| // SPDX-License-Identifier: BSD-3-Clause |
| /* |
| * Copyright (c) 2021 Qualcomm Innovation Center, Inc. All rights reserved. |
| */ |
| /dts-v1/; |
| |
| /* PM7250B is configured to use SID2/3 */ |
| #define PM7250B_SID 2 |
| #define PM7250B_SID1 3 |
| |
| #include "qcom-sdx65.dtsi" |
| #include <dt-bindings/regulator/qcom,rpmh-regulator.h> |
| #include <arm64/qcom/pmk8350.dtsi> |
| #include <arm64/qcom/pm7250b.dtsi> |
| #include "qcom-pmx65.dtsi" |
| |
| / { |
| model = "Qualcomm Technologies, Inc. SDX65 MTP"; |
| compatible = "qcom,sdx65-mtp", "qcom,sdx65"; |
| qcom,board-id = <0x2010008 0x302>; |
| |
| aliases { |
| serial0 = &blsp1_uart3; |
| }; |
| |
| chosen { |
| stdout-path = "serial0:115200n8"; |
| }; |
| |
| reserved-memory { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| mpss_dsm: memory@8c400000 { |
| no-map; |
| reg = <0x8c400000 0x3200000>; |
| }; |
| |
| ipa_fw_mem: memory@8fced000 { |
| no-map; |
| reg = <0x8fced000 0x10000>; |
| }; |
| |
| mpss_adsp_mem: memory@90800000 { |
| no-map; |
| reg = <0x90800000 0x10000000>; |
| }; |
| }; |
| |
| vph_pwr: vph-pwr-regulator { |
| compatible = "regulator-fixed"; |
| regulator-name = "vph_pwr"; |
| regulator-min-microvolt = <3700000>; |
| regulator-max-microvolt = <3700000>; |
| }; |
| |
| vreg_bob_3p3: pmx65_bob { |
| compatible = "regulator-fixed"; |
| regulator-name = "vreg_bob_3p3"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| |
| regulator-always-on; |
| regulator-boot-on; |
| |
| vin-supply = <&vph_pwr>; |
| }; |
| }; |
| |
| &apps_rsc { |
| regulators-0 { |
| compatible = "qcom,pmx65-rpmh-regulators"; |
| qcom,pmic-id = "b"; |
| |
| vdd-s1-supply = <&vph_pwr>; |
| vdd-s2-supply = <&vph_pwr>; |
| vdd-s3-supply = <&vph_pwr>; |
| vdd-s4-supply = <&vph_pwr>; |
| vdd-s5-supply = <&vph_pwr>; |
| vdd-s6-supply = <&vph_pwr>; |
| vdd-s7-supply = <&vph_pwr>; |
| vdd-s8-supply = <&vph_pwr>; |
| vdd-l1-supply = <&vreg_s2b_1p224>; |
| vdd-l2-l18-supply = <&vreg_s2b_1p224>; |
| vdd-l3-supply = <&vreg_s8b_0p824>; |
| vdd-l4-supply = <&vreg_s7b_0p936>; |
| vdd-l5-l6-l16-supply = <&vreg_s4b_1p824>; |
| vdd-l7-supply = <&vreg_s3b_0p776>; |
| vdd-l8-l9-supply = <&vreg_s8b_0p824>; |
| vdd-l10-supply = <&vreg_bob_3p3>; |
| vdd-l11-l13-supply = <&vreg_bob_3p3>; |
| vdd-l12-supply = <&vreg_s2b_1p224>; |
| vdd-l14-supply = <&vreg_s3b_0p776>; |
| vdd-l15-supply = <&vreg_s2b_1p224>; |
| vdd-l17-supply = <&vreg_s8b_0p824>; |
| vdd-l19-supply = <&vreg_s3b_0p776>; |
| vdd-l20-supply = <&vreg_s7b_0p936>; |
| vdd-l21-supply = <&vreg_s7b_0p936>; |
| |
| vreg_s2b_1p224: smps2 { |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1400000>; |
| }; |
| |
| vreg_s3b_0p776: smps3 { |
| regulator-min-microvolt = <500000>; |
| regulator-max-microvolt = <1040000>; |
| }; |
| |
| vreg_s4b_1p824: smps4 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <2024000>; |
| }; |
| |
| vreg_s7b_0p936: smps7 { |
| regulator-min-microvolt = <500000>; |
| regulator-max-microvolt = <1040000>; |
| }; |
| |
| vreg_s8b_0p824: smps8 { |
| regulator-min-microvolt = <304000>; |
| regulator-max-microvolt = <1300000>; |
| }; |
| |
| vreg_l1b_1p2: ldo1 { |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1200000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| ldo2 { |
| regulator-min-microvolt = <1128000>; |
| regulator-max-microvolt = <1128000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| ldo3 { |
| regulator-min-microvolt = <300000>; |
| regulator-max-microvolt = <960000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l4b_0p88: ldo4 { |
| regulator-min-microvolt = <880000>; |
| regulator-max-microvolt = <912000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l5b_1p8: ldo5 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| ldo6 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| ldo7 { |
