diff --git a/board/sandburst/common/flash.c b/board/sandburst/common/flash.c
new file mode 100644
index 0000000..762fb73
--- /dev/null
+++ b/board/sandburst/common/flash.c
@@ -0,0 +1,512 @@
+/*
+ * (C) Copyright 2002-2005
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2002 Jun Gu <jung@artesyncp.com>
+ * Add support for Am29F016D and dynamic switch setting.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+/*
+ * Ported from Ebony flash support
+ * Travis B. Sawyer
+ * Sandburst Corporation
+ */
+#include <common.h>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+
+
+#undef DEBUG
+#ifdef DEBUG
+#define DEBUGF(x...) printf(x)
+#else
+#define DEBUGF(x...)
+#endif /* DEBUG */
+
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+
+static unsigned long flash_addr_table[8][CFG_MAX_FLASH_BANKS] = {
+	{0xfff80000}	/* Boot Flash */
+};
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size (vu_long *addr, flash_info_t *info);
+static int write_word (flash_info_t *info, ulong dest, ulong data);
+
+
+#define ADDR0		0x5555
+#define ADDR1		0x2aaa
+#define FLASH_WORD_SIZE unsigned char
+
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+	unsigned long total_b = 0;
+	unsigned long size_b[CFG_MAX_FLASH_BANKS];
+	unsigned short index = 0;
+	int i;
+
+
+	DEBUGF("\n");
+	DEBUGF("FLASH: Index: %d\n", index);
+
+	/* Init: no FLASHes known */
+	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+		flash_info[i].flash_id = FLASH_UNKNOWN;
+		flash_info[i].sector_count = -1;
+		flash_info[i].size = 0;
+
+		/* check whether the address is 0 */
+		if (flash_addr_table[index][i] == 0) {
+			continue;
+		}
+
+		/* call flash_get_size() to initialize sector address */
+		size_b[i] = flash_get_size(
+			(vu_long *)flash_addr_table[index][i], &flash_info[i]);
+		flash_info[i].size = size_b[i];
+		if (flash_info[i].flash_id == FLASH_UNKNOWN) {
+			printf ("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n",
+				i, size_b[i], size_b[i]<<20);
+			flash_info[i].sector_count = -1;
+			flash_info[i].size = 0;
+		}
+
+		total_b += flash_info[i].size;
+	}
+
+	return total_b;
+}
+
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info  (flash_info_t *info)
+{
+	int i;
+	int k;
+	int size;
+	int erased;
+	volatile unsigned long *flash;
+
+	if (info->flash_id == FLASH_UNKNOWN) {
+		printf ("missing or unknown FLASH type\n");
+		return;
+	}
+
+	switch (info->flash_id & FLASH_VENDMASK) {
+	case FLASH_MAN_AMD:	printf ("AMD ");		break;
+	default:		printf ("Unknown Vendor ");	break;
+	}
+
+	switch (info->flash_id & FLASH_TYPEMASK) {
+	case FLASH_AM040:	printf ("AM29F040 (512 Kbit, uniform sector size)\n");
+		break;
+	default:		printf ("Unknown Chip Type\n");
+		break;
+	}
+
+	printf ("  Size: %ld KB in %d Sectors\n",
+		info->size >> 10, info->sector_count);
+
+	printf ("  Sector Start Addresses:");
+	for (i=0; i<info->sector_count; ++i) {
+		/*
+		 * Check if whole sector is erased
+		 */
+		if (i != (info->sector_count-1))
+			size = info->start[i+1] - info->start[i];
+		else
+			size = info->start[0] + info->size - info->start[i];
+		erased = 1;
+		flash = (volatile unsigned long *)info->start[i];
+		size = size >> 2;	 /* divide by 4 for longword access */
+		for (k=0; k<size; k++)
+		{
+			if (*flash++ != 0xffffffff)
+			{
+				erased = 0;
+				break;
+			}
+		}
+
+		if ((i % 5) == 0)
+			printf ("\n   ");
+			printf (" %08lX%s%s",
+				info->start[i],
+				erased ? " E" : "  ",
+				info->protect[i] ? "RO " : "   "
+				);
+			}
+		printf ("\n");
+		return;
+	}
+
+/*-----------------------------------------------------------------------
+ */
+
+
+/*-----------------------------------------------------------------------
+ */
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+static ulong flash_get_size (vu_long *addr, flash_info_t *info)
+{
+	short i;
+	FLASH_WORD_SIZE value;
+	ulong base = (ulong)addr;
+	volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *)addr;
+
+	DEBUGF("FLASH ADDR: %08x\n", (unsigned)addr );
+
+	/* Write auto select command: read Manufacturer ID */
+	udelay(10000);
+	addr2[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
+	udelay(1000);
+	addr2[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
+	udelay(1000);
+	addr2[ADDR0] = (FLASH_WORD_SIZE)0x00900090;
+	udelay(1000);
+
+	value = addr2[0];
+
+	DEBUGF("FLASH MANUFACT: %x\n", value);
+
+	switch (value) {
+	case (FLASH_WORD_SIZE)AMD_MANUFACT:
+		info->flash_id = FLASH_MAN_AMD;
+		break;
+	default:
+		info->flash_id = FLASH_UNKNOWN;
+		info->sector_count = 0;
+		info->size = 0;
+		return (0);			/* no or unknown flash	*/
+	}
+
+	value = addr2[1];			/* device ID		*/
+
+	DEBUGF("\nFLASH DEVICEID: %x\n", value);
+
+	switch (value) {
+	case (FLASH_WORD_SIZE)AMD_ID_LV040B:
+		info->flash_id += FLASH_AM040;
+		info->sector_count = 8;
+		info->size = 0x00080000; /* => 512 kb */
+		break;
+
+	default:
+		info->flash_id = FLASH_UNKNOWN;
+		return (0);			/* => no or unknown flash */
+
+	}
+
+	/* set up sector start address table */
+	if (info->flash_id  == FLASH_AM040) {
+		for (i = 0; i < info->sector_count; i++)
+			info->start[i] = base + (i * 0x00010000);
+	} else {
+		if (info->flash_id & FLASH_BTYPE) {
+			/* set sector offsets for bottom boot block type	*/
+			info->start[0] = base + 0x00000000;
+			info->start[1] = base + 0x00004000;
+			info->start[2] = base + 0x00006000;
+			info->start[3] = base + 0x00008000;
+			for (i = 4; i < info->sector_count; i++) {
+				info->start[i] = base + (i * 0x00010000) - 0x00030000;
+			}
+		} else {
+			/* set sector offsets for top boot block type		*/
+			i = info->sector_count - 1;
+			info->start[i--] = base + info->size - 0x00004000;
+			info->start[i--] = base + info->size - 0x00006000;
+			info->start[i--] = base + info->size - 0x00008000;
+			for (; i >= 0; i--) {
+				info->start[i] = base + i * 0x00010000;
+			}
+		}
+	}
+
+	/* check for protected sectors */
+	for (i = 0; i < info->sector_count; i++) {
+		/* read sector protection at sector address, (A7 .. A0) = 0x02 */
+		/* D0 = 1 if protected */
+		addr2 = (volatile FLASH_WORD_SIZE *)(info->start[i]);
+		if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST)
+			info->protect[i] = 0;
+		else
+			info->protect[i] = addr2[2] & 1;
+	}
+
+	/* reset to return to reading data */
+	addr2[0] = (FLASH_WORD_SIZE) 0x00F000F0;	/* reset bank */
+
+	/*
+	 * Prevent writes to uninitialized FLASH.
+	 */
+	if (info->flash_id != FLASH_UNKNOWN) {
+		addr2 = (FLASH_WORD_SIZE *)info->start[0];
+		*addr2 = (FLASH_WORD_SIZE)0x00F000F0;	/* reset bank */
+	}
+
+	return (info->size);
+}
+
+int wait_for_DQ7(flash_info_t *info, int sect)
+{
+	ulong start, now, last;
+	volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *)(info->start[sect]);
+
+	start = get_timer (0);
+	last  = start;
+	while ((addr[0] & (FLASH_WORD_SIZE)0x00800080) != (FLASH_WORD_SIZE)0x00800080) {
+		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+			printf ("Timeout\n");
+			return -1;
+		}
+		/* show that we're waiting */
+		if ((now - last) > 1000) {  /* every second */
+			putc ('.');
+			last = now;
+		}
+	}
+	return 0;
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+int flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+	volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *)(info->start[0]);
+	volatile FLASH_WORD_SIZE *addr2;
+	int flag, prot, sect, l_sect;
+	int i;
+
+	if ((s_first < 0) || (s_first > s_last)) {
+		if (info->flash_id == FLASH_UNKNOWN) {
+			printf ("- missing\n");
+		} else {
+			printf ("- no sectors to erase\n");
+		}
+		return 1;
+	}
+
+	if (info->flash_id == FLASH_UNKNOWN) {
+		printf ("Can't erase unknown flash type - aborted\n");
+		return 1;
+	}
+
+	prot = 0;
+	for (sect=s_first; sect<=s_last; ++sect) {
+		if (info->protect[sect]) {
+			prot++;
+		}
+	}
+
+	if (prot) {
+		printf ("- Warning: %d protected sectors will not be erased!\n",
+			prot);
+	} else {
+		printf ("\n");
+	}
+
+	l_sect = -1;
+
+	/* Disable interrupts which might cause a timeout here */
+	flag = disable_interrupts();
+
+	/* Start erase on unprotected sectors */
+	for (sect = s_first; sect<=s_last; sect++) {
+		if (info->protect[sect] == 0) { /* not protected */
+			addr2 = (FLASH_WORD_SIZE *)(info->start[sect]);
+			DEBUGF("Erasing sector %p\n", addr2);
+
+			if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
+				addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
+				addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
+				addr[ADDR0] = (FLASH_WORD_SIZE)0x00800080;
+				addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
+				addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
+				addr2[0] = (FLASH_WORD_SIZE)0x00500050;	 /* block erase */
+				for (i=0; i<50; i++)
+					udelay(1000);  /* wait 1 ms */
+			} else {
+				addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
+				addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
+				addr[ADDR0] = (FLASH_WORD_SIZE)0x00800080;
+				addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
+				addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
+				addr2[0] = (FLASH_WORD_SIZE)0x00300030;	 /* sector erase */
+			}
+			l_sect = sect;
+			/*
+			 * Wait for each sector to complete, it's more
+			 * reliable.  According to AMD Spec, you must
+			 * issue all erase commands within a specified
+			 * timeout.  This has been seen to fail, especially
+			 * if printf()s are included (for debug)!!
+			 */
+			wait_for_DQ7(info, sect);
+		}
+	}
+
+	/* re-enable interrupts if necessary */
+	if (flag)
+		enable_interrupts();
+
+	/* wait at least 80us - let's wait 1 ms */
+	udelay (1000);
+
+	/* reset to read mode */
+	addr = (FLASH_WORD_SIZE *)info->start[0];
+	addr[0] = (FLASH_WORD_SIZE)0x00F000F0;	/* reset bank */
+
+	printf (" done\n");
+	return 0;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+	ulong cp, wp, data;
+	int i, l, rc;
+
+	wp = (addr & ~3);	/* get lower word aligned address */
+
+	/*
+	 * handle unaligned start bytes
+	 */
+	if ((l = addr - wp) != 0) {
+		data = 0;
+		for (i=0, cp=wp; i<l; ++i, ++cp) {
+			data = (data << 8) | (*(uchar *)cp);
+		}
+		for (; i<4 && cnt>0; ++i) {
+			data = (data << 8) | *src++;
+			--cnt;
+			++cp;
+		}
+		for (; cnt==0 && i<4; ++i, ++cp) {
+			data = (data << 8) | (*(uchar *)cp);
+		}
+
+		if ((rc = write_word(info, wp, data)) != 0) {
+			return (rc);
+		}
+		wp += 4;
+	}
+
+	/*
+	 * handle word aligned part
+	 */
+	while (cnt >= 4) {
+		data = 0;
+		for (i=0; i<4; ++i) {
+			data = (data << 8) | *src++;
+		}
+		if ((rc = write_word(info, wp, data)) != 0) {
+			return (rc);
+		}
+		wp  += 4;
+		cnt -= 4;
+	}
+
+	if (cnt == 0) {
+		return (0);
+	}
+
+	/*
+	 * handle unaligned tail bytes
+	 */
+	data = 0;
+	for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
+		data = (data << 8) | *src++;
+		--cnt;
+	}
+	for (; i<4; ++i, ++cp) {
+		data = (data << 8) | (*(uchar *)cp);
+	}
+
+	return (write_word(info, wp, data));
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_word (flash_info_t * info, ulong dest, ulong data)
+{
+	volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *) (info->start[0]);
+	volatile FLASH_WORD_SIZE *dest2 = (FLASH_WORD_SIZE *) dest;
+	volatile FLASH_WORD_SIZE *data2 = (FLASH_WORD_SIZE *) & data;
+	ulong start;
+	int i;
+
+	/* Check if Flash is (sufficiently) erased */
+	if ((*((volatile FLASH_WORD_SIZE *) dest) &
+	     (FLASH_WORD_SIZE) data) != (FLASH_WORD_SIZE) data) {
+		return (2);
+	}
+
+	for (i = 0; i < 4 / sizeof (FLASH_WORD_SIZE); i++) {
+		int flag;
+
+		/* Disable interrupts which might cause a timeout here */
+		flag = disable_interrupts ();
+
+		addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
+		addr2[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
+		addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00A000A0;
+
+		dest2[i] = data2[i];
+
+		/* re-enable interrupts if necessary */
+		if (flag)
+			enable_interrupts ();
+
+		/* data polling for D7 */
+		start = get_timer (0);
+		while ((dest2[i] & (FLASH_WORD_SIZE) 0x00800080) !=
+		       (data2[i] & (FLASH_WORD_SIZE) 0x00800080)) {
+
+			if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+				return (1);
+			}
+		}
+	}
+
+	return (0);
+}
diff --git a/board/sandburst/common/ppc440gx_i2c.c b/board/sandburst/common/ppc440gx_i2c.c
new file mode 100644
index 0000000..c3b267c
--- /dev/null
+++ b/board/sandburst/common/ppc440gx_i2c.c
@@ -0,0 +1,515 @@
+/*
+ *  Copyright (C) 2005 Sandburst Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Ported from cpu/ppc4xx/i2c.c by AS HARNOIS by
+ * Travis B. Sawyer
+ * Sandburst Corporation.
+ */
+#include <common.h>
+#include <ppc4xx.h>
+#if defined(CONFIG_440)
+#   include <440_i2c.h>
+#else
+#   include <405gp_i2c.h>
+#endif
+#include <i2c.h>
+#include <440_i2c.h>
+#include <command.h>
+#include "ppc440gx_i2c.h"
+
+#ifdef CONFIG_I2C_BUS1
+
+
+
+#define IIC_OK		0
+#define IIC_NOK		1
+#define IIC_NOK_LA	2		/* Lost arbitration */
+#define IIC_NOK_ICT	3		/* Incomplete transfer */
+#define IIC_NOK_XFRA	4		/* Transfer aborted */
+#define IIC_NOK_DATA	5		/* No data in buffer */
+#define IIC_NOK_TOUT	6		/* Transfer timeout */
+
+#define IIC_TIMEOUT 1			/* 1 second */
+#if defined(CFG_I2C_NOPROBES)
+static uchar i2c_no_probes[] = CFG_I2C_NOPROBES;
+#endif
+
+static void _i2c_bus1_reset (void)
+{
+	int i, status;
+
+	/* Reset status register */
+	/* write 1 in SCMP and IRQA to clear these fields */
+	out8 (IIC_STS1, 0x0A);
+
+	/* write 1 in IRQP IRQD LA ICT XFRA to clear these fields */
+	out8 (IIC_EXTSTS1, 0x8F);
+	__asm__ volatile ("eieio");
+
+	/*
+	 * Get current state, reset bus
+	 * only if no transfers are pending.
+	 */
+	i = 10;
+	do {
+		/* Get status */
+		status = in8 (IIC_STS1);
+		udelay (500);			/* 500us */
+		i--;
+	} while ((status & IIC_STS_PT) && (i > 0));
+	/* Soft reset controller */
+	status = in8 (IIC_XTCNTLSS1);
+	out8 (IIC_XTCNTLSS1, (status | IIC_XTCNTLSS_SRST));
+	__asm__ volatile ("eieio");
+
+	/* make sure where in initial state, data hi, clock hi */
+	out8 (IIC_DIRECTCNTL1, 0xC);
+	for (i = 0; i < 10; i++) {
+		if ((in8 (IIC_DIRECTCNTL1) & 0x3) != 0x3) {
+			/* clock until we get to known state */
+			out8 (IIC_DIRECTCNTL1, 0x8);	/* clock lo */
+			udelay (100);		/* 100us */
+			out8 (IIC_DIRECTCNTL1, 0xC);	/* clock hi */
+			udelay (100);		/* 100us */
+		} else {
+			break;
+		}
+	}
+	/* send start condition */
+	out8 (IIC_DIRECTCNTL1, 0x4);
+	udelay (1000);				/* 1ms */
+	/* send stop condition */
+	out8 (IIC_DIRECTCNTL1, 0xC);
+	udelay (1000);				/* 1ms */
+	/* Unreset controller */
+	out8 (IIC_XTCNTLSS1, (status & ~IIC_XTCNTLSS_SRST));
+	udelay (1000);				/* 1ms */
+}
+
+void i2c1_init (int speed, int slaveadd)
+{
+	sys_info_t sysInfo;
+	unsigned long freqOPB;
+	int val, divisor;
+
+#ifdef CFG_I2C_INIT_BOARD
+	/* call board specific i2c bus reset routine before accessing the   */
+	/* environment, which might be in a chip on that bus. For details   */
+	/* about this problem see doc/I2C_Edge_Conditions.                  */
+	i2c_init_board();
+#endif
+
+	/* Handle possible failed I2C state */
+	/* FIXME: put this into i2c_init_board()? */
+	_i2c_bus1_reset ();
+
+	/* clear lo master address */
+	out8 (IIC_LMADR1, 0);
+
+	/* clear hi master address */
+	out8 (IIC_HMADR1, 0);
+
+	/* clear lo slave address */
+	out8 (IIC_LSADR1, 0);
+
+	/* clear hi slave address */
+	out8 (IIC_HSADR1, 0);
+
+	/* Clock divide Register */
+	/* get OPB frequency */
+	get_sys_info (&sysInfo);
+	freqOPB = sysInfo.freqPLB / sysInfo.pllOpbDiv;
+	/* set divisor according to freqOPB */
+	divisor = (freqOPB - 1) / 10000000;
+	if (divisor == 0)
+		divisor = 1;
+	out8 (IIC_CLKDIV1, divisor);
+
+	/* no interrupts */
+	out8 (IIC_INTRMSK1, 0);
+
+	/* clear transfer count */
+	out8 (IIC_XFRCNT1, 0);
+
+	/* clear extended control & stat */
+	/* write 1 in SRC SRS SWC SWS to clear these fields */
+	out8 (IIC_XTCNTLSS1, 0xF0);
+
+	/* Mode Control Register
+	   Flush Slave/Master data buffer */
+	out8 (IIC_MDCNTL1, IIC_MDCNTL_FSDB | IIC_MDCNTL_FMDB);
+	__asm__ volatile ("eieio");
+
+
+	val = in8(IIC_MDCNTL1);
+	__asm__ volatile ("eieio");
+
+	/* Ignore General Call, slave transfers are ignored,
+	   disable interrupts, exit unknown bus state, enable hold
+	   SCL
+	   100kHz normaly or FastMode for 400kHz and above
+	*/
+
+	val |= IIC_MDCNTL_EUBS|IIC_MDCNTL_HSCL;
+	if( speed >= 400000 ){
+		val |= IIC_MDCNTL_FSM;
+	}
+	out8 (IIC_MDCNTL1, val);
+
+	/* clear control reg */
+	out8 (IIC_CNTL1, 0x00);
+	__asm__ volatile ("eieio");
+
+}
+
+/*
+  This code tries to use the features of the 405GP i2c
+  controller. It will transfer up to 4 bytes in one pass
+  on the loop. It only does out8(lbz) to the buffer when it
+  is possible to do out16(lhz) transfers.
+
+  cmd_type is 0 for write 1 for read.
+
+  addr_len can take any value from 0-255, it is only limited
+  by the char, we could make it larger if needed. If it is
+  0 we skip the address write cycle.
+
+  Typical case is a Write of an addr followd by a Read. The
+  IBM FAQ does not cover this. On the last byte of the write
+  we don't set the creg CHT bit, and on the first bytes of the
+  read we set the RPST bit.
+
+  It does not support address only transfers, there must be
+  a data part. If you want to write the address yourself, put
+  it in the data pointer.
+
+  It does not support transfer to/from address 0.
+
+  It does not check XFRCNT.
+*/
+static
+int i2c_transfer1(unsigned char cmd_type,
+		  unsigned char chip,
+		  unsigned char addr[],
+		  unsigned char addr_len,
+		  unsigned char data[],
+		  unsigned short data_len )
+{
+	unsigned char* ptr;
+	int reading;
+	int tran,cnt;
+	int result;
+	int status;
+	int i;
+	uchar creg;
+
+	if( data == 0 || data_len == 0 ){
+		/*Don't support data transfer of no length or to address 0*/
+		printf( "i2c_transfer: bad call\n" );
+		return IIC_NOK;
+	}
+	if( addr && addr_len ){
+		ptr = addr;
+		cnt = addr_len;
+		reading = 0;
+	}else{
+		ptr = data;
+		cnt = data_len;
+		reading = cmd_type;
+	}
+
+	/*Clear Stop Complete Bit*/
+	out8(IIC_STS1,IIC_STS_SCMP);
+	/* Check init */
+	i=10;
+	do {
+		/* Get status */
+		status = in8(IIC_STS1);
+		__asm__ volatile("eieio");
+		i--;
+	} while ((status & IIC_STS_PT) && (i>0));
+
+	if (status & IIC_STS_PT) {
+		result = IIC_NOK_TOUT;
+		return(result);
+	}
+	/*flush the Master/Slave Databuffers*/
+	out8(IIC_MDCNTL1, ((in8(IIC_MDCNTL1))|IIC_MDCNTL_FMDB|IIC_MDCNTL_FSDB));
+	/*need to wait 4 OPB clocks? code below should take that long*/
+
+	/* 7-bit adressing */
+	out8(IIC_HMADR1,0);
+	out8(IIC_LMADR1, chip);
+	__asm__ volatile("eieio");
+
+	tran = 0;
+	result = IIC_OK;
+	creg = 0;
+
+	while ( tran != cnt && (result == IIC_OK)) {
+		int  bc,j;
+
+		/* Control register =
+		   Normal transfer, 7-bits adressing, Transfer up to bc bytes, Normal start,
+		   Transfer is a sequence of transfers
+		*/
+		creg |= IIC_CNTL_PT;
+
+		bc = (cnt - tran) > 4 ? 4 :
+			cnt - tran;
+		creg |= (bc-1)<<4;
+		/* if the real cmd type is write continue trans*/
+		if ( (!cmd_type && (ptr == addr)) || ((tran+bc) != cnt) )
+			creg |= IIC_CNTL_CHT;
+
+		if (reading)
+			creg |= IIC_CNTL_READ;
+		else {
+			for(j=0; j<bc; j++) {
+				/* Set buffer */
+				out8(IIC_MDBUF1,ptr[tran+j]);
+				__asm__ volatile("eieio");
+			}
+		}
+		out8(IIC_CNTL1, creg );
+		__asm__ volatile("eieio");
+
+		/* Transfer is in progress
+		   we have to wait for upto 5 bytes of data
+		   1 byte chip address+r/w bit then bc bytes
+		   of data.
+		   udelay(10) is 1 bit time at 100khz
+		   Doubled for slop. 20 is too small.
+		*/
+		i=2*5*8;
+		do {
+			/* Get status */
+			status = in8(IIC_STS1);
+			__asm__ volatile("eieio");
+			udelay (10);
+			i--;
+		} while ((status & IIC_STS_PT) && !(status & IIC_STS_ERR)
+			 && (i>0));
+
+		if (status & IIC_STS_ERR) {
+			result = IIC_NOK;
+			status = in8 (IIC_EXTSTS1);
+			/* Lost arbitration? */
+			if (status & IIC_EXTSTS_LA)
+				result = IIC_NOK_LA;
+			/* Incomplete transfer? */
+			if (status & IIC_EXTSTS_ICT)
+				result = IIC_NOK_ICT;
+			/* Transfer aborted? */
+			if (status & IIC_EXTSTS_XFRA)
+				result = IIC_NOK_XFRA;
+		} else if ( status & IIC_STS_PT) {
+			result = IIC_NOK_TOUT;
+		}
+		/* Command is reading => get buffer */
+		if ((reading) && (result == IIC_OK)) {
+			/* Are there data in buffer */
+			if (status & IIC_STS_MDBS) {
+				/*
+				  even if we have data we have to wait 4OPB clocks
+				  for it to hit the front of the FIFO, after that
+				  we can just read. We should check XFCNT here and
+				  if the FIFO is full there is no need to wait.
+				*/
+				udelay (1);
+				for(j=0;j<bc;j++) {
+					ptr[tran+j] = in8(IIC_MDBUF1);
+					__asm__ volatile("eieio");
+				}
+			} else
+				result = IIC_NOK_DATA;
+		}
+		creg = 0;
+		tran+=bc;
+		if( ptr == addr && tran == cnt ) {
+			ptr = data;
+			cnt = data_len;
+			tran = 0;
+			reading = cmd_type;
+			if( reading )
+				creg = IIC_CNTL_RPST;
+		}
+	}
+	return (result);
+}
+
+int i2c_probe1 (uchar chip)
+{
+	uchar buf[1];
+
+	buf[0] = 0;
+
+	/*
+	 * What is needed is to send the chip address and verify that the
+	 * address was <ACK>ed (i.e. there was a chip at that address which
+	 * drove the data line low).
+	 */
+	return(i2c_transfer1 (1, chip << 1, 0,0, buf, 1) != 0);
+}
+
+
+int i2c_read1 (uchar chip, uint addr, int alen, uchar * buffer, int len)
+{
+	uchar xaddr[4];
+	int ret;
+
+	if ( alen > 4 ) {
+		printf ("I2C read: addr len %d not supported\n", alen);
+		return 1;
+	}
+
+	if ( alen > 0 ) {
+		xaddr[0] = (addr >> 24) & 0xFF;
+		xaddr[1] = (addr >> 16) & 0xFF;
+		xaddr[2] = (addr >> 8) & 0xFF;
+		xaddr[3] = addr & 0xFF;
+	}
+
+
+#ifdef CFG_I2C_EEPROM_ADDR_OVERFLOW
+	/*
+	 * EEPROM chips that implement "address overflow" are ones
+	 * like Catalyst 24WC04/08/16 which has 9/10/11 bits of
+	 * address and the extra bits end up in the "chip address"
+	 * bit slots. This makes a 24WC08 (1Kbyte) chip look like
+	 * four 256 byte chips.
+	 *
+	 * Note that we consider the length of the address field to
+	 * still be one byte because the extra address bits are
+	 * hidden in the chip address.
+	 */
+	if( alen > 0 )
+		chip |= ((addr >> (alen * 8)) & CFG_I2C_EEPROM_ADDR_OVERFLOW);
+#endif
+	if( (ret = i2c_transfer1( 1, chip<<1, &xaddr[4-alen], alen, buffer, len )) != 0) {
+		printf( "I2c read: failed %d\n", ret);
+		return 1;
+	}
+	return 0;
+}
+
+int i2c_write1 (uchar chip, uint addr, int alen, uchar * buffer, int len)
+{
+	uchar xaddr[4];
+
+	if ( alen > 4 ) {
+		printf ("I2C write: addr len %d not supported\n", alen);
+		return 1;
+
+	}
+	if ( alen > 0 ) {
+		xaddr[0] = (addr >> 24) & 0xFF;
+		xaddr[1] = (addr >> 16) & 0xFF;
+		xaddr[2] = (addr >> 8) & 0xFF;
+		xaddr[3] = addr & 0xFF;
+	}
+
+#ifdef CFG_I2C_EEPROM_ADDR_OVERFLOW
+	/*
+	 * EEPROM chips that implement "address overflow" are ones
+	 * like Catalyst 24WC04/08/16 which has 9/10/11 bits of
+	 * address and the extra bits end up in the "chip address"
+	 * bit slots. This makes a 24WC08 (1Kbyte) chip look like
+	 * four 256 byte chips.
+	 *
+	 * Note that we consider the length of the address field to
+	 * still be one byte because the extra address bits are
+	 * hidden in the chip address.
