drivers/mtd/nand/fsl_ifc_spl.c - filogic/uboot - Gitiles

 /*
  * NAND boot for Freescale Integrated Flash Controller, NAND FCM
  *
  * Copyright 2011 Freescale Semiconductor, Inc.
  * Author: Dipen Dudhat <dipen.dudhat@freescale.com>
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */

 #include <common.h>
 #include <asm/io.h>
 #include <fsl_ifc.h>
 #include <linux/mtd/nand.h>

 static inline int is_blank(uchar *addr, int page_size)
 {
 	int i;

 	for (i = 0; i < page_size; i++) {
 		if (__raw_readb(&addr[i]) != 0xff)
 			return 0;
 	}

 	/*
 	 * For the SPL, don't worry about uncorrectable errors
 	 * where the main area is all FFs but shouldn't be.
 	 */
 	return 1;
 }

 /* returns nonzero if entire page is blank */
 static inline int check_read_ecc(uchar *buf, u32 *eccstat,
 				 unsigned int bufnum, int page_size)
 {
 	u32 reg = eccstat[bufnum / 4];
 	int errors = (reg >> ((3 - bufnum % 4) * 8)) & 0xf;

 	if (errors == 0xf) { /* uncorrectable */
 		/* Blank pages fail hw ECC checks */
 		if (is_blank(buf, page_size))
 			return 1;

 		puts("ecc error\n");
 		for (;;)
 			;
 	}

 	return 0;
 }

 static inline void nand_wait(uchar *buf, int bufnum, int page_size)
 {
 	struct fsl_ifc *ifc = IFC_BASE_ADDR;
 	u32 status;
 	u32 eccstat[4];
 	int bufperpage = page_size / 512;
 	int bufnum_end, i;

 	bufnum *= bufperpage;
 	bufnum_end = bufnum + bufperpage - 1;

 	do {
 		status = ifc_in32(&ifc->ifc_nand.nand_evter_stat);
 	} while (!(status & IFC_NAND_EVTER_STAT_OPC));

 	if (status & IFC_NAND_EVTER_STAT_FTOER) {
 		puts("flash time out error\n");
 		for (;;)
 			;
 	}

 	for (i = bufnum / 4; i <= bufnum_end / 4; i++)
 		eccstat[i] = ifc_in32(&ifc->ifc_nand.nand_eccstat[i]);

 	for (i = bufnum; i <= bufnum_end; i++) {
 		if (check_read_ecc(buf, eccstat, i, page_size))
 			break;
 	}

 	ifc_out32(&ifc->ifc_nand.nand_evter_stat, status);
 }

 static inline int bad_block(uchar *marker, int port_size)
 {
 	if (port_size == 8)
 		return __raw_readb(marker) != 0xff;
 	else
 		return __raw_readw((u16 *)marker) != 0xffff;
 }

 int nand_spl_load_image(uint32_t offs, unsigned int uboot_size, void *vdst)
 {
 	struct fsl_ifc *ifc = IFC_BASE_ADDR;
 	uchar *buf = (uchar *)CONFIG_SYS_NAND_BASE;
 	int page_size;
 	int port_size;
 	int pages_per_blk;
 	int blk_size;
 	int bad_marker = 0;
 	int bufnum_mask, bufnum, ver = 0;

 	int csor, cspr;
 	int pos = 0;
 	int j = 0;

 	int sram_addr;
 	int pg_no;
 	uchar *dst = vdst;

 	/* Get NAND Flash configuration */
 	csor = CONFIG_SYS_NAND_CSOR;
 	cspr = CONFIG_SYS_NAND_CSPR;

 	port_size = (cspr & CSPR_PORT_SIZE_16) ? 16 : 8;

 	if ((csor & CSOR_NAND_PGS_MASK) == CSOR_NAND_PGS_8K) {
 		page_size = 8192;
 		bufnum_mask = 0x0;
 	} else if ((csor & CSOR_NAND_PGS_MASK) == CSOR_NAND_PGS_4K) {
 		page_size = 4096;
 		bufnum_mask = 0x1;
 	} else if ((csor & CSOR_NAND_PGS_MASK) == CSOR_NAND_PGS_2K) {
 		page_size = 2048;
 		bufnum_mask = 0x3;
 	} else {
 		page_size = 512;
 		bufnum_mask = 0xf;

 		if (port_size == 8)
 			bad_marker = 5;
 	}

 	ver = ifc_in32(&ifc->ifc_rev);
 	if (ver >= FSL_IFC_V2_0_0)
 		bufnum_mask = (bufnum_mask * 2) + 1;

 	pages_per_blk =
 		32 << ((csor & CSOR_NAND_PB_MASK) >> CSOR_NAND_PB_SHIFT);

 	blk_size = pages_per_blk * page_size;

