| // SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause |
| /* |
| * Copyright (C) 2018, STMicroelectronics - All Rights Reserved |
| */ |
| |
| #define LOG_CATEGORY UCLASS_RAM |
| |
| #include <common.h> |
| #include <clk.h> |
| #include <log.h> |
| #include <ram.h> |
| #include <reset.h> |
| #include <timer.h> |
| #include <asm/io.h> |
| #include <asm/arch/ddr.h> |
| #include <linux/bitops.h> |
| #include <linux/delay.h> |
| #include <linux/iopoll.h> |
| #include "stm32mp1_ddr.h" |
| #include "stm32mp1_ddr_regs.h" |
| |
| #define RCC_DDRITFCR 0xD8 |
| |
| #define RCC_DDRITFCR_DDRCAPBRST (BIT(14)) |
| #define RCC_DDRITFCR_DDRCAXIRST (BIT(15)) |
| #define RCC_DDRITFCR_DDRCORERST (BIT(16)) |
| #define RCC_DDRITFCR_DPHYAPBRST (BIT(17)) |
| #define RCC_DDRITFCR_DPHYRST (BIT(18)) |
| #define RCC_DDRITFCR_DPHYCTLRST (BIT(19)) |
| #define RCC_DDRITFCR_DDRCKMOD_MASK GENMASK(22, 20) |
| #define RCC_DDRITFCR_DDRCKMOD_ASR BIT(20) |
| |
| struct reg_desc { |
| const char *name; |
| u16 offset; /* offset for base address */ |
| u8 par_offset; /* offset for parameter array */ |
| }; |
| |
| #define INVALID_OFFSET 0xFF |
| |
| #define DDRCTL_REG(x, y) \ |
| {#x,\ |
| offsetof(struct stm32mp1_ddrctl, x),\ |
| offsetof(struct y, x)} |
| |
| #define DDRPHY_REG(x, y) \ |
| {#x,\ |
| offsetof(struct stm32mp1_ddrphy, x),\ |
| offsetof(struct y, x)} |
| |
| #define DDR_REG_DYN(x) \ |
| {#x,\ |
| offsetof(struct stm32mp1_ddrctl, x),\ |
| INVALID_OFFSET} |
| |
| #define DDRPHY_REG_DYN(x) \ |
| {#x,\ |
| offsetof(struct stm32mp1_ddrphy, x),\ |
| INVALID_OFFSET} |
| |
| /*********************************************************** |
| * PARAMETERS: value get from device tree : |
| * size / order need to be aligned with binding |
| * modification NOT ALLOWED !!! |
| ***********************************************************/ |
| #define DDRCTL_REG_REG_SIZE 25 /* st,ctl-reg */ |
| #define DDRCTL_REG_TIMING_SIZE 12 /* st,ctl-timing */ |
| #define DDRCTL_REG_MAP_SIZE 9 /* st,ctl-map */ |
| #define DDRCTL_REG_PERF_SIZE 17 /* st,ctl-perf */ |
| |
| #define DDRPHY_REG_REG_SIZE 11 /* st,phy-reg */ |
| #define DDRPHY_REG_TIMING_SIZE 10 /* st,phy-timing */ |
| |
| #define DDRCTL_REG_REG(x) DDRCTL_REG(x, stm32mp1_ddrctrl_reg) |
| static const struct reg_desc ddr_reg[DDRCTL_REG_REG_SIZE] = { |
| DDRCTL_REG_REG(mstr), |
| DDRCTL_REG_REG(mrctrl0), |
| DDRCTL_REG_REG(mrctrl1), |
| DDRCTL_REG_REG(derateen), |
| DDRCTL_REG_REG(derateint), |
| DDRCTL_REG_REG(pwrctl), |
| DDRCTL_REG_REG(pwrtmg), |
| DDRCTL_REG_REG(hwlpctl), |
| DDRCTL_REG_REG(rfshctl0), |
| DDRCTL_REG_REG(rfshctl3), |
| DDRCTL_REG_REG(crcparctl0), |
| DDRCTL_REG_REG(zqctl0), |
| DDRCTL_REG_REG(dfitmg0), |
| DDRCTL_REG_REG(dfitmg1), |
| DDRCTL_REG_REG(dfilpcfg0), |
| DDRCTL_REG_REG(dfiupd0), |
| DDRCTL_REG_REG(dfiupd1), |
| DDRCTL_REG_REG(dfiupd2), |
| DDRCTL_REG_REG(dfiphymstr), |
| DDRCTL_REG_REG(odtmap), |
| DDRCTL_REG_REG(dbg0), |
| DDRCTL_REG_REG(dbg1), |
| DDRCTL_REG_REG(dbgcmd), |
| DDRCTL_REG_REG(poisoncfg), |
| DDRCTL_REG_REG(pccfg), |
| }; |
| |
| #define DDRCTL_REG_TIMING(x) DDRCTL_REG(x, stm32mp1_ddrctrl_timing) |
| static const struct reg_desc ddr_timing[DDRCTL_REG_TIMING_SIZE] = { |
| DDRCTL_REG_TIMING(rfshtmg), |
