; |
| else |
| data->usb_out_pointer++; |
| |
| return data->usb_kbd_buffer[data->usb_out_pointer]; |
| } |
| |
| /* probes the USB device dev for keyboard type. */ |
| static int usb_kbd_probe_dev(struct usb_device *dev, unsigned int ifnum) |
| { |
| struct usb_interface *iface; |
| struct usb_endpoint_descriptor *ep; |
| struct usb_kbd_pdata *data; |
| unsigned int quirks = 0; |
| int epNum; |
| |
| if (dev->descriptor.bNumConfigurations != 1) |
| return 0; |
| |
| iface = &dev->config.if_desc[ifnum]; |
| |
| if (iface->desc.bInterfaceClass != USB_CLASS_HID) |
| return 0; |
| |
| if (iface->desc.bInterfaceSubClass != USB_SUB_HID_BOOT) |
| return 0; |
| |
| if (iface->desc.bInterfaceProtocol != USB_PROT_HID_KEYBOARD) |
| return 0; |
| |
| for (epNum = 0; epNum < iface->desc.bNumEndpoints; epNum++) { |
| ep = &iface->ep_desc[epNum]; |
| |
| /* Check if endpoint is interrupt IN endpoint */ |
| if ((ep->bmAttributes & 3) != 3) |
| continue; |
| |
| if (ep->bEndpointAddress & 0x80) |
| break; |
| } |
| |
| if (epNum == iface->desc.bNumEndpoints) |
| return 0; |
| |
| debug("USB KBD: found interrupt EP: 0x%x\n", ep->bEndpointAddress); |
| |
| switch (dev->descriptor.idVendor) { |
| case USB_VENDOR_ID_APPLE: |
| case USB_VENDOR_ID_KEYCHRON: |
| quirks |= USB_HID_QUIRK_POLL_NO_REPORT_IDLE; |
| break; |
| default: |
| break; |
| } |
| |
| data = malloc(sizeof(struct usb_kbd_pdata)); |
| if (!data) { |
| printf("USB KBD: Error allocating private data\n"); |
| return 0; |
| } |
| |
| /* Clear private data */ |
| memset(data, 0, sizeof(struct usb_kbd_pdata)); |
| |
| /* allocate input buffer aligned and sized to USB DMA alignment */ |
| data->new = memalign(USB_DMA_MINALIGN, |
| roundup(USB_KBD_BOOT_REPORT_SIZE, USB_DMA_MINALIGN)); |
| |
| data->ifnum = ifnum; |
| |
| /* Insert private data into USB device structure */ |
| dev->privptr = data; |
| |
| /* Set IRQ handler */ |
| dev->irq_handle = usb_kbd_irq; |
| |
| data->intpipe = usb_rcvintpipe(dev, ep->bEndpointAddress); |
| data->intpktsize = min(usb_maxpacket(dev, data->intpipe), |
| USB_KBD_BOOT_REPORT_SIZE); |
| data->intinterval = ep->bInterval; |
| data->last_report = -1; |
| |
| /* We found a USB Keyboard, install it. */ |
| debug("USB KBD: set boot protocol\n"); |
| usb_set_protocol(dev, iface->desc.bInterfaceNumber, 0); |
| |
| #if !defined(CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP) && \ |
| !defined(CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE) |
| debug("USB KBD: set idle interval...\n"); |
| usb_set_idle(dev, iface->desc.bInterfaceNumber, REPEAT_RATE / 4, 0); |
| #else |
| debug("USB KBD: set idle interval=0...\n"); |
| usb_set_idle(dev, iface->desc.bInterfaceNumber, 0, 0); |
| #endif |
| |
| /* |
| * Apple and Keychron keyboards do not report the device state. Reports |
| * are only returned during key presses. |
| */ |
| if (quirks & USB_HID_QUIRK_POLL_NO_REPORT_IDLE) { |
| debug("USB KBD: quirk: skip testing device state\n"); |
| return 1; |
| } |
| debug("USB KBD: enable interrupt pipe...\n"); |
| #ifdef CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE |
| data->intq = create_int_queue(dev, data->intpipe, 1, |
| USB_KBD_BOOT_REPORT_SIZE, data->new, |
| data->intinterval); |
| if (!data->intq) { |
| #elif defined(CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP) |
| if (usb_get_report(dev, iface->desc.bInterfaceNumber, |
| 1, 0, data->new, USB_KBD_BOOT_REPORT_SIZE) < 0) { |
| #else |
| if (usb_int_msg(dev, data->intpipe, data->new, data->intpktsize, |
| data->intinterval, false) < 0) { |
| #endif |
| printf("Failed to get keyboard state from device %04x:%04x\n", |