+	 */
+	if( alen > 0 )
+		chip |= ((addr >> (alen * 8)) & CFG_I2C_EEPROM_ADDR_OVERFLOW);
+#endif
+
+	return (i2c_transfer1( 0, chip<<1, &xaddr[4-alen], alen, buffer, len ) != 0);
+}
+
+/*-----------------------------------------------------------------------
+ * Read a register
+ */
+uchar i2c_reg_read1(uchar i2c_addr, uchar reg)
+{
+	char buf;
+
+	i2c_read1(i2c_addr, reg, 1, &buf, 1);
+
+	return(buf);
+}
+
+/*-----------------------------------------------------------------------
+ * Write a register
+ */
+void i2c_reg_write1(uchar i2c_addr, uchar reg, uchar val)
+{
+	i2c_write1(i2c_addr, reg, 1, &val, 1);
+}
+
+
+int do_i2c1_probe(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	int j;
+#if defined(CFG_I2C_NOPROBES)
+	int k, skip;
+#endif
+
+	puts ("Valid chip addresses:");
+	for(j = 0; j < 128; j++) {
+#if defined(CFG_I2C_NOPROBES)
+		skip = 0;
+		for (k = 0; k < sizeof(i2c_no_probes); k++){
+			if (j == i2c_no_probes[k]){
+				skip = 1;
+				break;
+			}
+		}
+		if (skip)
+			continue;
+#endif
+		if(i2c_probe1(j) == 0) {
+			printf(" %02X", j);
+		}
+	}
+	putc ('\n');
+
+#if defined(CFG_I2C_NOPROBES)
+	puts ("Excluded chip addresses:");
+	for( k = 0; k < sizeof(i2c_no_probes); k++ )
+		printf(" %02X", i2c_no_probes[k] );
+	putc ('\n');
+#endif
+
+	return 0;
+}
+
+U_BOOT_CMD(
+	iprobe1,	1,	1,	do_i2c1_probe,
+	"iprobe1  - probe to discover valid I2C chip addresses\n",
+	"\n    -discover valid I2C chip addresses\n"
+);
+
+#endif
+
diff --git a/board/sandburst/common/ppc440gx_i2c.h b/board/sandburst/common/ppc440gx_i2c.h
new file mode 100644
index 0000000..e25a3171
--- /dev/null
+++ b/board/sandburst/common/ppc440gx_i2c.h
@@ -0,0 +1,67 @@
+/*
+ *  Copyright (C) 2005 Sandburst Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Ported from i2c driver for ppc4xx by AS HARNOIS by
+ * Travis B. Sawyer
+ * Sandburst Corporation
+ */
+#include <common.h>
+#include <ppc4xx.h>
+#if defined(CONFIG_440)
+#   include <440_i2c.h>
+#else
+#   include <405gp_i2c.h>
+#endif
+#include <i2c.h>
+
+
+#ifdef CONFIG_HARD_I2C
+
+
+
+#define I2C_BUS1_BASE_ADDR (CFG_PERIPHERAL_BASE + 0x00000500)
+#define	   I2C_REGISTERS_BUS1_BASE_ADDRESS I2C_BUS1_BASE_ADDR
+#define    IIC_MDBUF1	(I2C_REGISTERS_BUS1_BASE_ADDRESS+IICMDBUF)
+#define    IIC_SDBUF1	(I2C_REGISTERS_BUS1_BASE_ADDRESS+IICSDBUF)
+#define    IIC_LMADR1	(I2C_REGISTERS_BUS1_BASE_ADDRESS+IICLMADR)
+#define    IIC_HMADR1	(I2C_REGISTERS_BUS1_BASE_ADDRESS+IICHMADR)
+#define    IIC_CNTL1	(I2C_REGISTERS_BUS1_BASE_ADDRESS+IICCNTL)
+#define    IIC_MDCNTL1	(I2C_REGISTERS_BUS1_BASE_ADDRESS+IICMDCNTL)
+#define    IIC_STS1	(I2C_REGISTERS_BUS1_BASE_ADDRESS+IICSTS)
+#define    IIC_EXTSTS1	(I2C_REGISTERS_BUS1_BASE_ADDRESS+IICEXTSTS)
+#define    IIC_LSADR1	(I2C_REGISTERS_BUS1_BASE_ADDRESS+IICLSADR)
+#define    IIC_HSADR1	(I2C_REGISTERS_BUS1_BASE_ADDRESS+IICHSADR)
+#define    IIC_CLKDIV1	(I2C_REGISTERS_BUS1_BASE_ADDRESS+IICCLKDIV)
+#define    IIC_INTRMSK1	(I2C_REGISTERS_BUS1_BASE_ADDRESS+IICINTRMSK)
+#define    IIC_XFRCNT1	(I2C_REGISTERS_BUS1_BASE_ADDRESS+IICXFRCNT)
+#define    IIC_XTCNTLSS1	(I2C_REGISTERS_BUS1_BASE_ADDRESS+IICXTCNTLSS)
+#define    IIC_DIRECTCNTL1 (I2C_REGISTERS_BUS1_BASE_ADDRESS+IICDIRECTCNTL)
+
+void i2c1_init (int speed, int slaveadd);
+int i2c_probe1 (uchar chip);
+int i2c_read1 (uchar chip, uint addr, int alen, uchar * buffer, int len);
+int i2c_write1 (uchar chip, uint addr, int alen, uchar * buffer, int len);
+uchar i2c_reg_read1(uchar i2c_addr, uchar reg);
+void i2c_reg_write1(uchar i2c_addr, uchar reg, uchar val);
+
+#endif
diff --git a/board/sandburst/common/sb_common.c b/board/sandburst/common/sb_common.c
new file mode 100644
index 0000000..1251bc9
--- /dev/null
+++ b/board/sandburst/common/sb_common.c
@@ -0,0 +1,451 @@
+/*
+ *  Copyright (C) 2005 Sandburst Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <config.h>
+#include <common.h>
+#include <command.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <spd_sdram.h>
+#include <i2c.h>
+#include "ppc440gx_i2c.h"
+#include "sb_common.h"
+
+long int fixed_sdram (void);
+
+/*************************************************************************
+ *  metrobox_get_master
+ *
+ *  PRI_N - active low signal.  If the GPIO pin is low we are the master
+ *
+ ************************************************************************/
+int sbcommon_get_master(void)
+{
+	ppc440_gpio_regs_t *gpio_regs;
+
+	gpio_regs = (ppc440_gpio_regs_t *)CFG_GPIO_BASE;
+
+	if (gpio_regs->in & SBCOMMON_GPIO_PRI_N) {
+		return 0;
+	}
+	else {
+		return 1;
+	}
+}
+
+/*************************************************************************
+ *  metrobox_secondary_present
+ *
+ *  Figure out if secondary/slave board is present
+ *
+ ************************************************************************/
+int sbcommon_secondary_present(void)
+{
+	ppc440_gpio_regs_t *gpio_regs;
+
+	gpio_regs = (ppc440_gpio_regs_t *)CFG_GPIO_BASE;
+
+	if (gpio_regs->in & SBCOMMON_GPIO_SEC_PRES)
+		return 0;
+	else
+		return 1;
+}
+
+/*************************************************************************
+ *  sbcommon_get_serial_number
+ *
+ *  Retrieve the board serial number via the mac address in eeprom
+ *
+ ************************************************************************/
+unsigned short sbcommon_get_serial_number(void)
+{
+	unsigned char buff[0x100];
+	unsigned short sernum;
+
+	/* Get the board serial number from eeprom */
+        /* Initialize I2C */
+	i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+
+	/* Read 256 bytes in EEPROM */
+	i2c_read (0x50, 0, 1, buff, 0x100);
+
+	memcpy(&sernum, &buff[0xF4], 2);
+	sernum /= 32;
+
+	return (sernum);
+}
+
+/*************************************************************************
+ *  sbcommon_fans
+ *
+ *  Spin up fans 2 & 3 to get some air moving.  OS will take care
+ *  of the rest.  This is mostly a precaution...
+ *
+ *  Assumes i2c bus 1 is ready.
+ *
+ ************************************************************************/
+void sbcommon_fans(void)
+{
+	/*
+	 * Attempt to turn on 2 of the fans...
+	 * Need to go through the bridge
+	 */
+	puts ("FANS:  ");
+
+	/* select fan4 through the bridge */
+	i2c_reg_write1(0x73, /* addr */
+		       0x00, /* reg */
+		       0x08); /* val = bus 4 */
+
+	/* Turn on FAN 4 */
+	i2c_reg_write1(0x2e,
+		       1,
+		       0x80);
+
+	i2c_reg_write1(0x2e,
+		       0,
+		       0x19);
+
+	/* Deselect bus 4 on the bridge */
+	i2c_reg_write1(0x73,
+		       0x00,
+		       0x00);
+
+	/* select fan3 through the bridge */
+	i2c_reg_write1(0x73, /* addr */
+		       0x00, /* reg */
+		       0x04); /* val = bus 3 */
+
+	/* Turn on FAN 3 */
+	i2c_reg_write1(0x2e,
+		       1,
+		       0x80);
+
+	i2c_reg_write1(0x2e,
+		       0,
+		       0x19);
+
+	/* Deselect bus 3 on the bridge */
+	i2c_reg_write1(0x73,
+		       0x00,
+		       0x00);
+
+	/* select fan2 through the bridge */
+	i2c_reg_write1(0x73, /* addr */
+		       0x00, /* reg */
+		       0x02); /* val = bus 4 */
+
+	/* Turn on FAN 2 */
+	i2c_reg_write1(0x2e,
+		       1,
+		       0x80);
+
+	i2c_reg_write1(0x2e,
+		       0,
+		       0x19);
+
+	/* Deselect bus 2 on the bridge */
+	i2c_reg_write1(0x73,
+		       0x00,
+		       0x00);
+
+	/* select fan1 through the bridge */
+	i2c_reg_write1(0x73, /* addr */
+		       0x00, /* reg */
+		       0x01); /* val = bus 0 */
+
+	/* Turn on FAN 1 */
+	i2c_reg_write1(0x2e,
+		       1,
+		       0x80);
+
+	i2c_reg_write1(0x2e,
+		       0,
+		       0x19);
+
+	/* Deselect bus 1 on the bridge */
+	i2c_reg_write1(0x73,
+		       0x00,
+		       0x00);
+
+	puts ("on\n");
+
+	return;
+
+}
+
+/*************************************************************************
+ *  initdram
+ *
+ *  Initialize sdram
+ *
+ ************************************************************************/
+long int initdram (int board_type)
+{
+	long dram_size = 0;
+
+#if defined(CONFIG_SPD_EEPROM)
+	dram_size = spd_sdram (0);
+#else
+	dram_size = fixed_sdram ();
+#endif
+	return dram_size;
+}
+
+
+/*************************************************************************
+ *  testdram
+ *
+ *
+ ************************************************************************/
+#if defined(CFG_DRAM_TEST)
+int testdram (void)
+{
+	uint *pstart = (uint *) CFG_MEMTEST_START;
+	uint *pend = (uint *) CFG_MEMTEST_END;
+	uint *p;
+
+	printf("Testing SDRAM: ");
+	for (p = pstart; p < pend; p++)
+		*p = 0xaaaaaaaa;
+
+	for (p = pstart; p < pend; p++) {
+		if (*p != 0xaaaaaaaa) {
+			printf ("SDRAM test fails at: %08x\n", (uint) p);
+			return 1;
+		}
+	}
+
+	for (p = pstart; p < pend; p++)
+		*p = 0x55555555;
+
+	for (p = pstart; p < pend; p++) {
+		if (*p != 0x55555555) {
+			printf ("SDRAM test fails at: %08x\n", (uint) p);
+			return 1;
+		}
+	}
+
+	printf("OK\n");
+	return 0;
+}
+#endif
+
+#if !defined(CONFIG_SPD_EEPROM)
+/*************************************************************************
+ *  fixed sdram init -- doesn't use serial presence detect.
+ *
+ *  Assumes:    128 MB, non-ECC, non-registered
+ *              PLB @ 133 MHz
+ *
+ ************************************************************************/
+long int fixed_sdram (void)
+{
+	uint reg;
+
+	/*--------------------------------------------------------------------
+	 * Setup some default
+	 *------------------------------------------------------------------*/
+	mtsdram (mem_uabba, 0x00000000);	/* ubba=0 (default)             */
+	mtsdram (mem_slio, 0x00000000);		/* rdre=0 wrre=0 rarw=0         */
+	mtsdram (mem_devopt, 0x00000000);	/* dll=0 ds=0 (normal)          */
+	mtsdram (mem_wddctr, 0x00000000);	/* wrcp=0 dcd=0                 */
+	mtsdram (mem_clktr, 0x40000000);	/* clkp=1 (90 deg wr) dcdt=0    */
+
+	/*--------------------------------------------------------------------
+	 * Setup for board-specific specific mem
+	 *------------------------------------------------------------------*/
+	/*
+	 * Following for CAS Latency = 2.5 @ 133 MHz PLB
+	 */
+	mtsdram (mem_b0cr, 0x000a4001);	/* SDBA=0x000 128MB, Mode 3, enabled */
+	mtsdram (mem_tr0, 0x410a4012);	/* WR=2  WD=1 CL=2.5 PA=3 CP=4 LD=2 */
+	/* RA=10 RD=3                       */
+	mtsdram (mem_tr1, 0x8080082f);	/* SS=T2 SL=STAGE 3 CD=1 CT=0x02f   */
+	mtsdram (mem_rtr, 0x08200000);	/* Rate 15.625 ns @ 133 MHz PLB     */
+	mtsdram (mem_cfg1, 0x00000000);	/* Self-refresh exit, disable PM    */
+	udelay (400);			/* Delay 200 usecs (min)            */
+
+	/*--------------------------------------------------------------------
+	 * Enable the controller, then wait for DCEN to complete
+	 *------------------------------------------------------------------*/
+	mtsdram (mem_cfg0, 0x86000000);	/* DCEN=1, PMUD=1, 64-bit           */
+	for (;;) {
+		mfsdram (mem_mcsts, reg);
+		if (reg & 0x80000000)
+			break;
+	}
+
+	return (128 * 1024 * 1024);	/* 128 MB                           */
+}
+#endif	/* !defined(CONFIG_SPD_EEPROM) */
+
+
+/*************************************************************************
+ *  pci_pre_init
+ *
+ *  This routine is called just prior to registering the hose and gives
+ *  the board the opportunity to check things. Returning a value of zero
+ *  indicates that things are bad & PCI initialization should be aborted.
+ *
+ *	Different boards may wish to customize the pci controller structure
+ *	(add regions, override default access routines, etc) or perform
+ *	certain pre-initialization actions.
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT)
+int pci_pre_init(struct pci_controller * hose )
+{
+	unsigned long strap;
+
+	/*--------------------------------------------------------------------------+
+	 *	The metrobox is always configured as the host & requires the
+	 *	PCI arbiter to be enabled.
+	 *--------------------------------------------------------------------------*/
+	mfsdr(sdr_sdstp1, strap);
+	if( (strap & SDR0_SDSTP1_PAE_MASK) == 0 ){
+		printf("PCI: SDR0_STRP1[%08lX] - PCI Arbiter disabled.\n",strap);
+		return 0;
+	}
+
+	return 1;
+}
+#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */
+
+/*************************************************************************
+ *  pci_target_init
+ *
+ *	The bootstrap configuration provides default settings for the pci
+ *	inbound map (PIM). But the bootstrap config choices are limited and
+ *	may not be sufficient for a given board.
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
+void pci_target_init(struct pci_controller * hose )
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	/*--------------------------------------------------------------------------+
+	 * Disable everything
+	 *--------------------------------------------------------------------------*/
+	out32r( PCIX0_PIM0SA, 0 ); /* disable */
+	out32r( PCIX0_PIM1SA, 0 ); /* disable */
+	out32r( PCIX0_PIM2SA, 0 ); /* disable */
+	out32r( PCIX0_EROMBA, 0 ); /* disable expansion rom */
+
+	/*--------------------------------------------------------------------------+
+	 * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping
+	 * options to not support sizes such as 128/256 MB.
+	 *--------------------------------------------------------------------------*/
+	out32r( PCIX0_PIM0LAL, CFG_SDRAM_BASE );
+	out32r( PCIX0_PIM0LAH, 0 );
+	out32r( PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1 );
+
+	out32r( PCIX0_BAR0, 0 );
+
+	/*--------------------------------------------------------------------------+
+	 * Program the board's subsystem id/vendor id
+	 *--------------------------------------------------------------------------*/
+	out16r( PCIX0_SBSYSVID, CFG_PCI_SUBSYS_VENDORID );
+	out16r( PCIX0_SBSYSID, CFG_PCI_SUBSYS_DEVICEID );
+
+	out16r( PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY );
+}
+#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
+
+
+/*************************************************************************
+ *  is_pci_host
+ *
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI)
+int is_pci_host(struct pci_controller *hose)
+{
+    /* The metrobox is always configured as host. */
+    return(1);
+}
+#endif /* defined(CONFIG_PCI) */
+
+/*************************************************************************
+ *  board_get_enetaddr
+ *
+ *  Get the ethernet MAC address for the management ethernet from the
+ *  strap EEPROM.  Note that is the BASE address for the range of
+ *  external ethernet MACs on the board.  The base + 31 is the actual
+ *  mgmt mac address.
+ *
+ ************************************************************************/
+static int macaddr_idx = 0;
+
+void board_get_enetaddr (uchar * enet)
+{
+	int i;
+	unsigned short tmp;
+	unsigned char buff[0x100], *cp;
+
+	if (0 == macaddr_idx) {
+
+		/* Initialize I2C */
+		i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+
+		/* Read 256 bytes in EEPROM */
+		i2c_read (0x50, 0, 1, buff, 0x100);
+
+		cp = &buff[0xF0];
+
+		for (i = 0; i < 6; i++,cp++)
+			enet[i] = *cp;
+
+		memcpy(&tmp, &enet[4], 2);
+		tmp += 31;
+		memcpy(&enet[4], &tmp, 2);
+
+		macaddr_idx++;
+	} else {
+		enet[0] = 0x02;
+		enet[1] = 0x00;
+		enet[2] = 0x00;
+		enet[3] = 0x00;
+		enet[4] = 0x00;
+		if (1 == sbcommon_get_master() ) {
+			/* Master/Primary card */
+			enet[5] = 0x01;
+		} else {
+			/* Slave/Secondary card */
+			enet [5] = 0x02;
+		}
+	}
+
+	return;
+}
+
+#ifdef CONFIG_POST
+/*
+ * Returns 1 if keys pressed to start the power-on long-running tests
+ * Called from board_init_f().
+ */
+int post_hotkeys_pressed(void)
+{
+
+	return (ctrlc());
+}
+#endif
diff --git a/board/sandburst/common/sb_common.h b/board/sandburst/common/sb_common.h
new file mode 100644
index 0000000..8994e42
--- /dev/null
+++ b/board/sandburst/common/sb_common.h
@@ -0,0 +1,83 @@
+#ifndef __SBCOMMON_H__
+#define __SBCOMMON_H__
+/*
+ *  Copyright (C) 2005 Sandburst Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <config.h>
+#include <common.h>
+#include <command.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <spd_sdram.h>
+#include <i2c.h>
+#include "ppc440gx_i2c.h"
+
+
+
+
+/*
+ * GPIO Settings
+ */
+/* Chassis settings */
+#define SBCOMMON_GPIO_PRI_N             0x00001000  /* 0 = Chassis Master, 1 = Slave */
+#define SBCOMMON_GPIO_SEC_PRES          0x00000800  /* 1 = Other board present */
+
+/* Debug LEDs */
+#define SBCOMMON_GPIO_DBGLED_0          0x00000400
+#define SBCOMMON_GPIO_DBGLED_1          0x00000200
+#define SBCOMMON_GPIO_DBGLED_2          0x00100000
+#define SBCOMMON_GPIO_DBGLED_3          0x00000100
+
+#define SBCOMMON_GPIO_DBGLEDS           (SBCOMMON_GPIO_DBGLED_0 | \
+                                         SBCOMMON_GPIO_DBGLED_1 | \
+                                         SBCOMMON_GPIO_DBGLED_2 | \
+                                         SBCOMMON_GPIO_DBGLED_3)
+
+#define SBCOMMON_GPIO_SYS_FAULT         0x00000080
+#define SBCOMMON_GPIO_SYS_OTEMP         0x00000040
+#define SBCOMMON_GPIO_SYS_STATUS        0x00000020
+
+#define SBCOMMON_GPIO_SYS_LEDS          (SBCOMMON_GPIO_SYS_STATUS)
+
+#define SBCOMMON_GPIO_LEDS              (SBCOMMON_GPIO_DBGLED_0 | \
+                                         SBCOMMON_GPIO_DBGLED_1 | \
+                                         SBCOMMON_GPIO_DBGLED_2 | \
+                                         SBCOMMON_GPIO_DBGLED_3 | \
+                                         SBCOMMON_GPIO_SYS_STATUS)
+
+typedef struct ppc440_gpio_regs {
+	volatile unsigned long out;
+	volatile unsigned long tri_state;
+	volatile unsigned long dummy[4];
+	volatile unsigned long open_drain;
+	volatile unsigned long in;
+}  __attribute__((packed)) ppc440_gpio_regs_t;
+
+
+
+
+int sbcommon_get_master(void);
+int sbcommon_secondary_present(void);
+unsigned short sbcommon_get_serial_number(void);
+void sbcommon_fans(void);
+
+
+#endif /* __SBCOMMON_H__ */
diff --git a/board/sandburst/karef/Makefile b/board/sandburst/karef/Makefile
new file mode 100644
index 0000000..8b3173c
--- /dev/null
+++ b/board/sandburst/karef/Makefile
@@ -0,0 +1,59 @@
+#
+# (C) Copyright 2005
+# Sandburst Corporation
+# Travis B. Sawyer
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+# TBS: add for debugging purposes
+BUILDUSER := $(shell whoami)
+FORCEBUILD := $(shell rm -f $(LIB) $(BOARD).o)
+
+CFLAGS += -DBUILDUSER='"$(BUILDUSER)"'
+# TBS: end debugging
+
+
+LIB	= lib$(BOARD).a
+
+OBJS	= $(BOARD).o ../common/flash.o ../common/ppc440gx_i2c.o \
+	../common/sb_common.o
+
+SOBJS	= init.o
+
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) crv $@ $(OBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend *~
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
diff --git a/board/sandburst/karef/config.mk b/board/sandburst/karef/config.mk
new file mode 100644
index 0000000..65c1e48
--- /dev/null
+++ b/board/sandburst/karef/config.mk
@@ -0,0 +1,43 @@
+#
+# (C) Copyright 2005
+# Sandburst Corporation
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# Sandburst Corporation Metrobox Reference Design
+# Travis B. Sawyer
+#
+
+ifeq ($(ramsym),1)
+TEXT_BASE = 0x07FD0000
+else
+TEXT_BASE = 0xFFF80000
+endif
+
+PLATFORM_CPPFLAGS += -DCONFIG_440=1
+
+ifeq ($(debug),1)
+PLATFORM_CPPFLAGS += -DDEBUG
+endif
+
+ifeq ($(dbcr),1)
+PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
+endif
diff --git a/board/sandburst/karef/hal_ka_of_auto.h b/board/sandburst/karef/hal_ka_of_auto.h
new file mode 100644
index 0000000..cc501c9
--- /dev/null
+++ b/board/sandburst/karef/hal_ka_of_auto.h
@@ -0,0 +1,324 @@
+/* ****************************************************************
+ * Common defs for reg spec for chip ka_of
+ * Auto-generated by trex2: DO NOT HAND-EDIT!!