| DDRCTL_REG_TIMING(dramtmg0), |
| DDRCTL_REG_TIMING(dramtmg1), |
| DDRCTL_REG_TIMING(dramtmg2), |
| DDRCTL_REG_TIMING(dramtmg3), |
| DDRCTL_REG_TIMING(dramtmg4), |
| DDRCTL_REG_TIMING(dramtmg5), |
| DDRCTL_REG_TIMING(dramtmg6), |
| DDRCTL_REG_TIMING(dramtmg7), |
| DDRCTL_REG_TIMING(dramtmg8), |
| DDRCTL_REG_TIMING(dramtmg14), |
| DDRCTL_REG_TIMING(odtcfg), |
| }; |
| |
| #define DDRCTL_REG_MAP(x) DDRCTL_REG(x, stm32mp1_ddrctrl_map) |
| static const struct reg_desc ddr_map[DDRCTL_REG_MAP_SIZE] = { |
| DDRCTL_REG_MAP(addrmap1), |
| DDRCTL_REG_MAP(addrmap2), |
| DDRCTL_REG_MAP(addrmap3), |
| DDRCTL_REG_MAP(addrmap4), |
| DDRCTL_REG_MAP(addrmap5), |
| DDRCTL_REG_MAP(addrmap6), |
| DDRCTL_REG_MAP(addrmap9), |
| DDRCTL_REG_MAP(addrmap10), |
| DDRCTL_REG_MAP(addrmap11), |
| }; |
| |
| #define DDRCTL_REG_PERF(x) DDRCTL_REG(x, stm32mp1_ddrctrl_perf) |
| static const struct reg_desc ddr_perf[DDRCTL_REG_PERF_SIZE] = { |
| DDRCTL_REG_PERF(sched), |
| DDRCTL_REG_PERF(sched1), |
| DDRCTL_REG_PERF(perfhpr1), |
| DDRCTL_REG_PERF(perflpr1), |
| DDRCTL_REG_PERF(perfwr1), |
| DDRCTL_REG_PERF(pcfgr_0), |
| DDRCTL_REG_PERF(pcfgw_0), |
| DDRCTL_REG_PERF(pcfgqos0_0), |
| DDRCTL_REG_PERF(pcfgqos1_0), |
| DDRCTL_REG_PERF(pcfgwqos0_0), |
| DDRCTL_REG_PERF(pcfgwqos1_0), |
| DDRCTL_REG_PERF(pcfgr_1), |
| DDRCTL_REG_PERF(pcfgw_1), |
| DDRCTL_REG_PERF(pcfgqos0_1), |
| DDRCTL_REG_PERF(pcfgqos1_1), |
| DDRCTL_REG_PERF(pcfgwqos0_1), |
| DDRCTL_REG_PERF(pcfgwqos1_1), |
| }; |
| |
| #define DDRPHY_REG_REG(x) DDRPHY_REG(x, stm32mp1_ddrphy_reg) |
| static const struct reg_desc ddrphy_reg[DDRPHY_REG_REG_SIZE] = { |
| DDRPHY_REG_REG(pgcr), |
| DDRPHY_REG_REG(aciocr), |
| DDRPHY_REG_REG(dxccr), |
| DDRPHY_REG_REG(dsgcr), |
| DDRPHY_REG_REG(dcr), |
| DDRPHY_REG_REG(odtcr), |
| DDRPHY_REG_REG(zq0cr1), |
| DDRPHY_REG_REG(dx0gcr), |
| DDRPHY_REG_REG(dx1gcr), |
| DDRPHY_REG_REG(dx2gcr), |
| DDRPHY_REG_REG(dx3gcr), |
| }; |
| |
| #define DDRPHY_REG_TIMING(x) DDRPHY_REG(x, stm32mp1_ddrphy_timing) |
| static const struct reg_desc ddrphy_timing[DDRPHY_REG_TIMING_SIZE] = { |
| DDRPHY_REG_TIMING(ptr0), |
| DDRPHY_REG_TIMING(ptr1), |
| DDRPHY_REG_TIMING(ptr2), |
| DDRPHY_REG_TIMING(dtpr0), |
| DDRPHY_REG_TIMING(dtpr1), |
| DDRPHY_REG_TIMING(dtpr2), |
| DDRPHY_REG_TIMING(mr0), |
| DDRPHY_REG_TIMING(mr1), |
| DDRPHY_REG_TIMING(mr2), |
| DDRPHY_REG_TIMING(mr3), |
| }; |
| |
| /************************************************************** |
| * DYNAMIC REGISTERS: only used for debug purpose (read/modify) |
| **************************************************************/ |
| #ifdef CONFIG_STM32MP1_DDR_INTERACTIVE |
| static const struct reg_desc ddr_dyn[] = { |
| DDR_REG_DYN(stat), |
| DDR_REG_DYN(init0), |
| DDR_REG_DYN(dfimisc), |
| DDR_REG_DYN(dfistat), |
| DDR_REG_DYN(swctl), |
| DDR_REG_DYN(swstat), |
| DDR_REG_DYN(pctrl_0), |
| DDR_REG_DYN(pctrl_1), |
| }; |
| |
| #define DDR_REG_DYN_SIZE ARRAY_SIZE(ddr_dyn) |
| |
| static const struct reg_desc ddrphy_dyn[] = { |
| DDRPHY_REG_DYN(pir), |
| DDRPHY_REG_DYN(pgsr), |
| DDRPHY_REG_DYN(zq0sr0), |
| DDRPHY_REG_DYN(zq0sr1), |
| DDRPHY_REG_DYN(dx0gsr0), |
| DDRPHY_REG_DYN(dx0gsr1), |
| DDRPHY_REG_DYN(dx0dllcr), |
| DDRPHY_REG_DYN(dx0dqtr), |
| DDRPHY_REG_DYN(dx0dqstr), |
