Add Sandburst Metrobox and Sandburst Karef board support packages.
Second serial port on 440GX now defined as a system device.
Add 'Short Etch' code for Cicada PHY within 440gx_enet.c
Patch by Travis B. Sawyer, 12 Jul 2005
Check return value of malloc in 440gx_enet.c
Patch by Travis B. Sawyer, 18 Jul 2005
diff --git a/board/sandburst/common/flash.c b/board/sandburst/common/flash.c
new file mode 100644
index 0000000..762fb73
--- /dev/null
+++ b/board/sandburst/common/flash.c
@@ -0,0 +1,512 @@
+/*
+ * (C) Copyright 2002-2005
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2002 Jun Gu <jung@artesyncp.com>
+ * Add support for Am29F016D and dynamic switch setting.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+/*
+ * Ported from Ebony flash support
+ * Travis B. Sawyer
+ * Sandburst Corporation
+ */
+#include <common.h>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+
+
+#undef DEBUG
+#ifdef DEBUG
+#define DEBUGF(x...) printf(x)
+#else
+#define DEBUGF(x...)
+#endif /* DEBUG */
+
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+
+static unsigned long flash_addr_table[8][CFG_MAX_FLASH_BANKS] = {
+ {0xfff80000} /* Boot Flash */
+};
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size (vu_long *addr, flash_info_t *info);
+static int write_word (flash_info_t *info, ulong dest, ulong data);
+
+
+#define ADDR0 0x5555
+#define ADDR1 0x2aaa
+#define FLASH_WORD_SIZE unsigned char
+
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+ unsigned long total_b = 0;
+ unsigned long size_b[CFG_MAX_FLASH_BANKS];
+ unsigned short index = 0;
+ int i;
+
+
+ DEBUGF("\n");
+ DEBUGF("FLASH: Index: %d\n", index);
+
+ /* Init: no FLASHes known */
+ for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+ flash_info[i].flash_id = FLASH_UNKNOWN;
+ flash_info[i].sector_count = -1;
+ flash_info[i].size = 0;
+
+ /* check whether the address is 0 */
+ if (flash_addr_table[index][i] == 0) {
+ continue;
+ }
+
+ /* call flash_get_size() to initialize sector address */
+ size_b[i] = flash_get_size(
+ (vu_long *)flash_addr_table[index][i], &flash_info[i]);
+ flash_info[i].size = size_b[i];
+ if (flash_info[i].flash_id == FLASH_UNKNOWN) {
+ printf ("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n",
+ i, size_b[i], size_b[i]<<20);
+ flash_info[i].sector_count = -1;
+ flash_info[i].size = 0;
+ }
+
+ total_b += flash_info[i].size;
+ }
+
+ return total_b;
+}
+
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info (flash_info_t *info)
+{
+ int i;
+ int k;
+ int size;
+ int erased;
+ volatile unsigned long *flash;
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("missing or unknown FLASH type\n");
+ return;
+ }
+
+ switch (info->flash_id & FLASH_VENDMASK) {
+ case FLASH_MAN_AMD: printf ("AMD "); break;
+ default: printf ("Unknown Vendor "); break;
+ }
+
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case FLASH_AM040: printf ("AM29F040 (512 Kbit, uniform sector size)\n");
+ break;
+ default: printf ("Unknown Chip Type\n");
+ break;
+ }
+
+ printf (" Size: %ld KB in %d Sectors\n",
+ info->size >> 10, info->sector_count);
+
+ printf (" Sector Start Addresses:");
+ for (i=0; i<info->sector_count; ++i) {
+ /*
+ * Check if whole sector is erased
+ */
+ if (i != (info->sector_count-1))
+ size = info->start[i+1] - info->start[i];
+ else
+ size = info->start[0] + info->size - info->start[i];
+ erased = 1;
+ flash = (volatile unsigned long *)info->start[i];
+ size = size >> 2; /* divide by 4 for longword access */
+ for (k=0; k<size; k++)
+ {
+ if (*flash++ != 0xffffffff)
+ {
+ erased = 0;
+ break;
+ }
+ }
+
+ if ((i % 5) == 0)
+ printf ("\n ");
+ printf (" %08lX%s%s",
+ info->start[i],
+ erased ? " E" : " ",
+ info->protect[i] ? "RO " : " "
+ );
+ }
+ printf ("\n");
+ return;
+ }
+
+/*-----------------------------------------------------------------------
+ */
+
+
+/*-----------------------------------------------------------------------
+ */
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+static ulong flash_get_size (vu_long *addr, flash_info_t *info)
+{
+ short i;
+ FLASH_WORD_SIZE value;
+ ulong base = (ulong)addr;
+ volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *)addr;
+
+ DEBUGF("FLASH ADDR: %08x\n", (unsigned)addr );
+
+ /* Write auto select command: read Manufacturer ID */
+ udelay(10000);
+ addr2[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
+ udelay(1000);
+ addr2[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
+ udelay(1000);
+ addr2[ADDR0] = (FLASH_WORD_SIZE)0x00900090;
+ udelay(1000);
+
+ value = addr2[0];
+
+ DEBUGF("FLASH MANUFACT: %x\n", value);
+
+ switch (value) {
+ case (FLASH_WORD_SIZE)AMD_MANUFACT:
+ info->flash_id = FLASH_MAN_AMD;
+ break;
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ info->sector_count = 0;
+ info->size = 0;
+ return (0); /* no or unknown flash */
+ }
+
+ value = addr2[1]; /* device ID */
+
+ DEBUGF("\nFLASH DEVICEID: %x\n", value);
+
+ switch (value) {
+ case (FLASH_WORD_SIZE)AMD_ID_LV040B:
+ info->flash_id += FLASH_AM040;
+ info->sector_count = 8;
+ info->size = 0x00080000; /* => 512 kb */
+ break;
+
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ return (0); /* => no or unknown flash */
+
+ }
+
+ /* set up sector start address table */
+ if (info->flash_id == FLASH_AM040) {
+ for (i = 0; i < info->sector_count; i++)
+ info->start[i] = base + (i * 0x00010000);
+ } else {
+ if (info->flash_id & FLASH_BTYPE) {
+ /* set sector offsets for bottom boot block type */
+ info->start[0] = base + 0x00000000;
+ info->start[1] = base + 0x00004000;
+ info->start[2] = base + 0x00006000;
+ info->start[3] = base + 0x00008000;
+ for (i = 4; i < info->sector_count; i++) {
+ info->start[i] = base + (i * 0x00010000) - 0x00030000;
+ }
+ } else {
+ /* set sector offsets for top boot block type */
+ i = info->sector_count - 1;
+ info->start[i--] = base + info->size - 0x00004000;
+ info->start[i--] = base + info->size - 0x00006000;
+ info->start[i--] = base + info->size - 0x00008000;
+ for (; i >= 0; i--) {
+ info->start[i] = base + i * 0x00010000;
+ }
+ }
+ }
+
+ /* check for protected sectors */
+ for (i = 0; i < info->sector_count; i++) {
+ /* read sector protection at sector address, (A7 .. A0) = 0x02 */
+ /* D0 = 1 if protected */
+ addr2 = (volatile FLASH_WORD_SIZE *)(info->start[i]);
+ if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST)
+ info->protect[i] = 0;
+ else
+ info->protect[i] = addr2[2] & 1;
+ }
+
+ /* reset to return to reading data */
+ addr2[0] = (FLASH_WORD_SIZE) 0x00F000F0; /* reset bank */
+
+ /*
+ * Prevent writes to uninitialized FLASH.
+ */
+ if (info->flash_id != FLASH_UNKNOWN) {
+ addr2 = (FLASH_WORD_SIZE *)info->start[0];
+ *addr2 = (FLASH_WORD_SIZE)0x00F000F0; /* reset bank */
+ }
+
+ return (info->size);
+}
+
+int wait_for_DQ7(flash_info_t *info, int sect)
+{
+ ulong start, now, last;
+ volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *)(info->start[sect]);
+
+ start = get_timer (0);
+ last = start;
+ while ((addr[0] & (FLASH_WORD_SIZE)0x00800080) != (FLASH_WORD_SIZE)0x00800080) {
+ if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ printf ("Timeout\n");
+ return -1;
+ }
+ /* show that we're waiting */
+ if ((now - last) > 1000) { /* every second */
+ putc ('.');
+ last = now;
+ }
+ }
+ return 0;
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+int flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+ volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *)(info->start[0]);
+ volatile FLASH_WORD_SIZE *addr2;
+ int flag, prot, sect, l_sect;
+ int i;
+
+ if ((s_first < 0) || (s_first > s_last)) {
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("- missing\n");
+ } else {
+ printf ("- no sectors to erase\n");
+ }
+ return 1;
+ }
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("Can't erase unknown flash type - aborted\n");
+ return 1;
+ }
+
+ prot = 0;
+ for (sect=s_first; sect<=s_last; ++sect) {
+ if (info->protect[sect]) {
+ prot++;
+ }
+ }
+
+ if (prot) {
+ printf ("- Warning: %d protected sectors will not be erased!\n",
+ prot);
+ } else {
+ printf ("\n");
+ }
+
+ l_sect = -1;
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ /* Start erase on unprotected sectors */
+ for (sect = s_first; sect<=s_last; sect++) {
+ if (info->protect[sect] == 0) { /* not protected */
+ addr2 = (FLASH_WORD_SIZE *)(info->start[sect]);
+ DEBUGF("Erasing sector %p\n", addr2);
+
+ if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
+ addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
+ addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
+ addr[ADDR0] = (FLASH_WORD_SIZE)0x00800080;
+ addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
+ addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
+ addr2[0] = (FLASH_WORD_SIZE)0x00500050; /* block erase */
+ for (i=0; i<50; i++)
+ udelay(1000); /* wait 1 ms */
+ } else {
+ addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
+ addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
+ addr[ADDR0] = (FLASH_WORD_SIZE)0x00800080;
+ addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
+ addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
+ addr2[0] = (FLASH_WORD_SIZE)0x00300030; /* sector erase */
+ }
+ l_sect = sect;
+ /*
+ * Wait for each sector to complete, it's more
+ * reliable. According to AMD Spec, you must
+ * issue all erase commands within a specified
+ * timeout. This has been seen to fail, especially
+ * if printf()s are included (for debug)!!
+ */
+ wait_for_DQ7(info, sect);
+ }
+ }
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* wait at least 80us - let's wait 1 ms */
+ udelay (1000);
+
+ /* reset to read mode */
+ addr = (FLASH_WORD_SIZE *)info->start[0];
+ addr[0] = (FLASH_WORD_SIZE)0x00F000F0; /* reset bank */
+
+ printf (" done\n");
+ return 0;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+ ulong cp, wp, data;
+ int i, l, rc;
+
+ wp = (addr & ~3); /* get lower word aligned address */
+
+ /*
+ * handle unaligned start bytes
+ */
+ if ((l = addr - wp) != 0) {
+ data = 0;
+ for (i=0, cp=wp; i<l; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+ for (; i<4 && cnt>0; ++i) {
+ data = (data << 8) | *src++;
+ --cnt;
+ ++cp;
+ }
+ for (; cnt==0 && i<4; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+
+ if ((rc = write_word(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 4;
+ }
+
+ /*
+ * handle word aligned part
+ */
+ while (cnt >= 4) {
+ data = 0;
+ for (i=0; i<4; ++i) {
+ data = (data << 8) | *src++;
+ }
+ if ((rc = write_word(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 4;
+ cnt -= 4;
+ }
+
+ if (cnt == 0) {
+ return (0);
+ }
+
+ /*
+ * handle unaligned tail bytes
+ */
+ data = 0;
+ for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
+ data = (data << 8) | *src++;
+ --cnt;
+ }
+ for (; i<4; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+
+ return (write_word(info, wp, data));
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_word (flash_info_t * info, ulong dest, ulong data)
+{
+ volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *) (info->start[0]);
+ volatile FLASH_WORD_SIZE *dest2 = (FLASH_WORD_SIZE *) dest;
+ volatile FLASH_WORD_SIZE *data2 = (FLASH_WORD_SIZE *) & data;
+ ulong start;
+ int i;
+
+ /* Check if Flash is (sufficiently) erased */
+ if ((*((volatile FLASH_WORD_SIZE *) dest) &
+ (FLASH_WORD_SIZE) data) != (FLASH_WORD_SIZE) data) {
+ return (2);
+ }
+
+ for (i = 0; i < 4 / sizeof (FLASH_WORD_SIZE); i++) {
+ int flag;
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts ();
+
+ addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
+ addr2[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
+ addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00A000A0;
+
+ dest2[i] = data2[i];
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts ();
+
+ /* data polling for D7 */
+ start = get_timer (0);
+ while ((dest2[i] & (FLASH_WORD_SIZE) 0x00800080) !=
+ (data2[i] & (FLASH_WORD_SIZE) 0x00800080)) {
+
+ if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+ return (1);
+ }
+ }
+ }
+
+ return (0);
+}
diff --git a/board/sandburst/common/ppc440gx_i2c.c b/board/sandburst/common/ppc440gx_i2c.c
new file mode 100644
index 0000000..c3b267c
--- /dev/null
+++ b/board/sandburst/common/ppc440gx_i2c.c
@@ -0,0 +1,515 @@
+/*
+ * Copyright (C) 2005 Sandburst Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Ported from cpu/ppc4xx/i2c.c by AS HARNOIS by
+ * Travis B. Sawyer
+ * Sandburst Corporation.
+ */
+#include <common.h>
+#include <ppc4xx.h>
+#if defined(CONFIG_440)
+# include <440_i2c.h>
+#else
+# include <405gp_i2c.h>
+#endif
+#include <i2c.h>
+#include <440_i2c.h>
+#include <command.h>
+#include "ppc440gx_i2c.h"
+
+#ifdef CONFIG_I2C_BUS1
+
+
+
+#define IIC_OK 0
+#define IIC_NOK 1
+#define IIC_NOK_LA 2 /* Lost arbitration */
+#define IIC_NOK_ICT 3 /* Incomplete transfer */
+#define IIC_NOK_XFRA 4 /* Transfer aborted */
+#define IIC_NOK_DATA 5 /* No data in buffer */
+#define IIC_NOK_TOUT 6 /* Transfer timeout */
+
+#define IIC_TIMEOUT 1 /* 1 second */
+#if defined(CFG_I2C_NOPROBES)
+static uchar i2c_no_probes[] = CFG_I2C_NOPROBES;
+#endif
+
+static void _i2c_bus1_reset (void)
+{
+ int i, status;
+
+ /* Reset status register */
+ /* write 1 in SCMP and IRQA to clear these fields */
+ out8 (IIC_STS1, 0x0A);
+
+ /* write 1 in IRQP IRQD LA ICT XFRA to clear these fields */
+ out8 (IIC_EXTSTS1, 0x8F);
+ __asm__ volatile ("eieio");
+
+ /*
+ * Get current state, reset bus
+ * only if no transfers are pending.
+ */
+ i = 10;
+ do {
+ /* Get status */
+ status = in8 (IIC_STS1);
+ udelay (500); /* 500us */
+ i--;
+ } while ((status & IIC_STS_PT) && (i > 0));
+ /* Soft reset controller */
+ status = in8 (IIC_XTCNTLSS1);
+ out8 (IIC_XTCNTLSS1, (status | IIC_XTCNTLSS_SRST));
+ __asm__ volatile ("eieio");
+
+ /* make sure where in initial state, data hi, clock hi */
+ out8 (IIC_DIRECTCNTL1, 0xC);
+ for (i = 0; i < 10; i++) {
+ if ((in8 (IIC_DIRECTCNTL1) & 0x3) != 0x3) {
+ /* clock until we get to known state */
+ out8 (IIC_DIRECTCNTL1, 0x8); /* clock lo */
+ udelay (100); /* 100us */
+ out8 (IIC_DIRECTCNTL1, 0xC); /* clock hi */
+ udelay (100); /* 100us */
+ } else {
+ break;
+ }
+ }
+ /* send start condition */
+ out8 (IIC_DIRECTCNTL1, 0x4);
+ udelay (1000); /* 1ms */
+ /* send stop condition */
+ out8 (IIC_DIRECTCNTL1, 0xC);
+ udelay (1000); /* 1ms */
+ /* Unreset controller */
+ out8 (IIC_XTCNTLSS1, (status & ~IIC_XTCNTLSS_SRST));
+ udelay (1000); /* 1ms */
+}
+
+void i2c1_init (int speed, int slaveadd)
+{
+ sys_info_t sysInfo;
+ unsigned long freqOPB;
+ int val, divisor;
+
+#ifdef CFG_I2C_INIT_BOARD
+ /* call board specific i2c bus reset routine before accessing the */
+ /* environment, which might be in a chip on that bus. For details */
+ /* about this problem see doc/I2C_Edge_Conditions. */
+ i2c_init_board();
+#endif
+
+ /* Handle possible failed I2C state */
+ /* FIXME: put this into i2c_init_board()? */
+ _i2c_bus1_reset ();
+
+ /* clear lo master address */
+ out8 (IIC_LMADR1, 0);
+
+ /* clear hi master address */
+ out8 (IIC_HMADR1, 0);
+
+ /* clear lo slave address */
+ out8 (IIC_LSADR1, 0);
+
+ /* clear hi slave address */
+ out8 (IIC_HSADR1, 0);
+
+ /* Clock divide Register */
+ /* get OPB frequency */
+ get_sys_info (&sysInfo);
+ freqOPB = sysInfo.freqPLB / sysInfo.pllOpbDiv;
+ /* set divisor according to freqOPB */
+ divisor = (freqOPB - 1) / 10000000;
+ if (divisor == 0)
+ divisor = 1;
+ out8 (IIC_CLKDIV1, divisor);
+
+ /* no interrupts */
+ out8 (IIC_INTRMSK1, 0);
+
+ /* clear transfer count */
+ out8 (IIC_XFRCNT1, 0);
+
+ /* clear extended control & stat */
+ /* write 1 in SRC SRS SWC SWS to clear these fields */
+ out8 (IIC_XTCNTLSS1, 0xF0);
+
+ /* Mode Control Register
+ Flush Slave/Master data buffer */
+ out8 (IIC_MDCNTL1, IIC_MDCNTL_FSDB | IIC_MDCNTL_FMDB);
+ __asm__ volatile ("eieio");
+
+
+ val = in8(IIC_MDCNTL1);
+ __asm__ volatile ("eieio");
+
+ /* Ignore General Call, slave transfers are ignored,
+ disable interrupts, exit unknown bus state, enable hold
+ SCL
+ 100kHz normaly or FastMode for 400kHz and above
+ */
+
+ val |= IIC_MDCNTL_EUBS|IIC_MDCNTL_HSCL;
+ if( speed >= 400000 ){
+ val |= IIC_MDCNTL_FSM;
+ }
+ out8 (IIC_MDCNTL1, val);
+
+ /* clear control reg */
+ out8 (IIC_CNTL1, 0x00);
+ __asm__ volatile ("eieio");
+
+}
+
+/*
+ This code tries to use the features of the 405GP i2c
+ controller. It will transfer up to 4 bytes in one pass
+ on the loop. It only does out8(lbz) to the buffer when it
+ is possible to do out16(lhz) transfers.
+
+ cmd_type is 0 for write 1 for read.
+
+ addr_len can take any value from 0-255, it is only limited
+ by the char, we could make it larger if needed. If it is
+ 0 we skip the address write cycle.
+
+ Typical case is a Write of an addr followd by a Read. The
+ IBM FAQ does not cover this. On the last byte of the write
+ we don't set the creg CHT bit, and on the first bytes of the
+ read we set the RPST bit.
+
+ It does not support address only transfers, there must be
+ a data part. If you want to write the address yourself, put
+ it in the data pointer.
+
+ It does not support transfer to/from address 0.
+
+ It does not check XFRCNT.
+*/
+static
+int i2c_transfer1(unsigned char cmd_type,
+ unsigned char chip,
+ unsigned char addr[],
+ unsigned char addr_len,
+ unsigned char data[],
+ unsigned short data_len )
+{
+ unsigned char* ptr;
+ int reading;
+ int tran,cnt;
+ int result;
+ int status;
+ int i;
+ uchar creg;
+
+ if( data == 0 || data_len == 0 ){
+ /*Don't support data transfer of no length or to address 0*/
+ printf( "i2c_transfer: bad call\n" );
+ return IIC_NOK;
+ }
+ if( addr && addr_len ){
+ ptr = addr;
+ cnt = addr_len;
+ reading = 0;
+ }else{
+ ptr = data;
+ cnt = data_len;
+ reading = cmd_type;
+ }
+
+ /*Clear Stop Complete Bit*/
+ out8(IIC_STS1,IIC_STS_SCMP);
+ /* Check init */
+ i=10;
+ do {
+ /* Get status */
+ status = in8(IIC_STS1);
+ __asm__ volatile("eieio");
+ i--;
+ } while ((status & IIC_STS_PT) && (i>0));
+
+ if (status & IIC_STS_PT) {
+ result = IIC_NOK_TOUT;
+ return(result);
+ }
+ /*flush the Master/Slave Databuffers*/
+ out8(IIC_MDCNTL1, ((in8(IIC_MDCNTL1))|IIC_MDCNTL_FMDB|IIC_MDCNTL_FSDB));
+ /*need to wait 4 OPB clocks? code below should take that long*/
+
+ /* 7-bit adressing */
+ out8(IIC_HMADR1,0);
+ out8(IIC_LMADR1, chip);
+ __asm__ volatile("eieio");
+
+ tran = 0;
+ result = IIC_OK;
+ creg = 0;
+
+ while ( tran != cnt && (result == IIC_OK)) {
+ int bc,j;
+
+ /* Control register =
+ Normal transfer, 7-bits adressing, Transfer up to bc bytes, Normal start,
+ Transfer is a sequence of transfers
+ */
+ creg |= IIC_CNTL_PT;
+
+ bc = (cnt - tran) > 4 ? 4 :
+ cnt - tran;
+ creg |= (bc-1)<<4;
+ /* if the real cmd type is write continue trans*/
+ if ( (!cmd_type && (ptr == addr)) || ((tran+bc) != cnt) )
+ creg |= IIC_CNTL_CHT;
+
+ if (reading)
+ creg |= IIC_CNTL_READ;
+ else {
+ for(j=0; j<bc; j++) {
+ /* Set buffer */
+ out8(IIC_MDBUF1,ptr[tran+j]);
+ __asm__ volatile("eieio");
+ }
+ }
+ out8(IIC_CNTL1, creg );
+ __asm__ volatile("eieio");
+
+ /* Transfer is in progress
+ we have to wait for upto 5 bytes of data
+ 1 byte chip address+r/w bit then bc bytes
+ of data.
+ udelay(10) is 1 bit time at 100khz
+ Doubled for slop. 20 is too small.
+ */
+ i=2*5*8;
+ do {
+ /* Get status */
+ status = in8(IIC_STS1);
+ __asm__ volatile("eieio");
+ udelay (10);
+ i--;
+ } while ((status & IIC_STS_PT) && !(status & IIC_STS_ERR)
+ && (i>0));
+
+ if (status & IIC_STS_ERR) {
+ result = IIC_NOK;
+ status = in8 (IIC_EXTSTS1);
+ /* Lost arbitration? */
+ if (status & IIC_EXTSTS_LA)
+ result = IIC_NOK_LA;
+ /* Incomplete transfer? */
+ if (status & IIC_EXTSTS_ICT)
+ result = IIC_NOK_ICT;
+ /* Transfer aborted? */
+ if (status & IIC_EXTSTS_XFRA)
+ result = IIC_NOK_XFRA;
+ } else if ( status & IIC_STS_PT) {
+ result = IIC_NOK_TOUT;
+ }
+ /* Command is reading => get buffer */
+ if ((reading) && (result == IIC_OK)) {
+ /* Are there data in buffer */
+ if (status & IIC_STS_MDBS) {
+ /*
+ even if we have data we have to wait 4OPB clocks
+ for it to hit the front of the FIFO, after that
+ we can just read. We should check XFCNT here and
+ if the FIFO is full there is no need to wait.
+ */
+ udelay (1);
+ for(j=0;j<bc;j++) {
+ ptr[tran+j] = in8(IIC_MDBUF1);
+ __asm__ volatile("eieio");
+ }
+ } else
+ result = IIC_NOK_DATA;
+ }
+ creg = 0;
+ tran+=bc;
+ if( ptr == addr && tran == cnt ) {
+ ptr = data;
+ cnt = data_len;
+ tran = 0;
+ reading = cmd_type;
+ if( reading )
+ creg = IIC_CNTL_RPST;
+ }
+ }
+ return (result);
+}
+
+int i2c_probe1 (uchar chip)
+{
+ uchar buf[1];
+
+ buf[0] = 0;
+
+ /*
+ * What is needed is to send the chip address and verify that the
+ * address was <ACK>ed (i.e. there was a chip at that address which
+ * drove the data line low).
+ */
+ return(i2c_transfer1 (1, chip << 1, 0,0, buf, 1) != 0);
+}
+
+
+int i2c_read1 (uchar chip, uint addr, int alen, uchar * buffer, int len)
+{
+ uchar xaddr[4];
+ int ret;
+
+ if ( alen > 4 ) {
+ printf ("I2C read: addr len %d not supported\n", alen);
+ return 1;
+ }
+
+ if ( alen > 0 ) {
+ xaddr[0] = (addr >> 24) & 0xFF;
+ xaddr[1] = (addr >> 16) & 0xFF;
+ xaddr[2] = (addr >> 8) & 0xFF;
+ xaddr[3] = addr & 0xFF;
+ }
+
+
+#ifdef CFG_I2C_EEPROM_ADDR_OVERFLOW
+ /*
+ * EEPROM chips that implement "address overflow" are ones
+ * like Catalyst 24WC04/08/16 which has 9/10/11 bits of
+ * address and the extra bits end up in the "chip address"
+ * bit slots. This makes a 24WC08 (1Kbyte) chip look like
+ * four 256 byte chips.
+ *
+ * Note that we consider the length of the address field to
+ * still be one byte because the extra address bits are
+ * hidden in the chip address.
+ */
+ if( alen > 0 )
+ chip |= ((addr >> (alen * 8)) & CFG_I2C_EEPROM_ADDR_OVERFLOW);
+#endif
+ if( (ret = i2c_transfer1( 1, chip<<1, &xaddr[4-alen], alen, buffer, len )) != 0) {
+ printf( "I2c read: failed %d\n", ret);
+ return 1;
+ }
+ return 0;
+}
+
+int i2c_write1 (uchar chip, uint addr, int alen, uchar * buffer, int len)
+{
+ uchar xaddr[4];
+
+ if ( alen > 4 ) {
+ printf ("I2C write: addr len %d not supported\n", alen);
+ return 1;
+
+ }
+ if ( alen > 0 ) {
+ xaddr[0] = (addr >> 24) & 0xFF;
+ xaddr[1] = (addr >> 16) & 0xFF;
+ xaddr[2] = (addr >> 8) & 0xFF;
+ xaddr[3] = addr & 0xFF;
+ }
+
+#ifdef CFG_I2C_EEPROM_ADDR_OVERFLOW
+ /*
+ * EEPROM chips that implement "address overflow" are ones
+ * like Catalyst 24WC04/08/16 which has 9/10/11 bits of
+ * address and the extra bits end up in the "chip address"
+ * bit slots. This makes a 24WC08 (1Kbyte) chip look like
+ * four 256 byte chips.
+ *
+ * Note that we consider the length of the address field to
+ * still be one byte because the extra address bits are
+ * hidden in the chip address.
