* Code cleanup:
- remove trailing white space, trailing empty lines, C++ comments, etc.
- split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c)
* Patches by Kenneth Johansson, 25 Jun 2003:
- major rework of command structure
(work done mostly by Michal Cendrowski and Joakim Kristiansen)
diff --git a/board/bmw/Makefile b/board/bmw/Makefile
index 46fe791..621640b 100644
--- a/board/bmw/Makefile
+++ b/board/bmw/Makefile
@@ -31,7 +31,7 @@
SOBJS = early_init.o
$(LIB): .depend $(OBJS) $(SOBJS)
- $(AR) crv $@ $^
+ $(AR) crv $@ $(OBJS) $(SOBJS)
#########################################################################
diff --git a/board/bmw/README b/board/bmw/README
index 55ef56e..70bc813 100644
--- a/board/bmw/README
+++ b/board/bmw/README
@@ -20,39 +20,39 @@
onboard the processor module are listed briefly below:
0x00000000 - 0x40000000 - 64MB SDRAM SIMM
- (Unregistered PC-100 SDRAM DIMM Module)
+ (Unregistered PC-100 SDRAM DIMM Module)
0xFF000000 - 0xFF001FFF - M-Systems DiskOnChip (TM) 2000
- TSOP 16MB (MD2211-D16-V3)
+ TSOP 16MB (MD2211-D16-V3)
0x70000000 - 0x70001FFF - M-Systems DiskOnChip (TM) 2000
- DIP32 (Socketed 16MB - 1GB ) *
- NOTE: this is not populated on all systems.
+ DIP32 (Socketed 16MB - 1GB ) *
+ NOTE: this is not populated on all systems.
0x7c000000 - 0x7c000000 - Reset Register
- (Write 0 to reset)
+ (Write 0 to reset)
0x7c000001 - 0x7c000001 - System LED
- (Clear Bit 7 to turn on, set to shut off)
+ (Clear Bit 7 to turn on, set to shut off)
0x7c000002 - 0x7c000002 - M48T59 Watchdog IRQ3
- (Clear bit 7 to reset, set to assert IRQ3)
+ (Clear bit 7 to reset, set to assert IRQ3)
0x7c000003 - 0x7c000003 - M48T59 Write-Protect Register
- (Clear bit 7 to make R/W, set to make R/O)
+ (Clear bit 7 to make R/W, set to make R/O)
0x7c002000 - 0x7c002003 - Infineon OSRAM DLR2416 4 Character
- 5x7 Dot Matrix Alphanumeric Display
- (Each byte sets the appropriate character)
+ 5x7 Dot Matrix Alphanumeric Display
+ (Each byte sets the appropriate character)
0x7c004000 - 0x7c005FF0 - SGS-THOMSON M48T59Y 8K NVRAM/RTC
- NVRAM Memory Region
+ NVRAM Memory Region
0x7c005FF0 - 0x7c005FFF - SGS-THOMSON M48T59Y 8K NVRAM/RTC
- Realtime Clock Registers
+ Realtime Clock Registers
0xFFF00000 - 0xFFF80000 - 512K PLCC32 BootRom
- (AMD AM29F040, ST 29W040B)
+ (AMD AM29F040, ST 29W040B)
0xFFF00100 - System Reset Vector
@@ -131,7 +131,6 @@
- DOC Support - (underway)
-
U-Boot 1.2.0 (Aug 6 2002 - 17:44:48)
CPU: MPC8245 Revision 16.20 at 264 MHz: 16 kB I-Cache 16 kB D-Cache
@@ -167,15 +166,10 @@
=>boot
-
-
-
-
-
DevTools
========
ELDK
- DENX Embedded Linux Development Kit
+ DENX Embedded Linux Development Kit
ROM Emulator
Grammar Engine PROMICE P1160-90-AI21E (2MBx8bit, 90ns access time)
@@ -187,7 +181,6 @@
WRS/EST VisionICE-II (PPC8240)
-
=>reset
@@ -216,8 +209,8 @@
Filename 'vmlinux.img'.
Load address: 0x100000
Loading: #################################################################
- ####################################T #############################
- ######################
+ ####################################T #############################
+ ######################
done
Bytes transferred = 777199 (bdbef hex)
@@ -317,7 +310,6 @@
MPC8245/BMW
-
switch-2 login: root
Password:
PAM_unix[49]: (login) session opened for user root by LOGIN(uid=0)
@@ -328,7 +320,6 @@
MPC8245/BMW
-
login[49]: ROOT LOGIN on `console'
root@switch-2:~# cat /proc/cpuinfo
diff --git a/board/bmw/bmw.c b/board/bmw/bmw.c
index 2685662..f2d33fc 100644
--- a/board/bmw/bmw.c
+++ b/board/bmw/bmw.c
@@ -94,9 +94,6 @@
}
-
-
-
/*
* Initialize PCI Devices, report devices found.
*/
diff --git a/board/bmw/bmw.h b/board/bmw/bmw.h
index 6b7571c..dd97569 100644
--- a/board/bmw/bmw.h
+++ b/board/bmw/bmw.h
@@ -46,13 +46,13 @@
#define LED_REG_BASE (XROM_BASE_ADDR | 0x2000)
#define TOD_BASE (XROM_BASE_ADDR | 0x4000)
#define LED_REG(x) (*(volatile unsigned char *) \
- (LED_REG_BASE + (x)))
+ (LED_REG_BASE + (x)))
#define XROM_DEV_SIZE 0x00006000
#define ENET_DEV_BASE 0x80000000
#define PLD_REG(off) (*(volatile unsigned char *)\
- (PLD_REG_BASE + (off)))
+ (PLD_REG_BASE + (off)))
#define PLD_REVID_B1 0x7f /* Fix me */
#define PLD_REVID_B2 0x01 /* Fix me */
