Merge with /home/wd/git/u-boot/master
diff --git a/CHANGELOG b/CHANGELOG
index 82be4e3..9ed65bd 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,173 @@
Changes since U-Boot 1.1.4:
======================================================================
+* Several improvements to the new NAND subsystem:
+ - JFFS2 related commands implemented in mtd-utils style
+ - Support for bad blocks
+ - Bad block testing commands
+ - NAND lock commands
+ Please take a look at doc/README.nand for more details
+ Patch by Guido Classen, 10 Oct 2006
+
+* Define IH_CPU_AVR32
+ Make it possible to generate AVR32 uImage files with mkimage and
+ make cmd_bootm recognize them.
+ Patch by Haavard Skinnemoen, 22 Sep 2006
+
+* Fix buffer overflow problem in ft_build.c
+ Patch by Fredrik Roubert, 09 Oct 2006
+
+* Make bootp implementation RFC3046 compliant
+ Patch by Joakim Larsson, 27 Jun 2006
+
+* TQM5200: perform POST memory test only on STK52xx carrier board.
+ (and then only if PSC6_3 is read as "1" when booting).
+ Patch by Martin Krause, 21 Jun 2006
+
+* Move "ar" flags to config.mk to allow for silent "make -s"
+ Based on patch by Mike Frysinger, 20 Jun 2006
+
+* Coding style cleanup
+
+* Add support for EP82xxM boards
+ Patch by Aaron Sells, 20 Jun 2006
+
+* Fix comments in include/ppc440.h
+ Patch by Martin Hicks, 16 Jun 2006
+
+* Update for CAM5200 board:
+ - Map in a additional chip selects CS4 and CS5.
+ - Modify the port configration, configure six UARTs and no PCI,
+ ATA and USB.
+ - Add custom flash driver to handle specific byte swapping
+
+* Fix TLB setup for Ocotea board
+ Patch by Stefan Roese, 30 Sep 2006
+
+* Fix reset problem in sequoia sdram init code
+ Patch by Stefan Roese, 23 Sep 2006
+
+* Disable autoboot abort for FO300 when silent mode is enabled
+ (according to S1 switch setting).
+
+* Cleanup examples binaries
+
+* Add support for AMCC Rainier PPX440GRx eval board
+ Patch by Stefan Roese, 13 Sep 2006
+
+* Add NAND environment support for PPC440EPx Sequoia NAND boot config
+ Patch by Stefan Roese, 12 Sep 2006
+
+* Update NAND boot documentation
+ Patch by Stefan Roese, 12 Sep 2006
+
+* Fix alignment problem in "mtdparts" command
+
+* Add documentation on the latest build environment extensions to
+ the README file.
+
+* Remove dead code (i2o and dma) from cpu/mpc824x/drivers/ directory.
+
+* Fix LOG_DIR directory creation error.
+ Add support for automatic creation of BUILD_DIR directory.
+
+* Fix build problem cpu/ppc4xx/ndfc.c
+ Patch by Stefan Roese, 07 Sep 2006
+
+* Fix build problem with CPCI440
+ Patch by Stefan Roese, 07 Sep 2006
+
+* Change Yellowstone to use CFI write buffer
+ Patch by Stefan Roese, 07 Sep 2006
+
+* Add support for AMCC Sequoia PPC440EPx eval board
+ - Add support for PPC440EPx & PPC440GRx
+ - Add support for PPC440EP(x)/GR(x) NAND controller
+ in cpu/ppc4xx directory
+ - Add NAND boot functionality for Sequoia board,
+ please see doc/README.nand-boot-ppc440 for details
+ - This Sequoia NAND image doesn't support environment
+ in NAND for now. This will be added in a short while.
+ Patch by Stefan Roese, 07 Sep 2006
+
+* Fix mkimage -l bug with multifile images on 64bit platforms
+ Patch by David Updegraff, 06 Sep 2006
+
+* Fix build problems on sorcery board.
+
+* Fix coldfire build problems.
+ Patch by Marian Balakowicz, 01 Sep 2006
+
+* Add support for a saving build objects in a separate directory.
+ Modifications are based on the Linux kernel approach and support
+ two use cases:
+ 1) Add O= to the make command line 'make O=/tmp/build all'
+ 2) Set environement variable BUILD_DIR to point to the desired location
+ 'export BUILD_DIR=/tmp/build'
+ 'make'
+ The second approach can also be used with a MAKEALL script
+ 'export BUILD_DIR=/tmp/build'
+ './MAKEALL'
+ Command line 'O=' setting overrides the BUILD_DIR environent variable.
+ When none of the above methods is used the local build is performed
+ and the object files are placed in the source directory.
+
+* Remove the board/netstar/crcit binary from git repository.
+
+* Fix tools/updater build error.
+
+* Fix tools/easylogo build error.
+
+* Fixed problems on PRS200 board caused by adding splash screen on MCC200
+
+* Extended README entry on coding style
+
+* Added another example showing simple interrupt interception.
+
+* Added simple_strtoul(), getenv() and setenv() to the exported functions.
+ Also bumped up ABI version to reflect this change.
+
+* Added interrupt handling capabilities for mpc5xxx processors.
+ Also added Linux like BUG() macros.
+
+* Coding Style cleanup.
+ Patch by Stefano Babic, 31 Aug 2006
+
+* Add splashscreen support for MCC200 board.
+
+* Make the serial driver framework work with CONFIG_SERIAL_MULTI
+ enabled
+
+* PCIe endpoint support for AMCC Yucca 440SPe board
+ Patch by Tirumala R Marri, 26 Aug 2006
+
+* Improve DIMM detection for AMCC Yucca 440SPe board
+ Improved the memory DIMM detection for the Yucca 440SPe board for
+ the case where a memory DIMM is falsely detected as present.
+ This issue is seen on some AMCC Yucca 440SPe validation boards if
+ only one 512MB memory DIMM is installed, i.e. DIMM slot 0 is
+ populated and DIMM slot 1 is empty. In this case, U-Boot does
+ not correctly detect that there is only one DIMM memory module
+ installed and will falsely detect two DIMM memory modules are
+ present and therefore U-Boot will not calculate the correct amount
+ of total memory and u-boot will not booting up.
+ Patch by Adam Graham, 24 Aug 2006
+
+* Fix typo.
+
+* Code cleanup
+
+* Update for MCC200 / PRS200 boards:
+ - auto-adjust console device for Linux.
+ - fix typos.
+
+* Add a fix for a buggy USB device on the FO300 board.
+
+* Updates for MCC200 / PRS200 boards:
+ - support for configurations with SDRAM or DDR memory,
+ - support for highboot and lowboot
+ - adjusting environment definitions
+
* Add support for WTK FO300 board (TQM5200 based).
* Fix TQM834x hang.
diff --git a/CREDITS b/CREDITS
index 32d3060..3f7b510 100644
--- a/CREDITS
+++ b/CREDITS
@@ -386,6 +386,10 @@
E: r.schwebel@pengutronix.de
D: Support for csb226, logodl and innokom boards (PXA2xx)
+N: Aaron Sells
+E: sellsa@embeddedplanet.com
+D: Support for EP82xxM
+
N: Art Shipkowski
E: art@videon-central.com
D: Support for NetSilicon NS7520
diff --git a/MAINTAINERS b/MAINTAINERS
index e1baa42..4262719 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -285,6 +285,7 @@
ocotea PPC440GX
p3p440 PPC440GP
pcs440ep PPC440EP
+ sequoia PPC440EPx
sycamore PPC405GPr
walnut PPC405GP
yellowstone PPC440GR
@@ -318,6 +319,11 @@
MPC8266ADS MPC8266
+
+David Updegraff <dave@cray.com>
+
+ CRAYL1 PPC4xx
+
Josef Wagner <Wagner@Microsys.de>
CPC45 MPC8245
@@ -347,7 +353,6 @@
RPXClassic MPC8xx
RPXlite MPC8xx
- CRAYL1 PPC4xx
ERIC PPC4xx
MOUSSE MPC824x
diff --git a/MAKEALL b/MAKEALL
index 720ab03..e9c04a6 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -8,7 +8,17 @@
MAKE=make
fi
-[ -d LOG ] || mkdir LOG || exit 1
+if [ "${MAKEALL_LOGDIR}" ] ; then
+ LOG_DIR=${MAKEALL_LOGDIR}
+else
+ LOG_DIR="LOG"
+fi
+
+if [ ! "${BUILD_DIR}" ] ; then
+ BUILD_DIR="."
+fi
+
+[ -d ${LOG_DIR} ] || mkdir ${LOG_DIR} || exit 1
LIST=""
@@ -65,19 +75,20 @@
LIST_4xx=" \
ADCIOP AP1000 AR405 ASH405 \
- bubinga CANBT CMS700 CPCI2DP \
- CPCI405 CPCI4052 CPCI405AB CPCI405DT \
- CPCI440 CPCIISER4 CRAYL1 csb272 \
- csb472 DASA_SIM DP405 DU405 \
- ebony ERIC EXBITGEN G2000 \
- HH405 HUB405 JSE KAREF \
- luan METROBOX MIP405 MIP405T \
- ML2 ml300 ocotea OCRTC \
- ORSG p3p440 PCI405 pcs440ep \
- PIP405 PLU405 PMC405 PPChameleonEVB \
- sbc405 VOH405 VOM405 W7OLMC \
- W7OLMG walnut WUH405 XPEDITE1K \
- yellowstone yosemite yucca bamboo \
+ bamboo bubinga CANBT CMS700 \
+ CPCI2DP CPCI405 CPCI4052 CPCI405AB \
+ CPCI405DT CPCI440 CPCIISER4 CRAYL1 \
+ csb272 csb472 DASA_SIM DP405 \
+ DU405 ebony ERIC EXBITGEN \
+ G2000 HH405 HUB405 JSE \
+ KAREF luan METROBOX MIP405 \
+ MIP405T ML2 ml300 ocotea \
+ OCRTC ORSG p3p440 PCI405 \
+ pcs440ep PIP405 PLU405 PMC405 \
+ PPChameleonEVB sbc405 sequoia sequoia_nand \
+ VOH405 VOM405 W7OLMC W7OLMG \
+ walnut WUH405 XPEDITE1K yellowstone \
+ yosemite yucca bamboo \
"
#########################################################################
@@ -106,12 +117,12 @@
LIST_8260=" \
atc cogent_mpc8260 CPU86 CPU87 \
- ep8248 ep8260 gw8260 hymod \
- IPHASE4539 ISPAN MPC8260ADS MPC8266ADS \
- MPC8272ADS PM826 PM828 ppmc8260 \
- Rattler8248 RPXsuper rsdproto sacsng \
- sbc8260 SCM TQM8260_AC TQM8260_AD \
- TQM8260_AE ZPC1900 \
+ ep8248 ep8260 ep82xxm gw8260 \
+ hymod IPHASE4539 ISPAN MPC8260ADS \
+ MPC8266ADS MPC8272ADS PM826 PM828 \
+ ppmc8260 Rattler8248 RPXsuper rsdproto \
+ sacsng sbc8260 SCM TQM8260_AC \
+ TQM8260_AD TQM8260_AE ZPC1900 \
"
#########################################################################
@@ -303,8 +314,12 @@
${MAKE} distclean >/dev/null
${MAKE} ${target}_config
- ${MAKE} ${JOBS} all 2>&1 >LOG/$target.MAKELOG | tee LOG/$target.ERR
- ${CROSS_COMPILE:-ppc_8xx-}size u-boot | tee -a LOG/$target.MAKELOG
+
+ ${MAKE} ${JOBS} all 2>&1 >${LOG_DIR}/$target.MAKELOG \
+ | tee ${LOG_DIR}/$target.ERR
+
+ ${CROSS_COMPILE:-ppc_8xx-}size ${BUILD_DIR}/u-boot \
+ | tee -a ${LOG_DIR}/$target.MAKELOG
}
#-----------------------------------------------------------------------
diff --git a/Makefile b/Makefile
index a78f35b..8ef0097 100644
--- a/Makefile
+++ b/Makefile
@@ -26,7 +26,7 @@
SUBLEVEL = 4
EXTRAVERSION =
U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
-VERSION_FILE = include/version_autogenerated.h
+VERSION_FILE = $(obj)include/version_autogenerated.h
HOSTARCH := $(shell uname -m | \
sed -e s/i.86/i386/ \
@@ -45,14 +45,78 @@
VENDOR=
#########################################################################
+#
+# U-boot build supports producing a object files to the separate external
+# directory. Two use cases are supported:
+#
+# 1) Add O= to the make command line
+# 'make O=/tmp/build all'
+#
+# 2) Set environement variable BUILD_DIR to point to the desired location
+# 'export BUILD_DIR=/tmp/build'
+# 'make'
+#
+# The second approach can also be used with a MAKEALL script
+# 'export BUILD_DIR=/tmp/build'
+# './MAKEALL'
+#
+# Command line 'O=' setting overrides BUILD_DIR environent variable.
+#
+# When none of the above methods is used the local build is performed and
+# the object files are placed in the source directory.
+#
-TOPDIR := $(shell if [ "$$PWD" != "" ]; then echo $$PWD; else pwd; fi)
-export TOPDIR
+ifdef O
+ifeq ("$(origin O)", "command line")
+BUILD_DIR := $(O)
+endif
+endif
+
+ifneq ($(BUILD_DIR),)
+saved-output := $(BUILD_DIR)
+
+# Attempt to create a output directory.
+$(shell [ -d ${BUILD_DIR} ] || mkdir -p ${BUILD_DIR})
+
+# Verify if it was successful.
+BUILD_DIR := $(shell cd $(BUILD_DIR) && /bin/pwd)
+$(if $(BUILD_DIR),,$(error output directory "$(saved-output)" does not exist))
+endif # ifneq ($(BUILD_DIR),)
-ifeq (include/config.mk,$(wildcard include/config.mk))
+OBJTREE := $(if $(BUILD_DIR),$(BUILD_DIR),$(CURDIR))
+SRCTREE := $(CURDIR)
+TOPDIR := $(SRCTREE)
+LNDIR := $(OBJTREE)
+export TOPDIR SRCTREE OBJTREE
+
+MKCONFIG := $(SRCTREE)/mkconfig
+export MKCONFIG
+
+ifneq ($(OBJTREE),$(SRCTREE))
+REMOTE_BUILD := 1
+export REMOTE_BUILD
+endif
+
+# $(obj) and (src) are defined in config.mk but here in main Makefile
+# we also need them before config.mk is included which is the case for
+# some targets like unconfig, clean, clobber, distclean, etc.
+ifneq ($(OBJTREE),$(SRCTREE))
+obj := $(OBJTREE)/
+src := $(SRCTREE)/
+else
+obj :=
+src :=
+endif
+export obj src
+
+#########################################################################
+
+ifeq ($(OBJTREE)/include/config.mk,$(wildcard $(OBJTREE)/include/config.mk))
+
# load ARCH, BOARD, and CPU configuration
-include include/config.mk
+include $(OBJTREE)/include/config.mk
export ARCH CPU BOARD VENDOR SOC
+
ifndef CROSS_COMPILE
ifeq ($(HOSTARCH),ppc)
CROSS_COMPILE =
@@ -96,7 +160,6 @@
# load other configuration
include $(TOPDIR)/config.mk
-
#########################################################################
# U-Boot objects....order is important (i.e. start must be first)
@@ -119,6 +182,8 @@
OBJS += cpu/$(CPU)/cplbhdlr.o cpu/$(CPU)/cplbmgr.o cpu/$(CPU)/flush.o
endif
+OBJS := $(addprefix $(obj),$(OBJS))
+
LIBS = lib_generic/libgeneric.a
LIBS += board/$(BOARDDIR)/lib$(BOARD).a
LIBS += cpu/$(CPU)/lib$(CPU).a
@@ -139,12 +204,13 @@
LIBS += post/libpost.a post/cpu/libcpu.a
LIBS += common/libcommon.a
LIBS += $(BOARDLIBS)
+
+LIBS := $(addprefix $(obj),$(LIBS))
.PHONY : $(LIBS)
# Add GCC lib
PLATFORM_LIBS += -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc
-
# The "tools" are needed early, so put this first
# Don't include stuff already done in $(LIBS)
SUBDIRS = tools \
@@ -153,44 +219,61 @@
post/cpu
.PHONY : $(SUBDIRS)
+ifeq ($(CONFIG_NAND_U_BOOT),y)
+NAND_SPL = nand_spl
+U_BOOT_NAND = $(obj)u-boot-nand.bin
+endif
+
+__OBJS := $(subst $(obj),,$(OBJS))
+__LIBS := $(subst $(obj),,$(LIBS))
+
#########################################################################
#########################################################################
-ALL = u-boot.srec u-boot.bin System.map
+ALL = $(obj)u-boot.srec $(obj)u-boot.bin $(obj)System.map $(U_BOOT_NAND)
all: $(ALL)
-u-boot.hex: u-boot
+$(obj)u-boot.hex: $(obj)u-boot
$(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@
-u-boot.srec: u-boot
+$(obj)u-boot.srec: $(obj)u-boot
$(OBJCOPY) ${OBJCFLAGS} -O srec $< $@
-u-boot.bin: u-boot
+$(obj)u-boot.bin: $(obj)u-boot
$(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
-u-boot.img: u-boot.bin
+$(obj)u-boot.img: $(obj)u-boot.bin
./tools/mkimage -A $(ARCH) -T firmware -C none \
-a $(TEXT_BASE) -e 0 \
-n $(shell sed -n -e 's/.*U_BOOT_VERSION//p' $(VERSION_FILE) | \
sed -e 's/"[ ]*$$/ for $(BOARD) board"/') \
-d $< $@
-u-boot.dis: u-boot
+$(obj)u-boot.dis: $(obj)u-boot
$(OBJDUMP) -d $< > $@
-u-boot: depend version $(SUBDIRS) $(OBJS) $(LIBS) $(LDSCRIPT)
+$(obj)u-boot: depend version $(SUBDIRS) $(OBJS) $(LIBS) $(LDSCRIPT)
UNDEF_SYM=`$(OBJDUMP) -x $(LIBS) |sed -n -e 's/.*\(__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\
- $(LD) $(LDFLAGS) $$UNDEF_SYM $(OBJS) \
- --start-group $(LIBS) --end-group $(PLATFORM_LIBS) \
+ cd $(LNDIR) && $(LD) $(LDFLAGS) $$UNDEF_SYM $(__OBJS) \
+ --start-group $(__LIBS) --end-group $(PLATFORM_LIBS) \
-Map u-boot.map -o u-boot
+$(OBJS):
+ $(MAKE) -C cpu/$(CPU) $(if $(REMOTE_BUILD),$@,$(notdir $@))
+
$(LIBS):
- $(MAKE) -C `dirname $@`
+ $(MAKE) -C $(dir $(subst $(obj),,$@))
$(SUBDIRS):
$(MAKE) -C $@ all
+$(NAND_SPL): version
+ $(MAKE) -C nand_spl all
+
+$(U_BOOT_NAND): $(NAND_SPL) $(obj)u-boot.bin
+ cat nand_spl/u-boot-spl-16k.bin $(obj)u-boot.bin > $(obj)u-boot-nand.bin
+
version:
@echo -n "#define U_BOOT_VERSION \"U-Boot " > $(VERSION_FILE); \
echo -n "$(U_BOOT_VERSION)" >> $(VERSION_FILE); \
@@ -199,33 +282,42 @@
echo "\"" >> $(VERSION_FILE)
gdbtools:
- $(MAKE) -C tools/gdb || exit 1
+ $(MAKE) -C tools/gdb all || exit 1
+
+updater:
+ $(MAKE) -C tools/updater all || exit 1
+
+env:
+ $(MAKE) -C tools/env all || exit 1
depend dep:
- @for dir in $(SUBDIRS) ; do $(MAKE) -C $$dir .depend ; done
+ for dir in $(SUBDIRS) ; do $(MAKE) -C $$dir _depend ; done
-tags:
- ctags -w `find $(SUBDIRS) include \
+tags ctags:
+ ctags -w -o $(OBJTREE)/ctags `find $(SUBDIRS) include \
lib_generic board/$(BOARDDIR) cpu/$(CPU) lib_$(ARCH) \
fs/cramfs fs/fat fs/fdos fs/jffs2 \
net disk rtc dtt drivers drivers/sk98lin common \
\( -name CVS -prune \) -o \( -name '*.[ch]' -print \)`
etags:
- etags -a `find $(SUBDIRS) include \
+ etags -a -o $(OBJTREE)/etags `find $(SUBDIRS) include \
lib_generic board/$(BOARDDIR) cpu/$(CPU) lib_$(ARCH) \
fs/cramfs fs/fat fs/fdos fs/jffs2 \
net disk rtc dtt drivers drivers/sk98lin common \
\( -name CVS -prune \) -o \( -name '*.[ch]' -print \)`
-System.map: u-boot
+$(obj)System.map: $(obj)u-boot
@$(NM) $< | \
grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
- sort > System.map
+ sort > $(obj)System.map
#########################################################################
else
-all install u-boot u-boot.srec depend dep:
+all $(obj)u-boot.hex $(obj)u-boot.srec $(obj)u-boot.bin \
+$(obj)u-boot.img $(obj)u-boot.dis $(obj)u-boot \
+$(SUBDIRS) version gdbtools updater env depend \
+dep tags ctags etags $(obj)System.map:
@echo "System not configured - see README" >&2
@ exit 1
endif
@@ -233,7 +325,8 @@
#########################################################################
unconfig:
- @rm -f include/config.h include/config.mk board/*/config.tmp
+ @rm -f $(obj)include/config.h $(obj)include/config.mk \
+ $(obj)board/*/config.tmp $(obj)board/*/*/config.tmp
#========================================================================
# PowerPC
@@ -244,29 +337,29 @@
#########################################################################
canmb_config: unconfig
- @./mkconfig -a canmb ppc mpc5xxx canmb
+ @$(MKCONFIG) -a canmb ppc mpc5xxx canmb
cmi_mpc5xx_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc5xx cmi
+ @$(MKCONFIG) $(@:_config=) ppc mpc5xx cmi
PATI_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc5xx pati mpl
+ @$(MKCONFIG) $(@:_config=) ppc mpc5xx pati mpl
#########################################################################
## MPC5xxx Systems
#########################################################################
aev_config: unconfig
- @./mkconfig -a aev ppc mpc5xxx tqm5200
+ @$(MKCONFIG) -a aev ppc mpc5xxx tqm5200
BC3450_config: unconfig
- @./mkconfig -a BC3450 ppc mpc5xxx bc3450
+ @$(MKCONFIG) -a BC3450 ppc mpc5xxx bc3450
cpci5200_config: unconfig
- @./mkconfig -a cpci5200 ppc mpc5xxx cpci5200 esd
+ @$(MKCONFIG) -a cpci5200 ppc mpc5xxx cpci5200 esd
hmi1001_config: unconfig
- @./mkconfig hmi1001 ppc mpc5xxx hmi1001
+ @$(MKCONFIG) hmi1001 ppc mpc5xxx hmi1001
Lite5200_config \
Lite5200_LOWBOOT_config \
@@ -278,144 +371,176 @@
icecube_5200_DDR_LOWBOOT_config \
icecube_5200_DDR_LOWBOOT08_config \
icecube_5100_config: unconfig
- @ >include/config.h
+ @mkdir -p $(obj)include
+ @mkdir -p $(obj)board/icecube
+ @ >$(obj)include/config.h
@[ -z "$(findstring LOWBOOT_,$@)" ] || \
{ if [ "$(findstring DDR,$@)" ] ; \
- then echo "TEXT_BASE = 0xFF800000" >board/icecube/config.tmp ; \
- else echo "TEXT_BASE = 0xFF000000" >board/icecube/config.tmp ; \
+ then echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp ; \
+ else echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \
fi ; \
echo "... with LOWBOOT configuration" ; \
}
@[ -z "$(findstring LOWBOOT08,$@)" ] || \
- { echo "TEXT_BASE = 0xFF800000" >board/icecube/config.tmp ; \
+ { echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp ; \
echo "... with 8 MB flash only" ; \
echo "... with LOWBOOT configuration" ; \
}
@[ -z "$(findstring DDR,$@)" ] || \
- { echo "#define CONFIG_MPC5200_DDR" >>include/config.h ; \
+ { echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h ; \
echo "... DDR memory revision" ; \
}
@[ -z "$(findstring 5200,$@)" ] || \
- { echo "#define CONFIG_MPC5200" >>include/config.h ; \
+ { echo "#define CONFIG_MPC5200" >>$(obj)include/config.h ; \
echo "... with MPC5200 processor" ; \
}
@[ -z "$(findstring 5100,$@)" ] || \
- { echo "#define CONFIG_MGT5100" >>include/config.h ; \
+ { echo "#define CONFIG_MGT5100" >>$(obj)include/config.h ; \
echo "... with MGT5100 processor" ; \
}
- @./mkconfig -a IceCube ppc mpc5xxx icecube
+ @$(MKCONFIG) -a IceCube ppc mpc5xxx icecube
inka4x0_config: unconfig
- @./mkconfig inka4x0 ppc mpc5xxx inka4x0
+ @$(MKCONFIG) inka4x0 ppc mpc5xxx inka4x0
lite5200b_config \
lite5200b_LOWBOOT_config: unconfig
- @ >include/config.h
- @ echo "#define CONFIG_MPC5200_DDR" >>include/config.h
+ @mkdir -p $(obj)include
+ @mkdir -p $(obj)board/icecube
+ @ >$(obj)include/config.h
+ @ echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h
@ echo "... DDR memory revision"
- @ echo "#define CONFIG_MPC5200" >>include/config.h
- @ echo "#define CONFIG_LITE5200B" >>include/config.h
+ @ echo "#define CONFIG_MPC5200" >>$(obj)include/config.h
+ @ echo "#define CONFIG_LITE5200B" >>$(obj)include/config.h
@[ -z "$(findstring LOWBOOT_,$@)" ] || \
- { echo "TEXT_BASE = 0xFF000000" >board/icecube/config.tmp ; \
+ { echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \
echo "... with LOWBOOT configuration" ; \
}
@ echo "... with MPC5200B processor"
- @./mkconfig -a IceCube ppc mpc5xxx icecube
+ @$(MKCONFIG) -a IceCube ppc mpc5xxx icecube
mcc200_config \
-mcc200_SDRAM \
-mcc200_highboot \
-mcc200_COM12 \
-mcc200_highboot_SDRAM: unconfig
- @ >include/config.h
+mcc200_SDRAM_config \
+mcc200_highboot_config \
+mcc200_COM12_config \
+mcc200_COM12_SDRAM_config \
+mcc200_COM12_highboot_config \
+mcc200_COM12_highboot_SDRAM_config \
+mcc200_highboot_SDRAM_config \
+prs200_config \
+prs200_DDR_config \
+prs200_highboot_config \
+prs200_highboot_DDR_config: unconfig
+ @mkdir -p $(obj)include
+ @mkdir -p $(obj)board/mcc200
+ @ >$(obj)include/config.h
@[ -n "$(findstring highboot,$@)" ] || \
{ echo "... with lowboot configuration" ; \
}
@[ -z "$(findstring highboot,$@)" ] || \
- { echo "TEXT_BASE = 0xFFF00000" >board/mcc200/config.tmp ; \
+ { echo "TEXT_BASE = 0xFFF00000" >$(obj)board/mcc200/config.tmp ; \
echo "... with highboot configuration" ; \
}
@[ -n "$(findstring _SDRAM,$@)" ] || \
- { echo "... with DDR" ; \
+ { if [ -n "$(findstring mcc200,$@)" ]; \
+ then \
+ echo "... with DDR" ; \
+ else \
+ if [ -n "$(findstring _DDR,$@)" ];\
+ then \
+ echo "... with DDR" ; \
+ else \
+ echo "#define CONFIG_MCC200_SDRAM" >>$(obj)include/config.h ;\
+ echo "... with SDRAM" ; \
+ fi; \
+ fi; \
}
@[ -z "$(findstring _SDRAM,$@)" ] || \
- { echo "#define CONFIG_MCC200_SDRAM" >>include/config.h ; \
+ { echo "#define CONFIG_MCC200_SDRAM" >>$(obj)include/config.h ; \
echo "... with SDRAM" ; \
}
@[ -z "$(findstring COM12,$@)" ] || \
- { echo "#define CONFIG_CONSOLE_COM12" >>include/config.h ; \
+ { echo "#define CONFIG_CONSOLE_COM12" >>$(obj)include/config.h ; \
echo "... with console on COM12" ; \
}
- @./mkconfig -a mcc200 ppc mpc5xxx mcc200
+ @[ -z "$(findstring prs200,$@)" ] || \
+ { echo "#define CONFIG_PRS200" >>$(obj)include/config.h ;\
+ }
+ @$(MKCONFIG) -n $@ -a mcc200 ppc mpc5xxx mcc200
o2dnt_config:
- @./mkconfig o2dnt ppc mpc5xxx o2dnt
+ @$(MKCONFIG) o2dnt ppc mpc5xxx o2dnt
pf5200_config: unconfig
- @./mkconfig pf5200 ppc mpc5xxx pf5200 esd
+ @$(MKCONFIG) pf5200 ppc mpc5xxx pf5200 esd
PM520_config \
PM520_DDR_config \
PM520_ROMBOOT_config \
PM520_ROMBOOT_DDR_config: unconfig
- @ >include/config.h
+ @mkdir -p $(obj)include
+ @ >$(obj)include/config.h
@[ -z "$(findstring DDR,$@)" ] || \
- { echo "#define CONFIG_MPC5200_DDR" >>include/config.h ; \
+ { echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h ; \
echo "... DDR memory revision" ; \
}
@[ -z "$(findstring ROMBOOT,$@)" ] || \
- { echo "#define CONFIG_BOOT_ROM" >>include/config.h ; \
+ { echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \
echo "... booting from 8-bit flash" ; \
}
- @./mkconfig -a PM520 ppc mpc5xxx pm520
+ @$(MKCONFIG) -a PM520 ppc mpc5xxx pm520
smmaco4_config: unconfig
- @./mkconfig -a smmaco4 ppc mpc5xxx tqm5200
+ @$(MKCONFIG) -a smmaco4 ppc mpc5xxx tqm5200
spieval_config: unconfig
- @./mkconfig -a spieval ppc mpc5xxx tqm5200
+ @$(MKCONFIG) -a spieval ppc mpc5xxx tqm5200
TB5200_B_config \
TB5200_config: unconfig
+ @mkdir -p $(obj)include
@[ -z "$(findstring _B,$@)" ] || \
- { echo "#define CONFIG_TQM5200_B" >>include/config.h ; \
+ { echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \
echo "... with MPC5200B processor" ; \
}
- @./mkconfig -n $@ -a TB5200 ppc mpc5xxx tqm5200
+ @$(MKCONFIG) -n $@ -a TB5200 ppc mpc5xxx tqm5200
MINI5200_config \
EVAL5200_config \
TOP5200_config: unconfig
- @ echo "#define CONFIG_$(@:_config=) 1" >include/config.h
- @./mkconfig -n $@ -a TOP5200 ppc mpc5xxx top5200 emk
+ @mkdir -p $(obj)include
+ @ echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
+ @$(MKCONFIG) -n $@ -a TOP5200 ppc mpc5xxx top5200 emk
Total5100_config \
Total5200_config \
Total5200_lowboot_config \
Total5200_Rev2_config \
Total5200_Rev2_lowboot_config: unconfig
- @ >include/config.h
+ @mkdir -p $(obj)include
+ @mkdir -p $(obj)board/total5200
+ @ >$(obj)include/config.h
@[ -z "$(findstring 5100,$@)" ] || \
- { echo "#define CONFIG_MGT5100" >>include/config.h ; \
+ { echo "#define CONFIG_MGT5100" >>$(obj)include/config.h ; \
echo "... with MGT5100 processor" ; \
}
@[ -z "$(findstring 5200,$@)" ] || \
- { echo "#define CONFIG_MPC5200" >>include/config.h ; \
+ { echo "#define CONFIG_MPC5200" >>$(obj)include/config.h ; \
echo "... with MPC5200 processor" ; \
}
@[ -n "$(findstring Rev,$@)" ] || \
- { echo "#define CONFIG_TOTAL5200_REV 1" >>include/config.h ; \
+ { echo "#define CONFIG_TOTAL5200_REV 1" >>$(obj)include/config.h ; \
echo "... revision 1 board" ; \
}
@[ -z "$(findstring Rev2_,$@)" ] || \
- { echo "#define CONFIG_TOTAL5200_REV 2" >>include/config.h ; \
+ { echo "#define CONFIG_TOTAL5200_REV 2" >>$(obj)include/config.h ; \
echo "... revision 2 board" ; \
}
@[ -z "$(findstring lowboot_,$@)" ] || \
- { echo "TEXT_BASE = 0xFE000000" >board/total5200/config.tmp ; \
+ { echo "TEXT_BASE = 0xFE000000" >$(obj)board/total5200/config.tmp ; \
echo "... with lowboot configuration" ; \
}
- @./mkconfig -a Total5200 ppc mpc5xxx total5200
+ @$(MKCONFIG) -a Total5200 ppc mpc5xxx total5200
cam5200_config \
fo300_config \
@@ -426,36 +551,38 @@
TQM5200_B_HIGHBOOT_config \
TQM5200_config \
TQM5200_STK100_config: unconfig
- @ >include/config.h
+ @mkdir -p $(obj)include
+ @mkdir -p $(obj)board/tqm5200
+ @ >$(obj)include/config.h
@[ -z "$(findstring cam5200,$@)" ] || \
- { echo "#define CONFIG_CAM5200" >>include/config.h ; \
- echo "#define CONFIG_TQM5200S" >>include/config.h ; \
- echo "#define CONFIG_TQM5200_B" >>include/config.h ; \
+ { echo "#define CONFIG_CAM5200" >>$(obj)include/config.h ; \
+ echo "#define CONFIG_TQM5200S" >>$(obj)include/config.h ; \
+ echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \
echo "... TQM5200S on Cam5200" ; \
}
@[ -z "$(findstring fo300,$@)" ] || \
- { echo "#define CONFIG_FO300" >>include/config.h ; \
+ { echo "#define CONFIG_FO300" >>$(obj)include/config.h ; \
echo "... TQM5200 on FO300" ; \
}
@[ -z "$(findstring MiniFAP,$@)" ] || \
- { echo "#define CONFIG_MINIFAP" >>include/config.h ; \
+ { echo "#define CONFIG_MINIFAP" >>$(obj)include/config.h ; \
echo "... TQM5200_AC on MiniFAP" ; \
}
@[ -z "$(findstring STK100,$@)" ] || \
- { echo "#define CONFIG_STK52XX_REV100" >>include/config.h ; \
+ { echo "#define CONFIG_STK52XX_REV100" >>$(obj)include/config.h ; \
echo "... on a STK52XX.100 base board" ; \
}
@[ -z "$(findstring TQM5200_B,$@)" ] || \
- { echo "#define CONFIG_TQM5200_B" >>include/config.h ; \
+ { echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \
}
@[ -z "$(findstring TQM5200S,$@)" ] || \
- { echo "#define CONFIG_TQM5200S" >>include/config.h ; \
- echo "#define CONFIG_TQM5200_B" >>include/config.h ; \
+ { echo "#define CONFIG_TQM5200S" >>$(obj)include/config.h ; \
+ echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \
}
@[ -z "$(findstring HIGHBOOT,$@)" ] || \
- { echo "TEXT_BASE = 0xFFF00000" >board/tqm5200/config.tmp ; \
+ { echo "TEXT_BASE = 0xFFF00000" >$(obj)board/tqm5200/config.tmp ; \
}
- @./mkconfig -n $@ -a TQM5200 ppc mpc5xxx tqm5200
+ @$(MKCONFIG) -n $@ -a TQM5200 ppc mpc5xxx tqm5200
#########################################################################
## MPC8xx Systems
@@ -465,9 +592,10 @@
Adder87x_config \
AdderII_config \
: unconfig
+ @mkdir -p $(obj)include
$(if $(findstring AdderII,$@), \
- @echo "#define CONFIG_MPC852T" > include/config.h)
- @./mkconfig -a Adder ppc mpc8xx adder
+ @echo "#define CONFIG_MPC852T" > $(obj)include/config.h)
+ @$(MKCONFIG) -a Adder ppc mpc8xx adder
ADS860_config \
FADS823_config \
@@ -475,154 +603,160 @@
MPC86xADS_config \
MPC885ADS_config \
FADS860T_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx fads
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx fads
AMX860_config : unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx amx860 westel
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx amx860 westel
c2mon_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx c2mon
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx c2mon
CCM_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx CCM siemens
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx CCM siemens
cogent_mpc8xx_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx cogent
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx cogent
ELPT860_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx elpt860 LEOX
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx elpt860 LEOX
EP88x_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx ep88x
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx ep88x
ESTEEM192E_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx esteem192e
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx esteem192e
ETX094_config : unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx etx094
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx etx094
FLAGADM_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx flagadm
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx flagadm
xtract_GEN860T = $(subst _SC,,$(subst _config,,$1))
GEN860T_SC_config \
GEN860T_config: unconfig
- @ >include/config.h
+ @mkdir -p $(obj)include
+ @ >$(obj)include/config.h
@[ -z "$(findstring _SC,$@)" ] || \
- { echo "#define CONFIG_SC" >>include/config.h ; \
+ { echo "#define CONFIG_SC" >>$(obj)include/config.h ; \
echo "With reduced H/W feature set (SC)..." ; \
}
- @./mkconfig -a $(call xtract_GEN860T,$@) ppc mpc8xx gen860t
+ @$(MKCONFIG) -a $(call xtract_GEN860T,$@) ppc mpc8xx gen860t
GENIETV_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx genietv
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx genietv
GTH_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx gth
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx gth
hermes_config : unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx hermes
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx hermes
HMI10_config : unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx tqm8xx
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx tqm8xx
IAD210_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx IAD210 siemens
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx IAD210 siemens
xtract_ICU862 = $(subst _100MHz,,$(subst _config,,$1))
ICU862_100MHz_config \
ICU862_config: unconfig
- @ >include/config.h
+ @mkdir -p $(obj)include
+ @ >$(obj)include/config.h
@[ -z "$(findstring _100MHz,$@)" ] || \
- { echo "#define CONFIG_100MHz" >>include/config.h ; \
+ { echo "#define CONFIG_100MHz" >>$(obj)include/config.h ; \
echo "... with 100MHz system clock" ; \
}
- @./mkconfig -a $(call xtract_ICU862,$@) ppc mpc8xx icu862
+ @$(MKCONFIG) -a $(call xtract_ICU862,$@) ppc mpc8xx icu862
IP860_config : unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx ip860
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx ip860
IVML24_256_config \
IVML24_128_config \
IVML24_config: unconfig
- @ >include/config.h
+ @mkdir -p $(obj)include
+ @ >$(obj)include/config.h
@[ -z "$(findstring IVML24_config,$@)" ] || \
- { echo "#define CONFIG_IVML24_16M" >>include/config.h ; \
+ { echo "#define CONFIG_IVML24_16M" >>$(obj)include/config.h ; \
}
@[ -z "$(findstring IVML24_128_config,$@)" ] || \
- { echo "#define CONFIG_IVML24_32M" >>include/config.h ; \
+ { echo "#define CONFIG_IVML24_32M" >>$(obj)include/config.h ; \
}
@[ -z "$(findstring IVML24_256_config,$@)" ] || \
- { echo "#define CONFIG_IVML24_64M" >>include/config.h ; \
+ { echo "#define CONFIG_IVML24_64M" >>$(obj)include/config.h ; \
}
- @./mkconfig -a IVML24 ppc mpc8xx ivm
+ @$(MKCONFIG) -a IVML24 ppc mpc8xx ivm
IVMS8_256_config \
IVMS8_128_config \
IVMS8_config: unconfig
- @ >include/config.h
+ @mkdir -p $(obj)include
+ @ >$(obj)include/config.h
@[ -z "$(findstring IVMS8_config,$@)" ] || \
- { echo "#define CONFIG_IVMS8_16M" >>include/config.h ; \
+ { echo "#define CONFIG_IVMS8_16M" >>$(obj)include/config.h ; \
}
@[ -z "$(findstring IVMS8_128_config,$@)" ] || \
- { echo "#define CONFIG_IVMS8_32M" >>include/config.h ; \
+ { echo "#define CONFIG_IVMS8_32M" >>$(obj)include/config.h ; \
}
@[ -z "$(findstring IVMS8_256_config,$@)" ] || \
- { echo "#define CONFIG_IVMS8_64M" >>include/config.h ; \
+ { echo "#define CONFIG_IVMS8_64M" >>$(obj)include/config.h ; \
}
- @./mkconfig -a IVMS8 ppc mpc8xx ivm
+ @$(MKCONFIG) -a IVMS8 ppc mpc8xx ivm
KUP4K_config : unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx kup4k kup
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx kup4k kup
KUP4X_config : unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx kup4x kup
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx kup4x kup
LANTEC_config : unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx lantec
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx lantec
lwmon_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx lwmon
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx lwmon
MBX_config \
MBX860T_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx mbx8xx
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx mbx8xx
MHPC_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx mhpc eltec
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx mhpc eltec
MVS1_config : unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx mvs1
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx mvs1
xtract_NETVIA = $(subst _V2,,$(subst _config,,$1))
NETVIA_V2_config \
NETVIA_config: unconfig
- @ >include/config.h
+ @mkdir -p $(obj)include
+ @ >$(obj)include/config.h
@[ -z "$(findstring NETVIA_config,$@)" ] || \
- { echo "#define CONFIG_NETVIA_VERSION 1" >>include/config.h ; \
+ { echo "#define CONFIG_NETVIA_VERSION 1" >>$(obj)include/config.h ; \
echo "... Version 1" ; \
}
@[ -z "$(findstring NETVIA_V2_config,$@)" ] || \
- { echo "#define CONFIG_NETVIA_VERSION 2" >>include/config.h ; \
+ { echo "#define CONFIG_NETVIA_VERSION 2" >>$(obj)include/config.h ; \
echo "... Version 2" ; \
}
- @./mkconfig -a $(call xtract_NETVIA,$@) ppc mpc8xx netvia
+ @$(MKCONFIG) -a $(call xtract_NETVIA,$@) ppc mpc8xx netvia
xtract_NETPHONE = $(subst _V2,,$(subst _config,,$1))
NETPHONE_V2_config \
NETPHONE_config: unconfig
- @ >include/config.h
+ @mkdir -p $(obj)include
+ @ >$(obj)include/config.h
@[ -z "$(findstring NETPHONE_config,$@)" ] || \
- { echo "#define CONFIG_NETPHONE_VERSION 1" >>include/config.h ; \
+ { echo "#define CONFIG_NETPHONE_VERSION 1" >>$(obj)include/config.h ; \
}
@[ -z "$(findstring NETPHONE_V2_config,$@)" ] || \
- { echo "#define CONFIG_NETPHONE_VERSION 2" >>include/config.h ; \
+ { echo "#define CONFIG_NETPHONE_VERSION 2" >>$(obj)include/config.h ; \
}
- @./mkconfig -a $(call xtract_NETPHONE,$@) ppc mpc8xx netphone
+ @$(MKCONFIG) -a $(call xtract_NETPHONE,$@) ppc mpc8xx netphone
xtract_NETTA = $(subst _SWAPHOOK,,$(subst _6412,,$(subst _ISDN,,$(subst _config,,$1))))
@@ -634,85 +768,88 @@
NETTA_ISDN_config \
NETTA_6412_config \
NETTA_config: unconfig
- @ >include/config.h
+ @mkdir -p $(obj)include
+ @ >$(obj)include/config.h
@[ -z "$(findstring ISDN_,$@)" ] || \
- { echo "#define CONFIG_NETTA_ISDN 1" >>include/config.h ; \
+ { echo "#define CONFIG_NETTA_ISDN 1" >>$(obj)include/config.h ; \
}
@[ -n "$(findstring ISDN_,$@)" ] || \
- { echo "#undef CONFIG_NETTA_ISDN" >>include/config.h ; \
+ { echo "#undef CONFIG_NETTA_ISDN" >>$(obj)include/config.h ; \
}
@[ -z "$(findstring 6412_,$@)" ] || \
- { echo "#define CONFIG_NETTA_6412 1" >>include/config.h ; \
+ { echo "#define CONFIG_NETTA_6412 1" >>$(obj)include/config.h ; \
}
@[ -n "$(findstring 6412_,$@)" ] || \
- { echo "#undef CONFIG_NETTA_6412" >>include/config.h ; \
+ { echo "#undef CONFIG_NETTA_6412" >>$(obj)include/config.h ; \
}
@[ -z "$(findstring SWAPHOOK_,$@)" ] || \
- { echo "#define CONFIG_NETTA_SWAPHOOK 1" >>include/config.h ; \
+ { echo "#define CONFIG_NETTA_SWAPHOOK 1" >>$(obj)include/config.h ; \
}
@[ -n "$(findstring SWAPHOOK_,$@)" ] || \
- { echo "#undef CONFIG_NETTA_SWAPHOOK" >>include/config.h ; \
+ { echo "#undef CONFIG_NETTA_SWAPHOOK" >>$(obj)include/config.h ; \
}
- @./mkconfig -a $(call xtract_NETTA,$@) ppc mpc8xx netta
+ @$(MKCONFIG) -a $(call xtract_NETTA,$@) ppc mpc8xx netta
xtract_NETTA2 = $(subst _V2,,$(subst _config,,$1))
NETTA2_V2_config \
NETTA2_config: unconfig
- @ >include/config.h
+ @mkdir -p $(obj)include
+ @ >$(obj)include/config.h
@[ -z "$(findstring NETTA2_config,$@)" ] || \
- { echo "#define CONFIG_NETTA2_VERSION 1" >>include/config.h ; \
+ { echo "#define CONFIG_NETTA2_VERSION 1" >>$(obj)include/config.h ; \
}
@[ -z "$(findstring NETTA2_V2_config,$@)" ] || \
- { echo "#define CONFIG_NETTA2_VERSION 2" >>include/config.h ; \
+ { echo "#define CONFIG_NETTA2_VERSION 2" >>$(obj)include/config.h ; \
}
- @./mkconfig -a $(call xtract_NETTA2,$@) ppc mpc8xx netta2
+ @$(MKCONFIG) -a $(call xtract_NETTA2,$@) ppc mpc8xx netta2
NC650_Rev1_config \
NC650_Rev2_config \
CP850_config: unconfig
- @ >include/config.h
+ @mkdir -p $(obj)include
+ @ >$(obj)include/config.h
@[ -z "$(findstring CP850,$@)" ] || \
- { echo "#define CONFIG_CP850 1" >>include/config.h ; \
- echo "#define CONFIG_IDS852_REV2 1" >>include/config.h ; \
+ { echo "#define CONFIG_CP850 1" >>$(obj)include/config.h ; \
+ echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \
}
@[ -z "$(findstring Rev1,$@)" ] || \
- { echo "#define CONFIG_IDS852_REV1 1" >>include/config.h ; \
+ { echo "#define CONFIG_IDS852_REV1 1" >>$(obj)include/config.h ; \
}
@[ -z "$(findstring Rev2,$@)" ] || \
- { echo "#define CONFIG_IDS852_REV2 1" >>include/config.h ; \
+ { echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \
}
- @./mkconfig -a NC650 ppc mpc8xx nc650
+ @$(MKCONFIG) -a NC650 ppc mpc8xx nc650
NX823_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx nx823
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx nx823
pcu_e_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx pcu_e siemens
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx pcu_e siemens
QS850_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx qs850 snmc
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx qs850 snmc
QS823_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx qs850 snmc
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx qs850 snmc
QS860T_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx qs860t snmc
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx qs860t snmc
quantum_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx quantum
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx quantum
R360MPI_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx r360mpi
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx r360mpi
RBC823_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx rbc823
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx rbc823
RPXClassic_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx RPXClassic
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx RPXClassic
RPXlite_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx RPXlite
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx RPXlite
RPXlite_DW_64_config \
RPXlite_DW_LCD_config \
@@ -722,55 +859,56 @@
RPXlite_DW_NVRAM_LCD_config \
RPXlite_DW_NVRAM_64_LCD_config \
RPXlite_DW_config: unconfig
- @ >include/config.h
+ @mkdir -p $(obj)include
+ @ >$(obj)include/config.h
@[ -z "$(findstring _64,$@)" ] || \
- { echo "#define RPXlite_64MHz" >>include/config.h ; \
+ { echo "#define RPXlite_64MHz" >>$(obj)include/config.h ; \
echo "... with 64MHz system clock ..."; \
}
@[ -z "$(findstring _LCD,$@)" ] || \
- { echo "#define CONFIG_LCD" >>include/config.h ; \
- echo "#define CONFIG_NEC_NL6448BC20" >>include/config.h ; \
+ { echo "#define CONFIG_LCD" >>$(obj)include/config.h ; \
+ echo "#define CONFIG_NEC_NL6448BC20" >>$(obj)include/config.h ; \
echo "... with LCD display ..."; \
}
@[ -z "$(findstring _NVRAM,$@)" ] || \
- { echo "#define CFG_ENV_IS_IN_NVRAM" >>include/config.h ; \
+ { echo "#define CFG_ENV_IS_IN_NVRAM" >>$(obj)include/config.h ; \
echo "... with ENV in NVRAM ..."; \
}
- @./mkconfig -a RPXlite_DW ppc mpc8xx RPXlite_dw
+ @$(MKCONFIG) -a RPXlite_DW ppc mpc8xx RPXlite_dw
rmu_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx rmu
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx rmu
RRvision_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx RRvision
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx RRvision
RRvision_LCD_config: unconfig
- @echo "#define CONFIG_LCD" >include/config.h
- @echo "#define CONFIG_SHARP_LQ104V7DS01" >>include/config.h
- @./mkconfig -a RRvision ppc mpc8xx RRvision
+ @mkdir -p $(obj)include
+ @echo "#define CONFIG_LCD" >$(obj)include/config.h
+ @echo "#define CONFIG_SHARP_LQ104V7DS01" >>$(obj)include/config.h
+ @$(MKCONFIG) -a RRvision ppc mpc8xx RRvision
SM850_config : unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx tqm8xx
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx tqm8xx
spc1920_config:
- @./mkconfig $(@:_config=) ppc mpc8xx spc1920
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx spc1920
SPD823TS_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx spd8xx
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx spd8xx
stxxtc_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx stxxtc
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx stxxtc
svm_sc8xx_config: unconfig
- @ >include/config.h
- @./mkconfig $(@:_config=) ppc mpc8xx svm_sc8xx
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx svm_sc8xx
SXNI855T_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx sixnet
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx sixnet
# EMK MPC8xx based modules
TOP860_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx top860 emk
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx top860 emk
# Play some tricks for configuration selection
# Only 855 and 860 boards may come with FEC
@@ -794,31 +932,35 @@
TQM866M_config \
TQM885D_config \
virtlab2_config: unconfig
- @ >include/config.h
+ @mkdir -p $(obj)include
+ @ >$(obj)include/config.h
@[ -z "$(findstring _LCD,$@)" ] || \
- { echo "#define CONFIG_LCD" >>include/config.h ; \
- echo "#define CONFIG_NEC_NL6448BC20" >>include/config.h ; \
+ { echo "#define CONFIG_LCD" >>$(obj)include/config.h ; \
+ echo "#define CONFIG_NEC_NL6448BC20" >>$(obj)include/config.h ; \
echo "... with LCD display" ; \
}
- @./mkconfig -a $(call xtract_8xx,$@) ppc mpc8xx tqm8xx
+ @$(MKCONFIG) -a $(call xtract_8xx,$@) ppc mpc8xx tqm8xx
TTTech_config: unconfig
- @echo "#define CONFIG_LCD" >include/config.h
- @echo "#define CONFIG_SHARP_LQ104V7DS01" >>include/config.h
- @./mkconfig -a TQM823L ppc mpc8xx tqm8xx
+ @mkdir -p $(obj)include
+ @echo "#define CONFIG_LCD" >$(obj)include/config.h
+ @echo "#define CONFIG_SHARP_LQ104V7DS01" >>$(obj)include/config.h
+ @$(MKCONFIG) -a TQM823L ppc mpc8xx tqm8xx
uc100_config : unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx uc100
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx uc100
v37_config: unconfig
- @echo "#define CONFIG_LCD" >include/config.h
- @echo "#define CONFIG_SHARP_LQ084V1DG21" >>include/config.h
- @./mkconfig $(@:_config=) ppc mpc8xx v37
+ @mkdir -p $(obj)include
+ @echo "#define CONFIG_LCD" >$(obj)include/config.h
+ @echo "#define CONFIG_SHARP_LQ084V1DG21" >>$(obj)include/config.h
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx v37
wtk_config: unconfig
- @echo "#define CONFIG_LCD" >include/config.h
- @echo "#define CONFIG_SHARP_LQ065T9DR51U" >>include/config.h
- @./mkconfig -a TQM823L ppc mpc8xx tqm8xx
+ @mkdir -p $(obj)include
+ @echo "#define CONFIG_LCD" >$(obj)include/config.h
+ @echo "#define CONFIG_SHARP_LQ065T9DR51U" >>$(obj)include/config.h
+ @$(MKCONFIG) -a TQM823L ppc mpc8xx tqm8xx
#########################################################################
## PPC4xx Systems
@@ -826,146 +968,148 @@
xtract_4xx = $(subst _25,,$(subst _33,,$(subst _BA,,$(subst _ME,,$(subst _HI,,$(subst _config,,$1))))))
ADCIOP_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx adciop esd
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx adciop esd
AP1000_config:unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx ap1000 amirix
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx ap1000 amirix
APC405_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx apc405 esd
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx apc405 esd
AR405_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx ar405 esd
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx ar405 esd
ASH405_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx ash405 esd
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx ash405 esd
bamboo_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx bamboo amcc
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx bamboo amcc
bubinga_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx bubinga amcc
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx bubinga amcc
CANBT_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx canbt esd
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx canbt esd
CATcenter_config \
CATcenter_25_config \
CATcenter_33_config: unconfig
- @ echo "/* CATcenter uses PPChameleon Model ME */" > include/config.h
- @ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >> include/config.h
+ @mkdir -p $(obj)include
+ @ echo "/* CATcenter uses PPChameleon Model ME */" > $(obj)include/config.h
+ @ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >> $(obj)include/config.h
@[ -z "$(findstring _25,$@)" ] || \
- { echo "#define CONFIG_PPCHAMELEON_CLK_25" >>include/config.h ; \
+ { echo "#define CONFIG_PPCHAMELEON_CLK_25" >> $(obj)include/config.h ; \
echo "SysClk = 25MHz" ; \
}
@[ -z "$(findstring _33,$@)" ] || \
- { echo "#define CONFIG_PPCHAMELEON_CLK_33" >>include/config.h ; \
+ { echo "#define CONFIG_PPCHAMELEON_CLK_33" >> $(obj)include/config.h ; \
echo "SysClk = 33MHz" ; \
}
- @./mkconfig -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave
+ @$(MKCONFIG) -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave
CPCI2DP_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx cpci2dp esd
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci2dp esd
CPCI405_config \
CPCI4052_config \
CPCI405DT_config \
CPCI405AB_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx cpci405 esd
- @echo "BOARD_REVISION = $(@:_config=)" >>include/config.mk
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci405 esd
+ @echo "BOARD_REVISION = $(@:_config=)" >> $(obj)include/config.mk
CPCI440_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx cpci440 esd
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci440 esd
CPCIISER4_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx cpciiser4 esd
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpciiser4 esd
CRAYL1_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx L1 cray
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx L1 cray
csb272_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx csb272
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx csb272
csb472_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx csb472
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx csb472
DASA_SIM_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx dasa_sim esd
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx dasa_sim esd
DP405_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx dp405 esd
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx dp405 esd
DU405_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx du405 esd
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx du405 esd
ebony_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx ebony amcc
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx ebony amcc
ERIC_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx eric
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx eric
EXBITGEN_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx exbitgen
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx exbitgen
G2000_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx g2000
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx g2000
HH405_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx hh405 esd
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx hh405 esd
HUB405_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx hub405 esd
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx hub405 esd
JSE_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx jse
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx jse
KAREF_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx karef sandburst
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx karef sandburst
luan_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx luan amcc
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx luan amcc
METROBOX_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx metrobox sandburst
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx metrobox sandburst
MIP405_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx mip405 mpl
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx mip405 mpl
MIP405T_config: unconfig
- @echo "#define CONFIG_MIP405T" >include/config.h
+ @mkdir -p $(obj)include
+ @echo "#define CONFIG_MIP405T" >$(obj)include/config.h
@echo "Enable subset config for MIP405T"
- @./mkconfig -a MIP405 ppc ppc4xx mip405 mpl
+ @$(MKCONFIG) -a MIP405 ppc ppc4xx mip405 mpl
ML2_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx ml2
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx ml2
ml300_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx ml300 xilinx
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx ml300 xilinx
ocotea_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx ocotea amcc
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx ocotea amcc
OCRTC_config \
ORSG_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx ocrtc esd
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx ocrtc esd
p3p440_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx p3p440 prodrive
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx p3p440 prodrive
PCI405_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx pci405 esd
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx pci405 esd
pcs440ep_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx pcs440ep
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx pcs440ep
PIP405_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx pip405 mpl
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx pip405 mpl
PLU405_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx plu405 esd
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx plu405 esd
PMC405_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx pmc405 esd
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc405 esd
PPChameleonEVB_config \
PPChameleonEVB_BA_25_config \
@@ -974,66 +1118,93 @@
PPChameleonEVB_BA_33_config \
PPChameleonEVB_ME_33_config \
PPChameleonEVB_HI_33_config: unconfig
- @ >include/config.h
+ @mkdir -p $(obj)include
+ @ >$(obj)include/config.h
@[ -z "$(findstring EVB_BA,$@)" ] || \
- { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 0" >>include/config.h ; \
+ { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 0" >>$(obj)include/config.h ; \
echo "... BASIC model" ; \
}
@[ -z "$(findstring EVB_ME,$@)" ] || \
- { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >>include/config.h ; \
+ { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >>$(obj)include/config.h ; \
echo "... MEDIUM model" ; \
}
@[ -z "$(findstring EVB_HI,$@)" ] || \
- { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 2" >>include/config.h ; \
+ { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 2" >>$(obj)include/config.h ; \
echo "... HIGH-END model" ; \
}
@[ -z "$(findstring _25,$@)" ] || \
- { echo "#define CONFIG_PPCHAMELEON_CLK_25" >>include/config.h ; \
+ { echo "#define CONFIG_PPCHAMELEON_CLK_25" >>$(obj)include/config.h ; \
echo "SysClk = 25MHz" ; \
}
@[ -z "$(findstring _33,$@)" ] || \
- { echo "#define CONFIG_PPCHAMELEON_CLK_33" >>include/config.h ; \
+ { echo "#define CONFIG_PPCHAMELEON_CLK_33" >>$(obj)include/config.h ; \
echo "SysClk = 33MHz" ; \
}
- @./mkconfig -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave
+ @$(MKCONFIG) -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave
+
+rainier_config: unconfig
+ @echo "#define CONFIG_RAINIER" > include/config.h
+ @echo "Configuring for rainier board as subset of sequoia..."
+ @$(MKCONFIG) -a sequoia ppc ppc4xx sequoia amcc
+
+rainier_nand_config: unconfig
+ @echo "#define CONFIG_RAINIER" > include/config.h
+ @echo "Configuring for rainier board as subset of sequoia..."
+ @ln -s board/amcc/sequoia/Makefile nand_spl/Makefile
+ @echo "#define CONFIG_NAND_U_BOOT" >> include/config.h
+ @echo "Compile NAND boot image for sequoia"
+ @$(MKCONFIG) -a sequoia ppc ppc4xx sequoia amcc
+ @echo "TEXT_BASE = 0x01000000" >board/amcc/sequoia/config.tmp
+ @echo "CONFIG_NAND_U_BOOT = y" >> include/config.mk
sbc405_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx sbc405
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx sbc405
+
+sequoia_config: unconfig
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx sequoia amcc
+
+sequoia_nand_config: unconfig
+ @ln -s board/amcc/sequoia/Makefile nand_spl/Makefile
+ @echo "#define CONFIG_NAND_U_BOOT" >include/config.h
+ @echo "Compile NAND boot image for sequoia"
+ @$(MKCONFIG) -a sequoia ppc ppc4xx sequoia amcc
+ @echo "TEXT_BASE = 0x01000000" >board/amcc/sequoia/config.tmp
+ @echo "CONFIG_NAND_U_BOOT = y" >> include/config.mk
sycamore_config: unconfig
@echo "Configuring for sycamore board as subset of walnut..."
- @./mkconfig -a walnut ppc ppc4xx walnut amcc
+ @$(MKCONFIG) -a walnut ppc ppc4xx walnut amcc
VOH405_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx voh405 esd
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx voh405 esd
VOM405_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx vom405 esd
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx vom405 esd
CMS700_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx cms700 esd
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx cms700 esd
W7OLMC_config \
W7OLMG_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx w7o
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx w7o
walnut_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx walnut amcc
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx walnut amcc
WUH405_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx wuh405 esd
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx wuh405 esd
XPEDITE1K_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx xpedite1k
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx xpedite1k
yosemite_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx yosemite amcc
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx yosemite amcc
yellowstone_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx yellowstone amcc
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx yellowstone amcc
yucca_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx yucca amcc
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx yucca amcc
#########################################################################
## MPC8220 Systems
@@ -1041,10 +1212,10 @@
Alaska8220_config \
Yukon8220_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8220 alaska
+ @$(MKCONFIG) $(@:_config=) ppc mpc8220 alaska
sorcery_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8220 sorcery
+ @$(MKCONFIG) $(@:_config=) ppc mpc8220 sorcery
#########################################################################
## MPC824x Systems
@@ -1052,18 +1223,18 @@
xtract_82xx = $(subst _BIGFLASH,,$(subst _ROMBOOT,,$(subst _L2,,$(subst _266MHz,,$(subst _300MHz,,$(subst _config,,$1))))))
A3000_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc824x a3000
+ @$(MKCONFIG) $(@:_config=) ppc mpc824x a3000
barco_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc824x barco
+ @$(MKCONFIG) $(@:_config=) ppc mpc824x barco
BMW_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc824x bmw
+ @$(MKCONFIG) $(@:_config=) ppc mpc824x bmw
CPC45_config \
CPC45_ROMBOOT_config: unconfig
- @./mkconfig $(call xtract_82xx,$@) ppc mpc824x cpc45
- @cd ./include ; \
+ @$(MKCONFIG) $(call xtract_82xx,$@) ppc mpc824x cpc45
+ @cd $(obj)include ; \
if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
echo "CONFIG_BOOT_ROM = y" >> config.mk ; \
echo "... booting from 8-bit flash" ; \
@@ -1074,64 +1245,64 @@
echo "export CONFIG_BOOT_ROM" >> config.mk;
CU824_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc824x cu824
+ @$(MKCONFIG) $(@:_config=) ppc mpc824x cu824
debris_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc824x debris etin
+ @$(MKCONFIG) $(@:_config=) ppc mpc824x debris etin
eXalion_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc824x eXalion
+ @$(MKCONFIG) $(@:_config=) ppc mpc824x eXalion
HIDDEN_DRAGON_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc824x hidden_dragon
+ @$(MKCONFIG) $(@:_config=) ppc mpc824x hidden_dragon
kvme080_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc824x kvme080 etin
+ @$(MKCONFIG) $(@:_config=) ppc mpc824x kvme080 etin
MOUSSE_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc824x mousse
+ @$(MKCONFIG) $(@:_config=) ppc mpc824x mousse
MUSENKI_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc824x musenki
+ @$(MKCONFIG) $(@:_config=) ppc mpc824x musenki
MVBLUE_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc824x mvblue
+ @$(MKCONFIG) $(@:_config=) ppc mpc824x mvblue
OXC_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc824x oxc
+ @$(MKCONFIG) $(@:_config=) ppc mpc824x oxc
PN62_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc824x pn62
+ @$(MKCONFIG) $(@:_config=) ppc mpc824x pn62
Sandpoint8240_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc824x sandpoint
+ @$(MKCONFIG) $(@:_config=) ppc mpc824x sandpoint
Sandpoint8245_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc824x sandpoint
+ @$(MKCONFIG) $(@:_config=) ppc mpc824x sandpoint
sbc8240_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc824x sbc8240
+ @$(MKCONFIG) $(@:_config=) ppc mpc824x sbc8240
SL8245_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc824x sl8245
+ @$(MKCONFIG) $(@:_config=) ppc mpc824x sl8245
utx8245_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc824x utx8245
+ @$(MKCONFIG) $(@:_config=) ppc mpc824x utx8245
#########################################################################
## MPC8260 Systems
#########################################################################
atc_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8260 atc
+ @$(MKCONFIG) $(@:_config=) ppc mpc8260 atc
cogent_mpc8260_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8260 cogent
+ @$(MKCONFIG) $(@:_config=) ppc mpc8260 cogent
CPU86_config \
CPU86_ROMBOOT_config: unconfig
- @./mkconfig $(call xtract_82xx,$@) ppc mpc8260 cpu86
- @cd ./include ; \
+ @$(MKCONFIG) $(call xtract_82xx,$@) ppc mpc8260 cpu86
+ @cd $(obj)include ; \
if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
echo "CONFIG_BOOT_ROM = y" >> config.mk ; \
echo "... booting from 8-bit flash" ; \
@@ -1143,8 +1314,8 @@
CPU87_config \
CPU87_ROMBOOT_config: unconfig
- @./mkconfig $(call xtract_82xx,$@) ppc mpc8260 cpu87
- @cd ./include ; \
+ @$(MKCONFIG) $(call xtract_82xx,$@) ppc mpc8260 cpu87
+ @cd $(obj)include ; \
if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
echo "CONFIG_BOOT_ROM = y" >> config.mk ; \
echo "... booting from 8-bit flash" ; \
@@ -1156,29 +1327,33 @@
ep8248_config \
ep8248E_config : unconfig
- @./mkconfig ep8248 ppc mpc8260 ep8248
+ @$(MKCONFIG) ep8248 ppc mpc8260 ep8248
ep8260_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8260 ep8260
+ @$(MKCONFIG) $(@:_config=) ppc mpc8260 ep8260
+
+ep82xxm_config: unconfig
+ @./mkconfig $(@:_config=) ppc mpc8260 ep82xxm
gw8260_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8260 gw8260
+ @$(MKCONFIG) $(@:_config=) ppc mpc8260 gw8260
hymod_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8260 hymod
+ @$(MKCONFIG) $(@:_config=) ppc mpc8260 hymod
IDS8247_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8260 ids8247
+ @$(MKCONFIG) $(@:_config=) ppc mpc8260 ids8247
IPHASE4539_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8260 iphase4539
+ @$(MKCONFIG) $(@:_config=) ppc mpc8260 iphase4539
ISPAN_config \
ISPAN_REVB_config: unconfig
+ @mkdir -p $(obj)include
@if [ "$(findstring _REVB_,$@)" ] ; then \
- echo "#define CFG_REV_B" > include/config.h ; \
+ echo "#define CFG_REV_B" > $(obj)include/config.h ; \
fi
- @./mkconfig -a ISPAN ppc mpc8260 ispan
+ @$(MKCONFIG) -a ISPAN ppc mpc8260 ispan
MPC8260ADS_config \
MPC8260ADS_lowboot_config \
@@ -1197,21 +1372,23 @@
PQ2FADS-ZU_66MHz_config \
PQ2FADS-ZU_66MHz_lowboot_config \
: unconfig
+ @mkdir -p $(obj)include
+ @mkdir -p $(obj)board/mpc8260ads
$(if $(findstring PQ2FADS,$@), \
- @echo "#define CONFIG_ADSTYPE CFG_PQ2FADS" > include/config.h, \
- @echo "#define CONFIG_ADSTYPE CFG_"$(subst MPC,,$(word 1,$(subst _, ,$@))) > include/config.h)
+ @echo "#define CONFIG_ADSTYPE CFG_PQ2FADS" > $(obj)include/config.h, \
+ @echo "#define CONFIG_ADSTYPE CFG_"$(subst MPC,,$(word 1,$(subst _, ,$@))) > $(obj)include/config.h)
$(if $(findstring MHz,$@), \
- @echo "#define CONFIG_8260_CLKIN" $(subst MHz,,$(word 2,$(subst _, ,$@)))"000000" >> include/config.h, \
+ @echo "#define CONFIG_8260_CLKIN" $(subst MHz,,$(word 2,$(subst _, ,$@)))"000000" >> $(obj)include/config.h, \
$(if $(findstring VR,$@), \
- @echo "#define CONFIG_8260_CLKIN 66000000" >> include/config.h))
+ @echo "#define CONFIG_8260_CLKIN 66000000" >> $(obj)include/config.h))
@[ -z "$(findstring lowboot_,$@)" ] || \
- { echo "TEXT_BASE = 0xFF800000" >board/mpc8260ads/config.tmp ; \
+ { echo "TEXT_BASE = 0xFF800000" >$(obj)board/mpc8260ads/config.tmp ; \
echo "... with lowboot configuration" ; \
}
- @./mkconfig -a MPC8260ADS ppc mpc8260 mpc8260ads
+ @$(MKCONFIG) -a MPC8260ADS ppc mpc8260 mpc8260ads
MPC8266ADS_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8260 mpc8266ads
+ @$(MKCONFIG) $(@:_config=) ppc mpc8260 mpc8266ads
# PM825/PM826 default configuration: small (= 8 MB) Flash / boot from 64-bit flash
PM825_config \
@@ -1222,71 +1399,76 @@
PM826_ROMBOOT_config \
PM826_BIGFLASH_config \
PM826_ROMBOOT_BIGFLASH_config: unconfig
+ @mkdir -p $(obj)include
+ @mkdir -p $(obj)board/pm826
@if [ "$(findstring PM825_,$@)" ] ; then \
- echo "#define CONFIG_PCI" >include/config.h ; \
+ echo "#define CONFIG_PCI" >$(obj)include/config.h ; \
else \
- >include/config.h ; \
+ >$(obj)include/config.h ; \
fi
@if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
echo "... booting from 8-bit flash" ; \
- echo "#define CONFIG_BOOT_ROM" >>include/config.h ; \
- echo "TEXT_BASE = 0xFF800000" >board/pm826/config.tmp ; \
+ echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \
+ echo "TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \
if [ "$(findstring _BIGFLASH_,$@)" ] ; then \
echo "... with 32 MB Flash" ; \
- echo "#define CONFIG_FLASH_32MB" >>include/config.h ; \
+ echo "#define CONFIG_FLASH_32MB" >>$(obj)include/config.h ; \
fi; \
else \
echo "... booting from 64-bit flash" ; \
if [ "$(findstring _BIGFLASH_,$@)" ] ; then \
echo "... with 32 MB Flash" ; \
- echo "#define CONFIG_FLASH_32MB" >>include/config.h ; \
- echo "TEXT_BASE = 0x40000000" >board/pm826/config.tmp ; \
+ echo "#define CONFIG_FLASH_32MB" >>$(obj)include/config.h ; \
+ echo "TEXT_BASE = 0x40000000" >$(obj)board/pm826/config.tmp ; \
else \
- echo "TEXT_BASE = 0xFF000000" >board/pm826/config.tmp ; \
+ echo "TEXT_BASE = 0xFF000000" >$(obj)board/pm826/config.tmp ; \
fi; \
fi
- @./mkconfig -a PM826 ppc mpc8260 pm826
+ @$(MKCONFIG) -a PM826 ppc mpc8260 pm826
PM828_config \
PM828_PCI_config \
PM828_ROMBOOT_config \
PM828_ROMBOOT_PCI_config: unconfig
+ @mkdir -p $(obj)include
+ @mkdir -p $(obj)board/pm826
@if [ "$(findstring _PCI_,$@)" ] ; then \
- echo "#define CONFIG_PCI" >>include/config.h ; \
+ echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
echo "... with PCI enabled" ; \
else \
- >include/config.h ; \
+ >$(obj)include/config.h ; \
fi
@if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
echo "... booting from 8-bit flash" ; \
- echo "#define CONFIG_BOOT_ROM" >>include/config.h ; \
- echo "TEXT_BASE = 0xFF800000" >board/pm826/config.tmp ; \
+ echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \
+ echo "TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \
fi
- @./mkconfig -a PM828 ppc mpc8260 pm828
+ @$(MKCONFIG) -a PM828 ppc mpc8260 pm828
ppmc8260_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8260 ppmc8260
+ @$(MKCONFIG) $(@:_config=) ppc mpc8260 ppmc8260
Rattler8248_config \
Rattler_config: unconfig
+ @mkdir -p $(obj)include
$(if $(findstring 8248,$@), \
- @echo "#define CONFIG_MPC8248" > include/config.h)
- @./mkconfig -a Rattler ppc mpc8260 rattler
+ @echo "#define CONFIG_MPC8248" > $(obj)include/config.h)
+ @$(MKCONFIG) -a Rattler ppc mpc8260 rattler
RPXsuper_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8260 rpxsuper
+ @$(MKCONFIG) $(@:_config=) ppc mpc8260 rpxsuper
rsdproto_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8260 rsdproto
+ @$(MKCONFIG) $(@:_config=) ppc mpc8260 rsdproto
sacsng_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8260 sacsng
+ @$(MKCONFIG) $(@:_config=) ppc mpc8260 sacsng
sbc8260_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8260 sbc8260
+ @$(MKCONFIG) $(@:_config=) ppc mpc8260 sbc8260
SCM_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8260 SCM siemens
+ @$(MKCONFIG) $(@:_config=) ppc mpc8260 SCM siemens
TQM8255_AA_config \
TQM8260_AA_config \
@@ -1299,6 +1481,7 @@
TQM8260_AH_config \
TQM8260_AI_config \
TQM8265_AA_config: unconfig
+ @mkdir -p $(obj)include
@case "$@" in \
TQM8255_AA_config) CTYPE=MPC8255; CFREQ=300; CACHE=no; BMODE=8260;; \
TQM8260_AA_config) CTYPE=MPC8260; CFREQ=200; CACHE=no; BMODE=8260;; \
@@ -1312,205 +1495,214 @@
TQM8260_AI_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=60x;; \
TQM8265_AA_config) CTYPE=MPC8265; CFREQ=300; CACHE=no; BMODE=60x;; \
esac; \
- >include/config.h ; \
+ >$(obj)include/config.h ; \
if [ "$${CTYPE}" != "MPC8260" ] ; then \
- echo "#define CONFIG_$${CTYPE}" >>include/config.h ; \
+ echo "#define CONFIG_$${CTYPE}" >>$(obj)include/config.h ; \
fi; \
- echo "#define CONFIG_$${CFREQ}MHz" >>include/config.h ; \
+ echo "#define CONFIG_$${CFREQ}MHz" >>$(obj)include/config.h ; \
echo "... with $${CFREQ}MHz system clock" ; \
if [ "$${CACHE}" == "yes" ] ; then \
- echo "#define CONFIG_L2_CACHE" >>include/config.h ; \
+ echo "#define CONFIG_L2_CACHE" >>$(obj)include/config.h ; \
echo "... with L2 Cache support" ; \
else \
- echo "#undef CONFIG_L2_CACHE" >>include/config.h ; \
+ echo "#undef CONFIG_L2_CACHE" >>$(obj)include/config.h ; \
echo "... without L2 Cache support" ; \
fi; \
if [ "$${BMODE}" == "60x" ] ; then \
- echo "#define CONFIG_BUSMODE_60x" >>include/config.h ; \
+ echo "#define CONFIG_BUSMODE_60x" >>$(obj)include/config.h ; \
echo "... with 60x Bus Mode" ; \
else \
- echo "#undef CONFIG_BUSMODE_60x" >>include/config.h ; \
+ echo "#undef CONFIG_BUSMODE_60x" >>$(obj)include/config.h ; \
echo "... without 60x Bus Mode" ; \
fi
- @./mkconfig -a TQM8260 ppc mpc8260 tqm8260
+ @$(MKCONFIG) -a TQM8260 ppc mpc8260 tqm8260
VoVPN-GW_66MHz_config \
VoVPN-GW_100MHz_config: unconfig
- @echo "#define CONFIG_CLKIN_$(word 2,$(subst _, ,$@))" > include/config.h
- @./mkconfig -a VoVPN-GW ppc mpc8260 vovpn-gw funkwerk
+ @mkdir -p $(obj)include
+ @echo "#define CONFIG_CLKIN_$(word 2,$(subst _, ,$@))" > $(obj)include/config.h
+ @$(MKCONFIG) -a VoVPN-GW ppc mpc8260 vovpn-gw funkwerk
ZPC1900_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8260 zpc1900
+ @$(MKCONFIG) $(@:_config=) ppc mpc8260 zpc1900
#########################################################################
## Coldfire
#########################################################################
cobra5272_config : unconfig
- @./mkconfig $(@:_config=) m68k mcf52x2 cobra5272
+ @$(MKCONFIG) $(@:_config=) m68k mcf52x2 cobra5272
EB+MCF-EV123_config : unconfig
- @ >include/config.h
- @echo "TEXT_BASE = 0xFFE00000"|tee board/BuS/EB+MCF-EV123/textbase.mk
- @./mkconfig EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS
+ @mkdir -p $(obj)include
+ @mkdir -p $(obj)board/BuS/EB+MCF-EV123
+ @ >$(obj)include/config.h
+ @echo "TEXT_BASE = 0xFFE00000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk
+ @$(MKCONFIG) EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS
EB+MCF-EV123_internal_config : unconfig
- @ >include/config.h
- @echo "TEXT_BASE = 0xF0000000"|tee board/BuS/EB+MCF-EV123/textbase.mk
- @./mkconfig EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS
+ @mkdir -p $(obj)include
+ @mkdir -p $(obj)board/BuS/EB+MCF-EV123
+ @ >$(obj)include/config.h
+ @echo "TEXT_BASE = 0xF0000000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk
+ @$(MKCONFIG) EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS
M5271EVB_config : unconfig
- @./mkconfig $(@:_config=) m68k mcf52x2 m5271evb
+ @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5271evb
M5272C3_config : unconfig
- @./mkconfig $(@:_config=) m68k mcf52x2 m5272c3
+ @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5272c3
M5282EVB_config : unconfig
- @./mkconfig $(@:_config=) m68k mcf52x2 m5282evb
+ @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5282evb
TASREG_config : unconfig
- @./mkconfig $(@:_config=) m68k mcf52x2 tasreg esd
+ @$(MKCONFIG) $(@:_config=) m68k mcf52x2 tasreg esd
r5200_config : unconfig
- @./mkconfig $(@:_config=) m68k mcf52x2 r5200
+ @$(MKCONFIG) $(@:_config=) m68k mcf52x2 r5200
#########################################################################
## MPC83xx Systems
#########################################################################
MPC8349ADS_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc83xx mpc8349ads
+ @$(MKCONFIG) $(@:_config=) ppc mpc83xx mpc8349ads
TQM834x_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc83xx tqm834x
+ @$(MKCONFIG) $(@:_config=) ppc mpc83xx tqm834x
MPC8349EMDS_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc83xx mpc8349emds
+ @$(MKCONFIG) $(@:_config=) ppc mpc83xx mpc8349emds
#########################################################################
## MPC85xx Systems
#########################################################################
MPC8540ADS_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc85xx mpc8540ads
+ @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8540ads
MPC8540EVAL_config \
MPC8540EVAL_33_config \
MPC8540EVAL_66_config \
MPC8540EVAL_33_slave_config \
MPC8540EVAL_66_slave_config: unconfig
- @echo "" >include/config.h ; \
+ @mkdir -p $(obj)include
+ @echo "" >$(obj)include/config.h ; \
if [ "$(findstring _33_,$@)" ] ; then \
echo -n "... 33 MHz PCI" ; \
else \
- echo "#define CONFIG_SYSCLK_66M" >>include/config.h ; \
+ echo "#define CONFIG_SYSCLK_66M" >>$(obj)include/config.h ; \
echo -n "... 66 MHz PCI" ; \
fi ; \
if [ "$(findstring _slave_,$@)" ] ; then \
- echo "#define CONFIG_PCI_SLAVE" >>include/config.h ; \
+ echo "#define CONFIG_PCI_SLAVE" >>$(obj)include/config.h ; \
echo " slave" ; \
else \
echo " host" ; \
fi
- @./mkconfig -a MPC8540EVAL ppc mpc85xx mpc8540eval
+ @$(MKCONFIG) -a MPC8540EVAL ppc mpc85xx mpc8540eval
MPC8560ADS_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc85xx mpc8560ads
+ @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8560ads
MPC8541CDS_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc85xx mpc8541cds cds
+ @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8541cds cds
MPC8548CDS_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc85xx mpc8548cds cds
+ @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8548cds cds
MPC8555CDS_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc85xx mpc8555cds cds
+ @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8555cds cds
PM854_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc85xx pm854
+ @$(MKCONFIG) $(@:_config=) ppc mpc85xx pm854
PM856_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc85xx pm856
+ @$(MKCONFIG) $(@:_config=) ppc mpc85xx pm856
sbc8540_config \
sbc8540_33_config \
sbc8540_66_config: unconfig
+ @mkdir -p $(obj)include
@if [ "$(findstring _66_,$@)" ] ; then \
- echo "#define CONFIG_PCI_66" >>include/config.h ; \
+ echo "#define CONFIG_PCI_66" >>$(obj)include/config.h ; \
echo "... 66 MHz PCI" ; \
else \
- >include/config.h ; \
+ >$(obj)include/config.h ; \
echo "... 33 MHz PCI" ; \
fi
- @./mkconfig -a SBC8540 ppc mpc85xx sbc8560
+ @$(MKCONFIG) -a SBC8540 ppc mpc85xx sbc8560
sbc8560_config \
sbc8560_33_config \
sbc8560_66_config: unconfig
+ @mkdir -p $(obj)include
@if [ "$(findstring _66_,$@)" ] ; then \
- echo "#define CONFIG_PCI_66" >>include/config.h ; \
+ echo "#define CONFIG_PCI_66" >>$(obj)include/config.h ; \
echo "... 66 MHz PCI" ; \
else \
- >include/config.h ; \
+ >$(obj)include/config.h ; \
echo "... 33 MHz PCI" ; \
fi
- @./mkconfig -a sbc8560 ppc mpc85xx sbc8560
+ @$(MKCONFIG) -a sbc8560 ppc mpc85xx sbc8560
stxgp3_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc85xx stxgp3
+ @$(MKCONFIG) $(@:_config=) ppc mpc85xx stxgp3
TQM8540_config \
TQM8541_config \
TQM8555_config \
TQM8560_config: unconfig
+ @mkdir -p $(obj)include
@CTYPE=$(subst TQM,,$(@:_config=)); \
- >include/config.h ; \
+ >$(obj)include/config.h ; \
echo "... TQM"$${CTYPE}; \
- echo "#define CONFIG_MPC$${CTYPE}">>include/config.h; \
- echo "#define CONFIG_TQM$${CTYPE}">>include/config.h; \
- echo "#define CONFIG_HOSTNAME tqm$${CTYPE}">>include/config.h; \
- echo "#define CONFIG_BOARDNAME \"TQM$${CTYPE}\"">>include/config.h; \
- echo "#define CFG_BOOTFILE \"bootfile=/tftpboot/tqm$${CTYPE}/uImage\0\"">>include/config.h
- @./mkconfig -a TQM85xx ppc mpc85xx tqm85xx
+ echo "#define CONFIG_MPC$${CTYPE}">>$(obj)include/config.h; \
+ echo "#define CONFIG_TQM$${CTYPE}">>$(obj)include/config.h; \
+ echo "#define CONFIG_HOSTNAME tqm$${CTYPE}">>$(obj)include/config.h; \
+ echo "#define CONFIG_BOARDNAME \"TQM$${CTYPE}\"">>$(obj)include/config.h; \
+ echo "#define CFG_BOOTFILE \"bootfile=/tftpboot/tqm$${CTYPE}/uImage\0\"">>$(obj)include/config.h
+ @$(MKCONFIG) -a TQM85xx ppc mpc85xx tqm85xx
#########################################################################
## 74xx/7xx Systems
#########################################################################
AmigaOneG3SE_config: unconfig
- @./mkconfig $(@:_config=) ppc 74xx_7xx AmigaOneG3SE MAI
+ @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx AmigaOneG3SE MAI
BAB7xx_config: unconfig
- @./mkconfig $(@:_config=) ppc 74xx_7xx bab7xx eltec
+ @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx bab7xx eltec
CPCI750_config: unconfig
- @./mkconfig CPCI750 ppc 74xx_7xx cpci750 esd
+ @$(MKCONFIG) CPCI750 ppc 74xx_7xx cpci750 esd
DB64360_config: unconfig
- @./mkconfig DB64360 ppc 74xx_7xx db64360 Marvell
+ @$(MKCONFIG) DB64360 ppc 74xx_7xx db64360 Marvell
DB64460_config: unconfig
- @./mkconfig DB64460 ppc 74xx_7xx db64460 Marvell
+ @$(MKCONFIG) DB64460 ppc 74xx_7xx db64460 Marvell
ELPPC_config: unconfig
- @./mkconfig $(@:_config=) ppc 74xx_7xx elppc eltec
+ @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx elppc eltec
EVB64260_config \
EVB64260_750CX_config: unconfig
- @./mkconfig EVB64260 ppc 74xx_7xx evb64260
+ @$(MKCONFIG) EVB64260 ppc 74xx_7xx evb64260
P3G4_config: unconfig
- @./mkconfig $(@:_config=) ppc 74xx_7xx evb64260
+ @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx evb64260
PCIPPC2_config \
PCIPPC6_config: unconfig
- @./mkconfig $(@:_config=) ppc 74xx_7xx pcippc2
+ @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx pcippc2
ZUMA_config: unconfig
- @./mkconfig $(@:_config=) ppc 74xx_7xx evb64260
+ @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx evb64260
ppmc7xx_config: unconfig
- @./mkconfig $(@:_config=) ppc 74xx_7xx ppmc7xx
+ @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx ppmc7xx
#========================================================================
# ARM
@@ -1520,19 +1712,19 @@
#########################################################################
assabet_config : unconfig
- @./mkconfig $(@:_config=) arm sa1100 assabet
+ @$(MKCONFIG) $(@:_config=) arm sa1100 assabet
dnp1110_config : unconfig
- @./mkconfig $(@:_config=) arm sa1100 dnp1110
+ @$(MKCONFIG) $(@:_config=) arm sa1100 dnp1110
gcplus_config : unconfig
- @./mkconfig $(@:_config=) arm sa1100 gcplus
+ @$(MKCONFIG) $(@:_config=) arm sa1100 gcplus
lart_config : unconfig
- @./mkconfig $(@:_config=) arm sa1100 lart
+ @$(MKCONFIG) $(@:_config=) arm sa1100 lart
shannon_config : unconfig
- @./mkconfig $(@:_config=) arm sa1100 shannon
+ @$(MKCONFIG) $(@:_config=) arm sa1100 shannon
#########################################################################
## ARM92xT Systems
@@ -1545,16 +1737,16 @@
xtract_omap730p2 = $(subst _cs0boot,,$(subst _cs3boot,, $(subst _config,,$1)))
at91rm9200dk_config : unconfig
- @./mkconfig $(@:_config=) arm arm920t at91rm9200dk NULL at91rm9200
+ @$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200dk NULL at91rm9200
cmc_pu2_config : unconfig
- @./mkconfig $(@:_config=) arm arm920t cmc_pu2 NULL at91rm9200
+ @$(MKCONFIG) $(@:_config=) arm arm920t cmc_pu2 NULL at91rm9200
csb637_config : unconfig
- @./mkconfig $(@:_config=) arm arm920t csb637 NULL at91rm9200
+ @$(MKCONFIG) $(@:_config=) arm arm920t csb637 NULL at91rm9200
mp2usb_config : unconfig
- @./mkconfig $(@:_config=) arm arm920t mp2usb NULL at91rm9200
+ @$(MKCONFIG) $(@:_config=) arm arm920t mp2usb NULL at91rm9200
########################################################################
@@ -1584,34 +1776,35 @@
@board/integratorcp/split_by_variant.sh $@
kb9202_config : unconfig
- @./mkconfig $(@:_config=) arm arm920t kb9202 NULL at91rm9200
+ @$(MKCONFIG) $(@:_config=) arm arm920t kb9202 NULL at91rm9200
lpd7a400_config \
lpd7a404_config: unconfig
- @./mkconfig $(@:_config=) arm lh7a40x lpd7a40x
+ @$(MKCONFIG) $(@:_config=) arm lh7a40x lpd7a40x
mx1ads_config : unconfig
- @./mkconfig $(@:_config=) arm arm920t mx1ads NULL imx
+ @$(MKCONFIG) $(@:_config=) arm arm920t mx1ads NULL imx
mx1fs2_config : unconfig
- @./mkconfig $(@:_config=) arm arm920t mx1fs2 NULL imx
+ @$(MKCONFIG) $(@:_config=) arm arm920t mx1fs2 NULL imx
netstar_32_config \
netstar_config: unconfig
+ @mkdir -p $(obj)include
@if [ "$(findstring _32_,$@)" ] ; then \
echo "... 32MB SDRAM" ; \
- echo "#define PHYS_SDRAM_1_SIZE SZ_32M" >>include/config.h ; \
+ echo "#define PHYS_SDRAM_1_SIZE SZ_32M" >>$(obj)include/config.h ; \
else \
echo "... 64MB SDRAM" ; \
- echo "#define PHYS_SDRAM_1_SIZE SZ_64M" >>include/config.h ; \
+ echo "#define PHYS_SDRAM_1_SIZE SZ_64M" >>$(obj)include/config.h ; \
fi
- @./mkconfig -a netstar arm arm925t netstar
+ @$(MKCONFIG) -a netstar arm arm925t netstar
omap1510inn_config : unconfig
- @./mkconfig $(@:_config=) arm arm925t omap1510inn
+ @$(MKCONFIG) $(@:_config=) arm arm925t omap1510inn
omap5912osk_config : unconfig
- @./mkconfig $(@:_config=) arm arm926ejs omap5912osk NULL omap
+ @$(MKCONFIG) $(@:_config=) arm arm926ejs omap5912osk NULL omap
omap1610inn_config \
omap1610inn_cs0boot_config \
@@ -1621,72 +1814,76 @@
omap1610h2_cs0boot_config \
omap1610h2_cs3boot_config \
omap1610h2_cs_autoboot_config: unconfig
+ @mkdir -p $(obj)include
@if [ "$(findstring _cs0boot_, $@)" ] ; then \
- echo "#define CONFIG_CS0_BOOT" >> ./include/config.h ; \
+ echo "#define CONFIG_CS0_BOOT" >> .$(obj)/include/config.h ; \
echo "... configured for CS0 boot"; \
elif [ "$(findstring _cs_autoboot_, $@)" ] ; then \
- echo "#define CONFIG_CS_AUTOBOOT" >> ./include/config.h ; \
+ echo "#define CONFIG_CS_AUTOBOOT" >> $(obj)./include/config.h ; \
echo "... configured for CS_AUTO boot"; \
else \
- echo "#define CONFIG_CS3_BOOT" >> ./include/config.h ; \
+ echo "#define CONFIG_CS3_BOOT" >> $(obj)./include/config.h ; \
echo "... configured for CS3 boot"; \
fi;
- @./mkconfig -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn NULL omap
+ @$(MKCONFIG) -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn NULL omap
omap730p2_config \
omap730p2_cs0boot_config \
omap730p2_cs3boot_config : unconfig
+ @mkdir -p $(obj)include
@if [ "$(findstring _cs0boot_, $@)" ] ; then \
- echo "#define CONFIG_CS0_BOOT" >> ./include/config.h ; \
+ echo "#define CONFIG_CS0_BOOT" >> $(obj)include/config.h ; \
echo "... configured for CS0 boot"; \
else \
- echo "#define CONFIG_CS3_BOOT" >> ./include/config.h ; \
+ echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \
echo "... configured for CS3 boot"; \
fi;
- @./mkconfig -a $(call xtract_omap730p2,$@) arm arm926ejs omap730p2 NULL omap
+ @$(MKCONFIG) -a $(call xtract_omap730p2,$@) arm arm926ejs omap730p2 NULL omap
sbc2410x_config: unconfig
- @./mkconfig $(@:_config=) arm arm920t sbc2410x NULL s3c24x0
+ @$(MKCONFIG) $(@:_config=) arm arm920t sbc2410x NULL s3c24x0
scb9328_config : unconfig
- @./mkconfig $(@:_config=) arm arm920t scb9328 NULL imx
+ @$(MKCONFIG) $(@:_config=) arm arm920t scb9328 NULL imx
smdk2400_config : unconfig
- @./mkconfig $(@:_config=) arm arm920t smdk2400 NULL s3c24x0
+ @$(MKCONFIG) $(@:_config=) arm arm920t smdk2400 NULL s3c24x0
smdk2410_config : unconfig
- @./mkconfig $(@:_config=) arm arm920t smdk2410 NULL s3c24x0
+ @$(MKCONFIG) $(@:_config=) arm arm920t smdk2410 NULL s3c24x0
SX1_config : unconfig
- @./mkconfig $(@:_config=) arm arm925t sx1
+ @$(MKCONFIG) $(@:_config=) arm arm925t sx1
# TRAB default configuration: 8 MB Flash, 32 MB RAM
trab_config \
trab_bigram_config \
trab_bigflash_config \
trab_old_config: unconfig
- @ >include/config.h
+ @mkdir -p $(obj)include
+ @mkdir -p $(obj)board/trab
+ @ >$(obj)include/config.h
@[ -z "$(findstring _bigram,$@)" ] || \
- { echo "#define CONFIG_FLASH_8MB" >>include/config.h ; \
- echo "#define CONFIG_RAM_32MB" >>include/config.h ; \
+ { echo "#define CONFIG_FLASH_8MB" >>$(obj)include/config.h ; \
+ echo "#define CONFIG_RAM_32MB" >>$(obj)include/config.h ; \
echo "... with 8 MB Flash, 32 MB RAM" ; \
}
@[ -z "$(findstring _bigflash,$@)" ] || \
- { echo "#define CONFIG_FLASH_16MB" >>include/config.h ; \
- echo "#define CONFIG_RAM_16MB" >>include/config.h ; \
+ { echo "#define CONFIG_FLASH_16MB" >>$(obj)include/config.h ; \
+ echo "#define CONFIG_RAM_16MB" >>$(obj)include/config.h ; \
echo "... with 16 MB Flash, 16 MB RAM" ; \
- echo "TEXT_BASE = 0x0CF40000" >board/trab/config.tmp ; \
+ echo "TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \
}
@[ -z "$(findstring _old,$@)" ] || \
- { echo "#define CONFIG_FLASH_8MB" >>include/config.h ; \
- echo "#define CONFIG_RAM_16MB" >>include/config.h ; \
+ { echo "#define CONFIG_FLASH_8MB" >>$(obj)include/config.h ; \
+ echo "#define CONFIG_RAM_16MB" >>$(obj)include/config.h ; \
echo "... with 8 MB Flash, 16 MB RAM" ; \
- echo "TEXT_BASE = 0x0CF40000" >board/trab/config.tmp ; \
+ echo "TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \
}
- @./mkconfig -a $(call xtract_trab,$@) arm arm920t trab NULL s3c24x0
+ @$(MKCONFIG) -a $(call xtract_trab,$@) arm arm920t trab NULL s3c24x0
VCMA9_config : unconfig
- @./mkconfig $(@:_config=) arm arm920t vcma9 mpl s3c24x0
+ @$(MKCONFIG) $(@:_config=) arm arm920t vcma9 mpl s3c24x0
#========================================================================
# ARM supplied Versatile development boards
@@ -1698,117 +1895,120 @@
voiceblue_smallflash_config \
voiceblue_config: unconfig
+ @mkdir -p $(obj)include
+ @mkdir -p $(obj)board/voiceblue
@if [ "$(findstring _smallflash_,$@)" ] ; then \
echo "... boot from lower flash bank" ; \
- echo "#define VOICEBLUE_SMALL_FLASH" >>include/config.h ; \
- echo "VOICEBLUE_SMALL_FLASH=y" >board/voiceblue/config.tmp ; \
+ echo "#define VOICEBLUE_SMALL_FLASH" >>$(obj)include/config.h ; \
+ echo "VOICEBLUE_SMALL_FLASH=y" >$(obj)board/voiceblue/config.tmp ; \
else \
echo "... boot from upper flash bank" ; \
- >include/config.h ; \
- echo "VOICEBLUE_SMALL_FLASH=n" >board/voiceblue/config.tmp ; \
+ >$(obj)include/config.h ; \
+ echo "VOICEBLUE_SMALL_FLASH=n" >$(obj)board/voiceblue/config.tmp ; \
fi
- @./mkconfig -a voiceblue arm arm925t voiceblue
+ @$(MKCONFIG) -a voiceblue arm arm925t voiceblue
cm4008_config : unconfig
- @./mkconfig $(@:_config=) arm arm920t cm4008 NULL ks8695
+ @$(MKCONFIG) $(@:_config=) arm arm920t cm4008 NULL ks8695
cm41xx_config : unconfig
- @./mkconfig $(@:_config=) arm arm920t cm41xx NULL ks8695
+ @$(MKCONFIG) $(@:_config=) arm arm920t cm41xx NULL ks8695
gth2_config : unconfig
- @ >include/config.h
- @echo "#define CONFIG_GTH2 1" >>include/config.h
- @./mkconfig -a gth2 mips mips gth2
+ @mkdir -p $(obj)include
+ @ >$(obj)include/config.h
+ @echo "#define CONFIG_GTH2 1" >>$(obj)include/config.h
+ @$(MKCONFIG) -a gth2 mips mips gth2
#########################################################################
## S3C44B0 Systems
#########################################################################
B2_config : unconfig
- @./mkconfig $(@:_config=) arm s3c44b0 B2 dave
+ @$(MKCONFIG) $(@:_config=) arm s3c44b0 B2 dave
#########################################################################
## ARM720T Systems
#########################################################################
armadillo_config: unconfig
- @./mkconfig $(@:_config=) arm arm720t armadillo
+ @$(MKCONFIG) $(@:_config=) arm arm720t armadillo
ep7312_config : unconfig
- @./mkconfig $(@:_config=) arm arm720t ep7312
+ @$(MKCONFIG) $(@:_config=) arm arm720t ep7312
impa7_config : unconfig
- @./mkconfig $(@:_config=) arm arm720t impa7
+ @$(MKCONFIG) $(@:_config=) arm arm720t impa7
modnet50_config : unconfig
- @./mkconfig $(@:_config=) arm arm720t modnet50
+ @$(MKCONFIG) $(@:_config=) arm arm720t modnet50
evb4510_config : unconfig
- @./mkconfig $(@:_config=) arm arm720t evb4510
+ @$(MKCONFIG) $(@:_config=) arm arm720t evb4510
#########################################################################
## XScale Systems
#########################################################################
adsvix_config : unconfig
- @./mkconfig $(@:_config=) arm pxa adsvix
+ @$(MKCONFIG) $(@:_config=) arm pxa adsvix
cerf250_config : unconfig
- @./mkconfig $(@:_config=) arm pxa cerf250
+ @$(MKCONFIG) $(@:_config=) arm pxa cerf250
cradle_config : unconfig
- @./mkconfig $(@:_config=) arm pxa cradle
+ @$(MKCONFIG) $(@:_config=) arm pxa cradle
csb226_config : unconfig
- @./mkconfig $(@:_config=) arm pxa csb226
+ @$(MKCONFIG) $(@:_config=) arm pxa csb226
delta_config :
- @./mkconfig $(@:_config=) arm pxa delta
+ @$(MKCONFIG) $(@:_config=) arm pxa delta
innokom_config : unconfig
- @./mkconfig $(@:_config=) arm pxa innokom
+ @$(MKCONFIG) $(@:_config=) arm pxa innokom
ixdp425_config : unconfig
- @./mkconfig $(@:_config=) arm ixp ixdp425
+ @$(MKCONFIG) $(@:_config=) arm ixp ixdp425
ixdpg425_config : unconfig
- @./mkconfig $(@:_config=) arm ixp ixdp425
+ @$(MKCONFIG) $(@:_config=) arm ixp ixdp425
lubbock_config : unconfig
- @./mkconfig $(@:_config=) arm pxa lubbock
+ @$(MKCONFIG) $(@:_config=) arm pxa lubbock
pleb2_config : unconfig
- @./mkconfig $(@:_config=) arm pxa pleb2
+ @$(MKCONFIG) $(@:_config=) arm pxa pleb2
logodl_config : unconfig
- @./mkconfig $(@:_config=) arm pxa logodl
+ @$(MKCONFIG) $(@:_config=) arm pxa logodl
pdnb3_config : unconfig
- @./mkconfig $(@:_config=) arm ixp pdnb3 prodrive
+ @$(MKCONFIG) $(@:_config=) arm ixp pdnb3 prodrive
pxa255_idp_config: unconfig
- @./mkconfig $(@:_config=) arm pxa pxa255_idp
+ @$(MKCONFIG) $(@:_config=) arm pxa pxa255_idp
wepep250_config : unconfig
- @./mkconfig $(@:_config=) arm pxa wepep250
+ @$(MKCONFIG) $(@:_config=) arm pxa wepep250
xaeniax_config : unconfig
- @./mkconfig $(@:_config=) arm pxa xaeniax
+ @$(MKCONFIG) $(@:_config=) arm pxa xaeniax
xm250_config : unconfig
- @./mkconfig $(@:_config=) arm pxa xm250
+ @$(MKCONFIG) $(@:_config=) arm pxa xm250
xsengine_config : unconfig
- @./mkconfig $(@:_config=) arm pxa xsengine
+ @$(MKCONFIG) $(@:_config=) arm pxa xsengine
zylonite_config :
- @./mkconfig $(@:_config=) arm pxa zylonite
+ @$(MKCONFIG) $(@:_config=) arm pxa zylonite
#########################################################################
## ARM1136 Systems
#########################################################################
omap2420h4_config : unconfig
- @./mkconfig $(@:_config=) arm arm1136 omap2420h4
+ @$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4
#========================================================================
# i386
@@ -1817,13 +2017,13 @@
## AMD SC520 CDP
#########################################################################
sc520_cdp_config : unconfig
- @./mkconfig $(@:_config=) i386 i386 sc520_cdp
+ @$(MKCONFIG) $(@:_config=) i386 i386 sc520_cdp
sc520_spunk_config : unconfig
- @./mkconfig $(@:_config=) i386 i386 sc520_spunk
+ @$(MKCONFIG) $(@:_config=) i386 i386 sc520_spunk
sc520_spunk_rel_config : unconfig
- @./mkconfig $(@:_config=) i386 i386 sc520_spunk
+ @$(MKCONFIG) $(@:_config=) i386 i386 sc520_spunk
#========================================================================
# MIPS
@@ -1838,63 +2038,70 @@
incaip_133MHz_config \
incaip_150MHz_config \
incaip_config: unconfig
- @ >include/config.h
+ @mkdir -p $(obj)include
+ @ >$(obj)include/config.h
@[ -z "$(findstring _100MHz,$@)" ] || \
- { echo "#define CPU_CLOCK_RATE 100000000" >>include/config.h ; \
+ { echo "#define CPU_CLOCK_RATE 100000000" >>$(obj)include/config.h ; \
echo "... with 100MHz system clock" ; \
}
@[ -z "$(findstring _133MHz,$@)" ] || \
- { echo "#define CPU_CLOCK_RATE 133000000" >>include/config.h ; \
+ { echo "#define CPU_CLOCK_RATE 133000000" >>$(obj)include/config.h ; \
echo "... with 133MHz system clock" ; \
}
@[ -z "$(findstring _150MHz,$@)" ] || \
- { echo "#define CPU_CLOCK_RATE 150000000" >>include/config.h ; \
+ { echo "#define CPU_CLOCK_RATE 150000000" >>$(obj)include/config.h ; \
echo "... with 150MHz system clock" ; \
}
- @./mkconfig -a $(call xtract_incaip,$@) mips mips incaip
+ @$(MKCONFIG) -a $(call xtract_incaip,$@) mips mips incaip
tb0229_config: unconfig
- @./mkconfig $(@:_config=) mips mips tb0229
+ @$(MKCONFIG) $(@:_config=) mips mips tb0229
#########################################################################
## MIPS32 AU1X00
#########################################################################
dbau1000_config : unconfig
- @ >include/config.h
- @echo "#define CONFIG_DBAU1000 1" >>include/config.h
- @./mkconfig -a dbau1x00 mips mips dbau1x00
+ @mkdir -p $(obj)include
+ @ >$(obj)include/config.h
+ @echo "#define CONFIG_DBAU1000 1" >>$(obj)include/config.h
+ @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
dbau1100_config : unconfig
- @ >include/config.h
- @echo "#define CONFIG_DBAU1100 1" >>include/config.h
- @./mkconfig -a dbau1x00 mips mips dbau1x00
+ @mkdir -p $(obj)include
+ @ >$(obj)include/config.h
+ @echo "#define CONFIG_DBAU1100 1" >>$(obj)include/config.h
+ @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
dbau1500_config : unconfig
- @ >include/config.h
- @echo "#define CONFIG_DBAU1500 1" >>include/config.h
- @./mkconfig -a dbau1x00 mips mips dbau1x00
+ @mkdir -p $(obj)include
+ @ >$(obj)include/config.h
+ @echo "#define CONFIG_DBAU1500 1" >>$(obj)include/config.h
+ @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
dbau1550_config : unconfig
- @ >include/config.h
- @echo "#define CONFIG_DBAU1550 1" >>include/config.h
- @./mkconfig -a dbau1x00 mips mips dbau1x00
+ @mkdir -p $(obj)include
+ @ >$(obj)include/config.h
+ @echo "#define CONFIG_DBAU1550 1" >>$(obj)include/config.h
+ @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
dbau1550_el_config : unconfig
- @ >include/config.h
- @echo "#define CONFIG_DBAU1550 1" >>include/config.h
- @./mkconfig -a dbau1x00 mips mips dbau1x00
+ @mkdir -p $(obj)include
+ @ >$(obj)include/config.h
+ @echo "#define CONFIG_DBAU1550 1" >>$(obj)include/config.h
+ @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
pb1000_config : unconfig
- @ >include/config.h
- @echo "#define CONFIG_PB1000 1" >>include/config.h
- @./mkconfig -a pb1x00 mips mips pb1x00
+ @mkdir -p $(obj)include
+ @ >$(obj)include/config.h
+ @echo "#define CONFIG_PB1000 1" >>$(obj)include/config.h
+ @$(MKCONFIG) -a pb1x00 mips mips pb1x00
#########################################################################
## MIPS64 5Kc
#########################################################################
purple_config : unconfig
- @./mkconfig $(@:_config=) mips mips purple
+ @$(MKCONFIG) $(@:_config=) mips mips purple
#========================================================================
# Nios
@@ -1906,80 +2113,83 @@
DK1C20_safe_32_config \
DK1C20_standard_32_config \
DK1C20_config: unconfig
- @ >include/config.h
+ @mkdir -p $(obj)include
+ @ >$(obj)include/config.h
@[ -z "$(findstring _safe_32,$@)" ] || \
- { echo "#define CONFIG_NIOS_SAFE_32 1" >>include/config.h ; \
+ { echo "#define CONFIG_NIOS_SAFE_32 1" >>$(obj)include/config.h ; \
echo "... NIOS 'safe_32' configuration" ; \
}
@[ -z "$(findstring _standard_32,$@)" ] || \
- { echo "#define CONFIG_NIOS_STANDARD_32 1" >>include/config.h ; \
+ { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \
echo "... NIOS 'standard_32' configuration" ; \
}
@[ -z "$(findstring DK1C20_config,$@)" ] || \
- { echo "#define CONFIG_NIOS_STANDARD_32 1" >>include/config.h ; \
+ { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \
echo "... NIOS 'standard_32' configuration (DEFAULT)" ; \
}
- @./mkconfig -a DK1C20 nios nios dk1c20 altera
+ @$(MKCONFIG) -a DK1C20 nios nios dk1c20 altera
DK1S10_safe_32_config \
DK1S10_standard_32_config \
DK1S10_mtx_ldk_20_config \
DK1S10_config: unconfig
- @ >include/config.h
+ @mkdir -p $(obj)include
+ @ >$(obj)include/config.h
@[ -z "$(findstring _safe_32,$@)" ] || \
- { echo "#define CONFIG_NIOS_SAFE_32 1" >>include/config.h ; \
+ { echo "#define CONFIG_NIOS_SAFE_32 1" >>$(obj)include/config.h ; \
echo "... NIOS 'safe_32' configuration" ; \
}
@[ -z "$(findstring _standard_32,$@)" ] || \
- { echo "#define CONFIG_NIOS_STANDARD_32 1" >>include/config.h ; \
+ { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \
echo "... NIOS 'standard_32' configuration" ; \
}
@[ -z "$(findstring _mtx_ldk_20,$@)" ] || \
- { echo "#define CONFIG_NIOS_MTX_LDK_20 1" >>include/config.h ; \
+ { echo "#define CONFIG_NIOS_MTX_LDK_20 1" >>$(obj)include/config.h ; \
echo "... NIOS 'mtx_ldk_20' configuration" ; \
}
@[ -z "$(findstring DK1S10_config,$@)" ] || \
- { echo "#define CONFIG_NIOS_STANDARD_32 1" >>include/config.h ; \
+ { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \
echo "... NIOS 'standard_32' configuration (DEFAULT)" ; \
}
- @./mkconfig -a DK1S10 nios nios dk1s10 altera
+ @$(MKCONFIG) -a DK1S10 nios nios dk1s10 altera
ADNPESC1_DNPEVA2_base_32_config \
ADNPESC1_base_32_config \
ADNPESC1_config: unconfig
- @ >include/config.h
+ @mkdir -p $(obj)include
+ @ >$(obj)include/config.h
@[ -z "$(findstring _DNPEVA2,$@)" ] || \
- { echo "#define CONFIG_DNPEVA2 1" >>include/config.h ; \
+ { echo "#define CONFIG_DNPEVA2 1" >>$(obj)include/config.h ; \
echo "... DNP/EVA2 configuration" ; \
}
@[ -z "$(findstring _base_32,$@)" ] || \
- { echo "#define CONFIG_NIOS_BASE_32 1" >>include/config.h ; \
+ { echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \
echo "... NIOS 'base_32' configuration" ; \
}
@[ -z "$(findstring ADNPESC1_config,$@)" ] || \
- { echo "#define CONFIG_NIOS_BASE_32 1" >>include/config.h ; \
+ { echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \
echo "... NIOS 'base_32' configuration (DEFAULT)" ; \
}
- @./mkconfig -a ADNPESC1 nios nios adnpesc1 ssv
+ @$(MKCONFIG) -a ADNPESC1 nios nios adnpesc1 ssv
#########################################################################
## Nios-II
#########################################################################
EP1C20_config : unconfig
- @./mkconfig EP1C20 nios2 nios2 ep1c20 altera
+ @$(MKCONFIG) EP1C20 nios2 nios2 ep1c20 altera
EP1S10_config : unconfig
- @./mkconfig EP1S10 nios2 nios2 ep1s10 altera
+ @$(MKCONFIG) EP1S10 nios2 nios2 ep1s10 altera
EP1S40_config : unconfig
- @./mkconfig EP1S40 nios2 nios2 ep1s40 altera
+ @$(MKCONFIG) EP1S40 nios2 nios2 ep1s40 altera
PK1C20_config : unconfig
- @./mkconfig PK1C20 nios2 nios2 pk1c20 psyent
+ @$(MKCONFIG) PK1C20 nios2 nios2 pk1c20 psyent
PCI5441_config : unconfig
- @./mkconfig PCI5441 nios2 nios2 pci5441 psyent
+ @$(MKCONFIG) PCI5441 nios2 nios2 pci5441 psyent
#========================================================================
# MicroBlaze
@@ -1988,62 +2198,72 @@
## Microblaze
#########################################################################
suzaku_config: unconfig
- @ >include/config.h
- @echo "#define CONFIG_SUZAKU 1" >> include/config.h
- @./mkconfig -a $(@:_config=) microblaze microblaze suzaku AtmarkTechno
+ @mkdir -p $(obj)include
+ @ >$(obj)include/config.h
+ @echo "#define CONFIG_SUZAKU 1" >> $(obj)include/config.h
+ @$(MKCONFIG) -a $(@:_config=) microblaze microblaze suzaku AtmarkTechno
#########################################################################
## Blackfin
#########################################################################
ezkit533_config : unconfig
- @./mkconfig $(@:_config=) blackfin bf533 ezkit533
+ @$(MKCONFIG) $(@:_config=) blackfin bf533 ezkit533
stamp_config : unconfig
- @./mkconfig $(@:_config=) blackfin bf533 stamp
+ @$(MKCONFIG) $(@:_config=) blackfin bf533 stamp
dspstamp_config : unconfig
- @./mkconfig $(@:_config=) blackfin bf533 dsp_stamp
+ @$(MKCONFIG) $(@:_config=) blackfin bf533 dsp_stamp
#########################################################################
#########################################################################
#########################################################################
clean:
- find . -type f \
+ find $(OBJTREE) -type f \
\( -name 'core' -o -name '*.bak' -o -name '*~' \
-o -name '*.o' -o -name '*.a' \) -print \
| xargs rm -f
- rm -f examples/hello_world examples/timer \
- examples/eepro100_eeprom examples/sched \
- examples/mem_to_mem_idma2intr examples/82559_eeprom \
- examples/smc91111_eeprom \
- examples/test_burst
- rm -f tools/img2srec tools/mkimage tools/envcrc tools/gen_eth_addr
- rm -f tools/mpc86x_clk tools/ncb
- rm -f tools/easylogo/easylogo tools/bmp_logo
- rm -f tools/gdb/astest tools/gdb/gdbcont tools/gdb/gdbsend
- rm -f tools/env/fw_printenv tools/env/fw_setenv
- rm -f board/cray/L1/bootscript.c board/cray/L1/bootscript.image
- rm -f board/netstar/eeprom board/netstar/crcek
- rm -f board/netstar/*.srec board/netstar/*.bin
- rm -f board/trab/trab_fkt board/voiceblue/eeprom
- rm -f board/integratorap/u-boot.lds board/integratorcp/u-boot.lds
- rm -f include/bmp_logo.h
+ rm -f $(obj)examples/hello_world $(obj)examples/timer \
+ $(obj)examples/eepro100_eeprom $(obj)examples/sched \
+ $(obj)examples/mem_to_mem_idma2intr $(obj)examples/82559_eeprom \
+ $(obj)examples/smc91111_eeprom $(obj)examples/interrupt \
+ $(obj)examples/test_burst
+ rm -f $(obj)tools/img2srec $(obj)tools/mkimage $(obj)tools/envcrc \
+ $(obj)tools/gen_eth_addr
+ rm -f $(obj)tools/mpc86x_clk $(obj)tools/ncb
+ rm -f $(obj)tools/easylogo/easylogo $(obj)tools/bmp_logo
+ rm -f $(obj)tools/gdb/astest $(obj)tools/gdb/gdbcont $(obj)tools/gdb/gdbsend
+ rm -f $(obj)tools/env/fw_printenv $(obj)tools/env/fw_setenv
+ rm -f $(obj)board/cray/L1/bootscript.c $(obj)board/cray/L1/bootscript.image
+ rm -f $(obj)board/netstar/eeprom $(obj)board/netstar/crcek $(obj)board/netstar/crcit
+ rm -f $(obj)board/netstar/*.srec $(obj)board/netstar/*.bin
+ rm -f $(obj)board/trab/trab_fkt $(obj)board/voiceblue/eeprom
+ rm -f $(obj)board/integratorap/u-boot.lds $(obj)board/integratorcp/u-boot.lds
+ rm -f $(obj)include/bmp_logo.h
+ find nand_spl -lname "*" -print | xargs rm -f
+ rm -f nand_spl/u-boot-spl nand_spl/u-boot-spl.map
clobber: clean
- find . -type f \( -name .depend \
+ find $(OBJTREE) -type f \( -name .depend \
-o -name '*.srec' -o -name '*.bin' -o -name u-boot.img \) \
-print0 \
| xargs -0 rm -f
- rm -f $(OBJS) *.bak tags TAGS include/version_autogenerated.h
- rm -fr *.*~
- rm -f u-boot u-boot.map u-boot.hex $(ALL)
- rm -f tools/crc32.c tools/environment.c tools/env/crc32.c
- rm -f tools/inca-swap-bytes cpu/mpc824x/bedbug_603e.c
- rm -f include/asm/proc include/asm/arch include/asm
+ rm -f $(OBJS) $(obj)*.bak $(obj)ctags $(obj)etags $(obj)TAGS $(obj)include/version_autogenerated.h
+ rm -fr $(obj)*.*~
+ rm -f $(obj)u-boot $(obj)u-boot.map $(obj)u-boot.hex $(ALL)
+ rm -f $(obj)tools/crc32.c $(obj)tools/environment.c $(obj)tools/env/crc32.c
+ rm -f $(obj)tools/inca-swap-bytes $(obj)cpu/mpc824x/bedbug_603e.c
+ rm -f $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm
+ifeq ($(OBJTREE),$(SRCTREE))
mrproper \
distclean: clobber unconfig
+else
+mrproper \
+distclean: clobber unconfig
+ rm -rf $(OBJTREE)/*
+endif
backup:
F=`basename $(TOPDIR)` ; cd .. ; \
diff --git a/README b/README
index 621f3f3..32a5d68 100644
--- a/README
+++ b/README
@@ -2328,6 +2328,26 @@
- "u-boot" is an image in ELF binary format
- "u-boot.srec" is in Motorola S-Record format
+By default the build is performed locally and the objects are saved
+in the source directory. One of the two methods can be used to change
+this behavior and build U-Boot to some external directory:
+
+1. Add O= to the make command line invocations:
+
+ make O=/tmp/build distclean
+ make O=/tmp/build NAME_config
+ make O=/tmp/build all
+
+2. Set environment variable BUILD_DIR to point to the desired location:
+
+ export BUILD_DIR=/tmp/build
+ make distclean
+ make NAME_config
+ make all
+
+Note that the command line "O=" setting overrides the BUILD_DIR environment
+variable.
