drivers/spi/exynos_spi.c - filogic/uboot - Gitiles

 /*
  * (C) Copyright 2012 SAMSUNG Electronics
  * Padmavathi Venna <padma.v@samsung.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */

 #include <common.h>
 #include <malloc.h>
 #include <spi.h>
 #include <fdtdec.h>
 #include <asm/arch/clk.h>
 #include <asm/arch/clock.h>
 #include <asm/arch/cpu.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/pinmux.h>
 #include <asm/arch-exynos/spi.h>
 #include <asm/io.h>

 DECLARE_GLOBAL_DATA_PTR;

 /* Information about each SPI controller */
 struct spi_bus {
 	enum periph_id periph_id;
 	s32 frequency;		/* Default clock frequency, -1 for none */
 	struct exynos_spi *regs;
 	int inited;		/* 1 if this bus is ready for use */
 	int node;
 };

 /* A list of spi buses that we know about */
 static struct spi_bus spi_bus[EXYNOS5_SPI_NUM_CONTROLLERS];
 static unsigned int bus_count;

 struct exynos_spi_slave {
 	struct spi_slave slave;
 	struct exynos_spi *regs;
 	unsigned int freq;		/* Default frequency */
 	unsigned int mode;
 	enum periph_id periph_id;	/* Peripheral ID for this device */
 	unsigned int fifo_size;
 };

 static struct spi_bus *spi_get_bus(unsigned dev_index)
 {
 	if (dev_index < bus_count)
 		return &spi_bus[dev_index];
 	debug("%s: invalid bus %d", __func__, dev_index);

 	return NULL;
 }

 static inline struct exynos_spi_slave *to_exynos_spi(struct spi_slave *slave)
 {
 	return container_of(slave, struct exynos_spi_slave, slave);
 }

 /**
  * Setup the driver private data
  *
  * @param bus		ID of the bus that the slave is attached to
  * @param cs		ID of the chip select connected to the slave
  * @param max_hz	Required spi frequency
  * @param mode		Required spi mode (clk polarity, clk phase and
  *			master or slave)
  * @return new device or NULL
  */
 struct spi_slave *spi_setup_slave(unsigned int busnum, unsigned int cs,
 			unsigned int max_hz, unsigned int mode)
 {
 	struct exynos_spi_slave *spi_slave;
 	struct spi_bus *bus;

 	if (!spi_cs_is_valid(busnum, cs)) {
 		debug("%s: Invalid bus/chip select %d, %d\n", __func__,
 		      busnum, cs);
 		return NULL;
 	}

 	spi_slave = malloc(sizeof(*spi_slave));
 	if (!spi_slave) {
 		debug("%s: Could not allocate spi_slave\n", __func__);
 		return NULL;
 	}

 	bus = &spi_bus[busnum];
 	spi_slave->slave.bus = busnum;
 	spi_slave->slave.cs = cs;
 	spi_slave->regs = bus->regs;
 	spi_slave->mode = mode;
 	spi_slave->periph_id = bus->periph_id;
 	if (bus->periph_id == PERIPH_ID_SPI1 ||
 	    bus->periph_id == PERIPH_ID_SPI2)
 		spi_slave->fifo_size = 64;
 	else
 		spi_slave->fifo_size = 256;

 	spi_slave->freq = bus->frequency;
 	if (max_hz)
 		spi_slave->freq = min(max_hz, spi_slave->freq);

 	return &spi_slave->slave;
 }

 /**
  * Free spi controller
  *
  * @param slave	Pointer to spi_slave to which controller has to
  *		communicate with
  */
 void spi_free_slave(struct spi_slave *slave)
 {
 	struct exynos_spi_slave *spi_slave = to_exynos_spi(slave);

 	free(spi_slave);
 }

 /**
  * Flush spi tx, rx fifos and reset the SPI controller
  *
  * @param slave	Pointer to spi_slave to which controller has to
  *		communicate with
  */
 static void spi_flush_fifo(struct spi_slave *slave)
 {
 	struct exynos_spi_slave *spi_slave = to_exynos_spi(slave);
 	struct exynos_spi *regs = spi_slave->regs;

 	clrsetbits_le32(&regs->ch_cfg, SPI_CH_HS_EN, SPI_CH_RST);
 	clrbits_le32(&regs->ch_cfg, SPI_CH_RST);
 	setbits_le32(&regs->ch_cfg, SPI_TX_CH_ON | SPI_RX_CH_ON);
 }