| regulator-min-microvolt = <752000>; |
| regulator-max-microvolt = <752000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| ldo8 { |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <800000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| ldo9 { |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <800000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l10b_3p08: ldo10 { |
| regulator-min-microvolt = <3088000>; |
| regulator-max-microvolt = <3088000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| ldo11 { |
| regulator-min-microvolt = <1704000>; |
| regulator-max-microvolt = <2928000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| ldo12 { |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1200000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| ldo13 { |
| regulator-min-microvolt = <1704000>; |
| regulator-max-microvolt = <2928000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| ldo14 { |
| regulator-min-microvolt = <600000>; |
| regulator-max-microvolt = <800000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| ldo15 { |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1200000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| ldo16 { |
| regulator-min-microvolt = <1776000>; |
| regulator-max-microvolt = <1776000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| ldo17 { |
| regulator-min-microvolt = <300000>; |
| regulator-max-microvolt = <960000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| ldo19 { |
| regulator-min-microvolt = <752000>; |
| regulator-max-microvolt = <752000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| ldo20 { |
| regulator-min-microvolt = <912000>; |
| regulator-max-microvolt = <912000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| ldo21 { |
| regulator-min-microvolt = <912000>; |
| regulator-max-microvolt = <912000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| }; |
| }; |
| |
| &blsp1_uart3 { |
| status = "okay"; |
| }; |
| |
| &ipa { |
| qcom,gsi-loader = "skip"; |
| status = "okay"; |
| }; |
| |
| &pcie_ep { |
| pinctrl-0 = <&pcie_ep_clkreq_default |
| &pcie_ep_perst_default |
| &pcie_ep_wake_default>; |
| pinctrl-names = "default"; |
| |
| reset-gpios = <&tlmm 57 GPIO_ACTIVE_LOW>; |
| wake-gpios = <&tlmm 53 GPIO_ACTIVE_LOW>; |
| |
| status = "okay"; |
| }; |
| |
| &pcie_phy { |
| vdda-phy-supply = <&vreg_l1b_1p2>; |
| vdda-pll-supply = <&vreg_l4b_0p88>; |
| |
| status = "okay"; |
| }; |
| |
| &qpic_bam { |
| status = "okay"; |
| }; |
| |
| &qpic_nand { |
| status = "okay"; |
| |
| nand@0 { |
| reg = <0>; |
| |
| nand-ecc-strength = <4>; |
| nand-ecc-step-size = <512>; |
| nand-bus-width = <8>; |
| /* ico and efs2 partitions are secured */ |
| secure-regions = /bits/ 64 <0x500000 0x500000 |
| 0xa00000 0xb00000>; |
| }; |
| }; |
| |
| &remoteproc_mpss { |
| memory-region = <&mpss_adsp_mem>; |
| status = "okay"; |
| }; |
| |
| &tlmm { |
| pcie_ep_clkreq_default: pcie-ep-clkreq-default-state { |
| pins = "gpio56"; |
| function = "pcie_clkreq"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| |
| pcie_ep_perst_default: pcie-ep-perst-default-state { |
| pins = "gpio57"; |
| function = "gpio"; |
| drive-strength = <2>; |
| bias-pull-down; |
| }; |
| |
| pcie_ep_wake_default: pcie-ep-wake-default-state { |
| pins = "gpio53"; |
| function = "gpio"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| }; |
| |
| &usb { |
| status = "okay"; |
| }; |
| |
| &usb_dwc3 { |
| dr_mode = "peripheral"; |
| }; |
| |
| &usb_hsphy { |
| vdda-pll-supply = <&vreg_l4b_0p88>; |
| vdda33-supply = <&vreg_l10b_3p08>; |
| vdda18-supply = <&vreg_l5b_1p8>; |
| status = "okay"; |
| }; |
| |
| &usb_qmpphy { |
| vdda-phy-supply = <&vreg_l4b_0p88>; |
| vdda-pll-supply = <&vreg_l1b_1p2>; |
| status = "okay"; |
| }; |