| DDRPHY_REG_DYN(dx1gsr0), |
| DDRPHY_REG_DYN(dx1gsr1), |
| DDRPHY_REG_DYN(dx1dllcr), |
| DDRPHY_REG_DYN(dx1dqtr), |
| DDRPHY_REG_DYN(dx1dqstr), |
| DDRPHY_REG_DYN(dx2gsr0), |
| DDRPHY_REG_DYN(dx2gsr1), |
| DDRPHY_REG_DYN(dx2dllcr), |
| DDRPHY_REG_DYN(dx2dqtr), |
| DDRPHY_REG_DYN(dx2dqstr), |
| DDRPHY_REG_DYN(dx3gsr0), |
| DDRPHY_REG_DYN(dx3gsr1), |
| DDRPHY_REG_DYN(dx3dllcr), |
| DDRPHY_REG_DYN(dx3dqtr), |
| DDRPHY_REG_DYN(dx3dqstr), |
| }; |
| |
| #define DDRPHY_REG_DYN_SIZE ARRAY_SIZE(ddrphy_dyn) |
| |
| #endif |
| |
| /***************************************************************** |
| * REGISTERS ARRAY: used to parse device tree and interactive mode |
| *****************************************************************/ |
| enum reg_type { |
| REG_REG, |
| REG_TIMING, |
| REG_PERF, |
| REG_MAP, |
| REGPHY_REG, |
| REGPHY_TIMING, |
| #ifdef CONFIG_STM32MP1_DDR_INTERACTIVE |
| /* dynamic registers => managed in driver or not changed, |
| * can be dumped in interactive mode |
| */ |
| REG_DYN, |
| REGPHY_DYN, |
| #endif |
| REG_TYPE_NB |
| }; |
| |
| enum base_type { |
| DDR_BASE, |
| DDRPHY_BASE, |
| NONE_BASE |
| }; |
| |
| struct ddr_reg_info { |
| const char *name; |
| const struct reg_desc *desc; |
| u8 size; |
| enum base_type base; |
| }; |
| |
| const struct ddr_reg_info ddr_registers[REG_TYPE_NB] = { |
| [REG_REG] = { |
| "static", ddr_reg, DDRCTL_REG_REG_SIZE, DDR_BASE}, |
| [REG_TIMING] = { |
| "timing", ddr_timing, DDRCTL_REG_TIMING_SIZE, DDR_BASE}, |
| [REG_PERF] = { |
| "perf", ddr_perf, DDRCTL_REG_PERF_SIZE, DDR_BASE}, |
| [REG_MAP] = { |
| "map", ddr_map, DDRCTL_REG_MAP_SIZE, DDR_BASE}, |
| [REGPHY_REG] = { |
| "static", ddrphy_reg, DDRPHY_REG_REG_SIZE, DDRPHY_BASE}, |
| [REGPHY_TIMING] = { |
| "timing", ddrphy_timing, DDRPHY_REG_TIMING_SIZE, DDRPHY_BASE}, |
| #ifdef CONFIG_STM32MP1_DDR_INTERACTIVE |
| [REG_DYN] = { |
| "dyn", ddr_dyn, DDR_REG_DYN_SIZE, DDR_BASE}, |
| [REGPHY_DYN] = { |
| "dyn", ddrphy_dyn, DDRPHY_REG_DYN_SIZE, DDRPHY_BASE}, |
| #endif |
| |
| }; |
| |
| const char *base_name[] = { |
| [DDR_BASE] = "ctl", |
| [DDRPHY_BASE] = "phy", |
| }; |
| |
| static u32 get_base_addr(const struct ddr_info *priv, enum base_type base) |
| { |
| if (base == DDRPHY_BASE) |
| return (u32)priv->phy; |
| else |
| return (u32)priv->ctl; |
| } |
| |
| static void set_reg(const struct ddr_info *priv, |
| enum reg_type type, |
| const void *param) |
| { |
| unsigned int i; |
| unsigned int *ptr, value; |
| enum base_type base = ddr_registers[type].base; |
| u32 base_addr = get_base_addr(priv, base); |
| const struct reg_desc *desc = ddr_registers[type].desc; |
| |
| log_debug("init %s\n", ddr_registers[type].name); |
| for (i = 0; i < ddr_registers[type].size; i++) { |
| ptr = (unsigned int *)(base_addr + desc[i].offset); |
| if (desc[i].par_offset == INVALID_OFFSET) { |
| log_err("invalid parameter offset for %s", desc[i].name); |
| } else { |
| value = *((u32 *)((u32)param + |
| desc[i].par_offset)); |
| writel(value, ptr); |
| log_debug("[0x%x] %s= 0x%08x\n", |
| (u32)ptr, desc[i].name, value); |
| } |
| } |
| } |
| |
| #ifdef CONFIG_STM32MP1_DDR_INTERACTIVE |
| static void stm32mp1_dump_reg_desc(u32 base_addr, const struct reg_desc *desc) |
| { |