 /**
  * Initialize the spi base registers, set the required clock frequency and
  * initialize the gpios
  *
  * @param slave	Pointer to spi_slave to which controller has to
  *		communicate with
  * @return zero on success else a negative value
  */
 int spi_claim_bus(struct spi_slave *slave)
 {
 	struct exynos_spi_slave *spi_slave = to_exynos_spi(slave);
 	struct exynos_spi *regs = spi_slave->regs;
 	u32 reg = 0;
 	int ret;

 	ret = set_spi_clk(spi_slave->periph_id,
 					spi_slave->freq);
 	if (ret < 0) {
 		debug("%s: Failed to setup spi clock\n", __func__);
 		return ret;
 	}

 	exynos_pinmux_config(spi_slave->periph_id, PINMUX_FLAG_NONE);

 	spi_flush_fifo(slave);

 	reg = readl(&regs->ch_cfg);
 	reg &= ~(SPI_CH_CPHA_B | SPI_CH_CPOL_L);

 	if (spi_slave->mode & SPI_CPHA)
 		reg |= SPI_CH_CPHA_B;

 	if (spi_slave->mode & SPI_CPOL)
 		reg |= SPI_CH_CPOL_L;

 	writel(reg, &regs->ch_cfg);
 	writel(SPI_FB_DELAY_180, &regs->fb_clk);

 	return 0;
 }

 /**
  * Reset the spi H/W and flush the tx and rx fifos
  *
  * @param slave	Pointer to spi_slave to which controller has to
  *		communicate with
  */
 void spi_release_bus(struct spi_slave *slave)
 {
 	spi_flush_fifo(slave);
 }

 static void spi_get_fifo_levels(struct exynos_spi *regs,
 	int *rx_lvl, int *tx_lvl)
 {
 	uint32_t spi_sts = readl(&regs->spi_sts);

 	*rx_lvl = (spi_sts >> SPI_RX_LVL_OFFSET) & SPI_FIFO_LVL_MASK;
 	*tx_lvl = (spi_sts >> SPI_TX_LVL_OFFSET) & SPI_FIFO_LVL_MASK;
 }

 /**
  * If there's something to transfer, do a software reset and set a
  * transaction size.
  *
  * @param regs	SPI peripheral registers
  * @param count	Number of bytes to transfer
  */
 static void spi_request_bytes(struct exynos_spi *regs, int count)
 {
 	assert(count && count < (1 << 16));
 	setbits_le32(&regs->ch_cfg, SPI_CH_RST);
 	clrbits_le32(&regs->ch_cfg, SPI_CH_RST);
 	writel(count | SPI_PACKET_CNT_EN, &regs->pkt_cnt);
 }

 static void spi_rx_tx(struct exynos_spi_slave *spi_slave, int todo,
 			void **dinp, void const **doutp)
 {
 	struct exynos_spi *regs = spi_slave->regs;
 	uchar *rxp = *dinp;
 	const uchar *txp = *doutp;
 	int rx_lvl, tx_lvl;
 	uint out_bytes, in_bytes;

 	out_bytes = in_bytes = todo;

 	/*
 	 * If there's something to send, do a software reset and set a
 	 * transaction size.
 	 */
 	spi_request_bytes(regs, todo);

 	/*
 	 * Bytes are transmitted/received in pairs. Wait to receive all the
 	 * data because then transmission will be done as well.
 	 */
 	while (in_bytes) {
 		int temp;

 		/* Keep the fifos full/empty. */
 		spi_get_fifo_levels(regs, &rx_lvl, &tx_lvl);
 		if (tx_lvl < spi_slave->fifo_size && out_bytes) {
 			temp = txp ? *txp++ : 0xff;
 			writel(temp, &regs->tx_data);
 			out_bytes--;
 		}
 		if (rx_lvl > 0 && in_bytes) {
 			temp = readl(&regs->rx_data);
 			if (rxp)
 				*rxp++ = temp;
 			in_bytes--;
 		}
 	}
 	*dinp = rxp;
 	*doutp = txp;
 }

