| /* |
| * (C) Copyright 2002 |
| * Daniel Engström, Omicron Ceti AB <daniel@omicron.se>. |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #ifndef _ASM_IC_SC520_H_ |
| #define _ASM_IC_SC520_H_ 1 |
| |
| #ifndef __ASSEMBLY__ |
| |
| void init_sc520(void); |
| unsigned long init_sc520_dram(void); |
| void sc520_udelay(unsigned long usec); |
| |
| /* Memory mapped configuration registers */ |
| typedef struct sc520_mmcr { |
| u16 revid; /* ElanSC520 microcontroller revision id */ |
| u8 cpuctl; /* am5x86 CPU control */ |
| |
| u8 pad_0x003[0x0d]; |
| |
| u8 drcctl; /* SDRAM control */ |
| u8 pad_0x011[0x01]; |
| u8 drctmctl; /* SDRAM timing control */ |
| u8 pad_0x013[0x01]; |
| u16 drccfg; /* SDRAM bank configuration*/ |
| u8 pad_0x016[0x02]; |
| u32 drcbendadr; /* SDRAM bank 0-3 ending address*/ |
| u8 pad_0x01c[0x04]; |
| u8 eccctl; /* ECC control */ |
| u8 eccsta; /* ECC status */ |
| u8 eccckbpos; /* ECC check bit position */ |
| u8 ecccktest; /* ECC Check Code Test */ |
| u32 eccsbadd; /* ECC single-bit error address */ |
| u32 eccmbadd; /* ECC multi-bit error address */ |
| |
| u8 pad_0x02c[0x14]; |
| |
| u8 dbctl; /* SDRAM buffer control */ |
| |
| u8 pad_0x041[0x0f]; |
| |
| u16 bootcsctl; /* /BOOTCS control */ |
| u8 pad_0x052[0x02]; |
| u16 romcs1ctl; /* /ROMCS1 control */ |
| u16 romcs2ctl; /* /ROMCS2 control */ |
| |
| u8 pad_0x058[0x08]; |
| |
| u16 hbctl; /* host bridge control */ |
| u16 hbtgtirqctl; /* host bridge target interrupt control */ |
| u16 hbtgtirqsta; /* host bridge target interrupt status */ |
| u16 hbmstirqctl; /* host bridge target interrupt control */ |
| u16 hbmstirqsta; /* host bridge master interrupt status */ |
| u8 pad_0x06a[0x02]; |
| u32 mstintadd; /* host bridge master interrupt address */ |
| |
| u8 sysarbctl; /* system arbiter control */ |
| u8 pciarbsta; /* PCI bus arbiter status */ |
| u16 sysarbmenb; /* system arbiter master enable */ |
| u32 arbprictl; /* arbiter priority control */ |
| |
| u8 pad_0x078[0x08]; |
| |
| u8 adddecctl; /* address decode control */ |
| u8 pad_0x081[0x01]; |
| u16 wpvsta; /* write-protect violation status */ |
| u8 pad_0x084[0x04]; |
| u32 par[16]; /* programmable address regions */ |
| |
| u8 pad_0x0c8[0x0b38]; |
| |
| u8 gpecho; /* GP echo mode */ |
| u8 gpcsdw; /* GP chip select data width */ |
| u16 gpcsqual; /* GP chip select qualification */ |
| u8 pad_0xc04[0x4]; |
| u8 gpcsrt; /* GP chip select recovery time */ |
| u8 gpcspw; /* GP chip select pulse width */ |
| u8 gpcsoff; /* GP chip select offset */ |
| u8 gprdw; /* GP read pulse width */ |
| u8 gprdoff; /* GP read offset */ |
| u8 gpwrw; /* GP write pulse width */ |
| u8 gpwroff; /* GP write offset */ |
| u8 gpalew; /* GP ale pulse width */ |
| u8 gpaleoff; /* GP ale offset */ |
| |
| u8 pad_0xc11[0x0f]; |
| |
| u16 piopfs15_0; /* PIO15-PIO0 pin function select */ |
| u16 piopfs31_16; /* PIO31-PIO16 pin function select */ |