+ */
+ if( alen > 0 )
+ chip |= ((addr >> (alen * 8)) & CFG_I2C_EEPROM_ADDR_OVERFLOW);
+#endif
+
+ return (i2c_transfer1( 0, chip<<1, &xaddr[4-alen], alen, buffer, len ) != 0);
+}
+
+/*-----------------------------------------------------------------------
+ * Read a register
+ */
+uchar i2c_reg_read1(uchar i2c_addr, uchar reg)
+{
+ char buf;
+
+ i2c_read1(i2c_addr, reg, 1, &buf, 1);
+
+ return(buf);
+}
+
+/*-----------------------------------------------------------------------
+ * Write a register
+ */
+void i2c_reg_write1(uchar i2c_addr, uchar reg, uchar val)
+{
+ i2c_write1(i2c_addr, reg, 1, &val, 1);
+}
+
+
+int do_i2c1_probe(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ int j;
+#if defined(CFG_I2C_NOPROBES)
+ int k, skip;
+#endif
+
+ puts ("Valid chip addresses:");
+ for(j = 0; j < 128; j++) {
+#if defined(CFG_I2C_NOPROBES)
+ skip = 0;
+ for (k = 0; k < sizeof(i2c_no_probes); k++){
+ if (j == i2c_no_probes[k]){
+ skip = 1;
+ break;
+ }
+ }
+ if (skip)
+ continue;
+#endif
+ if(i2c_probe1(j) == 0) {
+ printf(" %02X", j);
+ }
+ }
+ putc ('\n');
+
+#if defined(CFG_I2C_NOPROBES)
+ puts ("Excluded chip addresses:");
+ for( k = 0; k < sizeof(i2c_no_probes); k++ )
+ printf(" %02X", i2c_no_probes[k] );
+ putc ('\n');
+#endif
+
+ return 0;
+}
+
+U_BOOT_CMD(
+ iprobe1, 1, 1, do_i2c1_probe,
+ "iprobe1 - probe to discover valid I2C chip addresses\n",
+ "\n -discover valid I2C chip addresses\n"
+);
+
+#endif
+
diff --git a/board/sandburst/common/ppc440gx_i2c.h b/board/sandburst/common/ppc440gx_i2c.h
new file mode 100644
index 0000000..e25a3171
--- /dev/null
+++ b/board/sandburst/common/ppc440gx_i2c.h
@@ -0,0 +1,67 @@
+/*
+ * Copyright (C) 2005 Sandburst Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Ported from i2c driver for ppc4xx by AS HARNOIS by
+ * Travis B. Sawyer
+ * Sandburst Corporation
+ */
+#include <common.h>
+#include <ppc4xx.h>
+#if defined(CONFIG_440)
+# include <440_i2c.h>
+#else
+# include <405gp_i2c.h>
+#endif
+#include <i2c.h>
+
+
+#ifdef CONFIG_HARD_I2C
+
+
+
+#define I2C_BUS1_BASE_ADDR (CFG_PERIPHERAL_BASE + 0x00000500)
+#define I2C_REGISTERS_BUS1_BASE_ADDRESS I2C_BUS1_BASE_ADDR
+#define IIC_MDBUF1 (I2C_REGISTERS_BUS1_BASE_ADDRESS+IICMDBUF)
+#define IIC_SDBUF1 (I2C_REGISTERS_BUS1_BASE_ADDRESS+IICSDBUF)
+#define IIC_LMADR1 (I2C_REGISTERS_BUS1_BASE_ADDRESS+IICLMADR)
+#define IIC_HMADR1 (I2C_REGISTERS_BUS1_BASE_ADDRESS+IICHMADR)
+#define IIC_CNTL1 (I2C_REGISTERS_BUS1_BASE_ADDRESS+IICCNTL)
+#define IIC_MDCNTL1 (I2C_REGISTERS_BUS1_BASE_ADDRESS+IICMDCNTL)
+#define IIC_STS1 (I2C_REGISTERS_BUS1_BASE_ADDRESS+IICSTS)
+#define IIC_EXTSTS1 (I2C_REGISTERS_BUS1_BASE_ADDRESS+IICEXTSTS)
+#define IIC_LSADR1 (I2C_REGISTERS_BUS1_BASE_ADDRESS+IICLSADR)
+#define IIC_HSADR1 (I2C_REGISTERS_BUS1_BASE_ADDRESS+IICHSADR)
+#define IIC_CLKDIV1 (I2C_REGISTERS_BUS1_BASE_ADDRESS+IICCLKDIV)
+#define IIC_INTRMSK1 (I2C_REGISTERS_BUS1_BASE_ADDRESS+IICINTRMSK)
+#define IIC_XFRCNT1 (I2C_REGISTERS_BUS1_BASE_ADDRESS+IICXFRCNT)
+#define IIC_XTCNTLSS1 (I2C_REGISTERS_BUS1_BASE_ADDRESS+IICXTCNTLSS)
+#define IIC_DIRECTCNTL1 (I2C_REGISTERS_BUS1_BASE_ADDRESS+IICDIRECTCNTL)
+
+void i2c1_init (int speed, int slaveadd);
+int i2c_probe1 (uchar chip);
+int i2c_read1 (uchar chip, uint addr, int alen, uchar * buffer, int len);
+int i2c_write1 (uchar chip, uint addr, int alen, uchar * buffer, int len);
+uchar i2c_reg_read1(uchar i2c_addr, uchar reg);
+void i2c_reg_write1(uchar i2c_addr, uchar reg, uchar val);
+
+#endif
diff --git a/board/sandburst/common/sb_common.c b/board/sandburst/common/sb_common.c
new file mode 100644
index 0000000..1251bc9
--- /dev/null
+++ b/board/sandburst/common/sb_common.c
@@ -0,0 +1,451 @@
+/*
+ * Copyright (C) 2005 Sandburst Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <config.h>
+#include <common.h>
+#include <command.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <spd_sdram.h>
+#include <i2c.h>
+#include "ppc440gx_i2c.h"
+#include "sb_common.h"
+
+long int fixed_sdram (void);
+
+/*************************************************************************
+ * metrobox_get_master
+ *
+ * PRI_N - active low signal. If the GPIO pin is low we are the master
+ *
+ ************************************************************************/
+int sbcommon_get_master(void)
+{
+ ppc440_gpio_regs_t *gpio_regs;
+
+ gpio_regs = (ppc440_gpio_regs_t *)CFG_GPIO_BASE;
+
+ if (gpio_regs->in & SBCOMMON_GPIO_PRI_N) {
+ return 0;
+ }
+ else {
+ return 1;
+ }
+}
+
+/*************************************************************************
+ * metrobox_secondary_present
+ *
+ * Figure out if secondary/slave board is present
+ *
+ ************************************************************************/
+int sbcommon_secondary_present(void)
+{
+ ppc440_gpio_regs_t *gpio_regs;
+
+ gpio_regs = (ppc440_gpio_regs_t *)CFG_GPIO_BASE;
+
+ if (gpio_regs->in & SBCOMMON_GPIO_SEC_PRES)
+ return 0;
+ else
+ return 1;
+}
+
+/*************************************************************************
+ * sbcommon_get_serial_number
+ *
+ * Retrieve the board serial number via the mac address in eeprom
+ *
+ ************************************************************************/
+unsigned short sbcommon_get_serial_number(void)
+{
+ unsigned char buff[0x100];
+ unsigned short sernum;
+
+ /* Get the board serial number from eeprom */
+ /* Initialize I2C */
+ i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+
+ /* Read 256 bytes in EEPROM */
+ i2c_read (0x50, 0, 1, buff, 0x100);
+
+ memcpy(&sernum, &buff[0xF4], 2);
+ sernum /= 32;
+
+ return (sernum);
+}
+
+/*************************************************************************
+ * sbcommon_fans
+ *
+ * Spin up fans 2 & 3 to get some air moving. OS will take care
+ * of the rest. This is mostly a precaution...
+ *
+ * Assumes i2c bus 1 is ready.
+ *
+ ************************************************************************/
+void sbcommon_fans(void)
+{
+ /*
+ * Attempt to turn on 2 of the fans...
+ * Need to go through the bridge
+ */
+ puts ("FANS: ");
+
+ /* select fan4 through the bridge */
+ i2c_reg_write1(0x73, /* addr */
+ 0x00, /* reg */
+ 0x08); /* val = bus 4 */
+
+ /* Turn on FAN 4 */
+ i2c_reg_write1(0x2e,
+ 1,
+ 0x80);
+
+ i2c_reg_write1(0x2e,
+ 0,
+ 0x19);
+
+ /* Deselect bus 4 on the bridge */
+ i2c_reg_write1(0x73,
+ 0x00,
+ 0x00);
+
+ /* select fan3 through the bridge */
+ i2c_reg_write1(0x73, /* addr */
+ 0x00, /* reg */
+ 0x04); /* val = bus 3 */
+
+ /* Turn on FAN 3 */
+ i2c_reg_write1(0x2e,
+ 1,
+ 0x80);
+
+ i2c_reg_write1(0x2e,
+ 0,
+ 0x19);
+
+ /* Deselect bus 3 on the bridge */
+ i2c_reg_write1(0x73,
+ 0x00,
+ 0x00);
+
+ /* select fan2 through the bridge */
+ i2c_reg_write1(0x73, /* addr */
+ 0x00, /* reg */
+ 0x02); /* val = bus 4 */
+
+ /* Turn on FAN 2 */
+ i2c_reg_write1(0x2e,
+ 1,
+ 0x80);
+
+ i2c_reg_write1(0x2e,
+ 0,
+ 0x19);
+
+ /* Deselect bus 2 on the bridge */
+ i2c_reg_write1(0x73,
+ 0x00,
+ 0x00);
+
+ /* select fan1 through the bridge */
+ i2c_reg_write1(0x73, /* addr */
+ 0x00, /* reg */
+ 0x01); /* val = bus 0 */
+
+ /* Turn on FAN 1 */
+ i2c_reg_write1(0x2e,
+ 1,
+ 0x80);
+
+ i2c_reg_write1(0x2e,
+ 0,
+ 0x19);
+
+ /* Deselect bus 1 on the bridge */
+ i2c_reg_write1(0x73,
+ 0x00,
+ 0x00);
+
+ puts ("on\n");
+
+ return;
+
+}
+
+/*************************************************************************
+ * initdram
+ *
+ * Initialize sdram
+ *
+ ************************************************************************/
+long int initdram (int board_type)
+{
+ long dram_size = 0;
+
+#if defined(CONFIG_SPD_EEPROM)
+ dram_size = spd_sdram (0);
+#else
+ dram_size = fixed_sdram ();
+#endif
+ return dram_size;
+}
+
+
+/*************************************************************************
+ * testdram
+ *
+ *
+ ************************************************************************/
+#if defined(CFG_DRAM_TEST)
+int testdram (void)
+{
+ uint *pstart = (uint *) CFG_MEMTEST_START;
+ uint *pend = (uint *) CFG_MEMTEST_END;
+ uint *p;
+
+ printf("Testing SDRAM: ");
+ for (p = pstart; p < pend; p++)
+ *p = 0xaaaaaaaa;
+
+ for (p = pstart; p < pend; p++) {
+ if (*p != 0xaaaaaaaa) {
+ printf ("SDRAM test fails at: %08x\n", (uint) p);
+ return 1;
+ }
+ }
+
+ for (p = pstart; p < pend; p++)
+ *p = 0x55555555;
+
+ for (p = pstart; p < pend; p++) {
+ if (*p != 0x55555555) {
+ printf ("SDRAM test fails at: %08x\n", (uint) p);
+ return 1;
+ }
+ }
+
+ printf("OK\n");
+ return 0;
+}
+#endif
+
+#if !defined(CONFIG_SPD_EEPROM)
+/*************************************************************************
+ * fixed sdram init -- doesn't use serial presence detect.
+ *
+ * Assumes: 128 MB, non-ECC, non-registered
+ * PLB @ 133 MHz
+ *
+ ************************************************************************/
+long int fixed_sdram (void)
+{
+ uint reg;
+
+ /*--------------------------------------------------------------------
+ * Setup some default
+ *------------------------------------------------------------------*/
+ mtsdram (mem_uabba, 0x00000000); /* ubba=0 (default) */
+ mtsdram (mem_slio, 0x00000000); /* rdre=0 wrre=0 rarw=0 */
+ mtsdram (mem_devopt, 0x00000000); /* dll=0 ds=0 (normal) */
+ mtsdram (mem_wddctr, 0x00000000); /* wrcp=0 dcd=0 */
+ mtsdram (mem_clktr, 0x40000000); /* clkp=1 (90 deg wr) dcdt=0 */
+
+ /*--------------------------------------------------------------------
+ * Setup for board-specific specific mem
+ *------------------------------------------------------------------*/
+ /*
+ * Following for CAS Latency = 2.5 @ 133 MHz PLB
+ */
+ mtsdram (mem_b0cr, 0x000a4001); /* SDBA=0x000 128MB, Mode 3, enabled */
+ mtsdram (mem_tr0, 0x410a4012); /* WR=2 WD=1 CL=2.5 PA=3 CP=4 LD=2 */
+ /* RA=10 RD=3 */
+ mtsdram (mem_tr1, 0x8080082f); /* SS=T2 SL=STAGE 3 CD=1 CT=0x02f */
+ mtsdram (mem_rtr, 0x08200000); /* Rate 15.625 ns @ 133 MHz PLB */
+ mtsdram (mem_cfg1, 0x00000000); /* Self-refresh exit, disable PM */
+ udelay (400); /* Delay 200 usecs (min) */
+
+ /*--------------------------------------------------------------------
+ * Enable the controller, then wait for DCEN to complete
+ *------------------------------------------------------------------*/
+ mtsdram (mem_cfg0, 0x86000000); /* DCEN=1, PMUD=1, 64-bit */
+ for (;;) {
+ mfsdram (mem_mcsts, reg);
+ if (reg & 0x80000000)
+ break;
+ }
+
+ return (128 * 1024 * 1024); /* 128 MB */
+}
+#endif /* !defined(CONFIG_SPD_EEPROM) */
+
+
+/*************************************************************************
+ * pci_pre_init
+ *
+ * This routine is called just prior to registering the hose and gives
+ * the board the opportunity to check things. Returning a value of zero
+ * indicates that things are bad & PCI initialization should be aborted.
+ *
+ * Different boards may wish to customize the pci controller structure
+ * (add regions, override default access routines, etc) or perform
+ * certain pre-initialization actions.
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT)
+int pci_pre_init(struct pci_controller * hose )
+{
+ unsigned long strap;
+
+ /*--------------------------------------------------------------------------+
+ * The metrobox is always configured as the host & requires the
+ * PCI arbiter to be enabled.
+ *--------------------------------------------------------------------------*/
+ mfsdr(sdr_sdstp1, strap);
+ if( (strap & SDR0_SDSTP1_PAE_MASK) == 0 ){
+ printf("PCI: SDR0_STRP1[%08lX] - PCI Arbiter disabled.\n",strap);
+ return 0;
+ }
+
+ return 1;
+}
+#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */
+
+/*************************************************************************
+ * pci_target_init
+ *
+ * The bootstrap configuration provides default settings for the pci
+ * inbound map (PIM). But the bootstrap config choices are limited and
+ * may not be sufficient for a given board.
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
+void pci_target_init(struct pci_controller * hose )
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ /*--------------------------------------------------------------------------+
+ * Disable everything
+ *--------------------------------------------------------------------------*/
+ out32r( PCIX0_PIM0SA, 0 ); /* disable */
+ out32r( PCIX0_PIM1SA, 0 ); /* disable */
+ out32r( PCIX0_PIM2SA, 0 ); /* disable */
+ out32r( PCIX0_EROMBA, 0 ); /* disable expansion rom */
+
+ /*--------------------------------------------------------------------------+
+ * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping
+ * options to not support sizes such as 128/256 MB.
+ *--------------------------------------------------------------------------*/
+ out32r( PCIX0_PIM0LAL, CFG_SDRAM_BASE );
+ out32r( PCIX0_PIM0LAH, 0 );
+ out32r( PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1 );
+
+ out32r( PCIX0_BAR0, 0 );
+
+ /*--------------------------------------------------------------------------+
+ * Program the board's subsystem id/vendor id
+ *--------------------------------------------------------------------------*/
+ out16r( PCIX0_SBSYSVID, CFG_PCI_SUBSYS_VENDORID );
+ out16r( PCIX0_SBSYSID, CFG_PCI_SUBSYS_DEVICEID );
+
+ out16r( PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY );
+}
+#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
+
+
+/*************************************************************************
+ * is_pci_host
+ *
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI)
+int is_pci_host(struct pci_controller *hose)
+{
+ /* The metrobox is always configured as host. */
+ return(1);
+}
+#endif /* defined(CONFIG_PCI) */
+
+/*************************************************************************
+ * board_get_enetaddr
+ *
+ * Get the ethernet MAC address for the management ethernet from the
+ * strap EEPROM. Note that is the BASE address for the range of
+ * external ethernet MACs on the board. The base + 31 is the actual
+ * mgmt mac address.
+ *
+ ************************************************************************/
+static int macaddr_idx = 0;
+
+void board_get_enetaddr (uchar * enet)
+{
+ int i;
+ unsigned short tmp;
+ unsigned char buff[0x100], *cp;
+
+ if (0 == macaddr_idx) {
+
+ /* Initialize I2C */
+ i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+
+ /* Read 256 bytes in EEPROM */
+ i2c_read (0x50, 0, 1, buff, 0x100);
+
+ cp = &buff[0xF0];
+
+ for (i = 0; i < 6; i++,cp++)
+ enet[i] = *cp;
+
+ memcpy(&tmp, &enet[4], 2);
+ tmp += 31;
+ memcpy(&enet[4], &tmp, 2);
+
+ macaddr_idx++;
+ } else {
+ enet[0] = 0x02;
+ enet[1] = 0x00;
+ enet[2] = 0x00;
+ enet[3] = 0x00;
+ enet[4] = 0x00;
+ if (1 == sbcommon_get_master() ) {
+ /* Master/Primary card */
+ enet[5] = 0x01;
+ } else {
+ /* Slave/Secondary card */
+ enet [5] = 0x02;
+ }
+ }
+
+ return;
+}
+
+#ifdef CONFIG_POST
+/*
+ * Returns 1 if keys pressed to start the power-on long-running tests
+ * Called from board_init_f().
+ */
+int post_hotkeys_pressed(void)
+{
+
+ return (ctrlc());
+}
+#endif
diff --git a/board/sandburst/common/sb_common.h b/board/sandburst/common/sb_common.h
new file mode 100644
index 0000000..8994e42
--- /dev/null
+++ b/board/sandburst/common/sb_common.h
@@ -0,0 +1,83 @@
+#ifndef __SBCOMMON_H__
+#define __SBCOMMON_H__
+/*
+ * Copyright (C) 2005 Sandburst Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <config.h>
+#include <common.h>
+#include <command.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <spd_sdram.h>
+#include <i2c.h>
+#include "ppc440gx_i2c.h"
+
+
+
+
+/*
+ * GPIO Settings
+ */
+/* Chassis settings */
+#define SBCOMMON_GPIO_PRI_N 0x00001000 /* 0 = Chassis Master, 1 = Slave */
+#define SBCOMMON_GPIO_SEC_PRES 0x00000800 /* 1 = Other board present */
+
+/* Debug LEDs */
+#define SBCOMMON_GPIO_DBGLED_0 0x00000400
+#define SBCOMMON_GPIO_DBGLED_1 0x00000200
+#define SBCOMMON_GPIO_DBGLED_2 0x00100000
+#define SBCOMMON_GPIO_DBGLED_3 0x00000100
+
+#define SBCOMMON_GPIO_DBGLEDS (SBCOMMON_GPIO_DBGLED_0 | \
+ SBCOMMON_GPIO_DBGLED_1 | \
+ SBCOMMON_GPIO_DBGLED_2 | \
+ SBCOMMON_GPIO_DBGLED_3)
+
+#define SBCOMMON_GPIO_SYS_FAULT 0x00000080
+#define SBCOMMON_GPIO_SYS_OTEMP 0x00000040
+#define SBCOMMON_GPIO_SYS_STATUS 0x00000020
+
+#define SBCOMMON_GPIO_SYS_LEDS (SBCOMMON_GPIO_SYS_STATUS)
+
+#define SBCOMMON_GPIO_LEDS (SBCOMMON_GPIO_DBGLED_0 | \
+ SBCOMMON_GPIO_DBGLED_1 | \
+ SBCOMMON_GPIO_DBGLED_2 | \
+ SBCOMMON_GPIO_DBGLED_3 | \
+ SBCOMMON_GPIO_SYS_STATUS)
+
+typedef struct ppc440_gpio_regs {
+ volatile unsigned long out;
+ volatile unsigned long tri_state;
+ volatile unsigned long dummy[4];
+ volatile unsigned long open_drain;
+ volatile unsigned long in;
+} __attribute__((packed)) ppc440_gpio_regs_t;
+
+
+
+
+int sbcommon_get_master(void);
+int sbcommon_secondary_present(void);
+unsigned short sbcommon_get_serial_number(void);
+void sbcommon_fans(void);
+
+
+#endif /* __SBCOMMON_H__ */
diff --git a/board/sandburst/karef/Makefile b/board/sandburst/karef/Makefile
new file mode 100644
index 0000000..8b3173c
--- /dev/null
+++ b/board/sandburst/karef/Makefile
@@ -0,0 +1,59 @@
+#
+# (C) Copyright 2005
+# Sandburst Corporation
+# Travis B. Sawyer
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+# TBS: add for debugging purposes
+BUILDUSER := $(shell whoami)
+FORCEBUILD := $(shell rm -f $(LIB) $(BOARD).o)
+
+CFLAGS += -DBUILDUSER='"$(BUILDUSER)"'
+# TBS: end debugging
+
+
+LIB = lib$(BOARD).a
+
+OBJS = $(BOARD).o ../common/flash.o ../common/ppc440gx_i2c.o \
+ ../common/sb_common.o
+
+SOBJS = init.o
+
+
+$(LIB): $(OBJS) $(SOBJS)
+ $(AR) crv $@ $(OBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend *~
+
+#########################################################################
+
+.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+ $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
diff --git a/board/sandburst/karef/config.mk b/board/sandburst/karef/config.mk
new file mode 100644
index 0000000..65c1e48
--- /dev/null
+++ b/board/sandburst/karef/config.mk
@@ -0,0 +1,43 @@
+#
+# (C) Copyright 2005
+# Sandburst Corporation
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# Sandburst Corporation Metrobox Reference Design
+# Travis B. Sawyer
+#
+
+ifeq ($(ramsym),1)
+TEXT_BASE = 0x07FD0000
+else
+TEXT_BASE = 0xFFF80000
+endif
+
+PLATFORM_CPPFLAGS += -DCONFIG_440=1
+
+ifeq ($(debug),1)
+PLATFORM_CPPFLAGS += -DDEBUG
+endif
+
+ifeq ($(dbcr),1)
+PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
+endif
diff --git a/board/sandburst/karef/hal_ka_of_auto.h b/board/sandburst/karef/hal_ka_of_auto.h
new file mode 100644
index 0000000..cc501c9
--- /dev/null
+++ b/board/sandburst/karef/hal_ka_of_auto.h
@@ -0,0 +1,324 @@
+/* ****************************************************************
+ * Common defs for reg spec for chip ka_of
+ * Auto-generated by trex2: DO NOT HAND-EDIT!!