 /**
  * Transfer and receive data
  *
  * @param slave		Pointer to spi_slave to which controller has to
  *			communicate with
  * @param bitlen	No of bits to tranfer or receive
  * @param dout		Pointer to transfer buffer
  * @param din		Pointer to receive buffer
  * @param flags		Flags for transfer begin and end
  * @return zero on success else a negative value
  */
 int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
 	     void *din, unsigned long flags)
 {
 	struct exynos_spi_slave *spi_slave = to_exynos_spi(slave);
 	int upto, todo;
 	int bytelen;

 	/* spi core configured to do 8 bit transfers */
 	if (bitlen % 8) {
 		debug("Non byte aligned SPI transfer.\n");
 		return -1;
 	}

 	/* Start the transaction, if necessary. */
 	if ((flags & SPI_XFER_BEGIN))
 		spi_cs_activate(slave);

 	/* Exynos SPI limits each transfer to 65535 bytes */
 	bytelen =  bitlen / 8;
 	for (upto = 0; upto < bytelen; upto += todo) {
 		todo = min(bytelen - upto, (1 << 16) - 1);
 		spi_rx_tx(spi_slave, todo, &din, &dout);
 	}

 	/* Stop the transaction, if necessary. */
 	if ((flags & SPI_XFER_END))
 		spi_cs_deactivate(slave);

 	return 0;
 }

 /**
  * Validates the bus and chip select numbers
  *
  * @param bus	ID of the bus that the slave is attached to
  * @param cs	ID of the chip select connected to the slave
  * @return one on success else zero
  */
 int spi_cs_is_valid(unsigned int bus, unsigned int cs)
 {
 	return spi_get_bus(bus) && cs == 0;
 }

 /**
  * Activate the CS by driving it LOW
  *
  * @param slave	Pointer to spi_slave to which controller has to
  *		communicate with
  */
 void spi_cs_activate(struct spi_slave *slave)
 {
 	struct exynos_spi_slave *spi_slave = to_exynos_spi(slave);

 	clrbits_le32(&spi_slave->regs->cs_reg, SPI_SLAVE_SIG_INACT);
 	debug("Activate CS, bus %d\n", spi_slave->slave.bus);
 }

 /**
  * Deactivate the CS by driving it HIGH
  *
  * @param slave	Pointer to spi_slave to which controller has to
  *		communicate with
  */
 void spi_cs_deactivate(struct spi_slave *slave)
 {
 	struct exynos_spi_slave *spi_slave = to_exynos_spi(slave);

 	setbits_le32(&spi_slave->regs->cs_reg, SPI_SLAVE_SIG_INACT);
 	debug("Deactivate CS, bus %d\n", spi_slave->slave.bus);
 }

 static inline struct exynos_spi *get_spi_base(int dev_index)
 {
 	if (dev_index < 3)
 		return (struct exynos_spi *)samsung_get_base_spi() + dev_index;
 	else
 		return (struct exynos_spi *)samsung_get_base_spi_isp() +
 					(dev_index - 3);
 }

 /*
  * Read the SPI config from the device tree node.
  *
  * @param blob  FDT blob to read from
  * @param node  Node offset to read from
  * @param bus   SPI bus structure to fill with information
  * @return 0 if ok, or -FDT_ERR_NOTFOUND if something was missing
  */
 #ifdef CONFIG_OF_CONTROL
 static int spi_get_config(const void *blob, int node, struct spi_bus *bus)
 {
 	bus->node = node;
 	bus->regs = (struct exynos_spi *)fdtdec_get_addr(blob, node, "reg");
 	bus->periph_id = pinmux_decode_periph_id(blob, node);

 	if (bus->periph_id == PERIPH_ID_NONE) {
 		debug("%s: Invalid peripheral ID %d\n", __func__,
 			bus->periph_id);
 		return -FDT_ERR_NOTFOUND;
 	}