+
Please be aware that the Makefiles assume you are using GNU make, so
for instance on NetBSD you might need to use "gmake" instead of
@@ -2381,6 +2401,22 @@
CROSS_COMPILE=' ' MAKEALL
+When using the MAKEALL script, the default behaviour is to build U-Boot
+in the source directory. This location can be changed by setting the
+BUILD_DIR environment variable. Also, for each target built, the MAKEALL
+script saves two log files (<target>.ERR and <target>.MAKEALL) in the
+<source dir>/LOG directory. This default location can be changed by
+setting the MAKEALL_LOGDIR environment variable. For example:
+
+ export BUILD_DIR=/tmp/build
+ export MAKEALL_LOGDIR=/tmp/log
+ CROSS_COMPILE=ppc_8xx- MAKEALL
+
+With the above settings build objects are saved in the /tmp/build, log
+files are saved in the /tmp/log and the source tree remains clean during
+the whole build process.
+
+
See also "U-Boot Porting Guide" below.
@@ -3523,12 +3559,19 @@
-----------------
All contributions to U-Boot should conform to the Linux kernel
-coding style; see the file "Documentation/CodingStyle" in your Linux
-kernel source directory.
+coding style; see the file "Documentation/CodingStyle" and the script
+"scripts/Lindent" in your Linux kernel source directory. In sources
+originating from U-Boot a style corresponding to "Lindent -pcs" (adding
+spaces before parameters to function calls) is actually used.
+
+Source files originating from a different project (for example the
+MTD subsystem) are generally exempt from these guidelines and are not
+reformated to ease subsequent migration to newer versions of those
+sources.
-Please note that U-Boot is implemented in C (and to some small parts
-in Assembler); no C++ is used, so please do not use C++ style
-comments (//) in your code.
+Please note that U-Boot is implemented in C (and to some small parts in
+Assembler); no C++ is used, so please do not use C++ style comments (//)
+in your code.
Please also stick to the following formatting rules:
- remove any trailing white space
diff --git a/board/AtmarkTechno/suzaku/Makefile b/board/AtmarkTechno/suzaku/Makefile
index 7a17067..109cec2 100644
--- a/board/AtmarkTechno/suzaku/Makefile
+++ b/board/AtmarkTechno/suzaku/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2003
+# (C) Copyright 2003-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/BuS/EB+MCF-EV123/Makefile b/board/BuS/EB+MCF-EV123/Makefile
index 0596572..ed3ac07 100644
--- a/board/BuS/EB+MCF-EV123/Makefile
+++ b/board/BuS/EB+MCF-EV123/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2003
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o cfm_flash.o flash.o VCxK.o
+COBJS = $(BOARD).o cfm_flash.o flash.o VCxK.o
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/BuS/EB+MCF-EV123/textbase.mk b/board/BuS/EB+MCF-EV123/textbase.mk
index 10106f4..ecde6ed 100644
--- a/board/BuS/EB+MCF-EV123/textbase.mk
+++ b/board/BuS/EB+MCF-EV123/textbase.mk
@@ -1 +1 @@
-TEXT_BASE = 0xF0000000
+TEXT_BASE = 0xFFE00000
diff --git a/board/LEOX/elpt860/Makefile b/board/LEOX/elpt860/Makefile
index 3e73163..2928691 100644
--- a/board/LEOX/elpt860/Makefile
+++ b/board/LEOX/elpt860/Makefile
@@ -4,6 +4,9 @@
# Copyright (C) 2000, 2001, 2002, 2003
# The LEOX team <team@leox.org>, http://www.leox.org
#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
# LEOX.org is about the development of free hardware and software resources
# for system on chip.
#
@@ -31,18 +34,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/MAI/AmigaOneG3SE/Makefile b/board/MAI/AmigaOneG3SE/Makefile
index b1247fe..cb6ea26 100644
--- a/board/MAI/AmigaOneG3SE/Makefile
+++ b/board/MAI/AmigaOneG3SE/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2002
+# (C) Copyright 2002-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -22,8 +22,12 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../menu)
+$(shell mkdir -p $(obj)../bios_emulator)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
COBJS = $(BOARD).o articiaS.o flash.o serial.o smbus.o articiaS_pci.o \
via686.o i8259.o ../bios_emulator/x86interface.o \
@@ -31,26 +35,29 @@
interrupts.o ps2kbd.o video.o usb_uhci.o enet.o \
../menu/cmd_menu.o cmd_boota.o nvram.o
-AOBJS = board_asm_init.o memio.o
-
-OBJS = $(COBJS) $(AOBJS)
+SOBJS = board_asm_init.o memio.o
EMUDIR = ../bios_emulator/scitech/src/x86emu/
EMUOBJ = $(EMUDIR)decode.o $(EMUDIR)ops2.o $(EMUDIR)fpu.o $(EMUDIR)prim_ops.o \
$(EMUDIR)ops.o $(EMUDIR)sys.o
-EMUSRC = $(EMUOBJ:.o=.c)
+EMUSRC = $(EMUOBJ:.o=.c)
-$(LIB): .depend $(OBJS) $(EMUSRC)
- make libx86emu.a -C ../bios_emulator/scitech/src/x86emu -f makefile.uboot CROSS_COMPILE=$(CROSS_COMPILE)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+EMUOBJ := $(addprefix $(obj),$(EMUOBJ))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(EMUSRC)
+ make $(obj)libx86emu.a -C ../bios_emulator/scitech/src/x86emu -f makefile.uboot CROSS_COMPILE=$(CROSS_COMPILE)
-rm $(LIB)
- $(AR) crv $@ $(OBJS) $(EMUOBJ)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) $(EMUOBJ)
#########################################################################
-.depend: Makefile $(AOBJS:.o=.S) $(COBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(AOBJS:.o=.S) $(COBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/Marvell/db64360/Makefile b/board/Marvell/db64360/Makefile
index 768ccdd..641a0ab 100644
--- a/board/Marvell/db64360/Makefile
+++ b/board/Marvell/db64360/Makefile
@@ -1,4 +1,7 @@
#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
# (C) Copyright 2001
# Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
#
@@ -22,23 +25,30 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
SOBJS = ../common/misc.o
-OBJS = $(BOARD).o ../common/flash.o ../common/serial.o ../common/memory.o pci.o \
+COBJS = $(BOARD).o ../common/flash.o ../common/serial.o ../common/memory.o pci.o \
mv_eth.o ../common/ns16550.o mpsc.o ../common/i2c.o \
sdram_init.o ../common/intel_flash.o
-$(LIB): .depend $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/Marvell/db64460/Makefile b/board/Marvell/db64460/Makefile
index 768ccdd..641a0ab 100644
--- a/board/Marvell/db64460/Makefile
+++ b/board/Marvell/db64460/Makefile
@@ -1,4 +1,7 @@
#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
# (C) Copyright 2001
# Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
#
@@ -22,23 +25,30 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
SOBJS = ../common/misc.o
-OBJS = $(BOARD).o ../common/flash.o ../common/serial.o ../common/memory.o pci.o \
+COBJS = $(BOARD).o ../common/flash.o ../common/serial.o ../common/memory.o pci.o \
mv_eth.o ../common/ns16550.o mpsc.o ../common/i2c.o \
sdram_init.o ../common/intel_flash.o
-$(LIB): .depend $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/RPXClassic/Makefile b/board/RPXClassic/Makefile
index 93907ba..19ea3ed 100644
--- a/board/RPXClassic/Makefile
+++ b/board/RPXClassic/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o eccx.o
+COBJS = $(BOARD).o flash.o eccx.o
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/RPXlite/Makefile b/board/RPXlite/Makefile
index 13ce9fc..cf07cf4 100644
--- a/board/RPXlite/Makefile
+++ b/board/RPXlite/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/RPXlite_dw/Makefile b/board/RPXlite_dw/Makefile
index d457020..cf07cf4 100644
--- a/board/RPXlite_dw/Makefile
+++ b/board/RPXlite_dw/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2004
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/RRvision/Makefile b/board/RRvision/Makefile
index fdc6fd5..cf07cf4 100644
--- a/board/RRvision/Makefile
+++ b/board/RRvision/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2002
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/a3000/Makefile b/board/a3000/Makefile
index 5fde362..d3db1a9 100644
--- a/board/a3000/Makefile
+++ b/board/a3000/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/adder/Makefile b/board/adder/Makefile
index 9123a80..b2ffd28 100644
--- a/board/adder/Makefile
+++ b/board/adder/Makefile
@@ -1,4 +1,7 @@
#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
# Copyright (C) 2004 Arabella Software Ltd.
# Yuli Barcohen <yuli@arabellasw.com>
#
@@ -23,12 +26,16 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := $(BOARD).o
+COBJS := $(BOARD).o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -38,9 +45,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/adsvix/Makefile b/board/adsvix/Makefile
index 24d5d06..214c7db 100644
--- a/board/adsvix/Makefile
+++ b/board/adsvix/Makefile
@@ -1,6 +1,5 @@
-
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -24,13 +23,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := adsvix.o pcmcia.o
+COBJS := adsvix.o pcmcia.o
SOBJS := lowlevel_init.o pxavoltage.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -40,9 +43,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/alaska/Makefile b/board/alaska/Makefile
index a4c1d2e..27475ea 100644
--- a/board/alaska/Makefile
+++ b/board/alaska/Makefile
@@ -1,4 +1,5 @@
-# (C) Copyright 2003-2005
+#
+# (C) Copyright 2003-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -22,12 +23,16 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := $(BOARD).o flash.o
+COBJS := $(BOARD).o flash.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -37,9 +42,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/altera/dk1c20/Makefile b/board/altera/dk1c20/Makefile
index 9182a4e..6af8389 100644
--- a/board/altera/dk1c20/Makefile
+++ b/board/altera/dk1c20/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001-2004
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,14 +23,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := $(BOARD).o flash.o misc.o
-
+COBJS := $(BOARD).o flash.o misc.o
SOBJS = vectors.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $^
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -40,9 +43,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/altera/dk1s10/Makefile b/board/altera/dk1s10/Makefile
index 9182a4e..6af8389 100644
--- a/board/altera/dk1s10/Makefile
+++ b/board/altera/dk1s10/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001-2004
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,14 +23,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := $(BOARD).o flash.o misc.o
-
+COBJS := $(BOARD).o flash.o misc.o
SOBJS = vectors.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $^
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -40,9 +43,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/altera/ep1c20/Makefile b/board/altera/ep1c20/Makefile
index a92b258..7a8caf7 100644
--- a/board/altera/ep1c20/Makefile
+++ b/board/altera/ep1c20/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001-2004
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -12,7 +12,7 @@
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
@@ -22,17 +22,22 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
COMOBJS := ../common/AMDLV065D.o ../common/epled.o
-OBJS := $(BOARD).o $(COMOBJS)
+COBJS := $(BOARD).o $(COMOBJS)
-SOBJS =
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $^
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -42,9 +47,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/altera/ep1s10/Makefile b/board/altera/ep1s10/Makefile
index a92b258..7a8caf7 100644
--- a/board/altera/ep1s10/Makefile
+++ b/board/altera/ep1s10/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001-2004
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -12,7 +12,7 @@
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
@@ -22,17 +22,22 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
COMOBJS := ../common/AMDLV065D.o ../common/epled.o
-OBJS := $(BOARD).o $(COMOBJS)
+COBJS := $(BOARD).o $(COMOBJS)
-SOBJS =
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $^
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -42,9 +47,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/altera/ep1s40/Makefile b/board/altera/ep1s40/Makefile
index a92b258..7a8caf7 100644
--- a/board/altera/ep1s40/Makefile
+++ b/board/altera/ep1s40/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001-2004
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -12,7 +12,7 @@
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
@@ -22,17 +22,22 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
COMOBJS := ../common/AMDLV065D.o ../common/epled.o
-OBJS := $(BOARD).o $(COMOBJS)
+COBJS := $(BOARD).o $(COMOBJS)
-SOBJS =
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $^
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -42,9 +47,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/amcc/bamboo/Makefile b/board/amcc/bamboo/Makefile
index 5654f91..5da96e9 100644
--- a/board/amcc/bamboo/Makefile
+++ b/board/amcc/bamboo/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2002
+# (C) Copyright 2002-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,14 +23,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o
-OBJS += flash.o
+COBJS = $(BOARD).o flash.o
SOBJS = init.o
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -40,9 +43,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/amcc/bubinga/Makefile b/board/amcc/bubinga/Makefile
index f5bda55..50fecc6 100644
--- a/board/amcc/bubinga/Makefile
+++ b/board/amcc/bubinga/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,12 +23,16 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -38,9 +42,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/amcc/common/flash.c b/board/amcc/common/flash.c
index a0acbba..e6429ec 100644
--- a/board/amcc/common/flash.c
+++ b/board/amcc/common/flash.c
@@ -35,7 +35,7 @@
#include <ppc4xx.h>
#include <asm/processor.h>
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
/*-----------------------------------------------------------------------
* Functions
@@ -76,7 +76,7 @@
case FLASH_MAN_SST:
printf("SST ");
break;
- case FLASH_MAN_MX:
+ case FLASH_MAN_MX:
printf ("MACRONIX ");
break;
default:
@@ -223,75 +223,75 @@
return (0); /* no or unknown flash */
}
- value = addr2[1]; /* device ID */
+ value = addr2[1]; /* device ID */
DEBUGF("\nFLASH DEVICEID: %x\n", value);
switch (value) {
case (CFG_FLASH_WORD_SIZE) AMD_ID_LV040B:
info->flash_id += FLASH_AM040;
info->sector_count = 8;
- info->size = 0x0080000; /* => 512 ko */
+ info->size = 0x0080000; /* => 512 KiB */
break;
case (CFG_FLASH_WORD_SIZE) AMD_ID_F040B:
info->flash_id += FLASH_AM040;
info->sector_count = 8;
- info->size = 0x0080000; /* => 512 ko */
+ info->size = 0x0080000; /* => 512 KiB */
break;
case (CFG_FLASH_WORD_SIZE) STM_ID_M29W040B:
info->flash_id += FLASH_AM040;
info->sector_count = 8;
- info->size = 0x0080000; /* => 512 ko */
+ info->size = 0x0080000; /* => 512 KiB */
break;
case (CFG_FLASH_WORD_SIZE) AMD_ID_F016D:
info->flash_id += FLASH_AMD016;
info->sector_count = 32;
- info->size = 0x00200000;
- break; /* => 2 MB */
+ info->size = 0x00200000; /* => 2 MiB */
+ break;
case (CFG_FLASH_WORD_SIZE) AMD_ID_LV033C:
info->flash_id += FLASH_AMDLV033C;
info->sector_count = 64;
- info->size = 0x00400000;
- break; /* => 4 MB */
+ info->size = 0x00400000; /* => 4 MiB */
+ break;
case (CFG_FLASH_WORD_SIZE) AMD_ID_LV400T:
info->flash_id += FLASH_AM400T;
info->sector_count = 11;
- info->size = 0x00080000;
- break; /* => 0.5 MB */
+ info->size = 0x00080000; /* => 512 KiB */
+ break;
case (CFG_FLASH_WORD_SIZE) AMD_ID_LV400B:
info->flash_id += FLASH_AM400B;
info->sector_count = 11;
- info->size = 0x00080000;
- break; /* => 0.5 MB */
+ info->size = 0x00080000; /* => 512 KiB */
+ break;
case (CFG_FLASH_WORD_SIZE) AMD_ID_LV800T:
info->flash_id += FLASH_AM800T;
info->sector_count = 19;
- info->size = 0x00100000;
- break; /* => 1 MB */
+ info->size = 0x00100000; /* => 1 MiB */
+ break;
case (CFG_FLASH_WORD_SIZE) AMD_ID_LV800B:
info->flash_id += FLASH_AM800B;
info->sector_count = 19;
- info->size = 0x00100000;
- break; /* => 1 MB */
+ info->size = 0x00100000; /* => 1 MiB */
+ break;
case (CFG_FLASH_WORD_SIZE) AMD_ID_LV160T:
info->flash_id += FLASH_AM160T;
info->sector_count = 35;
- info->size = 0x00200000;
- break; /* => 2 MB */
+ info->size = 0x00200000; /* => 2 MiB */
+ break;
case (CFG_FLASH_WORD_SIZE) AMD_ID_LV160B:
info->flash_id += FLASH_AM160B;
info->sector_count = 35;
- info->size = 0x00200000;
- break; /* => 2 MB */
+ info->size = 0x00200000; /* => 2 MiB */
+ break;
default:
info->flash_id = FLASH_UNKNOWN;
@@ -306,7 +306,7 @@
info->start[i] = base + (i * 0x00010000);
} else {
if (info->flash_id & FLASH_BTYPE) {
- /* set sector offsets for bottom boot block type */
+ /* set sector offsets for bottom boot block type */
info->start[0] = base + 0x00000000;
info->start[1] = base + 0x00004000;
info->start[2] = base + 0x00006000;
@@ -316,7 +316,7 @@
base + (i * 0x00010000) - 0x00030000;
}
} else {
- /* set sector offsets for top boot block type */
+ /* set sector offsets for top boot block type */
i = info->sector_count - 1;
info->start[i--] = base + info->size - 0x00004000;
info->start[i--] = base + info->size - 0x00006000;
@@ -666,7 +666,7 @@
return (0); /* no or unknown flash */
}
- value = addr2[1]; /* device ID */
+ value = addr2[1]; /* device ID */
DEBUGF("\nFLASH DEVICEID: %x\n", value);
@@ -675,17 +675,17 @@
case (CFG_FLASH_WORD_SIZE)AMD_ID_LV320T:
info->flash_id += FLASH_AM320T;
info->sector_count = 71;
- info->size = 0x00400000; break; /* => 4 MB */
+ info->size = 0x00400000; break; /* => 4 MiB */
case (CFG_FLASH_WORD_SIZE)AMD_ID_LV320B:
info->flash_id += FLASH_AM320B;
info->sector_count = 71;
- info->size = 0x00400000; break; /* => 4 MB */
+ info->size = 0x00400000; break; /* => 4 MiB */
case (CFG_FLASH_WORD_SIZE)STM_ID_29W320DT:
info->flash_id += FLASH_STMW320DT;
info->sector_count = 67;
- info->size = 0x00400000; break; /* => 4 MB */
+ info->size = 0x00400000; break; /* => 4 MiB */
case (CFG_FLASH_WORD_SIZE)MX_ID_LV320T:
info->flash_id += FLASH_MXLV320T;
@@ -743,7 +743,7 @@
info->start[i] = base + i * 0x00010000;
} else {
if (info->flash_id & FLASH_BTYPE) {
- /* set sector offsets for bottom boot block type */
+ /* set sector offsets for bottom boot block type */
info->start[0] = base + 0x00000000;
info->start[1] = base + 0x00004000;
info->start[2] = base + 0x00006000;
@@ -753,7 +753,7 @@
base + (i * 0x00010000) - 0x00030000;
}
} else {
- /* set sector offsets for top boot block type */
+ /* set sector offsets for top boot block type */
i = info->sector_count - 1;
info->start[i--] = base + info->size - 0x00004000;
info->start[i--] = base + info->size - 0x00006000;
diff --git a/board/amcc/ebony/Makefile b/board/amcc/ebony/Makefile
index 4a3927b..5da96e9 100644
--- a/board/amcc/ebony/Makefile
+++ b/board/amcc/ebony/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2002
+# (C) Copyright 2002-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,13 +23,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
SOBJS = init.o
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -39,9 +43,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/amcc/luan/Makefile b/board/amcc/luan/Makefile
index 5654f91..5da96e9 100644
--- a/board/amcc/luan/Makefile
+++ b/board/amcc/luan/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2002
+# (C) Copyright 2002-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,14 +23,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o
-OBJS += flash.o
+COBJS = $(BOARD).o flash.o
SOBJS = init.o
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -40,9 +43,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/amcc/ocotea/Makefile b/board/amcc/ocotea/Makefile
index af223d2..a758650 100644
--- a/board/amcc/ocotea/Makefile
+++ b/board/amcc/ocotea/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2002
+# (C) Copyright 2002-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,13 +23,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
SOBJS = init.o
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -39,9 +43,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/amcc/ocotea/init.S b/board/amcc/ocotea/init.S
index e33427a..7e0b132 100644
--- a/board/amcc/ocotea/init.S
+++ b/board/amcc/ocotea/init.S
@@ -1,30 +1,31 @@
/*
-* Copyright (C) 2002 Scott McNutt <smcnutt@artesyncp.com>
-*
-* See file CREDITS for list of people who contributed to this
-* project.
-*
-* This program is free software; you can redistribute it and/or
-* modify it under the terms of the GNU General Public License as
-* published by the Free Software Foundation; either version 2 of
-* the License, or (at your option) any later version.
-*
-* This program is distributed in the hope that it will be useful,
-* but WITHOUT ANY WARRANTY; without even the implied warranty of
-* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-* GNU General Public License for more details.
-*
-* You should have received a copy of the GNU General Public License
-* along with this program; if not, write to the Free Software
-* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-* MA 02111-1307 USA
-*/
+ * Copyright (C) 2002 Scott McNutt <smcnutt@artesyncp.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
#include <ppc_asm.tmpl>
#include <config.h>
/* General */
#define TLB_VALID 0x00000200
+#define _256M 0x10000000
/* Supported page sizes */
@@ -32,10 +33,11 @@
#define SZ_4K 0x00000010
#define SZ_16K 0x00000020
#define SZ_64K 0x00000030
-#define SZ_256K 0x00000040
+#define SZ_256K 0x00000040
#define SZ_1M 0x00000050
+#define SZ_8M 0x00000060
#define SZ_16M 0x00000070
-#define SZ_256M 0x00000090
+#define SZ_256M 0x00000090
/* Storage attributes */
#define SA_W 0x00000800 /* Write-through */
@@ -54,7 +56,7 @@
#define EPN(e) ((e) & 0xfffffc00)
#define TLB0(epn,sz) ( (EPN((epn)) | (sz) | TLB_VALID ) )
#define TLB1(rpn,erpn) ( ((rpn)&0xfffffc00) | (erpn) )
-#define TLB2(a) ( (a)&0x00000fbf )
+#define TLB2(a) ( (a)&0x00000fbf )
#define tlbtab_start\
mflr r1 ;\
@@ -86,12 +88,14 @@
tlbtab:
tlbtab_start
- tlbentry( 0xf0000000, SZ_256M, 0xf0000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I)
- tlbentry( CFG_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_R|AC_W|SA_G|SA_I)
+ tlbentry( 0xf0000000, SZ_256M, 0xf0000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
+ tlbentry( CFG_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_R|AC_W|SA_G|SA_I )
tlbentry( CFG_ISRAM_BASE, SZ_4K, 0x80000000, 0, AC_R|AC_W|AC_X )
tlbentry( CFG_ISRAM_BASE + 0x1000, SZ_4K, 0x80001000, 0, AC_R|AC_W|AC_X )
tlbentry( CFG_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
- tlbentry( CFG_SDRAM_BASE+0x10000000, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
+ tlbentry( CFG_SDRAM_BASE + 0x10000000, SZ_256M, 0x10000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
+ tlbentry( CFG_SDRAM_BASE + 0x20000000, SZ_256M, 0x20000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
+ tlbentry( CFG_SDRAM_BASE + 0x30000000, SZ_256M, 0x30000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
tlbentry( CFG_PCI_BASE, SZ_256M, 0x00000000, 2, AC_R|AC_W|SA_G|SA_I )
tlbentry( CFG_PCI_MEMBASE, SZ_256M, 0x00000000, 3, AC_R|AC_W|SA_G|SA_I )
tlbtab_end
diff --git a/board/amcc/sequoia/Makefile b/board/amcc/sequoia/Makefile
new file mode 100644
index 0000000..9c1be0e
--- /dev/null
+++ b/board/amcc/sequoia/Makefile
@@ -0,0 +1,52 @@
+#
+# (C) Copyright 2002-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+include $(TOPDIR)/include/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS = $(BOARD).o sdram.o
+SOBJS = init.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/amcc/sequoia/config.mk b/board/amcc/sequoia/config.mk
new file mode 100644
index 0000000..7713a72
--- /dev/null
+++ b/board/amcc/sequoia/config.mk
@@ -0,0 +1,41 @@
+#
+# (C) Copyright 2002
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+#
+# AMCC 440EPx Reference Platform (Sequoia) board
+#
+
+sinclude $(TOPDIR)/board/$(BOARDDIR)/config.tmp
+
+ifndef TEXT_BASE
+TEXT_BASE = 0xFFFA0000
+endif
+
+PLATFORM_CPPFLAGS += -DCONFIG_440=1
+
+ifeq ($(debug),1)
+PLATFORM_CPPFLAGS += -DDEBUG
+endif
+
+ifeq ($(dbcr),1)
+PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
+endif
diff --git a/board/amcc/sequoia/init.S b/board/amcc/sequoia/init.S
new file mode 100644
index 0000000..3d4ac85
--- /dev/null
+++ b/board/amcc/sequoia/init.S
@@ -0,0 +1,157 @@
+/*
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <ppc_asm.tmpl>
+#include <config.h>
+
+/* General */
+#define TLB_VALID 0x00000200
+#define _256M 0x10000000
+
+/* Supported page sizes */
+
+#define SZ_1K 0x00000000
+#define SZ_4K 0x00000010
+#define SZ_16K 0x00000020
+#define SZ_64K 0x00000030
+#define SZ_256K 0x00000040
+#define SZ_1M 0x00000050
+#define SZ_8M 0x00000060
+#define SZ_16M 0x00000070
+#define SZ_256M 0x00000090
+
+/* Storage attributes */
+#define SA_W 0x00000800 /* Write-through */
+#define SA_I 0x00000400 /* Caching inhibited */
+#define SA_M 0x00000200 /* Memory coherence */
+#define SA_G 0x00000100 /* Guarded */
+#define SA_E 0x00000080 /* Endian */
+
+/* Access control */
+#define AC_X 0x00000024 /* Execute */
+#define AC_W 0x00000012 /* Write */
+#define AC_R 0x00000009 /* Read */
+
+/* Some handy macros */
+
+#define EPN(e) ((e) & 0xfffffc00)
+#define TLB0(epn,sz) ( (EPN((epn)) | (sz) | TLB_VALID ) )
+#define TLB1(rpn,erpn) ( ((rpn)&0xfffffc00) | (erpn) )
+#define TLB2(a) ( (a)&0x00000fbf )
+
+#define tlbtab_start\
+ mflr r1 ;\
+ bl 0f ;
+
+#define tlbtab_end\
+ .long 0, 0, 0 ; \
+0: mflr r0 ; \
+ mtlr r1 ; \
+ blr ;
+
+#define tlbentry(epn,sz,rpn,erpn,attr)\
+ .long TLB0(epn,sz),TLB1(rpn,erpn),TLB2(attr)
+
+
+/**************************************************************************
+ * TLB TABLE
+ *
+ * This table is used by the cpu boot code to setup the initial tlb
+ * entries. Rather than make broad assumptions in the cpu source tree,
+ * this table lets each board set things up however they like.
+ *
+ * Pointer to the table is returned in r1
+ *
+ *************************************************************************/
+ .section .bootpg,"ax"
+ .globl tlbtab
+
+tlbtab:
+ tlbtab_start
+
+ /*
+ * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the
+ * speed up boot process. It is patched after relocation to enable SA_I
+ */
+#ifndef CONFIG_NAND_SPL
+ tlbentry( CFG_BOOT_BASE_ADDR, SZ_256M, CFG_BOOT_BASE_ADDR, 1, AC_R|AC_W|AC_X|SA_G )
+#else
+ tlbentry( CFG_NAND_BOOT_SPL_SRC, SZ_4K, CFG_NAND_BOOT_SPL_SRC, 1, AC_R|AC_W|AC_X|SA_G )
+#endif
+
+ /* TLB-entry for DDR SDRAM (Up to 2GB) */
+ tlbentry( CFG_SDRAM_BASE, SZ_256M, CFG_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
+
+#ifdef CFG_INIT_RAM_DCACHE
+ /* TLB-entry for init-ram in dcache (SA_I must be turned off!) */
+ tlbentry( CFG_INIT_RAM_ADDR, SZ_64K, CFG_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G )
+#endif
+
+ /* TLB-entry for PCI Memory */
+ tlbentry( CFG_PCI_MEMBASE, SZ_256M, CFG_PCI_MEMBASE, 1, AC_R|AC_W|SA_G|SA_I )
+ tlbentry( CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 1, AC_R|AC_W|SA_G|SA_I )
+ tlbentry( CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 1, AC_R|AC_W|SA_G|SA_I )
+ tlbentry( CFG_PCI_MEMBASE3, SZ_256M, CFG_PCI_MEMBASE3, 1, AC_R|AC_W|SA_G|SA_I )
+
+ /* TLB-entry for EBC */
+ tlbentry( CFG_BCSR_BASE, SZ_1K, CFG_BCSR_BASE, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
+
+ /* TLB-entry for NAND */
+ tlbentry( CFG_NAND_ADDR, SZ_1K, CFG_NAND_ADDR, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
+
+ /* TLB-entry for Internal Registers & OCM */
+ tlbentry( 0xe0000000, SZ_16M, 0xe0000000, 0, AC_R|AC_W|AC_X|SA_I )
+
+ /*TLB-entry PCI registers*/
+ tlbentry( 0xEEC00000, SZ_1K, 0xEEC00000, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
+
+ /* TLB-entry for peripherals */
+ tlbentry( 0xEF000000, SZ_16M, 0xEF000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I)
+
+ tlbtab_end
+
+#if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
+ /*
+ * For NAND booting the first TLB has to be reconfigured to full size
+ * and with caching disabled after running from RAM!
+ */
+#define TLB00 TLB0(CFG_BOOT_BASE_ADDR, SZ_256M)
+#define TLB01 TLB1(CFG_BOOT_BASE_ADDR, 1)
+#define TLB02 TLB2(AC_R|AC_W|AC_X|SA_G|SA_I)
+
+ .globl reconfig_tlb0
+reconfig_tlb0:
+ sync
+ isync
+ addi r4,r0,0x0000 /* TLB entry #0 */
+ lis r5,TLB00@h
+ ori r5,r5,TLB00@l
+ tlbwe r5,r4,0x0000 /* Save it out */
+ lis r5,TLB01@h
+ ori r5,r5,TLB01@l
+ tlbwe r5,r4,0x0001 /* Save it out */
+ lis r5,TLB02@h
+ ori r5,r5,TLB02@l
+ tlbwe r5,r4,0x0002 /* Save it out */
+ sync
+ isync
+ blr
+#endif
diff --git a/board/amcc/sequoia/sdram.c b/board/amcc/sequoia/sdram.c
new file mode 100644
index 0000000..53f728d
--- /dev/null
+++ b/board/amcc/sequoia/sdram.c
@@ -0,0 +1,77 @@
+/*
+ * (C) Copyright 2006
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <ppc440.h>
+
+/*************************************************************************
+ *
+ * initdram -- 440EPx's DDR controller is a DENALI Core
+ *
+ ************************************************************************/
+long int initdram (int board_type)
+{
+#if !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
+ volatile ulong val;
+
+ mtsdram(DDR0_02, 0x00000000);
+
+ mtsdram(DDR0_00, 0x0000190A);
+ mtsdram(DDR0_01, 0x01000000);
+ mtsdram(DDR0_03, 0x02030602);
+ mtsdram(DDR0_04, 0x13030300);
+ mtsdram(DDR0_05, 0x0202050E);
+ mtsdram(DDR0_06, 0x0104C823);
+ mtsdram(DDR0_07, 0x000D0100);
+ mtsdram(DDR0_08, 0x02360001);
+ mtsdram(DDR0_09, 0x00011D5F);
+ mtsdram(DDR0_10, 0x00000300);
+ mtsdram(DDR0_11, 0x0027C800);
+ mtsdram(DDR0_12, 0x00000003);
+ mtsdram(DDR0_14, 0x00000000);
+ mtsdram(DDR0_17, 0x19000000);
+ mtsdram(DDR0_18, 0x19191919);
+ mtsdram(DDR0_19, 0x19191919);
+ mtsdram(DDR0_20, 0x0B0B0B0B);
+ mtsdram(DDR0_21, 0x0B0B0B0B);
+ mtsdram(DDR0_22, 0x00267F0B);
+ mtsdram(DDR0_23, 0x00000000);
+ mtsdram(DDR0_24, 0x01010002);
+ mtsdram(DDR0_26, 0x5B260181);
+ mtsdram(DDR0_27, 0x0000682B);
+ mtsdram(DDR0_28, 0x00000000);
+ mtsdram(DDR0_31, 0x00000000);
+ mtsdram(DDR0_42, 0x01000006);
+ mtsdram(DDR0_43, 0x050A0200);
+ mtsdram(DDR0_44, 0x00000005);
+ mtsdram(DDR0_02, 0x00000001);
+
+ /*
+ * Wait for DCC master delay line to finish calibration
+ */
+ mfsdram(DDR0_17, val);
+ while (((val >> 8) & 0x000007f) == 0) {
+ mfsdram(DDR0_17, val);
+ }
+#endif /* #ifndef CONFIG_NAND_U_BOOT */
+
+ return (CFG_MBYTES_SDRAM << 20);
+}
diff --git a/board/amcc/sequoia/sequoia.c b/board/amcc/sequoia/sequoia.c
new file mode 100644
index 0000000..ccf6f0c
--- /dev/null
+++ b/board/amcc/sequoia/sequoia.c
@@ -0,0 +1,560 @@
+/*
+ * (C) Copyright 2006
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * (C) Copyright 2006
+ * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com
+ * Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <ppc440.h>
+#include "sequoia.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+
+int board_early_init_f(void)
+{
+ unsigned long sdr0_cust0;
+ unsigned long sdr0_pfc1, sdr0_pfc2;
+ register uint reg;
+
+ mtdcr(ebccfga, xbcfg);
+ mtdcr(ebccfgd, 0xb8400000);
+
+ /*--------------------------------------------------------------------
+ * Setup the GPIO pins
+ *-------------------------------------------------------------------*/
+ /* test-only: take GPIO init from pcs440ep ???? in config file */
+ out32(GPIO0_OR, 0x00000000);
+ out32(GPIO0_TCR, 0x0000000f);
+ out32(GPIO0_OSRL, 0x50015400);
+ out32(GPIO0_OSRH, 0x550050aa);
+ out32(GPIO0_TSRL, 0x50015400);
+ out32(GPIO0_TSRH, 0x55005000);
+ out32(GPIO0_ISR1L, 0x50000000);
+ out32(GPIO0_ISR1H, 0x00000000);
+ out32(GPIO0_ISR2L, 0x00000000);
+ out32(GPIO0_ISR2H, 0x00000100);
+ out32(GPIO0_ISR3L, 0x00000000);
+ out32(GPIO0_ISR3H, 0x00000000);
+
+ out32(GPIO1_OR, 0x00000000);
+ out32(GPIO1_TCR, 0xc2000000);
+ out32(GPIO1_OSRL, 0x5c280000);
+ out32(GPIO1_OSRH, 0x00000000);
+ out32(GPIO1_TSRL, 0x0c000000);
+ out32(GPIO1_TSRH, 0x00000000);
+ out32(GPIO1_ISR1L, 0x00005550);
+ out32(GPIO1_ISR1H, 0x00000000);
+ out32(GPIO1_ISR2L, 0x00050000);
+ out32(GPIO1_ISR2H, 0x00000000);
+ out32(GPIO1_ISR3L, 0x01400000);
+ out32(GPIO1_ISR3H, 0x00000000);
+
+ /*--------------------------------------------------------------------
+ * Setup the interrupt controller polarities, triggers, etc.
+ *-------------------------------------------------------------------*/
+ mtdcr(uic0sr, 0xffffffff); /* clear all */
+ mtdcr(uic0er, 0x00000000); /* disable all */
+ mtdcr(uic0cr, 0x00000005); /* ATI & UIC1 crit are critical */
+ mtdcr(uic0pr, 0xfffff7ff); /* per ref-board manual */
+ mtdcr(uic0tr, 0x00000000); /* per ref-board manual */
+ mtdcr(uic0vr, 0x00000000); /* int31 highest, base=0x000 */
+ mtdcr(uic0sr, 0xffffffff); /* clear all */
+
+ mtdcr(uic1sr, 0xffffffff); /* clear all */
+ mtdcr(uic1er, 0x00000000); /* disable all */
+ mtdcr(uic1cr, 0x00000000); /* all non-critical */
+ mtdcr(uic1pr, 0xffffffff); /* per ref-board manual */
+ mtdcr(uic1tr, 0x00000000); /* per ref-board manual */
+ mtdcr(uic1vr, 0x00000000); /* int31 highest, base=0x000 */
+ mtdcr(uic1sr, 0xffffffff); /* clear all */
+
+ mtdcr(uic2sr, 0xffffffff); /* clear all */
+ mtdcr(uic2er, 0x00000000); /* disable all */
+ mtdcr(uic2cr, 0x00000000); /* all non-critical */
+ mtdcr(uic2pr, 0xffffffff); /* per ref-board manual */
+ mtdcr(uic2tr, 0x00000000); /* per ref-board manual */
+ mtdcr(uic2vr, 0x00000000); /* int31 highest, base=0x000 */
+ mtdcr(uic2sr, 0xffffffff); /* clear all */
+
+ /* 50MHz tmrclk */
+ *(unsigned char *)(CFG_BCSR_BASE | 0x04) = 0x00;
+
+ /* clear write protects */
+ *(unsigned char *)(CFG_BCSR_BASE | 0x07) = 0x00;
+
+ /* enable Ethernet */
+ *(unsigned char *)(CFG_BCSR_BASE | 0x08) = 0x00;
+
+ /* enable USB device */
+ *(unsigned char *)(CFG_BCSR_BASE | 0x09) = 0x20;
+
+ /* select Ethernet pins */
+ mfsdr(SDR0_PFC1, sdr0_pfc1);
+ sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_SELECT_MASK) | SDR0_PFC1_SELECT_CONFIG_4;
+ mfsdr(SDR0_PFC2, sdr0_pfc2);
+ sdr0_pfc2 = (sdr0_pfc2 & ~SDR0_PFC2_SELECT_MASK) | SDR0_PFC2_SELECT_CONFIG_4;
+ mtsdr(SDR0_PFC2, sdr0_pfc2);
+ mtsdr(SDR0_PFC1, sdr0_pfc1);
+
+ /* PCI arbiter enabled */
+ mfsdr(sdr_pci0, reg);
+ mtsdr(sdr_pci0, 0x80000000 | reg);
+
+ /* setup NAND FLASH */
+ mfsdr(SDR0_CUST0, sdr0_cust0);
+ sdr0_cust0 = SDR0_CUST0_MUX_NDFC_SEL |
+ SDR0_CUST0_NDFC_ENABLE |
+ SDR0_CUST0_NDFC_BW_8_BIT |
+ SDR0_CUST0_NDFC_ARE_MASK |
+ (0x80000000 >> (28 + CFG_NAND_CS));
+ mtsdr(SDR0_CUST0, sdr0_cust0);
+
+ return 0;
+}
+
+/*---------------------------------------------------------------------------+
+ | misc_init_r.
+ +---------------------------------------------------------------------------*/
+int misc_init_r(void)
+{
+ uint pbcr;
+ int size_val = 0;
+#ifdef CONFIG_440EPX
+ unsigned long usb2d0cr = 0;
+ unsigned long usb2phy0cr, usb2h0cr = 0;
+ unsigned long sdr0_pfc1;
+ char *act = getenv("usbact");
+#endif
+
+ /*
+ * FLASH stuff...
+ */
+
+ /* Re-do sizing to get full correct info */
+#if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
+ mtdcr(ebccfga, pb3cr);
+#else
+ mtdcr(ebccfga, pb0cr);
+#endif
+ pbcr = mfdcr(ebccfgd);
+ switch (gd->bd->bi_flashsize) {
+ case 1 << 20:
+ size_val = 0;
+ break;
+ case 2 << 20:
+ size_val = 1;
+ break;
+ case 4 << 20:
+ size_val = 2;
+ break;
+ case 8 << 20:
+ size_val = 3;
+ break;
+ case 16 << 20:
+ size_val = 4;
+ break;
+ case 32 << 20:
+ size_val = 5;
+ break;
+ case 64 << 20:
+ size_val = 6;
+ break;
+ case 128 << 20:
+ size_val = 7;
+ break;
+ }
+ pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17);
+#if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
+ mtdcr(ebccfga, pb3cr);
+#else
+ mtdcr(ebccfga, pb0cr);
+#endif
+ mtdcr(ebccfgd, pbcr);
+
+ /* adjust flash start and offset */
+ gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
+ gd->bd->bi_flashoffset = 0;
+
+#ifdef CFG_ENV_IS_IN_FLASH
+ /* Monitor protection ON by default */
+ (void)flash_protect(FLAG_PROTECT_SET,
+ -CFG_MONITOR_LEN,
+ 0xffffffff,
+ &flash_info[0]);
+
+ /* Env protection ON by default */
+ (void)flash_protect(FLAG_PROTECT_SET,
+ CFG_ENV_ADDR_REDUND,
+ CFG_ENV_ADDR_REDUND + 2*CFG_ENV_SECT_SIZE - 1,
+ &flash_info[0]);
+#endif
+
+ /*
+ * USB suff...
+ */
+#ifdef CONFIG_440EPX
+ if (act == NULL || strcmp(act, "hostdev") == 0) {
+ /* SDR Setting */
+ mfsdr(SDR0_PFC1, sdr0_pfc1);
+ mfsdr(SDR0_USB0, usb2d0cr);
+ mfsdr(SDR0_USB2PHY0CR, usb2phy0cr);
+ mfsdr(SDR0_USB2H0CR, usb2h0cr);
+
+ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK;
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL; /*0*/
+ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_WDINT_MASK;
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_16BIT_30MHZ; /*1*/
+ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK;
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS; /*0*/
+ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK;
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST; /*1*/
+ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK;
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST; /*1*/
+
+ /* An 8-bit/60MHz interface is the only possible alternative
+ when connecting the Device to the PHY */
+ usb2h0cr = usb2h0cr &~SDR0_USB2H0CR_WDINT_MASK;
+ usb2h0cr = usb2h0cr | SDR0_USB2H0CR_WDINT_16BIT_30MHZ; /*1*/
+
+ /* To enable the USB 2.0 Device function through the UTMI interface */
+ usb2d0cr = usb2d0cr &~SDR0_USB2D0CR_USB2DEV_EBC_SEL_MASK;
+ usb2d0cr = usb2d0cr | SDR0_USB2D0CR_USB2DEV_SELECTION; /*1*/
+
+ sdr0_pfc1 = sdr0_pfc1 &~SDR0_PFC1_UES_MASK;
+ sdr0_pfc1 = sdr0_pfc1 | SDR0_PFC1_UES_USB2D_SEL; /*0*/
+
+ mtsdr(SDR0_PFC1, sdr0_pfc1);
+ mtsdr(SDR0_USB0, usb2d0cr);
+ mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
+ mtsdr(SDR0_USB2H0CR, usb2h0cr);
+
+ /*clear resets*/
+ udelay (1000);
+ mtsdr(SDR0_SRST1, 0x00000000);
+ udelay (1000);
+ mtsdr(SDR0_SRST0, 0x00000000);
+
+ printf("USB: Host(int phy) Device(ext phy)\n");
+
+ } else if (strcmp(act, "dev") == 0) {
+ /*-------------------PATCH-------------------------------*/
+ mfsdr(SDR0_USB2PHY0CR, usb2phy0cr);
+
+ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK;
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL; /*0*/
+ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK;
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS; /*0*/
+ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK;
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST; /*1*/
+ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK;
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST; /*1*/
+ mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
+
+ udelay (1000);
+ mtsdr(SDR0_SRST1, 0x672c6000);
+
+ udelay (1000);
+ mtsdr(SDR0_SRST0, 0x00000080);
+
+ udelay (1000);
+ mtsdr(SDR0_SRST1, 0x60206000);
+
+ *(unsigned int *)(0xe0000350) = 0x00000001;
+
+ udelay (1000);
+ mtsdr(SDR0_SRST1, 0x60306000);
+ /*-------------------PATCH-------------------------------*/
+
+ /* SDR Setting */
+ mfsdr(SDR0_USB2PHY0CR, usb2phy0cr);
+ mfsdr(SDR0_USB2H0CR, usb2h0cr);
+ mfsdr(SDR0_USB0, usb2d0cr);
+ mfsdr(SDR0_PFC1, sdr0_pfc1);
+
+ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK;
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL; /*0*/
+ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_WDINT_MASK;
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_8BIT_60MHZ; /*0*/
+ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK;
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PUREN; /*1*/
+ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK;
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_DEV; /*0*/
+ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK;
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_DEV; /*0*/
+
+ usb2h0cr = usb2h0cr &~SDR0_USB2H0CR_WDINT_MASK;
+ usb2h0cr = usb2h0cr | SDR0_USB2H0CR_WDINT_8BIT_60MHZ; /*0*/
+
+ usb2d0cr = usb2d0cr &~SDR0_USB2D0CR_USB2DEV_EBC_SEL_MASK;
+ usb2d0cr = usb2d0cr | SDR0_USB2D0CR_EBC_SELECTION; /*0*/
+
+ sdr0_pfc1 = sdr0_pfc1 &~SDR0_PFC1_UES_MASK;
+ sdr0_pfc1 = sdr0_pfc1 | SDR0_PFC1_UES_EBCHR_SEL; /*1*/
+
+ mtsdr(SDR0_USB2H0CR, usb2h0cr);
+ mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
+ mtsdr(SDR0_USB0, usb2d0cr);
+ mtsdr(SDR0_PFC1, sdr0_pfc1);
+
+ /*clear resets*/
+ udelay (1000);
+ mtsdr(SDR0_SRST1, 0x00000000);
+ udelay (1000);
+ mtsdr(SDR0_SRST0, 0x00000000);
+
+ printf("USB: Device(int phy)\n");
+ }
+#endif /* CONFIG_440EPX */
+
+ return 0;
+}
+
+int checkboard(void)
+{
+ char *s = getenv("serial#");
+
+#ifdef CONFIG_440EPX
+ printf("Board: Sequoia - AMCC PPC440EPx Evaluation Board");
+#else
+ printf("Board: Rainier - AMCC PPC440GRx Evaluation Board");
+#endif
+ if (s != NULL) {
+ puts(", serial# ");
+ puts(s);
+ }
+ putc('\n');
+
+ return (0);
+}
+
+#if defined(CFG_DRAM_TEST)
+int testdram(void)
+{
+ unsigned long *mem = (unsigned long *)0;
+ const unsigned long kend = (1024 / sizeof(unsigned long));
+ unsigned long k, n;
+
+ mtmsr(0);
+
+ for (k = 0; k < CFG_MBYTES_SDRAM;
+ ++k, mem += (1024 / sizeof(unsigned long))) {
+ if ((k & 1023) == 0) {
+ printf("%3d MB\r", k / 1024);
+ }
+
+ memset(mem, 0xaaaaaaaa, 1024);
+ for (n = 0; n < kend; ++n) {
+ if (mem[n] != 0xaaaaaaaa) {
+ printf("SDRAM test fails at: %08x\n",
+ (uint) & mem[n]);
+ return 1;
+ }
+ }
+
+ memset(mem, 0x55555555, 1024);
+ for (n = 0; n < kend; ++n) {
+ if (mem[n] != 0x55555555) {
+ printf("SDRAM test fails at: %08x\n",
+ (uint) & mem[n]);
+ return 1;
+ }
+ }
+ }
+ printf("SDRAM test passes\n");
+ return 0;
+}
+#endif
+
+/*************************************************************************
+ * pci_pre_init
+ *
+ * This routine is called just prior to registering the hose and gives
+ * the board the opportunity to check things. Returning a value of zero
+ * indicates that things are bad & PCI initialization should be aborted.
+ *
+ * Different boards may wish to customize the pci controller structure
+ * (add regions, override default access routines, etc) or perform
+ * certain pre-initialization actions.
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT)
+int pci_pre_init(struct pci_controller *hose)
+{
+ unsigned long addr;
+#if 0
+ /*--------------------------------------------------------------------------+
+ * Cactus is always configured as the host & requires the
+ * PCI arbiter to be enabled ???
+ *--------------------------------------------------------------------------*/
+ unsigned long strap;
+ mfsdr(sdr_sdstp1, strap);
+ if ((strap & SDR0_SDSTP1_PAE_MASK) == 0) {
+ printf("PCI: SDR0_STRP1[PAE] not set.\n");
+ printf("PCI: Configuration aborted.\n");
+ return 0;
+ }
+#endif
+
+ /*-------------------------------------------------------------------------+
+ | Set priority for all PLB3 devices to 0.
+ | Set PLB3 arbiter to fair mode.
+ +-------------------------------------------------------------------------*/
+ mfsdr(sdr_amp1, addr);
+ mtsdr(sdr_amp1, (addr & 0x000000FF) | 0x0000FF00);
+ addr = mfdcr(plb3_acr);
+ mtdcr(plb3_acr, addr | 0x80000000);
+
+ /*-------------------------------------------------------------------------+
+ | Set priority for all PLB4 devices to 0.
+ +-------------------------------------------------------------------------*/
+ mfsdr(sdr_amp0, addr);
+ mtsdr(sdr_amp0, (addr & 0x000000FF) | 0x0000FF00);
+ addr = mfdcr(plb4_acr) | 0xa0000000; /* Was 0x8---- */
+ mtdcr(plb4_acr, addr);
+
+ /*-------------------------------------------------------------------------+
+ | Set Nebula PLB4 arbiter to fair mode.
+ +-------------------------------------------------------------------------*/
+ /* Segment0 */
+ addr = (mfdcr(plb0_acr) & ~plb0_acr_ppm_mask) | plb0_acr_ppm_fair;
+ addr = (addr & ~plb0_acr_hbu_mask) | plb0_acr_hbu_enabled;
+ addr = (addr & ~plb0_acr_rdp_mask) | plb0_acr_rdp_4deep;
+ addr = (addr & ~plb0_acr_wrp_mask) | plb0_acr_wrp_2deep;
+ mtdcr(plb0_acr, addr);
+
+ /* Segment1 */
+ addr = (mfdcr(plb1_acr) & ~plb1_acr_ppm_mask) | plb1_acr_ppm_fair;
+ addr = (addr & ~plb1_acr_hbu_mask) | plb1_acr_hbu_enabled;
+ addr = (addr & ~plb1_acr_rdp_mask) | plb1_acr_rdp_4deep;
+ addr = (addr & ~plb1_acr_wrp_mask) | plb1_acr_wrp_2deep;
+ mtdcr(plb1_acr, addr);
+
+ return 1;
+}
+#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */
+
+/*************************************************************************
+ * pci_target_init
+ *
+ * The bootstrap configuration provides default settings for the pci
+ * inbound map (PIM). But the bootstrap config choices are limited and
+ * may not be sufficient for a given board.
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
+void pci_target_init(struct pci_controller *hose)
+{
+ /*--------------------------------------------------------------------------+
+ * Set up Direct MMIO registers
+ *--------------------------------------------------------------------------*/
+ /*--------------------------------------------------------------------------+
+ | PowerPC440EPX PCI Master configuration.
+ | Map one 1Gig range of PLB/processor addresses to PCI memory space.
+ | PLB address 0xA0000000-0xDFFFFFFF ==> PCI address 0xA0000000-0xDFFFFFFF
+ | Use byte reversed out routines to handle endianess.
+ | Make this region non-prefetchable.
+ +--------------------------------------------------------------------------*/
+ out32r(PCIX0_PMM0MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */
+ out32r(PCIX0_PMM0LA, CFG_PCI_MEMBASE); /* PMM0 Local Address */
+ out32r(PCIX0_PMM0PCILA, CFG_PCI_MEMBASE); /* PMM0 PCI Low Address */
+ out32r(PCIX0_PMM0PCIHA, 0x00000000); /* PMM0 PCI High Address */
+ out32r(PCIX0_PMM0MA, 0xE0000001); /* 512M + No prefetching, and enable region */
+
+ out32r(PCIX0_PMM1MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */
+ out32r(PCIX0_PMM1LA, CFG_PCI_MEMBASE2); /* PMM0 Local Address */
+ out32r(PCIX0_PMM1PCILA, CFG_PCI_MEMBASE2); /* PMM0 PCI Low Address */
+ out32r(PCIX0_PMM1PCIHA, 0x00000000); /* PMM0 PCI High Address */
+ out32r(PCIX0_PMM1MA, 0xE0000001); /* 512M + No prefetching, and enable region */
+
+ out32r(PCIX0_PTM1MS, 0x00000001); /* Memory Size/Attribute */
+ out32r(PCIX0_PTM1LA, 0); /* Local Addr. Reg */
+ out32r(PCIX0_PTM2MS, 0); /* Memory Size/Attribute */
+ out32r(PCIX0_PTM2LA, 0); /* Local Addr. Reg */
+
+ /*--------------------------------------------------------------------------+
+ * Set up Configuration registers
+ *--------------------------------------------------------------------------*/
+
+ /* Program the board's subsystem id/vendor id */
+ pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID,
+ CFG_PCI_SUBSYS_VENDORID);
+ pci_write_config_word(0, PCI_SUBSYSTEM_ID, CFG_PCI_SUBSYS_ID);
+
+ /* Configure command register as bus master */
+ pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER);
+
+ /* 240nS PCI clock */
+ pci_write_config_word(0, PCI_LATENCY_TIMER, 1);
+
+ /* No error reporting */
+ pci_write_config_word(0, PCI_ERREN, 0);
+
+ pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101);
+
+}
+#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
+
+/*************************************************************************
+ * pci_master_init
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT)
+void pci_master_init(struct pci_controller *hose)
+{
+ unsigned short temp_short;
+
+ /*--------------------------------------------------------------------------+
+ | Write the PowerPC440 EP PCI Configuration regs.
+ | Enable PowerPC440 EP to be a master on the PCI bus (PMM).
+ | Enable PowerPC440 EP to act as a PCI memory target (PTM).
+ +--------------------------------------------------------------------------*/
+ pci_read_config_word(0, PCI_COMMAND, &temp_short);
+ pci_write_config_word(0, PCI_COMMAND,
+ temp_short | PCI_COMMAND_MASTER |
+ PCI_COMMAND_MEMORY);
+}
+#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) */
+
+/*************************************************************************
+ * is_pci_host
+ *
+ * This routine is called to determine if a pci scan should be
+ * performed. With various hardware environments (especially cPCI and
+ * PPMC) it's insufficient to depend on the state of the arbiter enable
+ * bit in the strap register, or generic host/adapter assumptions.
+ *
+ * Rather than hard-code a bad assumption in the general 440 code, the
+ * 440 pci code requires the board to decide at runtime.
+ *
+ * Return 0 for adapter mode, non-zero for host (monarch) mode.
+ *
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI)
+int is_pci_host(struct pci_controller *hose)
+{
+ /* Cactus is always configured as host. */
+ return (1);
+}
+#endif /* defined(CONFIG_PCI) */
diff --git a/board/amcc/sequoia/sequoia.h b/board/amcc/sequoia/sequoia.h
new file mode 100644
index 0000000..1d44b16
--- /dev/null
+++ b/board/amcc/sequoia/sequoia.h
@@ -0,0 +1,67 @@
+/*
+ * (C) Copyright 2006
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * (C) Copyright 2006
+ * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com
+ * Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+/*----------------------------------------------------------------------------+
+ | EBC Configuration Register - EBC0_CFG
+ +----------------------------------------------------------------------------*/
+/* External Bus Three-State Control */
+#define EBC0_CFG_EBTC_DRIVEN 0x80000000
+/* Device-Paced Time-out Disable */
+#define EBC0_CFG_PTD_ENABLED 0x00000000
+/* Ready Timeout Count */
+#define EBC0_CFG_RTC_MASK 0x38000000
+#define EBC0_CFG_RTC_16PERCLK 0x00000000
+#define EBC0_CFG_RTC_32PERCLK 0x08000000
+#define EBC0_CFG_RTC_64PERCLK 0x10000000
+#define EBC0_CFG_RTC_128PERCLK 0x18000000
+#define EBC0_CFG_RTC_256PERCLK 0x20000000
+#define EBC0_CFG_RTC_512PERCLK 0x28000000
+#define EBC0_CFG_RTC_1024PERCLK 0x30000000
+#define EBC0_CFG_RTC_2048PERCLK 0x38000000
+/* External Master Priority Low */
+#define EBC0_CFG_EMPL_LOW 0x00000000
+#define EBC0_CFG_EMPL_MEDIUM_LOW 0x02000000
+#define EBC0_CFG_EMPL_MEDIUM_HIGH 0x04000000
+#define EBC0_CFG_EMPL_HIGH 0x06000000
+/* External Master Priority High */
+#define EBC0_CFG_EMPH_LOW 0x00000000
+#define EBC0_CFG_EMPH_MEDIUM_LOW 0x00800000
+#define EBC0_CFG_EMPH_MEDIUM_HIGH 0x01000000
+#define EBC0_CFG_EMPH_HIGH 0x01800000
+/* Chip Select Three-State Control */
+#define EBC0_CFG_CSTC_DRIVEN 0x00400000
+/* Burst Prefetch */
+#define EBC0_CFG_BPF_ONEDW 0x00000000
+#define EBC0_CFG_BPF_TWODW 0x00100000
+#define EBC0_CFG_BPF_FOURDW 0x00200000
+/* External Master Size */
+#define EBC0_CFG_EMS_8BIT 0x00000000
+/* Power Management Enable */
+#define EBC0_CFG_PME_DISABLED 0x00000000
+#define EBC0_CFG_PME_ENABLED 0x00020000
+/* Power Management Timer */
+#define EBC0_CFG_PMT_ENCODE(n) ((((unsigned long)(n))&0x1F)<<12)
+
+#define SDR0_USB0 0x0320 /* USB Control Register */
diff --git a/board/amcc/sequoia/u-boot-nand.lds b/board/amcc/sequoia/u-boot-nand.lds
new file mode 100644
index 0000000..cf2e2b5
--- /dev/null
+++ b/board/amcc/sequoia/u-boot-nand.lds
@@ -0,0 +1,137 @@
+/*
+ * (C) Copyright 2006
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ /* WARNING - the following is hand-optimized to fit within */
+ /* the sector layout of our flash chips! XXX FIXME XXX */
+
+ cpu/ppc4xx/start.o (.text)
+
+ /* Align to next NAND block */
+ . = ALIGN(0x4000);
+ common/environment.o (.ppcenv)
+ /* Keep some space here for redundant env and potential bad env blocks */
+ . = ALIGN(0x10000);
+
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.rodata)
+ *(.rodata1)
+ *(.rodata.str1.4)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x00FF) & 0xFFFFFF00;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+ __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(256);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+
+ _end = . ;
+ PROVIDE (end = .);
+}
diff --git a/board/amcc/sequoia/u-boot.lds b/board/amcc/sequoia/u-boot.lds
new file mode 100644
index 0000000..a423f98
--- /dev/null
+++ b/board/amcc/sequoia/u-boot.lds
@@ -0,0 +1,145 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ .resetvec 0xFFFFFFFC :
+ {
+ *(.resetvec)
+ } = 0xffff
+
+ .bootpg 0xFFFFF000 :
+ {
+ cpu/ppc4xx/start.o (.bootpg)
+ } = 0xffff
+
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ /* WARNING - the following is hand-optimized to fit within */
+ /* the sector layout of our flash chips! XXX FIXME XXX */
+
+ cpu/ppc4xx/start.o (.text)
+
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.rodata)
+ *(.rodata1)
+ *(.rodata.str1.4)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x00FF) & 0xFFFFFF00;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+ __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(256);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+
+ ppcenv_assert = ASSERT(. < 0xFFFF8000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CFG_MONITOR_BASE, CFG_MONITOR_LEN and TEXT_BASE may need to be modified.");
+
+ _end = . ;
+ PROVIDE (end = .);
+}
diff --git a/board/amcc/walnut/Makefile b/board/amcc/walnut/Makefile
index f5bda55..50fecc6 100644
--- a/board/amcc/walnut/Makefile
+++ b/board/amcc/walnut/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,12 +23,16 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -38,9 +42,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/amcc/yellowstone/Makefile b/board/amcc/yellowstone/Makefile
index 47116d3..261e5d4 100644
--- a/board/amcc/yellowstone/Makefile
+++ b/board/amcc/yellowstone/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2002
+# (C) Copyright 2002-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,13 +23,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o
+COBJS = $(BOARD).o
SOBJS = init.o
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -39,9 +43,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/amcc/yosemite/Makefile b/board/amcc/yosemite/Makefile
index 47116d3..261e5d4 100644
--- a/board/amcc/yosemite/Makefile
+++ b/board/amcc/yosemite/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2002
+# (C) Copyright 2002-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,13 +23,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o
+COBJS = $(BOARD).o
SOBJS = init.o
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -39,9 +43,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/amcc/yucca/Makefile b/board/amcc/yucca/Makefile
index c85fa31..9f42279 100644
--- a/board/amcc/yucca/Makefile
+++ b/board/amcc/yucca/Makefile
@@ -23,13 +23,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o cmd_yucca.o
+COBJS = $(BOARD).o flash.o cmd_yucca.o
SOBJS = init.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -39,9 +43,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/amcc/yucca/yucca.c b/board/amcc/yucca/yucca.c
index af12839..e9b34dd 100644
--- a/board/amcc/yucca/yucca.c
+++ b/board/amcc/yucca/yucca.c
@@ -32,6 +32,10 @@
#include <asm-ppc/io.h>
#include "yucca.h"
+#include "../cpu/ppc4xx/440spe_pcie.h"
+
+#undef PCIE_ENDPOINT
+/* #define PCIE_ENDPOINT 1 */
void fpga_init (void);
@@ -562,10 +566,11 @@
static long int yucca_probe_for_dimms(void)
{
- long int dimm_installed[MAXDIMMS];
- long int dimm_num, probe_result;
- long int dimms_found = 0;
- uchar dimm_addr = IIC0_DIMM0_ADDR;
+ int dimm_installed[MAXDIMMS];
+ int dimm_num, result;
+ int dimms_found = 0;
+ uchar dimm_addr = IIC0_DIMM0_ADDR;
+ uchar dimm_spd_data[MAX_SPD_BYTES];
for (dimm_num = 0; dimm_num < MAXDIMMS; dimm_num++) {
/* check if there is a chip at the dimm address */
@@ -577,12 +582,28 @@
dimm_addr = IIC0_DIMM1_ADDR;
break;
}
- probe_result = i2c_probe(dimm_addr);
+
+ result = i2c_probe(dimm_addr);
- if (probe_result == 0) {
+ memset(dimm_spd_data, 0, MAX_SPD_BYTES * sizeof(char));
+ if (result == 0) {
+ /* read first byte of SPD data, if there is any data */
+ result = i2c_read(dimm_addr, 0, 1, dimm_spd_data, 1);
+
+ if (result == 0) {
+ result = dimm_spd_data[0];
+ result = result > MAX_SPD_BYTES ?
+ MAX_SPD_BYTES : result;
+ result = i2c_read(dimm_addr, 0, 1,
+ dimm_spd_data, result);
+ }
+ }
+
+ if ((result == 0) &&
+ (dimm_spd_data[64] == MICRON_SPD_JEDEC_ID)) {
dimm_installed[dimm_num] = TRUE;
dimms_found++;
- debug("DIMM slot %d: DDR2 SDRAM detected\n",dimm_num);
+ debug("DIMM slot %d: DDR2 SDRAM detected\n", dimm_num);
} else {
dimm_installed[dimm_num] = FALSE;
debug("DIMM slot %d: Not populated or cannot sucessfully probe the DIMM\n", dimm_num);
@@ -937,7 +958,6 @@
return 1;
}
-
int yucca_pcie_card_present(int port)
{
u16 reg;
@@ -1012,7 +1032,56 @@
out_be16((u16 *)FPGA_REG1C, reset_off | in_be16((u16 *)FPGA_REG1C));
}
+/*
+ * For the given slot, set endpoint mode, send power to the slot,
+ * turn on the green LED and turn off the yellow LED, enable the clock
+ * .In end point mode reset bit is read only.
+ */
+void yucca_setup_pcie_fpga_endpoint(int port)
+{
+ u16 power, clock, green_led, yellow_led, reset_off, rootpoint, endpoint;
+
+ switch(port) {
+ case 0:
+ rootpoint = FPGA_REG1C_PE0_ROOTPOINT;
+ endpoint = 0;
+ power = FPGA_REG1A_PE0_PWRON;
+ green_led = FPGA_REG1A_PE0_GLED;
+ clock = FPGA_REG1A_PE0_REFCLK_ENABLE;
+ yellow_led = FPGA_REG1A_PE0_YLED;
+ reset_off = FPGA_REG1C_PE0_PERST;
+ break;
+ case 1:
+ rootpoint = 0;
+ endpoint = FPGA_REG1C_PE1_ENDPOINT;
+ power = FPGA_REG1A_PE1_PWRON;
+ green_led = FPGA_REG1A_PE1_GLED;
+ clock = FPGA_REG1A_PE1_REFCLK_ENABLE;
+ yellow_led = FPGA_REG1A_PE1_YLED;
+ reset_off = FPGA_REG1C_PE1_PERST;
+ break;
+ case 2:
+ rootpoint = 0;
+ endpoint = FPGA_REG1C_PE2_ENDPOINT;
+ power = FPGA_REG1A_PE2_PWRON;
+ green_led = FPGA_REG1A_PE2_GLED;
+ clock = FPGA_REG1A_PE2_REFCLK_ENABLE;
+ yellow_led = FPGA_REG1A_PE2_YLED;
+ reset_off = FPGA_REG1C_PE2_PERST;
+ break;
+
+ default:
+ return;
+ }
+
+ out_be16((u16 *)FPGA_REG1A,
+ ~(power | clock | green_led) &
+ (yellow_led | in_be16((u16 *)FPGA_REG1A)));
+ out_be16((u16 *)FPGA_REG1C,
+ ~(rootpoint | reset_off) &
+ (endpoint | in_be16((u16 *)FPGA_REG1C)));
+}
static struct pci_controller pcie_hose[3] = {{0},{0},{0}};
@@ -1031,9 +1100,13 @@
if (!yucca_pcie_card_present(i))
continue;
+#ifdef PCIE_ENDPOINT
+ yucca_setup_pcie_fpga_endpoint(i);
+ if (ppc440spe_init_pcie_endport(i)) {
+#else
yucca_setup_pcie_fpga_rootpoint(i);
-
if (ppc440spe_init_pcie_rootport(i)) {
+#endif
printf("PCIE%d: initialization failed\n", i);
continue;
}
@@ -1053,8 +1126,19 @@
hose->region_count = 1;
pci_register_hose(hose);
- ppc440spe_setup_pcie(hose, i);
+#ifdef PCIE_ENDPOINT
+ ppc440spe_setup_pcie_endpoint(hose, i);
+ /*
+ * Reson for no scanning is endpoint can not generate
+ * upstream configuration accesses.
+ */
+#else
+ ppc440spe_setup_pcie_rootpoint(hose, i);
+ /*
+ * Config access can only go down stream
+ */
hose->last_busno = pci_hose_scan(hose);
+#endif
}
}
#endif /* defined(CONFIG_PCI) */
diff --git a/board/amcc/yucca/yucca.h b/board/amcc/yucca/yucca.h
index 66f7584..4d13021 100644
--- a/board/amcc/yucca/yucca.h
+++ b/board/amcc/yucca/yucca.h
@@ -60,6 +60,9 @@
#define NUM_TLB_ENTRIES 64
+/* MICRON SPD JEDEC ID Code (first byte) - SPD data byte [64] */
+#define MICRON_SPD_JEDEC_ID 0x2c
+
/*----------------------------------------------------------------------------+
| TLB specific defines.
+----------------------------------------------------------------------------*/
diff --git a/board/amirix/ap1000/Makefile b/board/amirix/ap1000/Makefile
index 4e1ef21..7b99d31 100644
--- a/board/amirix/ap1000/Makefile
+++ b/board/amirix/ap1000/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,13 +23,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o serial.o pci.o powerspan.o
+COBJS = $(BOARD).o flash.o serial.o pci.o powerspan.o
SOBJS = init.o
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $^
+ $(AR) $(ARFLAGS) $@ $^
clean:
rm -f $(SOBJS) $(OBJS)
@@ -39,9 +43,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/armadillo/Makefile b/board/armadillo/Makefile
index 52ea7f2..1380e92 100644
--- a/board/armadillo/Makefile
+++ b/board/armadillo/Makefile
@@ -1,4 +1,7 @@
#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
# (C) Copyright 2002
# Sysgo Real-Time Solutions, GmbH <www.elinos.com>
# Marius Groeger <mgroeger@sysgo.de>
@@ -24,13 +27,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := armadillo.o flash.o
+COBJS := armadillo.o flash.o
SOBJS := lowlevel_init.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -40,9 +47,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/assabet/Makefile b/board/assabet/Makefile
index c49f1b4..872c7fb 100644
--- a/board/assabet/Makefile
+++ b/board/assabet/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2004
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# 2004 (c) MontaVista Software, Inc.
@@ -25,13 +25,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := assabet.o
+COBJS := assabet.o
SOBJS := setup.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -41,9 +45,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/at91rm9200dk/Makefile b/board/at91rm9200dk/Makefile
index ec77da9..0fcafd9 100644
--- a/board/at91rm9200dk/Makefile
+++ b/board/at91rm9200dk/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2003
+# (C) Copyright 2003-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,12 +23,16 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := at91rm9200dk.o at45.o flash.o
+COBJS := at91rm9200dk.o at45.o flash.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -38,9 +42,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/atc/Makefile b/board/atc/Makefile
index 7573a0c..4b9cd7b 100644
--- a/board/atc/Makefile
+++ b/board/atc/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o ti113x.o
+COBJS = $(BOARD).o flash.o ti113x.o
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/barco/Makefile b/board/barco/Makefile
index d6bbf2f..5aa02d4 100644
--- a/board/barco/Makefile
+++ b/board/barco/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/bc3450/Makefile b/board/bc3450/Makefile
index 4dec44f..d0e147e 100644
--- a/board/bc3450/Makefile
+++ b/board/bc3450/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2003-2004
+# (C) Copyright 2003-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,12 +23,16 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := $(BOARD).o cmd_bc3450.o
+COBJS := $(BOARD).o cmd_bc3450.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -38,9 +42,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/bmw/Makefile b/board/bmw/Makefile
index 621640b..ac85cc3 100644
--- a/board/bmw/Makefile
+++ b/board/bmw/Makefile
@@ -1,4 +1,7 @@
#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
# (C) Copyright 2002
# James F. Dougherty, Broadcom Corporation, jfd@broadcom.com
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -24,20 +27,24 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o ns16550.o serial.o m48t59y.o
+COBJS = $(BOARD).o flash.o ns16550.o serial.o m48t59y.o
SOBJS = early_init.o
-$(LIB): .depend $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/c2mon/Makefile b/board/c2mon/Makefile
index 7b2b545..2b10b0c 100644
--- a/board/c2mon/Makefile
+++ b/board/c2mon/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o pcmcia.o
+COBJS = $(BOARD).o flash.o pcmcia.o
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/canmb/Makefile b/board/canmb/Makefile
index 607833f..23d410d 100644
--- a/board/canmb/Makefile
+++ b/board/canmb/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2005
+# (C) Copyright 2005-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -22,14 +22,21 @@
#
include $(TOPDIR)/config.mk
+#ifneq ($(OBJTREE),$(SRCTREE))
+#$(shell mkdir -p $(obj)../common)
+#endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := $(BOARD).o
+COBJS := $(BOARD).o
#../common/flash.o ../common/vpd.o ../common/am79c874.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -39,9 +46,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/cds/mpc8541cds/Makefile b/board/cds/mpc8541cds/Makefile
index d202281..7f53098 100644
--- a/board/cds/mpc8541cds/Makefile
+++ b/board/cds/mpc8541cds/Makefile
@@ -1,6 +1,6 @@
#
# Copyright 2004 Freescale Semiconductor.
-# (C) Copyright 2001
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,10 +23,13 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := $(BOARD).o \
+COBJS := $(BOARD).o \
../common/cadmus.o \
../common/eeprom.o \
../common/ft_board.o \
@@ -34,8 +37,12 @@
SOBJS := init.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(OBJS) $(SOBJS)
@@ -45,9 +52,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/cds/mpc8548cds/Makefile b/board/cds/mpc8548cds/Makefile
index d202281..7f53098 100644
--- a/board/cds/mpc8548cds/Makefile
+++ b/board/cds/mpc8548cds/Makefile
@@ -1,6 +1,6 @@
#
# Copyright 2004 Freescale Semiconductor.
-# (C) Copyright 2001
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,10 +23,13 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := $(BOARD).o \
+COBJS := $(BOARD).o \
../common/cadmus.o \
../common/eeprom.o \
../common/ft_board.o \
@@ -34,8 +37,12 @@
SOBJS := init.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(OBJS) $(SOBJS)
@@ -45,9 +52,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/cds/mpc8555cds/Makefile b/board/cds/mpc8555cds/Makefile
index d202281..7f53098 100644
--- a/board/cds/mpc8555cds/Makefile
+++ b/board/cds/mpc8555cds/Makefile
@@ -1,6 +1,6 @@
#
# Copyright 2004 Freescale Semiconductor.
-# (C) Copyright 2001
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,10 +23,13 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := $(BOARD).o \
+COBJS := $(BOARD).o \
../common/cadmus.o \
../common/eeprom.o \
../common/ft_board.o \
@@ -34,8 +37,12 @@
SOBJS := init.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(OBJS) $(SOBJS)
@@ -45,9 +52,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/cerf250/Makefile b/board/cerf250/Makefile
index 83e3ba4..50d07b8 100644
--- a/board/cerf250/Makefile
+++ b/board/cerf250/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,13 +23,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := cerf250.o flash.o
+COBJS := cerf250.o flash.o
SOBJS := lowlevel_init.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -39,9 +43,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/cm4008/Makefile b/board/cm4008/Makefile
index c66dd71..f534041 100644
--- a/board/cm4008/Makefile
+++ b/board/cm4008/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000, 2002
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,12 +23,16 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := cm4008.o flash.o
+COBJS := cm4008.o flash.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $^
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -38,9 +42,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/cm41xx/Makefile b/board/cm41xx/Makefile
index f0d3451..5c20477 100644
--- a/board/cm41xx/Makefile
+++ b/board/cm41xx/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000, 2002
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,12 +23,16 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := cm41xx.o flash.o
+COBJS := cm41xx.o flash.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $^
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -38,9 +42,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/cmc_pu2/Makefile b/board/cmc_pu2/Makefile
index d0def05..d445f28 100644
--- a/board/cmc_pu2/Makefile
+++ b/board/cmc_pu2/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2003
+# (C) Copyright 2003-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,12 +23,16 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := cmc_pu2.o at45.o flash.o load_sernum_ethaddr.o
+COBJS := cmc_pu2.o at45.o flash.o load_sernum_ethaddr.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -38,9 +42,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/cmi/Makefile b/board/cmi/Makefile
index 2324d87..6a42304 100644
--- a/board/cmi/Makefile
+++ b/board/cmi/Makefile
@@ -1,6 +1,6 @@
#
-# (C) Copyright 2001 Wolfgang Denk, DENX Software Engineering, wd@denx.de
-#
+# (C) Copyright 2001-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de
#
# See file CREDITS for list of people who contributed to this
# project.
@@ -23,13 +23,16 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := flash.o cmi.o
-SOBJS :=
+COBJS := flash.o cmi.o
-$(LIB): $(OBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -39,9 +42,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/cobra5272/Makefile b/board/cobra5272/Makefile
index e5d8446..cf07cf4 100644
--- a/board/cobra5272/Makefile
+++ b/board/cobra5272/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2003
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/cogent/Makefile b/board/cogent/Makefile
index 4084c7e..ced04dd 100644
--- a/board/cogent/Makefile
+++ b/board/cogent/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,13 +23,16 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := mb.o flash.o dipsw.o lcd.o serial.o # pci.o rtc.o par.o kbm.o
-SOBJS :=
+COBJS := mb.o flash.o dipsw.o lcd.o serial.o # pci.o rtc.o par.o kbm.o
-$(LIB): $(OBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -39,9 +42,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/cpc45/Makefile b/board/cpc45/Makefile
index ccb811b..374fdd7 100644
--- a/board/cpc45/Makefile
+++ b/board/cpc45/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001-2003
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o plx9030.o pd67290.o
+COBJS = $(BOARD).o flash.o plx9030.o pd67290.o
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/cpu86/Makefile b/board/cpu86/Makefile
index 7a2014d..dcb1907 100644
--- a/board/cpu86/Makefile
+++ b/board/cpu86/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/cpu87/Makefile b/board/cpu87/Makefile
index 26f53ed..dcb1907 100644
--- a/board/cpu87/Makefile
+++ b/board/cpu87/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001-2005
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/cpu87/cpu87.c b/board/cpu87/cpu87.c
index e8c2614..9fecdd0 100644
--- a/board/cpu87/cpu87.c
+++ b/board/cpu87/cpu87.c
@@ -294,15 +294,15 @@
*/
size8 = try_init (memctl, CFG_PSDMR_8COL, CFG_OR2_8COL,
(uchar *) CFG_SDRAM_BASE);
-
+
size9 = try_init (memctl, CFG_PSDMR_9COL, CFG_OR2_9COL,
(uchar *) CFG_SDRAM_BASE);
-
+
size10 = try_init (memctl, CFG_PSDMR_10COL, CFG_OR2_10COL,
(uchar *) CFG_SDRAM_BASE);
-
+
psize = max(size8,max(size9,size10));
-
+
if (psize == size8) {
psize = try_init (memctl, CFG_PSDMR_8COL, CFG_OR2_8COL,
(uchar *) CFG_SDRAM_BASE);
diff --git a/board/cradle/Makefile b/board/cradle/Makefile
index 265d500..90a7907 100644
--- a/board/cradle/Makefile
+++ b/board/cradle/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000, 2002
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,13 +23,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := cradle.o flash.o
+COBJS := cradle.o flash.o
SOBJS := lowlevel_init.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -39,9 +43,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/cray/L1/Makefile b/board/cray/L1/Makefile
index bfe0922..cfdd60e 100644
--- a/board/cray/L1/Makefile
+++ b/board/cray/L1/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,35 +23,41 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
SOBJS = init.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
# HACK: depend needs bootscript.c, which needs tools/mkimage, which is not
# built in the depend stage. So... put bootscript.o here, not in OBJS
-$(LIB): $(OBJS) $(SOBJS) bootscript.o
- $(AR) crv $@ $^
+$(LIB): $(OBJS) $(SOBJS) $(obj)bootscript.o
+ $(AR) $(ARFLAGS) $@ $^
clean:
- rm -f $(SOBJS) $(OBJS) bootscript.c bootscript.image bootscript.o
+ rm -f $(SOBJS) $(OBJS) $(obj)bootscript.c \
+ $(obj)bootscript.image $(obj)bootscript.o
distclean: clean
rm -f $(LIB) core *.bak .depend
-$(BOARD).o : $(BOARD).c bootscript.o
+$(obj)$(BOARD).o : $(src)$(BOARD).c $(obj)bootscript.o
-bootscript.c: bootscript.image
+$(obj)bootscript.c: $(obj)bootscript.image
od -t x1 -v -A x $^ | awk -f x2c.awk > $@
-bootscript.image: bootscript.hush Makefile
- -$(TOPDIR)/tools/mkimage -A ppc -O linux -T script -C none -a 0 -e 0 -n bootscript -d bootscript.hush $@
+$(obj)bootscript.image: $(src)bootscript.hush $(src)Makefile
+ -$(OBJTREE)/tools/mkimage -A ppc -O linux -T script -C none -a 0 -e 0 -n bootscript -d $(src)bootscript.hush $@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/csb226/Makefile b/board/csb226/Makefile
index 5b311a9..eee8f13 100644
--- a/board/csb226/Makefile
+++ b/board/csb226/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,13 +23,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := csb226.o flash.o
+COBJS := csb226.o flash.o
SOBJS := lowlevel_init.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -39,9 +43,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/csb272/Makefile b/board/csb272/Makefile
index 926e065..703a25c 100644
--- a/board/csb272/Makefile
+++ b/board/csb272/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2004
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,17 +23,20 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-#OBJS = $(BOARD).o flash.o
-#OBJS = $(BOARD).o strataflash.o
-OBJS = $(BOARD).o
+#COBJS = $(BOARD).o flash.o
+#COBJS = $(BOARD).o strataflash.o
+COBJS = $(BOARD).o
SOBJS = init.o
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $^
+ $(AR) $(ARFLAGS) $@ $^
clean:
rm -f $(SOBJS) $(OBJS)
@@ -43,9 +46,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/csb472/Makefile b/board/csb472/Makefile
index 926e065..703a25c 100644
--- a/board/csb472/Makefile
+++ b/board/csb472/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2004
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,17 +23,20 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-#OBJS = $(BOARD).o flash.o
-#OBJS = $(BOARD).o strataflash.o
-OBJS = $(BOARD).o
+#COBJS = $(BOARD).o flash.o
+#COBJS = $(BOARD).o strataflash.o
+COBJS = $(BOARD).o
SOBJS = init.o
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $^
+ $(AR) $(ARFLAGS) $@ $^
clean:
rm -f $(SOBJS) $(OBJS)
@@ -43,9 +46,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/csb637/Makefile b/board/csb637/Makefile
index 61d5a35..ce263aa 100644
--- a/board/csb637/Makefile
+++ b/board/csb637/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2003
+# (C) Copyright 2003-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,12 +23,16 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := csb637.o
+COBJS := csb637.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -38,9 +42,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/cu824/Makefile b/board/cu824/Makefile
index 7a2014d..dcb1907 100644
--- a/board/cu824/Makefile
+++ b/board/cu824/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/dave/B2/Makefile b/board/dave/B2/Makefile
index 548fd52..56b286f 100644
--- a/board/dave/B2/Makefile
+++ b/board/dave/B2/Makefile
@@ -1,4 +1,7 @@
#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
# (C) Copyright 2002
# Sysgo Real-Time Solutions, GmbH <www.elinos.com>
# Marius Groeger <mgroeger@sysgo.de>
@@ -24,13 +27,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := B2.o flash.o
+COBJS := B2.o flash.o
SOBJS := lowlevel_init.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -40,9 +47,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/dave/PPChameleonEVB/Makefile b/board/dave/PPChameleonEVB/Makefile
index 581a580..cb7becb 100644
--- a/board/dave/PPChameleonEVB/Makefile
+++ b/board/dave/PPChameleonEVB/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,12 +23,16 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o nand.o
+COBJS = $(BOARD).o flash.o nand.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $^
+ $(AR) $(ARFLAGS) $@ $^
clean:
rm -f $(SOBJS) $(OBJS)
@@ -38,9 +42,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/dbau1x00/Makefile b/board/dbau1x00/Makefile
index d9b0e2d..afe02c2 100644
--- a/board/dbau1x00/Makefile
+++ b/board/dbau1x00/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2003
+# (C) Copyright 2003-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,19 +23,23 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
SOBJS = lowlevel_init.o
-$(LIB): .depend $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/delta/Makefile b/board/delta/Makefile
index e744eec..7213328 100644
--- a/board/delta/Makefile
+++ b/board/delta/Makefile
@@ -1,6 +1,6 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -24,13 +24,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := delta.o nand.o
+COBJS := delta.o nand.o
SOBJS := lowlevel_init.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -40,9 +44,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/dnp1110/Makefile b/board/dnp1110/Makefile
index eaa38bc..a024e55 100644
--- a/board/dnp1110/Makefile
+++ b/board/dnp1110/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,13 +23,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := dnp1110.o flash.o
+COBJS := dnp1110.o flash.o
SOBJS := lowlevel_init.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -39,9 +43,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/eXalion/Makefile b/board/eXalion/Makefile
index cfbf465..98601a3 100644
--- a/board/eXalion/Makefile
+++ b/board/eXalion/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,19 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o
-SOBJS =
+COBJS = $(BOARD).o
-$(LIB): .depend $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/eltec/bab7xx/Makefile b/board/eltec/bab7xx/Makefile
index 7d8ed26..f4b0b07 100644
--- a/board/eltec/bab7xx/Makefile
+++ b/board/eltec/bab7xx/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,14 +23,18 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o pci.o misc.o el_srom.o dc_srom.o l2cache.o
+COBJS = $(BOARD).o flash.o pci.o misc.o el_srom.o dc_srom.o l2cache.o
SOBJS = asm_init.o
-$(LIB): .depend $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -40,9 +44,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/eltec/elppc/Makefile b/board/eltec/elppc/Makefile
index 76b2cfe..5ab9623 100644
--- a/board/eltec/elppc/Makefile
+++ b/board/eltec/elppc/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,14 +23,18 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o pci.o misc.o mpc107_i2c.o eepro100_srom.o
+COBJS = $(BOARD).o flash.o pci.o misc.o mpc107_i2c.o eepro100_srom.o
SOBJS = asm_init.o
-$(LIB): .depend $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -40,9 +44,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/eltec/mhpc/Makefile b/board/eltec/mhpc/Makefile
index 13ce9fc..cf07cf4 100644
--- a/board/eltec/mhpc/Makefile
+++ b/board/eltec/mhpc/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/emk/top5200/Makefile b/board/emk/top5200/Makefile
index 986608b..b257739 100644
--- a/board/emk/top5200/Makefile
+++ b/board/emk/top5200/Makefile
@@ -1,6 +1,6 @@
#
-# (C) Copyright 2003
+# (C) Copyright 2003-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,13 +23,20 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := $(BOARD).o ../common/flash.o ../common/vpd.o ../common/am79c874.o
+COBJS := $(BOARD).o ../common/flash.o ../common/vpd.o ../common/am79c874.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -39,9 +46,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/emk/top860/Makefile b/board/emk/top860/Makefile
index a74dd2f..88abd76 100644
--- a/board/emk/top860/Makefile
+++ b/board/emk/top860/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -22,19 +22,26 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o ../common/flash.o ../common/vpd.o ../common/am79c874.o
+COBJS = $(BOARD).o ../common/flash.o ../common/vpd.o ../common/am79c874.o
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/ep7312/Makefile b/board/ep7312/Makefile
index c53a3c7..45ee6cd 100644
--- a/board/ep7312/Makefile
+++ b/board/ep7312/Makefile
@@ -1,4 +1,7 @@
#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
# (C) Copyright 2002
# Sysgo Real-Time Solutions, GmbH <www.elinos.com>
# Marius Groeger <mgroeger@sysgo.de>
@@ -24,13 +27,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := ep7312.o flash.o
+COBJS := ep7312.o flash.o
SOBJS := lowlevel_init.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -40,9 +47,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/ep8248/Makefile b/board/ep8248/Makefile
index 8b10993..be7e213 100644
--- a/board/ep8248/Makefile
+++ b/board/ep8248/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,12 +23,16 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := $(BOARD).o
+COBJS := $(BOARD).o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -38,9 +42,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/ep8260/Makefile b/board/ep8260/Makefile
index 477e5ee..f75249f 100644
--- a/board/ep8260/Makefile
+++ b/board/ep8260/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2002
+# (C) Copyright 2002-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,12 +23,16 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o mii_phy.o
+COBJS = $(BOARD).o flash.o mii_phy.o
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -38,9 +42,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/ep82xxm/Makefile b/board/ep82xxm/Makefile
new file mode 100644
index 0000000..349be1f
--- /dev/null
+++ b/board/ep82xxm/Makefile
@@ -0,0 +1,49 @@
+#
+# (C) Copyright 2001-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS := $(BOARD).o
+
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+
+$(LIB): $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+ rm -f $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend *~
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/ep82xxm/config.mk b/board/ep82xxm/config.mk
new file mode 100644
index 0000000..da039e2
--- /dev/null
+++ b/board/ep82xxm/config.mk
@@ -0,0 +1,26 @@
+#
+# (C) Copyright 2001-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+# EP82xxM series boards by Embedded Planet
+
+TEXT_BASE = 0xFFF00000
diff --git a/board/ep82xxm/ep82xxm.c b/board/ep82xxm/ep82xxm.c
new file mode 100644
index 0000000..35e644d
--- /dev/null
+++ b/board/ep82xxm/ep82xxm.c
@@ -0,0 +1,291 @@
+/*
+ * Copyright (C) 2006 Embedded Planet, LLC.
+ *
+ * Support for Embedded Planet EP82xxM boards.
+ * Tested on EP82xxM (MPC8270).
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc8260.h>
+#include <ioports.h>
+#include <asm/m8260_pci.h>
+#ifdef CONFIG_PCI
+#include <pci.h>
+#endif
+#include <miiphy.h>
+
+/*
+ * I/O Port configuration table
+ *
+ * if conf is 1, then that port pin will be configured at boot time
+ * according to the five values podr/pdir/ppar/psor/pdat for that entry
+ */
+
+#define CFG_FCC2 1
+#define CFG_FCC3 1
+
+const iop_conf_t iop_conf_tab[4][32] = {
+
+ /* Port A */
+ { /* conf ppar psor pdir podr pdat */
+ /* PA31 */ { 0, 0, 0, 0, 0, 1 }, /* PA31 */
+ /* PA30 */ { 0, 0, 0, 0, 0, 1 }, /* PA30 */
+ /* PA29 */ { 0, 0, 0, 0, 0, 1 }, /* PA29 */
+ /* PA28 */ { 0, 0, 0, 0, 0, 1 }, /* PA28 */
+ /* PA27 */ { 0, 0, 0, 0, 0, 1 }, /* PA27 */
+ /* PA26 */ { 0, 0, 0, 0, 0, 1 }, /* PA26 */
+ /* PA25 */ { 0, 0, 0, 0, 0, 1 }, /* PA25 */
+ /* PA24 */ { 0, 0, 0, 0, 0, 1 }, /* PA24 */
+ /* PA23 */ { 0, 0, 0, 0, 0, 1 }, /* PA23 */
+ /* PA22 */ { 0, 0, 0, 0, 0, 0 }, /* PA22 */
+ /* PA21 */ { 0, 0, 0, 0, 0, 1 }, /* PA21 */
+ /* PA20 */ { 0, 0, 0, 0, 0, 1 }, /* PA20 */
+ /* PA19 */ { 0, 0, 0, 0, 0, 1 }, /* PA19 */
+ /* PA18 */ { 0, 0, 0, 0, 0, 1 }, /* PA18 */
+ /* PA17 */ { 0, 0, 0, 0, 0, 1 }, /* PA17 */
+ /* PA16 */ { 0, 0, 0, 0, 0, 1 }, /* PA16 */
+ /* PA15 */ { 0, 0, 0, 0, 0, 1 }, /* PA15 */
+ /* PA14 */ { 0, 0, 0, 0, 0, 1 }, /* PA14 */
+ /* PA13 */ { 0, 0, 0, 0, 0, 1 }, /* PA13 */
+ /* PA12 */ { 0, 0, 0, 0, 0, 1 }, /* PA12 */
+ /* PA11 */ { 0, 0, 0, 0, 0, 1 }, /* PA11 */
+ /* PA10 */ { 0, 0, 0, 0, 0, 1 }, /* PA10 */
+ /* PA9 */ { 1, 1, 0, 1, 0, 1 }, /* SMC2 TxD */
+ /* PA8 */ { 1, 1, 0, 0, 0, 1 }, /* SMC2 RxD */
+ /* PA7 */ { 0, 0, 0, 0, 0, 1 }, /* PA7 */
+ /* PA6 */ { 0, 0, 0, 0, 0, 1 }, /* PA6 */
+ /* PA5 */ { 0, 0, 0, 0, 0, 1 }, /* PA5 */
+ /* PA4 */ { 0, 0, 0, 0, 0, 1 }, /* PA4 */
+ /* PA3 */ { 0, 0, 0, 0, 0, 1 }, /* PA3 */
+ /* PA2 */ { 0, 0, 0, 0, 0, 1 }, /* PA2 */
+ /* PA1 */ { 0, 0, 0, 0, 0, 1 }, /* PA1 */
+ /* PA0 */ { 0, 0, 0, 0, 0, 1 } /* PA0 */
+ },
+
+ /* Port B */
+ { /* conf ppar psor pdir podr pdat */
+ /* PB31 */ { CFG_FCC2, 1, 0, 1, 0, 0 }, /* FCC2 MII TX_ER */
+ /* PB30 */ { CFG_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_DV */
+ /* PB29 */ { CFG_FCC2, 1, 1, 1, 0, 0 }, /* FCC2 MII TX_EN */
+ /* PB28 */ { CFG_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_ER */
+ /* PB27 */ { CFG_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII COL */
+ /* PB26 */ { CFG_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII CRS */
+ /* PB25 */ { CFG_FCC2, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[3] */
+ /* PB24 */ { CFG_FCC2, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[2] */
+ /* PB23 */ { CFG_FCC2, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[1] */
+ /* PB22 */ { CFG_FCC2, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[0] */
+ /* PB21 */ { CFG_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[0] */
+ /* PB20 */ { CFG_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[1] */
+ /* PB19 */ { CFG_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[2] */
+ /* PB18 */ { CFG_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[3] */
+ /* PB17 */ { CFG_FCC3, 1, 0, 0, 0, 0 }, /* FCC3:RX_DIV */
+ /* PB16 */ { CFG_FCC3, 1, 0, 0, 0, 0 }, /* FCC3:RX_ERR */
+ /* PB15 */ { CFG_FCC3, 1, 0, 1, 0, 0 }, /* FCC3:TX_ERR */
+ /* PB14 */ { CFG_FCC3, 1, 0, 1, 0, 0 }, /* FCC3:TX_EN */
+ /* PB13 */ { CFG_FCC3, 1, 0, 0, 0, 0 }, /* FCC3:COL */
+ /* PB12 */ { CFG_FCC3, 1, 0, 0, 0, 0 }, /* FCC3:CRS */
+ /* PB11 */ { CFG_FCC3, 1, 0, 0, 0, 0 }, /* FCC3:RXD */
+ /* PB10 */ { CFG_FCC3, 1, 0, 0, 0, 0 }, /* FCC3:RXD */
+ /* PB9 */ { CFG_FCC3, 1, 0, 0, 0, 0 }, /* FCC3:RXD */
+ /* PB8 */ { CFG_FCC3, 1, 0, 0, 0, 0 }, /* FCC3:RXD */
+ /* PB7 */ { 0, 0, 0, 0, 0, 0 }, /* PB7 */
+ /* PB6 */ { CFG_FCC3, 1, 0, 1, 0, 0 }, /* FCC3:TXD */
+ /* PB5 */ { CFG_FCC3, 1, 0, 1, 0, 0 }, /* FCC3:TXD */
+ /* PB4 */ { CFG_FCC3, 1, 0, 1, 0, 0 }, /* FCC3:TXD */
+ /* PB3 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
+ /* PB2 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
+ /* PB1 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
+ /* PB0 */ { 0, 0, 0, 0, 0, 0 } /* non-existent */
+ },
+
+ /* Port C */
+ { /* conf ppar psor pdir podr pdat */
+ /* PC31 */ { 0, 0, 0, 0, 0, 0 }, /* PC31 */
+ /* PC30 */ { 0, 0, 0, 0, 0, 0 }, /* PC30 */
+ /* PC29 */ { 1, 1, 1, 0, 0, 0 }, /* SCC1 CTS# */
+ /* PC28 */ { 0, 0, 0, 0, 0, 0 }, /* PC28 */
+ /* PC27 */ { CFG_FCC3, 1, 0, 1, 0, 0 }, /* FCC3: TXD[0] */
+ /* PC26 */ { 0, 0, 0, 0, 0, 0 }, /* PC26 */
+ /* PC25 */ { 0, 0, 0, 0, 0, 0 }, /* PC25 */
+ /* PC24 */ { 0, 0, 0, 0, 0, 0 }, /* PC24 */
+ /* PC23 */ { 0, 0, 0, 0, 0, 0 }, /* PC23 */
+ /* PC22 */ { 0, 0, 0, 0, 0, 0 }, /* PC22 */
+ /* PC21 */ { 0, 0, 0, 0, 0, 0 }, /* PC21 */
+ /* PC20 */ { 0, 0, 0, 0, 0, 0 }, /* PC20 */
+ /* PC19 */ { CFG_FCC2, 1, 0, 0, 0, 0 }, /* RxClk (CLK13) */
+ /* PC18 */ { CFG_FCC2, 1, 0, 0, 0, 0 }, /* TxClk (CLK14) */
+ /* PC17 */ { CFG_FCC3, 1, 0, 0, 0, 0 }, /* RxClk (CLK15) */
+ /* PC16 */ { CFG_FCC3, 1, 0, 0, 0, 0 }, /* TxClk (CLK16) */
+ /* PC15 */ { 0, 0, 0, 0, 0, 0 }, /* PC15 */
+ /* PC14 */ { 1, 1, 0, 0, 0, 0 }, /* SCC1 CD# */
+ /* PC13 */ { 1, 1, 0, 0, 0, 0 }, /* SCC2 CTS# */
+ /* PC12 */ { 1, 1, 0, 0, 0, 0 }, /* SCC2 CD# */
+ /* PC11 */ { 0, 0, 0, 0, 0, 0 }, /* PC11 */
+ /* PC10 */ { 1, 1, 0, 0, 0, 0 }, /* SCC3 CD# */
+ /* PC9 */ { 0, 0, 0, 0, 0, 0 }, /* PC9 */
+ /* PC8 */ { 1, 1, 1, 0, 0, 0 }, /* SCC3 CTS# */
+ /* PC7 */ { 0, 0, 0, 0, 0, 0 }, /* PC7 */
+ /* PC6 */ { 0, 0, 0, 0, 0, 0 }, /* PC6 */
+ /* PC5 */ { 0, 0, 0, 0, 0, 0 }, /* PC5 */
+ /* PC4 */ { 0, 0, 0, 0, 0, 0 }, /* PC4 */
+ /* PC3 */ { 0, 0, 0, 0, 0, 0 }, /* PC3 */
+ /* PC2 */ { 0, 0, 0, 0, 0, 0 }, /* PC2 */
+ /* PC1 */ { 0, 0, 0, 0, 0, 0 }, /* PC1 */
+ /* PC0 */ { 0, 0, 0, 0, 0, 0 }, /* PC0 */
+ },
+
+ /* Port D */
+ { /* conf ppar psor pdir podr pdat */
+ /* PD31 */ { 1, 1, 0, 0, 0, 0 }, /* SCC1 RXD */
+ /* PD30 */ { 1, 1, 1, 1, 0, 1 }, /* SCC1 TXD */
+ /* PD29 */ { 1, 1, 0, 1, 0, 0 }, /* SCC1 RTS# */
+ /* PD28 */ { 1, 1, 0, 0, 0, 0 }, /* SCC2 RXD */
+ /* PD27 */ { 1, 1, 0, 1, 0, 0 }, /* SCC2 TXD */
+ /* PD26 */ { 1, 1, 0, 1, 0, 0 }, /* SCC2 RTS# */
+ /* PD25 */ { 1, 1, 0, 0, 0, 0 }, /* SCC3 RXD */
+ /* PD24 */ { 1, 1, 0, 1, 0, 0 }, /* SCC3 TXD */
+ /* PD23 */ { 1, 1, 0, 1, 0, 0 }, /* SCC3 RTS# */
+ /* PD22 */ { 0, 0, 0, 0, 0, 1 }, /* PD22 */
+ /* PD21 */ { 0, 0, 0, 0, 0, 1 }, /* PD21 */
+ /* PD20 */ { 0, 0, 0, 0, 0, 1 }, /* PD20 */
+ /* PD19 */ { 0, 0, 0, 0, 0, 1 }, /* PD19 */
+ /* PD18 */ { 0, 0, 0, 0, 0, 1 }, /* PD18 */
+ /* PD17 */ { 0, 0, 0, 0, 0, 1 }, /* PD17 */
+ /* PD16 */ { 0, 0, 0, 0, 0, 1 }, /* PD16 */
+ /* PD15 */ { 1, 1, 1, 0, 1, 1 }, /* I2C SDA */
+ /* PD14 */ { 1, 1, 1, 0, 1, 1 }, /* I2C SCL */
+ /* PD13 */ { 0, 0, 0, 0, 0, 1 }, /* PD13 */
+ /* PD12 */ { 0, 0, 0, 0, 0, 1 }, /* PD12 */
+ /* PD11 */ { 0, 0, 0, 0, 0, 1 }, /* PD11 */
+ /* PD10 */ { 0, 0, 0, 0, 0, 1 }, /* PD10 */
+ /* PD9 */ { 1, 1, 0, 1, 0, 1 }, /* SMC1 TxD */
+ /* PD8 */ { 1, 1, 0, 0, 0, 1 }, /* SMC1 RxD */
+ /* PD7 */ { 1, 1, 0, 0, 0, 1 }, /* SMC1 SMSYN */
+ /* PD6 */ { 0, 0, 0, 0, 0, 1 }, /* PD6 */
+ /* PD5 */ { 0, 0, 0, 0, 0, 1 }, /* PD5 */
+ /* PD4 */ { 0, 0, 0, 0, 0, 1 }, /* PD4 */
+ /* PD3 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
+ /* PD2 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
+ /* PD1 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
+ /* PD0 */ { 0, 0, 0, 0, 0, 0 } /* non-existent */
+ }
+};
+
+#ifdef CONFIG_PCI
+typedef struct pci_ic_s {
+ unsigned long pci_int_stat;
+ unsigned long pci_int_mask;
+}pci_ic_t;
+#endif
+
+int board_early_init_f (void)
+{
+ vu_char *bcsr = (vu_char *)CFG_BCSR;
+
+ bcsr[4] |= 0x30; /* Turn the LEDs off */
+
+#if defined(CONFIG_CONS_ON_SMC) || defined(CONFIG_KGDB_ON_SMC)
+ bcsr[6] |= 0x10;
+#endif
+#if defined(CONFIG_CONS_ON_SCC) || defined(CONFIG_KGDB_ON_SCC)
+ bcsr[7] |= 0x10;
+#endif
+
+#if CFG_FCC3
+ bcsr[8] |= 0xC0;
+#endif /* CFG_FCC3 */
+#if CFG_FCC2
+ bcsr[8] |= 0x30;
+#endif /* CFG_FCC2 */
+
+ return 0;
+}
+
+long int initdram(int board_type)
+{
+ /* Size in MB of SDRAM populated on board*/
+ long int msize = 256;
+
+#ifndef CFG_RAMBOOT
+ volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile memctl8260_t *memctl = &immap->im_memctl;
+ vu_char *ramaddr = (vu_char *)CFG_SDRAM_BASE;
+ uchar c = 0xFF;
+ uint psdmr = CFG_PSDMR;
+ int i;
+
+ unsigned char ramtmp;
+ unsigned char *ramptr1 = (unsigned char *)0x00000110;
+
+ memctl->memc_mptpr = CFG_MPTPR;
+
+udelay(400);
+
+ /* Initialise 60x bus SDRAM */
+ memctl->memc_psrt = CFG_PSRT;
+ memctl->memc_or1 = CFG_SDRAM_OR;
+ memctl->memc_br1 = CFG_SDRAM_BR;
+ memctl->memc_psdmr = psdmr;
+
+udelay(400);
+
+ memctl->memc_psdmr = psdmr | PSDMR_OP_PREA; /* Precharge all banks */
+ ramtmp = *ramptr1;
+ memctl->memc_psdmr = psdmr | PSDMR_OP_CBRR; /* CBR refresh */
+ for (i = 0; i < 8; i++) {
+ memctl->memc_psdmr = psdmr | PSDMR_OP_CBRR; /* CBR refresh */
+ }
+ ramtmp = *ramptr1;
+ memctl->memc_psdmr = psdmr | PSDMR_OP_MRW; /* Mode Register write */
+ *ramptr1 = 0xFF;
+ memctl->memc_psdmr = psdmr | PSDMR_RFEN; /* Refresh enable */
+#endif /* !CFG_RAMBOOT */
+
+ /* Return total 60x bus SDRAM size */
+ return msize * 1024 * 1024;
+}
+
+int checkboard(void)
+{
+ vu_char *bcsr = (vu_char *)CFG_BCSR;
+
+ puts("Board: ");
+ switch (bcsr[0]) {
+ case 0x0A:
+ printf("EP82xxM 1.0 CPLD revision %d\n", bcsr[1]);
+ break;
+ default:
+ printf("unknown: ID=%02X\n", bcsr[0]);
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_PCI
+struct pci_controller hose;
+
+extern void pci_mpc8250_init(struct pci_controller *);
+
+void pci_init_board(void)
+{
+ pci_mpc8250_init(&hose);
+}
+#endif
diff --git a/board/ep82xxm/u-boot.lds b/board/ep82xxm/u-boot.lds
new file mode 100644
index 0000000..18c4b46
--- /dev/null
+++ b/board/ep82xxm/u-boot.lds
@@ -0,0 +1,125 @@
+/*
+ * (C) Copyright 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Modified by Yuli Barcohen <yuli@arabellasw.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ cpu/mpc8260/start.o (.text)
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ . = ALIGN(16);
+ *(.rodata)
+ *(.rodata1)
+ *(.rodata.str1.4)
+ *(.eh_frame)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x0FFF) & 0xFFFFF000;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
+ __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(4096);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(4096);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
+ENTRY(_start)
diff --git a/board/ep88x/Makefile b/board/ep88x/Makefile
index 9123a80..b2ffd28 100644
--- a/board/ep88x/Makefile
+++ b/board/ep88x/Makefile
@@ -1,4 +1,7 @@
#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
# Copyright (C) 2004 Arabella Software Ltd.
# Yuli Barcohen <yuli@arabellasw.com>
#
@@ -23,12 +26,16 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := $(BOARD).o
+COBJS := $(BOARD).o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -38,9 +45,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/eric/Makefile b/board/eric/Makefile
index f55e7e2..f27fca6 100644
--- a/board/eric/Makefile
+++ b/board/eric/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,13 +23,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
SOBJS = init.o
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -39,9 +43,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/esd/adciop/Makefile b/board/esd/adciop/Makefile
index 67cf29b..4283300 100644
--- a/board/esd/adciop/Makefile
+++ b/board/esd/adciop/Makefile
@@ -1,6 +1,6 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,13 +23,20 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o ../common/misc.o ../common/pci.o
+COBJS = $(BOARD).o flash.o ../common/misc.o ../common/pci.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS)
- $(AR) crv $@ $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -39,9 +46,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/esd/apc405/Makefile b/board/esd/apc405/Makefile
index 8529ec7..024997e 100644
--- a/board/esd/apc405/Makefile
+++ b/board/esd/apc405/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000, 2001
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -22,13 +22,20 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o strataflash.o ../common/misc.o
+COBJS = $(BOARD).o strataflash.o ../common/misc.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $^
+ $(AR) $(ARFLAGS) $@ $^
clean:
rm -f $(SOBJS) $(OBJS)
@@ -38,9 +45,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/esd/ar405/Makefile b/board/esd/ar405/Makefile
index a60495a..4d75868 100644
--- a/board/esd/ar405/Makefile
+++ b/board/esd/ar405/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -22,13 +22,20 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o ../common/misc.o
+COBJS = $(BOARD).o flash.o ../common/misc.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -38,9 +45,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/esd/ash405/Makefile b/board/esd/ash405/Makefile
index a60495a..4d75868 100644
--- a/board/esd/ash405/Makefile
+++ b/board/esd/ash405/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -22,13 +22,20 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o ../common/misc.o
+COBJS = $(BOARD).o flash.o ../common/misc.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -38,9 +45,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/esd/canbt/Makefile b/board/esd/canbt/Makefile
index a60495a..4d75868 100644
--- a/board/esd/canbt/Makefile
+++ b/board/esd/canbt/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -22,13 +22,20 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o ../common/misc.o
+COBJS = $(BOARD).o flash.o ../common/misc.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -38,9 +45,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/esd/cms700/Makefile b/board/esd/cms700/Makefile
index a11ee82..df48766 100644
--- a/board/esd/cms700/Makefile
+++ b/board/esd/cms700/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -22,18 +22,25 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common/xilinx_jtag)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
# Objects for Xilinx JTAG programming (CPLD)
CPLD = ../common/xilinx_jtag/lenval.o \
../common/xilinx_jtag/micro.o \
../common/xilinx_jtag/ports.o
-OBJS = $(BOARD).o flash.o ../common/misc.o $(CPLD)
+COBJS = $(BOARD).o flash.o ../common/misc.o $(CPLD)
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -43,9 +50,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/esd/cpci2dp/Makefile b/board/esd/cpci2dp/Makefile
index 88b0ae3..2d4e189 100644
--- a/board/esd/cpci2dp/Makefile
+++ b/board/esd/cpci2dp/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -22,13 +22,20 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o ../common/misc.o ../common/cmd_loadpci.o
+COBJS = $(BOARD).o flash.o ../common/misc.o ../common/cmd_loadpci.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -38,9 +45,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/esd/cpci405/Makefile b/board/esd/cpci405/Makefile
index 9340a32..ce7876c 100644
--- a/board/esd/cpci405/Makefile
+++ b/board/esd/cpci405/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -22,13 +22,20 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o ../common/misc.o ../common/auto_update.o
+COBJS = $(BOARD).o flash.o ../common/misc.o ../common/auto_update.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -38,9 +45,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/esd/cpci440/Makefile b/board/esd/cpci440/Makefile
index 84d44fb..d13d31c 100644
--- a/board/esd/cpci440/Makefile
+++ b/board/esd/cpci440/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2002
+# (C) Copyright 2002-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -22,14 +22,21 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o strataflash.o ../common/misc.o
+COBJS = $(BOARD).o strataflash.o ../common/misc.o
SOBJS = init.o
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -39,9 +46,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/esd/cpci5200/Makefile b/board/esd/cpci5200/Makefile
index 2ca73a9..276eabb 100644
--- a/board/esd/cpci5200/Makefile
+++ b/board/esd/cpci5200/Makefile
@@ -1,6 +1,5 @@
-
#
-# (C) Copyright 2003
+# (C) Copyright 2003-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,19 +22,26 @@
#
include $(TOPDIR)/config.mk
+# ifneq ($(OBJTREE),$(SRCTREE))
+# $(shell mkdir -p $(obj)../common/xilinx_jtag)
+# endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
# Objects for Xilinx JTAG programming (CPLD)
# CPLD = ../common/xilinx_jtag/lenval.o \
# ../common/xilinx_jtag/micro.o \
# ../common/xilinx_jtag/ports.o
-# OBJS = $(BOARD).o flash.o $(CPLD)
-OBJS = $(BOARD).o strataflash.o
+# COBJS = $(BOARD).o flash.o $(CPLD)
+COBJS = $(BOARD).o strataflash.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -45,9 +51,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/esd/cpci5200/config.mk b/board/esd/cpci5200/config.mk
index 07b5de1..170779d 100644
--- a/board/esd/cpci5200/config.mk
+++ b/board/esd/cpci5200/config.mk
@@ -32,7 +32,7 @@
# 0x00100000 boot from RAM (for testing only)
#
-sinclude $(TOPDIR)/board/$(BOARDDIR)/config.tmp
+sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
ifndef TEXT_BASE
## Standard: boot high
diff --git a/board/esd/cpci750/Makefile b/board/esd/cpci750/Makefile
index cd38b2d..4379cfc 100644
--- a/board/esd/cpci750/Makefile
+++ b/board/esd/cpci750/Makefile
@@ -1,4 +1,7 @@
#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
# (C) Copyright 2001
# Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
#
@@ -22,23 +25,30 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../../Marvell/common)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
SOBJS = misc.o
-OBJS = $(BOARD).o serial.o ../../Marvell/common/memory.o pci.o \
+COBJS = $(BOARD).o serial.o ../../Marvell/common/memory.o pci.o \
mv_eth.o mpsc.o i2c.o \
sdram_init.o ide.o
-$(LIB): .depend $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/esd/cpciiser4/Makefile b/board/esd/cpciiser4/Makefile
index a60495a..4d75868 100644
--- a/board/esd/cpciiser4/Makefile
+++ b/board/esd/cpciiser4/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -22,13 +22,20 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o ../common/misc.o
+COBJS = $(BOARD).o flash.o ../common/misc.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -38,9 +45,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/esd/dasa_sim/Makefile b/board/esd/dasa_sim/Makefile
index e3b1c87..0822365 100644
--- a/board/esd/dasa_sim/Makefile
+++ b/board/esd/dasa_sim/Makefile
@@ -1,6 +1,6 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,13 +23,20 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o cmd_dasa_sim.o eeprom.o ../common/pci.o
+COBJS = $(BOARD).o flash.o cmd_dasa_sim.o eeprom.o ../common/pci.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS)
- $(AR) crv $@ $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -39,9 +46,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/esd/dp405/Makefile b/board/esd/dp405/Makefile
index a11ee82..df48766 100644
--- a/board/esd/dp405/Makefile
+++ b/board/esd/dp405/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -22,18 +22,25 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common/xilinx_jtag)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
# Objects for Xilinx JTAG programming (CPLD)
CPLD = ../common/xilinx_jtag/lenval.o \
../common/xilinx_jtag/micro.o \
../common/xilinx_jtag/ports.o
-OBJS = $(BOARD).o flash.o ../common/misc.o $(CPLD)
+COBJS = $(BOARD).o flash.o ../common/misc.o $(CPLD)
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -43,9 +50,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/esd/du405/Makefile b/board/esd/du405/Makefile
index 5ec4a4f..4d75868 100644
--- a/board/esd/du405/Makefile
+++ b/board/esd/du405/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000, 2001
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -22,13 +22,20 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o ../common/misc.o
+COBJS = $(BOARD).o flash.o ../common/misc.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -38,9 +45,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/esd/hh405/Makefile b/board/esd/hh405/Makefile
index 9340a32..ce7876c 100644
--- a/board/esd/hh405/Makefile
+++ b/board/esd/hh405/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -22,13 +22,20 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o ../common/misc.o ../common/auto_update.o
+COBJS = $(BOARD).o flash.o ../common/misc.o ../common/auto_update.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -38,9 +45,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/esd/hub405/Makefile b/board/esd/hub405/Makefile
index a60495a..4d75868 100644
--- a/board/esd/hub405/Makefile
+++ b/board/esd/hub405/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -22,13 +22,20 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o ../common/misc.o
+COBJS = $(BOARD).o flash.o ../common/misc.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -38,9 +45,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/esd/ocrtc/Makefile b/board/esd/ocrtc/Makefile
index b3039c6..99d87c4 100644
--- a/board/esd/ocrtc/Makefile
+++ b/board/esd/ocrtc/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -22,13 +22,20 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o ../common/misc.o cmd_ocrtc.o
+COBJS = $(BOARD).o flash.o ../common/misc.o cmd_ocrtc.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -38,9 +45,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/esd/pci405/Makefile b/board/esd/pci405/Makefile
index 6db564f..53f217f 100644
--- a/board/esd/pci405/Makefile
+++ b/board/esd/pci405/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -22,15 +22,22 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o ../common/misc.o cmd_pci405.o
+COBJS = $(BOARD).o flash.o ../common/misc.o cmd_pci405.o
SOBJS = writeibm.o
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
$(LIB): $(OBJS) $(SOBJS)
-# $(AR) crv $@ $(OBJS)
- $(AR) crv $@ $(OBJS) $(SOBJS)
+# $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -40,9 +47,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/esd/pf5200/Makefile b/board/esd/pf5200/Makefile
index 603bbe2..a47cd3d 100644
--- a/board/esd/pf5200/Makefile
+++ b/board/esd/pf5200/Makefile
@@ -1,6 +1,6 @@
#
-# (C) Copyright 2003
+# (C) Copyright 2003-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,19 +23,26 @@
#
include $(TOPDIR)/config.mk
+# ifneq ($(OBJTREE),$(SRCTREE))
+# $(shell mkdir -p $(obj)../common/xilinx_jtag)
+# endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
# Objects for Xilinx JTAG programming (CPLD)
# CPLD = ../common/xilinx_jtag/lenval.o \
# ../common/xilinx_jtag/micro.o \
# ../common/xilinx_jtag/ports.o
-# OBJS = $(BOARD).o flash.o $(CPLD)
-OBJS = $(BOARD).o flash.o
+# COBJS = $(BOARD).o flash.o $(CPLD)
+COBJS = $(BOARD).o flash.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -45,9 +52,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/esd/pf5200/config.mk b/board/esd/pf5200/config.mk
index 07b5de1..170779d 100644
--- a/board/esd/pf5200/config.mk
+++ b/board/esd/pf5200/config.mk
@@ -32,7 +32,7 @@
# 0x00100000 boot from RAM (for testing only)
#
-sinclude $(TOPDIR)/board/$(BOARDDIR)/config.tmp
+sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
ifndef TEXT_BASE
## Standard: boot high
diff --git a/board/esd/plu405/Makefile b/board/esd/plu405/Makefile
index 9340a32..ce7876c 100644
--- a/board/esd/plu405/Makefile
+++ b/board/esd/plu405/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -22,13 +22,20 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o ../common/misc.o ../common/auto_update.o
+COBJS = $(BOARD).o flash.o ../common/misc.o ../common/auto_update.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -38,9 +45,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/esd/pmc405/Makefile b/board/esd/pmc405/Makefile
index 741e4aa..50d0963 100644
--- a/board/esd/pmc405/Makefile
+++ b/board/esd/pmc405/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000, 2001
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -22,18 +22,25 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common/xilinx_jtag)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
# Objects for Xilinx JTAG programming (CPLD)
CPLD = ../common/xilinx_jtag/lenval.o \
../common/xilinx_jtag/micro.o \
../common/xilinx_jtag/ports.o
-OBJS = $(BOARD).o ../common/misc.o ../common/cmd_loadpci.o $(CPLD)
+COBJS = $(BOARD).o ../common/misc.o ../common/cmd_loadpci.o $(CPLD)
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -43,9 +50,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/esd/tasreg/Makefile b/board/esd/tasreg/Makefile
index e5d8446..cf07cf4 100644
--- a/board/esd/tasreg/Makefile
+++ b/board/esd/tasreg/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2003
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/esd/voh405/Makefile b/board/esd/voh405/Makefile
index a60495a..4d75868 100644
--- a/board/esd/voh405/Makefile
+++ b/board/esd/voh405/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -22,13 +22,20 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o ../common/misc.o
+COBJS = $(BOARD).o flash.o ../common/misc.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -38,9 +45,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/esd/vom405/Makefile b/board/esd/vom405/Makefile
index a11ee82..df48766 100644
--- a/board/esd/vom405/Makefile
+++ b/board/esd/vom405/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -22,18 +22,25 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common/xilinx_jtag)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
# Objects for Xilinx JTAG programming (CPLD)
CPLD = ../common/xilinx_jtag/lenval.o \
../common/xilinx_jtag/micro.o \
../common/xilinx_jtag/ports.o
-OBJS = $(BOARD).o flash.o ../common/misc.o $(CPLD)
+COBJS = $(BOARD).o flash.o ../common/misc.o $(CPLD)
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -43,9 +50,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/esd/wuh405/Makefile b/board/esd/wuh405/Makefile
index a60495a..4d75868 100644
--- a/board/esd/wuh405/Makefile
+++ b/board/esd/wuh405/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -22,13 +22,20 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o ../common/misc.o
+COBJS = $(BOARD).o flash.o ../common/misc.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -38,9 +45,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/esteem192e/Makefile b/board/esteem192e/Makefile
index 13ce9fc..cf07cf4 100644
--- a/board/esteem192e/Makefile
+++ b/board/esteem192e/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/etin/debris/Makefile b/board/etin/debris/Makefile
index 305a1bf..fdf7736 100644
--- a/board/etin/debris/Makefile
+++ b/board/etin/debris/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o phantom.o
+COBJS = $(BOARD).o flash.o phantom.o
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/etin/kvme080/Makefile b/board/etin/kvme080/Makefile
index 303ccfa..18b7350 100644
--- a/board/etin/kvme080/Makefile
+++ b/board/etin/kvme080/Makefile
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o multiverse.o
+COBJS = $(BOARD).o multiverse.o
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/etx094/Makefile b/board/etx094/Makefile
index 13ce9fc..cf07cf4 100644
--- a/board/etx094/Makefile
+++ b/board/etx094/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/evb4510/Makefile b/board/evb4510/Makefile
index 10850a9..4f98d70 100644
--- a/board/evb4510/Makefile
+++ b/board/evb4510/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2004
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,13 +23,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := evb4510.o flash.o
+COBJS := evb4510.o flash.o
SOBJS := lowlevel_init.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $^
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -39,9 +43,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/evb64260/Makefile b/board/evb64260/Makefile
index c493d6c..aa39baf 100644
--- a/board/evb64260/Makefile
+++ b/board/evb64260/Makefile
@@ -1,4 +1,7 @@
#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
# (C) Copyright 2001
# Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
#
@@ -23,22 +26,25 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
SOBJS = misc.o
-OBJS = $(BOARD).o flash.o serial.o memory.o pci.o \
+COBJS = $(BOARD).o flash.o serial.o memory.o pci.o \
eth.o eth_addrtbl.o mpsc.o i2c.o \
sdram_init.o zuma_pbb.o intel_flash.o zuma_pbb_mbox.o
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
-$(LIB): .depend $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS) $(SOBJS)
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/exbitgen/Makefile b/board/exbitgen/Makefile
index 34bd4b2..5e297af 100644
--- a/board/exbitgen/Makefile
+++ b/board/exbitgen/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,15 +23,18 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
SOBJS = init.o
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $^
+ $(AR) $(ARFLAGS) $@ $^
clean:
rm -f $(SOBJS) $(OBJS)
@@ -41,9 +44,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/ezkit533/Makefile b/board/ezkit533/Makefile
index c9b3c92..4f3c223 100644
--- a/board/ezkit533/Makefile
+++ b/board/ezkit533/Makefile
@@ -3,7 +3,7 @@
#
# Copyright (c) 2005 blackfin.uclinux.org
#
-# (C) Copyright 2000-2004
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -27,18 +27,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o ezkit533.o
+COBJS = $(BOARD).o flash.o ezkit533.o
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/fads/Makefile b/board/fads/Makefile
index 7fc88ee..667c6af 100644
--- a/board/fads/Makefile
+++ b/board/fads/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o lamp.o pcmcia.o
+COBJS = $(BOARD).o flash.o lamp.o pcmcia.o
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/flagadm/Makefile b/board/flagadm/Makefile
index 7a2014d..dcb1907 100644
--- a/board/flagadm/Makefile
+++ b/board/flagadm/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/funkwerk/vovpn-gw/Makefile b/board/funkwerk/vovpn-gw/Makefile
index f77cc60..a9a9299 100644
--- a/board/funkwerk/vovpn-gw/Makefile
+++ b/board/funkwerk/vovpn-gw/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,12 +23,16 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := $(BOARD).o flash.o m88e6060.o
+COBJS := $(BOARD).o flash.o m88e6060.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -38,9 +42,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/g2000/Makefile b/board/g2000/Makefile
index 5471d13..3c5aa86 100644
--- a/board/g2000/Makefile
+++ b/board/g2000/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,12 +23,16 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o strataflash.o
+COBJS = $(BOARD).o strataflash.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -38,9 +42,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/gcplus/Makefile b/board/gcplus/Makefile
index 1954d66..8a95d83 100644
--- a/board/gcplus/Makefile
+++ b/board/gcplus/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# 2003 (c) MontaVista Software, Inc.