+ * ****************************************************************
+ */
+
+#ifndef HAL_KA_OF_AUTO_H
+#define HAL_KA_OF_AUTO_H
+
+
+/* ----------------------------------------------------------------
+ * For block: 'ofem'
+ */
+
+/* ---- Block instance addressing (for block-select) */
+#define OFEM_BLOCK_ADDR_BIT_L 6
+#define OFEM_BLOCK_ADDR_BIT_H 9
+#define OFEM_BLOCK_ADDR_WIDTH 4
+
+#define OFEM_ADDR 0x0
+
+/* ---- Reg addressing (within block) */
+#define OFEM_REG_ADDR_BIT_L 2
+#define OFEM_REG_ADDR_BIT_H 5
+#define OFEM_REG_ADDR_WIDTH 4
+
+
+/* ================================================================
+ * ---- Register KA_OF_OFEM_REVISION */
+#define SAND_HAL_KA_OF_OFEM_REVISION_OFFSET 0x000
+#ifndef SAND_HAL_KA_OF_OFEM_REVISION_NO_TEST_MASK
+#define SAND_HAL_KA_OF_OFEM_REVISION_NO_TEST_MASK 0x000
+#endif
+#define SAND_HAL_KA_OF_OFEM_REVISION_MASK 0xffffffff
+#define SAND_HAL_KA_OF_OFEM_REVISION_MSB 31
+#define SAND_HAL_KA_OF_OFEM_REVISION_LSB 0
+
+/* ================================================================
+ * ---- Register KA_OF_OFEM_RESET */
+#define SAND_HAL_KA_OF_OFEM_RESET_OFFSET 0x004
+#ifndef SAND_HAL_KA_OF_OFEM_RESET_NO_TEST_MASK
+#define SAND_HAL_KA_OF_OFEM_RESET_NO_TEST_MASK 0x000
+#endif
+#define SAND_HAL_KA_OF_OFEM_RESET_MASK 0xffffffff
+#define SAND_HAL_KA_OF_OFEM_RESET_MSB 31
+#define SAND_HAL_KA_OF_OFEM_RESET_LSB 0
+
+/* ================================================================
+ * ---- Register KA_OF_OFEM_CNTL */
+#define SAND_HAL_KA_OF_OFEM_CNTL_OFFSET 0x018
+#ifndef SAND_HAL_KA_OF_OFEM_CNTL_NO_TEST_MASK
+#define SAND_HAL_KA_OF_OFEM_CNTL_NO_TEST_MASK 0x000
+#endif
+#define SAND_HAL_KA_OF_OFEM_CNTL_MASK 0xffffffff
+#define SAND_HAL_KA_OF_OFEM_CNTL_MSB 31
+#define SAND_HAL_KA_OF_OFEM_CNTL_LSB 0
+
+/* ================================================================
+ * ---- Register KA_OF_OFEM_MAC_FLOW_CTL */
+#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_OFFSET 0x01c
+#ifndef SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_NO_TEST_MASK
+#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_NO_TEST_MASK 0x000
+#endif
+#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_MASK 0xffffffff
+#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_MSB 31
+#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_LSB 0
+
+/* ================================================================
+ * ---- Register KA_OF_OFEM_INTERRUPT */
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_OFFSET 0x008
+#ifndef SAND_HAL_KA_OF_OFEM_INTERRUPT_NO_TEST_MASK
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_NO_TEST_MASK 0x000
+#endif
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK 0xffffffff
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MSB 31
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_LSB 0
+
+/* ================================================================
+ * ---- Register KA_OF_OFEM_INTERRUPT_MASK */
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_OFFSET 0x00c
+#ifndef SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_NO_TEST_MASK
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_NO_TEST_MASK 0x000
+#endif
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MASK 0xffffffff
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MSB 31
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_LSB 0
+
+/* ================================================================
+ * ---- Register KA_OF_OFEM_SCRATCH */
+#define SAND_HAL_KA_OF_OFEM_SCRATCH_OFFSET 0x010
+#ifndef SAND_HAL_KA_OF_OFEM_SCRATCH_NO_TEST_MASK
+#define SAND_HAL_KA_OF_OFEM_SCRATCH_NO_TEST_MASK 0x000
+#endif
+#define SAND_HAL_KA_OF_OFEM_SCRATCH_MASK 0xffffffff
+#define SAND_HAL_KA_OF_OFEM_SCRATCH_MSB 31
+#define SAND_HAL_KA_OF_OFEM_SCRATCH_LSB 0
+
+/* ================================================================
+ * ---- Register KA_OF_OFEM_SCRATCH_MASK */
+#define SAND_HAL_KA_OF_OFEM_SCRATCH_MASK_OFFSET 0x014
+#ifndef SAND_HAL_KA_OF_OFEM_SCRATCH_MASK_NO_TEST_MASK
+#define SAND_HAL_KA_OF_OFEM_SCRATCH_MASK_NO_TEST_MASK 0x000
+#endif
+#define SAND_HAL_KA_OF_OFEM_SCRATCH_MASK_MASK 0xffffffff
+#define SAND_HAL_KA_OF_OFEM_SCRATCH_MASK_MSB 31
+#define SAND_HAL_KA_OF_OFEM_SCRATCH_MASK_LSB 0
+
+/* ================================================================
+ * Field info for register KA_OF_OFEM_REVISION */
+#define SAND_HAL_KA_OF_OFEM_REVISION_IDENTIFICATION_MASK 0x0000ff00
+#define SAND_HAL_KA_OF_OFEM_REVISION_IDENTIFICATION_SHIFT 8
+#define SAND_HAL_KA_OF_OFEM_REVISION_IDENTIFICATION_MSB 15
+#define SAND_HAL_KA_OF_OFEM_REVISION_IDENTIFICATION_LSB 8
+#define SAND_HAL_KA_OF_OFEM_REVISION_IDENTIFICATION_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_KA_OF_OFEM_REVISION_IDENTIFICATION_DEFAULT 0x00000024
+#define SAND_HAL_KA_OF_OFEM_REVISION_REVISION_MASK 0x000000ff
+#define SAND_HAL_KA_OF_OFEM_REVISION_REVISION_SHIFT 0
+#define SAND_HAL_KA_OF_OFEM_REVISION_REVISION_MSB 7
+#define SAND_HAL_KA_OF_OFEM_REVISION_REVISION_LSB 0
+#define SAND_HAL_KA_OF_OFEM_REVISION_REVISION_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_KA_OF_OFEM_REVISION_REVISION_DEFAULT 0x00000000
+
+/* ================================================================
+ * Field info for register KA_OF_OFEM_RESET */
+#define SAND_HAL_KA_OF_OFEM_RESET_I2C_MUX0_RESET_N_MASK 0x00000004
+#define SAND_HAL_KA_OF_OFEM_RESET_I2C_MUX0_RESET_N_SHIFT 2
+#define SAND_HAL_KA_OF_OFEM_RESET_I2C_MUX0_RESET_N_MSB 2
+#define SAND_HAL_KA_OF_OFEM_RESET_I2C_MUX0_RESET_N_LSB 2
+#define SAND_HAL_KA_OF_OFEM_RESET_I2C_MUX0_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_OF_OFEM_RESET_I2C_MUX0_RESET_N_DEFAULT 0x00000000
+#define SAND_HAL_KA_OF_OFEM_RESET_LOCH0_RESET_N_MASK 0x00000002
+#define SAND_HAL_KA_OF_OFEM_RESET_LOCH0_RESET_N_SHIFT 1
+#define SAND_HAL_KA_OF_OFEM_RESET_LOCH0_RESET_N_MSB 1
+#define SAND_HAL_KA_OF_OFEM_RESET_LOCH0_RESET_N_LSB 1
+#define SAND_HAL_KA_OF_OFEM_RESET_LOCH0_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_OF_OFEM_RESET_LOCH0_RESET_N_DEFAULT 0x00000000
+#define SAND_HAL_KA_OF_OFEM_RESET_MAC0_RESET_N_MASK 0x00000001
+#define SAND_HAL_KA_OF_OFEM_RESET_MAC0_RESET_N_SHIFT 0
+#define SAND_HAL_KA_OF_OFEM_RESET_MAC0_RESET_N_MSB 0
+#define SAND_HAL_KA_OF_OFEM_RESET_MAC0_RESET_N_LSB 0
+#define SAND_HAL_KA_OF_OFEM_RESET_MAC0_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_OF_OFEM_RESET_MAC0_RESET_N_DEFAULT 0x00000000
+
+/* ================================================================
+ * Field info for register KA_OF_OFEM_CNTL */
+#define SAND_HAL_KA_OF_OFEM_CNTL_TEMP_LED_MASK 0x000000c0
+#define SAND_HAL_KA_OF_OFEM_CNTL_TEMP_LED_SHIFT 6
+#define SAND_HAL_KA_OF_OFEM_CNTL_TEMP_LED_MSB 7
+#define SAND_HAL_KA_OF_OFEM_CNTL_TEMP_LED_LSB 6
+#define SAND_HAL_KA_OF_OFEM_CNTL_TEMP_LED_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_OF_OFEM_CNTL_TEMP_LED_DEFAULT 0x00000000
+#define SAND_HAL_KA_OF_OFEM_CNTL_FAULT_LED_MASK 0x00000030
+#define SAND_HAL_KA_OF_OFEM_CNTL_FAULT_LED_SHIFT 4
+#define SAND_HAL_KA_OF_OFEM_CNTL_FAULT_LED_MSB 5
+#define SAND_HAL_KA_OF_OFEM_CNTL_FAULT_LED_LSB 4
+#define SAND_HAL_KA_OF_OFEM_CNTL_FAULT_LED_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_OF_OFEM_CNTL_FAULT_LED_DEFAULT 0x00000000
+#define SAND_HAL_KA_OF_OFEM_CNTL_RS232_R_LED_MASK 0x0000000c
+#define SAND_HAL_KA_OF_OFEM_CNTL_RS232_R_LED_SHIFT 2
+#define SAND_HAL_KA_OF_OFEM_CNTL_RS232_R_LED_MSB 3
+#define SAND_HAL_KA_OF_OFEM_CNTL_RS232_R_LED_LSB 2
+#define SAND_HAL_KA_OF_OFEM_CNTL_RS232_R_LED_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_OF_OFEM_CNTL_RS232_R_LED_DEFAULT 0x00000000
+#define SAND_HAL_KA_OF_OFEM_CNTL_RS232_L_LED_MASK 0x00000003
+#define SAND_HAL_KA_OF_OFEM_CNTL_RS232_L_LED_SHIFT 0
+#define SAND_HAL_KA_OF_OFEM_CNTL_RS232_L_LED_MSB 1
+#define SAND_HAL_KA_OF_OFEM_CNTL_RS232_L_LED_LSB 0
+#define SAND_HAL_KA_OF_OFEM_CNTL_RS232_L_LED_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_OF_OFEM_CNTL_RS232_L_LED_DEFAULT 0x00000000
+
+/* ================================================================
+ * Field info for register KA_OF_OFEM_MAC_FLOW_CTL */
+#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_LOCH_APS_SEL_MASK 0x00000100
+#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_LOCH_APS_SEL_SHIFT 8
+#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_LOCH_APS_SEL_MSB 8
+#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_LOCH_APS_SEL_LSB 8
+#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_LOCH_APS_SEL_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_LOCH_APS_SEL_DEFAULT 0x00000000
+#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_MACA_TXPAUSE_FR_MASK 0x00000010
+#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_MACA_TXPAUSE_FR_SHIFT 4
+#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_MACA_TXPAUSE_FR_MSB 4
+#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_MACA_TXPAUSE_FR_LSB 4
+#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_MACA_TXPAUSE_FR_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_MACA_TXPAUSE_FR_DEFAULT 0x00000000
+#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_MACA_TXPAUSE_ADDR_MASK 0x0000000f
+#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_MACA_TXPAUSE_ADDR_SHIFT 0
+#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_MACA_TXPAUSE_ADDR_MSB 3
+#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_MACA_TXPAUSE_ADDR_LSB 0
+#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_MACA_TXPAUSE_ADDR_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_MACA_TXPAUSE_ADDR_DEFAULT 0x00000000
+
+/* ================================================================
+ * Field info for register KA_OF_OFEM_INTERRUPT */
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC_TIMEOUT_MASK 0x00000100
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC_TIMEOUT_SHIFT 8
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC_TIMEOUT_MSB 8
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC_TIMEOUT_LSB 8
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC_TIMEOUT_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC_TIMEOUT_DEFAULT 0x00000000
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_QK_A_LOSOUT_N_MASK 0x00000080
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_QK_A_LOSOUT_N_SHIFT 7
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_QK_A_LOSOUT_N_MSB 7
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_QK_A_LOSOUT_N_LSB 7
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_QK_A_LOSOUT_N_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_QK_A_LOSOUT_N_DEFAULT 0x00000000
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_QK_B_LOSOUT_N_MASK 0x00000040
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_QK_B_LOSOUT_N_SHIFT 6
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_QK_B_LOSOUT_N_MSB 6
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_QK_B_LOSOUT_N_LSB 6
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_QK_B_LOSOUT_N_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_QK_B_LOSOUT_N_DEFAULT 0x00000000
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_A_NR_MASK 0x00000020
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_A_NR_SHIFT 5
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_A_NR_MSB 5
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_A_NR_LSB 5
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_A_NR_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_A_NR_DEFAULT 0x00000000
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_B_NR_MASK 0x00000010
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_B_NR_SHIFT 4
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_B_NR_MSB 4
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_B_NR_LSB 4
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_B_NR_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_B_NR_DEFAULT 0x00000000
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_A_INT_N_MASK 0x00000008
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_A_INT_N_SHIFT 3
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_A_INT_N_MSB 3
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_A_INT_N_LSB 3
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_A_INT_N_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_A_INT_N_DEFAULT 0x00000000
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_B_INT_N_MASK 0x00000004
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_B_INT_N_SHIFT 2
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_B_INT_N_MSB 2
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_B_INT_N_LSB 2
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_B_INT_N_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_B_INT_N_DEFAULT 0x00000000
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC1_INT_N_MASK 0x00000002
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC1_INT_N_SHIFT 1
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC1_INT_N_MSB 1
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC1_INT_N_LSB 1
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC1_INT_N_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC1_INT_N_DEFAULT 0x00000000
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC0_INT_N_MASK 0x00000001
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC0_INT_N_SHIFT 0
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC0_INT_N_MSB 0
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC0_INT_N_LSB 0
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC0_INT_N_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC0_INT_N_DEFAULT 0x00000000
+
+/* ================================================================
+ * Field info for register KA_OF_OFEM_INTERRUPT_MASK */
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC_TIMEOUT_DISINT_MASK 0x00000100
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC_TIMEOUT_DISINT_SHIFT 8
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC_TIMEOUT_DISINT_MSB 8
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC_TIMEOUT_DISINT_LSB 8
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC_TIMEOUT_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC_TIMEOUT_DISINT_DEFAULT 0x00000001
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_QK_A_LOSOUT_N_DISINT_MASK 0x00000080
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_QK_A_LOSOUT_N_DISINT_SHIFT 7
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_QK_A_LOSOUT_N_DISINT_MSB 7
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_QK_A_LOSOUT_N_DISINT_LSB 7
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_QK_A_LOSOUT_N_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_QK_A_LOSOUT_N_DISINT_DEFAULT 0x00000001
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_QK_B_LOSOUT_N_DISINT_MASK 0x00000040
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_QK_B_LOSOUT_N_DISINT_SHIFT 6
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_QK_B_LOSOUT_N_DISINT_MSB 6
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_QK_B_LOSOUT_N_DISINT_LSB 6
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_QK_B_LOSOUT_N_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_QK_B_LOSOUT_N_DISINT_DEFAULT 0x00000001
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_A_NR_DISINT_MASK 0x00000020
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_A_NR_DISINT_SHIFT 5
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_A_NR_DISINT_MSB 5
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_A_NR_DISINT_LSB 5
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_A_NR_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_A_NR_DISINT_DEFAULT 0x00000001
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_B_NR_DISINT_MASK 0x00000010
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_B_NR_DISINT_SHIFT 4
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_B_NR_DISINT_MSB 4
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_B_NR_DISINT_LSB 4
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_B_NR_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_B_NR_DISINT_DEFAULT 0x00000001
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_A_INT_N_DISINT_MASK 0x00000008
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_A_INT_N_DISINT_SHIFT 3
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_A_INT_N_DISINT_MSB 3
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_A_INT_N_DISINT_LSB 3
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_A_INT_N_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_A_INT_N_DISINT_DEFAULT 0x00000001
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_B_INT_N_DISINT_MASK 0x00000004
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_B_INT_N_DISINT_SHIFT 2
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_B_INT_N_DISINT_MSB 2
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_B_INT_N_DISINT_LSB 2
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_B_INT_N_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_B_INT_N_DISINT_DEFAULT 0x00000001
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC1_INT_N_DISINT_MASK 0x00000002
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC1_INT_N_DISINT_SHIFT 1
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC1_INT_N_DISINT_MSB 1
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC1_INT_N_DISINT_LSB 1
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC1_INT_N_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC1_INT_N_DISINT_DEFAULT 0x00000001
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC0_INT_N_DISINT_MASK 0x00000001
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC0_INT_N_DISINT_SHIFT 0
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC0_INT_N_DISINT_MSB 0
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC0_INT_N_DISINT_LSB 0
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC0_INT_N_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC0_INT_N_DISINT_DEFAULT 0x00000001
+
+/* ================================================================
+ * Field info for register KA_OF_OFEM_SCRATCH */
+#define SAND_HAL_KA_OF_OFEM_SCRATCH_TEST_BITS_MASK 0xffffffff
+#define SAND_HAL_KA_OF_OFEM_SCRATCH_TEST_BITS_SHIFT 0
+#define SAND_HAL_KA_OF_OFEM_SCRATCH_TEST_BITS_MSB 31
+#define SAND_HAL_KA_OF_OFEM_SCRATCH_TEST_BITS_LSB 0
+#define SAND_HAL_KA_OF_OFEM_SCRATCH_TEST_BITS_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_OF_OFEM_SCRATCH_TEST_BITS_DEFAULT 0x00000000
+
+/* ================================================================
+ * Field info for register KA_OF_OFEM_SCRATCH_MASK */
+#define SAND_HAL_KA_OF_OFEM_SCRATCH_MASK_TEST_BITS_DISINT_MASK 0xffffffff
+#define SAND_HAL_KA_OF_OFEM_SCRATCH_MASK_TEST_BITS_DISINT_SHIFT 0
+#define SAND_HAL_KA_OF_OFEM_SCRATCH_MASK_TEST_BITS_DISINT_MSB 31
+#define SAND_HAL_KA_OF_OFEM_SCRATCH_MASK_TEST_BITS_DISINT_LSB 0
+#define SAND_HAL_KA_OF_OFEM_SCRATCH_MASK_TEST_BITS_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_OF_OFEM_SCRATCH_MASK_TEST_BITS_DISINT_DEFAULT 0xffffffff
+
+#endif /* matches #ifndef HAL_KA_OF_AUTO_H */
diff --git a/board/sandburst/karef/hal_ka_sc_auto.h b/board/sandburst/karef/hal_ka_sc_auto.h
new file mode 100644
index 0000000..db1cec2
--- /dev/null
+++ b/board/sandburst/karef/hal_ka_sc_auto.h
@@ -0,0 +1,836 @@
+/* ****************************************************************
+ * Common defs for reg spec for chip ka_sc
+ * Auto-generated by trex2: DO NOT HAND-EDIT!!
+ * ****************************************************************
+ */
+
+#ifndef HAL_KA_SC_AUTO_H
+#define HAL_KA_SC_AUTO_H
+
+
+/* ----------------------------------------------------------------
+ * For block: 'scan'
+ */
+
+/* ---- Block instance addressing (for block-select) */
+#define SCAN_BLOCK_ADDR_BIT_L 7
+#define SCAN_BLOCK_ADDR_BIT_H 9
+#define SCAN_BLOCK_ADDR_WIDTH 3
+
+#define SCAN_ADDR 0x0
+
+/* ---- Reg addressing (within block) */
+#define SCAN_REG_ADDR_BIT_L 2
+#define SCAN_REG_ADDR_BIT_H 6
+#define SCAN_REG_ADDR_WIDTH 5
+
+
+/* ================================================================
+ * ---- Register KA_SC_SCAN_REVISION */
+#define SAND_HAL_KA_SC_SCAN_REVISION_OFFSET 0x000
+#ifndef SAND_HAL_KA_SC_SCAN_REVISION_NO_TEST_MASK
+#define SAND_HAL_KA_SC_SCAN_REVISION_NO_TEST_MASK 0x000
+#endif
+#define SAND_HAL_KA_SC_SCAN_REVISION_MASK 0xffffffff
+#define SAND_HAL_KA_SC_SCAN_REVISION_MSB 31
+#define SAND_HAL_KA_SC_SCAN_REVISION_LSB 0
+
+/* ================================================================
+ * ---- Register KA_SC_SCAN_RESET */
+#define SAND_HAL_KA_SC_SCAN_RESET_OFFSET 0x004
+#ifndef SAND_HAL_KA_SC_SCAN_RESET_NO_TEST_MASK
+#define SAND_HAL_KA_SC_SCAN_RESET_NO_TEST_MASK 0x000
+#endif
+#define SAND_HAL_KA_SC_SCAN_RESET_MASK 0xffffffff
+#define SAND_HAL_KA_SC_SCAN_RESET_MSB 31
+#define SAND_HAL_KA_SC_SCAN_RESET_LSB 0
+
+/* ================================================================
+ * ---- Register KA_SC_SCAN_STATUS */
+#define SAND_HAL_KA_SC_SCAN_STATUS_OFFSET 0x008
+#ifndef SAND_HAL_KA_SC_SCAN_STATUS_NO_TEST_MASK
+#define SAND_HAL_KA_SC_SCAN_STATUS_NO_TEST_MASK 0x000
+#endif
+#define SAND_HAL_KA_SC_SCAN_STATUS_MASK 0xffffffff
+#define SAND_HAL_KA_SC_SCAN_STATUS_MSB 31
+#define SAND_HAL_KA_SC_SCAN_STATUS_LSB 0
+
+/* ================================================================
+ * ---- Register KA_SC_SCAN_CNTL */
+#define SAND_HAL_KA_SC_SCAN_CNTL_OFFSET 0x01c
+#ifndef SAND_HAL_KA_SC_SCAN_CNTL_NO_TEST_MASK
+#define SAND_HAL_KA_SC_SCAN_CNTL_NO_TEST_MASK 0x000
+#endif
+#define SAND_HAL_KA_SC_SCAN_CNTL_MASK 0xffffffff
+#define SAND_HAL_KA_SC_SCAN_CNTL_MSB 31
+#define SAND_HAL_KA_SC_SCAN_CNTL_LSB 0
+
+/* ================================================================
+ * ---- Register KA_SC_SCAN_BRD_INFO */
+#define SAND_HAL_KA_SC_SCAN_BRD_INFO_OFFSET 0x020
+#ifndef SAND_HAL_KA_SC_SCAN_BRD_INFO_NO_TEST_MASK
+#define SAND_HAL_KA_SC_SCAN_BRD_INFO_NO_TEST_MASK 0x000
+#endif
+#define SAND_HAL_KA_SC_SCAN_BRD_INFO_MASK 0xffffffff
+#define SAND_HAL_KA_SC_SCAN_BRD_INFO_MSB 31
+#define SAND_HAL_KA_SC_SCAN_BRD_INFO_LSB 0
+
+/* ================================================================
+ * ---- Register KA_SC_SCAN_SCAN_FROM_0 */
+#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_0_OFFSET 0x024
+#ifndef SAND_HAL_KA_SC_SCAN_SCAN_FROM_0_NO_TEST_MASK
+#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_0_NO_TEST_MASK 0x000
+#endif
+#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_0_MASK 0xffffffff
+#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_0_MSB 31
+#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_0_LSB 0
+
+/* ================================================================
+ * ---- Register KA_SC_SCAN_SCAN_FROM_1 */
+#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_1_OFFSET 0x028
+#ifndef SAND_HAL_KA_SC_SCAN_SCAN_FROM_1_NO_TEST_MASK
+#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_1_NO_TEST_MASK 0x000
+#endif
+#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_1_MASK 0xffffffff
+#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_1_MSB 31
+#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_1_LSB 0
+
+/* ================================================================
+ * ---- Register KA_SC_SCAN_SCAN_TO_0 */
+#define SAND_HAL_KA_SC_SCAN_SCAN_TO_0_OFFSET 0x02c
+#ifndef SAND_HAL_KA_SC_SCAN_SCAN_TO_0_NO_TEST_MASK
+#define SAND_HAL_KA_SC_SCAN_SCAN_TO_0_NO_TEST_MASK 0x000
+#endif
+#define SAND_HAL_KA_SC_SCAN_SCAN_TO_0_MASK 0xffffffff
+#define SAND_HAL_KA_SC_SCAN_SCAN_TO_0_MSB 31
+#define SAND_HAL_KA_SC_SCAN_SCAN_TO_0_LSB 0
+
+/* ================================================================
+ * ---- Register KA_SC_SCAN_SCAN_TO_1 */
+#define SAND_HAL_KA_SC_SCAN_SCAN_TO_1_OFFSET 0x030
+#ifndef SAND_HAL_KA_SC_SCAN_SCAN_TO_1_NO_TEST_MASK
+#define SAND_HAL_KA_SC_SCAN_SCAN_TO_1_NO_TEST_MASK 0x000
+#endif
+#define SAND_HAL_KA_SC_SCAN_SCAN_TO_1_MASK 0xffffffff
+#define SAND_HAL_KA_SC_SCAN_SCAN_TO_1_MSB 31
+#define SAND_HAL_KA_SC_SCAN_SCAN_TO_1_LSB 0
+
+/* ================================================================
+ * ---- Register KA_SC_SCAN_SCAN_CTRL */
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_OFFSET 0x034
+#ifndef SAND_HAL_KA_SC_SCAN_SCAN_CTRL_NO_TEST_MASK
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_NO_TEST_MASK 0x000
+#endif
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_MASK 0xffffffff
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_MSB 31
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_LSB 0
+
+/* ================================================================
+ * ---- Register KA_SC_SCAN_PLL_CTRL */
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_OFFSET 0x038
+#ifndef SAND_HAL_KA_SC_SCAN_PLL_CTRL_NO_TEST_MASK
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_NO_TEST_MASK 0x000
+#endif
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_MASK 0xffffffff
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_MSB 31
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_LSB 0
+
+/* ================================================================
+ * ---- Register KA_SC_SCAN_CORE_CLK_COUNT */
+#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_OFFSET 0x03c
+#ifndef SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_NO_TEST_MASK
+#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_NO_TEST_MASK 0x000
+#endif
+#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_MASK 0xffffffff
+#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_MSB 31
+#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_LSB 0
+
+/* ================================================================
+ * ---- Register KA_SC_SCAN_DR_CLK_COUNT */
+#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_OFFSET 0x040
+#ifndef SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_NO_TEST_MASK
+#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_NO_TEST_MASK 0x000
+#endif
+#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_MASK 0xffffffff
+#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_MSB 31
+#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_LSB 0
+
+/* ================================================================
+ * ---- Register KA_SC_SCAN_SPI_CLK_COUNT */
+#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_OFFSET 0x044
+#ifndef SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_NO_TEST_MASK
+#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_NO_TEST_MASK 0x000
+#endif
+#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_MASK 0xffffffff
+#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_MSB 31
+#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_LSB 0
+
+/* ================================================================
+ * ---- Register KA_SC_SCAN_BRD_BRD_OUT_DATA */
+#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_DATA_OFFSET 0x048
+#ifndef SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_DATA_NO_TEST_MASK
+#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_DATA_NO_TEST_MASK 0x000
+#endif
+#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_DATA_MASK 0xffffffff
+#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_DATA_MSB 31
+#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_DATA_LSB 0
+
+/* ================================================================
+ * ---- Register KA_SC_SCAN_BRD_BRD_OUT_ENABLE */
+#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_ENABLE_OFFSET 0x04c
+#ifndef SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_ENABLE_NO_TEST_MASK
+#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_ENABLE_NO_TEST_MASK 0x000
+#endif
+#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_ENABLE_MASK 0xffffffff
+#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_ENABLE_MSB 31
+#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_ENABLE_LSB 0
+
+/* ================================================================
+ * ---- Register KA_SC_SCAN_BRD_BRD_IN */
+#define SAND_HAL_KA_SC_SCAN_BRD_BRD_IN_OFFSET 0x050
+#ifndef SAND_HAL_KA_SC_SCAN_BRD_BRD_IN_NO_TEST_MASK
+#define SAND_HAL_KA_SC_SCAN_BRD_BRD_IN_NO_TEST_MASK 0x000
+#endif
+#define SAND_HAL_KA_SC_SCAN_BRD_BRD_IN_MASK 0xffffffff
+#define SAND_HAL_KA_SC_SCAN_BRD_BRD_IN_MSB 31
+#define SAND_HAL_KA_SC_SCAN_BRD_BRD_IN_LSB 0
+
+/* ================================================================
+ * ---- Register KA_SC_SCAN_MISC */
+#define SAND_HAL_KA_SC_SCAN_MISC_OFFSET 0x054
+#ifndef SAND_HAL_KA_SC_SCAN_MISC_NO_TEST_MASK
+#define SAND_HAL_KA_SC_SCAN_MISC_NO_TEST_MASK 0x000
+#endif
+#define SAND_HAL_KA_SC_SCAN_MISC_MASK 0xffffffff
+#define SAND_HAL_KA_SC_SCAN_MISC_MSB 31
+#define SAND_HAL_KA_SC_SCAN_MISC_LSB 0
+
+/* ================================================================
+ * ---- Register KA_SC_SCAN_INTERRUPT */
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_OFFSET 0x00c
+#ifndef SAND_HAL_KA_SC_SCAN_INTERRUPT_NO_TEST_MASK
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_NO_TEST_MASK 0x000
+#endif
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK 0xffffffff
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MSB 31
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_LSB 0
+
+/* ================================================================
+ * ---- Register KA_SC_SCAN_INTERRUPT_MASK */
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_OFFSET 0x010
+#ifndef SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_NO_TEST_MASK
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_NO_TEST_MASK 0x000
+#endif
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_MASK 0xffffffff
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_MSB 31
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_LSB 0
+
+/* ================================================================
+ * ---- Register KA_SC_SCAN_SCRATCH */
+#define SAND_HAL_KA_SC_SCAN_SCRATCH_OFFSET 0x014
+#ifndef SAND_HAL_KA_SC_SCAN_SCRATCH_NO_TEST_MASK
+#define SAND_HAL_KA_SC_SCAN_SCRATCH_NO_TEST_MASK 0x000
+#endif
+#define SAND_HAL_KA_SC_SCAN_SCRATCH_MASK 0xffffffff
+#define SAND_HAL_KA_SC_SCAN_SCRATCH_MSB 31
+#define SAND_HAL_KA_SC_SCAN_SCRATCH_LSB 0
+
+/* ================================================================
+ * ---- Register KA_SC_SCAN_SCRATCH_MASK */
+#define SAND_HAL_KA_SC_SCAN_SCRATCH_MASK_OFFSET 0x018
+#ifndef SAND_HAL_KA_SC_SCAN_SCRATCH_MASK_NO_TEST_MASK
+#define SAND_HAL_KA_SC_SCAN_SCRATCH_MASK_NO_TEST_MASK 0x000
+#endif
+#define SAND_HAL_KA_SC_SCAN_SCRATCH_MASK_MASK 0xffffffff
+#define SAND_HAL_KA_SC_SCAN_SCRATCH_MASK_MSB 31
+#define SAND_HAL_KA_SC_SCAN_SCRATCH_MASK_LSB 0
+
+/* ================================================================
+ * Field info for register KA_SC_SCAN_REVISION */
+#define SAND_HAL_KA_SC_SCAN_REVISION_IDENTIFICATION_MASK 0x0000ff00
+#define SAND_HAL_KA_SC_SCAN_REVISION_IDENTIFICATION_SHIFT 8
+#define SAND_HAL_KA_SC_SCAN_REVISION_IDENTIFICATION_MSB 15
+#define SAND_HAL_KA_SC_SCAN_REVISION_IDENTIFICATION_LSB 8
+#define SAND_HAL_KA_SC_SCAN_REVISION_IDENTIFICATION_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_KA_SC_SCAN_REVISION_IDENTIFICATION_DEFAULT 0x00000023
+#define SAND_HAL_KA_SC_SCAN_REVISION_REVISION_MASK 0x000000ff
+#define SAND_HAL_KA_SC_SCAN_REVISION_REVISION_SHIFT 0
+#define SAND_HAL_KA_SC_SCAN_REVISION_REVISION_MSB 7
+#define SAND_HAL_KA_SC_SCAN_REVISION_REVISION_LSB 0
+#define SAND_HAL_KA_SC_SCAN_REVISION_REVISION_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_KA_SC_SCAN_REVISION_REVISION_DEFAULT 0x00000000
+
+/* ================================================================
+ * Field info for register KA_SC_SCAN_RESET */
+#define SAND_HAL_KA_SC_SCAN_RESET_CF_RESET_N_MASK 0x00000200
+#define SAND_HAL_KA_SC_SCAN_RESET_CF_RESET_N_SHIFT 9
+#define SAND_HAL_KA_SC_SCAN_RESET_CF_RESET_N_MSB 9
+#define SAND_HAL_KA_SC_SCAN_RESET_CF_RESET_N_LSB 9
+#define SAND_HAL_KA_SC_SCAN_RESET_CF_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_RESET_CF_RESET_N_DEFAULT 0x00000000
+#define SAND_HAL_KA_SC_SCAN_RESET_BME_RESET_N_MASK 0x00000100
+#define SAND_HAL_KA_SC_SCAN_RESET_BME_RESET_N_SHIFT 8
+#define SAND_HAL_KA_SC_SCAN_RESET_BME_RESET_N_MSB 8
+#define SAND_HAL_KA_SC_SCAN_RESET_BME_RESET_N_LSB 8
+#define SAND_HAL_KA_SC_SCAN_RESET_BME_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_RESET_BME_RESET_N_DEFAULT 0x00000000
+#define SAND_HAL_KA_SC_SCAN_RESET_KA_RESET_N_MASK 0x00000080
+#define SAND_HAL_KA_SC_SCAN_RESET_KA_RESET_N_SHIFT 7
+#define SAND_HAL_KA_SC_SCAN_RESET_KA_RESET_N_MSB 7
+#define SAND_HAL_KA_SC_SCAN_RESET_KA_RESET_N_LSB 7
+#define SAND_HAL_KA_SC_SCAN_RESET_KA_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_RESET_KA_RESET_N_DEFAULT 0x00000000
+#define SAND_HAL_KA_SC_SCAN_RESET_SLAVE_RESET_N_MASK 0x00000040
+#define SAND_HAL_KA_SC_SCAN_RESET_SLAVE_RESET_N_SHIFT 6
+#define SAND_HAL_KA_SC_SCAN_RESET_SLAVE_RESET_N_MSB 6
+#define SAND_HAL_KA_SC_SCAN_RESET_SLAVE_RESET_N_LSB 6
+#define SAND_HAL_KA_SC_SCAN_RESET_SLAVE_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_RESET_SLAVE_RESET_N_DEFAULT 0x00000000
+#define SAND_HAL_KA_SC_SCAN_RESET_OFEM_RESET_N_MASK 0x00000020
+#define SAND_HAL_KA_SC_SCAN_RESET_OFEM_RESET_N_SHIFT 5
+#define SAND_HAL_KA_SC_SCAN_RESET_OFEM_RESET_N_MSB 5
+#define SAND_HAL_KA_SC_SCAN_RESET_OFEM_RESET_N_LSB 5
+#define SAND_HAL_KA_SC_SCAN_RESET_OFEM_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_RESET_OFEM_RESET_N_DEFAULT 0x00000000
+#define SAND_HAL_KA_SC_SCAN_RESET_IFE_A_RESET_N_MASK 0x00000010
+#define SAND_HAL_KA_SC_SCAN_RESET_IFE_A_RESET_N_SHIFT 4
+#define SAND_HAL_KA_SC_SCAN_RESET_IFE_A_RESET_N_MSB 4
+#define SAND_HAL_KA_SC_SCAN_RESET_IFE_A_RESET_N_LSB 4
+#define SAND_HAL_KA_SC_SCAN_RESET_IFE_A_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_RESET_IFE_A_RESET_N_DEFAULT 0x00000000
+#define SAND_HAL_KA_SC_SCAN_RESET_I2C_MUX1_RESET_N_MASK 0x00000008
+#define SAND_HAL_KA_SC_SCAN_RESET_I2C_MUX1_RESET_N_SHIFT 3
+#define SAND_HAL_KA_SC_SCAN_RESET_I2C_MUX1_RESET_N_MSB 3
+#define SAND_HAL_KA_SC_SCAN_RESET_I2C_MUX1_RESET_N_LSB 3
+#define SAND_HAL_KA_SC_SCAN_RESET_I2C_MUX1_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_RESET_I2C_MUX1_RESET_N_DEFAULT 0x00000000
+#define SAND_HAL_KA_SC_SCAN_RESET_PHY0_RESET_N_MASK 0x00000002
+#define SAND_HAL_KA_SC_SCAN_RESET_PHY0_RESET_N_SHIFT 1
+#define SAND_HAL_KA_SC_SCAN_RESET_PHY0_RESET_N_MSB 1
+#define SAND_HAL_KA_SC_SCAN_RESET_PHY0_RESET_N_LSB 1
+#define SAND_HAL_KA_SC_SCAN_RESET_PHY0_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_RESET_PHY0_RESET_N_DEFAULT 0x00000000
+#define SAND_HAL_KA_SC_SCAN_RESET_PHY1_RESET_N_MASK 0x00000001
+#define SAND_HAL_KA_SC_SCAN_RESET_PHY1_RESET_N_SHIFT 0
+#define SAND_HAL_KA_SC_SCAN_RESET_PHY1_RESET_N_MSB 0
+#define SAND_HAL_KA_SC_SCAN_RESET_PHY1_RESET_N_LSB 0
+#define SAND_HAL_KA_SC_SCAN_RESET_PHY1_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_RESET_PHY1_RESET_N_DEFAULT 0x00000000
+
+/* ================================================================
+ * Field info for register KA_SC_SCAN_STATUS */
+#define SAND_HAL_KA_SC_SCAN_STATUS_SPI_LOCK_MASK 0x00000040
+#define SAND_HAL_KA_SC_SCAN_STATUS_SPI_LOCK_SHIFT 6
+#define SAND_HAL_KA_SC_SCAN_STATUS_SPI_LOCK_MSB 6
+#define SAND_HAL_KA_SC_SCAN_STATUS_SPI_LOCK_LSB 6