 	/* Use 500KHz as a suitable default */
 	bus->frequency = fdtdec_get_int(blob, node, "spi-max-frequency",
 					500000);

 	return 0;
 }

 /*
  * Process a list of nodes, adding them to our list of SPI ports.
  *
  * @param blob          fdt blob
  * @param node_list     list of nodes to process (any <=0 are ignored)
  * @param count         number of nodes to process
  * @param is_dvc        1 if these are DVC ports, 0 if standard I2C
  * @return 0 if ok, -1 on error
  */
 static int process_nodes(const void *blob, int node_list[], int count)
 {
 	int i;

 	/* build the i2c_controllers[] for each controller */
 	for (i = 0; i < count; i++) {
 		int node = node_list[i];
 		struct spi_bus *bus;

 		if (node <= 0)
 			continue;

 		bus = &spi_bus[i];
 		if (spi_get_config(blob, node, bus)) {
 			printf("exynos spi_init: failed to decode bus %d\n",
 				i);
 			return -1;
 		}

 		debug("spi: controller bus %d at %p, periph_id %d\n",
 		      i, bus->regs, bus->periph_id);
 		bus->inited = 1;
 		bus_count++;
 	}

 	return 0;
 }
 #endif

 /* Sadly there is no error return from this function */
 void spi_init(void)
 {
 	int count;

 #ifdef CONFIG_OF_CONTROL
 	int node_list[EXYNOS5_SPI_NUM_CONTROLLERS];
 	const void *blob = gd->fdt_blob;

 	count = fdtdec_find_aliases_for_id(blob, "spi",
 			COMPAT_SAMSUNG_EXYNOS_SPI, node_list,
 			EXYNOS5_SPI_NUM_CONTROLLERS);
 	if (process_nodes(blob, node_list, count))
 		return;

 #else
 	struct spi_bus *bus;

 	for (count = 0; count < EXYNOS5_SPI_NUM_CONTROLLERS; count++) {
 		bus = &spi_bus[count];
 		bus->regs = get_spi_base(count);
 		bus->periph_id = PERIPH_ID_SPI0 + count;

 		/* Although Exynos5 supports upto 50Mhz speed,
 		 * we are setting it to 10Mhz for safe side
 		 */
 		bus->frequency = 10000000;
 		bus->inited = 1;
 		bus->node = 0;
 		bus_count = EXYNOS5_SPI_NUM_CONTROLLERS;
 	}
 #endif
 }
	/*
	* (C) Copyright 2012 SAMSUNG Electronics
	* Padmavathi Venna <padma.v@samsung.com>
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License as published by
	* the Free Software Foundation; either version 2 of the License, or
	* (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
	*/

	#include <common.h>
	#include <malloc.h>
	#include <spi.h>
	#include <fdtdec.h>
	#include <asm/arch/clk.h>
	#include <asm/arch/clock.h>
	#include <asm/arch/cpu.h>
	#include <asm/arch/gpio.h>
	#include <asm/arch/pinmux.h>
	#include <asm/arch-exynos/spi.h>
	#include <asm/io.h>

	DECLARE_GLOBAL_DATA_PTR;

	/* Information about each SPI controller */
	struct spi_bus {
	enum periph_id periph_id;
	s32 frequency; /* Default clock frequency, -1 for none */
	struct exynos_spi *regs;
	int inited; /* 1 if this bus is ready for use */
	int node;
	};

	/* A list of spi buses that we know about */
	static struct spi_bus spi_bus[EXYNOS5_SPI_NUM_CONTROLLERS];
	static unsigned int bus_count;

	struct exynos_spi_slave {
	struct spi_slave slave;
	struct exynos_spi *regs;
	unsigned int freq; /* Default frequency */
	unsigned int mode;
	enum periph_id periph_id; /* Peripheral ID for this device */
	unsigned int fifo_size;
	};

	static struct spi_bus *spi_get_bus(unsigned dev_index)
	{
	if (dev_index < bus_count)
	return &spi_bus[dev_index];
	debug("%s: invalid bus %d", __func__, dev_index);

	return NULL;
	}

	static inline struct exynos_spi_slave to_exynos_spi(struct spi_slave slave)
	{
	return container_of(slave, struct exynos_spi_slave, slave);
	}