+ * ****************************************************************
+ */
+
+#ifndef HAL_KA_OF_AUTO_H
+#define HAL_KA_OF_AUTO_H
+
+
+/* ----------------------------------------------------------------
+ * For block: 'ofem'
+ */
+
+/* ---- Block instance addressing (for block-select) */
+#define OFEM_BLOCK_ADDR_BIT_L 6
+#define OFEM_BLOCK_ADDR_BIT_H 9
+#define OFEM_BLOCK_ADDR_WIDTH 4
+
+#define  OFEM_ADDR  0x0
+
+/* ---- Reg addressing (within block) */
+#define OFEM_REG_ADDR_BIT_L 2
+#define OFEM_REG_ADDR_BIT_H 5
+#define OFEM_REG_ADDR_WIDTH 4
+
+
+/* ================================================================
+ * ---- Register KA_OF_OFEM_REVISION */
+#define SAND_HAL_KA_OF_OFEM_REVISION_OFFSET    0x000
+#ifndef SAND_HAL_KA_OF_OFEM_REVISION_NO_TEST_MASK
+#define SAND_HAL_KA_OF_OFEM_REVISION_NO_TEST_MASK    0x000
+#endif
+#define SAND_HAL_KA_OF_OFEM_REVISION_MASK    0xffffffff
+#define SAND_HAL_KA_OF_OFEM_REVISION_MSB     31
+#define SAND_HAL_KA_OF_OFEM_REVISION_LSB      0
+
+/* ================================================================
+ * ---- Register KA_OF_OFEM_RESET */
+#define SAND_HAL_KA_OF_OFEM_RESET_OFFSET    0x004
+#ifndef SAND_HAL_KA_OF_OFEM_RESET_NO_TEST_MASK
+#define SAND_HAL_KA_OF_OFEM_RESET_NO_TEST_MASK    0x000
+#endif
+#define SAND_HAL_KA_OF_OFEM_RESET_MASK    0xffffffff
+#define SAND_HAL_KA_OF_OFEM_RESET_MSB     31
+#define SAND_HAL_KA_OF_OFEM_RESET_LSB      0
+
+/* ================================================================
+ * ---- Register KA_OF_OFEM_CNTL */
+#define SAND_HAL_KA_OF_OFEM_CNTL_OFFSET    0x018
+#ifndef SAND_HAL_KA_OF_OFEM_CNTL_NO_TEST_MASK
+#define SAND_HAL_KA_OF_OFEM_CNTL_NO_TEST_MASK    0x000
+#endif
+#define SAND_HAL_KA_OF_OFEM_CNTL_MASK    0xffffffff
+#define SAND_HAL_KA_OF_OFEM_CNTL_MSB     31
+#define SAND_HAL_KA_OF_OFEM_CNTL_LSB      0
+
+/* ================================================================
+ * ---- Register KA_OF_OFEM_MAC_FLOW_CTL */
+#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_OFFSET    0x01c
+#ifndef SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_NO_TEST_MASK
+#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_NO_TEST_MASK    0x000
+#endif
+#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_MASK    0xffffffff
+#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_MSB     31
+#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_LSB      0
+
+/* ================================================================
+ * ---- Register KA_OF_OFEM_INTERRUPT */
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_OFFSET    0x008
+#ifndef SAND_HAL_KA_OF_OFEM_INTERRUPT_NO_TEST_MASK
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_NO_TEST_MASK    0x000
+#endif
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK    0xffffffff
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MSB     31
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_LSB      0
+
+/* ================================================================
+ * ---- Register KA_OF_OFEM_INTERRUPT_MASK */
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_OFFSET    0x00c
+#ifndef SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_NO_TEST_MASK
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_NO_TEST_MASK    0x000
+#endif
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MASK    0xffffffff
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MSB     31
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_LSB      0
+
+/* ================================================================
+ * ---- Register KA_OF_OFEM_SCRATCH */
+#define SAND_HAL_KA_OF_OFEM_SCRATCH_OFFSET    0x010
+#ifndef SAND_HAL_KA_OF_OFEM_SCRATCH_NO_TEST_MASK
+#define SAND_HAL_KA_OF_OFEM_SCRATCH_NO_TEST_MASK    0x000
+#endif
+#define SAND_HAL_KA_OF_OFEM_SCRATCH_MASK    0xffffffff
+#define SAND_HAL_KA_OF_OFEM_SCRATCH_MSB     31
+#define SAND_HAL_KA_OF_OFEM_SCRATCH_LSB      0
+
+/* ================================================================
+ * ---- Register KA_OF_OFEM_SCRATCH_MASK */
+#define SAND_HAL_KA_OF_OFEM_SCRATCH_MASK_OFFSET    0x014
+#ifndef SAND_HAL_KA_OF_OFEM_SCRATCH_MASK_NO_TEST_MASK
+#define SAND_HAL_KA_OF_OFEM_SCRATCH_MASK_NO_TEST_MASK    0x000
+#endif
+#define SAND_HAL_KA_OF_OFEM_SCRATCH_MASK_MASK    0xffffffff
+#define SAND_HAL_KA_OF_OFEM_SCRATCH_MASK_MSB     31
+#define SAND_HAL_KA_OF_OFEM_SCRATCH_MASK_LSB      0
+
+/* ================================================================
+ * Field info for register KA_OF_OFEM_REVISION */
+#define SAND_HAL_KA_OF_OFEM_REVISION_IDENTIFICATION_MASK    0x0000ff00
+#define SAND_HAL_KA_OF_OFEM_REVISION_IDENTIFICATION_SHIFT    8
+#define SAND_HAL_KA_OF_OFEM_REVISION_IDENTIFICATION_MSB    15
+#define SAND_HAL_KA_OF_OFEM_REVISION_IDENTIFICATION_LSB    8
+#define SAND_HAL_KA_OF_OFEM_REVISION_IDENTIFICATION_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_KA_OF_OFEM_REVISION_IDENTIFICATION_DEFAULT    0x00000024
+#define SAND_HAL_KA_OF_OFEM_REVISION_REVISION_MASK    0x000000ff
+#define SAND_HAL_KA_OF_OFEM_REVISION_REVISION_SHIFT    0
+#define SAND_HAL_KA_OF_OFEM_REVISION_REVISION_MSB    7
+#define SAND_HAL_KA_OF_OFEM_REVISION_REVISION_LSB    0
+#define SAND_HAL_KA_OF_OFEM_REVISION_REVISION_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_KA_OF_OFEM_REVISION_REVISION_DEFAULT    0x00000000
+
+/* ================================================================
+ * Field info for register KA_OF_OFEM_RESET */
+#define SAND_HAL_KA_OF_OFEM_RESET_I2C_MUX0_RESET_N_MASK    0x00000004
+#define SAND_HAL_KA_OF_OFEM_RESET_I2C_MUX0_RESET_N_SHIFT    2
+#define SAND_HAL_KA_OF_OFEM_RESET_I2C_MUX0_RESET_N_MSB    2
+#define SAND_HAL_KA_OF_OFEM_RESET_I2C_MUX0_RESET_N_LSB    2
+#define SAND_HAL_KA_OF_OFEM_RESET_I2C_MUX0_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_OF_OFEM_RESET_I2C_MUX0_RESET_N_DEFAULT    0x00000000
+#define SAND_HAL_KA_OF_OFEM_RESET_LOCH0_RESET_N_MASK    0x00000002
+#define SAND_HAL_KA_OF_OFEM_RESET_LOCH0_RESET_N_SHIFT    1
+#define SAND_HAL_KA_OF_OFEM_RESET_LOCH0_RESET_N_MSB    1
+#define SAND_HAL_KA_OF_OFEM_RESET_LOCH0_RESET_N_LSB    1
+#define SAND_HAL_KA_OF_OFEM_RESET_LOCH0_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_OF_OFEM_RESET_LOCH0_RESET_N_DEFAULT    0x00000000
+#define SAND_HAL_KA_OF_OFEM_RESET_MAC0_RESET_N_MASK    0x00000001
+#define SAND_HAL_KA_OF_OFEM_RESET_MAC0_RESET_N_SHIFT    0
+#define SAND_HAL_KA_OF_OFEM_RESET_MAC0_RESET_N_MSB    0
+#define SAND_HAL_KA_OF_OFEM_RESET_MAC0_RESET_N_LSB    0
+#define SAND_HAL_KA_OF_OFEM_RESET_MAC0_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_OF_OFEM_RESET_MAC0_RESET_N_DEFAULT    0x00000000
+
+/* ================================================================
+ * Field info for register KA_OF_OFEM_CNTL */
+#define SAND_HAL_KA_OF_OFEM_CNTL_TEMP_LED_MASK    0x000000c0
+#define SAND_HAL_KA_OF_OFEM_CNTL_TEMP_LED_SHIFT    6
+#define SAND_HAL_KA_OF_OFEM_CNTL_TEMP_LED_MSB    7
+#define SAND_HAL_KA_OF_OFEM_CNTL_TEMP_LED_LSB    6
+#define SAND_HAL_KA_OF_OFEM_CNTL_TEMP_LED_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_OF_OFEM_CNTL_TEMP_LED_DEFAULT    0x00000000
+#define SAND_HAL_KA_OF_OFEM_CNTL_FAULT_LED_MASK    0x00000030
+#define SAND_HAL_KA_OF_OFEM_CNTL_FAULT_LED_SHIFT    4
+#define SAND_HAL_KA_OF_OFEM_CNTL_FAULT_LED_MSB    5
+#define SAND_HAL_KA_OF_OFEM_CNTL_FAULT_LED_LSB    4
+#define SAND_HAL_KA_OF_OFEM_CNTL_FAULT_LED_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_OF_OFEM_CNTL_FAULT_LED_DEFAULT    0x00000000
+#define SAND_HAL_KA_OF_OFEM_CNTL_RS232_R_LED_MASK    0x0000000c
+#define SAND_HAL_KA_OF_OFEM_CNTL_RS232_R_LED_SHIFT    2
+#define SAND_HAL_KA_OF_OFEM_CNTL_RS232_R_LED_MSB    3
+#define SAND_HAL_KA_OF_OFEM_CNTL_RS232_R_LED_LSB    2
+#define SAND_HAL_KA_OF_OFEM_CNTL_RS232_R_LED_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_OF_OFEM_CNTL_RS232_R_LED_DEFAULT    0x00000000
+#define SAND_HAL_KA_OF_OFEM_CNTL_RS232_L_LED_MASK    0x00000003
+#define SAND_HAL_KA_OF_OFEM_CNTL_RS232_L_LED_SHIFT    0
+#define SAND_HAL_KA_OF_OFEM_CNTL_RS232_L_LED_MSB    1
+#define SAND_HAL_KA_OF_OFEM_CNTL_RS232_L_LED_LSB    0
+#define SAND_HAL_KA_OF_OFEM_CNTL_RS232_L_LED_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_OF_OFEM_CNTL_RS232_L_LED_DEFAULT    0x00000000
+
+/* ================================================================
+ * Field info for register KA_OF_OFEM_MAC_FLOW_CTL */
+#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_LOCH_APS_SEL_MASK    0x00000100
+#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_LOCH_APS_SEL_SHIFT    8
+#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_LOCH_APS_SEL_MSB    8
+#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_LOCH_APS_SEL_LSB    8
+#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_LOCH_APS_SEL_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_LOCH_APS_SEL_DEFAULT    0x00000000
+#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_MACA_TXPAUSE_FR_MASK    0x00000010
+#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_MACA_TXPAUSE_FR_SHIFT    4
+#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_MACA_TXPAUSE_FR_MSB    4
+#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_MACA_TXPAUSE_FR_LSB    4
+#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_MACA_TXPAUSE_FR_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_MACA_TXPAUSE_FR_DEFAULT    0x00000000
+#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_MACA_TXPAUSE_ADDR_MASK    0x0000000f
+#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_MACA_TXPAUSE_ADDR_SHIFT    0
+#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_MACA_TXPAUSE_ADDR_MSB    3
+#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_MACA_TXPAUSE_ADDR_LSB    0
+#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_MACA_TXPAUSE_ADDR_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_MACA_TXPAUSE_ADDR_DEFAULT    0x00000000
+
+/* ================================================================
+ * Field info for register KA_OF_OFEM_INTERRUPT */
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC_TIMEOUT_MASK    0x00000100
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC_TIMEOUT_SHIFT    8
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC_TIMEOUT_MSB    8
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC_TIMEOUT_LSB    8
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC_TIMEOUT_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC_TIMEOUT_DEFAULT    0x00000000
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_QK_A_LOSOUT_N_MASK    0x00000080
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_QK_A_LOSOUT_N_SHIFT    7
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_QK_A_LOSOUT_N_MSB    7
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_QK_A_LOSOUT_N_LSB    7
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_QK_A_LOSOUT_N_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_QK_A_LOSOUT_N_DEFAULT    0x00000000
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_QK_B_LOSOUT_N_MASK    0x00000040
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_QK_B_LOSOUT_N_SHIFT    6
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_QK_B_LOSOUT_N_MSB    6
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_QK_B_LOSOUT_N_LSB    6
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_QK_B_LOSOUT_N_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_QK_B_LOSOUT_N_DEFAULT    0x00000000
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_A_NR_MASK    0x00000020
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_A_NR_SHIFT    5
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_A_NR_MSB    5
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_A_NR_LSB    5
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_A_NR_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_A_NR_DEFAULT    0x00000000
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_B_NR_MASK    0x00000010
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_B_NR_SHIFT    4
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_B_NR_MSB    4
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_B_NR_LSB    4
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_B_NR_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_B_NR_DEFAULT    0x00000000
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_A_INT_N_MASK    0x00000008
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_A_INT_N_SHIFT    3
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_A_INT_N_MSB    3
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_A_INT_N_LSB    3
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_A_INT_N_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_A_INT_N_DEFAULT    0x00000000
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_B_INT_N_MASK    0x00000004
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_B_INT_N_SHIFT    2
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_B_INT_N_MSB    2
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_B_INT_N_LSB    2
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_B_INT_N_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_B_INT_N_DEFAULT    0x00000000
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC1_INT_N_MASK    0x00000002
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC1_INT_N_SHIFT    1
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC1_INT_N_MSB    1
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC1_INT_N_LSB    1
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC1_INT_N_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC1_INT_N_DEFAULT    0x00000000
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC0_INT_N_MASK    0x00000001
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC0_INT_N_SHIFT    0
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC0_INT_N_MSB    0
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC0_INT_N_LSB    0
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC0_INT_N_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC0_INT_N_DEFAULT    0x00000000
+
+/* ================================================================
+ * Field info for register KA_OF_OFEM_INTERRUPT_MASK */
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC_TIMEOUT_DISINT_MASK    0x00000100
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC_TIMEOUT_DISINT_SHIFT    8
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC_TIMEOUT_DISINT_MSB    8
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC_TIMEOUT_DISINT_LSB    8
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC_TIMEOUT_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC_TIMEOUT_DISINT_DEFAULT    0x00000001
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_QK_A_LOSOUT_N_DISINT_MASK    0x00000080
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_QK_A_LOSOUT_N_DISINT_SHIFT    7
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_QK_A_LOSOUT_N_DISINT_MSB    7
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_QK_A_LOSOUT_N_DISINT_LSB    7
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_QK_A_LOSOUT_N_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_QK_A_LOSOUT_N_DISINT_DEFAULT    0x00000001
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_QK_B_LOSOUT_N_DISINT_MASK    0x00000040
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_QK_B_LOSOUT_N_DISINT_SHIFT    6
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_QK_B_LOSOUT_N_DISINT_MSB    6
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_QK_B_LOSOUT_N_DISINT_LSB    6
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_QK_B_LOSOUT_N_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_QK_B_LOSOUT_N_DISINT_DEFAULT    0x00000001
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_A_NR_DISINT_MASK    0x00000020
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_A_NR_DISINT_SHIFT    5
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_A_NR_DISINT_MSB    5
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_A_NR_DISINT_LSB    5
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_A_NR_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_A_NR_DISINT_DEFAULT    0x00000001
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_B_NR_DISINT_MASK    0x00000010
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_B_NR_DISINT_SHIFT    4
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_B_NR_DISINT_MSB    4
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_B_NR_DISINT_LSB    4
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_B_NR_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_B_NR_DISINT_DEFAULT    0x00000001
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_A_INT_N_DISINT_MASK    0x00000008
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_A_INT_N_DISINT_SHIFT    3
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_A_INT_N_DISINT_MSB    3
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_A_INT_N_DISINT_LSB    3
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_A_INT_N_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_A_INT_N_DISINT_DEFAULT    0x00000001
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_B_INT_N_DISINT_MASK    0x00000004
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_B_INT_N_DISINT_SHIFT    2
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_B_INT_N_DISINT_MSB    2
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_B_INT_N_DISINT_LSB    2
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_B_INT_N_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_B_INT_N_DISINT_DEFAULT    0x00000001
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC1_INT_N_DISINT_MASK    0x00000002
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC1_INT_N_DISINT_SHIFT    1
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC1_INT_N_DISINT_MSB    1
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC1_INT_N_DISINT_LSB    1
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC1_INT_N_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC1_INT_N_DISINT_DEFAULT    0x00000001
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC0_INT_N_DISINT_MASK    0x00000001
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC0_INT_N_DISINT_SHIFT    0
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC0_INT_N_DISINT_MSB    0
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC0_INT_N_DISINT_LSB    0
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC0_INT_N_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC0_INT_N_DISINT_DEFAULT    0x00000001
+
+/* ================================================================
+ * Field info for register KA_OF_OFEM_SCRATCH */
+#define SAND_HAL_KA_OF_OFEM_SCRATCH_TEST_BITS_MASK    0xffffffff
+#define SAND_HAL_KA_OF_OFEM_SCRATCH_TEST_BITS_SHIFT    0
+#define SAND_HAL_KA_OF_OFEM_SCRATCH_TEST_BITS_MSB    31
+#define SAND_HAL_KA_OF_OFEM_SCRATCH_TEST_BITS_LSB    0
+#define SAND_HAL_KA_OF_OFEM_SCRATCH_TEST_BITS_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_OF_OFEM_SCRATCH_TEST_BITS_DEFAULT    0x00000000
+
+/* ================================================================
+ * Field info for register KA_OF_OFEM_SCRATCH_MASK */
+#define SAND_HAL_KA_OF_OFEM_SCRATCH_MASK_TEST_BITS_DISINT_MASK    0xffffffff
+#define SAND_HAL_KA_OF_OFEM_SCRATCH_MASK_TEST_BITS_DISINT_SHIFT    0
+#define SAND_HAL_KA_OF_OFEM_SCRATCH_MASK_TEST_BITS_DISINT_MSB    31
+#define SAND_HAL_KA_OF_OFEM_SCRATCH_MASK_TEST_BITS_DISINT_LSB    0
+#define SAND_HAL_KA_OF_OFEM_SCRATCH_MASK_TEST_BITS_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_OF_OFEM_SCRATCH_MASK_TEST_BITS_DISINT_DEFAULT    0xffffffff
+
+#endif /* matches #ifndef HAL_KA_OF_AUTO_H */
diff --git a/board/sandburst/karef/hal_ka_sc_auto.h b/board/sandburst/karef/hal_ka_sc_auto.h
new file mode 100644
index 0000000..db1cec2
--- /dev/null
+++ b/board/sandburst/karef/hal_ka_sc_auto.h
@@ -0,0 +1,836 @@
+/* ****************************************************************
+ * Common defs for reg spec for chip ka_sc
+ * Auto-generated by trex2: DO NOT HAND-EDIT!!
+ * ****************************************************************
+ */
+
+#ifndef HAL_KA_SC_AUTO_H
+#define HAL_KA_SC_AUTO_H
+
+
+/* ----------------------------------------------------------------
+ * For block: 'scan'
+ */
+
+/* ---- Block instance addressing (for block-select) */
+#define SCAN_BLOCK_ADDR_BIT_L 7
+#define SCAN_BLOCK_ADDR_BIT_H 9
+#define SCAN_BLOCK_ADDR_WIDTH 3
+
+#define  SCAN_ADDR  0x0
+
+/* ---- Reg addressing (within block) */
+#define SCAN_REG_ADDR_BIT_L 2
+#define SCAN_REG_ADDR_BIT_H 6
+#define SCAN_REG_ADDR_WIDTH 5
+
+
+/* ================================================================
+ * ---- Register KA_SC_SCAN_REVISION */
+#define SAND_HAL_KA_SC_SCAN_REVISION_OFFSET    0x000
+#ifndef SAND_HAL_KA_SC_SCAN_REVISION_NO_TEST_MASK
+#define SAND_HAL_KA_SC_SCAN_REVISION_NO_TEST_MASK    0x000
+#endif
+#define SAND_HAL_KA_SC_SCAN_REVISION_MASK    0xffffffff
+#define SAND_HAL_KA_SC_SCAN_REVISION_MSB     31
+#define SAND_HAL_KA_SC_SCAN_REVISION_LSB      0
+
+/* ================================================================
+ * ---- Register KA_SC_SCAN_RESET */
+#define SAND_HAL_KA_SC_SCAN_RESET_OFFSET    0x004
+#ifndef SAND_HAL_KA_SC_SCAN_RESET_NO_TEST_MASK
+#define SAND_HAL_KA_SC_SCAN_RESET_NO_TEST_MASK    0x000
+#endif
+#define SAND_HAL_KA_SC_SCAN_RESET_MASK    0xffffffff
+#define SAND_HAL_KA_SC_SCAN_RESET_MSB     31
+#define SAND_HAL_KA_SC_SCAN_RESET_LSB      0
+
+/* ================================================================
+ * ---- Register KA_SC_SCAN_STATUS */
+#define SAND_HAL_KA_SC_SCAN_STATUS_OFFSET    0x008
+#ifndef SAND_HAL_KA_SC_SCAN_STATUS_NO_TEST_MASK
+#define SAND_HAL_KA_SC_SCAN_STATUS_NO_TEST_MASK    0x000
+#endif
+#define SAND_HAL_KA_SC_SCAN_STATUS_MASK    0xffffffff
+#define SAND_HAL_KA_SC_SCAN_STATUS_MSB     31
+#define SAND_HAL_KA_SC_SCAN_STATUS_LSB      0
+
+/* ================================================================
+ * ---- Register KA_SC_SCAN_CNTL */
+#define SAND_HAL_KA_SC_SCAN_CNTL_OFFSET    0x01c
+#ifndef SAND_HAL_KA_SC_SCAN_CNTL_NO_TEST_MASK
+#define SAND_HAL_KA_SC_SCAN_CNTL_NO_TEST_MASK    0x000
+#endif
+#define SAND_HAL_KA_SC_SCAN_CNTL_MASK    0xffffffff
+#define SAND_HAL_KA_SC_SCAN_CNTL_MSB     31
+#define SAND_HAL_KA_SC_SCAN_CNTL_LSB      0
+
+/* ================================================================
+ * ---- Register KA_SC_SCAN_BRD_INFO */
+#define SAND_HAL_KA_SC_SCAN_BRD_INFO_OFFSET    0x020
+#ifndef SAND_HAL_KA_SC_SCAN_BRD_INFO_NO_TEST_MASK
+#define SAND_HAL_KA_SC_SCAN_BRD_INFO_NO_TEST_MASK    0x000
+#endif
+#define SAND_HAL_KA_SC_SCAN_BRD_INFO_MASK    0xffffffff
+#define SAND_HAL_KA_SC_SCAN_BRD_INFO_MSB     31
+#define SAND_HAL_KA_SC_SCAN_BRD_INFO_LSB      0
+
+/* ================================================================
+ * ---- Register KA_SC_SCAN_SCAN_FROM_0 */
+#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_0_OFFSET    0x024
+#ifndef SAND_HAL_KA_SC_SCAN_SCAN_FROM_0_NO_TEST_MASK
+#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_0_NO_TEST_MASK    0x000
+#endif
+#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_0_MASK    0xffffffff
+#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_0_MSB     31
+#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_0_LSB      0
+
+/* ================================================================
+ * ---- Register KA_SC_SCAN_SCAN_FROM_1 */
+#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_1_OFFSET    0x028
+#ifndef SAND_HAL_KA_SC_SCAN_SCAN_FROM_1_NO_TEST_MASK
+#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_1_NO_TEST_MASK    0x000
+#endif
+#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_1_MASK    0xffffffff
+#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_1_MSB     31
+#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_1_LSB      0
+
+/* ================================================================
+ * ---- Register KA_SC_SCAN_SCAN_TO_0 */
+#define SAND_HAL_KA_SC_SCAN_SCAN_TO_0_OFFSET    0x02c
+#ifndef SAND_HAL_KA_SC_SCAN_SCAN_TO_0_NO_TEST_MASK
+#define SAND_HAL_KA_SC_SCAN_SCAN_TO_0_NO_TEST_MASK    0x000
+#endif
+#define SAND_HAL_KA_SC_SCAN_SCAN_TO_0_MASK    0xffffffff
+#define SAND_HAL_KA_SC_SCAN_SCAN_TO_0_MSB     31
+#define SAND_HAL_KA_SC_SCAN_SCAN_TO_0_LSB      0
+
+/* ================================================================
+ * ---- Register KA_SC_SCAN_SCAN_TO_1 */
+#define SAND_HAL_KA_SC_SCAN_SCAN_TO_1_OFFSET    0x030
+#ifndef SAND_HAL_KA_SC_SCAN_SCAN_TO_1_NO_TEST_MASK
+#define SAND_HAL_KA_SC_SCAN_SCAN_TO_1_NO_TEST_MASK    0x000
+#endif
+#define SAND_HAL_KA_SC_SCAN_SCAN_TO_1_MASK    0xffffffff
+#define SAND_HAL_KA_SC_SCAN_SCAN_TO_1_MSB     31
+#define SAND_HAL_KA_SC_SCAN_SCAN_TO_1_LSB      0
+
+/* ================================================================
+ * ---- Register KA_SC_SCAN_SCAN_CTRL */
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_OFFSET    0x034
+#ifndef SAND_HAL_KA_SC_SCAN_SCAN_CTRL_NO_TEST_MASK
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_NO_TEST_MASK    0x000
+#endif
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_MASK    0xffffffff
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_MSB     31
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_LSB      0
+
+/* ================================================================
+ * ---- Register KA_SC_SCAN_PLL_CTRL */
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_OFFSET    0x038
+#ifndef SAND_HAL_KA_SC_SCAN_PLL_CTRL_NO_TEST_MASK
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_NO_TEST_MASK    0x000
+#endif
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_MASK    0xffffffff
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_MSB     31
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_LSB      0
+
+/* ================================================================
+ * ---- Register KA_SC_SCAN_CORE_CLK_COUNT */
+#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_OFFSET    0x03c
+#ifndef SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_NO_TEST_MASK
+#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_NO_TEST_MASK    0x000
+#endif
+#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_MASK    0xffffffff
+#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_MSB     31
+#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_LSB      0
+
+/* ================================================================
+ * ---- Register KA_SC_SCAN_DR_CLK_COUNT */
+#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_OFFSET    0x040
+#ifndef SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_NO_TEST_MASK
+#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_NO_TEST_MASK    0x000
+#endif
+#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_MASK    0xffffffff
+#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_MSB     31
+#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_LSB      0
+
+/* ================================================================
+ * ---- Register KA_SC_SCAN_SPI_CLK_COUNT */
+#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_OFFSET    0x044
+#ifndef SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_NO_TEST_MASK
+#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_NO_TEST_MASK    0x000
+#endif
+#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_MASK    0xffffffff
+#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_MSB     31
+#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_LSB      0
+
+/* ================================================================
+ * ---- Register KA_SC_SCAN_BRD_BRD_OUT_DATA */
+#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_DATA_OFFSET    0x048
+#ifndef SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_DATA_NO_TEST_MASK
+#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_DATA_NO_TEST_MASK    0x000
+#endif
+#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_DATA_MASK    0xffffffff
+#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_DATA_MSB     31
+#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_DATA_LSB      0
+
+/* ================================================================
+ * ---- Register KA_SC_SCAN_BRD_BRD_OUT_ENABLE */
+#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_ENABLE_OFFSET    0x04c
+#ifndef SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_ENABLE_NO_TEST_MASK
+#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_ENABLE_NO_TEST_MASK    0x000
+#endif
+#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_ENABLE_MASK    0xffffffff
+#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_ENABLE_MSB     31
+#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_ENABLE_LSB      0
+
+/* ================================================================
+ * ---- Register KA_SC_SCAN_BRD_BRD_IN */
+#define SAND_HAL_KA_SC_SCAN_BRD_BRD_IN_OFFSET    0x050
+#ifndef SAND_HAL_KA_SC_SCAN_BRD_BRD_IN_NO_TEST_MASK
+#define SAND_HAL_KA_SC_SCAN_BRD_BRD_IN_NO_TEST_MASK    0x000
+#endif
+#define SAND_HAL_KA_SC_SCAN_BRD_BRD_IN_MASK    0xffffffff
+#define SAND_HAL_KA_SC_SCAN_BRD_BRD_IN_MSB     31
+#define SAND_HAL_KA_SC_SCAN_BRD_BRD_IN_LSB      0
+
+/* ================================================================
+ * ---- Register KA_SC_SCAN_MISC */
+#define SAND_HAL_KA_SC_SCAN_MISC_OFFSET    0x054
+#ifndef SAND_HAL_KA_SC_SCAN_MISC_NO_TEST_MASK
+#define SAND_HAL_KA_SC_SCAN_MISC_NO_TEST_MASK    0x000
+#endif
+#define SAND_HAL_KA_SC_SCAN_MISC_MASK    0xffffffff
+#define SAND_HAL_KA_SC_SCAN_MISC_MSB     31
+#define SAND_HAL_KA_SC_SCAN_MISC_LSB      0
+
+/* ================================================================
+ * ---- Register KA_SC_SCAN_INTERRUPT */
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_OFFSET    0x00c
+#ifndef SAND_HAL_KA_SC_SCAN_INTERRUPT_NO_TEST_MASK
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_NO_TEST_MASK    0x000
+#endif
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK    0xffffffff
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MSB     31
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_LSB      0
+
+/* ================================================================
+ * ---- Register KA_SC_SCAN_INTERRUPT_MASK */
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_OFFSET    0x010
+#ifndef SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_NO_TEST_MASK
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_NO_TEST_MASK    0x000
+#endif
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_MASK    0xffffffff
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_MSB     31
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_LSB      0
+
+/* ================================================================
+ * ---- Register KA_SC_SCAN_SCRATCH */
+#define SAND_HAL_KA_SC_SCAN_SCRATCH_OFFSET    0x014
+#ifndef SAND_HAL_KA_SC_SCAN_SCRATCH_NO_TEST_MASK
+#define SAND_HAL_KA_SC_SCAN_SCRATCH_NO_TEST_MASK    0x000
+#endif
+#define SAND_HAL_KA_SC_SCAN_SCRATCH_MASK    0xffffffff
+#define SAND_HAL_KA_SC_SCAN_SCRATCH_MSB     31
+#define SAND_HAL_KA_SC_SCAN_SCRATCH_LSB      0
+
+/* ================================================================
+ * ---- Register KA_SC_SCAN_SCRATCH_MASK */
+#define SAND_HAL_KA_SC_SCAN_SCRATCH_MASK_OFFSET    0x018
+#ifndef SAND_HAL_KA_SC_SCAN_SCRATCH_MASK_NO_TEST_MASK
+#define SAND_HAL_KA_SC_SCAN_SCRATCH_MASK_NO_TEST_MASK    0x000
+#endif
+#define SAND_HAL_KA_SC_SCAN_SCRATCH_MASK_MASK    0xffffffff
+#define SAND_HAL_KA_SC_SCAN_SCRATCH_MASK_MSB     31
+#define SAND_HAL_KA_SC_SCAN_SCRATCH_MASK_LSB      0
+
+/* ================================================================
+ * Field info for register KA_SC_SCAN_REVISION */
+#define SAND_HAL_KA_SC_SCAN_REVISION_IDENTIFICATION_MASK    0x0000ff00
+#define SAND_HAL_KA_SC_SCAN_REVISION_IDENTIFICATION_SHIFT    8
+#define SAND_HAL_KA_SC_SCAN_REVISION_IDENTIFICATION_MSB    15
+#define SAND_HAL_KA_SC_SCAN_REVISION_IDENTIFICATION_LSB    8
+#define SAND_HAL_KA_SC_SCAN_REVISION_IDENTIFICATION_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_KA_SC_SCAN_REVISION_IDENTIFICATION_DEFAULT    0x00000023
+#define SAND_HAL_KA_SC_SCAN_REVISION_REVISION_MASK    0x000000ff
+#define SAND_HAL_KA_SC_SCAN_REVISION_REVISION_SHIFT    0
+#define SAND_HAL_KA_SC_SCAN_REVISION_REVISION_MSB    7
+#define SAND_HAL_KA_SC_SCAN_REVISION_REVISION_LSB    0
+#define SAND_HAL_KA_SC_SCAN_REVISION_REVISION_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_KA_SC_SCAN_REVISION_REVISION_DEFAULT    0x00000000
+
+/* ================================================================
+ * Field info for register KA_SC_SCAN_RESET */
+#define SAND_HAL_KA_SC_SCAN_RESET_CF_RESET_N_MASK    0x00000200
+#define SAND_HAL_KA_SC_SCAN_RESET_CF_RESET_N_SHIFT    9
+#define SAND_HAL_KA_SC_SCAN_RESET_CF_RESET_N_MSB    9
+#define SAND_HAL_KA_SC_SCAN_RESET_CF_RESET_N_LSB    9
+#define SAND_HAL_KA_SC_SCAN_RESET_CF_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_RESET_CF_RESET_N_DEFAULT    0x00000000
+#define SAND_HAL_KA_SC_SCAN_RESET_BME_RESET_N_MASK    0x00000100
+#define SAND_HAL_KA_SC_SCAN_RESET_BME_RESET_N_SHIFT    8
+#define SAND_HAL_KA_SC_SCAN_RESET_BME_RESET_N_MSB    8
+#define SAND_HAL_KA_SC_SCAN_RESET_BME_RESET_N_LSB    8
+#define SAND_HAL_KA_SC_SCAN_RESET_BME_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_RESET_BME_RESET_N_DEFAULT    0x00000000
+#define SAND_HAL_KA_SC_SCAN_RESET_KA_RESET_N_MASK    0x00000080
+#define SAND_HAL_KA_SC_SCAN_RESET_KA_RESET_N_SHIFT    7
+#define SAND_HAL_KA_SC_SCAN_RESET_KA_RESET_N_MSB    7
+#define SAND_HAL_KA_SC_SCAN_RESET_KA_RESET_N_LSB    7
+#define SAND_HAL_KA_SC_SCAN_RESET_KA_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_RESET_KA_RESET_N_DEFAULT    0x00000000
+#define SAND_HAL_KA_SC_SCAN_RESET_SLAVE_RESET_N_MASK    0x00000040
+#define SAND_HAL_KA_SC_SCAN_RESET_SLAVE_RESET_N_SHIFT    6
+#define SAND_HAL_KA_SC_SCAN_RESET_SLAVE_RESET_N_MSB    6
+#define SAND_HAL_KA_SC_SCAN_RESET_SLAVE_RESET_N_LSB    6
+#define SAND_HAL_KA_SC_SCAN_RESET_SLAVE_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_RESET_SLAVE_RESET_N_DEFAULT    0x00000000
+#define SAND_HAL_KA_SC_SCAN_RESET_OFEM_RESET_N_MASK    0x00000020
+#define SAND_HAL_KA_SC_SCAN_RESET_OFEM_RESET_N_SHIFT    5
+#define SAND_HAL_KA_SC_SCAN_RESET_OFEM_RESET_N_MSB    5
+#define SAND_HAL_KA_SC_SCAN_RESET_OFEM_RESET_N_LSB    5
+#define SAND_HAL_KA_SC_SCAN_RESET_OFEM_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_RESET_OFEM_RESET_N_DEFAULT    0x00000000
+#define SAND_HAL_KA_SC_SCAN_RESET_IFE_A_RESET_N_MASK    0x00000010
+#define SAND_HAL_KA_SC_SCAN_RESET_IFE_A_RESET_N_SHIFT    4
+#define SAND_HAL_KA_SC_SCAN_RESET_IFE_A_RESET_N_MSB    4
+#define SAND_HAL_KA_SC_SCAN_RESET_IFE_A_RESET_N_LSB    4
+#define SAND_HAL_KA_SC_SCAN_RESET_IFE_A_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_RESET_IFE_A_RESET_N_DEFAULT    0x00000000
+#define SAND_HAL_KA_SC_SCAN_RESET_I2C_MUX1_RESET_N_MASK    0x00000008
+#define SAND_HAL_KA_SC_SCAN_RESET_I2C_MUX1_RESET_N_SHIFT    3
+#define SAND_HAL_KA_SC_SCAN_RESET_I2C_MUX1_RESET_N_MSB    3
+#define SAND_HAL_KA_SC_SCAN_RESET_I2C_MUX1_RESET_N_LSB    3
+#define SAND_HAL_KA_SC_SCAN_RESET_I2C_MUX1_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_RESET_I2C_MUX1_RESET_N_DEFAULT    0x00000000
+#define SAND_HAL_KA_SC_SCAN_RESET_PHY0_RESET_N_MASK    0x00000002
+#define SAND_HAL_KA_SC_SCAN_RESET_PHY0_RESET_N_SHIFT    1
+#define SAND_HAL_KA_SC_SCAN_RESET_PHY0_RESET_N_MSB    1
+#define SAND_HAL_KA_SC_SCAN_RESET_PHY0_RESET_N_LSB    1
+#define SAND_HAL_KA_SC_SCAN_RESET_PHY0_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_RESET_PHY0_RESET_N_DEFAULT    0x00000000
+#define SAND_HAL_KA_SC_SCAN_RESET_PHY1_RESET_N_MASK    0x00000001
+#define SAND_HAL_KA_SC_SCAN_RESET_PHY1_RESET_N_SHIFT    0
+#define SAND_HAL_KA_SC_SCAN_RESET_PHY1_RESET_N_MSB    0
+#define SAND_HAL_KA_SC_SCAN_RESET_PHY1_RESET_N_LSB    0
+#define SAND_HAL_KA_SC_SCAN_RESET_PHY1_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_RESET_PHY1_RESET_N_DEFAULT    0x00000000
+
+/* ================================================================
+ * Field info for register KA_SC_SCAN_STATUS */
+#define SAND_HAL_KA_SC_SCAN_STATUS_SPI_LOCK_MASK    0x00000040
+#define SAND_HAL_KA_SC_SCAN_STATUS_SPI_LOCK_SHIFT    6
+#define SAND_HAL_KA_SC_SCAN_STATUS_SPI_LOCK_MSB    6