+#define SAND_HAL_KA_SC_SCAN_STATUS_SPI_LOCK_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_KA_SC_SCAN_STATUS_SPI_LOCK_DEFAULT 0x00000000
+#define SAND_HAL_KA_SC_SCAN_STATUS_DR_LOCK_MASK 0x00000020
+#define SAND_HAL_KA_SC_SCAN_STATUS_DR_LOCK_SHIFT 5
+#define SAND_HAL_KA_SC_SCAN_STATUS_DR_LOCK_MSB 5
+#define SAND_HAL_KA_SC_SCAN_STATUS_DR_LOCK_LSB 5
+#define SAND_HAL_KA_SC_SCAN_STATUS_DR_LOCK_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_KA_SC_SCAN_STATUS_DR_LOCK_DEFAULT 0x00000000
+#define SAND_HAL_KA_SC_SCAN_STATUS_CORE_LOCK_MASK 0x00000010
+#define SAND_HAL_KA_SC_SCAN_STATUS_CORE_LOCK_SHIFT 4
+#define SAND_HAL_KA_SC_SCAN_STATUS_CORE_LOCK_MSB 4
+#define SAND_HAL_KA_SC_SCAN_STATUS_CORE_LOCK_LSB 4
+#define SAND_HAL_KA_SC_SCAN_STATUS_CORE_LOCK_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_KA_SC_SCAN_STATUS_CORE_LOCK_DEFAULT 0x00000000
+#define SAND_HAL_KA_SC_SCAN_STATUS_OFEM_DONE_MASK 0x00000008
+#define SAND_HAL_KA_SC_SCAN_STATUS_OFEM_DONE_SHIFT 3
+#define SAND_HAL_KA_SC_SCAN_STATUS_OFEM_DONE_MSB 3
+#define SAND_HAL_KA_SC_SCAN_STATUS_OFEM_DONE_LSB 3
+#define SAND_HAL_KA_SC_SCAN_STATUS_OFEM_DONE_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_KA_SC_SCAN_STATUS_OFEM_DONE_DEFAULT 0x00000000
+#define SAND_HAL_KA_SC_SCAN_STATUS_PS_A_PRES_N_MASK 0x00000004
+#define SAND_HAL_KA_SC_SCAN_STATUS_PS_A_PRES_N_SHIFT 2
+#define SAND_HAL_KA_SC_SCAN_STATUS_PS_A_PRES_N_MSB 2
+#define SAND_HAL_KA_SC_SCAN_STATUS_PS_A_PRES_N_LSB 2
+#define SAND_HAL_KA_SC_SCAN_STATUS_PS_A_PRES_N_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_KA_SC_SCAN_STATUS_PS_A_PRES_N_DEFAULT 0x00000000
+#define SAND_HAL_KA_SC_SCAN_STATUS_PS_B_PRES_N_MASK 0x00000002
+#define SAND_HAL_KA_SC_SCAN_STATUS_PS_B_PRES_N_SHIFT 1
+#define SAND_HAL_KA_SC_SCAN_STATUS_PS_B_PRES_N_MSB 1
+#define SAND_HAL_KA_SC_SCAN_STATUS_PS_B_PRES_N_LSB 1
+#define SAND_HAL_KA_SC_SCAN_STATUS_PS_B_PRES_N_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_KA_SC_SCAN_STATUS_PS_B_PRES_N_DEFAULT 0x00000000
+#define SAND_HAL_KA_SC_SCAN_STATUS_ALL_GOOD_MASK 0x00000001
+#define SAND_HAL_KA_SC_SCAN_STATUS_ALL_GOOD_SHIFT 0
+#define SAND_HAL_KA_SC_SCAN_STATUS_ALL_GOOD_MSB 0
+#define SAND_HAL_KA_SC_SCAN_STATUS_ALL_GOOD_LSB 0
+#define SAND_HAL_KA_SC_SCAN_STATUS_ALL_GOOD_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_KA_SC_SCAN_STATUS_ALL_GOOD_DEFAULT 0x00000000
+
+/* ================================================================
+ * Field info for register KA_SC_SCAN_CNTL */
+#define SAND_HAL_KA_SC_SCAN_CNTL_SW_PWR_DOWN_MASK 0x00000400
+#define SAND_HAL_KA_SC_SCAN_CNTL_SW_PWR_DOWN_SHIFT 10
+#define SAND_HAL_KA_SC_SCAN_CNTL_SW_PWR_DOWN_MSB 10
+#define SAND_HAL_KA_SC_SCAN_CNTL_SW_PWR_DOWN_LSB 10
+#define SAND_HAL_KA_SC_SCAN_CNTL_SW_PWR_DOWN_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_CNTL_SW_PWR_DOWN_DEFAULT 0x00000000
+#define SAND_HAL_KA_SC_SCAN_CNTL_CORE_CLK_50_EN_MASK 0x00000200
+#define SAND_HAL_KA_SC_SCAN_CNTL_CORE_CLK_50_EN_SHIFT 9
+#define SAND_HAL_KA_SC_SCAN_CNTL_CORE_CLK_50_EN_MSB 9
+#define SAND_HAL_KA_SC_SCAN_CNTL_CORE_CLK_50_EN_LSB 9
+#define SAND_HAL_KA_SC_SCAN_CNTL_CORE_CLK_50_EN_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_CNTL_CORE_CLK_50_EN_DEFAULT 0x00000001
+#define SAND_HAL_KA_SC_SCAN_CNTL_PCI_CLK_EN_MASK 0x00000100
+#define SAND_HAL_KA_SC_SCAN_CNTL_PCI_CLK_EN_SHIFT 8
+#define SAND_HAL_KA_SC_SCAN_CNTL_PCI_CLK_EN_MSB 8
+#define SAND_HAL_KA_SC_SCAN_CNTL_PCI_CLK_EN_LSB 8
+#define SAND_HAL_KA_SC_SCAN_CNTL_PCI_CLK_EN_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_CNTL_PCI_CLK_EN_DEFAULT 0x00000001
+#define SAND_HAL_KA_SC_SCAN_CNTL_TEMP_LED_MASK 0x000000c0
+#define SAND_HAL_KA_SC_SCAN_CNTL_TEMP_LED_SHIFT 6
+#define SAND_HAL_KA_SC_SCAN_CNTL_TEMP_LED_MSB 7
+#define SAND_HAL_KA_SC_SCAN_CNTL_TEMP_LED_LSB 6
+#define SAND_HAL_KA_SC_SCAN_CNTL_TEMP_LED_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_CNTL_TEMP_LED_DEFAULT 0x00000000
+#define SAND_HAL_KA_SC_SCAN_CNTL_FAULT_LED_MASK 0x00000030
+#define SAND_HAL_KA_SC_SCAN_CNTL_FAULT_LED_SHIFT 4
+#define SAND_HAL_KA_SC_SCAN_CNTL_FAULT_LED_MSB 5
+#define SAND_HAL_KA_SC_SCAN_CNTL_FAULT_LED_LSB 4
+#define SAND_HAL_KA_SC_SCAN_CNTL_FAULT_LED_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_CNTL_FAULT_LED_DEFAULT 0x00000000
+#define SAND_HAL_KA_SC_SCAN_CNTL_RS232_R_LED_MASK 0x0000000c
+#define SAND_HAL_KA_SC_SCAN_CNTL_RS232_R_LED_SHIFT 2
+#define SAND_HAL_KA_SC_SCAN_CNTL_RS232_R_LED_MSB 3
+#define SAND_HAL_KA_SC_SCAN_CNTL_RS232_R_LED_LSB 2
+#define SAND_HAL_KA_SC_SCAN_CNTL_RS232_R_LED_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_CNTL_RS232_R_LED_DEFAULT 0x00000000
+#define SAND_HAL_KA_SC_SCAN_CNTL_RS232_L_LED_MASK 0x00000003
+#define SAND_HAL_KA_SC_SCAN_CNTL_RS232_L_LED_SHIFT 0
+#define SAND_HAL_KA_SC_SCAN_CNTL_RS232_L_LED_MSB 1
+#define SAND_HAL_KA_SC_SCAN_CNTL_RS232_L_LED_LSB 0
+#define SAND_HAL_KA_SC_SCAN_CNTL_RS232_L_LED_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_CNTL_RS232_L_LED_DEFAULT 0x00000000
+
+/* ================================================================
+ * Field info for register KA_SC_SCAN_BRD_INFO */
+#define SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_ID_MASK 0x0000f000
+#define SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_ID_SHIFT 12
+#define SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_ID_MSB 15
+#define SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_ID_LSB 12
+#define SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_ID_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_ID_DEFAULT 0x00000000
+#define SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_REV_MASK 0x00000300
+#define SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_REV_SHIFT 8
+#define SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_REV_MSB 9
+#define SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_REV_LSB 8
+#define SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_REV_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_REV_DEFAULT 0x00000000
+#define SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_ID_MASK 0x000000f0
+#define SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_ID_SHIFT 4
+#define SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_ID_MSB 7
+#define SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_ID_LSB 4
+#define SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_ID_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_ID_DEFAULT 0x00000000
+#define SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_REV_MASK 0x00000003
+#define SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_REV_SHIFT 0
+#define SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_REV_MSB 1
+#define SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_REV_LSB 0
+#define SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_REV_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_REV_DEFAULT 0x00000000
+
+/* ================================================================
+ * Field info for register KA_SC_SCAN_SCAN_FROM_0 */
+#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_0_SCAN_OUT_MASK 0xffffffff
+#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_0_SCAN_OUT_SHIFT 0
+#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_0_SCAN_OUT_MSB 31
+#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_0_SCAN_OUT_LSB 0
+#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_0_SCAN_OUT_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_0_SCAN_OUT_DEFAULT 0x00000000
+
+/* ================================================================
+ * Field info for register KA_SC_SCAN_SCAN_FROM_1 */
+#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_1_SCAN_OUT_MASK 0xffffffff
+#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_1_SCAN_OUT_SHIFT 0
+#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_1_SCAN_OUT_MSB 31
+#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_1_SCAN_OUT_LSB 0
+#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_1_SCAN_OUT_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_1_SCAN_OUT_DEFAULT 0x00000000
+
+/* ================================================================
+ * Field info for register KA_SC_SCAN_SCAN_TO_0 */
+#define SAND_HAL_KA_SC_SCAN_SCAN_TO_0_SCAN_IN_MASK 0xffffffff
+#define SAND_HAL_KA_SC_SCAN_SCAN_TO_0_SCAN_IN_SHIFT 0
+#define SAND_HAL_KA_SC_SCAN_SCAN_TO_0_SCAN_IN_MSB 31
+#define SAND_HAL_KA_SC_SCAN_SCAN_TO_0_SCAN_IN_LSB 0
+#define SAND_HAL_KA_SC_SCAN_SCAN_TO_0_SCAN_IN_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_SCAN_TO_0_SCAN_IN_DEFAULT 0x00000000
+
+/* ================================================================
+ * Field info for register KA_SC_SCAN_SCAN_TO_1 */
+#define SAND_HAL_KA_SC_SCAN_SCAN_TO_1_SCAN_IN_MASK 0xffffffff
+#define SAND_HAL_KA_SC_SCAN_SCAN_TO_1_SCAN_IN_SHIFT 0
+#define SAND_HAL_KA_SC_SCAN_SCAN_TO_1_SCAN_IN_MSB 31
+#define SAND_HAL_KA_SC_SCAN_SCAN_TO_1_SCAN_IN_LSB 0
+#define SAND_HAL_KA_SC_SCAN_SCAN_TO_1_SCAN_IN_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_SCAN_TO_1_SCAN_IN_DEFAULT 0x00000000
+
+/* ================================================================
+ * Field info for register KA_SC_SCAN_SCAN_CTRL */
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCI_SEL_BM_MASK 0x04000000
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCI_SEL_BM_SHIFT 26
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCI_SEL_BM_MSB 26
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCI_SEL_BM_LSB 26
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCI_SEL_BM_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCI_SEL_BM_DEFAULT 0x00000000
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_TEST_MODE_MASK 0x03000000
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_TEST_MODE_SHIFT 24
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_TEST_MODE_MSB 25
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_TEST_MODE_LSB 24
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_TEST_MODE_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_TEST_MODE_DEFAULT 0x00000000
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_TEST_EN_MASK 0x00100000
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_TEST_EN_SHIFT 20
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_TEST_EN_MSB 20
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_TEST_EN_LSB 20
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_TEST_EN_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_TEST_EN_DEFAULT 0x00000000
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_PO_MASK 0x00080000
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_PO_SHIFT 19
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_PO_MSB 19
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_PO_LSB 19
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_PO_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_PO_DEFAULT 0x00000000
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_PI_MASK 0x00040000
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_PI_SHIFT 18
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_PI_MSB 18
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_PI_LSB 18
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_PI_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_PI_DEFAULT 0x00000000
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_CLK_MASK 0x00020000
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_CLK_SHIFT 17
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_CLK_MSB 17
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_CLK_LSB 17
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_CLK_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_CLK_DEFAULT 0x00000000
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_MASK 0x00010000
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_SHIFT 16
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_MSB 16
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_LSB 16
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_DEFAULT 0x00000000
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_ENABLE_DRIVERS_MASK 0x00001000
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_ENABLE_DRIVERS_SHIFT 12
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_ENABLE_DRIVERS_MSB 12
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_ENABLE_DRIVERS_LSB 12
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_ENABLE_DRIVERS_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_ENABLE_DRIVERS_DEFAULT 0x00000000
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_REF_CLK_MASK 0x00000800
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_REF_CLK_SHIFT 11
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_REF_CLK_MSB 11
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_REF_CLK_LSB 11
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_REF_CLK_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_REF_CLK_DEFAULT 0x00000000
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_SPI_CLK_MASK 0x00000400
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_SPI_CLK_SHIFT 10
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_SPI_CLK_MSB 10
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_SPI_CLK_LSB 10
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_SPI_CLK_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_SPI_CLK_DEFAULT 0x00000000
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_DR_CLK_MASK 0x00000200
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_DR_CLK_SHIFT 9
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_DR_CLK_MSB 9
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_DR_CLK_LSB 9
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_DR_CLK_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_DR_CLK_DEFAULT 0x00000000
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_CORE_CLK_MASK 0x00000100
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_CORE_CLK_SHIFT 8
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_CORE_CLK_MSB 8
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_CORE_CLK_LSB 8
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_CORE_CLK_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_CORE_CLK_DEFAULT 0x00000000
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_REF_CLK_SEL_MASK 0x00000018
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_REF_CLK_SEL_SHIFT 3
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_REF_CLK_SEL_MSB 4
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_REF_CLK_SEL_LSB 3
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_REF_CLK_SEL_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_REF_CLK_SEL_DEFAULT 0x00000000
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_SPI_CLK_SEL_MASK 0x00000004
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_SPI_CLK_SEL_SHIFT 2
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_SPI_CLK_SEL_MSB 2
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_SPI_CLK_SEL_LSB 2
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_SPI_CLK_SEL_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_SPI_CLK_SEL_DEFAULT 0x00000000
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_DR_CLK_SEL_MASK 0x00000002
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_DR_CLK_SEL_SHIFT 1
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_DR_CLK_SEL_MSB 1
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_DR_CLK_SEL_LSB 1
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_DR_CLK_SEL_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_DR_CLK_SEL_DEFAULT 0x00000000
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_CORE_CLK_SEL_MASK 0x00000001
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_CORE_CLK_SEL_SHIFT 0
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_CORE_CLK_SEL_MSB 0
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_CORE_CLK_SEL_LSB 0
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_CORE_CLK_SEL_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_CORE_CLK_SEL_DEFAULT 0x00000000
+
+/* ================================================================
+ * Field info for register KA_SC_SCAN_PLL_CTRL */
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_RIPPLE_RESET_MASK 0x00002000
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_RIPPLE_RESET_SHIFT 13
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_RIPPLE_RESET_MSB 13
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_RIPPLE_RESET_LSB 13
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_RIPPLE_RESET_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_RIPPLE_RESET_DEFAULT 0x00000000
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_RESET_MASK 0x00001000
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_RESET_SHIFT 12
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_RESET_MSB 12
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_RESET_LSB 12
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_RESET_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_RESET_DEFAULT 0x00000000
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_BYPASS_MASK 0x00000800
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_BYPASS_SHIFT 11
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_BYPASS_MSB 11
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_BYPASS_LSB 11
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_BYPASS_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_BYPASS_DEFAULT 0x00000000
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_ACBYPASS_MASK 0x00000400
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_ACBYPASS_SHIFT 10
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_ACBYPASS_MSB 10
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_ACBYPASS_LSB 10
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_ACBYPASS_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_ACBYPASS_DEFAULT 0x00000000
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_EXTCLK_MASK 0x00000200
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_EXTCLK_SHIFT 9
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_EXTCLK_MSB 9
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_EXTCLK_LSB 9
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_EXTCLK_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_EXTCLK_DEFAULT 0x00000000
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_BYPASS_MASK 0x00000100
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_BYPASS_SHIFT 8
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_BYPASS_MSB 8
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_BYPASS_LSB 8
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_BYPASS_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_BYPASS_DEFAULT 0x00000000
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_ACBYPASS_MASK 0x00000080
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_ACBYPASS_SHIFT 7
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_ACBYPASS_MSB 7
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_ACBYPASS_LSB 7
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_ACBYPASS_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_ACBYPASS_DEFAULT 0x00000000
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_EXTCLK_MASK 0x00000040
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_EXTCLK_SHIFT 6
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_EXTCLK_MSB 6
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_EXTCLK_LSB 6
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_EXTCLK_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_EXTCLK_DEFAULT 0x00000000
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_BYPASS_MASK 0x00000020
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_BYPASS_SHIFT 5
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_BYPASS_MSB 5
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_BYPASS_LSB 5
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_BYPASS_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_BYPASS_DEFAULT 0x00000000
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_ACBYPASS_MASK 0x00000010
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_ACBYPASS_SHIFT 4
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_ACBYPASS_MSB 4
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_ACBYPASS_LSB 4
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_ACBYPASS_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_ACBYPASS_DEFAULT 0x00000000
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_EXTCLK_MASK 0x00000008
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_EXTCLK_SHIFT 3
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_EXTCLK_MSB 3
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_EXTCLK_LSB 3
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_EXTCLK_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_EXTCLK_DEFAULT 0x00000000
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_M_N_SEL_MASK 0x00000007
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_M_N_SEL_SHIFT 0
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_M_N_SEL_MSB 2
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_M_N_SEL_LSB 0
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_M_N_SEL_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_M_N_SEL_DEFAULT 0x00000000
+
+/* ================================================================
+ * Field info for register KA_SC_SCAN_CORE_CLK_COUNT */
+#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_CLEAR_RIPPLE_CNT_N_MASK 0x02000000
+#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_CLEAR_RIPPLE_CNT_N_SHIFT 25
+#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_CLEAR_RIPPLE_CNT_N_MSB 25
+#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_CLEAR_RIPPLE_CNT_N_LSB 25
+#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_CLEAR_RIPPLE_CNT_N_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_CLEAR_RIPPLE_CNT_N_DEFAULT 0x00000000
+#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_ENABLE_RIPPLE_CNT_MASK 0x01000000
+#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_ENABLE_RIPPLE_CNT_SHIFT 24
+#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_ENABLE_RIPPLE_CNT_MSB 24
+#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_ENABLE_RIPPLE_CNT_LSB 24
+#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_ENABLE_RIPPLE_CNT_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_ENABLE_RIPPLE_CNT_DEFAULT 0x00000000
+#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_RIPPLE_COUNT_MASK 0x00ffffff
+#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_RIPPLE_COUNT_SHIFT 0
+#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_RIPPLE_COUNT_MSB 23
+#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_RIPPLE_COUNT_LSB 0
+#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_RIPPLE_COUNT_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_RIPPLE_COUNT_DEFAULT 0x00000000
+
+/* ================================================================
+ * Field info for register KA_SC_SCAN_DR_CLK_COUNT */
+#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_CLEAR_RIPPLE_CNT_N_MASK 0x02000000
+#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_CLEAR_RIPPLE_CNT_N_SHIFT 25
+#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_CLEAR_RIPPLE_CNT_N_MSB 25
+#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_CLEAR_RIPPLE_CNT_N_LSB 25
+#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_CLEAR_RIPPLE_CNT_N_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_CLEAR_RIPPLE_CNT_N_DEFAULT 0x00000000
+#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_ENABLE_RIPPLE_CNT_MASK 0x01000000
+#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_ENABLE_RIPPLE_CNT_SHIFT 24
+#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_ENABLE_RIPPLE_CNT_MSB 24
+#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_ENABLE_RIPPLE_CNT_LSB 24
+#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_ENABLE_RIPPLE_CNT_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_ENABLE_RIPPLE_CNT_DEFAULT 0x00000000
+#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_RIPPLE_COUNT_MASK 0x00ffffff
+#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_RIPPLE_COUNT_SHIFT 0
+#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_RIPPLE_COUNT_MSB 23
+#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_RIPPLE_COUNT_LSB 0
+#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_RIPPLE_COUNT_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_RIPPLE_COUNT_DEFAULT 0x00000000
+
+/* ================================================================
+ * Field info for register KA_SC_SCAN_SPI_CLK_COUNT */
+#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_CLEAR_RIPPLE_CNT_N_MASK 0x02000000
+#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_CLEAR_RIPPLE_CNT_N_SHIFT 25
+#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_CLEAR_RIPPLE_CNT_N_MSB 25
+#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_CLEAR_RIPPLE_CNT_N_LSB 25
+#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_CLEAR_RIPPLE_CNT_N_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_CLEAR_RIPPLE_CNT_N_DEFAULT 0x00000000
+#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_ENABLE_RIPPLE_CNT_MASK 0x01000000
+#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_ENABLE_RIPPLE_CNT_SHIFT 24
+#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_ENABLE_RIPPLE_CNT_MSB 24
+#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_ENABLE_RIPPLE_CNT_LSB 24
+#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_ENABLE_RIPPLE_CNT_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_ENABLE_RIPPLE_CNT_DEFAULT 0x00000000
+#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_RIPPLE_COUNT_MASK 0x00ffffff
+#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_RIPPLE_COUNT_SHIFT 0
+#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_RIPPLE_COUNT_MSB 23
+#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_RIPPLE_COUNT_LSB 0
+#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_RIPPLE_COUNT_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_RIPPLE_COUNT_DEFAULT 0x00000000
+
+/* ================================================================
+ * Field info for register KA_SC_SCAN_BRD_BRD_OUT_DATA */
+#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_DATA_BRD_OUT_MASK 0x001fffff
+#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_DATA_BRD_OUT_SHIFT 0
+#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_DATA_BRD_OUT_MSB 20
+#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_DATA_BRD_OUT_LSB 0
+#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_DATA_BRD_OUT_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_DATA_BRD_OUT_DEFAULT 0x00000000
+
+/* ================================================================
+ * Field info for register KA_SC_SCAN_BRD_BRD_OUT_ENABLE */
+#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_ENABLE_BRD_OUT_EN_MASK 0x001fffff
+#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_ENABLE_BRD_OUT_EN_SHIFT 0
+#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_ENABLE_BRD_OUT_EN_MSB 20
+#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_ENABLE_BRD_OUT_EN_LSB 0
+#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_ENABLE_BRD_OUT_EN_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_ENABLE_BRD_OUT_EN_DEFAULT 0x00000000
+
+/* ================================================================
+ * Field info for register KA_SC_SCAN_BRD_BRD_IN */
+#define SAND_HAL_KA_SC_SCAN_BRD_BRD_IN_BRD_IN_MASK 0x001fffff
+#define SAND_HAL_KA_SC_SCAN_BRD_BRD_IN_BRD_IN_SHIFT 0
+#define SAND_HAL_KA_SC_SCAN_BRD_BRD_IN_BRD_IN_MSB 20
+#define SAND_HAL_KA_SC_SCAN_BRD_BRD_IN_BRD_IN_LSB 0
+#define SAND_HAL_KA_SC_SCAN_BRD_BRD_IN_BRD_IN_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_KA_SC_SCAN_BRD_BRD_IN_BRD_IN_DEFAULT 0x00000000
+
+/* ================================================================
+ * Field info for register KA_SC_SCAN_MISC */
+#define SAND_HAL_KA_SC_SCAN_MISC_MARG_START_MASK 0x00000002
+#define SAND_HAL_KA_SC_SCAN_MISC_MARG_START_SHIFT 1
+#define SAND_HAL_KA_SC_SCAN_MISC_MARG_START_MSB 1
+#define SAND_HAL_KA_SC_SCAN_MISC_MARG_START_LSB 1
+#define SAND_HAL_KA_SC_SCAN_MISC_MARG_START_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_MISC_MARG_START_DEFAULT 0x00000000
+#define SAND_HAL_KA_SC_SCAN_MISC_MARG_READY_MASK 0x00000001
+#define SAND_HAL_KA_SC_SCAN_MISC_MARG_READY_SHIFT 0
+#define SAND_HAL_KA_SC_SCAN_MISC_MARG_READY_MSB 0
+#define SAND_HAL_KA_SC_SCAN_MISC_MARG_READY_LSB 0
+#define SAND_HAL_KA_SC_SCAN_MISC_MARG_READY_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_KA_SC_SCAN_MISC_MARG_READY_DEFAULT 0x00000000
+
+/* ================================================================
+ * Field info for register KA_SC_SCAN_INTERRUPT */
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_BME_TIMEOUT_MASK 0x00000010
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_BME_TIMEOUT_SHIFT 4
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_BME_TIMEOUT_MSB 4
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_BME_TIMEOUT_LSB 4
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_BME_TIMEOUT_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_BME_TIMEOUT_DEFAULT 0x00000000
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_OVER_TEMP_A_MASK 0x00000008
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_OVER_TEMP_A_SHIFT 3
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_OVER_TEMP_A_MSB 3
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_OVER_TEMP_A_LSB 3
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_OVER_TEMP_A_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_OVER_TEMP_A_DEFAULT 0x00000000
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_OVER_TEMP_B_MASK 0x00000004
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_OVER_TEMP_B_SHIFT 2
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_OVER_TEMP_B_MSB 2
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_OVER_TEMP_B_LSB 2
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_OVER_TEMP_B_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_OVER_TEMP_B_DEFAULT 0x00000000
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_POWER_FAIL_A_MASK 0x00000002
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_POWER_FAIL_A_SHIFT 1
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_POWER_FAIL_A_MSB 1
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_POWER_FAIL_A_LSB 1
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_POWER_FAIL_A_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_POWER_FAIL_A_DEFAULT 0x00000000
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_POWER_FAIL_B_MASK 0x00000001
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_POWER_FAIL_B_SHIFT 0
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_POWER_FAIL_B_MSB 0
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_POWER_FAIL_B_LSB 0
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_POWER_FAIL_B_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_POWER_FAIL_B_DEFAULT 0x00000000
+
+/* ================================================================
+ * Field info for register KA_SC_SCAN_INTERRUPT_MASK */
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_BME_TIMEOUT_DISINT_MASK 0x00000010
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_BME_TIMEOUT_DISINT_SHIFT 4
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_BME_TIMEOUT_DISINT_MSB 4
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_BME_TIMEOUT_DISINT_LSB 4
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_BME_TIMEOUT_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_BME_TIMEOUT_DISINT_DEFAULT 0x00000001
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_OVER_TEMP_A_DISINT_MASK 0x00000008
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_OVER_TEMP_A_DISINT_SHIFT 3
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_OVER_TEMP_A_DISINT_MSB 3
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_OVER_TEMP_A_DISINT_LSB 3
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_OVER_TEMP_A_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_OVER_TEMP_A_DISINT_DEFAULT 0x00000001
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_OVER_TEMP_B_DISINT_MASK 0x00000004
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_OVER_TEMP_B_DISINT_SHIFT 2
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_OVER_TEMP_B_DISINT_MSB 2
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_OVER_TEMP_B_DISINT_LSB 2
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_OVER_TEMP_B_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_OVER_TEMP_B_DISINT_DEFAULT 0x00000001
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_POWER_FAIL_A_DISINT_MASK 0x00000002
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_POWER_FAIL_A_DISINT_SHIFT 1
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_POWER_FAIL_A_DISINT_MSB 1
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_POWER_FAIL_A_DISINT_LSB 1
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_POWER_FAIL_A_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_POWER_FAIL_A_DISINT_DEFAULT 0x00000001
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_POWER_FAIL_B_DISINT_MASK 0x00000001
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_POWER_FAIL_B_DISINT_SHIFT 0
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_POWER_FAIL_B_DISINT_MSB 0
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_POWER_FAIL_B_DISINT_LSB 0
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_POWER_FAIL_B_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_POWER_FAIL_B_DISINT_DEFAULT 0x00000001
+
+/* ================================================================
+ * Field info for register KA_SC_SCAN_SCRATCH */
+#define SAND_HAL_KA_SC_SCAN_SCRATCH_TEST_BITS_MASK 0xffffffff
+#define SAND_HAL_KA_SC_SCAN_SCRATCH_TEST_BITS_SHIFT 0
+#define SAND_HAL_KA_SC_SCAN_SCRATCH_TEST_BITS_MSB 31
+#define SAND_HAL_KA_SC_SCAN_SCRATCH_TEST_BITS_LSB 0
+#define SAND_HAL_KA_SC_SCAN_SCRATCH_TEST_BITS_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_SCRATCH_TEST_BITS_DEFAULT 0x00000000
+
+/* ================================================================
+ * Field info for register KA_SC_SCAN_SCRATCH_MASK */
+#define SAND_HAL_KA_SC_SCAN_SCRATCH_MASK_TEST_BITS_DISINT_MASK 0xffffffff
+#define SAND_HAL_KA_SC_SCAN_SCRATCH_MASK_TEST_BITS_DISINT_SHIFT 0
+#define SAND_HAL_KA_SC_SCAN_SCRATCH_MASK_TEST_BITS_DISINT_MSB 31
+#define SAND_HAL_KA_SC_SCAN_SCRATCH_MASK_TEST_BITS_DISINT_LSB 0
+#define SAND_HAL_KA_SC_SCAN_SCRATCH_MASK_TEST_BITS_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_SCRATCH_MASK_TEST_BITS_DISINT_DEFAULT 0xffffffff
+
+#endif /* matches #ifndef HAL_KA_SC_AUTO_H */
diff --git a/board/sandburst/karef/init.S b/board/sandburst/karef/init.S
new file mode 100644
index 0000000..b1d47a4
--- /dev/null
+++ b/board/sandburst/karef/init.S
@@ -0,0 +1,101 @@
+/*
+* Copyright (C) 2005 Sandburst Corporation
+*
+* See file CREDITS for list of people who contributed to this
+* project.