| u8 cspfs; /* chip select pin function select */ |
| u8 pad_0xc25[0x01]; |
| u8 clksel; /* clock select */ |
| u8 pad_0xc27[0x01]; |
| u16 dsctl; /* drive strength control */ |
| u16 piodir15_0; /* PIO15-PIO0 direction */ |
| u16 piodir31_16; /* PIO31-PIO16 direction */ |
| u8 pad_0xc2e[0x02]; |
| u16 piodata15_0 ; /* PIO15-PIO0 data */ |
| u16 piodata31_16; /* PIO31-PIO16 data */ |
| u16 pioset15_0; /* PIO15-PIO0 set */ |
| u16 pioset31_16; /* PIO31-PIO16 set */ |
| u16 pioclr15_0; /* PIO15-PIO0 clear */ |
| u16 pioclr31_16; /* PIO31-PIO16 clear */ |
| |
| u8 pad_0xc3c[0x24]; |
| |
| u16 swtmrmilli; /* software timer millisecond count */ |
| u16 swtmrmicro; /* software timer microsecond count */ |
| u8 swtmrcfg; /* software timer configuration */ |
| |
| u8 pad_0xc65[0x0b]; |
| |
| u8 gptmrsta; /* GP timers status register */ |
| u8 pad_0xc71; |
| u16 gptmr0ctl; /* GP timer 0 mode/control */ |
| u16 gptmr0cnt; /* GP timer 0 count */ |
| u16 gptmr0maxcmpa; /* GP timer 0 maxcount compare A */ |
| u16 gptmr0maxcmpb; /* GP timer 0 maxcount compare B */ |
| u16 gptmr1ctl; /* GP timer 1 mode/control */ |
| u16 gptmr1cnt; /* GP timer 1 count */ |
| u16 gptmr1maxcmpa; /* GP timer 1 maxcount compare A */ |
| u16 gptmr1maxcmpb; /* GP timer 1 maxcount compare B*/ |
| u16 gptmr2ctl; /* GP timer 2 mode/control */ |
| u16 gptmr2cnt; /* GP timer 2 count */ |
| u8 pad_0xc86[0x08]; |
| u16 gptmr2maxcmpa; /* GP timer 2 maxcount compare A */ |
| |
| u8 pad_0xc90[0x20]; |
| |
| u16 wdtmrctl; /* watchdog timer control */ |
| u16 wdtmrcntl; /* watchdog timer count low */ |
| u16 wdtmrcnth; /* watchdog timer count high */ |
| |
| u8 pad_0xcb6[0x0a]; |
| |
| u8 uart1ctl; /* UART 1 general control */ |
| u8 uart1sta; /* UART 1 general status */ |
| u8 uart1fcrshad; /* UART 1 FIFO control shadow */ |
| u8 pad_0xcc3[0x01]; |
| u8 uart2ctl; /* UART 2 general control */ |
| u8 uart2sta; /* UART 2 general status */ |
| u8 uart2fcrshad; /* UART 2 FIFO control shadow */ |
| |
| u8 pad_0xcc7[0x09]; |
| |
| u8 ssictl; /* SSI control */ |
| u8 ssixmit; /* SSI transmit */ |
| u8 ssicmd; /* SSI command */ |
| u8 ssista; /* SSI status */ |
| u8 ssircv; /* SSI receive */ |
| |
| u8 pad_0xcd5[0x2b]; |
| |
| u8 picicr; /* interrupt control */ |
| u8 pad_0xd01[0x01]; |
| u8 pic_mode[3]; /* PIC interrupt mode */ |
| u8 pad_0xd05[0x03]; |
| u16 swint16_1; /* software interrupt 16-1 control */ |
| u8 swint22_17; /* software interrupt 22-17/NMI control */ |
| u8 pad_0xd0b[0x05]; |
| u16 intpinpol; /* interrupt pin polarity */ |
| u8 pad_0xd12[0x02]; |
| u16 pcihostmap; /* PCI host bridge interrupt mapping */ |
| u8 pad_0xd16[0x02]; |
| u16 eccmap; /* ECC interrupt mapping */ |
| u8 gp_tmr_int_map[3]; /* GP timer interrupt mapping */ |
| u8 pad_0xd1d[0x03]; |
| u8 pit_int_map[3]; /* PIT interrupt mapping */ |
| u8 pad_0xd23[0x05]; |
| u8 uart_int_map[2]; /* UART interrupt mapping */ |