| dev->descriptor.idVendor, dev->descriptor.idProduct); |
| /* Abort, we don't want to use that non-functional keyboard. */ |
| return 0; |
| } |
| |
| /* Success. */ |
| return 1; |
| } |
| |
| static int probe_usb_keyboard(struct usb_device *dev) |
| { |
| char *stdinname; |
| struct stdio_dev usb_kbd_dev; |
| unsigned int ifnum; |
| unsigned int max_ifnum = min((unsigned int)USB_MAX_ACTIVE_INTERFACES, |
| (unsigned int)dev->config.no_of_if); |
| int error; |
| |
| /* Try probing the keyboard */ |
| for (ifnum = 0; ifnum < max_ifnum; ifnum++) { |
| if (usb_kbd_probe_dev(dev, ifnum) == 1) |
| break; |
| } |
| if (ifnum >= max_ifnum) |
| return -ENOENT; |
| |
| /* Register the keyboard */ |
| debug("USB KBD: register.\n"); |
| memset(&usb_kbd_dev, 0, sizeof(struct stdio_dev)); |
| strcpy(usb_kbd_dev.name, DEVNAME); |
| usb_kbd_dev.flags = DEV_FLAGS_INPUT | DEV_FLAGS_DM; |
| usb_kbd_dev.getc = usb_kbd_getc; |
| usb_kbd_dev.tstc = usb_kbd_testc; |
| usb_kbd_dev.priv = (void *)dev; |
| error = stdio_register(&usb_kbd_dev); |
| if (error) |
| return error; |
| |
| stdinname = env_get("stdin"); |
| #if CONFIG_IS_ENABLED(CONSOLE_MUX) |
| if (strstr(stdinname, DEVNAME) != NULL) { |
| error = iomux_doenv(stdin, stdinname); |
| if (error) |
| return error; |
| } |
| #else |
| /* Check if this is the standard input device. */ |
| if (!strcmp(stdinname, DEVNAME)) { |
| /* Reassign the console */ |
| if (overwrite_console()) |
| return 1; |
| |
| error = console_assign(stdin, DEVNAME); |
| if (error) |
| return error; |
| } |
| #endif |
| |
| return 0; |
| } |
| |
| static int usb_kbd_probe(struct udevice *dev) |
| { |
| struct usb_device *udev = dev_get_parent_priv(dev); |
| |
| return probe_usb_keyboard(udev); |
| } |
| |
| static int usb_kbd_remove(struct udevice *dev) |
| { |
| struct usb_device *udev = dev_get_parent_priv(dev); |
| struct usb_kbd_pdata *data; |
| struct stdio_dev *sdev; |
| int ret; |
| |
| sdev = stdio_get_by_name(DEVNAME); |
| if (!sdev) { |
| ret = -ENXIO; |
| goto err; |
| } |
| data = udev->privptr; |
| #if CONFIG_IS_ENABLED(CONSOLE_MUX) |
| if (iomux_replace_device(stdin, DEVNAME, "nulldev")) { |
| ret = -ENOLINK; |
| goto err; |
| } |
| #endif |
| if (stdio_deregister_dev(sdev, true)) { |
| ret = -EPERM; |
| goto err; |
| } |
| #ifdef CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE |
| destroy_int_queue(udev, data->intq); |
| #endif |
| free(data->new); |
| free(data); |
| |
| return 0; |
| err: |
| printf("%s: warning, ret=%d", __func__, ret); |
| return ret; |
| } |
| |
| static const struct udevice_id usb_kbd_ids[] = { |
| { .compatible = "usb-keyboard" }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(usb_kbd) = { |
| .name = "usb_kbd", |
| .id = UCLASS_KEYBOARD, |
| .of_match = usb_kbd_ids, |
| .probe = usb_kbd_probe, |
| .remove = usb_kbd_remove, |
| }; |
| |
| static const struct usb_device_id kbd_id_table[] = { |
| { |
| .match_flags = USB_DEVICE_ID_MATCH_INT_CLASS | |
| USB_DEVICE_ID_MATCH_INT_SUBCLASS | |
| USB_DEVICE_ID_MATCH_INT_PROTOCOL, |
| .bInterfaceClass = USB_CLASS_HID, |
| .bInterfaceSubClass = USB_SUB_HID_BOOT, |
| .bInterfaceProtocol = USB_PROT_HID_KEYBOARD, |
| }, |
| { |
| USB_DEVICE(USB_VENDOR_ID_APPLE, |
| USB_DEVICE_ID_APPLE_MAGIC_KEYBOARD_2021), |
| }, |
| { |
| USB_DEVICE(USB_VENDOR_ID_APPLE, |
| USB_DEVICE_ID_APPLE_MAGIC_KEYBOARD_FINGERPRINT_2021), |
| }, |
| { |
| USB_DEVICE(USB_VENDOR_ID_APPLE, |
| USB_DEVICE_ID_APPLE_MAGIC_KEYBOARD_NUMPAD_2021), |
| }, |
| { } /* Terminating entry */ |
| }; |
| |
| U_BOOT_USB_DEVICE(usb_kbd, kbd_id_table); |