	/**
	* Setup the driver private data
	*
	* @param bus ID of the bus that the slave is attached to
	* @param cs ID of the chip select connected to the slave
	* @param max_hz Required spi frequency
	* @param mode Required spi mode (clk polarity, clk phase and
	* master or slave)
	* @return new device or NULL
	*/
	struct spi_slave *spi_setup_slave(unsigned int busnum, unsigned int cs,
	unsigned int max_hz, unsigned int mode)
	{
	struct exynos_spi_slave *spi_slave;
	struct spi_bus *bus;

	if (!spi_cs_is_valid(busnum, cs)) {
	debug("%s: Invalid bus/chip select %d, %d\n", __func__,
	busnum, cs);
	return NULL;
	}

	spi_slave = malloc(sizeof(*spi_slave));
	if (!spi_slave) {
	debug("%s: Could not allocate spi_slave\n", __func__);
	return NULL;
	}

	bus = &spi_bus[busnum];
	spi_slave->slave.bus = busnum;
	spi_slave->slave.cs = cs;
	spi_slave->regs = bus->regs;
	spi_slave->mode = mode;
	spi_slave->periph_id = bus->periph_id;
	if (bus->periph_id == PERIPH_ID_SPI1 \|\|
	bus->periph_id == PERIPH_ID_SPI2)
	spi_slave->fifo_size = 64;
	else
	spi_slave->fifo_size = 256;

	spi_slave->freq = bus->frequency;
	if (max_hz)
	spi_slave->freq = min(max_hz, spi_slave->freq);

	return &spi_slave->slave;
	}

	/**
	* Free spi controller
	*
	* @param slave Pointer to spi_slave to which controller has to
	* communicate with
	*/
	void spi_free_slave(struct spi_slave *slave)
	{
	struct exynos_spi_slave *spi_slave = to_exynos_spi(slave);

	free(spi_slave);
	}

	/**
	* Flush spi tx, rx fifos and reset the SPI controller
	*
	* @param slave Pointer to spi_slave to which controller has to
	* communicate with
	*/
	static void spi_flush_fifo(struct spi_slave *slave)
	{
	struct exynos_spi_slave *spi_slave = to_exynos_spi(slave);
	struct exynos_spi *regs = spi_slave->regs;

	clrsetbits_le32(&regs->ch_cfg, SPI_CH_HS_EN, SPI_CH_RST);
	clrbits_le32(&regs->ch_cfg, SPI_CH_RST);
	setbits_le32(&regs->ch_cfg, SPI_TX_CH_ON \| SPI_RX_CH_ON);
	}

	/**
	* Initialize the spi base registers, set the required clock frequency and
	* initialize the gpios
	*
	* @param slave Pointer to spi_slave to which controller has to
	* communicate with
	* @return zero on success else a negative value
	*/
	int spi_claim_bus(struct spi_slave *slave)
	{
	struct exynos_spi_slave *spi_slave = to_exynos_spi(slave);
	struct exynos_spi *regs = spi_slave->regs;
	u32 reg = 0;
	int ret;

	ret = set_spi_clk(spi_slave->periph_id,
	spi_slave->freq);
	if (ret < 0) {
	debug("%s: Failed to setup spi clock\n", __func__);
	return ret;
	}

	exynos_pinmux_config(spi_slave->periph_id, PINMUX_FLAG_NONE);

	spi_flush_fifo(slave);

	reg = readl(&regs->ch_cfg);
	reg &= ~(SPI_CH_CPHA_B \| SPI_CH_CPOL_L);

	if (spi_slave->mode & SPI_CPHA)
	reg \|= SPI_CH_CPHA_B;

	if (spi_slave->mode & SPI_CPOL)
	reg \|= SPI_CH_CPOL_L;

	writel(reg, &regs->ch_cfg);
	writel(SPI_FB_DELAY_180, &regs->fb_clk);

	return 0;
	}

	/**
	* Reset the spi H/W and flush the tx and rx fifos
	*
	* @param slave Pointer to spi_slave to which controller has to
	* communicate with
	*/
	void spi_release_bus(struct spi_slave *slave)
	{
	spi_flush_fifo(slave);
	}

	static void spi_get_fifo_levels(struct exynos_spi *regs,
	int rx_lvl, int tx_lvl)
	{
	uint32_t spi_sts = readl(&regs->spi_sts);