diff --git a/board/bmw/config.mk b/board/bmw/config.mk
index 7facadf..f991549 100644
--- a/board/bmw/config.mk
+++ b/board/bmw/config.mk
@@ -28,5 +28,5 @@
TEXT_BASE = 0xFFF00000
# NOTE: The flags below affect how the BCM570x driver is compiled
PLATFORM_CPPFLAGS += -DEMBEDDED -DBIG_ENDIAN_HOST -DINCLUDE_5701_AX_FIX=1\
- -DDBG=0 -DT3_JUMBO_RCV_RCB_ENTRY_COUNT=256\
- -DTEXT_BASE=$(TEXT_BASE)
+ -DDBG=0 -DT3_JUMBO_RCV_RCB_ENTRY_COUNT=256\
+ -DTEXT_BASE=$(TEXT_BASE)
diff --git a/board/bmw/early_init.S b/board/bmw/early_init.S
index ec20a67..e6400c3 100644
--- a/board/bmw/early_init.S
+++ b/board/bmw/early_init.S
@@ -16,7 +16,7 @@
.global iommu_setup
/* Initialize IO/MMU mappings via BAT method Ch. 7,
* PPC Programming Reference
- */
+ */
iommu_setup:
/* initialize the BAT registers (SPRs 528 - 543 */
@@ -64,7 +64,7 @@
BAT marked valid that is in an unknown or transient state
*/
- addis r5,0,0x0000
+ addis r5,0,0x0000
mtibat0u(r5)
mtibat0l(r5)
mtibat1u(r5)
@@ -81,106 +81,106 @@
mtdbat2l(r5)
mtdbat3u(r5)
mtdbat3l(r5)
- isync
+ isync
/*
* Set up I/D BAT0
*/
- lis r4, CFG_DBAT0L@h
- ori r4, r4, CFG_DBAT0L@l
- lis r3, CFG_DBAT0U@h
- ori r3, r3, CFG_DBAT0U@l
+ lis r4, CFG_DBAT0L@h
+ ori r4, r4, CFG_DBAT0L@l
+ lis r3, CFG_DBAT0U@h
+ ori r3, r3, CFG_DBAT0U@l
- mtdbat0l(r4)
- isync
- mtdbat0u(r3)
- isync
- sync
+ mtdbat0l(r4)
+ isync
+ mtdbat0u(r3)
+ isync
+ sync
- lis r4, CFG_IBAT0L@h
- ori r4, r4, CFG_IBAT0L@l
- lis r3, CFG_IBAT0U@h
- ori r3, r3, CFG_IBAT0U@l
+ lis r4, CFG_IBAT0L@h
+ ori r4, r4, CFG_IBAT0L@l
+ lis r3, CFG_IBAT0U@h
+ ori r3, r3, CFG_IBAT0U@l
- isync
- mtibat0l(r4)
- isync
+ isync
+ mtibat0l(r4)
+ isync
mtibat0u(r3)
- isync
+ isync
/*
* Set up I/D BAT1
*/
- lis r4, CFG_IBAT1L@h
- ori r4, r4, CFG_IBAT1L@l
- lis r3, CFG_IBAT1U@h
- ori r3, r3, CFG_IBAT1U@l
+ lis r4, CFG_IBAT1L@h
+ ori r4, r4, CFG_IBAT1L@l
+ lis r3, CFG_IBAT1U@h
+ ori r3, r3, CFG_IBAT1U@l
- isync
- mtibat1l(r4)
- isync
- mtibat1u(r3)
- isync
- mtdbat1l(r4)
- isync
- mtdbat1u(r3)
- isync
- sync
+ isync
+ mtibat1l(r4)
+ isync
+ mtibat1u(r3)
+ isync
+ mtdbat1l(r4)
+ isync
+ mtdbat1u(r3)
+ isync
+ sync
/*
* Set up I/D BAT2
*/
- lis r4, CFG_IBAT2L@h
- ori r4, r4, CFG_IBAT2L@l
- lis r3, CFG_IBAT2U@h
- ori r3, r3, CFG_IBAT2U@l
+ lis r4, CFG_IBAT2L@h
+ ori r4, r4, CFG_IBAT2L@l
+ lis r3, CFG_IBAT2U@h
+ ori r3, r3, CFG_IBAT2U@l
- isync
- mtibat2l(r4)
- isync
- mtibat2u(r3)
- isync
- mtdbat2l(r4)
- isync
- mtdbat2u(r3)
- isync
- sync
+ isync
+ mtibat2l(r4)
+ isync
+ mtibat2u(r3)
+ isync
+ mtdbat2l(r4)
+ isync
+ mtdbat2u(r3)
+ isync
+ sync
/*
* Setup I/D BAT3
*/
- lis r4, CFG_IBAT3L@h
- ori r4, r4, CFG_IBAT3L@l
- lis r3, CFG_IBAT3U@h
- ori r3, r3, CFG_IBAT3U@l
+ lis r4, CFG_IBAT3L@h
+ ori r4, r4, CFG_IBAT3L@l
+ lis r3, CFG_IBAT3U@h
+ ori r3, r3, CFG_IBAT3U@l
- isync
- mtibat3l(r4)
- isync
- mtibat3u(r3)
- isync
- mtdbat3l(r4)
- isync
- mtdbat3u(r3)
- isync
- sync
+ isync
+ mtibat3l(r4)
+ isync
+ mtibat3u(r3)
+ isync
+ mtdbat3l(r4)
+ isync
+ mtdbat3u(r3)
+ isync
+ sync
/*
* Invalidate all 64 TLB's
*/
- lis r3, 0
- mtctr r3
- lis r5, 4
+ lis r3, 0
+ mtctr r3
+ lis r5, 4
tlblp:
- tlbie r3
- sync
- addi r3, r3, 0x1000
- cmplw r3, r5
- blt tlblp
+ tlbie r3
+ sync
+ addi r3, r3, 0x1000
+ cmplw r3, r5
+ blt tlblp
- sync
+ sync
/*
* Enable Data Translation
@@ -193,7 +193,7 @@
isync
sync
- blr
+ blr
#ifdef USE_V2_INIT
@@ -213,8 +213,8 @@
/* MPC8245/BMW CPCI System Init
* Jimmy Blair, Broadcom Corp, 2002.
*/
- mflr r11
- /* Zero-out registers */
+ mflr r11
+ /* Zero-out registers */
addis r0,r0,0
mtspr SPRG0,r0
@@ -244,7 +244,7 @@
/* Set MPU/MSR to a known state. Turn off FP */
#if 1 /* Turn off floating point (remove to keep FP on) */
- andi. r3, r3, 0
+ andi. r3, r3, 0
sync
mtmsr r3
isync
@@ -368,10 +368,10 @@
rlwinm r3, r4, 0, 21, 19 /* clear the ICFI bit */
/*
- * The setting of the instruction cache enable (ICE) bit must be
- * preceded by an isync instruction to prevent the cache from being
- * enabled or disabled while an instruction access is in progress.
- */
+ * The setting of the instruction cache enable (ICE) bit must be
+ * preceded by an isync instruction to prevent the cache from being
+ * enabled or disabled while an instruction access is in progress.