+*
+* This program is free software; you can redistribute it and/or
+* modify it under the terms of the GNU General Public License as
+* published by the Free Software Foundation; either version 2 of
+* the License, or (at your option) any later version.
+*
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with this program; if not, write to the Free Software
+* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+* MA 02111-1307 USA
+*/
+/*
+ * Ported from Ebony init.S by Travis B. Sawyer
+ */
+
+#include <ppc_asm.tmpl>
+#include <config.h>
+
+/* General */
+#define TLB_VALID 0x00000200
+
+/* Supported page sizes */
+
+#define SZ_1K 0x00000000
+#define SZ_4K 0x00000010
+#define SZ_16K 0x00000020
+#define SZ_64K 0x00000030
+#define SZ_256K 0x00000040
+#define SZ_1M 0x00000050
+#define SZ_16M 0x00000070
+#define SZ_256M 0x00000090
+
+/* Storage attributes */
+#define SA_W 0x00000800 /* Write-through */
+#define SA_I 0x00000400 /* Caching inhibited */
+#define SA_M 0x00000200 /* Memory coherence */
+#define SA_G 0x00000100 /* Guarded */
+#define SA_E 0x00000080 /* Endian */
+
+/* Access control */
+#define AC_X 0x00000024 /* Execute */
+#define AC_W 0x00000012 /* Write */
+#define AC_R 0x00000009 /* Read */
+
+/* Some handy macros */
+
+#define EPN(e) ((e) & 0xfffffc00)
+#define TLB0(epn,sz) ( (EPN((epn)) | (sz) | TLB_VALID ) )
+#define TLB1(rpn,erpn) ( ((rpn)&0xfffffc00) | (erpn) )
+#define TLB2(a) ( (a)&0x00000fbf )
+
+#define tlbtab_start\
+ mflr r1 ;\
+ bl 0f ;
+
+#define tlbtab_end\
+ .long 0, 0, 0 ; \
+0: mflr r0 ; \
+ mtlr r1 ; \
+ blr ;
+
+#define tlbentry(epn,sz,rpn,erpn,attr)\
+ .long TLB0(epn,sz),TLB1(rpn,erpn),TLB2(attr)
+
+
+/**************************************************************************
+ * TLB TABLE
+ *
+ * This table is used by the cpu boot code to setup the initial tlb
+ * entries. Rather than make broad assumptions in the cpu source tree,
+ * this table lets each board set things up however they like.
+ *
+ * Pointer to the table is returned in r1
+ *
+ *************************************************************************/
+
+ .section .bootpg,"ax"
+ .globl tlbtab
+
+tlbtab:
+ tlbtab_start
+ tlbentry( 0xf0000000, SZ_256M, 0xf0000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I)
+ tlbentry( CFG_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_R|AC_W|SA_G|SA_I)
+ tlbentry( CFG_ISRAM_BASE, SZ_256K, 0x80000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I)
+ tlbentry( CFG_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
+ tlbentry( CFG_SDRAM_BASE+0x10000000, SZ_256M, 0x10000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
+ tlbentry( CFG_SDRAM_BASE+0x20000000, SZ_256M, 0x20000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
+ tlbentry( CFG_SDRAM_BASE+0x30000000, SZ_256M, 0x30000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
+ tlbentry( CFG_PCI_BASE, SZ_256M, 0x00000000, 2, AC_R|AC_W|SA_G|SA_I )
+ tlbentry( CFG_PCI_MEMBASE, SZ_256M, 0x00000000, 3, AC_R|AC_W|SA_G|SA_I )
+ tlbtab_end
diff --git a/board/sandburst/karef/karef.c b/board/sandburst/karef/karef.c
new file mode 100644
index 0000000..7a98f5b
--- /dev/null
+++ b/board/sandburst/karef/karef.c
@@ -0,0 +1,607 @@
+/*
+ * Copyright (C) 2005 Sandburst Corporation
+ * Travis B. Sawyer
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <common.h>
+#include <command.h>
+#include "karef.h"
+#include "karef_version.h"
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <spd_sdram.h>
+#include <i2c.h>
+#include "../common/sb_common.h"
+#include "../common/ppc440gx_i2c.h"
+
+
+
+void fpga_init (void);
+
+KAREF_BOARD_ID_ST board_id_as[] =
+{
+ {"Undefined"}, /* Not specified */
+ {"Kamino Reference Design"},
+ {"Reserved"}, /* Reserved for future use */
+ {"Reserved"}, /* Reserved for future use */
+};
+
+KAREF_BOARD_ID_ST ofem_board_id_as[] =
+{
+ {"Undefined"},
+ {"1x10 + 10x2"},
+ {"Reserved"},
+ {"Reserved"},
+};
+
+
+/*************************************************************************
+ * board_early_init_f
+ *
+ * Setup chip selects, initialize the Opto-FPGA, initialize
+ * interrupt polarity and triggers.
+ *
+ ************************************************************************/
+int board_early_init_f (void)
+{
+ ppc440_gpio_regs_t *gpio_regs;
+
+ /* Enable GPIO interrupts */
+ mtsdr(sdr_pfc0, 0x00103E00);
+
+ /* Setup access for LEDs, and system topology info */
+ gpio_regs = (ppc440_gpio_regs_t *)CFG_GPIO_BASE;
+ gpio_regs->open_drain = SBCOMMON_GPIO_SYS_LEDS;
+ gpio_regs->tri_state = SBCOMMON_GPIO_DBGLEDS;
+
+ /* Turn on all the leds for now */
+ gpio_regs->out = SBCOMMON_GPIO_LEDS;
+
+ /*--------------------------------------------------------------------+
+ | Initialize EBC CONFIG
+ +-------------------------------------------------------------------*/
+ mtebc(xbcfg,
+ EBC_CFG_LE_UNLOCK | EBC_CFG_PTD_ENABLE |
+ EBC_CFG_RTC_64PERCLK | EBC_CFG_ATC_PREVIOUS |
+ EBC_CFG_DTC_PREVIOUS | EBC_CFG_CTC_PREVIOUS |
+ EBC_CFG_EMC_DEFAULT | EBC_CFG_PME_DISABLE |
+ EBC_CFG_PR_32);
+
+ /*--------------------------------------------------------------------+
+ | 1/2 MB FLASH. Initialize bank 0 with default values.
+ +-------------------------------------------------------------------*/
+ mtebc(pb0ap,
+ EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(8) |
+ EBC_BXAP_BCE_DISABLE | EBC_BXAP_CSN_ENCODE(1) |
+ EBC_BXAP_OEN_ENCODE(1)| EBC_BXAP_WBN_ENCODE(1) |
+ EBC_BXAP_WBF_ENCODE(1)| EBC_BXAP_TH_ENCODE(1) |
+ EBC_BXAP_RE_DISABLED | EBC_BXAP_BEM_WRITEONLY |
+ EBC_BXAP_PEN_DISABLED);
+
+ mtebc(pb0cr, EBC_BXCR_BAS_ENCODE(CFG_FLASH_BASE) |
+ EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_8BIT);
+ /*--------------------------------------------------------------------+
+ | 8KB NVRAM/RTC. Initialize bank 1 with default values.
+ +-------------------------------------------------------------------*/
+ mtebc(pb1ap,
+ EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(10) |
+ EBC_BXAP_BCE_DISABLE | EBC_BXAP_CSN_ENCODE(1) |
+ EBC_BXAP_OEN_ENCODE(1)| EBC_BXAP_WBN_ENCODE(1) |
+ EBC_BXAP_WBF_ENCODE(1)| EBC_BXAP_TH_ENCODE(1) |
+ EBC_BXAP_RE_DISABLED | EBC_BXAP_BEM_WRITEONLY |
+ EBC_BXAP_PEN_DISABLED);
+
+ mtebc(pb1cr, EBC_BXCR_BAS_ENCODE(0x48000000) |
+ EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_8BIT);
+
+ /*--------------------------------------------------------------------+
+ | Compact Flash, uses 2 Chip Selects (2 & 6)
+ +-------------------------------------------------------------------*/
+ mtebc(pb2ap,
+ EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(8) |
+ EBC_BXAP_BCE_DISABLE | EBC_BXAP_CSN_ENCODE(1) |
+ EBC_BXAP_OEN_ENCODE(1)| EBC_BXAP_WBN_ENCODE(1) |
+ EBC_BXAP_WBF_ENCODE(0)| EBC_BXAP_TH_ENCODE(1) |
+ EBC_BXAP_RE_DISABLED | EBC_BXAP_BEM_WRITEONLY |
+ EBC_BXAP_PEN_DISABLED);
+
+ mtebc(pb2cr, EBC_BXCR_BAS_ENCODE(0xF0000000) |
+ EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_16BIT);
+
+ /*--------------------------------------------------------------------+
+ | KaRef Scan FPGA. Initialize bank 3 with default values.
+ +-------------------------------------------------------------------*/
+ mtebc(pb5ap,
+ EBC_BXAP_RE_ENABLED | EBC_BXAP_SOR_NONDELAYED |
+ EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(3) |
+ EBC_BXAP_TH_ENCODE(1) | EBC_BXAP_WBF_ENCODE(0) |
+ EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_PEN_DISABLED |
+ EBC_BXAP_OEN_ENCODE(1) | EBC_BXAP_BEM_RW);
+
+ mtebc(pb5cr, EBC_BXCR_BAS_ENCODE(0x48200000) |
+ EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_32BIT);
+
+ /*--------------------------------------------------------------------+
+ | MAC A & B for Kamino. OFEM FPGA decodes the addresses
+ | Initialize bank 4 with default values.
+ +-------------------------------------------------------------------*/
+ mtebc(pb4ap,
+ EBC_BXAP_RE_ENABLED | EBC_BXAP_SOR_NONDELAYED |
+ EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(3) |
+ EBC_BXAP_TH_ENCODE(1) | EBC_BXAP_WBF_ENCODE(0) |
+ EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_PEN_DISABLED |
+ EBC_BXAP_OEN_ENCODE(1) | EBC_BXAP_BEM_RW);
+
+ mtebc(pb4cr, EBC_BXCR_BAS_ENCODE(0x48600000) |
+ EBC_BXCR_BS_2MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_32BIT);
+
+ /*--------------------------------------------------------------------+
+ | OFEM FPGA Initialize bank 5 with default values.
+ +-------------------------------------------------------------------*/
+ mtebc(pb3ap,
+ EBC_BXAP_RE_ENABLED | EBC_BXAP_SOR_NONDELAYED |
+ EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(3) |
+ EBC_BXAP_TH_ENCODE(1) | EBC_BXAP_WBF_ENCODE(0) |
+ EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_PEN_DISABLED |
+ EBC_BXAP_OEN_ENCODE(1) | EBC_BXAP_BEM_RW);
+
+
+ mtebc(pb3cr, EBC_BXCR_BAS_ENCODE(0x48400000) |
+ EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_32BIT);
+
+
+ /*--------------------------------------------------------------------+
+ | Compact Flash, uses 2 Chip Selects (2 & 6)
+ +-------------------------------------------------------------------*/
+ mtebc(pb6ap,
+ EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(8) |
+ EBC_BXAP_BCE_DISABLE | EBC_BXAP_CSN_ENCODE(1) |
+ EBC_BXAP_OEN_ENCODE(1)| EBC_BXAP_WBN_ENCODE(1) |
+ EBC_BXAP_WBF_ENCODE(0)| EBC_BXAP_TH_ENCODE(1) |
+ EBC_BXAP_RE_DISABLED | EBC_BXAP_BEM_WRITEONLY |
+ EBC_BXAP_PEN_DISABLED);
+
+ mtebc(pb6cr, EBC_BXCR_BAS_ENCODE(0xF0100000) |
+ EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_16BIT);
+
+ /*--------------------------------------------------------------------+
+ | BME-32. Initialize bank 7 with default values.
+ +-------------------------------------------------------------------*/
+ mtebc(pb7ap,
+ EBC_BXAP_RE_ENABLED | EBC_BXAP_SOR_NONDELAYED |
+ EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(3) |
+ EBC_BXAP_TH_ENCODE(1) | EBC_BXAP_WBF_ENCODE(0) |
+ EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_PEN_DISABLED |
+ EBC_BXAP_OEN_ENCODE(1) | EBC_BXAP_BEM_RW);
+
+ mtebc(pb7cr, EBC_BXCR_BAS_ENCODE(0x48500000) |
+ EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_32BIT);
+
+
+ /*--------------------------------------------------------------------+
+ * Setup the interrupt controller polarities, triggers, etc.
+ +-------------------------------------------------------------------*/
+ mtdcr (uic0sr, 0xffffffff); /* clear all */
+ mtdcr (uic0er, 0x00000000); /* disable all */
+ mtdcr (uic0cr, 0x00000000); /* all non- critical */
+ mtdcr (uic0pr, 0xfffffe03); /* polarity */
+ mtdcr (uic0tr, 0x01c00000); /* trigger edge vs level */
+ mtdcr (uic0vr, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr (uic0sr, 0xffffffff); /* clear all */
+
+ mtdcr (uic1sr, 0xffffffff); /* clear all */
+ mtdcr (uic1er, 0x00000000); /* disable all */
+ mtdcr (uic1cr, 0x00000000); /* all non-critical */
+ mtdcr (uic1pr, 0xffffc8ff); /* polarity */
+ mtdcr (uic1tr, 0x00ff0000); /* trigger edge vs level */
+ mtdcr (uic1vr, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr (uic1sr, 0xffffffff); /* clear all */
+
+ mtdcr (uic2sr, 0xffffffff); /* clear all */
+ mtdcr (uic2er, 0x00000000); /* disable all */
+ mtdcr (uic2cr, 0x00000000); /* all non-critical */
+ mtdcr (uic2pr, 0xffff83ff); /* polarity */
+ mtdcr (uic2tr, 0x00ff8c0f); /* trigger edge vs level */
+ mtdcr (uic2vr, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr (uic2sr, 0xffffffff); /* clear all */
+
+ mtdcr (uicb0sr, 0xfc000000); /* clear all */
+ mtdcr (uicb0er, 0x00000000); /* disable all */
+ mtdcr (uicb0cr, 0x00000000); /* all non-critical */
+ mtdcr (uicb0pr, 0xfc000000);
+ mtdcr (uicb0tr, 0x00000000);
+ mtdcr (uicb0vr, 0x00000001);
+
+ fpga_init();
+
+ return 0;
+}
+
+
+/*************************************************************************
+ * checkboard
+ *
+ * Dump pertinent info to the console
+ *
+ ************************************************************************/
+int checkboard (void)
+{
+ sys_info_t sysinfo;
+ unsigned char brd_rev, brd_id;
+ unsigned short sernum;
+ unsigned char scan_rev, scan_id, ofem_rev, ofem_id;
+ unsigned char ofem_brd_rev, ofem_brd_id;
+ KAREF_FPGA_REGS_ST *karef_ps;
+ OFEM_FPGA_REGS_ST *ofem_ps;
+
+ karef_ps = (KAREF_FPGA_REGS_ST *)CFG_KAREF_FPGA_BASE;
+ ofem_ps = (OFEM_FPGA_REGS_ST *)CFG_OFEM_FPGA_BASE;
+
+ scan_id = (unsigned char)((karef_ps->revision_ul &
+ SAND_HAL_KA_SC_SCAN_REVISION_IDENTIFICATION_MASK)
+ >> SAND_HAL_KA_SC_SCAN_REVISION_IDENTIFICATION_SHIFT);
+
+ scan_rev = (unsigned char)((karef_ps->revision_ul & SAND_HAL_KA_SC_SCAN_REVISION_REVISION_MASK)
+ >> SAND_HAL_KA_SC_SCAN_REVISION_REVISION_SHIFT);
+
+ brd_rev = (unsigned char)((karef_ps->boardinfo_ul & SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_REV_MASK)
+ >> SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_REV_SHIFT);
+
+ brd_id = (unsigned char)((karef_ps->boardinfo_ul & SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_ID_MASK)
+ >> SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_ID_SHIFT);
+
+ ofem_brd_id = (unsigned char)((karef_ps->boardinfo_ul & SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_ID_MASK)
+ >> SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_ID_SHIFT);
+
+ ofem_brd_rev = (unsigned char)((karef_ps->boardinfo_ul & SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_REV_MASK)
+ >> SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_REV_SHIFT);
+
+ if (0xF != ofem_brd_id) {
+ ofem_id = (unsigned char)((ofem_ps->revision_ul &
+ SAND_HAL_KA_OF_OFEM_REVISION_IDENTIFICATION_MASK)
+ >> SAND_HAL_KA_OF_OFEM_REVISION_IDENTIFICATION_SHIFT);
+
+ ofem_rev = (unsigned char)((ofem_ps->revision_ul &
+ SAND_HAL_KA_OF_OFEM_REVISION_REVISION_MASK)
+ >> SAND_HAL_KA_OF_OFEM_REVISION_REVISION_SHIFT);
+ }
+
+ get_sys_info (&sysinfo);
+
+ sernum = sbcommon_get_serial_number();
+
+ printf ("Board: Sandburst Corporation Kamino Reference Design "
+ "Serial Number: %d\n", sernum);
+ printf ("%s\n", KAREF_U_BOOT_REL_STR);
+
+ printf ("Built %s %s by %s\n", __DATE__, __TIME__, BUILDUSER);
+ if (sbcommon_get_master()) {
+ printf("Slot 0 - Master\nSlave board");
+ if (sbcommon_secondary_present())
+ printf(" present\n");
+ else
+ printf(" not detected\n");
+ } else {
+ printf("Slot 1 - Slave\n\n");
+ }
+
+ printf ("ScanFPGA ID:\t0x%02X\tRev: 0x%02X\n", scan_id, scan_rev);
+ printf ("Board Rev:\t0x%02X\tID: 0x%02X\n", brd_rev, brd_id);
+ if(0xF != ofem_brd_id) {
+ printf("OFemFPGA ID:\t0x%02X\tRev: 0x%02X\n", ofem_id, ofem_rev);
+ printf("OFEM Board Rev:\t0x%02X\tID: 0x%02X\n", ofem_brd_id, ofem_brd_rev);
+ }
+
+ printf ("\tVCO: %lu MHz\n", sysinfo.freqVCOMhz / 1000000);
+ printf ("\tCPU: %lu MHz\n", sysinfo.freqProcessor / 1000000);
+ printf ("\tPLB: %lu MHz\n", sysinfo.freqPLB / 1000000);
+ printf ("\tOPB: %lu MHz\n", sysinfo.freqOPB / 1000000);
+ printf ("\tEPB: %lu MHz\n", sysinfo.freqEPB / 1000000);
+
+ /* Fix the ack in the bme 32 */
+ udelay(5000);
+ out32(CFG_BME32_BASE + 0x0000000C, 0x00000001);
+ asm("eieio");
+
+
+ return (0);
+}
+
+
+/*************************************************************************
+ * misc_init_f
+ *
+ * Initialize I2C bus one to gain access to the fans
+ *
+ ************************************************************************/
+int misc_init_f (void)
+{
+ /* Turn on i2c bus 1 */
+ puts ("I2C1: ");
+ i2c1_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+ puts ("ready\n");
+
+ /* Turn on fans 3 & 4 */
+ sbcommon_fans();
+
+ return (0);
+}
+/*************************************************************************
+ * misc_init_r
+ *
+ * Do nothing.