	*rx_lvl = (spi_sts >> SPI_RX_LVL_OFFSET) & SPI_FIFO_LVL_MASK;
	*tx_lvl = (spi_sts >> SPI_TX_LVL_OFFSET) & SPI_FIFO_LVL_MASK;
	}

	/**
	* If there's something to transfer, do a software reset and set a
	* transaction size.
	*
	* @param regs SPI peripheral registers
	* @param count Number of bytes to transfer
	*/
	static void spi_request_bytes(struct exynos_spi *regs, int count)
	{
	assert(count && count < (1 << 16));
	setbits_le32(&regs->ch_cfg, SPI_CH_RST);
	clrbits_le32(&regs->ch_cfg, SPI_CH_RST);
	writel(count \| SPI_PACKET_CNT_EN, &regs->pkt_cnt);
	}

	static void spi_rx_tx(struct exynos_spi_slave *spi_slave, int todo,
	void dinp, void const doutp)
	{
	struct exynos_spi *regs = spi_slave->regs;
	uchar rxp = dinp;
	const uchar txp = doutp;
	int rx_lvl, tx_lvl;
	uint out_bytes, in_bytes;

	out_bytes = in_bytes = todo;

	/*
	* If there's something to send, do a software reset and set a
	* transaction size.
	*/
	spi_request_bytes(regs, todo);

	/*
	* Bytes are transmitted/received in pairs. Wait to receive all the
	* data because then transmission will be done as well.
	*/
	while (in_bytes) {
	int temp;

	/* Keep the fifos full/empty. */
	spi_get_fifo_levels(regs, &rx_lvl, &tx_lvl);
	if (tx_lvl < spi_slave->fifo_size && out_bytes) {
	temp = txp ? *txp++ : 0xff;
	writel(temp, &regs->tx_data);
	out_bytes--;
	}
	if (rx_lvl > 0 && in_bytes) {
	temp = readl(&regs->rx_data);
	if (rxp)
	*rxp++ = temp;
	in_bytes--;
	}
	}
	*dinp = rxp;
	*doutp = txp;
	}

	/**
	* Transfer and receive data
	*
	* @param slave Pointer to spi_slave to which controller has to
	* communicate with
	* @param bitlen No of bits to tranfer or receive
	* @param dout Pointer to transfer buffer
	* @param din Pointer to receive buffer
	* @param flags Flags for transfer begin and end
	* @return zero on success else a negative value
	*/
	int spi_xfer(struct spi_slave slave, unsigned int bitlen, const void dout,
	void *din, unsigned long flags)
	{
	struct exynos_spi_slave *spi_slave = to_exynos_spi(slave);
	int upto, todo;
	int bytelen;

	/* spi core configured to do 8 bit transfers */
	if (bitlen % 8) {
	debug("Non byte aligned SPI transfer.\n");
	return -1;
	}

	/* Start the transaction, if necessary. */
	if ((flags & SPI_XFER_BEGIN))
	spi_cs_activate(slave);

	/* Exynos SPI limits each transfer to 65535 bytes */
	bytelen = bitlen / 8;
	for (upto = 0; upto < bytelen; upto += todo) {
	todo = min(bytelen - upto, (1 << 16) - 1);
	spi_rx_tx(spi_slave, todo, &din, &dout);
	}

	/* Stop the transaction, if necessary. */
	if ((flags & SPI_XFER_END))
	spi_cs_deactivate(slave);

	return 0;
	}

	/**
	* Validates the bus and chip select numbers
	*
	* @param bus ID of the bus that the slave is attached to
	* @param cs ID of the chip select connected to the slave
	* @return one on success else zero
	*/
	int spi_cs_is_valid(unsigned int bus, unsigned int cs)
	{
	return spi_get_bus(bus) && cs == 0;
	}

	/**
	* Activate the CS by driving it LOW
	*
	* @param slave Pointer to spi_slave to which controller has to
	* communicate with
	*/
	void spi_cs_activate(struct spi_slave *slave)
	{
	struct exynos_spi_slave *spi_slave = to_exynos_spi(slave);

	clrbits_le32(&spi_slave->regs->cs_reg, SPI_SLAVE_SIG_INACT);
	debug("Activate CS, bus %d\n", spi_slave->slave.bus);
	}