+ */
isync
writeReg4:
mtspr HID0, r4 /* Enable Instr Cache & Inval cache */
@@ -397,13 +397,13 @@
cmp 0,0,r3,r7
beq cr0, X4_KAHLUA_START
- /* It's not an 8240, is it an 8245? */
+ /* It's not an 8240, is it an 8245? */
LOADPTR (r7, KAHLUA2_ID) /* Kahlua PCI controller ID */
cmp 0,0,r3,r7
beq cr0, X4_KAHLUA_START
- /* Save the PCI controller type in r7 */
+ /* Save the PCI controller type in r7 */
mr r7, r3
LOADPTR (r5, PREP_REG_ADDR)
@@ -433,33 +433,33 @@
LOADPTR (r3, PROC_INT2_ADR) /* Processor I/F Config 2 reg. */
stwbrx r3,0,r5
- lis r4, 0x2000 /* Flush PCI config writes */
+ lis r4, 0x2000 /* Flush PCI config writes */
stwbrx r4,0,r6
LOADPTR (r9, KAHLUA2_ID)
- cmpl 0, 0, r7, r9
- bne L1not8245
+ cmpl 0, 0, r7, r9
+ bne L1not8245
- /* MIOCR1 -- turn on bit for DLL delay */
+ /* MIOCR1 -- turn on bit for DLL delay */
LOADPTR (r3, MIOCR1_ADR_X)
stwbrx r3,0,r5
- li r4, 0x04
+ li r4, 0x04
stb r4, MIOCR1_SHIFT(r6)
- /* For the MPC8245, set register 77 to %00100000 (see Errata #15) */
- /* SDRAM_CLK_DEL (0x77)*/
+ /* For the MPC8245, set register 77 to %00100000 (see Errata #15) */
+ /* SDRAM_CLK_DEL (0x77)*/
LOADPTR (r3, MIOCR2_ADR_X)
stwbrx r3,0,r5
- li r4, 0x10
+ li r4, 0x10
stb r4, MIOCR2_SHIFT(r6)
- /* PMCR2 -- set PCI hold delay to <10>b for 33 MHz */
+ /* PMCR2 -- set PCI hold delay to <10>b for 33 MHz */
LOADPTR (r3, PMCR2_ADR_X)
stwbrx r3,0,r5
- li r4, 0x20
+ li r4, 0x20
stb r4, PMCR2_SHIFT(r6)
/* Initialize EUMBBAR early since 8245 has internal UART in EUMB */
@@ -471,21 +471,21 @@
L1not8245:
- /* Toggle the DLL reset bit in AMBOR */
+ /* Toggle the DLL reset bit in AMBOR */
LOADPTR (r3, AMBOR)
stwbrx r3,0,r5
lbz r4, 0(r6)
- andi. r4, r4, 0xdf
+ andi. r4, r4, 0xdf
stb r4, 0(r6) /* Clear DLL_RESET */
- sync
+ sync
- ori r4, r4, 0x20 /* Set DLL_RESET */
+ ori r4, r4, 0x20 /* Set DLL_RESET */
stb r4, 0(r6)
- sync
+ sync
- andi. r4, r4, 0xdf
+ andi. r4, r4, 0xdf
stb r4, 0(r6) /* Clear DLL_RESET */
@@ -533,10 +533,10 @@
MC1_MEMGO << 19 | MC1_SREN << 18 | \
MC1_RAM_TYPE << 17 | MC1_PCKEN << 16 )
li r3, MC1_BANKBITS
- cmpl 0, 0, r7, r9 /* Check for Kahlua2 */
- bne BankBitsAdd
- cmpli 0, 0, r3, 0x5555
- beq K2BankBitsHack /* On 8245, 5555 ==> 0 */
+ cmpl 0, 0, r7, r9 /* Check for Kahlua2 */
+ bne BankBitsAdd
+ cmpli 0, 0, r3, 0x5555
+ beq K2BankBitsHack /* On 8245, 5555 ==> 0 */
BankBitsAdd:
ori r4, r3, 0
K2BankBitsHack:
@@ -569,9 +569,9 @@
MC2_INLRD_PARECC_CHK_EN << 18 | \
MC2_ECC_EN << 17 | MC2_EDO << 16 | \
MC2_REFINT << 2 | MC2_RSV_PG << 1 | MC2_RMW_PAR)
- cmpl 0, 0, r7, r9 /* Check for Kahlua2 */
- bne notK2
- /* clear Kahlua2 reserved bits */
+ cmpl 0, 0, r7, r9 /* Check for Kahlua2 */
+ bne notK2
+ /* clear Kahlua2 reserved bits */
LOADPTR (r3, 0xfffcffff)
and r4, r4, r3
notK2:
@@ -599,9 +599,9 @@
MC3_RDLAT << 20 | MC3_CPX << 19 | \
MC3_RAS6P << 15 | MC3_CAS5 << 12 | MC3_CP4 << 9 | \
MC3_CAS3 << 6 | MC3_RCD2 << 3 | MC3_RP1)
- cmpl 0, 0, r7, r9 /* Check for Kahlua2 */
- bne notK2b
- /* clear Kahlua2 reserved bits */
+ cmpl 0, 0, r7, r9 /* Check for Kahlua2 */
+ bne notK2b
+ /* clear Kahlua2 reserved bits */
LOADPTR (r3, 0xff000000)
and r4, r4, r3
notK2b:
@@ -633,9 +633,9 @@
MC4_REGDIMM << 15 | MC4_SDMODE_CAS << 12 | \
MC4_SDMODE_WRAP << 11 | MC4_SDMODE_BURST << 8 | \
MC4_ACTORW << 4 | MC4_BSTOPRE_L)
- cmpl 0, 0, r7, r9 /* Check for Kahlua 2 */
- bne notK2c
- /* Turn on Kahlua2 extended ROM space */
+ cmpl 0, 0, r7, r9 /* Check for Kahlua 2 */
+ bne notK2c
+ /* Turn on Kahlua2 extended ROM space */
LOADPTR (r3, 0x00200000)
or r4, r4, r3
notK2c:
@@ -745,13 +745,12 @@
sync
eieio
- mtlr r11
+ mtlr r11
blr
#else /* USE_V2_INIT */
-
/* U-Boot works, but memory will not run reliably for all address ranges.
* Early U-Boot Working init, but 2.4.19 kernel will crash since memory is not
* initialized correctly. Could work if debugged.
@@ -898,106 +897,106 @@
.globl early_init_f
early_init_f:
- mflr r11
- lis r10, 0x8000
+ mflr r11
+ lis r10, 0x8000
- /* PCI Latency Timer */
- li r4, 0x0d
- ori r3, r10, PLTR@l
- bl __pci_config_write_8
+ /* PCI Latency Timer */
+ li r4, 0x0d
+ ori r3, r10, PLTR@l
+ bl __pci_config_write_8
- /* Cache Line Size */
- li r4, 0x08
- ori r3, r10, PCLSR@l
- bl __pci_config_write_8
+ /* Cache Line Size */
+ li r4, 0x08
+ ori r3, r10, PCLSR@l
+ bl __pci_config_write_8
- /* PCI Cmd */
- li r4, 6
- ori r3, r10, PCICR@l
- bl __pci_config_write_16
+ /* PCI Cmd */
+ li r4, 6
+ ori r3, r10, PCICR@l
+ bl __pci_config_write_16
#if 1
- /* PCI Stat */
- ori r3, r10, PCISR@l
- bl __pci_config_read_16
- ori r4, r4, 0xffff
- ori r3, r10, PCISR@l
- bl __pci_config_write_16
+ /* PCI Stat */
+ ori r3, r10, PCISR@l
+ bl __pci_config_read_16
+ ori r4, r4, 0xffff
+ ori r3, r10, PCISR@l
+ bl __pci_config_write_16
#endif
- /* PICR1 */
- lis r4, 0xff14
- ori r4, r4, 0x1b98
- ori r3, r10, PICR1@l
- bl __pci_config_write_32
+ /* PICR1 */
+ lis r4, 0xff14
+ ori r4, r4, 0x1b98
+ ori r3, r10, PICR1@l
+ bl __pci_config_write_32
- /* PICR2 */
- lis r4, 0x0404
- ori r4, r4, 0x0004
- ori r3, r10, PICR2@l
- bl __pci_config_write_32
+ /* PICR2 */
+ lis r4, 0x0404
+ ori r4, r4, 0x0004
+ ori r3, r10, PICR2@l
+ bl __pci_config_write_32
/* MIOCR1 */
- li r4, 0x04
- ori r3, r10, MIOCR1@l
- bl __pci_config_write_8
+ li r4, 0x04
+ ori r3, r10, MIOCR1@l
+ bl __pci_config_write_8
/* For the MPC8245, set register 77 to %00100000 (see Errata #15) */
/* SDRAM_CLK_DEL (0x77)*/
- li r4, 0x10
- ori r3, r10, MIOCR2@l
- bl __pci_config_write_8
+ li r4, 0x10
+ ori r3, r10, MIOCR2@l
+ bl __pci_config_write_8
- /* EUMBBAR */
- lis r4, 0xfc00
- ori r3, r10, EUMBBAR@l
- bl __pci_config_write_32
+ /* EUMBBAR */
+ lis r4, 0xfc00
+ ori r3, r10, EUMBBAR@l
+ bl __pci_config_write_32
/* AMBOR */
/* Even if Address Map B is not being used (though it should),
- * the memory DLL needs to be cleared/set/cleared before using memory.