| unsigned int *ptr; |
| |
| ptr = (unsigned int *)(base_addr + desc->offset); |
| printf("%s= 0x%08x\n", desc->name, readl(ptr)); |
| } |
| |
| static void stm32mp1_dump_param_desc(u32 par_addr, const struct reg_desc *desc) |
| { |
| unsigned int *ptr; |
| |
| ptr = (unsigned int *)(par_addr + desc->par_offset); |
| printf("%s= 0x%08x\n", desc->name, readl(ptr)); |
| } |
| |
| static const struct reg_desc *found_reg(const char *name, enum reg_type *type) |
| { |
| unsigned int i, j; |
| const struct reg_desc *desc; |
| |
| for (i = 0; i < ARRAY_SIZE(ddr_registers); i++) { |
| desc = ddr_registers[i].desc; |
| for (j = 0; j < ddr_registers[i].size; j++) { |
| if (strcmp(name, desc[j].name) == 0) { |
| *type = i; |
| return &desc[j]; |
| } |
| } |
| } |
| *type = REG_TYPE_NB; |
| return NULL; |
| } |
| |
| int stm32mp1_dump_reg(const struct ddr_info *priv, |
| const char *name) |
| { |
| unsigned int i, j; |
| const struct reg_desc *desc; |
| u32 base_addr; |
| enum base_type p_base; |
| enum reg_type type; |
| const char *p_name; |
| enum base_type filter = NONE_BASE; |
| int result = -1; |
| |
| if (name) { |
| if (strcmp(name, base_name[DDR_BASE]) == 0) |
| filter = DDR_BASE; |
| else if (strcmp(name, base_name[DDRPHY_BASE]) == 0) |
| filter = DDRPHY_BASE; |
| } |
| |
| for (i = 0; i < ARRAY_SIZE(ddr_registers); i++) { |
| p_base = ddr_registers[i].base; |
| p_name = ddr_registers[i].name; |
| if (!name || (filter == p_base || !strcmp(name, p_name))) { |
| result = 0; |
| desc = ddr_registers[i].desc; |
| base_addr = get_base_addr(priv, p_base); |
| printf("==%s.%s==\n", base_name[p_base], p_name); |
| for (j = 0; j < ddr_registers[i].size; j++) |
| stm32mp1_dump_reg_desc(base_addr, &desc[j]); |
| } |
| } |
| if (result) { |
| desc = found_reg(name, &type); |
| if (desc) { |
| p_base = ddr_registers[type].base; |
| base_addr = get_base_addr(priv, p_base); |
| stm32mp1_dump_reg_desc(base_addr, desc); |
| result = 0; |
| } |
| } |
| return result; |
| } |
| |
| void stm32mp1_edit_reg(const struct ddr_info *priv, |
| char *name, char *string) |
| { |
| unsigned long *ptr, value; |
| enum reg_type type; |
| enum base_type base; |
| const struct reg_desc *desc; |
| u32 base_addr; |
| |
| desc = found_reg(name, &type); |
| |
| if (!desc) { |
| printf("%s not found\n", name); |
| return; |
| } |
| if (strict_strtoul(string, 16, &value) < 0) { |
| printf("invalid value %s\n", string); |
| return; |
| } |
| base = ddr_registers[type].base; |
| base_addr = get_base_addr(priv, base); |
| ptr = (unsigned long *)(base_addr + desc->offset); |
| writel(value, ptr); |
| printf("%s= 0x%08x\n", desc->name, readl(ptr)); |
| } |
| |
| static u32 get_par_addr(const struct stm32mp1_ddr_config *config, |
| enum reg_type type) |
| { |
| u32 par_addr = 0x0; |
| |
| switch (type) { |
| case REG_REG: |
| par_addr = (u32)&config->c_reg; |
| break; |
| case REG_TIMING: |
| par_addr = (u32)&config->c_timing; |
| break; |
| case REG_PERF: |
| par_addr = (u32)&config->c_perf; |
| break; |
| case REG_MAP: |
| par_addr = (u32)&config->c_map; |
| break; |
| case REGPHY_REG: |
| par_addr = (u32)&config->p_reg; |
| break; |
| case REGPHY_TIMING: |
| par_addr = (u32)&config->p_timing; |
| break; |