	/**
	* Deactivate the CS by driving it HIGH
	*
	* @param slave Pointer to spi_slave to which controller has to
	* communicate with
	*/
	void spi_cs_deactivate(struct spi_slave *slave)
	{
	struct exynos_spi_slave *spi_slave = to_exynos_spi(slave);

	setbits_le32(&spi_slave->regs->cs_reg, SPI_SLAVE_SIG_INACT);
	debug("Deactivate CS, bus %d\n", spi_slave->slave.bus);
	}

	static inline struct exynos_spi *get_spi_base(int dev_index)
	{
	if (dev_index < 3)
	return (struct exynos_spi *)samsung_get_base_spi() + dev_index;
	else
	return (struct exynos_spi *)samsung_get_base_spi_isp() +
	(dev_index - 3);
	}

	/*
	* Read the SPI config from the device tree node.
	*
	* @param blob FDT blob to read from
	* @param node Node offset to read from
	* @param bus SPI bus structure to fill with information
	* @return 0 if ok, or -FDT_ERR_NOTFOUND if something was missing
	*/
	#ifdef CONFIG_OF_CONTROL
	static int spi_get_config(const void blob, int node, struct spi_bus bus)
	{
	bus->node = node;
	bus->regs = (struct exynos_spi *)fdtdec_get_addr(blob, node, "reg");
	bus->periph_id = pinmux_decode_periph_id(blob, node);

	if (bus->periph_id == PERIPH_ID_NONE) {
	debug("%s: Invalid peripheral ID %d\n", __func__,
	bus->periph_id);
	return -FDT_ERR_NOTFOUND;
	}

	/* Use 500KHz as a suitable default */
	bus->frequency = fdtdec_get_int(blob, node, "spi-max-frequency",
	500000);

	return 0;
	}

	/*
	* Process a list of nodes, adding them to our list of SPI ports.
	*
	* @param blob fdt blob
	* @param node_list list of nodes to process (any <=0 are ignored)
	* @param count number of nodes to process
	* @param is_dvc 1 if these are DVC ports, 0 if standard I2C
	* @return 0 if ok, -1 on error
	*/
	static int process_nodes(const void *blob, int node_list[], int count)
	{
	int i;

	/* build the i2c_controllers[] for each controller */
	for (i = 0; i < count; i++) {
	int node = node_list[i];
	struct spi_bus *bus;

	if (node <= 0)
	continue;

	bus = &spi_bus[i];
	if (spi_get_config(blob, node, bus)) {
	printf("exynos spi_init: failed to decode bus %d\n",
	i);
	return -1;
	}

	debug("spi: controller bus %d at %p, periph_id %d\n",
	i, bus->regs, bus->periph_id);
	bus->inited = 1;
	bus_count++;
	}

	return 0;
	}
	#endif

	/* Sadly there is no error return from this function */
	void spi_init(void)
	{
	int count;

	#ifdef CONFIG_OF_CONTROL
	int node_list[EXYNOS5_SPI_NUM_CONTROLLERS];
	const void *blob = gd->fdt_blob;

	count = fdtdec_find_aliases_for_id(blob, "spi",
	COMPAT_SAMSUNG_EXYNOS_SPI, node_list,
	EXYNOS5_SPI_NUM_CONTROLLERS);
	if (process_nodes(blob, node_list, count))
	return;

	#else
	struct spi_bus *bus;

	for (count = 0; count < EXYNOS5_SPI_NUM_CONTROLLERS; count++) {
	bus = &spi_bus[count];
	bus->regs = get_spi_base(count);
	bus->periph_id = PERIPH_ID_SPI0 + count;

	/* Although Exynos5 supports upto 50Mhz speed,
	* we are setting it to 10Mhz for safe side
	*/
	bus->frequency = 10000000;
	bus->inited = 1;
	bus->node = 0;
	bus_count = EXYNOS5_SPI_NUM_CONTROLLERS;
	}
	#endif
	}