@@ -25,13 +25,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := gcplus.o flash.o
+COBJS := gcplus.o flash.o
SOBJS := lowlevel_init.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -41,9 +45,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/gen860t/Makefile b/board/gen860t/Makefile
index dd7ecf1..fd34cb0 100644
--- a/board/gen860t/Makefile
+++ b/board/gen860t/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o beeper.o fpga.o ioport.o
+COBJS = $(BOARD).o flash.o beeper.o fpga.o ioport.o
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/genietv/Makefile b/board/genietv/Makefile
index 13ce9fc..cf07cf4 100644
--- a/board/genietv/Makefile
+++ b/board/genietv/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/gth/Makefile b/board/gth/Makefile
index 48f74cd..4b5c528 100644
--- a/board/gth/Makefile
+++ b/board/gth/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000, 2001
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o ee_access.o pcmcia.o
+COBJS = $(BOARD).o flash.o ee_access.o pcmcia.o
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/gth2/Makefile b/board/gth2/Makefile
index 8ef3a51..097ffec 100644
--- a/board/gth2/Makefile
+++ b/board/gth2/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2005
+# (C) Copyright 2005-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,19 +23,23 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o ee_access.o
+COBJS = $(BOARD).o flash.o ee_access.o
SOBJS = lowlevel_init.o
-$(LIB): .depend $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/gw8260/Makefile b/board/gw8260/Makefile
index 827a6ac..17012dd 100644
--- a/board/gw8260/Makefile
+++ b/board/gw8260/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000, 2001
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,13 +23,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := gw8260.o flash.o
+COBJS := gw8260.o flash.o
SOBJS :=
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -39,9 +43,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/hermes/Makefile b/board/hermes/Makefile
index 13ce9fc..cf07cf4 100644
--- a/board/hermes/Makefile
+++ b/board/hermes/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/hidden_dragon/Makefile b/board/hidden_dragon/Makefile
index b9f1df6..5aa02d4 100644
--- a/board/hidden_dragon/Makefile
+++ b/board/hidden_dragon/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2005
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/hmi1001/Makefile b/board/hmi1001/Makefile
index ed36ea7..ddfd2ef 100644
--- a/board/hmi1001/Makefile
+++ b/board/hmi1001/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2003-2004
+# (C) Copyright 2003-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,12 +23,16 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := $(BOARD).o
+COBJS := $(BOARD).o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -38,9 +42,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/hymod/Makefile b/board/hymod/Makefile
index b52af9a..1fb7e79 100644
--- a/board/hymod/Makefile
+++ b/board/hymod/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o bsp.o eeprom.o fetch.o input.o env.o
+COBJS = $(BOARD).o flash.o bsp.o eeprom.o fetch.o input.o env.o
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/icecube/Makefile b/board/icecube/Makefile
index eb5ed59..7762ed3 100644
--- a/board/icecube/Makefile
+++ b/board/icecube/Makefile
@@ -1,6 +1,6 @@
#
-# (C) Copyright 2003
+# (C) Copyright 2003-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -24,12 +24,16 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := $(BOARD).o flash.o
+COBJS := $(BOARD).o flash.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -39,9 +43,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/icecube/config.mk b/board/icecube/config.mk
index 07b5de1..170779d 100644
--- a/board/icecube/config.mk
+++ b/board/icecube/config.mk
@@ -32,7 +32,7 @@
# 0x00100000 boot from RAM (for testing only)
#
-sinclude $(TOPDIR)/board/$(BOARDDIR)/config.tmp
+sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
ifndef TEXT_BASE
## Standard: boot high
diff --git a/board/icu862/Makefile b/board/icu862/Makefile
index 7b2b545..2b10b0c 100644
--- a/board/icu862/Makefile
+++ b/board/icu862/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o pcmcia.o
+COBJS = $(BOARD).o flash.o pcmcia.o
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/ids8247/Makefile b/board/ids8247/Makefile
index cfef750..4c9634c 100644
--- a/board/ids8247/Makefile
+++ b/board/ids8247/Makefile
@@ -1,4 +1,7 @@
#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
# (C) Copyright 2005
# Heiko Schocher, DENX Software Engineering, <hs@denx.de>
#
@@ -23,18 +26,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/impa7/Makefile b/board/impa7/Makefile
index 08543f9..b64d85f 100644
--- a/board/impa7/Makefile
+++ b/board/impa7/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,13 +23,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := impa7.o flash.o
+COBJS := impa7.o flash.o
SOBJS := lowlevel_init.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -39,9 +43,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/incaip/Makefile b/board/incaip/Makefile
index d9b0e2d..afe02c2 100644
--- a/board/incaip/Makefile
+++ b/board/incaip/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2003
+# (C) Copyright 2003-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,19 +23,23 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
SOBJS = lowlevel_init.o
-$(LIB): .depend $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/inka4x0/Makefile b/board/inka4x0/Makefile
index bf83292..8aa7e7c 100644
--- a/board/inka4x0/Makefile
+++ b/board/inka4x0/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2003-2004
+# (C) Copyright 2003-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,12 +23,16 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := $(BOARD).o flash.o
+COBJS := $(BOARD).o flash.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -38,9 +42,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/innokom/Makefile b/board/innokom/Makefile
index 73f6a74..71c6bba 100644
--- a/board/innokom/Makefile
+++ b/board/innokom/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,13 +23,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := innokom.o flash.o
+COBJS := innokom.o flash.o
SOBJS := lowlevel_init.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -39,9 +43,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/integratorap/Makefile b/board/integratorap/Makefile
index 358df62..505121e 100644
--- a/board/integratorap/Makefile
+++ b/board/integratorap/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2004
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# (C) Copyright 2004
@@ -27,13 +27,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := integratorap.o flash.o
+COBJS := integratorap.o flash.o
SOBJS := lowlevel_init.o memsetup.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $^
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -43,9 +47,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/integratorap/config.mk b/board/integratorap/config.mk
index 25b79b3..e4c5c3b 100644
--- a/board/integratorap/config.mk
+++ b/board/integratorap/config.mk
@@ -3,3 +3,9 @@
#
TEXT_BASE = 0x01000000
+
+ifneq ($(OBJTREE),$(SRCTREE))
+# We are building u-boot in a separate directory, use generated
+# .lds script from OBJTREE directory.
+LDSCRIPT := $(OBJTREE)/board/$(BOARDDIR)/u-boot.lds
+endif
diff --git a/board/integratorap/split_by_variant.sh b/board/integratorap/split_by_variant.sh
index 9f71bab..53b0d1e 100755
--- a/board/integratorap/split_by_variant.sh
+++ b/board/integratorap/split_by_variant.sh
@@ -103,14 +103,17 @@
echo -n "#undef CONFIG_CM_TCRAM " >> tmp.fil
echo " /* CM may not have TCRAM */" >> tmp.fil
fi
-mv tmp.fil ./include/config.h
+
+mkdir -p ${obj}include
+mkdir -p ${obj}board/integratorap
+mv tmp.fil ${obj}include/config.h
# ---------------------------------------------------------
# Ensure correct core object loaded first in U-Boot image
# ---------------------------------------------------------
-sed -r 's/CPU_FILE/cpu\/'$cpu'\/start.o/; s/#.*//' board/integratorap/u-boot.lds.template > board/integratorap/u-boot.lds
+sed -r 's/CPU_FILE/cpu\/'$cpu'\/start.o/; s/#.*//' ${src}board/integratorap/u-boot.lds.template > ${obj}board/integratorap/u-boot.lds
# ---------------------------------------------------------
# Complete the configuration
# ---------------------------------------------------------
-./mkconfig -a integratorap arm $cpu integratorap;
+$MKCONFIG -a integratorap arm $cpu integratorap;
echo "Variant:: $variant with core $cpu"
diff --git a/board/integratorcp/Makefile b/board/integratorcp/Makefile
index 3d589fc..e15ef73 100644
--- a/board/integratorcp/Makefile
+++ b/board/integratorcp/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2004
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,13 +23,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := integratorcp.o flash.o
+COBJS := integratorcp.o flash.o
SOBJS := lowlevel_init.o memsetup.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $^
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -39,9 +43,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/integratorcp/config.mk b/board/integratorcp/config.mk
index 25b79b3..e4c5c3b 100644
--- a/board/integratorcp/config.mk
+++ b/board/integratorcp/config.mk
@@ -3,3 +3,9 @@
#
TEXT_BASE = 0x01000000
+
+ifneq ($(OBJTREE),$(SRCTREE))
+# We are building u-boot in a separate directory, use generated
+# .lds script from OBJTREE directory.
+LDSCRIPT := $(OBJTREE)/board/$(BOARDDIR)/u-boot.lds
+endif
diff --git a/board/integratorcp/split_by_variant.sh b/board/integratorcp/split_by_variant.sh
index 3a35433..37ae517 100755
--- a/board/integratorcp/split_by_variant.sh
+++ b/board/integratorcp/split_by_variant.sh
@@ -98,14 +98,17 @@
echo -n "#undef CONFIG_CM_TCRAM " >> tmp.fil
echo " /* CM may not have TCRAM */" >> tmp.fil
fi
-mv tmp.fil ./include/config.h
+
+mkdir -p ${obj}include
+mkdir -p ${obj}board/integratorcp
+mv tmp.fil ${obj}include/config.h
# ---------------------------------------------------------
# Ensure correct core object loaded first in U-Boot image
# ---------------------------------------------------------
-sed -r 's/CPU_FILE/cpu\/'$cpu'\/start.o/; s/#.*//' board/integratorcp/u-boot.lds.template > board/integratorcp/u-boot.lds
+sed -r 's/CPU_FILE/cpu\/'$cpu'\/start.o/; s/#.*//' ${src}board/integratorcp/u-boot.lds.template > ${obj}board/integratorcp/u-boot.lds
# ---------------------------------------------------------
# Complete the configuration
# ---------------------------------------------------------
-./mkconfig -a integratorcp arm $cpu integratorcp;
+$MKCONFIG -a integratorcp arm $cpu integratorcp;
echo "Variant:: $variant with core $cpu"
diff --git a/board/ip860/Makefile b/board/ip860/Makefile
index 13ce9fc..cf07cf4 100644
--- a/board/ip860/Makefile
+++ b/board/ip860/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/iphase4539/Makefile b/board/iphase4539/Makefile
index 19da5d0..3a28f5c 100644
--- a/board/iphase4539/Makefile
+++ b/board/iphase4539/Makefile
@@ -1,4 +1,7 @@
#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
# (C) Copyright 2002 Wolfgang Grandegger <wg@denx.de>
#
# See file CREDITS for list of people who contributed to this
@@ -22,12 +25,16 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := $(BOARD).o flash.o
+COBJS := $(BOARD).o flash.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -37,9 +44,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/ispan/Makefile b/board/ispan/Makefile
index 9123a80..b2ffd28 100644
--- a/board/ispan/Makefile
+++ b/board/ispan/Makefile
@@ -1,4 +1,7 @@
#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
# Copyright (C) 2004 Arabella Software Ltd.
# Yuli Barcohen <yuli@arabellasw.com>
#
@@ -23,12 +26,16 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := $(BOARD).o
+COBJS := $(BOARD).o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -38,9 +45,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/ivm/Makefile b/board/ivm/Makefile
index 13ce9fc..cf07cf4 100644
--- a/board/ivm/Makefile
+++ b/board/ivm/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/ixdp425/Makefile b/board/ixdp425/Makefile
index 59d6964..5d4feb0 100644
--- a/board/ixdp425/Makefile
+++ b/board/ixdp425/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000, 2002
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,12 +23,16 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := ixdp425.o
+COBJS := ixdp425.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $^
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -38,9 +42,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/ixdp425/config.mk b/board/ixdp425/config.mk
index 3420586..d49c0e7 100644
--- a/board/ixdp425/config.mk
+++ b/board/ixdp425/config.mk
@@ -1,4 +1,4 @@
TEXT_BASE = 0x00f80000
# include NPE ethernet driver
-BOARDLIBS = cpu/ixp/npe/libnpe.a
+BOARDLIBS = $(obj)cpu/ixp/npe/libnpe.a
diff --git a/board/jse/Makefile b/board/jse/Makefile
index 0da27b6..e858c83 100644
--- a/board/jse/Makefile
+++ b/board/jse/Makefile
@@ -1,4 +1,7 @@
#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
# Copyright 2004 Picture Elements, Inc.
# Stephen Williams <steve@icarus.com>
#
@@ -20,13 +23,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o sdram.o flash.o host_bridge.o
+COBJS = $(BOARD).o sdram.o flash.o host_bridge.o
SOBJS = init.o
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -36,9 +43,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/kb9202/Makefile b/board/kb9202/Makefile
index f36d88d..0207d12 100644
--- a/board/kb9202/Makefile
+++ b/board/kb9202/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2003
+# (C) Copyright 2003-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -26,12 +26,16 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := kb9202.o
+COBJS := kb9202.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -41,9 +45,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/kup/Makefile b/board/kup/Makefile
index 071f0d2..957b3d3 100644
--- a/board/kup/Makefile
+++ b/board/kup/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2004
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o kup.o
+COBJS = $(BOARD).o flash.o kup.o
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/kup/kup4k/Makefile b/board/kup/kup4k/Makefile
index 4a3954c..4727a5b 100644
--- a/board/kup/kup4k/Makefile
+++ b/board/kup/kup4k/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2004
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -22,19 +22,26 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o ../common/flash.o ../common/kup.o ../common/load_sernum_ethaddr.o ../common/pcmcia.o
+COBJS = $(BOARD).o ../common/flash.o ../common/kup.o ../common/load_sernum_ethaddr.o ../common/pcmcia.o
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/kup/kup4x/Makefile b/board/kup/kup4x/Makefile
index 4a3954c..4727a5b 100644
--- a/board/kup/kup4x/Makefile
+++ b/board/kup/kup4x/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2004
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -22,19 +22,26 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o ../common/flash.o ../common/kup.o ../common/load_sernum_ethaddr.o ../common/pcmcia.o
+COBJS = $(BOARD).o ../common/flash.o ../common/kup.o ../common/load_sernum_ethaddr.o ../common/pcmcia.o
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/lantec/Makefile b/board/lantec/Makefile
index 7a2014d..dcb1907 100644
--- a/board/lantec/Makefile
+++ b/board/lantec/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/lart/Makefile b/board/lart/Makefile
index 550aa1d..cbc07bd 100644
--- a/board/lart/Makefile
+++ b/board/lart/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,13 +23,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := lart.o flash.o
+COBJS := lart.o flash.o
SOBJS := flashasm.o lowlevel_init.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -39,9 +43,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/logodl/Makefile b/board/logodl/Makefile
index c7cde7d..0c88a6e 100644
--- a/board/logodl/Makefile
+++ b/board/logodl/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,13 +23,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := logodl.o flash.o
+COBJS := logodl.o flash.o
SOBJS := lowlevel_init.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $^
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -39,9 +43,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/lpd7a40x/Makefile b/board/lpd7a40x/Makefile
index ebe14df..0e302d9 100644
--- a/board/lpd7a40x/Makefile
+++ b/board/lpd7a40x/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000, 2001, 2002
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,13 +23,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := lpd7a40x.o flash.o
+COBJS := lpd7a40x.o flash.o
SOBJS := lowlevel_init.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -39,9 +43,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/lubbock/Makefile b/board/lubbock/Makefile
index 106622c..8e397b4 100644
--- a/board/lubbock/Makefile
+++ b/board/lubbock/Makefile
@@ -1,6 +1,6 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -24,13 +24,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := lubbock.o flash.o
+COBJS := lubbock.o flash.o
SOBJS := lowlevel_init.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -40,9 +44,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/lwmon/Makefile b/board/lwmon/Makefile
index 7b2b545..2b10b0c 100644
--- a/board/lwmon/Makefile
+++ b/board/lwmon/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o pcmcia.o
+COBJS = $(BOARD).o flash.o pcmcia.o
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/m5271evb/Makefile b/board/m5271evb/Makefile
index 34de983..424ab1c 100644
--- a/board/m5271evb/Makefile
+++ b/board/m5271evb/Makefile
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o
+COBJS = $(BOARD).o
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/m5272c3/Makefile b/board/m5272c3/Makefile
index e5d8446..cf07cf4 100644
--- a/board/m5272c3/Makefile
+++ b/board/m5272c3/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2003
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/m5282evb/Makefile b/board/m5282evb/Makefile
index e5d8446..cf07cf4 100644
--- a/board/m5282evb/Makefile
+++ b/board/m5282evb/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2003
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/mbx8xx/Makefile b/board/mbx8xx/Makefile
index e4d1099..d30cc62 100644
--- a/board/mbx8xx/Makefile
+++ b/board/mbx8xx/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o vpd.o pcmcia.o
+COBJS = $(BOARD).o flash.o vpd.o pcmcia.o
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/mcc200/Makefile b/board/mcc200/Makefile
index 7fdc088..75808cb 100644
--- a/board/mcc200/Makefile
+++ b/board/mcc200/Makefile
@@ -23,12 +23,16 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := $(BOARD).o
+COBJS := $(BOARD).o lcd.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -38,9 +42,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/mcc200/config.mk b/board/mcc200/config.mk
index a822559..d0f9289 100644
--- a/board/mcc200/config.mk
+++ b/board/mcc200/config.mk
@@ -22,7 +22,7 @@
#
#
-# MCC200 board:
+# MCC200, PRS200 boards:
#
# Valid values for TEXT_BASE are:
#
@@ -31,7 +31,7 @@
# 0x00100000 boot from RAM (for testing only)
#
-sinclude $(TOPDIR)/board/$(BOARDDIR)/config.tmp
+sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
ifndef TEXT_BASE
## Standard: boot low
diff --git a/board/mcc200/lcd.c b/board/mcc200/lcd.c
new file mode 100644
index 0000000..b262516
--- /dev/null
+++ b/board/mcc200/lcd.c
@@ -0,0 +1,190 @@
+/*
+ * (C) Copyright 2006
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <lcd.h>
+#include <mpc5xxx.h>
+
+#ifdef CONFIG_LCD
+
+#define SWAPPED_LCD
+/*
+ * The name of the device used for communication
+ * with the PSoC.
+ */
+#define PSOC_PSC MPC5XXX_PSC2
+#define PSOC_BAUD 500000UL
+
+#define RTS_ASSERT 1
+#define RTS_NEGATE 0
+#define CTS_ASSERT 1
+#define CTS_NEGATE 0
+
+/*
+ * Dimensions in pixels
+ */
+#define LCD_WIDTH 160
+#define LCD_HEIGHT 100
+
+/*
+ * Dimensions in bytes
+ */
+#define LCD_BUF_SIZE ((LCD_WIDTH*LCD_HEIGHT)>>3)
+
+#if LCD_BPP != LCD_MONOCHROME
+#error "MCC200 support only monochrome displays (1 bpp)!"
+#endif
+
+#define PSOC_RETRIES 10 /* each of PSOC_WAIT_TIME */
+#define PSOC_WAIT_TIME 10 /* usec */
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * LCD information
+ */
+vidinfo_t panel_info = {
+ LCD_WIDTH, LCD_HEIGHT, LCD_BPP
+};
+
+int lcd_line_length;
+
+int lcd_color_fg;
+int lcd_color_bg;
+
+/*
+ * Frame buffer memory information
+ */
+void *lcd_base; /* Start of framebuffer memory */
+void *lcd_console_address; /* Start of console buffer */
+
+short console_col = 0;
+short console_row = 0;
+
+/*
+ * The device we use to communicate with PSoC
+ */
+int serial_inited = 0;
+
+/*
+ * Exported functions
+ */
+void lcd_initcolregs (void);
+void lcd_ctrl_init (void *lcdbase);
+void lcd_enable (void);
+
+/*
+ * Imported functions to support the PSoC protocol
+ */
+extern int serial_init_dev (unsigned long dev_base);
+extern void serial_setrts_dev (unsigned long dev_base, int s);
+extern int serial_getcts_dev (unsigned long dev_base);
+extern void serial_putc_raw_dev(unsigned long dev_base, const char c);
+
+/*
+ * Just stubs for our driver, needed for compiling compabilty with
+ * the common LCD driver code.
+ */
+void lcd_initcolregs (void)
+{
+}
+
+void lcd_ctrl_init (void *lcdbase)
+{
+}
+
+/*
+ * Function sends the contents of the frame-buffer to the LCD
+ */
+void lcd_enable (void)
+{
+ int i, retries, fb_size;
+
+ if (!serial_inited) {
+ unsigned long baud;
+
+ baud = gd->baudrate;
+ gd->baudrate = PSOC_BAUD;
+ serial_init_dev(PSOC_PSC);
+ gd->baudrate = baud;
+ serial_setrts_dev (PSOC_PSC, RTS_ASSERT);
+ serial_inited = 1;
+ }
+
+ /*
+ * Implement PSoC communication protocol:
+ * 1. Assert RTS, wait CTS assertion
+ * 2. Transmit data
+ * 3. Negate RTS, wait CTS negation
+ */
+
+ /* 1 */
+ serial_setrts_dev (PSOC_PSC, RTS_ASSERT);
+ for (retries = PSOC_RETRIES; retries; retries--) {
+ if (serial_getcts_dev(PSOC_PSC) == CTS_ASSERT)
+ break;
+ udelay (PSOC_WAIT_TIME);
+ }
+ if (!retries) {
+ printf ("%s Error: PSoC doesn't respond on "
+ "RTS ASSERT\n", __FUNCTION__);
+ }
+
+ /* 2 */
+ fb_size = panel_info.vl_row * (panel_info.vl_col >> 3);
+
+#if !defined(SWAPPED_LCD)
+ for (i=0; i<fb_size; i++) {
+ serial_putc_raw_dev (PSOC_PSC, ((char *)lcd_base)[i]);
+ }
+#else
+ {
+ int x, y, pwidth;
+ char *p = (char *)lcd_base;
+
+ pwidth = ((panel_info.vl_col+7) >> 3);
+ for (y=0; y<panel_info.vl_row; y++) {
+ i = y * pwidth;
+ for (x=0; x<pwidth; x+=5) {
+ serial_putc_raw_dev (PSOC_PSC, (p[i+x+2]<<4 & 0xF0) | (p[i+x+3]>>4 & 0x0F));
+ serial_putc_raw_dev (PSOC_PSC, (p[i+x+3]<<4 & 0xF0) | (p[i+x+4]>>4 & 0x0F));
+ serial_putc_raw_dev (PSOC_PSC, (p[i+x+4]<<4 & 0xF0) | (p[i+x]>>4 & 0x0F));
+ serial_putc_raw_dev (PSOC_PSC, (p[i+x]<<4 & 0xF0) | (p[i+x+1]>>4 & 0x0F));
+ serial_putc_raw_dev (PSOC_PSC, (p[i+x+1]<<4 & 0xF0) | (p[i+x+2]>>4 & 0x0F));
+ }
+ }
+ }
+#endif
+
+ /* 3 */
+ serial_setrts_dev (PSOC_PSC, RTS_NEGATE);
+ for (retries = PSOC_RETRIES; retries; retries--) {
+ if (serial_getcts_dev(PSOC_PSC) == CTS_NEGATE)
+ break;
+ udelay (PSOC_WAIT_TIME);
+ }
+ if (!retries) {
+ printf ("%s Error: PSoC doesn't respond on "
+ "RTS NEGATE\n", __FUNCTION__);
+ }
+
+ return;
+}
+#endif /* CONFIG_LCD */
diff --git a/board/mcc200/mcc200.c b/board/mcc200/mcc200.c
index 775030c..71a691b 100644
--- a/board/mcc200/mcc200.c
+++ b/board/mcc200/mcc200.c
@@ -197,7 +197,11 @@
int checkboard (void)
{
+#if defined(CONFIG_PRS200)
+ puts ("Board: PRS200\n");
+#else
puts ("Board: MCC200\n");
+#endif
return 0;
}
@@ -261,8 +265,8 @@
*(volatile int*)MPC5XXX_CS0_CFG &= ~(1 << 6);
printf ("Warning: Only 32 of 64 MB of Flash are accessible from U-Boot\n");
flash_info[0].size = 32 << 20;
- for (snum = 0, flash_sup_end = gd->bd->bi_flashstart + (32<<20);
- flash_info[0].start[snum] < flash_sup_end;
+ for (snum = 0, flash_sup_end = gd->bd->bi_flashstart + (32<<20);
+ flash_info[0].start[snum] < flash_sup_end;
snum++);
flash_info[0].sector_count = snum;
}
diff --git a/board/ml2/Makefile b/board/ml2/Makefile
index 40c60b1..731e8fe 100644
--- a/board/ml2/Makefile
+++ b/board/ml2/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,13 +23,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o serial.o
+COBJS = $(BOARD).o flash.o serial.o
SOBJS = init.o
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -39,9 +43,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/modnet50/Makefile b/board/modnet50/Makefile
index ab2c376..45141fd 100644
--- a/board/modnet50/Makefile
+++ b/board/modnet50/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2004
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,13 +23,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := modnet50.o flash.o
+COBJS := modnet50.o flash.o
SOBJS := lowlevel_init.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $^
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -39,9 +43,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/mousse/Makefile b/board/mousse/Makefile
index ddc5546..3e719f0 100644
--- a/board/mousse/Makefile
+++ b/board/mousse/Makefile
@@ -1,6 +1,6 @@
#
-# (C) Copyright 2001
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -24,18 +24,21 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o m48t59y.o pci.o flash.o
+COBJS = $(BOARD).o m48t59y.o pci.o flash.o
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/mp2usb/Makefile b/board/mp2usb/Makefile
index b6ea3cf..423d77d 100644
--- a/board/mp2usb/Makefile
+++ b/board/mp2usb/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2003
+# (C) Copyright 2003-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,12 +23,16 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := mp2usb.o flash.o
+COBJS := mp2usb.o flash.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -38,9 +42,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/mpc8260ads/Makefile b/board/mpc8260ads/Makefile
index cc519d1..de7d847 100644
--- a/board/mpc8260ads/Makefile
+++ b/board/mpc8260ads/Makefile
@@ -1,6 +1,6 @@
#
-# (C) Copyright 2001
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -24,12 +24,16 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := $(BOARD).o flash.o
+COBJS := $(BOARD).o flash.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -39,9 +43,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/mpc8260ads/config.mk b/board/mpc8260ads/config.mk
index eb6f7c9..e99e181 100644
--- a/board/mpc8260ads/config.mk
+++ b/board/mpc8260ads/config.mk
@@ -29,7 +29,7 @@
# MPC8260ADS, MPC8266ADS, and PQ2FADS-ZU/VR boards
#
-sinclude $(TOPDIR)/board/$(BOARDDIR)/config.tmp
+sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
ifndef TEXT_BASE
## Standard: boot high
diff --git a/board/mpc8266ads/Makefile b/board/mpc8266ads/Makefile
index cd0f40b..291a1c9 100644
--- a/board/mpc8266ads/Makefile
+++ b/board/mpc8266ads/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,12 +23,16 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := $(BOARD).o flash.o
+COBJS := $(BOARD).o flash.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -38,9 +42,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/mpc8349emds/Makefile b/board/mpc8349emds/Makefile
index 38bbb67..acc9544 100644
--- a/board/mpc8349emds/Makefile
+++ b/board/mpc8349emds/Makefile
@@ -23,12 +23,16 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := $(BOARD).o
+COBJS := $(BOARD).o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -38,9 +42,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/mpc8540ads/Makefile b/board/mpc8540ads/Makefile
index 5d8ea34..2913650 100644
--- a/board/mpc8540ads/Makefile
+++ b/board/mpc8540ads/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,14 +23,18 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := $(BOARD).o
+COBJS := $(BOARD).o
SOBJS := init.o
#SOBJS :=
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(OBJS) $(SOBJS)
@@ -40,9 +44,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/mpc8540eval/Makefile b/board/mpc8540eval/Makefile
index 6f1995e..d649c60 100644
--- a/board/mpc8540eval/Makefile
+++ b/board/mpc8540eval/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,15 +23,19 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := $(BOARD).o flash.o
-#OBJS := $(BOARD).o flash.o $(BOARD)_slave.o
+COBJS := $(BOARD).o flash.o
+#COBJS := $(BOARD).o flash.o $(BOARD)_slave.o
SOBJS := init.o
#SOBJS :=
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(OBJS) $(SOBJS)
@@ -41,9 +45,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/mpc8560ads/Makefile b/board/mpc8560ads/Makefile
index 5d8ea34..2913650 100644
--- a/board/mpc8560ads/Makefile
+++ b/board/mpc8560ads/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,14 +23,18 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := $(BOARD).o
+COBJS := $(BOARD).o
SOBJS := init.o
#SOBJS :=
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(OBJS) $(SOBJS)
@@ -40,9 +44,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/mpl/mip405/Makefile b/board/mpl/mip405/Makefile
index 9276f64..f8f4329 100644
--- a/board/mpl/mip405/Makefile
+++ b/board/mpl/mip405/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000, 2001
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -22,16 +22,23 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o ../common/flash.o cmd_mip405.o ../common/pci.o \
+COBJS = $(BOARD).o ../common/flash.o cmd_mip405.o ../common/pci.o \
../common/usb_uhci.o ../common/memtst.o ../common/common_util.o
SOBJS = init.o
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -41,9 +48,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/mpl/pati/Makefile b/board/mpl/pati/Makefile
index 1a9ce12..82c97d6 100644
--- a/board/mpl/pati/Makefile
+++ b/board/mpl/pati/Makefile
@@ -1,6 +1,6 @@
#
-# (C) Copyright 2001 Wolfgang Denk, DENX Software Engineering, wd@denx.de
-#
+# (C) Copyright 2001-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de
#
# See file CREDITS for list of people who contributed to this
# project.
@@ -22,15 +22,21 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := pati.o ../common/flash.o ../common/memtst.o cmd_pati.o ../common/common_util.o
+COBJS := pati.o ../common/flash.o ../common/memtst.o cmd_pati.o ../common/common_util.o
#### cmd_pati.o
-SOBJS :=
-$(LIB): $(OBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -40,9 +46,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/mpl/pip405/Makefile b/board/mpl/pip405/Makefile
index a818d08..72143f0 100644
--- a/board/mpl/pip405/Makefile
+++ b/board/mpl/pip405/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000, 2001
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -22,10 +22,13 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o \
+COBJS = $(BOARD).o \
../common/flash.o cmd_pip405.o ../common/pci.o \
../common/isa.o ../common/kbd.o \
../common/usb_uhci.o \
@@ -33,8 +36,12 @@
SOBJS = init.o
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -44,9 +51,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/mpl/vcma9/Makefile b/board/mpl/vcma9/Makefile
index 304c965..209322e 100644
--- a/board/mpl/vcma9/Makefile
+++ b/board/mpl/vcma9/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000, 2001, 2002
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -22,16 +22,23 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := vcma9.o flash.o cmd_vcma9.o
-OBJS += ../common/common_util.o ../common/memtst.o
+COBJS := vcma9.o flash.o cmd_vcma9.o
+COBJS += ../common/common_util.o ../common/memtst.o
SOBJS := lowlevel_init.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -41,9 +48,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/musenki/Makefile b/board/musenki/Makefile
index 24dc026..dcb1907 100644
--- a/board/musenki/Makefile
+++ b/board/musenki/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,19 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
-SOBJS =
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/mvblue/Makefile b/board/mvblue/Makefile
index 24dc026..dcb1907 100644
--- a/board/mvblue/Makefile
+++ b/board/mvblue/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,19 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
-SOBJS =
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/mvs1/Makefile b/board/mvs1/Makefile
index 13ce9fc..cf07cf4 100644
--- a/board/mvs1/Makefile
+++ b/board/mvs1/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/mx1ads/Makefile b/board/mx1ads/Makefile
index 3e805fe..14a8b81 100644
--- a/board/mx1ads/Makefile
+++ b/board/mx1ads/Makefile
@@ -1,6 +1,9 @@
#
# board/mx1ads/Makefile
#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
# (c) Copyright 2004
# Techware Information Technology, Inc.
# http://www.techware.com.tw/
@@ -24,13 +27,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := mx1ads.o syncflash.o
+COBJS := mx1ads.o syncflash.o
SOBJS := lowlevel_init.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -40,9 +47,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/mx1fs2/Makefile b/board/mx1fs2/Makefile
index 9e3bca1..516a8b9 100644
--- a/board/mx1fs2/Makefile
+++ b/board/mx1fs2/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2004
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,13 +23,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := mx1fs2.o flash.o
+COBJS := mx1fs2.o flash.o
SOBJS := lowlevel_init.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $^
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -39,9 +43,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/nc650/Makefile b/board/nc650/Makefile
index 8dc4934..e4006e7 100644
--- a/board/nc650/Makefile
+++ b/board/nc650/Makefile
@@ -1,6 +1,6 @@
#
# (C) Copyright 2006 Detlev Zundel, dzu@denx.de
-# (C) Copyright 2004
+# (C) Copyright 2004-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -24,18 +24,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o nand.o flash.o
+COBJS = $(BOARD).o nand.o flash.o
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/nc650/config.mk b/board/nc650/config.mk
index 5b2284a..52c8ffe 100644
--- a/board/nc650/config.mk
+++ b/board/nc650/config.mk
@@ -27,4 +27,4 @@
#
TEXT_BASE = 0x40700000
-BOARDLIBS = drivers/nand/libnand.a
+BOARDLIBS = $(obj)drivers/nand/libnand.a
diff --git a/board/netphone/Makefile b/board/netphone/Makefile
index b3c1797..df7d312 100644
--- a/board/netphone/Makefile
+++ b/board/netphone/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2004
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o phone_console.o
+COBJS = $(BOARD).o flash.o phone_console.o
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/netstar/Makefile b/board/netstar/Makefile
index 3a20501..88da2b9 100644
--- a/board/netstar/Makefile
+++ b/board/netstar/Makefile
@@ -1,4 +1,7 @@
#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
# (C) Copyright 2005
# Ladislav Michl, 2N Telekomunikace, michl@2n.cz
#
@@ -23,63 +26,71 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := netstar.o flash.o nand.o
+COBJS := netstar.o flash.o nand.o
SOBJS := setup.o crcek.o
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) eeprom.c \
+ eeprom_start.S
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
gcclibdir := $(shell dirname `$(CC) -print-libgcc-file-name`)
LOAD_ADDR = 0x10400000
LDSCRIPT = $(TOPDIR)/board/$(BOARDDIR)/eeprom.lds
+lnk = $(if $(obj),$(obj),.)
HOST_CFLAGS = -Wall -pedantic -I$(TOPDIR)/include
-all: $(LIB) eeprom.srec eeprom.bin crcek.srec crcek.bin crcit
+all: $(obj).depend $(LIB) $(obj)eeprom.srec $(obj)eeprom.bin \
+ $(obj)crcek.srec $(obj)crcek.bin $(obj)crcit
$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $^
+ $(AR) $(ARFLAGS) $@ $^
-eeprom.srec: eeprom.o eeprom_start.o
- $(LD) -T $(LDSCRIPT) -g -Ttext $(LOAD_ADDR) \
- -o $(<:.o=) -e $(<:.o=) $^ \
- -L../../examples -lstubs \
- -L../../lib_generic -lgeneric \
+$(obj)eeprom.srec: $(obj)eeprom.o $(obj)eeprom_start.o
+ cd $(lnk) && $(LD) -T $(LDSCRIPT) -g -Ttext $(LOAD_ADDR) \
+ -o $(<:.o=) -e eeprom eeprom.o eeprom_start.o \
+ -L$(obj)../../examples -lstubs \
+ -L$(obj)../../lib_generic -lgeneric \
-L$(gcclibdir) -lgcc
$(OBJCOPY) -O srec $(<:.o=) $@
-eeprom.bin: eeprom.srec
+$(obj)eeprom.bin: $(obj)eeprom.srec
$(OBJCOPY) -I srec -O binary $< $@ 2>/dev/null
-crcek.srec: crcek.o
+$(obj)crcek.srec: $(obj)crcek.o
$(LD) -g -Ttext 0x00000000 \
- -o $(<:.o=) -e $(<:.o=) $^
+ -o $(<:.o=) -e crcek $^
$(OBJCOPY) -O srec $(<:.o=) $@
-crcek.bin: crcek.srec
+$(obj)crcek.bin: $(obj)crcek.srec
$(OBJCOPY) -I srec -O binary $< $@ 2>/dev/null
-crcit: crcit.o crc32.o
+$(obj)crcit: $(obj)crcit.o $(obj)crc32.o
$(HOSTCC) $(HOST_CFLAGS) -o $@ $^
-crcit.o: crcit.c
- $(HOSTCC) $(HOST_CFLAGS) -c $<
+$(obj)crcit.o: crcit.c
+ $(HOSTCC) $(HOST_CFLAGS) -o $@ -c $<
-crc32.o: $(TOPDIR)/tools/crc32.c
- $(HOSTCC) $(HOST_CFLAGS) -DUSE_HOSTCC -c $<
+$(obj)crc32.o: $(OBJTREE)/tools/crc32.c
+ $(HOSTCC) $(HOST_CFLAGS) -DUSE_HOSTCC -o $@ -c $<
clean:
- rm -f $(SOBJS) $(OBJS) eeprom eeprom.srec eeprom.bin \
- crcek crcek.srec crcek.bin
+ rm -f $(SOBJS) $(OBJS) $(obj)eeprom $(obj)eeprom.srec \
+ $(obj)eeprom.bin $(obj)crcek $(obj)crcek.srec \
+ $(obj)crcek.bin
distclean: clean
rm -f $(LIB) core *.bak .depend
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/netstar/crcit b/board/netstar/crcit
deleted file mode 100755
index 203645d..0000000
--- a/board/netstar/crcit
+++ /dev/null
Binary files differ
diff --git a/board/netta/Makefile b/board/netta/Makefile
index ee200c2..96374ba 100644
--- a/board/netta/Makefile
+++ b/board/netta/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2004
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o dsp.o codec.o pcmcia.o
+COBJS = $(BOARD).o flash.o dsp.o codec.o pcmcia.o
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/netta2/Makefile b/board/netta2/Makefile
index d457020..cf07cf4 100644
--- a/board/netta2/Makefile
+++ b/board/netta2/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2004
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/netvia/Makefile b/board/netvia/Makefile
index 13ce9fc..cf07cf4 100644
--- a/board/netvia/Makefile
+++ b/board/netvia/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/ns9750dev/Makefile b/board/ns9750dev/Makefile
index fb4333c..b520377 100644
--- a/board/ns9750dev/Makefile
+++ b/board/ns9750dev/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000, 2001, 2002
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,13 +23,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := ns9750dev.o flash.o led.o
+COBJS := ns9750dev.o flash.o led.o
SOBJS := lowlevel_init.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -39,9 +43,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/nx823/Makefile b/board/nx823/Makefile
index 7a2014d..dcb1907 100644
--- a/board/nx823/Makefile
+++ b/board/nx823/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/o2dnt/Makefile b/board/o2dnt/Makefile
index 2eb4366..f356bd3 100644
--- a/board/o2dnt/Makefile
+++ b/board/o2dnt/Makefile
@@ -1,6 +1,6 @@
#
-# (C) Copyright 2005
+# (C) Copyright 2005-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -24,12 +24,16 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := $(BOARD).o flash.o
+COBJS := $(BOARD).o flash.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -39,9 +43,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/omap1510inn/Makefile b/board/omap1510inn/Makefile
index 902b24e..fe4b8d6 100644
--- a/board/omap1510inn/Makefile
+++ b/board/omap1510inn/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000, 2001, 2002
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,13 +23,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := omap1510innovator.o
+COBJS := omap1510innovator.o
SOBJS := lowlevel_init.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $^
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -39,9 +43,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/omap1610inn/Makefile b/board/omap1610inn/Makefile
index 4560102..c375bc1 100644
--- a/board/omap1610inn/Makefile
+++ b/board/omap1610inn/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000, 2001, 2002
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,13 +23,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := omap1610innovator.o flash.o
+COBJS := omap1610innovator.o flash.o
SOBJS := lowlevel_init.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $^
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -39,9 +43,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/omap2420h4/Makefile b/board/omap2420h4/Makefile
index ed47868..2f2645a 100644
--- a/board/omap2420h4/Makefile
+++ b/board/omap2420h4/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000, 2001, 2002
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,13 +23,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := omap2420h4.o mem.o sys_info.o
+COBJS := omap2420h4.o mem.o sys_info.o
SOBJS := lowlevel_init.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $^
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -39,9 +43,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/omap5912osk/Makefile b/board/omap5912osk/Makefile
index 4b56421..8e14c69 100644
--- a/board/omap5912osk/Makefile
+++ b/board/omap5912osk/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2004
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,13 +23,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := omap5912osk.o
+COBJS := omap5912osk.o
SOBJS := lowlevel_init.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $^
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -39,9 +43,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/omap730p2/Makefile b/board/omap730p2/Makefile
index 29467ac..104ff4e 100644
--- a/board/omap730p2/Makefile
+++ b/board/omap730p2/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000, 2001, 2002
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,13 +23,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := omap730p2.o flash.o
+COBJS := omap730p2.o flash.o
SOBJS := lowlevel_init.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $^
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -39,9 +43,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/oxc/Makefile b/board/oxc/Makefile
index ae7a932..cf07cf4 100644
--- a/board/oxc/Makefile
+++ b/board/oxc/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/pb1x00/Makefile b/board/pb1x00/Makefile
index d1cdc6b..f7d5841 100644
--- a/board/pb1x00/Makefile
+++ b/board/pb1x00/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2003
+# (C) Copyright 2003-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,19 +23,23 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
SOBJS = memsetup.o
-$(LIB): .depend $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/pcippc2/Makefile b/board/pcippc2/Makefile
index 2998f23..a6ae906 100644
--- a/board/pcippc2/Makefile
+++ b/board/pcippc2/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2002
+# (C) Copyright 2002-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,23 +23,25 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
COBJS = $(BOARD).o cpc710_pci.o flash.o sconsole.o \
fpga_serial.o pcippc2_fpga.o cpc710_init_ram.o i2c.o
-AOBJS =
+SOBJS =
-OBJS = $(COBJS) $(AOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
#########################################################################
-.depend: Makefile $(AOBJS:.o=.S) $(COBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(AOBJS:.o=.S) $(COBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/pcs440ep/Makefile b/board/pcs440ep/Makefile
index 4a2a388..2a3cfbe 100644
--- a/board/pcs440ep/Makefile
+++ b/board/pcs440ep/Makefile
@@ -23,13 +23,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
SOBJS = init.o
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -39,9 +43,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/pleb2/Makefile b/board/pleb2/Makefile
index 95d9170..fef0eb3 100644
--- a/board/pleb2/Makefile
+++ b/board/pleb2/Makefile
@@ -1,6 +1,6 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -24,13 +24,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := pleb2.o flash.o
+COBJS := pleb2.o flash.o
SOBJS := lowlevel_init.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -40,9 +44,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/pm520/Makefile b/board/pm520/Makefile
index 8cf0d7d..7762ed3 100644
--- a/board/pm520/Makefile
+++ b/board/pm520/Makefile
@@ -1,6 +1,6 @@
#
-# (C) Copyright 2003-2004
+# (C) Copyright 2003-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -24,12 +24,16 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := $(BOARD).o flash.o
+COBJS := $(BOARD).o flash.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -39,9 +43,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/pm826/Makefile b/board/pm826/Makefile
index 7a2014d..dcb1907 100644
--- a/board/pm826/Makefile
+++ b/board/pm826/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/pm826/config.mk b/board/pm826/config.mk
index c93bad9..48ac299 100644
--- a/board/pm826/config.mk
+++ b/board/pm826/config.mk
@@ -26,7 +26,7 @@
#
-sinclude $(TOPDIR)/board/$(BOARDDIR)/config.tmp
+sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
ifndef TEXT_BASE
## Standard: boot 64-bit flash
diff --git a/board/pm828/Makefile b/board/pm828/Makefile
index b9ef0c0..dcb1907 100644
--- a/board/pm828/Makefile
+++ b/board/pm828/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001-2004
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/pm828/config.mk b/board/pm828/config.mk
index e894af7..6288431 100644
--- a/board/pm828/config.mk
+++ b/board/pm828/config.mk
@@ -26,7 +26,7 @@
#
-sinclude $(TOPDIR)/board/$(BOARDDIR)/config.tmp
+sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
ifndef TEXT_BASE
## Standard: boot 64-bit flash
diff --git a/board/pm854/Makefile b/board/pm854/Makefile
index 7828166..2913650 100644
--- a/board/pm854/Makefile
+++ b/board/pm854/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001-2005
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,14 +23,18 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := $(BOARD).o
+COBJS := $(BOARD).o
SOBJS := init.o
#SOBJS :=
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(OBJS) $(SOBJS)
@@ -40,9 +44,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/pm856/Makefile b/board/pm856/Makefile
index 5d8ea34..2913650 100644
--- a/board/pm856/Makefile
+++ b/board/pm856/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,14 +23,18 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := $(BOARD).o
+COBJS := $(BOARD).o
SOBJS := init.o
#SOBJS :=
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(OBJS) $(SOBJS)
@@ -40,9 +44,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/pn62/Makefile b/board/pn62/Makefile
index e85d4fd..eb88898 100644
--- a/board/pn62/Makefile
+++ b/board/pn62/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o cmd_pn62.o misc.o
+COBJS = $(BOARD).o cmd_pn62.o misc.o
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/ppmc7xx/Makefile b/board/ppmc7xx/Makefile
index c378677..5fbefeb 100644
--- a/board/ppmc7xx/Makefile
+++ b/board/ppmc7xx/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,13 +23,18 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := ppmc7xx.o pci.o flash.o
SOBJS := init.o
-$(LIB): .depend $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS) $(SOBJS)
+COBJS := ppmc7xx.o pci.o flash.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -39,9 +44,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/ppmc8260/Makefile b/board/ppmc8260/Makefile
index 351f4ee..7fd545b 100644
--- a/board/ppmc8260/Makefile
+++ b/board/ppmc8260/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,12 +23,16 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := ppmc8260.o
+COBJS := ppmc8260.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -38,9 +42,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/prodrive/p3p440/Makefile b/board/prodrive/p3p440/Makefile
index 47116d3..261e5d4 100644
--- a/board/prodrive/p3p440/Makefile
+++ b/board/prodrive/p3p440/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2002
+# (C) Copyright 2002-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,13 +23,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o
+COBJS = $(BOARD).o
SOBJS = init.o
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -39,9 +43,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/prodrive/pdnb3/Makefile b/board/prodrive/pdnb3/Makefile
index f3cd5a3..096db6f 100644
--- a/board/prodrive/pdnb3/Makefile
+++ b/board/prodrive/pdnb3/Makefile
@@ -23,12 +23,16 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := flash.o pdnb3.o nand.o
+COBJS := flash.o pdnb3.o nand.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $^
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -38,9 +42,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/prodrive/pdnb3/config.mk b/board/prodrive/pdnb3/config.mk
index 6b0f18b..7670758 100644
--- a/board/prodrive/pdnb3/config.mk
+++ b/board/prodrive/pdnb3/config.mk
@@ -1,4 +1,4 @@
TEXT_BASE = 0x01f00000
# include NPE ethernet driver
-BOARDLIBS = cpu/ixp/npe/libnpe.a
+BOARDLIBS = $(obj)cpu/ixp/npe/libnpe.a
diff --git a/board/psyent/pci5441/Makefile b/board/psyent/pci5441/Makefile
index 8e55c9b..3639cba 100644
--- a/board/psyent/pci5441/Makefile
+++ b/board/psyent/pci5441/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001-2004
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -12,7 +12,7 @@
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
@@ -22,17 +22,22 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
COMOBJS := ../common/AMDLV065D.o
-OBJS := $(BOARD).o $(COMOBJS)
+COBJS := $(BOARD).o $(COMOBJS)
-SOBJS =
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $^
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -42,9 +47,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/psyent/pk1c20/Makefile b/board/psyent/pk1c20/Makefile
index 5c1db03..2568a68 100644
--- a/board/psyent/pk1c20/Makefile
+++ b/board/psyent/pk1c20/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001-2004
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -12,7 +12,7 @@
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
@@ -22,17 +22,22 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
COMOBJS := ../common/AMDLV065D.o
-OBJS := $(BOARD).o led.o $(COMOBJS)
+COBJS := $(BOARD).o led.o $(COMOBJS)
-SOBJS =
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $^
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -42,9 +47,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/purple/Makefile b/board/purple/Makefile
index b2f2fc0..29844ba 100644
--- a/board/purple/Makefile
+++ b/board/purple/Makefile
@@ -1,6 +1,6 @@
#
-# (C) Copyright 2003
+# (C) Copyright 2003-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -24,19 +24,23 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o sconsole.o
+COBJS = $(BOARD).o flash.o sconsole.o
SOBJS = lowlevel_init.o
-$(LIB): .depend $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/pxa255_idp/Makefile b/board/pxa255_idp/Makefile
index b5f352a..a957dd3 100644
--- a/board/pxa255_idp/Makefile
+++ b/board/pxa255_idp/Makefile
@@ -1,6 +1,6 @@
#
-# (C) Copyright 2000-2005
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -24,13 +24,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := pxa_idp.o
+COBJS := pxa_idp.o
SOBJS := memsetup.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -40,9 +44,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/quantum/Makefile b/board/quantum/Makefile
index e50f5ff..c7a1d05 100644
--- a/board/quantum/Makefile
+++ b/board/quantum/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,19 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o fpga.o
+COBJS = $(BOARD).o fpga.o
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/r360mpi/Makefile b/board/r360mpi/Makefile
index 1a7e7a6..9f34ad1 100644
--- a/board/r360mpi/Makefile
+++ b/board/r360mpi/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o pcmcia.o
+COBJS = $(BOARD).o flash.o pcmcia.o
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/r5200/Makefile b/board/r5200/Makefile
index d0364ed..424ab1c 100644
--- a/board/r5200/Makefile
+++ b/board/r5200/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2003
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o
+COBJS = $(BOARD).o
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/rattler/Makefile b/board/rattler/Makefile
index 52f0fd6..be7e213 100644
--- a/board/rattler/Makefile
+++ b/board/rattler/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001-2005
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,12 +23,16 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := $(BOARD).o
+COBJS := $(BOARD).o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -38,9 +42,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/rbc823/Makefile b/board/rbc823/Makefile
index 0121ddc..2182bc9 100644
--- a/board/rbc823/Makefile
+++ b/board/rbc823/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o kbd.o
+COBJS = $(BOARD).o flash.o kbd.o
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/rmu/Makefile b/board/rmu/Makefile
index 13ce9fc..cf07cf4 100644
--- a/board/rmu/Makefile
+++ b/board/rmu/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/rpxsuper/Makefile b/board/rpxsuper/Makefile
index 4535106..4b0dc25 100644
--- a/board/rpxsuper/Makefile
+++ b/board/rpxsuper/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,12 +23,16 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := rpxsuper.o flash.o mii_phy.o
+COBJS := rpxsuper.o flash.o mii_phy.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -38,9 +42,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/rsdproto/Makefile b/board/rsdproto/Makefile
index 9934787..5c9c33c 100644
--- a/board/rsdproto/Makefile
+++ b/board/rsdproto/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,25 +23,29 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := rsdproto.o flash.o
+COBJS := rsdproto.o flash.o
SOBJS := flash_asm.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $^
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
distclean: clean
- rm -f $(LIB) core *.bak .depend
+ rm -f $(LIB) core *.bak $(obj).depend
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/sacsng/Makefile b/board/sacsng/Makefile
index baefa4a..9bb9c15 100644
--- a/board/sacsng/Makefile
+++ b/board/sacsng/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,12 +23,16 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := sacsng.o flash.o clkinit.o
+COBJS := sacsng.o flash.o clkinit.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -38,9 +42,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/sandburst/karef/Makefile b/board/sandburst/karef/Makefile
index 8b3173c..3b094ce 100644
--- a/board/sandburst/karef/Makefile
+++ b/board/sandburst/karef/Makefile
@@ -1,4 +1,7 @@
#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
# (C) Copyright 2005
# Sandburst Corporation
# Travis B. Sawyer
@@ -23,6 +26,9 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
# TBS: add for debugging purposes
BUILDUSER := $(shell whoami)
@@ -32,16 +38,19 @@
# TBS: end debugging
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o ../common/flash.o ../common/ppc440gx_i2c.o \
+COBJS = $(BOARD).o ../common/flash.o ../common/ppc440gx_i2c.o \
../common/sb_common.o
SOBJS = init.o
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -51,9 +60,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/sandburst/metrobox/Makefile b/board/sandburst/metrobox/Makefile
index 06a9a22..c143e5e 100644
--- a/board/sandburst/metrobox/Makefile
+++ b/board/sandburst/metrobox/Makefile
@@ -1,4 +1,7 @@
#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
# (C) Copyright 2005
# Travis B. Sawyer, Sandburst Corporation, tsawyer@sandburst.com
#
@@ -22,6 +25,9 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
# TBS: add for debugging purposes
BUILDUSER := $(shell whoami)
@@ -31,15 +37,18 @@
# TBS: end debugging
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o ../common/flash.o ../common/ppc440gx_i2c.o \
+COBJS = $(BOARD).o ../common/flash.o ../common/ppc440gx_i2c.o \
../common/sb_common.o
SOBJS = init.o
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -49,9 +58,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/sandpoint/Makefile b/board/sandpoint/Makefile
index d6bbf2f..cf07cf4 100644
--- a/board/sandpoint/Makefile
+++ b/board/sandpoint/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/sbc2410x/Makefile b/board/sbc2410x/Makefile
index ae8665e..a68c383 100644
--- a/board/sbc2410x/Makefile
+++ b/board/sbc2410x/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000, 2001, 2002
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,13 +23,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := sbc2410x.o flash.o
+COBJS := sbc2410x.o flash.o
SOBJS := lowlevel_init.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -39,9 +43,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/sbc405/Makefile b/board/sbc405/Makefile
index c4198c4..3c5aa86 100644
--- a/board/sbc405/Makefile
+++ b/board/sbc405/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000, 2001
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,12 +23,16 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o strataflash.o
+COBJS = $(BOARD).o strataflash.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -38,9 +42,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/sbc8240/Makefile b/board/sbc8240/Makefile
index 7a2014d..dcb1907 100644
--- a/board/sbc8240/Makefile
+++ b/board/sbc8240/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/sbc8260/Makefile b/board/sbc8260/Makefile
index 14ed457..422dbc7 100644
--- a/board/sbc8260/Makefile
+++ b/board/sbc8260/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,12 +23,16 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := sbc8260.o flash.o
+COBJS := sbc8260.o flash.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -38,9 +42,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/sbc8560/Makefile b/board/sbc8560/Makefile
index da295fb..1596525 100644
--- a/board/sbc8560/Makefile
+++ b/board/sbc8560/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2004
+# (C) Copyright 2004-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# (C) Copyright 2004 Wind River Systems Inc <www.windriver.com>.
@@ -26,14 +26,18 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := $(BOARD).o
+COBJS := $(BOARD).o
SOBJS := init.o
#SOBJS :=
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(OBJS) $(SOBJS)
@@ -43,9 +47,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/sc520_cdp/Makefile b/board/sc520_cdp/Makefile
index ab06ebc..e19be51 100644
--- a/board/sc520_cdp/Makefile
+++ b/board/sc520_cdp/Makefile
@@ -1,4 +1,7 @@
#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
# (C) Copyright 2002
# Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
#
@@ -23,13 +26,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := sc520_cdp.o flash.o
+COBJS := sc520_cdp.o flash.o
SOBJS := sc520_cdp_asm.o sc520_cdp_asm16.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -39,9 +46,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/sc520_spunk/Makefile b/board/sc520_spunk/Makefile
index 242d53c..bfb77e8 100644
--- a/board/sc520_spunk/Makefile
+++ b/board/sc520_spunk/Makefile
@@ -1,4 +1,7 @@
#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
# (C) Copyright 2002
# Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
#
@@ -23,13 +26,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := sc520_spunk.o flash.o
+COBJS := sc520_spunk.o flash.o
SOBJS := sc520_spunk_asm.o sc520_spunk_asm16.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -39,9 +46,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/scb9328/Makefile b/board/scb9328/Makefile
index 5dc3fd4..85b6b04 100644
--- a/board/scb9328/Makefile
+++ b/board/scb9328/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2004
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,13 +23,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := scb9328.o flash.o
+COBJS := scb9328.o flash.o
SOBJS := lowlevel_init.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $^
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -39,9 +43,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/shannon/Makefile b/board/shannon/Makefile
index f66b096..37774a9 100644
--- a/board/shannon/Makefile
+++ b/board/shannon/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,13 +23,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := shannon.o flash.o
+COBJS := shannon.o flash.o
SOBJS := lowlevel_init.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -39,9 +43,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/siemens/CCM/Makefile b/board/siemens/CCM/Makefile
index ee2fc53..e053c7d 100644
--- a/board/siemens/CCM/Makefile
+++ b/board/siemens/CCM/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -22,20 +22,28 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+$(shell mkdir -p $(obj)../../tqm8xx)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = ccm.o flash.o fpga_ccm.o ../common/fpga.o \
+COBJS = ccm.o flash.o fpga_ccm.o ../common/fpga.o \
../../tqm8xx/load_sernum_ethaddr.o
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/siemens/IAD210/Makefile b/board/siemens/IAD210/Makefile
index 87a6893..aa1510e 100644
--- a/board/siemens/IAD210/Makefile
+++ b/board/siemens/IAD210/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000, 2001, 2002
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o atm.o
+COBJS = $(BOARD).o flash.o atm.o
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/siemens/SCM/Makefile b/board/siemens/SCM/Makefile
index af646e4..edc1820 100644
--- a/board/siemens/SCM/Makefile
+++ b/board/siemens/SCM/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -22,21 +22,28 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+$(shell mkdir -p $(obj)../../tqm8xx/)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = scm.o flash.o fpga_scm.o ../common/fpga.o \
+COBJS = scm.o flash.o fpga_scm.o ../common/fpga.o \
../../tqm8xx/load_sernum_ethaddr.o
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/siemens/pcu_e/Makefile b/board/siemens/pcu_e/Makefile
index 7a2014d..dcb1907 100644
--- a/board/siemens/pcu_e/Makefile
+++ b/board/siemens/pcu_e/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/sixnet/Makefile b/board/sixnet/Makefile
index 13ce9fc..cf07cf4 100644
--- a/board/sixnet/Makefile
+++ b/board/sixnet/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/sl8245/Makefile b/board/sl8245/Makefile
index 6d11240..d3db1a9 100644
--- a/board/sl8245/Makefile
+++ b/board/sl8245/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001 - 2003
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/smdk2400/Makefile b/board/smdk2400/Makefile
index fc3d48f..57c76e5 100644
--- a/board/smdk2400/Makefile
+++ b/board/smdk2400/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000, 2001, 2002
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,13 +23,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := smdk2400.o flash.o
+COBJS := smdk2400.o flash.o
SOBJS := lowlevel_init.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -39,9 +43,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/smdk2410/Makefile b/board/smdk2410/Makefile
index 4ee21f5..8617b27 100644
--- a/board/smdk2410/Makefile
+++ b/board/smdk2410/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000, 2001, 2002
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,13 +23,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := smdk2410.o flash.o
+COBJS := smdk2410.o flash.o
SOBJS := lowlevel_init.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -39,9 +43,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/snmc/qs850/Makefile b/board/snmc/qs850/Makefile
index e5d8446..cf07cf4 100644
--- a/board/snmc/qs850/Makefile
+++ b/board/snmc/qs850/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2003
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/snmc/qs860t/Makefile b/board/snmc/qs860t/Makefile
index 13ce9fc..cf07cf4 100644
--- a/board/snmc/qs860t/Makefile
+++ b/board/snmc/qs860t/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/sorcery/Makefile b/board/sorcery/Makefile
index 3d6d673..e02916f 100644
--- a/board/sorcery/Makefile
+++ b/board/sorcery/Makefile
@@ -1,4 +1,5 @@
-# (C) Copyright 2005
+#
+# (C) Copyright 2005-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -22,12 +23,16 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := $(BOARD).o
+COBJS := $(BOARD).o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -37,9 +42,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/sorcery/sorcery.c b/board/sorcery/sorcery.c
index 35d6a06..165e9e2 100644
--- a/board/sorcery/sorcery.c
+++ b/board/sorcery/sorcery.c
@@ -33,7 +33,7 @@
size = dramSetup ();
- return get_ram_size((ulong *)CFG_SDRAM_BASE, size);
+ return get_ram_size(CFG_SDRAM_BASE, size);
}
int checkboard (void)
diff --git a/board/spc1920/Makefile b/board/spc1920/Makefile
index 47afef7..424ab1c 100644
--- a/board/spc1920/Makefile
+++ b/board/spc1920/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o
+COBJS = $(BOARD).o
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/spd8xx/Makefile b/board/spd8xx/Makefile
index 13ce9fc..cf07cf4 100644
--- a/board/spd8xx/Makefile
+++ b/board/spd8xx/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/ssv/adnpesc1/Makefile b/board/ssv/adnpesc1/Makefile
index 9182a4e..5b87b75 100644
--- a/board/ssv/adnpesc1/Makefile
+++ b/board/ssv/adnpesc1/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001-2004
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,14 +23,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := $(BOARD).o flash.o misc.o
+COBJS := $(BOARD).o flash.o misc.o
+SOBJS := vectors.o
-SOBJS = vectors.o
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $^
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -40,9 +43,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/stamp/Makefile b/board/stamp/Makefile
index ab97e1b..ee52007 100644
--- a/board/stamp/Makefile
+++ b/board/stamp/Makefile
@@ -3,7 +3,7 @@
#
# Copyright (c) 2005 blackfin.uclinux.org
#
-# (C) Copyright 2000-2004
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -26,7 +26,7 @@
#
#
-# (C) Copyright 2001
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -50,19 +50,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o stamp.o
-SOBJS =
+COBJS = $(BOARD).o stamp.o
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/stxgp3/Makefile b/board/stxgp3/Makefile
index d150df8..7d52f8c 100644
--- a/board/stxgp3/Makefile
+++ b/board/stxgp3/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,14 +23,18 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := $(BOARD).o flash.o
+COBJS := $(BOARD).o flash.o
SOBJS := init.o
#SOBJS :=
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(OBJS) $(SOBJS)
@@ -40,9 +44,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/stxxtc/Makefile b/board/stxxtc/Makefile
index 8c529a0..424ab1c 100644
--- a/board/stxxtc/Makefile
+++ b/board/stxxtc/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2004
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o
+COBJS = $(BOARD).o
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/svm_sc8xx/Makefile b/board/svm_sc8xx/Makefile
index 13ce9fc..cf07cf4 100644
--- a/board/svm_sc8xx/Makefile
+++ b/board/svm_sc8xx/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/sx1/Makefile b/board/sx1/Makefile
index 8fbdf2a..609ca75 100644
--- a/board/sx1/Makefile
+++ b/board/sx1/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2004
+# (C) Copyright 2004-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,13 +23,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := sx1.o
+COBJS := sx1.o
SOBJS := lowlevel_init.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $^
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -39,9 +43,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/tb0229/Makefile b/board/tb0229/Makefile
index 4375073..1f6f517 100644
--- a/board/tb0229/Makefile
+++ b/board/tb0229/Makefile
@@ -1,7 +1,7 @@
#
# (C) Masami Komiya <mkomiya@sonare.it> 2004
#
-# (C) Copyright 2003-2004
+# (C) Copyright 2003-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -25,19 +25,23 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o vr4131-pci.o
+COBJS = $(BOARD).o flash.o vr4131-pci.o
SOBJS = lowlevel_init.o
-$(LIB): .depend $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/total5200/Makefile b/board/total5200/Makefile
index 232956a..10e5fc3 100644
--- a/board/total5200/Makefile
+++ b/board/total5200/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2003-2004
+# (C) Copyright 2003-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,12 +23,16 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := $(BOARD).o sdram.o
+COBJS := $(BOARD).o sdram.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -38,9 +42,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/total5200/config.mk b/board/total5200/config.mk
index 1a7a7cf..e7ac93d 100644
--- a/board/total5200/config.mk
+++ b/board/total5200/config.mk
@@ -31,7 +31,7 @@
# 0x00100000 boot from RAM (for testing only)
#
-sinclude $(TOPDIR)/board/$(BOARDDIR)/config.tmp
+sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
ifndef TEXT_BASE
## Standard: boot high
diff --git a/board/tqm5200/Makefile b/board/tqm5200/Makefile
index 9a1ea48..a5ce7bd 100644
--- a/board/tqm5200/Makefile
+++ b/board/tqm5200/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2003-2004
+# (C) Copyright 2003-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,12 +23,16 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := $(BOARD).o cmd_stk52xx.o cmd_tb5200.o
+COBJS := $(BOARD).o cmd_stk52xx.o cmd_tb5200.o cam5200_flash.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -36,11 +40,14 @@
distclean: clean
rm -f $(LIB) core *.bak .depend
+cam5200_flash.o: cam5200_flash.c
+ $(CC) $(CFLAGS) -fno-strict-aliasing -c -o $@ $<
+
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/tqm5200/cam5200_flash.c b/board/tqm5200/cam5200_flash.c
new file mode 100644
index 0000000..1a40633
--- /dev/null
+++ b/board/tqm5200/cam5200_flash.c
@@ -0,0 +1,786 @@
+/*
+ * (C) Copyright 2006
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc5xxx.h>
+#include <asm/processor.h>
+
+#ifdef CONFIG_CAM5200
+
+#if 0
+#define DEBUGF(x...) printf(x)
+#else
+#define DEBUGF(x...)
+#endif
+
+#define swap16(x) __swab16(x)
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+
+/*
+ * CAM5200 is a TQM5200B based board. Additionally it also features
+ * a NIOS cpu. The NIOS CPU peripherals are accessible through MPC5xxx
+ * Local Bus on CS5. This includes 32 bit wide RAM and SRAM as well as
+ * 16 bit wide flash device. Big Endian order on a 32 bit CS5 makes
+ * access to flash chip slightly more complicated as additional byte
+ * swapping is necessary within each 16 bit wide flash 'word'.
+ *
+ * This driver's task is to handle both flash devices: 32 bit TQM5200B
+ * flash chip and 16 bit NIOS cpu flash chip. In the below
+ * flash_addr_table table we use least significant address bit to mark
+ * 16 bit flash bank and two sets of routines *_32 and *_16 to handle
+ * specifics of both flashes.
+ */
+static unsigned long flash_addr_table[][CFG_MAX_FLASH_BANKS] = {
+ {CFG_BOOTCS_START, CFG_CS5_START | 1}
+};
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static int write_word(flash_info_t * info, ulong dest, ulong data);
+#ifdef CFG_FLASH_2ND_16BIT_DEV
+static int write_word_32(flash_info_t * info, ulong dest, ulong data);
+static int write_word_16(flash_info_t * info, ulong dest, ulong data);
+static int flash_erase_32(flash_info_t * info, int s_first, int s_last);
+static int flash_erase_16(flash_info_t * info, int s_first, int s_last);
+static ulong flash_get_size_32(vu_long * addr, flash_info_t * info);
+static ulong flash_get_size_16(vu_long * addr, flash_info_t * info);
+#endif
+
+void flash_print_info(flash_info_t * info)
+{
+ int i, k;
+ int size, erased;
+ volatile unsigned long *flash;
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf("missing or unknown FLASH type\n");
+ return;
+ }
+
+ switch (info->flash_id & FLASH_VENDMASK) {
+ case FLASH_MAN_AMD:
+ printf("AMD ");
+ break;
+ case FLASH_MAN_FUJ:
+ printf("FUJITSU ");
+ break;
+ default:
+ printf("Unknown Vendor ");
+ break;
+ }
+
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case FLASH_S29GL128N:
+ printf ("S29GL128N (256 Mbit, uniform sector size)\n");
+ break;
+ case FLASH_AM320B:
+ printf ("29LV320B (32 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM320T:
+ printf ("29LV320T (32 Mbit, top boot sect)\n");
+ break;
+ default:
+ printf("Unknown Chip Type\n");
+ break;
+ }
+
+ printf(" Size: %ld KB in %d Sectors\n",
+ info->size >> 10, info->sector_count);
+
+ printf(" Sector Start Addresses:");
+ for (i = 0; i < info->sector_count; ++i) {
+ /*
+ * Check if whole sector is erased
+ */
+ if (i != (info->sector_count - 1))
+ size = info->start[i + 1] - info->start[i];
+ else
+ size = info->start[0] + info->size - info->start[i];
+
+ erased = 1;
+ flash = (volatile unsigned long *)info->start[i];
+ size = size >> 2; /* divide by 4 for longword access */
+
+ for (k = 0; k < size; k++) {
+ if (*flash++ != 0xffffffff) {
+ erased = 0;
+ break;
+ }
+ }
+
+ if ((i % 5) == 0)
+ printf("\n ");
+
+ printf(" %08lX%s%s", info->start[i],
+ erased ? " E" : " ",
+ info->protect[i] ? "RO " : " ");
+ }
+ printf("\n");
+ return;
+}
+
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+#ifdef CFG_FLASH_2ND_16BIT_DEV
+static ulong flash_get_size(vu_long * addr, flash_info_t * info)
+{
+
+ DEBUGF("get_size: FLASH ADDR %08lx\n", addr);
+
+ /* bit 0 used for big flash marking */
+ if ((ulong)addr & 0x1)
+ return flash_get_size_16((vu_long *)((ulong)addr & 0xfffffffe), info);
+ else
+ return flash_get_size_32(addr, info);
+}
+
+static ulong flash_get_size_32(vu_long * addr, flash_info_t * info)
+#else
+static ulong flash_get_size(vu_long * addr, flash_info_t * info)
+#endif
+{
+ short i;
+ CFG_FLASH_WORD_SIZE value;
+ ulong base = (ulong) addr;
+ volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) addr;
+
+ DEBUGF("get_size32: FLASH ADDR: %08x\n", (unsigned)addr);
+
+ /* Write auto select command: read Manufacturer ID */
+ addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+ addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+ addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00900090;
+ udelay(1000);
+
+ value = addr2[0];
+ DEBUGF("FLASH MANUFACT: %x\n", value);
+
+ switch (value) {
+ case (CFG_FLASH_WORD_SIZE) AMD_MANUFACT:
+ info->flash_id = FLASH_MAN_AMD;
+ break;
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ info->sector_count = 0;
+ info->size = 0;
+ return (0); /* no or unknown flash */
+ }
+
+ value = addr2[1]; /* device ID */
+ DEBUGF("\nFLASH DEVICEID: %x\n", value);
+
+ switch (value) {
+ case AMD_ID_MIRROR:
+ DEBUGF("Mirror Bit flash: addr[14] = %08lX addr[15] = %08lX\n",
+ addr[14], addr[15]);
+ switch(addr[14]) {
+ case AMD_ID_GL128N_2:
+ if (addr[15] != AMD_ID_GL128N_3) {
+ DEBUGF("Chip: S29GL128N -> unknown\n");
+ info->flash_id = FLASH_UNKNOWN;
+ } else {
+ DEBUGF("Chip: S29GL128N\n");
+ info->flash_id += FLASH_S29GL128N;
+ info->sector_count = 128;
+ info->size = 0x02000000;
+ }
+ break;
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ return(0);
+ }
+ break;
+
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ return (0); /* => no or unknown flash */
+ }
+
+ /* set up sector start address table */
+ for (i = 0; i < info->sector_count; i++)
+ info->start[i] = base + (i * 0x00040000);
+
+ /* check for protected sectors */
+ for (i = 0; i < info->sector_count; i++) {
+ /* read sector protection at sector address, (A7 .. A0) = 0x02 */
+ /* D0 = 1 if protected */
+ addr2 = (volatile CFG_FLASH_WORD_SIZE *)(info->start[i]);
+
+ info->protect[i] = addr2[2] & 1;
+ }
+
+ /* issue bank reset to return to read mode */
+ addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0;
+
+ return (info->size);
+}
+
+static int wait_for_DQ7_32(flash_info_t * info, int sect)
+{
+ ulong start, now, last;
+ volatile CFG_FLASH_WORD_SIZE *addr =
+ (CFG_FLASH_WORD_SIZE *) (info->start[sect]);
+
+ start = get_timer(0);
+ last = start;
+ while ((addr[0] & (CFG_FLASH_WORD_SIZE) 0x00800080) !=
+ (CFG_FLASH_WORD_SIZE) 0x00800080) {
+ if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ printf("Timeout\n");
+ return -1;
+ }
+ /* show that we're waiting */
+ if ((now - last) > 1000) { /* every second */
+ putc('.');
+ last = now;
+ }
+ }
+ return 0;
+}
+
+#ifdef CFG_FLASH_2ND_16BIT_DEV
+int flash_erase(flash_info_t * info, int s_first, int s_last)
+{
+ if ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320B) {
+ return flash_erase_16(info, s_first, s_last);
+ } else {
+ return flash_erase_32(info, s_first, s_last);
+ }
+}
+
+static int flash_erase_32(flash_info_t * info, int s_first, int s_last)
+#else
+int flash_erase(flash_info_t * info, int s_first, int s_last)
+#endif
+{
+ volatile CFG_FLASH_WORD_SIZE *addr = (CFG_FLASH_WORD_SIZE *) (info->start[0]);
+ volatile CFG_FLASH_WORD_SIZE *addr2;
+ int flag, prot, sect, l_sect;
+
+ if ((s_first < 0) || (s_first > s_last)) {
+ if (info->flash_id == FLASH_UNKNOWN)
+ printf("- missing\n");
+ else
+ printf("- no sectors to erase\n");
+ return 1;
+ }
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf("Can't erase unknown flash type - aborted\n");
+ return 1;
+ }
+
+ prot = 0;
+ for (sect = s_first; sect <= s_last; ++sect) {
+ if (info->protect[sect])
+ prot++;
+ }
+
+ if (prot)
+ printf("- Warning: %d protected sectors will not be erased!", prot);
+
+ printf("\n");
+
+ l_sect = -1;
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ /* Start erase on unprotected sectors */
+ for (sect = s_first; sect <= s_last; sect++) {
+ if (info->protect[sect] == 0) { /* not protected */
+ addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[sect]);
+
+ addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+ addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+ addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00800080;
+ addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+ addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+ addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00300030; /* sector erase */
+
+ l_sect = sect;
+ /*
+ * Wait for each sector to complete, it's more
+ * reliable. According to AMD Spec, you must
+ * issue all erase commands within a specified
+ * timeout. This has been seen to fail, especially
+ * if printf()s are included (for debug)!!
+ */
+ wait_for_DQ7_32(info, sect);
+ }
+ }
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* wait at least 80us - let's wait 1 ms */
+ udelay(1000);
+
+ /* reset to read mode */
+ addr = (CFG_FLASH_WORD_SIZE *) info->start[0];
+ addr[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0; /* reset bank */
+
+ printf(" done\n");
+ return 0;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
+{
+ ulong cp, wp, data;
+ int i, l, rc;
+
+ wp = (addr & ~3); /* get lower word aligned address */
+
+ /*
+ * handle unaligned start bytes
+ */
+ if ((l = addr - wp) != 0) {
+ data = 0;
+ for (i = 0, cp = wp; i < l; ++i, ++cp)
+ data = (data << 8) | (*(uchar *) cp);
+
+ for (; i < 4 && cnt > 0; ++i) {
+ data = (data << 8) | *src++;
+ --cnt;
+ ++cp;
+ }
+
+ for (; cnt == 0 && i < 4; ++i, ++cp)
+ data = (data << 8) | (*(uchar *) cp);
+
+ if ((rc = write_word(info, wp, data)) != 0)
+ return (rc);
+
+ wp += 4;
+ }
+
+ /*
+ * handle word aligned part
+ */
+ while (cnt >= 4) {
+ data = 0;
+ for (i = 0; i < 4; ++i)
+ data = (data << 8) | *src++;
+
+ if ((rc = write_word(info, wp, data)) != 0)
+ return (rc);
+
+ wp += 4;
+ cnt -= 4;
+ }
+
+ if (cnt == 0)
+ return (0);
+
+ /*
+ * handle unaligned tail bytes
+ */
+ data = 0;
+ for (i = 0, cp = wp; i < 4 && cnt > 0; ++i, ++cp) {
+ data = (data << 8) | *src++;
+ --cnt;
+ }
+ for (; i < 4; ++i, ++cp)
+ data = (data << 8) | (*(uchar *) cp);
+
+ return (write_word(info, wp, data));
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+#ifdef CFG_FLASH_2ND_16BIT_DEV
+static int write_word(flash_info_t * info, ulong dest, ulong data)
+{
+ if ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320B) {
+ return write_word_16(info, dest, data);
+ } else {
+ return write_word_32(info, dest, data);
+ }
+}
+
+static int write_word_32(flash_info_t * info, ulong dest, ulong data)
+#else
+static int write_word(flash_info_t * info, ulong dest, ulong data)
+#endif
+{
+ volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[0]);
+ volatile CFG_FLASH_WORD_SIZE *dest2 = (CFG_FLASH_WORD_SIZE *) dest;
+ volatile CFG_FLASH_WORD_SIZE *data2 = (CFG_FLASH_WORD_SIZE *) & data;
+ ulong start;
+ int i, flag;
+
+ /* Check if Flash is (sufficiently) erased */
+ if ((*((vu_long *)dest) & data) != data)
+ return (2);
+
+ for (i = 0; i < 4 / sizeof(CFG_FLASH_WORD_SIZE); i++) {
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+ addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+ addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00A000A0;
+
+ dest2[i] = data2[i];
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* data polling for D7 */
+ start = get_timer(0);
+ while ((dest2[i] & (CFG_FLASH_WORD_SIZE) 0x00800080) !=
+ (data2[i] & (CFG_FLASH_WORD_SIZE) 0x00800080)) {
+
+ if (get_timer(start) > CFG_FLASH_WRITE_TOUT)
+ return (1);
+ }
+ }
+
+ return (0);
+}
+
+#ifdef CFG_FLASH_2ND_16BIT_DEV
+
+#undef CFG_FLASH_WORD_SIZE
+#define CFG_FLASH_WORD_SIZE unsigned short
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+static ulong flash_get_size_16(vu_long * addr, flash_info_t * info)
+{
+ short i;
+ CFG_FLASH_WORD_SIZE value;
+ ulong base = (ulong) addr;
+ volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) addr;
+
+ DEBUGF("get_size16: FLASH ADDR: %08x\n", (unsigned)addr);
+
+ /* issue bank reset to return to read mode */
+ addr2[0] = (CFG_FLASH_WORD_SIZE) 0xF000F000;
+
+ /* Write auto select command: read Manufacturer ID */
+ addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xAA00AA00;
+ addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x55005500;
+ addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x90009000;
+ udelay(1000);
+
+ value = swap16(addr2[0]);
+ DEBUGF("FLASH MANUFACT: %x\n", value);
+
+ switch (value) {
+ case (CFG_FLASH_WORD_SIZE) AMD_MANUFACT:
+ info->flash_id = FLASH_MAN_AMD;
+ break;
+ case (CFG_FLASH_WORD_SIZE) FUJ_MANUFACT:
+ info->flash_id = FLASH_MAN_FUJ;
+ break;
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ info->sector_count = 0;
+ info->size = 0;
+ return (0); /* no or unknown flash */
+ }
+
+ value = swap16(addr2[1]); /* device ID */
+ DEBUGF("\nFLASH DEVICEID: %x\n", value);
+
+ switch (value) {
+ case (CFG_FLASH_WORD_SIZE)AMD_ID_LV320B:
+ info->flash_id += FLASH_AM320B;
+ info->sector_count = 71;
+ info->size = 0x00400000;
+ break; /* => 4 MB */
+ case (CFG_FLASH_WORD_SIZE)AMD_ID_LV320T:
+ info->flash_id += FLASH_AM320T;
+ info->sector_count = 71;
+ info->size = 0x00400000;
+ break; /* => 4 MB */
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ return (0); /* => no or unknown flash */
+ }
+
+ if (info->flash_id & FLASH_BTYPE) {
+ /* set sector offsets for bottom boot block type */
+ info->start[0] = base + 0x00000000;
+ info->start[1] = base + 0x00002000;
+ info->start[2] = base + 0x00004000;
+ info->start[3] = base + 0x00006000;
+ info->start[4] = base + 0x00008000;
+ info->start[5] = base + 0x0000a000;
+ info->start[6] = base + 0x0000c000;
+ info->start[7] = base + 0x0000e000;
+
+ for (i = 8; i < info->sector_count; i++)
+ info->start[i] = base + (i * 0x00010000) - 0x00070000;
+ } else {
+ /* set sector offsets for top boot block type */
+ i = info->sector_count - 1;
+ info->start[i--] = base + info->size - 0x00002000;
+ info->start[i--] = base + info->size - 0x00004000;
+ info->start[i--] = base + info->size - 0x00006000;
+ info->start[i--] = base + info->size - 0x00008000;
+ info->start[i--] = base + info->size - 0x0000a000;
+ info->start[i--] = base + info->size - 0x0000c000;
+ info->start[i--] = base + info->size - 0x0000e000;
+
+ for (; i >= 0; i--)
+ info->start[i] = base + i * 0x00010000;
+ }
+
+ /* check for protected sectors */
+ for (i = 0; i < info->sector_count; i++) {
+ /* read sector protection at sector address, (A7 .. A0) = 0x02 */
+ /* D0 = 1 if protected */
+ addr2 = (volatile CFG_FLASH_WORD_SIZE *)(info->start[i]);
+
+ info->protect[i] = addr2[2] & 1;
+ }
+
+ /* issue bank reset to return to read mode */
+ addr2[0] = (CFG_FLASH_WORD_SIZE) 0xF000F000;
+
+ return (info->size);
+}
+
+static int wait_for_DQ7_16(flash_info_t * info, int sect)
+{
+ ulong start, now, last;
+ volatile CFG_FLASH_WORD_SIZE *addr =
+ (CFG_FLASH_WORD_SIZE *) (info->start[sect]);
+
+ start = get_timer(0);
+ last = start;
+ while ((addr[0] & (CFG_FLASH_WORD_SIZE) 0x80008000) !=
+ (CFG_FLASH_WORD_SIZE) 0x80008000) {
+ if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ printf("Timeout\n");
+ return -1;
+ }
+ /* show that we're waiting */
+ if ((now - last) > 1000) { /* every second */
+ putc('.');
+ last = now;
+ }
+ }
+ return 0;
+}
+
+static int flash_erase_16(flash_info_t * info, int s_first, int s_last)
+{
+ volatile CFG_FLASH_WORD_SIZE *addr = (CFG_FLASH_WORD_SIZE *) (info->start[0]);
+ volatile CFG_FLASH_WORD_SIZE *addr2;
+ int flag, prot, sect, l_sect;
+
+ if ((s_first < 0) || (s_first > s_last)) {
+ if (info->flash_id == FLASH_UNKNOWN)
+ printf("- missing\n");
+ else
+ printf("- no sectors to erase\n");
+ return 1;
+ }
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf("Can't erase unknown flash type - aborted\n");
+ return 1;
+ }
+
+ prot = 0;
+ for (sect = s_first; sect <= s_last; ++sect) {
+ if (info->protect[sect])
+ prot++;
+ }
+
+ if (prot)
+ printf("- Warning: %d protected sectors will not be erased!", prot);
+
+ printf("\n");
+
+ l_sect = -1;
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ /* Start erase on unprotected sectors */
+ for (sect = s_first; sect <= s_last; sect++) {
+ if (info->protect[sect] == 0) { /* not protected */
+ addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[sect]);
+
+ addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xAA00AA00;
+ addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x55005500;
+ addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x80008000;
+ addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xAA00AA00;
+ addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x55005500;
+ addr2[0] = (CFG_FLASH_WORD_SIZE) 0x30003000; /* sector erase */
+
+ l_sect = sect;
+ /*
+ * Wait for each sector to complete, it's more
+ * reliable. According to AMD Spec, you must
+ * issue all erase commands within a specified
+ * timeout. This has been seen to fail, especially
+ * if printf()s are included (for debug)!!
+ */
+ wait_for_DQ7_16(info, sect);
+ }
+ }
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* wait at least 80us - let's wait 1 ms */
+ udelay(1000);
+
+ /* reset to read mode */
+ addr = (CFG_FLASH_WORD_SIZE *) info->start[0];
+ addr[0] = (CFG_FLASH_WORD_SIZE) 0xF000F000; /* reset bank */
+
+ printf(" done\n");
+ return 0;
+}
+
+static int write_word_16(flash_info_t * info, ulong dest, ulong data)
+{
+ volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[0]);
+ volatile CFG_FLASH_WORD_SIZE *dest2 = (CFG_FLASH_WORD_SIZE *) dest;
+ volatile CFG_FLASH_WORD_SIZE *data2 = (CFG_FLASH_WORD_SIZE *) & data;
+ ulong start;
+ int i;
+
+ /* Check if Flash is (sufficiently) erased */
+ for (i = 0; i < 4 / sizeof(CFG_FLASH_WORD_SIZE); i++) {
+ if ((dest2[i] & swap16(data2[i])) != swap16(data2[i]))
+ return (2);
+ }
+
+ for (i = 0; i < 4 / sizeof(CFG_FLASH_WORD_SIZE); i++) {
+ int flag;
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xAA00AA00;
+ addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x55005500;
+ addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xA000A000;
+
+ dest2[i] = swap16(data2[i]);
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* data polling for D7 */
+ start = get_timer(0);
+ while ((dest2[i] & (CFG_FLASH_WORD_SIZE) 0x80008000) !=
+ (swap16(data2[i]) & (CFG_FLASH_WORD_SIZE) 0x80008000)) {
+
+ if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ return (1);
+ }
+ }
+ }
+
+ return (0);
+}
+#endif /* CFG_FLASH_2ND_16BIT_DEV */
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size(vu_long * addr, flash_info_t * info);
+static int write_word(flash_info_t * info, ulong dest, ulong data);
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init(void)
+{
+ unsigned long total_b = 0;
+ unsigned long size_b[CFG_MAX_FLASH_BANKS];
+ unsigned short index = 0;
+ int i;
+
+ DEBUGF("\n");
+ DEBUGF("FLASH: Index: %d\n", index);
+
+ /* Init: no FLASHes known */
+ for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+ flash_info[i].flash_id = FLASH_UNKNOWN;
+ flash_info[i].sector_count = -1;
+ flash_info[i].size = 0;
+
+ /* check whether the address is 0 */
+ if (flash_addr_table[index][i] == 0)
+ continue;
+
+ /* call flash_get_size() to initialize sector address */
+ size_b[i] = flash_get_size((vu_long *) flash_addr_table[index][i],
+ &flash_info[i]);
+
+ flash_info[i].size = size_b[i];
+
+ if (flash_info[i].flash_id == FLASH_UNKNOWN) {
+ printf("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n",
+ i, size_b[i], size_b[i] << 20);
+ flash_info[i].sector_count = -1;
+ flash_info[i].size = 0;
+ }
+
+ /* Monitor protection ON by default */
+ (void)flash_protect(FLAG_PROTECT_SET, CFG_MONITOR_BASE,
+ CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1,
+ &flash_info[i]);
+#if defined(CFG_ENV_IS_IN_FLASH)
+ (void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR,
+ CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1,
+ &flash_info[i]);
+#if defined(CFG_ENV_ADDR_REDUND)
+ (void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR_REDUND,
+ CFG_ENV_ADDR_REDUND + CFG_ENV_SECT_SIZE - 1,
+ &flash_info[i]);
+#endif
+#endif
+ total_b += flash_info[i].size;
+ }
+
+ return total_b;
+}
+#endif /* ifdef CONFIG_CAM5200 */
diff --git a/board/tqm5200/config.mk b/board/tqm5200/config.mk
index 84ddee8..d72dfe7 100644
--- a/board/tqm5200/config.mk
+++ b/board/tqm5200/config.mk
@@ -32,7 +32,7 @@
# 0x00100000 boot from RAM (for testing only)
#
-sinclude $(TOPDIR)/board/$(BOARDDIR)/config.tmp
+sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
ifndef TEXT_BASE
## Standard: boot low
diff --git a/board/tqm5200/tqm5200.c b/board/tqm5200/tqm5200.c
index c8350ab..1d81dce 100644
--- a/board/tqm5200/tqm5200.c
+++ b/board/tqm5200/tqm5200.c
@@ -396,6 +396,7 @@
*/
int post_hotkeys_pressed(void)
{
+#ifdef CONFIG_STK52XX
struct mpc5xxx_gpio *gpio;
gpio = (struct mpc5xxx_gpio*) MPC5XXX_GPIO;
@@ -414,6 +415,9 @@
gpio->simple_ddr &= ~(0x20000000);
return ((gpio->simple_ival & 0x20000000) ? 0 : 1);
+#else
+ return 0;
+#endif
}
#endif
@@ -446,6 +450,43 @@
#endif
#endif /* CONFIG_PS2MULT */
+#ifdef CONFIG_FO300
+int silent_boot (void)
+{
+ vu_long timer3_status;
+
+ /* Configure GPT3 as GPIO input */
+ *(vu_long *)MPC5XXX_GPT3_ENABLE = 0x00000004;
+
+ /* Read in TIMER_3 pin status */
+ timer3_status = *(vu_long *)MPC5XXX_GPT3_STATUS;
+
+#ifdef FO300_SILENT_CONSOLE_WHEN_S1_CLOSED
+ /* Force silent console mode if S1 switch
+ * is in closed position (TIMER_3 pin status is LOW). */
+ if (MPC5XXX_GPT_GPIO_PIN(timer3_status) == 0)
+ return 1;
+#else
+ /* Force silent console mode if S1 switch
+ * is in open position (TIMER_3 pin status is HIGH). */
+ if (MPC5XXX_GPT_GPIO_PIN(timer3_status) == 1)
+ return 1;
+#endif
+
+ return 0;
+}
+
+int board_early_init_f (void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ if (silent_boot())
+ gd->flags |= GD_FLG_SILENT;
+
+ return 0;
+}
+#endif /* CONFIG_FO300 */
+
int last_stage_init (void)
{
/*
@@ -538,6 +579,13 @@
__asm__ volatile ("sync");
}
+#ifdef CONFIG_FO300
+ if (silent_boot()) {
+ setenv("bootdelay", "0");
+ disable_ctrlc(1);
+ }
+#endif
+
return 0;
}
@@ -729,33 +777,3 @@
}
#endif /* CONFIG_VIDEO_SM501 */
-
-
-#ifdef CONFIG_BOARD_EARLY_INIT_F
-#ifdef CONFIG_FO300
-int board_early_init_f (void)
-{
- vu_long timer3_status;
- DECLARE_GLOBAL_DATA_PTR;
-
- /* Configure GPT3 as GPIO input */
- *(vu_long *)MPC5XXX_GPT3_ENABLE = 0x00000004;
-
- /* Read in TIMER_3 pin status */
- timer3_status = *(vu_long *)MPC5XXX_GPT3_STATUS;
-
-#ifdef FO300_SILENT_CONSOLE_WHEN_S1_CLOSED
- /* Force silent console mode if S1 switch
- * is in closed position (TIMER_3 pin status is LOW). */
- if (MPC5XXX_GPT_GPIO_PIN(timer3_status) == 0)
-#else
- /* Force silent console mode if S1 switch
- * is in open position (TIMER_3 pin status is HIGH). */
- if (MPC5XXX_GPT_GPIO_PIN(timer3_status) == 1)
-#endif
- gd->flags |= GD_FLG_SILENT;
-
- return 0;
-}
-#endif
-#endif
diff --git a/board/tqm8260/Makefile b/board/tqm8260/Makefile
index c10b9fe..61221fd 100644
--- a/board/tqm8260/Makefile
+++ b/board/tqm8260/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -22,19 +22,26 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../tqm8xx/)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o ../tqm8xx/load_sernum_ethaddr.o
+COBJS = $(BOARD).o flash.o ../tqm8xx/load_sernum_ethaddr.o
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/tqm834x/Makefile b/board/tqm834x/Makefile
index 3ecc7d0..4c0d204 100644
--- a/board/tqm834x/Makefile
+++ b/board/tqm834x/Makefile
@@ -1,4 +1,7 @@
#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
# Copyright 2004 Freescale Semiconductor, Inc.
#
# See file CREDITS for list of people who contributed to this
@@ -22,12 +25,16 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o pci.o
+COBJS = $(BOARD).o pci.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -37,9 +44,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/tqm85xx/Makefile b/board/tqm85xx/Makefile
index 3933d46..cad7e1e 100644
--- a/board/tqm85xx/Makefile
+++ b/board/tqm85xx/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -12,7 +12,7 @@
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
@@ -23,14 +23,18 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := $(BOARD).o sdram.o
+COBJS := $(BOARD).o sdram.o
SOBJS := init.o
#SOBJS :=
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(OBJS) $(SOBJS)
@@ -40,9 +44,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/tqm8xx/Makefile b/board/tqm8xx/Makefile
index 2ff9b4d..b48934b 100644
--- a/board/tqm8xx/Makefile
+++ b/board/tqm8xx/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2003
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o load_sernum_ethaddr.o
+COBJS = $(BOARD).o flash.o load_sernum_ethaddr.o
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/trab/Makefile b/board/trab/Makefile
index 159404b..868ca42 100644
--- a/board/trab/Makefile
+++ b/board/trab/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2002
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,43 +23,51 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := trab.o flash.o vfd.o cmd_trab.o memory.o tsc2000.o auto_update.o
+COBJS := trab.o flash.o vfd.o cmd_trab.o memory.o tsc2000.o auto_update.o
SOBJS := lowlevel_init.o
+COBJS_FKT := trab_fkt.o rs485.o tsc2000.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) $(COBJS_FKT:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+OBJS_FKT := $(addprefix $(obj),$(COBJS_FKT))
+
gcclibdir := $(shell dirname `$(CC) -print-libgcc-file-name`)
LOAD_ADDR = 0xc100000
#########################################################################
-all: $(LIB) trab_fkt.srec trab_fkt.bin
+all: $(LIB) $(obj)trab_fkt.srec $(obj)trab_fkt.bin
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS) $(SOBJS)
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-trab_fkt.srec: trab_fkt.o rs485.o tsc2000.o $(LIB)
- $(LD) -g -Ttext $(LOAD_ADDR) -o $(<:.o=) -e $(<:.o=) $^ $(LIB) \
- -L../../examples -lstubs \
- -L../../lib_generic -lgeneric \
+$(obj)trab_fkt.srec: $(OBJS_FKT) $(LIB)
+ $(LD) -g -Ttext $(LOAD_ADDR) -o $(<:.o=) -e trab_fkt $^ $(LIB) \
+ -L$(obj)../../examples -lstubs \
+ -L$(obj)../../lib_generic -lgeneric \
-L$(gcclibdir) -lgcc
$(OBJCOPY) -O srec $(<:.o=) $@
-trab_fkt.bin: trab_fkt.srec
+$(obj)trab_fkt.bin: $(obj)trab_fkt.srec
$(OBJCOPY) -I srec -O binary $< $@
clean:
- rm -f $(SOBJS) $(OBJS)
+ rm -f $(SOBJS) $(OBJS) $(OBJS_FKT)
distclean: clean
rm -f $(LIB) core *.bak .depend
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/trab/config.mk b/board/trab/config.mk
index f2411d0..800cc28 100644
--- a/board/trab/config.mk
+++ b/board/trab/config.mk
@@ -19,7 +19,7 @@
# download areas is 0C80'0000
#
-sinclude $(TOPDIR)/board/$(BOARDDIR)/config.tmp
+sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
ifndef TEXT_BASE
TEXT_BASE = 0x0DF40000
diff --git a/board/uc100/Makefile b/board/uc100/Makefile
index 2d2cc23..92ee091 100644
--- a/board/uc100/Makefile
+++ b/board/uc100/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2003
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,19 +23,23 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-#OBJS = $(BOARD).o flash.o pcmcia.o
-OBJS = $(BOARD).o pcmcia.o
+#COBJS = $(BOARD).o flash.o pcmcia.o
+COBJS = $(BOARD).o pcmcia.o
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/utx8245/Makefile b/board/utx8245/Makefile
index e698afc..7ad768b 100644
--- a/board/utx8245/Makefile
+++ b/board/utx8245/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# (C) Copyright 2002
@@ -28,20 +28,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-SOBJS =
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
-$(LIB): .depend $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/v37/Makefile b/board/v37/Makefile
index 7a17067..109cec2 100644
--- a/board/v37/Makefile
+++ b/board/v37/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2003
+# (C) Copyright 2003-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/versatile/Makefile b/board/versatile/Makefile
index fbdc627..1fad0a7 100644
--- a/board/versatile/Makefile
+++ b/board/versatile/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2004
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,13 +23,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := versatile.o flash.o
+COBJS := versatile.o flash.o
SOBJS := lowlevel_init.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $^
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -39,9 +43,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/versatile/split_by_variant.sh b/board/versatile/split_by_variant.sh
index 576f238..25461c2 100755
--- a/board/versatile/split_by_variant.sh
+++ b/board/versatile/split_by_variant.sh
@@ -5,28 +5,30 @@
# ---------------------------------------------------------
# Set up the Versatile type define
# ---------------------------------------------------------
+
+mkdir -p ${obj}include
variant=PB926EJ-S
if [ "$1" == "" ]
then
echo "$0:: No parameters - using versatilepb_config"
- echo "#define CONFIG_ARCH_VERSATILE_PB" > ./include/config.h
+ echo "#define CONFIG_ARCH_VERSATILE_PB" > ${obj}include/config.h
variant=PB926EJ-S
else
case "$1" in
versatilepb_config | \
versatile_config)
- echo "#define CONFIG_ARCH_VERSATILE_PB" > ./include/config.h
+ echo "#define CONFIG_ARCH_VERSATILE_PB" > ${obj}include/config.h
;;
versatileab_config)
- echo "#define CONFIG_ARCH_VERSATILE_AB" > ./include/config.h
+ echo "#define CONFIG_ARCH_VERSATILE_AB" > ${obj}include/config.h
variant=AB926EJ-S
;;
*)
echo "$0:: Unrecognised config - using versatilepb_config"
- echo "#define CONFIG_ARCH_VERSATILE_PB" > ./include/config.h
+ echo "#define CONFIG_ARCH_VERSATILE_PB" > ${obj}include/config.h
variant=PB926EJ-S
;;
@@ -36,5 +38,5 @@
# ---------------------------------------------------------
# Complete the configuration
# ---------------------------------------------------------
-./mkconfig -a versatile arm arm926ejs versatile NULL versatile
+$MKCONFIG -a versatile arm arm926ejs versatile NULL versatile
echo "Variant:: $variant"
diff --git a/board/voiceblue/Makefile b/board/voiceblue/Makefile
index 6302fa8..5f340b4 100644
--- a/board/voiceblue/Makefile
+++ b/board/voiceblue/Makefile
@@ -1,4 +1,4 @@
-# (C) Copyright 2000-2002
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de
#
# (C) Copyright 2005
@@ -24,43 +24,51 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := voiceblue.o
+COBJS := voiceblue.o
SOBJS := setup.o
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) eeprom.c eeprom_start.S
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
gcclibdir := $(shell dirname `$(CC) -print-libgcc-file-name`)
LOAD_ADDR = 0x10400000
LDSCRIPT = $(TOPDIR)/board/$(BOARDDIR)/eeprom.lds
+lnk = $(if $(obj),$(obj),.)