+ * the memory DLL needs to be cleared/set/cleared before using memory.
*/
- ori r3, r10, AMBOR@l
- bl __pci_config_read_8 /* get Current bits */
+ ori r3, r10, AMBOR@l
+ bl __pci_config_read_8 /* get Current bits */
- andi. r4, r4, 0xffdf
- ori r3, r10, AMBOR@l
- bl __pci_config_write_16 /* Clear DLL_RESET */
+ andi. r4, r4, 0xffdf
+ ori r3, r10, AMBOR@l
+ bl __pci_config_write_16 /* Clear DLL_RESET */
- ori r4, r4, 0x0020
- ori r3, r10, AMBOR@l
- bl __pci_config_write_16 /* Set DLL_RESET */
+ ori r4, r4, 0x0020
+ ori r3, r10, AMBOR@l
+ bl __pci_config_write_16 /* Set DLL_RESET */
- andi. r4, r4, 0xffdf
- ori r3, r10, AMBOR@l
- bl __pci_config_write_16 /* Clear DLL_RESET */
+ andi. r4, r4, 0xffdf
+ ori r3, r10, AMBOR@l
+ bl __pci_config_write_16 /* Clear DLL_RESET */
- /* ERCR1 */
- lis r4, 0x8040 /* Enable RCS2, use supplied timings */
- ori r4, r4, 0x8000
- ori r3, r10, ERCR1@l
- bl __pci_config_write_32
+ /* ERCR1 */
+ lis r4, 0x8040 /* Enable RCS2, use supplied timings */
+ ori r4, r4, 0x8000
+ ori r3, r10, ERCR1@l
+ bl __pci_config_write_32
- /* ERCR2 */
- lis r4, 0x0000 /* Disable RCS3 parms */
- ori r4, r4, 0x0000
- ori r3, r10, ERCR2@l
- bl __pci_config_write_32
+ /* ERCR2 */
+ lis r4, 0x0000 /* Disable RCS3 parms */
+ ori r4, r4, 0x0000
+ ori r3, r10, ERCR2@l
+ bl __pci_config_write_32
- /* ERCR3 */
- lis r4, 0x0000 /* RCS3 at 0x70000000, 64K bytes */
- ori r4, r4, 0x0004
- ori r3, r10, ERCR2@l
- bl __pci_config_write_32
+ /* ERCR3 */
+ lis r4, 0x0000 /* RCS3 at 0x70000000, 64K bytes */
+ ori r4, r4, 0x0004
+ ori r3, r10, ERCR2@l
+ bl __pci_config_write_32
/* Preserve memgo bit */
- /* MCCR1 */
+ /* MCCR1 */
/* lis r4, 0x75a8 / Safe Local ROM = 11+3 clocks */
- lis r4, 0x75a0 /* Safe Local ROM = 11+3 clocks */
+ lis r4, 0x75a0 /* Safe Local ROM = 11+3 clocks */
/* lis r4, 0x73a0 / Fast Local ROM = 7+3 clocks */
/* oris r4, r4, 0x0010 / Burst ROM/Flash enable */
/* oris r4, r4, 0x0004 / Self-refresh enable */
@@ -1005,17 +1004,17 @@
/* ori r4,r4,0xFFFF / 16Mbit 2bank SDRAM */
/* ori r4,r4,0xAAAA / 256Mbit 4bank SDRAM (8245 only) */
/* ori r4,r4,0x5555 / 64Mbit 2bank SDRAM */
- ori r4,r4,0x0000 /* 64Mbit 4bank SDRAM */
+ ori r4,r4,0x0000 /* 64Mbit 4bank SDRAM */
- ori r3, r10, MCCR1@l
- bl __pci_config_write_32
+ ori r3, r10, MCCR1@l
+ bl __pci_config_write_32
- /* MCCR2 */
+ /* MCCR2 */
- lis r4,0x0000
+ lis r4,0x0000
/* oris r4,r4,0x4000 / TS_WAIT_TIMER = 3 clocks */
- oris r4,r4,0x1000 /* ASRISE = 8 clocks */
- oris r4,r4,0x0080 /* ASFALL = 8 clocks */
+ oris r4,r4,0x1000 /* ASRISE = 8 clocks */
+ oris r4,r4,0x0080 /* ASFALL = 8 clocks */
/* oris r4,r4,0x0010 / SDRAM Parity (else ECC) */
/* oris r4,r4,0x0008 / Write parity check */
/* oris r4,r4,0x0004 / SDRAM inline reads */
@@ -1030,143 +1029,142 @@
/* ori r4,r4,0x150c / 100 MHz mem bus = 1347 */
/* ori r4,r4,0x10fc / 83 MHz mem bus = 1087 */
/* ori r4,r4,0x0cc4 / 66 MHz mem bus = 817 */
- ori r4,r4,0x04cc /* 33 MHz mem bus (SAFE) = 307 */
+ ori r4,r4,0x04cc /* 33 MHz mem bus (SAFE) = 307 */
/* ori r4,r4,0x0002 / Reserve a page */
/* ori r4,r4,0x0001 / RWM parity */
- ori r3, r10, MCCR2@l
- bl __pci_config_write_32
+ ori r3, r10, MCCR2@l
+ bl __pci_config_write_32
- /* MCCR3 */
- lis r4,0x0000 /* BSTOPRE_M = 7 (see A/N) */
- oris r4,r4,0x0500 /* REFREC = 8 clocks */
- ori r3, r10, MCCR3@l
- bl __pci_config_write_32
+ /* MCCR3 */
+ lis r4,0x0000 /* BSTOPRE_M = 7 (see A/N) */
+ oris r4,r4,0x0500 /* REFREC = 8 clocks */
+ ori r3, r10, MCCR3@l
+ bl __pci_config_write_32
- /* MCCR4 */ /* Turn on registered buffer mode */
- lis r4, 0x2000 /* PRETOACT = 3 clocks */
- oris r4,r4,0x0400 /* ACTOPRE = 5 clocks */
+ /* MCCR4 */ /* Turn on registered buffer mode */
+ lis r4, 0x2000 /* PRETOACT = 3 clocks */
+ oris r4,r4,0x0400 /* ACTOPRE = 5 clocks */
/* oris r4,r4,0x0080 / Enable 8-beat burst (32-bit bus) */
/* oris r4,r4,0x0040 / Enable Inline ECC/Parity */
- oris r4,r4,0x0020 /* EXTROM enabled */
- oris r4,r4,0x0010 /* Registered buffers */
+ oris r4,r4,0x0020 /* EXTROM enabled */
+ oris r4,r4,0x0010 /* Registered buffers */
/* oris r4,r4,0x0000 / BSTOPRE_U = 0 (see A/N) */
- oris r4,r4,0x0002 /* DBUS_SIZ[2] (8 bit on RCS1) */
+ oris r4,r4,0x0002 /* DBUS_SIZ[2] (8 bit on RCS1) */
/* ori r4,r4,0x8000 / Registered DIMMs */
- ori r4,r4,0x2000 /*CAS Latency (CL=3) (see RDLAT) */
+ ori r4,r4,0x2000 /*CAS Latency (CL=3) (see RDLAT) */
/* ori r4,r4,0x2000 / CAS Latency (CL=2) (see RDLAT) */
/* ori r4,r4,0x0300 / Sequential wrap/8-beat burst */
- ori r4,r4,0x0200 /* Sequential wrap/4-beat burst */
- ori r4,r4,0x0030 /* ACTORW = 3 clocks */
- ori r4,r4,0x0009 /* BSTOPRE_L = 9 (see A/N) */
+ ori r4,r4,0x0200 /* Sequential wrap/4-beat burst */
+ ori r4,r4,0x0030 /* ACTORW = 3 clocks */
+ ori r4,r4,0x0009 /* BSTOPRE_L = 9 (see A/N) */
- ori r3, r10, MCCR4@l