+#define SAND_HAL_KA_SC_SCAN_STATUS_SPI_LOCK_LSB    6
+#define SAND_HAL_KA_SC_SCAN_STATUS_SPI_LOCK_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_KA_SC_SCAN_STATUS_SPI_LOCK_DEFAULT    0x00000000
+#define SAND_HAL_KA_SC_SCAN_STATUS_DR_LOCK_MASK    0x00000020
+#define SAND_HAL_KA_SC_SCAN_STATUS_DR_LOCK_SHIFT    5
+#define SAND_HAL_KA_SC_SCAN_STATUS_DR_LOCK_MSB    5
+#define SAND_HAL_KA_SC_SCAN_STATUS_DR_LOCK_LSB    5
+#define SAND_HAL_KA_SC_SCAN_STATUS_DR_LOCK_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_KA_SC_SCAN_STATUS_DR_LOCK_DEFAULT    0x00000000
+#define SAND_HAL_KA_SC_SCAN_STATUS_CORE_LOCK_MASK    0x00000010
+#define SAND_HAL_KA_SC_SCAN_STATUS_CORE_LOCK_SHIFT    4
+#define SAND_HAL_KA_SC_SCAN_STATUS_CORE_LOCK_MSB    4
+#define SAND_HAL_KA_SC_SCAN_STATUS_CORE_LOCK_LSB    4
+#define SAND_HAL_KA_SC_SCAN_STATUS_CORE_LOCK_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_KA_SC_SCAN_STATUS_CORE_LOCK_DEFAULT    0x00000000
+#define SAND_HAL_KA_SC_SCAN_STATUS_OFEM_DONE_MASK    0x00000008
+#define SAND_HAL_KA_SC_SCAN_STATUS_OFEM_DONE_SHIFT    3
+#define SAND_HAL_KA_SC_SCAN_STATUS_OFEM_DONE_MSB    3
+#define SAND_HAL_KA_SC_SCAN_STATUS_OFEM_DONE_LSB    3
+#define SAND_HAL_KA_SC_SCAN_STATUS_OFEM_DONE_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_KA_SC_SCAN_STATUS_OFEM_DONE_DEFAULT    0x00000000
+#define SAND_HAL_KA_SC_SCAN_STATUS_PS_A_PRES_N_MASK    0x00000004
+#define SAND_HAL_KA_SC_SCAN_STATUS_PS_A_PRES_N_SHIFT    2
+#define SAND_HAL_KA_SC_SCAN_STATUS_PS_A_PRES_N_MSB    2
+#define SAND_HAL_KA_SC_SCAN_STATUS_PS_A_PRES_N_LSB    2
+#define SAND_HAL_KA_SC_SCAN_STATUS_PS_A_PRES_N_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_KA_SC_SCAN_STATUS_PS_A_PRES_N_DEFAULT    0x00000000
+#define SAND_HAL_KA_SC_SCAN_STATUS_PS_B_PRES_N_MASK    0x00000002
+#define SAND_HAL_KA_SC_SCAN_STATUS_PS_B_PRES_N_SHIFT    1
+#define SAND_HAL_KA_SC_SCAN_STATUS_PS_B_PRES_N_MSB    1
+#define SAND_HAL_KA_SC_SCAN_STATUS_PS_B_PRES_N_LSB    1
+#define SAND_HAL_KA_SC_SCAN_STATUS_PS_B_PRES_N_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_KA_SC_SCAN_STATUS_PS_B_PRES_N_DEFAULT    0x00000000
+#define SAND_HAL_KA_SC_SCAN_STATUS_ALL_GOOD_MASK    0x00000001
+#define SAND_HAL_KA_SC_SCAN_STATUS_ALL_GOOD_SHIFT    0
+#define SAND_HAL_KA_SC_SCAN_STATUS_ALL_GOOD_MSB    0
+#define SAND_HAL_KA_SC_SCAN_STATUS_ALL_GOOD_LSB    0
+#define SAND_HAL_KA_SC_SCAN_STATUS_ALL_GOOD_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_KA_SC_SCAN_STATUS_ALL_GOOD_DEFAULT    0x00000000
+
+/* ================================================================
+ * Field info for register KA_SC_SCAN_CNTL */
+#define SAND_HAL_KA_SC_SCAN_CNTL_SW_PWR_DOWN_MASK    0x00000400
+#define SAND_HAL_KA_SC_SCAN_CNTL_SW_PWR_DOWN_SHIFT    10
+#define SAND_HAL_KA_SC_SCAN_CNTL_SW_PWR_DOWN_MSB    10
+#define SAND_HAL_KA_SC_SCAN_CNTL_SW_PWR_DOWN_LSB    10
+#define SAND_HAL_KA_SC_SCAN_CNTL_SW_PWR_DOWN_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_CNTL_SW_PWR_DOWN_DEFAULT    0x00000000
+#define SAND_HAL_KA_SC_SCAN_CNTL_CORE_CLK_50_EN_MASK    0x00000200
+#define SAND_HAL_KA_SC_SCAN_CNTL_CORE_CLK_50_EN_SHIFT    9
+#define SAND_HAL_KA_SC_SCAN_CNTL_CORE_CLK_50_EN_MSB    9
+#define SAND_HAL_KA_SC_SCAN_CNTL_CORE_CLK_50_EN_LSB    9
+#define SAND_HAL_KA_SC_SCAN_CNTL_CORE_CLK_50_EN_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_CNTL_CORE_CLK_50_EN_DEFAULT    0x00000001
+#define SAND_HAL_KA_SC_SCAN_CNTL_PCI_CLK_EN_MASK    0x00000100
+#define SAND_HAL_KA_SC_SCAN_CNTL_PCI_CLK_EN_SHIFT    8
+#define SAND_HAL_KA_SC_SCAN_CNTL_PCI_CLK_EN_MSB    8
+#define SAND_HAL_KA_SC_SCAN_CNTL_PCI_CLK_EN_LSB    8
+#define SAND_HAL_KA_SC_SCAN_CNTL_PCI_CLK_EN_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_CNTL_PCI_CLK_EN_DEFAULT    0x00000001
+#define SAND_HAL_KA_SC_SCAN_CNTL_TEMP_LED_MASK    0x000000c0
+#define SAND_HAL_KA_SC_SCAN_CNTL_TEMP_LED_SHIFT    6
+#define SAND_HAL_KA_SC_SCAN_CNTL_TEMP_LED_MSB    7
+#define SAND_HAL_KA_SC_SCAN_CNTL_TEMP_LED_LSB    6
+#define SAND_HAL_KA_SC_SCAN_CNTL_TEMP_LED_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_CNTL_TEMP_LED_DEFAULT    0x00000000
+#define SAND_HAL_KA_SC_SCAN_CNTL_FAULT_LED_MASK    0x00000030
+#define SAND_HAL_KA_SC_SCAN_CNTL_FAULT_LED_SHIFT    4
+#define SAND_HAL_KA_SC_SCAN_CNTL_FAULT_LED_MSB    5
+#define SAND_HAL_KA_SC_SCAN_CNTL_FAULT_LED_LSB    4
+#define SAND_HAL_KA_SC_SCAN_CNTL_FAULT_LED_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_CNTL_FAULT_LED_DEFAULT    0x00000000
+#define SAND_HAL_KA_SC_SCAN_CNTL_RS232_R_LED_MASK    0x0000000c
+#define SAND_HAL_KA_SC_SCAN_CNTL_RS232_R_LED_SHIFT    2
+#define SAND_HAL_KA_SC_SCAN_CNTL_RS232_R_LED_MSB    3
+#define SAND_HAL_KA_SC_SCAN_CNTL_RS232_R_LED_LSB    2
+#define SAND_HAL_KA_SC_SCAN_CNTL_RS232_R_LED_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_CNTL_RS232_R_LED_DEFAULT    0x00000000
+#define SAND_HAL_KA_SC_SCAN_CNTL_RS232_L_LED_MASK    0x00000003
+#define SAND_HAL_KA_SC_SCAN_CNTL_RS232_L_LED_SHIFT    0
+#define SAND_HAL_KA_SC_SCAN_CNTL_RS232_L_LED_MSB    1
+#define SAND_HAL_KA_SC_SCAN_CNTL_RS232_L_LED_LSB    0
+#define SAND_HAL_KA_SC_SCAN_CNTL_RS232_L_LED_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_CNTL_RS232_L_LED_DEFAULT    0x00000000
+
+/* ================================================================
+ * Field info for register KA_SC_SCAN_BRD_INFO */
+#define SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_ID_MASK    0x0000f000
+#define SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_ID_SHIFT    12
+#define SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_ID_MSB    15
+#define SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_ID_LSB    12
+#define SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_ID_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_ID_DEFAULT    0x00000000
+#define SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_REV_MASK    0x00000300
+#define SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_REV_SHIFT    8
+#define SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_REV_MSB    9
+#define SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_REV_LSB    8
+#define SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_REV_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_REV_DEFAULT    0x00000000
+#define SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_ID_MASK    0x000000f0
+#define SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_ID_SHIFT    4
+#define SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_ID_MSB    7
+#define SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_ID_LSB    4
+#define SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_ID_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_ID_DEFAULT    0x00000000
+#define SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_REV_MASK    0x00000003
+#define SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_REV_SHIFT    0
+#define SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_REV_MSB    1
+#define SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_REV_LSB    0
+#define SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_REV_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_REV_DEFAULT    0x00000000
+
+/* ================================================================
+ * Field info for register KA_SC_SCAN_SCAN_FROM_0 */
+#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_0_SCAN_OUT_MASK    0xffffffff
+#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_0_SCAN_OUT_SHIFT    0
+#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_0_SCAN_OUT_MSB    31
+#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_0_SCAN_OUT_LSB    0
+#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_0_SCAN_OUT_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_0_SCAN_OUT_DEFAULT    0x00000000
+
+/* ================================================================
+ * Field info for register KA_SC_SCAN_SCAN_FROM_1 */
+#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_1_SCAN_OUT_MASK    0xffffffff
+#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_1_SCAN_OUT_SHIFT    0
+#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_1_SCAN_OUT_MSB    31
+#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_1_SCAN_OUT_LSB    0
+#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_1_SCAN_OUT_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_1_SCAN_OUT_DEFAULT    0x00000000
+
+/* ================================================================
+ * Field info for register KA_SC_SCAN_SCAN_TO_0 */
+#define SAND_HAL_KA_SC_SCAN_SCAN_TO_0_SCAN_IN_MASK    0xffffffff
+#define SAND_HAL_KA_SC_SCAN_SCAN_TO_0_SCAN_IN_SHIFT    0
+#define SAND_HAL_KA_SC_SCAN_SCAN_TO_0_SCAN_IN_MSB    31
+#define SAND_HAL_KA_SC_SCAN_SCAN_TO_0_SCAN_IN_LSB    0
+#define SAND_HAL_KA_SC_SCAN_SCAN_TO_0_SCAN_IN_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_SCAN_TO_0_SCAN_IN_DEFAULT    0x00000000
+
+/* ================================================================
+ * Field info for register KA_SC_SCAN_SCAN_TO_1 */
+#define SAND_HAL_KA_SC_SCAN_SCAN_TO_1_SCAN_IN_MASK    0xffffffff
+#define SAND_HAL_KA_SC_SCAN_SCAN_TO_1_SCAN_IN_SHIFT    0
+#define SAND_HAL_KA_SC_SCAN_SCAN_TO_1_SCAN_IN_MSB    31
+#define SAND_HAL_KA_SC_SCAN_SCAN_TO_1_SCAN_IN_LSB    0
+#define SAND_HAL_KA_SC_SCAN_SCAN_TO_1_SCAN_IN_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_SCAN_TO_1_SCAN_IN_DEFAULT    0x00000000
+
+/* ================================================================
+ * Field info for register KA_SC_SCAN_SCAN_CTRL */
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCI_SEL_BM_MASK    0x04000000
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCI_SEL_BM_SHIFT    26
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCI_SEL_BM_MSB    26
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCI_SEL_BM_LSB    26
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCI_SEL_BM_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCI_SEL_BM_DEFAULT    0x00000000
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_TEST_MODE_MASK    0x03000000
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_TEST_MODE_SHIFT    24
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_TEST_MODE_MSB    25
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_TEST_MODE_LSB    24
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_TEST_MODE_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_TEST_MODE_DEFAULT    0x00000000
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_TEST_EN_MASK    0x00100000
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_TEST_EN_SHIFT    20
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_TEST_EN_MSB    20
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_TEST_EN_LSB    20
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_TEST_EN_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_TEST_EN_DEFAULT    0x00000000
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_PO_MASK    0x00080000
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_PO_SHIFT    19
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_PO_MSB    19
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_PO_LSB    19
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_PO_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_PO_DEFAULT    0x00000000
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_PI_MASK    0x00040000
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_PI_SHIFT    18
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_PI_MSB    18
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_PI_LSB    18
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_PI_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_PI_DEFAULT    0x00000000
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_CLK_MASK    0x00020000
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_CLK_SHIFT    17
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_CLK_MSB    17
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_CLK_LSB    17
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_CLK_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_CLK_DEFAULT    0x00000000
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_MASK    0x00010000
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_SHIFT    16
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_MSB    16
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_LSB    16
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_DEFAULT    0x00000000
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_ENABLE_DRIVERS_MASK    0x00001000
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_ENABLE_DRIVERS_SHIFT    12
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_ENABLE_DRIVERS_MSB    12
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_ENABLE_DRIVERS_LSB    12
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_ENABLE_DRIVERS_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_ENABLE_DRIVERS_DEFAULT    0x00000000
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_REF_CLK_MASK    0x00000800
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_REF_CLK_SHIFT    11
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_REF_CLK_MSB    11
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_REF_CLK_LSB    11
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_REF_CLK_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_REF_CLK_DEFAULT    0x00000000
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_SPI_CLK_MASK    0x00000400
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_SPI_CLK_SHIFT    10
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_SPI_CLK_MSB    10
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_SPI_CLK_LSB    10
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_SPI_CLK_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_SPI_CLK_DEFAULT    0x00000000
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_DR_CLK_MASK    0x00000200
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_DR_CLK_SHIFT    9
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_DR_CLK_MSB    9
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_DR_CLK_LSB    9
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_DR_CLK_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_DR_CLK_DEFAULT    0x00000000
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_CORE_CLK_MASK    0x00000100
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_CORE_CLK_SHIFT    8
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_CORE_CLK_MSB    8
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_CORE_CLK_LSB    8
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_CORE_CLK_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_CORE_CLK_DEFAULT    0x00000000
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_REF_CLK_SEL_MASK    0x00000018
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_REF_CLK_SEL_SHIFT    3
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_REF_CLK_SEL_MSB    4
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_REF_CLK_SEL_LSB    3
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_REF_CLK_SEL_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_REF_CLK_SEL_DEFAULT    0x00000000
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_SPI_CLK_SEL_MASK    0x00000004
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_SPI_CLK_SEL_SHIFT    2
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_SPI_CLK_SEL_MSB    2
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_SPI_CLK_SEL_LSB    2
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_SPI_CLK_SEL_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_SPI_CLK_SEL_DEFAULT    0x00000000
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_DR_CLK_SEL_MASK    0x00000002
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_DR_CLK_SEL_SHIFT    1
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_DR_CLK_SEL_MSB    1
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_DR_CLK_SEL_LSB    1
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_DR_CLK_SEL_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_DR_CLK_SEL_DEFAULT    0x00000000
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_CORE_CLK_SEL_MASK    0x00000001
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_CORE_CLK_SEL_SHIFT    0
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_CORE_CLK_SEL_MSB    0
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_CORE_CLK_SEL_LSB    0
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_CORE_CLK_SEL_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_CORE_CLK_SEL_DEFAULT    0x00000000
+
+/* ================================================================
+ * Field info for register KA_SC_SCAN_PLL_CTRL */
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_RIPPLE_RESET_MASK    0x00002000
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_RIPPLE_RESET_SHIFT    13
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_RIPPLE_RESET_MSB    13
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_RIPPLE_RESET_LSB    13
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_RIPPLE_RESET_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_RIPPLE_RESET_DEFAULT    0x00000000
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_RESET_MASK    0x00001000
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_RESET_SHIFT    12
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_RESET_MSB    12
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_RESET_LSB    12
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_RESET_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_RESET_DEFAULT    0x00000000
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_BYPASS_MASK    0x00000800
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_BYPASS_SHIFT    11
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_BYPASS_MSB    11
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_BYPASS_LSB    11
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_BYPASS_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_BYPASS_DEFAULT    0x00000000
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_ACBYPASS_MASK    0x00000400
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_ACBYPASS_SHIFT    10
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_ACBYPASS_MSB    10
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_ACBYPASS_LSB    10
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_ACBYPASS_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_ACBYPASS_DEFAULT    0x00000000
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_EXTCLK_MASK    0x00000200
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_EXTCLK_SHIFT    9
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_EXTCLK_MSB    9
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_EXTCLK_LSB    9
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_EXTCLK_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_EXTCLK_DEFAULT    0x00000000
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_BYPASS_MASK    0x00000100
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_BYPASS_SHIFT    8
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_BYPASS_MSB    8
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_BYPASS_LSB    8
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_BYPASS_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_BYPASS_DEFAULT    0x00000000
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_ACBYPASS_MASK    0x00000080
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_ACBYPASS_SHIFT    7
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_ACBYPASS_MSB    7
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_ACBYPASS_LSB    7
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_ACBYPASS_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_ACBYPASS_DEFAULT    0x00000000
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_EXTCLK_MASK    0x00000040
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_EXTCLK_SHIFT    6
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_EXTCLK_MSB    6
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_EXTCLK_LSB    6
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_EXTCLK_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_EXTCLK_DEFAULT    0x00000000
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_BYPASS_MASK    0x00000020
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_BYPASS_SHIFT    5
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_BYPASS_MSB    5
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_BYPASS_LSB    5
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_BYPASS_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_BYPASS_DEFAULT    0x00000000
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_ACBYPASS_MASK    0x00000010
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_ACBYPASS_SHIFT    4
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_ACBYPASS_MSB    4
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_ACBYPASS_LSB    4
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_ACBYPASS_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_ACBYPASS_DEFAULT    0x00000000
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_EXTCLK_MASK    0x00000008
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_EXTCLK_SHIFT    3
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_EXTCLK_MSB    3
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_EXTCLK_LSB    3
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_EXTCLK_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_EXTCLK_DEFAULT    0x00000000
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_M_N_SEL_MASK    0x00000007
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_M_N_SEL_SHIFT    0
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_M_N_SEL_MSB    2
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_M_N_SEL_LSB    0
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_M_N_SEL_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_M_N_SEL_DEFAULT    0x00000000
+
+/* ================================================================
+ * Field info for register KA_SC_SCAN_CORE_CLK_COUNT */
+#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_CLEAR_RIPPLE_CNT_N_MASK    0x02000000
+#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_CLEAR_RIPPLE_CNT_N_SHIFT    25
+#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_CLEAR_RIPPLE_CNT_N_MSB    25
+#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_CLEAR_RIPPLE_CNT_N_LSB    25
+#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_CLEAR_RIPPLE_CNT_N_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_CLEAR_RIPPLE_CNT_N_DEFAULT    0x00000000
+#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_ENABLE_RIPPLE_CNT_MASK    0x01000000
+#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_ENABLE_RIPPLE_CNT_SHIFT    24
+#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_ENABLE_RIPPLE_CNT_MSB    24
+#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_ENABLE_RIPPLE_CNT_LSB    24
+#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_ENABLE_RIPPLE_CNT_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_ENABLE_RIPPLE_CNT_DEFAULT    0x00000000
+#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_RIPPLE_COUNT_MASK    0x00ffffff
+#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_RIPPLE_COUNT_SHIFT    0
+#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_RIPPLE_COUNT_MSB    23
+#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_RIPPLE_COUNT_LSB    0
+#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_RIPPLE_COUNT_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_RIPPLE_COUNT_DEFAULT    0x00000000
+
+/* ================================================================
+ * Field info for register KA_SC_SCAN_DR_CLK_COUNT */
+#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_CLEAR_RIPPLE_CNT_N_MASK    0x02000000
+#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_CLEAR_RIPPLE_CNT_N_SHIFT    25
+#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_CLEAR_RIPPLE_CNT_N_MSB    25
+#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_CLEAR_RIPPLE_CNT_N_LSB    25
+#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_CLEAR_RIPPLE_CNT_N_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_CLEAR_RIPPLE_CNT_N_DEFAULT    0x00000000
+#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_ENABLE_RIPPLE_CNT_MASK    0x01000000
+#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_ENABLE_RIPPLE_CNT_SHIFT    24
+#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_ENABLE_RIPPLE_CNT_MSB    24
+#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_ENABLE_RIPPLE_CNT_LSB    24
+#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_ENABLE_RIPPLE_CNT_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_ENABLE_RIPPLE_CNT_DEFAULT    0x00000000
+#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_RIPPLE_COUNT_MASK    0x00ffffff
+#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_RIPPLE_COUNT_SHIFT    0
+#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_RIPPLE_COUNT_MSB    23
+#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_RIPPLE_COUNT_LSB    0
+#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_RIPPLE_COUNT_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_RIPPLE_COUNT_DEFAULT    0x00000000
+
+/* ================================================================
+ * Field info for register KA_SC_SCAN_SPI_CLK_COUNT */
+#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_CLEAR_RIPPLE_CNT_N_MASK    0x02000000
+#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_CLEAR_RIPPLE_CNT_N_SHIFT    25
+#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_CLEAR_RIPPLE_CNT_N_MSB    25
+#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_CLEAR_RIPPLE_CNT_N_LSB    25
+#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_CLEAR_RIPPLE_CNT_N_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_CLEAR_RIPPLE_CNT_N_DEFAULT    0x00000000
+#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_ENABLE_RIPPLE_CNT_MASK    0x01000000
+#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_ENABLE_RIPPLE_CNT_SHIFT    24
+#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_ENABLE_RIPPLE_CNT_MSB    24
+#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_ENABLE_RIPPLE_CNT_LSB    24
+#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_ENABLE_RIPPLE_CNT_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_ENABLE_RIPPLE_CNT_DEFAULT    0x00000000
+#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_RIPPLE_COUNT_MASK    0x00ffffff
+#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_RIPPLE_COUNT_SHIFT    0
+#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_RIPPLE_COUNT_MSB    23
+#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_RIPPLE_COUNT_LSB    0
+#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_RIPPLE_COUNT_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_RIPPLE_COUNT_DEFAULT    0x00000000
+
+/* ================================================================
+ * Field info for register KA_SC_SCAN_BRD_BRD_OUT_DATA */
+#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_DATA_BRD_OUT_MASK    0x001fffff
+#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_DATA_BRD_OUT_SHIFT    0
+#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_DATA_BRD_OUT_MSB    20
+#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_DATA_BRD_OUT_LSB    0
+#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_DATA_BRD_OUT_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_DATA_BRD_OUT_DEFAULT    0x00000000
+
+/* ================================================================
+ * Field info for register KA_SC_SCAN_BRD_BRD_OUT_ENABLE */
+#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_ENABLE_BRD_OUT_EN_MASK    0x001fffff
+#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_ENABLE_BRD_OUT_EN_SHIFT    0
+#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_ENABLE_BRD_OUT_EN_MSB    20
+#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_ENABLE_BRD_OUT_EN_LSB    0
+#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_ENABLE_BRD_OUT_EN_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_ENABLE_BRD_OUT_EN_DEFAULT    0x00000000
+
+/* ================================================================
+ * Field info for register KA_SC_SCAN_BRD_BRD_IN */
+#define SAND_HAL_KA_SC_SCAN_BRD_BRD_IN_BRD_IN_MASK    0x001fffff
+#define SAND_HAL_KA_SC_SCAN_BRD_BRD_IN_BRD_IN_SHIFT    0
+#define SAND_HAL_KA_SC_SCAN_BRD_BRD_IN_BRD_IN_MSB    20
+#define SAND_HAL_KA_SC_SCAN_BRD_BRD_IN_BRD_IN_LSB    0
+#define SAND_HAL_KA_SC_SCAN_BRD_BRD_IN_BRD_IN_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_KA_SC_SCAN_BRD_BRD_IN_BRD_IN_DEFAULT    0x00000000
+
+/* ================================================================
+ * Field info for register KA_SC_SCAN_MISC */
+#define SAND_HAL_KA_SC_SCAN_MISC_MARG_START_MASK    0x00000002
+#define SAND_HAL_KA_SC_SCAN_MISC_MARG_START_SHIFT    1
+#define SAND_HAL_KA_SC_SCAN_MISC_MARG_START_MSB    1
+#define SAND_HAL_KA_SC_SCAN_MISC_MARG_START_LSB    1
+#define SAND_HAL_KA_SC_SCAN_MISC_MARG_START_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_MISC_MARG_START_DEFAULT    0x00000000
+#define SAND_HAL_KA_SC_SCAN_MISC_MARG_READY_MASK    0x00000001
+#define SAND_HAL_KA_SC_SCAN_MISC_MARG_READY_SHIFT    0
+#define SAND_HAL_KA_SC_SCAN_MISC_MARG_READY_MSB    0
+#define SAND_HAL_KA_SC_SCAN_MISC_MARG_READY_LSB    0
+#define SAND_HAL_KA_SC_SCAN_MISC_MARG_READY_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_KA_SC_SCAN_MISC_MARG_READY_DEFAULT    0x00000000
+
+/* ================================================================
+ * Field info for register KA_SC_SCAN_INTERRUPT */
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_BME_TIMEOUT_MASK    0x00000010
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_BME_TIMEOUT_SHIFT    4
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_BME_TIMEOUT_MSB    4
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_BME_TIMEOUT_LSB    4
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_BME_TIMEOUT_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_BME_TIMEOUT_DEFAULT    0x00000000
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_OVER_TEMP_A_MASK    0x00000008
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_OVER_TEMP_A_SHIFT    3
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_OVER_TEMP_A_MSB    3
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_OVER_TEMP_A_LSB    3
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_OVER_TEMP_A_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_OVER_TEMP_A_DEFAULT    0x00000000
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_OVER_TEMP_B_MASK    0x00000004
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_OVER_TEMP_B_SHIFT    2
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_OVER_TEMP_B_MSB    2
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_OVER_TEMP_B_LSB    2
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_OVER_TEMP_B_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_OVER_TEMP_B_DEFAULT    0x00000000
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_POWER_FAIL_A_MASK    0x00000002
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_POWER_FAIL_A_SHIFT    1
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_POWER_FAIL_A_MSB    1
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_POWER_FAIL_A_LSB    1
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_POWER_FAIL_A_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_POWER_FAIL_A_DEFAULT    0x00000000
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_POWER_FAIL_B_MASK    0x00000001
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_POWER_FAIL_B_SHIFT    0
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_POWER_FAIL_B_MSB    0
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_POWER_FAIL_B_LSB    0
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_POWER_FAIL_B_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_POWER_FAIL_B_DEFAULT    0x00000000
+
+/* ================================================================
+ * Field info for register KA_SC_SCAN_INTERRUPT_MASK */
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_BME_TIMEOUT_DISINT_MASK    0x00000010
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_BME_TIMEOUT_DISINT_SHIFT    4
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_BME_TIMEOUT_DISINT_MSB    4
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_BME_TIMEOUT_DISINT_LSB    4
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_BME_TIMEOUT_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_BME_TIMEOUT_DISINT_DEFAULT    0x00000001
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_OVER_TEMP_A_DISINT_MASK    0x00000008
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_OVER_TEMP_A_DISINT_SHIFT    3
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_OVER_TEMP_A_DISINT_MSB    3
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_OVER_TEMP_A_DISINT_LSB    3
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_OVER_TEMP_A_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_OVER_TEMP_A_DISINT_DEFAULT    0x00000001
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_OVER_TEMP_B_DISINT_MASK    0x00000004
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_OVER_TEMP_B_DISINT_SHIFT    2
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_OVER_TEMP_B_DISINT_MSB    2
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_OVER_TEMP_B_DISINT_LSB    2
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_OVER_TEMP_B_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_OVER_TEMP_B_DISINT_DEFAULT    0x00000001
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_POWER_FAIL_A_DISINT_MASK    0x00000002
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_POWER_FAIL_A_DISINT_SHIFT    1
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_POWER_FAIL_A_DISINT_MSB    1
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_POWER_FAIL_A_DISINT_LSB    1
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_POWER_FAIL_A_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_POWER_FAIL_A_DISINT_DEFAULT    0x00000001
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_POWER_FAIL_B_DISINT_MASK    0x00000001
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_POWER_FAIL_B_DISINT_SHIFT    0
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_POWER_FAIL_B_DISINT_MSB    0
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_POWER_FAIL_B_DISINT_LSB    0
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_POWER_FAIL_B_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_POWER_FAIL_B_DISINT_DEFAULT    0x00000001
+
+/* ================================================================
+ * Field info for register KA_SC_SCAN_SCRATCH */
+#define SAND_HAL_KA_SC_SCAN_SCRATCH_TEST_BITS_MASK    0xffffffff
+#define SAND_HAL_KA_SC_SCAN_SCRATCH_TEST_BITS_SHIFT    0
+#define SAND_HAL_KA_SC_SCAN_SCRATCH_TEST_BITS_MSB    31
+#define SAND_HAL_KA_SC_SCAN_SCRATCH_TEST_BITS_LSB    0
+#define SAND_HAL_KA_SC_SCAN_SCRATCH_TEST_BITS_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_SCRATCH_TEST_BITS_DEFAULT    0x00000000
+
+/* ================================================================
+ * Field info for register KA_SC_SCAN_SCRATCH_MASK */
+#define SAND_HAL_KA_SC_SCAN_SCRATCH_MASK_TEST_BITS_DISINT_MASK    0xffffffff
+#define SAND_HAL_KA_SC_SCAN_SCRATCH_MASK_TEST_BITS_DISINT_SHIFT    0
+#define SAND_HAL_KA_SC_SCAN_SCRATCH_MASK_TEST_BITS_DISINT_MSB    31
+#define SAND_HAL_KA_SC_SCAN_SCRATCH_MASK_TEST_BITS_DISINT_LSB    0
+#define SAND_HAL_KA_SC_SCAN_SCRATCH_MASK_TEST_BITS_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_KA_SC_SCAN_SCRATCH_MASK_TEST_BITS_DISINT_DEFAULT    0xffffffff
+
+#endif /* matches #ifndef HAL_KA_SC_AUTO_H */
diff --git a/board/sandburst/karef/init.S b/board/sandburst/karef/init.S
new file mode 100644
index 0000000..b1d47a4
--- /dev/null
+++ b/board/sandburst/karef/init.S
@@ -0,0 +1,101 @@
+/*
+*  Copyright (C) 2005 Sandburst Corporation
+*
+* See file CREDITS for list of people who contributed to this
+* project.