| u8 pad_0xd2a[0x06]; |
| u8 pci_int_map[4]; /* PCI interrupt mapping (A through D)*/ |
| u8 pad_0xd34[0x0c]; |
| u8 dmabcintmap; /* DMA buffer chaining interrupt mapping */ |
| u8 ssimap; /* SSI interrupt mapping register */ |
| u8 wdtmap; /* watchdog timer interrupt mapping */ |
| u8 rtcmap; /* RTC interrupt mapping register */ |
| u8 wpvmap; /* write-protect interrupt mapping */ |
| u8 icemap; /* AMDebug JTAG Rx/Tx interrupt mapping */ |
| u8 ferrmap; /* floating point error interrupt mapping */ |
| u8 pad_0xd47[0x09]; |
| u8 gp_int_map[11]; /* GP IRQ interrupt mapping */ |
| |
| u8 pad_0xd5b[0x15]; |
| |
| u8 sysinfo; /* system board information */ |
| u8 pad_0xd71[0x01]; |
| u8 rescfg; /* reset configuration */ |
| u8 pad_0xd73[0x01]; |
| u8 ressta; /* reset status */ |
| |
| u8 pad_0xd75[0x0b]; |
| |
| u8 gpdmactl; /* GP-DMA Control */ |
| u8 gpdmammio; /* GP-DMA memory-mapped I/O */ |
| u16 gpdmaextchmapa; /* GP-DMA resource channel map a */ |
| u16 gpdmaextchmapb; /* GP-DMA resource channel map b */ |
| u8 gp_dma_ext_pg_0; /* GP-DMA channel extended page 0 */ |
| u8 gp_dma_ext_pg_1; /* GP-DMA channel extended page 0 */ |
| u8 gp_dma_ext_pg_2; /* GP-DMA channel extended page 0 */ |
| u8 gp_dma_ext_pg_3; /* GP-DMA channel extended page 0 */ |
| u8 gp_dma_ext_pg_5; /* GP-DMA channel extended page 0 */ |
| u8 gp_dma_ext_pg_6; /* GP-DMA channel extended page 0 */ |
| u8 gp_dma_ext_pg_7; /* GP-DMA channel extended page 0 */ |
| u8 pad_0xd8d[0x03]; |
| u8 gpdmaexttc3; /* GP-DMA channel 3 extender transfer count */ |
| u8 gpdmaexttc5; /* GP-DMA channel 5 extender transfer count */ |
| u8 gpdmaexttc6; /* GP-DMA channel 6 extender transfer count */ |
| u8 gpdmaexttc7; /* GP-DMA channel 7 extender transfer count */ |
| u8 pad_0xd94[0x4]; |
| u8 gpdmabcctl; /* buffer chaining control */ |
| u8 gpdmabcsta; /* buffer chaining status */ |
| u8 gpdmabsintenb; /* buffer chaining interrupt enable */ |
| u8 gpdmabcval; /* buffer chaining valid */ |
| u8 pad_0xd9c[0x04]; |
| u16 gpdmanxtaddl3; /* GP-DMA channel 3 next address low */ |
| u16 gpdmanxtaddh3; /* GP-DMA channel 3 next address high */ |
| u16 gpdmanxtaddl5; /* GP-DMA channel 5 next address low */ |
| u16 gpdmanxtaddh5; /* GP-DMA channel 5 next address high */ |
| u16 gpdmanxtaddl6; /* GP-DMA channel 6 next address low */ |
| u16 gpdmanxtaddh6; /* GP-DMA channel 6 next address high */ |
| u16 gpdmanxtaddl7; /* GP-DMA channel 7 next address low */ |
| u16 gpdmanxtaddh7; /* GP-DMA channel 7 next address high */ |
| u16 gpdmanxttcl3; /* GP-DMA channel 3 next transfer count low */ |
| u16 gpdmanxttch3; /* GP-DMA channel 3 next transfer count high */ |
| u16 gpdmanxttcl5; /* GP-DMA channel 5 next transfer count low */ |
| u16 gpdmanxttch5; /* GP-DMA channel 5 next transfer count high */ |
| u16 gpdmanxttcl6; /* GP-DMA channel 6 next transfer count low */ |
| u16 gpdmanxttch6; /* GP-DMA channel 6 next transfer count high */ |