- bl __pci_config_write_32
+ ori r3, r10, MCCR4@l
+ bl __pci_config_write_32
/* MSAR1 */
- lis r4, 0xc0804000@h
- ori r4, r4, 0xc0804000@l
- ori r3, r10, MSAR1@l
- bl __pci_config_write_32
+ lis r4, 0xc0804000@h
+ ori r4, r4, 0xc0804000@l
+ ori r3, r10, MSAR1@l
+ bl __pci_config_write_32
/* MSAR2 */
- lis r4, 0xc0804000@h
- ori r4, r4, 0xc0804000@l
- ori r3, r10, MSAR2@l
- bl __pci_config_write_32
+ lis r4, 0xc0804000@h
+ ori r4, r4, 0xc0804000@l
+ ori r3, r10, MSAR2@l
+ bl __pci_config_write_32
/* MESAR1 */
- lis r4, 0x00000000@h
- ori r4, r4, 0x00000000@l
- ori r3, r10, EMSAR1@l
- bl __pci_config_write_32
+ lis r4, 0x00000000@h
+ ori r4, r4, 0x00000000@l
+ ori r3, r10, EMSAR1@l
+ bl __pci_config_write_32
/* MESAR2 */
- lis r4, 0x01010101@h
- ori r4, r4, 0x01010101@l
- ori r3, r10, EMSAR2@l
- bl __pci_config_write_32
+ lis r4, 0x01010101@h
+ ori r4, r4, 0x01010101@l
+ ori r3, r10, EMSAR2@l
+ bl __pci_config_write_32
/* MEAR1 */
- lis r4, 0xffbf7f3f@h
- ori r4, r4, 0xffbf7f3f@l
- ori r3, r10, MEAR1@l
- bl __pci_config_write_32
+ lis r4, 0xffbf7f3f@h
+ ori r4, r4, 0xffbf7f3f@l
+ ori r3, r10, MEAR1@l
+ bl __pci_config_write_32
/* MEAR2 */
- lis r4, 0xffbf7f3f@h
- ori r4, r4, 0xffbf7f3f@l
- ori r3, r10, MEAR2@l
- bl __pci_config_write_32
+ lis r4, 0xffbf7f3f@h
+ ori r4, r4, 0xffbf7f3f@l
+ ori r3, r10, MEAR2@l
+ bl __pci_config_write_32
/* MEEAR1 */
- lis r4, 0x00000000@h
- ori r4, r4, 0x00000000@l
- ori r3, r10, EMEAR1@l
- bl __pci_config_write_32
+ lis r4, 0x00000000@h
+ ori r4, r4, 0x00000000@l
+ ori r3, r10, EMEAR1@l
+ bl __pci_config_write_32
/* MEEAR2 */
- lis r4, 0x01010101@h
- ori r4, r4, 0x01010101@l
- ori r3, r10, EMEAR2@l
- bl __pci_config_write_32
+ lis r4, 0x01010101@h
+ ori r4, r4, 0x01010101@l
+ ori r3, r10, EMEAR2@l
+ bl __pci_config_write_32
/* ODCR */
- li r4, 0x7f
- ori r3, r10, ODCR@l
- bl __pci_config_write_8
+ li r4, 0x7f
+ ori r3, r10, ODCR@l
+ bl __pci_config_write_8
/* MBER */
- li r4, 0x01
- ori r3, r10, MBER@l
- bl __pci_config_write_8
+ li r4, 0x01
+ ori r3, r10, MBER@l
+ bl __pci_config_write_8
- /* Page CTR aka PGMAX */
- li r4, 0x32
- ori r3, r10, 0x70
- bl __pci_config_write_8
+ /* Page CTR aka PGMAX */
+ li r4, 0x32
+ ori r3, r10, 0x70
+ bl __pci_config_write_8
#if 0
/* CLK Drive */
- ori r4, r10, 0xfc01 /* Top bit will be ignored */
- ori r3, r10, 0x74
- bl __pci_config_write_16
+ ori r4, r10, 0xfc01 /* Top bit will be ignored */
+ ori r3, r10, 0x74
+ bl __pci_config_write_16
#endif
/* delay */
- lis r7, 1
- mtctr r7
+ lis r7, 1
+ mtctr r7
label1: bdnz label1
- /* Set memgo bit */
- /* MCCR1 */
- ori r3, r10, MCCR1@l
- bl __pci_config_read_32
- lis r7, 0x0008
- or r4, r3, r7
- ori r3, r10, MCCR1@l
- bl __pci_config_write_32
+ /* Set memgo bit */
+ /* MCCR1 */
+ ori r3, r10, MCCR1@l
+ bl __pci_config_read_32
+ lis r7, 0x0008
+ or r4, r3, r7
+ ori r3, r10, MCCR1@l
+ bl __pci_config_write_32
/* delay again */
- lis r7, 1
- mtctr r7
+ lis r7, 1
+ mtctr r7
label2: bdnz label2
#if 0
/* DEBUG: Infinite loop, write then read */
loop:
- lis r7, 0xffff
- mtctr r7
- li r3, 0x5004
- lis r4, 0xa0a0
- ori r4, r4, 0x5050
+ lis r7, 0xffff
+ mtctr r7
+ li r3, 0x5004
+ lis r4, 0xa0a0
+ ori r4, r4, 0x5050
bl write_32_ne
- li r3, 0x5004
+ li r3, 0x5004
bl read_32_ne
- bdnz loop
+ bdnz loop
#endif
- mtlr r11
- blr
+ mtlr r11
+ blr
#endif
-
diff --git a/board/bmw/flash.c b/board/bmw/flash.c
index be62274..e04af97 100644
--- a/board/bmw/flash.c
+++ b/board/bmw/flash.c
@@ -91,7 +91,6 @@
#endif /* 0 */
-
static unsigned long
flash_id(unsigned char mfct, unsigned char chip)
{
@@ -135,7 +134,6 @@
}
-
unsigned long
flash_init(void)
{
@@ -181,9 +179,9 @@
switch(pflinfo->flash_id & FLASH_TYPEMASK)
{
case FLASH_AM040:
- pflinfo->size = 0x00080000;
+ pflinfo->size = 0x00080000;
pflinfo->sector_count = 8;
- for(j = 0; j < 8; j++)
+ for(j = 0; j < 8; j++)
{
pflinfo->start[j] = base_address + 0x00010000 * j;
pflinfo->protect[j] = flash[(j << 16) | 0x2];
@@ -201,16 +199,16 @@
pflinfo->start[j+3] = base_address + 0x00010000 * j;
}
#if 0
- /* check for protected sectors */
- for (j = 0; j < pflinfo->sector_count; j++) {
- /* read sector protection at sector address, (A7 .. A0) = 0x02 */
- /* D0 = 1 if protected */
- addr2 = (volatile FLASH_WORD_SIZE *)(pflinfo->start[j]);
- if (pflinfo->flash_id & FLASH_MAN_SST)
- pflinfo->protect[j] = 0;
- else
- pflinfo->protect[j] = addr2[2] & 1;
- }
+ /* check for protected sectors */
+ for (j = 0; j < pflinfo->sector_count; j++) {
+ /* read sector protection at sector address, (A7 .. A0) = 0x02 */
+ /* D0 = 1 if protected */
+ addr2 = (volatile FLASH_WORD_SIZE *)(pflinfo->start[j]);
+ if (pflinfo->flash_id & FLASH_MAN_SST)
+ pflinfo->protect[j] = 0;
+ else
+ pflinfo->protect[j] = addr2[2] & 1;
+ }
#endif
break;
}
@@ -245,30 +243,30 @@
int i;