+*
+* This program is free software; you can redistribute it and/or
+* modify it under the terms of the GNU General Public License as
+* published by the Free Software Foundation; either version 2 of
+* the License, or (at your option) any later version.
+*
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with this program; if not, write to the Free Software
+* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+* MA 02111-1307 USA
+*/
+/*
+ * Ported from Ebony init.S by Travis B. Sawyer
+ */
+
+#include <ppc_asm.tmpl>
+#include <config.h>
+
+/* General */
+#define TLB_VALID   0x00000200
+
+/* Supported page sizes */
+
+#define SZ_1K	    0x00000000
+#define SZ_4K	    0x00000010
+#define SZ_16K	    0x00000020
+#define SZ_64K	    0x00000030
+#define SZ_256K	    0x00000040
+#define SZ_1M	    0x00000050
+#define SZ_16M	    0x00000070
+#define SZ_256M	    0x00000090
+
+/* Storage attributes */
+#define SA_W	    0x00000800	    /* Write-through */
+#define SA_I	    0x00000400	    /* Caching inhibited */
+#define SA_M	    0x00000200	    /* Memory coherence */
+#define SA_G	    0x00000100	    /* Guarded */
+#define SA_E	    0x00000080	    /* Endian */
+
+/* Access control */
+#define AC_X	    0x00000024	    /* Execute */
+#define AC_W	    0x00000012	    /* Write */
+#define AC_R	    0x00000009	    /* Read */
+
+/* Some handy macros */
+
+#define EPN(e)		((e) & 0xfffffc00)
+#define TLB0(epn,sz)	( (EPN((epn)) | (sz) | TLB_VALID ) )
+#define TLB1(rpn,erpn)	( ((rpn)&0xfffffc00) | (erpn) )
+#define TLB2(a)		( (a)&0x00000fbf )
+
+#define tlbtab_start\
+	mflr    r1  ;\
+	bl 0f	    ;
+
+#define tlbtab_end\
+	.long 0, 0, 0	;   \
+0:	mflr    r0	;   \
+	mtlr    r1	;   \
+	blr		;
+
+#define tlbentry(epn,sz,rpn,erpn,attr)\
+	.long TLB0(epn,sz),TLB1(rpn,erpn),TLB2(attr)
+
+
+/**************************************************************************
+ * TLB TABLE
+ *
+ * This table is used by the cpu boot code to setup the initial tlb
+ * entries. Rather than make broad assumptions in the cpu source tree,
+ * this table lets each board set things up however they like.
+ *
+ *  Pointer to the table is returned in r1
+ *
+ *************************************************************************/
+
+	.section .bootpg,"ax"
+	.globl tlbtab
+
+tlbtab:
+	tlbtab_start
+	tlbentry( 0xf0000000, SZ_256M, 0xf0000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I)
+	tlbentry( CFG_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_R|AC_W|SA_G|SA_I)
+	tlbentry( CFG_ISRAM_BASE, SZ_256K, 0x80000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I)
+	tlbentry( CFG_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
+	tlbentry( CFG_SDRAM_BASE+0x10000000, SZ_256M, 0x10000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
+	tlbentry( CFG_SDRAM_BASE+0x20000000, SZ_256M, 0x20000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
+	tlbentry( CFG_SDRAM_BASE+0x30000000, SZ_256M, 0x30000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
+	tlbentry( CFG_PCI_BASE, SZ_256M, 0x00000000, 2, AC_R|AC_W|SA_G|SA_I )
+	tlbentry( CFG_PCI_MEMBASE, SZ_256M, 0x00000000, 3, AC_R|AC_W|SA_G|SA_I )
+	tlbtab_end
diff --git a/board/sandburst/karef/karef.c b/board/sandburst/karef/karef.c
new file mode 100644
index 0000000..7a98f5b
--- /dev/null
+++ b/board/sandburst/karef/karef.c
@@ -0,0 +1,607 @@
+/*
+ *  Copyright (C) 2005 Sandburst Corporation
+ *  Travis B. Sawyer
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <common.h>
+#include <command.h>
+#include "karef.h"
+#include "karef_version.h"
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <spd_sdram.h>
+#include <i2c.h>
+#include "../common/sb_common.h"
+#include "../common/ppc440gx_i2c.h"
+
+
+
+void fpga_init (void);
+
+KAREF_BOARD_ID_ST board_id_as[] =
+{
+	{"Undefined"},			     /* Not specified */
+	{"Kamino Reference Design"},
+	{"Reserved"},			     /* Reserved for future use */
+	{"Reserved"},			     /* Reserved for future use */
+};
+
+KAREF_BOARD_ID_ST ofem_board_id_as[] =
+{
+	{"Undefined"},
+	{"1x10 + 10x2"},
+	{"Reserved"},
+	{"Reserved"},
+};
+
+
+/*************************************************************************
+ *  board_early_init_f
+ *
+ *  Setup chip selects, initialize the Opto-FPGA, initialize
+ *  interrupt polarity and triggers.
+ *
+ ************************************************************************/
+int board_early_init_f (void)
+{
+	ppc440_gpio_regs_t *gpio_regs;
+
+	/* Enable GPIO interrupts */
+	mtsdr(sdr_pfc0, 0x00103E00);
+
+	/* Setup access for LEDs, and system topology info */
+	gpio_regs = (ppc440_gpio_regs_t *)CFG_GPIO_BASE;
+	gpio_regs->open_drain = SBCOMMON_GPIO_SYS_LEDS;
+	gpio_regs->tri_state  = SBCOMMON_GPIO_DBGLEDS;
+
+	/* Turn on all the leds for now */
+	gpio_regs->out = SBCOMMON_GPIO_LEDS;
+
+	/*--------------------------------------------------------------------+
+	  | Initialize EBC CONFIG
+	  +-------------------------------------------------------------------*/
+	mtebc(xbcfg,
+	      EBC_CFG_LE_UNLOCK	   | EBC_CFG_PTD_ENABLE |
+	      EBC_CFG_RTC_64PERCLK | EBC_CFG_ATC_PREVIOUS |
+	      EBC_CFG_DTC_PREVIOUS | EBC_CFG_CTC_PREVIOUS |
+	      EBC_CFG_EMC_DEFAULT  | EBC_CFG_PME_DISABLE |
+	      EBC_CFG_PR_32);
+
+	/*--------------------------------------------------------------------+
+	  | 1/2 MB FLASH. Initialize bank 0 with default values.
+	  +-------------------------------------------------------------------*/
+	mtebc(pb0ap,
+	      EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(8) |
+	      EBC_BXAP_BCE_DISABLE  | EBC_BXAP_CSN_ENCODE(1) |
+	      EBC_BXAP_OEN_ENCODE(1)| EBC_BXAP_WBN_ENCODE(1) |
+	      EBC_BXAP_WBF_ENCODE(1)| EBC_BXAP_TH_ENCODE(1) |
+	      EBC_BXAP_RE_DISABLED  | EBC_BXAP_BEM_WRITEONLY |
+	      EBC_BXAP_PEN_DISABLED);
+
+	mtebc(pb0cr, EBC_BXCR_BAS_ENCODE(CFG_FLASH_BASE) |
+	      EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_8BIT);
+	/*--------------------------------------------------------------------+
+	  | 8KB NVRAM/RTC. Initialize bank 1 with default values.
+	  +-------------------------------------------------------------------*/
+	mtebc(pb1ap,
+	      EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(10) |
+	      EBC_BXAP_BCE_DISABLE  | EBC_BXAP_CSN_ENCODE(1) |
+	      EBC_BXAP_OEN_ENCODE(1)| EBC_BXAP_WBN_ENCODE(1) |
+	      EBC_BXAP_WBF_ENCODE(1)| EBC_BXAP_TH_ENCODE(1) |
+	      EBC_BXAP_RE_DISABLED  | EBC_BXAP_BEM_WRITEONLY |
+	      EBC_BXAP_PEN_DISABLED);
+
+	mtebc(pb1cr, EBC_BXCR_BAS_ENCODE(0x48000000) |
+	      EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_8BIT);
+
+	/*--------------------------------------------------------------------+
+	  | Compact Flash, uses 2 Chip Selects (2 & 6)
+	  +-------------------------------------------------------------------*/
+	mtebc(pb2ap,
+	      EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(8) |
+	      EBC_BXAP_BCE_DISABLE  | EBC_BXAP_CSN_ENCODE(1) |
+	      EBC_BXAP_OEN_ENCODE(1)| EBC_BXAP_WBN_ENCODE(1) |
+	      EBC_BXAP_WBF_ENCODE(0)| EBC_BXAP_TH_ENCODE(1) |
+	      EBC_BXAP_RE_DISABLED  | EBC_BXAP_BEM_WRITEONLY |
+	      EBC_BXAP_PEN_DISABLED);
+
+	mtebc(pb2cr, EBC_BXCR_BAS_ENCODE(0xF0000000) |
+	      EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_16BIT);
+
+	/*--------------------------------------------------------------------+
+	  | KaRef Scan FPGA. Initialize bank 3 with default values.
+	  +-------------------------------------------------------------------*/
+	mtebc(pb5ap,
+	      EBC_BXAP_RE_ENABLED    | EBC_BXAP_SOR_NONDELAYED |
+	      EBC_BXAP_BME_DISABLED  | EBC_BXAP_TWT_ENCODE(3) |
+	      EBC_BXAP_TH_ENCODE(1)  | EBC_BXAP_WBF_ENCODE(0) |
+	      EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_PEN_DISABLED |
+	      EBC_BXAP_OEN_ENCODE(1) | EBC_BXAP_BEM_RW);
+
+	mtebc(pb5cr, EBC_BXCR_BAS_ENCODE(0x48200000) |
+	      EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_32BIT);
+
+	/*--------------------------------------------------------------------+
+	  | MAC A & B for Kamino.  OFEM FPGA decodes the addresses
+	  | Initialize bank 4 with default values.
+	  +-------------------------------------------------------------------*/
+	mtebc(pb4ap,
+	      EBC_BXAP_RE_ENABLED    | EBC_BXAP_SOR_NONDELAYED |
+	      EBC_BXAP_BME_DISABLED  | EBC_BXAP_TWT_ENCODE(3) |
+	      EBC_BXAP_TH_ENCODE(1)  | EBC_BXAP_WBF_ENCODE(0) |
+	      EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_PEN_DISABLED |
+	      EBC_BXAP_OEN_ENCODE(1) | EBC_BXAP_BEM_RW);
+
+	mtebc(pb4cr, EBC_BXCR_BAS_ENCODE(0x48600000) |
+	      EBC_BXCR_BS_2MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_32BIT);
+
+	/*--------------------------------------------------------------------+
+	  | OFEM FPGA  Initialize bank 5 with default values.
+	  +-------------------------------------------------------------------*/
+	mtebc(pb3ap,
+	      EBC_BXAP_RE_ENABLED    | EBC_BXAP_SOR_NONDELAYED |
+	      EBC_BXAP_BME_DISABLED  | EBC_BXAP_TWT_ENCODE(3) |
+	      EBC_BXAP_TH_ENCODE(1)  | EBC_BXAP_WBF_ENCODE(0) |
+	      EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_PEN_DISABLED |
+	      EBC_BXAP_OEN_ENCODE(1) | EBC_BXAP_BEM_RW);
+
+
+	mtebc(pb3cr, EBC_BXCR_BAS_ENCODE(0x48400000) |
+	      EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_32BIT);
+
+
+	/*--------------------------------------------------------------------+
+	  | Compact Flash, uses 2 Chip Selects (2 & 6)
+	  +-------------------------------------------------------------------*/
+	mtebc(pb6ap,
+	      EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(8) |
+	      EBC_BXAP_BCE_DISABLE  | EBC_BXAP_CSN_ENCODE(1) |
+	      EBC_BXAP_OEN_ENCODE(1)| EBC_BXAP_WBN_ENCODE(1) |
+	      EBC_BXAP_WBF_ENCODE(0)| EBC_BXAP_TH_ENCODE(1) |
+	      EBC_BXAP_RE_DISABLED  | EBC_BXAP_BEM_WRITEONLY |
+	      EBC_BXAP_PEN_DISABLED);
+
+	mtebc(pb6cr, EBC_BXCR_BAS_ENCODE(0xF0100000) |
+	      EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_16BIT);
+
+	/*--------------------------------------------------------------------+
+	  | BME-32. Initialize bank 7 with default values.
+	  +-------------------------------------------------------------------*/
+	mtebc(pb7ap,
+	      EBC_BXAP_RE_ENABLED    | EBC_BXAP_SOR_NONDELAYED |
+	      EBC_BXAP_BME_DISABLED  | EBC_BXAP_TWT_ENCODE(3) |
+	      EBC_BXAP_TH_ENCODE(1)  | EBC_BXAP_WBF_ENCODE(0) |
+	      EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_PEN_DISABLED |
+	      EBC_BXAP_OEN_ENCODE(1) | EBC_BXAP_BEM_RW);
+
+	mtebc(pb7cr, EBC_BXCR_BAS_ENCODE(0x48500000) |
+	      EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_32BIT);
+
+
+	/*--------------------------------------------------------------------+
+	 * Setup the interrupt controller polarities, triggers, etc.
+	 +-------------------------------------------------------------------*/
+	mtdcr (uic0sr, 0xffffffff);	/* clear all */
+	mtdcr (uic0er, 0x00000000);	/* disable all */
+	mtdcr (uic0cr, 0x00000000);	/* all non- critical */
+	mtdcr (uic0pr, 0xfffffe03);	/* polarity */
+	mtdcr (uic0tr, 0x01c00000);	/* trigger edge vs level */
+	mtdcr (uic0vr, 0x00000001);	/* int31 highest, base=0x000 */
+	mtdcr (uic0sr, 0xffffffff);	/* clear all */
+
+	mtdcr (uic1sr, 0xffffffff);	/* clear all */
+	mtdcr (uic1er, 0x00000000);	/* disable all */
+	mtdcr (uic1cr, 0x00000000);	/* all non-critical */
+	mtdcr (uic1pr, 0xffffc8ff);	/* polarity */
+	mtdcr (uic1tr, 0x00ff0000);	/* trigger edge vs level */
+	mtdcr (uic1vr, 0x00000001);	/* int31 highest, base=0x000 */
+	mtdcr (uic1sr, 0xffffffff);	/* clear all */
+
+	mtdcr (uic2sr, 0xffffffff);	/* clear all */
+	mtdcr (uic2er, 0x00000000);	/* disable all */
+	mtdcr (uic2cr, 0x00000000);	/* all non-critical */
+	mtdcr (uic2pr, 0xffff83ff);	/* polarity */
+	mtdcr (uic2tr, 0x00ff8c0f);	/* trigger edge vs level */
+	mtdcr (uic2vr, 0x00000001);	/* int31 highest, base=0x000 */
+	mtdcr (uic2sr, 0xffffffff);	/* clear all */
+
+	mtdcr (uicb0sr, 0xfc000000);	/* clear all */
+	mtdcr (uicb0er, 0x00000000);	/* disable all */
+	mtdcr (uicb0cr, 0x00000000);	/* all non-critical */
+	mtdcr (uicb0pr, 0xfc000000);
+	mtdcr (uicb0tr, 0x00000000);
+	mtdcr (uicb0vr, 0x00000001);
+
+	fpga_init();
+
+	return 0;
+}
+
+
+/*************************************************************************
+ *  checkboard
+ *
+ *  Dump pertinent info to the console
+ *
+ ************************************************************************/
+int checkboard (void)
+{
+	sys_info_t sysinfo;
+	unsigned char brd_rev, brd_id;
+	unsigned short sernum;
+	unsigned char scan_rev, scan_id, ofem_rev, ofem_id;
+	unsigned char ofem_brd_rev, ofem_brd_id;
+	KAREF_FPGA_REGS_ST *karef_ps;
+	OFEM_FPGA_REGS_ST *ofem_ps;
+
+	karef_ps = (KAREF_FPGA_REGS_ST *)CFG_KAREF_FPGA_BASE;
+	ofem_ps = (OFEM_FPGA_REGS_ST *)CFG_OFEM_FPGA_BASE;
+
+	scan_id = (unsigned char)((karef_ps->revision_ul &
+				   SAND_HAL_KA_SC_SCAN_REVISION_IDENTIFICATION_MASK)
+				  >> SAND_HAL_KA_SC_SCAN_REVISION_IDENTIFICATION_SHIFT);
+
+	scan_rev = (unsigned char)((karef_ps->revision_ul & SAND_HAL_KA_SC_SCAN_REVISION_REVISION_MASK)
+				   >> SAND_HAL_KA_SC_SCAN_REVISION_REVISION_SHIFT);
+
+	brd_rev = (unsigned char)((karef_ps->boardinfo_ul & SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_REV_MASK)
+				  >> SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_REV_SHIFT);
+
+	brd_id = (unsigned char)((karef_ps->boardinfo_ul & SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_ID_MASK)
+				 >> SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_ID_SHIFT);
+
+	ofem_brd_id = (unsigned char)((karef_ps->boardinfo_ul & SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_ID_MASK)
+				      >> SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_ID_SHIFT);
+
+	ofem_brd_rev = (unsigned char)((karef_ps->boardinfo_ul & SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_REV_MASK)
+				       >> SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_REV_SHIFT);
+
+	if (0xF != ofem_brd_id) {
+		ofem_id = (unsigned char)((ofem_ps->revision_ul &
+					   SAND_HAL_KA_OF_OFEM_REVISION_IDENTIFICATION_MASK)
+					  >> SAND_HAL_KA_OF_OFEM_REVISION_IDENTIFICATION_SHIFT);
+
+		ofem_rev = (unsigned char)((ofem_ps->revision_ul &
+					    SAND_HAL_KA_OF_OFEM_REVISION_REVISION_MASK)
+					   >> SAND_HAL_KA_OF_OFEM_REVISION_REVISION_SHIFT);
+	}
+
+	get_sys_info (&sysinfo);
+
+	sernum = sbcommon_get_serial_number();
+
+	printf ("Board: Sandburst Corporation Kamino Reference Design "
+		"Serial Number: %d\n", sernum);
+	printf ("%s\n", KAREF_U_BOOT_REL_STR);
+
+	printf ("Built %s %s by %s\n", __DATE__, __TIME__, BUILDUSER);
+	if (sbcommon_get_master()) {
+		printf("Slot 0 - Master\nSlave board");
+		if (sbcommon_secondary_present())
+			printf(" present\n");
+		else
+			printf(" not detected\n");
+	} else {
+		printf("Slot 1 - Slave\n\n");
+	}
+
+	printf ("ScanFPGA ID:\t0x%02X\tRev:  0x%02X\n", scan_id, scan_rev);
+	printf ("Board Rev:\t0x%02X\tID:   0x%02X\n", brd_rev, brd_id);
+	if(0xF != ofem_brd_id) {
+		printf("OFemFPGA ID:\t0x%02X\tRev:  0x%02X\n", ofem_id, ofem_rev);
+		printf("OFEM Board Rev:\t0x%02X\tID:   0x%02X\n", ofem_brd_id, ofem_brd_rev);
+	}
+
+	printf ("\tVCO: %lu MHz\n", sysinfo.freqVCOMhz / 1000000);
+	printf ("\tCPU: %lu MHz\n", sysinfo.freqProcessor / 1000000);
+	printf ("\tPLB: %lu MHz\n", sysinfo.freqPLB / 1000000);
+	printf ("\tOPB: %lu MHz\n", sysinfo.freqOPB / 1000000);
+	printf ("\tEPB: %lu MHz\n", sysinfo.freqEPB / 1000000);
+
+	/* Fix the ack in the bme 32 */
+	udelay(5000);
+	out32(CFG_BME32_BASE + 0x0000000C, 0x00000001);
+	asm("eieio");
+
+
+	return (0);
+}
+
+
+/*************************************************************************
+ *  misc_init_f
+ *
+ *  Initialize I2C bus one to gain access to the fans
+ *
+ ************************************************************************/
+int misc_init_f (void)
+{
+	/* Turn on i2c bus 1 */
+	puts ("I2C1:  ");
+	i2c1_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+	puts ("ready\n");
+
+	/* Turn on fans 3 & 4 */
+	sbcommon_fans();
+
+	return (0);
+}
+/*************************************************************************
+ *  misc_init_r
+ *
+ *  Do nothing.