| case REG_DYN: |
| case REGPHY_DYN: |
| case REG_TYPE_NB: |
| par_addr = (u32)NULL; |
| break; |
| } |
| |
| return par_addr; |
| } |
| |
| int stm32mp1_dump_param(const struct stm32mp1_ddr_config *config, |
| const char *name) |
| { |
| unsigned int i, j; |
| const struct reg_desc *desc; |
| u32 par_addr; |
| enum base_type p_base; |
| enum reg_type type; |
| const char *p_name; |
| enum base_type filter = NONE_BASE; |
| int result = -EINVAL; |
| |
| if (name) { |
| if (strcmp(name, base_name[DDR_BASE]) == 0) |
| filter = DDR_BASE; |
| else if (strcmp(name, base_name[DDRPHY_BASE]) == 0) |
| filter = DDRPHY_BASE; |
| } |
| |
| for (i = 0; i < ARRAY_SIZE(ddr_registers); i++) { |
| par_addr = get_par_addr(config, i); |
| if (!par_addr) |
| continue; |
| p_base = ddr_registers[i].base; |
| p_name = ddr_registers[i].name; |
| if (!name || (filter == p_base || !strcmp(name, p_name))) { |
| result = 0; |
| desc = ddr_registers[i].desc; |
| printf("==%s.%s==\n", base_name[p_base], p_name); |
| for (j = 0; j < ddr_registers[i].size; j++) |
| stm32mp1_dump_param_desc(par_addr, &desc[j]); |
| } |
| } |
| if (result) { |
| desc = found_reg(name, &type); |
| if (desc) { |
| par_addr = get_par_addr(config, type); |
| if (par_addr) { |
| stm32mp1_dump_param_desc(par_addr, desc); |
| result = 0; |
| } |
| } |
| } |
| return result; |
| } |
| |
| void stm32mp1_edit_param(const struct stm32mp1_ddr_config *config, |
| char *name, char *string) |
| { |
| unsigned long *ptr, value; |
| enum reg_type type; |
| const struct reg_desc *desc; |
| u32 par_addr; |
| |
| desc = found_reg(name, &type); |
| if (!desc) { |
| printf("%s not found\n", name); |
| return; |
| } |
| if (strict_strtoul(string, 16, &value) < 0) { |
| printf("invalid value %s\n", string); |
| return; |
| } |
| par_addr = get_par_addr(config, type); |
| if (!par_addr) { |
| printf("no parameter %s\n", name); |
| return; |
| } |
| ptr = (unsigned long *)(par_addr + desc->par_offset); |
| writel(value, ptr); |
| printf("%s= 0x%08x\n", desc->name, readl(ptr)); |
| } |
| #endif |
| |
| __weak bool stm32mp1_ddr_interactive(void *priv, |
| enum stm32mp1_ddr_interact_step step, |
| const struct stm32mp1_ddr_config *config) |
| { |
| return false; |
| } |
| |
| #define INTERACTIVE(step)\ |
| stm32mp1_ddr_interactive(priv, step, config) |
| |
| static void ddrphy_idone_wait(struct stm32mp1_ddrphy *phy) |
| { |
| u32 pgsr; |
| int ret; |
| |
| ret = readl_poll_timeout(&phy->pgsr, pgsr, |
| pgsr & (DDRPHYC_PGSR_IDONE | |
| DDRPHYC_PGSR_DTERR | |
| DDRPHYC_PGSR_DTIERR | |
| DDRPHYC_PGSR_DFTERR | |
| DDRPHYC_PGSR_RVERR | |
| DDRPHYC_PGSR_RVEIRR), |
| 1000000); |
| log_debug("\n[0x%08x] pgsr = 0x%08x ret=%d\n", |
| (u32)&phy->pgsr, pgsr, ret); |
| } |
| |
| static void stm32mp1_ddrphy_init(struct stm32mp1_ddrphy *phy, u32 pir) |
| { |
| pir |= DDRPHYC_PIR_INIT; |
| writel(pir, &phy->pir); |
| log_debug("[0x%08x] pir = 0x%08x -> 0x%08x\n", |
| (u32)&phy->pir, pir, readl(&phy->pir)); |
| |
| /* need to wait 10 configuration clock before start polling */ |
| udelay(10); |
| |
| /* Wait DRAM initialization and Gate Training Evaluation complete */ |
| ddrphy_idone_wait(phy); |
| } |
| |
| /* start quasi dynamic register update */ |