+ *
+ ************************************************************************/
+int misc_init_r (void)
+{
+ unsigned short sernum;
+ char envstr[255];
+ KAREF_FPGA_REGS_ST *karef_ps;
+ OFEM_FPGA_REGS_ST *ofem_ps;
+ unsigned char ofem_id;
+
+ if(NULL != getenv("secondserial")) {
+ puts("secondserial is set, switching to second serial port\n");
+ setenv("stderr", "serial1");
+ setenv("stdout", "serial1");
+ setenv("stdin", "serial1");
+ }
+
+ setenv("ubrelver", KAREF_U_BOOT_REL_STR);
+
+ memset(envstr, 0, 255);
+ sprintf (envstr, "Built %s %s by %s", __DATE__, __TIME__, BUILDUSER);
+ setenv("bldstr", envstr);
+ saveenv();
+
+ if( getenv("autorecover")) {
+ setenv("autorecover", NULL);
+ saveenv();
+ sernum = sbcommon_get_serial_number();
+
+ printf("\nSetting up environment for automatic filesystem recovery\n");
+ /*
+ * Setup default bootargs
+ */
+ memset(envstr, 0, 255);
+
+ sprintf(envstr, "console=ttyS0,9600 root=/dev/ram0 "
+ "rw ip=10.100.70.%d:::255.255.0.0:karef%d:eth0:none idebus=33",
+ sernum, sernum);
+ setenv("bootargs", envstr);
+
+ /*
+ * Setup Default boot command
+ */
+ setenv("bootcmd", "fatload ide 0 8000000 uimage.karef;"
+ "fatload ide 0 8100000 pramdisk;"
+ "bootm 8000000 8100000");
+
+ printf("Done. Please type allow the system to continue to boot\n");
+ }
+
+ if( getenv("fakeled")) {
+ karef_ps = (KAREF_FPGA_REGS_ST *)CFG_KAREF_FPGA_BASE;
+ ofem_ps = (OFEM_FPGA_REGS_ST *)CFG_OFEM_FPGA_BASE;
+ ofem_ps->control_ul &= ~SAND_HAL_KA_SC_SCAN_CNTL_FAULT_LED_MASK;
+ karef_ps->control_ul &= ~SAND_HAL_KA_OF_OFEM_CNTL_FAULT_LED_MASK;
+ setenv("bootdelay", "-1");
+ saveenv();
+ printf("fakeled is set. use 'setenv fakeled ; setenv bootdelay 5 ; saveenv' to recover\n");
+ }
+
+
+
+
+ return (0);
+}
+
+
+
+
+/*************************************************************************
+ * ide_set_reset
+ *
+ *
+ *
+ ************************************************************************/
+#ifdef CONFIG_IDE_RESET
+void ide_set_reset(int on)
+{
+ KAREF_FPGA_REGS_ST *karef_ps;
+ /* TODO: ide reset */
+ karef_ps = (KAREF_FPGA_REGS_ST *)CFG_KAREF_FPGA_BASE;
+
+ if (on) {
+ karef_ps->reset_ul &= ~SAND_HAL_KA_SC_SCAN_RESET_CF_RESET_N_MASK;
+ } else {
+ karef_ps->reset_ul |= SAND_HAL_KA_SC_SCAN_RESET_CF_RESET_N_MASK;
+ }
+}
+#endif /* CONFIG_IDE_RESET */
+
+/*************************************************************************
+ * fpga_init
+ *
+ *
+ *
+ ************************************************************************/
+void fpga_init(void)
+{
+ KAREF_FPGA_REGS_ST *karef_ps;
+ OFEM_FPGA_REGS_ST *ofem_ps;
+ unsigned char ofem_id;
+ unsigned long tmp;
+
+ /* Ensure we have power all around */
+ udelay(500);
+
+ karef_ps = (KAREF_FPGA_REGS_ST *)CFG_KAREF_FPGA_BASE;
+ tmp =
+ SAND_HAL_KA_SC_SCAN_RESET_CF_RESET_N_MASK |
+ SAND_HAL_KA_SC_SCAN_RESET_BME_RESET_N_MASK |
+ SAND_HAL_KA_SC_SCAN_RESET_KA_RESET_N_MASK |
+ SAND_HAL_KA_SC_SCAN_RESET_SLAVE_RESET_N_MASK |
+ SAND_HAL_KA_SC_SCAN_RESET_OFEM_RESET_N_MASK |
+ SAND_HAL_KA_SC_SCAN_RESET_IFE_A_RESET_N_MASK |
+ SAND_HAL_KA_SC_SCAN_RESET_I2C_MUX1_RESET_N_MASK |
+ SAND_HAL_KA_SC_SCAN_RESET_PHY0_RESET_N_MASK |
+ SAND_HAL_KA_SC_SCAN_RESET_PHY1_RESET_N_MASK;
+
+ karef_ps->reset_ul = tmp;
+
+ /*
+ * Wait a bit to allow the ofem fpga to get its brains
+ */
+ udelay(5000);
+
+ /*
+ * Check to see if the ofem is there
+ */
+ ofem_id = (unsigned char)((karef_ps->boardinfo_ul & SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_ID_MASK)
+ >> SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_ID_SHIFT);
+ if(0xF != ofem_id) {
+ tmp =
+ SAND_HAL_KA_OF_OFEM_RESET_I2C_MUX0_RESET_N_MASK |
+ SAND_HAL_KA_OF_OFEM_RESET_LOCH0_RESET_N_MASK |
+ SAND_HAL_KA_OF_OFEM_RESET_MAC0_RESET_N_MASK;
+
+ ofem_ps = (OFEM_FPGA_REGS_ST *)CFG_OFEM_FPGA_BASE;
+ ofem_ps->reset_ul = tmp;
+
+ ofem_ps->control_ul |= 1 < SAND_HAL_KA_OF_OFEM_CNTL_FAULT_LED_SHIFT;
+ }
+
+ karef_ps->control_ul |= 1 << SAND_HAL_KA_SC_SCAN_CNTL_FAULT_LED_SHIFT;
+
+ asm("eieio");
+
+ return;
+}
+
+
+
+int karefSetupVars(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ unsigned short sernum;
+ char envstr[255];
+
+ sernum = sbcommon_get_serial_number();
+
+ memset(envstr, 0, 255);
+ /*
+ * Setup our ip address
+ */
+ sprintf(envstr, "10.100.70.%d", sernum);
+
+ setenv("ipaddr", envstr);
+ /*
+ * Setup the host ip address
+ */
+ setenv("serverip", "10.100.17.10");
+
+ /*
+ * Setup default bootargs
+ */
+ memset(envstr, 0, 255);
+
+ sprintf(envstr, "console=ttyS0,9600 root=/dev/nfs "
+ "rw nfsroot=10.100.17.10:/home/metrobox/mbc70.%d "
+ "nfsaddrs=10.100.70.%d:10.100.17.10:10.100.1.1:"
+ "255.255.0.0:karef%d.sandburst.com:eth0:none idebus=33",
+ sernum, sernum, sernum);
+
+ setenv("bootargs_nfs", envstr);
+ setenv("bootargs", envstr);
+
+ /*
+ * Setup CF bootargs
+ */
+ memset(envstr, 0, 255);
+
+ sprintf(envstr, "console=ttyS0,9600 root=/dev/hda2 "
+ "rw ip=10.100.70.%d:::255.255.0.0:karef%d:eth0:none idebus=33",
+ sernum, sernum);
+
+ setenv("bootargs_cf", envstr);
+
+ /*
+ * Setup Default boot command
+ */
+ setenv("bootcmd_tftp", "tftp 8000000 uImage.karef;bootm 8000000");
+ setenv("bootcmd", "tftp 8000000 uImage.karef;bootm 8000000");
+
+ /*
+ * Setup compact flash boot command
+ */
+ setenv("bootcmd_cf", "fatload ide 0 8000000 uimage.karef;bootm 8000000");
+
+ saveenv();
+
+ return(1);
+}
+
+
+int karefRecover(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ unsigned short sernum;
+ char envstr[255];
+
+ sernum = sbcommon_get_serial_number();
+
+ printf("\nSetting up environment for filesystem recovery\n");
+ /*
+ * Setup default bootargs
+ */
+ memset(envstr, 0, 255);
+
+ sprintf(envstr, "console=ttyS0,9600 root=/dev/ram0 "
+ "rw ip=10.100.70.%d:::255.255.0.0:karef%d:eth0:none",
+ sernum, sernum);
+ setenv("bootargs", envstr);
+
+ /*
+ * Setup Default boot command
+ */
+
+ setenv("bootcmd", "fatload ide 0 8000000 uimage.karef;"
+ "fatload ide 0 8100000 pramdisk;"
+ "bootm 8000000 8100000");
+
+ printf("Done. Please type boot<cr>.\nWhen the kernel has booted"
+ " please type fsrecover.sh<cr>\n");
+
+ return(1);
+}
+
+
+
+
+
+
+
+U_BOOT_CMD(kasetup, 1, 1, karefSetupVars,
+ "kasetup - Set environment to factory defaults\n", NULL);
+
+U_BOOT_CMD(karecover, 1, 1, karefRecover,
+ "karecover - Set environment to allow for fs recovery\n", NULL);
+
diff --git a/board/sandburst/karef/karef.h b/board/sandburst/karef/karef.h
new file mode 100644
index 0000000..7790819
--- /dev/null
+++ b/board/sandburst/karef/karef.h
@@ -0,0 +1,76 @@
+#ifndef __KAREF_H__
+#define __KAREF_H__
+/*
+ * (C) Copyright 2005
+ * Sandburst Corporation
+ * Travis B. Sawyer
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* Ka Reference Design OFEM FPGA Registers & definitions */
+#include "hal_ka_sc_auto.h"
+#include "hal_ka_of_auto.h"
+
+typedef struct karef_board_id_s {
+ const char name[40];
+} KAREF_BOARD_ID_ST, *KAREF_BOARD_ID_PST;
+
+/* SCAN FPGA */
+typedef struct karef_fpga_regs_s
+{
+ volatile unsigned long revision_ul; /* Read Only */
+ volatile unsigned long reset_ul; /* Read/Write */
+ volatile unsigned long interrupt_ul; /* Read Only */
+ volatile unsigned long mask_ul; /* Read/Write */
+ volatile unsigned long scratch_ul; /* Read/Write */
+ volatile unsigned long scrmask_ul; /* Read/Write */
+ volatile unsigned long status_ul; /* Read Only */
+ volatile unsigned long control_ul; /* Read/Write */
+ volatile unsigned long boardinfo_ul; /* Read Only */
+ volatile unsigned long scan_from0_ul; /* Read Only */
+ volatile unsigned long scan_from1_ul; /* Read Only */
+ volatile unsigned long scan_to0_ul; /* Read/Write */
+ volatile unsigned long scan_to1_ul; /* Read/Write */
+ volatile unsigned long scan_control_ul; /* Read/Write */
+ volatile unsigned long pll_control_ul; /* Read/Write */
+ volatile unsigned long core_clock_cnt_ul; /* Read/Write */
+ volatile unsigned long dr_clock_cnt_ul; /* Read/Write */
+ volatile unsigned long spi_clock_cnt_ul; /* Read/Write */
+ volatile unsigned long brdout_data_ul; /* Read/Write */
+ volatile unsigned long brdout_enable_ul; /* Read/Write */
+ volatile unsigned long brdin_data_ul; /* Read Only */
+ volatile unsigned long misc_ul; /* Read/Write */
+} KAREF_FPGA_REGS_ST __attribute__((packed)), * KAREF_FPGA_REGS_PST;
+
+/* OFEM FPGA */
+typedef struct ofem_fpga_regs_s
+{
+ volatile unsigned long revision_ul; /* Read Only */
+ volatile unsigned long reset_ul; /* Read/Write */
+ volatile unsigned long interrupt_ul; /* Read Only */
+ volatile unsigned long mask_ul; /* Read/Write */
+ volatile unsigned long scratch_ul; /* Read/Write */
+ volatile unsigned long scrmask_ul; /* Read/Write */
+ volatile unsigned long control_ul; /* Read/Write */
+ volatile unsigned long mac_flow_ctrl_ul; /* Read/Write */
+} OFEM_FPGA_REGS_ST __attribute__((packed)), * OFEM_FPGA_REGS_PST;
+
+
+#endif /* __KAREF_H__ */
diff --git a/board/sandburst/karef/karef_version.h b/board/sandburst/karef/karef_version.h
new file mode 100644
index 0000000..9960b9a
--- /dev/null
+++ b/board/sandburst/karef/karef_version.h
@@ -0,0 +1,26 @@
+#ifndef _KAREF_VERSION_H_
+#define _KAREF_VERSION_H_
+/*
+ * Copyright (C) 2005 Sandburst Corporation
+ * Travis B. Sawyer
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#define KAREF_U_BOOT_REL_STR "Release 0.0.7"
+#endif
diff --git a/board/sandburst/karef/u-boot.lds b/board/sandburst/karef/u-boot.lds
new file mode 100644
index 0000000..ff8658f
--- /dev/null
+++ b/board/sandburst/karef/u-boot.lds
@@ -0,0 +1,156 @@
+/*
+ * (C) Copyright 2005
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ * Travis B. Sawyer, Sandburst Corporation, tsawyer@sandburst.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ .resetvec 0xFFFFFFFC :
+ {
+ *(.resetvec)
+ } = 0xffff
+
+ .bootpg 0xFFFFF000 :
+ {
+ cpu/ppc4xx/start.o (.bootpg)
+ } = 0xffff
+
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ /* WARNING - the following is hand-optimized to fit within */
+ /* the sector layout of our flash chips! XXX FIXME XXX */
+
+ cpu/ppc4xx/start.o (.text)
+ board/sandburst/karef/init.o (.text)
+ cpu/ppc4xx/kgdb.o (.text)
+ cpu/ppc4xx/traps.o (.text)
+ cpu/ppc4xx/interrupts.o (.text)
+ cpu/ppc4xx/serial.o (.text)
+ cpu/ppc4xx/cpu_init.o (.text)
+ cpu/ppc4xx/speed.o (.text)
+ cpu/ppc4xx/440gx_enet.o (.text)
+ common/dlmalloc.o (.text)
+ lib_generic/crc32.o (.text)
+ lib_ppc/extable.o (.text)
+ lib_generic/zlib.o (.text)
+
+/* . = env_offset;*/
+/* common/environment.o(.text)*/
+
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.rodata)
+ *(.rodata1)
+ *(.rodata.str1.4)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x00FF) & 0xFFFFFF00;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+ __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(256);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
diff --git a/board/sandburst/karef/u-boot.lds.debug b/board/sandburst/karef/u-boot.lds.debug
new file mode 100644
index 0000000..c6522b9
--- /dev/null
+++ b/board/sandburst/karef/u-boot.lds.debug
@@ -0,0 +1,145 @@
+/*
+ * (C) Copyright 2002-2005
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ * Travis B. Sawyer, Sandburst Corporation, tsawyer@sandburst.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ /* WARNING - the following is hand-optimized to fit within */
+ /* the sector layout of our flash chips! XXX FIXME XXX */
+
+ cpu/ppc4xx/start.o (.text)
+ board/sandburst/karef/init.o (.text)
+ cpu/ppc4xx/kgdb.o (.text)
+ cpu/ppc4xx/traps.o (.text)
+ cpu/ppc4xx/interrupts.o (.text)
+ cpu/ppc4xx/serial.o (.text)
+ cpu/ppc4xx/cpu_init.o (.text)
+ cpu/ppc4xx/speed.o (.text)
+ cpu/ppc4xx/440gx_enet.o (.text)
+ common/dlmalloc.o (.text)
+ lib_generic/crc32.o (.text)
+ lib_ppc/extable.o (.text)
+ lib_generic/zlib.o (.text)
+
+/* common/environment.o(.text) */
+
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.rodata)
+ *(.rodata1)
+ *(.rodata.str1.4)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x0FFF) & 0xFFFFF000;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+ __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(256);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
diff --git a/board/sandburst/metrobox/Makefile b/board/sandburst/metrobox/Makefile
new file mode 100644
index 0000000..06a9a22
--- /dev/null
+++ b/board/sandburst/metrobox/Makefile
@@ -0,0 +1,57 @@
+#
+# (C) Copyright 2005
+# Travis B. Sawyer, Sandburst Corporation, tsawyer@sandburst.com
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+# TBS: add for debugging purposes
+BUILDUSER := $(shell whoami)
+FORCEBUILD := $(shell rm -f $(LIB) $(BOARD).o)
+
+CFLAGS += -DBUILDUSER='"$(BUILDUSER)"'
+# TBS: end debugging
+
+
+LIB = lib$(BOARD).a
+
+OBJS = $(BOARD).o ../common/flash.o ../common/ppc440gx_i2c.o \
+ ../common/sb_common.o
+SOBJS = init.o
+
+
+$(LIB): $(OBJS) $(SOBJS)
+ $(AR) crv $@ $(OBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend *~
+
+#########################################################################
+
+.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+ $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
diff --git a/board/sandburst/metrobox/config.mk b/board/sandburst/metrobox/config.mk
new file mode 100644
index 0000000..91aee2f
--- /dev/null
+++ b/board/sandburst/metrobox/config.mk
@@ -0,0 +1,38 @@
+#
+# (C) Copyright 2005
+# Travis B. Sawyer, Sandburst Corporation, tsawyer@sandburst.com
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+ifeq ($(ramsym),1)
+TEXT_BASE = 0x07FD0000
+else
+TEXT_BASE = 0xFFF80000
+endif
+
+PLATFORM_CPPFLAGS += -DCONFIG_440=1
+
+ifeq ($(debug),1)
+PLATFORM_CPPFLAGS += -DDEBUG
+endif
+
+ifeq ($(dbcr),1)
+PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
+endif
diff --git a/board/sandburst/metrobox/hal_xc_auto.h b/board/sandburst/metrobox/hal_xc_auto.h
new file mode 100644
index 0000000..c99b38c
--- /dev/null
+++ b/board/sandburst/metrobox/hal_xc_auto.h
@@ -0,0 +1,553 @@
+/* ****************************************************************
+ * Common defs for reg spec for chip xc
+ * Auto-generated by trex2: DO NOT HAND-EDIT!!
+ * ****************************************************************
+ */
+
+#ifndef HAL_XC_AUTO_H
+#define HAL_XC_AUTO_H
+
+/* ----------------------------------------------------------------
+ * For block: 'xcvr_cntl'
+ */
+
+/* ---- Block instance addressing (for block-select) */
+#define XCVR_CNTL_BLOCK_ADDR_BIT_L 6
+#define XCVR_CNTL_BLOCK_ADDR_BIT_H 9
+#define XCVR_CNTL_BLOCK_ADDR_WIDTH 4
+
+#define XCVR_CNTL_ADDR 0x0
+
+/* ---- Reg addressing (within block) */
+#define XCVR_CNTL_REG_ADDR_BIT_L 2
+#define XCVR_CNTL_REG_ADDR_BIT_H 5
+#define XCVR_CNTL_REG_ADDR_WIDTH 4
+
+
+/* ================================================================
+ * ---- Register XC_XCVR_CNTL_REVISION */
+#define SAND_HAL_XC_XCVR_CNTL_REVISION_OFFSET 0x000
+#ifndef SAND_HAL_XC_XCVR_CNTL_REVISION_NO_TEST_MASK
+#define SAND_HAL_XC_XCVR_CNTL_REVISION_NO_TEST_MASK 0x000
+#endif
+#define SAND_HAL_XC_XCVR_CNTL_REVISION_MASK 0xffffffff
+#define SAND_HAL_XC_XCVR_CNTL_REVISION_MSB 31
+#define SAND_HAL_XC_XCVR_CNTL_REVISION_LSB 0
+
+/* ================================================================
+ * ---- Register XC_XCVR_CNTL_RESET */
+#define SAND_HAL_XC_XCVR_CNTL_RESET_OFFSET 0x004
+#ifndef SAND_HAL_XC_XCVR_CNTL_RESET_NO_TEST_MASK
+#define SAND_HAL_XC_XCVR_CNTL_RESET_NO_TEST_MASK 0x000
+#endif
+#define SAND_HAL_XC_XCVR_CNTL_RESET_MASK 0xffffffff
+#define SAND_HAL_XC_XCVR_CNTL_RESET_MSB 31
+#define SAND_HAL_XC_XCVR_CNTL_RESET_LSB 0
+
+/* ================================================================
+ * ---- Register XC_XCVR_CNTL_STATUS */
+#define SAND_HAL_XC_XCVR_CNTL_STATUS_OFFSET 0x008
+#ifndef SAND_HAL_XC_XCVR_CNTL_STATUS_NO_TEST_MASK
+#define SAND_HAL_XC_XCVR_CNTL_STATUS_NO_TEST_MASK 0x000
+#endif
+#define SAND_HAL_XC_XCVR_CNTL_STATUS_MASK 0xffffffff
+#define SAND_HAL_XC_XCVR_CNTL_STATUS_MSB 31
+#define SAND_HAL_XC_XCVR_CNTL_STATUS_LSB 0
+
+/* ================================================================
+ * ---- Register XC_XCVR_CNTL_CNTL */
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_OFFSET 0x01c
+#ifndef SAND_HAL_XC_XCVR_CNTL_CNTL_NO_TEST_MASK
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_NO_TEST_MASK 0x000
+#endif
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_MASK 0xffffffff
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_MSB 31
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_LSB 0
+
+/* ================================================================
+ * ---- Register XC_XCVR_CNTL_BRD_INFO */
+#define SAND_HAL_XC_XCVR_CNTL_BRD_INFO_OFFSET 0x020
+#ifndef SAND_HAL_XC_XCVR_CNTL_BRD_INFO_NO_TEST_MASK
+#define SAND_HAL_XC_XCVR_CNTL_BRD_INFO_NO_TEST_MASK 0x000
+#endif
+#define SAND_HAL_XC_XCVR_CNTL_BRD_INFO_MASK 0xffffffff
+#define SAND_HAL_XC_XCVR_CNTL_BRD_INFO_MSB 31
+#define SAND_HAL_XC_XCVR_CNTL_BRD_INFO_LSB 0
+
+/* ================================================================
+ * ---- Register XC_XCVR_CNTL_MAC_FLOW_CTL */
+#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_OFFSET 0x024
+#ifndef SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_NO_TEST_MASK
+#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_NO_TEST_MASK 0x000
+#endif
+#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MASK 0xffffffff
+#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MSB 31
+#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_LSB 0
+
+/* ================================================================
+ * ---- Register XC_XCVR_CNTL_INTERRUPT */
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_OFFSET 0x00c
+#ifndef SAND_HAL_XC_XCVR_CNTL_INTERRUPT_NO_TEST_MASK
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_NO_TEST_MASK 0x000
+#endif
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK 0xffffffff
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MSB 31
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_LSB 0
+
+/* ================================================================
+ * ---- Register XC_XCVR_CNTL_INTERRUPT_MASK */
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_OFFSET 0x010
+#ifndef SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_NO_TEST_MASK
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_NO_TEST_MASK 0x000
+#endif
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MASK 0xffffffff
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MSB 31
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_LSB 0
+
+/* ================================================================
+ * ---- Register XC_XCVR_CNTL_SCRATCH */
+#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_OFFSET 0x014
+#ifndef SAND_HAL_XC_XCVR_CNTL_SCRATCH_NO_TEST_MASK
+#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_NO_TEST_MASK 0x000
+#endif
+#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_MASK 0xffffffff
+#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_MSB 31
+#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_LSB 0
+
+/* ================================================================
+ * ---- Register XC_XCVR_CNTL_SCRATCH_MASK */
+#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_MASK_OFFSET 0x018
+#ifndef SAND_HAL_XC_XCVR_CNTL_SCRATCH_MASK_NO_TEST_MASK
+#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_MASK_NO_TEST_MASK 0x000
+#endif
+#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_MASK_MASK 0xffffffff
+#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_MASK_MSB 31
+#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_MASK_LSB 0
+
+/* ================================================================
+ * Field info for register XC_XCVR_CNTL_REVISION */
+#define SAND_HAL_XC_XCVR_CNTL_REVISION_IDENTIFICATION_MASK 0x0000ff00
+#define SAND_HAL_XC_XCVR_CNTL_REVISION_IDENTIFICATION_SHIFT 8
+#define SAND_HAL_XC_XCVR_CNTL_REVISION_IDENTIFICATION_MSB 15
+#define SAND_HAL_XC_XCVR_CNTL_REVISION_IDENTIFICATION_LSB 8
+#define SAND_HAL_XC_XCVR_CNTL_REVISION_IDENTIFICATION_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_XC_XCVR_CNTL_REVISION_IDENTIFICATION_DEFAULT 0x00000000
+#define SAND_HAL_XC_XCVR_CNTL_REVISION_REVISION_MASK 0x000000ff
+#define SAND_HAL_XC_XCVR_CNTL_REVISION_REVISION_SHIFT 0
+#define SAND_HAL_XC_XCVR_CNTL_REVISION_REVISION_MSB 7
+#define SAND_HAL_XC_XCVR_CNTL_REVISION_REVISION_LSB 0
+#define SAND_HAL_XC_XCVR_CNTL_REVISION_REVISION_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_XC_XCVR_CNTL_REVISION_REVISION_DEFAULT 0x00000000
+
+/* ================================================================
+ * Field info for register XC_XCVR_CNTL_RESET */
+#define SAND_HAL_XC_XCVR_CNTL_RESET_MAC1_RESET_N_MASK 0x00020000
+#define SAND_HAL_XC_XCVR_CNTL_RESET_MAC1_RESET_N_SHIFT 17
+#define SAND_HAL_XC_XCVR_CNTL_RESET_MAC1_RESET_N_MSB 17
+#define SAND_HAL_XC_XCVR_CNTL_RESET_MAC1_RESET_N_LSB 17
+#define SAND_HAL_XC_XCVR_CNTL_RESET_MAC1_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_RESET_MAC1_RESET_N_DEFAULT 0x00000000
+#define SAND_HAL_XC_XCVR_CNTL_RESET_MAC0_RESET_N_MASK 0x00010000
+#define SAND_HAL_XC_XCVR_CNTL_RESET_MAC0_RESET_N_SHIFT 16
+#define SAND_HAL_XC_XCVR_CNTL_RESET_MAC0_RESET_N_MSB 16
+#define SAND_HAL_XC_XCVR_CNTL_RESET_MAC0_RESET_N_LSB 16
+#define SAND_HAL_XC_XCVR_CNTL_RESET_MAC0_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_RESET_MAC0_RESET_N_DEFAULT 0x00000000
+#define SAND_HAL_XC_XCVR_CNTL_RESET_SLAVE_RESET_N_MASK 0x00008000
+#define SAND_HAL_XC_XCVR_CNTL_RESET_SLAVE_RESET_N_SHIFT 15
+#define SAND_HAL_XC_XCVR_CNTL_RESET_SLAVE_RESET_N_MSB 15
+#define SAND_HAL_XC_XCVR_CNTL_RESET_SLAVE_RESET_N_LSB 15
+#define SAND_HAL_XC_XCVR_CNTL_RESET_SLAVE_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_RESET_SLAVE_RESET_N_DEFAULT 0x00000000
+#define SAND_HAL_XC_XCVR_CNTL_RESET_BME_RESET_N_MASK 0x00004000
+#define SAND_HAL_XC_XCVR_CNTL_RESET_BME_RESET_N_SHIFT 14
+#define SAND_HAL_XC_XCVR_CNTL_RESET_BME_RESET_N_MSB 14
+#define SAND_HAL_XC_XCVR_CNTL_RESET_BME_RESET_N_LSB 14
+#define SAND_HAL_XC_XCVR_CNTL_RESET_BME_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_RESET_BME_RESET_N_DEFAULT 0x00000000
+#define SAND_HAL_XC_XCVR_CNTL_RESET_ACE_RESET_N_MASK 0x00002000
+#define SAND_HAL_XC_XCVR_CNTL_RESET_ACE_RESET_N_SHIFT 13
+#define SAND_HAL_XC_XCVR_CNTL_RESET_ACE_RESET_N_MSB 13
+#define SAND_HAL_XC_XCVR_CNTL_RESET_ACE_RESET_N_LSB 13
+#define SAND_HAL_XC_XCVR_CNTL_RESET_ACE_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_RESET_ACE_RESET_N_DEFAULT 0x00000000
+#define SAND_HAL_XC_XCVR_CNTL_RESET_CF_RESET_N_MASK 0x00001000
+#define SAND_HAL_XC_XCVR_CNTL_RESET_CF_RESET_N_SHIFT 12
+#define SAND_HAL_XC_XCVR_CNTL_RESET_CF_RESET_N_MSB 12
+#define SAND_HAL_XC_XCVR_CNTL_RESET_CF_RESET_N_LSB 12
+#define SAND_HAL_XC_XCVR_CNTL_RESET_CF_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_RESET_CF_RESET_N_DEFAULT 0x00000000
+#define SAND_HAL_XC_XCVR_CNTL_RESET_QE_A_RESET_N_MASK 0x00000800
+#define SAND_HAL_XC_XCVR_CNTL_RESET_QE_A_RESET_N_SHIFT 11
+#define SAND_HAL_XC_XCVR_CNTL_RESET_QE_A_RESET_N_MSB 11
+#define SAND_HAL_XC_XCVR_CNTL_RESET_QE_A_RESET_N_LSB 11
+#define SAND_HAL_XC_XCVR_CNTL_RESET_QE_A_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_RESET_QE_A_RESET_N_DEFAULT 0x00000000
+#define SAND_HAL_XC_XCVR_CNTL_RESET_IFE_A_RESET_N_MASK 0x00000400
+#define SAND_HAL_XC_XCVR_CNTL_RESET_IFE_A_RESET_N_SHIFT 10
+#define SAND_HAL_XC_XCVR_CNTL_RESET_IFE_A_RESET_N_MSB 10
+#define SAND_HAL_XC_XCVR_CNTL_RESET_IFE_A_RESET_N_LSB 10
+#define SAND_HAL_XC_XCVR_CNTL_RESET_IFE_A_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_RESET_IFE_A_RESET_N_DEFAULT 0x00000000
+#define SAND_HAL_XC_XCVR_CNTL_RESET_EFE_A_RESET_N_MASK 0x00000200
+#define SAND_HAL_XC_XCVR_CNTL_RESET_EFE_A_RESET_N_SHIFT 9
+#define SAND_HAL_XC_XCVR_CNTL_RESET_EFE_A_RESET_N_MSB 9
+#define SAND_HAL_XC_XCVR_CNTL_RESET_EFE_A_RESET_N_LSB 9
+#define SAND_HAL_XC_XCVR_CNTL_RESET_EFE_A_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_RESET_EFE_A_RESET_N_DEFAULT 0x00000000
+#define SAND_HAL_XC_XCVR_CNTL_RESET_QE_B_RESET_N_MASK 0x00000100
+#define SAND_HAL_XC_XCVR_CNTL_RESET_QE_B_RESET_N_SHIFT 8
+#define SAND_HAL_XC_XCVR_CNTL_RESET_QE_B_RESET_N_MSB 8
+#define SAND_HAL_XC_XCVR_CNTL_RESET_QE_B_RESET_N_LSB 8
+#define SAND_HAL_XC_XCVR_CNTL_RESET_QE_B_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_RESET_QE_B_RESET_N_DEFAULT 0x00000000
+#define SAND_HAL_XC_XCVR_CNTL_RESET_IFE_B_RESET_N_MASK 0x00000080
+#define SAND_HAL_XC_XCVR_CNTL_RESET_IFE_B_RESET_N_SHIFT 7
+#define SAND_HAL_XC_XCVR_CNTL_RESET_IFE_B_RESET_N_MSB 7
+#define SAND_HAL_XC_XCVR_CNTL_RESET_IFE_B_RESET_N_LSB 7
+#define SAND_HAL_XC_XCVR_CNTL_RESET_IFE_B_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_RESET_IFE_B_RESET_N_DEFAULT 0x00000000
+#define SAND_HAL_XC_XCVR_CNTL_RESET_EFE_B_RESET_N_MASK 0x00000040
+#define SAND_HAL_XC_XCVR_CNTL_RESET_EFE_B_RESET_N_SHIFT 6
+#define SAND_HAL_XC_XCVR_CNTL_RESET_EFE_B_RESET_N_MSB 6
+#define SAND_HAL_XC_XCVR_CNTL_RESET_EFE_B_RESET_N_LSB 6
+#define SAND_HAL_XC_XCVR_CNTL_RESET_EFE_B_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_RESET_EFE_B_RESET_N_DEFAULT 0x00000000
+#define SAND_HAL_XC_XCVR_CNTL_RESET_LOCK1_RESET_N_MASK 0x00000020
+#define SAND_HAL_XC_XCVR_CNTL_RESET_LOCK1_RESET_N_SHIFT 5
+#define SAND_HAL_XC_XCVR_CNTL_RESET_LOCK1_RESET_N_MSB 5
+#define SAND_HAL_XC_XCVR_CNTL_RESET_LOCK1_RESET_N_LSB 5
+#define SAND_HAL_XC_XCVR_CNTL_RESET_LOCK1_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_RESET_LOCK1_RESET_N_DEFAULT 0x00000000
+#define SAND_HAL_XC_XCVR_CNTL_RESET_LOCK0_RESET_N_MASK 0x00000010
+#define SAND_HAL_XC_XCVR_CNTL_RESET_LOCK0_RESET_N_SHIFT 4
+#define SAND_HAL_XC_XCVR_CNTL_RESET_LOCK0_RESET_N_MSB 4
+#define SAND_HAL_XC_XCVR_CNTL_RESET_LOCK0_RESET_N_LSB 4
+#define SAND_HAL_XC_XCVR_CNTL_RESET_LOCK0_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_RESET_LOCK0_RESET_N_DEFAULT 0x00000000
+#define SAND_HAL_XC_XCVR_CNTL_RESET_I2C_MUX1_RESET_N_MASK 0x00000008
+#define SAND_HAL_XC_XCVR_CNTL_RESET_I2C_MUX1_RESET_N_SHIFT 3
+#define SAND_HAL_XC_XCVR_CNTL_RESET_I2C_MUX1_RESET_N_MSB 3
+#define SAND_HAL_XC_XCVR_CNTL_RESET_I2C_MUX1_RESET_N_LSB 3
+#define SAND_HAL_XC_XCVR_CNTL_RESET_I2C_MUX1_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_RESET_I2C_MUX1_RESET_N_DEFAULT 0x00000000
+#define SAND_HAL_XC_XCVR_CNTL_RESET_I2C_MUX0_RESET_N_MASK 0x00000004
+#define SAND_HAL_XC_XCVR_CNTL_RESET_I2C_MUX0_RESET_N_SHIFT 2
+#define SAND_HAL_XC_XCVR_CNTL_RESET_I2C_MUX0_RESET_N_MSB 2
+#define SAND_HAL_XC_XCVR_CNTL_RESET_I2C_MUX0_RESET_N_LSB 2
+#define SAND_HAL_XC_XCVR_CNTL_RESET_I2C_MUX0_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_RESET_I2C_MUX0_RESET_N_DEFAULT 0x00000000
+#define SAND_HAL_XC_XCVR_CNTL_RESET_PHY0_RESET_N_MASK 0x00000002
+#define SAND_HAL_XC_XCVR_CNTL_RESET_PHY0_RESET_N_SHIFT 1
+#define SAND_HAL_XC_XCVR_CNTL_RESET_PHY0_RESET_N_MSB 1
+#define SAND_HAL_XC_XCVR_CNTL_RESET_PHY0_RESET_N_LSB 1