| u16 gpdmanxttcl7; /* GP-DMA channel 7 next transfer count low */ |
| u16 gpdmanxttch7; /* GP-DMA channel 7 next transfer count high */ |
| |
| u8 pad_0xdc0[0x0240]; |
| } sc520_mmcr_t; |
| |
| extern volatile sc520_mmcr_t *sc520_mmcr; |
| |
| #endif |
| |
| /* MMCR Offsets (required for assembler code */ |
| #define SC520_DBCTL 0x0040 /* SDRAM Buffer Control Register */ |
| #define SC520_PAR14 0x00c0 /* Programmable Address Region 14 Register */ |
| #define SC520_PAR15 0x00c4 /* Programmable Address Region 15 Register */ |
| #define SC520_SWTMRMILLI 0x0c60 /* Software Timer Millisecond Count */ |
| #define SC520_SWTMRMICRO 0x0c62 /* Software Timer Microsecond Count */ |
| |
| /* MMCR Register bits (not all of them :) ) */ |
| |
| /* SSI Stuff */ |
| #define CTL_CLK_SEL_4 0x00 /* Nominal Bit Rate = 8 MHz */ |
| #define CTL_CLK_SEL_8 0x10 /* Nominal Bit Rate = 4 MHz */ |
| #define CTL_CLK_SEL_16 0x20 /* Nominal Bit Rate = 2 MHz */ |
| #define CTL_CLK_SEL_32 0x30 /* Nominal Bit Rate = 1 MHz */ |
| #define CTL_CLK_SEL_64 0x40 /* Nominal Bit Rate = 512 KHz */ |
| #define CTL_CLK_SEL_128 0x50 /* Nominal Bit Rate = 256 KHz */ |
| #define CTL_CLK_SEL_256 0x60 /* Nominal Bit Rate = 128 KHz */ |
| #define CTL_CLK_SEL_512 0x70 /* Nominal Bit Rate = 64 KHz */ |
| |
| #define TC_INT_ENB 0x08 /* Transaction Complete Interrupt Enable */ |
| #define PHS_INV_ENB 0x04 /* SSI Inverted Phase Mode Enable */ |
| #define CLK_INV_ENB 0x02 /* SSI Inverted Clock Mode Enable */ |
| #define MSBF_ENB 0x01 /* SSI Most Significant Bit First Mode Enable */ |
| |
| #define SSICMD_CMD_SEL_XMITRCV 0x03 /* Simultaneous Transmit / Receive Transaction */ |
| #define SSICMD_CMD_SEL_RCV 0x02 /* Receive Transaction */ |
| #define SSICMD_CMD_SEL_XMIT 0x01 /* Transmit Transaction */ |
| #define SSISTA_BSY 0x02 /* SSI Busy */ |
| #define SSISTA_TC_INT 0x01 /* SSI Transaction Complete Interrupt */ |
| |
| /* BITS for SC520_ADDDECCTL: */ |
| #define WPV_INT_ENB 0x80 /* Write-Protect Violation Interrupt Enable */ |
| #define IO_HOLE_DEST_PCI 0x10 /* I/O Hole Access Destination */ |
| #define RTC_DIS 0x04 /* RTC Disable */ |
| #define UART2_DIS 0x02 /* UART2 Disable */ |
| #define UART1_DIS 0x01 /* UART1 Disable */ |
| |
| /* 0x28000000 - 0x3fffffff is used by the flash banks */ |
| |
| /* 0x40000000 - 0xffffffff is not adressable by the SC520 */ |
| |
| /* priority numbers used for interrupt channel mappings */ |
| #define SC520_IRQ_DISABLED 0 |
| #define SC520_IRQ0 1 |
| #define SC520_IRQ1 2 |
| #define SC520_IRQ2 4 /* same as IRQ9 */ |
| #define SC520_IRQ3 11 |
| #define SC520_IRQ4 12 |
| #define SC520_IRQ5 13 |
| #define SC520_IRQ6 21 |
| #define SC520_IRQ7 22 |
| #define SC520_IRQ8 3 |
| #define SC520_IRQ9 4 |
| #define SC520_IRQ10 5 |
| #define SC520_IRQ11 6 |
| #define SC520_IRQ12 7 |
| #define SC520_IRQ13 8 |
| #define SC520_IRQ14 9 |
| #define SC520_IRQ15 10 |
| |
| #endif |