| static void start_sw_done(struct stm32mp1_ddrctl *ctl) |
| { |
| clrbits_le32(&ctl->swctl, DDRCTRL_SWCTL_SW_DONE); |
| } |
| |
| /* wait quasi dynamic register update */ |
| static void wait_sw_done_ack(struct stm32mp1_ddrctl *ctl) |
| { |
| int ret; |
| u32 swstat; |
| |
| setbits_le32(&ctl->swctl, DDRCTRL_SWCTL_SW_DONE); |
| |
| ret = readl_poll_timeout(&ctl->swstat, swstat, |
| swstat & DDRCTRL_SWSTAT_SW_DONE_ACK, |
| 1000000); |
| if (ret) |
| panic("Timeout initialising DRAM : DDR->swstat = %x\n", |
| swstat); |
| |
| log_debug("[0x%08x] swstat = 0x%08x\n", (u32)&ctl->swstat, swstat); |
| } |
| |
| /* wait quasi dynamic register update */ |
| static void wait_operating_mode(struct ddr_info *priv, int mode) |
| { |
| u32 stat, val, mask, val2 = 0, mask2 = 0; |
| int ret; |
| |
| mask = DDRCTRL_STAT_OPERATING_MODE_MASK; |
| val = mode; |
| /* self-refresh due to software => check also STAT.selfref_type */ |
| if (mode == DDRCTRL_STAT_OPERATING_MODE_SR) { |
| mask |= DDRCTRL_STAT_SELFREF_TYPE_MASK; |
| val |= DDRCTRL_STAT_SELFREF_TYPE_SR; |
| } else if (mode == DDRCTRL_STAT_OPERATING_MODE_NORMAL) { |
| /* normal mode: handle also automatic self refresh */ |
| mask2 = DDRCTRL_STAT_OPERATING_MODE_MASK | |
| DDRCTRL_STAT_SELFREF_TYPE_MASK; |
| val2 = DDRCTRL_STAT_OPERATING_MODE_SR | |
| DDRCTRL_STAT_SELFREF_TYPE_ASR; |
| } |
| |
| ret = readl_poll_timeout(&priv->ctl->stat, stat, |
| ((stat & mask) == val) || |
| (mask2 && ((stat & mask2) == val2)), |
| 1000000); |
| |
| if (ret) |
| panic("Timeout DRAM : DDR->stat = %x\n", stat); |
| |
| log_debug("[0x%08x] stat = 0x%08x\n", (u32)&priv->ctl->stat, stat); |
| } |
| |
| static void stm32mp1_refresh_disable(struct stm32mp1_ddrctl *ctl) |
| { |
| start_sw_done(ctl); |
| /* quasi-dynamic register update*/ |
| setbits_le32(&ctl->rfshctl3, DDRCTRL_RFSHCTL3_DIS_AUTO_REFRESH); |
| clrbits_le32(&ctl->pwrctl, DDRCTRL_PWRCTL_POWERDOWN_EN | |
| DDRCTRL_PWRCTL_SELFREF_EN); |
| clrbits_le32(&ctl->dfimisc, DDRCTRL_DFIMISC_DFI_INIT_COMPLETE_EN); |
| wait_sw_done_ack(ctl); |
| } |
| |
| static void stm32mp1_refresh_restore(struct stm32mp1_ddrctl *ctl, |
| u32 rfshctl3, u32 pwrctl) |
| { |
| start_sw_done(ctl); |
| if (!(rfshctl3 & DDRCTRL_RFSHCTL3_DIS_AUTO_REFRESH)) |
| clrbits_le32(&ctl->rfshctl3, DDRCTRL_RFSHCTL3_DIS_AUTO_REFRESH); |
| if (pwrctl & DDRCTRL_PWRCTL_POWERDOWN_EN) |
| setbits_le32(&ctl->pwrctl, DDRCTRL_PWRCTL_POWERDOWN_EN); |
| if ((pwrctl & DDRCTRL_PWRCTL_SELFREF_EN)) |
| setbits_le32(&ctl->pwrctl, DDRCTRL_PWRCTL_SELFREF_EN); |
| setbits_le32(&ctl->dfimisc, DDRCTRL_DFIMISC_DFI_INIT_COMPLETE_EN); |
| wait_sw_done_ack(ctl); |
| } |
| |
| static void stm32mp1_asr_enable(struct ddr_info *priv) |
| { |
| struct stm32mp1_ddrctl *ctl = priv->ctl; |
| |
| clrsetbits_le32(priv->rcc + RCC_DDRITFCR, RCC_DDRITFCR_DDRCKMOD_MASK, |
| RCC_DDRITFCR_DDRCKMOD_ASR); |
| |
| start_sw_done(ctl); |
| |
| setbits_le32(&ctl->hwlpctl, DDRCTRL_HWLPCTL_HW_LP_EN); |
| writel(DDRCTRL_PWRTMG_POWERDOWN_TO_X32(0x10) | |
| DDRCTRL_PWRTMG_SELFREF_TO_X32(0x01), |
| &ctl->pwrtmg); |
| setbits_le32(&ctl->pwrctl, DDRCTRL_PWRCTL_EN_DFI_DRAM_CLK_DISABLE); |
| setbits_le32(&ctl->pwrctl, DDRCTRL_PWRCTL_SELFREF_EN); |
| |
| setbits_le32(&ctl->dfimisc, DDRCTRL_DFIMISC_DFI_INIT_COMPLETE_EN); |