-all: $(LIB) eeprom.srec eeprom.bin
+all: $(obj).depend $(LIB) $(obj)eeprom.srec $(obj)eeprom.bin
$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-eeprom.srec: eeprom.o eeprom_start.o
- $(LD) -T $(LDSCRIPT) -g -Ttext $(LOAD_ADDR) \
- -o $(<:.o=) -e $(<:.o=) $^ \
- -L../../examples -lstubs \
- -L../../lib_generic -lgeneric \
+$(obj)eeprom.srec: $(obj)eeprom.o $(obj)eeprom_start.o
+ cd $(lnk) && $(LD) -T $(LDSCRIPT) -g -Ttext $(LOAD_ADDR) \
+ -o $(<:.o=) -e eeprom eeprom.o eeprom_start.o \
+ -L$(obj)../../examples -lstubs \
+ -L$(obj)../../lib_generic -lgeneric \
-L$(gcclibdir) -lgcc
$(OBJCOPY) -O srec $(<:.o=) $@
-eeprom.bin: eeprom.srec
+$(obj)eeprom.bin: $(obj)eeprom.srec
$(OBJCOPY) -I srec -O binary $< $@ 2>/dev/null
clean:
- rm -f $(SOBJS) $(OBJS) eeprom eeprom.srec eeprom.bin
+ rm -f $(SOBJS) $(OBJS) $(obj)eeprom \
+ $(obj)eeprom.srec $(obj)eeprom.bin \
+ $(obj)eeprom.o $(obj)eeprom_start.o
+
distclean: clean
rm -f $(LIB) core config.tmp *.bak .depend
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/voiceblue/config.mk b/board/voiceblue/config.mk
index b77c91c..d55daa4 100644
--- a/board/voiceblue/config.mk
+++ b/board/voiceblue/config.mk
@@ -3,7 +3,7 @@
# entry 1000'8000 (mem base + reserved)
#
-sinclude $(TOPDIR)/board/$(BOARDDIR)/config.tmp
+sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
ifeq ($(VOICEBLUE_SMALL_FLASH),y)
# We load ourself to internal SRAM at 2001'2000
diff --git a/board/w7o/Makefile b/board/w7o/Makefile
index d008f89..46b8c89 100644
--- a/board/w7o/Makefile
+++ b/board/w7o/Makefile
@@ -1,4 +1,7 @@
#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
# (C) Copyright 2001
# Erik Theisen, Wave 7 Optics, etheisen@mindspring.com.
#
@@ -23,14 +26,18 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o fpga.o fsboot.o post2.o vpd.o cmd_vpd.o \
+COBJS = $(BOARD).o flash.o fpga.o fsboot.o post2.o vpd.o cmd_vpd.o \
watchdog.o
SOBJS = init.o post1.o
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $^
+ $(AR) $(ARFLAGS) $@ $^
clean:
rm -f $(SOBJS) $(OBJS)
@@ -40,9 +47,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/wepep250/Makefile b/board/wepep250/Makefile
index 11ad8fb..58a70cc 100644
--- a/board/wepep250/Makefile
+++ b/board/wepep250/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000, 2002
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,13 +23,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := wepep250.o flash.o
+COBJS := wepep250.o flash.o
SOBJS := lowlevel_init.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -39,9 +43,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/westel/amx860/Makefile b/board/westel/amx860/Makefile
index 7a2014d..dcb1907 100644
--- a/board/westel/amx860/Makefile
+++ b/board/westel/amx860/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/xaeniax/Makefile b/board/xaeniax/Makefile
index 7c5f0cd..9a79f7d 100644
--- a/board/xaeniax/Makefile
+++ b/board/xaeniax/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000, 2002
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,13 +23,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := xaeniax.o flash.o
+COBJS := xaeniax.o flash.o
SOBJS := lowlevel_init.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -39,9 +43,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/xilinx/ml300/Makefile b/board/xilinx/ml300/Makefile
index 880c494..02c22fb 100644
--- a/board/xilinx/ml300/Makefile
+++ b/board/xilinx/ml300/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -19,14 +19,22 @@
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
+#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+$(shell mkdir -p $(obj)../xilinx_enet)
+$(shell mkdir -p $(obj)../xilinx_iic)
+endif
-CFLAGS += -I../ml300 -I../common -I../xilinx_enet -I../xilinx_iic
+INCS := -I../ml300 -I../common -I../xilinx_enet -I../xilinx_iic
+CFLAGS += $(INCS)
+HOST_CFLAGS += $(INCS)
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o \
+COBJS = $(BOARD).o \
serial.o \
../xilinx_enet/emac_adapter.o ../xilinx_enet/xemac.o \
../xilinx_enet/xemac_options.o ../xilinx_enet/xemac_polled.o \
@@ -39,8 +47,12 @@
SOBJS = init.o
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $^
+ $(AR) $(ARFLAGS) $@ $^
clean:
rm -f $(SOBJS) $(OBJS)
@@ -50,9 +62,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/xm250/Makefile b/board/xm250/Makefile
index 1b0a3f0..0a6eb32 100644
--- a/board/xm250/Makefile
+++ b/board/xm250/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2004
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,13 +23,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := xm250.o flash.o
+COBJS := xm250.o flash.o
SOBJS := lowlevel_init.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $^
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -39,9 +43,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/xpedite1k/Makefile b/board/xpedite1k/Makefile
index c5c0915..5da96e9 100644
--- a/board/xpedite1k/Makefile
+++ b/board/xpedite1k/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2002-2004
+# (C) Copyright 2002-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,14 +23,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o
-OBJS +=flash.o
+COBJS = $(BOARD).o flash.o
SOBJS = init.o
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -40,9 +43,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/xsengine/Makefile b/board/xsengine/Makefile
index ed1464a..3f80a1d 100644
--- a/board/xsengine/Makefile
+++ b/board/xsengine/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2004
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,13 +23,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := xsengine.o flash.o
+COBJS := xsengine.o flash.o
SOBJS := lowlevel_init.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -39,9 +43,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/zpc1900/Makefile b/board/zpc1900/Makefile
index 8b10993..be7e213 100644
--- a/board/zpc1900/Makefile
+++ b/board/zpc1900/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,12 +23,16 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := $(BOARD).o
+COBJS := $(BOARD).o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -38,9 +42,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/zylonite/Makefile b/board/zylonite/Makefile
index f3ad674..d72dc98 100644
--- a/board/zylonite/Makefile
+++ b/board/zylonite/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -20,15 +20,20 @@
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#
+
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := zylonite.o nand.o
+COBJS := zylonite.o nand.o
SOBJS := lowlevel_init.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -38,9 +43,9 @@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/zylonite/config.mk b/board/zylonite/config.mk
index b5d5955..09b0f71 100644
--- a/board/zylonite/config.mk
+++ b/board/zylonite/config.mk
@@ -2,5 +2,3 @@
#TEXT_BASE = 0xa1700000
#TEXT_BASE = 0xa3080000
TEXT_BASE = 0xa3008000
-
-BOARDLIBS = drivers/nand/libnand.a
diff --git a/common/Makefile b/common/Makefile
index eb0b5da..56092b9 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2004
+# (C) Copyright 2004-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,7 +23,7 @@
include $(TOPDIR)/config.mk
-LIB = libcommon.a
+LIB = $(obj)libcommon.a
AOBJS =
@@ -53,28 +53,29 @@
usb.o usb_kbd.o usb_storage.o \
virtex2.o xilinx.o crc16.o xyzModem.o
-OBJS = $(AOBJS) $(COBJS)
+SRCS := $(AOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(AOBJS) $(COBJS))
CPPFLAGS += -I..
all: $(LIB) $(AOBJS)
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
-environment.o: environment.c ../tools/envcrc
+$(obj)environment.o: $(src)environment.c $(obj)../tools/envcrc
$(CC) $(AFLAGS) -Wa,--no-warn \
- -DENV_CRC=$(shell ../tools/envcrc) \
- -c -o $@ environment.c
+ -DENV_CRC=$(shell $(obj)../tools/envcrc) \
+ -c -o $@ $(src)environment.c
-../tools/envcrc:
+$(obj)../tools/envcrc:
$(MAKE) -C ../tools
#########################################################################
-.depend: Makefile $(AOBJS:.o=.S) $(COBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(AOBJS:.o=.S) $(COBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/common/cmd_bdinfo.c b/common/cmd_bdinfo.c
index 256e4bc..70de795 100644
--- a/common/cmd_bdinfo.c
+++ b/common/cmd_bdinfo.c
@@ -62,11 +62,13 @@
#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
defined(CONFIG_405EP) || defined(CONFIG_XILINX_ML300) || \
defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
- defined(CONFIG_440SP)
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_440SP) || defined(CONFIG_440SPE)
print_str ("procfreq", strmhz(buf, bd->bi_procfreq));
print_str ("plb_busfreq", strmhz(buf, bd->bi_plb_busfreq));
#if defined(CONFIG_405GP) || defined(CONFIG_405EP) || defined(CONFIG_XILINX_ML300) || \
- defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_440SPE)
+ defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
print_str ("pci_busfreq", strmhz(buf, bd->bi_pci_busfreq));
#endif
#else /* ! CONFIG_405GP, CONFIG_405CR, CONFIG_405EP, CONFIG_XILINX_ML300, CONFIG_440EP CONFIG_440GR */
diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c
index 27bb494..bc84ae3 100644
--- a/common/cmd_bootm.c
+++ b/common/cmd_bootm.c
@@ -260,6 +260,8 @@
if (hdr->ih_arch != IH_CPU_NIOS2)
#elif defined(__blackfin__)
if (hdr->ih_arch != IH_CPU_BLACKFIN)
+#elif defined(__avr32__)
+ if (hdr->ih_arch != IH_CPU_AVR32)
#else
# error Unknown CPU type
#endif
@@ -1310,6 +1312,7 @@
case IH_CPU_INVALID: arch = "Invalid CPU"; break;
case IH_CPU_ALPHA: arch = "Alpha"; break;
case IH_CPU_ARM: arch = "ARM"; break;
+ case IH_CPU_AVR32: arch = "AVR32"; break;
case IH_CPU_I386: arch = "Intel x86"; break;
case IH_CPU_IA64: arch = "IA64"; break;
case IH_CPU_MIPS: arch = "MIPS"; break;
diff --git a/common/cmd_jffs2.c b/common/cmd_jffs2.c
index 201c3c1..b5fd417 100644
--- a/common/cmd_jffs2.c
+++ b/common/cmd_jffs2.c
@@ -1268,7 +1268,7 @@
part_num = 0;
list_for_each(pentry, &dev->parts) {
part = list_entry(pentry, struct part_info, link);
- printf(" %d: %-22s\t0x%08x\t0x%08x\t%d\n",
+ printf("%2d: %-20s0x%08x\t0x%08x\t%d\n",
part_num, part->name, part->size,
part->offset, part->mask_flags);
diff --git a/common/cmd_nand.c b/common/cmd_nand.c
index 21adb1b..274ef0b 100644
--- a/common/cmd_nand.c
+++ b/common/cmd_nand.c
@@ -135,11 +135,16 @@
ulong addr, off, size;
char *cmd, *s;
nand_info_t *nand;
+ int quiet = 0;
+ const char *quiet_str = getenv("quiet");
/* at least two arguments please */
if (argc < 2)
goto usage;
+ if (quiet_str)
+ quiet = simple_strtoul(quiet_str, NULL, 0) != 0;
+
cmd = argv[1];
if (strcmp(cmd, "info") == 0) {
@@ -178,7 +183,10 @@
if (strcmp(cmd, "bad") != 0 && strcmp(cmd, "erase") != 0 &&
strncmp(cmd, "dump", 4) != 0 &&
- strncmp(cmd, "read", 4) != 0 && strncmp(cmd, "write", 5) != 0)
+ strncmp(cmd, "read", 4) != 0 && strncmp(cmd, "write", 5) != 0 &&
+ strcmp(cmd, "scrub") != 0 && strcmp(cmd, "markbad") != 0 &&
+ strcmp(cmd, "biterr") != 0 &&
+ strcmp(cmd, "lock") != 0 && strcmp(cmd, "unlock") != 0 )
goto usage;
/* the following commands operate on the current device */
@@ -197,14 +205,64 @@
return 0;
}
- if (strcmp(cmd, "erase") == 0) {
- arg_off_size(argc - 2, argv + 2, &off, &size, nand->size);
- if (off == 0 && size == 0)
- return 1;
+ if (strcmp(cmd, "erase") == 0 || strcmp(cmd, "scrub") == 0) {
+ nand_erase_options_t opts;
+ int clean = argc >= 3 && !strcmp("clean", argv[2]);
+ int rest_argc = argc - 2;
+ char **rest_argv = argv + 2;
+ int scrub = !strcmp(cmd, "scrub");
+
+ if (clean) {
+ rest_argc--;
+ rest_argv++;
+ }
+
+ if (rest_argc == 0) {
+
+ printf("\nNAND %s: device %d whole chip\n",
+ cmd,
+ nand_curr_device);
- printf("\nNAND erase: device %d offset 0x%x, size 0x%x ",
- nand_curr_device, off, size);
- ret = nand_erase(nand, off, size);
+ off = size = 0;
+ } else {
+ arg_off_size(rest_argc, rest_argv, &off, &size,
+ nand->size);
+
+ if (off == 0 && size == 0)
+ return 1;
+
+ printf("\nNAND %s: device %d offset 0x%x, size 0x%x\n",
+ cmd, nand_curr_device, off, size);
+ }
+
+ memset(&opts, 0, sizeof(opts));
+ opts.offset = off;
+ opts.length = size;
+ opts.jffs2 = clean;
+ opts.quiet = quiet;
+
+ if (scrub) {
+ printf("Warning: "
+ "scrub option will erase all factory set "
+ "bad blocks!\n"
+ " "
+ "There is no reliable way to recover them.\n"
+ " "
+ "Use this command only for testing purposes "
+ "if you\n"
+ " "
+ "are shure of what you are doing!\n"
+ "\nReally scrub this NAND flash? <y/N>\n"
+ );
+
+ if (getc() == 'y' && getc() == '\r') {
+ opts.scrub = 1;
+ } else {
+ printf("scrub aborted\n");
+ return -1;
+ }
+ }
+ ret = nand_erase_opts(nand, &opts);
printf("%s\n", ret ? "ERROR" : "OK");
return ret == 0 ? 0 : 1;
@@ -228,37 +286,153 @@
/* read write */
if (strncmp(cmd, "read", 4) == 0 || strncmp(cmd, "write", 5) == 0) {
+ int read;
+
if (argc < 4)
goto usage;
-/*
- s = strchr(cmd, '.');
- clean = CLEAN_NONE;
- if (s != NULL) {
- if (strcmp(s, ".jffs2") == 0 || strcmp(s, ".e") == 0
- || strcmp(s, ".i"))
- clean = CLEAN_JFFS2;
- }
-*/
+
addr = (ulong)simple_strtoul(argv[2], NULL, 16);
arg_off_size(argc - 3, argv + 3, &off, &size, nand->size);
if (off == 0 && size == 0)
return 1;
- i = strncmp(cmd, "read", 4) == 0; /* 1 = read, 0 = write */
+ read = strncmp(cmd, "read", 4) == 0; /* 1 = read, 0 = write */
printf("\nNAND %s: device %d offset %u, size %u ... ",
- i ? "read" : "write", nand_curr_device, off, size);
+ read ? "read" : "write", nand_curr_device, off, size);
+
+ s = strchr(cmd, '.');
+ if (s != NULL &&
+ (!strcmp(s, ".jffs2") || !strcmp(s, ".e") || !strcmp(s, ".i"))) {
+ if (read) {
+ /* read */
+ nand_read_options_t opts;
+ memset(&opts, 0, sizeof(opts));
+ opts.buffer = (u_char*) addr;
+ opts.length = size;
+ opts.offset = off;
+ opts.quiet = quiet;
+ ret = nand_read_opts(nand, &opts);
+ } else {
+ /* write */
+ nand_write_options_t opts;
+ memset(&opts, 0, sizeof(opts));
+ opts.buffer = (u_char*) addr;
+ opts.length = size;
+ opts.offset = off;
+ /* opts.forcejffs2 = 1; */
+ opts.pad = 1;
+ opts.blockalign = 1;
+ opts.quiet = quiet;
+ ret = nand_write_opts(nand, &opts);
+ }
+ printf("%s\n", ret ? "ERROR" : "OK");
+ return ret == 0 ? 0 : 1;
+ }
- if (i)
+ if (read)
ret = nand_read(nand, off, &size, (u_char *)addr);
else
ret = nand_write(nand, off, &size, (u_char *)addr);
printf(" %d bytes %s: %s\n", size,
- i ? "read" : "written", ret ? "ERROR" : "OK");
+ read ? "read" : "written", ret ? "ERROR" : "OK");
return ret == 0 ? 0 : 1;
}
+
+ /* 2006-09-28 gc: implement missing commands */
+ if (strcmp(cmd, "markbad") == 0) {
+ addr = (ulong)simple_strtoul(argv[2], NULL, 16);
+
+ int ret = nand->block_markbad(nand, addr);
+ if (ret == 0) {
+ printf("block 0x%08lx successfully marked as bad\n",
+ (ulong) addr);
+ return 0;
+ } else {
+ printf("block 0x%08lx NOT marked as bad! ERROR %d\n",
+ (ulong) addr, ret);
+ }
+ return 1;
+ }
+ if (strcmp(cmd, "biterr") == 0) {
+ /* todo */
+ return 1;
+ }
+
+ if (strcmp(cmd, "lock") == 0) {
+ int tight = 0;
+ int status = 0;
+ if (argc == 3) {
+ if (!strcmp("tight", argv[2]))
+ tight = 1;
+ if (!strcmp("status", argv[2]))
+ status = 1;
+ }
+
+ if (status) {
+ ulong block_start = 0;
+ ulong off;
+ int last_status = -1;
+
+ struct nand_chip *nand_chip = nand->priv;
+ /* check the WP bit */
+ nand_chip->cmdfunc (nand, NAND_CMD_STATUS, -1, -1);
+ printf("device is %swrite protected\n",
+ (nand_chip->read_byte(nand) & 0x80 ?
+ "NOT " : "" ) );
+
+ for (off = 0; off < nand->size; off += nand->oobblock) {
+ int s = nand_get_lock_status(nand, off);
+
+ /* print message only if status has changed
+ * or at end of chip
+ */
+ if (off == nand->size - nand->oobblock
+ || (s != last_status && off != 0)) {
+
+ printf("%08x - %08x: %8d pages %s%s%s\n",
+ block_start,
+ off-1,
+ (off-block_start)/nand->oobblock,
+ ((last_status & NAND_LOCK_STATUS_TIGHT) ? "TIGHT " : ""),
+ ((last_status & NAND_LOCK_STATUS_LOCK) ? "LOCK " : ""),
+ ((last_status & NAND_LOCK_STATUS_UNLOCK) ? "UNLOCK " : ""));
+ }
+
+ last_status = s;
+ }
+ } else {
+ if (!nand_lock(nand, tight)) {
+ printf ("NAND flash successfully locked\n");
+ } else {
+ printf ("Error locking NAND flash. \n");
+ return 1;
+ }
+ }
+ return 0;
+ }
+
+ if (strcmp(cmd, "unlock") == 0) {
+ if (argc == 2) {
+ off = 0;
+ size = nand->size;
+ } else {
+ arg_off_size(argc - 2, argv + 2, &off, &size,
+ nand->size);
+ }
+
+ if (!nand_unlock(nand, off, size)) {
+ printf("NAND flash successfully unlocked\n");
+ } else {
+ printf("Error unlocking NAND flash. "
+ "Write and erase will probably fail\n");
+ return 1;
+ }
+ return 0;
+ }
+
usage:
printf("Usage:\n%s\n", cmdtp->usage);
return 1;
@@ -277,7 +451,9 @@
"nand dump[.oob] off - dump page\n"
"nand scrub - really clean NAND erasing bad blocks (UNSAFE)\n"
"nand markbad off - mark bad block at offset (UNSAFE)\n"
- "nand biterr off - make a bit error at offset (UNSAFE)\n");
+ "nand biterr off - make a bit error at offset (UNSAFE)\n"
+ "nand lock [tight] [status] - bring nand to lock state or display locked pages\n"
+ "nand unlock [offset] [size] - unlock section\n");
int do_nandboot(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
{
@@ -596,7 +772,7 @@
return 1;
}
- printf ("\nNAND %s: device %d offset %ld, size %ld ... ",
+ printf ("\nNAND %s: device %d offset %ld, size %ld ...\n",
(cmd & NANDRW_READ) ? "read" : "write",
curr_device, off, size);
@@ -615,7 +791,7 @@
ulong size = simple_strtoul(argv[3 + clean], NULL, 16);
int ret;
- printf ("\nNAND erase: device %d offset %ld, size %ld ... ",
+ printf ("\nNAND erase: device %d offset %ld, size %ld ...\n",
curr_device, off, size);
ret = nand_legacy_erase (nand_dev_desc + curr_device,
@@ -635,7 +811,7 @@
U_BOOT_CMD(
nand, 5, 1, do_nand,
- "nand - NAND sub-system\n",
+ "nand - legacy NAND sub-system\n",
"info - show available NAND devices\n"
"nand device [dev] - show or set current device\n"
"nand read[.jffs2[s]] addr off size\n"
diff --git a/common/env_nand.c b/common/env_nand.c
index 0a05b09..67c4a4e 100644
--- a/common/env_nand.c
+++ b/common/env_nand.c
@@ -2,7 +2,7 @@
* (C) Copyright 2004
* Jian Zhang, Texas Instruments, jzhang@ti.com.
- * (C) Copyright 2000-2004
+ * (C) Copyright 2000-2006
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* (C) Copyright 2001 Sysgo Real-Time Solutions, GmbH <www.elinos.com>
@@ -76,7 +76,9 @@
/* local functions */
+#if !defined(ENV_IS_EMBEDDED)
static void use_default(void);
+#endif
DECLARE_GLOBAL_DATA_PTR;
@@ -91,11 +93,55 @@
* Mark it OK for now. env_relocate() in env_common.c
* will call our relocate function which will does
* the real validation.
+ *
+ * When using a NAND boot image (like sequoia_nand), the environment
+ * can be embedded or attached to the U-Boot image in NAND flash. This way
+ * the SPL loads not only the U-Boot image from NAND but also the
+ * environment.
*/
int env_init(void)
{
+#if defined(ENV_IS_EMBEDDED)
+ ulong total;
+ int crc1_ok = 0, crc2_ok = 0;
+ env_t *tmp_env1, *tmp_env2;
+
+ total = CFG_ENV_SIZE;
+
+ tmp_env1 = env_ptr;
+ tmp_env2 = (env_t *)((ulong)env_ptr + CFG_ENV_SIZE);
+
+ crc1_ok = (crc32(0, tmp_env1->data, ENV_SIZE) == tmp_env1->crc);
+ crc2_ok = (crc32(0, tmp_env2->data, ENV_SIZE) == tmp_env2->crc);
+
+ if (!crc1_ok && !crc2_ok)
+ gd->env_valid = 0;
+ else if(crc1_ok && !crc2_ok)
+ gd->env_valid = 1;
+ else if(!crc1_ok && crc2_ok)
+ gd->env_valid = 2;
+ else {
+ /* both ok - check serial */
+ if(tmp_env1->flags == 255 && tmp_env2->flags == 0)
+ gd->env_valid = 2;
+ else if(tmp_env2->flags == 255 && tmp_env1->flags == 0)
+ gd->env_valid = 1;
+ else if(tmp_env1->flags > tmp_env2->flags)
+ gd->env_valid = 1;
+ else if(tmp_env2->flags > tmp_env1->flags)
+ gd->env_valid = 2;
+ else /* flags are equal - almost impossible */
+ gd->env_valid = 1;
+ }
+
+ if (gd->env_valid == 1)
+ env_ptr = tmp_env1;
+ else if (gd->env_valid == 2)
+ env_ptr = tmp_env2;
+#else /* ENV_IS_EMBEDDED */
gd->env_addr = (ulong)&default_environment[0];
gd->env_valid = 1;
+#endif /* ENV_IS_EMBEDDED */
return (0);
}
@@ -236,6 +282,7 @@
}
#endif /* CFG_ENV_OFFSET_REDUND */
+#if !defined(ENV_IS_EMBEDDED)
static void use_default()
{
puts ("*** Warning - bad CRC or NAND, using default environment\n\n");
@@ -253,5 +300,6 @@
gd->env_valid = 1;
}
+#endif
#endif /* CFG_ENV_IS_IN_NAND */
diff --git a/common/environment.c b/common/environment.c
index 81471ce..19bdeb0 100644
--- a/common/environment.c
+++ b/common/environment.c
@@ -60,7 +60,8 @@
defined(CONFIG_RRVISION) || \
defined(CONFIG_TRAB) || \
defined(CONFIG_PPCHAMELEONEVB) || \
- defined(CONFIG_M5271EVB)) && \
+ defined(CONFIG_M5271EVB) || \
+ defined(CONFIG_NAND_U_BOOT)) && \
defined(ENV_CRC) /* Environment embedded in U-Boot .ppcenv section */
/* XXX - This only works with GNU C */
# define __PPCENV__ __attribute__ ((section(".ppcenv")))
diff --git a/common/exports.c b/common/exports.c
index ef25338..0cb4396 100644
--- a/common/exports.c
+++ b/common/exports.c
@@ -23,8 +23,11 @@
gd->jt[XF_get_version] = (void *) get_version;
gd->jt[XF_malloc] = (void *) malloc;
gd->jt[XF_free] = (void *) free;
- gd->jt[XF_get_timer] = (void *)get_timer;
- gd->jt[XF_udelay] = (void *)udelay;
+ gd->jt[XF_getenv] = (void *) getenv;
+ gd->jt[XF_setenv] = (void *) setenv;
+ gd->jt[XF_get_timer] = (void *) get_timer;
+ gd->jt[XF_simple_strtoul] = (void *) simple_strtoul;
+ gd->jt[XF_udelay] = (void *) udelay;
#if defined(CONFIG_I386) || defined(CONFIG_PPC)
gd->jt[XF_install_hdlr] = (void *) irq_install_handler;
gd->jt[XF_free_hdlr] = (void *) irq_free_handler;
diff --git a/common/ft_build.c b/common/ft_build.c
index b5a997c..f76c582 100644
--- a/common/ft_build.c
+++ b/common/ft_build.c
@@ -219,7 +219,9 @@
return;
if (is_printable_string(data, len)) {
- printf(" = \"%s\"", (char *)data);
+ puts(" = \"");
+ puts(data);
+ puts("\"");
return;
}
diff --git a/common/lcd.c b/common/lcd.c
index 0be1912..df31ca9 100644
--- a/common/lcd.c
+++ b/common/lcd.c
@@ -585,6 +585,7 @@
uchar *bmap;
ushort padded_line;
unsigned long width, height;
+ unsigned long pwidth = panel_info.vl_col;
unsigned colors,bpix;
unsigned long compression;
#if defined(CONFIG_PXA250)
@@ -628,6 +629,8 @@
cmap = (ushort *)fbi->palette;
#elif defined(CONFIG_MPC823)
cmap = (ushort *)&(cp->lcd_cmap[255*sizeof(ushort)]);
+#elif defined(CONFIG_MCC200)
+ /* MCC200 LCD doesn't need CMAP, supports 1bpp b&w only */
#else
# error "Don't know location of color map"
#endif
@@ -652,9 +655,28 @@
}
}
+ /*
+ * BMP format for Monochrome assumes that the state of a
+ * pixel is described on a per Bit basis, not per Byte.
+ * So, in case of Monochrome BMP we should align widths
+ * on a byte boundary and convert them from Bit to Byte
+ * units.
+ * Probably, PXA250 and MPC823 process 1bpp BMP images in
+ * their own ways, so make the converting to be MCC200
+ * specific.
+ */
+#if defined(CONFIG_MCC200)
+ if (bpix==1)
+ {
+ width = ((width + 7) & ~7) >> 3;
+ x = ((x + 7) & ~7) >> 3;
+ pwidth= ((pwidth + 7) & ~7) >> 3;
+ }
+#endif
+
padded_line = (width&0x3) ? ((width&~0x3)+4) : (width);
- if ((x + width)>panel_info.vl_col)
- width = panel_info.vl_col - x;
+ if ((x + width)>pwidth)
+ width = pwidth - x;
if ((y + height)>panel_info.vl_row)
height = panel_info.vl_row - y;
@@ -666,7 +688,7 @@
for (j = 0; j < width ; j++)
#if defined(CONFIG_PXA250)
*(fb++)=*(bmap++);
-#elif defined(CONFIG_MPC823)
+#elif defined(CONFIG_MPC823) || defined(CONFIG_MCC200)
*(fb++)=255-*(bmap++);
#endif
bmap += (width - padded_line);
diff --git a/common/serial.c b/common/serial.c
index 38057d2..605d4e3 100644
--- a/common/serial.c
+++ b/common/serial.c
@@ -42,7 +42,19 @@
return &serial_scc_device;
#elif defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_440) \
|| defined(CONFIG_405EP) || defined(CONFIG_MPC5xxx)
-#if defined(CONFIG_UART1_CONSOLE)
+#if defined(CONFIG_CONS_INDEX) && defined(CFG_NS16550_SERIAL)
+#if (CONFIG_CONS_INDEX==1)
+ return &eserial1_device;
+#elif (CONFIG_CONS_INDEX==2)
+ return &eserial2_device;
+#elif (CONFIG_CONS_INDEX==3)
+ return &eserial3_device;
+#elif (CONFIG_CONS_INDEX==4)
+ return &eserial4_device;
+#else
+#error "Bad CONFIG_CONS_INDEX."
+#endif
+#elif defined(CONFIG_UART1_CONSOLE)
return &serial1_device;
#else
return &serial0_device;
@@ -84,6 +96,20 @@
serial_register(&serial1_device);
#endif
+#if defined(CFG_NS16550_SERIAL)
+#if defined(CFG_NS16550_COM1)
+ serial_register(&eserial1_device);
+#endif
+#if defined(CFG_NS16550_COM2)
+ serial_register(&eserial2_device);
+#endif
+#if defined(CFG_NS16550_COM3)
+ serial_register(&eserial3_device);
+#endif
+#if defined(CFG_NS16550_COM4)
+ serial_register(&eserial4_device);
+#endif
+#endif /* CFG_NS16550_SERIAL */
serial_assign (default_serial_console ()->name);
}
diff --git a/common/usb_storage.c b/common/usb_storage.c
index e64470c..69ecf18 100644
--- a/common/usb_storage.c
+++ b/common/usb_storage.c
@@ -916,6 +916,28 @@
}
+#ifdef CONFIG_USB_BIN_FIXUP
+/*
+ * Some USB storage devices queried for SCSI identification data respond with
+ * binary strings, which if output to the console freeze the terminal. The
+ * workaround is to modify the vendor and product strings read from such
+ * device with proper values (as reported by 'usb info').
+ *
+ * Vendor and product length limits are taken from the definition of
+ * block_dev_desc_t in include/part.h.
+ */
+static void usb_bin_fixup(struct usb_device_descriptor descriptor,
+ unsigned char vendor[],
+ unsigned char product[]) {
+ const unsigned char max_vendor_len = 40;
+ const unsigned char max_product_len = 20;
+ if (descriptor.idVendor == 0x0424 && descriptor.idProduct == 0x223a) {
+ strncpy(vendor, "SMSC", max_vendor_len);
+ strncpy(product, "Flash Media Cntrller", max_product_len);
+ }
+}
+#endif /* CONFIG_USB_BIN_FIXUP */
+
#define USB_MAX_READ_BLK 20
unsigned long usb_stor_read(int device, unsigned long blknr, unsigned long blkcnt, unsigned long *buffer)
@@ -1171,6 +1193,9 @@
dev_desc->vendor[8] = 0;
dev_desc->product[16] = 0;
dev_desc->revision[4] = 0;
+#ifdef CONFIG_USB_BIN_FIXUP
+ usb_bin_fixup(dev->descriptor, dev_desc->vendor, dev_desc->product);
+#endif /* CONFIG_USB_BIN_FIXUP */
USB_STOR_PRINTF("ISO Vers %X, Response Data %X\n",usb_stor_buf[2],usb_stor_buf[3]);
if(usb_test_unit_ready(pccb,ss)) {
printf("Device NOT ready\n Request Sense returned %02X %02X %02X\n",pccb->sense_buf[2],pccb->sense_buf[12],pccb->sense_buf[13]);
diff --git a/common/xyzModem.c b/common/xyzModem.c
index d1d66e8..a209dfa 100644
--- a/common/xyzModem.c
+++ b/common/xyzModem.c
@@ -69,135 +69,157 @@
#define BSP 0x08
#define NAK 0x15
#define CAN 0x18
-#define EOF 0x1A /* ^Z for DOS officionados */
+#define EOF 0x1A /* ^Z for DOS officionados */
#define USE_YMODEM_LENGTH
/* Data & state local to the protocol */
-static struct {
+static struct
+{
#ifdef REDBOOT
- hal_virtual_comm_table_t* __chan;
+ hal_virtual_comm_table_t *__chan;
#else
- int *__chan;
+ int *__chan;
#endif
- unsigned char pkt[1024], *bufp;
- unsigned char blk,cblk,crc1,crc2;
- unsigned char next_blk; /* Expected block */
- int len, mode, total_retries;
- int total_SOH, total_STX, total_CAN;
- bool crc_mode, at_eof, tx_ack;
+ unsigned char pkt[1024], *bufp;
+ unsigned char blk, cblk, crc1, crc2;
+ unsigned char next_blk; /* Expected block */
+ int len, mode, total_retries;
+ int total_SOH, total_STX, total_CAN;
+ bool crc_mode, at_eof, tx_ack;
#ifdef USE_YMODEM_LENGTH
- unsigned long file_length, read_length;
+ unsigned long file_length, read_length;
#endif
} xyz;
-#define xyzModem_CHAR_TIMEOUT 2000 /* 2 seconds */
+#define xyzModem_CHAR_TIMEOUT 2000 /* 2 seconds */
#define xyzModem_MAX_RETRIES 20
#define xyzModem_MAX_RETRIES_WITH_CRC 10
-#define xyzModem_CAN_COUNT 3 /* Wait for 3 CAN before quitting */
+#define xyzModem_CAN_COUNT 3 /* Wait for 3 CAN before quitting */
-#ifndef REDBOOT /*SB */
+#ifndef REDBOOT /*SB */
typedef int cyg_int32;
-int CYGACC_COMM_IF_GETC_TIMEOUT (char chan,char *c) {
+int
+CYGACC_COMM_IF_GETC_TIMEOUT (char chan, char *c)
+{
#define DELAY 20
- unsigned long counter=0;
- while (!tstc() && (counter < xyzModem_CHAR_TIMEOUT*1000/DELAY)) {
- udelay(DELAY);
- counter++;
- }
- if (tstc()) {
- *c=getc();
- return 1;
- }
- return 0;
+ unsigned long counter = 0;
+ while (!tstc () && (counter < xyzModem_CHAR_TIMEOUT * 1000 / DELAY))
+ {
+ udelay (DELAY);
+ counter++;
+ }
+ if (tstc ())
+ {
+ *c = getc ();
+ return 1;
+ }
+ return 0;
}
-void CYGACC_COMM_IF_PUTC(char x,char y) {
- putc(y);
+void
+CYGACC_COMM_IF_PUTC (char x, char y)
+{
+ putc (y);
}
/* Validate a hex character */
__inline__ static bool
-_is_hex(char c)
+_is_hex (char c)
{
- return (((c >= '0') && (c <= '9')) ||
- ((c >= 'A') && (c <= 'F')) ||
- ((c >= 'a') && (c <= 'f')));
+ return (((c >= '0') && (c <= '9')) ||
+ ((c >= 'A') && (c <= 'F')) || ((c >= 'a') && (c <= 'f')));
}
/* Convert a single hex nibble */
__inline__ static int
-_from_hex(char c)
+_from_hex (char c)
{
- int ret = 0;
+ int ret = 0;
- if ((c >= '0') && (c <= '9')) {
- ret = (c - '0');
- } else if ((c >= 'a') && (c <= 'f')) {
- ret = (c - 'a' + 0x0a);
- } else if ((c >= 'A') && (c <= 'F')) {
- ret = (c - 'A' + 0x0A);
+ if ((c >= '0') && (c <= '9'))
+ {
+ ret = (c - '0');
}
- return ret;
+ else if ((c >= 'a') && (c <= 'f'))
+ {
+ ret = (c - 'a' + 0x0a);
+ }
+ else if ((c >= 'A') && (c <= 'F'))
+ {
+ ret = (c - 'A' + 0x0A);
+ }
+ return ret;
}
/* Convert a character to lower case */
__inline__ static char
-_tolower(char c)
+_tolower (char c)
{
- if ((c >= 'A') && (c <= 'Z')) {
- c = (c - 'A') + 'a';
+ if ((c >= 'A') && (c <= 'Z'))
+ {
+ c = (c - 'A') + 'a';
}
- return c;
+ return c;
}
/* Parse (scan) a number */
bool
-parse_num(char *s, unsigned long *val, char **es, char *delim)
+parse_num (char *s, unsigned long *val, char **es, char *delim)
{
- bool first = true;
- int radix = 10;
- char c;
- unsigned long result = 0;
- int digit;
+ bool first = true;
+ int radix = 10;
+ char c;
+ unsigned long result = 0;
+ int digit;
- while (*s == ' ') s++;
- while (*s) {
- if (first && (s[0] == '0') && (_tolower(s[1]) == 'x')) {
- radix = 16;
- s += 2;
- }
- first = false;
- c = *s++;
- if (_is_hex(c) && ((digit = _from_hex(c)) < radix)) {
- /* Valid digit */
+ while (*s == ' ')
+ s++;
+ while (*s)
+ {
+ if (first && (s[0] == '0') && (_tolower (s[1]) == 'x'))
+ {
+ radix = 16;
+ s += 2;
+ }
+ first = false;
+ c = *s++;
+ if (_is_hex (c) && ((digit = _from_hex (c)) < radix))
+ {
+ /* Valid digit */
#ifdef CYGPKG_HAL_MIPS
- /* FIXME: tx49 compiler generates 0x2539018 for MUL which */
- /* isn't any good. */
- if (16 == radix)
- result = result << 4;
- else
- result = 10 * result;
- result += digit;
+ /* FIXME: tx49 compiler generates 0x2539018 for MUL which */
+ /* isn't any good. */
+ if (16 == radix)
+ result = result << 4;
+ else
+ result = 10 * result;
+ result += digit;
#else
- result = (result * radix) + digit;
+ result = (result * radix) + digit;
#endif
- } else {
- if (delim != (char *)0) {
- /* See if this character is one of the delimiters */
- char *dp = delim;
- while (*dp && (c != *dp)) dp++;
- if (*dp) break; /* Found a good delimiter */
- }
- return false; /* Malformatted number */
- }
+ }
+ else
+ {
+ if (delim != (char *) 0)
+ {
+ /* See if this character is one of the delimiters */
+ char *dp = delim;
+ while (*dp && (c != *dp))
+ dp++;
+ if (*dp)
+ break; /* Found a good delimiter */
+ }
+ return false; /* Malformatted number */
+ }
}
- *val = result;
- if (es != (char **)0) {
- *es = s;
+ *val = result;
+ if (es != (char **) 0)
+ {
+ *es = s;
}
- return true;
+ return true;
}
#endif
@@ -211,24 +233,26 @@
* messages.
*/
static int
-zm_dprintf(char *fmt, ...)
+zm_dprintf (char *fmt, ...)
{
- int cur_console;
- va_list args;
+ int cur_console;
+ va_list args;
- va_start(args, fmt);
+ va_start (args, fmt);
#ifdef REDBOOT
- cur_console = CYGACC_CALL_IF_SET_CONSOLE_COMM(CYGNUM_CALL_IF_SET_COMM_ID_QUERY_CURRENT);
- CYGACC_CALL_IF_SET_CONSOLE_COMM(1);
+ cur_console =
+ CYGACC_CALL_IF_SET_CONSOLE_COMM
+ (CYGNUM_CALL_IF_SET_COMM_ID_QUERY_CURRENT);
+ CYGACC_CALL_IF_SET_CONSOLE_COMM (1);
#endif
- diag_vprintf(fmt, args);
+ diag_vprintf (fmt, args);
#ifdef REDBOOT
- CYGACC_CALL_IF_SET_CONSOLE_COMM(cur_console);
+ CYGACC_CALL_IF_SET_CONSOLE_COMM (cur_console);
#endif
}
static void
-zm_flush(void)
+zm_flush (void)
{
}
@@ -238,42 +262,43 @@
*/
#define FINAL
#ifdef FINAL
-static char *zm_out = (char *)0x00380000;
-static char *zm_out_start = (char *)0x00380000;
+static char *zm_out = (char *) 0x00380000;
+static char *zm_out_start = (char *) 0x00380000;
#else
static char zm_buf[8192];
-static char *zm_out=zm_buf;
+static char *zm_out = zm_buf;
static char *zm_out_start = zm_buf;
#endif
static int
-zm_dprintf(char *fmt, ...)
+zm_dprintf (char *fmt, ...)
{
- int len;
- va_list args;
+ int len;
+ va_list args;
- va_start(args, fmt);
- len = diag_vsprintf(zm_out, fmt, args);
- zm_out += len;
- return len;
+ va_start (args, fmt);
+ len = diag_vsprintf (zm_out, fmt, args);
+ zm_out += len;
+ return len;
}
static void
-zm_flush(void)
+zm_flush (void)
{
#ifdef REDBOOT
- char *p = zm_out_start;
- while (*p) mon_write_char(*p++);
+ char *p = zm_out_start;
+ while (*p)
+ mon_write_char (*p++);
#endif
- zm_out = zm_out_start;
+ zm_out = zm_out_start;
}
#endif
static void
-zm_dump_buf(void *buf, int len)
+zm_dump_buf (void *buf, int len)
{
#ifdef REDBOOT
- diag_vdump_buf_with_offset(zm_dprintf, buf, len, 0);
+ diag_vdump_buf_with_offset (zm_dprintf, buf, len, 0);
#else
#endif
@@ -283,22 +308,22 @@
static unsigned char *zm_bp;
static void
-zm_new(void)
+zm_new (void)
{
- zm_bp = zm_buf;
+ zm_bp = zm_buf;
}
static void
-zm_save(unsigned char c)
+zm_save (unsigned char c)
{
- *zm_bp++ = c;
+ *zm_bp++ = c;
}
static void
-zm_dump(int line)
+zm_dump (int line)
{
- zm_dprintf("Packet at line: %d\n", line);
- zm_dump_buf(zm_buf, zm_bp-zm_buf);
+ zm_dprintf ("Packet at line: %d\n", line);
+ zm_dump_buf (zm_buf, zm_bp - zm_buf);
}
#define ZM_DEBUG(x) x
@@ -308,439 +333,517 @@
/* Wait for the line to go idle */
static void
-xyzModem_flush(void)
+xyzModem_flush (void)
{
- int res;
- char c;
- while (true) {
- res = CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, &c);
- if (!res) return;
+ int res;
+ char c;
+ while (true)
+ {
+ res = CYGACC_COMM_IF_GETC_TIMEOUT (*xyz.__chan, &c);
+ if (!res)
+ return;
}
}
static int
-xyzModem_get_hdr(void)
+xyzModem_get_hdr (void)
{
- char c;
- int res;
- bool hdr_found = false;
- int i, can_total, hdr_chars;
- unsigned short cksum;
+ char c;
+ int res;
+ bool hdr_found = false;
+ int i, can_total, hdr_chars;
+ unsigned short cksum;
- ZM_DEBUG(zm_new());
- /* Find the start of a header */
- can_total = 0;
- hdr_chars = 0;
+ ZM_DEBUG (zm_new ());
+ /* Find the start of a header */
+ can_total = 0;
+ hdr_chars = 0;
- if (xyz.tx_ack) {
- CYGACC_COMM_IF_PUTC(*xyz.__chan, ACK);
- xyz.tx_ack = false;
+ if (xyz.tx_ack)
+ {
+ CYGACC_COMM_IF_PUTC (*xyz.__chan, ACK);
+ xyz.tx_ack = false;
}
- while (!hdr_found) {
- res = CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, &c);
- ZM_DEBUG(zm_save(c));
- if (res) {
- hdr_chars++;
- switch (c) {
- case SOH:
- xyz.total_SOH++;
- case STX:
- if (c == STX) xyz.total_STX++;
- hdr_found = true;
- break;
- case CAN:
- xyz.total_CAN++;
- ZM_DEBUG(zm_dump(__LINE__));
- if (++can_total == xyzModem_CAN_COUNT) {
- return xyzModem_cancel;
- } else {
- /* Wait for multiple CAN to avoid early quits */
- break;
- }
- case EOT:
- /* EOT only supported if no noise */
- if (hdr_chars == 1) {
- CYGACC_COMM_IF_PUTC(*xyz.__chan, ACK);
- ZM_DEBUG(zm_dprintf("ACK on EOT #%d\n", __LINE__));
- ZM_DEBUG(zm_dump(__LINE__));
- return xyzModem_eof;
- }
- default:
- /* Ignore, waiting for start of header */
- ;
- }
- } else {
- /* Data stream timed out */
- xyzModem_flush(); /* Toss any current input */
- ZM_DEBUG(zm_dump(__LINE__));
- CYGACC_CALL_IF_DELAY_US((cyg_int32)250000);
- return xyzModem_timeout;
- }
+ while (!hdr_found)
+ {
+ res = CYGACC_COMM_IF_GETC_TIMEOUT (*xyz.__chan, &c);
+ ZM_DEBUG (zm_save (c));
+ if (res)
+ {
+ hdr_chars++;
+ switch (c)
+ {
+ case SOH:
+ xyz.total_SOH++;
+ case STX:
+ if (c == STX)
+ xyz.total_STX++;
+ hdr_found = true;
+ break;
+ case CAN:
+ xyz.total_CAN++;
+ ZM_DEBUG (zm_dump (__LINE__));
+ if (++can_total == xyzModem_CAN_COUNT)
+ {
+ return xyzModem_cancel;
+ }
+ else
+ {
+ /* Wait for multiple CAN to avoid early quits */
+ break;
+ }
+ case EOT:
+ /* EOT only supported if no noise */
+ if (hdr_chars == 1)
+ {
+ CYGACC_COMM_IF_PUTC (*xyz.__chan, ACK);
+ ZM_DEBUG (zm_dprintf ("ACK on EOT #%d\n", __LINE__));
+ ZM_DEBUG (zm_dump (__LINE__));
+ return xyzModem_eof;
+ }
+ default:
+ /* Ignore, waiting for start of header */
+ ;
+ }
+ }
+ else
+ {
+ /* Data stream timed out */
+ xyzModem_flush (); /* Toss any current input */
+ ZM_DEBUG (zm_dump (__LINE__));
+ CYGACC_CALL_IF_DELAY_US ((cyg_int32) 250000);
+ return xyzModem_timeout;
+ }
}
- /* Header found, now read the data */
- res = CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, (char *)&xyz.blk);
- ZM_DEBUG(zm_save(xyz.blk));
- if (!res) {
- ZM_DEBUG(zm_dump(__LINE__));
- return xyzModem_timeout;
+ /* Header found, now read the data */
+ res = CYGACC_COMM_IF_GETC_TIMEOUT (*xyz.__chan, (char *) &xyz.blk);
+ ZM_DEBUG (zm_save (xyz.blk));
+ if (!res)
+ {
+ ZM_DEBUG (zm_dump (__LINE__));
+ return xyzModem_timeout;
}
- res = CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, (char *)&xyz.cblk);
- ZM_DEBUG(zm_save(xyz.cblk));
- if (!res) {
- ZM_DEBUG(zm_dump(__LINE__));
- return xyzModem_timeout;
+ res = CYGACC_COMM_IF_GETC_TIMEOUT (*xyz.__chan, (char *) &xyz.cblk);
+ ZM_DEBUG (zm_save (xyz.cblk));
+ if (!res)
+ {
+ ZM_DEBUG (zm_dump (__LINE__));
+ return xyzModem_timeout;
}
- xyz.len = (c == SOH) ? 128 : 1024;
- xyz.bufp = xyz.pkt;
- for (i = 0; i < xyz.len; i++) {
- res = CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, &c);
- ZM_DEBUG(zm_save(c));
- if (res) {
- xyz.pkt[i] = c;
- } else {
- ZM_DEBUG(zm_dump(__LINE__));
- return xyzModem_timeout;
- }
+ xyz.len = (c == SOH) ? 128 : 1024;
+ xyz.bufp = xyz.pkt;
+ for (i = 0; i < xyz.len; i++)
+ {
+ res = CYGACC_COMM_IF_GETC_TIMEOUT (*xyz.__chan, &c);
+ ZM_DEBUG (zm_save (c));
+ if (res)
+ {
+ xyz.pkt[i] = c;
+ }
+ else
+ {
+ ZM_DEBUG (zm_dump (__LINE__));
+ return xyzModem_timeout;
+ }
+ }
+ res = CYGACC_COMM_IF_GETC_TIMEOUT (*xyz.__chan, (char *) &xyz.crc1);
+ ZM_DEBUG (zm_save (xyz.crc1));
+ if (!res)
+ {
+ ZM_DEBUG (zm_dump (__LINE__));
+ return xyzModem_timeout;
}
- res = CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, (char *)&xyz.crc1);
- ZM_DEBUG(zm_save(xyz.crc1));
- if (!res) {
- ZM_DEBUG(zm_dump(__LINE__));
- return xyzModem_timeout;
+ if (xyz.crc_mode)
+ {
+ res = CYGACC_COMM_IF_GETC_TIMEOUT (*xyz.__chan, (char *) &xyz.crc2);
+ ZM_DEBUG (zm_save (xyz.crc2));
+ if (!res)
+ {
+ ZM_DEBUG (zm_dump (__LINE__));
+ return xyzModem_timeout;
+ }
}
- if (xyz.crc_mode) {
- res = CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, (char *)&xyz.crc2);
- ZM_DEBUG(zm_save(xyz.crc2));
- if (!res) {
- ZM_DEBUG(zm_dump(__LINE__));
- return xyzModem_timeout;
- }
+ ZM_DEBUG (zm_dump (__LINE__));
+ /* Validate the message */
+ if ((xyz.blk ^ xyz.cblk) != (unsigned char) 0xFF)
+ {
+ ZM_DEBUG (zm_dprintf
+ ("Framing error - blk: %x/%x/%x\n", xyz.blk, xyz.cblk,
+ (xyz.blk ^ xyz.cblk)));
+ ZM_DEBUG (zm_dump_buf (xyz.pkt, xyz.len));
+ xyzModem_flush ();
+ return xyzModem_frame;
}
- ZM_DEBUG(zm_dump(__LINE__));
- /* Validate the message */
- if ((xyz.blk ^ xyz.cblk) != (unsigned char)0xFF) {
- ZM_DEBUG(zm_dprintf("Framing error - blk: %x/%x/%x\n", xyz.blk, xyz.cblk, (xyz.blk ^ xyz.cblk)));
- ZM_DEBUG(zm_dump_buf(xyz.pkt, xyz.len));
- xyzModem_flush();
- return xyzModem_frame;
+ /* Verify checksum/CRC */
+ if (xyz.crc_mode)
+ {
+ cksum = cyg_crc16 (xyz.pkt, xyz.len);
+ if (cksum != ((xyz.crc1 << 8) | xyz.crc2))
+ {
+ ZM_DEBUG (zm_dprintf ("CRC error - recvd: %02x%02x, computed: %x\n",
+ xyz.crc1, xyz.crc2, cksum & 0xFFFF));
+ return xyzModem_cksum;
+ }
}
- /* Verify checksum/CRC */
- if (xyz.crc_mode) {
- cksum = cyg_crc16(xyz.pkt, xyz.len);
- if (cksum != ((xyz.crc1 << 8) | xyz.crc2)) {
- ZM_DEBUG(zm_dprintf("CRC error - recvd: %02x%02x, computed: %x\n",
- xyz.crc1, xyz.crc2, cksum & 0xFFFF));
- return xyzModem_cksum;
- }
- } else {
- cksum = 0;
- for (i = 0; i < xyz.len; i++) {
- cksum += xyz.pkt[i];
- }
- if (xyz.crc1 != (cksum & 0xFF)) {
- ZM_DEBUG(zm_dprintf("Checksum error - recvd: %x, computed: %x\n", xyz.crc1, cksum & 0xFF));
- return xyzModem_cksum;
- }
+ else
+ {
+ cksum = 0;
+ for (i = 0; i < xyz.len; i++)
+ {
+ cksum += xyz.pkt[i];
+ }
+ if (xyz.crc1 != (cksum & 0xFF))
+ {
+ ZM_DEBUG (zm_dprintf
+ ("Checksum error - recvd: %x, computed: %x\n", xyz.crc1,
+ cksum & 0xFF));
+ return xyzModem_cksum;
+ }
}
- /* If we get here, the message passes [structural] muster */
- return 0;
+ /* If we get here, the message passes [structural] muster */
+ return 0;
}
int
-xyzModem_stream_open(connection_info_t *info, int *err)
+xyzModem_stream_open (connection_info_t * info, int *err)
{
#ifdef REDBOOT
- int console_chan;
+ int console_chan;
#endif
- int stat = 0;
- int retries = xyzModem_MAX_RETRIES;
- int crc_retries = xyzModem_MAX_RETRIES_WITH_CRC;
+ int stat = 0;
+ int retries = xyzModem_MAX_RETRIES;
+ int crc_retries = xyzModem_MAX_RETRIES_WITH_CRC;
/* ZM_DEBUG(zm_out = zm_out_start); */
#ifdef xyzModem_zmodem
- if (info->mode == xyzModem_zmodem) {
- *err = xyzModem_noZmodem;
- return -1;
+ if (info->mode == xyzModem_zmodem)
+ {
+ *err = xyzModem_noZmodem;
+ return -1;
}
#endif
#ifdef REDBOOT
- /* Set up the I/O channel. Note: this allows for using a different port in the future */
- console_chan = CYGACC_CALL_IF_SET_CONSOLE_COMM(CYGNUM_CALL_IF_SET_COMM_ID_QUERY_CURRENT);
- if (info->chan >= 0) {
- CYGACC_CALL_IF_SET_CONSOLE_COMM(info->chan);
- } else {
- CYGACC_CALL_IF_SET_CONSOLE_COMM(console_chan);
+ /* Set up the I/O channel. Note: this allows for using a different port in the future */
+ console_chan =
+ CYGACC_CALL_IF_SET_CONSOLE_COMM
+ (CYGNUM_CALL_IF_SET_COMM_ID_QUERY_CURRENT);
+ if (info->chan >= 0)
+ {
+ CYGACC_CALL_IF_SET_CONSOLE_COMM (info->chan);
}
- xyz.__chan = CYGACC_CALL_IF_CONSOLE_PROCS();
+ else
+ {
+ CYGACC_CALL_IF_SET_CONSOLE_COMM (console_chan);
+ }
+ xyz.__chan = CYGACC_CALL_IF_CONSOLE_PROCS ();
- CYGACC_CALL_IF_SET_CONSOLE_COMM(console_chan);
- CYGACC_COMM_IF_CONTROL(*xyz.__chan, __COMMCTL_SET_TIMEOUT, xyzModem_CHAR_TIMEOUT);
+ CYGACC_CALL_IF_SET_CONSOLE_COMM (console_chan);
+ CYGACC_COMM_IF_CONTROL (*xyz.__chan, __COMMCTL_SET_TIMEOUT,
+ xyzModem_CHAR_TIMEOUT);
#else
/* TODO: CHECK ! */
- int dummy;
- xyz.__chan=&dummy;
+ int dummy;
+ xyz.__chan = &dummy;
#endif
- xyz.len = 0;
- xyz.crc_mode = true;
- xyz.at_eof = false;
- xyz.tx_ack = false;
- xyz.mode = info->mode;
- xyz.total_retries = 0;
- xyz.total_SOH = 0;
- xyz.total_STX = 0;
- xyz.total_CAN = 0;
+ xyz.len = 0;
+ xyz.crc_mode = true;
+ xyz.at_eof = false;
+ xyz.tx_ack = false;
+ xyz.mode = info->mode;
+ xyz.total_retries = 0;
+ xyz.total_SOH = 0;
+ xyz.total_STX = 0;
+ xyz.total_CAN = 0;
#ifdef USE_YMODEM_LENGTH
- xyz.read_length = 0;
- xyz.file_length = 0;
+ xyz.read_length = 0;
+ xyz.file_length = 0;
#endif
- CYGACC_COMM_IF_PUTC(*xyz.__chan, (xyz.crc_mode ? 'C' : NAK));
+ CYGACC_COMM_IF_PUTC (*xyz.__chan, (xyz.crc_mode ? 'C' : NAK));
- if (xyz.mode == xyzModem_xmodem) {
- /* X-modem doesn't have an information header - exit here */
- xyz.next_blk = 1;
- return 0;
+ if (xyz.mode == xyzModem_xmodem)
+ {
+ /* X-modem doesn't have an information header - exit here */
+ xyz.next_blk = 1;
+ return 0;
}
- while (retries-- > 0) {
- stat = xyzModem_get_hdr();
- if (stat == 0) {
- /* Y-modem file information header */
- if (xyz.blk == 0) {
+ while (retries-- > 0)
+ {
+ stat = xyzModem_get_hdr ();
+ if (stat == 0)
+ {
+ /* Y-modem file information header */
+ if (xyz.blk == 0)
+ {
#ifdef USE_YMODEM_LENGTH
- /* skip filename */
- while (*xyz.bufp++);
- /* get the length */
- parse_num((char *)xyz.bufp, &xyz.file_length, NULL, " ");
+ /* skip filename */
+ while (*xyz.bufp++);
+ /* get the length */
+ parse_num ((char *) xyz.bufp, &xyz.file_length, NULL, " ");
#endif
- /* The rest of the file name data block quietly discarded */
- xyz.tx_ack = true;
- }
- xyz.next_blk = 1;
- xyz.len = 0;
- return 0;
- } else
- if (stat == xyzModem_timeout) {
- if (--crc_retries <= 0) xyz.crc_mode = false;
- CYGACC_CALL_IF_DELAY_US(5*100000); /* Extra delay for startup */
- CYGACC_COMM_IF_PUTC(*xyz.__chan, (xyz.crc_mode ? 'C' : NAK));
- xyz.total_retries++;
- ZM_DEBUG(zm_dprintf("NAK (%d)\n", __LINE__));
- }
- if (stat == xyzModem_cancel) {
- break;
- }
+ /* The rest of the file name data block quietly discarded */
+ xyz.tx_ack = true;
+ }
+ xyz.next_blk = 1;
+ xyz.len = 0;
+ return 0;
+ }
+ else if (stat == xyzModem_timeout)
+ {
+ if (--crc_retries <= 0)
+ xyz.crc_mode = false;
+ CYGACC_CALL_IF_DELAY_US (5 * 100000); /* Extra delay for startup */
+ CYGACC_COMM_IF_PUTC (*xyz.__chan, (xyz.crc_mode ? 'C' : NAK));
+ xyz.total_retries++;
+ ZM_DEBUG (zm_dprintf ("NAK (%d)\n", __LINE__));
+ }
+ if (stat == xyzModem_cancel)
+ {
+ break;
+ }
}
- *err = stat;
- ZM_DEBUG(zm_flush());
- return -1;
+ *err = stat;
+ ZM_DEBUG (zm_flush ());
+ return -1;
}
int
-xyzModem_stream_read(char *buf, int size, int *err)
+xyzModem_stream_read (char *buf, int size, int *err)
{
- int stat, total, len;
- int retries;
+ int stat, total, len;
+ int retries;
- total = 0;
- stat = xyzModem_cancel;
- /* Try and get 'size' bytes into the buffer */
- while (!xyz.at_eof && (size > 0)) {
- if (xyz.len == 0) {
- retries = xyzModem_MAX_RETRIES;
- while (retries-- > 0) {
- stat = xyzModem_get_hdr();
- if (stat == 0) {
- if (xyz.blk == xyz.next_blk) {
- xyz.tx_ack = true;
- ZM_DEBUG(zm_dprintf("ACK block %d (%d)\n", xyz.blk, __LINE__));
- xyz.next_blk = (xyz.next_blk + 1) & 0xFF;
+ total = 0;
+ stat = xyzModem_cancel;
+ /* Try and get 'size' bytes into the buffer */
+ while (!xyz.at_eof && (size > 0))
+ {
+ if (xyz.len == 0)
+ {
+ retries = xyzModem_MAX_RETRIES;
+ while (retries-- > 0)
+ {
+ stat = xyzModem_get_hdr ();
+ if (stat == 0)
+ {
+ if (xyz.blk == xyz.next_blk)
+ {
+ xyz.tx_ack = true;
+ ZM_DEBUG (zm_dprintf
+ ("ACK block %d (%d)\n", xyz.blk, __LINE__));
+ xyz.next_blk = (xyz.next_blk + 1) & 0xFF;
#if defined(xyzModem_zmodem) || defined(USE_YMODEM_LENGTH)
- if (xyz.mode == xyzModem_xmodem || xyz.file_length == 0) {
+ if (xyz.mode == xyzModem_xmodem || xyz.file_length == 0)
+ {
#else
- if (1) {
+ if (1)
+ {
#endif
- /* Data blocks can be padded with ^Z (EOF) characters */
- /* This code tries to detect and remove them */
- if ((xyz.bufp[xyz.len-1] == EOF) &&
- (xyz.bufp[xyz.len-2] == EOF) &&
- (xyz.bufp[xyz.len-3] == EOF)) {
- while (xyz.len && (xyz.bufp[xyz.len-1] == EOF)) {
- xyz.len--;
- }
- }
- }
+ /* Data blocks can be padded with ^Z (EOF) characters */
+ /* This code tries to detect and remove them */
+ if ((xyz.bufp[xyz.len - 1] == EOF) &&
+ (xyz.bufp[xyz.len - 2] == EOF) &&
+ (xyz.bufp[xyz.len - 3] == EOF))
+ {
+ while (xyz.len
+ && (xyz.bufp[xyz.len - 1] == EOF))
+ {
+ xyz.len--;
+ }
+ }
+ }
#ifdef USE_YMODEM_LENGTH
- /*
- * See if accumulated length exceeds that of the file.
- * If so, reduce size (i.e., cut out pad bytes)
- * Only do this for Y-modem (and Z-modem should it ever
- * be supported since it can fall back to Y-modem mode).
- */
- if (xyz.mode != xyzModem_xmodem && 0 != xyz.file_length) {
- xyz.read_length += xyz.len;
- if (xyz.read_length > xyz.file_length) {
- xyz.len -= (xyz.read_length - xyz.file_length);
- }
- }
+ /*
+ * See if accumulated length exceeds that of the file.
+ * If so, reduce size (i.e., cut out pad bytes)
+ * Only do this for Y-modem (and Z-modem should it ever
+ * be supported since it can fall back to Y-modem mode).
+ */
+ if (xyz.mode != xyzModem_xmodem && 0 != xyz.file_length)
+ {
+ xyz.read_length += xyz.len;
+ if (xyz.read_length > xyz.file_length)
+ {
+ xyz.len -= (xyz.read_length - xyz.file_length);
+ }
+ }
#endif
- break;
- } else if (xyz.blk == ((xyz.next_blk - 1) & 0xFF)) {
- /* Just re-ACK this so sender will get on with it */
- CYGACC_COMM_IF_PUTC(*xyz.__chan, ACK);
- continue; /* Need new header */
- } else {
- stat = xyzModem_sequence;
- }
- }
- if (stat == xyzModem_cancel) {
- break;
- }
- if (stat == xyzModem_eof) {
- CYGACC_COMM_IF_PUTC(*xyz.__chan, ACK);
- ZM_DEBUG(zm_dprintf("ACK (%d)\n", __LINE__));
- if (xyz.mode == xyzModem_ymodem) {
- CYGACC_COMM_IF_PUTC(*xyz.__chan, (xyz.crc_mode ? 'C' : NAK));
- xyz.total_retries++;
- ZM_DEBUG(zm_dprintf("Reading Final Header\n"));
- stat = xyzModem_get_hdr();
- CYGACC_COMM_IF_PUTC(*xyz.__chan, ACK);
- ZM_DEBUG(zm_dprintf("FINAL ACK (%d)\n", __LINE__));
- }
- xyz.at_eof = true;
- break;
- }
- CYGACC_COMM_IF_PUTC(*xyz.__chan, (xyz.crc_mode ? 'C' : NAK));
- xyz.total_retries++;
- ZM_DEBUG(zm_dprintf("NAK (%d)\n", __LINE__));
- }
- if (stat < 0) {
- *err = stat;
- xyz.len = -1;
- return total;
- }
- }
- /* Don't "read" data from the EOF protocol package */
- if (!xyz.at_eof) {
- len = xyz.len;
- if (size < len) len = size;
- memcpy(buf, xyz.bufp, len);
- size -= len;
- buf += len;
- total += len;
- xyz.len -= len;
- xyz.bufp += len;
- }
+ break;
+ }
+ else if (xyz.blk == ((xyz.next_blk - 1) & 0xFF))
+ {
+ /* Just re-ACK this so sender will get on with it */
+ CYGACC_COMM_IF_PUTC (*xyz.__chan, ACK);
+ continue; /* Need new header */
+ }
+ else
+ {
+ stat = xyzModem_sequence;
+ }
+ }
+ if (stat == xyzModem_cancel)
+ {
+ break;
+ }
+ if (stat == xyzModem_eof)
+ {
+ CYGACC_COMM_IF_PUTC (*xyz.__chan, ACK);
+ ZM_DEBUG (zm_dprintf ("ACK (%d)\n", __LINE__));
+ if (xyz.mode == xyzModem_ymodem)
+ {
+ CYGACC_COMM_IF_PUTC (*xyz.__chan,
+ (xyz.crc_mode ? 'C' : NAK));
+ xyz.total_retries++;
+ ZM_DEBUG (zm_dprintf ("Reading Final Header\n"));
+ stat = xyzModem_get_hdr ();
+ CYGACC_COMM_IF_PUTC (*xyz.__chan, ACK);
+ ZM_DEBUG (zm_dprintf ("FINAL ACK (%d)\n", __LINE__));
+ }
+ xyz.at_eof = true;
+ break;
+ }
+ CYGACC_COMM_IF_PUTC (*xyz.__chan, (xyz.crc_mode ? 'C' : NAK));
+ xyz.total_retries++;
+ ZM_DEBUG (zm_dprintf ("NAK (%d)\n", __LINE__));
+ }
+ if (stat < 0)
+ {
+ *err = stat;
+ xyz.len = -1;
+ return total;
+ }
+ }
+ /* Don't "read" data from the EOF protocol package */
+ if (!xyz.at_eof)
+ {
+ len = xyz.len;
+ if (size < len)
+ len = size;
+ memcpy (buf, xyz.bufp, len);
+ size -= len;
+ buf += len;
+ total += len;
+ xyz.len -= len;
+ xyz.bufp += len;
+ }
}
- return total;
+ return total;
}
void
-xyzModem_stream_close(int *err)
+xyzModem_stream_close (int *err)
{
- diag_printf("xyzModem - %s mode, %d(SOH)/%d(STX)/%d(CAN) packets, %d retries\n",
- xyz.crc_mode ? "CRC" : "Cksum",
- xyz.total_SOH, xyz.total_STX, xyz.total_CAN,
- xyz.total_retries);
- ZM_DEBUG(zm_flush());
+ diag_printf
+ ("xyzModem - %s mode, %d(SOH)/%d(STX)/%d(CAN) packets, %d retries\n",
+ xyz.crc_mode ? "CRC" : "Cksum", xyz.total_SOH, xyz.total_STX,
+ xyz.total_CAN, xyz.total_retries);
+ ZM_DEBUG (zm_flush ());
}
/* Need to be able to clean out the input buffer, so have to take the */
/* getc */
-void xyzModem_stream_terminate(bool abort, int (*getc)(void))
+void
+xyzModem_stream_terminate (bool abort, int (*getc) (void))
{
int c;
- if (abort) {
- ZM_DEBUG(zm_dprintf("!!!! TRANSFER ABORT !!!!\n"));
- switch (xyz.mode) {
+ if (abort)
+ {
+ ZM_DEBUG (zm_dprintf ("!!!! TRANSFER ABORT !!!!\n"));
+ switch (xyz.mode)
+ {
case xyzModem_xmodem:
case xyzModem_ymodem:
/* The X/YMODEM Spec seems to suggest that multiple CAN followed by an equal */
/* number of Backspaces is a friendly way to get the other end to abort. */
- CYGACC_COMM_IF_PUTC(*xyz.__chan,CAN);
- CYGACC_COMM_IF_PUTC(*xyz.__chan,CAN);
- CYGACC_COMM_IF_PUTC(*xyz.__chan,CAN);
- CYGACC_COMM_IF_PUTC(*xyz.__chan,CAN);
- CYGACC_COMM_IF_PUTC(*xyz.__chan,BSP);
- CYGACC_COMM_IF_PUTC(*xyz.__chan,BSP);
- CYGACC_COMM_IF_PUTC(*xyz.__chan,BSP);
- CYGACC_COMM_IF_PUTC(*xyz.__chan,BSP);
+ CYGACC_COMM_IF_PUTC (*xyz.__chan, CAN);
+ CYGACC_COMM_IF_PUTC (*xyz.__chan, CAN);
+ CYGACC_COMM_IF_PUTC (*xyz.__chan, CAN);
+ CYGACC_COMM_IF_PUTC (*xyz.__chan, CAN);
+ CYGACC_COMM_IF_PUTC (*xyz.__chan, BSP);
+ CYGACC_COMM_IF_PUTC (*xyz.__chan, BSP);
+ CYGACC_COMM_IF_PUTC (*xyz.__chan, BSP);
+ CYGACC_COMM_IF_PUTC (*xyz.__chan, BSP);
/* Now consume the rest of what's waiting on the line. */
- ZM_DEBUG(zm_dprintf("Flushing serial line.\n"));
- xyzModem_flush();
- xyz.at_eof = true;
- break;
+ ZM_DEBUG (zm_dprintf ("Flushing serial line.\n"));
+ xyzModem_flush ();
+ xyz.at_eof = true;
+ break;
#ifdef xyzModem_zmodem
case xyzModem_zmodem:
/* Might support it some day I suppose. */
#endif
- break;
- }
- } else {
- ZM_DEBUG(zm_dprintf("Engaging cleanup mode...\n"));
+ break;
+ }
+ }
+ else
+ {
+ ZM_DEBUG (zm_dprintf ("Engaging cleanup mode...\n"));
/*
* Consume any trailing crap left in the inbuffer from
* previous recieved blocks. Since very few files are an exact multiple
* of the transfer block size, there will almost always be some gunk here.
* If we don't eat it now, RedBoot will think the user typed it.
*/
- ZM_DEBUG(zm_dprintf("Trailing gunk:\n"));
- while ((c = (*getc)()) > -1) ;
- ZM_DEBUG(zm_dprintf("\n"));
+ ZM_DEBUG (zm_dprintf ("Trailing gunk:\n"));
+ while ((c = (*getc) ()) > -1);
+ ZM_DEBUG (zm_dprintf ("\n"));
/*
* Make a small delay to give terminal programs like minicom
* time to get control again after their file transfer program
* exits.
*/
- CYGACC_CALL_IF_DELAY_US((cyg_int32)250000);
- }
+ CYGACC_CALL_IF_DELAY_US ((cyg_int32) 250000);
+ }
}
char *
-xyzModem_error(int err)
+xyzModem_error (int err)
{
- switch (err) {
+ switch (err)
+ {
case xyzModem_access:
- return "Can't access file";
- break;
+ return "Can't access file";
+ break;
case xyzModem_noZmodem:
- return "Sorry, zModem not available yet";
- break;
+ return "Sorry, zModem not available yet";
+ break;
case xyzModem_timeout:
- return "Timed out";
- break;
+ return "Timed out";
+ break;
case xyzModem_eof:
- return "End of file";
- break;
+ return "End of file";
+ break;
case xyzModem_cancel:
- return "Cancelled";
- break;
+ return "Cancelled";
+ break;
case xyzModem_frame:
- return "Invalid framing";
- break;
+ return "Invalid framing";
+ break;
case xyzModem_cksum:
- return "CRC/checksum error";
- break;
+ return "CRC/checksum error";
+ break;
case xyzModem_sequence:
- return "Block sequence error";
- break;
+ return "Block sequence error";
+ break;
default:
- return "Unknown error";
- break;
+ return "Unknown error";
+ break;
}
}
/*
* RedBoot interface
*/
-#if 0 /* SB */
-GETC_IO_FUNCS(xyzModem_io, xyzModem_stream_open, xyzModem_stream_close,
- xyzModem_stream_terminate, xyzModem_stream_read, xyzModem_error);
-RedBoot_load(xmodem, xyzModem_io, false, false, xyzModem_xmodem);
-RedBoot_load(ymodem, xyzModem_io, false, false, xyzModem_ymodem);
+#if 0 /* SB */
+GETC_IO_FUNCS (xyzModem_io, xyzModem_stream_open, xyzModem_stream_close,
+ xyzModem_stream_terminate, xyzModem_stream_read,
+ xyzModem_error);
+RedBoot_load (xmodem, xyzModem_io, false, false, xyzModem_xmodem);
+RedBoot_load (ymodem, xyzModem_io, false, false, xyzModem_ymodem);
#endif
diff --git a/config.mk b/config.mk
index b59667a..d32f51e 100644
--- a/config.mk
+++ b/config.mk
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,6 +23,22 @@
#########################################################################
+ifneq ($(OBJTREE),$(SRCTREE))
+ifeq ($(CURDIR),$(SRCTREE))
+dir :=
+else
+dir := $(subst $(SRCTREE)/,,$(CURDIR))
+endif
+
+obj := $(if $(dir),$(OBJTREE)/$(dir)/,$(OBJTREE)/)
+src := $(if $(dir),$(SRCTREE)/$(dir)/,$(SRCTREE)/)
+
+$(shell mkdir -p $(obj))
+else
+obj :=
+src :=
+endif
+
# clean the slate ...
PLATFORM_RELFLAGS =
PLATFORM_CPPFLAGS =
@@ -111,22 +127,32 @@
OBJDUMP = $(CROSS_COMPILE)objdump
RANLIB = $(CROSS_COMPILE)RANLIB
+ARFLAGS = crv
RELFLAGS= $(PLATFORM_RELFLAGS)
DBGFLAGS= -g # -DDEBUG
OPTFLAGS= -Os #-fomit-frame-pointer
ifndef LDSCRIPT
#LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot.lds.debug
+ifeq ($(CONFIG_NAND_U_BOOT),y)
+LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot-nand.lds
+else
LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot.lds
endif
+endif
OBJCFLAGS += --gap-fill=0xff
gccincdir := $(shell $(CC) -print-file-name=include)
CPPFLAGS := $(DBGFLAGS) $(OPTFLAGS) $(RELFLAGS) \
-D__KERNEL__ -DTEXT_BASE=$(TEXT_BASE) \
- -I$(TOPDIR)/include \
- -fno-builtin -ffreestanding -nostdinc -isystem \
- $(gccincdir) -pipe $(PLATFORM_CPPFLAGS)
+
+ifneq ($(OBJTREE),$(SRCTREE))
+CPPFLAGS += -I$(OBJTREE)/include2 -I$(OBJTREE)/include
+endif
+
+CPPFLAGS += -I$(TOPDIR)/include
+CPPFLAGS += -fno-builtin -ffreestanding -nostdinc \
+ -isystem $(gccincdir) -pipe $(PLATFORM_CPPFLAGS)
ifdef BUILD_TAG
CFLAGS := $(CPPFLAGS) -Wall -Wstrict-prototypes \
@@ -192,11 +218,23 @@
#########################################################################
+ifndef REMOTE_BUILD
+
%.s: %.S
- $(CPP) $(AFLAGS) -o $@ $(CURDIR)/$<
+ $(CPP) $(AFLAGS) -o $@ $<
%.o: %.S
- $(CC) $(AFLAGS) -c -o $@ $(CURDIR)/$<
+ $(CC) $(AFLAGS) -c -o $@ $<
%.o: %.c
$(CC) $(CFLAGS) -c -o $@ $<
+else
+
+$(obj)%.s: %.S
+ $(CPP) $(AFLAGS) -o $@ $<
+$(obj)%.o: %.S
+ $(CC) $(AFLAGS) -c -o $@ $<
+$(obj)%.o: %.c
+ $(CC) $(CFLAGS) -c -o $@ $<
+endif
+
#########################################################################
diff --git a/cpu/74xx_7xx/Makefile b/cpu/74xx_7xx/Makefile
index 0e10d3a..fe905f3 100644
--- a/cpu/74xx_7xx/Makefile
+++ b/cpu/74xx_7xx/Makefile
@@ -1,4 +1,7 @@
#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
# (C) Copyright 2001
# Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
#
@@ -23,22 +26,26 @@
include $(TOPDIR)/config.mk
-LIB = lib$(CPU).a
+LIB = $(obj)lib$(CPU).a
START = start.o
-ASOBJS = cache.o kgdb.o io.o
-OBJS = traps.o cpu.o cpu_init.o speed.o interrupts.o
+SOBJS = cache.o kgdb.o io.o
+COBJS = traps.o cpu.o cpu_init.o speed.o interrupts.o
-all: .depend $(START) $(ASOBJS) $(LIB)
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+START := $(addprefix $(obj),$(START))
+
+all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
- $(AR) crv $@ $(ASOBJS) $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(START:.o=.S) $(ASOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/cpu/arm1136/Makefile b/cpu/arm1136/Makefile
index 203278e..d5ac7d3 100644
--- a/cpu/arm1136/Makefile
+++ b/cpu/arm1136/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2003
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,21 +23,25 @@
include $(TOPDIR)/config.mk
-LIB = lib$(CPU).a
+LIB = $(obj)lib$(CPU).a
START = start.o
-OBJS = interrupts.o cpu.o
+COBJS = interrupts.o cpu.o
-all: .depend $(START) $(LIB)
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS))
+START := $(addprefix $(obj),$(START))
+
+all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
- $(AR) crv $@ $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/cpu/arm720t/Makefile b/cpu/arm720t/Makefile
index f273d92..c97f329 100644
--- a/cpu/arm720t/Makefile
+++ b/cpu/arm720t/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,21 +23,25 @@
include $(TOPDIR)/config.mk
-LIB = lib$(CPU).a
+LIB = $(obj)lib$(CPU).a
START = start.o
-OBJS = serial.o serial_netarm.o interrupts.o cpu.o
+COBJS = serial.o serial_netarm.o interrupts.o cpu.o
-all: .depend $(START) $(LIB)
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS))
+START := $(addprefix $(obj),$(START))
+
+all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
- $(AR) crv $@ $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/cpu/arm920t/Makefile b/cpu/arm920t/Makefile
index 8f256e9..e02bc6a 100644
--- a/cpu/arm920t/Makefile
+++ b/cpu/arm920t/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000, 2001, 2002
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,21 +23,25 @@
include $(TOPDIR)/config.mk
-LIB = lib$(CPU).a
+LIB = $(obj)lib$(CPU).a
START = start.o
-OBJS = cpu.o interrupts.o
+COBJS = cpu.o interrupts.o
-all: .depend $(START) $(LIB)
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS))
+START := $(addprefix $(obj),$(START))
+
+all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
- $(AR) crv $@ $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/cpu/arm920t/at91rm9200/Makefile b/cpu/arm920t/at91rm9200/Makefile
index aec9cb6..8d4e478 100644
--- a/cpu/arm920t/at91rm9200/Makefile
+++ b/cpu/arm920t/at91rm9200/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2005
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,22 +23,25 @@
include $(TOPDIR)/config.mk
-LIB = lib$(SOC).a
+LIB = $(obj)lib$(SOC).a
-OBJS = bcm5221.o dm9161.o ether.o i2c.o interrupts.o \
+COBJS = bcm5221.o dm9161.o ether.o i2c.o interrupts.o \
lxt972.o serial.o usb_ohci.o
SOBJS = lowlevel_init.o
-all: .depend $(LIB)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS) $(SOBJS)
+all: $(obj).depend $(LIB)
+
+$(LIB): $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/cpu/arm920t/imx/Makefile b/cpu/arm920t/imx/Makefile
index 8865f82..9207ec1 100644
--- a/cpu/arm920t/imx/Makefile
+++ b/cpu/arm920t/imx/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000, 2001, 2002
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,20 +23,23 @@
include $(TOPDIR)/config.mk
-LIB = lib$(SOC).a
+LIB = $(obj)lib$(SOC).a
-OBJS = generic.o interrupts.o serial.o speed.o
+COBJS = generic.o interrupts.o serial.o speed.o
-all: .depend $(LIB)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+
+all: $(obj).depend $(LIB)
$(LIB): $(OBJS)
- $(AR) crv $@ $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/cpu/arm920t/ks8695/Makefile b/cpu/arm920t/ks8695/Makefile
index ac49060..7db9473 100644
--- a/cpu/arm920t/ks8695/Makefile
+++ b/cpu/arm920t/ks8695/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2005
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,21 +23,24 @@
include $(TOPDIR)/config.mk
-LIB = lib$(SOC).a
+LIB = $(obj)lib$(SOC).a
-OBJS = interrupts.o serial.o
+COBJS = interrupts.o serial.o
SOBJS = lowlevel_init.o
-all: .depend $(LIB)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS) $(SOBJS)
+all: $(obj).depend $(LIB)
+
+$(LIB): $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/cpu/arm920t/s3c24x0/Makefile b/cpu/arm920t/s3c24x0/Makefile
index af9e4ef..3a7c4b3 100644
--- a/cpu/arm920t/s3c24x0/Makefile
+++ b/cpu/arm920t/s3c24x0/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000, 2001, 2002
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,21 +23,24 @@
include $(TOPDIR)/config.mk
-LIB = lib$(SOC).a
+LIB = $(obj)lib$(SOC).a
-OBJS = i2c.o interrupts.o serial.o speed.o \
+COBJS = i2c.o interrupts.o serial.o speed.o \
usb_ohci.o
-all: .depend $(LIB)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+
+all: $(obj).depend $(LIB)
$(LIB): $(OBJS)
- $(AR) crv $@ $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/cpu/arm925t/Makefile b/cpu/arm925t/Makefile
index a1db818..0d4912c 100644
--- a/cpu/arm925t/Makefile
+++ b/cpu/arm925t/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2003
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,21 +23,25 @@
include $(TOPDIR)/config.mk
-LIB = lib$(CPU).a
+LIB = $(obj)lib$(CPU).a
START = start.o
-OBJS = interrupts.o cpu.o omap925.o
+COBJS = interrupts.o cpu.o omap925.o
-all: .depend $(START) $(LIB)
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+START := $(addprefix $(obj),$(START))
+
+all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
- $(AR) crv $@ $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/cpu/arm926ejs/Makefile b/cpu/arm926ejs/Makefile
index 060fd20..0facce4 100644
--- a/cpu/arm926ejs/Makefile
+++ b/cpu/arm926ejs/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2003
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,21 +23,25 @@
include $(TOPDIR)/config.mk
-LIB = lib$(CPU).a
+LIB = $(obj)lib$(CPU).a
START = start.o
-OBJS = interrupts.o cpu.o cpuinfo.o
+COBJS = interrupts.o cpu.o cpuinfo.o
-all: .depend $(START) $(LIB)
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS))
+START := $(addprefix $(obj),$(START))
+
+all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
- $(AR) crv $@ $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/cpu/arm926ejs/omap/Makefile b/cpu/arm926ejs/omap/Makefile
index f9d3378..c335d5c 100644
--- a/cpu/arm926ejs/omap/Makefile
+++ b/cpu/arm926ejs/omap/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2005
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,21 +23,25 @@
include $(TOPDIR)/config.mk
-LIB = lib$(SOC).a
+LIB = $(obj)lib$(SOC).a
-OBJS = timer.o
+COBJS = timer.o
SOBJS = reset.o
-all: .depend $(LIB)
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS))
+START := $(addprefix $(obj),$(START))
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS) $(SOBJS)
+all: $(obj).depend $(LIB)
+
+$(LIB): $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/cpu/arm926ejs/versatile/Makefile b/cpu/arm926ejs/versatile/Makefile
index f9d3378..c335d5c 100644
--- a/cpu/arm926ejs/versatile/Makefile
+++ b/cpu/arm926ejs/versatile/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2005
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,21 +23,25 @@
include $(TOPDIR)/config.mk
-LIB = lib$(SOC).a
+LIB = $(obj)lib$(SOC).a
-OBJS = timer.o
+COBJS = timer.o
SOBJS = reset.o
-all: .depend $(LIB)
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS))
+START := $(addprefix $(obj),$(START))
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS) $(SOBJS)
+all: $(obj).depend $(LIB)
+
+$(LIB): $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/cpu/arm946es/Makefile b/cpu/arm946es/Makefile
index 203278e..d5ac7d3 100644
--- a/cpu/arm946es/Makefile
+++ b/cpu/arm946es/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2003
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,21 +23,25 @@
include $(TOPDIR)/config.mk
-LIB = lib$(CPU).a
+LIB = $(obj)lib$(CPU).a
START = start.o
-OBJS = interrupts.o cpu.o
+COBJS = interrupts.o cpu.o
-all: .depend $(START) $(LIB)
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS))
+START := $(addprefix $(obj),$(START))
+
+all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
- $(AR) crv $@ $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/cpu/arm_intcm/Makefile b/cpu/arm_intcm/Makefile
index 203278e..d5ac7d3 100644
--- a/cpu/arm_intcm/Makefile
+++ b/cpu/arm_intcm/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2003
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,21 +23,25 @@
include $(TOPDIR)/config.mk
-LIB = lib$(CPU).a
+LIB = $(obj)lib$(CPU).a
START = start.o
-OBJS = interrupts.o cpu.o
+COBJS = interrupts.o cpu.o
-all: .depend $(START) $(LIB)
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS))
+START := $(addprefix $(obj),$(START))
+
+all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
- $(AR) crv $@ $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/cpu/bf533/Makefile b/cpu/bf533/Makefile
index c63a8f6..9f4a0d8 100644
--- a/cpu/bf533/Makefile
+++ b/cpu/bf533/Makefile
@@ -2,7 +2,7 @@
#
# Copyright (c) 2005 blackfin.uclinux.org
#
-# (C) Copyright 2000-2004
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -26,21 +26,25 @@
include $(TOPDIR)/config.mk
-LIB = lib$(CPU).a
+LIB = $(obj)lib$(CPU).a
START = start.o start1.o interrupt.o cache.o cplbhdlr.o cplbmgr.o flush.o
-OBJS = cpu.o traps.o ints.o serial.o interrupts.o
+COBJS = cpu.o traps.o ints.o serial.o interrupts.o
-all: .depend $(START) $(LIB)
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+START := $(addprefix $(obj),$(START))
+
+all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
- $(AR) crv $@ $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/cpu/i386/Makefile b/cpu/i386/Makefile
index c44412a..50534b6 100644
--- a/cpu/i386/Makefile
+++ b/cpu/i386/Makefile
@@ -1,4 +1,7 @@
#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
# (C) Copyright 2002
# Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
#
@@ -23,22 +26,26 @@
include $(TOPDIR)/config.mk
-LIB = lib$(CPU).a
+LIB = $(obj)lib$(CPU).a
START = start.o start16.o reset.o
COBJS = serial.o interrupts.o cpu.o timer.o sc520.o
-AOBJS = sc520_asm.o
+SOBJS = sc520_asm.o
-all: .depend $(START) $(LIB)
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+START := $(addprefix $(obj),$(START))
-$(LIB): $(COBJS) $(AOBJS)
- $(AR) crv $@ $(COBJS) $(AOBJS)
+all: $(obj).depend $(START) $(LIB)
+
+$(LIB): $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(START:.o=.S) $(COBJS:.o=.c) $(AOBJS:.o=.S)
- $(CC) -M $(CFLAGS) $(START:.o=.S) $(COBJS:.o=.c) $(AOBJS:.o=.S) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/cpu/i386/sc520.c b/cpu/i386/sc520.c
index 1c4370b..d0a7341 100644
--- a/cpu/i386/sc520.c
+++ b/cpu/i386/sc520.c
@@ -149,7 +149,7 @@
/* these memory control registers are set up in the assember part,
* in sc520_asm.S, during 'mem_init'. If we muck with them here,
* after we are running a stack in RAM, we have troubles. Besides,
- * these refresh and delay values are better ? simply specified
+ * these refresh and delay values are better ? simply specified
* outright in the include/configs/{cfg} file since the HW designer
* simply dictates it.
*/
diff --git a/cpu/i386/sc520_asm.S b/cpu/i386/sc520_asm.S
index e1fa37a..8fc713d 100644
--- a/cpu/i386/sc520_asm.S
+++ b/cpu/i386/sc520_asm.S
@@ -462,7 +462,7 @@
#if defined CFG_SDRAM_DRCTMCTL
/* just have your hardware desinger _GIVE_ you what you need here! */
- movl $DRCTMCTL, %edi
+ movl $DRCTMCTL, %edi
movb $CFG_SDRAM_DRCTMCTL,%al
movb (%edi), %al
#else
@@ -477,7 +477,7 @@
#ifdef CFG_SDRAM_CAS_LATENCY_3T
orb $0x10, %al
#endif
- movb %al, (%edi)
+ movb %al, (%edi)
#endif
#endif
movl $DRCCTL, %edi /* DRAM Control register */
@@ -537,7 +537,7 @@
movl %eax, %ebx
-done:
+done:
movl %ebx, %eax
#if CFG_SDRAM_ECC_ENABLE
@@ -547,7 +547,7 @@
movl $0x1, %edi
memtest0:
movb $0xa5, (%edi)
- cmpb $0xa5, (%edi)
+ cmpb $0xa5, (%edi)
jne out
shrl $1, %ecx
andl %ecx,%ecx
@@ -571,11 +571,11 @@
/* enable NMI mapping for ECC */
movl $ECCINT, %edi
mov $0x10, %al
- movb %al, (%edi)
+ movb %al, (%edi)
/* Turn on ECC */
movl $ECCCTL, %edi
mov $0x05, %al
- movb %al, (%edi)
+ movb %al, (%edi)
#endif
out:
movl %ebx, %eax
diff --git a/cpu/ixp/Makefile b/cpu/ixp/Makefile
index ba2e589..e1fb327 100644
--- a/cpu/ixp/Makefile
+++ b/cpu/ixp/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000, 2002
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,21 +23,25 @@
include $(TOPDIR)/config.mk
-LIB = lib$(CPU).a
+LIB = $(obj)lib$(CPU).a
START = start.o
-OBJS = serial.o interrupts.o cpu.o timer.o pci.o
+COBJS = serial.o interrupts.o cpu.o timer.o pci.o
-all: .depend $(START) $(LIB)
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+START := $(addprefix $(obj),$(START))
+
+all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
- $(AR) crv $@ $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/cpu/ixp/npe/Makefile b/cpu/ixp/npe/Makefile
index 937de9d..4de34fd 100644
--- a/cpu/ixp/npe/Makefile
+++ b/cpu/ixp/npe/Makefile
@@ -23,11 +23,13 @@
include $(TOPDIR)/config.mk
-LIB := libnpe.a
+LIB := $(obj)libnpe.a
-CFLAGS += -I$(TOPDIR)/cpu/ixp/npe/include -DCONFIG_IXP425_COMPONENT_ETHDB
+LOCAL_CFLAGS += -I$(TOPDIR)/cpu/ixp/npe/include -DCONFIG_IXP425_COMPONENT_ETHDB
+CFLAGS += $(LOCAL_CFLAGS)
+HOST_CFLAGS += $(LOCAL_CFLAGS)
-OBJS := npe.o \
+COBJS := npe.o \
miiphy.o \
IxOsalBufferMgt.o \
IxOsalIoMem.o \
@@ -78,14 +80,21 @@
IxNpeMhSolicitedCbMgr.o \
IxNpeMhUnsolicitedCbMgr.o
+
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+START := $(addprefix $(obj),$(START))
+
all: $(LIB)
-$(LIB): $(OBJS)
- $(AR) crv $@ $(OBJS)
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/cpu/lh7a40x/Makefile b/cpu/lh7a40x/Makefile
index b45bd6a..bac2a64 100644
--- a/cpu/lh7a40x/Makefile
+++ b/cpu/lh7a40x/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000, 2001, 2002
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,21 +23,25 @@
include $(TOPDIR)/config.mk
-LIB = lib$(CPU).a
+LIB = $(obj)lib$(CPU).a
START = start.o
-OBJS = cpu.o speed.o interrupts.o serial.o
+COBJS = cpu.o speed.o interrupts.o serial.o
-all: .depend $(START) $(LIB)
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+START := $(addprefix $(obj),$(START))
+
+all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
- $(AR) crv $@ $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/cpu/mcf52x2/Makefile b/cpu/mcf52x2/Makefile
index 879deb7..70d57cf 100644
--- a/cpu/mcf52x2/Makefile
+++ b/cpu/mcf52x2/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2004
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -25,21 +25,25 @@
# CFLAGS += -DET_DEBUG
-LIB = lib$(CPU).a
+LIB = $(obj)lib$(CPU).a
START =
-OBJS = serial.o interrupts.o cpu.o speed.o cpu_init.o fec.o
+COBJS = serial.o interrupts.o cpu.o speed.o cpu_init.o fec.o
-all: .depend $(START) $(LIB)
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+START := $(addprefix $(obj),$(START))
+
+all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
- $(AR) crv $@ $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/cpu/mcf52x2/fec.c b/cpu/mcf52x2/fec.c
index 6db6214..b6540b5 100644
--- a/cpu/mcf52x2/fec.c
+++ b/cpu/mcf52x2/fec.c
@@ -267,6 +267,7 @@
fecp->fec_hash_table_high = 0;
fecp->fec_hash_table_low = 0;
#endif
+#endif
/* Set maximum receive buffer size.
*/
diff --git a/cpu/mcf52x2/start.S b/cpu/mcf52x2/start.S
index 8a83ca5..f1f4077 100644
--- a/cpu/mcf52x2/start.S
+++ b/cpu/mcf52x2/start.S
@@ -140,6 +140,7 @@
move.l #(CFG_MBAR + 1), %d0 /* set IPSBAR address + valid flag */
move.l %d0, 0x40000000
+#if defined(CONFIG_M5282)
/* Initialize RAMBAR1: locate SRAM and validate it */
move.l #(CFG_INIT_RAM_ADDR + 0x21), %d0
movec %d0, %RAMBAR1
@@ -171,6 +172,7 @@
#endif /* (TEXT_BASE == CFG_INT_FLASH_BASE) */
#endif
+#endif
/* if we come from a pre-loader we have no exception table and
* therefore no VBR to set
*/
diff --git a/cpu/microblaze/Makefile b/cpu/microblaze/Makefile
index 610043e..fd54425 100644
--- a/cpu/microblaze/Makefile
+++ b/cpu/microblaze/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,21 +23,25 @@
include $(TOPDIR)/config.mk
-LIB = lib$(CPU).a
+LIB = $(obj)lib$(CPU).a
START = start.o
-OBJS = cpu.o interrupts.o
+COBJS = cpu.o interrupts.o
-all: .depend $(START) $(LIB)
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+START := $(addprefix $(obj),$(START))
+
+all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
- $(AR) crv $@ $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c) $(AOBJS:.o=.S)
- $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) $(AOBJS:.o=.S) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/cpu/mips/Makefile b/cpu/mips/Makefile
index c8b30c7..92dcc16 100644
--- a/cpu/mips/Makefile
+++ b/cpu/mips/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2003
+# (C) Copyright 2003-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,23 +23,27 @@
include $(TOPDIR)/config.mk
-LIB = lib$(CPU).a
+LIB = $(obj)lib$(CPU).a
START = start.o
-OBJS = asc_serial.o au1x00_serial.o au1x00_eth.o au1x00_usb_ohci.o \
+COBJS = asc_serial.o au1x00_serial.o au1x00_eth.o au1x00_usb_ohci.o \
cpu.o interrupts.o incaip_clock.o
SOBJS = incaip_wdt.o cache.o
-all: .depend $(START) $(LIB)
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+START := $(addprefix $(obj),$(START))
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS) $(SOBJS)
+all: $(obj).depend $(START) $(LIB)
+
+$(LIB): $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/cpu/mpc5xx/Makefile b/cpu/mpc5xx/Makefile
index b787b61..8aab018 100644
--- a/cpu/mpc5xx/Makefile
+++ b/cpu/mpc5xx/Makefile
@@ -1,4 +1,7 @@
#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
# (C) Copyright 2003
# Martin Winistoerfer, martinwinistoerfer@gmx.ch.
#
@@ -32,21 +35,25 @@
include $(TOPDIR)/config.mk
-LIB = lib$(CPU).a
+LIB = $(obj)lib$(CPU).a
-START = start.S
-OBJS = serial.o cpu.o cpu_init.o interrupts.o traps.o speed.o spi.o
+START = start.o
+COBJS = serial.o cpu.o cpu_init.o interrupts.o traps.o speed.o spi.o
-all: .depend $(START) $(LIB)
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+START := $(addprefix $(obj),$(START))
+
+all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
- $(AR) crv $@ $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/cpu/mpc5xxx/Makefile b/cpu/mpc5xxx/Makefile
index a97b625..235adb7 100644
--- a/cpu/mpc5xxx/Makefile
+++ b/cpu/mpc5xxx/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2003
+# (C) Copyright 2003-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,23 +23,27 @@
include $(TOPDIR)/config.mk
-LIB = lib$(CPU).a
+LIB = $(obj)lib$(CPU).a
START = start.o
-ASOBJS = io.o firmware_sc_task_bestcomm.impl.o firmware_sc_task.impl.o
-OBJS = i2c.o traps.o cpu.o cpu_init.o fec.o ide.o interrupts.o \
+SOBJS = io.o firmware_sc_task_bestcomm.impl.o firmware_sc_task.impl.o
+COBJS = i2c.o traps.o cpu.o cpu_init.o fec.o ide.o interrupts.o \
loadtask.o pci_mpc5200.o serial.o speed.o usb_ohci.o
-all: .depend $(START) $(ASOBJS) $(LIB)
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+START := $(addprefix $(obj),$(START))
+
+all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
- $(AR) crv $@ $(ASOBJS) $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(START:.o=.S) $(ASOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/cpu/mpc5xxx/interrupts.c b/cpu/mpc5xxx/interrupts.c
index 7bacecd..beeb222 100644
--- a/cpu/mpc5xxx/interrupts.c
+++ b/cpu/mpc5xxx/interrupts.c
@@ -1,4 +1,7 @@
/*
+ * (C) Copyright 2006
+ * Detlev Zundel, DENX Software Engineering, dzu@denx.de
+ *
* (C) Copyright -2003
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
@@ -24,18 +27,212 @@
* MA 02111-1307 USA
*/
-/*
- * interrupts.c - just enough support for the decrementer/timer
+/* this section was ripped out of arch/ppc/syslib/mpc52xx_pic.c in the
+ * Linux 2.6 source with the following copyright.
+ *
+ * Based on (well, mostly copied from) the code from the 2.4 kernel by
+ * Dale Farnsworth <dfarnsworth@mvista.com> and Kent Borg.
+ *
+ * Copyright (C) 2004 Sylvain Munaut <tnt@246tNt.com>
+ * Copyright (C) 2003 Montavista Software, Inc
*/
#include <common.h>
#include <asm/processor.h>
+#include <asm/io.h>
#include <command.h>
+struct irq_action {
+ interrupt_handler_t *handler;
+ void *arg;
+ ulong count;
+};
+
+static struct irq_action irq_handlers[NR_IRQS];
+
+static struct mpc5xxx_intr *intr;
+static struct mpc5xxx_sdma *sdma;
+
+static void mpc5xxx_ic_disable(unsigned int irq)
+{
+ u32 val;
+
+ if (irq == MPC5XXX_IRQ0) {
+ val = in_be32(&intr->ctrl);
+ val &= ~(1 << 11);
+ out_be32(&intr->ctrl, val);
+ } else if (irq < MPC5XXX_IRQ1) {
+ BUG();
+ } else if (irq <= MPC5XXX_IRQ3) {
+ val = in_be32(&intr->ctrl);
+ val &= ~(1 << (10 - (irq - MPC5XXX_IRQ1)));
+ out_be32(&intr->ctrl, val);
+ } else if (irq < MPC5XXX_SDMA_IRQ_BASE) {
+ val = in_be32(&intr->main_mask);
+ val |= 1 << (16 - (irq - MPC5XXX_MAIN_IRQ_BASE));
+ out_be32(&intr->main_mask, val);
+ } else if (irq < MPC5XXX_PERP_IRQ_BASE) {
+ val = in_be32(&sdma->IntMask);
+ val |= 1 << (irq - MPC5XXX_SDMA_IRQ_BASE);
+ out_be32(&sdma->IntMask, val);
+ } else {
+ val = in_be32(&intr->per_mask);
+ val |= 1 << (31 - (irq - MPC5XXX_PERP_IRQ_BASE));
+ out_be32(&intr->per_mask, val);
+ }
+}
+
+static void mpc5xxx_ic_enable(unsigned int irq)
+{
+ u32 val;
+
+ if (irq == MPC5XXX_IRQ0) {
+ val = in_be32(&intr->ctrl);
+ val |= 1 << 11;
+ out_be32(&intr->ctrl, val);
+ } else if (irq < MPC5XXX_IRQ1) {
+ BUG();
+ } else if (irq <= MPC5XXX_IRQ3) {
+ val = in_be32(&intr->ctrl);
+ val |= 1 << (10 - (irq - MPC5XXX_IRQ1));
+ out_be32(&intr->ctrl, val);
+ } else if (irq < MPC5XXX_SDMA_IRQ_BASE) {
+ val = in_be32(&intr->main_mask);
+ val &= ~(1 << (16 - (irq - MPC5XXX_MAIN_IRQ_BASE)));
+ out_be32(&intr->main_mask, val);
+ } else if (irq < MPC5XXX_PERP_IRQ_BASE) {
+ val = in_be32(&sdma->IntMask);
+ val &= ~(1 << (irq - MPC5XXX_SDMA_IRQ_BASE));
+ out_be32(&sdma->IntMask, val);
+ } else {
+ val = in_be32(&intr->per_mask);
+ val &= ~(1 << (31 - (irq - MPC5XXX_PERP_IRQ_BASE)));
+ out_be32(&intr->per_mask, val);
+ }
+}
+
+static void mpc5xxx_ic_ack(unsigned int irq)
+{
+ u32 val;
+
+ /*
+ * Only some irqs are reset here, others in interrupting hardware.
+ */
+
+ switch (irq) {
+ case MPC5XXX_IRQ0:
+ val = in_be32(&intr->ctrl);
+ val |= 0x08000000;
+ out_be32(&intr->ctrl, val);
+ break;
+ case MPC5XXX_CCS_IRQ:
+ val = in_be32(&intr->enc_status);
+ val |= 0x00000400;
+ out_be32(&intr->enc_status, val);
+ break;
+ case MPC5XXX_IRQ1:
+ val = in_be32(&intr->ctrl);
+ val |= 0x04000000;
+ out_be32(&intr->ctrl, val);
+ break;
+ case MPC5XXX_IRQ2:
+ val = in_be32(&intr->ctrl);
+ val |= 0x02000000;
+ out_be32(&intr->ctrl, val);
+ break;
+ case MPC5XXX_IRQ3:
+ val = in_be32(&intr->ctrl);
+ val |= 0x01000000;
+ out_be32(&intr->ctrl, val);
+ break;
+ default:
+ if (irq >= MPC5XXX_SDMA_IRQ_BASE
+ && irq < (MPC5XXX_SDMA_IRQ_BASE + MPC5XXX_SDMA_IRQ_NUM)) {
+ out_be32(&sdma->IntPend,
+ 1 << (irq - MPC5XXX_SDMA_IRQ_BASE));
+ }
+ break;
+ }
+}
+
+static void mpc5xxx_ic_disable_and_ack(unsigned int irq)
+{
+ mpc5xxx_ic_disable(irq);
+ mpc5xxx_ic_ack(irq);
+}
+
-int interrupt_init_cpu (ulong *decrementer_count)
+static void mpc5xxx_ic_end(unsigned int irq)
+{
+ mpc5xxx_ic_enable(irq);
+}
+
+void mpc5xxx_init_irq(void)
+{
+ u32 intr_ctrl;
+
+ /* Remap the necessary zones */
+ intr = (struct mpc5xxx_intr *)(MPC5XXX_ICTL);
+ sdma = (struct mpc5xxx_sdma *)(MPC5XXX_SDMA);
+
+ /* Disable all interrupt sources. */
+ out_be32(&sdma->IntPend, 0xffffffff); /* 1 means clear pending */
+ out_be32(&sdma->IntMask, 0xffffffff); /* 1 means disabled */
+ out_be32(&intr->per_mask, 0x7ffffc00); /* 1 means disabled */
+ out_be32(&intr->main_mask, 0x00010fff); /* 1 means disabled */
+ intr_ctrl = in_be32(&intr->ctrl);
+ intr_ctrl |= 0x0f000000 | /* clear IRQ 0-3 */
+ 0x00ff0000 | /* IRQ 0-3 level sensitive low active */
+ 0x00001000 | /* MEE master external enable */
+ 0x00000000 | /* 0 means disable IRQ 0-3 */
+ 0x00000001; /* CEb route critical normally */
+ out_be32(&intr->ctrl, intr_ctrl);
+
+ /* Zero a bunch of the priority settings. */
+ out_be32(&intr->per_pri1, 0);
+ out_be32(&intr->per_pri2, 0);
+ out_be32(&intr->per_pri3, 0);
+ out_be32(&intr->main_pri1, 0);
+ out_be32(&intr->main_pri2, 0);
+}
+
+int mpc5xxx_get_irq(struct pt_regs *regs)
+{
+ u32 status;
+ int irq = -1;
+
+ status = in_be32(&intr->enc_status);
+
+ if (status & 0x00000400) { /* critical */
+ irq = (status >> 8) & 0x3;
+ if (irq == 2) /* high priority peripheral */
+ goto peripheral;
+ irq += MPC5XXX_CRIT_IRQ_BASE;
+ } else if (status & 0x00200000) { /* main */
+ irq = (status >> 16) & 0x1f;
+ if (irq == 4) /* low priority peripheral */
+ goto peripheral;
+ irq += MPC5XXX_MAIN_IRQ_BASE;
+ } else if (status & 0x20000000) { /* peripheral */
+ peripheral:
+ irq = (status >> 24) & 0x1f;
+ if (irq == 0) { /* bestcomm */
+ status = in_be32(&sdma->IntPend);
+ irq = ffs(status) + MPC5XXX_SDMA_IRQ_BASE - 1;
+ } else
+ irq += MPC5XXX_PERP_IRQ_BASE;
+ }
+
+ return irq;
+}
+
+/****************************************************************************/
+
+int interrupt_init_cpu(ulong * decrementer_count)
{
*decrementer_count = get_tbclk() / CFG_HZ;
+ mpc5xxx_init_irq();
+
return (0);
}
@@ -44,14 +241,32 @@
/*
* Handle external interrupts
*/
-void
-external_interrupt(struct pt_regs *regs)
+void external_interrupt(struct pt_regs *regs)
{
- puts("external_interrupt (oops!)\n");
+ int irq, unmask = 1;
+
+ irq = mpc5xxx_get_irq(regs);
+
+ mpc5xxx_ic_disable_and_ack(irq);
+
+ enable_interrupts();
+
+ if (irq_handlers[irq].handler != NULL)
+ (*irq_handlers[irq].handler) (irq_handlers[irq].arg);
+ else {
+ printf("\nBogus External Interrupt IRQ %d\n", irq);
+ /*
+ * turn off the bogus interrupt, otherwise it
+ * might repeat forever
+ */
+ unmask = 0;
+ }
+
+ if (unmask)
+ mpc5xxx_ic_end(irq);
}
-void
-timer_interrupt_cpu (struct pt_regs *regs)
+void timer_interrupt_cpu(struct pt_regs *regs)
{
/* nothing to do here */
return;
@@ -63,22 +278,69 @@
* Install and free a interrupt handler.
*/
-void
-irq_install_handler(int vec, interrupt_handler_t *handler, void *arg)
+void irq_install_handler(int irq, interrupt_handler_t * handler, void *arg)
{
+ if (irq < 0 || irq >= NR_IRQS) {
+ printf("irq_install_handler: bad irq number %d\n", irq);
+ return;
+ }
+ if (irq_handlers[irq].handler != NULL)
+ printf("irq_install_handler: 0x%08lx replacing 0x%08lx\n",
+ (ulong) handler, (ulong) irq_handlers[irq].handler);
+
+ irq_handlers[irq].handler = handler;
+ irq_handlers[irq].arg = arg;
+
+ mpc5xxx_ic_enable(irq);
}
-void
-irq_free_handler(int vec)
+void irq_free_handler(int irq)
{
+ if (irq < 0 || irq >= NR_IRQS) {
+ printf("irq_free_handler: bad irq number %d\n", irq);
+ return;
+ }
+ mpc5xxx_ic_disable(irq);
+
+ irq_handlers[irq].handler = NULL;
+ irq_handlers[irq].arg = NULL;
}
/****************************************************************************/
-void
-do_irqinfo(cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[])
+#if (CONFIG_COMMANDS & CFG_CMD_IRQ)
+void do_irqinfo(cmd_tbl_t * cmdtp, bd_t * bd, int flag, int argc, char *argv[])
{
- puts("IRQ related functions are unimplemented currently.\n");
+ int irq, re_enable;
+ u32 intr_ctrl;
+ char *irq_config[] = { "level sensitive, active high",
+ "edge sensitive, rising active edge",
+ "edge sensitive, falling active edge",
+ "level sensitive, active low"
+ };
+
+ re_enable = disable_interrupts();
+
+ intr_ctrl = in_be32(&intr->ctrl);
+ printf("Interrupt configuration:\n");
+
+ for (irq = 0; irq <= 3; irq++) {
+ printf("IRQ%d: %s\n", irq,
+ irq_config[(intr_ctrl >> (22 - 2 * irq)) & 0x3]);
+ }
+
+ puts("\nInterrupt-Information:\n" "Nr Routine Arg Count\n");
+
+ for (irq = 0; irq < NR_IRQS; irq++)
+ if (irq_handlers[irq].handler != NULL)
+ printf("%02d %08lx %08lx %ld\n", irq,
+ (ulong) irq_handlers[irq].handler,
+ (ulong) irq_handlers[irq].arg,
+ irq_handlers[irq].count);
+
+ if (re_enable)
+ enable_interrupts();
}
+#endif
diff --git a/cpu/mpc5xxx/serial.c b/cpu/mpc5xxx/serial.c
index 6cb523d..430d63f 100644
--- a/cpu/mpc5xxx/serial.c
+++ b/cpu/mpc5xxx/serial.c
@@ -166,6 +166,25 @@
}
#if defined(CONFIG_SERIAL_MULTI)
+void serial_putc_raw_dev(unsigned long dev_base, const char c)
+#else
+void serial_putc_raw(const char c)
+#endif
+{
+#if defined(CONFIG_SERIAL_MULTI)
+ volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)dev_base;
+#else
+ volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE;
+#endif
+ /* Wait for last character to go. */
+ while (!(psc->psc_status & PSC_SR_TXEMP))
+ ;
+
+ psc->psc_buffer_8 = c;
+}
+
+
+#if defined(CONFIG_SERIAL_MULTI)
void serial_puts_dev (unsigned long dev_base, const char *s)
#else
void serial_puts (const char *s)
@@ -240,6 +259,43 @@
}
#if defined(CONFIG_SERIAL_MULTI)
+void serial_setrts_dev (unsigned long dev_base, int s)
+#else
+void serial_setrts(int s)
+#endif
+{
+#if defined(CONFIG_SERIAL_MULTI)
+ volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)dev_base;
+#else
+ volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE;
+#endif
+
+ if (s) {
+ /* Assert RTS (become LOW) */
+ psc->op1 = 0x1;
+ }
+ else {
+ /* Negate RTS (become HIGH) */
+ psc->op0 = 0x1;
+ }
+}
+
+#if defined(CONFIG_SERIAL_MULTI)
+int serial_getcts_dev (unsigned long dev_base)
+#else
+int serial_getcts(void)
+#endif
+{
+#if defined(CONFIG_SERIAL_MULTI)
+ volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)dev_base;
+#else
+ volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE;
+#endif
+
+ return (psc->ip & 0x1) ? 0 : 1;
+}
+
+#if defined(CONFIG_SERIAL_MULTI)
int serial0_init(void)
{
return (serial_init_dev(PSC_BASE));
diff --git a/cpu/mpc8220/Makefile b/cpu/mpc8220/Makefile
index 7c9b6c9..b4fad28 100644
--- a/cpu/mpc8220/Makefile
+++ b/cpu/mpc8220/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2003
+# (C) Copyright 2003-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,24 +23,28 @@
include $(TOPDIR)/config.mk
-LIB = lib$(CPU).a
+LIB = $(obj)lib$(CPU).a
START = start.o
-ASOBJS = io.o fec_dma_tasks.o
-OBJS = cpu.o cpu_init.o dramSetup.o fec.o i2c.o \
+SOBJS = io.o fec_dma_tasks.o
+COBJS = cpu.o cpu_init.o dramSetup.o fec.o i2c.o \
interrupts.o loadtask.o speed.o \
traps.o uart.o pci.o
-all: .depend $(START) $(ASOBJS) $(LIB)
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+START := $(addprefix $(obj),$(START))
+
+all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
- $(AR) crv $@ $(ASOBJS) $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(START:.o=.S) $(ASOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/cpu/mpc8220/pci.c b/cpu/mpc8220/pci.c
index ca4a04d..4ef214e 100644
--- a/cpu/mpc8220/pci.c
+++ b/cpu/mpc8220/pci.c
@@ -170,7 +170,7 @@
hose->region_count = 3;
hose->cfg_addr = &(xcpci->cfg_adr);
- hose->cfg_data = CONFIG_PCI_CFG_BUS;
+ hose->cfg_data = (volatile unsigned char *)CONFIG_PCI_CFG_BUS;
pci_set_ops(hose,
mpc8220_pci_read_config_byte,
diff --git a/cpu/mpc824x/Makefile b/cpu/mpc824x/Makefile
index df0d64e..f249dd7 100644
--- a/cpu/mpc824x/Makefile
+++ b/cpu/mpc824x/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -22,26 +22,35 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)drivers/epic)
+$(shell mkdir -p $(obj)drivers/i2c)
+endif
-LIB = lib$(CPU).a
+LIB = $(obj)lib$(CPU).a
-START = start.S
-OBJS = traps.o cpu.o cpu_init.o interrupts.o speed.o \
- drivers/epic/epic1.o drivers/i2c/i2c.o pci.o bedbug_603e.o
+START = start.o
+COBJS = traps.o cpu.o cpu_init.o interrupts.o speed.o \
+ drivers/epic/epic1.o drivers/i2c/i2c.o pci.o
+COBJS_LN = bedbug_603e.o
-all: .depend $(START) $(LIB)
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) $(addprefix $(obj),$(COBJS_LN:.o=.c))
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS) $(COBJS_LN))
+START := $(addprefix $(obj),$(START))
+
+all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
- $(AR) crv $@ $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
-bedbug_603e.c:
- ln -s ../mpc8260/bedbug_603e.c bedbug_603e.c
+$(obj)bedbug_603e.c:
+ ln -s $(src)../mpc8260/bedbug_603e.c $(obj)bedbug_603e.c
#########################################################################
-.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/cpu/mpc824x/drivers/dma/Makefile b/cpu/mpc824x/drivers/dma/Makefile
deleted file mode 100644
index 59e2fac..0000000
--- a/cpu/mpc824x/drivers/dma/Makefile
+++ /dev/null
@@ -1,83 +0,0 @@
-##########################################################################
-#
-# Copyright Motorola, Inc. 1997
-# ALL RIGHTS RESERVED
-#
-# You are hereby granted a copyright license to use, modify, and
-# distribute the SOFTWARE so long as this entire notice is retained
-# without alteration in any modified and/or redistributed versions,
-# and that such modified versions are clearly identified as such.