/* set up sector start address table */
- if (info->flash_id & FLASH_MAN_SST)
- {
- for (i = 0; i < info->sector_count; i++)
- info->start[i] = base + (i * 0x00010000);
- }
- else
+ if (info->flash_id & FLASH_MAN_SST)
+ {
+ for (i = 0; i < info->sector_count; i++)
+ info->start[i] = base + (i * 0x00010000);
+ }
+ else
if (info->flash_id & FLASH_BTYPE) {
- /* set sector offsets for bottom boot block type */
- info->start[0] = base + 0x00000000;
- info->start[1] = base + 0x00004000;
- info->start[2] = base + 0x00006000;
- info->start[3] = base + 0x00008000;
- for (i = 4; i < info->sector_count; i++) {
- info->start[i] = base + (i * 0x00010000) - 0x00030000;
- }
+ /* set sector offsets for bottom boot block type */
+ info->start[0] = base + 0x00000000;
+ info->start[1] = base + 0x00004000;
+ info->start[2] = base + 0x00006000;
+ info->start[3] = base + 0x00008000;
+ for (i = 4; i < info->sector_count; i++) {
+ info->start[i] = base + (i * 0x00010000) - 0x00030000;
+ }
} else {
- /* set sector offsets for top boot block type */
- i = info->sector_count - 1;
- info->start[i--] = base + info->size - 0x00004000;
- info->start[i--] = base + info->size - 0x00006000;
- info->start[i--] = base + info->size - 0x00008000;
- for (; i >= 0; i--) {
- info->start[i] = base + i * 0x00010000;
- }
+ /* set sector offsets for top boot block type */
+ i = info->sector_count - 1;
+ info->start[i--] = base + info->size - 0x00004000;
+ info->start[i--] = base + info->size - 0x00006000;
+ info->start[i--] = base + info->size - 0x00008000;
+ for (; i >= 0; i--) {
+ info->start[i] = base + i * 0x00010000;
+ }
}
}
@@ -367,7 +365,7 @@
short i;
FLASH_WORD_SIZE value;
ulong base = (ulong)addr;
- volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *)addr;
+ volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *)addr;
printf("flash_get_size: \n");
/* Write auto select command: read Manufacturer ID */
@@ -379,123 +377,123 @@
switch (value) {
case (FLASH_WORD_SIZE)AMD_MANUFACT:
- info->flash_id = FLASH_MAN_AMD;
- break;
+ info->flash_id = FLASH_MAN_AMD;
+ break;
case (FLASH_WORD_SIZE)FUJ_MANUFACT:
- info->flash_id = FLASH_MAN_FUJ;
- break;
+ info->flash_id = FLASH_MAN_FUJ;
+ break;
case (FLASH_WORD_SIZE)SST_MANUFACT:
- info->flash_id = FLASH_MAN_SST;
- break;
+ info->flash_id = FLASH_MAN_SST;
+ break;
default:
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- return (0); /* no or unknown flash */
+ info->flash_id = FLASH_UNKNOWN;
+ info->sector_count = 0;
+ info->size = 0;
+ return (0); /* no or unknown flash */
}
printf("recognised manufacturer");
value = addr2[ADDR3]; /* device ID */
- debug ("\ndev_code=%x\n", value);
+ debug ("\ndev_code=%x\n", value);
switch (value) {
case (FLASH_WORD_SIZE)AMD_ID_LV400T:
- info->flash_id += FLASH_AM400T;
- info->sector_count = 11;
- info->size = 0x00080000;
- break; /* => 0.5 MB */
+ info->flash_id += FLASH_AM400T;
+ info->sector_count = 11;
+ info->size = 0x00080000;
+ break; /* => 0.5 MB */
case (FLASH_WORD_SIZE)AMD_ID_LV400B:
- info->flash_id += FLASH_AM400B;
- info->sector_count = 11;
- info->size = 0x00080000;
- break; /* => 0.5 MB */
+ info->flash_id += FLASH_AM400B;
+ info->sector_count = 11;
+ info->size = 0x00080000;
+ break; /* => 0.5 MB */
case (FLASH_WORD_SIZE)AMD_ID_LV800T:
- info->flash_id += FLASH_AM800T;
- info->sector_count = 19;
- info->size = 0x00100000;
- break; /* => 1 MB */
+ info->flash_id += FLASH_AM800T;
+ info->sector_count = 19;
+ info->size = 0x00100000;
+ break; /* => 1 MB */
case (FLASH_WORD_SIZE)AMD_ID_LV800B:
- info->flash_id += FLASH_AM800B;
- info->sector_count = 19;
- info->size = 0x00100000;
- break; /* => 1 MB */
+ info->flash_id += FLASH_AM800B;
+ info->sector_count = 19;
+ info->size = 0x00100000;
+ break; /* => 1 MB */
case (FLASH_WORD_SIZE)AMD_ID_LV160T:
- info->flash_id += FLASH_AM160T;
- info->sector_count = 35;
- info->size = 0x00200000;
- break; /* => 2 MB */
+ info->flash_id += FLASH_AM160T;
+ info->sector_count = 35;
+ info->size = 0x00200000;
+ break; /* => 2 MB */
case (FLASH_WORD_SIZE)AMD_ID_LV160B:
- info->flash_id += FLASH_AM160B;
- info->sector_count = 35;
- info->size = 0x00200000;
- break; /* => 2 MB */
+ info->flash_id += FLASH_AM160B;
+ info->sector_count = 35;
+ info->size = 0x00200000;
+ break; /* => 2 MB */
case (FLASH_WORD_SIZE)SST_ID_xF800A:
- info->flash_id += FLASH_SST800A;
- info->sector_count = 16;
- info->size = 0x00100000;
- break; /* => 1 MB */
+ info->flash_id += FLASH_SST800A;
+ info->sector_count = 16;
+ info->size = 0x00100000;
+ break; /* => 1 MB */
case (FLASH_WORD_SIZE)SST_ID_xF160A:
- info->flash_id += FLASH_SST160A;
- info->sector_count = 32;
- info->size = 0x00200000;
- break; /* => 2 MB */
+ info->flash_id += FLASH_SST160A;
+ info->sector_count = 32;
+ info->size = 0x00200000;
+ break; /* => 2 MB */