| wait_sw_done_ack(ctl); |
| } |
| |
| /* board-specific DDR power initializations. */ |
| __weak int board_ddr_power_init(enum ddr_type ddr_type) |
| { |
| return 0; |
| } |
| |
| __maybe_unused |
| void stm32mp1_ddr_init(struct ddr_info *priv, |
| const struct stm32mp1_ddr_config *config) |
| { |
| u32 pir; |
| int ret = -EINVAL; |
| char bus_width; |
| |
| switch (config->c_reg.mstr & DDRCTRL_MSTR_DATA_BUS_WIDTH_MASK) { |
| case DDRCTRL_MSTR_DATA_BUS_WIDTH_QUARTER: |
| bus_width = 8; |
| break; |
| case DDRCTRL_MSTR_DATA_BUS_WIDTH_HALF: |
| bus_width = 16; |
| break; |
| default: |
| bus_width = 32; |
| break; |
| } |
| |
| |
| if (config->c_reg.mstr & DDRCTRL_MSTR_DDR3) |
| ret = board_ddr_power_init(STM32MP_DDR3); |
| else if (config->c_reg.mstr & DDRCTRL_MSTR_LPDDR2) { |
| if (bus_width == 32) |
| ret = board_ddr_power_init(STM32MP_LPDDR2_32); |
| else |
| ret = board_ddr_power_init(STM32MP_LPDDR2_16); |
| } else if (config->c_reg.mstr & DDRCTRL_MSTR_LPDDR3) { |
| if (bus_width == 32) |
| ret = board_ddr_power_init(STM32MP_LPDDR3_32); |
| else |
| ret = board_ddr_power_init(STM32MP_LPDDR3_16); |
| } |
| if (ret) |
| panic("ddr power init failed\n"); |
| |
| start: |
| log_debug("name = %s\n", config->info.name); |
| log_debug("speed = %d kHz\n", config->info.speed); |
| log_debug("size = 0x%x\n", config->info.size); |
| /* |
| * 1. Program the DWC_ddr_umctl2 registers |
| * 1.1 RESETS: presetn, core_ddrc_rstn, aresetn |
| */ |
| /* Assert All DDR part */ |
| setbits_le32(priv->rcc + RCC_DDRITFCR, RCC_DDRITFCR_DDRCAPBRST); |
| setbits_le32(priv->rcc + RCC_DDRITFCR, RCC_DDRITFCR_DDRCAXIRST); |
| setbits_le32(priv->rcc + RCC_DDRITFCR, RCC_DDRITFCR_DDRCORERST); |
| setbits_le32(priv->rcc + RCC_DDRITFCR, RCC_DDRITFCR_DPHYAPBRST); |
| setbits_le32(priv->rcc + RCC_DDRITFCR, RCC_DDRITFCR_DPHYRST); |
| setbits_le32(priv->rcc + RCC_DDRITFCR, RCC_DDRITFCR_DPHYCTLRST); |
| |
| /* 1.2. start CLOCK */ |
| if (stm32mp1_ddr_clk_enable(priv, config->info.speed)) |
| panic("invalid DRAM clock : %d kHz\n", |
| config->info.speed); |
| |
| /* 1.3. deassert reset */ |
| /* de-assert PHY rstn and ctl_rstn via DPHYRST and DPHYCTLRST */ |
| clrbits_le32(priv->rcc + RCC_DDRITFCR, RCC_DDRITFCR_DPHYRST); |
| clrbits_le32(priv->rcc + RCC_DDRITFCR, RCC_DDRITFCR_DPHYCTLRST); |
| /* De-assert presetn once the clocks are active |
| * and stable via DDRCAPBRST bit |
| */ |
| clrbits_le32(priv->rcc + RCC_DDRITFCR, RCC_DDRITFCR_DDRCAPBRST); |
| |
| /* 1.4. wait 128 cycles to permit initialization of end logic */ |
| udelay(2); |
| /* for PCLK = 133MHz => 1 us is enough, 2 to allow lower frequency */ |
| |
| if (INTERACTIVE(STEP_DDR_RESET)) |
| goto start; |
| |
| /* 1.5. initialize registers ddr_umctl2 */ |
| /* Stop uMCTL2 before PHY is ready */ |
| clrbits_le32(&priv->ctl->dfimisc, DDRCTRL_DFIMISC_DFI_INIT_COMPLETE_EN); |
| log_debug("[0x%08x] dfimisc = 0x%08x\n", |
| (u32)&priv->ctl->dfimisc, readl(&priv->ctl->dfimisc)); |
| |
| set_reg(priv, REG_REG, &config->c_reg); |
| set_reg(priv, REG_TIMING, &config->c_timing); |
| set_reg(priv, REG_MAP, &config->c_map); |
| |
| /* skip CTRL init, SDRAM init is done by PHY PUBL */ |
| clrsetbits_le32(&priv->ctl->init0, |