+ *
+ ************************************************************************/
+int misc_init_r (void)
+{
+	unsigned short sernum;
+	char envstr[255];
+	KAREF_FPGA_REGS_ST *karef_ps;
+	OFEM_FPGA_REGS_ST *ofem_ps;
+	unsigned char ofem_id;
+
+	if(NULL != getenv("secondserial")) {
+		puts("secondserial is set, switching to second serial port\n");
+		setenv("stderr", "serial1");
+		setenv("stdout", "serial1");
+		setenv("stdin", "serial1");
+	}
+
+	setenv("ubrelver", KAREF_U_BOOT_REL_STR);
+
+	memset(envstr, 0, 255);
+	sprintf (envstr, "Built %s %s by %s", __DATE__, __TIME__, BUILDUSER);
+	setenv("bldstr", envstr);
+	saveenv();
+
+	if( getenv("autorecover")) {
+		setenv("autorecover", NULL);
+		saveenv();
+		sernum = sbcommon_get_serial_number();
+
+		printf("\nSetting up environment for automatic filesystem recovery\n");
+		/*
+		 * Setup default bootargs
+		 */
+		memset(envstr, 0, 255);
+
+		sprintf(envstr, "console=ttyS0,9600 root=/dev/ram0 "
+			"rw ip=10.100.70.%d:::255.255.0.0:karef%d:eth0:none idebus=33",
+			sernum, sernum);
+		setenv("bootargs", envstr);
+
+		/*
+		 * Setup Default boot command
+		 */
+		setenv("bootcmd", "fatload ide 0 8000000 uimage.karef;"
+		       "fatload ide 0 8100000 pramdisk;"
+		       "bootm 8000000 8100000");
+
+		printf("Done.  Please type allow the system to continue to boot\n");
+	}
+
+	if( getenv("fakeled")) {
+		karef_ps = (KAREF_FPGA_REGS_ST *)CFG_KAREF_FPGA_BASE;
+		ofem_ps = (OFEM_FPGA_REGS_ST *)CFG_OFEM_FPGA_BASE;
+		ofem_ps->control_ul &= ~SAND_HAL_KA_SC_SCAN_CNTL_FAULT_LED_MASK;
+		karef_ps->control_ul &= ~SAND_HAL_KA_OF_OFEM_CNTL_FAULT_LED_MASK;
+		setenv("bootdelay", "-1");
+		saveenv();
+		printf("fakeled is set. use 'setenv fakeled ; setenv bootdelay 5 ; saveenv' to recover\n");
+	}
+
+
+
+
+	return (0);
+}
+
+
+
+
+/*************************************************************************
+ *  ide_set_reset
+ *
+ *
+ *
+ ************************************************************************/
+#ifdef CONFIG_IDE_RESET
+void ide_set_reset(int on)
+{
+	KAREF_FPGA_REGS_ST *karef_ps;
+	/* TODO: ide reset */
+	karef_ps = (KAREF_FPGA_REGS_ST *)CFG_KAREF_FPGA_BASE;
+
+	if (on) {
+		karef_ps->reset_ul &= ~SAND_HAL_KA_SC_SCAN_RESET_CF_RESET_N_MASK;
+	} else {
+		karef_ps->reset_ul |= SAND_HAL_KA_SC_SCAN_RESET_CF_RESET_N_MASK;
+	}
+}
+#endif /* CONFIG_IDE_RESET */
+
+/*************************************************************************
+ *  fpga_init
+ *
+ *
+ *
+ ************************************************************************/
+void fpga_init(void)
+{
+	KAREF_FPGA_REGS_ST *karef_ps;
+	OFEM_FPGA_REGS_ST *ofem_ps;
+	unsigned char ofem_id;
+	unsigned long tmp;
+
+	/* Ensure we have power all around */
+	udelay(500);
+
+	karef_ps = (KAREF_FPGA_REGS_ST *)CFG_KAREF_FPGA_BASE;
+	tmp =
+		SAND_HAL_KA_SC_SCAN_RESET_CF_RESET_N_MASK |
+		SAND_HAL_KA_SC_SCAN_RESET_BME_RESET_N_MASK |
+		SAND_HAL_KA_SC_SCAN_RESET_KA_RESET_N_MASK |
+		SAND_HAL_KA_SC_SCAN_RESET_SLAVE_RESET_N_MASK |
+		SAND_HAL_KA_SC_SCAN_RESET_OFEM_RESET_N_MASK |
+		SAND_HAL_KA_SC_SCAN_RESET_IFE_A_RESET_N_MASK |
+		SAND_HAL_KA_SC_SCAN_RESET_I2C_MUX1_RESET_N_MASK |
+		SAND_HAL_KA_SC_SCAN_RESET_PHY0_RESET_N_MASK |
+		SAND_HAL_KA_SC_SCAN_RESET_PHY1_RESET_N_MASK;
+
+	karef_ps->reset_ul = tmp;
+
+	/*
+	 * Wait a bit to allow the ofem fpga to get its brains
+	 */
+	udelay(5000);
+
+	/*
+	 * Check to see if the ofem is there
+	 */
+	ofem_id = (unsigned char)((karef_ps->boardinfo_ul & SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_ID_MASK)
+				  >> SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_ID_SHIFT);
+	if(0xF != ofem_id) {
+		tmp =
+			SAND_HAL_KA_OF_OFEM_RESET_I2C_MUX0_RESET_N_MASK |
+			SAND_HAL_KA_OF_OFEM_RESET_LOCH0_RESET_N_MASK |
+			SAND_HAL_KA_OF_OFEM_RESET_MAC0_RESET_N_MASK;
+
+		ofem_ps = (OFEM_FPGA_REGS_ST *)CFG_OFEM_FPGA_BASE;
+		ofem_ps->reset_ul = tmp;
+
+		ofem_ps->control_ul |= 1 < SAND_HAL_KA_OF_OFEM_CNTL_FAULT_LED_SHIFT;
+	}
+
+	karef_ps->control_ul |= 1 << SAND_HAL_KA_SC_SCAN_CNTL_FAULT_LED_SHIFT;
+
+	asm("eieio");
+
+	return;
+}
+
+
+
+int karefSetupVars(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	unsigned short sernum;
+	char envstr[255];
+
+	sernum = sbcommon_get_serial_number();
+
+	memset(envstr, 0, 255);
+	/*
+	 * Setup our ip address
+	 */
+	sprintf(envstr, "10.100.70.%d", sernum);
+
+	setenv("ipaddr", envstr);
+	/*
+	 * Setup the host ip address
+	 */
+	setenv("serverip", "10.100.17.10");
+
+	/*
+	 * Setup default bootargs
+	 */
+	memset(envstr, 0, 255);
+
+	sprintf(envstr, "console=ttyS0,9600 root=/dev/nfs "
+		"rw nfsroot=10.100.17.10:/home/metrobox/mbc70.%d "
+		"nfsaddrs=10.100.70.%d:10.100.17.10:10.100.1.1:"
+		"255.255.0.0:karef%d.sandburst.com:eth0:none idebus=33",
+		sernum, sernum, sernum);
+
+	setenv("bootargs_nfs", envstr);
+	setenv("bootargs", envstr);
+
+	/*
+	 * Setup CF bootargs
+	 */
+	memset(envstr, 0, 255);
+
+	sprintf(envstr, "console=ttyS0,9600 root=/dev/hda2 "
+		"rw ip=10.100.70.%d:::255.255.0.0:karef%d:eth0:none idebus=33",
+		sernum, sernum);
+
+	setenv("bootargs_cf", envstr);
+
+	/*
+	 * Setup Default boot command
+	 */
+	setenv("bootcmd_tftp", "tftp 8000000 uImage.karef;bootm 8000000");
+	setenv("bootcmd", "tftp 8000000 uImage.karef;bootm 8000000");
+
+	/*
+	 * Setup compact flash boot command
+	 */
+	setenv("bootcmd_cf", "fatload ide 0 8000000 uimage.karef;bootm 8000000");
+
+	saveenv();
+
+	return(1);
+}
+
+
+int karefRecover(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	unsigned short sernum;
+	char envstr[255];
+
+	sernum = sbcommon_get_serial_number();
+
+	printf("\nSetting up environment for filesystem recovery\n");
+	/*
+	 * Setup default bootargs
+	 */
+	memset(envstr, 0, 255);
+
+	sprintf(envstr, "console=ttyS0,9600 root=/dev/ram0 "
+		"rw ip=10.100.70.%d:::255.255.0.0:karef%d:eth0:none",
+		sernum, sernum);
+	setenv("bootargs", envstr);
+
+	/*
+	 * Setup Default boot command
+	 */
+
+	setenv("bootcmd", "fatload ide 0 8000000 uimage.karef;"
+	       "fatload ide 0 8100000 pramdisk;"
+	       "bootm 8000000 8100000");
+
+	printf("Done.  Please type boot<cr>.\nWhen the kernel has booted"
+	       " please type fsrecover.sh<cr>\n");
+
+	return(1);
+}
+
+
+
+
+
+
+
+U_BOOT_CMD(kasetup, 1, 1, karefSetupVars,
+	   "kasetup - Set environment to factory defaults\n", NULL);
+
+U_BOOT_CMD(karecover, 1, 1, karefRecover,
+	   "karecover - Set environment to allow for fs recovery\n", NULL);
+
diff --git a/board/sandburst/karef/karef.h b/board/sandburst/karef/karef.h
new file mode 100644
index 0000000..7790819
--- /dev/null
+++ b/board/sandburst/karef/karef.h
@@ -0,0 +1,76 @@
+#ifndef __KAREF_H__
+#define __KAREF_H__
+/*
+ * (C) Copyright 2005
+ * Sandburst Corporation
+ * Travis B. Sawyer
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* Ka Reference Design OFEM FPGA Registers & definitions */
+#include "hal_ka_sc_auto.h"
+#include "hal_ka_of_auto.h"
+
+typedef struct karef_board_id_s {
+	const char name[40];
+} KAREF_BOARD_ID_ST, *KAREF_BOARD_ID_PST;
+
+/* SCAN FPGA */
+typedef struct karef_fpga_regs_s
+{
+    volatile unsigned long revision_ul;       /* Read Only  */
+    volatile unsigned long reset_ul;          /* Read/Write */
+    volatile unsigned long interrupt_ul;      /* Read Only  */
+    volatile unsigned long mask_ul;           /* Read/Write */
+    volatile unsigned long scratch_ul;        /* Read/Write */
+    volatile unsigned long scrmask_ul;        /* Read/Write */
+    volatile unsigned long status_ul;         /* Read Only  */
+    volatile unsigned long control_ul;        /* Read/Write */
+    volatile unsigned long boardinfo_ul;      /* Read Only  */
+    volatile unsigned long scan_from0_ul;     /* Read Only  */
+    volatile unsigned long scan_from1_ul;     /* Read Only  */
+    volatile unsigned long scan_to0_ul;       /* Read/Write */
+    volatile unsigned long scan_to1_ul;       /* Read/Write */
+    volatile unsigned long scan_control_ul;   /* Read/Write */
+    volatile unsigned long pll_control_ul;    /* Read/Write */
+    volatile unsigned long core_clock_cnt_ul; /* Read/Write */
+    volatile unsigned long dr_clock_cnt_ul;   /* Read/Write */
+    volatile unsigned long spi_clock_cnt_ul;  /* Read/Write */
+    volatile unsigned long brdout_data_ul;    /* Read/Write */
+    volatile unsigned long brdout_enable_ul;  /* Read/Write */
+    volatile unsigned long brdin_data_ul;     /* Read Only  */
+    volatile unsigned long misc_ul;           /* Read/Write */
+} KAREF_FPGA_REGS_ST __attribute__((packed)), * KAREF_FPGA_REGS_PST;
+
+/* OFEM FPGA */
+typedef struct ofem_fpga_regs_s
+{
+    volatile unsigned long revision_ul;       /* Read Only  */
+    volatile unsigned long reset_ul;          /* Read/Write */
+    volatile unsigned long interrupt_ul;      /* Read Only  */
+    volatile unsigned long mask_ul;           /* Read/Write */
+    volatile unsigned long scratch_ul;        /* Read/Write */
+    volatile unsigned long scrmask_ul;        /* Read/Write */
+    volatile unsigned long control_ul;        /* Read/Write */
+    volatile unsigned long mac_flow_ctrl_ul;  /* Read/Write */
+} OFEM_FPGA_REGS_ST __attribute__((packed)), * OFEM_FPGA_REGS_PST;
+
+
+#endif /* __KAREF_H__ */
diff --git a/board/sandburst/karef/karef_version.h b/board/sandburst/karef/karef_version.h
new file mode 100644
index 0000000..9960b9a
--- /dev/null
+++ b/board/sandburst/karef/karef_version.h
@@ -0,0 +1,26 @@
+#ifndef _KAREF_VERSION_H_
+#define _KAREF_VERSION_H_
+/*
+ *  Copyright (C) 2005 Sandburst Corporation
+ *  Travis B. Sawyer
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#define KAREF_U_BOOT_REL_STR "Release 0.0.7"
+#endif
diff --git a/board/sandburst/karef/u-boot.lds b/board/sandburst/karef/u-boot.lds
new file mode 100644
index 0000000..ff8658f
--- /dev/null
+++ b/board/sandburst/karef/u-boot.lds
@@ -0,0 +1,156 @@
+/*
+ * (C) Copyright 2005
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ * Travis B. Sawyer, Sandburst Corporation, tsawyer@sandburst.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  .resetvec 0xFFFFFFFC :
+  {
+    *(.resetvec)
+  } = 0xffff
+
+  .bootpg 0xFFFFF000 :
+  {
+    cpu/ppc4xx/start.o	(.bootpg)
+  } = 0xffff
+
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)	}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)	}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)	}
+  .rela.got      : { *(.rela.got)	}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)	}
+  .rela.bss      : { *(.rela.bss)	}
+  .rel.plt       : { *(.rel.plt)	}
+  .rela.plt      : { *(.rela.plt)	}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    /* WARNING - the following is hand-optimized to fit within	*/
+    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
+
+    cpu/ppc4xx/start.o	(.text)
+    board/sandburst/karef/init.o	(.text)
+    cpu/ppc4xx/kgdb.o	(.text)
+    cpu/ppc4xx/traps.o	(.text)
+    cpu/ppc4xx/interrupts.o	(.text)
+    cpu/ppc4xx/serial.o	(.text)
+    cpu/ppc4xx/cpu_init.o	(.text)
+    cpu/ppc4xx/speed.o	(.text)
+    cpu/ppc4xx/440gx_enet.o	(.text)
+    common/dlmalloc.o	(.text)
+    lib_generic/crc32.o		(.text)
+    lib_ppc/extable.o	(.text)
+    lib_generic/zlib.o		(.text)
+
+/*    . = env_offset;*/
+/*    common/environment.o(.text)*/
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}
diff --git a/board/sandburst/karef/u-boot.lds.debug b/board/sandburst/karef/u-boot.lds.debug
new file mode 100644
index 0000000..c6522b9
--- /dev/null
+++ b/board/sandburst/karef/u-boot.lds.debug
@@ -0,0 +1,145 @@
+/*
+ * (C) Copyright 2002-2005
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ * Travis B. Sawyer, Sandburst Corporation, tsawyer@sandburst.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)	}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)	}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)	}
+  .rela.got      : { *(.rela.got)	}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)	}
+  .rela.bss      : { *(.rela.bss)	}
+  .rel.plt       : { *(.rel.plt)	}
+  .rela.plt      : { *(.rela.plt)	}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    /* WARNING - the following is hand-optimized to fit within	*/
+    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
+
+    cpu/ppc4xx/start.o	(.text)
+    board/sandburst/karef/init.o (.text)
+    cpu/ppc4xx/kgdb.o	(.text)
+    cpu/ppc4xx/traps.o	(.text)
+    cpu/ppc4xx/interrupts.o	(.text)
+    cpu/ppc4xx/serial.o	(.text)
+    cpu/ppc4xx/cpu_init.o	(.text)
+    cpu/ppc4xx/speed.o	(.text)
+    cpu/ppc4xx/440gx_enet.o	(.text)
+    common/dlmalloc.o	(.text)
+    lib_generic/crc32.o		(.text)
+    lib_ppc/extable.o	(.text)
+    lib_generic/zlib.o		(.text)
+
+/*    common/environment.o(.text) */
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x0FFF) & 0xFFFFF000;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}
diff --git a/board/sandburst/metrobox/Makefile b/board/sandburst/metrobox/Makefile
new file mode 100644
index 0000000..06a9a22
--- /dev/null
+++ b/board/sandburst/metrobox/Makefile
@@ -0,0 +1,57 @@
+#
+# (C) Copyright 2005
+# Travis B. Sawyer, Sandburst Corporation, tsawyer@sandburst.com
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+# TBS: add for debugging purposes
+BUILDUSER := $(shell whoami)
+FORCEBUILD := $(shell rm -f $(LIB) $(BOARD).o)
+
+CFLAGS += -DBUILDUSER='"$(BUILDUSER)"'
+# TBS: end debugging
+
+
+LIB	= lib$(BOARD).a
+
+OBJS	= $(BOARD).o ../common/flash.o ../common/ppc440gx_i2c.o \
+	../common/sb_common.o
+SOBJS	= init.o
+
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) crv $@ $(OBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend *~
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
diff --git a/board/sandburst/metrobox/config.mk b/board/sandburst/metrobox/config.mk
new file mode 100644
index 0000000..91aee2f
--- /dev/null
+++ b/board/sandburst/metrobox/config.mk
@@ -0,0 +1,38 @@
+#
+# (C) Copyright 2005
+# Travis B. Sawyer, Sandburst Corporation, tsawyer@sandburst.com
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+ifeq ($(ramsym),1)
+TEXT_BASE = 0x07FD0000
+else
+TEXT_BASE = 0xFFF80000
+endif
+
+PLATFORM_CPPFLAGS += -DCONFIG_440=1
+
+ifeq ($(debug),1)
+PLATFORM_CPPFLAGS += -DDEBUG
+endif
+
+ifeq ($(dbcr),1)
+PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
+endif
diff --git a/board/sandburst/metrobox/hal_xc_auto.h b/board/sandburst/metrobox/hal_xc_auto.h
new file mode 100644
index 0000000..c99b38c
--- /dev/null
+++ b/board/sandburst/metrobox/hal_xc_auto.h
@@ -0,0 +1,553 @@
+/* ****************************************************************
+ * Common defs for reg spec for chip xc
+ * Auto-generated by trex2: DO NOT HAND-EDIT!!
+ * ****************************************************************
+ */
+
+#ifndef HAL_XC_AUTO_H
+#define HAL_XC_AUTO_H
+
+/* ----------------------------------------------------------------
+ * For block: 'xcvr_cntl'
+ */
+
+/* ---- Block instance addressing (for block-select) */
+#define XCVR_CNTL_BLOCK_ADDR_BIT_L 6
+#define XCVR_CNTL_BLOCK_ADDR_BIT_H 9
+#define XCVR_CNTL_BLOCK_ADDR_WIDTH 4
+
+#define  XCVR_CNTL_ADDR  0x0
+
+/* ---- Reg addressing (within block) */
+#define XCVR_CNTL_REG_ADDR_BIT_L 2
+#define XCVR_CNTL_REG_ADDR_BIT_H 5
+#define XCVR_CNTL_REG_ADDR_WIDTH 4
+
+
+/* ================================================================
+ * ---- Register XC_XCVR_CNTL_REVISION */
+#define SAND_HAL_XC_XCVR_CNTL_REVISION_OFFSET    0x000
+#ifndef SAND_HAL_XC_XCVR_CNTL_REVISION_NO_TEST_MASK
+#define SAND_HAL_XC_XCVR_CNTL_REVISION_NO_TEST_MASK    0x000
+#endif
+#define SAND_HAL_XC_XCVR_CNTL_REVISION_MASK    0xffffffff
+#define SAND_HAL_XC_XCVR_CNTL_REVISION_MSB     31
+#define SAND_HAL_XC_XCVR_CNTL_REVISION_LSB      0
+
+/* ================================================================
+ * ---- Register XC_XCVR_CNTL_RESET */
+#define SAND_HAL_XC_XCVR_CNTL_RESET_OFFSET    0x004
+#ifndef SAND_HAL_XC_XCVR_CNTL_RESET_NO_TEST_MASK
+#define SAND_HAL_XC_XCVR_CNTL_RESET_NO_TEST_MASK    0x000
+#endif
+#define SAND_HAL_XC_XCVR_CNTL_RESET_MASK    0xffffffff
+#define SAND_HAL_XC_XCVR_CNTL_RESET_MSB     31
+#define SAND_HAL_XC_XCVR_CNTL_RESET_LSB      0
+
+/* ================================================================
+ * ---- Register XC_XCVR_CNTL_STATUS */
+#define SAND_HAL_XC_XCVR_CNTL_STATUS_OFFSET    0x008
+#ifndef SAND_HAL_XC_XCVR_CNTL_STATUS_NO_TEST_MASK
+#define SAND_HAL_XC_XCVR_CNTL_STATUS_NO_TEST_MASK    0x000
+#endif
+#define SAND_HAL_XC_XCVR_CNTL_STATUS_MASK    0xffffffff
+#define SAND_HAL_XC_XCVR_CNTL_STATUS_MSB     31
+#define SAND_HAL_XC_XCVR_CNTL_STATUS_LSB      0
+
+/* ================================================================
+ * ---- Register XC_XCVR_CNTL_CNTL */
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_OFFSET    0x01c
+#ifndef SAND_HAL_XC_XCVR_CNTL_CNTL_NO_TEST_MASK
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_NO_TEST_MASK    0x000
+#endif
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_MASK    0xffffffff
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_MSB     31
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_LSB      0
+
+/* ================================================================
+ * ---- Register XC_XCVR_CNTL_BRD_INFO */
+#define SAND_HAL_XC_XCVR_CNTL_BRD_INFO_OFFSET    0x020
+#ifndef SAND_HAL_XC_XCVR_CNTL_BRD_INFO_NO_TEST_MASK
+#define SAND_HAL_XC_XCVR_CNTL_BRD_INFO_NO_TEST_MASK    0x000
+#endif
+#define SAND_HAL_XC_XCVR_CNTL_BRD_INFO_MASK    0xffffffff
+#define SAND_HAL_XC_XCVR_CNTL_BRD_INFO_MSB     31
+#define SAND_HAL_XC_XCVR_CNTL_BRD_INFO_LSB      0
+
+/* ================================================================
+ * ---- Register XC_XCVR_CNTL_MAC_FLOW_CTL */
+#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_OFFSET    0x024
+#ifndef SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_NO_TEST_MASK
+#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_NO_TEST_MASK    0x000
+#endif
+#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MASK    0xffffffff
+#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MSB     31
+#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_LSB      0
+
+/* ================================================================
+ * ---- Register XC_XCVR_CNTL_INTERRUPT */
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_OFFSET    0x00c
+#ifndef SAND_HAL_XC_XCVR_CNTL_INTERRUPT_NO_TEST_MASK
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_NO_TEST_MASK    0x000
+#endif
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK    0xffffffff
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MSB     31
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_LSB      0
+
+/* ================================================================
+ * ---- Register XC_XCVR_CNTL_INTERRUPT_MASK */
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_OFFSET    0x010
+#ifndef SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_NO_TEST_MASK
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_NO_TEST_MASK    0x000
+#endif
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MASK    0xffffffff
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MSB     31
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_LSB      0
+
+/* ================================================================
+ * ---- Register XC_XCVR_CNTL_SCRATCH */
+#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_OFFSET    0x014
+#ifndef SAND_HAL_XC_XCVR_CNTL_SCRATCH_NO_TEST_MASK
+#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_NO_TEST_MASK    0x000
+#endif
+#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_MASK    0xffffffff
+#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_MSB     31
+#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_LSB      0
+
+/* ================================================================
+ * ---- Register XC_XCVR_CNTL_SCRATCH_MASK */
+#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_MASK_OFFSET    0x018
+#ifndef SAND_HAL_XC_XCVR_CNTL_SCRATCH_MASK_NO_TEST_MASK
+#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_MASK_NO_TEST_MASK    0x000
+#endif
+#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_MASK_MASK    0xffffffff
+#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_MASK_MSB     31
+#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_MASK_LSB      0
+
+/* ================================================================
+ * Field info for register XC_XCVR_CNTL_REVISION */
+#define SAND_HAL_XC_XCVR_CNTL_REVISION_IDENTIFICATION_MASK    0x0000ff00
+#define SAND_HAL_XC_XCVR_CNTL_REVISION_IDENTIFICATION_SHIFT    8
+#define SAND_HAL_XC_XCVR_CNTL_REVISION_IDENTIFICATION_MSB    15
+#define SAND_HAL_XC_XCVR_CNTL_REVISION_IDENTIFICATION_LSB    8
+#define SAND_HAL_XC_XCVR_CNTL_REVISION_IDENTIFICATION_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_XC_XCVR_CNTL_REVISION_IDENTIFICATION_DEFAULT    0x00000000
+#define SAND_HAL_XC_XCVR_CNTL_REVISION_REVISION_MASK    0x000000ff
+#define SAND_HAL_XC_XCVR_CNTL_REVISION_REVISION_SHIFT    0
+#define SAND_HAL_XC_XCVR_CNTL_REVISION_REVISION_MSB    7
+#define SAND_HAL_XC_XCVR_CNTL_REVISION_REVISION_LSB    0
+#define SAND_HAL_XC_XCVR_CNTL_REVISION_REVISION_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_XC_XCVR_CNTL_REVISION_REVISION_DEFAULT    0x00000000
+
+/* ================================================================
+ * Field info for register XC_XCVR_CNTL_RESET */
+#define SAND_HAL_XC_XCVR_CNTL_RESET_MAC1_RESET_N_MASK    0x00020000
+#define SAND_HAL_XC_XCVR_CNTL_RESET_MAC1_RESET_N_SHIFT    17
+#define SAND_HAL_XC_XCVR_CNTL_RESET_MAC1_RESET_N_MSB    17
+#define SAND_HAL_XC_XCVR_CNTL_RESET_MAC1_RESET_N_LSB    17
+#define SAND_HAL_XC_XCVR_CNTL_RESET_MAC1_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_RESET_MAC1_RESET_N_DEFAULT    0x00000000
+#define SAND_HAL_XC_XCVR_CNTL_RESET_MAC0_RESET_N_MASK    0x00010000
+#define SAND_HAL_XC_XCVR_CNTL_RESET_MAC0_RESET_N_SHIFT    16
+#define SAND_HAL_XC_XCVR_CNTL_RESET_MAC0_RESET_N_MSB    16
+#define SAND_HAL_XC_XCVR_CNTL_RESET_MAC0_RESET_N_LSB    16
+#define SAND_HAL_XC_XCVR_CNTL_RESET_MAC0_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_RESET_MAC0_RESET_N_DEFAULT    0x00000000
+#define SAND_HAL_XC_XCVR_CNTL_RESET_SLAVE_RESET_N_MASK    0x00008000
+#define SAND_HAL_XC_XCVR_CNTL_RESET_SLAVE_RESET_N_SHIFT    15
+#define SAND_HAL_XC_XCVR_CNTL_RESET_SLAVE_RESET_N_MSB    15
+#define SAND_HAL_XC_XCVR_CNTL_RESET_SLAVE_RESET_N_LSB    15
+#define SAND_HAL_XC_XCVR_CNTL_RESET_SLAVE_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_RESET_SLAVE_RESET_N_DEFAULT    0x00000000
+#define SAND_HAL_XC_XCVR_CNTL_RESET_BME_RESET_N_MASK    0x00004000
+#define SAND_HAL_XC_XCVR_CNTL_RESET_BME_RESET_N_SHIFT    14
+#define SAND_HAL_XC_XCVR_CNTL_RESET_BME_RESET_N_MSB    14
+#define SAND_HAL_XC_XCVR_CNTL_RESET_BME_RESET_N_LSB    14
+#define SAND_HAL_XC_XCVR_CNTL_RESET_BME_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_RESET_BME_RESET_N_DEFAULT    0x00000000
+#define SAND_HAL_XC_XCVR_CNTL_RESET_ACE_RESET_N_MASK    0x00002000
+#define SAND_HAL_XC_XCVR_CNTL_RESET_ACE_RESET_N_SHIFT    13
+#define SAND_HAL_XC_XCVR_CNTL_RESET_ACE_RESET_N_MSB    13
+#define SAND_HAL_XC_XCVR_CNTL_RESET_ACE_RESET_N_LSB    13
+#define SAND_HAL_XC_XCVR_CNTL_RESET_ACE_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_RESET_ACE_RESET_N_DEFAULT    0x00000000
+#define SAND_HAL_XC_XCVR_CNTL_RESET_CF_RESET_N_MASK    0x00001000
+#define SAND_HAL_XC_XCVR_CNTL_RESET_CF_RESET_N_SHIFT    12
+#define SAND_HAL_XC_XCVR_CNTL_RESET_CF_RESET_N_MSB    12
+#define SAND_HAL_XC_XCVR_CNTL_RESET_CF_RESET_N_LSB    12
+#define SAND_HAL_XC_XCVR_CNTL_RESET_CF_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_RESET_CF_RESET_N_DEFAULT    0x00000000
+#define SAND_HAL_XC_XCVR_CNTL_RESET_QE_A_RESET_N_MASK    0x00000800
+#define SAND_HAL_XC_XCVR_CNTL_RESET_QE_A_RESET_N_SHIFT    11
+#define SAND_HAL_XC_XCVR_CNTL_RESET_QE_A_RESET_N_MSB    11
+#define SAND_HAL_XC_XCVR_CNTL_RESET_QE_A_RESET_N_LSB    11
+#define SAND_HAL_XC_XCVR_CNTL_RESET_QE_A_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_RESET_QE_A_RESET_N_DEFAULT    0x00000000
+#define SAND_HAL_XC_XCVR_CNTL_RESET_IFE_A_RESET_N_MASK    0x00000400
+#define SAND_HAL_XC_XCVR_CNTL_RESET_IFE_A_RESET_N_SHIFT    10
+#define SAND_HAL_XC_XCVR_CNTL_RESET_IFE_A_RESET_N_MSB    10
+#define SAND_HAL_XC_XCVR_CNTL_RESET_IFE_A_RESET_N_LSB    10
+#define SAND_HAL_XC_XCVR_CNTL_RESET_IFE_A_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_RESET_IFE_A_RESET_N_DEFAULT    0x00000000
+#define SAND_HAL_XC_XCVR_CNTL_RESET_EFE_A_RESET_N_MASK    0x00000200
+#define SAND_HAL_XC_XCVR_CNTL_RESET_EFE_A_RESET_N_SHIFT    9
+#define SAND_HAL_XC_XCVR_CNTL_RESET_EFE_A_RESET_N_MSB    9
+#define SAND_HAL_XC_XCVR_CNTL_RESET_EFE_A_RESET_N_LSB    9
+#define SAND_HAL_XC_XCVR_CNTL_RESET_EFE_A_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_RESET_EFE_A_RESET_N_DEFAULT    0x00000000
+#define SAND_HAL_XC_XCVR_CNTL_RESET_QE_B_RESET_N_MASK    0x00000100
+#define SAND_HAL_XC_XCVR_CNTL_RESET_QE_B_RESET_N_SHIFT    8
+#define SAND_HAL_XC_XCVR_CNTL_RESET_QE_B_RESET_N_MSB    8
+#define SAND_HAL_XC_XCVR_CNTL_RESET_QE_B_RESET_N_LSB    8
+#define SAND_HAL_XC_XCVR_CNTL_RESET_QE_B_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_RESET_QE_B_RESET_N_DEFAULT    0x00000000
+#define SAND_HAL_XC_XCVR_CNTL_RESET_IFE_B_RESET_N_MASK    0x00000080
+#define SAND_HAL_XC_XCVR_CNTL_RESET_IFE_B_RESET_N_SHIFT    7
+#define SAND_HAL_XC_XCVR_CNTL_RESET_IFE_B_RESET_N_MSB    7
+#define SAND_HAL_XC_XCVR_CNTL_RESET_IFE_B_RESET_N_LSB    7
+#define SAND_HAL_XC_XCVR_CNTL_RESET_IFE_B_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_RESET_IFE_B_RESET_N_DEFAULT    0x00000000
+#define SAND_HAL_XC_XCVR_CNTL_RESET_EFE_B_RESET_N_MASK    0x00000040
+#define SAND_HAL_XC_XCVR_CNTL_RESET_EFE_B_RESET_N_SHIFT    6
+#define SAND_HAL_XC_XCVR_CNTL_RESET_EFE_B_RESET_N_MSB    6
+#define SAND_HAL_XC_XCVR_CNTL_RESET_EFE_B_RESET_N_LSB    6
+#define SAND_HAL_XC_XCVR_CNTL_RESET_EFE_B_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_RESET_EFE_B_RESET_N_DEFAULT    0x00000000
+#define SAND_HAL_XC_XCVR_CNTL_RESET_LOCK1_RESET_N_MASK    0x00000020
+#define SAND_HAL_XC_XCVR_CNTL_RESET_LOCK1_RESET_N_SHIFT    5
+#define SAND_HAL_XC_XCVR_CNTL_RESET_LOCK1_RESET_N_MSB    5
+#define SAND_HAL_XC_XCVR_CNTL_RESET_LOCK1_RESET_N_LSB    5
+#define SAND_HAL_XC_XCVR_CNTL_RESET_LOCK1_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_RESET_LOCK1_RESET_N_DEFAULT    0x00000000
+#define SAND_HAL_XC_XCVR_CNTL_RESET_LOCK0_RESET_N_MASK    0x00000010
+#define SAND_HAL_XC_XCVR_CNTL_RESET_LOCK0_RESET_N_SHIFT    4
+#define SAND_HAL_XC_XCVR_CNTL_RESET_LOCK0_RESET_N_MSB    4
+#define SAND_HAL_XC_XCVR_CNTL_RESET_LOCK0_RESET_N_LSB    4
+#define SAND_HAL_XC_XCVR_CNTL_RESET_LOCK0_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_RESET_LOCK0_RESET_N_DEFAULT    0x00000000
+#define SAND_HAL_XC_XCVR_CNTL_RESET_I2C_MUX1_RESET_N_MASK    0x00000008
+#define SAND_HAL_XC_XCVR_CNTL_RESET_I2C_MUX1_RESET_N_SHIFT    3
+#define SAND_HAL_XC_XCVR_CNTL_RESET_I2C_MUX1_RESET_N_MSB    3
+#define SAND_HAL_XC_XCVR_CNTL_RESET_I2C_MUX1_RESET_N_LSB    3
+#define SAND_HAL_XC_XCVR_CNTL_RESET_I2C_MUX1_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_RESET_I2C_MUX1_RESET_N_DEFAULT    0x00000000
+#define SAND_HAL_XC_XCVR_CNTL_RESET_I2C_MUX0_RESET_N_MASK    0x00000004
+#define SAND_HAL_XC_XCVR_CNTL_RESET_I2C_MUX0_RESET_N_SHIFT    2
+#define SAND_HAL_XC_XCVR_CNTL_RESET_I2C_MUX0_RESET_N_MSB    2
+#define SAND_HAL_XC_XCVR_CNTL_RESET_I2C_MUX0_RESET_N_LSB    2
+#define SAND_HAL_XC_XCVR_CNTL_RESET_I2C_MUX0_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_RESET_I2C_MUX0_RESET_N_DEFAULT    0x00000000
+#define SAND_HAL_XC_XCVR_CNTL_RESET_PHY0_RESET_N_MASK    0x00000002
+#define SAND_HAL_XC_XCVR_CNTL_RESET_PHY0_RESET_N_SHIFT    1
+#define SAND_HAL_XC_XCVR_CNTL_RESET_PHY0_RESET_N_MSB    1