 	/* Open Full SRAM mapping for spare are access */
 	ifc_out32(&ifc->ifc_nand.ncfgr, 0x0);

 	/* Clear Boot events */
 	ifc_out32(&ifc->ifc_nand.nand_evter_stat, 0xffffffff);

 	/* Program FIR/FCR for Large/Small page */
 	if (page_size > 512) {
 		ifc_out32(&ifc->ifc_nand.nand_fir0,
 			  (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
 			  (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) |
 			  (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) |
 			  (IFC_FIR_OP_CMD1 << IFC_NAND_FIR0_OP3_SHIFT) |
 			  (IFC_FIR_OP_BTRD << IFC_NAND_FIR0_OP4_SHIFT));
 		ifc_out32(&ifc->ifc_nand.nand_fir1, 0x0);

 		ifc_out32(&ifc->ifc_nand.nand_fcr0,
 			  (NAND_CMD_READ0 << IFC_NAND_FCR0_CMD0_SHIFT) |
 			  (NAND_CMD_READSTART << IFC_NAND_FCR0_CMD1_SHIFT));
 	} else {
 		ifc_out32(&ifc->ifc_nand.nand_fir0,
 			  (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
 			  (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) |
 			  (IFC_FIR_OP_RA0  << IFC_NAND_FIR0_OP2_SHIFT) |
 			  (IFC_FIR_OP_BTRD << IFC_NAND_FIR0_OP3_SHIFT));
 		ifc_out32(&ifc->ifc_nand.nand_fir1, 0x0);

 		ifc_out32(&ifc->ifc_nand.nand_fcr0,
 			  NAND_CMD_READ0 << IFC_NAND_FCR0_CMD0_SHIFT);
 	}

 	/* Program FBCR = 0 for full page read */
 	ifc_out32(&ifc->ifc_nand.nand_fbcr, 0);

 	/* Read and copy u-boot on SDRAM from NAND device, In parallel
 	 * check for Bad block if found skip it and read continue to
 	 * next Block
 	 */
 	while (pos < uboot_size) {
 		int i = 0;
 		do {
 			pg_no = offs / page_size;
 			bufnum = pg_no & bufnum_mask;
 			sram_addr = bufnum * page_size * 2;

 			ifc_out32(&ifc->ifc_nand.row0, pg_no);
 			ifc_out32(&ifc->ifc_nand.col0, 0);
 			/* start read */
 			ifc_out32(&ifc->ifc_nand.nandseq_strt,
 				  IFC_NAND_SEQ_STRT_FIR_STRT);

 			/* wait for read to complete */
 			nand_wait(&buf[sram_addr], bufnum, page_size);

 			/*
 			 * If either of the first two pages are marked bad,
 			 * continue to the next block.
 			 */
 			if (i++ < 2 &&
 			    bad_block(&buf[sram_addr + page_size + bad_marker],
 				      port_size)) {
 				puts("skipping\n");
 				offs = (offs + blk_size) & ~(blk_size - 1);
 				pos &= ~(blk_size - 1);
 				break;
 			}

 			for (j = 0; j < page_size; j++)
 				dst[pos + j] = __raw_readb(&buf[sram_addr + j]);

 			pos += page_size;
 			offs += page_size;
 		} while ((offs & (blk_size - 1)) && (pos < uboot_size));
 	}

 	return 0;
 }

 /*
  * Main entrypoint for NAND Boot. It's necessary that SDRAM is already
  * configured and available since this code loads the main U-boot image
  * from NAND into SDRAM and starts from there.
  */
 void nand_boot(void)
 {
 	__attribute__((noreturn)) void (*uboot)(void);
 	/*
 	 * Load U-Boot image from NAND into RAM
 	 */
 	nand_spl_load_image(CONFIG_SYS_NAND_U_BOOT_OFFS,
 			    CONFIG_SYS_NAND_U_BOOT_SIZE,
 			    (uchar *)CONFIG_SYS_NAND_U_BOOT_DST);

 #ifdef CONFIG_NAND_ENV_DST
 	nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
 			    (uchar *)CONFIG_NAND_ENV_DST);

 #ifdef CONFIG_ENV_OFFSET_REDUND
 	nand_spl_load_image(CONFIG_ENV_OFFSET_REDUND, CONFIG_ENV_SIZE,
 			    (uchar *)CONFIG_NAND_ENV_DST + CONFIG_ENV_SIZE);
 #endif
 #endif
 	/*
 	 * Jump to U-Boot image
 	 */
 #ifdef CONFIG_SPL_FLUSH_IMAGE
 	/*
 	 * Clean d-cache and invalidate i-cache, to
 	 * make sure that no stale data is executed.
 	 */
 	flush_cache(CONFIG_SYS_NAND_U_BOOT_DST, CONFIG_SYS_NAND_U_BOOT_SIZE);
 #endif
 	uboot = (void *)CONFIG_SYS_NAND_U_BOOT_START;
 	uboot();
 }