| DDRCTRL_INIT0_SKIP_DRAM_INIT_MASK, |
| DDRCTRL_INIT0_SKIP_DRAM_INIT_NORMAL); |
| |
| set_reg(priv, REG_PERF, &config->c_perf); |
| |
| if (INTERACTIVE(STEP_CTL_INIT)) |
| goto start; |
| |
| /* 2. deassert reset signal core_ddrc_rstn, aresetn and presetn */ |
| clrbits_le32(priv->rcc + RCC_DDRITFCR, RCC_DDRITFCR_DDRCORERST); |
| clrbits_le32(priv->rcc + RCC_DDRITFCR, RCC_DDRITFCR_DDRCAXIRST); |
| clrbits_le32(priv->rcc + RCC_DDRITFCR, RCC_DDRITFCR_DPHYAPBRST); |
| |
| /* 3. start PHY init by accessing relevant PUBL registers |
| * (DXGCR, DCR, PTR*, MR*, DTPR*) |
| */ |
| set_reg(priv, REGPHY_REG, &config->p_reg); |
| set_reg(priv, REGPHY_TIMING, &config->p_timing); |
| |
| if (INTERACTIVE(STEP_PHY_INIT)) |
| goto start; |
| |
| /* 4. Monitor PHY init status by polling PUBL register PGSR.IDONE |
| * Perform DDR PHY DRAM initialization and Gate Training Evaluation |
| */ |
| ddrphy_idone_wait(priv->phy); |
| |
| /* 5. Indicate to PUBL that controller performs SDRAM initialization |
| * by setting PIR.INIT and PIR CTLDINIT and pool PGSR.IDONE |
| * DRAM init is done by PHY, init0.skip_dram.init = 1 |
| */ |
| pir = DDRPHYC_PIR_DLLSRST | DDRPHYC_PIR_DLLLOCK | DDRPHYC_PIR_ZCAL | |
| DDRPHYC_PIR_ITMSRST | DDRPHYC_PIR_DRAMINIT | DDRPHYC_PIR_ICPC; |
| |
| if (config->c_reg.mstr & DDRCTRL_MSTR_DDR3) |
| pir |= DDRPHYC_PIR_DRAMRST; /* only for DDR3 */ |
| |
| stm32mp1_ddrphy_init(priv->phy, pir); |
| |
| /* 6. SET DFIMISC.dfi_init_complete_en to 1 */ |
| /* Enable quasi-dynamic register programming*/ |
| start_sw_done(priv->ctl); |
| setbits_le32(&priv->ctl->dfimisc, DDRCTRL_DFIMISC_DFI_INIT_COMPLETE_EN); |
| wait_sw_done_ack(priv->ctl); |
| |
| /* 7. Wait for DWC_ddr_umctl2 to move to normal operation mode |
| * by monitoring STAT.operating_mode signal |
| */ |
| /* wait uMCTL2 ready */ |
| |
| wait_operating_mode(priv, DDRCTRL_STAT_OPERATING_MODE_NORMAL); |
| |
| log_debug("DDR DQS training : "); |
| /* 8. Disable Auto refresh and power down by setting |
| * - RFSHCTL3.dis_au_refresh = 1 |
| * - PWRCTL.powerdown_en = 0 |
| * - DFIMISC.dfiinit_complete_en = 0 |
| */ |
| stm32mp1_refresh_disable(priv->ctl); |
| |
| /* 9. Program PUBL PGCR to enable refresh during training and rank to train |
| * not done => keep the programed value in PGCR |
| */ |
| |
| /* 10. configure PUBL PIR register to specify which training step to run */ |
| /* RVTRN is excuted only on LPDDR2/LPDDR3 */ |
| if (config->c_reg.mstr & DDRCTRL_MSTR_DDR3) |
| pir = DDRPHYC_PIR_QSTRN; |
| else |
| pir = DDRPHYC_PIR_QSTRN | DDRPHYC_PIR_RVTRN; |
| stm32mp1_ddrphy_init(priv->phy, pir); |
| |
| /* 11. monitor PUB PGSR.IDONE to poll cpmpletion of training sequence */ |
| ddrphy_idone_wait(priv->phy); |
| |
| /* 12. set back registers in step 8 to the orginal values if desidered */ |
| stm32mp1_refresh_restore(priv->ctl, config->c_reg.rfshctl3, |
| config->c_reg.pwrctl); |
| |
| /* Enable auto-self-refresh, which saves a bit of power at runtime. */ |
| stm32mp1_asr_enable(priv); |
| |
| /* enable uMCTL2 AXI port 0 and 1 */ |
| setbits_le32(&priv->ctl->pctrl_0, DDRCTRL_PCTRL_N_PORT_EN); |
| setbits_le32(&priv->ctl->pctrl_1, DDRCTRL_PCTRL_N_PORT_EN); |
| |
| if (INTERACTIVE(STEP_DDR_READY)) |
| goto start; |
| } |