+#define SAND_HAL_XC_XCVR_CNTL_RESET_PHY0_RESET_N_LSB    1
+#define SAND_HAL_XC_XCVR_CNTL_RESET_PHY0_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_RESET_PHY0_RESET_N_DEFAULT    0x00000000
+#define SAND_HAL_XC_XCVR_CNTL_RESET_PHY1_RESET_N_MASK    0x00000001
+#define SAND_HAL_XC_XCVR_CNTL_RESET_PHY1_RESET_N_SHIFT    0
+#define SAND_HAL_XC_XCVR_CNTL_RESET_PHY1_RESET_N_MSB    0
+#define SAND_HAL_XC_XCVR_CNTL_RESET_PHY1_RESET_N_LSB    0
+#define SAND_HAL_XC_XCVR_CNTL_RESET_PHY1_RESET_N_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_RESET_PHY1_RESET_N_DEFAULT    0x00000000
+
+/* ================================================================
+ * Field info for register XC_XCVR_CNTL_STATUS */
+#define SAND_HAL_XC_XCVR_CNTL_STATUS_PS_A_PRES_N_MASK    0x00000004
+#define SAND_HAL_XC_XCVR_CNTL_STATUS_PS_A_PRES_N_SHIFT    2
+#define SAND_HAL_XC_XCVR_CNTL_STATUS_PS_A_PRES_N_MSB    2
+#define SAND_HAL_XC_XCVR_CNTL_STATUS_PS_A_PRES_N_LSB    2
+#define SAND_HAL_XC_XCVR_CNTL_STATUS_PS_A_PRES_N_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_XC_XCVR_CNTL_STATUS_PS_A_PRES_N_DEFAULT    0x00000000
+#define SAND_HAL_XC_XCVR_CNTL_STATUS_PS_B_PRES_N_MASK    0x00000002
+#define SAND_HAL_XC_XCVR_CNTL_STATUS_PS_B_PRES_N_SHIFT    1
+#define SAND_HAL_XC_XCVR_CNTL_STATUS_PS_B_PRES_N_MSB    1
+#define SAND_HAL_XC_XCVR_CNTL_STATUS_PS_B_PRES_N_LSB    1
+#define SAND_HAL_XC_XCVR_CNTL_STATUS_PS_B_PRES_N_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_XC_XCVR_CNTL_STATUS_PS_B_PRES_N_DEFAULT    0x00000000
+#define SAND_HAL_XC_XCVR_CNTL_STATUS_ALL_GOOD_MASK    0x00000001
+#define SAND_HAL_XC_XCVR_CNTL_STATUS_ALL_GOOD_SHIFT    0
+#define SAND_HAL_XC_XCVR_CNTL_STATUS_ALL_GOOD_MSB    0
+#define SAND_HAL_XC_XCVR_CNTL_STATUS_ALL_GOOD_LSB    0
+#define SAND_HAL_XC_XCVR_CNTL_STATUS_ALL_GOOD_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_XC_XCVR_CNTL_STATUS_ALL_GOOD_DEFAULT    0x00000000
+
+/* ================================================================
+ * Field info for register XC_XCVR_CNTL_CNTL */
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_SW_PWR_DOWN_MASK    0x00000400
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_SW_PWR_DOWN_SHIFT    10
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_SW_PWR_DOWN_MSB    10
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_SW_PWR_DOWN_LSB    10
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_SW_PWR_DOWN_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_SW_PWR_DOWN_DEFAULT    0x00000000
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_OVER_TEMP_LED_MASK    0x00000300
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_OVER_TEMP_LED_SHIFT    8
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_OVER_TEMP_LED_MSB    9
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_OVER_TEMP_LED_LSB    8
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_OVER_TEMP_LED_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_OVER_TEMP_LED_DEFAULT    0x00000000
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_ERROR_LED_MASK    0x000000c0
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_ERROR_LED_SHIFT    6
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_ERROR_LED_MSB    7
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_ERROR_LED_LSB    6
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_ERROR_LED_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_ERROR_LED_DEFAULT    0x00000000
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_RS232_R_LED_MASK    0x00000030
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_RS232_R_LED_SHIFT    4
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_RS232_R_LED_MSB    5
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_RS232_R_LED_LSB    4
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_RS232_R_LED_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_RS232_R_LED_DEFAULT    0x00000000
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_RS232_L_LED_MASK    0x0000000c
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_RS232_L_LED_SHIFT    2
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_RS232_L_LED_MSB    3
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_RS232_L_LED_LSB    2
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_RS232_L_LED_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_RS232_L_LED_DEFAULT    0x00000000
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_CORE_CLK_50_EN_MASK    0x00000002
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_CORE_CLK_50_EN_SHIFT    1
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_CORE_CLK_50_EN_MSB    1
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_CORE_CLK_50_EN_LSB    1
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_CORE_CLK_50_EN_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_CORE_CLK_50_EN_DEFAULT    0x00000001
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_PCI_CLK_EN_MASK    0x00000001
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_PCI_CLK_EN_SHIFT    0
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_PCI_CLK_EN_MSB    0
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_PCI_CLK_EN_LSB    0
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_PCI_CLK_EN_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_CNTL_PCI_CLK_EN_DEFAULT    0x00000001
+
+/* ================================================================
+ * Field info for register XC_XCVR_CNTL_BRD_INFO */
+#define SAND_HAL_XC_XCVR_CNTL_BRD_INFO_BRD_ID_MASK    0x000000f0
+#define SAND_HAL_XC_XCVR_CNTL_BRD_INFO_BRD_ID_SHIFT    4
+#define SAND_HAL_XC_XCVR_CNTL_BRD_INFO_BRD_ID_MSB    7
+#define SAND_HAL_XC_XCVR_CNTL_BRD_INFO_BRD_ID_LSB    4
+#define SAND_HAL_XC_XCVR_CNTL_BRD_INFO_BRD_ID_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_XC_XCVR_CNTL_BRD_INFO_BRD_ID_DEFAULT    0x00000000
+#define SAND_HAL_XC_XCVR_CNTL_BRD_INFO_BRD_REV_MASK    0x00000003
+#define SAND_HAL_XC_XCVR_CNTL_BRD_INFO_BRD_REV_SHIFT    0
+#define SAND_HAL_XC_XCVR_CNTL_BRD_INFO_BRD_REV_MSB    1
+#define SAND_HAL_XC_XCVR_CNTL_BRD_INFO_BRD_REV_LSB    0
+#define SAND_HAL_XC_XCVR_CNTL_BRD_INFO_BRD_REV_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_XC_XCVR_CNTL_BRD_INFO_BRD_REV_DEFAULT    0x00000000
+
+/* ================================================================
+ * Field info for register XC_XCVR_CNTL_MAC_FLOW_CTL */
+#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACB_TXPAUSE_FR_MASK    0x00001000
+#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACB_TXPAUSE_FR_SHIFT    12
+#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACB_TXPAUSE_FR_MSB    12
+#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACB_TXPAUSE_FR_LSB    12
+#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACB_TXPAUSE_FR_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACB_TXPAUSE_FR_DEFAULT    0x00000000
+#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACB_TXPAUSE_ADDR_MASK    0x00000f00
+#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACB_TXPAUSE_ADDR_SHIFT    8
+#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACB_TXPAUSE_ADDR_MSB    11
+#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACB_TXPAUSE_ADDR_LSB    8
+#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACB_TXPAUSE_ADDR_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACB_TXPAUSE_ADDR_DEFAULT    0x00000000
+#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACA_TXPAUSE_FR_MASK    0x00000010
+#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACA_TXPAUSE_FR_SHIFT    4
+#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACA_TXPAUSE_FR_MSB    4
+#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACA_TXPAUSE_FR_LSB    4
+#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACA_TXPAUSE_FR_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACA_TXPAUSE_FR_DEFAULT    0x00000000
+#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACA_TXPAUSE_ADDR_MASK    0x0000000f
+#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACA_TXPAUSE_ADDR_SHIFT    0
+#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACA_TXPAUSE_ADDR_MSB    3
+#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACA_TXPAUSE_ADDR_LSB    0
+#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACA_TXPAUSE_ADDR_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACA_TXPAUSE_ADDR_DEFAULT    0x00000000
+
+/* ================================================================
+ * Field info for register XC_XCVR_CNTL_INTERRUPT */
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_BME_TIMEOUT_MASK    0x00002000
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_BME_TIMEOUT_SHIFT    13
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_BME_TIMEOUT_MSB    13
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_BME_TIMEOUT_LSB    13
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_BME_TIMEOUT_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_BME_TIMEOUT_DEFAULT    0x00000000
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC_TIMEOUT_MASK    0x00001000
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC_TIMEOUT_SHIFT    12
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC_TIMEOUT_MSB    12
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC_TIMEOUT_LSB    12
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC_TIMEOUT_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC_TIMEOUT_DEFAULT    0x00000000
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_QK_A_LOSOUT_N_MASK    0x00000800
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_QK_A_LOSOUT_N_SHIFT    11
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_QK_A_LOSOUT_N_MSB    11
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_QK_A_LOSOUT_N_LSB    11
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_QK_A_LOSOUT_N_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_QK_A_LOSOUT_N_DEFAULT    0x00000000
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_QK_B_LOSOUT_N_MASK    0x00000400
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_QK_B_LOSOUT_N_SHIFT    10
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_QK_B_LOSOUT_N_MSB    10
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_QK_B_LOSOUT_N_LSB    10
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_QK_B_LOSOUT_N_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_QK_B_LOSOUT_N_DEFAULT    0x00000000
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_A_NR_MASK    0x00000200
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_A_NR_SHIFT    9
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_A_NR_MSB    9
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_A_NR_LSB    9
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_A_NR_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_A_NR_DEFAULT    0x00000000
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_B_NR_MASK    0x00000100
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_B_NR_SHIFT    8
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_B_NR_MSB    8
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_B_NR_LSB    8
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_B_NR_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_B_NR_DEFAULT    0x00000000
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_A_INT_N_MASK    0x00000080
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_A_INT_N_SHIFT    7
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_A_INT_N_MSB    7
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_A_INT_N_LSB    7
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_A_INT_N_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_A_INT_N_DEFAULT    0x00000000
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_B_INT_N_MASK    0x00000040
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_B_INT_N_SHIFT    6
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_B_INT_N_MSB    6
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_B_INT_N_LSB    6
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_B_INT_N_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_B_INT_N_DEFAULT    0x00000000
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_OVER_TEMP_A_MASK    0x00000020
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_OVER_TEMP_A_SHIFT    5
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_OVER_TEMP_A_MSB    5
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_OVER_TEMP_A_LSB    5
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_OVER_TEMP_A_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_OVER_TEMP_A_DEFAULT    0x00000000
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_OVER_TEMP_B_MASK    0x00000010
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_OVER_TEMP_B_SHIFT    4
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_OVER_TEMP_B_MSB    4
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_OVER_TEMP_B_LSB    4
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_OVER_TEMP_B_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_OVER_TEMP_B_DEFAULT    0x00000000
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_POWER_FAIL_A_MASK    0x00000008
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_POWER_FAIL_A_SHIFT    3
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_POWER_FAIL_A_MSB    3
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_POWER_FAIL_A_LSB    3
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_POWER_FAIL_A_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_POWER_FAIL_A_DEFAULT    0x00000000
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_POWER_FAIL_B_MASK    0x00000004
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_POWER_FAIL_B_SHIFT    2
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_POWER_FAIL_B_MSB    2
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_POWER_FAIL_B_LSB    2
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_POWER_FAIL_B_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_POWER_FAIL_B_DEFAULT    0x00000000
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC1_INT_N_MASK    0x00000002
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC1_INT_N_SHIFT    1
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC1_INT_N_MSB    1
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC1_INT_N_LSB    1
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC1_INT_N_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC1_INT_N_DEFAULT    0x00000000
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC0_INT_N_MASK    0x00000001
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC0_INT_N_SHIFT    0
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC0_INT_N_MSB    0
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC0_INT_N_LSB    0
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC0_INT_N_TYPE (SAND_HAL_TYPE_READ)
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC0_INT_N_DEFAULT    0x00000000
+
+/* ================================================================
+ * Field info for register XC_XCVR_CNTL_INTERRUPT_MASK */
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_BME_TIMEOUT_DISINT_MASK    0x00002000
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_BME_TIMEOUT_DISINT_SHIFT    13
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_BME_TIMEOUT_DISINT_MSB    13
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_BME_TIMEOUT_DISINT_LSB    13
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_BME_TIMEOUT_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_BME_TIMEOUT_DISINT_DEFAULT    0x00000001
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC_TIMEOUT_DISINT_MASK    0x00001000
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC_TIMEOUT_DISINT_SHIFT    12
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC_TIMEOUT_DISINT_MSB    12
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC_TIMEOUT_DISINT_LSB    12
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC_TIMEOUT_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC_TIMEOUT_DISINT_DEFAULT    0x00000001
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_QK_A_LOSOUT_N_DISINT_MASK    0x00000800
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_QK_A_LOSOUT_N_DISINT_SHIFT    11
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_QK_A_LOSOUT_N_DISINT_MSB    11
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_QK_A_LOSOUT_N_DISINT_LSB    11
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_QK_A_LOSOUT_N_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_QK_A_LOSOUT_N_DISINT_DEFAULT    0x00000001
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_QK_B_LOSOUT_N_DISINT_MASK    0x00000400
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_QK_B_LOSOUT_N_DISINT_SHIFT    10
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_QK_B_LOSOUT_N_DISINT_MSB    10
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_QK_B_LOSOUT_N_DISINT_LSB    10
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_QK_B_LOSOUT_N_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_QK_B_LOSOUT_N_DISINT_DEFAULT    0x00000001
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_A_NR_DISINT_MASK    0x00000200
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_A_NR_DISINT_SHIFT    9
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_A_NR_DISINT_MSB    9
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_A_NR_DISINT_LSB    9
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_A_NR_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_A_NR_DISINT_DEFAULT    0x00000001
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_B_NR_DISINT_MASK    0x00000100
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_B_NR_DISINT_SHIFT    8
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_B_NR_DISINT_MSB    8
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_B_NR_DISINT_LSB    8
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_B_NR_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_B_NR_DISINT_DEFAULT    0x00000001
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_A_INT_N_DISINT_MASK    0x00000080
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_A_INT_N_DISINT_SHIFT    7
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_A_INT_N_DISINT_MSB    7
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_A_INT_N_DISINT_LSB    7
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_A_INT_N_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_A_INT_N_DISINT_DEFAULT    0x00000001
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_B_INT_N_DISINT_MASK    0x00000040
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_B_INT_N_DISINT_SHIFT    6
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_B_INT_N_DISINT_MSB    6
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_B_INT_N_DISINT_LSB    6
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_B_INT_N_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_B_INT_N_DISINT_DEFAULT    0x00000001
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_OVER_TEMP_A_DISINT_MASK    0x00000020
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_OVER_TEMP_A_DISINT_SHIFT    5
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_OVER_TEMP_A_DISINT_MSB    5
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_OVER_TEMP_A_DISINT_LSB    5
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_OVER_TEMP_A_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_OVER_TEMP_A_DISINT_DEFAULT    0x00000001
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_OVER_TEMP_B_DISINT_MASK    0x00000010
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_OVER_TEMP_B_DISINT_SHIFT    4
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_OVER_TEMP_B_DISINT_MSB    4
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_OVER_TEMP_B_DISINT_LSB    4
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_OVER_TEMP_B_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_OVER_TEMP_B_DISINT_DEFAULT    0x00000001
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_POWER_FAIL_A_DISINT_MASK    0x00000008
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_POWER_FAIL_A_DISINT_SHIFT    3
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_POWER_FAIL_A_DISINT_MSB    3
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_POWER_FAIL_A_DISINT_LSB    3
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_POWER_FAIL_A_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_POWER_FAIL_A_DISINT_DEFAULT    0x00000001
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_POWER_FAIL_B_DISINT_MASK    0x00000004
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_POWER_FAIL_B_DISINT_SHIFT    2
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_POWER_FAIL_B_DISINT_MSB    2
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_POWER_FAIL_B_DISINT_LSB    2
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_POWER_FAIL_B_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_POWER_FAIL_B_DISINT_DEFAULT    0x00000001
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC1_INT_N_DISINT_MASK    0x00000002
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC1_INT_N_DISINT_SHIFT    1
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC1_INT_N_DISINT_MSB    1
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC1_INT_N_DISINT_LSB    1
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC1_INT_N_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC1_INT_N_DISINT_DEFAULT    0x00000001
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC0_INT_N_DISINT_MASK    0x00000001
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC0_INT_N_DISINT_SHIFT    0
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC0_INT_N_DISINT_MSB    0
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC0_INT_N_DISINT_LSB    0
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC0_INT_N_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC0_INT_N_DISINT_DEFAULT    0x00000001
+
+/* ================================================================
+ * Field info for register XC_XCVR_CNTL_SCRATCH */
+#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_TEST_BITS_MASK    0xffffffff
+#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_TEST_BITS_SHIFT    0
+#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_TEST_BITS_MSB    31
+#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_TEST_BITS_LSB    0
+#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_TEST_BITS_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_TEST_BITS_DEFAULT    0x00000000
+
+/* ================================================================
+ * Field info for register XC_XCVR_CNTL_SCRATCH_MASK */
+#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_MASK_TEST_BITS_DISINT_MASK    0xffffffff
+#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_MASK_TEST_BITS_DISINT_SHIFT    0
+#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_MASK_TEST_BITS_DISINT_MSB    31
+#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_MASK_TEST_BITS_DISINT_LSB    0
+#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_MASK_TEST_BITS_DISINT_TYPE (SAND_HAL_TYPE_WRITE)
+#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_MASK_TEST_BITS_DISINT_DEFAULT    0xffffffff
+
+#endif /* matches #ifndef HAL_XC_AUTO_H */
diff --git a/board/sandburst/metrobox/init.S b/board/sandburst/metrobox/init.S
new file mode 100644
index 0000000..e398f00
--- /dev/null
+++ b/board/sandburst/metrobox/init.S
@@ -0,0 +1,99 @@
+/*
+*  Copyright (C) 2005
+*  Travis B. Sawyer, Sandburst Corporation, tsawyer@sandburst.com
+*
+* See file CREDITS for list of people who contributed to this
+* project.
+*
+* This program is free software; you can redistribute it and/or
+* modify it under the terms of the GNU General Public License as
+* published by the Free Software Foundation; either version 2 of
+* the License, or (at your option) any later version.
+*
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with this program; if not, write to the Free Software
+* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+* MA 02111-1307 USA
+*/
+
+#include <ppc_asm.tmpl>
+#include <config.h>
+
+/* General */
+#define TLB_VALID   0x00000200
+
+/* Supported page sizes */
+
+#define SZ_1K	    0x00000000
+#define SZ_4K	    0x00000010
+#define SZ_16K	    0x00000020
+#define SZ_64K	    0x00000030
+#define SZ_256K	    0x00000040
+#define SZ_1M	    0x00000050
+#define SZ_16M	    0x00000070
+#define SZ_256M	    0x00000090
+
+/* Storage attributes */
+#define SA_W	    0x00000800	    /* Write-through */
+#define SA_I	    0x00000400	    /* Caching inhibited */
+#define SA_M	    0x00000200	    /* Memory coherence */
+#define SA_G	    0x00000100	    /* Guarded */
+#define SA_E	    0x00000080	    /* Endian */
+
+/* Access control */
+#define AC_X	    0x00000024	    /* Execute */
+#define AC_W	    0x00000012	    /* Write */
+#define AC_R	    0x00000009	    /* Read */
+
+/* Some handy macros */
+
+#define EPN(e)		((e) & 0xfffffc00)
+#define TLB0(epn,sz)	( (EPN((epn)) | (sz) | TLB_VALID ) )
+#define TLB1(rpn,erpn)	( ((rpn)&0xfffffc00) | (erpn) )
+#define TLB2(a)		( (a)&0x00000fbf )
+
+#define tlbtab_start\
+	mflr    r1  ;\
+	bl 0f	    ;
+
+#define tlbtab_end\
+	.long 0, 0, 0	;   \
+0:	mflr    r0	;   \
+	mtlr    r1	;   \
+	blr		;
+
+#define tlbentry(epn,sz,rpn,erpn,attr)\
+	.long TLB0(epn,sz),TLB1(rpn,erpn),TLB2(attr)
+
+
+/**************************************************************************
+ * TLB TABLE
+ *
+ * This table is used by the cpu boot code to setup the initial tlb
+ * entries. Rather than make broad assumptions in the cpu source tree,
+ * this table lets each board set things up however they like.
+ *
+ *  Pointer to the table is returned in r1
+ *
+ *************************************************************************/
+
+	.section .bootpg,"ax"
+	.globl tlbtab
+
+tlbtab:
+	tlbtab_start
+	tlbentry( 0xf0000000, SZ_256M, 0xf0000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I)
+	tlbentry( CFG_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_R|AC_W|SA_G|SA_I)
+	tlbentry( CFG_ISRAM_BASE, SZ_256K, 0x80000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I)
+	tlbentry( CFG_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
+	tlbentry( CFG_SDRAM_BASE+0x10000000, SZ_256M, 0x10000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
+	tlbentry( CFG_SDRAM_BASE+0x20000000, SZ_256M, 0x20000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
+	tlbentry( CFG_SDRAM_BASE+0x30000000, SZ_256M, 0x30000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
+	tlbentry( CFG_PCI_BASE, SZ_256M, 0x00000000, 2, AC_R|AC_W|SA_G|SA_I )
+	tlbentry( CFG_PCI_MEMBASE, SZ_256M, 0x00000000, 3, AC_R|AC_W|SA_G|SA_I )
+	tlbtab_end
diff --git a/board/sandburst/metrobox/metrobox.c b/board/sandburst/metrobox/metrobox.c
new file mode 100644
index 0000000..2f65d8f
--- /dev/null
+++ b/board/sandburst/metrobox/metrobox.c
@@ -0,0 +1,570 @@
+/*
+ *  Copyright (c) 2005
+ *  Travis B. Sawyer,  Sandburst Corporation, tsawyer@sandburst.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <config.h>
+#include <common.h>
+#include <command.h>
+#include "metrobox.h"
+#include "metrobox_version.h"
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <spd_sdram.h>
+#include <i2c.h>
+#include "../common/ppc440gx_i2c.h"
+#include "../common/sb_common.h"
+
+
+
+void fpga_init (void);
+
+METROBOX_BOARD_ID_ST board_id_as[] =
+{	{"Undefined"},			    /* Not specified */
+	{"2x10Gb"},			    /* 2 ports, 10 GbE */
+	{"20x1Gb"},			    /* 20 ports, 1 GbE */
+	{"Reserved"},			     /* Reserved for future use */
+};
+
+
+/*************************************************************************
+ *  board_early_init_f
+ *
+ *  Setup chip selects, initialize the Opto-FPGA, initialize
+ *  interrupt polarity and triggers.