-# No licenses are granted by implication, estoppel or otherwise under
-# any patents or trademarks of Motorola, Inc.
-#
-# The SOFTWARE is provided on an "AS IS" basis and without warranty.
-# To the maximum extent permitted by applicable law, MOTOROLA DISCLAIMS
-# ALL WARRANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING IMPLIED
-# WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
-# PURPOSE AND ANY WARRANTY AGAINST INFRINGEMENT WITH
-# REGARD TO THE SOFTWARE (INCLUDING ANY MODIFIED VERSIONS
-# THEREOF) AND ANY ACCOMPANYING WRITTEN MATERIALS.
-#
-# To the maximum extent permitted by applicable law, IN NO EVENT SHALL
-# MOTOROLA BE LIABLE FOR ANY DAMAGES WHATSOEVER
-# (INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF
-# BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS
-# INFORMATION, OR OTHER PECUNIARY LOSS) ARISING OF THE USE OR
-# INABILITY TO USE THE SOFTWARE.
-#
-############################################################################
-TARGET = libdma.a
-
-DEBUG = -DDMADBG
-LST = -Hanno -S
-OPTIM =
-CC = /risc/tools/pkgs/metaware/bin/hcppc
-CFLAGS = -Hnocopyr -c -Hsds -Hon=Char_default_unsigned -Hon=Char_is_rep -I../inc -I/risc/tools/pkgs/metaware/inc
-CCobj = $(CC) $(CFLAGS) $(DEBUG) $(OPTIM)
-PREP = $(CC) $(CFLAGS) -P
-
-# Assembler used to build the .s files (for the board version)
-
-ASOPT = -big_si -c
-ASDEBUG = -l -fm
-AS = /risc/tools/pkgs/metaware/bin/asppc
-
-# Linker to bring .o files together into an executable.
-
-LKOPT = -Bbase=0 -q -r -Qn
-LKCMD =
-LINK = /risc/tools/pkgs/metaware/bin/ldppc $(LKCMD) $(LKOPT)
-
-# DOS Utilities
-
-DEL = rm
-COPY = cp
-LIST = ls
-
-OBJECTS = dma1.o dma2.o
-
-all: $(TARGET)
-
-$(TARGET): $(OBJECTS)
- $(LINK) $(OBJECTS) -o $@
-
-objects: dma1.o
-
-clean:
- $(DEL) -f *.o *.i *.map *.lst $(TARGET) $(OBJECTS)
-
-.s.o:
- $(DEL) -f $*.i
- $(PREP) -Hasmcpp $<
- $(AS) $(ASOPT) $*.i
-# $(AS) $(ASOPT) $(ASDEBUG) $*.i > $*.lst
-
-.c.o:
- $(CCobj) $<
-
-.c.s:
- $(CCobj) $(LST) $<
-
-dma1.o: dma_export.h dma.h dma1.c
-
-dma2.o: dma.h dma2.s
diff --git a/cpu/mpc824x/drivers/dma/Makefile_pc b/cpu/mpc824x/drivers/dma/Makefile_pc
deleted file mode 100644
index 8df2a3c..0000000
--- a/cpu/mpc824x/drivers/dma/Makefile_pc
+++ /dev/null
@@ -1,89 +0,0 @@
-##########################################################################
-#
-# makefile_pc for use with mksnt tools drivers/dma
-#
-# Copyright Motorola, Inc. 1997
-# ALL RIGHTS RESERVED
-#
-# You are hereby granted a copyright license to use, modify, and
-# distribute the SOFTWARE so long as this entire notice is retained
-# without alteration in any modified and/or redistributed versions,
-# and that such modified versions are clearly identified as such.
-# No licenses are granted by implication, estoppel or otherwise under
-# any patents or trademarks of Motorola, Inc.
-#
-# The SOFTWARE is provided on an "AS IS" basis and without warranty.
-# To the maximum extent permitted by applicable law, MOTOROLA DISCLAIMS
-# ALL WARRANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING IMPLIED
-# WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
-# PURPOSE AND ANY WARRANTY AGAINST INFRINGEMENT WITH
-# REGARD TO THE SOFTWARE (INCLUDING ANY MODIFIED VERSIONS
-# THEREOF) AND ANY ACCOMPANYING WRITTEN MATERIALS.
-#
-# To the maximum extent permitted by applicable law, IN NO EVENT SHALL
-# MOTOROLA BE LIABLE FOR ANY DAMAGES WHATSOEVER
-# (INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF
-# BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS
-# INFORMATION, OR OTHER PECUNIARY LOSS) ARISING OF THE USE OR
-# INABILITY TO USE THE SOFTWARE.
-#
-############################################################################
-TARGET = libdma.a
-
-DEBUG = -DDMADBG
-LST = -Hanno -S
-OPTIM =
-CC = m:/old_tools/tools/hcppc/bin/hcppc
-CFLAGS = -Hnocopyr -c -Hsds -Hon=Char_default_unsigned -Hon=Char_is_rep -I../inc -I/risc/tools/pkgs/metaware/inc
-CCobj = $(CC) $(CFLAGS) $(DEBUG) $(OPTIM)
-PREP = $(CC) $(CFLAGS) -P
-
-# Assembler used to build the .s files (for the board version)
-
-ASOPT = -big_si -c
-ASDEBUG = -l -fm
-AS = m:/old_tools/tools/hcppc/bin/asppc
-
-# Linker to bring .o files together into an executable.
-
-LKOPT = -Bbase=0 -q -r -Qn
-LKCMD =
-LINK = m:/old_tools/tools/hcppc/bin/ldppc $(LKCMD) $(LKOPT)
-
-# DOS Utilities
-
-DEL = rm
-COPY = cp
-LIST = ls
-
-OBJECTS = dma1.o dma2.o
-
-all: $(TARGET)
-
-$(TARGET): $(OBJECTS)
- $(LINK) $(OBJECTS) -o $@
-
-objects: dma1.o
-
-clean:
- $(DEL) -f *.o *.i *.map *.lst $(TARGET) $(OBJECTS)
-
-.s.o:
- $(DEL) -f $*.i
- $(PREP) -Hasmcpp $<
- $(AS) $(ASOPT) $*.i
-# $(AS) $(ASOPT) $(ASDEBUG) $*.i > $*.lst
-
-.c.o:
- $(CCobj) $<
-
-.c.s:
- $(CCobj) $(LST) $<
-
-dma1.o: dma_export.h dma.h dma1.c
- $(CCobj) $<
-
-dma2.o: dma.h dma2.s
- $(DEL) -f $*.i
- $(PREP) -Hasmcpp $<
- $(AS) $(ASOPT) $*.i
diff --git a/cpu/mpc824x/drivers/dma/README b/cpu/mpc824x/drivers/dma/README
deleted file mode 100644
index 06f4bc0..0000000
--- a/cpu/mpc824x/drivers/dma/README
+++ /dev/null
@@ -1,100 +0,0 @@
-CONTENT:
-
- dma.h
- dma1.c
- dma2.s
-
-WHAT ARE THESE FILES:
-
-These files contain MPC8240 (Kahlua) DMA controller
-driver routines. The driver routines are not
-written for any specific operating system.
-They serves the purpose of code sample, and
-jump-start for using the MPC8240 DMA controller.
-
-For the reason of correctness of C language
-syntax, these files are compiled by Metaware
-C compiler and assembler.
-
-ENDIAN NOTATION:
-
-The algorithm is designed for big-endian mode,
-software is responsible for byte swapping.
-
-USAGE:
-
-1. The host system that is running on MPC8240
- or using MPC8240 as I/O device shall link
- the files listed here. The memory location
- of driver routines shall take into account of
- that driver routines need to run in supervisor
- mode and they process DMA controller interrupt.
-
-2. The host system is responsible for configuring
- the MPC8240 including Embedded Utilities Memory
- Block. Since the DMA controller on MPC8240 can
- be accessed by either local 603e core or the host
- that MPC8240 serves as I/O processor through host
- PCI configuration, it is important that the local
- processor uses EUMBBAR to access its local DMA
- controller while the PCI master uses I/O
- processor's PCSRBAR to access the DMA controller
- on I/O device.
-
- To qualify whether is EUMBBAR or PCSRBAR, one
- additional parameter is requied from the host
- system, LOCAL or REMOTE so that the base value
- can be correctly interpreted.
-
-3. If the host system is also using the EPIC unit
- on MPC8240, the system can register the
- DMA_ISR with the EPIC including other
- desired resources.
-
- If the host system does not using the EPIC unit
- on MPC8240, DMA_ISR function can be called for
- each desired time interval.
-
- In both cases, the host system is free to
- provide its own interrupt service routine.
-
-4. To start a direct mode DMA transaction,
- use DMA_Bld_Curr with the start parameter
- set to 1.
-
- To start a chaining mode DMA transaction,
- the application shall build descriptors
- in memory first, next, use DMA_Bld_Desp
- with the start parameter set to 1.
-
-5. DMA_Start function clears, then sets the CS
- bit of DMA mode register.
-
- DMA_Halt function clears the CS bit of DMA
- mode register.
-
- These functions can be used to start and
- halt the DMA transaction.
-
- If the chaining descriptors has been
- modified since the last time a DMA
- transaction started, use DMA_Chn_Cnt
- function to let DMA controller process
- the modified descriptor chain without
- stopping or disturbing the current DMA
- transaction.
-
- It is the host system's responsibility of
- setting up the correct DMA transfer mode
- and pass the correct memory address parameters.
-
-6. It is the host system's responsibility of
- queueing the DMA I/O request. The host
- system can call the DMA_ISR with its own
- desired interrupt service subroutines to
- handle each individual interrupt and queued
- DMA I/O requests.
-
-7. The DMA driver routines contains a set
- of utilities, Set and Get, for host system
- to query and modify the desired DMA registers.
diff --git a/cpu/mpc824x/drivers/dma/dma.h b/cpu/mpc824x/drivers/dma/dma.h
deleted file mode 100644
index a21be74..0000000
--- a/cpu/mpc824x/drivers/dma/dma.h
+++ /dev/null
@@ -1,326 +0,0 @@
-#ifndef DMA_H
-#define DMA_H
-/*******************************************************
- *
- * copyright @ Motorola 1999
- *
- *******************************************************/
-#define NUM_DMA_REG 7
-#define DMA_MR_REG 0
-#define DMA_SR_REG 1
-#define DMA_CDAR_REG 2
-#define DMA_SAR_REG 3
-#define DMA_DAR_REG 4
-#define DMA_BCR_REG 5
-#define DMA_NDAR_REG 6
-
-typedef enum _dmastatus
-{
- DMASUCCESS = 0x1000,
- DMALMERROR,
- DMAPERROR,
- DMACHNBUSY,
- DMAEOSINT,
- DMAEOCAINT,
- DMAINVALID,
- DMANOEVENT,
-} DMAStatus;
-
-typedef enum _location
-{
- LOCAL = 0, /* local processor accesses on board DMA,
- local processor's eumbbar is required */
- REMOTE = 1, /* PCI master accesses DMA on I/O board,
- I/O processor's pcsrbar is required */
-} LOCATION;
-
-typedef enum dma_mr_bit
-{
- IRQS = 0x00080000,
- PDE = 0x00040000,
- DAHTS = 0x00030000,
- SAHTS = 0x0000c000,
- DAHE = 0x00002000,
- SAHE = 0x00001000,
- PRC = 0x00000c00,
- EIE = 0x00000080,
- EOTIE = 0x00000040,
- DL = 0x00000008,
- CTM = 0x00000004,
- CC = 0x00000002,
- CS = 0x00000001,
-} DMA_MR_BIT;
-
-typedef enum dma_sr_bit
-{
- LME = 0x00000080,
- PE = 0x00000010,
- CB = 0x00000004,
- EOSI = 0x00000002,
- EOCAI = 0x00000001,
-} DMA_SR_BIT;
-
-/* structure for DMA Mode Register */
-typedef struct _dma_mr
-{
- unsigned int reserved0 : 12;
- unsigned int irqs : 1;
- unsigned int pde : 1;
- unsigned int dahts : 2;
- unsigned int sahts : 2;
- unsigned int dahe : 1;
- unsigned int sahe : 1;
- unsigned int prc : 2;
- unsigned int reserved1 : 1;
- unsigned int eie : 1;
- unsigned int eotie : 1;
- unsigned int reserved2 : 3;
- unsigned int dl : 1;
- unsigned int ctm : 1;
- /* if chaining mode is enabled, any time, user can modify the
- * descriptor and does not need to halt the current DMA transaction.
- * Set CC bit, enable DMA to process the modified descriptors
- * Hardware will clear this bit each time, DMA starts.
- */
- unsigned int cc : 1;
- /* cs bit has dua role, halt the current DMA transaction and
- * (re)start DMA transaction. In chaining mode, if the descriptor
- * needs modification, cs bit shall be used not the cc bit.
- * Hardware will not set/clear this bit each time DMA transaction
- * stops or starts. Software shall do it.
- *
- * cs bit shall not be used to halt chaining DMA transaction for
- * modifying the descriptor. That is the role of CC bit.
- */
- unsigned int cs : 1;
-} DMA_MR;
-
-/* structure for DMA Status register */
-typedef struct _dma_sr
-{
- unsigned int reserved0 : 24;
- unsigned int lme : 1;
- unsigned int reserved1 : 2;
- unsigned int pe : 1;
- unsigned int reserved2 : 1;
- unsigned int cb : 1;
- unsigned int eosi : 1;
- unsigned int eocai : 1;
-} DMA_SR;
-
-/* structure for DMA current descriptor address register */
-typedef struct _dma_cdar
-{
- unsigned int cda : 27;
- unsigned int snen : 1;
- unsigned int eosie : 1;
- unsigned int ctt : 2;
- unsigned int eotd : 1;
-} DMA_CDAR;
-
-/* structure for DMA byte count register */
-typedef struct _dma_bcr
-{
- unsigned int reserved : 6;
- unsigned int bcr : 26;
-} DMA_BCR;
-
-/* structure for DMA Next Descriptor Address register */
-typedef struct _dma_ndar
-{
- unsigned int nda : 27;
- unsigned int ndsnen : 1;
- unsigned int ndeosie: 1;
- unsigned int ndctt : 2;
- unsigned int eotd : 1;
-} DMA_NDAR;
-
-/* structure for DMA current transaction info */
-typedef struct _dma_curr
-{
- unsigned int src_addr;
- unsigned int dest_addr;
- unsigned int byte_cnt;
-} DMA_CURR;
-
-/************************* Kernel API********************
- * Kernel APIs are used to interface with O.S. kernel.
- * They are the functions required by O.S. kernel to
- * provide I/O service.
- ********************************************************/
-
-/**************DMA Device Control Functions ********/
-
-/**
- * Note:
- *
- * In all following functions, the host (KAHLUA) processor has a
- * choice of accessing on board local DMA (LOCAL),
- * or DMA on a distributed KAHLUA (REMOTE). In either case,
- * the caller shall pass the configured embedded utility memory
- * block base address relative to the DMA. If LOCAL DMA is used,
- * this parameter shall be EUMBBAR, if REMOTE is used, the
- * parameter shall be the corresponding PCSRBAR.
- **/
-
-/**************************************************************
- * function: DMA_Get_Stat
- *
- * description: return the content of status register of
- * the given DMA channel
- * if error, return DMAINVALID. Otherwise return
- * DMASUCCESS.
- *
- **************************************************************/
-static DMAStatus DMA_Get_Stat( LOCATION, unsigned int eumbbar, unsigned int channel, DMA_SR * );
-
-/**************************************************************
- * function: DMA_Get_Mode
- *
- * description: return the content of mode register of the
- * given DMA channel
- * if error, return DMAINVALID. Otherwise return DMASUCCESS.
- *
- **************************************************************/
-static DMAStatus DMA_Get_Mode( LOCATION, unsigned int eumbbar, unsigned int channel, DMA_MR * );
-
-/**************************************************************
- * function: DMA_Set_Mode
- *
- * description: Set a new mode to a given DMA channel
- * return DMASUCCESS if success, otherwise return DMACHNINVALID
- *
- * note: It is not a good idea of changing the DMA mode during
- * the middle of a transaction.
- **************************************************************/
-static DMAStatus DMA_Set_Mode( LOCATION, unsigned int eumbbar, unsigned int channel, DMA_MR mode );
-
-/*************************************************************
- * function: DMA_ISR
- *
- * description: DMA interrupt service routine
- * return DMAStatus based on the status
- *
- *************************************************************/
-static DMAStatus DMA_ISR( unsigned int eumbbar,
- unsigned int channel,
- DMAStatus (*lme_func)( unsigned int, unsigned int, DMAStatus ),
- DMAStatus (*pe_func) ( unsigned int, unsigned int, DMAStatus ),
- DMAStatus (*eosi_func)( unsigned int, unsigned int, DMAStatus ),
- DMAStatus (*eocai_func)(unsigned int, unsigned int, DMAStatus ));
-
-static DMAStatus dma_error_func( unsigned int, unsigned int, DMAStatus );
-
-/********************* DMA I/O function ********************/
-
-/************************************************************
- * function: DMA_Start
- *
- * description: start a given DMA channel transaction
- * return DMASUCCESS if success, otherwise return DMACHNINVALID
- *
- * note: this function will clear DMA_MR(CC) first, then
- * set DMA_MR(CC).
- ***********************************************************/
-static DMAStatus DMA_Start( LOCATION, unsigned int eumbbar,unsigned int channel );
-
-/***********************************************************
- * function: DMA_Halt
- *
- * description: halt the current dma transaction on the specified
- * channel.
- * return DMASUCCESS if success, otherwise return DMACHNINVALID
- *
- * note: if the specified DMA channel is idle, nothing happens
- *************************************************************/
-static DMAStatus DMA_Halt( LOCATION, unsigned int eumbbar,unsigned int channel );
-
-/*************************************************************
- * function: DMA_Chn_Cnt
- *
- * description: set the DMA_MR(CC) bit for a given channel
- * that is in chaining mode.
- * return DMASUCCESS if successfule, otherwise return DMACHNINVALID
- *
- * note: if the given channel is not in chaining mode, nothing
- * happen.
- *
- *************************************************************/
-static DMAStatus DMA_Chn_Cnt( LOCATION, unsigned int eumbbar,unsigned int channel );
-
-/*********************** App. API ***************************
- * App. API are the APIs Kernel provides for the application
- * level program
- ************************************************************/
-/**************************************************************
- * function: DMA_Bld_Curr
- *
- * description: set current src, dest, byte count registers
- * according to the desp for a given channel
- *
- * if the given channel is busy, no change made,
- * return DMACHNBUSY.
- *
- * otherwise return DMASUCCESS.
- *
- * note:
- **************************************************************/
-static DMAStatus DMA_Bld_Curr( LOCATION,
- unsigned int eumbbar,
- unsigned int channel,
- DMA_CURR desp );
-
-/**************************************************************
- * function: DMA_Poke_Curr
- *
- * description: poke the current src, dest, byte count registers
- * for a given channel.
- *
- * return DMASUCCESS if no error otherwise return DMACHNERROR
- *
- * note: Due to the undeterministic parallelism, in chaining
- * mode, the value returned by this function shall
- * be taken as reference when the query is made rather
- * than the absolute snapshot when the value is returned.
- **************************************************************/
-static DMAStatus DMA_Poke_Curr( LOCATION,
- unsigned int eumbbar,
- unsigned int channel,
- DMA_CURR* desp );
-
-/**************************************************************
- * function: DMA_Bld_Desp
- *
- * description: set current descriptor address register
- * according to the desp for a given channel
- *
- * if the given channel is busy return DMACHNBUSY
- * and no change made, otherwise return DMASUCCESS.
- *
- * note:
- **************************************************************/
-static DMAStatus DMA_Bld_Desp( LOCATION host,
- unsigned int eumbbar,
- unsigned int channel,
- DMA_CDAR desp );
-
-/**************************************************************
- * function: DMA_Poke_Desp
- *
- * description: poke the current descriptor address register
- * for a given channel
- *
- * return DMASUCCESS if no error otherwise return
- * DMAINVALID
- *
- * note: Due to the undeterministic parallellism of DMA operation,
- * the value returned by this function shall be taken as
- * the most recently used descriptor when the last time
- * DMA starts a chaining mode operation.
- **************************************************************/
-static DMAStatus DMA_Poke_Desp( LOCATION,
- unsigned int eumbbar,
- unsigned int channel,
- DMA_CDAR *desp );
-
-#endif
diff --git a/cpu/mpc824x/drivers/dma/dma1.c b/cpu/mpc824x/drivers/dma/dma1.c
deleted file mode 100644
index 9c85267..0000000
--- a/cpu/mpc824x/drivers/dma/dma1.c
+++ /dev/null
@@ -1,801 +0,0 @@
-/************************************************************
- *
- * copyright @ Motorola, 1999
- *
- * App. API
- *
- * App. API are the APIs Kernel provides for the application
- * level program
- *
- ************************************************************/
-#include "dma_export.h"
-#include "dma.h"
-
-/* Define a macro to use an optional application-layer print function, if
- * one was passed to the library during initialization. If there was no
- * function pointer passed, this protects against referencing a NULL pointer.
- * Also define The global variable that holds the passed pointer.
- */
-#define PRINT if ( app_print ) app_print
-static int (*app_print)(char *,...);
-
-/* Set by call to get_eumbbar during DMA_Initialize.
- * This could be globally available to the library, but there is
- * an advantage to passing it as a parameter: it is already in a register
- * and doesn't have to be loaded from memory. Also, that is the way the
- * library was already implemented and I don't want to change it without
- * a more detailed analysis.
- * It is being set as a global variable during initialization to hide it from
- * the DINK application layer, because it is Kahlua-specific. I think that
- * get_eumbbar, load_runtime_reg, and store_runtime_reg should be defined in
- * a Kahlua-specific library dealing with the embedded utilities memory block.
- * Right now, get_eumbbar is defined in dink32/kahlua.s. The other two are
- * defined in dink32/drivers/i2c/i2c2.s, drivers/dma/dma2.s, etc.
- */
-static unsigned int Global_eumbbar = 0;
-extern unsigned int get_eumbbar();
-
-
-extern unsigned int load_runtime_reg( unsigned int eumbbar, unsigned int reg );
-#pragma Alias( load_runtime_reg, "load_runtime_reg" );
-
-extern void store_runtime_reg( unsigned int eumbbar, unsigned int reg, unsigned int val );
-#pragma Alias( store_runtime_reg, "store_runtime_reg" );
-
-unsigned int dma_reg_tb[][14] = {
- /* local DMA registers */
- {
- /* DMA_0_MR */ 0x00001100,
- /* DMA_0_SR */ 0x00001104,
- /* DMA_0_CDAR */ 0x00001108,
- /* DMA_0_SAR */ 0x00001110,
- /* DMA_0_DAR */ 0x00001118,
- /* DMA_0_BCR */ 0x00001120,
- /* DMA_0_NDAR */ 0x00001124,
- /* DMA_1_MR */ 0x00001200,
- /* DMA_1_SR */ 0x00001204,
- /* DMA_1_CDAR */ 0x00001208,
- /* DMA_1_SAR */ 0x00001210,
- /* DMA_1_DAR */ 0x00001218,
- /* DMA_1_BCR */ 0x00001220,
- /* DMA_1_NDAR */ 0x00001224,
- },
- /* remote DMA registers */
- {
- /* DMA_0_MR */ 0x00000100,
- /* DMA_0_SR */ 0x00000104,
- /* DMA_0_CDAR */ 0x00000108,
- /* DMA_0_SAR */ 0x00000110,
- /* DMA_0_DAR */ 0x00000118,
- /* DMA_0_BCR */ 0x00000120,
- /* DMA_0_NDAR */ 0x00000124,
- /* DMA_1_MR */ 0x00000200,
- /* DMA_1_SR */ 0x00000204,
- /* DMA_1_CDAR */ 0x00000208,
- /* DMA_1_SAR */ 0x00000210,
- /* DMA_1_DAR */ 0x00000218,
- /* DMA_1_BCR */ 0x00000220,
- /* DMA_1_NDAR */ 0x00000224,
- },
-};
-
-/* API functions */
-
-/* Initialize DMA unit with the following:
- * optional pointer to application layer print function
- *
- * These parameters may be added:
- * ???
- * Interrupt enables, modes, etc. are set for each transfer.
- *
- * This function must be called before DMA unit can be used.
- */
-extern
-DMA_Status DMA_Initialize( int (*p)(char *,...))
-{
- DMAStatus status;
- /* establish the pointer, if there is one, to the application's "printf" */
- app_print = p;
-
- /* If this is the first call, get the embedded utilities memory block
- * base address. I'm not sure what to do about error handling here:
- * if a non-zero value is returned, accept it.
- */
- if ( Global_eumbbar == 0)
- Global_eumbbar = get_eumbbar();
- if ( Global_eumbbar == 0)
- {
- PRINT( "DMA_Initialize: can't find EUMBBAR\n" );
- return DMA_ERROR;
- }
-
- return DMA_SUCCESS;
-}
-
-
-/* Perform the DMA transfer, only direct mode is currently implemented.
- * At this point, I think it would be better to define a different
- * function for chaining mode.
- * Also, I'm not sure if it is appropriate to have the "generic" API
- * accept snoop and int_steer parameters. The DINK user interface allows
- * them, so for now I'll leave them.
- *
- * int_steer controls DMA interrupt steering to PCI or local processor
- * type is the type of transfer: M2M, M2P, P2M, P2P
- * source is the source address of the data
- * dest is the destination address of the data
- * len is the length of data to transfer
- * channel is the DMA channel to use for the transfer
- * snoop is the snoop enable control
- */
-extern DMA_Status DMA_direct_transfer( DMA_INTERRUPT_STEER int_steer,
- DMA_TRANSFER_TYPE type,
- unsigned int source,
- unsigned int dest,
- unsigned int len,
- DMA_CHANNEL channel,
- DMA_SNOOP_MODE snoop)
-{
- DMA_MR md;
- DMA_CDAR cdar;
- /* it's inappropriate for curr to be a struct, but I'll leave it */
- DMA_CURR curr;
-
- DMAStatus stat;
-
- /* The rest of this code was moved from device.c test_dma to here.
- * It needs to be cleaned up and validated, but at least it is removed
- * from the application and API. Most of the mode is left hard coded.
- * This should be changed after the final API is defined and the user
- * application has a way to control the transfer.
- *
- */
-
- if ( DMA_Get_Mode( LOCAL, Global_eumbbar, channel, &md ) != DMASUCCESS )
- {
- return DMA_ERROR;
- }
-
- md.irqs = int_steer;
- md.pde = 0;
- md.dahts = 3; /* 8 - byte */
- md.sahts = 3; /* 8 - byte */
- md.dahe = 0;
- md.sahe = 0;
- md.prc = 0;
- /* if steering interrupts to local processor, use polling mode */
- if ( int_steer == DMA_INT_STEER_PCI )
- {
- md.eie = 1;
- md.eotie = 1;
- } else {
- md.eie = 0;
- md.eotie = 0;
- }
- md.dl = 0;
- md.ctm = 1; /* direct mode */
- md.cc = 0;
-
- /* validate the length range */
- if (len > 0x3ffffff )
- {
- PRINT( "dev DMA: length of transfer too large: %d\n", len );
- return DMA_ERROR;
- }
-
- /* inappropriate to use a struct, but leave as is for now */
- curr.src_addr = source;
- curr.dest_addr = dest;
- curr.byte_cnt = len;
-
- (void)DMA_Poke_Desp( LOCAL, Global_eumbbar, channel, &cdar );
- cdar.snen = snoop;
- cdar.ctt = type;
-
- if ( ( stat = DMA_Bld_Desp( LOCAL, Global_eumbbar, channel, cdar ))
- != DMASUCCESS ||
- ( stat = DMA_Bld_Curr( LOCAL, Global_eumbbar, channel, curr ))
- != DMASUCCESS ||
- ( stat = DMA_Set_Mode( LOCAL, Global_eumbbar, channel, md ))
- != DMASUCCESS ||
- ( stat = DMA_Start( LOCAL, Global_eumbbar, channel ))
- != DMASUCCESS )
- {
- if ( stat == DMACHNBUSY )
- {
- PRINT( "dev DMA: channel %d busy.\n", channel );
- }
- else
- {
- PRINT( "dev DMA: invalid channel request.\n", channel );
- }
-
- return DMA_ERROR;
- }
-
-/* Since we are interested at the DMA performace right now,
- we are going to do as less as possible to burden the
- 603e core.
-
- if you have epic enabled or don't care the return from
- DMA operation, you can just return SUCCESS.
-
- if you don't have epic enabled and care the DMA result,
- you can use the polling method below.
-
- Note: I'll attempt to activate the code for handling polling.
- */
-
-#if 0
- /* if steering interrupt to local processor, let it handle results */
- if ( int_steer == DMA_INT_STEER_LOCAL )
- {
- return DMA_SUCCESS;
- }
-
- /* polling since interrupt goes to PCI */
- do
- {
- stat = DMA_ISR( Global_eumbbar, channel, dma_error_func,
- dma_error_func, dma_error_func, dma_error_func );
- }
- while ( stat == DMANOEVENT );
-#endif
-
- return DMA_SUCCESS;
-}
-
-/* DMA library internal functions */
-
-/**
- * Note:
- *
- * In all following functions, the host (KAHLUA) processor has a
- * choice of accessing on board local DMA (LOCAL),
- * or DMA on a distributed KAHLUA (REMOTE). In either case,
- * the caller shall pass the configured embedded utility memory
- * block base address relative to the DMA. If LOCAL DMA is used,
- * this parameter shall be EUMBBAR, if REMOTE is used, the
- * parameter shall be the corresponding PCSRBAR.
- **/
-
-/**************************************************************
- * function: DMA_Get_Stat
- *
- * description: return the content of status register of
- * the given DMA channel
- *
- * if error, reserved0 field all 1s.
- **************************************************************/
-static
-DMAStatus DMA_Get_Stat( LOCATION host, unsigned int eumbbar, unsigned int channel, DMA_SR *stat )
-{
- unsigned int tmp;
-
- if ( channel != 0 && channel != 1 || stat == 0 )
- {
- return DMAINVALID;
- }
-
- tmp = load_runtime_reg( eumbbar, dma_reg_tb[host][channel*NUM_DMA_REG+DMA_SR_REG] );
-#ifdef DMADBG0
- PRINT( "%s(%d): %s DMA %d (0x%08x) stat = 0x%08x\n", __FILE__, __LINE__,
- ( host == LOCAL ? "local" : "remote" ), channel, dma_reg_tb[host][channel*NUM_DMA_REG+DMA_SR_REG], tmp );
-#endif
-
- stat->reserved0 = ( tmp & 0xffffff00 ) >> 8;
- stat->lme = ( tmp & 0x00000080 ) >> 7;
- stat->reserved1 = ( tmp & 0x00000060 ) >> 5;
- stat->pe = ( tmp & 0x00000010 ) >> 4;
- stat->reserved2 = ( tmp & 0x00000008 ) >> 3;
- stat->cb = ( tmp & 0x00000004 ) >> 2;
- stat->eosi = ( tmp & 0x00000002 ) >> 1;
- stat->eocai = ( tmp & 0x00000001 );
-
- return DMASUCCESS;
-}
-
-/**************************************************************
- * function: DMA_Get_Mode
- *
- * description: return the content of mode register of the
- * given DMA channel
- *
- * if error, return DMAINVALID, otherwise return
- * DMASUCCESS
- **************************************************************/
-static
-DMAStatus DMA_Get_Mode( LOCATION host, unsigned eumbbar, unsigned int channel, DMA_MR *mode )
-{
- unsigned int tmp;
- if ( channel != 0 && channel != 1 || mode == 0 )
- {
- return DMAINVALID;
- }
-
- tmp = load_runtime_reg( eumbbar, dma_reg_tb[host][channel*NUM_DMA_REG+DMA_MR_REG] );
-
-#ifdef DMADBG0
- PRINT( "%s(%d): %s DMA %d (0x%08x) mode = 0x%08x\n", __FILE__, __LINE__,
- ( host == LOCAL ? "local" : "remote" ), channel, dma_reg_tb[host][channel*NUM_DMA_REG+DMA_MR_REG], tmp );
-#endif
-
- mode->reserved0 = (tmp & 0xfff00000) >> 20;
- mode->irqs = (tmp & 0x00080000) >> 19;
- mode->pde = (tmp & 0x00040000) >> 18;
- mode->dahts = (tmp & 0x00030000) >> 16;
- mode->sahts = (tmp & 0x0000c000) >> 14;
- mode->dahe = (tmp & 0x00002000) >> 13;
- mode->sahe = (tmp & 0x00001000) >> 12;
- mode->prc = (tmp & 0x00000c00) >> 10;
- mode->reserved1 = (tmp & 0x00000200) >> 9;
- mode->eie = (tmp & 0x00000100) >> 8;
- mode->eotie = (tmp & 0x00000080) >> 7;
- mode->reserved2 = (tmp & 0x00000070) >> 4;
- mode->dl = (tmp & 0x00000008) >> 3;
- mode->ctm = (tmp & 0x00000004) >> 2;
- mode->cc = (tmp & 0x00000002) >> 1;
- mode->cs = (tmp & 0x00000001);
-
- return DMASUCCESS;
-}
-
-/**************************************************************
- * function: DMA_Set_Mode
- *
- * description: Set a new mode to a given DMA channel
- *
- * note: It is not a good idea of changing the DMA mode during
- * the middle of a transaction.
- **************************************************************/
-static
-DMAStatus DMA_Set_Mode( LOCATION host, unsigned eumbbar, unsigned int channel, DMA_MR mode )
-{
- unsigned int tmp;
- if ( channel != 0 && channel != 1 )
- {
- return DMAINVALID;
- }
-
- tmp = ( mode.reserved0 & 0xfff ) << 20;
- tmp |= ( ( mode.irqs & 0x1 ) << 19);
- tmp |= ( ( mode.pde & 0x1 ) << 18 );
- tmp |= ( ( mode.dahts & 0x3 ) << 16 );
- tmp |= ( ( mode.sahts & 0x3 ) << 14 );
- tmp |= ( ( mode.dahe & 0x1 ) << 13 );
- tmp |= ( ( mode.sahe & 0x1 ) << 12 );
- tmp |= ( ( mode.prc & 0x3 ) << 10 );
- tmp |= ( ( mode.reserved1 & 0x1 ) << 9 );
- tmp |= ( ( mode.eie & 0x1 ) << 8 );
- tmp |= ( ( mode.eotie & 0x1 ) << 7 );
- tmp |= ( ( mode.reserved2 & 0x7 ) << 4 );
- tmp |= ( ( mode.dl & 0x1 ) << 3 );
- tmp |= ( ( mode.ctm & 0x1 ) << 2 );
- tmp |= ( ( mode.cc & 0x1 ) << 1 ) ;
- tmp |= ( mode.cs & 0x1 );
-
- store_runtime_reg( eumbbar, dma_reg_tb[host][channel*NUM_DMA_REG + DMA_MR_REG], tmp );
- return DMASUCCESS;
-}
-
-/************************************************************
- * function: DMA_Start
- *
- * description: start a given DMA channel transaction
- * return DMASUCCESS if success otherwise return
- * DMAStatus value
- *
- * note: this function will clear DMA_MR(CC) first, then
- * set DMA_MR(CC).
- ***********************************************************/
-static
-DMAStatus DMA_Start( LOCATION host, unsigned int eumbbar, unsigned int channel )
-{
- DMA_SR stat;
- unsigned int mode;
-
- if ( channel != 0 && channel != 1 )
- {
- return DMAINVALID;
- }
-
- if ( DMA_Get_Stat( host, eumbbar, channel, &stat ) != DMASUCCESS )
- {
- return DMAINVALID;
- }
-
- if ( stat.cb == 1 )
- {
- /* DMA is not free */
- return DMACHNBUSY;
- }
-
- mode = load_runtime_reg( eumbbar, dma_reg_tb[host][channel*NUM_DMA_REG + DMA_MR_REG] );
- /* clear DMA_MR(CS) */
- mode &= 0xfffffffe;
- store_runtime_reg( eumbbar, dma_reg_tb[host][channel*NUM_DMA_REG + DMA_MR_REG], mode );
-
- /* set DMA_MR(CS) */
- mode |= CS;
- store_runtime_reg( eumbbar, dma_reg_tb[host][channel*NUM_DMA_REG + DMA_MR_REG], mode );
- return DMASUCCESS;
-}
-
-/***********************************************************
- * function: DMA_Halt
- *
- * description: halt the current dma transaction on the specified
- * channel.
- * return DMASUCCESS if success otherwise return DMAINVALID
- *
- * note: if the specified DMA channel is idle, nothing happens
- *************************************************************/
-static
-DMAStatus DMA_Halt( LOCATION host, unsigned int eumbbar, unsigned int channel )
-{
- unsigned int mode;
- if ( channel != 0 && channel != 1 )
- {
- return DMAINVALID;
- }
-
- mode = load_runtime_reg( eumbbar, dma_reg_tb[host][channel*NUM_DMA_REG + DMA_MR_REG]);
-
- /* clear DMA_MR(CS) */
- mode &= 0xfffffffe;
- store_runtime_reg(eumbbar, dma_reg_tb[host][channel*NUM_DMA_REG + DMA_MR_REG], mode );
- return DMASUCCESS;
-}
-
-/*************************************************************
- * function: DMA_Chn_Cnt
- *
- * description: set the DMA_MR(CC) bit for a given channel
- * that is in chaining mode.
- * return DMASUCCESS if successfule, otherwise return
- * DMAINVALID.
- *
- * note: if the given channel is not in chaining mode, nothing
- * happen.
- *
- *************************************************************/
-static
-DMAStatus DMA_Chn_Cnt( LOCATION host, unsigned int eumbbar, unsigned int channel )
-{
- DMA_MR mode;
- if ( channel != 0 && channel != 1 )
- {
- return DMAINVALID;
- }
-
- if ( DMA_Get_Mode( host, eumbbar, channel, &mode ) != DMASUCCESS )
- {
- return DMAINVALID;
- }
-
- if ( mode.ctm == 0 )
- {
- /* either illegal mode or not chaining mode */
- return DMAINVALID;
- }
-
- mode.cc = 1;
- return DMA_Set_Mode( host, eumbbar, channel, mode );
-}
-
-/**************************************************************
- * function: DMA_Bld_Desp
- *
- * description: set current descriptor address register
- * according to the desp for a given channel
- *
- * if the given channel is busy return DMACHNBUSY
- * and no change made, otherwise return DMASUCCESS.
- *
- * note:
- **************************************************************/
-static
-DMAStatus DMA_Bld_Desp( LOCATION host,
- unsigned int eumbbar,
- unsigned int channel,
- DMA_CDAR desp )
-{
- DMA_SR status;
- unsigned int temp;
-
- if ( channel != 0 && channel != 1 )
- {
- /* channel number out of range */
- return DMAINVALID;
- }
-
- if ( DMA_Get_Stat( host, eumbbar, channel, &status ) != DMASUCCESS )
- {
- return DMAINVALID;
- }
-
- if ( status.cb == 1 )
- {
- /* channel busy */
- return DMACHNBUSY;
- }
-
- temp = ( desp.cda & 0x7ffffff ) << 5;
- temp |= (( desp.snen & 0x1 ) << 4 );
- temp |= (( desp.eosie & 0x1 ) << 3 );
- temp |= (( desp.ctt & 0x3 ) << 1 );
- temp |= ( desp.eotd & 0x1 );
-
- store_runtime_reg( eumbbar, dma_reg_tb[host][channel*NUM_DMA_REG+DMA_CDAR_REG], temp );
-
-#ifdef DMADBG0
- PRINT( "%s(%d): %s DMA %d (0x%08x) cdar := 0x%08x\n", __FILE__, __LINE__,
- ( host == LOCAL ? "local" : "remote" ), channel, dma_reg_tb[host][channel*NUM_DMA_REG+DMA_CDAR_REG], temp );
-#endif
-
- return DMASUCCESS;
-}
-
-/**************************************************************
- * function: DMA_Poke_Desp
- *
- * description: poke the current descriptor address register
- * for a given channel
- *
- * return DMASUCCESS if no error
- *
- * note: Due to the undeterministic parallellism of DMA operation,
- * the value returned by this function shall be taken as
- * the most recently used descriptor when the last time
- * DMA starts a chaining mode operation.
- **************************************************************/
-static
-DMAStatus DMA_Poke_Desp( LOCATION host,
- unsigned int eumbbar,
- unsigned int channel,
- DMA_CDAR *desp )
-{
- unsigned int cdar;
- if ( channel != 0 && channel != 1 || desp == 0 )
- {
- return DMAINVALID;
- }
-
- cdar = load_runtime_reg( eumbbar, dma_reg_tb[host][channel*NUM_DMA_REG+DMA_CDAR_REG] );
-
-#ifdef DMADBG0
- PRINT( "%s(%d): %s DMA %d (0x%08x) cdar : 0x%08x\n", __FILE__, __LINE__,
- ( host == LOCAL ? "local" : "remote" ), channel, dma_reg_tb[host][channel*NUM_DMA_REG+DMA_CDAR_REG], cdar );
-#endif
-
-
- desp->cda = ( cdar & 0xffffffe0 ) >> 5;
- desp->snen = ( cdar & 0x00000010 ) >> 4;
- desp->eosie = ( cdar & 0x00000008 ) >> 3;
- desp->ctt = ( cdar & 0x00000006 ) >> 1;
- desp->eotd = ( cdar & 0x00000001 );
-
- return DMASUCCESS;
-}
-
-/**************************************************************
- * function: DMA_Bld_Curr
- *
- * description: set current src, dest, byte count registers
- * according to the desp for a given channel
- * return DMASUCCESS if no error.
- *
- * note:
- **************************************************************/
-static
-DMAStatus DMA_Bld_Curr( LOCATION host,
- unsigned int eumbbar,
- unsigned int channel,
- DMA_CURR desp )
-{
- DMA_SR status;
- if ( channel != 0 && channel != 1 )
- {
- /* channel number out of range */
- return DMAINVALID;
- }
-
- if ( DMA_Get_Stat( host, eumbbar, channel, &status ) != DMASUCCESS )
- {
- return DMAINVALID;
- }
-
- if ( status.cb == 1 )
- {
- /* channel busy */
- return DMACHNBUSY;
- }
-
- desp.byte_cnt &= 0x03ffffff; /* upper 6-bits are 0s */
-
- store_runtime_reg( eumbbar, dma_reg_tb[host][channel*NUM_DMA_REG+DMA_SAR_REG], desp.src_addr );
-#ifdef DMADBG0
- PRINT( "%s(%d): %s DMA %d (0x%08x) src := 0x%08x\n", __FILE__, __LINE__,
- ( host == LOCAL ? "local" : "remote" ), channel, dma_reg_tb[host][channel*NUM_DMA_REG+DMA_CDAR_REG], desp.src_addr );
-#endif
-
- store_runtime_reg( eumbbar, dma_reg_tb[host][channel*NUM_DMA_REG+DMA_DAR_REG], desp.dest_addr );
-#ifdef DMADBG0
- PRINT( "%s(%d): %s DMA %d (0x%08x) dest := 0x%08x\n", __FILE__, __LINE__,
- ( host == LOCAL ? "local" : "remote" ), channel, dma_reg_tb[host][channel*NUM_DMA_REG+DMA_CDAR_REG], desp.dest_addr );
-#endif
-
- store_runtime_reg( eumbbar, dma_reg_tb[host][channel*NUM_DMA_REG+DMA_BCR_REG], desp.byte_cnt );
-#ifdef DMADBG0
- PRINT( "%s(%d): %s DMA %d (0x%08x) count := 0x%08x\n", __FILE__, __LINE__,
- ( host == LOCAL ? "local" : "remote" ), channel, dma_reg_tb[host][channel*NUM_DMA_REG+DMA_CDAR_REG], desp.byte_cnt );
-#endif
-
-
- return DMASUCCESS;
-
-}
-
-/**************************************************************
- * function: DMA_Poke_Curr
- *
- * description: poke the current src, dest, byte count registers
- * for a given channel.
- *
- * return DMASUCCESS if no error
- *
- * note: Due to the undeterministic parallelism, in chaining
- * mode, the value returned by this function shall
- * be taken as reference when the query is made rather
- * than the absolute snapshot when the value is returned.
- **************************************************************/
-static
-DMAStatus DMA_Poke_Curr( LOCATION host,
- unsigned int eumbbar,
- unsigned int channel,
- DMA_CURR* desp )
-{
- if ( channel != 0 && channel != 1 || desp == 0 )
- {
- return DMAINVALID;
- }
-
- desp->src_addr = load_runtime_reg( eumbbar, dma_reg_tb[host][channel*NUM_DMA_REG+DMA_SAR_REG] );
-#ifdef DMADBG0
- PRINT( "%s(%d): %s DMA %d (0x%08x) src : 0x%08x\n", __FILE__, __LINE__,
- ( host == LOCAL ? "local" : "remote" ), channel, dma_reg_tb[host][channel*NUM_DMA_REG+DMA_CDAR_REG], desp->src_addr );
-#endif
-
- desp->dest_addr = load_runtime_reg( eumbbar, dma_reg_tb[host][channel*NUM_DMA_REG+DMA_DAR_REG] );
-#ifdef DMADBG0
- PRINT( "%s(%d): %s DMA %d (0x%08x) dest : 0x%08x\n", __FILE__, __LINE__,
- ( host == LOCAL ? "local" : "remote" ), channel, dma_reg_tb[host][channel*NUM_DMA_REG+DMA_CDAR_REG], desp->dest_addr );
-#endif
-
- desp->byte_cnt = load_runtime_reg( eumbbar, dma_reg_tb[host][channel*NUM_DMA_REG+DMA_BCR_REG] );
-#ifdef DMADBG0
- PRINT( "%s(%d): %s DMA %d (0x%08x) count : 0x%08x\n", __FILE__, __LINE__,
- ( host == LOCAL ? "local" : "remote" ), channel, dma_reg_tb[host][channel*NUM_DMA_REG+DMA_CDAR_REG], desp->byte_cnt );
-#endif
-
-
- return DMASUCCESS;
-}
-
-/*****************************************************************
- * function: dma_error_func
- *
- * description: display the error information
- *
- * note: This seems like a highly convoluted way to handle messages,
- * but I'll leave it as it was in device.c when I moved it into the
- * DMA library source.
- ****************************************************************/
-static
-DMAStatus dma_error_func( unsigned int eumbbar, unsigned int chn, DMAStatus err)
-{
- unsigned char *msg[] =
- {
- "Local Memory Error",
- "PCI Error",
- "Channel Busy",
- "End-of-Segment Interrupt",
- "End-of-Chain/Direct Interrupt",
- };
-
- if ( err >= DMALMERROR && err <= DMAEOCAINT )
- {
- PRINT( "DMA Status: channel %d %s\n", chn, msg[err-DMASUCCESS-1] );
- }
-
- return err;
-
-}
-
-/*************************************************************
- * function: DMA_ISR
- *
- * description: DMA interrupt service routine
- * return DMAStatus value based on
- * the status
- *
- *************************************************************/
-static
-DMAStatus DMA_ISR( unsigned int eumbbar,
- unsigned int channel,
- DMAStatus (*lme_func)( unsigned int, unsigned int, DMAStatus ),
- DMAStatus (*pe_func) ( unsigned int, unsigned int, DMAStatus ),
- DMAStatus (*eosi_func)( unsigned int, unsigned int, DMAStatus ),
- DMAStatus (*eocai_func)(unsigned int, unsigned int, DMAStatus ))
-{
-
- DMA_SR stat;
- DMAStatus rval = DMANOEVENT;
- unsigned int temp;
-
- if ( channel != 0 && channel != 1 )
- {
- return DMAINVALID;
- }
-
- if ( DMA_Get_Stat( LOCAL, eumbbar, channel, &stat ) != DMASUCCESS )
- {
- return DMAINVALID;
- }
-
- if ( stat.lme == 1 )
- {
- /* local memory error */
- rval = DMALMERROR;
- if ( lme_func != 0 )
- {
- rval = (*lme_func)(eumbbar, channel, DMALMERROR );
- }
-
- }
- else if ( stat.pe == 1 )
- {
- /* PCI error */
- rval = DMAPERROR;
- if ( pe_func != 0 )
- {
- rval = (*pe_func)(eumbbar, channel, DMAPERROR );
- }
-
- }
- else if ( stat.eosi == 1 )
- {
- /* end-of-segment interrupt */
- rval = DMAEOSINT;
- if ( eosi_func != 0 )
- {
- rval = (*eosi_func)(eumbbar, channel, DMAEOSINT );
- }
- }
- else
- {
- /* End-of-chain/direct interrupt */
- rval = DMAEOCAINT;
- if ( eocai_func != 0 )
- {
- rval = (*eocai_func)(eumbbar, channel, DMAEOCAINT );
- }
- }
-
- temp = ( stat.reserved0 & 0xffffff ) << 8;
- temp |= ( ( stat.lme & 0x1 ) << 7 ); /* write one to clear */
- temp |= ( ( stat.reserved1 & 0x3 ) << 5 );
- temp |= ( ( stat.pe & 0x1 ) << 4 ); /* write one to clear */
- temp |= ( ( stat.reserved2 & 0x1 ) << 3 );
- temp |= ( ( stat.cb & 0x1 ) << 2 ); /* write one to clear */
- temp |= ( ( stat.eosi & 0x1 ) << 1 ); /* write one to clear */
- temp |= ( stat.eocai & 0x1 ); /* write one to clear */
-
- store_runtime_reg( eumbbar, dma_reg_tb[LOCAL][channel*NUM_DMA_REG + DMA_SR_REG], temp );
-
-#ifdef DMADBG0
- PRINT( "%s(%d): DMA channel %d SR := 0x%08x\n", __FILE__, __LINE__, channel, temp );
-#endif
-
- return rval;
-}
diff --git a/cpu/mpc824x/drivers/dma/dma2.S b/cpu/mpc824x/drivers/dma/dma2.S
deleted file mode 100644
index ccbc226..0000000
--- a/cpu/mpc824x/drivers/dma/dma2.S
+++ /dev/null
@@ -1,42 +0,0 @@
-/**************************************
- *
- * copyright @ Motorola, 1999
- *
- **************************************/
-
-/**********************************************************
- * function: load_runtime_reg
- *
- * input: r3 - value of eumbbar
- * r4 - register offset in embedded utility space
- *
- * output: r3 - register content
- **********************************************************/
- .text
- .align 2
- .global load_runtime_reg
-
-load_runtime_reg:
-
- lwbrx r3,r4,r3
- sync
-
- bclr 20, 0
-
-/****************************************************************
- * function: store_runtime_reg
- *
- * input: r3 - value of eumbbar
- * r4 - register offset in embedded utility space
- * r5 - new value to be stored
- *
- ****************************************************************/
- .text
- .align 2
- .global store_runtime_reg
-store_runtime_reg:
-
- stwbrx r5, r4, r3
- sync
-
- bclr 20,0
diff --git a/cpu/mpc824x/drivers/dma/dma_export.h b/cpu/mpc824x/drivers/dma/dma_export.h
deleted file mode 100644
index 471e488..0000000
--- a/cpu/mpc824x/drivers/dma/dma_export.h
+++ /dev/null
@@ -1,100 +0,0 @@
-#ifndef DMA_EXPORT_H
-#define DMA_EXPORT_H
-
-/****************************************************
- * $Id:
- *
- * Copyright Motorola 1999
- *
- * $Log:
- *
- ****************************************************/
-
-/* These are the defined return values for the DMA_* functions.
- * Any non-zero value indicates failure. Failure modes can be added for
- * more detailed error reporting.
- */
-typedef enum _dma_status
-{
- DMA_SUCCESS = 0,
- DMA_ERROR,
-} DMA_Status;
-
-/* These are the defined channel transfer types. */
-typedef enum _dma_transfer_types
-{
- DMA_M2M = 0, /* local memory to local memory */
- DMA_M2P = 1, /* local memory to PCI */
- DMA_P2M = 2, /* PCI to local memory */
- DMA_P2P = 3, /* PCI to PCI */
-} DMA_TRANSFER_TYPE;
-
-typedef enum _dma_interrupt_steer
-{
- DMA_INT_STEER_LOCAL = 0, /* steer DMA int to local processor */
- DMA_INT_STEER_PCI = 1, /* steer DMA int to PCI bus through INTA_ */
-} DMA_INTERRUPT_STEER;
-
-typedef enum _dma_channel
-{
- DMA_CHN_0 = 0, /* kahlua has two dma channels: 0 and 1 */
- DMA_CHN_1 = 1,
-} DMA_CHANNEL;
-
-typedef enum _dma_snoop_mode
-{
- DMA_SNOOP_DISABLE = 0,
- DMA_SNOOP_ENABLE = 1,
-} DMA_SNOOP_MODE;
-
-/******************** App. API ********************
- * The application API is for user level application
- * to use the functionality provided by DMA driver.
- * This is a "generic" DMA interface, it should contain
- * nothing specific to the Kahlua implementation.
- * Only the generic functions are exported by the library.
- *
- * Note: Its App.s responsibility to swap the data
- * byte. In our API, we currently transfer whatever
- * we are given - Big/Little Endian. This could
- * become part of the DMA config, though.
- **************************************************/
-
-
-/* Initialize DMA unit with the following:
- * optional pointer to application layer print function
- *
- * These parameters may be added:
- * ???
- * Interrupt enables, modes, etc. are set for each transfer.
- *
- * This function must be called before DMA unit can be used.
- */
-extern DMA_Status DMA_Initialize(
- int (*app_print_function)(char *,...)); /* pointer to optional "printf"
- * provided by application
- */
-
-/* Perform the DMA transfer, only direct mode is currently implemented.
- * At this point, I think it would be better to define a different
- * function for chaining mode.
- * Also, I'm not sure if it is appropriate to have the "generic" API
- * accept snoop and int_steer parameters. The DINK user interface allows
- * them, so for now I'll leave them.
- *
- * int_steer controls DMA interrupt steering to PCI or local processor
- * type is the type of transfer: M2M, M2P, P2M, P2P
- * source is the source address of the data
- * dest is the destination address of the data
- * len is the length of data to transfer
- * channel is the DMA channel to use for the transfer
- * snoop is the snoop enable control
- */
-extern DMA_Status DMA_direct_transfer( DMA_INTERRUPT_STEER int_steer,
- DMA_TRANSFER_TYPE type,
- unsigned int source,
- unsigned int dest,
- unsigned int len,
- DMA_CHANNEL channel,
- DMA_SNOOP_MODE snoop);
-#endif
diff --git a/cpu/mpc824x/drivers/dma_export.h b/cpu/mpc824x/drivers/dma_export.h
deleted file mode 100644
index 471e488..0000000
--- a/cpu/mpc824x/drivers/dma_export.h
+++ /dev/null
@@ -1,100 +0,0 @@
-#ifndef DMA_EXPORT_H
-#define DMA_EXPORT_H
-
-/****************************************************
- * $Id:
- *
- * Copyright Motorola 1999
- *
- * $Log:
- *
- ****************************************************/
-
-/* These are the defined return values for the DMA_* functions.
- * Any non-zero value indicates failure. Failure modes can be added for
- * more detailed error reporting.
- */
-typedef enum _dma_status
-{
- DMA_SUCCESS = 0,
- DMA_ERROR,
-} DMA_Status;
-
-/* These are the defined channel transfer types. */
-typedef enum _dma_transfer_types
-{
- DMA_M2M = 0, /* local memory to local memory */
- DMA_M2P = 1, /* local memory to PCI */
- DMA_P2M = 2, /* PCI to local memory */
- DMA_P2P = 3, /* PCI to PCI */
-} DMA_TRANSFER_TYPE;
-
-typedef enum _dma_interrupt_steer
-{
- DMA_INT_STEER_LOCAL = 0, /* steer DMA int to local processor */
- DMA_INT_STEER_PCI = 1, /* steer DMA int to PCI bus through INTA_ */
-} DMA_INTERRUPT_STEER;
-
-typedef enum _dma_channel
-{
- DMA_CHN_0 = 0, /* kahlua has two dma channels: 0 and 1 */
- DMA_CHN_1 = 1,
-} DMA_CHANNEL;
-
-typedef enum _dma_snoop_mode
-{
- DMA_SNOOP_DISABLE = 0,
- DMA_SNOOP_ENABLE = 1,
-} DMA_SNOOP_MODE;
-
-/******************** App. API ********************
- * The application API is for user level application
- * to use the functionality provided by DMA driver.
- * This is a "generic" DMA interface, it should contain
- * nothing specific to the Kahlua implementation.
- * Only the generic functions are exported by the library.
- *
- * Note: Its App.s responsibility to swap the data
- * byte. In our API, we currently transfer whatever
- * we are given - Big/Little Endian. This could
- * become part of the DMA config, though.
- **************************************************/
-
-
-/* Initialize DMA unit with the following:
- * optional pointer to application layer print function
- *
- * These parameters may be added:
- * ???
- * Interrupt enables, modes, etc. are set for each transfer.
- *
- * This function must be called before DMA unit can be used.
- */
-extern DMA_Status DMA_Initialize(
- int (*app_print_function)(char *,...)); /* pointer to optional "printf"
- * provided by application
- */
-
-/* Perform the DMA transfer, only direct mode is currently implemented.
- * At this point, I think it would be better to define a different
- * function for chaining mode.
- * Also, I'm not sure if it is appropriate to have the "generic" API
- * accept snoop and int_steer parameters. The DINK user interface allows
- * them, so for now I'll leave them.
- *
- * int_steer controls DMA interrupt steering to PCI or local processor
- * type is the type of transfer: M2M, M2P, P2M, P2P
- * source is the source address of the data
- * dest is the destination address of the data
- * len is the length of data to transfer
- * channel is the DMA channel to use for the transfer
- * snoop is the snoop enable control
- */
-extern DMA_Status DMA_direct_transfer( DMA_INTERRUPT_STEER int_steer,
- DMA_TRANSFER_TYPE type,
- unsigned int source,
- unsigned int dest,
- unsigned int len,
- DMA_CHANNEL channel,
- DMA_SNOOP_MODE snoop);
-#endif
diff --git a/cpu/mpc824x/drivers/i2o.h b/cpu/mpc824x/drivers/i2o.h
deleted file mode 100644
index c47253d..0000000
--- a/cpu/mpc824x/drivers/i2o.h
+++ /dev/null
@@ -1,344 +0,0 @@
-#ifndef I2O_H
-#define I2O_H
-/*********************************************************
- *
- * copyright @ Motorola, 1999
- *********************************************************/
-
-#define I2O_REG_OFFSET 0x0004
-
-#define PCI_CFG_CLA 0x0B
-#define PCI_CFG_SCL 0x0A
-#define PCI_CFG_PIC 0x09
-
-#define I2O_IMR0 0x0050
-#define I2O_IMR1 0x0054
-#define I2O_OMR0 0x0058
-#define I2O_OMR1 0x005C
-
-#define I2O_ODBR 0x0060
-#define I2O_IDBR 0x0068
-
-#define I2O_OMISR 0x0030
-#define I2O_OMIMR 0x0034
-#define I2O_IMISR 0x0100
-#define I2O_IMIMR 0x0104
-
-/* accessable to PCI master but local processor */
-#define I2O_IFQPR 0x0040
-#define I2O_OFQPR 0x0044
-
-/* accessable to local processor */
-#define I2O_IFHPR 0x0120
-#define I2O_IFTPR 0x0128
-#define I2O_IPHPR 0x0130
-#define I2O_IPTPR 0x0138
-#define I2O_OFHPR 0x0140
-#define I2O_OFTPR 0x0148
-#define I2O_OPHPR 0x0150
-#define I2O_OPTPR 0x0158
-#define I2O_MUCR 0x0164
-#define I2O_QBAR 0x0170
-
-#define I2O_NUM_MSG 2
-
-typedef enum _i2o_status
-{
- I2OSUCCESS = 0,
- I2OINVALID,
- I2OMSGINVALID,
- I2ODBINVALID,
- I2OQUEINVALID,
- I2OQUEEMPTY,
- I2OQUEFULL,
- I2ONOEVENT,
-} I2OSTATUS;
-
-typedef enum _queue_size
-{
- QSIZE_4K = 0x02,
- QSIZE_8K = 0x04,
- QSIZE_16K = 0x08,
- QSIZE_32K = 0x10,
- QSIZe_64K = 0x20,
-} QUEUE_SIZE;
-
-typedef enum _location
-{
- LOCAL = 0, /* used by local processor to access its own on board device,
- local processor's eumbbar is required */
- REMOTE, /* used by PCI master to access the devices on its PCI device,
- device's pcsrbar is required */
-} LOCATION;
-
-/* door bell */
-typedef enum _i2o_in_db
-{
- IN_DB = 1,
- MC, /* machine check */
-} I2O_IN_DB;
-
-/* I2O PCI configuration identification */
-typedef struct _i2o_iop
-{
- unsigned int base_class : 8;
- unsigned int sub_class : 8;
- unsigned int prg_code : 8;
-} I2OIOP;
-
-/* I2O Outbound Message Interrupt Status Register */
-typedef struct _i2o_om_stat
-{
- unsigned int rsvd0 : 26;
- unsigned int opqi : 1;
- unsigned int rsvd1 : 1;
- unsigned int odi : 1;
- unsigned int rsvd2 : 1;
- unsigned int om1i : 1;
- unsigned int om0i : 1;
-} I2OOMSTAT;
-
-/* I2O inbound Message Interrupt Status Register */
-typedef struct _i2o_im_stat
-{
- unsigned int rsvd0 : 23;
- unsigned int ofoi : 1;
- unsigned int ipoi : 1;
- unsigned int rsvd1 : 1;
- unsigned int ipqi : 1;
- unsigned int mci : 1;
- unsigned int idi : 1;
- unsigned int rsvd2 : 1;
- unsigned int im1i : 1;
- unsigned int im0i : 1;
-} I2OIMSTAT;
-
-/**
- Enable the interrupt associated with in/out bound msg
-
- Inbound message interrupt generated by PCI master and serviced by local processor
- local processor needs to enable its inbound interrupts it wants to handle (LOCAL)
-
- Outbound message interrupt generated by local processor and serviced by PCI master
- PCI master needs to enable the devices' outbound interrupts it wants to handle (REMOTE)
- **/
-extern I2OSTATUS I2OMsgEnable( LOCATION, /* REMOTE/LOCAL */
- unsigned int base, /* pcsrbar/eumbbar */
- unsigned char n ); /* b'1' - msg 0
- * b'10'- msg 1
- * b'11'- both
- */
-
-/**
- Disable the interrupt associated with in/out bound msg
-
- local processor needs to disable its inbound interrupts it is not interested (LOCAL)
-
- PCI master needs to disable outbound interrupts of devices it is not interested (REMOTE)
- **/
-extern I2OSTATUS I2OMsgDisable( LOCATION, /* REMOTE/LOCAL */
- unsigned int base, /* pcsrbar/eumbbar */
- unsigned char n ); /* b'1' - msg 0
- * b'10'- msg 1
- * b'11'- both
- */
-
-/**
- Read the msg register either from local inbound msg 0/1,
- or an outbound msg 0/1 of devices.
-
- If it is not local, pcsrbar must be passed to the function.
- Otherwise eumbbar is passed.
-
- If it is remote, outbound msg of the device is read.
- Otherwise local inbound msg is read.
- **/
-extern I2OSTATUS I2OMsgGet ( LOCATION, /* REMOTE/LOCAL */
- unsigned int base, /*pcsrbar/eumbbar */
- unsigned int n, /* 0 or 1 */
- unsigned int *msg );
-
-/**
- Write to nth Msg register either on local outbound msg 0/1,
- or aninbound msg 0/1 of devices
-
- If it is not local, pcsrbar must be passed to the function.
- Otherwise eumbbar is passed.
-
- If it is remote, inbound msg on the device is written.
- Otherwise local outbound msg is written.
- **/
-extern I2OSTATUS I2OMsgPost( LOCATION, /* REMOTE/LOCAL */
- unsigned int base, /*pcsrbar/eumbbar */
- unsigned int n, /* 0 or 1 */
- unsigned int msg );
-
-/**
- Enable the In/Out DoorBell Interrupt
-
- InDoorBell interrupt is generated by PCI master and serviced by local processor
- local processor needs to enable its inbound doorbell interrupts it wants to handle
-
- OutDoorbell interrupt is generated by local processor and serviced by PCI master
- PCI master needs to enable outbound doorbell interrupts of the devices it wants to handle
- **/
-extern I2OSTATUS I2ODBEnable( LOCATION, /* REMOTE/LOCAL */
- unsigned int base, /* pcsrbar/eumbbar */
- unsigned int in_db );/* when LOCAL, I2O_IN_DB, MC, I2O_IN_DB|MC */
-
-/**
- Disable the In/Out DoorBell Interrupt
-
- local processor needs to disable its inbound doorbell interrupts it is not interested
-
- PCI master needs to disable outbound doorbell interrupts of devices it is not interested
-
- **/
-extern I2OSTATUS I2ODBDisable( LOCATION, /* REMOTE/LOCAL */
- unsigned int base, /* pcsrbar/eumbbar */
- unsigned int in_db ); /* when LOCAL, I2O_IN_DB, MC, I2O_IN_DB|MC */
-
-/**
- Read a local indoorbell register, or an outdoorbell of devices.
- Reading a doorbell register, the register will be cleared.
-
- If it is not local, pcsrbar must be passed to the function.
- Otherwise eumbbar is passed.
-
- If it is remote, outdoorbell register on the device is read.
- Otherwise local in doorbell is read
- **/
-extern unsigned int I2ODBGet( LOCATION, /* REMOTE/LOCAL */
- unsigned int base); /* pcsrbar/eumbbar */
-
-/**
- Write to a local outdoorbell register, or an indoorbell register of devices.
-
- If it is not local, pcsrbar must be passed to the function.
- Otherwise eumbbar is passed.
-
- If it is remote, in doorbell register on the device is written.
- Otherwise local out doorbell is written
- **/
-extern void I2ODBPost( LOCATION, /* REMOTE/LOCAL */
- unsigned int base, /* pcsrbar/eumbbar */
- unsigned int msg ); /* in / out */
-
-/**
- Read the outbound msg unit interrupt status of devices. Reading an interrupt status register,
- the register will be cleared.
-
- The outbound interrupt status is AND with the outbound
- interrupt mask. The result is returned.
-
- PCI master must pass the pcsrbar to the function.
- **/
-extern I2OSTATUS I2OOutMsgStatGet( unsigned int pcsrbar, I2OOMSTAT * );
-
-/**
- Read the inbound msg unit interrupt status. Reading an interrupt status register,
- the register will be cleared.
-
- The inbound interrupt status is AND with the inbound
- interrupt mask. The result is returned.
-
- Local process must pass its eumbbar to the function.
-**/
-extern I2OSTATUS I2OInMsgStatGet( unsigned int eumbbar, I2OIMSTAT * );
-
-/**
- Configure the I2O FIFO, including QBAR, IFHPR/IFTPR,IPHPR/IPTPR,OFHPR/OFTPR, OPHPR/OPTPR,
- MUCR.
- **/
-extern I2OSTATUS I2OFIFOInit( unsigned int eumbbar,
- QUEUE_SIZE,
- unsigned int qba);/* queue base address that must be aligned at 1M */
-/**
- Enable the circular queue
- **/
-extern I2OSTATUS I2OFIFOEnable( unsigned int eumbbar );
-
-/**
- Disable the circular queue
- **/
-extern void I2OFIFODisable( unsigned int eumbbar );
-
-/**
- Enable the circular queue interrupt
- PCI master enables outbound FIFO interrupt of device
- Device enables its inbound FIFO interrupt
- **/
-extern void I2OFIFOIntEnable( LOCATION, unsigned int base );
-
-/**
- Disable the circular queue interrupt
- PCI master disables outbound FIFO interrupt of device
- Device disables its inbound FIFO interrupt
- **/
-extern void I2OFIFOIntDisable( LOCATION, unsigned int base );
-
-/**
- Enable the circular queue overflow interrupt
- **/
-extern void I2OFIFOOverflowIntEnable( unsigned int eumbbar );
-
-/**
- Disable the circular queue overflow interrupt
- **/
-extern void I2OFIFOOverflowIntDisable( unsigned int eumbbar );
-
-/**
- Allocate a free msg frame from free FIFO.
-
- PCI Master allocates a free msg frame through inbound queue port of device(IFQPR)
- while local processor allocates a free msg frame from outbound free queue(OFTPR)
-
- Unless both free queues are initialized, allocating a free MF will return 0xffffffff
- **/
-extern I2OSTATUS I2OFIFOAlloc( LOCATION,
- unsigned int base,
- void **pMsg);
-/**
- Free a used msg frame back to free queue
- PCI Master frees a MFA through outbound queue port of device(OFQPR)
- while local processor frees a MFA into its inbound free queue(IFHPR)
-
- Used msg frame does not need to be recycled in the order they
- read
-
- This function has to be called by PCI master to initialize Inbound free queue
- and by device to initialize Outbound free queue before I2OFIFOAlloc can be used.
- **/
-extern I2OSTATUS I2OFIFOFree( LOCATION,
- unsigned int base,
- void *pMsg );
-
-/**
- Post a msg into FIFO
- PCI Master posts a msg through inbound queue port of device(IFQPR)
- while local processor post a msg into its outbound post queue(OPHPR)
-
- The total number of msg must be less than the max size of the queue
- Otherwise queue overflow interrupt will assert.
- **/
-extern I2OSTATUS I2OFIFOPost( LOCATION,
- unsigned int base,
- void *pMsg );
-
-/**
- Read a msg from FIFO
- PCI Master reads a msg through outbound queue port of device(OFQPR)
- while local processor reads a msg from its inbound post queue(IPTPR)
- **/
-extern I2OSTATUS I2OFIFOGet( LOCATION,
- unsigned int base,
- void **pMsg );
-
-/**
- Get the I2O PCI configuration identification register
- **/
-extern I2OSTATUS I2OPCIConfigGet( LOCATION,
- unsigned int base,
- I2OIOP *);
-
-#endif
diff --git a/cpu/mpc824x/drivers/i2o/Makefile b/cpu/mpc824x/drivers/i2o/Makefile
deleted file mode 100644
index 3f5ca26..0000000
--- a/cpu/mpc824x/drivers/i2o/Makefile
+++ /dev/null
@@ -1,84 +0,0 @@
-##########################################################################
-#
-# Copyright Motorola, Inc. 1997
-# ALL RIGHTS RESERVED
-#
-# You are hereby granted a copyright license to use, modify, and
-# distribute the SOFTWARE so long as this entire notice is retained
-# without alteration in any modified and/or redistributed versions,
-# and that such modified versions are clearly identified as such.
-# No licenses are granted by implication, estoppel or otherwise under
-# any patents or trademarks of Motorola, Inc.
-#
-# The SOFTWARE is provided on an "AS IS" basis and without warranty.
-# To the maximum extent permitted by applicable law, MOTOROLA DISCLAIMS
-# ALL WARRANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING IMPLIED
-# WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
-# PURPOSE AND ANY WARRANTY AGAINST INFRINGEMENT WITH
-# REGARD TO THE SOFTWARE (INCLUDING ANY MODIFIED VERSIONS
-# THEREOF) AND ANY ACCOMPANYING WRITTEN MATERIALS.
-#
-# To the maximum extent permitted by applicable law, IN NO EVENT SHALL
-# MOTOROLA BE LIABLE FOR ANY DAMAGES WHATSOEVER
-# (INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF
-# BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS
-# INFORMATION, OR OTHER PECUNIARY LOSS) ARISING OF THE USE OR
-# INABILITY TO USE THE SOFTWARE.
-#
-############################################################################
-TARGET = libi2o.a
-
-#DEBUG = -g
-DEBUG =
-LST = -Hanno -S
-OPTIM =
-CC = /risc/tools/pkgs/metaware/bin/hcppc
-CFLAGS = -Hnocopyr -c -Hsds -Hon=Char_default_unsigned -Hon=Char_is_rep -I../inc -I/risc/tools/pkgs/metaware/inc
-CCobj = $(CC) $(CFLAGS) $(DEBUG) $(OPTIM)
-PREP = $(CC) $(CFLAGS) -P
-
-# Assembler used to build the .s files (for the board version)
-
-ASOPT = -big_si -c
-ASDEBUG = -l -fm
-AS = /risc/tools/pkgs/metaware/bin/asppc
-
-# Linker to bring .o files together into an executable.
-
-LKOPT = -Bbase=0 -Qn -q -r
-LKCMD =
-LINK = /risc/tools/pkgs/metaware/bin/ldppc $(LKCMD) $(LKOPT)
-
-# DOS Utilities
-
-DEL = rm
-COPY = cp
-LIST = ls
-
-OBJECTS = i2o1.o i2o2.o
-
-all: $(TARGET)
-
-$(TARGET): $(OBJECTS)
- $(LINK) $(OBJECTS) -o $@
-
-objects: i2o1.o
-
-clean:
- $(DEL) -f *.o *.i *.map *.lst $(TARGET) $(OBJECTS)
-
-.s.o:
- $(DEL) -f $*.i
- $(PREP) -Hasmcpp $<
- $(AS) $(ASOPT) $*.i
-# $(AS) $(ASOPT) $(ASDEBUG) $*.i > $*.lst
-
-.c.o:
- $(CCobj) $<
-
-.c.s:
- $(CCobj) $(LST) $<
-
-i2o1.o: i2o.h i2o1.c
-
-i2o2.o: i2o.h i2o2.s
diff --git a/cpu/mpc824x/drivers/i2o/Makefile_pc b/cpu/mpc824x/drivers/i2o/Makefile_pc
deleted file mode 100644
index 6867f58..0000000
--- a/cpu/mpc824x/drivers/i2o/Makefile_pc
+++ /dev/null
@@ -1,90 +0,0 @@
-##########################################################################
-#
-# makefile_pc for use with PC mksnt tools dink32/drivers/i2o
-#
-# Copyright Motorola, Inc. 1997
-# ALL RIGHTS RESERVED
-#
-# You are hereby granted a copyright license to use, modify, and
-# distribute the SOFTWARE so long as this entire notice is retained
-# without alteration in any modified and/or redistributed versions,
-# and that such modified versions are clearly identified as such.
-# No licenses are granted by implication, estoppel or otherwise under
-# any patents or trademarks of Motorola, Inc.
-#
-# The SOFTWARE is provided on an "AS IS" basis and without warranty.
-# To the maximum extent permitted by applicable law, MOTOROLA DISCLAIMS
-# ALL WARRANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING IMPLIED
-# WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
-# PURPOSE AND ANY WARRANTY AGAINST INFRINGEMENT WITH
-# REGARD TO THE SOFTWARE (INCLUDING ANY MODIFIED VERSIONS
-# THEREOF) AND ANY ACCOMPANYING WRITTEN MATERIALS.
-#
-# To the maximum extent permitted by applicable law, IN NO EVENT SHALL
-# MOTOROLA BE LIABLE FOR ANY DAMAGES WHATSOEVER
-# (INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF
-# BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS
-# INFORMATION, OR OTHER PECUNIARY LOSS) ARISING OF THE USE OR
-# INABILITY TO USE THE SOFTWARE.
-#
-############################################################################
-TARGET = libi2o.a
-
-#DEBUG = -g
-DEBUG =
-LST = -Hanno -S
-OPTIM =
-CC = m:/old_tools/tools/hcppc/bin/hcppc
-CFLAGS = -Hnocopyr -c -Hsds -Hon=Char_default_unsigned -Hon=Char_is_rep -I../inc -I/risc/tools/pkgs/metaware/inc
-CCobj = $(CC) $(CFLAGS) $(DEBUG) $(OPTIM)
-PREP = $(CC) $(CFLAGS) -P
-
-# Assembler used to build the .s files (for the board version)
-
-ASOPT = -big_si -c
-ASDEBUG = -l -fm
-AS = m:/old_tools/tools/hcppc/bin/asppc
-
-# Linker to bring .o files together into an executable.
-
-LKOPT = -Bbase=0 -Qn -q -r
-LKCMD =
-LINK = m:/old_tools/tools/hcppc/bin/ldppc $(LKCMD) $(LKOPT)
-
-# DOS Utilities
-
-DEL = rm
-COPY = cp
-LIST = ls
-
-OBJECTS = i2o1.o i2o2.o
-
-all: $(TARGET)
-
-$(TARGET): $(OBJECTS)
- $(LINK) $(OBJECTS) -o $@
-
-objects: i2o1.o
-
-clean:
- $(DEL) -f *.o *.i *.map *.lst $(TARGET) $(OBJECTS)
-
-.s.o:
- $(DEL) -f $*.i
- $(PREP) -Hasmcpp $<
- $(AS) $(ASOPT) $*.i
-# $(AS) $(ASOPT) $(ASDEBUG) $*.i > $*.lst
-
-.c.o:
- $(CCobj) $<
-
-.c.s:
- $(CCobj) $(LST) $<
-
-i2o1.o: i2o.h i2o1.c
- $(CCobj) $<
-
-i2o2.o: i2o.h i2o2.s
- $(DEL) -f $*.i
- $(PREP) -Hasmcpp $<
- $(AS) $(ASOPT) $*.i
diff --git a/cpu/mpc824x/drivers/i2o/i2o.h b/cpu/mpc824x/drivers/i2o/i2o.h
deleted file mode 100644
index 71572b2..0000000
--- a/cpu/mpc824x/drivers/i2o/i2o.h
+++ /dev/null
@@ -1,345 +0,0 @@
-#ifndef I2O_H
-#define I2O_H
-/*********************************************************
- *
- * copyright @ Motorola, 1999
- *
- *********************************************************/
-
-#define I2O_REG_OFFSET 0x0004
-
-#define PCI_CFG_CLA 0x0B
-#define PCI_CFG_SCL 0x0A
-#define PCI_CFG_PIC 0x09
-
-#define I2O_IMR0 0x0050
-#define I2O_IMR1 0x0054
-#define I2O_OMR0 0x0058
-#define I2O_OMR1 0x005C
-
-#define I2O_ODBR 0x0060
-#define I2O_IDBR 0x0068
-
-#define I2O_OMISR 0x0030
-#define I2O_OMIMR 0x0034
-#define I2O_IMISR 0x0100
-#define I2O_IMIMR 0x0104
-
-/* accessable to PCI master but local processor */
-#define I2O_IFQPR 0x0040
-#define I2O_OFQPR 0x0044
-
-/* accessable to local processor */
-#define I2O_IFHPR 0x0120
-#define I2O_IFTPR 0x0128
-#define I2O_IPHPR 0x0130
-#define I2O_IPTPR 0x0138
-#define I2O_OFHPR 0x0140
-#define I2O_OFTPR 0x0148
-#define I2O_OPHPR 0x0150
-#define I2O_OPTPR 0x0158
-#define I2O_MUCR 0x0164
-#define I2O_QBAR 0x0170
-
-#define I2O_NUM_MSG 2
-
-typedef enum _i2o_status
-{
- I2OSUCCESS = 0,
- I2OINVALID,
- I2OMSGINVALID,
- I2ODBINVALID,
- I2OQUEINVALID,
- I2OQUEEMPTY,
- I2OQUEFULL,
- I2ONOEVENT,
-} I2OSTATUS;
-
-typedef enum _queue_size
-{
- QSIZE_4K = 0x02,
- QSIZE_8K = 0x04,
- QSIZE_16K = 0x08,
- QSIZE_32K = 0x10,
- QSIZe_64K = 0x20,
-} QUEUE_SIZE;
-
-typedef enum _location
-{
- LOCAL = 0, /* used by local processor to access its own on board device,
- local processor's eumbbar is required */
- REMOTE, /* used by PCI master to access the devices on its PCI device,
- device's pcsrbar is required */
-} LOCATION;
-
-/* door bell */
-typedef enum _i2o_in_db
-{
- IN_DB = 1,
- MC, /* machine check */
-} I2O_IN_DB;
-
-/* I2O PCI configuration identification */
-typedef struct _i2o_iop
-{
- unsigned int base_class : 8;
- unsigned int sub_class : 8;
- unsigned int prg_code : 8;
-} I2OIOP;
-
-/* I2O Outbound Message Interrupt Status Register */
-typedef struct _i2o_om_stat
-{
- unsigned int rsvd0 : 26;
- unsigned int opqi : 1;
- unsigned int rsvd1 : 1;
- unsigned int odi : 1;
- unsigned int rsvd2 : 1;
- unsigned int om1i : 1;
- unsigned int om0i : 1;
-} I2OOMSTAT;
-
-/* I2O inbound Message Interrupt Status Register */
-typedef struct _i2o_im_stat
-{
- unsigned int rsvd0 : 23;
- unsigned int ofoi : 1;
- unsigned int ipoi : 1;
- unsigned int rsvd1 : 1;
- unsigned int ipqi : 1;
- unsigned int mci : 1;
- unsigned int idi : 1;
- unsigned int rsvd2 : 1;
- unsigned int im1i : 1;
- unsigned int im0i : 1;
-} I2OIMSTAT;
-
-/**
- Enable the interrupt associated with in/out bound msg
-
- Inbound message interrupt generated by PCI master and serviced by local processor
- local processor needs to enable its inbound interrupts it wants to handle (LOCAL)
-
- Outbound message interrupt generated by local processor and serviced by PCI master
- PCI master needs to enable the devices' outbound interrupts it wants to handle (REMOTE)
- **/
-extern I2OSTATUS I2OMsgEnable( LOCATION, /* REMOTE/LOCAL */
- unsigned int base, /* pcsrbar/eumbbar */
- unsigned char n ); /* b'1' - msg 0
- * b'10'- msg 1
- * b'11'- both
- */
-
-/**
- Disable the interrupt associated with in/out bound msg
-
- local processor needs to disable its inbound interrupts it is not interested (LOCAL)
-
- PCI master needs to disable outbound interrupts of devices it is not interested (REMOTE)
- **/
-extern I2OSTATUS I2OMsgDisable( LOCATION, /* REMOTE/LOCAL */
- unsigned int base, /* pcsrbar/eumbbar */
- unsigned char n ); /* b'1' - msg 0
- * b'10'- msg 1
- * b'11'- both
- */
-
-/**
- Read the msg register either from local inbound msg 0/1,
- or an outbound msg 0/1 of devices.
-
- If it is not local, pcsrbar must be passed to the function.
- Otherwise eumbbar is passed.
-
- If it is remote, outbound msg of the device is read.
- Otherwise local inbound msg is read.
- **/
-extern I2OSTATUS I2OMsgGet ( LOCATION, /* REMOTE/LOCAL */
- unsigned int base, /*pcsrbar/eumbbar */
- unsigned int n, /* 0 or 1 */
- unsigned int *msg );
-
-/**
- Write to nth Msg register either on local outbound msg 0/1,
- or aninbound msg 0/1 of devices
-
- If it is not local, pcsrbar must be passed to the function.
- Otherwise eumbbar is passed.
-
- If it is remote, inbound msg on the device is written.
- Otherwise local outbound msg is written.
- **/
-extern I2OSTATUS I2OMsgPost( LOCATION, /* REMOTE/LOCAL */
- unsigned int base, /*pcsrbar/eumbbar */
- unsigned int n, /* 0 or 1 */
- unsigned int msg );
-
-/**
- Enable the In/Out DoorBell Interrupt
-
- InDoorBell interrupt is generated by PCI master and serviced by local processor
- local processor needs to enable its inbound doorbell interrupts it wants to handle
-
- OutDoorbell interrupt is generated by local processor and serviced by PCI master
- PCI master needs to enable outbound doorbell interrupts of the devices it wants to handle
- **/
-extern I2OSTATUS I2ODBEnable( LOCATION, /* REMOTE/LOCAL */
- unsigned int base, /* pcsrbar/eumbbar */
- unsigned int in_db );/* when LOCAL, I2O_IN_DB, MC, I2O_IN_DB|MC */
-
-/**
- Disable the In/Out DoorBell Interrupt
-
- local processor needs to disable its inbound doorbell interrupts it is not interested
-
- PCI master needs to disable outbound doorbell interrupts of devices it is not interested
-
- **/
-extern I2OSTATUS I2ODBDisable( LOCATION, /* REMOTE/LOCAL */
- unsigned int base, /* pcsrbar/eumbbar */
- unsigned int in_db ); /* when LOCAL, I2O_IN_DB, MC, I2O_IN_DB|MC */
-
-/**
- Read a local indoorbell register, or an outdoorbell of devices.
- Reading a doorbell register, the register will be cleared.
-
- If it is not local, pcsrbar must be passed to the function.
- Otherwise eumbbar is passed.
-
- If it is remote, outdoorbell register on the device is read.
- Otherwise local in doorbell is read
- **/
-extern unsigned int I2ODBGet( LOCATION, /* REMOTE/LOCAL */
- unsigned int base); /* pcsrbar/eumbbar */
-
-/**
- Write to a local outdoorbell register, or an indoorbell register of devices.
-
- If it is not local, pcsrbar must be passed to the function.
- Otherwise eumbbar is passed.
-
- If it is remote, in doorbell register on the device is written.
- Otherwise local out doorbell is written
- **/
-extern void I2ODBPost( LOCATION, /* REMOTE/LOCAL */
- unsigned int base, /* pcsrbar/eumbbar */
- unsigned int msg ); /* in / out */
-
-/**
- Read the outbound msg unit interrupt status of devices. Reading an interrupt status register,
- the register will be cleared.
-
- The outbound interrupt status is AND with the outbound
- interrupt mask. The result is returned.
-
- PCI master must pass the pcsrbar to the function.
- **/
-extern I2OSTATUS I2OOutMsgStatGet( unsigned int pcsrbar, I2OOMSTAT * );
-
-/**
- Read the inbound msg unit interrupt status. Reading an interrupt status register,
- the register will be cleared.
-
- The inbound interrupt status is AND with the inbound
- interrupt mask. The result is returned.
-
- Local process must pass its eumbbar to the function.
-**/
-extern I2OSTATUS I2OInMsgStatGet( unsigned int eumbbar, I2OIMSTAT * );
-
-/**
- Configure the I2O FIFO, including QBAR, IFHPR/IFTPR,IPHPR/IPTPR,OFHPR/OFTPR, OPHPR/OPTPR,
- MUCR.
- **/
-extern I2OSTATUS I2OFIFOInit( unsigned int eumbbar,
- QUEUE_SIZE,
- unsigned int qba);/* queue base address that must be aligned at 1M */
-/**
- Enable the circular queue
- **/
-extern I2OSTATUS I2OFIFOEnable( unsigned int eumbbar );
-
-/**
- Disable the circular queue
- **/
-extern void I2OFIFODisable( unsigned int eumbbar );
-
-/**
- Enable the circular queue interrupt
- PCI master enables outbound FIFO interrupt of device
- Device enables its inbound FIFO interrupt
- **/
-extern void I2OFIFOIntEnable( LOCATION, unsigned int base );
-
-/**
- Disable the circular queue interrupt
- PCI master disables outbound FIFO interrupt of device
- Device disables its inbound FIFO interrupt
- **/
-extern void I2OFIFOIntDisable( LOCATION, unsigned int base );
-
-/**
- Enable the circular queue overflow interrupt
- **/
-extern void I2OFIFOOverflowIntEnable( unsigned int eumbbar );
-
-/**
- Disable the circular queue overflow interrupt
- **/
-extern void I2OFIFOOverflowIntDisable( unsigned int eumbbar );
-
-/**
- Allocate a free msg frame from free FIFO.
-
- PCI Master allocates a free msg frame through inbound queue port of device(IFQPR)
- while local processor allocates a free msg frame from outbound free queue(OFTPR)
-
- Unless both free queues are initialized, allocating a free MF will return 0xffffffff
- **/
-extern I2OSTATUS I2OFIFOAlloc( LOCATION,
- unsigned int base,
- void **pMsg);
-/**
- Free a used msg frame back to free queue
- PCI Master frees a MFA through outbound queue port of device(OFQPR)
- while local processor frees a MFA into its inbound free queue(IFHPR)
-
- Used msg frame does not need to be recycled in the order they
- read
-
- This function has to be called by PCI master to initialize Inbound free queue
- and by device to initialize Outbound free queue before I2OFIFOAlloc can be used.
- **/
-extern I2OSTATUS I2OFIFOFree( LOCATION,
- unsigned int base,
- void *pMsg );
-
-/**
- Post a msg into FIFO
- PCI Master posts a msg through inbound queue port of device(IFQPR)
- while local processor post a msg into its outbound post queue(OPHPR)
-
- The total number of msg must be less than the max size of the queue
- Otherwise queue overflow interrupt will assert.
- **/
-extern I2OSTATUS I2OFIFOPost( LOCATION,
- unsigned int base,
- void *pMsg );
-
-/**
- Read a msg from FIFO
- PCI Master reads a msg through outbound queue port of device(OFQPR)
- while local processor reads a msg from its inbound post queue(IPTPR)
- **/
-extern I2OSTATUS I2OFIFOGet( LOCATION,
- unsigned int base,
- void **pMsg );
-
-/**
- Get the I2O PCI configuration identification register
- **/
-extern I2OSTATUS I2OPCIConfigGet( LOCATION,
- unsigned int base,
- I2OIOP *);
-
-#endif
diff --git a/cpu/mpc824x/drivers/i2o/i2o1.c b/cpu/mpc824x/drivers/i2o/i2o1.c
deleted file mode 100644
index f058151..0000000
--- a/cpu/mpc824x/drivers/i2o/i2o1.c
+++ /dev/null
@@ -1,890 +0,0 @@
-/*********************************************************
- * $Id
- *
- * copyright @ Motorola, 1999
- *********************************************************/
-#include "i2o.h"
-
-extern unsigned int load_runtime_reg( unsigned int eumbbar, unsigned int reg );
-#pragma Alias( load_runtime_reg, "load_runtime_reg" );
-
-extern void store_runtime_reg( unsigned int eumbbar, unsigned int reg, unsigned int val );
-#pragma Alias( store_runtime_reg, "store_runtime_reg" );
-
-typedef struct _fifo_stat
-{
- QUEUE_SIZE qsz;
- unsigned int qba;
-} FIFOSTAT;
-
-FIFOSTAT fifo_stat = { QSIZE_4K, 0xffffffff };
-
-/**********************************************************************************
- * function: I2OMsgEnable
- *
- * description: Enable the interrupt associated with in/out bound msg
- * return I2OSUCCESS if no error, otherwise return I2OMSGINVALID.
- *
- * All previously enabled interrupts are preserved.
- * note:
- * Inbound message interrupt generated by PCI master and serviced by local processor
- * Outbound message interrupt generated by local processor and serviced by PCI master
- *
- * local processor needs to enable its inbound interrupts it wants to handle(LOCAL)
- * PCI master needs to enable the outbound interrupts of devices it wants to handle(REMOTE)
- ************************************************************************************/
-I2OSTATUS I2OMsgEnable ( LOCATION loc, /* REMOTE/LOCAL */
- unsigned int base, /* pcsrbar/eumbbar */
- unsigned char n ) /* b'1' - msg 0
- * b'10'- msg 1
- * b'11'- both
- */
-{
- unsigned int reg, val;
- if ( ( n & 0x3 ) == 0 )
- {
- /* neither msg 0, nor msg 1 */
- return I2OMSGINVALID;
- }
-
- n = (~n) & 0x3;
- /* LOCATION - REMOTE : enable outbound message of device, pcsrbar as base
- * LOCAL : enable local inbound message, eumbbar as base
- */
- reg = ( loc == REMOTE ? I2O_OMIMR : I2O_IMIMR );
- val = load_runtime_reg( base, reg );
-
- val &= 0xfffffffc; /* masked out the msg interrupt bits */
- val |= n; /* LSB are the one we want */
- store_runtime_reg( base, reg, val );
-
- return I2OSUCCESS;
-}
-
-/*********************************************************************************
- * function: I2OMsgDisable
- *
- * description: Disable the interrupt associated with in/out bound msg
- * Other previously enabled interrupts are preserved.
- * return I2OSUCCESS if no error otherwise return I2OMSGINVALID
- *
- * note:
- * local processor needs to disable its inbound interrupts it is not interested(LOCAL)
- * PCI master needs to disable outbound interrupts of devices it is not interested(REMOTE)
- *********************************************************************************/
-I2OSTATUS I2OMsgDisable( LOCATION loc, /* REMOTE/LOCAL */
- unsigned int base, /* pcsrbar/eumbbar */
- unsigned char n ) /* b'1' - msg 0
- * b'10'- msg 1
- * b'11'- both
- */
-{
- unsigned int reg, val;
-
- if ( ( n & 0x3 ) == 0 )
- {
- /* neither msg 0, nor msg 1 */
- return I2OMSGINVALID;
- }
-
- /* LOCATION - REMOTE : disable outbound message interrupt of device, pcsrbar as base
- * LOCAL : disable local inbound message interrupt, eumbbar as base
- */
- reg = ( loc == REMOTE ? I2O_OMIMR : I2O_IMIMR );
- val = load_runtime_reg( base, reg );
-
- val &= 0xfffffffc; /* masked out the msg interrupt bits */
- val |= ( n & 0x3 );
- store_runtime_reg( base, reg, val );
-
- return I2OSUCCESS;
-
-}
-
-/**************************************************************************
- * function: I2OMsgGet
- *
- * description: Local processor reads the nth Msg register from its inbound msg,
- * or a PCI Master reads nth outbound msg from device
- *
- * return I2OSUCCESS if no error, otherwise return I2OMSGINVALID.
- *
- * note:
- * If it is not local, pcsrbar must be passed to the function. Otherwise eumbbar is passed.
- * If it is remote, outbound msg on the device is read; otherwise local inbound msg is read
- *************************************************************************/
-I2OSTATUS I2OMsgGet ( LOCATION loc, /* REMOTE/LOCAL */
- unsigned int base, /*pcsrbar/eumbbar */
- unsigned int n, /* 0 or 1 */
- unsigned int *msg )
-{
- if ( n >= I2O_NUM_MSG || msg == 0 )
- {
- return I2OMSGINVALID;
- }
-
- if ( loc == REMOTE )
- {
- /* read the outbound msg of the device, pcsrbar as base */
- *msg = load_runtime_reg( base, I2O_OMR0+n*I2O_REG_OFFSET );
- }
- else
- {
- /* read the inbound msg sent by PCI master, eumbbar as base */
- *msg = load_runtime_reg( base, I2O_IMR0+n*I2O_REG_OFFSET );
- }
-
- return I2OSUCCESS;
-}
-
-/***************************************************************
- * function: I2OMsgPost
- *
- * description: Kahlua writes to its nth outbound msg register
- * PCI master writes to nth inbound msg register of device
- *
- * return I2OSUCCESS if no error, otherwise return I2OMSGINVALID.
- *
- * note:
- * If it is not local, pcsrbar must be passed to the function. Otherwise eumbbar is passed.
- *
- * If it is remote, inbound msg on the device is written; otherwise local outbound msg is written
- ***************************************************************/
-I2OSTATUS I2OMsgPost( LOCATION loc, /* REMOTE/LOCAL */
- unsigned int base, /*pcsrbar/eumbbar */
- unsigned int n, /* 0 or 1 */
- unsigned int msg )
-{
- if ( n >= I2O_NUM_MSG )
- {
- return I2OMSGINVALID;
- }
-
- if ( loc == REMOTE )
- {
- /* write to the inbound msg register of the device, pcsrbar as base */
- store_runtime_reg( base, I2O_IMR0+n*I2O_REG_OFFSET, msg );
- }
- else
- {
- /* write to the outbound msg register for PCI master to read, eumbbar as base */
- store_runtime_reg( base, I2O_OMR0+n*I2O_REG_OFFSET, msg );
- }
-
- return I2OSUCCESS;
-}
-
-/***********************************************************************
- * function: I2ODBEnable
- *
- * description: Local processor enables it's inbound doorbell interrupt
- * PCI master enables outbound doorbell interrupt of devices
- * Other previously enabled interrupts are preserved.
- * Return I2OSUCCESS if no error otherwise return I2ODBINVALID
- *
- * note:
- * In DoorBell interrupt is generated by PCI master and serviced by local processor
- * Out Doorbell interrupt is generated by local processor and serviced by PCI master
- *
- * Out Doorbell interrupt is generated by local processor and serviced by PCI master
- * PCI master needs to enable the outbound doorbell interrupts of device it wants to handle
- **********************************************************************/
-I2OSTATUS I2ODBEnable( LOCATION loc, /* REMOTE/LOCAL */
- unsigned int base, /* pcsrbar/eumbbar */
- unsigned int in_db ) /* when LOCAL, I2O_IN_DB, MC, I2O_IN_DB|MC */
-{
-
- /* LOCATION - REMOTE : PCI master initializes outbound doorbell message of device
- * LOCAL : Kahlua initializes its inbound doorbell message
- */
- unsigned int val;
-
- if ( loc == LOCAL && ( in_db & 0x3 ) == 0 )
- {
- return I2ODBINVALID;
- }
-
- if ( loc == REMOTE )
- {
- /* pcsrbar is base */
- val = load_runtime_reg( base, I2O_OMIMR );
- val &= 0xfffffff7;
- store_runtime_reg( base, I2O_OMIMR , val );
- }
- else
- {
- /* eumbbar is base */
- val = load_runtime_reg( base, I2O_IMIMR);
- in_db = ( (~in_db) & 0x3 ) << 3;
- val = ( val & 0xffffffe7) | in_db;
- store_runtime_reg( base, I2O_IMIMR, val );
- }
-
- return I2OSUCCESS;
-}
-
-/**********************************************************************************
- * function: I2ODBDisable
- *
- * description: local processor disables its inbound DoorBell Interrupt
- * PCI master disables outbound DoorBell interrupt of device
- * Other previously enabled interrupts are preserved.
- * return I2OSUCCESS if no error.Otherwise return I2ODBINVALID
- *
- * note:
- * local processor needs to disable its inbound doorbell interrupts it is not interested
- *
- * PCI master needs to disable outbound doorbell interrupts of device it is not interested
- ************************************************************************************/
-I2OSTATUS I2ODBDisable( LOCATION loc, /* REMOTE/LOCAL */
- unsigned int base, /* pcsrbar/eumbbar */
- unsigned int in_db ) /* when LOCAL, I2O_IN_DB, MC, I2O_IN_DB|MC */
-{
- /* LOCATION - REMOTE : handle device's out bound message initialization
- * LOCAL : handle local in bound message initialization
- */
- unsigned int val;
-
- if ( loc == LOCAL && ( in_db & 0x3 ) == 0 )
- {
- return I2ODBINVALID;
- }
-
- if ( loc == REMOTE )
- {
- /* pcsrbar is the base */
- val = load_runtime_reg( base, I2O_OMIMR );
- val |= 0x8;
- store_runtime_reg( base, I2O_OMIMR, val );
- }
- else
- {
- val = load_runtime_reg( base, I2O_IMIMR);
- in_db = ( in_db & 0x3 ) << 3;
- val |= in_db;
- store_runtime_reg( base, I2O_IMIMR, val );
- }
-
- return I2OSUCCESS;
-}
-
-/**********************************************************************************
- * function: I2ODBGet
- *
- * description: Local processor reads its in doorbell register,
- * PCI master reads the outdoorbell register of device.
- * After a doorbell register is read, the whole register will be cleared.
- * Otherwise, HW keeps generating interrupt.
- *
- * note:
- * If it is not local, pcsrbar must be passed to the function.
- * Otherwise eumbbar is passed.
- *
- * If it is remote, out doorbell register on the device is read.
- * Otherwise local in doorbell is read
- *
- * If the register is not cleared by write to it, any remaining bit of b'1's
- * will cause interrupt pending.
- *********************************************************************************/
-unsigned int I2ODBGet( LOCATION loc, /* REMOTE/LOCAL */
- unsigned int base) /* pcsrbar/eumbbar */
-{
- unsigned int msg, val;
-
- if ( loc == REMOTE )
- {
- /* read outbound doorbell register of device, pcsrbar is the base */
- val = load_runtime_reg( base, I2O_ODBR );
- msg = val & 0xe0000000;
- store_runtime_reg( base, I2O_ODBR, val ); /* clear the register */
- }
- else
- {
- /* read the inbound doorbell register, eumbbar is the base */
- val = load_runtime_reg( base, I2O_IDBR );
- store_runtime_reg( base, I2O_IDBR, val ); /* clear the register */
- msg = val;
- }
-
- return msg;
-}
-
-/**********************************************************************
- * function: I2ODBPost
- *
- * description: local processor writes to a outbound doorbell register,
- * PCI master writes to the inbound doorbell register of device
- *
- * note:
- * If it is not local, pcsrbar must be passed to the function.
- * Otherwise eumbbar is passed.
- *
- * If it is remote, in doorbell register on the device is written.
- * Otherwise local out doorbell is written
- *********************************************************************/
-void I2ODBPost( LOCATION loc, /* REMOTE/LOCAL */
- unsigned int base, /* pcsrbar/eumbbar */
- unsigned int msg ) /* in / out */
-{
- if ( loc == REMOTE )
- {
- /* write to inbound doorbell register of device, pcsrbar is the base */
- store_runtime_reg( base, I2O_IDBR, msg );
- }
- else
- {
- /* write to local outbound doorbell register, eumbbar is the base */
- store_runtime_reg( base, I2O_ODBR, msg & 0x1fffffff );
- }
-
-}
-
-/********************************************************************
- * function: I2OOutMsgStatGet
- *
- * description: PCI master reads device's outbound msg unit interrupt status.
- * Reading an interrupt status register,
- * the register will be cleared.
- *
- * The value of the status register is AND with the outbound
- * interrupt mask and result is returned.
- *
- * note:
- * pcsrbar must be passed to the function.
- ********************************************************************/
-I2OSTATUS I2OOutMsgStatGet( unsigned int pcsrbar, I2OOMSTAT *val )
-{
- unsigned int stat;
- unsigned int mask;
-
- if ( val == 0 )
- {
- return I2OINVALID;
- }
-
- /* read device's outbound status */
- stat = load_runtime_reg( pcsrbar, I2O_OMISR );
- mask = load_runtime_reg( pcsrbar, I2O_OMIMR );
- store_runtime_reg( pcsrbar, I2O_OMISR, stat & 0xffffffd7);
-
- stat &= mask;
- val->rsvd0 = ( stat & 0xffffffc0 ) >> 6;
- val->opqi = ( stat & 0x00000020 ) >> 5;
- val->rsvd1 = ( stat & 0x00000010 ) >> 4;
- val->odi = ( stat & 0x00000008 ) >> 3;
- val->rsvd2 = ( stat & 0x00000004 ) >> 2;
- val->om1i = ( stat & 0x00000002 ) >> 1;
- val->om0i = ( stat & 0x00000001 );
-
- return I2OSUCCESS;
-}
-
-/********************************************************************
- * function: I2OInMsgStatGet
- *
- * description: Local processor reads its inbound msg unit interrupt status.
- * Reading an interrupt status register,
- * the register will be cleared.
- *
- * The inbound msg interrupt status is AND with the inbound
- * msg interrupt mask and result is returned.
- *
- * note:
- * eumbbar must be passed to the function.
- ********************************************************************/
-I2OSTATUS I2OInMsgStatGet(unsigned int eumbbar, I2OIMSTAT *val)
-{
- unsigned int stat;
- unsigned int mask;
-
- if ( val == 0 )
- {
- return I2OINVALID;
- }
-
- /* read device's outbound status */
- stat = load_runtime_reg( eumbbar, I2O_OMISR );
- mask = load_runtime_reg( eumbbar, I2O_OMIMR );
- store_runtime_reg( eumbbar, I2O_OMISR, stat & 0xffffffe7 );
-
- stat &= mask;
- val->rsvd0 = ( stat & 0xfffffe00 ) >> 9;
- val->ofoi = ( stat & 0x00000100 ) >> 8;
- val->ipoi = ( stat & 0x00000080 ) >> 7;
- val->rsvd1 = ( stat & 0x00000040 ) >> 6;
- val->ipqi = ( stat & 0x00000020 ) >> 5;
- val->mci = ( stat & 0x00000010 ) >> 4;
- val->idi = ( stat & 0x00000008 ) >> 3;
- val->rsvd2 = ( stat & 0x00000004 ) >> 2;
- val->im1i = ( stat & 0x00000002 ) >> 1;
- val->im0i = ( stat & 0x00000001 );
-
- return I2OSUCCESS;
-
-}
-
-/***********************************************************
- * function: I2OFIFOInit
- *
- * description: Configure the I2O FIFO, including QBAR,
- * IFHPR/IFTPR, IPHPR/IPTPR, OFHPR/OFTPR,
- * OPHPR/OPTPR, MUCR.
- *
- * return I2OSUCCESS if no error,
- * otherwise return I2OQUEINVALID
- *
- * note: It is NOT this driver's responsibility of initializing
- * MFA blocks, i.e., FIFO queue itself. The MFA blocks
- * must be initialized before I2O unit can be used.
- ***********************************************************/
-I2OSTATUS I2OFIFOInit( unsigned int eumbbar,
- QUEUE_SIZE sz, /* value of CQS of MUCR */
- unsigned int qba) /* queue base address that must be aligned at 1M */
-{
-
- if ( ( qba & 0xfffff ) != 0 )
- {
- /* QBA must be aligned at 1Mbyte boundary */
- return I2OQUEINVALID;
- }
-
- store_runtime_reg( eumbbar, I2O_QBAR, qba );
- store_runtime_reg( eumbbar, I2O_MUCR, (unsigned int)sz );
- store_runtime_reg( eumbbar, I2O_IFHPR, qba );
- store_runtime_reg( eumbbar, I2O_IFTPR, qba );
- store_runtime_reg( eumbbar, I2O_IPHPR, qba + 1 * ( sz << 11 ));
- store_runtime_reg( eumbbar, I2O_IPTPR, qba + 1 * ( sz << 11 ));
- store_runtime_reg( eumbbar, I2O_OFHPR, qba + 2 * ( sz << 11 ));
- store_runtime_reg( eumbbar, I2O_OFTPR, qba + 2 * ( sz << 11 ));
- store_runtime_reg( eumbbar, I2O_OPHPR, qba + 3 * ( sz << 11 ));
- store_runtime_reg( eumbbar, I2O_OPTPR, qba + 3 * ( sz << 11 ));
-
- fifo_stat.qsz = sz;
- fifo_stat.qba = qba;
-
- return I2OSUCCESS;
-}
-
-/**************************************************
- * function: I2OFIFOEnable
- *
- * description: Enable the circular queue
- * return I2OSUCCESS if no error.
- * Otherwise I2OQUEINVALID is returned.
- *
- * note:
- *************************************************/
-I2OSTATUS I2OFIFOEnable( unsigned int eumbbar )
-{
- unsigned int val;
-
- if ( fifo_stat.qba == 0xfffffff )
- {
- return I2OQUEINVALID;
- }
-
- val = load_runtime_reg( eumbbar, I2O_MUCR );
- store_runtime_reg( eumbbar, I2O_MUCR, val | 0x1 );
-
- return I2OSUCCESS;
-}
-
-/**************************************************
- * function: I2OFIFODisable
- *
- * description: Disable the circular queue
- *
- * note:
- *************************************************/
-void I2OFIFODisable( unsigned int eumbbar )
-{
- if ( fifo_stat.qba == 0xffffffff )
- {
- /* not enabled */
- return;
- }
-
- unsigned int val = load_runtime_reg( eumbbar, I2O_MUCR );
- store_runtime_reg( eumbbar, I2O_MUCR, val & 0xfffffffe );
-}
-
-/****************************************************
- * function: I2OFIFOAlloc
- *
- * description: Allocate a free MFA from free FIFO.
- * return I2OSUCCESS if no error.
- * return I2OQUEEMPTY if no more free MFA.
- * return I2OINVALID on other errors.
- *
- * A free MFA must be allocated before a
- * message can be posted.
- *
- * note:
- * PCI Master allocates a free MFA from inbound queue of device
- * (pcsrbar is the base,) through the inbound queue port of device
- * while local processor allocates a free MFA from its outbound
- * queue (eumbbar is the base.)
- *
- ****************************************************/
-I2OSTATUS I2OFIFOAlloc( LOCATION loc,
- unsigned int base,
- void **pMsg )
-{
- I2OSTATUS stat = I2OSUCCESS;
- void *pHdr, *pTil;
-
- if ( pMsg == 0 || *pMsg == 0 || fifo_stat.qba == 0xffffffff )
- {
- /* not configured */
- return I2OQUEINVALID;
- }
-
- if ( loc == REMOTE )
- {
- /* pcsrbar is the base and read the inbound free tail ptr */
- pTil = (void *)load_runtime_reg( base, I2O_IFQPR );
- if ( ( (unsigned int)pTil & 0xFFFFFFF ) == 0xFFFFFFFF )
- {
- stat = I2OQUEEMPTY;
- }
- else
- {
- *pMsg = pTil;
- }
- }
- else
- {
- /* eumbbar is the base and read the outbound free tail ptr */
- pHdr = (void *)load_runtime_reg( base, I2O_OFHPR ); /* queue head */
- pTil = (void *)load_runtime_reg( base, I2O_OFTPR ); /* queue tail */
-
- /* check underflow */
- if ( pHdr == pTil )
- {
- /* hdr and til point to the same fifo item, no free MFA */
- stat = I2OQUEEMPTY;
- }
- else
- {
- /* update OFTPR */
- *pMsg = (void *)(*(unsigned char *)pTil);
- pTil = (void *)((unsigned int)pTil + 4);
- if ( (unsigned int)pTil == fifo_stat.qba + ( 4 * ( fifo_stat.qsz << 11 ) ) )
- {
- /* reach the upper limit */
- pTil = (void *)(fifo_stat.qba + ( 3 * (fifo_stat.qsz << 11) ));
- }
- store_runtime_reg( base, I2O_OFTPR, (unsigned int)pTil );
- }
- }
-
- return stat;
-}
-
-/******************************************************
- * function: I2OFIFOFree
- *
- * description: Free a used MFA back to free queue after
- * use.