case (FLASH_WORD_SIZE)AMD_ID_F040B:
- info->flash_id += FLASH_AM040;
- info->sector_count = 8;
- info->size = 0x00080000;
- break; /* => 0.5 MB */
+ info->flash_id += FLASH_AM040;
+ info->sector_count = 8;
+ info->size = 0x00080000;
+ break; /* => 0.5 MB */
default:
- info->flash_id = FLASH_UNKNOWN;
- return (0); /* => no or unknown flash */
+ info->flash_id = FLASH_UNKNOWN;
+ return (0); /* => no or unknown flash */
}
printf("flash id %lx; sector count %x, size %lx\n", info->flash_id,info->sector_count,info->size);
/* set up sector start address table */
- if (info->flash_id & FLASH_MAN_SST)
- {
- for (i = 0; i < info->sector_count; i++)
- info->start[i] = base + (i * 0x00010000);
- }
- else
+ if (info->flash_id & FLASH_MAN_SST)
+ {
+ for (i = 0; i < info->sector_count; i++)
+ info->start[i] = base + (i * 0x00010000);
+ }
+ else
if (info->flash_id & FLASH_BTYPE) {
- /* set sector offsets for bottom boot block type */
- info->start[0] = base + 0x00000000;
- info->start[1] = base + 0x00004000;
- info->start[2] = base + 0x00006000;
- info->start[3] = base + 0x00008000;
- for (i = 4; i < info->sector_count; i++) {
- info->start[i] = base + (i * 0x00010000) - 0x00030000;
- }
+ /* set sector offsets for bottom boot block type */
+ info->start[0] = base + 0x00000000;
+ info->start[1] = base + 0x00004000;
+ info->start[2] = base + 0x00006000;
+ info->start[3] = base + 0x00008000;
+ for (i = 4; i < info->sector_count; i++) {
+ info->start[i] = base + (i * 0x00010000) - 0x00030000;
+ }
} else {
- /* set sector offsets for top boot block type */
- i = info->sector_count - 1;
- info->start[i--] = base + info->size - 0x00004000;
- info->start[i--] = base + info->size - 0x00006000;
- info->start[i--] = base + info->size - 0x00008000;
- for (; i >= 0; i--) {
- info->start[i] = base + i * 0x00010000;
- }
+ /* set sector offsets for top boot block type */
+ i = info->sector_count - 1;
+ info->start[i--] = base + info->size - 0x00004000;
+ info->start[i--] = base + info->size - 0x00006000;
+ info->start[i--] = base + info->size - 0x00008000;
+ for (; i >= 0; i--) {
+ info->start[i] = base + i * 0x00010000;
+ }
}
/* check for protected sectors */
for (i = 0; i < info->sector_count; i++) {
- /* read sector protection at sector address, (A7 .. A0) = 0x02 */
- /* D0 = 1 if protected */
- addr2 = (volatile FLASH_WORD_SIZE *)(info->start[i]);
- if (info->flash_id & FLASH_MAN_SST)
- info->protect[i] = 0;
- else
- info->protect[i] = addr2[2] & 1;
+ /* read sector protection at sector address, (A7 .. A0) = 0x02 */
+ /* D0 = 1 if protected */
+ addr2 = (volatile FLASH_WORD_SIZE *)(info->start[i]);
+ if (info->flash_id & FLASH_MAN_SST)
+ info->protect[i] = 0;
+ else
+ info->protect[i] = addr2[2] & 1;
}
/*
@@ -503,7 +501,7 @@
*/
if (info->flash_id != FLASH_UNKNOWN) {
addr2 = (FLASH_WORD_SIZE *)info->start[0];
- *addr2 = (FLASH_WORD_SIZE)0x00F000F0; /* reset bank */
+ *addr2 = (FLASH_WORD_SIZE)0x00F000F0; /* reset bank */
}
return (info->size);
@@ -521,32 +519,32 @@
unsigned char sh8b;
if ((s_first < 0) || (s_first > s_last)) {
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("- missing\n");
- } else {
- printf ("- no sectors to erase\n");
- }
- return 1;
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("- missing\n");
+ } else {
+ printf ("- no sectors to erase\n");
+ }
+ return 1;
}
if ((info->flash_id == FLASH_UNKNOWN) ||
- (info->flash_id > (FLASH_MAN_STM | FLASH_AMD_COMP))) {
- printf ("Can't erase unknown flash type - aborted\n");
- return 1;
+ (info->flash_id > (FLASH_MAN_STM | FLASH_AMD_COMP))) {
+ printf ("Can't erase unknown flash type - aborted\n");
+ return 1;
}
prot = 0;
for (sect=s_first; sect<=s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
+ if (info->protect[sect]) {
+ prot++;
+ }
}
if (prot) {
- printf ("- Warning: %d protected sectors will not be erased!\n",
- prot);
+ printf ("- Warning: %d protected sectors will not be erased!\n",
+ prot);
} else {
- printf ("\n");
+ printf ("\n");
}
l_sect = -1;
@@ -568,28 +566,28 @@
/* Start erase on unprotected sectors */
for (sect = s_first; sect<=s_last; sect++) {
- if (info->protect[sect] == 0) { /* not protected */
- addr = (FLASH_WORD_SIZE *)(info->start[0] + (
+ if (info->protect[sect] == 0) { /* not protected */
+ addr = (FLASH_WORD_SIZE *)(info->start[0] + (
(info->start[sect] - info->start[0]) << sh8b));
- if (info->flash_id & FLASH_MAN_SST)
- {
- addr[ADDR0 << sh8b] = (FLASH_WORD_SIZE)0x00AA00AA;
- addr[ADDR1 << sh8b] = (FLASH_WORD_SIZE)0x00550055;
- addr[ADDR0 << sh8b] = (FLASH_WORD_SIZE)0x00800080;
- addr[ADDR0 << sh8b] = (FLASH_WORD_SIZE)0x00AA00AA;
- addr[ADDR1 << sh8b] = (FLASH_WORD_SIZE)0x00550055;
- addr[0] = (FLASH_WORD_SIZE)0x00500050; /* block erase */
- udelay(30000); /* wait 30 ms */
- }
- else
- addr[0] = (FLASH_WORD_SIZE)0x00300030; /* sector erase */