+#define SAND_HAL_XC_XCVR_CNTL_RESET_PHY0_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_RESET_PHY0_RESET_N_DEFAULT 0x00000000
+#define SAND_HAL_XC_XCVR_CNTL_RESET_PHY1_RESET_N_MASK 0x00000001
+#define SAND_HAL_XC_XCVR_CNTL_RESET_PHY1_RESET_N_SHIFT 0
+#define SAND_HAL_XC_XCVR_CNTL_RESET_PHY1_RESET_N_MSB 0
+#define SAND_HAL_XC_XCVR_CNTL_RESET_PHY1_RESET_N_LSB 0
+#define SAND_HAL_XC_XCVR_CNTL_RESET_PHY1_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_RESET_PHY1_RESET_N_DEFAULT 0x00000000
+
+/* ================================================================
+ * Field info for register XC_XCVR_CNTL_STATUS */
+#define SAND_HAL_XC_XCVR_CNTL_STATUS_PS_A_PRES_N_MASK 0x00000004
+#define SAND_HAL_XC_XCVR_CNTL_STATUS_PS_A_PRES_N_SHIFT 2
+#define SAND_HAL_XC_XCVR_CNTL_STATUS_PS_A_PRES_N_MSB 2
+#define SAND_HAL_XC_XCVR_CNTL_STATUS_PS_A_PRES_N_LSB 2
+#define SAND_HAL_XC_XCVR_CNTL_STATUS_PS_A_PRES_N_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_XC_XCVR_CNTL_STATUS_PS_A_PRES_N_DEFAULT 0x00000000
+#define SAND_HAL_XC_XCVR_CNTL_STATUS_PS_B_PRES_N_MASK 0x00000002
+#define SAND_HAL_XC_XCVR_CNTL_STATUS_PS_B_PRES_N_SHIFT 1
+#define SAND_HAL_XC_XCVR_CNTL_STATUS_PS_B_PRES_N_MSB 1
+#define SAND_HAL_XC_XCVR_CNTL_STATUS_PS_B_PRES_N_LSB 1
+#define SAND_HAL_XC_XCVR_CNTL_STATUS_PS_B_PRES_N_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_XC_XCVR_CNTL_STATUS_PS_B_PRES_N_DEFAULT 0x00000000
+#define SAND_HAL_XC_XCVR_CNTL_STATUS_ALL_GOOD_MASK 0x00000001
+#define SAND_HAL_XC_XCVR_CNTL_STATUS_ALL_GOOD_SHIFT 0
+#define SAND_HAL_XC_XCVR_CNTL_STATUS_ALL_GOOD_MSB 0
+#define SAND_HAL_XC_XCVR_CNTL_STATUS_ALL_GOOD_LSB 0
+#define SAND_HAL_XC_XCVR_CNTL_STATUS_ALL_GOOD_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_XC_XCVR_CNTL_STATUS_ALL_GOOD_DEFAULT 0x00000000
+
+/* ================================================================
+ * Field info for register XC_XCVR_CNTL_CNTL */
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_SW_PWR_DOWN_MASK 0x00000400
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_SW_PWR_DOWN_SHIFT 10
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_SW_PWR_DOWN_MSB 10
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_SW_PWR_DOWN_LSB 10
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_SW_PWR_DOWN_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_SW_PWR_DOWN_DEFAULT 0x00000000
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_OVER_TEMP_LED_MASK 0x00000300
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_OVER_TEMP_LED_SHIFT 8
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_OVER_TEMP_LED_MSB 9
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_OVER_TEMP_LED_LSB 8
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_OVER_TEMP_LED_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_OVER_TEMP_LED_DEFAULT 0x00000000
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_ERROR_LED_MASK 0x000000c0
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_ERROR_LED_SHIFT 6
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_ERROR_LED_MSB 7
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_ERROR_LED_LSB 6
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_ERROR_LED_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_ERROR_LED_DEFAULT 0x00000000
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_RS232_R_LED_MASK 0x00000030
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_RS232_R_LED_SHIFT 4
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_RS232_R_LED_MSB 5
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_RS232_R_LED_LSB 4
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_RS232_R_LED_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_RS232_R_LED_DEFAULT 0x00000000
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_RS232_L_LED_MASK 0x0000000c
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_RS232_L_LED_SHIFT 2
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_RS232_L_LED_MSB 3
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_RS232_L_LED_LSB 2
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_RS232_L_LED_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_RS232_L_LED_DEFAULT 0x00000000
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_CORE_CLK_50_EN_MASK 0x00000002
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_CORE_CLK_50_EN_SHIFT 1
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_CORE_CLK_50_EN_MSB 1
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_CORE_CLK_50_EN_LSB 1
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_CORE_CLK_50_EN_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_CORE_CLK_50_EN_DEFAULT 0x00000001
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_PCI_CLK_EN_MASK 0x00000001
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_PCI_CLK_EN_SHIFT 0
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_PCI_CLK_EN_MSB 0
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_PCI_CLK_EN_LSB 0
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_PCI_CLK_EN_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_PCI_CLK_EN_DEFAULT 0x00000001
+
+/* ================================================================
+ * Field info for register XC_XCVR_CNTL_BRD_INFO */
+#define SAND_HAL_XC_XCVR_CNTL_BRD_INFO_BRD_ID_MASK 0x000000f0
+#define SAND_HAL_XC_XCVR_CNTL_BRD_INFO_BRD_ID_SHIFT 4
+#define SAND_HAL_XC_XCVR_CNTL_BRD_INFO_BRD_ID_MSB 7
+#define SAND_HAL_XC_XCVR_CNTL_BRD_INFO_BRD_ID_LSB 4
+#define SAND_HAL_XC_XCVR_CNTL_BRD_INFO_BRD_ID_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_XC_XCVR_CNTL_BRD_INFO_BRD_ID_DEFAULT 0x00000000
+#define SAND_HAL_XC_XCVR_CNTL_BRD_INFO_BRD_REV_MASK 0x00000003
+#define SAND_HAL_XC_XCVR_CNTL_BRD_INFO_BRD_REV_SHIFT 0
+#define SAND_HAL_XC_XCVR_CNTL_BRD_INFO_BRD_REV_MSB 1
+#define SAND_HAL_XC_XCVR_CNTL_BRD_INFO_BRD_REV_LSB 0
+#define SAND_HAL_XC_XCVR_CNTL_BRD_INFO_BRD_REV_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_XC_XCVR_CNTL_BRD_INFO_BRD_REV_DEFAULT 0x00000000
+
+/* ================================================================
+ * Field info for register XC_XCVR_CNTL_MAC_FLOW_CTL */
+#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACB_TXPAUSE_FR_MASK 0x00001000
+#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACB_TXPAUSE_FR_SHIFT 12
+#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACB_TXPAUSE_FR_MSB 12
+#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACB_TXPAUSE_FR_LSB 12
+#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACB_TXPAUSE_FR_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACB_TXPAUSE_FR_DEFAULT 0x00000000
+#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACB_TXPAUSE_ADDR_MASK 0x00000f00
+#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACB_TXPAUSE_ADDR_SHIFT 8
+#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACB_TXPAUSE_ADDR_MSB 11
+#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACB_TXPAUSE_ADDR_LSB 8
+#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACB_TXPAUSE_ADDR_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACB_TXPAUSE_ADDR_DEFAULT 0x00000000
+#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACA_TXPAUSE_FR_MASK 0x00000010
+#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACA_TXPAUSE_FR_SHIFT 4
+#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACA_TXPAUSE_FR_MSB 4
+#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACA_TXPAUSE_FR_LSB 4
+#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACA_TXPAUSE_FR_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACA_TXPAUSE_FR_DEFAULT 0x00000000
+#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACA_TXPAUSE_ADDR_MASK 0x0000000f
+#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACA_TXPAUSE_ADDR_SHIFT 0
+#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACA_TXPAUSE_ADDR_MSB 3
+#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACA_TXPAUSE_ADDR_LSB 0
+#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACA_TXPAUSE_ADDR_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACA_TXPAUSE_ADDR_DEFAULT 0x00000000
+
+/* ================================================================
+ * Field info for register XC_XCVR_CNTL_INTERRUPT */
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_BME_TIMEOUT_MASK 0x00002000
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_BME_TIMEOUT_SHIFT 13
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_BME_TIMEOUT_MSB 13
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_BME_TIMEOUT_LSB 13
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_BME_TIMEOUT_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_BME_TIMEOUT_DEFAULT 0x00000000
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC_TIMEOUT_MASK 0x00001000
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC_TIMEOUT_SHIFT 12
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC_TIMEOUT_MSB 12
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC_TIMEOUT_LSB 12
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC_TIMEOUT_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC_TIMEOUT_DEFAULT 0x00000000
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_QK_A_LOSOUT_N_MASK 0x00000800
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_QK_A_LOSOUT_N_SHIFT 11
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_QK_A_LOSOUT_N_MSB 11
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_QK_A_LOSOUT_N_LSB 11
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_QK_A_LOSOUT_N_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_QK_A_LOSOUT_N_DEFAULT 0x00000000
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_QK_B_LOSOUT_N_MASK 0x00000400
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_QK_B_LOSOUT_N_SHIFT 10
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_QK_B_LOSOUT_N_MSB 10
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_QK_B_LOSOUT_N_LSB 10
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_QK_B_LOSOUT_N_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_QK_B_LOSOUT_N_DEFAULT 0x00000000
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_A_NR_MASK 0x00000200
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_A_NR_SHIFT 9
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_A_NR_MSB 9
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_A_NR_LSB 9
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_A_NR_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_A_NR_DEFAULT 0x00000000
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_B_NR_MASK 0x00000100
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_B_NR_SHIFT 8
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_B_NR_MSB 8
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_B_NR_LSB 8
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_B_NR_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_B_NR_DEFAULT 0x00000000
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_A_INT_N_MASK 0x00000080
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_A_INT_N_SHIFT 7
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_A_INT_N_MSB 7
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_A_INT_N_LSB 7
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_A_INT_N_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_A_INT_N_DEFAULT 0x00000000
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_B_INT_N_MASK 0x00000040
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_B_INT_N_SHIFT 6
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_B_INT_N_MSB 6
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_B_INT_N_LSB 6
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_B_INT_N_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_B_INT_N_DEFAULT 0x00000000
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_OVER_TEMP_A_MASK 0x00000020
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_OVER_TEMP_A_SHIFT 5
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_OVER_TEMP_A_MSB 5
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_OVER_TEMP_A_LSB 5
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_OVER_TEMP_A_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_OVER_TEMP_A_DEFAULT 0x00000000
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_OVER_TEMP_B_MASK 0x00000010
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_OVER_TEMP_B_SHIFT 4
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_OVER_TEMP_B_MSB 4
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_OVER_TEMP_B_LSB 4
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_OVER_TEMP_B_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_OVER_TEMP_B_DEFAULT 0x00000000
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_POWER_FAIL_A_MASK 0x00000008
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_POWER_FAIL_A_SHIFT 3
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_POWER_FAIL_A_MSB 3
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_POWER_FAIL_A_LSB 3
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_POWER_FAIL_A_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_POWER_FAIL_A_DEFAULT 0x00000000
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_POWER_FAIL_B_MASK 0x00000004
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_POWER_FAIL_B_SHIFT 2
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_POWER_FAIL_B_MSB 2
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_POWER_FAIL_B_LSB 2
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_POWER_FAIL_B_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_POWER_FAIL_B_DEFAULT 0x00000000
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC1_INT_N_MASK 0x00000002
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC1_INT_N_SHIFT 1
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC1_INT_N_MSB 1
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC1_INT_N_LSB 1
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC1_INT_N_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC1_INT_N_DEFAULT 0x00000000
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC0_INT_N_MASK 0x00000001
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC0_INT_N_SHIFT 0
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC0_INT_N_MSB 0
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC0_INT_N_LSB 0
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC0_INT_N_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC0_INT_N_DEFAULT 0x00000000
+
+/* ================================================================
+ * Field info for register XC_XCVR_CNTL_INTERRUPT_MASK */
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_BME_TIMEOUT_DISINT_MASK 0x00002000
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_BME_TIMEOUT_DISINT_SHIFT 13
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_BME_TIMEOUT_DISINT_MSB 13
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_BME_TIMEOUT_DISINT_LSB 13
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_BME_TIMEOUT_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_BME_TIMEOUT_DISINT_DEFAULT 0x00000001
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC_TIMEOUT_DISINT_MASK 0x00001000
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC_TIMEOUT_DISINT_SHIFT 12
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC_TIMEOUT_DISINT_MSB 12
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC_TIMEOUT_DISINT_LSB 12
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC_TIMEOUT_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC_TIMEOUT_DISINT_DEFAULT 0x00000001
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_QK_A_LOSOUT_N_DISINT_MASK 0x00000800
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_QK_A_LOSOUT_N_DISINT_SHIFT 11
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_QK_A_LOSOUT_N_DISINT_MSB 11
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_QK_A_LOSOUT_N_DISINT_LSB 11
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_QK_A_LOSOUT_N_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_QK_A_LOSOUT_N_DISINT_DEFAULT 0x00000001
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_QK_B_LOSOUT_N_DISINT_MASK 0x00000400
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_QK_B_LOSOUT_N_DISINT_SHIFT 10
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_QK_B_LOSOUT_N_DISINT_MSB 10
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_QK_B_LOSOUT_N_DISINT_LSB 10
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_QK_B_LOSOUT_N_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_QK_B_LOSOUT_N_DISINT_DEFAULT 0x00000001
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_A_NR_DISINT_MASK 0x00000200
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_A_NR_DISINT_SHIFT 9
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_A_NR_DISINT_MSB 9
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_A_NR_DISINT_LSB 9
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_A_NR_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_A_NR_DISINT_DEFAULT 0x00000001
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_B_NR_DISINT_MASK 0x00000100
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_B_NR_DISINT_SHIFT 8
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_B_NR_DISINT_MSB 8
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_B_NR_DISINT_LSB 8
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_B_NR_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_B_NR_DISINT_DEFAULT 0x00000001
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_A_INT_N_DISINT_MASK 0x00000080
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_A_INT_N_DISINT_SHIFT 7
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_A_INT_N_DISINT_MSB 7
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_A_INT_N_DISINT_LSB 7
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_A_INT_N_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_A_INT_N_DISINT_DEFAULT 0x00000001
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_B_INT_N_DISINT_MASK 0x00000040
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_B_INT_N_DISINT_SHIFT 6
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_B_INT_N_DISINT_MSB 6
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_B_INT_N_DISINT_LSB 6
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_B_INT_N_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_B_INT_N_DISINT_DEFAULT 0x00000001
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_OVER_TEMP_A_DISINT_MASK 0x00000020
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_OVER_TEMP_A_DISINT_SHIFT 5
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_OVER_TEMP_A_DISINT_MSB 5
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_OVER_TEMP_A_DISINT_LSB 5
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_OVER_TEMP_A_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_OVER_TEMP_A_DISINT_DEFAULT 0x00000001
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_OVER_TEMP_B_DISINT_MASK 0x00000010
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_OVER_TEMP_B_DISINT_SHIFT 4
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_OVER_TEMP_B_DISINT_MSB 4
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_OVER_TEMP_B_DISINT_LSB 4
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_OVER_TEMP_B_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_OVER_TEMP_B_DISINT_DEFAULT 0x00000001
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_POWER_FAIL_A_DISINT_MASK 0x00000008
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_POWER_FAIL_A_DISINT_SHIFT 3
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_POWER_FAIL_A_DISINT_MSB 3
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_POWER_FAIL_A_DISINT_LSB 3
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_POWER_FAIL_A_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_POWER_FAIL_A_DISINT_DEFAULT 0x00000001
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_POWER_FAIL_B_DISINT_MASK 0x00000004
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_POWER_FAIL_B_DISINT_SHIFT 2
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_POWER_FAIL_B_DISINT_MSB 2
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_POWER_FAIL_B_DISINT_LSB 2
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_POWER_FAIL_B_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_POWER_FAIL_B_DISINT_DEFAULT 0x00000001
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC1_INT_N_DISINT_MASK 0x00000002
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC1_INT_N_DISINT_SHIFT 1
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC1_INT_N_DISINT_MSB 1
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC1_INT_N_DISINT_LSB 1
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC1_INT_N_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC1_INT_N_DISINT_DEFAULT 0x00000001
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC0_INT_N_DISINT_MASK 0x00000001
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC0_INT_N_DISINT_SHIFT 0
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC0_INT_N_DISINT_MSB 0
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC0_INT_N_DISINT_LSB 0
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC0_INT_N_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC0_INT_N_DISINT_DEFAULT 0x00000001
+
+/* ================================================================
+ * Field info for register XC_XCVR_CNTL_SCRATCH */
+#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_TEST_BITS_MASK 0xffffffff
+#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_TEST_BITS_SHIFT 0
+#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_TEST_BITS_MSB 31
+#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_TEST_BITS_LSB 0
+#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_TEST_BITS_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_TEST_BITS_DEFAULT 0x00000000
+
+/* ================================================================
+ * Field info for register XC_XCVR_CNTL_SCRATCH_MASK */
+#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_MASK_TEST_BITS_DISINT_MASK 0xffffffff
+#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_MASK_TEST_BITS_DISINT_SHIFT 0
+#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_MASK_TEST_BITS_DISINT_MSB 31
+#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_MASK_TEST_BITS_DISINT_LSB 0
+#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_MASK_TEST_BITS_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_MASK_TEST_BITS_DISINT_DEFAULT 0xffffffff
+
+#endif /* matches #ifndef HAL_XC_AUTO_H */
diff --git a/board/sandburst/metrobox/init.S b/board/sandburst/metrobox/init.S
new file mode 100644
index 0000000..e398f00
--- /dev/null
+++ b/board/sandburst/metrobox/init.S
@@ -0,0 +1,99 @@
+/*
+* Copyright (C) 2005
+* Travis B. Sawyer, Sandburst Corporation, tsawyer@sandburst.com
+*
+* See file CREDITS for list of people who contributed to this
+* project.
+*
+* This program is free software; you can redistribute it and/or
+* modify it under the terms of the GNU General Public License as
+* published by the Free Software Foundation; either version 2 of
+* the License, or (at your option) any later version.
+*
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with this program; if not, write to the Free Software
+* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+* MA 02111-1307 USA
+*/
+
+#include <ppc_asm.tmpl>
+#include <config.h>
+
+/* General */
+#define TLB_VALID 0x00000200
+
+/* Supported page sizes */
+
+#define SZ_1K 0x00000000
+#define SZ_4K 0x00000010
+#define SZ_16K 0x00000020
+#define SZ_64K 0x00000030
+#define SZ_256K 0x00000040
+#define SZ_1M 0x00000050
+#define SZ_16M 0x00000070
+#define SZ_256M 0x00000090
+
+/* Storage attributes */
+#define SA_W 0x00000800 /* Write-through */
+#define SA_I 0x00000400 /* Caching inhibited */
+#define SA_M 0x00000200 /* Memory coherence */
+#define SA_G 0x00000100 /* Guarded */
+#define SA_E 0x00000080 /* Endian */
+
+/* Access control */
+#define AC_X 0x00000024 /* Execute */
+#define AC_W 0x00000012 /* Write */
+#define AC_R 0x00000009 /* Read */
+
+/* Some handy macros */
+
+#define EPN(e) ((e) & 0xfffffc00)
+#define TLB0(epn,sz) ( (EPN((epn)) | (sz) | TLB_VALID ) )
+#define TLB1(rpn,erpn) ( ((rpn)&0xfffffc00) | (erpn) )
+#define TLB2(a) ( (a)&0x00000fbf )
+
+#define tlbtab_start\
+ mflr r1 ;\
+ bl 0f ;
+
+#define tlbtab_end\
+ .long 0, 0, 0 ; \
+0: mflr r0 ; \
+ mtlr r1 ; \
+ blr ;
+
+#define tlbentry(epn,sz,rpn,erpn,attr)\
+ .long TLB0(epn,sz),TLB1(rpn,erpn),TLB2(attr)
+
+
+/**************************************************************************
+ * TLB TABLE
+ *
+ * This table is used by the cpu boot code to setup the initial tlb
+ * entries. Rather than make broad assumptions in the cpu source tree,
+ * this table lets each board set things up however they like.
+ *
+ * Pointer to the table is returned in r1
+ *
+ *************************************************************************/
+
+ .section .bootpg,"ax"
+ .globl tlbtab
+
+tlbtab:
+ tlbtab_start
+ tlbentry( 0xf0000000, SZ_256M, 0xf0000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I)
+ tlbentry( CFG_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_R|AC_W|SA_G|SA_I)
+ tlbentry( CFG_ISRAM_BASE, SZ_256K, 0x80000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I)
+ tlbentry( CFG_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
+ tlbentry( CFG_SDRAM_BASE+0x10000000, SZ_256M, 0x10000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
+ tlbentry( CFG_SDRAM_BASE+0x20000000, SZ_256M, 0x20000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
+ tlbentry( CFG_SDRAM_BASE+0x30000000, SZ_256M, 0x30000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
+ tlbentry( CFG_PCI_BASE, SZ_256M, 0x00000000, 2, AC_R|AC_W|SA_G|SA_I )
+ tlbentry( CFG_PCI_MEMBASE, SZ_256M, 0x00000000, 3, AC_R|AC_W|SA_G|SA_I )
+ tlbtab_end
diff --git a/board/sandburst/metrobox/metrobox.c b/board/sandburst/metrobox/metrobox.c
new file mode 100644
index 0000000..2f65d8f
--- /dev/null
+++ b/board/sandburst/metrobox/metrobox.c
@@ -0,0 +1,570 @@
+/*
+ * Copyright (c) 2005
+ * Travis B. Sawyer, Sandburst Corporation, tsawyer@sandburst.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <config.h>
+#include <common.h>
+#include <command.h>
+#include "metrobox.h"
+#include "metrobox_version.h"
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <spd_sdram.h>
+#include <i2c.h>
+#include "../common/ppc440gx_i2c.h"
+#include "../common/sb_common.h"
+
+
+
+void fpga_init (void);
+
+METROBOX_BOARD_ID_ST board_id_as[] =
+{ {"Undefined"}, /* Not specified */
+ {"2x10Gb"}, /* 2 ports, 10 GbE */
+ {"20x1Gb"}, /* 20 ports, 1 GbE */
+ {"Reserved"}, /* Reserved for future use */
+};
+
+
+/*************************************************************************
+ * board_early_init_f
+ *
+ * Setup chip selects, initialize the Opto-FPGA, initialize
+ * interrupt polarity and triggers.