- * return I2OSUCCESS if no error.
- * return I2OQUEFULL if inbound free queue
- * overflow
- *
- * note: PCI Master frees a MFA into device's outbound queue
- * (OFQPR) while local processor frees a MFA into its
- * inbound queue (IFHPR).
- *****************************************************/
-I2OSTATUS I2OFIFOFree( LOCATION loc,
- unsigned int base,
- void *pMsg )
-{
- void **pHdr, **pTil;
- I2OSTATUS stat = I2OSUCCESS;
-
- if ( fifo_stat.qba == 0xffffffff || pMsg == 0 )
- {
- return I2OQUEINVALID;
- }
-
- if ( loc == REMOTE )
- {
- /* pcsrbar is the base */
- store_runtime_reg( base, I2O_OFQPR, (unsigned int)pMsg );
- }
- else
- {
- /* eumbbar is the base */
- pHdr = (void **)load_runtime_reg( base, I2O_IFHPR );
- pTil = (void **)load_runtime_reg( base, I2O_IFTPR );
-
- /* store MFA */
- *pHdr = pMsg;
-
- /* update IFHPR */
- pHdr += 4;
-
- if ( (unsigned int)pHdr == fifo_stat.qba + ( fifo_stat.qsz << 11 ) )
- {
- /* reach the upper limit */
- pHdr = (void **)fifo_stat.qba;
- }
-
- /* check inbound free queue overflow */
- if ( pHdr != pTil )
- {
- store_runtime_reg( base, I2O_OPHPR, (unsigned int)pHdr);
- }
- else
- {
- stat = I2OQUEFULL;
- }
-
- }
-
- return stat;
-
-}
-
-/*********************************************
- * function: I2OFIFOPost
- *
- * description: Post a msg into FIFO post queue
- * the value of msg must be the one
- * returned by I2OFIFOAlloc
- *
- * note: PCI Master posts a msg into device's inbound queue
- * (IFQPR) while local processor post a msg into device's
- * outbound queue (OPHPR)
- *********************************************/
-I2OSTATUS I2OFIFOPost( LOCATION loc,
- unsigned int base,
- void *pMsg )
-{
- void **pHdr, **pTil;
- I2OSTATUS stat = I2OSUCCESS;
-
- if ( fifo_stat.qba == 0xffffffff || pMsg == 0 )
- {
- return I2OQUEINVALID;
- }
-
- if ( loc == REMOTE )
- {
- /* pcsrbar is the base */
- store_runtime_reg( base, I2O_IFQPR, (unsigned int)pMsg );
- }
- else
- {
- /* eumbbar is the base */
- pHdr = (void **)load_runtime_reg( base, I2O_OPHPR );
- pTil = (void **)load_runtime_reg( base, I2O_OPTPR );
-
- /* store MFA */
- *pHdr = pMsg;
-
- /* update IFHPR */
- pHdr += 4;
-
- if ( (unsigned int)pHdr == fifo_stat.qba + 3 * ( fifo_stat.qsz << 11 ) )
- {
- /* reach the upper limit */
- pHdr = (void **)(fifo_stat.qba + 2 * ( fifo_stat.qsz << 11 ) );
- }
-
- /* check post queue overflow */
- if ( pHdr != pTil )
- {
- store_runtime_reg( base, I2O_OPHPR, (unsigned int)pHdr);
- }
- else
- {
- stat = I2OQUEFULL;
- }
- }
-
- return stat;
-}
-
-/************************************************
- * function: I2OFIFOGet
- *
- * description: Read a msg from FIFO
- * This function should be called
- * only when there is a corresponding
- * msg interrupt.
- *
- * note: PCI Master reads a msg from device's outbound queue
- * (OFQPR) while local processor reads a msg from device's
- * inbound queue (IPTPR)
- ************************************************/
-I2OSTATUS I2OFIFOGet( LOCATION loc,
- unsigned int base,
- void **pMsg )
-{
- I2OSTATUS stat = I2OSUCCESS;
- void *pHdr, *pTil;
-
- if ( pMsg == 0 || *pMsg == 0 || fifo_stat.qba == 0xffffffff )
- {
- /* not configured */
- return I2OQUEINVALID;
- }
-
- if ( loc == REMOTE )
- {
- /* pcsrbar is the base */
- pTil = (void *)load_runtime_reg( base, I2O_OFQPR );
- if ( ( (unsigned int)pTil & 0xFFFFFFF ) == 0xFFFFFFFF )
- {
- stat = I2OQUEEMPTY;
- }
- else
- {
- *pMsg = pTil;
- }
- }
- else
- {
- /* eumbbar is the base and read the outbound free tail ptr */
- pHdr = (void *)load_runtime_reg( base, I2O_IPHPR ); /* queue head */
- pTil = (void *)load_runtime_reg( base, I2O_IPTPR ); /* queue tail */
-
- /* check underflow */
- if ( pHdr == pTil )
- {
- /* no free MFA */
- stat = I2OQUEEMPTY;
- }
- else
- {
- /* update OFTPR */
- *pMsg = (void *)(*(unsigned char *)pTil);
- pTil = (void *)((unsigned int)pTil + 4);
- if ( (unsigned int)pTil == fifo_stat.qba + 2 * ( fifo_stat.qsz << 11 ) )
- {
- /* reach the upper limit */
- pTil = (void *)(fifo_stat.qba + 1 * (fifo_stat.qsz << 11) );
- }
-
- store_runtime_reg( base, I2O_IPTPR, (unsigned int)pTil );
- }
- }
-
- return stat;
-}
-
-/********************************************************
- * function: I2OIOP
- *
- * description: Get the I2O PCI configuration identification
- * register.
- *
- * note: PCI master should pass pcsrbar while local processor
- * should pass eumbbar.
- *********************************************************/
-I2OSTATUS I2OPCIConfigGet( LOCATION loc,
- unsigned int base,
- I2OIOP * val)
-{
- unsigned int tmp;
- if ( val == 0 )
- {
- return I2OINVALID;
- }
- tmp = load_runtime_reg( base, PCI_CFG_CLA );
- val->base_class = ( tmp & 0xFF) << 16;
- tmp = load_runtime_reg( base, PCI_CFG_SCL );
- val->sub_class= ( (tmp & 0xFF) << 8 );
- tmp = load_runtime_reg( base, PCI_CFG_PIC );
- val->prg_code = (tmp & 0xFF);
- return I2OSUCCESS;
-}
-
-/*********************************************************
- * function: I2OFIFOIntEnable
- *
- * description: Enable the circular post queue interrupt
- *
- * note:
- * PCI master enables outbound FIFO interrupt of device
- * pscrbar is the base
- * Device enables its inbound FIFO interrupt
- * eumbbar is the base
- *******************************************************/
-void I2OFIFOIntEnable( LOCATION loc, unsigned int base )
-{
- unsigned int reg, val;
-
- /* LOCATION - REMOTE : enable outbound message of device, pcsrbar as base
- * LOCAL : enable local inbound message, eumbbar as base
- */
- reg = ( loc == REMOTE ? I2O_OMIMR : I2O_IMIMR );
- val = load_runtime_reg( base, reg );
-
- val &= 0xffffffdf; /* clear the msg interrupt bits */
- store_runtime_reg( base, reg, val );
-
-}
-
-/****************************************************
- * function: I2OFIFOIntDisable
- *
- * description: Disable the circular post queue interrupt
- *
- * note:
- * PCI master disables outbound FIFO interrupt of device
- * (pscrbar is the base)
- * Device disables its inbound FIFO interrupt
- * (eumbbar is the base)
- *****************************************************/
-void I2OFIFOIntDisable( LOCATION loc, unsigned int base )
-{
-
- /* LOCATION - REMOTE : disable outbound message interrupt of device, pcsrbar as base
- * LOCAL : disable local inbound message interrupt, eumbbar as base
- */
- unsigned int reg = ( loc == REMOTE ? I2O_OMIMR : I2O_IMIMR );
- unsigned int val = load_runtime_reg( base, reg );
-
- val |= 0x00000020; /* masked out the msg interrupt bits */
- store_runtime_reg( base, reg, val );
-
-}
-
-/*********************************************************
- * function: I2OFIFOOverflowIntEnable
- *
- * description: Enable the circular queue overflow interrupt
- *
- * note:
- * Device enables its inbound FIFO post overflow interrupt
- * and outbound free overflow interrupt.
- * eumbbar is the base
- *******************************************************/
-void I2OFIFOOverflowIntEnable( unsigned int eumbbar )
-{
- unsigned int val = load_runtime_reg( eumbbar, I2O_IMIMR );
-
- val &= 0xfffffe7f; /* clear the two overflow interrupt bits */
- store_runtime_reg( eumbbar, I2O_IMIMR, val );
-
-}
-
-/****************************************************
- * function: I2OFIFOOverflowIntDisable
- *
- * description: Disable the circular queue overflow interrupt
- *
- * note:
- * Device disables its inbound post FIFO overflow interrupt
- * and outbound free FIFO overflow interrupt
- * (eumbbar is the base)
- *****************************************************/
-void I2OFIFOOverflowIntDisable( unsigned int eumbbar )
-{
-
- unsigned int val = load_runtime_reg( eumbbar, I2O_IMIMR );
-
- val |= 0x00000180; /* masked out the msg overflow interrupt bits */
- store_runtime_reg( eumbbar, I2O_IMIMR, val );
-}
diff --git a/cpu/mpc824x/drivers/i2o/i2o2.S b/cpu/mpc824x/drivers/i2o/i2o2.S
deleted file mode 100644
index 990f9ef..0000000
--- a/cpu/mpc824x/drivers/i2o/i2o2.S
+++ /dev/null
@@ -1,47 +0,0 @@
-/**************************************
- *
- * copyright @ Motorola, 1999
- *
- **************************************/
-
-/**********************************************************
- * function: load_runtime_reg
- *
- * input: r3 - value of eumbbar
- * r4 - register offset in embedded utility space
- *
- * output: r3 - register content
- **********************************************************/
- .text
- .align 2
- .global load_runtime_reg
-
-load_runtime_reg:
-
- xor r5,r5,r5
- or r5,r5,r3 /* save eumbbar */
-
- lwbrx r3,r4,r5
- sync
-
- bclr 20, 0
-
-/****************************************************************
- * function: store_runtime_reg
- *
- * input: r3 - value of eumbbar
- * r4 - register offset in embedded utility space
- * r5 - new value to be stored
- *
- ****************************************************************/
- .text
- .align 2
- .global store_runtime_reg
-store_runtime_reg:
-
- xor r0,r0,r0
-
- stwbrx r5, r4, r3
- sync
-
- bclr 20,0
diff --git a/cpu/mpc8260/Makefile b/cpu/mpc8260/Makefile
index b4c269f..80d7852 100644
--- a/cpu/mpc8260/Makefile
+++ b/cpu/mpc8260/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,23 +23,27 @@
include $(TOPDIR)/config.mk
-LIB = lib$(CPU).a
+LIB = $(obj)lib$(CPU).a
START = start.o kgdb.o
-OBJS = traps.o serial_smc.o serial_scc.o cpu.o cpu_init.o speed.o \
+COBJS = traps.o serial_smc.o serial_scc.o cpu.o cpu_init.o speed.o \
interrupts.o ether_scc.o ether_fcc.o i2c.o commproc.o \
bedbug_603e.o pci.o spi.o
-all: .depend $(START) $(LIB)
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+START := $(addprefix $(obj),$(START))
+
+all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
- $(AR) crv $@ $(OBJS) kgdb.o
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(obj)kgdb.o
#########################################################################
-.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/cpu/mpc83xx/Makefile b/cpu/mpc83xx/Makefile
index 60df4cd..b2a6b3e 100644
--- a/cpu/mpc83xx/Makefile
+++ b/cpu/mpc83xx/Makefile
@@ -1,4 +1,7 @@
#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
# Copyright 2004 Freescale Semiconductor, Inc.
#
# See file CREDITS for list of people who contributed to this
@@ -22,31 +25,26 @@
include $(TOPDIR)/config.mk
-LIB = lib$(CPU).a
+LIB = $(obj)lib$(CPU).a
-START = start.o \
- resetvec.o
+START = start.o resetvec.o
+COBJS = traps.o cpu.o cpu_init.o speed.o interrupts.o \
+ i2c.o spd_sdram.o
-COBJS = traps.o \
- cpu.o \
- cpu_init.o \
- speed.o \
- interrupts.o \
- i2c.o \
- spd_sdram.o
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+START := $(addprefix $(obj),$(START))
-OBJS = $(COBJS)
-
-all: .depend $(START) $(LIB)
+all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
- $(AR) crv $@ $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(START:.o=.S) $(AOBJS:.o=.S) $(COBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(START:.o=.S) $(COBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/cpu/mpc85xx/Makefile b/cpu/mpc85xx/Makefile
index 5298dc1..7b32305 100644
--- a/cpu/mpc85xx/Makefile
+++ b/cpu/mpc85xx/Makefile
@@ -1,4 +1,7 @@
#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
# (C) Copyright 2002,2003 Motorola Inc.
# Xianghua Xiao,X.Xiao@motorola.com
#
@@ -23,23 +26,26 @@
include $(TOPDIR)/config.mk
-LIB = lib$(CPU).a
+LIB = $(obj)lib$(CPU).a
START = start.o resetvec.o
COBJS = traps.o cpu.o cpu_init.o speed.o interrupts.o \
pci.o serial_scc.o commproc.o ether_fcc.o i2c.o spd_sdram.o
-OBJS = $(COBJS)
-all: .depend $(START) $(LIB)
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+START := $(addprefix $(obj),$(START))
+
+all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
- $(AR) crv $@ $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(START:.o=.S) $(AOBJS:.o=.S) $(COBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(START:.o=.S) $(AOBJS:.o=.S) $(COBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/cpu/mpc8xx/Makefile b/cpu/mpc8xx/Makefile
index de75fad..223b30c 100644
--- a/cpu/mpc8xx/Makefile
+++ b/cpu/mpc8xx/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -25,25 +25,29 @@
# CFLAGS += -DET_DEBUG
-LIB = lib$(CPU).a
+LIB = $(obj)lib$(CPU).a
START = start.o kgdb.o
-OBJS = bedbug_860.o commproc.o cpu.o cpu_init.o \
+COBJS = bedbug_860.o commproc.o cpu.o cpu_init.o \
fec.o i2c.o interrupts.o lcd.o scc.o \
serial.o speed.o spi.o \
traps.o upatch.o video.o
SOBJS = plprcr_write.o
-all: .depend $(START) $(LIB)
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+START := $(addprefix $(obj),$(START))
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS) $(SOBJS) kgdb.o
+all: $(obj).depend $(START) $(LIB)
+
+$(LIB): $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(obj)kgdb.o
#########################################################################
-.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c) $(SOBJS:.o=.S)
- $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) $(SOBJS:.o=.S) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/cpu/nios/Makefile b/cpu/nios/Makefile
index 7855325..ad17456 100644
--- a/cpu/nios/Makefile
+++ b/cpu/nios/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,22 +23,26 @@
include $(TOPDIR)/config.mk
-LIB = lib$(CPU).a
+LIB = $(obj)lib$(CPU).a
START = start.o
-AOBJS = traps.o
-OBJS = cpu.o interrupts.o serial.o asmi.o spi.o
+SOBJS = traps.o
+COBJS = cpu.o interrupts.o serial.o asmi.o spi.o
-all: .depend $(START) $(LIB)
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+START := $(addprefix $(obj),$(START))
-$(LIB): $(OBJS) $(AOBJS)
- $(AR) crv $@ $(OBJS) $(AOBJS)
+all: $(obj).depend $(START) $(LIB)
+
+$(LIB): $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c) $(AOBJS:.o=.S)
- $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) $(AOBJS:.o=.S) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/cpu/nios2/Makefile b/cpu/nios2/Makefile
index 11fda50..75f30b4 100644
--- a/cpu/nios2/Makefile
+++ b/cpu/nios2/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,22 +23,26 @@
include $(TOPDIR)/config.mk
-LIB = lib$(CPU).a
+LIB = $(obj)lib$(CPU).a
START = start.o
-AOBJS = exceptions.o
-OBJS = cpu.o interrupts.o serial.o sysid.o traps.o epcs.o
+SOBJS = exceptions.o
+COBJS = cpu.o interrupts.o serial.o sysid.o traps.o epcs.o
-all: .depend $(START) $(LIB)
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+START := $(addprefix $(obj),$(START))
-$(LIB): $(OBJS) $(AOBJS)
- $(AR) crv $@ $(OBJS) $(AOBJS)
+all: $(obj).depend $(START) $(LIB)
+
+$(LIB): $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c) $(AOBJS:.o=.S)
- $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) $(AOBJS:.o=.S) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/cpu/ppc4xx/405gp_pci.c b/cpu/ppc4xx/405gp_pci.c
index 0b0686b..03128d3 100644
--- a/cpu/ppc4xx/405gp_pci.c
+++ b/cpu/ppc4xx/405gp_pci.c
@@ -555,7 +555,8 @@
#ifdef CONFIG_PCI_SCAN_SHOW
printf("PCI: Bus Dev VenId DevId Class Int\n");
#endif
-#if !defined(CONFIG_440EP) && !defined(CONFIG_440GR)
+#if !defined(CONFIG_440EP) && !defined(CONFIG_440GR) && \
+ !defined(CONFIG_440EPX) && !defined(CONFIG_440GRX)
out16r( PCIX0_CMD, in16r( PCIX0_CMD ) | PCI_COMMAND_MASTER);
#endif
hose->last_busno = pci_hose_scan(hose);
diff --git a/cpu/ppc4xx/440spe_pcie.c b/cpu/ppc4xx/440spe_pcie.c
index 2e920aa..6130cd2 100644
--- a/cpu/ppc4xx/440spe_pcie.c
+++ b/cpu/ppc4xx/440spe_pcie.c
@@ -169,7 +169,7 @@
break;
}
utl_base = (unsigned int *)(CFG_PCIE_BASE + 0x1000 * port);
-
+
/*
* Set buffer allocations and then assert VRB and TXE.
*/
@@ -270,7 +270,7 @@
SDR_WRITE(PESDR0_PLLLCT1, SDR_READ(PESDR0_PLLLCT1) & ~(1 << 24));
udelay(3);
- while(time_out) {
+ while (time_out) {
if (!(SDR_READ(PESDR0_PLLLCT3) & 0x10000000)) {
time_out--;
udelay(1);
@@ -284,6 +284,40 @@
return 0;
}
+/*
+ * Yucca board as End point and root point setup
+ * and
+ * testing inbound and out bound windows
+ *
+ * YUCCA board can be plugged into another yucca board or you can get PCI-E
+ * cable which can be used to setup loop back from one port to another port.
+ * Please rememeber that unless there is a endpoint plugged in to root port it
+ * will not initialize. It is the same in case of endpoint , unless there is
+ * root port attached it will not initialize.
+ *
+ * In this release of software all the PCI-E ports are configured as either
+ * endpoint or rootpoint.In future we will have support for selective ports
+ * setup as endpoint and root point in single board.
+ *
+ * Once your board came up as root point , you can verify by reading
+ * /proc/bus/pci/devices. Where you can see the configuration registers
+ * of end point device attached to the port.
+ *
+ * Enpoint cofiguration can be verified by connecting Yucca board to any
+ * host or another yucca board. Then try to scan the device. In case of
+ * linux use "lspci" or appripriate os command.
+ *
+ * How do I verify the inbound and out bound windows ?(yucca to yucca)
+ * in this configuration inbound and outbound windows are setup to access
+ * sram memroy area. SRAM is at 0x4 0000 0000 , on PLB bus. This address
+ * is mapped at 0x90000000. From u-boot prompt write data 0xb000 0000,
+ * This is waere your POM(PLB out bound memory window) mapped. then
+ * read the data from other yucca board's u-boot prompt at address
+ * 0x9000 0000(SRAM). Data should match.
+ * In case of inbound , write data to u-boot command prompt at 0xb000 0000
+ * which is mapped to 0x4 0000 0000. Now on rootpoint yucca u-boot prompt check
+ * data at 0x9000 0000(SRAM).Data should match.
+ */
int ppc440spe_init_pcie_rootport(int port)
{
static int core_init;
@@ -326,7 +360,7 @@
SDR_WRITE(PESDR0_HSSL6SET1, 0x35000000);
SDR_WRITE(PESDR0_HSSL7SET1, 0x35000000);
SDR_WRITE(PESDR0_RCSSET,
- (SDR_READ(PESDR0_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12);
+ (SDR_READ(PESDR0_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12);
break;
case 1:
@@ -339,7 +373,7 @@
SDR_WRITE(PESDR1_HSSL2SET1, 0x35000000);
SDR_WRITE(PESDR1_HSSL3SET1, 0x35000000);
SDR_WRITE(PESDR1_RCSSET,
- (SDR_READ(PESDR1_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12);
+ (SDR_READ(PESDR1_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12);
break;
case 2:
@@ -352,6 +386,225 @@
SDR_WRITE(PESDR2_HSSL2SET1, 0x35000000);
SDR_WRITE(PESDR2_HSSL3SET1, 0x35000000);
SDR_WRITE(PESDR2_RCSSET,
+ (SDR_READ(PESDR2_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12);
+ break;
+ }
+ /*
+ * Notice: the following delay has critical impact on device
+ * initialization - if too short (<50ms) the link doesn't get up.
+ */
+ mdelay(100);
+
+ switch (port) {
+ case 0:
+ val = SDR_READ(PESDR0_RCSSTS);
+ break;
+ case 1:
+ val = SDR_READ(PESDR1_RCSSTS);
+ break;
+ case 2:
+ val = SDR_READ(PESDR2_RCSSTS);
+ break;
+ }
+
+ if (val & (1 << 20)) {
+ printf("PCIE%d: PGRST failed %08x\n", port, val);
+ return -1;
+ }
+
+ /*
+ * Verify link is up
+ */
+ val = 0;
+ switch (port) {
+ case 0:
+ val = SDR_READ(PESDR0_LOOP);
+ break;
+ case 1:
+ val = SDR_READ(PESDR1_LOOP);
+ break;
+ case 2:
+ val = SDR_READ(PESDR2_LOOP);
+ break;
+ }
+ if (!(val & 0x00001000)) {
+ printf("PCIE%d: link is not up.\n", port);
+ return -1;
+ }
+
+ /*
+ * Setup UTL registers - but only on revA!
+ * We use default settings for revB chip.
+ */
+ if (!ppc440spe_revB())
+ ppc440spe_setup_utl(port);
+
+ /*
+ * We map PCI Express configuration access into the 512MB regions
+ *
+ * NOTICE: revB is very strict about PLB real addressess and ranges to
+ * be mapped for config space; it seems to only work with d_nnnn_nnnn
+ * range (hangs the core upon config transaction attempts when set
+ * otherwise) while revA uses c_nnnn_nnnn.
+ *
+ * For revA:
+ * PCIE0: 0xc_4000_0000
+ * PCIE1: 0xc_8000_0000
+ * PCIE2: 0xc_c000_0000
+ *
+ * For revB:
+ * PCIE0: 0xd_0000_0000
+ * PCIE1: 0xd_2000_0000
+ * PCIE2: 0xd_4000_0000
+ */
+
+ switch (port) {
+ case 0:
+ if (ppc440spe_revB()) {
+ mtdcr(DCRN_PEGPL_CFGBAH(PCIE0), 0x0000000d);
+ mtdcr(DCRN_PEGPL_CFGBAL(PCIE0), 0x00000000);
+ } else {
+ /* revA */
+ mtdcr(DCRN_PEGPL_CFGBAH(PCIE0), 0x0000000c);
+ mtdcr(DCRN_PEGPL_CFGBAL(PCIE0), 0x40000000);
+ }
+ mtdcr(DCRN_PEGPL_CFGMSK(PCIE0), 0xe0000001); /* 512MB region, valid */
+ break;
+
+ case 1:
+ if (ppc440spe_revB()) {
+ mtdcr(DCRN_PEGPL_CFGBAH(PCIE1), 0x0000000d);
+ mtdcr(DCRN_PEGPL_CFGBAL(PCIE1), 0x20000000);
+ } else {
+ mtdcr(DCRN_PEGPL_CFGBAH(PCIE1), 0x0000000c);
+ mtdcr(DCRN_PEGPL_CFGBAL(PCIE1), 0x80000000);
+ }
+ mtdcr(DCRN_PEGPL_CFGMSK(PCIE1), 0xe0000001); /* 512MB region, valid */
+ break;
+
+ case 2:
+ if (ppc440spe_revB()) {
+ mtdcr(DCRN_PEGPL_CFGBAH(PCIE2), 0x0000000d);
+ mtdcr(DCRN_PEGPL_CFGBAL(PCIE2), 0x40000000);
+ } else {
+ mtdcr(DCRN_PEGPL_CFGBAH(PCIE2), 0x0000000c);
+ mtdcr(DCRN_PEGPL_CFGBAL(PCIE2), 0xc0000000);
+ }
+ mtdcr(DCRN_PEGPL_CFGMSK(PCIE2), 0xe0000001); /* 512MB region, valid */
+ break;
+ }
+
+ /*
+ * Check for VC0 active and assert RDY.
+ */
+ attempts = 10;
+ switch (port) {
+ case 0:
+ while(!(SDR_READ(PESDR0_RCSSTS) & (1 << 16))) {
+ if (!(attempts--)) {
+ printf("PCIE0: VC0 not active\n");
+ return -1;
+ }
+ mdelay(1000);
+ }
+ SDR_WRITE(PESDR0_RCSSET, SDR_READ(PESDR0_RCSSET) | 1 << 20);
+ break;
+ case 1:
+ while(!(SDR_READ(PESDR1_RCSSTS) & (1 << 16))) {
+ if (!(attempts--)) {
+ printf("PCIE1: VC0 not active\n");
+ return -1;
+ }
+ mdelay(1000);
+ }
+
+ SDR_WRITE(PESDR1_RCSSET, SDR_READ(PESDR1_RCSSET) | 1 << 20);
+ break;
+ case 2:
+ while(!(SDR_READ(PESDR2_RCSSTS) & (1 << 16))) {
+ if (!(attempts--)) {
+ printf("PCIE2: VC0 not active\n");
+ return -1;
+ }
+ mdelay(1000);
+ }
+
+ SDR_WRITE(PESDR2_RCSSET, SDR_READ(PESDR2_RCSSET) | 1 << 20);
+ break;
+ }
+ mdelay(100);
+
+ return 0;
+}
+
+int ppc440spe_init_pcie_endport(int port)
+{
+ static int core_init;
+ volatile u32 val = 0;
+ int attempts;
+
+ if (!core_init) {
+ ++core_init;
+ if (ppc440spe_init_pcie())
+ return -1;
+ }
+
+ /*
+ * Initialize various parts of the PCI Express core for our port:
+ *
+ * - Set as a end port and enable max width
+ * (PXIE0 -> X8, PCIE1 and PCIE2 -> X4).
+ * - Set up UTL configuration.
+ * - Increase SERDES drive strength to levels suggested by AMCC.
+ * - De-assert RSTPYN, RSTDL and RSTGU.
+ *
+ * NOTICE for revB chip: PESDRn_UTLSET2 is not set - we leave it with
+ * default setting 0x11310000. The register has new fields,
+ * PESDRn_UTLSET2[LKINE] in particular: clearing it leads to PCIE core
+ * hang.
+ */
+ switch (port) {
+ case 0:
+ SDR_WRITE(PESDR0_DLPSET, 1 << 24 | PTYPE_LEGACY_ENDPOINT << 20 | LNKW_X8 << 12);
+
+ SDR_WRITE(PESDR0_UTLSET1, 0x20222222);
+ if (!ppc440spe_revB())
+ SDR_WRITE(PESDR0_UTLSET2, 0x11000000);
+ SDR_WRITE(PESDR0_HSSL0SET1, 0x35000000);
+ SDR_WRITE(PESDR0_HSSL1SET1, 0x35000000);
+ SDR_WRITE(PESDR0_HSSL2SET1, 0x35000000);
+ SDR_WRITE(PESDR0_HSSL3SET1, 0x35000000);
+ SDR_WRITE(PESDR0_HSSL4SET1, 0x35000000);
+ SDR_WRITE(PESDR0_HSSL5SET1, 0x35000000);
+ SDR_WRITE(PESDR0_HSSL6SET1, 0x35000000);
+ SDR_WRITE(PESDR0_HSSL7SET1, 0x35000000);
+ SDR_WRITE(PESDR0_RCSSET,
+ (SDR_READ(PESDR0_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12);
+ break;
+
+ case 1:
+ SDR_WRITE(PESDR1_DLPSET, 1 << 24 | PTYPE_LEGACY_ENDPOINT << 20 | LNKW_X4 << 12);
+ SDR_WRITE(PESDR1_UTLSET1, 0x20222222);
+ if (!ppc440spe_revB())
+ SDR_WRITE(PESDR1_UTLSET2, 0x11000000);
+ SDR_WRITE(PESDR1_HSSL0SET1, 0x35000000);
+ SDR_WRITE(PESDR1_HSSL1SET1, 0x35000000);
+ SDR_WRITE(PESDR1_HSSL2SET1, 0x35000000);
+ SDR_WRITE(PESDR1_HSSL3SET1, 0x35000000);
+ SDR_WRITE(PESDR1_RCSSET,
+ (SDR_READ(PESDR1_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12);
+ break;
+
+ case 2:
+ SDR_WRITE(PESDR2_DLPSET, 1 << 24 | PTYPE_LEGACY_ENDPOINT << 20 | LNKW_X4 << 12);
+ SDR_WRITE(PESDR2_UTLSET1, 0x20222222);
+ if (!ppc440spe_revB())
+ SDR_WRITE(PESDR2_UTLSET2, 0x11000000);
+ SDR_WRITE(PESDR2_HSSL0SET1, 0x35000000);
+ SDR_WRITE(PESDR2_HSSL1SET1, 0x35000000);
+ SDR_WRITE(PESDR2_HSSL2SET1, 0x35000000);
+ SDR_WRITE(PESDR2_HSSL3SET1, 0x35000000);
+ SDR_WRITE(PESDR2_RCSSET,
(SDR_READ(PESDR2_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12);
break;
}
@@ -418,7 +671,6 @@
* PCIE1: 0xd_2000_0000
* PCIE2: 0xd_4000_0000
*/
-
switch (port) {
case 0:
if (ppc440spe_revB()) {
@@ -498,29 +750,33 @@
return 0;
}
-void ppc440spe_setup_pcie(struct pci_controller *hose, int port)
+void ppc440spe_setup_pcie_rootpoint(struct pci_controller *hose, int port)
{
volatile void *mbase = NULL;
+ volatile void *rmbase = NULL;
pci_set_ops(hose,
- pcie_read_config_byte,
- pcie_read_config_word,
- pcie_read_config_dword,
- pcie_write_config_byte,
- pcie_write_config_word,
- pcie_write_config_dword);
+ pcie_read_config_byte,
+ pcie_read_config_word,
+ pcie_read_config_dword,
+ pcie_write_config_byte,
+ pcie_write_config_word,
+ pcie_write_config_dword);
- switch(port) {
+ switch (port) {
case 0:
mbase = (u32 *)CFG_PCIE0_XCFGBASE;
+ rmbase = (u32 *)CFG_PCIE0_CFGBASE;
hose->cfg_data = (u8 *)CFG_PCIE0_CFGBASE;
break;
case 1:
mbase = (u32 *)CFG_PCIE1_XCFGBASE;
+ rmbase = (u32 *)CFG_PCIE1_CFGBASE;
hose->cfg_data = (u8 *)CFG_PCIE1_CFGBASE;
break;
case 2:
mbase = (u32 *)CFG_PCIE2_XCFGBASE;
+ rmbase = (u32 *)CFG_PCIE2_CFGBASE;
hose->cfg_data = (u8 *)CFG_PCIE2_CFGBASE;
break;
}
@@ -528,14 +784,9 @@
/*
* Set bus numbers on our root port
*/
- if (ppc440spe_revB()) {
- out_8((u8 *)mbase + PCI_PRIMARY_BUS, 0);
- out_8((u8 *)mbase + PCI_SECONDARY_BUS, 1);
- out_8((u8 *)mbase + PCI_SUBORDINATE_BUS, 1);
- } else {
- out_8((u8 *)mbase + PCI_PRIMARY_BUS, 0);
- out_8((u8 *)mbase + PCI_SECONDARY_BUS, 0);
- }
+ out_8((u8 *)mbase + PCI_PRIMARY_BUS, 0);
+ out_8((u8 *)mbase + PCI_SECONDARY_BUS, 1);
+ out_8((u8 *)mbase + PCI_SUBORDINATE_BUS, 1);
/*
* Set up outbound translation to hose->mem_space from PLB
@@ -544,8 +795,7 @@
* subregions and to enable the outbound translation.
*/
out_le32(mbase + PECFG_POM0LAH, 0x00000000);
- out_le32(mbase + PECFG_POM0LAL, (CFG_PCIE_MEMBASE +
- port * CFG_PCIE_MEMSIZE));
+ out_le32(mbase + PECFG_POM0LAL, 0x00000000);
switch (port) {
case 0:
@@ -579,14 +829,134 @@
out_le32(mbase + PCI_BASE_ADDRESS_1, 0);
out_le32(mbase + PECFG_BAR0HMPA, 0x7fffffc);
out_le32(mbase + PECFG_BAR0LMPA, 0);
+
+ out_le32(mbase + PECFG_PIM01SAH, 0xffff0000);
+ out_le32(mbase + PECFG_PIM01SAL, 0x00000000);
out_le32(mbase + PECFG_PIM0LAL, 0);
out_le32(mbase + PECFG_PIM0LAH, 0);
+ out_le32(mbase + PECFG_PIM1LAL, 0x00000000);
+ out_le32(mbase + PECFG_PIM1LAH, 0x00000004);
out_le32(mbase + PECFG_PIMEN, 0x1);
/* Enable I/O, Mem, and Busmaster cycles */
out_le16((u16 *)(mbase + PCI_COMMAND),
in_le16((u16 *)(mbase + PCI_COMMAND)) |
PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
+ printf("PCIE:%d successfully set as rootpoint\n",port);
+}
+
+int ppc440spe_setup_pcie_endpoint(struct pci_controller *hose, int port)
+{
+ volatile void *mbase = NULL;
+ int attempts = 0;
+
+ pci_set_ops(hose,
+ pcie_read_config_byte,
+ pcie_read_config_word,
+ pcie_read_config_dword,
+ pcie_write_config_byte,
+ pcie_write_config_word,
+ pcie_write_config_dword);
+
+ switch (port) {
+ case 0:
+ mbase = (u32 *)CFG_PCIE0_XCFGBASE;
+ hose->cfg_data = (u8 *)CFG_PCIE0_CFGBASE;
+ break;
+ case 1:
+ mbase = (u32 *)CFG_PCIE1_XCFGBASE;
+ hose->cfg_data = (u8 *)CFG_PCIE1_CFGBASE;
+ break;
+ case 2:
+ mbase = (u32 *)CFG_PCIE2_XCFGBASE;
+ hose->cfg_data = (u8 *)CFG_PCIE2_CFGBASE;
+ break;
+ }
+
+ /*
+ * Set up outbound translation to hose->mem_space from PLB
+ * addresses at an offset of 0xd_0000_0000. We set the low
+ * bits of the mask to 11 to turn off splitting into 8
+ * subregions and to enable the outbound translation.
+ */
+ out_le32(mbase + PECFG_POM0LAH, 0x00001ff8);
+ out_le32(mbase + PECFG_POM0LAL, 0x00001000);
+
+ switch (port) {
+ case 0:
+ mtdcr(DCRN_PEGPL_OMR1BAH(PCIE0), 0x0000000d);
+ mtdcr(DCRN_PEGPL_OMR1BAL(PCIE0), CFG_PCIE_MEMBASE +
+ port * CFG_PCIE_MEMSIZE);
+ mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE0), 0x7fffffff);
+ mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE0),
+ ~(CFG_PCIE_MEMSIZE - 1) | 3);
+ break;
+ case 1:
+ mtdcr(DCRN_PEGPL_OMR1BAH(PCIE1), 0x0000000d);
+ mtdcr(DCRN_PEGPL_OMR1BAL(PCIE1), (CFG_PCIE_MEMBASE +
+ port * CFG_PCIE_MEMSIZE));
+ mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE1), 0x7fffffff);
+ mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE1),
+ ~(CFG_PCIE_MEMSIZE - 1) | 3);
+ break;
+ case 2:
+ mtdcr(DCRN_PEGPL_OMR1BAH(PCIE2), 0x0000000d);
+ mtdcr(DCRN_PEGPL_OMR1BAL(PCIE2), (CFG_PCIE_MEMBASE +
+ port * CFG_PCIE_MEMSIZE));
+ mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE2), 0x7fffffff);
+ mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE2),
+ ~(CFG_PCIE_MEMSIZE - 1) | 3);
+ break;
+ }
+
+ /* Set up 16GB inbound memory window at 0 */
+ out_le32(mbase + PCI_BASE_ADDRESS_0, 0);
+ out_le32(mbase + PCI_BASE_ADDRESS_1, 0);
+ out_le32(mbase + PECFG_BAR0HMPA, 0x7fffffc);
+ out_le32(mbase + PECFG_BAR0LMPA, 0);
+ out_le32(mbase + PECFG_PIM0LAL, 0x00000000);
+ out_le32(mbase + PECFG_PIM0LAH, 0x00000004); /* pointing to SRAM */
+ out_le32(mbase + PECFG_PIMEN, 0x1);
+
+ /* Enable I/O, Mem, and Busmaster cycles */
+ out_le16((u16 *)(mbase + PCI_COMMAND),
+ in_le16((u16 *)(mbase + PCI_COMMAND)) |
+ PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
+ out_le16(mbase + 0x200,0xcaad); /* Setting vendor ID */
+ out_le16(mbase + 0x202,0xfeed); /* Setting device ID */
+ attempts = 10;
+ switch (port) {
+ case 0:
+ while (!(SDR_READ(PESDR0_RCSSTS) & (1 << 8))) {
+ if (!(attempts--)) {
+ printf("PCIE0: BMEN is not active\n");
+ return -1;
+ }
+ mdelay(1000);
+ }
+ break;
+ case 1:
+ while (!(SDR_READ(PESDR1_RCSSTS) & (1 << 8))) {
+ if (!(attempts--)) {
+ printf("PCIE1: BMEN is not active\n");
+ return -1;
+ }
+ mdelay(1000);
+ }
+ break;
+ case 2:
+ while (!(SDR_READ(PESDR2_RCSSTS) & (1 << 8))) {
+ if (!(attempts--)) {
+ printf("PCIE2: BMEN is not active\n");
+ return -1;
+ }
+ mdelay(1000);
+ }
+ break;
+ }
+ printf("PCIE:%d successfully set as endpoint\n",port);
+
+ return 0;
}
#endif /* CONFIG_PCI */
#endif /* CONFIG_440SPE */
diff --git a/cpu/ppc4xx/440spe_pcie.h b/cpu/ppc4xx/440spe_pcie.h
index 47df762..2becc77 100644
--- a/cpu/ppc4xx/440spe_pcie.h
+++ b/cpu/ppc4xx/440spe_pcie.h
@@ -139,9 +139,17 @@
*/
#define PECFG_BAR0LMPA 0x210
#define PECFG_BAR0HMPA 0x214
+#define PECFG_BAR1MPA 0x218
+#define PECFG_BAR2MPA 0x220
+
#define PECFG_PIMEN 0x33c
#define PECFG_PIM0LAL 0x340
#define PECFG_PIM0LAH 0x344
+#define PECFG_PIM1LAL 0x348
+#define PECFG_PIM1LAH 0x34c
+#define PECFG_PIM01SAL 0x350
+#define PECFG_PIM01SAH 0x354
+
#define PECFG_POM0LAL 0x380
#define PECFG_POM0LAH 0x384
@@ -156,7 +164,8 @@
int ppc440spe_init_pcie(void);
int ppc440spe_init_pcie_rootport(int port);
void yucca_setup_pcie_fpga_rootpoint(int port);
-void ppc440spe_setup_pcie(struct pci_controller *hose, int port);
+void ppc440spe_setup_pcie_rootpoint(struct pci_controller *hose, int port);
+int ppc440spe_setup_pcie_endpoint(struct pci_controller *hose, int port);
int yucca_pcie_card_present(int port);
int pcie_hose_scan(struct pci_controller *hose, int bus);
#endif /* __440SPE_PCIE_H */
diff --git a/cpu/ppc4xx/4xx_enet.c b/cpu/ppc4xx/4xx_enet.c
index fab65af..81d49ff 100644
--- a/cpu/ppc4xx/4xx_enet.c
+++ b/cpu/ppc4xx/4xx_enet.c
@@ -130,7 +130,17 @@
#define BI_PHYMODE_NONE 0
#define BI_PHYMODE_ZMII 1
#define BI_PHYMODE_RGMII 2
+#define BI_PHYMODE_GMII 3
+#define BI_PHYMODE_RTBI 4
+#define BI_PHYMODE_TBI 5
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+#define BI_PHYMODE_SMII 6
+#define BI_PHYMODE_MII 7
+#endif
+#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+#define SDR0_MFR_ETH_CLK_SEL_V(n) ((0x01<<27) / (n+1))
+#endif
/*-----------------------------------------------------------------------------+
* Global variables. TX and RX descriptors and buffers.
@@ -181,7 +191,7 @@
{
EMAC_4XX_HW_PST hw_p = dev->priv;
uint32_t failsafe = 10000;
-#if defined(CONFIG_440SPE)
+#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
unsigned long mfr;
#endif
@@ -205,19 +215,19 @@
}
/* EMAC RESET */
-#if defined(CONFIG_440SPE)
+#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
/* provide clocks for EMAC internal loopback */
mfsdr (sdr_mfr, mfr);
- mfr |= 0x08000000;
+ mfr |= SDR0_MFR_ETH_CLK_SEL_V(hw_p->devnum);
mtsdr(sdr_mfr, mfr);
#endif
out32 (EMAC_M0 + hw_p->hw_addr, EMAC_M0_SRST);
-#if defined(CONFIG_440SPE)
+#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
/* remove clocks for EMAC internal loopback */
mfsdr (sdr_mfr, mfr);
- mfr &= ~0x08000000;
+ mfr &= ~SDR0_MFR_ETH_CLK_SEL_V(hw_p->devnum);
mtsdr(sdr_mfr, mfr);
#endif
@@ -317,10 +327,50 @@
out32 (RGMII_FER, rmiifer);
return ((int)pfc1);
-
}
#endif /* CONFIG_440_GX */
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+int ppc_4xx_eth_setup_bridge(int devnum, bd_t * bis)
+{
+ unsigned long zmiifer=0x0;
+
+ /*
+ * Right now only 2*RGMII is supported. Please extend when needed.
+ * sr - 2006-08-29
+ */
+ switch (1) {
+ case 0:
+ /* 1 x GMII port */
+ out32 (ZMII_FER, 0x00);
+ out32 (RGMII_FER, 0x00000037);
+ bis->bi_phymode[0] = BI_PHYMODE_GMII;
+ bis->bi_phymode[1] = BI_PHYMODE_NONE;
+ break;
+ case 1:
+ /* 2 x RGMII ports */
+ out32 (ZMII_FER, 0x00);
+ out32 (RGMII_FER, 0x00000055);
+ bis->bi_phymode[0] = BI_PHYMODE_RGMII;
+ bis->bi_phymode[1] = BI_PHYMODE_RGMII;
+ break;
+ case 2:
+ /* 2 x SMII ports */
+
+ break;
+ default:
+ break;
+ }
+
+ /* Ensure we setup mdio for this devnum and ONLY this devnum */
+ zmiifer = in32 (ZMII_FER);
+ zmiifer |= (ZMII_FER_MDI) << ZMII_FER_V(devnum);
+ out32 (ZMII_FER, zmiifer);
+
+ return ((int)0x0);
+}
+#endif /* CONFIG_440EPX */
+
static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
{
int i, j;
@@ -332,13 +382,16 @@
unsigned mode_reg;
unsigned short devnum;
unsigned short reg_short;
-#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+#if defined(CONFIG_440GX) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_440SP) || defined(CONFIG_440SPE)
sys_info_t sysinfo;
-#if defined(CONFIG_440GX) || defined(CONFIG_440SPE)
+#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
int ethgroup = -1;
#endif
#endif
-#if defined(CONFIG_440SPE)
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || defined(CONFIG_440SPE)
unsigned long mfr;
#endif
@@ -352,7 +405,9 @@
return -1;
}
-#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+#if defined(CONFIG_440GX) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_440SP) || defined(CONFIG_440SPE)
/* Need to get the OPB frequency so we can access the PHY */
get_sys_info (&sysinfo);
#endif
@@ -407,7 +462,7 @@
#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
out32 (ZMII_FER, (ZMII_FER_RMII | ZMII_FER_MDI) << ZMII_FER_V (devnum));
-#elif defined(CONFIG_440GX)
+#elif defined(CONFIG_440GX) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
ethgroup = ppc_4xx_eth_setup_bridge(devnum, bis);
#elif defined(CONFIG_440GP)
/* set RMII mode */
@@ -429,10 +484,10 @@
__asm__ volatile ("eieio");
/* reset emac so we have access to the phy */
-#if defined(CONFIG_440SPE)
+#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
/* provide clocks for EMAC internal loopback */
mfsdr (sdr_mfr, mfr);
- mfr |= 0x08000000;
+ mfr |= SDR0_MFR_ETH_CLK_SEL_V(devnum);
mtsdr(sdr_mfr, mfr);
#endif
@@ -444,15 +499,19 @@
udelay (1000);
failsafe--;
}
+ if (failsafe <= 0)
+ printf("\nProblem resetting EMAC!\n");
-#if defined(CONFIG_440SPE)
+#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
/* remove clocks for EMAC internal loopback */
mfsdr (sdr_mfr, mfr);
- mfr &= ~0x08000000;
+ mfr &= ~SDR0_MFR_ETH_CLK_SEL_V(devnum);
mtsdr(sdr_mfr, mfr);
#endif
-#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+#if defined(CONFIG_440GX) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_440SP) || defined(CONFIG_440SPE)
/* Whack the M1 register */
mode_reg = 0x0;
mode_reg &= ~0x00000038;
@@ -502,15 +561,39 @@
* otherwise, just check the speeds & feeds
*/
if (hw_p->first_init == 0) {
+#if defined(CONFIG_88E1111_CLK_DELAY)
+ /*
+ * On some boards (e.g. ALPR) the Marvell 88E1111 PHY needs
+ * the "RGMII transmit timing control" and "RGMII receive
+ * timing control" bits set, so that Gbit communication works
+ * without problems.
+ * Also set the "Transmitter disable" to 1 to enable the
+ * transmitter.
+ * After setting these bits a soft-reset must occur for this
+ * change to become active.
+ */
+ miiphy_read (dev->name, reg, 0x14, ®_short);
+ reg_short |= (1 << 7) | (1 << 1) | (1 << 0);
+ miiphy_write (dev->name, reg, 0x14, reg_short);
+#endif
+#if defined(CONFIG_M88E1111_PHY) /* test-only: merge with CONFIG_88E1111_CLK_DELAY !!! */
+ miiphy_write (dev->name, reg, 0x14, 0x0ce3);
+ miiphy_write (dev->name, reg, 0x18, 0x4101);
+ miiphy_write (dev->name, reg, 0x09, 0x0e00);
+ miiphy_write (dev->name, reg, 0x04, 0x01e1);
+#endif
miiphy_reset (dev->name, reg);
-#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+#if defined(CONFIG_440GX) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+
#if defined(CONFIG_CIS8201_PHY)
/*
* Cicada 8201 PHY needs to have an extended register whacked
* for RGMII mode.
*/
- if ( ((devnum == 2) || (devnum ==3)) && (4 == ethgroup) ) {
+ if (((devnum == 2) || (devnum == 3)) && (4 == ethgroup)) {
#if defined(CONFIG_CIS8201_SHORT_ETCH)
miiphy_write (dev->name, reg, 23, 0x1300);
#else
@@ -580,7 +663,8 @@
(int) speed, (duplex == HALF) ? "HALF" : "FULL");
}
-#if defined(CONFIG_440) && !defined(CONFIG_440SP) && !defined(CONFIG_440SPE)
+#if defined(CONFIG_440) && !defined(CONFIG_440SP) && !defined(CONFIG_440SPE) && \
+ !defined(CONFIG_440EPX) && !defined(CONFIG_440GRX)
#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
mfsdr(sdr_mfr, reg);
if (speed == 100) {
@@ -603,15 +687,34 @@
reg = (RGMII_SSR_SP_1000MBPS << RGMII_SSR_V (devnum));
else if (speed == 100)
reg = (RGMII_SSR_SP_100MBPS << RGMII_SSR_V (devnum));
- else
+ else if (speed == 10)
reg = (RGMII_SSR_SP_10MBPS << RGMII_SSR_V (devnum));
-
+ else {
+ printf("Error in RGMII Speed\n");
+ return -1;
+ }
out32 (RGMII_SSR, reg);
}
#endif /* defined(CONFIG_440) && !defined(CONFIG_440SP) */
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+ if (speed == 1000)
+ reg = (RGMII_SSR_SP_1000MBPS << RGMII_SSR_V (devnum));
+ else if (speed == 100)
+ reg = (RGMII_SSR_SP_100MBPS << RGMII_SSR_V (devnum));
+ else if (speed == 10)
+ reg = (RGMII_SSR_SP_10MBPS << RGMII_SSR_V (devnum));
+ else {
+ printf("Error in RGMII Speed\n");
+ return -1;
+ }
+ out32 (RGMII_SSR, reg);
+#endif
+
/* set the Mal configuration reg */
-#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+#if defined(CONFIG_440GX) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_440SP) || defined(CONFIG_440SPE)
mtdcr (malmcr, MAL_CR_PLBB | MAL_CR_OPBBL | MAL_CR_LEA |
MAL_CR_PLBLT_DEFAULT | MAL_CR_EOPIE | 0x00330000);
#else
@@ -795,8 +898,10 @@
/* set speed */
if (speed == _1000BASET) {
-#if defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+#if defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
unsigned long pfc1;
+
mfsdr (sdr_pfc1, pfc1);
pfc1 |= SDR0_PFC1_EM_1000;
mtsdr (sdr_pfc1, pfc1);
@@ -942,6 +1047,14 @@
#define UIC0SR uic0sr
#endif
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+#define UICMSR_ETHX uic0msr
+#define UICSR_ETHX uic0sr
+#else
+#define UICMSR_ETHX uic1msr
+#define UICSR_ETHX uic1sr
+#endif
+
int enetInt (struct eth_device *dev)
{
int serviced;
@@ -950,6 +1063,7 @@
unsigned long emac_isr = 0;
unsigned long mal_rx_eob;
unsigned long my_uic0msr, my_uic1msr;
+ unsigned long my_uicmsr_ethx;
#if defined(CONFIG_440GX)
unsigned long my_uic2msr;
@@ -977,8 +1091,11 @@
#if defined(CONFIG_440GX)
my_uic2msr = mfdcr (uic2msr);
#endif
+ my_uicmsr_ethx = mfdcr (UICMSR_ETHX);
+
if (!(my_uic0msr & (UIC_MRE | UIC_MTE))
- && !(my_uic1msr & (UIC_ETH0 | UIC_ETH1 | UIC_MS | UIC_MTDE | UIC_MRDE))) {
+ && !(my_uic1msr & (UIC_MS | UIC_MTDE | UIC_MRDE))
+ && !(my_uicmsr_ethx & (UIC_ETH0 | UIC_ETH1))) {
/* not for us */
return (rc);
}
@@ -997,8 +1114,7 @@
mal_isr = mfdcr (malesr);
/* look for mal error */
if (my_uic1msr & (UIC_MS | UIC_MTDE | UIC_MRDE)) {
- mal_err (dev, mal_isr, my_uic0msr,
- MAL_UIC_DEF, MAL_UIC_ERR);
+ mal_err (dev, mal_isr, my_uic1msr, MAL_UIC_DEF, MAL_UIC_ERR);
serviced = 1;
rc = 0;
}
@@ -1006,7 +1122,7 @@
/* port by port dispatch of emac interrupts */
if (hw_p->devnum == 0) {
- if (UIC_ETH0 & my_uic1msr) { /* look for EMAC errors */
+ if (UIC_ETH0 & my_uicmsr_ethx) { /* look for EMAC errors */
emac_isr = in32 (EMAC_ISR + hw_p->hw_addr);
if ((hw_p->emac_ier & emac_isr) != 0) {
emac_err (dev, emac_isr);
@@ -1017,14 +1133,15 @@
if ((hw_p->emac_ier & emac_isr)
|| (my_uic1msr & (UIC_MS | UIC_MTDE | UIC_MRDE))) {
mtdcr (UIC0SR, UIC_MRE | UIC_MTE); /* Clear */
- mtdcr (uic1sr, UIC_ETH0 | UIC_MS | UIC_MTDE | UIC_MRDE); /* Clear */
+ mtdcr (uic1sr, UIC_MS | UIC_MTDE | UIC_MRDE); /* Clear */
+ mtdcr (UICSR_ETHX, UIC_ETH0); /* Clear */
return (rc); /* we had errors so get out */
}
}
#if !defined(CONFIG_440SP)
if (hw_p->devnum == 1) {
- if (UIC_ETH1 & my_uic1msr) { /* look for EMAC errors */
+ if (UIC_ETH1 & my_uicmsr_ethx) { /* look for EMAC errors */
emac_isr = in32 (EMAC_ISR + hw_p->hw_addr);
if ((hw_p->emac_ier & emac_isr) != 0) {
emac_err (dev, emac_isr);
@@ -1035,7 +1152,8 @@
if ((hw_p->emac_ier & emac_isr)
|| (my_uic1msr & (UIC_MS | UIC_MTDE | UIC_MRDE))) {
mtdcr (UIC0SR, UIC_MRE | UIC_MTE); /* Clear */
- mtdcr (uic1sr, UIC_ETH1 | UIC_MS | UIC_MTDE | UIC_MRDE); /* Clear */
+ mtdcr (uic1sr, UIC_MS | UIC_MTDE | UIC_MRDE); /* Clear */
+ mtdcr (UICSR_ETHX, UIC_ETH1); /* Clear */
return (rc); /* we had errors so get out */
}
}
@@ -1102,10 +1220,10 @@
mtdcr (uic1sr, UIC_MS | UIC_MTDE | UIC_MRDE); /* Clear */
switch (hw_p->devnum) {
case 0:
- mtdcr (uic1sr, UIC_ETH0);
+ mtdcr (UICSR_ETHX, UIC_ETH0);
break;
case 1:
- mtdcr (uic1sr, UIC_ETH1);
+ mtdcr (UICSR_ETHX, UIC_ETH1);
break;
#if defined (CONFIG_440GX)
case 2:
@@ -1512,7 +1630,7 @@
if (0 == virgin) {
/* set the MAL IER ??? names may change with new spec ??? */
-#if defined(CONFIG_440SPE)
+#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
mal_ier =
MAL_IER_PT | MAL_IER_PRE | MAL_IER_PWE |
MAL_IER_DE | MAL_IER_OTE | MAL_IER_OE | MAL_IER_PE ;
diff --git a/cpu/ppc4xx/Makefile b/cpu/ppc4xx/Makefile
index 7d6990f..baecf70 100644
--- a/cpu/ppc4xx/Makefile
+++ b/cpu/ppc4xx/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,29 +23,31 @@
include $(TOPDIR)/config.mk
-LIB = lib$(CPU).a
+LIB = $(obj)lib$(CPU).a
START = start.o resetvec.o kgdb.o
-AOBJS = dcr.o
+SOBJS = dcr.o
COBJS = 405gp_pci.o 4xx_enet.o \
bedbug_405.o commproc.o \
cpu.o cpu_init.o i2c.o interrupts.o \
- miiphy.o sdram.o serial.o \
+ miiphy.o ndfc.o sdram.o serial.o \
spd_sdram.o speed.o traps.o usb_ohci.o usbdev.o \
440spe_pcie.o
-OBJS = $(AOBJS) $(COBJS)
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+START := $(addprefix $(obj),$(START))
-all: .depend $(START) $(LIB)
+all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
- $(AR) crv $@ $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(START:.o=.S) $(AOBJS:.o=.S) $(COBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(START:.o=.S) $(AOBJS:.o=.S) $(COBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/cpu/ppc4xx/cpu.c b/cpu/ppc4xx/cpu.c
index bc51fbf..94478db 100644
--- a/cpu/ppc4xx/cpu.c
+++ b/cpu/ppc4xx/cpu.c
@@ -41,14 +41,15 @@
DECLARE_GLOBAL_DATA_PTR;
#endif
-
#if defined(CONFIG_440)
#define FREQ_EBC (sys_info.freqEPB)
#else
#define FREQ_EBC (sys_info.freqPLB / sys_info.pllExtBusDiv)
#endif
-#if defined(CONFIG_405GP) || defined(CONFIG_440EP) || defined(CONFIG_440GR)
+#if defined(CONFIG_405GP) || \
+ defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
#define PCI_ASYNC
@@ -58,7 +59,8 @@
return (mfdcr(strap) & PSR_PCI_ASYNC_EN);
#endif
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
unsigned long val;
mfsdr(sdr_sdstp1, val);
@@ -82,9 +84,10 @@
return (mfdcr(cpc0_strp1) & CPC0_STRP1_PAE_MASK);
#endif
-#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || \
- defined(CONFIG_440GR) || defined(CONFIG_440SP) || \
- defined(CONFIG_440SPE)
+#if defined(CONFIG_440GX) || \
+ defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_440SP) || defined(CONFIG_440SPE)
unsigned long val;
mfsdr(sdr_sdstp1, val);
@@ -93,8 +96,10 @@
}
#endif
-#if defined(CONFIG_405EP) || defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
- defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+#if defined(CONFIG_405EP) || defined(CONFIG_440GX) || \
+ defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_440SP) || defined(CONFIG_440SPE)
#define I2C_BOOTROM
@@ -102,17 +107,75 @@
{
#if defined(CONFIG_405EP)
return (mfdcr(cpc0_boot) & CPC0_BOOT_SEP);
-#endif
-
-#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || \
- defined(CONFIG_440GR) || defined(CONFIG_440SP) || \
- defined(CONFIG_440SPE)
+#else
unsigned long val;
mfsdr(sdr_sdcs, val);
return (val & SDR0_SDCS_SDD);
#endif
+}
+
+#if defined(CONFIG_440GX)
+#define SDR0_PINSTP_SHIFT 29
+static char *bootstrap_str[] = {
+ "EBC (16 bits)",
+ "EBC (8 bits)",
+ "EBC (32 bits)",
+ "EBC (8 bits)",
+ "PCI",
+ "I2C (Addr 0x54)",
+ "Reserved",
+ "I2C (Addr 0x50)",
+};
+#endif
+
+#if defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+#define SDR0_PINSTP_SHIFT 30
+static char *bootstrap_str[] = {
+ "EBC (8 bits)",
+ "PCI",
+ "I2C (Addr 0x54)",
+ "I2C (Addr 0x50)",
+};
+#endif
+
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
+#define SDR0_PINSTP_SHIFT 29
+static char *bootstrap_str[] = {
+ "EBC (8 bits)",
+ "PCI",
+ "NAND (8 bits)",
+ "EBC (16 bits)",
+ "EBC (16 bits)",
+ "I2C (Addr 0x54)",
+ "PCI",
+ "I2C (Addr 0x52)",
+};
+#endif
+
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+#define SDR0_PINSTP_SHIFT 29
+static char *bootstrap_str[] = {
+ "EBC (8 bits)",
+ "EBC (16 bits)",
+ "EBC (16 bits)",
+ "NAND (8 bits)",
+ "PCI",
+ "I2C (Addr 0x54)",
+ "PCI",
+ "I2C (Addr 0x52)",
+};
+#endif
+
+#if defined(SDR0_PINSTP_SHIFT)
+static int bootstrap_option(void)
+{
+ unsigned long val;
+
+ mfsdr(sdr_pinstp, val);
+ return ((val & 0xe0000000) >> SDR0_PINSTP_SHIFT);
}
+#endif /* SDR0_PINSTP_SHIFT */
#endif
@@ -244,6 +307,22 @@
#endif /* CONFIG_440GR */
#endif /* CONFIG_440 */
+ case PVR_440EPX1_RA:
+ puts("EPx Rev. A - Security/Kasumi support");
+ break;
+
+ case PVR_440EPX2_RA:
+ puts("EPx Rev. A - No Security/Kasumi support");
+ break;
+
+ case PVR_440GRX1_RA:
+ puts("GRx Rev. A - Security/Kasumi support");
+ break;
+
+ case PVR_440GRX2_RA:
+ puts("GRx Rev. A - No Security/Kasumi support");
+ break;
+
case PVR_440SP_RA:
puts("SP Rev. A");
break;
@@ -272,6 +351,10 @@
#if defined(I2C_BOOTROM)
printf (" I2C boot EEPROM %sabled\n", i2c_bootrom_enabled() ? "en" : "dis");
+#if defined(SDR0_PINSTP_SHIFT)
+ printf (" Bootstrap Option %c - ", (char)bootstrap_option() + 'A');
+ printf ("Boot ROM Location %s\n", bootstrap_str[bootstrap_option()]);
+#endif
#endif
#if defined(CONFIG_PCI)
diff --git a/cpu/ppc4xx/interrupts.c b/cpu/ppc4xx/interrupts.c
index 886f405..c5a9f02 100644
--- a/cpu/ppc4xx/interrupts.c
+++ b/cpu/ppc4xx/interrupts.c
@@ -57,12 +57,13 @@
void uic1_interrupt( void * parms); /* UIC1 handler */
-#if defined(CONFIG_440GX) || defined(CONFIG_440SPE)
+#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
static struct irq_action irq_vecs2[32]; /* For UIC2 */
void uic2_interrupt( void * parms); /* UIC2 handler */
#endif /* CONFIG_440GX CONFIG_440SPE */
-#if defined(CONFIG_440SPE)
+#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
static struct irq_action irq_vecs3[32]; /* For UIC3 */
void uic3_interrupt( void * parms); /* UIC3 handler */
#endif /* CONFIG_440SPE */
@@ -119,12 +120,13 @@
irq_vecs1[vec].handler = NULL;
irq_vecs1[vec].arg = NULL;
irq_vecs1[vec].count = 0;
-#if defined(CONFIG_440GX) || defined(CONFIG_440SPE)
+#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
irq_vecs2[vec].handler = NULL;
irq_vecs2[vec].arg = NULL;
irq_vecs2[vec].count = 0;
#endif /* CONFIG_440GX */
-#if defined(CONFIG_440SPE)
+#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
irq_vecs3[vec].handler = NULL;
irq_vecs3[vec].arg = NULL;
irq_vecs3[vec].count = 0;
@@ -230,6 +232,32 @@
} /* external_interrupt CONFIG_440GX */
+#elif defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+void external_interrupt(struct pt_regs *regs)
+{
+ ulong uic_msr;
+
+ /*
+ * Read masked interrupt status register to determine interrupt source
+ */
+ /* 440 SPe uses base uic register */
+ uic_msr = mfdcr(uic0msr);
+
+ if ( (UICB0_UIC1CI & uic_msr) || (UICB0_UIC1NCI & uic_msr) )
+ uic1_interrupt(0);
+
+ if ( (UICB0_UIC2CI & uic_msr) || (UICB0_UIC2NCI & uic_msr) )
+ uic2_interrupt(0);
+
+ if (uic_msr & ~(UICB0_ALL))
+ uic0_interrupt(0);
+
+ mtdcr(uic0sr, uic_msr);
+
+ return;
+
+} /* external_interrupt CONFIG_440EPX & CONFIG_440GRX */
+
#elif defined(CONFIG_440SPE)
void external_interrupt(struct pt_regs *regs)
{
@@ -303,7 +331,8 @@
}
#endif
-#if defined(CONFIG_440GX) || defined(CONFIG_440SPE)
+#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
/* Handler for UIC0 interrupt */
void uic0_interrupt( void * parms)
{
@@ -394,7 +423,8 @@
}
#endif /* defined(CONFIG_440) */
-#if defined(CONFIG_440GX) || defined(CONFIG_440SPE)
+#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
/* Handler for UIC2 interrupt */
void uic2_interrupt( void * parms)
{
@@ -496,7 +526,8 @@
int i = vec;
#if defined(CONFIG_440)
-#if defined(CONFIG_440GX) || defined(CONFIG_440SPE)
+#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
if ((vec > 31) && (vec < 64)) {
i = vec - 32;
irqa = irq_vecs1;
@@ -523,7 +554,8 @@
irqa[i].arg = arg;
#if defined(CONFIG_440)
-#if defined(CONFIG_440GX) || defined(CONFIG_440SPE)
+#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
if ((vec > 31) && (vec < 64))
mtdcr (uic1er, mfdcr (uic1er) | (0x80000000 >> i));
else if (vec > 63)
@@ -546,7 +578,8 @@
int i = vec;
#if defined(CONFIG_440)
-#if defined(CONFIG_440GX) || defined(CONFIG_440SPE)
+#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
if ((vec > 31) && (vec < 64)) {
irqa = irq_vecs1;
i = vec - 32;
@@ -567,7 +600,8 @@
#endif
#if defined(CONFIG_440)
-#if defined(CONFIG_440GX) || defined(CONFIG_440SPE)
+#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
if ((vec > 31) && (vec < 64))
mtdcr (uic1er, mfdcr (uic1er) & ~(0x80000000 >> i));
else if (vec > 63)
@@ -635,7 +669,8 @@
printf("\n");
#endif
-#if defined(CONFIG_440GX) || defined(CONFIG_440SPE)
+#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
printf ("\nUIC 2\n");
printf ("Nr Routine Arg Count\n");
diff --git a/cpu/ppc4xx/miiphy.c b/cpu/ppc4xx/miiphy.c
index aa580ed..6b98025 100644
--- a/cpu/ppc4xx/miiphy.c
+++ b/cpu/ppc4xx/miiphy.c
@@ -173,7 +173,8 @@
}
sta_reg = reg; /* reg address */
/* set clock (50Mhz) and read flags */
-#if defined(CONFIG_440GX) || defined(CONFIG_440SPE)
+#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
#if defined(CONFIG_IBM_EMAC4_V4) /* EMAC4 V4 changed bit setting */
sta_reg = (sta_reg & ~EMAC_STACR_OP_MASK) | EMAC_STACR_READ;
#else
@@ -183,7 +184,9 @@
sta_reg = (sta_reg | EMAC_STACR_READ) & ~EMAC_STACR_CLK_100MHZ;
#endif
-#if defined(CONFIG_PHY_CLK_FREQ) && !defined(CONFIG_440GX) && !defined(CONFIG__440SP) && !defined(CONFIG__440SPE)
+#if defined(CONFIG_PHY_CLK_FREQ) && !defined(CONFIG_440GX) && \
+ !defined(CONFIG_440SP) && !defined(CONFIG_440SPE) && \
+ !defined(CONFIG_440EPX) && !defined(CONFIG_440GRX)
sta_reg = sta_reg | CONFIG_PHY_CLK_FREQ;
#endif
sta_reg = sta_reg | (addr << 5); /* Phy address */
@@ -244,7 +247,8 @@
sta_reg = 0;
sta_reg = reg; /* reg address */
/* set clock (50Mhz) and read flags */
-#if defined(CONFIG_440GX) || defined(CONFIG_440SPE)
+#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
#if defined(CONFIG_IBM_EMAC4_V4) /* EMAC4 V4 changed bit setting */
sta_reg = (sta_reg & ~EMAC_STACR_OP_MASK) | EMAC_STACR_WRITE;
#else
@@ -254,7 +258,9 @@
sta_reg = (sta_reg | EMAC_STACR_WRITE) & ~EMAC_STACR_CLK_100MHZ;
#endif
-#if defined(CONFIG_PHY_CLK_FREQ) && !defined(CONFIG_440GX) && !defined(CONFIG__440SP) && !defined(CONFIG__440SPE)
+#if defined(CONFIG_PHY_CLK_FREQ) && !defined(CONFIG_440GX) && \
+ !defined(CONFIG_440SP) && !defined(CONFIG_440SPE) && \
+ !defined(CONFIG_440EPX) && !defined(CONFIG_440GRX)
sta_reg = sta_reg | CONFIG_PHY_CLK_FREQ; /* Set clock frequency (PLB freq. dependend) */
#endif
sta_reg = sta_reg | ((unsigned long) addr << 5);/* Phy address */
diff --git a/cpu/ppc4xx/ndfc.c b/cpu/ppc4xx/ndfc.c
new file mode 100644
index 0000000..183ab5e
--- /dev/null
+++ b/cpu/ppc4xx/ndfc.c
@@ -0,0 +1,175 @@
+/*
+ * Overview:
+ * Platform independend driver for NDFC (NanD Flash Controller)
+ * integrated into EP440 cores
+ *
+ * (C) Copyright 2006
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * Based on original work by
+ * Thomas Gleixner
+ * Copyright 2006 IBM
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#if (CONFIG_COMMANDS & CFG_CMD_NAND) && !defined(CFG_NAND_LEGACY) && \
+ (defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX))
+
+#include <nand.h>
+#include <linux/mtd/ndfc.h>
+#include <asm/processor.h>
+#include <ppc440.h>
+
+static u8 hwctl = 0;
+
+static void ndfc_hwcontrol(struct mtd_info *mtdinfo, int cmd)
+{
+ switch (cmd) {
+ case NAND_CTL_SETCLE:
+ hwctl |= 0x1;
+ break;
+
+ case NAND_CTL_CLRCLE:
+ hwctl &= ~0x1;
+ break;
+
+ case NAND_CTL_SETALE:
+ hwctl |= 0x2;
+ break;
+
+ case NAND_CTL_CLRALE:
+ hwctl &= ~0x2;
+ break;
+ }
+}
+
+static void ndfc_write_byte(struct mtd_info *mtdinfo, u_char byte)
+{
+ struct nand_chip *this = mtdinfo->priv;
+ ulong base = (ulong) this->IO_ADDR_W;
+
+ if (hwctl & 0x1)
+ out8(base + NDFC_CMD, byte);
+ else if (hwctl & 0x2)
+ out8(base + NDFC_ALE, byte);
+ else
+ out8(base + NDFC_DATA, byte);
+}
+
+static u_char ndfc_read_byte(struct mtd_info *mtdinfo)
+{
+ struct nand_chip *this = mtdinfo->priv;
+ ulong base = (ulong) this->IO_ADDR_W;
+
+ return (in8(base + NDFC_DATA));
+}
+
+static int ndfc_dev_ready(struct mtd_info *mtdinfo)
+{
+ struct nand_chip *this = mtdinfo->priv;
+ ulong base = (ulong) this->IO_ADDR_W;
+
+ while (!(in32(base + NDFC_STAT) & NDFC_STAT_IS_READY))
+ ;
+
+ return 1;
+}
+
+#ifndef CONFIG_NAND_SPL
+/*
+ * Don't use these speedup functions in NAND boot image, since the image
+ * has to fit into 4kByte.
+ */
+
+/*
+ * Speedups for buffer read/write/verify
+ *
+ * NDFC allows 32bit read/write of data. So we can speed up the buffer
+ * functions. No further checking, as nand_base will always read/write
+ * page aligned.
+ */
+static void ndfc_read_buf(struct mtd_info *mtdinfo, uint8_t *buf, int len)
+{
+ struct nand_chip *this = mtdinfo->priv;
+ ulong base = (ulong) this->IO_ADDR_W;
+ uint32_t *p = (uint32_t *) buf;
+
+ for(;len > 0; len -= 4)
+ *p++ = in32(base + NDFC_DATA);
+}
+
+static void ndfc_write_buf(struct mtd_info *mtdinfo, const uint8_t *buf, int len)
+{
+ struct nand_chip *this = mtdinfo->priv;
+ ulong base = (ulong) this->IO_ADDR_W;
+ uint32_t *p = (uint32_t *) buf;
+
+ for(; len > 0; len -= 4)
+ out32(base + NDFC_DATA, *p++);
+}
+
+static int ndfc_verify_buf(struct mtd_info *mtdinfo, const uint8_t *buf, int len)
+{
+ struct nand_chip *this = mtdinfo->priv;
+ ulong base = (ulong) this->IO_ADDR_W;
+ uint32_t *p = (uint32_t *) buf;
+
+ for(; len > 0; len -= 4)
+ if (*p++ != in32(base + NDFC_DATA))
+ return -1;
+
+ return 0;
+}
+#endif /* #ifndef CONFIG_NAND_SPL */
+
+void board_nand_init(struct nand_chip *nand)
+{
+ nand->eccmode = NAND_ECC_SOFT;
+
+ nand->hwcontrol = ndfc_hwcontrol;
+ nand->read_byte = ndfc_read_byte;
+ nand->write_byte = ndfc_write_byte;
+ nand->dev_ready = ndfc_dev_ready;
+
+#ifndef CONFIG_NAND_SPL
+ nand->write_buf = ndfc_write_buf;
+ nand->read_buf = ndfc_read_buf;
+ nand->verify_buf = ndfc_verify_buf;
+#else
+ /*
+ * Setup EBC (CS0 only right now)
+ */
+ mtdcr(ebccfga, xbcfg);
+ mtdcr(ebccfgd, 0xb8400000);
+
+ mtebc(pb0cr, CFG_EBC_PB0CR);
+ mtebc(pb0ap, CFG_EBC_PB0AP);
+#endif
+
+ /* Set NandFlash Core Configuration Register */
+ /* Chip select 3, 1col x 2 rows */
+ out32(CFG_NAND_BASE + NDFC_CCR, 0x00000000 | (CFG_NAND_CS << 24));
+ out32(CFG_NAND_BASE + NDFC_BCFG0 + (CFG_NAND_CS << 2), 0x80002222);
+}
+
+#endif
diff --git a/cpu/ppc4xx/serial.c b/cpu/ppc4xx/serial.c
index ad3ca6e..fab0d95 100644
--- a/cpu/ppc4xx/serial.c
+++ b/cpu/ppc4xx/serial.c
@@ -264,10 +264,12 @@
#endif /* CONFIG_IOP480 */
/*****************************************************************************/
-#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_440) || defined(CONFIG_405EP)
+#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_405EP) || \
+ defined(CONFIG_440)
#if defined(CONFIG_440)
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
#define UART0_BASE CFG_PERIPHERAL_BASE + 0x00000300
#define UART1_BASE CFG_PERIPHERAL_BASE + 0x00000400
#else
@@ -279,15 +281,34 @@
#define UART2_BASE CFG_PERIPHERAL_BASE + 0x00000600
#endif
-#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_440SP) || defined(CONFIG_440SPE)
-#define CR0_MASK 0xdfffffff
-#define CR0_EXTCLK_ENA 0x00800000
-#define CR0_UDIV_POS 0
-#else
+#if defined(CONFIG_440GP)
#define CR0_MASK 0x3fff0000
#define CR0_EXTCLK_ENA 0x00600000
#define CR0_UDIV_POS 16
-#endif /* CONFIG_440GX */
+#define UDIV_SUBTRACT 1
+#define UART0_SDR cntrl0
+#define MFREG(a, d) d = mfdcr(a)
+#define MTREG(a, d) mtdcr(a, d)
+#else /* #if defined(CONFIG_440GP) */
+/* all other 440 PPC's access clock divider via sdr register */
+#define CR0_MASK 0xdfffffff
+#define CR0_EXTCLK_ENA 0x00800000
+#define CR0_UDIV_POS 0
+#define UDIV_SUBTRACT 0
+#define UART0_SDR sdr_uart0
+#define UART1_SDR sdr_uart1
+#if defined(CONFIG_440EP) || defined(CONFIG_440EPx) || \
+ defined(CONFIG_440GR) || defined(CONFIG_440GRx) || \
+ defined(CONFIG_440SP) || defined(CONFIG_440SPe)
+#define UART2_SDR sdr_uart2
+#endif
+#if defined(CONFIG_440EP) || defined(CONFIG_440EPx) || \
+ defined(CONFIG_440GR) || defined(CONFIG_440GRx)
+#define UART3_SDR sdr_uart3
+#endif
+#define MFREG(a, d) mfsdr(a, d)
+#define MTREG(a, d) mtsdr(a, d)
+#endif /* #if defined(CONFIG_440GP) */
#elif defined(CONFIG_405EP)
#define UART0_BASE 0xef600300
#define UART1_BASE 0xef600400
@@ -309,23 +330,17 @@
#if defined(CONFIG_UART1_CONSOLE)
#define ACTING_UART0_BASE UART1_BASE
#define ACTING_UART1_BASE UART0_BASE
-#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || \
- defined(CONFIG_440GR) || defined(CONFIG_440SP) || \
- defined(CONFIG_440SPE)
-#define UART0_SDR sdr_uart1
-#define UART1_SDR sdr_uart0
-#endif /* CONFIG_440GX */
#else
#define ACTING_UART0_BASE UART0_BASE
#define ACTING_UART1_BASE UART1_BASE
-#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || \
- defined(CONFIG_440GR) || defined(CONFIG_440SP) || \
- defined(CONFIG_440SPE)
-#define UART0_SDR sdr_uart0
-#define UART1_SDR sdr_uart1
-#endif /* CONFIG_440GX */
#endif
+#if defined(CONFIG_SERIAL_MULTI)
+#define UART_BASE dev_base
+#else
+#define UART_BASE ACTING_UART0_BASE
+#endif
+
#if defined(CONFIG_405EP) && defined(CFG_EXT_SERIAL_CLOCK)
#error "External serial clock not supported on AMCC PPC405EP!"
#endif
@@ -419,7 +434,7 @@
*pbdiv = div/udiv;
}
-#endif /* defined(CONFIG_440) && !defined(CFG_EXT_SERIAL_CLK */
+#endif /* defined(CONFIG_440) && !defined(CFG_EXT_SERIAL_CLK) */
/*
* Minimal serial functions needed to use one of the SMC ports
@@ -441,23 +456,9 @@
unsigned long tmp;
#endif
-#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || \
- defined(CONFIG_440SPE)
-#if defined(CONFIG_SERIAL_MULTI)
- if (UART0_BASE == dev_base) {
- mfsdr(UART0_SDR,reg);
- reg &= ~CR0_MASK;
- } else {
- mfsdr(UART1_SDR,reg);
- reg &= ~CR0_MASK;
- }
-#else
- mfsdr(UART0_SDR,reg);
+ MFREG(UART0_SDR, reg);
reg &= ~CR0_MASK;
-#endif
-#else
- reg = mfdcr(cntrl0) & ~CR0_MASK;
-#endif /* CONFIG_440GX */
+
#ifdef CFG_EXT_SERIAL_CLOCK
reg |= CR0_EXTCLK_ENA;
udiv = 1;
@@ -471,47 +472,34 @@
serial_divs (gd->baudrate, &udiv, &bdiv);
#endif
-#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || \
- defined(CONFIG_440GR) || defined(CONFIG_440SP) || \
- defined(CONFIG_440SPE)
- reg |= udiv << CR0_UDIV_POS; /* set the UART divisor */
-#if defined(CONFIG_SERIAL_MULTI)
- if (UART0_BASE == dev_base) {
- mtsdr (UART0_SDR,reg);
- } else {
- mtsdr (UART1_SDR,reg);
- }
-#else
- mtsdr (UART0_SDR,reg);
+ reg |= (udiv - UDIV_SUBTRACT) << CR0_UDIV_POS; /* set the UART divisor */
+
+ /*
+ * Configure input clock to baudrate generator for all
+ * available serial ports here
+ */
+ MTREG(UART0_SDR, reg);
+#if defined(UART1_SDR)
+ MTREG(UART1_SDR, reg);
#endif
-#else
- reg |= (udiv - 1) << CR0_UDIV_POS; /* set the UART divisor */
- mtdcr (cntrl0, reg);
+#if defined(UART2_SDR)
+ MTREG(UART2_SDR, reg);
#endif
-
-#if defined(CONFIG_SERIAL_MULTI)
- out8 (dev_base + UART_LCR, 0x80); /* set DLAB bit */
- out8 (dev_base + UART_DLL, bdiv); /* set baudrate divisor */
- out8 (dev_base + UART_DLM, bdiv >> 8);/* set baudrate divisor */
- out8 (dev_base + UART_LCR, 0x03); /* clear DLAB; set 8 bits, no parity */
- out8 (dev_base + UART_FCR, 0x00); /* disable FIFO */
- out8 (dev_base + UART_MCR, 0x00); /* no modem control DTR RTS */
- val = in8 (dev_base + UART_LSR); /* clear line status */
- val = in8 (dev_base + UART_RBR); /* read receive buffer */
- out8 (dev_base + UART_SCR, 0x00); /* set scratchpad */
- out8 (dev_base + UART_IER, 0x00); /* set interrupt enable reg */
-#else
- out8 (ACTING_UART0_BASE + UART_LCR, 0x80); /* set DLAB bit */
- out8 (ACTING_UART0_BASE + UART_DLL, bdiv); /* set baudrate divisor */
- out8 (ACTING_UART0_BASE + UART_DLM, bdiv >> 8);/* set baudrate divisor */
- out8 (ACTING_UART0_BASE + UART_LCR, 0x03); /* clear DLAB; set 8 bits, no parity */
- out8 (ACTING_UART0_BASE + UART_FCR, 0x00); /* disable FIFO */
- out8 (ACTING_UART0_BASE + UART_MCR, 0x00); /* no modem control DTR RTS */
- val = in8 (ACTING_UART0_BASE + UART_LSR); /* clear line status */
- val = in8 (ACTING_UART0_BASE + UART_RBR); /* read receive buffer */
- out8 (ACTING_UART0_BASE + UART_SCR, 0x00); /* set scratchpad */
- out8 (ACTING_UART0_BASE + UART_IER, 0x00); /* set interrupt enable reg */
+#if defined(UART3_SDR)
+ MTREG(UART3_SDR, reg);
#endif
+
+ out8(UART_BASE + UART_LCR, 0x80); /* set DLAB bit */
+ out8(UART_BASE + UART_DLL, bdiv); /* set baudrate divisor */
+ out8(UART_BASE + UART_DLM, bdiv >> 8); /* set baudrate divisor */
+ out8(UART_BASE + UART_LCR, 0x03); /* clear DLAB; set 8 bits, no parity */
+ out8(UART_BASE + UART_FCR, 0x00); /* disable FIFO */
+ out8(UART_BASE + UART_MCR, 0x00); /* no modem control DTR RTS */
+ val = in8(UART_BASE + UART_LSR); /* clear line status */
+ val = in8(UART_BASE + UART_RBR); /* read receive buffer */
+ out8(UART_BASE + UART_SCR, 0x00); /* set scratchpad */
+ out8(UART_BASE + UART_IER, 0x00); /* set interrupt enable reg */
+
return (0);
}
@@ -564,29 +552,17 @@
tmp = gd->baudrate * udiv * 16;
bdiv = (clk + tmp / 2) / tmp;
-#if defined(CONFIG_SERIAL_MULTI)
- out8 (dev_base + UART_LCR, 0x80); /* set DLAB bit */
- out8 (dev_base + UART_DLL, bdiv); /* set baudrate divisor */
- out8 (dev_base + UART_DLM, bdiv >> 8);/* set baudrate divisor */
- out8 (dev_base + UART_LCR, 0x03); /* clear DLAB; set 8 bits, no parity */
- out8 (dev_base + UART_FCR, 0x00); /* disable FIFO */
- out8 (dev_base + UART_MCR, 0x00); /* no modem control DTR RTS */
- val = in8 (dev_base + UART_LSR); /* clear line status */
- val = in8 (dev_base + UART_RBR); /* read receive buffer */
- out8 (dev_base + UART_SCR, 0x00); /* set scratchpad */
- out8 (dev_base + UART_IER, 0x00); /* set interrupt enable reg */
-#else
- out8 (ACTING_UART0_BASE + UART_LCR, 0x80); /* set DLAB bit */
- out8 (ACTING_UART0_BASE + UART_DLL, bdiv); /* set baudrate divisor */
- out8 (ACTING_UART0_BASE + UART_DLM, bdiv >> 8);/* set baudrate divisor */
- out8 (ACTING_UART0_BASE + UART_LCR, 0x03); /* clear DLAB; set 8 bits, no parity */
- out8 (ACTING_UART0_BASE + UART_FCR, 0x00); /* disable FIFO */
- out8 (ACTING_UART0_BASE + UART_MCR, 0x00); /* no modem control DTR RTS */
- val = in8 (ACTING_UART0_BASE + UART_LSR); /* clear line status */
- val = in8 (ACTING_UART0_BASE + UART_RBR); /* read receive buffer */
- out8 (ACTING_UART0_BASE + UART_SCR, 0x00); /* set scratchpad */
- out8 (ACTING_UART0_BASE + UART_IER, 0x00); /* set interrupt enable reg */
-#endif
+ out8(UART_BASE + UART_LCR, 0x80); /* set DLAB bit */
+ out8(UART_BASE + UART_DLL, bdiv); /* set baudrate divisor */
+ out8(UART_BASE + UART_DLM, bdiv >> 8); /* set baudrate divisor */
+ out8(UART_BASE + UART_LCR, 0x03); /* clear DLAB; set 8 bits, no parity */
+ out8(UART_BASE + UART_FCR, 0x00); /* disable FIFO */
+ out8(UART_BASE + UART_MCR, 0x00); /* no modem control DTR RTS */
+ val = in8(UART_BASE + UART_LSR); /* clear line status */
+ val = in8(UART_BASE + UART_RBR); /* read receive buffer */
+ out8(UART_BASE + UART_SCR, 0x00); /* set scratchpad */
+ out8(UART_BASE + UART_IER, 0x00); /* set interrupt enable reg */
+
return (0);
}
@@ -598,55 +574,10 @@
void serial_setbrg (void)
#endif
{
- unsigned long tmp;
- unsigned long clk;
- unsigned long udiv;
- unsigned short bdiv;
-
-#ifdef CFG_EXT_SERIAL_CLOCK
- clk = CFG_EXT_SERIAL_CLOCK;
-#else
- clk = gd->cpu_clk;
-#endif
-
-#ifdef CONFIG_405EP
- udiv = ((mfdcr (cpc0_ucr) & UCR0_MASK) >> UCR0_UDIV_POS);
-#else
- udiv = ((mfdcr (cntrl0) & 0x3e) >> 1) + 1;
-#endif /* CONFIG_405EP */
-
-#if !defined(CFG_EXT_SERIAL_CLOCK) && \
- ( defined(CONFIG_440GX) || defined(CONFIG_440EP) || \
- defined(CONFIG_440GR) || defined(CONFIG_440SP) || \
- defined(CONFIG_440SPE) )
- serial_divs (gd->baudrate, &udiv, &bdiv);
- tmp = udiv << CR0_UDIV_POS; /* set the UART divisor */
-#if defined(CONFIG_SERIAL_MULTI)
- if (UART0_BASE == dev_base) {
- mtsdr (UART0_SDR, tmp);
- } else {
- mtsdr (UART1_SDR, tmp);
- }
-#else
- mtsdr (UART0_SDR, tmp);
-#endif
-
-#else
-
- tmp = gd->baudrate * udiv * 16;
- bdiv = (clk + tmp / 2) / tmp;
-#endif /* !defined(CFG_EXT_SERIAL_CLOCK) && (...) */
-
#if defined(CONFIG_SERIAL_MULTI)
- out8 (dev_base + UART_LCR, 0x80); /* set DLAB bit */
- out8 (dev_base + UART_DLL, bdiv); /* set baudrate divisor */
- out8 (dev_base + UART_DLM, bdiv >> 8);/* set baudrate divisor */
- out8 (dev_base + UART_LCR, 0x03); /* clear DLAB; set 8 bits, no parity */
+ serial_init_dev(dev_base);
#else
- out8 (ACTING_UART0_BASE + UART_LCR, 0x80); /* set DLAB bit */
- out8 (ACTING_UART0_BASE + UART_DLL, bdiv); /* set baudrate divisor */
- out8 (ACTING_UART0_BASE + UART_DLM, bdiv >> 8);/* set baudrate divisor */
- out8 (ACTING_UART0_BASE + UART_LCR, 0x03); /* clear DLAB; set 8 bits, no parity */
+ serial_init();
#endif
}
@@ -667,19 +598,11 @@
/* check THRE bit, wait for transmiter available */
for (i = 1; i < 3500; i++) {
-#if defined(CONFIG_SERIAL_MULTI)
- if ((in8 (dev_base + UART_LSR) & 0x20) == 0x20)
-#else
- if ((in8 (ACTING_UART0_BASE + UART_LSR) & 0x20) == 0x20)
-#endif
+ if ((in8 (UART_BASE + UART_LSR) & 0x20) == 0x20)
break;
udelay (100);
}
-#if defined(CONFIG_SERIAL_MULTI)
- out8 (dev_base + UART_THR, c); /* put character out */
-#else
- out8 (ACTING_UART0_BASE + UART_THR, c); /* put character out */
-#endif
+ out8 (UART_BASE + UART_THR, c); /* put character out */
}
#if defined(CONFIG_SERIAL_MULTI)
@@ -709,11 +632,7 @@
#if defined(CONFIG_HW_WATCHDOG)
WATCHDOG_RESET (); /* Reset HW Watchdog, if needed */
#endif /* CONFIG_HW_WATCHDOG */
-#if defined(CONFIG_SERIAL_MULTI)
- status = in8 (dev_base + UART_LSR);
-#else
- status = in8 (ACTING_UART0_BASE + UART_LSR);
-#endif
+ status = in8 (UART_BASE + UART_LSR);
if ((status & asyncLSRDataReady1) != 0x0) {
break;
}
@@ -721,22 +640,14 @@
asyncLSROverrunError1 |
asyncLSRParityError1 |
asyncLSRBreakInterrupt1 )) != 0) {
-#if defined(CONFIG_SERIAL_MULTI)
- out8 (dev_base + UART_LSR,
-#else
- out8 (ACTING_UART0_BASE + UART_LSR,
-#endif
+ out8 (UART_BASE + UART_LSR,
asyncLSRFramingError1 |
asyncLSROverrunError1 |
asyncLSRParityError1 |
asyncLSRBreakInterrupt1);
}
}
-#if defined(CONFIG_SERIAL_MULTI)
- return (0x000000ff & (int) in8 (dev_base));
-#else
- return (0x000000ff & (int) in8 (ACTING_UART0_BASE));
-#endif
+ return (0x000000ff & (int) in8 (UART_BASE));
}
#if defined(CONFIG_SERIAL_MULTI)
@@ -747,11 +658,7 @@
{
unsigned char status;
-#if defined(CONFIG_SERIAL_MULTI)
- status = in8 (dev_base + UART_LSR);
-#else
- status = in8 (ACTING_UART0_BASE + UART_LSR);
-#endif
+ status = in8 (UART_BASE + UART_LSR);
if ((status & asyncLSRDataReady1) != 0x0) {
return (1);
}
@@ -759,11 +666,7 @@
asyncLSROverrunError1 |
asyncLSRParityError1 |
asyncLSRBreakInterrupt1 )) != 0) {
-#if defined(CONFIG_SERIAL_MULTI)
- out8 (dev_base + UART_LSR,
-#else
- out8 (ACTING_UART0_BASE + UART_LSR,
-#endif
+ out8 (UART_BASE + UART_LSR,
asyncLSRFramingError1 |
asyncLSROverrunError1 |
asyncLSRParityError1 |
diff --git a/cpu/ppc4xx/speed.c b/cpu/ppc4xx/speed.c
index e552c03..2d16a83 100644
--- a/cpu/ppc4xx/speed.c
+++ b/cpu/ppc4xx/speed.c
@@ -199,7 +199,8 @@
#elif defined(CONFIG_440)
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
void get_sys_info (sys_info_t *sysInfo)
{
unsigned long temp;
diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S
index 60ed2d5..3f29314 100644
--- a/cpu/ppc4xx/start.S
+++ b/cpu/ppc4xx/start.S
@@ -117,12 +117,16 @@
.extern ext_bus_cntlr_init
.extern sdram_init
+#ifdef CONFIG_NAND_U_BOOT
+ .extern reconfig_tlb0
+#endif
/*
* Set up GOT: Global Offset Table
*
* Use r14 to access the GOT
*/
+#if !defined(CONFIG_NAND_SPL)
START_GOT
GOT_ENTRY(_GOT2_TABLE_)
GOT_ENTRY(_FIXUP_TABLE_)
@@ -136,6 +140,18 @@
GOT_ENTRY(_end)
GOT_ENTRY(__bss_start)
END_GOT
+#endif /* CONFIG_NAND_SPL */
+
+#if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
+ /*
+ * NAND U-Boot image is started from offset 0
+ */
+ .text
+ bl reconfig_tlb0
+ GET_GOT
+ bl cpu_init_f /* run low-level CPU init code (from Flash) */
+ bl board_init_f
+#endif
/*
* 440 Startup -- on reset only the top 4k of the effective
@@ -150,11 +166,21 @@
*/
#if defined(CONFIG_440)
+#if !defined(CONFIG_NAND_SPL)
.section .bootpg,"ax"
+#endif
.globl _start_440
/**************************************************************************/
_start_440:
+ /*--------------------------------------------------------------------+
+ | 440EPX BUP Change - Hardware team request
+ +--------------------------------------------------------------------*/
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+ sync
+ nop
+ nop
+#endif
/*----------------------------------------------------------------+
| Core bug fix. Clear the esr
+-----------------------------------------------------------------*/
@@ -171,15 +197,19 @@
mtspr srr1,r0
mtspr csrr0,r0
mtspr csrr1,r0
-#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE) /* NOTE: 440GX adds machine check status regs */
+ /* NOTE: 440GX adds machine check status regs */
+#if defined(CONFIG_440) && !defined(CONFIG_440GP)
mtspr mcsrr0,r0
mtspr mcsrr1,r0
- mfspr r1, mcsr
+ mfspr r1,mcsr
mtspr mcsr,r1
#endif
/*----------------------------------------------------------------*/
/* Initialize debug */
/*----------------------------------------------------------------*/
+ mfspr r1,dbcr0
+ andis. r1, r1, 0x8000 /* test DBCR0[EDM] bit */
+ bne skip_debug_init /* if set, don't clear debug register */
mtspr dbcr0,r0
mtspr dbcr1,r0
mtspr dbcr2,r0
@@ -193,6 +223,7 @@
mfspr r1,dbsr
mtspr dbsr,r1 /* Clear all valid bits */
+skip_debug_init:
/*----------------------------------------------------------------*/
/* CCR0 init */
@@ -352,7 +383,53 @@
/*----------------------------------------------------------------*/
/* Continue from 'normal' start */
/*----------------------------------------------------------------*/
-2: bl 3f
+2:
+
+#if defined(CONFIG_NAND_SPL)
+ /*
+ * Enable internal SRAM
+ */
+ lis r2,0x7fff
+ ori r2,r2,0xffff
+ mfdcr r1,isram0_dpc
+ and r1,r1,r2 /* Disable parity check */
+ mtdcr isram0_dpc,r1
+ mfdcr r1,isram0_pmeg
+ and r1,r1,r2 /* Disable pwr mgmt */
+ mtdcr isram0_pmeg,r1
+
+ /*
+ * Copy SPL from cache into internal SRAM
+ */
+ li r4,(CFG_NAND_BOOT_SPL_SIZE >> 2) - 1
+ mtctr r4
+ lis r2,CFG_NAND_BOOT_SPL_SRC@h
+ ori r2,r2,CFG_NAND_BOOT_SPL_SRC@l
+ lis r3,CFG_NAND_BOOT_SPL_DST@h
+ ori r3,r3,CFG_NAND_BOOT_SPL_DST@l
+spl_loop:
+ lwzu r4,4(r2)
+ stwu r4,4(r3)
+ bdnz spl_loop
+
+ /*
+ * Jump to code in RAM
+ */
+ bl 00f
+00: mflr r10
+ lis r3,(CFG_NAND_BOOT_SPL_SRC - CFG_NAND_BOOT_SPL_DST)@h
+ ori r3,r3,(CFG_NAND_BOOT_SPL_SRC - CFG_NAND_BOOT_SPL_DST)@l
+ sub r10,r10,r3
+ addi r10,r10,28
+ mtlr r10
+ blr
+
+start_ram:
+ sync
+ isync
+#endif
+
+ bl 3f
b _start
3: li r0,0
@@ -366,6 +443,7 @@
* r3 - 1st arg to board_init(): IMMP pointer
* r4 - 2nd arg to board_init(): boot flag
*/
+#ifndef CONFIG_NAND_SPL
.text
.long 0x27051956 /* U-Boot Magic Number */
.globl version_string
@@ -379,6 +457,7 @@
* location (0x100) is where the CriticalInput Execption should be.
*/
. = EXC_OFF_SYS_RESET
+#endif
.globl _start
_start:
@@ -417,7 +496,8 @@
/* Setup the internal SRAM */
/*----------------------------------------------------------------*/
li r0,0
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
+
+#ifdef CFG_INIT_RAM_DCACHE
/* Clear Dcache to use as RAM */
addis r3,r0,CFG_INIT_RAM_ADDR@h
ori r3,r3,CFG_INIT_RAM_ADDR@l
@@ -433,19 +513,22 @@
dcbz r0,r3
addi r3,r3,32
bdnz ..d_ag
-#else
-#if defined (CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+#endif /* CFG_INIT_RAM_DCACHE */
+
+ /* 440EP & 440GR are only 440er PPC's without internal SRAM */
+#if !defined(CONFIG_440EP) && !defined(CONFIG_440GR)
+ /* not all PPC's have internal SRAM usable as L2-cache */
+#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE)
mtdcr l2_cache_cfg,r0 /* Ensure L2 Cache is off */
#endif
- mtdcr isram0_sb1cr,r0 /* Disable bank 1 */
- li r2,0x7fff
+ lis r2,0x7fff
ori r2,r2,0xffff
mfdcr r1,isram0_dpc
and r1,r1,r2 /* Disable parity check */
mtdcr isram0_dpc,r1
mfdcr r1,isram0_pmeg
- andis. r1,r1,r2 /* Disable pwr mgmt */
+ and r1,r1,r2 /* Disable pwr mgmt */
mtdcr isram0_pmeg,r1
lis r1,0x8000 /* BAS = 8000_0000 */
@@ -474,11 +557,12 @@
lis r1, 0x0003
ori r1,r1, 0x0984 /* fourth 64k */
mtdcr isram0_sb3cr,r1
-#else
+#elif defined(CONFIG_440GP)
ori r1,r1,0x0380 /* 8k rw */
mtdcr isram0_sb0cr,r1
-#endif
+ mtdcr isram0_sb1cr,r0 /* Disable bank 1 */
#endif
+#endif /* #if !defined(CONFIG_440EP) && !defined(CONFIG_440GR) */
/*----------------------------------------------------------------*/
/* Setup the stack in internal SRAM */
@@ -495,10 +579,14 @@
stwu r1,-8(r1) /* Save back chain and move SP */
stw r0,+12(r1) /* Save return addr (underflow vect) */
+#ifdef CONFIG_NAND_SPL
+ bl nand_boot /* will not return */
+#else
GET_GOT
bl cpu_init_f /* run low-level CPU init code (from Flash) */
bl board_init_f
+#endif
#endif /* CONFIG_440 */
@@ -808,6 +896,7 @@
/*----------------------------------------------------------------------- */
+#ifndef CONFIG_NAND_SPL
/*****************************************************************************/
.globl _start_of_vectors
_start_of_vectors:
@@ -1013,6 +1102,7 @@
lwz r1,GPR1(r1)
SYNC
rfci
+#endif /* CONFIG_NAND_SPL */
/* Cache functions.
*/
@@ -1254,6 +1344,7 @@
/*------------------------------------------------------------------------------*/
+#ifndef CONFIG_NAND_SPL
/*
* void relocate_code (addr_sp, gd, addr_moni)
*
@@ -1267,7 +1358,9 @@
*/
.globl relocate_code
relocate_code:
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_440SPE)
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_440SPE)
/*
* On some 440er platforms the cache is enabled in the first TLB (Boot-CS)
* to speed up the boot process. Now this cache needs to be disabled.
@@ -1482,22 +1575,22 @@
cmplw 0, r7, r8
blt 4b
-#if !defined(CONFIG_440GX) && !defined(CONFIG_440SPE)
+#if !defined(CONFIG_440)
addi r7,r0,0x1000 /* set ME bit (Machine Exceptions) */
oris r7,r7,0x0002 /* set CE bit (Critical Exceptions) */
mtmsr r7 /* change MSR */
#else
- bl __440gx_msr_set
- b __440gx_msr_continue
+ bl __440_msr_set
+ b __440_msr_continue
-__440gx_msr_set:
+__440_msr_set:
addi r7,r0,0x1000 /* set ME bit (Machine Exceptions) */
oris r7,r7,0x0002 /* set CE bit (Critical Exceptions) */
mtspr srr1,r7
mflr r7
mtspr srr0,r7
rfi
-__440gx_msr_continue:
+__440_msr_continue:
#endif
mtlr r4 /* restore link register */
@@ -1516,6 +1609,7 @@
stw r0, 4(r7)
blr
+#endif /* CONFIG_NAND_SPL */
/**************************************************************************/
diff --git a/cpu/ppc4xx/usb_ohci.c b/cpu/ppc4xx/usb_ohci.c
index bb57658..ab852c5 100644
--- a/cpu/ppc4xx/usb_ohci.c
+++ b/cpu/ppc4xx/usb_ohci.c
@@ -76,7 +76,7 @@
#define m16_swap(x) swap_16(x)
#define m32_swap(x) swap_32(x)
-#ifdef CONFIG_440EP
+#if defined(CONFIG_440EP) || defined(CONFIG_440EPX)
#define ohci_cpu_to_le16(x) (x)
#define ohci_cpu_to_le32(x) (x)
#else
@@ -1599,7 +1599,11 @@
gohci.disabled = 1;
gohci.sleeping = 0;
gohci.irq = -1;
- gohci.regs = (struct ohci_regs *)(CFG_PERIPHERAL_BASE | 0x1000);
+#if defined(CONFIG_440EP)
+ gohci.regs = (struct ohci_regs *)(CFG_PERIPHERAL_BASE | 0x1000);
+#elif defined(CONFIG_440EPX)
+ gohci.regs = (struct ohci_regs *)(CFG_USB_HOST);
+#endif
gohci.flags = 0;
gohci.slot_name = "ppc440";
diff --git a/cpu/ppc4xx/usbdev.c b/cpu/ppc4xx/usbdev.c
index 8262c54..6140d2a 100644
--- a/cpu/ppc4xx/usbdev.c
+++ b/cpu/ppc4xx/usbdev.c
@@ -3,7 +3,7 @@
#include <common.h>
#include <asm/processor.h>
-#ifdef CONFIG_440EP
+#if (defined(CONFIG_440EP) || defined(CONFIG_440EPX)) && (CONFIG_COMMANDS & CFG_CMD_USB)
#include <usb.h>
#include "usbdev.h"
@@ -186,8 +186,23 @@
return 0;
}
+#if defined(CONFIG_440EPX)
void usb_dev_init()
{
+ printf("USB 2.0 Device init\n");
+
+ /*usb dev init */
+ *(unsigned char *)USB2D0_POWER_8 = 0xa1; /* 2.0 */
+
+ /*enable interrupts */
+ *(unsigned char *)USB2D0_INTRUSBE_8 = 0x0f;
+
+ irq_install_handler(VECNUM_HSB2D, (interrupt_handler_t *) usbInt,
+ NULL);
+}
+#else
+void usb_dev_init()
+{
#ifdef USB_2_0_DEVICE
printf("USB 2.0 Device init\n");
/*select 2.0 device */
@@ -210,5 +225,6 @@
irq_install_handler(VECNUM_USBDEV, (interrupt_handler_t *) usbInt,
NULL);
}
+#endif
-#endif /*CONFIG_440EP */
+#endif /* CONFIG_440EP || CONFIG_440EPX */
diff --git a/cpu/ppc4xx/vecnum.h b/cpu/ppc4xx/vecnum.h
index 93cef02..685d48b 100644
--- a/cpu/ppc4xx/vecnum.h
+++ b/cpu/ppc4xx/vecnum.h
@@ -31,7 +31,94 @@
#ifndef _VECNUMS_H_
#define _VECNUMS_H_
-#if defined(CONFIG_440SPE)
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+
+/* UIC 0 */
+#define VECNUM_U0 0 /* UART 0 */
+#define VECNUM_U1 1 /* UART 1 */
+#define VECNUM_IIC0 2 /* IIC */
+#define VECNUM_KRD 3 /* Kasumi Ready for data */
+#define VECNUM_KDA 4 /* Kasumi Data Available */
+#define VECNUM_PCRW 5 /* PCI command register write */
+#define VECNUM_PPM 6 /* PCI power management */
+#define VECNUM_IIC1 7 /* IIC */
+#define VECNUM_SPI 8 /* SPI */
+#define VECNUM_EPCISER 9 /* External PCI SERR */
+#define VECNUM_MTE 10 /* MAL TXEOB */
+#define VECNUM_MRE 11 /* MAL RXEOB */
+#define VECNUM_D0 12 /* DMA channel 0 */
+#define VECNUM_D1 13 /* DMA channel 1 */
+#define VECNUM_D2 14 /* DMA channel 2 */
+#define VECNUM_D3 15 /* DMA channel 3 */
+#define VECNUM_UD0 16 /* UDMA irq 0 */
+#define VECNUM_UD1 17 /* UDMA irq 1 */
+#define VECNUM_UD2 18 /* UDMA irq 2 */
+#define VECNUM_UD3 19 /* UDMA irq 3 */
+#define VECNUM_HSB2D 20 /* USB2.0 Device */
+#define VECNUM_USBDEV 20 /* USB 1.1/USB 2.0 Device */
+#define VECNUM_OHCI1 21 /* USB2.0 Host OHCI irq 1 */
+#define VECNUM_OHCI2 22 /* USB2.0 Host OHCI irq 2 */
+#define VECNUM_EIP94 23 /* Security EIP94 */
+#define VECNUM_ETH0 24 /* Emac 0 */
+#define VECNUM_ETH1 25 /* Emac 1 */
+#define VECNUM_EHCI 26 /* USB2.0 Host EHCI */
+#define VECNUM_EIR4 27 /* External interrupt 4 */
+#define VECNUM_UIC2NC 28 /* UIC2 non-critical interrupt */
+#define VECNUM_UIC2C 29 /* UIC2 critical interrupt */
+#define VECNUM_UIC1NC 30 /* UIC1 non-critical interrupt */
+#define VECNUM_UIC1C 31 /* UIC1 critical interrupt */
+
+/* UIC 1 */
+#define VECNUM_MS (32 + 0) /* MAL SERR */
+#define VECNUM_MTDE (32 + 1) /* MAL TXDE */
+#define VECNUM_MRDE (32 + 2) /* MAL RXDE */
+#define VECNUM_U2 (32 + 3) /* UART 2 */
+#define VECNUM_U3 (32 + 4) /* UART 3 */
+#define VECNUM_EBCO (32 + 5) /* EBCO interrupt status */
+#define VECNUM_NDFC (32 + 6) /* NDFC */
+#define VECNUM_KSLE (32 + 7) /* KASUMI slave error */
+#define VECNUM_CT5 (32 + 8) /* GPT compare timer 5 */
+#define VECNUM_CT6 (32 + 9) /* GPT compare timer 6 */
+#define VECNUM_PLB34I0 (32 + 10) /* PLB3X4X MIRQ0 */
+#define VECNUM_PLB34I1 (32 + 11) /* PLB3X4X MIRQ1 */
+#define VECNUM_PLB34I2 (32 + 12) /* PLB3X4X MIRQ2 */
+#define VECNUM_PLB34I3 (32 + 13) /* PLB3X4X MIRQ3 */
+#define VECNUM_PLB34I4 (32 + 14) /* PLB3X4X MIRQ4 */
+#define VECNUM_PLB34I5 (32 + 15) /* PLB3X4X MIRQ5 */
+#define VECNUM_CT0 (32 + 16) /* GPT compare timer 0 */
+#define VECNUM_CT1 (32 + 17) /* GPT compare timer 1 */
+#define VECNUM_EIR7 (32 + 18) /* External interrupt 7 */
+#define VECNUM_EIR8 (32 + 19) /* External interrupt 8 */
+#define VECNUM_EIR9 (32 + 20) /* External interrupt 9 */
+#define VECNUM_CT2 (32 + 21) /* GPT compare timer 2 */
+#define VECNUM_CT3 (32 + 22) /* GPT compare timer 3 */
+#define VECNUM_CT4 (32 + 23) /* GPT compare timer 4 */
+#define VECNUM_SRE (32 + 24) /* Serial ROM error */
+#define VECNUM_GPTDC (32 + 25) /* GPT decrementer pulse */
+#define VECNUM_RSVD0 (32 + 26) /* Reserved */
+#define VECNUM_EPCIPER (32 + 27) /* External PCI PERR */
+#define VECNUM_EIR0 (32 + 28) /* External interrupt 0 */
+#define VECNUM_EWU0 (32 + 29) /* Ethernet 0 wakeup */
+#define VECNUM_EIR1 (32 + 30) /* External interrupt 1 */
+#define VECNUM_EWU1 (32 + 31) /* Ethernet 1 wakeup */
+
+#define VECNUM_TXDE VECNUM_MTDE
+#define VECNUM_RXDE VECNUM_MRDE
+
+/* UIC 2 */
+#define VECNUM_EIR5 (62 + 0) /* External interrupt 5 */
+#define VECNUM_EIR6 (62 + 1) /* External interrupt 6 */
+#define VECNUM_OPB (62 + 2) /* OPB to PLB bridge int stat */
+#define VECNUM_EIR2 (62 + 3) /* External interrupt 2 */
+#define VECNUM_EIR3 (62 + 4) /* External interrupt 3 */
+#define VECNUM_DDR2 (62 + 5) /* DDR2 sdram */
+#define VECNUM_MCTX0 (62 + 6) /* MAl intp coalescence TX0 */
+#define VECNUM_MCTX1 (62 + 7) /* MAl intp coalescence TX1 */
+#define VECNUM_MCTR0 (62 + 8) /* MAl intp coalescence TR0 */
+#define VECNUM_MCTR1 (62 + 9) /* MAl intp coalescence TR1 */
+
+#elif defined(CONFIG_440SPE)
+
/* UIC 0 */
#define VECNUM_U0 0 /* UART0 */
#define VECNUM_U1 1 /* UART1 */
diff --git a/cpu/pxa/Makefile b/cpu/pxa/Makefile
index 1af53d6..cded7ff 100644
--- a/cpu/pxa/Makefile
+++ b/cpu/pxa/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000, 2002
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,21 +23,25 @@
include $(TOPDIR)/config.mk
-LIB = lib$(CPU).a
+LIB = $(obj)lib$(CPU).a
START = start.o
-OBJS = serial.o interrupts.o cpu.o i2c.o pxafb.o mmc.o
+COBJS = serial.o interrupts.o cpu.o i2c.o pxafb.o mmc.o
-all: .depend $(START) $(LIB)
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+START := $(addprefix $(obj),$(START))
+
+all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
- $(AR) crv $@ $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/cpu/s3c44b0/Makefile b/cpu/s3c44b0/Makefile
index d43c73e..790faeb 100644
--- a/cpu/s3c44b0/Makefile
+++ b/cpu/s3c44b0/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2004
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,21 +23,25 @@
include $(TOPDIR)/config.mk
-LIB = lib$(CPU).a
+LIB = $(obj)lib$(CPU).a
START = start.o
-OBJS = serial.o interrupts.o cpu.o
+COBJS = serial.o interrupts.o cpu.o
-all: .depend $(START) $(LIB)
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+START := $(addprefix $(obj),$(START))
+
+all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
- $(AR) crv $@ $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/cpu/sa1100/Makefile b/cpu/sa1100/Makefile
index 8c950da..790faeb 100644
--- a/cpu/sa1100/Makefile
+++ b/cpu/sa1100/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,21 +23,25 @@
include $(TOPDIR)/config.mk
-LIB = lib$(CPU).a
+LIB = $(obj)lib$(CPU).a
START = start.o
-OBJS = serial.o interrupts.o cpu.o
+COBJS = serial.o interrupts.o cpu.o
-all: .depend $(START) $(LIB)
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+START := $(addprefix $(obj),$(START))
+
+all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
- $(AR) crv $@ $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/disk/Makefile b/disk/Makefile
index 39677f1..1a929ce 100644
--- a/disk/Makefile
+++ b/disk/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -25,20 +25,23 @@
#CFLAGS += -DET_DEBUG -DDEBUG
-LIB = libdisk.a
+LIB = $(obj)libdisk.a
-OBJS = part.o part_mac.o part_dos.o part_iso.o part_amiga.o
+COBJS = part.o part_mac.o part_dos.o part_iso.o part_amiga.o
+
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
all: $(LIB)
-$(LIB): $(START) $(OBJS)
- $(AR) crv $@ $(OBJS)
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/doc/README.nand b/doc/README.nand
index f2d6a5b..2b9a529 100644
--- a/doc/README.nand
+++ b/doc/README.nand
@@ -207,3 +207,47 @@
The consequence of this is that the legacy NAND can't be removed from
the tree until the DoC is ported to use the new NAND support (or boards
with DoC will break).