 #ifndef CONFIG_SPL_NAND_INIT
 void nand_init(void)
 {
 }

 void nand_deselect(void)
 {
 }
 #endif
	/*
	* NAND boot for Freescale Integrated Flash Controller, NAND FCM
	*
	* Copyright 2011 Freescale Semiconductor, Inc.
	* Author: Dipen Dudhat <dipen.dudhat@freescale.com>
	*
	* SPDX-License-Identifier: GPL-2.0+
	*/

	#include <common.h>
	#include <asm/io.h>
	#include <fsl_ifc.h>
	#include <linux/mtd/nand.h>

	static inline int is_blank(uchar *addr, int page_size)
	{
	int i;

	for (i = 0; i < page_size; i++) {
	if (__raw_readb(&addr[i]) != 0xff)
	return 0;
	}

	/*
	* For the SPL, don't worry about uncorrectable errors
	* where the main area is all FFs but shouldn't be.
	*/
	return 1;
	}

	/* returns nonzero if entire page is blank */
	static inline int check_read_ecc(uchar buf, u32 eccstat,
	unsigned int bufnum, int page_size)
	{
	u32 reg = eccstat[bufnum / 4];
	int errors = (reg >> ((3 - bufnum % 4) * 8)) & 0xf;

	if (errors == 0xf) { /* uncorrectable */
	/* Blank pages fail hw ECC checks */
	if (is_blank(buf, page_size))
	return 1;

	puts("ecc error\n");
	for (;;)
	;
	}

	return 0;
	}

	static inline void nand_wait(uchar *buf, int bufnum, int page_size)
	{
	struct fsl_ifc *ifc = IFC_BASE_ADDR;
	u32 status;
	u32 eccstat[4];
	int bufperpage = page_size / 512;
	int bufnum_end, i;

	bufnum *= bufperpage;
	bufnum_end = bufnum + bufperpage - 1;

	do {
	status = ifc_in32(&ifc->ifc_nand.nand_evter_stat);
	} while (!(status & IFC_NAND_EVTER_STAT_OPC));

	if (status & IFC_NAND_EVTER_STAT_FTOER) {
	puts("flash time out error\n");
	for (;;)
	;
	}

	for (i = bufnum / 4; i <= bufnum_end / 4; i++)
	eccstat[i] = ifc_in32(&ifc->ifc_nand.nand_eccstat[i]);

	for (i = bufnum; i <= bufnum_end; i++) {
	if (check_read_ecc(buf, eccstat, i, page_size))
	break;
	}

	ifc_out32(&ifc->ifc_nand.nand_evter_stat, status);
	}

	static inline int bad_block(uchar *marker, int port_size)
	{
	if (port_size == 8)
	return __raw_readb(marker) != 0xff;
	else
	return __raw_readw((u16 *)marker) != 0xffff;
	}

	int nand_spl_load_image(uint32_t offs, unsigned int uboot_size, void *vdst)
	{
	struct fsl_ifc *ifc = IFC_BASE_ADDR;
	uchar buf = (uchar )CONFIG_SYS_NAND_BASE;
	int page_size;
	int port_size;
	int pages_per_blk;
	int blk_size;
	int bad_marker = 0;
	int bufnum_mask, bufnum, ver = 0;

	int csor, cspr;
	int pos = 0;
	int j = 0;

	int sram_addr;
	int pg_no;
	uchar *dst = vdst;

	/* Get NAND Flash configuration */
	csor = CONFIG_SYS_NAND_CSOR;
	cspr = CONFIG_SYS_NAND_CSPR;

	port_size = (cspr & CSPR_PORT_SIZE_16) ? 16 : 8;

	if ((csor & CSOR_NAND_PGS_MASK) == CSOR_NAND_PGS_8K) {
	page_size = 8192;
	bufnum_mask = 0x0;
	} else if ((csor & CSOR_NAND_PGS_MASK) == CSOR_NAND_PGS_4K) {
	page_size = 4096;
	bufnum_mask = 0x1;
	} else if ((csor & CSOR_NAND_PGS_MASK) == CSOR_NAND_PGS_2K) {
	page_size = 2048;
	bufnum_mask = 0x3;
	} else {
	page_size = 512;
	bufnum_mask = 0xf;

	if (port_size == 8)
	bad_marker = 5;
	}

	ver = ifc_in32(&ifc->ifc_rev);
	if (ver >= FSL_IFC_V2_0_0)
	bufnum_mask = (bufnum_mask * 2) + 1;

	pages_per_blk =
	32 << ((csor & CSOR_NAND_PB_MASK) >> CSOR_NAND_PB_SHIFT);

	blk_size = pages_per_blk * page_size;