+ *
+ ************************************************************************/
+int board_early_init_f (void)
+{
+	ppc440_gpio_regs_t *gpio_regs;
+
+	/* Enable GPIO interrupts */
+	mtsdr(sdr_pfc0, 0x00103E00);
+
+	/* Setup access for LEDs, and system topology info */
+	gpio_regs = (ppc440_gpio_regs_t *)CFG_GPIO_BASE;
+	gpio_regs->open_drain = SBCOMMON_GPIO_SYS_LEDS;
+	gpio_regs->tri_state  = SBCOMMON_GPIO_DBGLEDS;
+
+	/* Turn on all the leds for now */
+	gpio_regs->out = SBCOMMON_GPIO_LEDS;
+
+	/*--------------------------------------------------------------------+
+	  | Initialize EBC CONFIG
+	  +-------------------------------------------------------------------*/
+	mtebc(xbcfg,
+	      EBC_CFG_LE_UNLOCK	   | EBC_CFG_PTD_ENABLE |
+	      EBC_CFG_RTC_64PERCLK | EBC_CFG_ATC_PREVIOUS |
+	      EBC_CFG_DTC_PREVIOUS | EBC_CFG_CTC_PREVIOUS |
+	      EBC_CFG_EMC_DEFAULT  | EBC_CFG_PME_DISABLE |
+	      EBC_CFG_PR_32);
+
+	/*--------------------------------------------------------------------+
+	  | 1/2 MB FLASH. Initialize bank 0 with default values.
+	  +-------------------------------------------------------------------*/
+	mtebc(pb0ap,
+	      EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(8) |
+	      EBC_BXAP_BCE_DISABLE  | EBC_BXAP_CSN_ENCODE(1) |
+	      EBC_BXAP_OEN_ENCODE(1)| EBC_BXAP_WBN_ENCODE(1) |
+	      EBC_BXAP_WBF_ENCODE(1)| EBC_BXAP_TH_ENCODE(1) |
+	      EBC_BXAP_RE_DISABLED  | EBC_BXAP_BEM_WRITEONLY |
+	      EBC_BXAP_PEN_DISABLED);
+
+	mtebc(pb0cr, EBC_BXCR_BAS_ENCODE(CFG_FLASH_BASE) |
+	      EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_8BIT);
+	/*--------------------------------------------------------------------+
+	  | 8KB NVRAM/RTC. Initialize bank 1 with default values.
+	  +-------------------------------------------------------------------*/
+	mtebc(pb1ap,
+	      EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(10) |
+	      EBC_BXAP_BCE_DISABLE  | EBC_BXAP_CSN_ENCODE(1) |
+	      EBC_BXAP_OEN_ENCODE(1)| EBC_BXAP_WBN_ENCODE(1) |
+	      EBC_BXAP_WBF_ENCODE(1)| EBC_BXAP_TH_ENCODE(1) |
+	      EBC_BXAP_RE_DISABLED  | EBC_BXAP_BEM_WRITEONLY |
+	      EBC_BXAP_PEN_DISABLED);
+
+	mtebc(pb1cr, EBC_BXCR_BAS_ENCODE(0x48000000) |
+	      EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_8BIT);
+
+	/*--------------------------------------------------------------------+
+	  | Compact Flash, uses 2 Chip Selects (2 & 6)
+	  +-------------------------------------------------------------------*/
+	mtebc(pb2ap,
+	      EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(8) |
+	      EBC_BXAP_BCE_DISABLE  | EBC_BXAP_CSN_ENCODE(1) |
+	      EBC_BXAP_OEN_ENCODE(1)| EBC_BXAP_WBN_ENCODE(1) |
+	      EBC_BXAP_WBF_ENCODE(0)| EBC_BXAP_TH_ENCODE(1) |
+	      EBC_BXAP_RE_DISABLED  | EBC_BXAP_BEM_WRITEONLY |
+	      EBC_BXAP_PEN_DISABLED);
+
+	mtebc(pb2cr, EBC_BXCR_BAS_ENCODE(0xF0000000) |
+	      EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_16BIT);
+
+	/*--------------------------------------------------------------------+
+	  | OPTO & OFEM FPGA. Initialize bank 3 with default values.
+	  +-------------------------------------------------------------------*/
+	mtebc(pb3ap,
+	      EBC_BXAP_RE_ENABLED    | EBC_BXAP_SOR_NONDELAYED |
+	      EBC_BXAP_BME_DISABLED  | EBC_BXAP_TWT_ENCODE(3) |
+	      EBC_BXAP_TH_ENCODE(1)  | EBC_BXAP_WBF_ENCODE(0) |
+	      EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_PEN_DISABLED |
+	      EBC_BXAP_OEN_ENCODE(1) | EBC_BXAP_BEM_RW);
+
+	mtebc(pb3cr, EBC_BXCR_BAS_ENCODE(0x48200000) |
+	      EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_32BIT);
+
+	/*--------------------------------------------------------------------+
+	  | MAC A for metrobox
+	  | MAC A & B for Kamino.  OFEM FPGA decodes the addresses
+	  | Initialize bank 4 with default values.
+	  +-------------------------------------------------------------------*/
+	mtebc(pb4ap,
+	      EBC_BXAP_RE_ENABLED    | EBC_BXAP_SOR_NONDELAYED |
+	      EBC_BXAP_BME_DISABLED  | EBC_BXAP_TWT_ENCODE(3) |
+	      EBC_BXAP_TH_ENCODE(1)  | EBC_BXAP_WBF_ENCODE(0) |
+	      EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_PEN_DISABLED |
+	      EBC_BXAP_OEN_ENCODE(1) | EBC_BXAP_BEM_RW);
+
+	mtebc(pb4cr, EBC_BXCR_BAS_ENCODE(0x48600000) |
+	      EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_32BIT);
+
+	/*--------------------------------------------------------------------+
+	  | Metrobox MAC B  Initialize bank 5 with default values.
+	  | KA REF FPGA	 Initialize bank 5 with default values.
+	  +-------------------------------------------------------------------*/
+	mtebc(pb5ap,
+	      EBC_BXAP_RE_ENABLED    | EBC_BXAP_SOR_NONDELAYED |
+	      EBC_BXAP_BME_DISABLED  | EBC_BXAP_TWT_ENCODE(3) |
+	      EBC_BXAP_TH_ENCODE(1)  | EBC_BXAP_WBF_ENCODE(0) |
+	      EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_PEN_DISABLED |
+	      EBC_BXAP_OEN_ENCODE(1) | EBC_BXAP_BEM_RW);
+
+	mtebc(pb5cr, EBC_BXCR_BAS_ENCODE(0x48700000) |
+	      EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_32BIT);
+
+	/*--------------------------------------------------------------------+
+	  | Compact Flash, uses 2 Chip Selects (2 & 6)
+	  +-------------------------------------------------------------------*/
+	mtebc(pb6ap,
+	      EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(8) |
+	      EBC_BXAP_BCE_DISABLE  | EBC_BXAP_CSN_ENCODE(1) |
+	      EBC_BXAP_OEN_ENCODE(1)| EBC_BXAP_WBN_ENCODE(1) |
+	      EBC_BXAP_WBF_ENCODE(0)| EBC_BXAP_TH_ENCODE(1) |
+	      EBC_BXAP_RE_DISABLED  | EBC_BXAP_BEM_WRITEONLY |
+	      EBC_BXAP_PEN_DISABLED);
+
+	mtebc(pb6cr, EBC_BXCR_BAS_ENCODE(0xF0100000) |
+	      EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_16BIT);
+
+	/*--------------------------------------------------------------------+
+	  | BME-32. Initialize bank 7 with default values.
+	  +-------------------------------------------------------------------*/
+	mtebc(pb7ap,
+	      EBC_BXAP_RE_ENABLED    | EBC_BXAP_SOR_NONDELAYED |
+	      EBC_BXAP_BME_DISABLED  | EBC_BXAP_TWT_ENCODE(3) |
+	      EBC_BXAP_TH_ENCODE(1)  | EBC_BXAP_WBF_ENCODE(0) |
+	      EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_PEN_DISABLED |
+	      EBC_BXAP_OEN_ENCODE(1) | EBC_BXAP_BEM_RW);
+
+	mtebc(pb7cr, EBC_BXCR_BAS_ENCODE(0x48500000) |
+	      EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_32BIT);
+
+
+	/*--------------------------------------------------------------------+
+	 * Setup the interrupt controller polarities, triggers, etc.
+	 +-------------------------------------------------------------------*/
+	mtdcr (uic0sr, 0xffffffff);	/* clear all */
+	mtdcr (uic0er, 0x00000000);	/* disable all */
+	mtdcr (uic0cr, 0x00000000);	/* all non- critical */
+	mtdcr (uic0pr, 0xfffffe03);	/* polarity */
+	mtdcr (uic0tr, 0x01c00000);	/* trigger edge vs level */
+	mtdcr (uic0vr, 0x00000001);	/* int31 highest, base=0x000 */
+	mtdcr (uic0sr, 0xffffffff);	/* clear all */
+
+	mtdcr (uic1sr, 0xffffffff);	/* clear all */
+	mtdcr (uic1er, 0x00000000);	/* disable all */
+	mtdcr (uic1cr, 0x00000000);	/* all non-critical */
+	mtdcr (uic1pr, 0xffffc8ff);	/* polarity */
+	mtdcr (uic1tr, 0x00ff0000);	/* trigger edge vs level */
+	mtdcr (uic1vr, 0x00000001);	/* int31 highest, base=0x000 */
+	mtdcr (uic1sr, 0xffffffff);	/* clear all */
+
+	mtdcr (uic2sr, 0xffffffff);	/* clear all */
+	mtdcr (uic2er, 0x00000000);	/* disable all */
+	mtdcr (uic2cr, 0x00000000);	/* all non-critical */
+	mtdcr (uic2pr, 0xffff83ff);	/* polarity */
+	mtdcr (uic2tr, 0x00ff8c0f);	/* trigger edge vs level */
+	mtdcr (uic2vr, 0x00000001);	/* int31 highest, base=0x000 */
+	mtdcr (uic2sr, 0xffffffff);	/* clear all */
+
+	mtdcr (uicb0sr, 0xfc000000);	/* clear all */
+	mtdcr (uicb0er, 0x00000000);	/* disable all */
+	mtdcr (uicb0cr, 0x00000000);	/* all non-critical */
+	mtdcr (uicb0pr, 0xfc000000);
+	mtdcr (uicb0tr, 0x00000000);
+	mtdcr (uicb0vr, 0x00000001);
+
+	fpga_init();
+
+	return 0;
+}
+
+
+/*************************************************************************
+ *  checkboard
+ *
+ *  Dump pertinent info to the console
+ *
+ ************************************************************************/
+int checkboard (void)
+{
+	sys_info_t sysinfo;
+	unsigned char brd_rev, brd_id;
+	unsigned short sernum;
+	unsigned char opto_rev, opto_id;
+	OPTO_FPGA_REGS_ST *opto_ps;
+
+	opto_ps = (OPTO_FPGA_REGS_ST *)CFG_FPGA_BASE;
+
+	opto_rev = (unsigned char)((opto_ps->revision_ul &
+				    SAND_HAL_XC_XCVR_CNTL_REVISION_REVISION_MASK)
+				   >> SAND_HAL_XC_XCVR_CNTL_REVISION_REVISION_SHIFT);
+
+	opto_id = (unsigned char)((opto_ps->revision_ul &
+				   SAND_HAL_XC_XCVR_CNTL_REVISION_IDENTIFICATION_MASK)
+				  >> SAND_HAL_XC_XCVR_CNTL_REVISION_IDENTIFICATION_SHIFT);
+
+	brd_rev = (unsigned char)((opto_ps->boardinfo_ul &
+				   SAND_HAL_XC_XCVR_CNTL_BRD_INFO_BRD_REV_MASK)
+				  >> SAND_HAL_XC_XCVR_CNTL_BRD_INFO_BRD_REV_SHIFT);
+
+	brd_id = (unsigned char)((opto_ps->boardinfo_ul &
+				  SAND_HAL_XC_XCVR_CNTL_BRD_INFO_BRD_ID_MASK)
+				 >> SAND_HAL_XC_XCVR_CNTL_BRD_INFO_BRD_ID_SHIFT);
+
+	get_sys_info (&sysinfo);
+
+	sernum = sbcommon_get_serial_number();
+	printf ("Board: Sandburst Corporation MetroBox Serial Number: %d\n", sernum);
+	printf ("%s\n", METROBOX_U_BOOT_REL_STR);
+
+	printf ("Built %s %s by %s\n", __DATE__, __TIME__, BUILDUSER);
+	if (sbcommon_get_master()) {
+		printf("Slot 0 - Master\nSlave board");
+		if (sbcommon_secondary_present())
+			printf(" present\n");
+		else
+			printf(" not detected\n");
+	} else {
+		printf("Slot 1 - Slave\n\n");
+	}
+
+	printf ("OptoFPGA ID:\t0x%02X\tRev:  0x%02X\n", opto_id, opto_rev);
+	printf ("Board Rev:\t0x%02X\tID:  %s\n", brd_rev, board_id_as[brd_id]);
+
+	printf ("\tVCO: %lu MHz\n", sysinfo.freqVCOMhz / 1000000);
+	printf ("\tCPU: %lu MHz\n", sysinfo.freqProcessor / 1000000);
+	printf ("\tPLB: %lu MHz\n", sysinfo.freqPLB / 1000000);
+	printf ("\tOPB: %lu MHz\n", sysinfo.freqOPB / 1000000);
+	printf ("\tEPB: %lu MHz\n", sysinfo.freqEPB / 1000000);
+
+
+	/* Fix the ack in the bme 32 */
+	udelay(5000);
+	out32(CFG_BME32_BASE + 0x0000000C, 0x00000001);
+	asm("eieio");
+
+
+	return (0);
+}
+
+
+/*************************************************************************
+ *  misc_init_f
+ *
+ *  Initialize I2C bus one to gain access to the fans
+ *
+ ************************************************************************/
+int misc_init_f (void)
+{
+	/* Turn on i2c bus 1 */
+	puts ("I2C1:  ");
+	i2c1_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+	puts ("ready\n");
+
+	/* Turn on fans */
+	sbcommon_fans();
+
+	return (0);
+}
+/*************************************************************************
+ *  misc_init_r
+ *
+ *  Do nothing.
+ *
+ ************************************************************************/
+int misc_init_r (void)
+{
+	unsigned short sernum;
+	char envstr[255];
+	unsigned char opto_rev;
+	OPTO_FPGA_REGS_ST *opto_ps;
+
+	opto_ps = (OPTO_FPGA_REGS_ST *)CFG_FPGA_BASE;
+
+	if(NULL != getenv("secondserial")) {
+	    puts("secondserial is set, switching to second serial port\n");
+	    setenv("stderr", "serial1");
+	    setenv("stdout", "serial1");
+	    setenv("stdin", "serial1");
+	}
+
+	setenv("ubrelver", METROBOX_U_BOOT_REL_STR);
+
+	memset(envstr, 0, 255);
+	sprintf (envstr, "Built %s %s by %s", __DATE__, __TIME__, BUILDUSER);
+	setenv("bldstr", envstr);
+	saveenv();
+
+	if( getenv("autorecover")) {
+		setenv("autorecover", NULL);
+		saveenv();
+		sernum = sbcommon_get_serial_number();
+
+		printf("\nSetting up environment for automatic filesystem recovery\n");
+		/*
+		 * Setup default bootargs
+		 */
+		memset(envstr, 0, 255);
+		sprintf(envstr, "console=ttyS0,9600 root=/dev/ram0 "
+			"rw ip=10.100.60.%d:::255.255.0.0:metrobox%d:eth0:none idebus=33",
+			sernum, sernum);
+		setenv("bootargs", envstr);
+
+		/*
+		 * Setup Default boot command
+		 */
+		setenv("bootcmd", "fatload ide 0 8000000 pimage.metrobox;"
+		       "fatload ide 0 8100000 pramdisk;"
+		       "bootm 8000000 8100000");
+
+		printf("Done.  Please type allow the system to continue to boot\n");
+	}
+
+	if( getenv("fakeled")) {
+		setenv("bootdelay", "-1");
+		saveenv();
+		printf("fakeled is set. use 'setenv fakeled ; setenv bootdelay 5 ; saveenv' to recover\n");
+		opto_rev = (unsigned char)((opto_ps->revision_ul &
+					    SAND_HAL_XC_XCVR_CNTL_REVISION_REVISION_MASK)
+					   >> SAND_HAL_XC_XCVR_CNTL_REVISION_REVISION_SHIFT);
+
+		if(0x12 <= opto_rev) {
+			opto_ps->control_ul &= ~ SAND_HAL_XC_XCVR_CNTL_CNTL_ERROR_LED_MASK;
+		}
+	}
+
+	return (0);
+}
+
+
+
+/*************************************************************************
+ *  ide_set_reset
+ *
+ *
+ *
+ ************************************************************************/
+#ifdef CONFIG_IDE_RESET
+void ide_set_reset(int on)
+{
+	OPTO_FPGA_REGS_ST *opto_ps;
+	opto_ps = (OPTO_FPGA_REGS_ST *)CFG_FPGA_BASE;
+
+	if (on) {		/* assert RESET */
+	    opto_ps->reset_ul &= ~SAND_HAL_XC_XCVR_CNTL_RESET_CF_RESET_N_MASK;
+	} else {		/* release RESET */
+	    opto_ps->reset_ul |= SAND_HAL_XC_XCVR_CNTL_RESET_CF_RESET_N_MASK;
+	}
+}
+#endif /* CONFIG_IDE_RESET */
+
+/*************************************************************************
+ *  fpga_init
+ *
+ *
+ *
+ ************************************************************************/
+void fpga_init(void)
+{
+	OPTO_FPGA_REGS_ST *opto_ps;
+	unsigned char opto_rev;
+	unsigned long tmp;
+
+	/* Ensure we have power all around */
+	udelay(500);
+
+	/*
+	 * Take appropriate hw bits out of reset
+	 */
+	opto_ps = (OPTO_FPGA_REGS_ST *)CFG_FPGA_BASE;
+
+	tmp =
+	    SAND_HAL_XC_XCVR_CNTL_RESET_MAC1_RESET_N_MASK |
+	    SAND_HAL_XC_XCVR_CNTL_RESET_MAC0_RESET_N_MASK |
+	    SAND_HAL_XC_XCVR_CNTL_RESET_BME_RESET_N_MASK |
+	    SAND_HAL_XC_XCVR_CNTL_RESET_ACE_RESET_N_MASK |
+	    SAND_HAL_XC_XCVR_CNTL_RESET_CF_RESET_N_MASK |
+	    SAND_HAL_XC_XCVR_CNTL_RESET_QE_A_RESET_N_MASK |
+	    SAND_HAL_XC_XCVR_CNTL_RESET_IFE_A_RESET_N_MASK |
+	    SAND_HAL_XC_XCVR_CNTL_RESET_EFE_A_RESET_N_MASK |
+	    SAND_HAL_XC_XCVR_CNTL_RESET_QE_B_RESET_N_MASK |
+	    SAND_HAL_XC_XCVR_CNTL_RESET_IFE_B_RESET_N_MASK |
+	    SAND_HAL_XC_XCVR_CNTL_RESET_EFE_B_RESET_N_MASK |
+	    SAND_HAL_XC_XCVR_CNTL_RESET_LOCK1_RESET_N_MASK |
+	    SAND_HAL_XC_XCVR_CNTL_RESET_LOCK0_RESET_N_MASK |
+	    SAND_HAL_XC_XCVR_CNTL_RESET_I2C_MUX1_RESET_N_MASK |
+	    SAND_HAL_XC_XCVR_CNTL_RESET_I2C_MUX0_RESET_N_MASK |
+	    SAND_HAL_XC_XCVR_CNTL_RESET_PHY0_RESET_N_MASK |
+	    SAND_HAL_XC_XCVR_CNTL_RESET_PHY1_RESET_N_MASK |
+	    SAND_HAL_XC_XCVR_CNTL_RESET_SLAVE_RESET_N_MASK;
+	opto_ps->reset_ul = tmp;
+	/*
+	 * Turn on the 'Slow Blink' for the System Error Led.
+	 * Ensure FPGA rev is up to at least rev 0x12
+	 */
+	opto_rev = (unsigned char)((opto_ps->revision_ul &
+				    SAND_HAL_XC_XCVR_CNTL_REVISION_REVISION_MASK)
+				   >> SAND_HAL_XC_XCVR_CNTL_REVISION_REVISION_SHIFT);
+	if(0x12 <= opto_rev) {
+	    opto_ps->control_ul |= 1 << SAND_HAL_XC_XCVR_CNTL_CNTL_ERROR_LED_SHIFT;
+	}
+
+	asm("eieio");
+
+	return;
+}
+
+
+
+int metroboxSetupVars(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	unsigned short sernum;
+	char envstr[255];
+
+	sernum = sbcommon_get_serial_number();
+
+	memset(envstr, 0, 255);
+	/*
+	 * Setup our ip address
+	 */
+	sprintf(envstr, "10.100.60.%d", sernum);
+
+	setenv("ipaddr", envstr);
+	/*
+	 * Setup the host ip address
+	 */
+	setenv("serverip", "10.100.17.10");
+
+	/*
+	 * Setup default bootargs
+	 */
+	memset(envstr, 0, 255);
+
+	sprintf(envstr, "console=ttyS0,9600 root=/dev/nfs "
+		"rw nfsroot=10.100.17.10:/home/metrobox/mbc%d "
+		"nfsaddrs=10.100.60.%d:10.100.17.10:10.100.1.1"
+		":255.255.0.0:metrobox%d.sandburst.com:eth0:none idebus=33",
+		sernum, sernum, sernum);
+
+	setenv("bootargs_nfs", envstr);
+	setenv("bootargs", envstr);
+
+	/*
+	 * Setup CF bootargs
+	 */
+	memset(envstr, 0, 255);
+	sprintf(envstr, "console=ttyS0,9600 root=/dev/hda2 "
+		"rw ip=10.100.60.%d:::255.255.0.0:metrobox%d:eth0:none idebus=33",
+		sernum, sernum);
+
+	setenv("bootargs_cf", envstr);
+
+	/*
+	 * Setup Default boot command
+	 */
+	setenv("bootcmd_tftp", "tftp 8000000 pImage.metrobox;bootm 8000000");
+	setenv("bootcmd", "tftp 8000000 pImage.metrobox;bootm 8000000");
+
+	/*
+	 * Setup compact flash boot command
+	 */
+	setenv("bootcmd_cf", "fatload ide 0 8000000 pimage.metrobox;bootm 8000000");
+
+	saveenv();
+
+
+	return(1);
+}
+
+
+int metroboxRecover(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	unsigned short sernum;
+	char envstr[255];
+
+	sernum = sbcommon_get_serial_number();
+
+	printf("\nSetting up environment for filesystem recovery\n");
+	/*
+	 * Setup default bootargs
+	 */
+	memset(envstr, 0, 255);
+	sprintf(envstr, "console=ttyS0,9600 root=/dev/ram0 "
+		"rw ip=10.100.60.%d:::255.255.0.0:metrobox%d:eth0:none",
+		sernum, sernum);
+
+	setenv("bootargs", envstr);
+
+	/*
+	 * Setup Default boot command
+	 */
+	setenv("bootcmd", "fatload ide 0 8000000 pimage.metrobox;"
+	       "fatload ide 0 8100000 pramdisk;"
+	       "bootm 8000000 8100000");
+
+	printf("Done.  Please type boot<cr>.\nWhen the kernel has booted"
+	       " please type fsrecover.sh<cr>\n");
+
+	return(1);
+}
+
+
+
+
+
+
+
+U_BOOT_CMD(mbsetup, 1, 1, metroboxSetupVars,
+	   "mbsetup - Set environment to factory defaults\n", NULL);
+
+U_BOOT_CMD(mbrecover, 1, 1, metroboxRecover,
+	   "mbrecover - Set environment to allow for fs recovery\n", NULL);
+
diff --git a/board/sandburst/metrobox/metrobox.h b/board/sandburst/metrobox/metrobox.h
new file mode 100644
index 0000000..964dc71
--- /dev/null
+++ b/board/sandburst/metrobox/metrobox.h
@@ -0,0 +1,48 @@
+#ifndef __METROBOX_H__
+#define __METROBOX_H__
+/*
+ * (C) Copyright 2005
+ * Travis B. Sawyer, Sandburst Corporation, tsawyer@sandburst.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+typedef struct metrobox_board_id_s {
+	const char name[40];
+} METROBOX_BOARD_ID_ST, *METROBOX_BOARD_ID_PST;
+
+
+/* Metrobox Opto-FPGA registers and definitions */
+#include "hal_xc_auto.h"
+typedef struct opto_fpga_regs_s
+{
+    volatile unsigned long revision_ul;   /* Read Only  */
+    volatile unsigned long reset_ul;      /* Read/Write */
+    volatile unsigned long status_ul;     /* Read Only  */
+    volatile unsigned long interrupt_ul;  /* Read Only  */
+    volatile unsigned long mask_ul;       /* Read/Write */
+    volatile unsigned long scratch_ul;    /* Read/Write */
+    volatile unsigned long scrmask_ul;    /* Read/Write */
+    volatile unsigned long control_ul;    /* Read/Write */
+    volatile unsigned long boardinfo_ul;  /* Read Only  */
+} OPTO_FPGA_REGS_ST __attribute__((packed)), *OPTO_FPGA_REGS_PST;
+
+
+
+#endif /* __METROBOX_H__ */
diff --git a/board/sandburst/metrobox/metrobox_version.h b/board/sandburst/metrobox/metrobox_version.h
new file mode 100644
index 0000000..1b6fee5
--- /dev/null
+++ b/board/sandburst/metrobox/metrobox_version.h
@@ -0,0 +1,27 @@
+#ifndef _METROBOX_VERSION_H_
+#define _METROBOX_VERSION_H_
+/*
+ * (C) Copyright 2005
+ * Travis B. Sawyer, Sandburst Corporation, tsawyer@sandburst.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#define METROBOX_U_BOOT_REL_STR "Release 2.0.3"
+
+#endif
diff --git a/board/sandburst/metrobox/u-boot.lds b/board/sandburst/metrobox/u-boot.lds
new file mode 100644
index 0000000..0fdb166
--- /dev/null
+++ b/board/sandburst/metrobox/u-boot.lds
@@ -0,0 +1,156 @@
+/*
+ * (C) Copyright 2005
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ * Travis B. Sawyer, Sandburst Corporation, tsawyer@sandburst.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  .resetvec 0xFFFFFFFC :
+  {
+    *(.resetvec)
+  } = 0xffff
+
+  .bootpg 0xFFFFF000 :
+  {
+    cpu/ppc4xx/start.o	(.bootpg)
+  } = 0xffff
+
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)	}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)	}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)	}
+  .rela.got      : { *(.rela.got)	}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)	}
+  .rela.bss      : { *(.rela.bss)	}
+  .rel.plt       : { *(.rel.plt)	}
+  .rela.plt      : { *(.rela.plt)	}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    /* WARNING - the following is hand-optimized to fit within	*/
+    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
+
+    cpu/ppc4xx/start.o	(.text)
+    board/sandburst/metrobox/init.o	(.text)
+    cpu/ppc4xx/kgdb.o	(.text)
+    cpu/ppc4xx/traps.o	(.text)
+    cpu/ppc4xx/interrupts.o	(.text)
+    cpu/ppc4xx/serial.o	(.text)
+    cpu/ppc4xx/cpu_init.o	(.text)
+    cpu/ppc4xx/speed.o	(.text)
+    cpu/ppc4xx/440gx_enet.o	(.text)
+    common/dlmalloc.o	(.text)
+    lib_generic/crc32.o		(.text)
+    lib_ppc/extable.o	(.text)
+    lib_generic/zlib.o		(.text)
+
+/*    . = env_offset;*/
+/*    common/environment.o(.text)*/
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}
diff --git a/board/sandburst/metrobox/u-boot.lds.debug b/board/sandburst/metrobox/u-boot.lds.debug
new file mode 100644
index 0000000..459a1d8
--- /dev/null
+++ b/board/sandburst/metrobox/u-boot.lds.debug
@@ -0,0 +1,145 @@
+/*
+ * (C) Copyright 2002-2005
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ * Travis B. Sawyer, Sandburst Corporation, tsawyer@sandburst.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)	}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)	}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)	}
+  .rela.got      : { *(.rela.got)	}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)	}
+  .rela.bss      : { *(.rela.bss)	}
+  .rel.plt       : { *(.rel.plt)	}
+  .rela.plt      : { *(.rela.plt)	}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    /* WARNING - the following is hand-optimized to fit within	*/
+    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
+
+    cpu/ppc4xx/start.o	(.text)
+    board/sandburst/metrobox/init.o (.text)
+    cpu/ppc4xx/kgdb.o	(.text)
+    cpu/ppc4xx/traps.o	(.text)
+    cpu/ppc4xx/interrupts.o	(.text)
+    cpu/ppc4xx/serial.o	(.text)
+    cpu/ppc4xx/cpu_init.o	(.text)
+    cpu/ppc4xx/speed.o	(.text)
+    cpu/ppc4xx/440gx_enet.o	(.text)
+    common/dlmalloc.o	(.text)
+    lib_generic/crc32.o		(.text)
+    lib_ppc/extable.o	(.text)
+    lib_generic/zlib.o		(.text)
+
+/*    common/environment.o(.text) */
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x0FFF) & 0xFFFFF000;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}