+
+
+
+Additional improvements to the NAND subsystem by Guido Classen, 10-10-2006
+
+JFFS2 related commands:
+
+ implement "nand erase clean" and old "nand erase"
+ using both the new code which is able to skip bad blocks
+ "nand erase clean" additionally writes JFFS2-cleanmarkers in the oob.
+
+ "nand write.jffs2"
+ like "nand write" but skip found bad eraseblocks
+
+ "nand read.jffs2"
+ like "nand read" but skip found bad eraseblocks
+
+Miscellaneous and testing commands:
+ "markbad [offset]"
+ create an artificial bad block (for testing bad block handling)
+
+ "scrub [offset length]"
+ like "erase" but don't skip bad block. Instead erase them.
+ DANGEROUS!!! Factory set bad blocks will be lost. Use only
+ to remove artificial bad blocks created with the "markbad" command.
+
+
+NAND locking command (for chips with active LOCKPRE pin)
+
+ "nand lock"
+ set NAND chip to lock state (all pages locked)
+
+ "nand lock tight"
+ set NAND chip to lock tight state (software can't change locking anymore)
+
+ "nand lock status"
+ displays current locking status of all pages
+
+ "nand unlock [offset] [size]"
+ unlock consecutive area (can be called multiple times for different areas)
+
+
+I have tested the code with board containing 128MiB NAND large page chips
+and 32MiB small page chips.
diff --git a/doc/README.nand-boot-ppc440 b/doc/README.nand-boot-ppc440
new file mode 100644
index 0000000..a1c1d8c
--- /dev/null
+++ b/doc/README.nand-boot-ppc440
@@ -0,0 +1,60 @@
+-----------------------------
+NAND boot on PPC440 platforms
+-----------------------------
+
+This document describes the U-Boot NAND boot feature as it
+is implemented for the AMCC Sequoia (PPC440EPx) board.
+
+The PPC440EP(x)/GR(x) cpu's can boot directly from NAND FLASH,
+completely without NOR FLASH. This can be done by using the NAND
+boot feature of the 440 NAND flash controller (NDFC).
+
+Here a short desciption of the different boot stages:
+
+a) IPL (Initial Program Loader, integrated inside CPU)
+------------------------------------------------------
+Will load first 4k from NAND (SPL) into cache and execute it from there.
+
+b) SPL (Secondary Program Loader)
+---------------------------------
+Will load special U-Boot version (NUB) from NAND and execute it. This SPL
+has to fit into 4kByte. It sets up the CPU and configures the SDRAM
+controller and the NAND controller so that the special U-Boot image can be
+loaded from NAND to SDRAM.
+This special image is build in the directory "nand_spl".
+
+c) NUB (NAND U-Boot)
+--------------------
+This NAND U-Boot (NUB) is a special U-Boot version which can be started
+from RAM. Therefore it mustn't (re-)configure the SDRAM controller.
+
+On 440EPx the SPL is copied to internal SRAM before the NAND controller
+is set up. While still running from cache, I experienced problems accessing
+the NAND controller.
+
+
+Example: Build and install NAND boot image for Sequoia (440EPx):
+
+a) Configure for sequoia with NAND boot support:
+# make sequoia_nand_config
+
+b) Build image(s)
+# make
+
+This will generate the SPL image in the "nand_spl" directory:
+nand_spl/u-boot-spl.bin
+Also another image is created spanning a whole NAND block (16kBytes):
+nand_spl/u-boot-spl-16k.bin
+The main NAND U-Boot image is generated in the toplevel directory:
+u-boot.bin
+A combined image of u-boot-spl-16k.bin and u-boot.bin is also created:
+u-boot-nand.bin
+
+This image should be programmed at offset 0 in the NAND flash:
+
+# tftp 100000 /tftpboot/sequoia/u-boot-nand.bin
+# nand erase 0 60000
+# nand write 100000 0 60000
+
+
+September 07 2006, Stefan Roese <sr@denx.de>
diff --git a/drivers/Makefile b/drivers/Makefile
index 9be95c7..5a7ab71 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2004
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -25,9 +25,9 @@
# CFLAGS += -DET_DEBUG -DDEBUG
-LIB = libdrivers.a
+LIB = $(obj)libdrivers.a
-OBJS = 3c589.o 5701rls.o ali512x.o \
+COBJS = 3c589.o 5701rls.o ali512x.o \
bcm570x.o bcm570x_autoneg.o cfb_console.o cfi_flash.o \
cs8900.o ct69000.o dataflash.o dc2114x.o dm9000x.o \
e1000.o eepro100.o \
@@ -52,16 +52,19 @@
pxa_pcmcia.o mpc8xx_pcmcia.o tqm8xx_pcmcia.o \
rpx_pcmcia.o
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+
all: $(LIB)
-$(LIB): $(OBJS)
- $(AR) crv $@ $(OBJS)
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/drivers/nand/Makefile b/drivers/nand/Makefile
index 96f67df..fb0185b 100644
--- a/drivers/nand/Makefile
+++ b/drivers/nand/Makefile
@@ -1,16 +1,45 @@
+#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
include $(TOPDIR)/config.mk
+LIB := $(obj)libnand.a
+
-LIB := libnand.a
+COBJS := nand.o nand_base.o nand_ids.o nand_ecc.o nand_bbt.o nand_util.o
-OBJS := nand.o nand_base.o nand_ids.o nand_ecc.o nand_bbt.o
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+
all: $(LIB)
-$(LIB): $(OBJS)
- $(AR) crv $@ $(OBJS)
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/drivers/nand/nand_util.c b/drivers/nand/nand_util.c
new file mode 100644
index 0000000..5a8e58a
--- /dev/null
+++ b/drivers/nand/nand_util.c
@@ -0,0 +1,869 @@
+/*
+ * drivers/nand/nand_util.c
+ *
+ * Copyright (C) 2006 by Weiss-Electronic GmbH.
+ * All rights reserved.
+ *
+ * @author: Guido Classen <clagix@gmail.com>
+ * @descr: NAND Flash support
+ * @references: borrowed heavily from Linux mtd-utils code:
+ * flash_eraseall.c by Arcom Control System Ltd
+ * nandwrite.c by Steven J. Hill (sjhill@realitydiluted.com)
+ * and Thomas Gleixner (tglx@linutronix.de)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+
+#if (CONFIG_COMMANDS & CFG_CMD_NAND) && !defined(CFG_NAND_LEGACY)
+
+#include <command.h>
+#include <watchdog.h>
+#include <malloc.h>
+
+#include <nand.h>
+#include <jffs2/jffs2.h>
+
+typedef struct erase_info erase_info_t;
+typedef struct mtd_info mtd_info_t;
+
+/* support only for native endian JFFS2 */
+#define cpu_to_je16(x) (x)
+#define cpu_to_je32(x) (x)
+
+/*****************************************************************************/
+static int nand_block_bad_scrub(struct mtd_info *mtd, loff_t ofs, int getchip)
+{
+ return 0;
+}
+
+/**
+ * nand_erase_opts: - erase NAND flash with support for various options
+ * (jffs2 formating)
+ *
+ * @param meminfo NAND device to erase
+ * @param opts options, @see struct nand_erase_options
+ * @return 0 in case of success
+ *
+ * This code is ported from flash_eraseall.c from Linux mtd utils by
+ * Arcom Control System Ltd.
+ */
+int nand_erase_opts(nand_info_t *meminfo, const nand_erase_options_t *opts)
+{
+ struct jffs2_unknown_node cleanmarker;
+ int clmpos = 0;
+ int clmlen = 8;
+ erase_info_t erase;
+ ulong erase_length;
+ int isNAND;
+ int bbtest = 1;
+ int result;
+ int percent_complete = -1;
+ int (*nand_block_bad_old)(struct mtd_info *, loff_t, int) = NULL;
+ const char *mtd_device = meminfo->name;
+
+ memset(&erase, 0, sizeof(erase));
+
+ erase.mtd = meminfo;
+ erase.len = meminfo->erasesize;
+ if (opts->offset == 0 && opts->length == 0) {
+ /* erase complete chip */
+ erase.addr = 0;
+ erase_length = meminfo->size;
+ } else {
+ /* erase specified region */
+ erase.addr = opts->offset;
+ erase_length = opts->length;
+ }
+
+ isNAND = meminfo->type == MTD_NANDFLASH ? 1 : 0;
+
+ if (opts->jffs2) {
+ cleanmarker.magic = cpu_to_je16 (JFFS2_MAGIC_BITMASK);
+ cleanmarker.nodetype = cpu_to_je16 (JFFS2_NODETYPE_CLEANMARKER);
+ if (isNAND) {
+ struct nand_oobinfo *oobinfo = &meminfo->oobinfo;
+
+ /* check for autoplacement */
+ if (oobinfo->useecc == MTD_NANDECC_AUTOPLACE) {
+ /* get the position of the free bytes */
+ if (!oobinfo->oobfree[0][1]) {
+ printf(" Eeep. Autoplacement selected "
+ "and no empty space in oob\n");
+ return -1;
+ }
+ clmpos = oobinfo->oobfree[0][0];
+ clmlen = oobinfo->oobfree[0][1];
+ if (clmlen > 8)
+ clmlen = 8;
+ } else {
+ /* legacy mode */
+ switch (meminfo->oobsize) {
+ case 8:
+ clmpos = 6;
+ clmlen = 2;
+ break;
+ case 16:
+ clmpos = 8;
+ clmlen = 8;
+ break;
+ case 64:
+ clmpos = 16;
+ clmlen = 8;
+ break;
+ }
+ }
+
+ cleanmarker.totlen = cpu_to_je32(8);
+ } else {
+ cleanmarker.totlen =
+ cpu_to_je32(sizeof(struct jffs2_unknown_node));
+ }
+ cleanmarker.hdr_crc = cpu_to_je32(
+ crc32_no_comp(0, (unsigned char *) &cleanmarker,
+ sizeof(struct jffs2_unknown_node) - 4));
+ }
+
+ /* scrub option allows to erase badblock. To prevent internal
+ * check from erase() method, set block check method to dummy
+ * and disable bad block table while erasing.
+ */
+ if (opts->scrub) {
+ struct nand_chip *priv_nand = meminfo->priv;
+
+ nand_block_bad_old = priv_nand->block_bad;
+ priv_nand->block_bad = nand_block_bad_scrub;
+ /* we don't need the bad block table anymore...
+ * after scrub, there are no bad blocks left!
+ */
+ if (priv_nand->bbt) {
+ kfree(priv_nand->bbt);
+ }
+ priv_nand->bbt = NULL;
+ }
+
+ for (;
+ erase.addr < opts->offset + erase_length;
+ erase.addr += meminfo->erasesize) {
+
+ WATCHDOG_RESET ();
+
+ if (!opts->scrub && bbtest) {
+ int ret = meminfo->block_isbad(meminfo, erase.addr);
+ if (ret > 0) {
+ if (!opts->quiet)
+ printf("\rSkipping bad block at "
+ "0x%08x "
+ " \n",
+ erase.addr);
+ continue;
+
+ } else if (ret < 0) {
+ printf("\n%s: MTD get bad block failed: %d\n",
+ mtd_device,
+ ret);
+ return -1;
+ }
+ }
+
+ result = meminfo->erase(meminfo, &erase);
+ if (result != 0) {
+ printf("\n%s: MTD Erase failure: %d\n",
+ mtd_device, result);
+ continue;
+ }
+
+ /* format for JFFS2 ? */
+ if (opts->jffs2) {
+
+ /* write cleanmarker */
+ if (isNAND) {
+ size_t written;
+ result = meminfo->write_oob(meminfo,
+ erase.addr + clmpos,
+ clmlen,
+ &written,
+ (unsigned char *)
+ &cleanmarker);
+ if (result != 0) {
+ printf("\n%s: MTD writeoob failure: %d\n",
+ mtd_device, result);
+ continue;
+ }
+ } else {
+ printf("\n%s: this erase routine only supports"
+ " NAND devices!\n",
+ mtd_device);
+ }
+ }
+
+ if (!opts->quiet) {
+ int percent = (int)
+ ((unsigned long long)
+ (erase.addr+meminfo->erasesize-opts->offset)
+ * 100 / erase_length);
+
+ /* output progress message only at whole percent
+ * steps to reduce the number of messages printed
+ * on (slow) serial consoles
+ */
+ if (percent != percent_complete) {
+ percent_complete = percent;
+
+ printf("\rErasing at 0x%x -- %3d%% complete.",
+ erase.addr, percent);
+
+ if (opts->jffs2 && result == 0)
+ printf(" Cleanmarker written at 0x%x.",
+ erase.addr);
+ }
+ }
+ }
+ if (!opts->quiet)
+ printf("\n");
+
+ if (nand_block_bad_old) {
+ struct nand_chip *priv_nand = meminfo->priv;
+
+ priv_nand->block_bad = nand_block_bad_old;
+ priv_nand->scan_bbt(meminfo);
+ }
+
+ return 0;
+}
+
+#define MAX_PAGE_SIZE 2048
+#define MAX_OOB_SIZE 64
+
+/*
+ * buffer array used for writing data
+ */
+static unsigned char data_buf[MAX_PAGE_SIZE];
+static unsigned char oob_buf[MAX_OOB_SIZE];
+
+/* OOB layouts to pass into the kernel as default */
+static struct nand_oobinfo none_oobinfo = {
+ .useecc = MTD_NANDECC_OFF,
+};
+
+static struct nand_oobinfo jffs2_oobinfo = {
+ .useecc = MTD_NANDECC_PLACE,
+ .eccbytes = 6,
+ .eccpos = { 0, 1, 2, 3, 6, 7 }
+};
+
+static struct nand_oobinfo yaffs_oobinfo = {
+ .useecc = MTD_NANDECC_PLACE,
+ .eccbytes = 6,
+ .eccpos = { 8, 9, 10, 13, 14, 15}
+};
+
+static struct nand_oobinfo autoplace_oobinfo = {
+ .useecc = MTD_NANDECC_AUTOPLACE
+};
+
+/**
+ * nand_write_opts: - write image to NAND flash with support for various options
+ *
+ * @param meminfo NAND device to erase
+ * @param opts write options (@see nand_write_options)
+ * @return 0 in case of success
+ *
+ * This code is ported from nandwrite.c from Linux mtd utils by
+ * Steven J. Hill and Thomas Gleixner.
+ */
+int nand_write_opts(nand_info_t *meminfo, const nand_write_options_t *opts)
+{
+ int imglen = 0;
+ int pagelen;
+ int baderaseblock;
+ int blockstart = -1;
+ loff_t offs;
+ int readlen;
+ int oobinfochanged = 0;
+ int percent_complete = -1;
+ struct nand_oobinfo old_oobinfo;
+ ulong mtdoffset = opts->offset;
+ ulong erasesize_blockalign;
+ u_char *buffer = opts->buffer;
+ size_t written;
+ int result;
+
+ if (opts->pad && opts->writeoob) {
+ printf("Can't pad when oob data is present.\n");
+ return -1;
+ }
+
+ /* set erasesize to specified number of blocks - to match
+ * jffs2 (virtual) block size */
+ if (opts->blockalign == 0) {
+ erasesize_blockalign = meminfo->erasesize;
+ } else {
+ erasesize_blockalign = meminfo->erasesize * opts->blockalign;
+ }
+
+ /* make sure device page sizes are valid */
+ if (!(meminfo->oobsize == 16 && meminfo->oobblock == 512)
+ && !(meminfo->oobsize == 8 && meminfo->oobblock == 256)
+ && !(meminfo->oobsize == 64 && meminfo->oobblock == 2048)) {
+ printf("Unknown flash (not normal NAND)\n");
+ return -1;
+ }
+
+ /* read the current oob info */
+ memcpy(&old_oobinfo, &meminfo->oobinfo, sizeof(old_oobinfo));
+
+ /* write without ecc? */
+ if (opts->noecc) {
+ memcpy(&meminfo->oobinfo, &none_oobinfo,
+ sizeof(meminfo->oobinfo));
+ oobinfochanged = 1;
+ }
+
+ /* autoplace ECC? */
+ if (opts->autoplace && (old_oobinfo.useecc != MTD_NANDECC_AUTOPLACE)) {
+
+ memcpy(&meminfo->oobinfo, &autoplace_oobinfo,
+ sizeof(meminfo->oobinfo));
+ oobinfochanged = 1;
+ }
+
+ /* force OOB layout for jffs2 or yaffs? */
+ if (opts->forcejffs2 || opts->forceyaffs) {
+ struct nand_oobinfo *oobsel =
+ opts->forcejffs2 ? &jffs2_oobinfo : &yaffs_oobinfo;
+
+ if (meminfo->oobsize == 8) {
+ if (opts->forceyaffs) {
+ printf("YAFSS cannot operate on "
+ "256 Byte page size\n");
+ goto restoreoob;
+ }
+ /* Adjust number of ecc bytes */
+ jffs2_oobinfo.eccbytes = 3;
+ }
+
+ memcpy(&meminfo->oobinfo, oobsel, sizeof(meminfo->oobinfo));
+ }
+
+ /* get image length */
+ imglen = opts->length;
+ pagelen = meminfo->oobblock
+ + ((opts->writeoob != 0) ? meminfo->oobsize : 0);
+
+ /* check, if file is pagealigned */
+ if ((!opts->pad) && ((imglen % pagelen) != 0)) {
+ printf("Input block length is not page aligned\n");
+ goto restoreoob;
+ }
+
+ /* check, if length fits into device */
+ if (((imglen / pagelen) * meminfo->oobblock)
+ > (meminfo->size - opts->offset)) {
+ printf("Image %d bytes, NAND page %d bytes, "
+ "OOB area %u bytes, device size %u bytes\n",
+ imglen, pagelen, meminfo->oobblock, meminfo->size);
+ printf("Input block does not fit into device\n");
+ goto restoreoob;
+ }
+
+ if (!opts->quiet)
+ printf("\n");
+
+ /* get data from input and write to the device */
+ while (imglen && (mtdoffset < meminfo->size)) {
+
+ WATCHDOG_RESET ();
+
+ /*
+ * new eraseblock, check for bad block(s). Stay in the
+ * loop to be sure if the offset changes because of
+ * a bad block, that the next block that will be
+ * written to is also checked. Thus avoiding errors if
+ * the block(s) after the skipped block(s) is also bad
+ * (number of blocks depending on the blockalign
+ */
+ while (blockstart != (mtdoffset & (~erasesize_blockalign+1))) {
+ blockstart = mtdoffset & (~erasesize_blockalign+1);
+ offs = blockstart;
+ baderaseblock = 0;
+
+ /* check all the blocks in an erase block for
+ * bad blocks */
+ do {
+ int ret = meminfo->block_isbad(meminfo, offs);
+
+ if (ret < 0) {
+ printf("Bad block check failed\n");
+ goto restoreoob;
+ }
+ if (ret == 1) {
+ baderaseblock = 1;
+ if (!opts->quiet)
+ printf("\rBad block at 0x%lx "
+ "in erase block from "
+ "0x%x will be skipped\n",
+ (long) offs,
+ blockstart);
+ }
+
+ if (baderaseblock) {
+ mtdoffset = blockstart
+ + erasesize_blockalign;
+ }
+ offs += erasesize_blockalign
+ / opts->blockalign;
+ } while (offs < blockstart + erasesize_blockalign);
+ }
+
+ readlen = meminfo->oobblock;
+ if (opts->pad && (imglen < readlen)) {
+ readlen = imglen;
+ memset(data_buf + readlen, 0xff,
+ meminfo->oobblock - readlen);
+ }
+
+ /* read page data from input memory buffer */
+ memcpy(data_buf, buffer, readlen);
+ buffer += readlen;
+
+ if (opts->writeoob) {
+ /* read OOB data from input memory block, exit
+ * on failure */
+ memcpy(oob_buf, buffer, meminfo->oobsize);
+ buffer += meminfo->oobsize;
+
+ /* write OOB data first, as ecc will be placed
+ * in there*/
+ result = meminfo->write_oob(meminfo,
+ mtdoffset,
+ meminfo->oobsize,
+ &written,
+ (unsigned char *)
+ &oob_buf);
+
+ if (result != 0) {
+ printf("\nMTD writeoob failure: %d\n",
+ result);
+ goto restoreoob;
+ }
+ imglen -= meminfo->oobsize;
+ }
+
+ /* write out the page data */
+ result = meminfo->write(meminfo,
+ mtdoffset,
+ meminfo->oobblock,
+ &written,
+ (unsigned char *) &data_buf);
+
+ if (result != 0) {
+ printf("writing NAND page at offset 0x%lx failed\n",
+ mtdoffset);
+ goto restoreoob;
+ }
+ imglen -= readlen;
+
+ if (!opts->quiet) {
+ int percent = (int)
+ ((unsigned long long)
+ (opts->length-imglen) * 100
+ / opts->length);
+ /* output progress message only at whole percent
+ * steps to reduce the number of messages printed
+ * on (slow) serial consoles
+ */
+ if (percent != percent_complete) {
+ printf("\rWriting data at 0x%x "
+ "-- %3d%% complete.",
+ mtdoffset, percent);
+ percent_complete = percent;
+ }
+ }
+
+ mtdoffset += meminfo->oobblock;
+ }
+
+ if (!opts->quiet)
+ printf("\n");
+
+restoreoob:
+ if (oobinfochanged) {
+ memcpy(&meminfo->oobinfo, &old_oobinfo,
+ sizeof(meminfo->oobinfo));
+ }
+
+ if (imglen > 0) {
+ printf("Data did not fit into device, due to bad blocks\n");
+ return -1;
+ }
+
+ /* return happy */
+ return 0;
+}
+
+/**
+ * nand_read_opts: - read image from NAND flash with support for various options
+ *
+ * @param meminfo NAND device to erase
+ * @param opts read options (@see struct nand_read_options)
+ * @return 0 in case of success
+ *
+ */
+int nand_read_opts(nand_info_t *meminfo, const nand_read_options_t *opts)
+{
+ int imglen = opts->length;
+ int pagelen;
+ int baderaseblock;
+ int blockstart = -1;
+ int percent_complete = -1;
+ loff_t offs;
+ size_t readlen;
+ ulong mtdoffset = opts->offset;
+ u_char *buffer = opts->buffer;
+ int result;
+
+ /* make sure device page sizes are valid */
+ if (!(meminfo->oobsize == 16 && meminfo->oobblock == 512)
+ && !(meminfo->oobsize == 8 && meminfo->oobblock == 256)
+ && !(meminfo->oobsize == 64 && meminfo->oobblock == 2048)) {
+ printf("Unknown flash (not normal NAND)\n");
+ return -1;
+ }
+
+ pagelen = meminfo->oobblock
+ + ((opts->readoob != 0) ? meminfo->oobsize : 0);
+
+ /* check, if length is not larger than device */
+ if (((imglen / pagelen) * meminfo->oobblock)
+ > (meminfo->size - opts->offset)) {
+ printf("Image %d bytes, NAND page %d bytes, "
+ "OOB area %u bytes, device size %u bytes\n",
+ imglen, pagelen, meminfo->oobblock, meminfo->size);
+ printf("Input block is larger than device\n");
+ return -1;
+ }
+
+ if (!opts->quiet)
+ printf("\n");
+
+ /* get data from input and write to the device */
+ while (imglen && (mtdoffset < meminfo->size)) {
+
+ WATCHDOG_RESET ();
+
+ /*
+ * new eraseblock, check for bad block(s). Stay in the
+ * loop to be sure if the offset changes because of
+ * a bad block, that the next block that will be
+ * written to is also checked. Thus avoiding errors if
+ * the block(s) after the skipped block(s) is also bad
+ * (number of blocks depending on the blockalign
+ */
+ while (blockstart != (mtdoffset & (~meminfo->erasesize+1))) {
+ blockstart = mtdoffset & (~meminfo->erasesize+1);
+ offs = blockstart;
+ baderaseblock = 0;
+
+ /* check all the blocks in an erase block for
+ * bad blocks */
+ do {
+ int ret = meminfo->block_isbad(meminfo, offs);
+
+ if (ret < 0) {
+ printf("Bad block check failed\n");
+ return -1;
+ }
+ if (ret == 1) {
+ baderaseblock = 1;
+ if (!opts->quiet)
+ printf("\rBad block at 0x%lx "
+ "in erase block from "
+ "0x%x will be skipped\n",
+ (long) offs,
+ blockstart);
+ }
+
+ if (baderaseblock) {
+ mtdoffset = blockstart
+ + meminfo->erasesize;
+ }
+ offs += meminfo->erasesize;
+
+ } while (offs < blockstart + meminfo->erasesize);
+ }
+
+
+ /* read page data to memory buffer */
+ result = meminfo->read(meminfo,
+ mtdoffset,
+ meminfo->oobblock,
+ &readlen,
+ (unsigned char *) &data_buf);
+
+ if (result != 0) {
+ printf("reading NAND page at offset 0x%lx failed\n",
+ mtdoffset);
+ return -1;
+ }
+
+ if (imglen < readlen) {
+ readlen = imglen;
+ }
+
+ memcpy(buffer, data_buf, readlen);
+ buffer += readlen;
+ imglen -= readlen;
+
+ if (opts->readoob) {
+ result = meminfo->read_oob(meminfo,
+ mtdoffset,
+ meminfo->oobsize,
+ &readlen,
+ (unsigned char *)
+ &oob_buf);
+
+ if (result != 0) {
+ printf("\nMTD readoob failure: %d\n",
+ result);
+ return -1;
+ }
+
+
+ if (imglen < readlen) {
+ readlen = imglen;
+ }
+
+ memcpy(buffer, oob_buf, readlen);
+
+ buffer += readlen;
+ imglen -= readlen;
+ }
+
+ if (!opts->quiet) {
+ int percent = (int)
+ ((unsigned long long)
+ (opts->length-imglen) * 100
+ / opts->length);
+ /* output progress message only at whole percent
+ * steps to reduce the number of messages printed
+ * on (slow) serial consoles
+ */
+ if (percent != percent_complete) {
+ if (!opts->quiet)
+ printf("\rReading data from 0x%x "
+ "-- %3d%% complete.",
+ mtdoffset, percent);
+ percent_complete = percent;
+ }
+ }
+
+ mtdoffset += meminfo->oobblock;
+ }
+
+ if (!opts->quiet)
+ printf("\n");
+
+ if (imglen > 0) {
+ printf("Could not read entire image due to bad blocks\n");
+ return -1;
+ }
+
+ /* return happy */
+ return 0;
+}
+
+/******************************************************************************
+ * Support for locking / unlocking operations of some NAND devices
+ *****************************************************************************/
+
+#define NAND_CMD_LOCK 0x2a
+#define NAND_CMD_LOCK_TIGHT 0x2c
+#define NAND_CMD_UNLOCK1 0x23
+#define NAND_CMD_UNLOCK2 0x24
+#define NAND_CMD_LOCK_STATUS 0x7a
+
+/**
+ * nand_lock: Set all pages of NAND flash chip to the LOCK or LOCK-TIGHT
+ * state
+ *
+ * @param meminfo nand mtd instance
+ * @param tight bring device in lock tight mode
+ *
+ * @return 0 on success, -1 in case of error
+ *
+ * The lock / lock-tight command only applies to the whole chip. To get some
+ * parts of the chip lock and others unlocked use the following sequence:
+ *
+ * - Lock all pages of the chip using nand_lock(mtd, 0) (or the lockpre pin)
+ * - Call nand_unlock() once for each consecutive area to be unlocked
+ * - If desired: Bring the chip to the lock-tight state using nand_lock(mtd, 1)
+ *
+ * If the device is in lock-tight state software can't change the
+ * current active lock/unlock state of all pages. nand_lock() / nand_unlock()
+ * calls will fail. It is only posible to leave lock-tight state by
+ * an hardware signal (low pulse on _WP pin) or by power down.
+ */
+int nand_lock(nand_info_t *meminfo, int tight)
+{
+ int ret = 0;
+ int status;
+ struct nand_chip *this = meminfo->priv;
+
+ /* select the NAND device */
+ this->select_chip(meminfo, 0);
+
+ this->cmdfunc(meminfo,
+ (tight ? NAND_CMD_LOCK_TIGHT : NAND_CMD_LOCK),
+ -1, -1);
+
+ /* call wait ready function */
+ status = this->waitfunc(meminfo, this, FL_WRITING);
+
+ /* see if device thinks it succeeded */
+ if (status & 0x01) {
+ ret = -1;
+ }
+
+ /* de-select the NAND device */
+ this->select_chip(meminfo, -1);
+ return ret;
+}
+
+/**
+ * nand_get_lock_status: - query current lock state from one page of NAND
+ * flash
+ *
+ * @param meminfo nand mtd instance
+ * @param offset page address to query (muss be page aligned!)
+ *
+ * @return -1 in case of error
+ * >0 lock status:
+ * bitfield with the following combinations:
+ * NAND_LOCK_STATUS_TIGHT: page in tight state
+ * NAND_LOCK_STATUS_LOCK: page locked
+ * NAND_LOCK_STATUS_UNLOCK: page unlocked
+ *
+ */
+int nand_get_lock_status(nand_info_t *meminfo, ulong offset)
+{
+ int ret = 0;
+ int chipnr;
+ int page;
+ struct nand_chip *this = meminfo->priv;
+
+ /* select the NAND device */
+ chipnr = (int)(offset >> this->chip_shift);
+ this->select_chip(meminfo, chipnr);
+
+
+ if ((offset & (meminfo->oobblock - 1)) != 0) {
+ printf ("nand_get_lock_status: "
+ "Start address must be beginning of "
+ "nand page!\n");
+ ret = -1;
+ goto out;
+ }
+
+ /* check the Lock Status */
+ page = (int)(offset >> this->page_shift);
+ this->cmdfunc(meminfo, NAND_CMD_LOCK_STATUS, -1, page & this->pagemask);
+
+ ret = this->read_byte(meminfo) & (NAND_LOCK_STATUS_TIGHT
+ | NAND_LOCK_STATUS_LOCK
+ | NAND_LOCK_STATUS_UNLOCK);
+
+ out:
+ /* de-select the NAND device */
+ this->select_chip(meminfo, -1);
+ return ret;
+}
+
+/**
+ * nand_unlock: - Unlock area of NAND pages
+ * only one consecutive area can be unlocked at one time!
+ *
+ * @param meminfo nand mtd instance
+ * @param start start byte address
+ * @param length number of bytes to unlock (must be a multiple of
+ * page size nand->oobblock)
+ *
+ * @return 0 on success, -1 in case of error
+ */
+int nand_unlock(nand_info_t *meminfo, ulong start, ulong length)
+{
+ int ret = 0;
+ int chipnr;
+ int status;
+ int page;
+ struct nand_chip *this = meminfo->priv;
+ printf ("nand_unlock: start: %08x, length: %d!\n",
+ (int)start, (int)length);
+
+ /* select the NAND device */
+ chipnr = (int)(start >> this->chip_shift);
+ this->select_chip(meminfo, chipnr);
+
+ /* check the WP bit */
+ this->cmdfunc(meminfo, NAND_CMD_STATUS, -1, -1);
+ if ((this->read_byte(meminfo) & 0x80) == 0) {
+ printf ("nand_unlock: Device is write protected!\n");
+ ret = -1;
+ goto out;
+ }
+
+ if ((start & (meminfo->oobblock - 1)) != 0) {
+ printf ("nand_unlock: Start address must be beginning of "
+ "nand page!\n");
+ ret = -1;
+ goto out;
+ }
+
+ if (length == 0 || (length & (meminfo->oobblock - 1)) != 0) {
+ printf ("nand_unlock: Length must be a multiple of nand page "
+ "size!\n");
+ ret = -1;
+ goto out;
+ }
+
+ /* submit address of first page to unlock */
+ page = (int)(start >> this->page_shift);
+ this->cmdfunc(meminfo, NAND_CMD_UNLOCK1, -1, page & this->pagemask);
+
+ /* submit ADDRESS of LAST page to unlock */
+ page += (int)(length >> this->page_shift) - 1;
+ this->cmdfunc(meminfo, NAND_CMD_UNLOCK2, -1, page & this->pagemask);
+
+ /* call wait ready function */
+ status = this->waitfunc(meminfo, this, FL_WRITING);
+ /* see if device thinks it succeeded */
+ if (status & 0x01) {
+ /* there was an error */
+ ret = -1;
+ goto out;
+ }
+
+ out:
+ /* de-select the NAND device */
+ this->select_chip(meminfo, -1);
+ return ret;
+}
+
+#endif /* (CONFIG_COMMANDS & CFG_CMD_NAND) && !defined(CFG_NAND_LEGACY) */
diff --git a/drivers/nand_legacy/Makefile b/drivers/nand_legacy/Makefile
index 7e2cf66..95314d8 100644
--- a/drivers/nand_legacy/Makefile
+++ b/drivers/nand_legacy/Makefile
@@ -1,16 +1,45 @@
+#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
include $(TOPDIR)/config.mk
+LIB := $(obj)libnand_legacy.a
+
-LIB := libnand_legacy.a
+COBJS := nand_legacy.o
-OBJS := nand_legacy.o
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+
all: $(LIB)
-$(LIB): $(OBJS)
- $(AR) crv $@ $(OBJS)
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/drivers/ns9750_serial.c b/drivers/ns9750_serial.c
index 8dff367..02c0d39 100644
--- a/drivers/ns9750_serial.c
+++ b/drivers/ns9750_serial.c
@@ -35,6 +35,10 @@
DECLARE_GLOBAL_DATA_PTR;
+#if !defined(CONFIG_CONS_INDEX)
+#error "No console index specified."
+#endif
+
#define CONSOLE CONFIG_CONS_INDEX
static unsigned int calcBitrateRegister( void );
diff --git a/drivers/serial.c b/drivers/serial.c
index 228781b..76425d8 100644
--- a/drivers/serial.c
+++ b/drivers/serial.c
@@ -30,10 +30,20 @@
#include <ns87308.h>
#endif
+#if defined (CONFIG_SERIAL_MULTI)
+#include <serial.h>
+#endif
+
DECLARE_GLOBAL_DATA_PTR;
#if !defined(CONFIG_CONS_INDEX)
+#if defined (CONFIG_SERIAL_MULTI)
+/* with CONFIG_SERIAL_MULTI we might have no console
+ * on these devices
+ */
+#else
#error "No console index specified."
+#endif /* CONFIG_SERIAL_MULTI */
#elif (CONFIG_CONS_INDEX < 1) || (CONFIG_CONS_INDEX > 4)
#error "Invalid console index value."
#endif
@@ -75,7 +85,42 @@
};
#define PORT serial_ports[port-1]
+#if defined(CONFIG_CONS_INDEX)
#define CONSOLE (serial_ports[CONFIG_CONS_INDEX-1])
+#endif
+
+#if defined(CONFIG_SERIAL_MULTI)
+
+/* Multi serial device functions */
+#define DECLARE_ESERIAL_FUNCTIONS(port) \
+ int eserial##port##_init (void) {\
+ int clock_divisor; \
+ clock_divisor = calc_divisor(serial_ports[port-1]); \
+ NS16550_init(serial_ports[port-1], clock_divisor); \
+ return(0);}\
+ void eserial##port##_setbrg (void) {\
+ serial_setbrg_dev(port);}\
+ int eserial##port##_getc (void) {\
+ return serial_getc_dev(port);}\
+ int eserial##port##_tstc (void) {\
+ return serial_tstc_dev(port);}\
+ void eserial##port##_putc (const char c) {\
+ serial_putc_dev(port, c);}\
+ void eserial##port##_puts (const char *s) {\
+ serial_puts_dev(port, s);}
+
+/* Serial device descriptor */
+#define INIT_ESERIAL_STRUCTURE(port,name,bus) {\
+ name,\
+ bus,\
+ eserial##port##_init,\
+ eserial##port##_setbrg,\
+ eserial##port##_getc,\
+ eserial##port##_tstc,\
+ eserial##port##_putc,\
+ eserial##port##_puts, }
+
+#endif /* CONFIG_SERIAL_MULTI */
static int calc_divisor (NS16550_t port)
{
@@ -103,6 +148,7 @@
}
+#if !defined(CONFIG_SERIAL_MULTI)
int serial_init (void)
{
int clock_divisor;
@@ -130,6 +176,7 @@
return (0);
}
+#endif
void
_serial_putc(const char c,const int port)
@@ -176,40 +223,104 @@
NS16550_reinit(PORT, clock_divisor);
}
+#if defined(CONFIG_SERIAL_MULTI)
+static inline void
+serial_putc_dev(unsigned int dev_index,const char c)
+{
+ _serial_putc(c,dev_index);
+}
+#else
void
serial_putc(const char c)
{
_serial_putc(c,CONFIG_CONS_INDEX);
}
+#endif
+#if defined(CONFIG_SERIAL_MULTI)
+static inline void
+serial_putc_raw_dev(unsigned int dev_index,const char c)
+{
+ _serial_putc_raw(c,dev_index);
+}
+#else
void
serial_putc_raw(const char c)
{
_serial_putc_raw(c,CONFIG_CONS_INDEX);
}
+#endif
+#if defined(CONFIG_SERIAL_MULTI)
+static inline void
+serial_puts_dev(unsigned int dev_index,const char *s)
+{
+ _serial_puts(s,dev_index);
+}
+#else
void
serial_puts(const char *s)
{
_serial_puts(s,CONFIG_CONS_INDEX);
}
+#endif
+#if defined(CONFIG_SERIAL_MULTI)
+static inline int
+serial_getc_dev(unsigned int dev_index)
+{
+ return _serial_getc(dev_index);
+}
+#else
int
serial_getc(void)
{
return _serial_getc(CONFIG_CONS_INDEX);
}
+#endif
+#if defined(CONFIG_SERIAL_MULTI)
+static inline int
+serial_tstc_dev(unsigned int dev_index)
+{
+ return _serial_tstc(dev_index);
+}
+#else
int
serial_tstc(void)
{
return _serial_tstc(CONFIG_CONS_INDEX);
}
+#endif
+#if defined(CONFIG_SERIAL_MULTI)
+static inline void
+serial_setbrg_dev(unsigned int dev_index)
+{
+ _serial_setbrg(dev_index);
+}
+#else
void
serial_setbrg(void)
{
_serial_setbrg(CONFIG_CONS_INDEX);
}
+#endif
+
+#if defined(CONFIG_SERIAL_MULTI)
+
+DECLARE_ESERIAL_FUNCTIONS(1);
+struct serial_device eserial1_device =
+ INIT_ESERIAL_STRUCTURE(1,"eserial0","EUART1");
+DECLARE_ESERIAL_FUNCTIONS(2);
+struct serial_device eserial2_device =
+ INIT_ESERIAL_STRUCTURE(2,"eserial1","EUART2");
+DECLARE_ESERIAL_FUNCTIONS(3);
+struct serial_device eserial3_device =
+ INIT_ESERIAL_STRUCTURE(3,"eserial2","EUART3");
+DECLARE_ESERIAL_FUNCTIONS(4);
+struct serial_device eserial4_device =
+ INIT_ESERIAL_STRUCTURE(4,"eserial3","EUART4");
+#endif /* CONFIG_SERIAL_MULTI */
#endif
diff --git a/drivers/sk98lin/Makefile b/drivers/sk98lin/Makefile
index 8ee0e21..7e50b1d 100644
--- a/drivers/sk98lin/Makefile
+++ b/drivers/sk98lin/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2003
+# (C) Copyright 2003-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -24,15 +24,19 @@
#
# Makefile for the SysKonnect SK-98xx device driver.
#
+
include $(TOPDIR)/config.mk
-LIB := libsk98lin.a
+LIB := $(obj)libsk98lin.a
-OBJS := skge.o skaddr.o skgehwt.o skgeinit.o skgepnmi.o skgesirq.o \
- ski2c.o sklm80.o skqueue.o skrlmt.o sktimer.o skvpd.o \
- skxmac2.o skcsum.o #skproc.o
+COBJS := skge.o skaddr.o skgehwt.o skgeinit.o skgepnmi.o skgesirq.o \
+ ski2c.o sklm80.o skqueue.o skrlmt.o sktimer.o skvpd.o \
+ skxmac2.o skcsum.o #skproc.o
-OBJS += uboot_skb.o uboot_drv.o
+COBJS += uboot_skb.o uboot_drv.o
+
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
# DBGDEF = \
# -DDEBUG
@@ -84,18 +88,19 @@
EXTRA_CFLAGS += -I. -DSK_USE_CSUM $(DBGDEF)
CFLAGS += $(EXTRA_CFLAGS)
+HOST_CFLAGS += $(EXTRA_CFLAGS)
all: $(LIB)
-$(LIB): $(OBJS)
- $(AR) crv $@ $(OBJS)
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/dtt/Makefile b/dtt/Makefile
index 0a33478..79d4e9f 100644
--- a/dtt/Makefile
+++ b/dtt/Makefile
@@ -1,4 +1,7 @@
#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
# (C) Copyright 2001
# Erik Theisen, Wave 7 Optics, etheisen@mindspring.com.
#
@@ -25,20 +28,23 @@
#CFLAGS += -DDEBUG
-LIB = libdtt.a
+LIB = $(obj)libdtt.a
-OBJS = lm75.o ds1621.o adm1021.o
+COBJS = lm75.o ds1621.o adm1021.o
+
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
all: $(LIB)
-$(LIB): $(START) $(OBJS)
- $(AR) crv $@ $(OBJS)
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/dtt/lm75.c b/dtt/lm75.c
index 59daa45..63f3b75 100644
--- a/dtt/lm75.c
+++ b/dtt/lm75.c
@@ -146,8 +146,13 @@
/*
* Setup configuraton register
*/
+#ifdef CONFIG_DTT_AD7414
+ /* config = alert active low and disabled */
+ val = 0x60;
+#else
/* config = 6 sample integration, int mode, active low, and enable */
val = 0x18;
+#endif
if (dtt_write(sensor, DTT_CONFIG, val) != 0)
return 1;
diff --git a/examples/Makefile b/examples/Makefile
index a342d75..8706ed4 100644
--- a/examples/Makefile
+++ b/examples/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2004
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -94,6 +94,12 @@
BIN += mem_to_mem_idma2intr.bin mem_to_mem_idma2intr
endif
+# Demo for 52xx IRQs
+ifeq ($(CPU),mpc5xxx)
+SREC += interrupt.srec
+BIN += interrupt.bin interrupt
+endif
+
# Utility for resetting i82559 EEPROM
ifeq ($(BOARD),oxc)
SREC += eepro100_eeprom.srec
@@ -104,9 +110,9 @@
EX_LDFLAGS += -EB
endif
-OBJS = $(SREC:.srec=.o)
+COBJS := $(SREC:.srec=.o)
-LIB = libstubs.a
+LIB = $(obj)libstubs.a
LIBAOBJS=
ifeq ($(ARCH),ppc)
LIBAOBJS+= $(ARCH)_longjmp.o $(ARCH)_setjmp.o
@@ -115,34 +121,40 @@
LIBAOBJS+= test_burst_lib.o
endif
LIBCOBJS= stubs.o
-LIBOBJS = $(LIBAOBJS) $(LIBCOBJS)
+
+LIBOBJS = $(addprefix $(obj),$(LIBAOBJS) $(LIBCOBJS))
+
+SRCS := $(COBJS:.o=.c) $(LIBCOBJS:.o=.c) $(if $(LIBAOBJS),$(LIBAOBJS:.o=.S))
+OBJS := $(addprefix $(obj),$(COBJS))
+BIN := $(addprefix $(obj),$(BIN))
+SREC := $(addprefix $(obj),$(SREC))
gcclibdir := $(shell dirname `$(CC) -print-libgcc-file-name`)
clibdir := $(shell dirname `$(CC) $(CFLAGS) -print-file-name=libc.a`)
CPPFLAGS += -I..
-all: .depend $(OBJS) $(LIB) $(SREC) $(BIN)
+all: $(obj).depend $(OBJS) $(LIB) $(SREC) $(BIN)
#########################################################################
-$(LIB): .depend $(LIBOBJS)
- $(AR) crv $@ $(LIBOBJS)
+$(LIB): $(obj).depend $(LIBOBJS)
+ $(AR) $(ARFLAGS) $@ $(LIBOBJS)
-%: %.o $(LIB)
- $(LD) -g $(EX_LDFLAGS) -Ttext $(LOAD_ADDR) \
- -o $@ -e $(<:.o=) $< $(LIB) \
- -L$(gcclibdir) -lgcc
-%.srec: %
- $(OBJCOPY) -O srec $< $@ 2>/dev/null
+$(obj)%: $(obj)%.o $(LIB)
+ $(LD) -g $(EX_LDFLAGS) -Ttext $(LOAD_ADDR) \
+ -o $@ -e $(notdir $(<:.o=)) $< $(LIB) \
+ -L$(gcclibdir) -lgcc
+$(obj)%.srec: $(obj)%
+ $(OBJCOPY) -O srec $< $@ 2>/dev/null
-%.bin: %
- $(OBJCOPY) -O binary $< $@ 2>/dev/null
+$(obj)%.bin: $(obj)%
+ $(OBJCOPY) -O binary $< $@ 2>/dev/null
#########################################################################
-.depend: Makefile $(OBJS:.o=.c) $(LIBCOBJS:.o=.c) $(LIBAOBJS:.o=.S)
- $(CC) -M $(CFLAGS) $(OBJS:.o=.c) $(LIBCOBJS:.o=.c) $(LIBAOBJS:.o=.S) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/examples/interrupt.c b/examples/interrupt.c
new file mode 100644
index 0000000..f3061d1
--- /dev/null
+++ b/examples/interrupt.c
@@ -0,0 +1,81 @@
+/*
+ * (C) Copyright 2006
+ * Detlev Zundel, DENX Software Engineering, dzu@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * This is a very simple standalone application demonstrating
+ * catching IRQs on the MPC52xx architecture.
+ *
+ * The interrupt to be intercepted can be specified as an argument
+ * to the application. Specifying nothing will intercept IRQ1 on the
+ * MPC5200 platform. On the CR825 carrier board from MicroSys this
+ * maps to the ABORT switch :)
+ *
+ * Note that the specified vector is only a logical number specified
+ * by the respective header file.
+ */
+
+#include <common.h>
+#include <exports.h>
+#include <config.h>
+
+#if defined(CONFIG_MPC5xxx)
+#define DFL_IRQ MPC5XXX_IRQ1
+#else
+#define DFL_IRQ 0
+#endif
+
+static void irq_handler (void *arg);
+
+int interrupt (int argc, char *argv[])
+{
+ int c, irq = -1;
+
+ app_startup (argv);
+
+ if (argc > 1)
+ irq = simple_strtoul (argv[1], NULL, 0);
+ if ((irq < 0) || (irq > NR_IRQS))
+ irq = DFL_IRQ;
+
+ printf ("Installing handler for irq vector %d and doing busy wait\n",
+ irq);
+ printf ("Press 'q' to quit\n");
+
+ /* Install interrupt handler */
+ install_hdlr (irq, irq_handler, NULL);
+ while ((c = getc ()) != 'q') {
+ printf ("Ok, ok, I am still alive!\n");
+ }
+
+ free_hdlr (irq);
+ printf ("\nInterrupt handler has been uninstalled\n");
+
+ return (0);
+}
+
+/*
+ * Handler for interrupt
+ */
+static void irq_handler (void *arg)
+{
+ /* just for demonstration */
+ printf ("+");
+}
diff --git a/fs/Makefile b/fs/Makefile
index 79cbdea..273d90e 100644
--- a/fs/Makefile
+++ b/fs/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000, 2001
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -24,6 +24,6 @@
SUBDIRS := jffs2 cramfs fdos fat reiserfs ext2
-.depend all:
+$(obj).depend all:
@for dir in $(SUBDIRS) ; do \
$(MAKE) -C $$dir $@ ; done
diff --git a/fs/cramfs/Makefile b/fs/cramfs/Makefile
index 54a475e..13c043f 100644
--- a/fs/cramfs/Makefile
+++ b/fs/cramfs/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000, 2001
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,25 +23,27 @@
include $(TOPDIR)/config.mk
-LIB = libcramfs.a
+LIB = $(obj)libcramfs.a
AOBJS =
COBJS = cramfs.o uncompress.o
-OBJS = $(AOBJS) $(COBJS)
+
+SRCS := $(AOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(AOBJS) $(COBJS))
#CPPFLAGS +=
all: $(LIB) $(AOBJS)
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(AOBJS:.o=.S) $(COBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(AOBJS:.o=.S) $(COBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/fs/ext2/Makefile b/fs/ext2/Makefile
index 3b19368..8313cdc 100644
--- a/fs/ext2/Makefile
+++ b/fs/ext2/Makefile
@@ -1,4 +1,7 @@
#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
# (C) Copyright 2003
# Pavel Bartusek, Sysgo Real-Time Solutions AG, pba@sysgo.de
#
@@ -24,25 +27,26 @@
include $(TOPDIR)/config.mk
-LIB = libext2fs.a
+LIB = $(obj)libext2fs.a
AOBJS =
COBJS = ext2fs.o dev.o
-OBJS = $(AOBJS) $(COBJS)
+
+SRCS := $(AOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(AOBJS) $(COBJS))
#CPPFLAGS +=
all: $(LIB) $(AOBJS)
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
-
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(AOBJS:.o=.S) $(COBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(AOBJS:.o=.S) $(COBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/fs/fat/Makefile b/fs/fat/Makefile
index e462757..87af73b 100644
--- a/fs/fat/Makefile
+++ b/fs/fat/Makefile
@@ -19,28 +19,27 @@
# MA 02111-1307 USA
#
-TOPDIR=../../
-
include $(TOPDIR)/config.mk
-LIB = libfat.a
+LIB = $(obj)libfat.a
AOBJS =
COBJS = fat.o file.o
-OBJS = $(AOBJS) $(COBJS)
+SRCS := $(AOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(AOBJS) $(COBJS))
all: $(LIB) $(AOBJS)
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(AOBJS:.o=.S) $(COBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(AOBJS:.o=.S) $(COBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/fs/fdos/Makefile b/fs/fdos/Makefile
index c25e744..2dba0fb 100644
--- a/fs/fdos/Makefile
+++ b/fs/fdos/Makefile
@@ -1,4 +1,7 @@
#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
# (C) Copyright 2002
# Stäubli Faverges - <www.staubli.com>
# Pierre AUBERT p.aubert@staubli.com
@@ -25,25 +28,27 @@
include $(TOPDIR)/config.mk
-LIB = libfdos.a
+LIB = $(obj)libfdos.a
AOBJS =
COBJS = fat.o vfat.o dev.o fdos.o fs.o subdir.o
-OBJS = $(AOBJS) $(COBJS)
+
+SRCS := $(AOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(AOBJS) $(COBJS))
#CPPFLAGS +=
all: $(LIB) $(AOBJS)
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(AOBJS:.o=.S) $(COBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(AOBJS:.o=.S) $(COBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/fs/jffs2/Makefile b/fs/jffs2/Makefile
index f28b17a..c1357d0 100644
--- a/fs/jffs2/Makefile
+++ b/fs/jffs2/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000, 2001
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,26 +23,28 @@
include $(TOPDIR)/config.mk
-LIB = libjffs2.a
+LIB = $(obj)libjffs2.a
AOBJS =
COBJS = jffs2_1pass.o compr_rtime.o compr_rubin.o compr_zlib.o mini_inflate.o
COBJS += compr_lzo.o compr_lzari.o
-OBJS = $(AOBJS) $(COBJS)
+
+SRCS := $(AOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(AOBJS) $(COBJS))
#CPPFLAGS +=
all: $(LIB) $(AOBJS)
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(AOBJS:.o=.S) $(COBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(AOBJS:.o=.S) $(COBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/fs/reiserfs/Makefile b/fs/reiserfs/Makefile
index 98a9a8d..e8711a4 100644
--- a/fs/reiserfs/Makefile
+++ b/fs/reiserfs/Makefile
@@ -1,4 +1,7 @@
#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
# (C) Copyright 2003
# Pavel Bartusek, Sysgo Real-Time Solutions AG, pba@sysgo.de
#
@@ -24,25 +27,26 @@
include $(TOPDIR)/config.mk
-LIB = libreiserfs.a
+LIB = $(obj)libreiserfs.a
AOBJS =
COBJS = reiserfs.o dev.o mode_string.o
-OBJS = $(AOBJS) $(COBJS)
+
+SRCS := $(AOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(AOBJS) $(COBJS))
#CPPFLAGS +=
all: $(LIB) $(AOBJS)
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
-
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(AOBJS:.o=.S) $(COBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(AOBJS:.o=.S) $(COBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/include/405_mal.h b/include/405_mal.h
index 0598586..2a42184 100644
--- a/include/405_mal.h
+++ b/include/405_mal.h
@@ -92,7 +92,7 @@
#define MAL_ESR_PBEI 0x00000001
/* ^^ ^^ */
/* Mal IER */
-#ifdef CONFIG_440SPE
+#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
#define MAL_IER_PT 0x00000080
#define MAL_IER_PRE 0x00000040
#define MAL_IER_PWE 0x00000020
diff --git a/include/440_i2c.h b/include/440_i2c.h
index 9c90a9e..0c2bf36 100644
--- a/include/440_i2c.h
+++ b/include/440_i2c.h
@@ -1,7 +1,8 @@
#ifndef _440_i2c_h_
#define _440_i2c_h_
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
#define I2C_BASE_ADDR (CFG_PERIPHERAL_BASE + 0x00000700)
#else
#define I2C_BASE_ADDR (CFG_PERIPHERAL_BASE + 0x00000400)
diff --git a/include/_exports.h b/include/_exports.h
index 61dcaaf..2b8ec3d 100644
--- a/include/_exports.h
+++ b/include/_exports.h
@@ -12,6 +12,9 @@
EXPORT_FUNC(get_timer)
EXPORT_FUNC(vprintf)
EXPORT_FUNC(do_reset)
+EXPORT_FUNC(getenv)
+EXPORT_FUNC(setenv)
+EXPORT_FUNC(simple_strtoul)
#if (CONFIG_COMMANDS & CFG_CMD_I2C)
EXPORT_FUNC(i2c_write)
EXPORT_FUNC(i2c_read)
diff --git a/include/asm-ppc/processor.h b/include/asm-ppc/processor.h
index 44b23f1..bbd3497 100644
--- a/include/asm-ppc/processor.h
+++ b/include/asm-ppc/processor.h
@@ -728,6 +728,10 @@
#define PVR_440EP_RC 0x422218D4 /* 440EP rev C and 440GR rev B have same PVR */
#define PVR_440GR_RA 0x422218D3 /* 440EP rev B and 440GR rev A have same PVR */
#define PVR_440GR_RB 0x422218D4 /* 440EP rev C and 440GR rev B have same PVR */
+#define PVR_440EPX1_RA 0x216218D0 /* 440EPX rev A with Security / Kasumi */
+#define PVR_440EPX2_RA 0x216218D4 /* 440EPX rev A without Security / Kasumi */
+#define PVR_440GRX1_RA 0x216218D8 /* 440GRX rev A with Security / Kasumi */
+#define PVR_440GRX2_RA 0x216218DC /* 440GRX rev A without Security / Kasumi */
#define PVR_440GX_RA 0x51B21850
#define PVR_440GX_RB 0x51B21851
#define PVR_440GX_RC 0x51B21892
diff --git a/include/asm-ppc/u-boot.h b/include/asm-ppc/u-boot.h
index f7aa55f..794a6d4 100644
--- a/include/asm-ppc/u-boot.h
+++ b/include/asm-ppc/u-boot.h
@@ -108,7 +108,8 @@
#endif
#if defined(CONFIG_405GP) || defined(CONFIG_405EP) || defined (CONFIG_440GX) || \
- defined(CONFIG_440EP) || defined(CONFIG_440GR)
+ defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
unsigned int bi_opbfreq; /* OPB clock in Hz */
int bi_iic_fast[2]; /* Use fast i2c mode */
#endif
diff --git a/include/common.h b/include/common.h
index 9a19001..a873fa9 100644
--- a/include/common.h
+++ b/include/common.h
@@ -109,6 +109,12 @@
#define debugX(level,fmt,args...)
#endif /* DEBUG */
+#define BUG() do { \
+ printf("BUG: failure at %s:%d/%s()!\n", __FILE__, __LINE__, __FUNCTION__); \
+ panic("BUG!"); \
+} while (0)
+#define BUG_ON(condition) do { if (unlikely((condition)!=0)) BUG(); } while(0)
+
typedef void (interrupt_handler_t)(void *);
#include <asm/u-boot.h> /* boot information for Linux kernel */
diff --git a/include/configs/CPCI440.h b/include/configs/CPCI440.h
index a5bc773..90d3a8d 100644
--- a/include/configs/CPCI440.h
+++ b/include/configs/CPCI440.h
@@ -31,7 +31,8 @@
/*-----------------------------------------------------------------------
* High Level Configuration Options
*----------------------------------------------------------------------*/
-#define CONFIG_EBONY 1 /* Board is ebony */
+#define CONFIG_CPCI440 1 /* Board is ebony */
+#define CONFIG_440GP 1 /* Specifc GP support */
#define CONFIG_4xx 1 /* ... PPC4xx family */
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
#undef CFG_DRAM_TEST /* Disable-takes long time! */
diff --git a/include/configs/CPU87.h b/include/configs/CPU87.h
index 7a1dada..ce969ec 100644
--- a/include/configs/CPU87.h
+++ b/include/configs/CPU87.h
@@ -527,7 +527,7 @@
PSDMR_LDOTOPRE_1C |\
PSDMR_WRC_1C |\
PSDMR_CL_2)
-
+
/*
* Init Memory Controller:
*
diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h
index 31e3eed..897d1b2 100644
--- a/include/configs/TQM5200.h
+++ b/include/configs/TQM5200.h
@@ -63,7 +63,7 @@
#define CFG_DEVICE_NULLDEV 1 /* enable null device */
#define CONFIG_SILENT_CONSOLE 1 /* enable silent startup */
#define CONFIG_BOARD_EARLY_INIT_F 1 /* used to detect S1 switch position */
-
+#define CONFIG_USB_BIN_FIXUP 1 /* for a buggy USB device */
#if 0
#define FO300_SILENT_CONSOLE_WHEN_S1_CLOSED 1 /* silent console on PSC1 when S1 */
/* switch is closed */
@@ -285,7 +285,7 @@
*/
#define CFG_IPBSPEED_133 /* define for 133MHz speed */
-#if defined(CFG_IPBSPEED_133)
+#if defined(CFG_IPBSPEED_133) && !defined(CONFIG_CAM5200)
/*
* PCI Bus clocking configuration
*
@@ -349,13 +349,29 @@
*/
#define CFG_FLASH_BASE 0xFC000000
+#ifndef CONFIG_CAM5200
/* use CFI flash driver */
#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */
#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */
#define CFG_FLASH_BANKS_LIST { CFG_BOOTCS_START }
+#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks
+ (= chip selects) */
+#define CFG_MAX_FLASH_SECT 512 /* max num of sects on one chip */
+#else /* CONFIG_CAM5200 */
+#define CFG_MAX_FLASH_BANKS 2 /* max num of flash banks
+ (= chip selects) */
+#define CFG_FLASH_WORD_SIZE unsigned int /* main flash device with */
+#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+
+#define CFG_FLASH_ADDR0 0x555
+#define CFG_FLASH_ADDR1 0x2AA
+#define CFG_FLASH_2ND_16BIT_DEV 1 /* NIOS flash is a 16bit device */
+#define CFG_MAX_FLASH_SECT 128
+#endif /* ifndef CONFIG_CAM5200 */
+
#define CFG_FLASH_EMPTY_INFO
#define CFG_FLASH_SIZE 0x04000000 /* 64 MByte */
-#define CFG_MAX_FLASH_SECT 512 /* max num of sects on one chip */
#define CFG_FLASH_USE_BUFFER_WRITE 1
#if defined (CONFIG_CAM5200)
@@ -366,9 +382,6 @@
# define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x00060000)
#endif
-#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks
- (= chip selects) */
-
/* Dynamic MTD partition support */
#define CONFIG_JFFS2_CMDLINE
#define MTDIDS_DEFAULT "nor0=TQM5200-0"
@@ -401,10 +414,8 @@
#elif defined (CONFIG_CAM5200)
# define MTDPARTS_DEFAULT "mtdparts=TQM5200-0:768k(firmware)," \
"1792k(kernel)," \
- "3584k(small-fs)," \
- "2m(initrd)," \
- "8m(misc)," \
- "16m(big-fs)"
+ "5632k(rootfs)," \
+ "24m(home)"
#elif defined (CONFIG_FO300)
# define MTDPARTS_DEFAULT "mtdparts=TQM5200-0:640k(firmware)," \
"1408k(kernel)," \
@@ -479,31 +490,43 @@
/*
* GPIO configuration
*
- * use pin gpio_wkup_6 as second SDRAM chip select (mem_cs1):
- * Bit 0 (mask: 0x80000000): 1
+ * use CS1: Bit 0 (mask: 0x80000000):
+ * 1 -> Pin gpio_wkup_6 as second SDRAM chip select (mem_cs1).
* use ALT CAN position: Bits 2-3 (mask: 0x30000000):
- * 00 -> No Alternatives, CAN1/2 on PSC2 according to PSC2 setting.
- * 01 -> CAN1 on I2C1, CAN2 on Tmr0/1.
- * Use for REV200 STK52XX boards and FO300 boards. Do not use
- * with REV100 modules (because, there I2C1 is used as I2C bus)
- * use PSC1 as UART: Bits 28-31 (mask: 0x00000007): 0100
- * use PSC2 as CAN: Bits 25:27 (mask: 0x00000030)
- * 000 -> All PSC2 pins are GIOPs
- * 001 -> CAN1/2 on PSC2 pins
- * Use for REV100 STK52xx boards
- * 01x -> Use AC97
- * use PSC3: Bits 20-23 (mask: 0x00000f00)
- * 1100 -> UART/SPI (on FO300 board)
- * use PSC6:
- * on STK52xx and FO300:
- * use as UART. Pins PSC6_0 to PSC6_3 are used.
- * Bits 9:11 (mask: 0x00700000):
- * 101 -> PSC6 : Extended POST test is not available
- * on MINI-FAP and TQM5200_IB:
- * use PSC6_0 to PSC6_3 as GPIO: Bits 9:11 (mask: 0x00700000):
- * 000 -> PSC6 could not be used as UART, CODEC or IrDA
- * GPIO on PSC6_3 is used in post_hotkeys_pressed() to enable extended POST
- * tests.
+ * 00 -> No Alternatives, CAN1/2 on PSC2 according to PSC2 setting.
+ * SPI on PSC3 according to PSC3 setting. Use for CAM5200.
+ * 01 -> CAN1 on I2C1, CAN2 on Tmr0/1.
+ * Use for REV200 STK52XX boards and FO300 boards. Do not use
+ * with REV100 modules (because, there I2C1 is used as I2C bus).
+ * use ATA: Bits 6-7 (mask 0x03000000):
+ * 00 -> No ATA chip selects, csb_4/5 used as normal chip selects.
+ * Use for CAM5200 board.
+ * 01 -> ATA cs0/1 on csb_4/5. Use for the remaining boards.
+ * use PSC6: Bits 9-11 (mask 0x00700000):
+ * 000 -> use PSC6_0 to PSC6_3 as GPIO, PSC6 could not be used as
+ * UART, CODEC or IrDA.
+ * GPIO on PSC6_3 is used in post_hotkeys_pressed() to
+ * enable extended POST tests.
+ * Use for MINI-FAP and TQM5200_IB boards.
+ * 101 -> use PSC6 as UART. Pins PSC6_0 to PSC6_3 are used.
+ * Extended POST test is not available.
+ * Use for STK52xx, FO300 and CAM5200 boards.
+ * use PCI_DIS: Bit 16 (mask 0x00008000):
+ * 1 -> disable PCI controller (on CAM5200 board).
+ * use USB: Bits 18-19 (mask 0x00003000):
+ * 10 -> two UARTs (on FO300 and CAM5200).
+ * use PSC3: Bits 20-23 (mask: 0x00000f00):
+ * 0000 -> All PSC3 pins are GPIOs.
+ * 1100 -> UART/SPI (on FO300 board).
+ * 0100 -> UART (on CAM5200 board).
+ * use PSC2: Bits 25:27 (mask: 0x00000030):
+ * 000 -> All PSC2 pins are GPIOs.
+ * 100 -> UART (on CAM5200 board).
+ * 001 -> CAN1/2 on PSC2 pins.
+ * Use for REV100 STK52xx boards
+ * 01x -> Use AC97 (on FO300 board).
+ * use PSC1: Bits 29-31 (mask: 0x00000007):
+ * 100 -> UART (on all boards).
*/
#if defined (CONFIG_MINIFAP)
# define CFG_GPS_PORT_CONFIG 0x91000004
@@ -519,6 +542,8 @@
# endif
#elif defined (CONFIG_FO300)
# define CFG_GPS_PORT_CONFIG 0x91502c24
+#elif defined (CONFIG_CAM5200)
+# define CFG_GPS_PORT_CONFIG 0x8050A444
#else /* TMQ5200 Inbetriebnahme-Board */
# define CFG_GPS_PORT_CONFIG 0x81000004
#endif
@@ -613,6 +638,16 @@
#define CFG_CS_BURST 0x00000000
#define CFG_CS_DEADCYCLE 0x33333311 /* 1 dead cycle for flash and SM501 */
+#if defined(CONFIG_CAM5200)
+#define CFG_CS4_START 0xB0000000
+#define CFG_CS4_SIZE 0x00010000
+#define CFG_CS4_CFG 0x01019C10
+
+#define CFG_CS5_START 0xD0000000
+#define CFG_CS5_SIZE 0x01208000
+#define CFG_CS5_CFG 0x1414BF10
+#endif
+
#define CFG_RESET_ADDRESS 0xff000000
/*-----------------------------------------------------------------------
diff --git a/include/configs/bamboo.h b/include/configs/bamboo.h
index cd4339b..4961011 100644
--- a/include/configs/bamboo.h
+++ b/include/configs/bamboo.h
@@ -73,6 +73,7 @@
/*-----------------------------------------------------------------------
* Initial RAM & stack pointer (placed in SDRAM)
*----------------------------------------------------------------------*/
+#define CFG_INIT_RAM_DCACHE 1 /* d-cache as init ram */
#define CFG_INIT_RAM_ADDR 0x70000000 /* DCache */
#define CFG_INIT_RAM_END (4 << 10)
#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */
diff --git a/include/configs/ep82xxm.h b/include/configs/ep82xxm.h
new file mode 100644
index 0000000..5d7bed6
--- /dev/null
+++ b/include/configs/ep82xxm.h
@@ -0,0 +1,395 @@
+/*
+ * Copyright (C) 2006 Embedded Planet, LLC.
+ *
+ * U-Boot configuration for Embedded Planet EP82xxM boards.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CONFIG_MPC8260
+#define CPU_ID_STR "MPC8270"
+
+#define CONFIG_EP82XXM /* Embedded Planet EP82xxM H 1.0 board /*
+ /* 256MB SDRAM / 64MB FLASH */
+
+#undef DEBUG
+
+#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
+
+/* Allow serial number (serial#) and MAC address (ethaddr) to be overwritten */
+#define CONFIG_ENV_OVERWRITE
+
+/*
+ * Select serial console configuration
+ *
+ * If either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then
+ * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4
+ * for SCC).
+ */
+#define CONFIG_CONS_ON_SMC /* Console is on SMC */
+#undef CONFIG_CONS_ON_SCC /* It's not on SCC */
+#undef CONFIG_CONS_NONE /* It's not on external UART */
+#define CONFIG_CONS_INDEX 1 /* SMC1 is used for console */
+
+#define CFG_BCSR 0xFA000000
+
+/*
+ * Select ethernet configuration
+ *
+ * If either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected,
+ * then CONFIG_ETHER_INDEX must be set to the channel number (1-4 for
+ * SCC, 1-3 for FCC)
+ *
+ * If CONFIG_ETHER_NONE is defined, then either the ethernet routines
+ * must be defined elsewhere (as for the console), or CFG_CMD_NET must
+ * be removed from CONFIG_COMMANDS to remove support for networking.
+ */
+#undef CONFIG_ETHER_ON_SCC /* Ethernet is not on SCC */
+#define CONFIG_ETHER_ON_FCC /* Ethernet is on FCC */
+#undef CONFIG_ETHER_NONE /* No external Ethernet */
+
+#define CONFIG_NET_MULTI
+
+#define CONFIG_ETHER_ON_FCC2
+#define CONFIG_ETHER_ON_FCC3
+
+#define CFG_CMXFCR_MASK3 (CMXFCR_FC3 | CMXFCR_RF3CS_MSK | CMXFCR_TF3CS_MSK)
+#define CFG_CMXFCR_VALUE3 (CMXFCR_RF3CS_CLK15 | CMXFCR_TF3CS_CLK16)
+#define CFG_CMXFCR_MASK2 (CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
+#define CFG_CMXFCR_VALUE2 (CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14)
+
+#define CFG_CPMFCR_RAMTYPE 0
+#define CFG_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB)
+
+#define CONFIG_MII /* MII PHY management */
+#define CONFIG_BITBANGMII /* Bit-banged MDIO interface */
+
+/*
+ * GPIO pins used for bit-banged MII communications
+ */
+#define MDIO_PORT 0 /* Not used - implemented in BCSR */
+#define MDIO_ACTIVE (*(vu_char *)(CFG_BCSR + 8) &= 0xFB)
+#define MDIO_TRISTATE (*(vu_char *)(CFG_BCSR + 8) |= 0x04)
+#define MDIO_READ (*(vu_char *)(CFG_BCSR + 8) & 1)
+
+#define MDIO(bit) if(bit) *(vu_char *)(CFG_BCSR + 8) |= 0x01; \
+ else *(vu_char *)(CFG_BCSR + 8) &= 0xFE
+
+#define MDC(bit) if(bit) *(vu_char *)(CFG_BCSR + 8) |= 0x02; \
+ else *(vu_char *)(CFG_BCSR + 8) &= 0xFD
+
+#define MIIDELAY udelay(1)
+
+
+#ifndef CONFIG_8260_CLKIN
+#define CONFIG_8260_CLKIN 66000000 /* in Hz */
+#endif
+
+#define CONFIG_BAUDRATE 115200
+
+#define CFG_VXWORKS_MAC_PTR 0x4300 /* Pass Ethernet MAC to VxWorks */
+
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
+ | CFG_CMD_DHCP \
+ | CFG_CMD_ECHO \
+ | CFG_CMD_I2C \
+ | CFG_CMD_IMMAP \
+ | CFG_CMD_MII \
+ | CFG_CMD_PING \
+ | CFG_CMD_DATE \
+ | CFG_CMD_DTT \
+ | CFG_CMD_EEPROM \
+ | CFG_CMD_PCI \
+ | CFG_CMD_DIAG \
+ )
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#define CONFIG_ETHADDR 00:10:EC:00:88:65
+#define CONFIG_HAS_ETH1
+#define CONFIG_ETH1ADDR 00:10:EC:80:88:65
+#define CONFIG_IPADDR 10.0.0.245
+#define CONFIG_HOSTNAME EP82xxM
+#define CONFIG_SERVERIP 10.0.0.26
+#define CONFIG_GATEWAYIP 10.0.0.1
+#define CONFIG_NETMASK 255.255.255.0
+#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
+#define CFG_ENV_IN_OWN_SECT 1
+#define CFG_AUTO_COMPLETE
+#define CONFIG_EXTRA_ENV_SETTINGS "ethprime=FCC3 ETHERNET"
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#undef CONFIG_KGDB_ON_SMC /* define if kgdb on SMC */
+#define CONFIG_KGDB_ON_SCC /* define if kgdb on SCC */
+#undef CONFIG_KGDB_NONE /* define if kgdb on something else */
+#define CONFIG_KGDB_INDEX 1 /* which serial channel for kgdb */
+#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port at */
+#endif
+
+#define CONFIG_BZIP2 /* include support for bzip2 compressed images */
+#undef CONFIG_WATCHDOG /* disable platform specific watchdog */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "ep82xxm=> " /* Monitor Command Prompt */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0x00100000 /* memtest works on */
+#define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
+
+#define CFG_LOAD_ADDR 0x100000 /* default load address */
+
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
+
+/*-----------------------------------------------------------------------
+ * Environment
+ *----------------------------------------------------------------------*/
+/*
+ * Define here the location of the environment variables (FLASH or EEPROM).
+ * Note: DENX encourages to use redundant environment in FLASH.
+ */
+#if 1
+#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
+#else
+#define CFG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */
+#endif
+
+/*-----------------------------------------------------------------------
+ * FLASH related
+ *----------------------------------------------------------------------*/
+#define CFG_FLASH_BASE 0xFC000000
+#define CFG_FLASH_CFI
+#define CFG_FLASH_CFI_DRIVER
+#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks */
+#define CFG_MAX_FLASH_SECT 512 /* max num of sects on one chip */
+#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector in flinfo */
+
+#ifdef CFG_ENV_IS_IN_FLASH
+#define CFG_ENV_SECT_SIZE 0x20000
+#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
+#endif /* CFG_ENV_IS_IN_FLASH */
+
+/*-----------------------------------------------------------------------
+ * I2C
+ *----------------------------------------------------------------------*/
+/* EEPROM Configuration */
+#define CFG_EEPROM_SIZE 0x1000
+#define CFG_I2C_EEPROM_ADDR 0x54
+#define CFG_I2C_EEPROM_ADDR_LEN 1
+#define CFG_EEPROM_PAGE_WRITE_BITS 3
+#define CFG_EEPROM_PAGE_WRITE_ENABLE
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
+
+#ifdef CFG_ENV_IS_IN_EEPROM
+#define CFG_ENV_SIZE 0x200 /* Size of Environment vars */
+#define CFG_ENV_OFFSET 0x0
+#endif /* CFG_ENV_IS_IN_EEPROM */
+
+/* RTC Configuration */
+#define CONFIG_RTC_M41T11 1 /* uses a M41T81 */
+#define CFG_I2C_RTC_ADDR 0x68
+#define CONFIG_M41T11_BASE_YEAR 1900
+
+/* I2C SYSMON (LM75) */
+#define CONFIG_DTT_LM75 1
+#define CONFIG_DTT_SENSORS {0}
+#define CFG_DTT_MAX_TEMP 70
+#define CFG_DTT_LOW_TEMP -30
+#define CFG_DTT_HYSTERESIS 3
+
+/*-----------------------------------------------------------------------
+ * NVRAM Configuration
+ *-----------------------------------------------------------------------
+ */
+#define CFG_NVRAM_BASE_ADDR 0xFA080000
+#define CFG_NVRAM_SIZE (128*1024)-16
+
+
+/*-----------------------------------------------------------------------
+ * PCI stuff
+ *-----------------------------------------------------------------------
+ */
+/* General PCI */
+#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_PNP /* do pci plug-and-play */
+#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
+#define CONFIG_PCI_BOOTDELAY 0
+
+/* PCI Memory map (if different from default map */
+#define CFG_PCI_SLV_MEM_LOCAL CFG_SDRAM_BASE /* Local base */
+#define CFG_PCI_SLV_MEM_BUS 0x00000000 /* PCI base */
+#define CFG_PICMR0_MASK_ATTRIB (PICMR_MASK_512MB | PICMR_ENABLE | \
+ PICMR_PREFETCH_EN)
+
+/*
+ * These are the windows that allow the CPU to access PCI address space.
+ * All three PCI master windows, which allow the CPU to access PCI
+ * prefetch, non prefetch, and IO space (see below), must all fit within
+ * these windows.
+ */
+
+/*
+ * Master window that allows the CPU to access PCI Memory (prefetch).
+ * This window will be setup with the second set of Outbound ATU registers
+ * in the bridge.
+ */
+
+#define CFG_PCI_MSTR_MEM_LOCAL 0x80000000 /* Local base */
+#define CFG_PCI_MSTR_MEM_BUS 0x80000000 /* PCI base */
+#define CFG_CPU_PCI_MEM_START PCI_MSTR_MEM_LOCAL
+#define CFG_PCI_MSTR_MEM_SIZE 0x20000000 /* 512MB */
+#define CFG_POCMR0_MASK_ATTRIB (POCMR_MASK_512MB | POCMR_ENABLE | POCMR_PREFETCH_EN)
+
+/*
+ * Master window that allows the CPU to access PCI Memory (non-prefetch).
+ * This window will be setup with the second set of Outbound ATU registers
+ * in the bridge.
+ */
+
+#define CFG_PCI_MSTR_MEMIO_LOCAL 0xA0000000 /* Local base */
+#define CFG_PCI_MSTR_MEMIO_BUS 0xA0000000 /* PCI base */
+#define CFG_CPU_PCI_MEMIO_START PCI_MSTR_MEMIO_LOCAL
+#define CFG_PCI_MSTR_MEMIO_SIZE 0x20000000 /* 512MB */
+#define CFG_POCMR1_MASK_ATTRIB (POCMR_MASK_512MB | POCMR_ENABLE)
+
+/*
+ * Master window that allows the CPU to access PCI IO space.
+ * This window will be setup with the first set of Outbound ATU registers
+ * in the bridge.
+ */
+
+#define CFG_PCI_MSTR_IO_LOCAL 0xF6000000 /* Local base */
+#define CFG_PCI_MSTR_IO_BUS 0x00000000 /* PCI base */
+#define CFG_CPU_PCI_IO_START PCI_MSTR_IO_LOCAL
+#define CFG_PCI_MSTR_IO_SIZE 0x02000000 /* 64MB */
+#define CFG_POCMR2_MASK_ATTRIB (POCMR_MASK_32MB | POCMR_ENABLE | POCMR_PCI_IO)
+
+
+/* PCIBR0 - for PCI IO*/
+#define CFG_PCI_MSTR0_LOCAL CFG_PCI_MSTR_IO_LOCAL /* Local base */
+#define CFG_PCIMSK0_MASK ~(CFG_PCI_MSTR_IO_SIZE - 1U) /* Size of window */
+/* PCIBR1 - prefetch and non-prefetch regions joined together */
+#define CFG_PCI_MSTR1_LOCAL CFG_PCI_MSTR_MEM_LOCAL
+#define CFG_PCIMSK1_MASK ~(CFG_PCI_MSTR_MEM_SIZE + CFG_PCI_MSTR_MEMIO_SIZE - 1U)
+
+
+#define CFG_DIRECT_FLASH_TFTP
+
+#if (CONFIG_COMMANDS & CFG_CMD_JFFS2)
+#define CFG_JFFS2_FIRST_BANK 0
+#define CFG_JFFS2_NUM_BANKS CFG_MAX_FLASH_BANKS
+#define CFG_JFFS2_FIRST_SECTOR 0
+#define CFG_JFFS2_LAST_SECTOR 62
+#define CFG_JFFS2_SORT_FRAGMENTS
+#define CFG_JFFS_CUSTOM_PART
+#endif /* CFG_CMD_JFFS2 */
+
+#if (CONFIG_COMMANDS & CFG_CMD_I2C)
+#define CONFIG_HARD_I2C 1 /* To enable I2C support */
+#define CFG_I2C_SPEED 100000 /* I2C speed */
+#define CFG_I2C_SLAVE 0x7F /* I2C slave address */
+#endif /* CFG_CMD_I2C */
+
+#define CFG_MONITOR_BASE TEXT_BASE
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+#define CFG_RAMBOOT
+#endif
+
+#define CFG_MONITOR_LEN (512 << 10) /* Reserve 256KB for Monitor */
+
+#define CFG_DEFAULT_IMMR 0x00010000
+#define CFG_IMMR 0xF0000000
+
+#define CFG_INIT_RAM_ADDR CFG_IMMR
+#define CFG_INIT_RAM_END 0x2000 /* End of used area in DPRAM */
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+
+/* Hard reset configuration word */
+#define CFG_HRCW_MASTER 0 /*0x1C800641*/ /* Not used - provided by CPLD */
+/* No slaves */
+#define CFG_HRCW_SLAVE1 0
+#define CFG_HRCW_SLAVE2 0
+#define CFG_HRCW_SLAVE3 0
+#define CFG_HRCW_SLAVE4 0
+#define CFG_HRCW_SLAVE5 0
+#define CFG_HRCW_SLAVE6 0
+#define CFG_HRCW_SLAVE7 0
+
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#define CFG_MALLOC_LEN (4096 << 10) /* Reserve 4 MB for malloc() */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
+#define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPUs */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
+#define CFG_HID0_INIT 0
+#define CFG_HID0_FINAL 0
+
+#define CFG_HID2 0
+
+#define CFG_SIUMCR 0x02610000
+#define CFG_SYPCR 0xFFFF0689
+#define CFG_BCR 0x8080E000
+#define CFG_SCCR 0x00000001
+
+#define CFG_RMR 0
+#define CFG_TMCNTSC 0x000000C3
+#define CFG_PISCR 0x00000083
+#define CFG_RCCR 0
+
+#define CFG_MPTPR 0x0A00
+#define CFG_PSDMR 0xC432246E
+#define CFG_PSRT 0x32
+
+#define CFG_SDRAM_BASE 0x00000000
+#define CFG_SDRAM_BR (CFG_SDRAM_BASE | 0x00000041)
+#define CFG_SDRAM_OR 0xF0002900
+
+#define CFG_BR0_PRELIM (CFG_FLASH_BASE | 0x00001801)
+#define CFG_OR0_PRELIM 0xFC000882
+#define CFG_BR4_PRELIM (CFG_BCSR | 0x00001001)
+#define CFG_OR4_PRELIM 0xFFF00050
+
+#define CFG_RESET_ADDRESS 0xFFF00100
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/mcc200.h b/include/configs/mcc200.h
index 563f797..0c935bf 100644
--- a/include/configs/mcc200.h
+++ b/include/configs/mcc200.h
@@ -37,12 +37,12 @@
#define CONFIG_MISC_INIT_R
-#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM 0x02 /* Software reboot */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
+#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
/*
@@ -55,17 +55,32 @@
*
* CONFIG_PSC_CONSOLE must be undefined in this case.
*/
+#if !defined(CONFIG_PRS200)
+/* MCC200 configuration: */
#ifdef CONFIG_CONSOLE_COM12
#define CONFIG_QUART_CONSOLE 6 /* console is on UARTF of QUART2 */
#else
#define CONFIG_QUART_CONSOLE 8 /* console is on UARTH of QUART2 */
#endif
+#else
+/* PRS200 configuration: */
+#undef CONFIG_QUART_CONSOLE
+#endif /* CONFIG_PRS200 */
/*
* To select console on PSC1, define CONFIG_PSC_CONSOLE as 1
* and undefine CONFIG_QUART_CONSOLE.
*/
-/*#define CONFIG_PSC_CONSOLE 1 */ /* console is on PSC1 */
-#if defined(CONFIG_QUART_CONSOLE) && defined(CONFIG_PSC_CONSOLE)
+#if !defined(CONFIG_PRS200)
+/* MCC200 configuration: */
+#define CONFIG_SERIAL_MULTI 1
+#define CONFIG_PSC_CONSOLE 1 /* PSC1 may be COM */
+#define CONFIG_PSC_CONSOLE2 2 /* PSC2 is PSoC */
+#else
+/* PRS200 configuration: */
+#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */
+#endif
+#if defined(CONFIG_QUART_CONSOLE) && defined(CONFIG_PSC_CONSOLE) && \
+ !defined(CONFIG_SERIAL_MULTI)
#error "Select only one console device!"
#endif
#define CONFIG_BAUDRATE 115200
@@ -77,7 +92,7 @@
/* USB */
#define CONFIG_USB_OHCI
-#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT
+#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT
#define CONFIG_USB_STORAGE
/*
@@ -103,33 +118,46 @@
#undef CONFIG_BOOTARGS
+#define XMK_STR(x) #x
+#define MK_STR(x) XMK_STR(x)
+
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#ifdef CONFIG_PRS200
+# define CFG__BOARDNAME "prs200"
+# define CFG__LINUX_CONSOLE "ttyS0"
+#else
+# define CFG__BOARDNAME "mcc200"
+# define CFG__LINUX_CONSOLE "ttyEU7"
+#endif
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
- "hostname=mcc200\0" \
+ "hostname=" CFG__BOARDNAME "\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
"nfsroot=${serverip}:${rootpath}\0" \
"ramargs=setenv bootargs root=/dev/ram rw\0" \
"addip=setenv bootargs ${bootargs} " \
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
":${hostname}:${netdev}:off panic=1\0" \
- "flash_nfs=run nfsargs addip;" \
+ "addcons=setenv bootargs ${bootargs} " \
+ "console=${console},${baudrate}\0" \
+ "flash_nfs=run nfsargs addip addcons;" \
"bootm ${kernel_addr}\0" \
- "flash_self=run ramargs addip;" \
+ "flash_self=run ramargs addip addcons;" \
"bootm ${kernel_addr} ${ramdisk_addr}\0" \
- "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \
+ "net_nfs=tftp 200000 ${bootfile};" \
+ "run nfsargs addip addcons;bootm\0" \
+ "console=" CFG__LINUX_CONSOLE "\0" \
"rootpath=/opt/eldk/ppc_6xx\0" \
- "bootfile=/tftpboot/mcc200/uImage\0" \
- "baudrate=115200\0" \
- "load=tftp 200000 /tftpboot/mcc200/u-boot.bin\0" \
- "update=protect off FFF00000 +${filesize};" \
- "era FFF00000 +${filesize};" \
- "cp.b 200000 FFF00000 ${filesize}\0" \
- "serverip=192.168.1.1\0" \
- "ipaddr=192.168.133.144\0" \
- "netmask=255.255.0.0\0" \
+ "bootfile=/tftpboot/" CFG__BOARDNAME "/uImage\0" \
+ "load=tftp 200000 /tftpboot/" CFG__BOARDNAME "/u-boot.bin\0" \
+ "text_base=" MK_STR(TEXT_BASE) "\0" \
+ "update=protect off ${text_base} +${filesize};" \
+ "era ${text_base} +${filesize};" \
+ "cp.b 200000 ${text_base} ${filesize}\0" \
"unlock=yes\0" \
- "ethaddr=00:02:44:7D:73:3B\0" \
""
+#undef MK_STR
+#undef XMK_STR
#define CONFIG_BOOTCOMMAND "run flash_self"
@@ -139,7 +167,7 @@
/*
* IPB Bus clocking configuration.
*/
-#define CFG_IPBSPEED_133 /* define for 133MHz speed */
+#define CFG_IPBSPEED_133 /* define for 133MHz speed */
/*
* I2C configuration
@@ -155,9 +183,9 @@
* TEXT base always at 0xFFF00000
* ENV_ADDR always at 0xFFF40000
* FLASH_BASE at 0xFC000000 for 64 MB (only 32MB are supported, not enough addr lines!!!)
- * 0xFE000000 for 32 MB
- * 0xFF000000 for 16 MB
- * 0xFF800000 for 8 MB
+ * 0xFE000000 for 32 MB
+ * 0xFF000000 for 16 MB
+ * 0xFF800000 for 8 MB
*/
#define CFG_FLASH_BASE 0xfc000000
#define CFG_FLASH_SIZE 0x04000000
@@ -179,9 +207,9 @@
#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
#define CFG_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */
-#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
+#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
-#define CFG_ENV_SECT_SIZE 0x40000 /* size of one complete sector */
+#define CFG_ENV_SECT_SIZE 0x40000 /* size of one complete sector */
#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */
@@ -211,7 +239,7 @@
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
-#define CFG_MONITOR_BASE TEXT_BASE
+#define CFG_MONITOR_BASE TEXT_BASE
#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
# define CFG_RAMBOOT 1
#endif
@@ -231,27 +259,45 @@
#define CONFIG_PHY_ADDR 1
/*
+ * LCD Splash Screen
+ */
+#if !defined(CONFIG_PRS200)
+#define CONFIG_LCD 1
+#endif
+
+#if defined(CONFIG_LCD)
+#define CONFIG_SPLASH_SCREEN 1
+#define CFG_CONSOLE_IS_IN_ENV 1
+#define LCD_BPP LCD_MONOCHROME
+#endif
+
+/*
* GPIO configuration
*/
/* 0x10000004 = 32MB SDRAM */
/* 0x90000004 = 64MB SDRAM */
+#if defined(CONFIG_LCD)
+/* set PSC2 in UART mode */
+#define CFG_GPS_PORT_CONFIG 0x00000044
+#else
#define CFG_GPS_PORT_CONFIG 0x00000004
+#endif
/*
* Miscellaneous configurable options
*/
-#define CFG_LONGHELP /* undef to save memory */
-#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
-#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
#endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
#define CFG_MAXARGS 16 /* max number of command args */
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
-#define CFG_MEMTEST_START 0x00100000 /* memtest works on */
+#define CFG_MEMTEST_START 0x00100000 /* memtest works on */
#define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
#define CFG_LOAD_ADDR 0x100000 /* default load address */
@@ -314,7 +360,7 @@
* One of four SC16C554 UARTs is selected with
* A3-A4 (DA5-DA6) lines.
*/
-#if (CONFIG_QUART_CONSOLE > 0) && (CONFIG_QUART_CONSOLE < 5)
+#if (CONFIG_QUART_CONSOLE > 0) && (CONFIG_QUART_CONSOLE < 5) && !defined(CONFIG_PRS200)
#define CFG_NS16550_COM1 (CFG_CS2_START | (CONFIG_QUART_CONSOLE - 1)<<5)
#elif (CONFIG_QUART_CONSOLE > 4) && (CONFIG_QUART_CONSOLE < 9)
#define CFG_NS16550_COM1 (CFG_CS1_START | (CONFIG_QUART_CONSOLE - 5)<<5)
diff --git a/include/configs/pcs440ep.h b/include/configs/pcs440ep.h
index 50c1c4f..23bdfc8 100644
--- a/include/configs/pcs440ep.h
+++ b/include/configs/pcs440ep.h
@@ -63,6 +63,7 @@
/*-----------------------------------------------------------------------
* Initial RAM & stack pointer (placed in SDRAM)
*----------------------------------------------------------------------*/
+#define CFG_INIT_RAM_DCACHE 1 /* d-cache as init ram */
#define CFG_INIT_RAM_ADDR 0x70000000 /* DCache */
#define CFG_INIT_RAM_END (8 << 10)
#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data*/
diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h
new file mode 100644
index 0000000..f67fd91
--- /dev/null
+++ b/include/configs/sequoia.h
@@ -0,0 +1,429 @@
+/*
+ * (C) Copyright 2006
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * (C) Copyright 2006
+ * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com
+ * Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/************************************************************************
+ * sequoia.h - configuration for Sequoia board (PowerPC440EPx)
+ ***********************************************************************/
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*-----------------------------------------------------------------------
+ * High Level Configuration Options
+ *----------------------------------------------------------------------*/
+/* This config file is used for Sequoia (440EPx) and Rainier (440GRx) */
+#ifndef CONFIG_RAINIER
+#define CONFIG_SEQUOIA 1 /* Board is Sequoia */
+#define CONFIG_440EPX 1 /* Specific PPC440EPx */
+#else
+#define CONFIG_440GRX 1 /* Specific PPC440GRx */
+#endif
+#define CONFIG_4xx 1 /* ... PPC4xx family */
+#define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */
+
+#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
+#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */
+
+/*-----------------------------------------------------------------------
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ *----------------------------------------------------------------------*/
+#define CFG_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Monitor */
+#define CFG_MALLOC_LEN (256 * 1024) /* Reserve 256 kB for malloc() */
+
+#define CFG_BOOT_BASE_ADDR 0xf0000000
+#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */
+#define CFG_FLASH_BASE 0xfe000000 /* start of FLASH */
+#define CFG_MONITOR_BASE TEXT_BASE
+#define CFG_NAND_ADDR 0xd0000000 /* NAND Flash */
+#define CFG_OCM_BASE 0xe0010000 /* ocm */
+#define CFG_PCI_BASE 0xe0000000 /* Internal PCI regs */
+#define CFG_PCI_MEMBASE 0x80000000 /* mapped pci memory */
+#define CFG_PCI_MEMBASE1 CFG_PCI_MEMBASE + 0x10000000
+#define CFG_PCI_MEMBASE2 CFG_PCI_MEMBASE1 + 0x10000000
+#define CFG_PCI_MEMBASE3 CFG_PCI_MEMBASE2 + 0x10000000
+
+/* Don't change either of these */
+#define CFG_PERIPHERAL_BASE 0xef600000 /* internal peripherals */
+
+#define CFG_USB2D0_BASE 0xe0000100
+#define CFG_USB_DEVICE 0xe0000000
+#define CFG_USB_HOST 0xe0000400
+#define CFG_BCSR_BASE 0xc0000000
+
+/*-----------------------------------------------------------------------
+ * Initial RAM & stack pointer
+ *----------------------------------------------------------------------*/
+/* 440EPx/440GRx have 16KB of internal SRAM, so no need for D-Cache */
+#define CFG_INIT_RAM_OCM 1 /* OCM as init ram */
+#define CFG_INIT_RAM_ADDR CFG_OCM_BASE /* OCM */
+
+#define CFG_INIT_RAM_END (4 << 10)
+#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+/*-----------------------------------------------------------------------
+ * Serial Port
+ *----------------------------------------------------------------------*/
+#define CFG_EXT_SERIAL_CLOCK 11059200 /* ext. 11.059MHz clk */
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SERIAL_MULTI 1
+/* define this if you want console on UART1 */
+#undef CONFIG_UART1_CONSOLE
+
+#define CFG_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
+
+/*-----------------------------------------------------------------------
+ * Environment
+ *----------------------------------------------------------------------*/
+#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
+#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
+#else
+#define CFG_ENV_IS_IN_NAND 1 /* use NAND for environment vars */
+#endif
+
+/*-----------------------------------------------------------------------
+ * FLASH related
+ *----------------------------------------------------------------------*/
+#define CFG_FLASH_CFI /* The flash is CFI compatible */
+#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */
+
+#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }
+
+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 512 /* max number of sectors on one chip */
+
+#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+
+#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
+#define CFG_FLASH_PROTECTION 1 /* use hardware flash protection */
+
+#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
+#define CFG_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */
+
+#ifdef CFG_ENV_IS_IN_FLASH
+#define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */
+#define CFG_ENV_ADDR ((-CFG_MONITOR_LEN)-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */
+
+/* Address and size of Redundant Environment Sector */
+#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
+#endif
+
+/*-----------------------------------------------------------------------
+ * NAND FLASH
+ *----------------------------------------------------------------------*/
+#define CFG_MAX_NAND_DEVICE 1
+#define NAND_MAX_CHIPS 1
+#define CFG_NAND_BASE CFG_NAND_ADDR
+
+/*
+ * IPL (Initial Program Loader, integrated inside CPU)
+ * Will load first 4k from NAND (SPL) into cache and execute it from there.
+ *
+ * SPL (Secondary Program Loader)
+ * Will load special U-Boot version (NUB) from NAND and execute it. This SPL
+ * has to fit into 4kByte. It sets up the CPU and configures the SDRAM
+ * controller and the NAND controller so that the special U-Boot image can be
+ * loaded from NAND to SDRAM.
+ *
+ * NUB (NAND U-Boot)
+ * This NAND U-Boot (NUB) is a special U-Boot version which can be started
+ * from RAM. Therefore it mustn't (re-)configure the SDRAM controller.
+ *
+ * On 440EPx the SPL is copied to SDRAM before the NAND controller is
+ * set up. While still running from cache, I experienced problems accessing
+ * the NAND controller. sr - 2006-08-25
+ */
+#define CFG_NAND_BOOT_SPL_SRC 0xfffff000 /* SPL location */
+#define CFG_NAND_BOOT_SPL_SIZE (4 << 10) /* SPL size */
+#define CFG_NAND_BOOT_SPL_DST (CFG_OCM_BASE + (12 << 10)) /* Copy SPL here */
+#define CFG_NAND_U_BOOT_DST 0x01000000 /* Load NUB to this addr */
+#define CFG_NAND_U_BOOT_START CFG_NAND_U_BOOT_DST /* Start NUB from this addr */
+#define CFG_NAND_BOOT_SPL_DELTA (CFG_NAND_BOOT_SPL_SRC - CFG_NAND_BOOT_SPL_DST)
+
+/*
+ * Define the partitioning of the NAND chip (only RAM U-Boot is needed here)
+ */
+#define CFG_NAND_U_BOOT_OFFS (16 << 10) /* Offset to RAM U-Boot image */
+#define CFG_NAND_U_BOOT_SIZE (384 << 10) /* Size of RAM U-Boot image */
+
+/*
+ * Now the NAND chip has to be defined (no autodetection used!)
+ */
+#define CFG_NAND_PAGE_SIZE (512) /* NAND chip page size */
+#define CFG_NAND_BLOCK_SIZE (16 << 10) /* NAND chip block size */
+#define CFG_NAND_PAGE_COUNT (32) /* NAND chip page count */
+#define CFG_NAND_BAD_BLOCK_POS (5) /* Location of bad block marker */
+#undef CFG_NAND_4_ADDR_CYCLE /* No fourth addr used (<=32MB) */
+
+#ifdef CFG_ENV_IS_IN_NAND
+/*
+ * For NAND booting the environment is embedded in the U-Boot image. Please take
+ * look at the file board/amcc/sequoia/u-boot-nand.lds for details.