	/* Open Full SRAM mapping for spare are access */
	ifc_out32(&ifc->ifc_nand.ncfgr, 0x0);

	/* Clear Boot events */
	ifc_out32(&ifc->ifc_nand.nand_evter_stat, 0xffffffff);

	/* Program FIR/FCR for Large/Small page */
	if (page_size > 512) {
	ifc_out32(&ifc->ifc_nand.nand_fir0,
	(IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) \|
	(IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) \|
	(IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) \|
	(IFC_FIR_OP_CMD1 << IFC_NAND_FIR0_OP3_SHIFT) \|
	(IFC_FIR_OP_BTRD << IFC_NAND_FIR0_OP4_SHIFT));
	ifc_out32(&ifc->ifc_nand.nand_fir1, 0x0);

	ifc_out32(&ifc->ifc_nand.nand_fcr0,
	(NAND_CMD_READ0 << IFC_NAND_FCR0_CMD0_SHIFT) \|
	(NAND_CMD_READSTART << IFC_NAND_FCR0_CMD1_SHIFT));
	} else {
	ifc_out32(&ifc->ifc_nand.nand_fir0,
	(IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) \|
	(IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) \|
	(IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) \|
	(IFC_FIR_OP_BTRD << IFC_NAND_FIR0_OP3_SHIFT));
	ifc_out32(&ifc->ifc_nand.nand_fir1, 0x0);

	ifc_out32(&ifc->ifc_nand.nand_fcr0,
	NAND_CMD_READ0 << IFC_NAND_FCR0_CMD0_SHIFT);
	}

	/* Program FBCR = 0 for full page read */
	ifc_out32(&ifc->ifc_nand.nand_fbcr, 0);

	/* Read and copy u-boot on SDRAM from NAND device, In parallel
	* check for Bad block if found skip it and read continue to
	* next Block
	*/
	while (pos < uboot_size) {
	int i = 0;
	do {
	pg_no = offs / page_size;
	bufnum = pg_no & bufnum_mask;
	sram_addr = bufnum * page_size * 2;

	ifc_out32(&ifc->ifc_nand.row0, pg_no);
	ifc_out32(&ifc->ifc_nand.col0, 0);
	/* start read */
	ifc_out32(&ifc->ifc_nand.nandseq_strt,
	IFC_NAND_SEQ_STRT_FIR_STRT);

	/* wait for read to complete */
	nand_wait(&buf[sram_addr], bufnum, page_size);

	/*
	* If either of the first two pages are marked bad,
	* continue to the next block.
	*/
	if (i++ < 2 &&
	bad_block(&buf[sram_addr + page_size + bad_marker],
	port_size)) {
	puts("skipping\n");
	offs = (offs + blk_size) & ~(blk_size - 1);
	pos &= ~(blk_size - 1);
	break;
	}

	for (j = 0; j < page_size; j++)
	dst[pos + j] = __raw_readb(&buf[sram_addr + j]);

	pos += page_size;
	offs += page_size;
	} while ((offs & (blk_size - 1)) && (pos < uboot_size));
	}

	return 0;
	}

	/*
	* Main entrypoint for NAND Boot. It's necessary that SDRAM is already
	* configured and available since this code loads the main U-boot image
	* from NAND into SDRAM and starts from there.
	*/
	void nand_boot(void)
	{
	__attribute__((noreturn)) void (*uboot)(void);
	/*
	* Load U-Boot image from NAND into RAM
	*/
	nand_spl_load_image(CONFIG_SYS_NAND_U_BOOT_OFFS,
	CONFIG_SYS_NAND_U_BOOT_SIZE,
	(uchar *)CONFIG_SYS_NAND_U_BOOT_DST);

	#ifdef CONFIG_NAND_ENV_DST
	nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
	(uchar *)CONFIG_NAND_ENV_DST);

	#ifdef CONFIG_ENV_OFFSET_REDUND
	nand_spl_load_image(CONFIG_ENV_OFFSET_REDUND, CONFIG_ENV_SIZE,
	(uchar *)CONFIG_NAND_ENV_DST + CONFIG_ENV_SIZE);
	#endif
	#endif
	/*
	* Jump to U-Boot image
	*/
	#ifdef CONFIG_SPL_FLUSH_IMAGE
	/*
	* Clean d-cache and invalidate i-cache, to
	* make sure that no stale data is executed.
	*/
	flush_cache(CONFIG_SYS_NAND_U_BOOT_DST, CONFIG_SYS_NAND_U_BOOT_SIZE);
	#endif
	uboot = (void *)CONFIG_SYS_NAND_U_BOOT_START;
	uboot();
	}

	#ifndef CONFIG_SPL_NAND_INIT
	void nand_init(void)
	{
	}

	void nand_deselect(void)
	{
	}
	#endif