+ *
+ ************************************************************************/
+int board_early_init_f (void)
+{
+ ppc440_gpio_regs_t *gpio_regs;
+
+ /* Enable GPIO interrupts */
+ mtsdr(sdr_pfc0, 0x00103E00);
+
+ /* Setup access for LEDs, and system topology info */
+ gpio_regs = (ppc440_gpio_regs_t *)CFG_GPIO_BASE;
+ gpio_regs->open_drain = SBCOMMON_GPIO_SYS_LEDS;
+ gpio_regs->tri_state = SBCOMMON_GPIO_DBGLEDS;
+
+ /* Turn on all the leds for now */
+ gpio_regs->out = SBCOMMON_GPIO_LEDS;
+
+ /*--------------------------------------------------------------------+
+ | Initialize EBC CONFIG
+ +-------------------------------------------------------------------*/
+ mtebc(xbcfg,
+ EBC_CFG_LE_UNLOCK | EBC_CFG_PTD_ENABLE |
+ EBC_CFG_RTC_64PERCLK | EBC_CFG_ATC_PREVIOUS |
+ EBC_CFG_DTC_PREVIOUS | EBC_CFG_CTC_PREVIOUS |
+ EBC_CFG_EMC_DEFAULT | EBC_CFG_PME_DISABLE |
+ EBC_CFG_PR_32);
+
+ /*--------------------------------------------------------------------+
+ | 1/2 MB FLASH. Initialize bank 0 with default values.
+ +-------------------------------------------------------------------*/
+ mtebc(pb0ap,
+ EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(8) |
+ EBC_BXAP_BCE_DISABLE | EBC_BXAP_CSN_ENCODE(1) |
+ EBC_BXAP_OEN_ENCODE(1)| EBC_BXAP_WBN_ENCODE(1) |
+ EBC_BXAP_WBF_ENCODE(1)| EBC_BXAP_TH_ENCODE(1) |
+ EBC_BXAP_RE_DISABLED | EBC_BXAP_BEM_WRITEONLY |
+ EBC_BXAP_PEN_DISABLED);
+
+ mtebc(pb0cr, EBC_BXCR_BAS_ENCODE(CFG_FLASH_BASE) |
+ EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_8BIT);
+ /*--------------------------------------------------------------------+
+ | 8KB NVRAM/RTC. Initialize bank 1 with default values.
+ +-------------------------------------------------------------------*/
+ mtebc(pb1ap,
+ EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(10) |
+ EBC_BXAP_BCE_DISABLE | EBC_BXAP_CSN_ENCODE(1) |
+ EBC_BXAP_OEN_ENCODE(1)| EBC_BXAP_WBN_ENCODE(1) |
+ EBC_BXAP_WBF_ENCODE(1)| EBC_BXAP_TH_ENCODE(1) |
+ EBC_BXAP_RE_DISABLED | EBC_BXAP_BEM_WRITEONLY |
+ EBC_BXAP_PEN_DISABLED);
+
+ mtebc(pb1cr, EBC_BXCR_BAS_ENCODE(0x48000000) |
+ EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_8BIT);
+
+ /*--------------------------------------------------------------------+
+ | Compact Flash, uses 2 Chip Selects (2 & 6)
+ +-------------------------------------------------------------------*/
+ mtebc(pb2ap,
+ EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(8) |
+ EBC_BXAP_BCE_DISABLE | EBC_BXAP_CSN_ENCODE(1) |
+ EBC_BXAP_OEN_ENCODE(1)| EBC_BXAP_WBN_ENCODE(1) |
+ EBC_BXAP_WBF_ENCODE(0)| EBC_BXAP_TH_ENCODE(1) |
+ EBC_BXAP_RE_DISABLED | EBC_BXAP_BEM_WRITEONLY |
+ EBC_BXAP_PEN_DISABLED);
+
+ mtebc(pb2cr, EBC_BXCR_BAS_ENCODE(0xF0000000) |
+ EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_16BIT);
+
+ /*--------------------------------------------------------------------+
+ | OPTO & OFEM FPGA. Initialize bank 3 with default values.
+ +-------------------------------------------------------------------*/
+ mtebc(pb3ap,
+ EBC_BXAP_RE_ENABLED | EBC_BXAP_SOR_NONDELAYED |
+ EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(3) |
+ EBC_BXAP_TH_ENCODE(1) | EBC_BXAP_WBF_ENCODE(0) |
+ EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_PEN_DISABLED |
+ EBC_BXAP_OEN_ENCODE(1) | EBC_BXAP_BEM_RW);
+
+ mtebc(pb3cr, EBC_BXCR_BAS_ENCODE(0x48200000) |
+ EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_32BIT);
+
+ /*--------------------------------------------------------------------+
+ | MAC A for metrobox
+ | MAC A & B for Kamino. OFEM FPGA decodes the addresses
+ | Initialize bank 4 with default values.
+ +-------------------------------------------------------------------*/
+ mtebc(pb4ap,
+ EBC_BXAP_RE_ENABLED | EBC_BXAP_SOR_NONDELAYED |
+ EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(3) |
+ EBC_BXAP_TH_ENCODE(1) | EBC_BXAP_WBF_ENCODE(0) |
+ EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_PEN_DISABLED |
+ EBC_BXAP_OEN_ENCODE(1) | EBC_BXAP_BEM_RW);
+
+ mtebc(pb4cr, EBC_BXCR_BAS_ENCODE(0x48600000) |
+ EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_32BIT);
+
+ /*--------------------------------------------------------------------+
+ | Metrobox MAC B Initialize bank 5 with default values.
+ | KA REF FPGA Initialize bank 5 with default values.
+ +-------------------------------------------------------------------*/
+ mtebc(pb5ap,
+ EBC_BXAP_RE_ENABLED | EBC_BXAP_SOR_NONDELAYED |
+ EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(3) |
+ EBC_BXAP_TH_ENCODE(1) | EBC_BXAP_WBF_ENCODE(0) |
+ EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_PEN_DISABLED |
+ EBC_BXAP_OEN_ENCODE(1) | EBC_BXAP_BEM_RW);
+
+ mtebc(pb5cr, EBC_BXCR_BAS_ENCODE(0x48700000) |
+ EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_32BIT);
+
+ /*--------------------------------------------------------------------+
+ | Compact Flash, uses 2 Chip Selects (2 & 6)
+ +-------------------------------------------------------------------*/
+ mtebc(pb6ap,
+ EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(8) |
+ EBC_BXAP_BCE_DISABLE | EBC_BXAP_CSN_ENCODE(1) |
+ EBC_BXAP_OEN_ENCODE(1)| EBC_BXAP_WBN_ENCODE(1) |
+ EBC_BXAP_WBF_ENCODE(0)| EBC_BXAP_TH_ENCODE(1) |
+ EBC_BXAP_RE_DISABLED | EBC_BXAP_BEM_WRITEONLY |
+ EBC_BXAP_PEN_DISABLED);
+
+ mtebc(pb6cr, EBC_BXCR_BAS_ENCODE(0xF0100000) |
+ EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_16BIT);
+
+ /*--------------------------------------------------------------------+
+ | BME-32. Initialize bank 7 with default values.
+ +-------------------------------------------------------------------*/
+ mtebc(pb7ap,
+ EBC_BXAP_RE_ENABLED | EBC_BXAP_SOR_NONDELAYED |
+ EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(3) |
+ EBC_BXAP_TH_ENCODE(1) | EBC_BXAP_WBF_ENCODE(0) |
+ EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_PEN_DISABLED |
+ EBC_BXAP_OEN_ENCODE(1) | EBC_BXAP_BEM_RW);
+
+ mtebc(pb7cr, EBC_BXCR_BAS_ENCODE(0x48500000) |
+ EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_32BIT);
+
+
+ /*--------------------------------------------------------------------+
+ * Setup the interrupt controller polarities, triggers, etc.
+ +-------------------------------------------------------------------*/
+ mtdcr (uic0sr, 0xffffffff); /* clear all */
+ mtdcr (uic0er, 0x00000000); /* disable all */
+ mtdcr (uic0cr, 0x00000000); /* all non- critical */
+ mtdcr (uic0pr, 0xfffffe03); /* polarity */
+ mtdcr (uic0tr, 0x01c00000); /* trigger edge vs level */
+ mtdcr (uic0vr, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr (uic0sr, 0xffffffff); /* clear all */
+
+ mtdcr (uic1sr, 0xffffffff); /* clear all */
+ mtdcr (uic1er, 0x00000000); /* disable all */
+ mtdcr (uic1cr, 0x00000000); /* all non-critical */
+ mtdcr (uic1pr, 0xffffc8ff); /* polarity */
+ mtdcr (uic1tr, 0x00ff0000); /* trigger edge vs level */
+ mtdcr (uic1vr, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr (uic1sr, 0xffffffff); /* clear all */
+
+ mtdcr (uic2sr, 0xffffffff); /* clear all */
+ mtdcr (uic2er, 0x00000000); /* disable all */
+ mtdcr (uic2cr, 0x00000000); /* all non-critical */
+ mtdcr (uic2pr, 0xffff83ff); /* polarity */
+ mtdcr (uic2tr, 0x00ff8c0f); /* trigger edge vs level */
+ mtdcr (uic2vr, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr (uic2sr, 0xffffffff); /* clear all */
+
+ mtdcr (uicb0sr, 0xfc000000); /* clear all */
+ mtdcr (uicb0er, 0x00000000); /* disable all */
+ mtdcr (uicb0cr, 0x00000000); /* all non-critical */
+ mtdcr (uicb0pr, 0xfc000000);
+ mtdcr (uicb0tr, 0x00000000);
+ mtdcr (uicb0vr, 0x00000001);
+
+ fpga_init();
+
+ return 0;
+}
+
+
+/*************************************************************************
+ * checkboard
+ *
+ * Dump pertinent info to the console
+ *
+ ************************************************************************/
+int checkboard (void)
+{
+ sys_info_t sysinfo;
+ unsigned char brd_rev, brd_id;
+ unsigned short sernum;
+ unsigned char opto_rev, opto_id;
+ OPTO_FPGA_REGS_ST *opto_ps;
+
+ opto_ps = (OPTO_FPGA_REGS_ST *)CFG_FPGA_BASE;
+
+ opto_rev = (unsigned char)((opto_ps->revision_ul &
+ SAND_HAL_XC_XCVR_CNTL_REVISION_REVISION_MASK)
+ >> SAND_HAL_XC_XCVR_CNTL_REVISION_REVISION_SHIFT);
+
+ opto_id = (unsigned char)((opto_ps->revision_ul &
+ SAND_HAL_XC_XCVR_CNTL_REVISION_IDENTIFICATION_MASK)
+ >> SAND_HAL_XC_XCVR_CNTL_REVISION_IDENTIFICATION_SHIFT);
+
+ brd_rev = (unsigned char)((opto_ps->boardinfo_ul &
+ SAND_HAL_XC_XCVR_CNTL_BRD_INFO_BRD_REV_MASK)
+ >> SAND_HAL_XC_XCVR_CNTL_BRD_INFO_BRD_REV_SHIFT);
+
+ brd_id = (unsigned char)((opto_ps->boardinfo_ul &
+ SAND_HAL_XC_XCVR_CNTL_BRD_INFO_BRD_ID_MASK)
+ >> SAND_HAL_XC_XCVR_CNTL_BRD_INFO_BRD_ID_SHIFT);
+
+ get_sys_info (&sysinfo);
+
+ sernum = sbcommon_get_serial_number();
+ printf ("Board: Sandburst Corporation MetroBox Serial Number: %d\n", sernum);
+ printf ("%s\n", METROBOX_U_BOOT_REL_STR);
+
+ printf ("Built %s %s by %s\n", __DATE__, __TIME__, BUILDUSER);
+ if (sbcommon_get_master()) {
+ printf("Slot 0 - Master\nSlave board");
+ if (sbcommon_secondary_present())
+ printf(" present\n");
+ else
+ printf(" not detected\n");
+ } else {
+ printf("Slot 1 - Slave\n\n");
+ }
+
+ printf ("OptoFPGA ID:\t0x%02X\tRev: 0x%02X\n", opto_id, opto_rev);
+ printf ("Board Rev:\t0x%02X\tID: %s\n", brd_rev, board_id_as[brd_id]);
+
+ printf ("\tVCO: %lu MHz\n", sysinfo.freqVCOMhz / 1000000);
+ printf ("\tCPU: %lu MHz\n", sysinfo.freqProcessor / 1000000);
+ printf ("\tPLB: %lu MHz\n", sysinfo.freqPLB / 1000000);
+ printf ("\tOPB: %lu MHz\n", sysinfo.freqOPB / 1000000);
+ printf ("\tEPB: %lu MHz\n", sysinfo.freqEPB / 1000000);
+
+
+ /* Fix the ack in the bme 32 */
+ udelay(5000);
+ out32(CFG_BME32_BASE + 0x0000000C, 0x00000001);
+ asm("eieio");
+
+
+ return (0);
+}
+
+
+/*************************************************************************
+ * misc_init_f
+ *
+ * Initialize I2C bus one to gain access to the fans
+ *
+ ************************************************************************/
+int misc_init_f (void)
+{
+ /* Turn on i2c bus 1 */
+ puts ("I2C1: ");
+ i2c1_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+ puts ("ready\n");
+
+ /* Turn on fans */
+ sbcommon_fans();
+
+ return (0);
+}
+/*************************************************************************
+ * misc_init_r
+ *
+ * Do nothing.
+ *
+ ************************************************************************/
+int misc_init_r (void)
+{
+ unsigned short sernum;
+ char envstr[255];
+ unsigned char opto_rev;
+ OPTO_FPGA_REGS_ST *opto_ps;
+
+ opto_ps = (OPTO_FPGA_REGS_ST *)CFG_FPGA_BASE;
+
+ if(NULL != getenv("secondserial")) {
+ puts("secondserial is set, switching to second serial port\n");
+ setenv("stderr", "serial1");
+ setenv("stdout", "serial1");
+ setenv("stdin", "serial1");
+ }
+
+ setenv("ubrelver", METROBOX_U_BOOT_REL_STR);
+
+ memset(envstr, 0, 255);
+ sprintf (envstr, "Built %s %s by %s", __DATE__, __TIME__, BUILDUSER);
+ setenv("bldstr", envstr);
+ saveenv();
+
+ if( getenv("autorecover")) {
+ setenv("autorecover", NULL);
+ saveenv();
+ sernum = sbcommon_get_serial_number();
+
+ printf("\nSetting up environment for automatic filesystem recovery\n");
+ /*
+ * Setup default bootargs
+ */
+ memset(envstr, 0, 255);
+ sprintf(envstr, "console=ttyS0,9600 root=/dev/ram0 "
+ "rw ip=10.100.60.%d:::255.255.0.0:metrobox%d:eth0:none idebus=33",
+ sernum, sernum);
+ setenv("bootargs", envstr);
+
+ /*
+ * Setup Default boot command
+ */
+ setenv("bootcmd", "fatload ide 0 8000000 pimage.metrobox;"
+ "fatload ide 0 8100000 pramdisk;"
+ "bootm 8000000 8100000");
+
+ printf("Done. Please type allow the system to continue to boot\n");
+ }
+
+ if( getenv("fakeled")) {
+ setenv("bootdelay", "-1");
+ saveenv();
+ printf("fakeled is set. use 'setenv fakeled ; setenv bootdelay 5 ; saveenv' to recover\n");
+ opto_rev = (unsigned char)((opto_ps->revision_ul &
+ SAND_HAL_XC_XCVR_CNTL_REVISION_REVISION_MASK)
+ >> SAND_HAL_XC_XCVR_CNTL_REVISION_REVISION_SHIFT);
+
+ if(0x12 <= opto_rev) {
+ opto_ps->control_ul &= ~ SAND_HAL_XC_XCVR_CNTL_CNTL_ERROR_LED_MASK;
+ }
+ }
+
+ return (0);
+}
+
+
+
+/*************************************************************************
+ * ide_set_reset
+ *
+ *
+ *
+ ************************************************************************/
+#ifdef CONFIG_IDE_RESET
+void ide_set_reset(int on)
+{
+ OPTO_FPGA_REGS_ST *opto_ps;
+ opto_ps = (OPTO_FPGA_REGS_ST *)CFG_FPGA_BASE;
+
+ if (on) { /* assert RESET */
+ opto_ps->reset_ul &= ~SAND_HAL_XC_XCVR_CNTL_RESET_CF_RESET_N_MASK;
+ } else { /* release RESET */
+ opto_ps->reset_ul |= SAND_HAL_XC_XCVR_CNTL_RESET_CF_RESET_N_MASK;
+ }
+}
+#endif /* CONFIG_IDE_RESET */
+
+/*************************************************************************
+ * fpga_init
+ *
+ *
+ *
+ ************************************************************************/
+void fpga_init(void)
+{
+ OPTO_FPGA_REGS_ST *opto_ps;
+ unsigned char opto_rev;
+ unsigned long tmp;
+
+ /* Ensure we have power all around */
+ udelay(500);
+
+ /*
+ * Take appropriate hw bits out of reset
+ */
+ opto_ps = (OPTO_FPGA_REGS_ST *)CFG_FPGA_BASE;
+
+ tmp =
+ SAND_HAL_XC_XCVR_CNTL_RESET_MAC1_RESET_N_MASK |
+ SAND_HAL_XC_XCVR_CNTL_RESET_MAC0_RESET_N_MASK |
+ SAND_HAL_XC_XCVR_CNTL_RESET_BME_RESET_N_MASK |
+ SAND_HAL_XC_XCVR_CNTL_RESET_ACE_RESET_N_MASK |
+ SAND_HAL_XC_XCVR_CNTL_RESET_CF_RESET_N_MASK |
+ SAND_HAL_XC_XCVR_CNTL_RESET_QE_A_RESET_N_MASK |
+ SAND_HAL_XC_XCVR_CNTL_RESET_IFE_A_RESET_N_MASK |
+ SAND_HAL_XC_XCVR_CNTL_RESET_EFE_A_RESET_N_MASK |
+ SAND_HAL_XC_XCVR_CNTL_RESET_QE_B_RESET_N_MASK |
+ SAND_HAL_XC_XCVR_CNTL_RESET_IFE_B_RESET_N_MASK |
+ SAND_HAL_XC_XCVR_CNTL_RESET_EFE_B_RESET_N_MASK |
+ SAND_HAL_XC_XCVR_CNTL_RESET_LOCK1_RESET_N_MASK |
+ SAND_HAL_XC_XCVR_CNTL_RESET_LOCK0_RESET_N_MASK |
+ SAND_HAL_XC_XCVR_CNTL_RESET_I2C_MUX1_RESET_N_MASK |
+ SAND_HAL_XC_XCVR_CNTL_RESET_I2C_MUX0_RESET_N_MASK |
+ SAND_HAL_XC_XCVR_CNTL_RESET_PHY0_RESET_N_MASK |
+ SAND_HAL_XC_XCVR_CNTL_RESET_PHY1_RESET_N_MASK |
+ SAND_HAL_XC_XCVR_CNTL_RESET_SLAVE_RESET_N_MASK;
+ opto_ps->reset_ul = tmp;
+ /*
+ * Turn on the 'Slow Blink' for the System Error Led.
+ * Ensure FPGA rev is up to at least rev 0x12
+ */
+ opto_rev = (unsigned char)((opto_ps->revision_ul &
+ SAND_HAL_XC_XCVR_CNTL_REVISION_REVISION_MASK)
+ >> SAND_HAL_XC_XCVR_CNTL_REVISION_REVISION_SHIFT);
+ if(0x12 <= opto_rev) {
+ opto_ps->control_ul |= 1 << SAND_HAL_XC_XCVR_CNTL_CNTL_ERROR_LED_SHIFT;
+ }
+
+ asm("eieio");
+
+ return;
+}
+
+
+
+int metroboxSetupVars(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ unsigned short sernum;
+ char envstr[255];
+
+ sernum = sbcommon_get_serial_number();
+
+ memset(envstr, 0, 255);
+ /*
+ * Setup our ip address
+ */
+ sprintf(envstr, "10.100.60.%d", sernum);
+
+ setenv("ipaddr", envstr);
+ /*
+ * Setup the host ip address
+ */
+ setenv("serverip", "10.100.17.10");
+
+ /*
+ * Setup default bootargs
+ */
+ memset(envstr, 0, 255);
+
+ sprintf(envstr, "console=ttyS0,9600 root=/dev/nfs "
+ "rw nfsroot=10.100.17.10:/home/metrobox/mbc%d "
+ "nfsaddrs=10.100.60.%d:10.100.17.10:10.100.1.1"
+ ":255.255.0.0:metrobox%d.sandburst.com:eth0:none idebus=33",
+ sernum, sernum, sernum);
+
+ setenv("bootargs_nfs", envstr);
+ setenv("bootargs", envstr);
+
+ /*
+ * Setup CF bootargs
+ */
+ memset(envstr, 0, 255);
+ sprintf(envstr, "console=ttyS0,9600 root=/dev/hda2 "
+ "rw ip=10.100.60.%d:::255.255.0.0:metrobox%d:eth0:none idebus=33",
+ sernum, sernum);
+
+ setenv("bootargs_cf", envstr);
+
+ /*
+ * Setup Default boot command
+ */
+ setenv("bootcmd_tftp", "tftp 8000000 pImage.metrobox;bootm 8000000");
+ setenv("bootcmd", "tftp 8000000 pImage.metrobox;bootm 8000000");
+
+ /*
+ * Setup compact flash boot command
+ */
+ setenv("bootcmd_cf", "fatload ide 0 8000000 pimage.metrobox;bootm 8000000");
+
+ saveenv();
+
+
+ return(1);
+}
+
+
+int metroboxRecover(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ unsigned short sernum;
+ char envstr[255];
+
+ sernum = sbcommon_get_serial_number();
+
+ printf("\nSetting up environment for filesystem recovery\n");
+ /*
+ * Setup default bootargs
+ */
+ memset(envstr, 0, 255);
+ sprintf(envstr, "console=ttyS0,9600 root=/dev/ram0 "
+ "rw ip=10.100.60.%d:::255.255.0.0:metrobox%d:eth0:none",
+ sernum, sernum);
+
+ setenv("bootargs", envstr);
+
+ /*
+ * Setup Default boot command
+ */
+ setenv("bootcmd", "fatload ide 0 8000000 pimage.metrobox;"
+ "fatload ide 0 8100000 pramdisk;"
+ "bootm 8000000 8100000");
+
+ printf("Done. Please type boot<cr>.\nWhen the kernel has booted"
+ " please type fsrecover.sh<cr>\n");
+
+ return(1);
+}
+
+
+
+
+
+
+
+U_BOOT_CMD(mbsetup, 1, 1, metroboxSetupVars,
+ "mbsetup - Set environment to factory defaults\n", NULL);
+
+U_BOOT_CMD(mbrecover, 1, 1, metroboxRecover,
+ "mbrecover - Set environment to allow for fs recovery\n", NULL);
+
diff --git a/board/sandburst/metrobox/metrobox.h b/board/sandburst/metrobox/metrobox.h
new file mode 100644
index 0000000..964dc71
--- /dev/null
+++ b/board/sandburst/metrobox/metrobox.h
@@ -0,0 +1,48 @@
+#ifndef __METROBOX_H__
+#define __METROBOX_H__
+/*
+ * (C) Copyright 2005
+ * Travis B. Sawyer, Sandburst Corporation, tsawyer@sandburst.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+typedef struct metrobox_board_id_s {
+ const char name[40];
+} METROBOX_BOARD_ID_ST, *METROBOX_BOARD_ID_PST;
+
+
+/* Metrobox Opto-FPGA registers and definitions */
+#include "hal_xc_auto.h"
+typedef struct opto_fpga_regs_s
+{
+ volatile unsigned long revision_ul; /* Read Only */
+ volatile unsigned long reset_ul; /* Read/Write */
+ volatile unsigned long status_ul; /* Read Only */
+ volatile unsigned long interrupt_ul; /* Read Only */
+ volatile unsigned long mask_ul; /* Read/Write */
+ volatile unsigned long scratch_ul; /* Read/Write */
+ volatile unsigned long scrmask_ul; /* Read/Write */
+ volatile unsigned long control_ul; /* Read/Write */
+ volatile unsigned long boardinfo_ul; /* Read Only */
+} OPTO_FPGA_REGS_ST __attribute__((packed)), *OPTO_FPGA_REGS_PST;
+
+
+
+#endif /* __METROBOX_H__ */
diff --git a/board/sandburst/metrobox/metrobox_version.h b/board/sandburst/metrobox/metrobox_version.h
new file mode 100644
index 0000000..1b6fee5
--- /dev/null
+++ b/board/sandburst/metrobox/metrobox_version.h
@@ -0,0 +1,27 @@
+#ifndef _METROBOX_VERSION_H_
+#define _METROBOX_VERSION_H_
+/*
+ * (C) Copyright 2005
+ * Travis B. Sawyer, Sandburst Corporation, tsawyer@sandburst.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#define METROBOX_U_BOOT_REL_STR "Release 2.0.3"
+
+#endif
diff --git a/board/sandburst/metrobox/u-boot.lds b/board/sandburst/metrobox/u-boot.lds
new file mode 100644
index 0000000..0fdb166
--- /dev/null
+++ b/board/sandburst/metrobox/u-boot.lds
@@ -0,0 +1,156 @@
+/*
+ * (C) Copyright 2005
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ * Travis B. Sawyer, Sandburst Corporation, tsawyer@sandburst.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ .resetvec 0xFFFFFFFC :
+ {
+ *(.resetvec)
+ } = 0xffff
+
+ .bootpg 0xFFFFF000 :
+ {
+ cpu/ppc4xx/start.o (.bootpg)
+ } = 0xffff
+
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ /* WARNING - the following is hand-optimized to fit within */
+ /* the sector layout of our flash chips! XXX FIXME XXX */
+
+ cpu/ppc4xx/start.o (.text)
+ board/sandburst/metrobox/init.o (.text)
+ cpu/ppc4xx/kgdb.o (.text)
+ cpu/ppc4xx/traps.o (.text)
+ cpu/ppc4xx/interrupts.o (.text)
+ cpu/ppc4xx/serial.o (.text)
+ cpu/ppc4xx/cpu_init.o (.text)
+ cpu/ppc4xx/speed.o (.text)
+ cpu/ppc4xx/440gx_enet.o (.text)
+ common/dlmalloc.o (.text)
+ lib_generic/crc32.o (.text)
+ lib_ppc/extable.o (.text)
+ lib_generic/zlib.o (.text)
+
+/* . = env_offset;*/
+/* common/environment.o(.text)*/
+
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.rodata)
+ *(.rodata1)
+ *(.rodata.str1.4)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x00FF) & 0xFFFFFF00;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+ __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(256);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
diff --git a/board/sandburst/metrobox/u-boot.lds.debug b/board/sandburst/metrobox/u-boot.lds.debug
new file mode 100644
index 0000000..459a1d8
--- /dev/null
+++ b/board/sandburst/metrobox/u-boot.lds.debug
@@ -0,0 +1,145 @@
+/*
+ * (C) Copyright 2002-2005
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ * Travis B. Sawyer, Sandburst Corporation, tsawyer@sandburst.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ /* WARNING - the following is hand-optimized to fit within */
+ /* the sector layout of our flash chips! XXX FIXME XXX */
+
+ cpu/ppc4xx/start.o (.text)
+ board/sandburst/metrobox/init.o (.text)
+ cpu/ppc4xx/kgdb.o (.text)
+ cpu/ppc4xx/traps.o (.text)
+ cpu/ppc4xx/interrupts.o (.text)
+ cpu/ppc4xx/serial.o (.text)
+ cpu/ppc4xx/cpu_init.o (.text)
+ cpu/ppc4xx/speed.o (.text)
+ cpu/ppc4xx/440gx_enet.o (.text)
+ common/dlmalloc.o (.text)
+ lib_generic/crc32.o (.text)
+ lib_ppc/extable.o (.text)
+ lib_generic/zlib.o (.text)
+
+/* common/environment.o(.text) */
+
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.rodata)
+ *(.rodata1)
+ *(.rodata.str1.4)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x0FFF) & 0xFFFFF000;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+ __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(256);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}