+ */
+#define CFG_ENV_SIZE CFG_NAND_BLOCK_SIZE
+#define CFG_ENV_OFFSET (CFG_NAND_U_BOOT_OFFS + CFG_ENV_SIZE)
+#define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET + CFG_ENV_SIZE)
+#endif
+
+/*-----------------------------------------------------------------------
+ * DDR SDRAM
+ *----------------------------------------------------------------------*/
+#define CFG_MBYTES_SDRAM (256) /* 256MB */
+
+/*-----------------------------------------------------------------------
+ * I2C
+ *----------------------------------------------------------------------*/
+#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
+#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CFG_I2C_SLAVE 0x7F
+
+#define CFG_I2C_MULTI_EEPROMS
+#define CFG_I2C_EEPROM_ADDR (0xa8>>1)
+#define CFG_I2C_EEPROM_ADDR_LEN 1
+#define CFG_EEPROM_PAGE_WRITE_ENABLE
+#define CFG_EEPROM_PAGE_WRITE_BITS 3
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
+
+/* I2C SYSMON (LM75, AD7414 is almost compatible) */
+#define CONFIG_DTT_LM75 1 /* ON Semi's LM75 */
+#define CONFIG_DTT_AD7414 1 /* use AD7414 */
+#define CONFIG_DTT_SENSORS {0} /* Sensor addresses */
+#define CFG_DTT_MAX_TEMP 70
+#define CFG_DTT_LOW_TEMP -30
+#define CFG_DTT_HYSTERESIS 3
+
+#define CONFIG_PREBOOT "echo;" \
+ "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+ "echo"
+
+#undef CONFIG_BOOTARGS
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "hostname=sequoia\0" \
+ "nfsargs=setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=${serverip}:${rootpath}\0" \
+ "ramargs=setenv bootargs root=/dev/ram rw\0" \
+ "addip=setenv bootargs ${bootargs} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
+ ":${hostname}:${netdev}:off panic=1\0" \
+ "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
+ "flash_nfs=run nfsargs addip addtty;" \
+ "bootm ${kernel_addr}\0" \
+ "flash_self=run ramargs addip addtty;" \
+ "bootm ${kernel_addr} ${ramdisk_addr}\0" \
+ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \
+ "bootm\0" \
+ "rootpath=/opt/eldk/ppc_4xx\0" \
+ "bootfile=/tftpboot/sequoia/uImage\0" \
+ "kernel_addr=FE000000\0" \
+ "ramdisk_addr=FE180000\0" \
+ "load=tftp 100000 /tftpboot/sequoia/u-boot.bin\0" \
+ "update=protect off FFFA0000 FFFFFFFF;era FFFA0000 FFFFFFFF;" \
+ "cp.b 100000 FFFA0000 60000\0" \
+ "upd=run load;run update\0" \
+ ""
+#define CONFIG_BOOTCOMMAND "run flash_self"
+
+#if 0
+#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
+#else
+#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
+#endif
+
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+#define CONFIG_M88E1111_PHY 1
+#define CONFIG_IBM_EMAC4_V4 1
+#define CONFIG_MII 1 /* MII PHY management */
+#define CONFIG_PHY_ADDR 0 /* PHY address, See schematics */
+
+#define CONFIG_PHY_RESET 1 /* reset phy upon startup */
+#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
+
+#define CONFIG_HAS_ETH0
+#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */
+
+#define CONFIG_NET_MULTI 1
+#define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */
+#define CONFIG_PHY1_ADDR 1
+
+/* USB */
+#ifdef CONFIG_440EPX
+#define CONFIG_USB_OHCI
+#define CONFIG_USB_STORAGE
+
+/* Comment this out to enable USB 1.1 device */
+#define USB_2_0_DEVICE
+
+#define CMD_USB CFG_CMD_USB
+#else
+#define CMD_USB 0 /* no USB on 440GRx */
+#endif /* CONFIG_440EPX */
+
+/* Partitions */
+#define CONFIG_MAC_PARTITION
+#define CONFIG_DOS_PARTITION
+#define CONFIG_ISO_PARTITION
+
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
+ CFG_CMD_ASKENV | \
+ CFG_CMD_DHCP | \
+ CFG_CMD_DTT | \
+ CFG_CMD_DIAG | \
+ CFG_CMD_EEPROM | \
+ CFG_CMD_ELF | \
+ CFG_CMD_FAT | \
+ CFG_CMD_I2C | \
+ CFG_CMD_IRQ | \
+ CFG_CMD_MII | \
+ CFG_CMD_NAND | \
+ CFG_CMD_NET | \
+ CFG_CMD_NFS | \
+ CFG_CMD_PCI | \
+ CFG_CMD_PING | \
+ CFG_CMD_REGINFO | \
+ CFG_CMD_SDRAM | \
+ CMD_USB)
+
+#define CONFIG_SUPPORT_VFAT
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+/*-----------------------------------------------------------------------
+ * Miscellaneous configurable options
+ *----------------------------------------------------------------------*/
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
+#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
+
+#define CFG_LOAD_ADDR 0x100000 /* default load address */
+#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
+
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
+#define CONFIG_LOOPW 1 /* enable loopw command */
+#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */
+#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
+#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
+
+/*-----------------------------------------------------------------------
+ * PCI stuff
+ *----------------------------------------------------------------------*/
+/* General PCI */
+#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_PNP /* do (not) pci plug-and-play */
+#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
+#define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE*/
+
+/* Board-specific PCI */
+#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */
+#define CFG_PCI_TARGET_INIT
+#define CFG_PCI_MASTER_INIT
+
+#define CFG_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */
+#define CFG_PCI_SUBSYS_ID 0xcafe /* Whatever */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
+/*-----------------------------------------------------------------------
+ * External Bus Controller (EBC) Setup
+ *----------------------------------------------------------------------*/
+#define CFG_FLASH CFG_FLASH_BASE
+#define CFG_NAND 0xD0000000
+#define CFG_CPLD 0xC0000000
+
+/*
+ * On Sequoia CS0 and CS3 are switched when configuring for NAND booting
+ */
+#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
+#define CFG_NAND_CS 3 /* NAND chip connected to CSx */
+/* Memory Bank 0 (NOR-FLASH) initialization */
+#define CFG_EBC_PB0AP 0x03017300
+#define CFG_EBC_PB0CR (CFG_FLASH | 0xba000)
+
+/* Memory Bank 3 (NAND-FLASH) initialization */
+#define CFG_EBC_PB3AP 0x018003c0
+#define CFG_EBC_PB3CR (CFG_NAND | 0x1c000)
+#else
+#define CFG_NAND_CS 0 /* NAND chip connected to CSx */
+/* Memory Bank 3 (NOR-FLASH) initialization */
+#define CFG_EBC_PB3AP 0x03017300
+#define CFG_EBC_PB3CR (CFG_FLASH | 0xba000)
+
+/* Memory Bank 0 (NAND-FLASH) initialization */
+#define CFG_EBC_PB0AP 0x018003c0
+#define CFG_EBC_PB0CR (CFG_NAND | 0x1c000)
+#endif
+
+/* Memory Bank 2 (CPLD) initialization */
+#define CFG_EBC_PB2AP 0x24814580
+#define CFG_EBC_PB2CR (CFG_CPLD | 0x38000)
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ *----------------------------------------------------------------------*/
+#define CFG_DCACHE_SIZE (32<<10) /* For AMCC 440 CPUs */
+#define CFG_CACHELINE_SIZE 32 /* ... */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
+#endif
+#endif /* __CONFIG_H */
diff --git a/include/configs/sorcery.h b/include/configs/sorcery.h
index 3d907f8..4937638 100644
--- a/include/configs/sorcery.h
+++ b/include/configs/sorcery.h
@@ -261,6 +261,7 @@
#define CONFIG_MPC8220_FEC 1
#define CONFIG_FEC_10MBIT 1 /* Workaround for FEC 100Mbit problem */
#define CONFIG_PHY_ADDR 0x1F
+#define CONFIG_MII 1
/*
* Miscellaneous configurable options
diff --git a/include/configs/yellowstone.h b/include/configs/yellowstone.h
index cf42b66..ba27f37 100644
--- a/include/configs/yellowstone.h
+++ b/include/configs/yellowstone.h
@@ -65,6 +65,7 @@
/*-----------------------------------------------------------------------
* Initial RAM & stack pointer (placed in SDRAM)
*----------------------------------------------------------------------*/
+#define CFG_INIT_RAM_DCACHE 1 /* d-cache as init ram */
#define CFG_INIT_RAM_ADDR 0x70000000 /* DCache */
#define CFG_INIT_RAM_END (8 << 10)
#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data*/
@@ -109,6 +110,8 @@
#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
+
#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
#ifdef CFG_ENV_IS_IN_FLASH
diff --git a/include/configs/yosemite.h b/include/configs/yosemite.h
index 86a85b8..3d7b4a2 100644
--- a/include/configs/yosemite.h
+++ b/include/configs/yosemite.h
@@ -65,6 +65,7 @@
/*-----------------------------------------------------------------------
* Initial RAM & stack pointer (placed in SDRAM)
*----------------------------------------------------------------------*/
+#define CFG_INIT_RAM_DCACHE 1 /* d-cache as init ram */
#define CFG_INIT_RAM_ADDR 0x70000000 /* DCache */
#define CFG_INIT_RAM_END (8 << 10)
#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data*/
diff --git a/include/environment.h b/include/environment.h
index 422f800..26b0712 100644
--- a/include/environment.h
+++ b/include/environment.h
@@ -79,6 +79,10 @@
# ifdef CFG_ENV_OFFSET_REDUND
# define CFG_REDUNDAND_ENVIRONMENT
# endif
+# if defined(CONFIG_NAND_U_BOOT)
+/* Use embedded environment in NAND boot versions */
+# define ENV_IS_EMBEDDED 1
+# endif
#endif /* CFG_ENV_IS_IN_NAND */
diff --git a/include/exports.h b/include/exports.h
index 0eaf66e..8f7f617 100644
--- a/include/exports.h
+++ b/include/exports.h
@@ -20,6 +20,9 @@
unsigned long get_timer(unsigned long);
void vprintf(const char *, va_list);
void do_reset (void);
+unsigned long simple_strtoul(const char *cp,char **endp,unsigned int base);
+char *getenv (char *name);
+void setenv (char *varname, char *varvalue);
#if (CONFIG_COMMANDS & CFG_CMD_I2C)
int i2c_write (uchar, uint, int , uchar* , int);
int i2c_read (uchar, uint, int , uchar* , int);
@@ -37,7 +40,7 @@
XF_MAX
};
-#define XF_VERSION 2
+#define XF_VERSION 3
#if defined(CONFIG_I386)
extern gd_t *global_data;
diff --git a/include/flash.h b/include/flash.h
index 84b48a9..d91589a 100644
--- a/include/flash.h
+++ b/include/flash.h
@@ -209,6 +209,9 @@
#define AMD_ID_GL064M_3 0x22012201 /* 3rd ID word for S29GL064M-R6 */
#define AMD_ID_GL064MT_2 0x22102210 /* 2nd ID word for S29GL064M-R3 (top boot sector) */
#define AMD_ID_GL064MT_3 0x22012201 /* 3rd ID word for S29GL064M-R3 (top boot sector) */
+#define AMD_ID_GL128N_2 0x22212221 /* 2nd ID word for S29GL128N */
+#define AMD_ID_GL128N_3 0x22012201 /* 3rd ID word for S29GL128N */
+
#define AMD_ID_LV320B_2 0x221A221A /* 2d ID word for AM29LV320MB at 0x38 */
#define AMD_ID_LV320B_3 0x22002200 /* 3d ID word for AM29LV320MB at 0x3c */
@@ -417,6 +420,7 @@
#define FLASH_FUJLV650 0x00D0 /* Fujitsu MBM 29LV650UE/651UE */
#define FLASH_MT28S4M16LC 0x00E1 /* Micron MT28S4M16LC */
#define FLASH_S29GL064M 0x00F0 /* Spansion S29GL064M-R6 */
+#define FLASH_S29GL128N 0x00F1 /* Spansion S29GL128N */
#define FLASH_UNKNOWN 0xFFFF /* unknown flash type */
diff --git a/include/image.h b/include/image.h
index ea7e953..2f575fd 100644
--- a/include/image.h
+++ b/include/image.h
@@ -76,6 +76,7 @@
#define IH_CPU_MICROBLAZE 14 /* MicroBlaze */
#define IH_CPU_NIOS2 15 /* Nios-II */
#define IH_CPU_BLACKFIN 16 /* Blackfin */
+#define IH_CPU_AVR32 17 /* AVR32 */
/*
* Image Types
diff --git a/include/lcd.h b/include/lcd.h
index 7e23736..b688583 100644
--- a/include/lcd.h
+++ b/include/lcd.h
@@ -148,7 +148,14 @@
extern vidinfo_t panel_info;
-#endif /* CONFIG_MPC823 or CONFIG_PXA250 */
+#elif defined(CONFIG_MCC200)
+typedef struct vidinfo {
+ ushort vl_col; /* Number of columns (i.e. 160) */
+ ushort vl_row; /* Number of rows (i.e. 100) */
+
+ u_char vl_bpix; /* Bits per pixel, 0 = 1 */
+} vidinfo_t;
+#endif /* CONFIG_MPC823, CONFIG_PXA250 or CONFIG_MCC200 */
/* Video functions */
diff --git a/include/linux/mtd/compat.h b/include/linux/mtd/compat.h
index 460cd45..fe55087 100644
--- a/include/linux/mtd/compat.h
+++ b/include/linux/mtd/compat.h
@@ -31,11 +31,13 @@
#define max_t(type,x,y) \
({ type __x = (x); type __y = (y); __x > __y ? __x: __y; })
+#ifndef BUG
#define BUG() do { \
printf("U-Boot BUG at %s:%d!\n", __FILE__, __LINE__); \
} while (0)
#define BUG_ON(condition) do { if (condition) BUG(); } while(0)
+#endif /* BUG */
#define likely(x) __builtin_expect(!!(x), 1)
#define unlikely(x) __builtin_expect(!!(x), 0)
diff --git a/include/linux/mtd/ndfc.h b/include/linux/mtd/ndfc.h
new file mode 100644
index 0000000..d0558a9
--- /dev/null
+++ b/include/linux/mtd/ndfc.h
@@ -0,0 +1,67 @@
+/*
+ * linux/include/linux/mtd/ndfc.h
+ *
+ * Copyright (c) 2006 Thomas Gleixner <tglx@linutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Info:
+ * Contains defines, datastructures for ndfc nand controller
+ *
+ */
+#ifndef __LINUX_MTD_NDFC_H
+#define __LINUX_MTD_NDFC_H
+
+/* NDFC Register definitions */
+#define NDFC_CMD 0x00
+#define NDFC_ALE 0x04
+#define NDFC_DATA 0x08
+#define NDFC_ECC 0x10
+#define NDFC_BCFG0 0x30
+#define NDFC_BCFG1 0x34
+#define NDFC_BCFG2 0x38
+#define NDFC_BCFG3 0x3c
+#define NDFC_CCR 0x40
+#define NDFC_STAT 0x44
+#define NDFC_HWCTL 0x48
+#define NDFC_REVID 0x50
+
+#define NDFC_STAT_IS_READY 0x01000000
+
+#define NDFC_CCR_RESET_CE 0x80000000 /* CE Reset */
+#define NDFC_CCR_RESET_ECC 0x40000000 /* ECC Reset */
+#define NDFC_CCR_RIE 0x20000000 /* Interrupt Enable on Device Rdy */
+#define NDFC_CCR_REN 0x10000000 /* Enable wait for Rdy in LinearR */
+#define NDFC_CCR_ROMEN 0x08000000 /* Enable ROM In LinearR */
+#define NDFC_CCR_ARE 0x04000000 /* Auto-Read Enable */
+#define NDFC_CCR_BS(x) (((x) & 0x3) << 24) /* Select Bank on CE[x] */
+#define NDFC_CCR_BS_MASK 0x03000000 /* Select Bank */
+#define NDFC_CCR_ARAC0 0x00000000 /* 3 Addr, 1 Col 2 Row 512b page */
+#define NDFC_CCR_ARAC1 0x00001000 /* 4 Addr, 1 Col 3 Row 512b page */
+#define NDFC_CCR_ARAC2 0x00002000 /* 4 Addr, 2 Col 2 Row 2K page */
+#define NDFC_CCR_ARAC3 0x00003000 /* 5 Addr, 2 Col 3 Row 2K page */
+#define NDFC_CCR_ARAC_MASK 0x00003000 /* Auto-Read mode Addr Cycles */
+#define NDFC_CCR_RPG 0x0000C000 /* Auto-Read Page */
+#define NDFC_CCR_EBCC 0x00000004 /* EBC Configuration Completed */
+#define NDFC_CCR_DHC 0x00000002 /* Direct Hardware Control Enable */
+
+#define NDFC_BxCFG_EN 0x80000000 /* Bank Enable */
+#define NDFC_BxCFG_CED 0x40000000 /* nCE Style */
+#define NDFC_BxCFG_SZ_MASK 0x08000000 /* Bank Size */
+#define NDFC_BxCFG_SZ_8BIT 0x00000000 /* 8bit */
+#define NDFC_BxCFG_SZ_16BIT 0x08000000 /* 16bit */
+
+#define NDFC_MAX_BANKS 4
+
+struct ndfc_controller_settings {
+ uint32_t ccr_settings;
+ uint64_t ndfc_erpn;
+};
+
+struct ndfc_chip_settings {
+ uint32_t bank_settings;
+};
+
+#endif
diff --git a/include/mpc5xxx.h b/include/mpc5xxx.h
index daa4d5f..1d20d1d 100644
--- a/include/mpc5xxx.h
+++ b/include/mpc5xxx.h
@@ -232,6 +232,65 @@
#define MPC5XXX_ICTL_PER_STS (MPC5XXX_ICTL + 0x0030)
#define MPC5XXX_ICTL_BUS_STS (MPC5XXX_ICTL + 0x0038)
+#define NR_IRQS 64
+
+/* IRQ mapping - these are our logical IRQ numbers */
+#define MPC5XXX_CRIT_IRQ_NUM 4
+#define MPC5XXX_MAIN_IRQ_NUM 17
+#define MPC5XXX_SDMA_IRQ_NUM 17
+#define MPC5XXX_PERP_IRQ_NUM 23
+
+#define MPC5XXX_CRIT_IRQ_BASE 1
+#define MPC5XXX_MAIN_IRQ_BASE (MPC5XXX_CRIT_IRQ_BASE + MPC5XXX_CRIT_IRQ_NUM)
+#define MPC5XXX_SDMA_IRQ_BASE (MPC5XXX_MAIN_IRQ_BASE + MPC5XXX_MAIN_IRQ_NUM)
+#define MPC5XXX_PERP_IRQ_BASE (MPC5XXX_SDMA_IRQ_BASE + MPC5XXX_SDMA_IRQ_NUM)
+
+#define MPC5XXX_IRQ0 (MPC5XXX_CRIT_IRQ_BASE + 0)
+#define MPC5XXX_SLICE_TIMER_0_IRQ (MPC5XXX_CRIT_IRQ_BASE + 1)
+#define MPC5XXX_HI_INT_IRQ (MPC5XXX_CRIT_IRQ_BASE + 2)
+#define MPC5XXX_CCS_IRQ (MPC5XXX_CRIT_IRQ_BASE + 3)
+
+#define MPC5XXX_IRQ1 (MPC5XXX_MAIN_IRQ_BASE + 1)
+#define MPC5XXX_IRQ2 (MPC5XXX_MAIN_IRQ_BASE + 2)
+#define MPC5XXX_IRQ3 (MPC5XXX_MAIN_IRQ_BASE + 3)
+#define MPC5XXX_RTC_PINT_IRQ (MPC5XXX_MAIN_IRQ_BASE + 5)
+#define MPC5XXX_RTC_SINT_IRQ (MPC5XXX_MAIN_IRQ_BASE + 6)
+#define MPC5XXX_RTC_GPIO_STD_IRQ (MPC5XXX_MAIN_IRQ_BASE + 7)
+#define MPC5XXX_RTC_GPIO_WKUP_IRQ (MPC5XXX_MAIN_IRQ_BASE + 8)
+#define MPC5XXX_TMR0_IRQ (MPC5XXX_MAIN_IRQ_BASE + 9)
+#define MPC5XXX_TMR1_IRQ (MPC5XXX_MAIN_IRQ_BASE + 10)
+#define MPC5XXX_TMR2_IRQ (MPC5XXX_MAIN_IRQ_BASE + 11)
+#define MPC5XXX_TMR3_IRQ (MPC5XXX_MAIN_IRQ_BASE + 12)
+#define MPC5XXX_TMR4_IRQ (MPC5XXX_MAIN_IRQ_BASE + 13)
+#define MPC5XXX_TMR5_IRQ (MPC5XXX_MAIN_IRQ_BASE + 14)
+#define MPC5XXX_TMR6_IRQ (MPC5XXX_MAIN_IRQ_BASE + 15)
+#define MPC5XXX_TMR7_IRQ (MPC5XXX_MAIN_IRQ_BASE + 16)
+
+#define MPC5XXX_SDMA_IRQ (MPC5XXX_PERP_IRQ_BASE + 0)
+#define MPC5XXX_PSC1_IRQ (MPC5XXX_PERP_IRQ_BASE + 1)
+#define MPC5XXX_PSC2_IRQ (MPC5XXX_PERP_IRQ_BASE + 2)
+#define MPC5XXX_PSC3_IRQ (MPC5XXX_PERP_IRQ_BASE + 3)
+#define MPC5XXX_PSC6_IRQ (MPC5XXX_PERP_IRQ_BASE + 4)
+#define MPC5XXX_IRDA_IRQ (MPC5XXX_PERP_IRQ_BASE + 4)
+#define MPC5XXX_FEC_IRQ (MPC5XXX_PERP_IRQ_BASE + 5)
+#define MPC5XXX_USB_IRQ (MPC5XXX_PERP_IRQ_BASE + 6)
+#define MPC5XXX_ATA_IRQ (MPC5XXX_PERP_IRQ_BASE + 7)
+#define MPC5XXX_PCI_CNTRL_IRQ (MPC5XXX_PERP_IRQ_BASE + 8)
+#define MPC5XXX_PCI_SCIRX_IRQ (MPC5XXX_PERP_IRQ_BASE + 9)
+#define MPC5XXX_PCI_SCITX_IRQ (MPC5XXX_PERP_IRQ_BASE + 10)
+#define MPC5XXX_PSC4_IRQ (MPC5XXX_PERP_IRQ_BASE + 11)
+#define MPC5XXX_PSC5_IRQ (MPC5XXX_PERP_IRQ_BASE + 12)
+#define MPC5XXX_SPI_MODF_IRQ (MPC5XXX_PERP_IRQ_BASE + 13)
+#define MPC5XXX_SPI_SPIF_IRQ (MPC5XXX_PERP_IRQ_BASE + 14)
+#define MPC5XXX_I2C1_IRQ (MPC5XXX_PERP_IRQ_BASE + 15)
+#define MPC5XXX_I2C2_IRQ (MPC5XXX_PERP_IRQ_BASE + 16)
+#define MPC5XXX_MSCAN1_IRQ (MPC5XXX_PERP_IRQ_BASE + 17)
+#define MPC5XXX_MSCAN2_IRQ (MPC5XXX_PERP_IRQ_BASE + 18)
+#define MPC5XXX_IR_RX_IRQ (MPC5XXX_PERP_IRQ_BASE + 19)
+#define MPC5XXX_IR_TX_IRQ (MPC5XXX_PERP_IRQ_BASE + 20)
+#define MPC5XXX_XLB_ARB_IRQ (MPC5XXX_PERP_IRQ_BASE + 21)
+#define MPC5XXX_BDLC_IRQ (MPC5XXX_PERP_IRQ_BASE + 22)
+
/* General Purpose Timers registers */
#define MPC5XXX_GPT0_ENABLE (MPC5XXX_GPT + 0x0)
#define MPC5XXX_GPT0_COUNTER (MPC5XXX_GPT + 0x4)
diff --git a/include/nand.h b/include/nand.h
index 905115b..5c7311f 100644
--- a/include/nand.h
+++ b/include/nand.h
@@ -60,4 +60,61 @@
return info->erase(info, &instr);
}
+
+/*****************************************************************************
+ * declarations from nand_util.c
+ ****************************************************************************/
+
+struct nand_write_options {
+ u_char *buffer; /* memory block containing image to write */
+ ulong length; /* number of bytes to write */
+ ulong offset; /* start address in NAND */
+ int quiet; /* don't display progress messages */
+ int autoplace; /* if true use auto oob layout */
+ int forcejffs2; /* force jffs2 oob layout */
+ int forceyaffs; /* force yaffs oob layout */
+ int noecc; /* write without ecc */
+ int writeoob; /* image contains oob data */
+ int pad; /* pad to page size */
+ int blockalign; /* 1|2|4 set multiple of eraseblocks
+ * to align to */
+};
+
+typedef struct nand_write_options nand_write_options_t;
+
+struct nand_read_options {
+ u_char *buffer; /* memory block in which read image is written*/
+ ulong length; /* number of bytes to read */
+ ulong offset; /* start address in NAND */
+ int quiet; /* don't display progress messages */
+ int readoob; /* put oob data in image */
+};
+
+typedef struct nand_read_options nand_read_options_t;
+
+struct nand_erase_options {
+ ulong length; /* number of bytes to erase */
+ ulong offset; /* first address in NAND to erase */
+ int quiet; /* don't display progress messages */
+ int jffs2; /* if true: format for jffs2 usage
+ * (write appropriate cleanmarker blocks) */
+ int scrub; /* if true, really clean NAND by erasing
+ * bad blocks (UNSAFE) */
+};
+
+typedef struct nand_erase_options nand_erase_options_t;
+
+int nand_write_opts(nand_info_t *meminfo, const nand_write_options_t *opts);
+
+int nand_read_opts(nand_info_t *meminfo, const nand_read_options_t *opts);
+int nand_erase_opts(nand_info_t *meminfo, const nand_erase_options_t *opts);
+
+#define NAND_LOCK_STATUS_TIGHT 0x01
+#define NAND_LOCK_STATUS_LOCK 0x02
+#define NAND_LOCK_STATUS_UNLOCK 0x04
+
+int nand_lock( nand_info_t *meminfo, int tight );
+int nand_unlock( nand_info_t *meminfo, ulong start, ulong length );
+int nand_get_lock_status(nand_info_t *meminfo, ulong offset);
+
#endif
diff --git a/include/ppc440.h b/include/ppc440.h
index d5a9f66..e407320 100644
--- a/include/ppc440.h
+++ b/include/ppc440.h
@@ -82,7 +82,10 @@
#define ivor13 0x19d /* interrupt vector offset register 13 */
#define ivor14 0x19e /* interrupt vector offset register 14 */
#define ivor15 0x19f /* interrupt vector offset register 15 */
-#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+#if defined(CONFIG_440GX) || \
+ defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_440SP) || defined(CONFIG_440SPE)
#define mcsrr0 0x23a /* machine check save/restore register 0 */
#define mcsrr1 0x23b /* mahcine check save/restore register 1 */
#define mcsr 0x23c /* machine check status register */
@@ -151,7 +154,18 @@
#define sdr_ecid1 0x0081
#define sdr_ecid2 0x0082
#define sdr_jtag 0x00c0
+#if !defined(CONFIG_440EPX) && !defined(CONFIG_440GRX)
#define sdr_ddrdl 0x00e0
+#else
+#define sdr_cfg 0x00e0
+#define SDR_CFG_LT2_MASK 0x01000000 /* Leakage test 2*/
+#define SDR_CFG_64_32BITS_MASK 0x01000000 /* Switch DDR 64 bits or 32 bits */
+#define SDR_CFG_32BITS 0x00000000 /* 32 bits */
+#define SDR_CFG_64BITS 0x01000000 /* 64 bits */
+#define SDR_CFG_MC_V2518_MASK 0x02000000 /* Low VDD2518 (2.5 or 1.8V) */
+#define SDR_CFG_MC_V25 0x00000000 /* 2.5 V */
+#define SDR_CFG_MC_V18 0x02000000 /* 1.8 V */
+#endif /* !defined(CONFIG_440EPX) && !defined(CONFIG_440GRX) */
#define sdr_ebc 0x0100
#define sdr_uart0 0x0120 /* UART0 Config */
#define sdr_uart1 0x0121 /* UART1 Config */
@@ -180,6 +194,54 @@
#define sdr_plbtr 0x4200
#define sdr_mfr 0x4300 /* SDR0_MFR reg */
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) /* test-only!!!! */
+#define DDR0_00 0x00
+#define DDR0_01 0x01
+#define DDR0_02 0x02
+#define DDR0_03 0x03
+#define DDR0_04 0x04
+#define DDR0_05 0x05
+#define DDR0_06 0x06
+#define DDR0_07 0x07
+#define DDR0_08 0x08
+#define DDR0_09 0x09
+#define DDR0_10 0x0A
+#define DDR0_11 0x0B
+#define DDR0_12 0x0C
+#define DDR0_13 0x0D
+#define DDR0_14 0x0E
+#define DDR0_15 0x0F
+#define DDR0_16 0x10
+#define DDR0_17 0x11
+#define DDR0_18 0x12
+#define DDR0_19 0x13
+#define DDR0_20 0x14
+#define DDR0_21 0x15
+#define DDR0_22 0x16
+#define DDR0_23 0x17
+#define DDR0_24 0x18
+#define DDR0_25 0x19
+#define DDR0_26 0x1A
+#define DDR0_27 0x1B
+#define DDR0_28 0x1C
+#define DDR0_29 0x1D
+#define DDR0_30 0x1E
+#define DDR0_31 0x1F
+#define DDR0_32 0x20
+#define DDR0_33 0x21
+#define DDR0_34 0x22
+#define DDR0_35 0x23
+#define DDR0_36 0x24
+#define DDR0_37 0x25
+#define DDR0_38 0x26
+#define DDR0_39 0x27
+#define DDR0_40 0x28
+#define DDR0_41 0x29
+#define DDR0_42 0x2A
+#define DDR0_43 0x2B
+#define DDR0_44 0x2C
+#endif /*CONFIG_440EPX*/
+
/*-----------------------------------------------------------------------------
| SDRAM Controller
+----------------------------------------------------------------------------*/
@@ -787,7 +849,8 @@
#define xbcfg 0x23 /* external bus configuration reg */
#define xbcid 0x24 /* external bus core id reg */
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
/* PLB4 to PLB3 Bridge OUT */
#define P4P3_DCR_BASE 0x020
@@ -877,6 +940,7 @@
#define plb1_bearl (PLB_ARBITER_BASE+ 0x0C)
#define plb1_bearh (PLB_ARBITER_BASE+ 0x0D)
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
/* Pin Function Control Register 1 */
#define SDR0_PFC1 0x4101
#define SDR0_PFC1_U1ME_MASK 0x02000000 /* UART1 Mode Enable */
@@ -918,6 +982,178 @@
#define SDR0_USB0_LEEN_DISABLE 0x00000000 /* Little Endian Disable */
#define SDR0_USB0_LEEN_ENABLE 0x00000001 /* Little Endian Enable */
+/* Miscealleneaous Function Reg. */
+#define SDR0_MFR 0x4300
+#define SDR0_MFR_ETH0_CLK_SEL_MASK 0x08000000 /* Ethernet0 Clock Select */
+#define SDR0_MFR_ETH0_CLK_SEL_EXT 0x00000000
+#define SDR0_MFR_ETH1_CLK_SEL_MASK 0x04000000 /* Ethernet1 Clock Select */
+#define SDR0_MFR_ETH1_CLK_SEL_EXT 0x00000000
+#define SDR0_MFR_ZMII_MODE_MASK 0x03000000 /* ZMII Mode Mask */
+#define SDR0_MFR_ZMII_MODE_MII 0x00000000 /* ZMII Mode MII */
+#define SDR0_MFR_ZMII_MODE_SMII 0x01000000 /* ZMII Mode SMII */
+#define SDR0_MFR_ZMII_MODE_RMII_10M 0x02000000 /* ZMII Mode RMII - 10 Mbs */
+#define SDR0_MFR_ZMII_MODE_RMII_100M 0x03000000 /* ZMII Mode RMII - 100 Mbs */
+#define SDR0_MFR_ZMII_MODE_BIT0 0x02000000 /* ZMII Mode Bit0 */
+#define SDR0_MFR_ZMII_MODE_BIT1 0x01000000 /* ZMII Mode Bit1 */
+#define SDR0_MFR_ZM_ENCODE(n) ((((unsigned long)(n))&0x3)<<24)
+#define SDR0_MFR_ZM_DECODE(n) ((((unsigned long)(n))<<24)&0x3)
+
+#define SDR0_MFR_ERRATA3_EN0 0x00800000
+#define SDR0_MFR_ERRATA3_EN1 0x00400000
+#define SDR0_MFR_PKT_REJ_MASK 0x00180000 /* Pkt Rej. Enable Mask */
+#define SDR0_MFR_PKT_REJ_EN 0x00180000 /* Pkt Rej. Enable on both EMAC3 0-1 */
+#define SDR0_MFR_PKT_REJ_EN0 0x00100000 /* Pkt Rej. Enable on EMAC3(0) */
+#define SDR0_MFR_PKT_REJ_EN1 0x00080000 /* Pkt Rej. Enable on EMAC3(1) */
+#define SDR0_MFR_PKT_REJ_POL 0x00200000 /* Packet Reject Polarity */
+
+#endif /* defined(CONFIG_440EP) || defined(CONFIG_440GR) */
+
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+#define SDR_USB2D0CR 0x0320
+#define SDR0_USB2D0CR_USB2DEV_EBC_SEL_MASK 0x00000004 /* USB 2.0 Device/EBC Master Selection */
+#define SDR0_USB2D0CR_USB2DEV_SELECTION 0x00000004 /* USB 2.0 Device Selection */
+#define SDR0_USB2D0CR_EBC_SELECTION 0x00000000 /* EBC Selection */
+
+#define SDR0_USB2D0CR_USB_DEV_INT_SEL_MASK 0x00000002 /* USB Device Interface Selection */
+#define SDR0_USB2D0CR_USB20D_DEVSEL 0x00000000 /* USB2.0 Device Selected */
+#define SDR0_USB2D0CR_USB11D_DEVSEL 0x00000002 /* USB1.1 Device Selected */
+
+#define SDR0_USB2D0CR_LEEN_MASK 0x00000001 /* Little Endian selection */
+#define SDR0_USB2D0CR_LEEN_DISABLE 0x00000000 /* Little Endian Disable */
+#define SDR0_USB2D0CR_LEEN_ENABLE 0x00000001 /* Little Endian Enable */
+
+/* USB2 Host Control Register */
+#define SDR0_USB2H0CR 0x0340
+#define SDR0_USB2H0CR_WDINT_MASK 0x00000001 /* Host UTMI Word Interface */
+#define SDR0_USB2H0CR_WDINT_8BIT_60MHZ 0x00000000 /* 8-bit/60MHz */
+#define SDR0_USB2H0CR_WDINT_16BIT_30MHZ 0x00000001 /* 16-bit/30MHz */
+#define SDR0_USB2H0CR_EFLADJ_MASK 0x0000007e /* EHCI Frame Length Adjustment */
+
+/* Pin Function Control Register 1 */
+#define SDR0_PFC1 0x4101
+#define SDR0_PFC1_U1ME_MASK 0x02000000 /* UART1 Mode Enable */
+#define SDR0_PFC1_U1ME_DSR_DTR 0x00000000 /* UART1 in DSR/DTR Mode */
+#define SDR0_PFC1_U1ME_CTS_RTS 0x02000000 /* UART1 in CTS/RTS Mode */
+
+#define SDR0_PFC1_SELECT_MASK 0x01C00000 /* Ethernet Pin Select EMAC 0 */
+#define SDR0_PFC1_SELECT_CONFIG_1_1 0x00C00000 /* 1xMII using RGMII bridge */
+#define SDR0_PFC1_SELECT_CONFIG_1_2 0x00000000 /* 1xMII using ZMII bridge */
+#define SDR0_PFC1_SELECT_CONFIG_2 0x00C00000 /* 1xGMII using RGMII bridge */
+#define SDR0_PFC1_SELECT_CONFIG_3 0x01000000 /* 1xTBI using RGMII bridge */
+#define SDR0_PFC1_SELECT_CONFIG_4 0x01400000 /* 2xRGMII using RGMII bridge */
+#define SDR0_PFC1_SELECT_CONFIG_5 0x01800000 /* 2xRTBI using RGMII bridge */
+#define SDR0_PFC1_SELECT_CONFIG_6 0x00800000 /* 2xSMII using ZMII bridge */
+
+#define SDR0_PFC1_U0ME_MASK 0x00080000 /* UART0 Mode Enable */
+#define SDR0_PFC1_U0ME_DSR_DTR 0x00000000 /* UART0 in DSR/DTR Mode */
+#define SDR0_PFC1_U0ME_CTS_RTS 0x00080000 /* UART0 in CTS/RTS Mode */
+#define SDR0_PFC1_U0IM_MASK 0x00040000 /* UART0 Interface Mode */
+#define SDR0_PFC1_U0IM_8PINS 0x00000000 /* UART0 Interface Mode 8 pins */
+#define SDR0_PFC1_U0IM_4PINS 0x00040000 /* UART0 Interface Mode 4 pins */
+#define SDR0_PFC1_SIS_MASK 0x00020000 /* SCP or IIC1 Selection */
+#define SDR0_PFC1_SIS_SCP_SEL 0x00000000 /* SCP Selected */
+#define SDR0_PFC1_SIS_IIC1_SEL 0x00020000 /* IIC1 Selected */
+#define SDR0_PFC1_UES_MASK 0x00010000 /* USB2D_RX_Active / EBC_Hold Req Selection */
+#define SDR0_PFC1_UES_USB2D_SEL 0x00000000 /* USB2D_RX_Active Selected */
+#define SDR0_PFC1_UES_EBCHR_SEL 0x00010000 /* EBC_Hold Req Selected */
+#define SDR0_PFC1_DIS_MASK 0x00008000 /* DMA_Req(1) / UIC_IRQ(5) Selection */
+#define SDR0_PFC1_DIS_DMAR_SEL 0x00000000 /* DMA_Req(1) Selected */
+#define SDR0_PFC1_DIS_UICIRQ5_SEL 0x00008000 /* UIC_IRQ(5) Selected */
+#define SDR0_PFC1_ERE_MASK 0x00004000 /* EBC Mast.Ext.Req.En./GPIO0(27) Selection */
+#define SDR0_PFC1_ERE_EXTR_SEL 0x00000000 /* EBC Mast.Ext.Req.En. Selected */
+#define SDR0_PFC1_ERE_GPIO0_27_SEL 0x00004000 /* GPIO0(27) Selected */
+#define SDR0_PFC1_UPR_MASK 0x00002000 /* USB2 Device Packet Reject Selection */
+#define SDR0_PFC1_UPR_DISABLE 0x00000000 /* USB2 Device Packet Reject Disable */
+#define SDR0_PFC1_UPR_ENABLE 0x00002000 /* USB2 Device Packet Reject Enable */
+
+#define SDR0_PFC1_PLB_PME_MASK 0x00001000 /* PLB3/PLB4 Perf. Monitor En. Selection */
+#define SDR0_PFC1_PLB_PME_PLB3_SEL 0x00000000 /* PLB3 Performance Monitor Enable */
+#define SDR0_PFC1_PLB_PME_PLB4_SEL 0x00001000 /* PLB3 Performance Monitor Enable */
+#define SDR0_PFC1_GFGGI_MASK 0x0000000F /* GPT Frequency Generation Gated In */
+
+/* Ethernet PLL Configuration Register */
+#define SDR0_PFC2 0x4102
+#define SDR0_PFC2_TUNE_MASK 0x01FF8000 /* Loop stability tuning bits */
+#define SDR0_PFC2_MULTI_MASK 0x00007C00 /* Frequency multiplication selector */
+#define SDR0_PFC2_RANGEB_MASK 0x00000380 /* PLLOUTB/C frequency selector */
+#define SDR0_PFC2_RANGEA_MASK 0x00000071 /* PLLOUTA frequency selector */
+
+#define SDR0_PFC2_SELECT_MASK 0xE0000000 /* Ethernet Pin select EMAC1 */
+#define SDR0_PFC2_SELECT_CONFIG_1_1 0x60000000 /* 1xMII using RGMII bridge */
+#define SDR0_PFC2_SELECT_CONFIG_1_2 0x00000000 /* 1xMII using ZMII bridge */
+#define SDR0_PFC2_SELECT_CONFIG_2 0x60000000 /* 1xGMII using RGMII bridge */
+#define SDR0_PFC2_SELECT_CONFIG_3 0x80000000 /* 1xTBI using RGMII bridge */
+#define SDR0_PFC2_SELECT_CONFIG_4 0xA0000000 /* 2xRGMII using RGMII bridge */
+#define SDR0_PFC2_SELECT_CONFIG_5 0xC0000000 /* 2xRTBI using RGMII bridge */
+#define SDR0_PFC2_SELECT_CONFIG_6 0x40000000 /* 2xSMII using ZMII bridge */
+
+/* USB2PHY0 Control Register */
+#define SDR0_USB2PHY0CR 0x4103
+#define SDR0_USB2PHY0CR_UTMICN_MASK 0x00100000 /* PHY UTMI interface connection */
+#define SDR0_USB2PHY0CR_UTMICN_DEV 0x00000000 /* Device support */
+#define SDR0_USB2PHY0CR_UTMICN_HOST 0x00100000 /* Host support */
+
+#define SDR0_USB2PHY0CR_DWNSTR_MASK 0x00400000 /* Select downstream port mode */
+#define SDR0_USB2PHY0CR_DWNSTR_DEV 0x00000000 /* Device */
+#define SDR0_USB2PHY0CR_DWNSTR_HOST 0x00400000 /* Host */
+
+#define SDR0_USB2PHY0CR_DVBUS_MASK 0x00800000 /* VBus detect (Device mode only) */
+#define SDR0_USB2PHY0CR_DVBUS_PURDIS 0x00000000 /* Pull-up resistance on D+ is disabled */
+#define SDR0_USB2PHY0CR_DVBUS_PUREN 0x00800000 /* Pull-up resistance on D+ is enabled */
+
+#define SDR0_USB2PHY0CR_WDINT_MASK 0x01000000 /* PHY UTMI data width and clock select */
+#define SDR0_USB2PHY0CR_WDINT_8BIT_60MHZ 0x00000000 /* 8-bit data/60MHz */
+#define SDR0_USB2PHY0CR_WDINT_16BIT_30MHZ 0x01000000 /* 16-bit data/30MHz */
+
+#define SDR0_USB2PHY0CR_LOOPEN_MASK 0x02000000 /* Loop back test enable */
+#define SDR0_USB2PHY0CR_LOOP_ENABLE 0x00000000 /* Loop back disabled */
+#define SDR0_USB2PHY0CR_LOOP_DISABLE 0x02000000 /* Loop back enabled (only test purposes) */
+
+#define SDR0_USB2PHY0CR_XOON_MASK 0x04000000 /* Force XO block on during a suspend */
+#define SDR0_USB2PHY0CR_XO_ON 0x00000000 /* PHY XO block is powered-on */
+#define SDR0_USB2PHY0CR_XO_OFF 0x04000000 /* PHY XO block is powered-off when all ports are suspended */
+
+#define SDR0_USB2PHY0CR_PWRSAV_MASK 0x08000000 /* Select PHY power-save mode */
+#define SDR0_USB2PHY0CR_PWRSAV_OFF 0x00000000 /* Non-power-save mode */
+#define SDR0_USB2PHY0CR_PWRSAV_ON 0x08000000 /* Power-save mode. Valid only for full-speed operation */
+
+#define SDR0_USB2PHY0CR_XOREF_MASK 0x10000000 /* Select reference clock source */
+#define SDR0_USB2PHY0CR_XOREF_INTERNAL 0x00000000 /* PHY PLL uses chip internal 48M clock as a reference */
+#define SDR0_USB2PHY0CR_XOREF_XO 0x10000000 /* PHY PLL uses internal XO block output as a reference */
+
+#define SDR0_USB2PHY0CR_XOCLK_MASK 0x20000000 /* Select clock for XO block */
+#define SDR0_USB2PHY0CR_XOCLK_EXTERNAL 0x00000000 /* PHY macro used an external clock */
+#define SDR0_USB2PHY0CR_XOCLK_CRYSTAL 0x20000000 /* PHY macro uses the clock from a crystal */
+
+#define SDR0_USB2PHY0CR_CLKSEL_MASK 0xc0000000 /* Select ref clk freq */
+#define SDR0_USB2PHY0CR_CLKSEL_12MHZ 0x00000000 /* Select ref clk freq = 12 MHz*/
+#define SDR0_USB2PHY0CR_CLKSEL_48MHZ 0x40000000 /* Select ref clk freq = 48 MHz*/
+#define SDR0_USB2PHY0CR_CLKSEL_24MHZ 0x80000000 /* Select ref clk freq = 24 MHz*/
+
+/* Miscealleneaous Function Reg. */
+#define SDR0_MFR 0x4300
+#define SDR0_MFR_ETH0_CLK_SEL_MASK 0x08000000 /* Ethernet0 Clock Select */
+#define SDR0_MFR_ETH0_CLK_SEL_EXT 0x00000000
+#define SDR0_MFR_ETH1_CLK_SEL_MASK 0x04000000 /* Ethernet1 Clock Select */
+#define SDR0_MFR_ETH1_CLK_SEL_EXT 0x00000000
+#define SDR0_MFR_ZMII_MODE_MASK 0x03000000 /* ZMII Mode Mask */
+#define SDR0_MFR_ZMII_MODE_MII 0x00000000 /* ZMII Mode MII */
+#define SDR0_MFR_ZMII_MODE_SMII 0x01000000 /* ZMII Mode SMII */
+#define SDR0_MFR_ZMII_MODE_BIT0 0x02000000 /* ZMII Mode Bit0 */
+#define SDR0_MFR_ZMII_MODE_BIT1 0x01000000 /* ZMII Mode Bit1 */
+#define SDR0_MFR_ZM_ENCODE(n) ((((unsigned long)(n))&0x3)<<24)
+#define SDR0_MFR_ZM_DECODE(n) ((((unsigned long)(n))<<24)&0x3)
+
+#define SDR0_MFR_ERRATA3_EN0 0x00800000
+#define SDR0_MFR_ERRATA3_EN1 0x00400000
+#define SDR0_MFR_PKT_REJ_MASK 0x00180000 /* Pkt Rej. Enable Mask */
+#define SDR0_MFR_PKT_REJ_EN 0x00180000 /* Pkt Rej. Enable on both EMAC3 0-1 */
+#define SDR0_MFR_PKT_REJ_EN0 0x00100000 /* Pkt Rej. Enable on EMAC3(0) */
+#define SDR0_MFR_PKT_REJ_EN1 0x00080000 /* Pkt Rej. Enable on EMAC3(1) */
+#define SDR0_MFR_PKT_REJ_POL 0x00200000 /* Packet Reject Polarity */
+
+#endif /* defined(CONFIG_440EPX) || defined(CONFIG_440GRX) */
+
/* CUST0 Customer Configuration Register0 */
#define SDR0_CUST0 0x4000
#define SDR0_CUST0_MUX_E_N_G_MASK 0xC0000000 /* Mux_Emac_NDFC_GPIO */
@@ -1007,27 +1243,18 @@
#define SDR0_PFC1_PLB_PME_PLB4_SEL 0x00001000 /* PLB3 Performance Monitor Enable */
#define SDR0_PFC1_GFGGI_MASK 0x0000000F /* GPT Frequency Generation Gated In */
-/* Miscealleneaous Function Reg. */
-#define SDR0_MFR 0x4300
-#define SDR0_MFR_ETH0_CLK_SEL 0x08000000 /* Ethernet0 Clock Select */
-#define SDR0_MFR_ETH1_CLK_SEL 0x04000000 /* Ethernet1 Clock Select */
-#define SDR0_MFR_ZMII_MODE_MASK 0x03000000 /* ZMII Mode Mask */
-#define SDR0_MFR_ZMII_MODE_MII 0x00000000 /* ZMII Mode MII */
-#define SDR0_MFR_ZMII_MODE_SMII 0x01000000 /* ZMII Mode SMII */
-#define SDR0_MFR_ZMII_MODE_RMII_10M 0x02000000 /* ZMII Mode RMII - 10 Mbs */
-#define SDR0_MFR_ZMII_MODE_RMII_100M 0x03000000 /* ZMII Mode RMII - 100 Mbs */
-#define SDR0_MFR_ZMII_MODE_BIT0 0x02000000 /* ZMII Mode Bit0 */
-#define SDR0_MFR_ZMII_MODE_BIT1 0x01000000 /* ZMII Mode Bit1 */
-#define SDR0_MFR_ZM_ENCODE(n) ((((unsigned long)(n))&0x3)<<24)
-#define SDR0_MFR_ZM_DECODE(n) ((((unsigned long)(n))<<24)&0x3)
-
-#define SDR0_MFR_ERRATA3_EN0 0x00800000
-#define SDR0_MFR_ERRATA3_EN1 0x00400000
-#define SDR0_MFR_PKT_REJ_MASK 0x00300000 /* Pkt Rej. Enable Mask */
-#define SDR0_MFR_PKT_REJ_EN 0x00300000 /* Pkt Rej. Enable on both EMAC3 0-1 */
-#define SDR0_MFR_PKT_REJ_EN0 0x00200000 /* Pkt Rej. Enable on EMAC3(0) */
-#define SDR0_MFR_PKT_REJ_EN1 0x00100000 /* Pkt Rej. Enable on EMAC3(1) */
-#define SDR0_MFR_PKT_REJ_POL 0x00080000 /* Packet Reject Polarity */
+/*-----------------------------------------------------------------------------
+ | Internal SRAM
+ +----------------------------------------------------------------------------*/
+#define ISRAM0_DCR_BASE 0x380
+#define isram0_sb0cr (ISRAM0_DCR_BASE+0x00) /* SRAM bank config 0*/
+#define isram0_bear (ISRAM0_DCR_BASE+0x04) /* SRAM bus error addr reg */
+#define isram0_besr0 (ISRAM0_DCR_BASE+0x05) /* SRAM bus error status reg 0 */
+#define isram0_besr1 (ISRAM0_DCR_BASE+0x06) /* SRAM bus error status reg 1 */
+#define isram0_pmeg (ISRAM0_DCR_BASE+0x07) /* SRAM power management */
+#define isram0_cid (ISRAM0_DCR_BASE+0x08) /* SRAM bus core id reg */
+#define isram0_revid (ISRAM0_DCR_BASE+0x09) /* SRAM bus revision id reg */
+#define isram0_dpc (ISRAM0_DCR_BASE+0x0a) /* SRAM data parity check reg */
#else
@@ -1121,7 +1348,7 @@
#define uic1vr (UIC1_DCR_BASE+0x7) /* UIC1 vector */
#define uic1vcr (UIC1_DCR_BASE+0x8) /* UIC1 vector configuration */
-#if defined(CONFIG_440SPE)
+#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
#define UIC2_DCR_BASE 0xe0
#define uic2sr (UIC0_DCR_BASE+0x0) /* UIC2 status-Read Clear */
#define uic2srs (UIC0_DCR_BASE+0x1) /* UIC2 status-Read Set */
@@ -1343,8 +1570,8 @@
#define malrxctp0r (MAL_DCR_BASE+0x40) /* RX 0 Channel table pointer reg */
#define malrxctp1r (MAL_DCR_BASE+0x41) /* RX 1 Channel table pointer reg */
#if defined(CONFIG_440GX)
-#define malrxctp2r (MAL_DCR_BASE+0x42) /* RX 0 Channel table pointer reg */
-#define malrxctp3r (MAL_DCR_BASE+0x43) /* RX 1 Channel table pointer reg */
+#define malrxctp2r (MAL_DCR_BASE+0x42) /* RX 2 Channel table pointer reg */
+#define malrxctp3r (MAL_DCR_BASE+0x43) /* RX 3 Channel table pointer reg */
#endif /* CONFIG_440GX */
#define malrcbs0 (MAL_DCR_BASE+0x60) /* RX 0 Channel buffer size reg */
#define malrcbs1 (MAL_DCR_BASE+0x61) /* RX 1 Channel buffer size reg */
@@ -1423,6 +1650,46 @@
#define UIC_EIR6 0x00000004 /* External interrupt 6 */
#define UIC_UIC1NC 0x00000002 /* UIC1 non-critical interrupt */
#define UIC_UIC1C 0x00000001 /* UIC1 critical interrupt */
+
+#elif defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+
+#define UIC_U0 0x80000000 /* UART 0 */
+#define UIC_U1 0x40000000 /* UART 1 */
+#define UIC_IIC0 0x20000000 /* IIC */
+#define UIC_KRD 0x10000000 /* Kasumi Ready for data */
+#define UIC_KDA 0x08000000 /* Kasumi Data Available */
+#define UIC_PCRW 0x04000000 /* PCI command register write */
+#define UIC_PPM 0x02000000 /* PCI power management */
+#define UIC_IIC1 0x01000000 /* IIC */
+#define UIC_SPI 0x00800000 /* SPI */
+#define UIC_EPCISER 0x00400000 /* External PCI SERR */
+#define UIC_MTE 0x00200000 /* MAL TXEOB */
+#define UIC_MRE 0x00100000 /* MAL RXEOB */
+#define UIC_D0 0x00080000 /* DMA channel 0 */
+#define UIC_D1 0x00040000 /* DMA channel 1 */
+#define UIC_D2 0x00020000 /* DMA channel 2 */
+#define UIC_D3 0x00010000 /* DMA channel 3 */
+#define UIC_UD0 0x00008000 /* UDMA irq 0 */
+#define UIC_UD1 0x00004000 /* UDMA irq 1 */
+#define UIC_UD2 0x00002000 /* UDMA irq 2 */
+#define UIC_UD3 0x00001000 /* UDMA irq 3 */
+#define UIC_HSB2D 0x00000800 /* USB2.0 Device */
+#define UIC_OHCI1 0x00000400 /* USB2.0 Host OHCI irq 1 */
+#define UIC_OHCI2 0x00000200 /* USB2.0 Host OHCI irq 2 */
+#define UIC_EIP94 0x00000100 /* Security EIP94 */
+#define UIC_ETH0 0x00000080 /* Emac 0 */
+#define UIC_ETH1 0x00000040 /* Emac 1 */
+#define UIC_EHCI 0x00000020 /* USB2.0 Host EHCI */
+#define UIC_EIR4 0x00000010 /* External interrupt 4 */
+#define UIC_UIC2NC 0x00000008 /* UIC2 non-critical interrupt */
+#define UIC_UIC2C 0x00000004 /* UIC2 critical interrupt */
+#define UIC_UIC1NC 0x00000002 /* UIC1 non-critical interrupt */
+#define UIC_UIC1C 0x00000001 /* UIC1 critical interrupt */
+
+/* For compatibility with 405 code */
+#define UIC_MAL_TXEOB UIC_MTE
+#define UIC_MAL_RXEOB UIC_MRE
+
#elif !defined(CONFIG_440SPE)
#define UIC_U0 0x80000000 /* UART 0 */
#define UIC_U1 0x40000000 /* UART 1 */
@@ -1531,6 +1798,48 @@
#define UIC_EWU0 0x00000004 /* Ethernet 0 wakeup */
#define UIC_ETH1 0x00000002 /* Ethernet 1 */
#define UIC_EWU1 0x00000001 /* Ethernet 1 wakeup */
+
+#elif defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+
+#define UIC_MS 0x80000000 /* MAL SERR */
+#define UIC_MTDE 0x40000000 /* MAL TXDE */
+#define UIC_MRDE 0x20000000 /* MAL RXDE */
+#define UIC_U2 0x10000000 /* UART 2 */
+#define UIC_U3 0x08000000 /* UART 3 */
+#define UIC_EBCO 0x04000000 /* EBCO interrupt status */
+#define UIC_NDFC 0x02000000 /* NDFC */
+#define UIC_KSLE 0x01000000 /* KASUMI slave error */
+#define UIC_CT5 0x00800000 /* GPT compare timer 5 */
+#define UIC_CT6 0x00400000 /* GPT compare timer 6 */
+#define UIC_PLB34I0 0x00200000 /* PLB3X4X MIRQ0 */
+#define UIC_PLB34I1 0x00100000 /* PLB3X4X MIRQ1 */
+#define UIC_PLB34I2 0x00080000 /* PLB3X4X MIRQ2 */
+#define UIC_PLB34I3 0x00040000 /* PLB3X4X MIRQ3 */
+#define UIC_PLB34I4 0x00020000 /* PLB3X4X MIRQ4 */
+#define UIC_PLB34I5 0x00010000 /* PLB3X4X MIRQ5 */
+#define UIC_CT0 0x00008000 /* GPT compare timer 0 */
+#define UIC_CT1 0x00004000 /* GPT compare timer 1 */
+#define UIC_EIR7 0x00002000 /* External interrupt 7 */
+#define UIC_EIR8 0x00001000 /* External interrupt 8 */
+#define UIC_EIR9 0x00000800 /* External interrupt 9 */
+#define UIC_CT2 0x00000400 /* GPT compare timer 2 */
+#define UIC_CT3 0x00000200 /* GPT compare timer 3 */
+#define UIC_CT4 0x00000100 /* GPT compare timer 4 */
+#define UIC_SRE 0x00000080 /* Serial ROM error */
+#define UIC_GPTDC 0x00000040 /* GPT decrementer pulse */
+#define UIC_RSVD0 0x00000020 /* Reserved */
+#define UIC_EPCIPER 0x00000010 /* External PCI PERR */
+#define UIC_EIR0 0x00000008 /* External interrupt 0 */
+#define UIC_EWU0 0x00000004 /* Ethernet 0 wakeup */
+#define UIC_EIR1 0x00000002 /* External interrupt 1 */
+#define UIC_EWU1 0x00000001 /* Ethernet 1 wakeup */
+
+/* For compatibility with 405 code */
+#define UIC_MAL_SERR UIC_MS
+#define UIC_MAL_TXDE UIC_MTDE
+#define UIC_MAL_RXDE UIC_MRDE
+#define UIC_ENET UIC_ETH0
+
#elif !defined(CONFIG_440SPE)
#define UIC_MS 0x80000000 /* MAL SERR */
#define UIC_MTDE 0x40000000 /* MAL TXDE */
@@ -1608,6 +1917,20 @@
#define UIC_RSVD29 0x00000004 /* Reserved */
#define UIC_RSVD30 0x00000002 /* Reserved */
#define UIC_RSVD31 0x00000001 /* Reserved */
+
+#elif defined(CONFIG_440EPX) || defined(CONFIG_440GRX) /* UIC2 */
+
+#define UIC_EIR5 0x80000000 /* External interrupt 5 */
+#define UIC_EIR6 0x40000000 /* External interrupt 6 */
+#define UIC_OPB 0x20000000 /* OPB to PLB bridge interrupt stat */
+#define UIC_EIR2 0x10000000 /* External interrupt 2 */
+#define UIC_EIR3 0x08000000 /* External interrupt 3 */
+#define UIC_DDR2 0x04000000 /* DDR2 sdram */
+#define UIC_MCTX0 0x02000000 /* MAl intp coalescence TX0 */
+#define UIC_MCTX1 0x01000000 /* MAl intp coalescence TX1 */
+#define UIC_MCTR0 0x00800000 /* MAl intp coalescence TR0 */
+#define UIC_MCTR1 0x00400000 /* MAl intp coalescence TR1 */
+
#endif /* CONFIG_440GX */
/*---------------------------------------------------------------------------+
@@ -1623,6 +1946,17 @@
#define UICB0_ALL (UICB0_UIC0CI | UICB0_UIC0NCI | UICB0_UIC1CI | \
UICB0_UIC1NCI | UICB0_UIC2CI | UICB0_UIC2NCI)
+
+#elif defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+
+#define UICB0_UIC1CI 0x00000000 /* UIC1 Critical Interrupt */
+#define UICB0_UIC1NCI 0x00000000 /* UIC1 Noncritical Interrupt */
+#define UICB0_UIC2CI 0x00000000 /* UIC2 Critical Interrupt */
+#define UICB0_UIC2NCI 0x00000000 /* UIC2 Noncritical Interrupt */
+
+#define UICB0_ALL (UICB0_UIC1CI | UICB0_UIC1NCI | \
+ UICB0_UIC1CI | UICB0_UIC2NCI)
+
#endif /* CONFIG_440GX */
/*---------------------------------------------------------------------------+
| Universal interrupt controller interrupts
@@ -2262,7 +2596,8 @@
#define SDR0_SDSTP1_PAE_MASK (0x80000000 >> 13)
#define SDR0_SDSTP1_PISE_MASK (0x80000000 >> 15)
#endif /* defined(CONFIG_440GX) || defined(CONFIG_440SP) */
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
#define SDR0_SDSTP1_PAE_MASK (0x80000000 >> 21)
#define SDR0_SDSTP1_PAME_MASK (0x80000000 >> 27)
#endif /* defined(CONFIG_440EP) || defined(CONFIG_440GR) */
@@ -2390,11 +2725,81 @@
#define SDR0_MFR_ZMII_MODE_BIT1 0x01000000 /* ZMII Mode Bit1 */
#define SDR0_MFR_ERRATA3_EN0 0x00800000
#define SDR0_MFR_ERRATA3_EN1 0x00400000
+#if defined(CONFIG_440GX) /* test-only: only 440GX or 440SPE??? */
#define SDR0_MFR_PKT_REJ_MASK 0x00300000 /* Pkt Rej. Enable Mask */
#define SDR0_MFR_PKT_REJ_EN 0x00300000 /* Pkt Rej. Enable on both EMAC3 0-1 */
#define SDR0_MFR_PKT_REJ_EN0 0x00200000 /* Pkt Rej. Enable on EMAC3(0) */
#define SDR0_MFR_PKT_REJ_EN1 0x00100000 /* Pkt Rej. Enable on EMAC3(1) */
#define SDR0_MFR_PKT_REJ_POL 0x00080000 /* Packet Reject Polarity */
+#endif
+
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+#define SDR0_PFC1_EPS_ENCODE(n) ((((unsigned long)(n))&0x07)<<22)
+#define SDR0_PFC1_EPS_DECODE(n) ((((unsigned long)(n))>>22)&0x07)
+#define SDR0_PFC2_EPS_ENCODE(n) ((((unsigned long)(n))&0x07)<<29)
+#define SDR0_PFC2_EPS_DECODE(n) ((((unsigned long)(n))>>29)&0x07)
+#endif
+
+#define SDR0_MFR_ECS_MASK 0x10000000
+#define SDR0_MFR_ECS_INTERNAL 0x10000000
+
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+#define SDR0_SRST0 0x200
+#define SDR0_SRST0_BGO 0x80000000 /* PLB to OPB bridge */
+#define SDR0_SRST0_PLB4 0x40000000 /* PLB4 arbiter */
+#define SDR0_SRST0_EBC 0x20000000 /* External bus controller */
+#define SDR0_SRST0_OPB 0x10000000 /* OPB arbiter */
+#define SDR0_SRST0_UART0 0x08000000 /* Universal asynchronous receiver/transmitter 0 */
+#define SDR0_SRST0_UART1 0x04000000 /* Universal asynchronous receiver/transmitter 1 */
+#define SDR0_SRST0_IIC0 0x02000000 /* Inter integrated circuit 0 */
+#define SDR0_SRST0_USB2H 0x01000000 /* USB2.0 Host */
+#define SDR0_SRST0_GPIO 0x00800000 /* General purpose I/O */
+#define SDR0_SRST0_GPT 0x00400000 /* General purpose timer */
+#define SDR0_SRST0_DMC 0x00200000 /* DDR SDRAM memory controller */
+#define SDR0_SRST0_PCI 0x00100000 /* PCI */
+#define SDR0_SRST0_EMAC0 0x00080000 /* Ethernet media access controller 0 */
+#define SDR0_SRST0_EMAC1 0x00040000 /* Ethernet media access controller 1 */
+#define SDR0_SRST0_CPM0 0x00020000 /* Clock and power management */
+#define SDR0_SRST0_ZMII 0x00010000 /* ZMII bridge */
+#define SDR0_SRST0_UIC0 0x00008000 /* Universal interrupt controller 0 */
+#define SDR0_SRST0_UIC1 0x00004000 /* Universal interrupt controller 1 */
+#define SDR0_SRST0_IIC1 0x00002000 /* Inter integrated circuit 1 */
+#define SDR0_SRST0_SCP 0x00001000 /* Serial communications port */
+#define SDR0_SRST0_BGI 0x00000800 /* OPB to PLB bridge */
+#define SDR0_SRST0_DMA 0x00000400 /* Direct memory access controller */
+#define SDR0_SRST0_DMAC 0x00000200 /* DMA channel */
+#define SDR0_SRST0_MAL 0x00000100 /* Media access layer */
+#define SDR0_SRST0_USB2D 0x00000080 /* USB2.0 device */
+#define SDR0_SRST0_GPTR 0x00000040 /* General purpose timer */
+#define SDR0_SRST0_P4P3 0x00000010 /* PLB4 to PLB3 bridge */
+#define SDR0_SRST0_P3P4 0x00000008 /* PLB3 to PLB4 bridge */
+#define SDR0_SRST0_PLB3 0x00000004 /* PLB3 arbiter */
+#define SDR0_SRST0_UART2 0x00000002 /* Universal asynchronous receiver/transmitter 2 */
+#define SDR0_SRST0_UART3 0x00000001 /* Universal asynchronous receiver/transmitter 3 */
+
+#define SDR0_SRST1 0x201
+#define SDR0_SRST1_NDFC 0x80000000 /* Nand flash controller */
+#define SDR0_SRST1_OPBA1 0x40000000 /* OPB Arbiter attached to PLB4 */
+#define SDR0_SRST1_P4OPB0 0x20000000 /* PLB4 to OPB Bridge0 */
+#define SDR0_SRST1_PLB42OPB0 SDR0_SRST1_P4OPB0
+#define SDR0_SRST1_DMA4 0x10000000 /* DMA to PLB4 */
+#define SDR0_SRST1_DMA4CH 0x08000000 /* DMA Channel to PLB4 */
+#define SDR0_SRST1_OPBA2 0x04000000 /* OPB Arbiter attached to PLB4 USB 2.0 Host */
+#define SDR0_SRST1_OPB2PLB40 0x02000000 /* OPB to PLB4 Bridge attached to USB 2.0 Host */
+#define SDR0_SRST1_PLB42OPB1 0x01000000 /* PLB4 to OPB Bridge attached to USB 2.0 Host */
+#define SDR0_SRST1_CPM1 0x00800000 /* Clock and Power management 1 */
+#define SDR0_SRST1_UIC2 0x00400000 /* Universal Interrupt Controller 2 */
+#define SDR0_SRST1_CRYP0 0x00200000 /* Security Engine */
+#define SDR0_SRST1_USB20PHY 0x00100000 /* USB 2.0 Phy */
+#define SDR0_SRST1_USB2HUTMI 0x00080000 /* USB 2.0 Host UTMI Interface */
+#define SDR0_SRST1_USB2HPHY 0x00040000 /* USB 2.0 Host Phy Interface */
+#define SDR0_SRST1_SRAM0 0x00020000 /* Internal SRAM Controller */
+#define SDR0_SRST1_RGMII0 0x00010000 /* RGMII Bridge */
+#define SDR0_SRST1_ETHPLL 0x00008000 /* Ethernet PLL */
+#define SDR0_SRST1_FPU 0x00004000 /* Floating Point Unit */
+#define SDR0_SRST1_KASU0 0x00002000 /* Kasumi Engine */
+
+#else
#define SDR0_SRST_BGO 0x80000000
#define SDR0_SRST_PLB 0x40000000
@@ -2427,10 +2832,15 @@
#define SDR0_SRST_EMAC3 0x00000008
#define SDR0_SRST_RGMII 0x00000001
+#endif
+
/*-----------------------------------------------------------------------------+
| Clocking
+-----------------------------------------------------------------------------*/
-#if !defined (CONFIG_440GX) && !defined(CONFIG_440EP) && !defined(CONFIG_440GR) && !defined(CONFIG_440SP) && !defined(CONFIG_440SPE)
+#if !defined (CONFIG_440GX) && \
+ !defined(CONFIG_440EP) && !defined(CONFIG_440GR) && \
+ !defined(CONFIG_440EPX) && !defined(CONFIG_440GRX) && \
+ !defined(CONFIG_440SP) && !defined(CONFIG_440SPE)
#define PLLSYS0_TUNE_MASK 0xffc00000 /* PLL TUNE bits */
#define PLLSYS0_FB_DIV_MASK 0x003c0000 /* Feedback divisor */
#define PLLSYS0_FWD_DIV_A_MASK 0x00038000 /* Forward divisor A */
@@ -2498,6 +2908,120 @@
#define PLLSYS1_NTO1_MASK 0x00000001 /* CPU:PLB N-to-1 ratio */
#endif /* CONFIG_440GX */
+#if defined (CONFIG_440EPX) || defined (CONFIG_440GRX)
+/*--------------------------------------*/
+#define CPR0_PLLC 0x40
+#define CPR0_PLLC_RST_MASK 0x80000000
+#define CPR0_PLLC_RST_PLLLOCKED 0x00000000
+#define CPR0_PLLC_RST_PLLRESET 0x80000000
+#define CPR0_PLLC_ENG_MASK 0x40000000
+#define CPR0_PLLC_ENG_DISABLE 0x00000000
+#define CPR0_PLLC_ENG_ENABLE 0x40000000
+#define CPR0_PLLC_ENG_ENCODE(n) ((((unsigned long)(n))&0x01)<<30)
+#define CPR0_PLLC_ENG_DECODE(n) ((((unsigned long)(n))>>30)&0x01)
+#define CPR0_PLLC_SRC_MASK 0x20000000
+#define CPR0_PLLC_SRC_PLLOUTA 0x00000000
+#define CPR0_PLLC_SRC_PLLOUTB 0x20000000
+#define CPR0_PLLC_SRC_ENCODE(n) ((((unsigned long)(n))&0x01)<<29)
+#define CPR0_PLLC_SRC_DECODE(n) ((((unsigned long)(n))>>29)&0x01)
+#define CPR0_PLLC_SEL_MASK 0x07000000
+#define CPR0_PLLC_SEL_PLL 0x00000000
+#define CPR0_PLLC_SEL_CPU 0x01000000
+#define CPR0_PLLC_SEL_PER 0x05000000
+#define CPR0_PLLC_SEL_ENCODE(n) ((((unsigned long)(n))&0x07)<<24)
+#define CPR0_PLLC_SEL_DECODE(n) ((((unsigned long)(n))>>24)&0x07)
+#define CPR0_PLLC_TUNE_MASK 0x000003FF
+#define CPR0_PLLC_TUNE_ENCODE(n) ((((unsigned long)(n))&0x3FF)<<0)
+#define CPR0_PLLC_TUNE_DECODE(n) ((((unsigned long)(n))>>0)&0x3FF)
+/*--------------------------------------*/
+#define CPR0_PLLD 0x60
+#define CPR0_PLLD_FBDV_MASK 0x1F000000
+#define CPR0_PLLD_FBDV_ENCODE(n) ((((unsigned long)(n))&0x1F)<<24)
+#define CPR0_PLLD_FBDV_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x1F)+1)
+#define CPR0_PLLD_FWDVA_MASK 0x000F0000
+#define CPR0_PLLD_FWDVA_ENCODE(n) ((((unsigned long)(n))&0x0F)<<16)
+#define CPR0_PLLD_FWDVA_DECODE(n) ((((((unsigned long)(n))>>16)-1)&0x0F)+1)
+#define CPR0_PLLD_FWDVB_MASK 0x00000700
+#define CPR0_PLLD_FWDVB_ENCODE(n) ((((unsigned long)(n))&0x07)<<8)
+#define CPR0_PLLD_FWDVB_DECODE(n) ((((((unsigned long)(n))>>8)-1)&0x07)+1)
+#define CPR0_PLLD_LFBDV_MASK 0x0000003F
+#define CPR0_PLLD_LFBDV_ENCODE(n) ((((unsigned long)(n))&0x3F)<<0)
+#define CPR0_PLLD_LFBDV_DECODE(n) ((((((unsigned long)(n))>>0)-1)&0x3F)+1)
+/*--------------------------------------*/
+#define CPR0_PRIMAD 0x80
+#define CPR0_PRIMAD_PRADV0_MASK 0x07000000
+#define CPR0_PRIMAD_PRADV0_ENCODE(n) ((((unsigned long)(n))&0x07)<<24)
+#define CPR0_PRIMAD_PRADV0_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x07)+1)
+/*--------------------------------------*/
+#define CPR0_PRIMBD 0xA0
+#define CPR0_PRIMBD_PRBDV0_MASK 0x07000000
+#define CPR0_PRIMBD_PRBDV0_ENCODE(n) ((((unsigned long)(n))&0x07)<<24)
+#define CPR0_PRIMBD_PRBDV0_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x07)+1)
+/*--------------------------------------*/
+#if 0
+#define CPR0_CPM0_ER 0xB0 /* CPM Enable Register */
+#define CPR0_CPM0_FR 0xB1 /* CPM Force Register */
+#define CPR0_CPM0_SR 0xB2 /* CPM Status Register */
+#define CPR0_CPM0_IIC0 0x80000000 /* Inter-Intergrated Circuit0 */
+#define CPR0_CPM0_IIC1 0x40000000 /* Inter-Intergrated Circuit1 */
+#define CPR0_CPM0_PCI 0x20000000 /* Peripheral Component Interconnect */
+#define CPR0_CPM0_USB1H 0x08000000 /* USB1.1 Host */
+#define CPR0_CPM0_FPU 0x04000000 /* PPC440 FPU */
+#define CPR0_CPM0_CPU 0x02000000 /* PPC440x5 Processor Core */
+#define CPR0_CPM0_DMA 0x01000000 /* Direct Memory Access Controller */
+#define CPR0_CPM0_BGO 0x00800000 /* PLB to OPB Bridge */
+#define CPR0_CPM0_BGI 0x00400000 /* OPB to PLB Bridge */
+#define CPR0_CPM0_EBC 0x00200000 /* External Bus Controller */
+#define CPR0_CPM0_NDFC 0x00100000 /* Nand Flash Controller */
+#define CPR0_CPM0_MADMAL 0x00080000 /* DDR SDRAM Controller or MADMAL ??? */
+#define CPR0_CPM0_DMC 0x00080000 /* DDR SDRAM Controller or MADMAL ??? */
+#define CPR0_CPM0_PLB4 0x00040000 /* PLB4 Arbiter */
+#define CPR0_CPM0_PLB4x3x 0x00020000 /* PLB4 to PLB3 */
+#define CPR0_CPM0_PLB3x4x 0x00010000 /* PLB3 to PLB4 */
+#define CPR0_CPM0_PLB3 0x00008000 /* PLB3 Arbiter */
+#define CPR0_CPM0_PPM 0x00002000 /* PLB Performance Monitor */
+#define CPR0_CPM0_UIC1 0x00001000 /* Universal Interrupt Controller 1 */
+#define CPR0_CPM0_GPIO 0x00000800 /* General Purpose IO */
+#define CPR0_CPM0_GPT 0x00000400 /* General Purpose Timer */
+#define CPR0_CPM0_UART0 0x00000200 /* Universal Asynchronous Rcver/Xmitter 0 */
+#define CPR0_CPM0_UART1 0x00000100 /* Universal Asynchronous Rcver/Xmitter 1 */
+#define CPR0_CPM0_UIC0 0x00000080 /* Universal Interrupt Controller 0 */
+#define CPR0_CPM0_TMRCLK 0x00000040 /* CPU Timer */
+#define CPR0_CPM0_EMC0 0x00000020 /* Ethernet 0 */
+#define CPR0_CPM0_EMC1 0x00000010 /* Ethernet 1 */
+#define CPR0_CPM0_UART2 0x00000008 /* Universal Asynchronous Rcver/Xmitter 2 */
+#define CPR0_CPM0_UART3 0x00000004 /* Universal Asynchronous Rcver/Xmitter 3 */
+#define CPR0_CPM0_USB2D 0x00000002 /* USB2.0 Device */
+#define CPR0_CPM0_USB2H 0x00000001 /* USB2.0 Host */
+#endif
+/*--------------------------------------*/
+#define CPR0_OPBD 0xC0
+#define CPR0_OPBD_OPBDV0_MASK 0x03000000
+#define CPR0_OPBD_OPBDV0_ENCODE(n) ((((unsigned long)(n))&0x03)<<24)
+#define CPR0_OPBD_OPBDV0_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x03)+1)
+/*--------------------------------------*/
+#define CPR0_PERD 0xE0
+#define CPR0_PERD_PERDV0_MASK 0x07000000
+#define CPR0_PERD_PERDV0_ENCODE(n) ((((unsigned long)(n))&0x07)<<24)
+#define CPR0_PERD_PERDV0_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x07)+1)
+/*--------------------------------------*/
+#define CPR0_MALD 0x100
+#define CPR0_MALD_MALDV0_MASK 0x03000000
+#define CPR0_MALD_MALDV0_ENCODE(n) ((((unsigned long)(n))&0x03)<<24)
+#define CPR0_MALD_MALDV0_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x03)+1)
+/*--------------------------------------*/
+#define CPR0_SPCID 0x120
+#define CPR0_SPCID_SPCIDV0_MASK 0x03000000
+#define CPR0_SPCID_SPCIDV0_ENCODE(n) ((((unsigned long)(n))&0x03)<<24)
+#define CPR0_SPCID_SPCIDV0_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x03)+1)
+/*--------------------------------------*/
+#define CPR0_ICFG 0x140
+#define CPR0_ICFG_RLI_MASK 0x80000000
+#define CPR0_ICFG_RLI_RESETCPR 0x00000000
+#define CPR0_ICFG_RLI_PRESERVECPR 0x80000000
+#define CPR0_ICFG_ICS_MASK 0x00000007
+#endif /* defined (CONFIG_440EPX) || defined (CONFIG_440GRX) */
+
/*-----------------------------------------------------------------------------
| IIC Register Offsets
'----------------------------------------------------------------------------*/
@@ -2539,7 +3063,8 @@
#define PCIX0_CFGBASE (CFG_PCI_BASE + 0x0ec80000)
#define PCIX0_IOBASE (CFG_PCI_BASE + 0x08000000)
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
/* PCI Local Configuration Registers
--------------------------------- */
@@ -2625,6 +3150,33 @@
#endif /* !defined(CONFIG_440EP) !defined(CONFIG_440GR) */
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+
+/* USB2.0 Device */
+#define USB2D0_BASE CFG_USB2D0_BASE
+
+#define USB2D0_INTRIN (USB2D0_BASE + 0x00000000)
+
+#define USB2D0_INTRIN (USB2D0_BASE + 0x00000000) /* Interrupt register for Endpoint 0 plus IN Endpoints 1 to 3 */
+#define USB2D0_POWER (USB2D0_BASE + 0x00000000) /* Power management register */
+#define USB2D0_FADDR (USB2D0_BASE + 0x00000000) /* Function address register */
+#define USB2D0_INTRINE (USB2D0_BASE + 0x00000000) /* Interrupt enable register for USB2D0_INTRIN */
+#define USB2D0_INTROUT (USB2D0_BASE + 0x00000000) /* Interrupt register for OUT Endpoints 1 to 3 */
+#define USB2D0_INTRUSBE (USB2D0_BASE + 0x00000000) /* Interrupt enable register for USB2D0_INTRUSB */
+#define USB2D0_INTRUSB (USB2D0_BASE + 0x00000000) /* Interrupt register for common USB interrupts */
+#define USB2D0_INTROUTE (USB2D0_BASE + 0x00000000) /* Interrupt enable register for IntrOut */
+#define USB2D0_TSTMODE (USB2D0_BASE + 0x00000000) /* Enables the USB 2.0 test modes */
+#define USB2D0_INDEX (USB2D0_BASE + 0x00000000) /* Index register for selecting the Endpoint status/control registers */
+#define USB2D0_FRAME (USB2D0_BASE + 0x00000000) /* Frame number */
+#define USB2D0_INCSR0 (USB2D0_BASE + 0x00000000) /* Control Status register for Endpoint 0. (Index register set to select Endpoint 0) */
+#define USB2D0_INCSR (USB2D0_BASE + 0x00000000) /* Control Status register for IN Endpoint. (Index register set to select Endpoints 13) */
+#define USB2D0_INMAXP (USB2D0_BASE + 0x00000000) /* Maximum packet size for IN Endpoint. (Index register set to select Endpoints 13) */
+#define USB2D0_OUTCSR (USB2D0_BASE + 0x00000000) /* Control Status register for OUT Endpoint. (Index register set to select Endpoints 13) */
+#define USB2D0_OUTMAXP (USB2D0_BASE + 0x00000000) /* Maximum packet size for OUT Endpoint. (Index register set to select Endpoints 13) */
+#define USB2D0_OUTCOUNT0 (USB2D0_BASE + 0x00000000) /* Number of received bytes in Endpoint 0 FIFO. (Index register set to select Endpoint 0) */
+#define USB2D0_OUTCOUNT (USB2D0_BASE + 0x00000000) /* Number of bytes in OUT Endpoint FIFO. (Index register set to select Endpoints 13) */
+#endif
+
/******************************************************************************
* GPIO macro register defines
******************************************************************************/
@@ -2640,7 +3192,8 @@
#define GPIO0_IR (GPIO0_BASE+0x1C)
#endif /* CONFIG_440GP */
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
#define GPIO0_BASE (CFG_PERIPHERAL_BASE+0x00000B00)
#define GPIO1_BASE (CFG_PERIPHERAL_BASE+0x00000C00)
diff --git a/include/ppc4xx_enet.h b/include/ppc4xx_enet.h
index ec2e362..43c5ca4 100644
--- a/include/ppc4xx_enet.h
+++ b/include/ppc4xx_enet.h
@@ -145,12 +145,14 @@
#define EMAC_STACR_OC_MASK (0x00000000)
#endif
-#if defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+#if defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
#define SDR0_PFC1_EM_1000 (0x00200000)
#endif
/*ZMII Bridge Register addresses */
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
#define ZMII_BASE (CFG_PERIPHERAL_BASE + 0x0D00)
#else
#define ZMII_BASE (CFG_PERIPHERAL_BASE + 0x0780)
@@ -163,6 +165,7 @@
#define ZMII_MDI0 0x80000000
/* ZMII FER Register Bit Definitions */
+#define ZMII_FER_DIS (0x0)
#define ZMII_FER_MDI (0x8)
#define ZMII_FER_SMII (0x4)
#define ZMII_FER_RMII (0x2)
@@ -197,7 +200,11 @@
#define ZMII_SMIISR_V(__x) ((3 - __x) * 8)
/* RGMII Register Addresses */
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+#define RGMII_BASE (CFG_PERIPHERAL_BASE + 0x1000)
+#else
#define RGMII_BASE (CFG_PERIPHERAL_BASE + 0x0790)
+#endif
#define RGMII_FER (RGMII_BASE + 0x00)
#define RGMII_SSR (RGMII_BASE + 0x04)
@@ -216,7 +223,11 @@
#define RGMII_SSR_SP_100MBPS (0x02)
#define RGMII_SSR_SP_1000MBPS (0x04)
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+#define RGMII_SSR_V(__x) ((__x) * 8)
+#else
#define RGMII_SSR_V(__x) ((__x -2) * 8)
+#endif
/*---------------------------------------------------------------------------+
@@ -286,7 +297,8 @@
/* Ethernet MAC Regsiter Addresses */
#if defined(CONFIG_440)
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
#define EMAC_BASE (CFG_PERIPHERAL_BASE + 0x0E00)
#else
#define EMAC_BASE (CFG_PERIPHERAL_BASE + 0x0800)
@@ -332,7 +344,9 @@
#define EMAC_M0_WKE (0x04000000)
/* on 440GX EMAC_MR1 has a different layout! */
-#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+#if defined(CONFIG_440GX) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_440SP) || defined(CONFIG_440SPE)
/* MODE Reg 1 */
#define EMAC_M1_FDE (0x80000000)
#define EMAC_M1_ILE (0x40000000)
diff --git a/include/ppc_asm.tmpl b/include/ppc_asm.tmpl
index 72d690e..3e47e82 100644
--- a/include/ppc_asm.tmpl
+++ b/include/ppc_asm.tmpl
@@ -312,7 +312,7 @@
lwz r3,GOT(transfer_to_handler); \
mtlr r3; \
addi r3,r1,STACK_FRAME_OVERHEAD; \
- li r20,MSR_KERNEL; \
+ li r20,(MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)); \
rlwimi r20,r23,0,25,25; \
blrl ; \
.L_ ## label : \
diff --git a/include/serial.h b/include/serial.h
index 8c7b1c2..4880059 100644
--- a/include/serial.h
+++ b/include/serial.h
@@ -26,6 +26,13 @@
|| defined(CONFIG_405EP) || defined(CONFIG_MPC5xxx)
extern struct serial_device serial0_device;
extern struct serial_device serial1_device;
+#if defined(CFG_NS16550_SERIAL)
+extern struct serial_device eserial1_device;
+extern struct serial_device eserial2_device;
+extern struct serial_device eserial3_device;
+extern struct serial_device eserial4_device;
+#endif /* CFG_NS16550_SERIAL */
+
#endif
diff --git a/lib_arm/Makefile b/lib_arm/Makefile
index e56e06b..037c475 100644
--- a/lib_arm/Makefile
+++ b/lib_arm/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2002
+# (C) Copyright 2002-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,23 +23,24 @@
include $(TOPDIR)/config.mk
-LIB = lib$(ARCH).a
+LIB = $(obj)lib$(ARCH).a
-AOBJS = _ashldi3.o _ashrdi3.o _divsi3.o _modsi3.o _udivsi3.o _umodsi3.o
+SOBJS = _ashldi3.o _ashrdi3.o _divsi3.o _modsi3.o _udivsi3.o _umodsi3.o
COBJS = armlinux.o board.o \
cache.o div0.o
-OBJS = $(AOBJS) $(COBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(AOBJS:.o=.S) $(COBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(AOBJS:.o=.S) $(COBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/lib_blackfin/Makefile b/lib_blackfin/Makefile
index bc280d0..de7114b 100644
--- a/lib_blackfin/Makefile
+++ b/lib_blackfin/Makefile
@@ -3,7 +3,7 @@
#
# Copyright (c) 2005 blackfin.uclinux.org
#
-# (C) Copyright 2000-2004
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -27,21 +27,23 @@
include $(TOPDIR)/config.mk
-LIB = lib$(ARCH).a
+LIB = $(obj)lib$(ARCH).a
-AOBJS =
+SOBJS =
COBJS = board.o bf533_linux.o bf533_string.o cache.o muldi3.o
-OBJS = $(AOBJS) $(COBJS)
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(AOBJS:.o=.S) $(COBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(AOBJS:.o=.S) $(COBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/lib_generic/Makefile b/lib_generic/Makefile
index 18c41b1..f012cab 100644
--- a/lib_generic/Makefile
+++ b/lib_generic/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2002
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,21 +23,24 @@
include $(TOPDIR)/config.mk
-LIB = libgeneric.a
+LIB = $(obj)libgeneric.a
-OBJS = bzlib.o bzlib_crctable.o bzlib_decompress.o \
+COBJS = bzlib.o bzlib_crctable.o bzlib_decompress.o \
bzlib_randtable.o bzlib_huffman.o \
crc32.o ctype.o display_options.o ldiv.o \
string.o vsprintf.o zlib.o
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/lib_generic/crc32.c b/lib_generic/crc32.c
index 50ca4ffd..8283413 100644
--- a/lib_generic/crc32.c
+++ b/lib_generic/crc32.c
@@ -171,7 +171,9 @@
return crc ^ 0xffffffffL;
}
-#if (CONFIG_COMMANDS & CFG_CMD_JFFS2)
+#if (CONFIG_COMMANDS & CFG_CMD_JFFS2) \
+ || (CONFIG_COMMANDS & CFG_CMD_NAND) && !defined(CFG_NAND_LEGACY)
+
/* No ones complement version. JFFS2 (and other things ?)
* don't use ones compliment in their CRC calculations.
diff --git a/lib_i386/Makefile b/lib_i386/Makefile
index e5925e5..e344da5 100644
--- a/lib_i386/Makefile
+++ b/lib_i386/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2002
+# (C) Copyright 2002-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,23 +23,24 @@
include $(TOPDIR)/config.mk
-LIB = lib$(ARCH).a
+LIB = $(obj)lib$(ARCH).a
-AOBJS = bios.o bios_pci.o realmode_switch.o
+SOBJS = bios.o bios_pci.o realmode_switch.o
COBJS = board.o bios_setup.o i386_linux.o zimage.o realmode.o \
pci_type1.o pci.o video_bios.o video.o
-OBJS = $(AOBJS) $(COBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(AOBJS:.o=.S) $(COBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(AOBJS:.o=.S) $(COBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/lib_m68k/Makefile b/lib_m68k/Makefile
index 698da36..82165f0 100644
--- a/lib_m68k/Makefile
+++ b/lib_m68k/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,20 +23,23 @@
include $(TOPDIR)/config.mk
-LIB = lib$(ARCH).a
+LIB = $(obj)lib$(ARCH).a
-AOBJS =
+SOBJS =
+
COBJS = cache.o traps.o time.o board.o m68k_linux.o
-OBJS = $(AOBJS) $(COBJS)
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(AOBJS:.o=.S) $(COBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(AOBJS:.o=.S) $(COBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/lib_microblaze/Makefile b/lib_microblaze/Makefile
index ec01722f..82b7bea 100644
--- a/lib_microblaze/Makefile
+++ b/lib_microblaze/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2003-2004
+# (C) Copyright 2003-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,22 +23,23 @@
include $(TOPDIR)/config.mk
-LIB = lib$(ARCH).a
+LIB = $(obj)lib$(ARCH).a
-AOBJS =
+SOBJS =
COBJS = board.o microblaze_linux.o time.o cache.o
-OBJS = $(AOBJS) $(COBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(AOBJS:.o=.S) $(COBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(AOBJS:.o=.S) $(COBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/lib_mips/Makefile b/lib_mips/Makefile
index d5980e6..3163f00 100644
--- a/lib_mips/Makefile
+++ b/lib_mips/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2003
+# (C) Copyright 2003-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,22 +23,23 @@
include $(TOPDIR)/config.mk
-LIB = lib$(ARCH).a
+LIB = $(obj)lib$(ARCH).a
-AOBJS =
+SOBJS =
COBJS = board.o time.o mips_linux.o
-OBJS = $(AOBJS) $(COBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(AOBJS:.o=.S) $(COBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(AOBJS:.o=.S) $(COBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/lib_nios/Makefile b/lib_nios/Makefile
index eff46db..7c9d62c 100644
--- a/lib_nios/Makefile
+++ b/lib_nios/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,22 +23,23 @@
include $(TOPDIR)/config.mk
-LIB = lib$(ARCH).a
+LIB = $(obj)lib$(ARCH).a
-AOBJS =
+SOBJS =
COBJS = board.o cache.o divmod.o nios_linux.o mult.o time.o
-OBJS = $(AOBJS) $(COBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(AOBJS:.o=.S) $(COBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(AOBJS:.o=.S) $(COBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/lib_nios2/Makefile b/lib_nios2/Makefile
index 44b893c..1ff2f29 100644
--- a/lib_nios2/Makefile
+++ b/lib_nios2/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,22 +23,23 @@
include $(TOPDIR)/config.mk
-LIB = lib$(ARCH).a
+LIB = $(obj)lib$(ARCH).a
-AOBJS = cache.o
+SOBJS = cache.o
COBJS = board.o divmod.o nios_linux.o mult.o time.o
-OBJS = $(AOBJS) $(COBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(AOBJS:.o=.S) $(COBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(AOBJS:.o=.S) $(COBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/lib_ppc/Makefile b/lib_ppc/Makefile
index 652a419..2ba034f 100644
--- a/lib_ppc/Makefile
+++ b/lib_ppc/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,23 +23,24 @@
include $(TOPDIR)/config.mk
-LIB = lib$(ARCH).a
+LIB = $(obj)lib$(ARCH).a
-AOBJS = ppcstring.o ticks.o
+SOBJS = ppcstring.o ticks.o
COBJS = board.o \
bat_rw.o cache.o extable.o kgdb.o time.o interrupts.o
-OBJS = $(AOBJS) $(COBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(AOBJS:.o=.S) $(COBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(AOBJS:.o=.S) $(COBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/lib_ppc/board.c b/lib_ppc/board.c
index db80f77..cf0e3fd 100644
--- a/lib_ppc/board.c
+++ b/lib_ppc/board.c
@@ -763,6 +763,12 @@
spi_init_r ();
#endif
+#if (CONFIG_COMMANDS & CFG_CMD_NAND)
+ WATCHDOG_RESET ();
+ puts ("NAND: ");
+ nand_init(); /* go init the NAND */
+#endif
+
/* relocate environment function pointers etc. */
env_relocate ();
@@ -959,12 +965,6 @@
doc_init ();
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_NAND)
- WATCHDOG_RESET ();
- puts ("NAND: ");
- nand_init(); /* go init the NAND */
-#endif
-
#if (CONFIG_COMMANDS & CFG_CMD_NET)
#if defined(CONFIG_NET_MULTI)
WATCHDOG_RESET ();
diff --git a/mkconfig b/mkconfig
index 4fe6e44..c3e4cea 100755
--- a/mkconfig
+++ b/mkconfig
@@ -5,7 +5,7 @@
#
# Parameters: Target Architecture CPU Board [VENDOR] [SOC]
#
-# (C) 2002 DENX Software Engineering, Wolfgang Denk <wd@denx.de>
+# (C) 2002-2006 DENX Software Engineering, Wolfgang Denk <wd@denx.de>
#
APPEND=no # Default: Create new config file
@@ -27,24 +27,38 @@
echo "Configuring for ${BOARD_NAME} board..."
-cd ./include
-
#
# Create link to architecture specific headers
#
-rm -f asm
-ln -s asm-$2 asm
+if [ "$SRCTREE" != "$OBJTREE" ] ; then
+ mkdir -p ${OBJTREE}/include
+ mkdir -p ${OBJTREE}/include2
+ cd ${OBJTREE}/include2
+ rm -f asm
+ ln -s ${SRCTREE}/include/asm-$2 asm
+ LNPREFIX="../../include2/asm/"
+ cd ../include
+ rm -rf asm-$2
+ rm -f asm
+ mkdir asm-$2
+ ln -s asm-$2 asm
+else
+ cd ./include
+ rm -f asm
+ ln -s asm-$2 asm
+fi
+
rm -f asm-$2/arch
if [ -z "$6" -o "$6" = "NULL" ] ; then
- ln -s arch-$3 asm-$2/arch
+ ln -s ${LNPREFIX}arch-$3 asm-$2/arch
else
- ln -s arch-$6 asm-$2/arch
+ ln -s ${LNPREFIX}arch-$6 asm-$2/arch
fi
if [ "$2" = "arm" ] ; then
rm -f asm-$2/proc
- ln -s proc-armv asm-$2/proc
+ ln -s ${LNPREFIX}proc-armv asm-$2/proc
fi
#
diff --git a/nand_spl/board/amcc/sequoia/Makefile b/nand_spl/board/amcc/sequoia/Makefile
new file mode 100644
index 0000000..897aa8b
--- /dev/null
+++ b/nand_spl/board/amcc/sequoia/Makefile
@@ -0,0 +1,83 @@
+#
+# (C) Copyright 2006
+# Stefan Roese, DENX Software Engineering, sr@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+include board/$(BOARDDIR)/config.mk
+
+LDSCRIPT= board/$(BOARDDIR)/u-boot.lds
+LDFLAGS = -Bstatic -T $(LDSCRIPT) -Ttext $(TEXT_BASE) $(PLATFORM_LDFLAGS)
+AFLAGS += -DCONFIG_NAND_SPL
+CFLAGS += -DCONFIG_NAND_SPL
+
+SOBJS = start.o init.o resetvec.o
+COBJS = nand_boot.o ndfc.o sdram.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+
+ALL = u-boot-spl u-boot-spl.bin u-boot-spl-16k.bin
+
+all: $(obj).depend $(ALL)
+
+u-boot-spl-16k.bin: u-boot-spl
+ $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $< $@
+
+u-boot-spl.bin: u-boot-spl
+ $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
+
+u-boot-spl: $(OBJS)
+ $(LD) $(LDFLAGS) $$UNDEF_SYM $(OBJS) \
+ -Map u-boot-spl.map -o u-boot-spl
+
+# create symbolic links for common files
+
+# from cpu directory
+ndfc.c:
+ @rm -f ndfc.c
+ ln -s ../cpu/ppc4xx/ndfc.c ndfc.c
+
+resetvec.S:
+ @rm -f resetvec.S
+ ln -s ../cpu/ppc4xx/resetvec.S resetvec.S
+
+start.S:
+ @rm -f start.S
+ ln -s ../cpu/ppc4xx/start.S start.S
+
+# from board directory
+init.S:
+ @rm -f init.S
+ ln -s ../board/amcc/sequoia/init.S init.S
+
+sdram.c:
+ @rm -f sdram.c
+ ln -s ../board/amcc/sequoia/sdram.c sdram.c
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/nand_spl/board/amcc/sequoia/config.mk b/nand_spl/board/amcc/sequoia/config.mk
new file mode 100644
index 0000000..a29ba5f
--- /dev/null
+++ b/nand_spl/board/amcc/sequoia/config.mk
@@ -0,0 +1,49 @@
+#
+# (C) Copyright 2006
+# Stefan Roese, DENX Software Engineering, sr@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+#
+# AMCC 440EPx Reference Platform (Sequoia) board
+#
+
+#
+# TEXT_BASE for SPL:
+#
+# On 440EP(x) platforms the SPL is located at 0xfffff000...0xffffffff,
+# in the last 4kBytes of memory space in cache.
+# We will copy this SPL into internal SRAM in start.S. So we set
+# TEXT_BASE to starting address in internal SRAM here.
+#
+TEXT_BASE = 0xE0013000
+
+# PAD_TO used to generate a 16kByte binary needed for the combined image
+# -> PAD_TO = TEXT_BASE + 0x4000
+PAD_TO = 0xE0017000
+
+PLATFORM_CPPFLAGS += -DCONFIG_440=1
+
+ifeq ($(debug),1)
+PLATFORM_CPPFLAGS += -DDEBUG
+endif
+
+ifeq ($(dbcr),1)
+PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
+endif
diff --git a/nand_spl/board/amcc/sequoia/u-boot.lds b/nand_spl/board/amcc/sequoia/u-boot.lds
new file mode 100644
index 0000000..1563689
--- /dev/null
+++ b/nand_spl/board/amcc/sequoia/u-boot.lds
@@ -0,0 +1,65 @@
+/*
+ * (C) Copyright 2006
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc:common)
+SECTIONS
+{
+ .resetvec 0xE0013FFC :
+ {
+ *(.resetvec)
+ } = 0xffff
+
+ .text :
+ {
+ start.o (.text)
+ init.o (.text)
+ nand_boot.o (.text)
+ sdram.o (.text)
+ ndfc.o (.text)
+
+ *(.text)
+ *(.fixup)
+ }
+ _etext = .;
+
+ .data :
+ {
+ *(.rodata*)
+ *(.data*)
+ *(.sdata*)
+ __got2_start = .;
+ *(.got2)
+ __got2_end = .;
+ }
+
+ _edata = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss)
+ *(.bss)
+ }
+
+ _end = . ;
+}
diff --git a/nand_spl/nand_boot.c b/nand_spl/nand_boot.c
new file mode 100644
index 0000000..a136fb7
--- /dev/null
+++ b/nand_spl/nand_boot.c
@@ -0,0 +1,177 @@
+/*
+ * (C) Copyright 2006
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <nand.h>
+
+#define CFG_NAND_READ_DELAY \
+ { volatile int dummy; int i; for (i=0; i<10000; i++) dummy = i; }
+
+extern void board_nand_init(struct nand_chip *nand);
+extern void ndfc_hwcontrol(struct mtd_info *mtdinfo, int cmd);
+extern void ndfc_write_byte(struct mtd_info *mtdinfo, u_char byte);
+extern u_char ndfc_read_byte(struct mtd_info *mtdinfo);
+extern int ndfc_dev_ready(struct mtd_info *mtdinfo);
+extern int jump_to_ram(ulong delta);
+extern int jump_to_uboot(ulong addr);
+
+static int nand_is_bad_block(struct mtd_info *mtd, int block)
+{
+ struct nand_chip *this = mtd->priv;
+ int page_addr = block * CFG_NAND_PAGE_COUNT;
+
+ /* Begin command latch cycle */
+ this->hwcontrol(mtd, NAND_CTL_SETCLE);
+ this->write_byte(mtd, NAND_CMD_READOOB);
+ /* Set ALE and clear CLE to start address cycle */
+ this->hwcontrol(mtd, NAND_CTL_CLRCLE);
+ this->hwcontrol(mtd, NAND_CTL_SETALE);
+ /* Column address */
+ this->write_byte(mtd, CFG_NAND_BAD_BLOCK_POS); /* A[7:0] */
+ this->write_byte(mtd, (uchar)(page_addr & 0xff)); /* A[16:9] */
+ this->write_byte(mtd, (uchar)((page_addr >> 8) & 0xff)); /* A[24:17] */
+#ifdef CFG_NAND_4_ADDR_CYCLE
+ /* One more address cycle for devices > 32MiB */
+ this->write_byte(mtd, (uchar)((page_addr >> 16) & 0x0f)); /* A[xx:25] */
+#endif
+ /* Latch in address */
+ this->hwcontrol(mtd, NAND_CTL_CLRALE);
+
+ /*
+ * Wait a while for the data to be ready
+ */
+ if (this->dev_ready)
+ this->dev_ready(mtd);
+ else
+ CFG_NAND_READ_DELAY;
+
+ /*
+ * Read on byte
+ */
+ if (this->read_byte(mtd) != 0xff)
+ return 1;
+
+ return 0;
+}
+
+static int nand_read_page(struct mtd_info *mtd, int block, int page, uchar *dst)
+{
+ struct nand_chip *this = mtd->priv;
+ int page_addr = page + block * CFG_NAND_PAGE_COUNT;
+ int i;
+
+ /* Begin command latch cycle */
+ this->hwcontrol(mtd, NAND_CTL_SETCLE);
+ this->write_byte(mtd, NAND_CMD_READ0);
+ /* Set ALE and clear CLE to start address cycle */
+ this->hwcontrol(mtd, NAND_CTL_CLRCLE);
+ this->hwcontrol(mtd, NAND_CTL_SETALE);
+ /* Column address */
+ this->write_byte(mtd, 0); /* A[7:0] */
+ this->write_byte(mtd, (uchar)(page_addr & 0xff)); /* A[16:9] */
+ this->write_byte(mtd, (uchar)((page_addr >> 8) & 0xff)); /* A[24:17] */
+#ifdef CFG_NAND_4_ADDR_CYCLE
+ /* One more address cycle for devices > 32MiB */
+ this->write_byte(mtd, (uchar)((page_addr >> 16) & 0x0f)); /* A[xx:25] */
+#endif
+ /* Latch in address */
+ this->hwcontrol(mtd, NAND_CTL_CLRALE);
+
+ /*
+ * Wait a while for the data to be ready
+ */
+ if (this->dev_ready)
+ this->dev_ready(mtd);
+ else
+ CFG_NAND_READ_DELAY;
+
+ /*
+ * Read page into buffer
+ */
+ for (i=0; i<CFG_NAND_PAGE_SIZE; i++)
+ *dst++ = this->read_byte(mtd);
+
+ return 0;
+}
+
+static int nand_load(struct mtd_info *mtd, int offs, int uboot_size, uchar *dst)
+{
+ int block;
+ int blockcopy_count;
+ int page;
+
+ /*
+ * offs has to be aligned to a block address!
+ */
+ block = offs / CFG_NAND_BLOCK_SIZE;
+ blockcopy_count = 0;
+
+ while (blockcopy_count < (uboot_size / CFG_NAND_BLOCK_SIZE)) {
+ if (!nand_is_bad_block(mtd, block)) {
+ /*
+ * Skip bad blocks
+ */
+ for (page = 0; page < CFG_NAND_PAGE_COUNT; page++) {
+ nand_read_page(mtd, block, page, dst);
+ dst += CFG_NAND_PAGE_SIZE;
+ }
+
+ blockcopy_count++;
+ }
+
+ block++;
+ }
+
+ return 0;
+}
+
+void nand_boot(void)
+{
+ ulong mem_size;
+ struct nand_chip nand_chip;
+ nand_info_t nand_info;
+ int ret;
+ void (*uboot)(void);
+
+ /*
+ * Init sdram, so we have access to memory
+ */
+ mem_size = initdram(0);
+
+ /*
+ * Init board specific nand support
+ */
+ nand_info.priv = &nand_chip;
+ nand_chip.IO_ADDR_R = nand_chip.IO_ADDR_W = (void __iomem *)CFG_NAND_BASE;
+ nand_chip.dev_ready = NULL; /* preset to NULL */
+ board_nand_init(&nand_chip);
+
+ /*
+ * Load U-Boot image from NAND into RAM
+ */
+ ret = nand_load(&nand_info, CFG_NAND_U_BOOT_OFFS, CFG_NAND_U_BOOT_SIZE,
+ (uchar *)CFG_NAND_U_BOOT_DST);
+
+ /*
+ * Jump to U-Boot image
+ */
+ uboot = (void (*)(void))CFG_NAND_U_BOOT_START;
+ (*uboot)();
+}
diff --git a/net/Makefile b/net/Makefile
index 7a70489..d18460c 100644
--- a/net/Makefile
+++ b/net/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -25,19 +25,23 @@
# CFLAGS += -DET_DEBUG -DDEBUG
-LIB = libnet.a
+LIB = $(obj)libnet.a
-OBJS = net.o tftp.o bootp.o rarp.o eth.o nfs.o sntp.o
+COBJS = net.o tftp.o bootp.o rarp.o eth.o nfs.o sntp.o
+
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+
all: $(LIB)
-$(LIB): $(START) $(OBJS)
- $(AR) crv $@ $(OBJS)
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/net/bootp.c b/net/bootp.c
index 669d74a..8f1382e 100644
--- a/net/bootp.c
+++ b/net/bootp.c
@@ -851,7 +851,12 @@
NetCopyIP(&bp->bp_ciaddr, &bp_offer->bp_ciaddr); /* both in network byte order */
NetCopyIP(&bp->bp_yiaddr, &bp_offer->bp_yiaddr);
NetCopyIP(&bp->bp_siaddr, &bp_offer->bp_siaddr);
- NetCopyIP(&bp->bp_giaddr, &bp_offer->bp_giaddr);
+ /*
+ * RFC3046 requires Relay Agents to discard packets with
+ * nonzero and offered giaddr
+ */
+ NetWriteIP(&bp->bp_giaddr, 0);
+
memcpy (bp->bp_chaddr, NetOurEther, 6);
/*
diff --git a/post/Makefile b/post/Makefile
index 4ee429d..228bafc 100644
--- a/post/Makefile
+++ b/post/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2002
+# (C) Copyright 2002-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
diff --git a/post/cpu/Makefile b/post/cpu/Makefile
index 43fc044..645e838 100644
--- a/post/cpu/Makefile
+++ b/post/cpu/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2002
+# (C) Copyright 2002-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
diff --git a/post/rules.mk b/post/rules.mk
index 1ad6959..e2c73c6 100644
--- a/post/rules.mk
+++ b/post/rules.mk
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2002
+# (C) Copyright 2002-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,20 +23,22 @@
include $(TOPDIR)/config.mk
-OBJS = $(AOBJS) $(COBJS)
+SRCS := $(AOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(AOBJS) $(COBJS))
+LIB := $(obj)$(LIB)
CPPFLAGS += -I$(TOPDIR)
all: $(LIB)
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(AOBJS:.o=.S) $(COBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(AOBJS:.o=.S) $(COBJS:.o=.c) > .depend
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/rtc/Makefile b/rtc/Makefile
index 2c5d099..cf2b24e 100644
--- a/rtc/Makefile
+++ b/rtc/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001-2004
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -25,24 +25,27 @@
#CFLAGS += -DDEBUG
-LIB = librtc.a
+LIB = $(obj)librtc.a
-OBJS = date.o \
+COBJS = date.o \
bf533_rtc.o ds12887.o ds1302.o ds1306.o ds1307.o \
ds1337.o ds1374.o ds1556.o ds164x.o ds174x.o \
m41t11.o max6900.o m48t35ax.o mc146818.o mk48t59.o \
mpc5xxx.o mpc8xx.o pcf8563.o s3c24x0_rtc.o rs5c372.o
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+
all: $(LIB)
-$(LIB): $(START) $(OBJS)
- $(AR) crv $@ $(OBJS)
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
-.depend: Makefile $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/rules.mk b/rules.mk
new file mode 100644
index 0000000..a77451b
--- /dev/null
+++ b/rules.mk
@@ -0,0 +1,35 @@
+#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#########################################################################
+
+_depend: $(obj).depend
+
+$(obj).depend: $(src)Makefile $(TOPDIR)/config.mk $(SRCS)
+ @rm -f $@
+ @for f in $(SRCS); do \
+ g=`basename $$f | sed -e 's/\(.*\)\.\w/\1.o/'`; \
+ $(CC) -M $(HOST_CFLAGS) $(CPPFLAGS) -MQ $(obj)$$g $$f >> $@ ; \
+ done
+
+#########################################################################
diff --git a/tools/Makefile b/tools/Makefile
index d3dcc7d..6177f90 100644
--- a/tools/Makefile
+++ b/tools/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2003
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -21,22 +21,23 @@
# MA 02111-1307 USA
#
-BINS = img2srec$(SFX) mkimage$(SFX) envcrc$(SFX) gen_eth_addr$(SFX) bmp_logo$(SFX)
+BIN_FILES = img2srec$(SFX) mkimage$(SFX) envcrc$(SFX) gen_eth_addr$(SFX) bmp_logo$(SFX)
-OBJS = environment.o img2srec.o mkimage.o crc32.o envcrc.o gen_eth_addr.o bmp_logo.o
+OBJ_LINKS = environment.o crc32.o
+OBJ_FILES = img2srec.o mkimage.o envcrc.o gen_eth_addr.o bmp_logo.o
ifeq ($(ARCH),mips)
-BINS += inca-swap-bytes$(SFX)
-OBJS += inca-swap-bytes.o
+BIN_FILES += inca-swap-bytes$(SFX)
+OBJ_FILES += inca-swap-bytes.o
endif
# Don't build by default
#ifeq ($(ARCH),ppc)
-#BINS += mpc86x_clk$(SFX)
-#OBJS += mpc86x_clk.o
+#BIN_FILES += mpc86x_clk$(SFX)
+#OBJ_FILES += mpc86x_clk.o
#endif
-LOGO_H = $(TOPDIR)/include/bmp_logo.h
+LOGO_H = $(OBJTREE)/include/bmp_logo.h
ifeq ($(LOGO_BMP),)
LOGO_BMP= logos/denx.bmp
@@ -106,69 +107,76 @@
#
include $(TOPDIR)/config.mk
+# now $(obj) is defined
+SRCS := $(addprefix $(obj),$(OBJ_LINKS:.o=.c)) $(OBJ_FILES:.o=.c)
+BINS := $(addprefix $(obj),$(BIN_FILES))
+
#
# Use native tools and options
#
-CPPFLAGS = -idirafter ../include -DTEXT_BASE=$(TEXT_BASE) -DUSE_HOSTCC
+CPPFLAGS = -idirafter $(SRCTREE)/include \
+ -idirafter $(OBJTREE)/include2 \
+ -idirafter $(OBJTREE)/include \
+ -DTEXT_BASE=$(TEXT_BASE) -DUSE_HOSTCC
CFLAGS = $(HOST_CFLAGS) $(CPPFLAGS) -O
AFLAGS = -D__ASSEMBLY__ $(CPPFLAGS)
CC = $(HOSTCC)
STRIP = $(HOSTSTRIP)
MAKEDEPEND = makedepend
-all: .depend $(BINS) $(LOGO_H) subdirs
+all: $(obj).depend $(BINS) $(LOGO_H) subdirs
-envcrc$(SFX): envcrc.o crc32.o environment.o
+$(obj)envcrc$(SFX): $(obj)envcrc.o $(obj)crc32.o $(obj)environment.o
$(CC) $(CFLAGS) -o $@ $^
-img2srec$(SFX): img2srec.o
+$(obj)img2srec$(SFX): $(obj)img2srec.o
$(CC) $(CFLAGS) $(HOST_LDFLAGS) -o $@ $^
$(STRIP) $@
-mkimage$(SFX): mkimage.o crc32.o
+$(obj)mkimage$(SFX): $(obj)mkimage.o $(obj)crc32.o
$(CC) $(CFLAGS) $(HOST_LDFLAGS) -o $@ $^
$(STRIP) $@
-ncb$(SFX): ncb.o
+$(obj)ncb$(SFX): $(obj)ncb.o
$(CC) $(CFLAGS) $(HOST_LDFLAGS) -o $@ $^
$(STRIP) $@
-gen_eth_addr$(SFX): gen_eth_addr.o
+$(obj)gen_eth_addr$(SFX): $(obj)gen_eth_addr.o
$(CC) $(CFLAGS) $(HOST_LDFLAGS) -o $@ $^
$(STRIP) $@
-bmp_logo$(SFX): bmp_logo.o
+$(obj)bmp_logo$(SFX): $(obj)bmp_logo.o
$(CC) $(CFLAGS) $(HOST_LDFLAGS) -o $@ $^
$(STRIP) $@
-inca-swap-bytes$(SFX): inca-swap-bytes.o
+$(obj)inca-swap-bytes$(SFX): $(obj)inca-swap-bytes.o
$(CC) $(CFLAGS) $(HOST_LDFLAGS) -o $@ $^
$(STRIP) $@
-mpc86x_clk$(SFX): mpc86x_clk.o
+$(obj)mpc86x_clk$(SFX): $(obj)mpc86x_clk.o
$(CC) $(CFLAGS) $(HOST_LDFLAGS) -o $@ $^
$(STRIP) $@
-envcrc.o: envcrc.c
- $(CC) -g $(CFLAGS) -c $<
+$(obj)envcrc.o: $(src)envcrc.c
+ $(CC) -g $(CFLAGS) -c -o $@ $<
-crc32.o: crc32.c
- $(CC) -g $(CFLAGS) -c $<
+$(obj)crc32.o: $(obj)crc32.c
+ $(CC) -g $(CFLAGS) -c -o $@ $<
-mkimage.o: mkimage.c
- $(CC) -g $(CFLAGS) -c $<
+$(obj)mkimage.o: $(src)mkimage.c
+ $(CC) -g $(CFLAGS) -c -o $@ $<
-ncb.o: ncb.c
- $(CC) -g $(CFLAGS) -c $<
+$(obj)ncb.o: $(src)ncb.c
+ $(CC) -g $(CFLAGS) -c -o $@ $<
-gen_eth_addr.o: gen_eth_addr.c
- $(CC) -g $(CFLAGS) -c $<
+$(obj)gen_eth_addr.o: $(src)gen_eth_addr.c
+ $(CC) -g $(CFLAGS) -c -o $@ $<
-inca-swap-bytes.o: inca-swap-bytes.c
- $(CC) -g $(CFLAGS) -c $<
+$(obj)inca-swap-bytes.o: $(src)inca-swap-bytes.c
+ $(CC) -g $(CFLAGS) -c -o $@ $<
-mpc86x_clk.o: mpc86x_clk.c
- $(CC) -g $(CFLAGS) -c $<
+$(obj)mpc86x_clk.o: $(src)mpc86x_clk.c
+ $(CC) -g $(CFLAGS) -c -o $@ $<
subdirs:
ifeq ($(TOOLSUBDIRS),)
@@ -184,25 +192,25 @@
done
endif
-environment.c:
- @rm -f environment.c
- ln -s ../common/environment.c environment.c
+$(obj)environment.c:
+ @rm -f $(obj)environment.c
+ ln -s $(src)../common/environment.c $(obj)environment.c
-environment.o: environment.c
- $(CC) -g $(HOST_ENVIRO_CFLAGS) $(CPPFLAGS) -c $<
+$(obj)environment.o: $(obj)environment.c
+ $(CC) -g $(HOST_ENVIRO_CFLAGS) $(CPPFLAGS) -c -o $@ $<
-crc32.c:
- @rm -f crc32.c
- ln -s ../lib_generic/crc32.c crc32.c
+$(obj)crc32.c:
+ @rm -f $(obj)crc32.c
+ ln -s $(src)../lib_generic/crc32.c $(obj)crc32.c
-$(LOGO_H): bmp_logo $(LOGO_BMP)
- ./bmp_logo $(LOGO_BMP) >$@
+$(LOGO_H): $(obj)bmp_logo $(LOGO_BMP)
+ $(obj)./bmp_logo $(LOGO_BMP) >$@
#########################################################################
-.depend: Makefile $(OBJS:.o=.c)
- $(CC) -M $(HOST_CFLAGS) $(CPPFLAGS) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/tools/easylogo/easylogo.c b/tools/easylogo/easylogo.c
index cbec70b..9f1d1ff 100644
--- a/tools/easylogo/easylogo.c
+++ b/tools/easylogo/easylogo.c
@@ -265,7 +265,7 @@
return -1 ;
/* Author information */
- fprintf(file, "/*\n * Generated by EasyLogo, (C) 2000 by Paolo Scaffardi\n/*\n"); */
+ fprintf(file, "/*\n * Generated by EasyLogo, (C) 2000 by Paolo Scaffardi\n *\n");
fprintf(file, " * To use this, include it and call: easylogo_plot(screen,&%s, width,x,y)\n *\n", varname);
fprintf(file, " * Where:\t'screen'\tis the pointer to the frame buffer\n");
fprintf(file, " *\t\t'width'\tis the screen width\n");
diff --git a/tools/env/Makefile b/tools/env/Makefile
index 9ce477c..1f16768 100644
--- a/tools/env/Makefile
+++ b/tools/env/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2002
+# (C) Copyright 2002-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -21,25 +21,28 @@
# MA 02111-1307 USA
#
-SOURCES := crc32.c fw_env.c fw_env_main.c
-HEADERS := fw_env.h
+include $(TOPDIR)/config.mk
-all: fw_printenv
+SRCS := $(obj)crc32.c fw_env.c fw_env_main.c
+HEADERS := fw_env.h
-fw_printenv: $(SOURCES) $(HEADERS)
- $(CROSS_COMPILE)gcc -Wall -DUSE_HOSTCC $(SOURCES) -o fw_printenv
+CPPFLAGS := -Wall -DUSE_HOSTCC
+
+all: $(obj)fw_printenv
+
+$(obj)fw_printenv: $(SRCS) $(HEADERS)
+ $(CROSS_COMPILE)gcc $(CPPFLAGS) $(SRCS) -o $(obj)fw_printenv
clean:
- rm -f fw_printenv crc32.c
+ rm -f $(obj)fw_printenv $(obj)crc32.c
-crc32.c:
- ln -s ../../lib_generic/crc32.c crc32.c
+$(obj)crc32.c:
+ ln -s $(src)../../lib_generic/crc32.c $(obj)crc32.c
#########################################################################
-.depend: Makefile $(SOURCES)
- $(CC) -M $(HOST_CFLAGS) $(CPPFLAGS) -DUSE_HOSTCC $(SOURCES) > $@
+include $(TOPDIR)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/tools/gdb/Makefile b/tools/gdb/Makefile
index e7618b7..632103d 100644
--- a/tools/gdb/Makefile
+++ b/tools/gdb/Makefile
@@ -1,4 +1,7 @@
#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
# (C) Copyright 2000
# Murray Jensen <Murray.Jensen@csiro.au>
#
@@ -25,7 +28,11 @@
BINS = gdbsend gdbcont
-OBJS = gdbsend.o gdbcont.o error.o remote.o serial.o
+COBJS = gdbsend.o gdbcont.o error.o remote.o serial.o
+
+OBJS := $(addprefix $(obj),$(COBJS))
+SRCS := $(COBJS:.o=.c)
+BINS := $(addprefix $(obj),$(BINS))
#
# Use native tools and options
@@ -44,26 +51,26 @@
else # ! CYGWIN
-all: $(BINS)
+all: $(obj).depend $(BINS)
-gdbsend: gdbsend.o error.o remote.o serial.o
+$(obj)gdbsend: $(obj)gdbsend.o $(obj)error.o $(obj)remote.o $(obj)serial.o
$(CC) $(CFLAGS) $(HOST_LDFLAGS) -o $@ $^
-gdbcont: gdbcont.o error.o remote.o serial.o
+$(obj)gdbcont: $(obj)gdbcont.o $(obj)error.o $(obj)remote.o $(obj)serial.o
$(CC) $(CFLAGS) $(HOST_LDFLAGS) -o $@ $^
clean:
rm -f $(OBJS)
distclean: clean
- rm -f $(BINS) core *.bak .depend
+ rm -f $(BINS) $(obj)core $(obj)*.bak $(obj).depend
#########################################################################
-.depend: Makefile $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) -I../include $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/tools/mkimage.c b/tools/mkimage.c
index d6000e0..416e658 100644
--- a/tools/mkimage.c
+++ b/tools/mkimage.c
@@ -94,6 +94,7 @@
{ IH_CPU_SPARC, "sparc", "SPARC", },
{ IH_CPU_SPARC64, "sparc64", "SPARC 64 Bit", },
{ IH_CPU_BLACKFIN, "blackfin", "Blackfin", },
+ { IH_CPU_AVR32, "avr32", "AVR32", },
{ -1, "", "", },
};
@@ -633,7 +634,7 @@
if (hdr->ih_type == IH_TYPE_MULTI || hdr->ih_type == IH_TYPE_SCRIPT) {
int i, ptrs;
uint32_t pos;
- unsigned long *len_ptr = (unsigned long *) (
+ uint32_t *len_ptr = (uint32_t *) (
(unsigned long)hdr + sizeof(image_header_t)
);
diff --git a/tools/updater/Makefile b/tools/updater/Makefile
index 3fa1912..e9684cb4 100644
--- a/tools/updater/Makefile
+++ b/tools/updater/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -25,62 +25,81 @@
include $(TOPDIR)/config.mk
-PROG = updater
-IMAGE = updater.image
-SRC = update.c flash.c flash_hw.c utils.c cmd_flash.c string.c ctype.c dummy.c
-ASRC = ppcstring.S
-OBJS = $(SRC:.c=.o) $(ASRC:.S=.o)
+PROG = $(obj)updater
+IMAGE = $(obj)updater.image
-LIB = $(TOPDIR)/examples/libstubs.a
-LIBAOBJS=
-LIBCOBJS= $(TOPDIR)/examples/stubs.o
-LIBOBJS = $(LIBAOBJS) $(LIBCOBJS)
+COBJS = update.o flash.o flash_hw.o utils.o cmd_flash.o string.o ctype.o dummy.o
+COBJS_LINKS = stubs.o
+AOBJS = ppcstring.o
+AOBJS_LINKS = memio.o
+
+OBJS := $(addprefix $(obj),$(COBJS) $(COBJS_LINKS) $(AOBJS) $(AOBJS_LINKS))
+SRCS := $(COBJS:.o=.c) $(AOBJS:.o=.S) $(addprefix $(obj), $(COBJS_LINKS:.o:.c) $(AOBJS_LINKS:.o:.S))
CPPFLAGS += -I$(TOPDIR) -I$(TOPDIR)/board/MAI/AmigaOneG3SE
CFLAGS += -I$(TOPDIR)/board/MAI/AmigaOneG3SE
+AFLAGS += -I$(TOPDIR)/board/MAI/AmigaOneG3SE
+
+DEPS = $(OBJTREE)/u-boot.bin $(OBJTREE)/tools/mkimage
+ifneq ($(DEPS),$(wildcard $(DEPS)))
+$(error "updater: Missing required objects, please run regular build first")
+endif
-all: .depend $(LIB) $(PROG)
+all: $(obj).depend $(PROG) $(IMAGE)
#########################################################################
-$(LIB): .depend $(LIBOBJS)
- $(AR) crv $@ $(LIBOBJS)
-%.srec: %.o $(LIB)
+$(obj)%.srec: %.o $(LIB)
$(LD) -g -Ttext $(LOAD_ADDR) -o $(<:.o=) -e $(<:.o=) $< $(LIB)
$(OBJCOPY) -O srec $(<:.o=) $@
+$(obj)%.o: %.c
+ $(CC) $(CFLAGS) -c -o $@ $<
+
+$(obj)%.o: %.S
+ $(CC) $(AFLAGS) -c -o $@ $<
+
-%.o: %.c
- $(CC) $(CPPFLAGS) -c $<
+$(obj)memio.o: $(obj)memio.S
+ $(CC) $(AFLAGS) -c -o $@ $<
-%.o: %.S
- $(CC) $(CPPFLAGS) -c $<
+$(obj)memio.S:
+ rm -f $(obj)memio.c
+ ln -s $(SRCTREE)/board/MAI/AmigaOneG3SE/memio.S $(obj)memio.S
+
+$(obj)stubs.o: $(obj)stubs.c
+ $(CC) $(CFLAGS) -c -o $@ $<
+
+$(obj)stubs.c:
+ rm -f $(obj)stubs.c
+ ln -s $(SRCTREE)/examples/stubs.c $(obj)stubs.c
#########################################################################
-updater: $(OBJS) $(LIB) $(TOPDIR)/board/MAI/AmigaOneG3SE/memio.o
- $(LD) -g -Ttext $(LOAD_ADDR) -o updater -e _main $(OBJS) $(LIB) \
- $(TOPDIR)/board/MAI/AmigaOneG3SE/memio.o
- $(OBJCOPY) -O binary updater updater.bin
+$(obj)updater: $(OBJS)
+ $(LD) -g -Ttext $(LOAD_ADDR) -o $(obj)updater -e _main $(OBJS)
+ $(OBJCOPY) -O binary $(obj)updater $(obj)updater.bin
-updater.image: updater $(TOPDIR)/u-boot.bin
- cat >/tmp/tempimage updater.bin junk $(TOPDIR)/u-boot.bin
- $(TOPDIR)/tools/mkimage -A ppc -O u-boot -T standalone -C none -a $(LOAD_ADDR) \
- -e `ppc-elf32-nm updater | grep _main | cut --bytes=0-8` \
- -n "Firmware Updater" -d /tmp/tempimage updater.image
+$(obj)updater.image: $(obj)updater $(OBJTREE)/u-boot.bin
+ cat >/tmp/tempimage $(obj)updater.bin junk $(OBJTREE)/u-boot.bin
+ $(OBJTREE)/tools/mkimage -A ppc -O u-boot -T standalone -C none -a $(LOAD_ADDR) \
+ -e `$(NM) $(obj)updater | grep _main | cut --bytes=0-8` \
+ -n "Firmware Updater" -d /tmp/tempimage $(obj)updater.image
rm /tmp/tempimage
- cp updater.image /tftpboot
+ cp $(obj)updater.image /tftpboot
-updater.image2: updater $(TOPDIR)/u-boot.bin
- cat >/tmp/tempimage updater.bin junk ../../create_image/image
- $(TOPDIR)/tools/mkimage -A ppc -O u-boot -T standalone -C none -a $(LOAD_ADDR) \
- -e `ppc-elf32-nm updater | grep _main | cut --bytes=0-8` \
- -n "Firmware Updater" -d /tmp/tempimage updater.image
+(obj)updater.image2: $(obj)updater $(OBJTREE)/u-boot.bin
+ cat >/tmp/tempimage $(obj)updater.bin junk ../../create_image/image
+ $(OBJTREE)/tools/mkimage -A ppc -O u-boot -T standalone -C none -a $(LOAD_ADDR) \
+ -e `$(NM) $(obj)updater | grep _main | cut --bytes=0-8` \
+ -n "Firmware Updater" -d /tmp/tempimage $(obj)updater.image
rm /tmp/tempimage
- cp updater.image /tftpboot
+ cp $(obj)updater.image /tftpboot
-.depend: Makefile $(SRC) $(ASRC) $(LIBCOBJS:.o=.c) $(LIBAOBJS:.o=.S)
- $(CC) -M $(CFLAGS) $(SRC) $(ASRC) $(LIBCOBJS:.o=.c) $(LIBAOBJS:.o=.S) > $@
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/tools/updater/flash.c b/tools/updater/flash.c
index 32a1767..1ed77b1 100644
--- a/tools/updater/flash.c
+++ b/tools/updater/flash.c
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2000
+ * (C) Copyright 2000-2006
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
@@ -124,7 +124,7 @@
* (only some targets require alignment)
*/
int
-flash_write (uchar *src, ulong addr, ulong cnt)
+flash_write (char *src, ulong addr, ulong cnt)
{
#ifdef CONFIG_SPD823TS
return (ERR_TIMOUT); /* any other error codes are possible as well */
diff --git a/tools/updater/update.c b/tools/updater/update.c
index b6d50d5..18f122a 100644
--- a/tools/updater/update.c
+++ b/tools/updater/update.c
@@ -46,10 +46,6 @@
while (1);
}
-int flash_sect_protect (int p, ulong addr_first, ulong addr_last);
-int flash_sect_erase (ulong addr_first, ulong addr_last);
-int flash_write (uchar *src, ulong addr, ulong cnt);
-
void do_updater(void)
{
unsigned long *addr = &__dummy + 65;