- l_sect = sect;
- }
+ if (info->flash_id & FLASH_MAN_SST)
+ {
+ addr[ADDR0 << sh8b] = (FLASH_WORD_SIZE)0x00AA00AA;
+ addr[ADDR1 << sh8b] = (FLASH_WORD_SIZE)0x00550055;
+ addr[ADDR0 << sh8b] = (FLASH_WORD_SIZE)0x00800080;
+ addr[ADDR0 << sh8b] = (FLASH_WORD_SIZE)0x00AA00AA;
+ addr[ADDR1 << sh8b] = (FLASH_WORD_SIZE)0x00550055;
+ addr[0] = (FLASH_WORD_SIZE)0x00500050; /* block erase */
+ udelay(30000); /* wait 30 ms */
+ }
+ else
+ addr[0] = (FLASH_WORD_SIZE)0x00300030; /* sector erase */
+ l_sect = sect;
+ }
}
/* re-enable interrupts if necessary */
if (flag)
- enable_interrupts();
+ enable_interrupts();
/* wait at least 80us - let's wait 1 ms */
udelay (1000);
@@ -598,22 +596,22 @@
* We wait for the last triggered sector
*/
if (l_sect < 0)
- goto DONE;
+ goto DONE;
start = get_timer (0);
last = start;
addr = (FLASH_WORD_SIZE *)(info->start[0] + (
(info->start[l_sect] - info->start[0]) << sh8b));
while ((addr[0] & (FLASH_WORD_SIZE)0x00800080) != (FLASH_WORD_SIZE)0x00800080) {
- if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
- printf ("Timeout\n");
- return 1;
- }
- /* show that we're waiting */
- if ((now - last) > 1000) { /* every second */
- serial_putc ('.');
- last = now;
- }
+ if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ printf ("Timeout\n");
+ return 1;
+ }
+ /* show that we're waiting */
+ if ((now - last) > 1000) { /* every second */
+ serial_putc ('.');
+ last = now;
+ }
}
DONE:
@@ -643,42 +641,42 @@
* handle unaligned start bytes
*/
if ((l = addr - wp) != 0) {
- data = 0;
- for (i=0, cp=wp; i<l; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
- for (; i<4 && cnt>0; ++i) {
- data = (data << 8) | *src++;
- --cnt;
- ++cp;
- }
- for (; cnt==0 && i<4; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
+ data = 0;
+ for (i=0, cp=wp; i<l; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+ for (; i<4 && cnt>0; ++i) {
+ data = (data << 8) | *src++;
+ --cnt;
+ ++cp;
+ }
+ for (; cnt==0 && i<4; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
- if ((rc = write_word(info, wp, data)) != 0) {
- return (rc);
- }
- wp += 4;
+ if ((rc = write_word(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 4;
}
/*
* handle word aligned part
*/
while (cnt >= 4) {
- data = 0;
- for (i=0; i<4; ++i) {
- data = (data << 8) | *src++;
- }
- if ((rc = write_word(info, wp, data)) != 0) {
- return (rc);
- }
- wp += 4;
- cnt -= 4;
+ data = 0;
+ for (i=0; i<4; ++i) {
+ data = (data << 8) | *src++;
+ }
+ if ((rc = write_word(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 4;
+ cnt -= 4;
}
if (cnt == 0) {
- return (0);
+ return (0);
}
/*
@@ -686,11 +684,11 @@
*/
data = 0;
for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
- data = (data << 8) | *src++;
- --cnt;
+ data = (data << 8) | *src++;
+ --cnt;
}
for (; i<4; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
+ data = (data << 8) | (*(uchar *)cp);
}
return (write_word(info, wp, data));
@@ -704,12 +702,12 @@
*/
static int write_word (flash_info_t *info, ulong dest, ulong data)
{
- volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *)info->start[0];
- volatile FLASH_WORD_SIZE *dest2;
- volatile FLASH_WORD_SIZE *data2 = (FLASH_WORD_SIZE *)&data;
+ volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *)info->start[0];
+ volatile FLASH_WORD_SIZE *dest2;
+ volatile FLASH_WORD_SIZE *data2 = (FLASH_WORD_SIZE *)&data;
ulong start;
int flag;
- int i;
+ int i;
unsigned char sh8b;
/* Check the ROM CS */
@@ -723,32 +721,32 @@
/* Check if Flash is (sufficiently) erased */
if ((*dest2 & (FLASH_WORD_SIZE)data) != (FLASH_WORD_SIZE)data) {
- return (2);
+ return (2);
}
/* Disable interrupts which might cause a timeout here */
flag = disable_interrupts();
- for (i=0; i<4/sizeof(FLASH_WORD_SIZE); i++)
- {
- addr2[ADDR0 << sh8b] = (FLASH_WORD_SIZE)0x00AA00AA;
- addr2[ADDR1 << sh8b] = (FLASH_WORD_SIZE)0x00550055;
- addr2[ADDR0 << sh8b] = (FLASH_WORD_SIZE)0x00A000A0;
+ for (i=0; i<4/sizeof(FLASH_WORD_SIZE); i++)
+ {
+ addr2[ADDR0 << sh8b] = (FLASH_WORD_SIZE)0x00AA00AA;
+ addr2[ADDR1 << sh8b] = (FLASH_WORD_SIZE)0x00550055;
+ addr2[ADDR0 << sh8b] = (FLASH_WORD_SIZE)0x00A000A0;
- dest2[i << sh8b] = data2[i];
+ dest2[i << sh8b] = data2[i];
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
- /* data polling for D7 */
- start = get_timer (0);
- while ((dest2[i << sh8b] & (FLASH_WORD_SIZE)0x00800080) !=
- (data2[i] & (FLASH_WORD_SIZE)0x00800080)) {
- if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
- return (1);
- }
- }
- }
+ /* data polling for D7 */
+ start = get_timer (0);
+ while ((dest2[i << sh8b] & (FLASH_WORD_SIZE)0x00800080) !=
+ (data2[i] & (FLASH_WORD_SIZE)0x00800080)) {
+ if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ return (1);
+ }
+ }
+ }
return (0);
}
diff --git a/board/bmw/m48t59y.c b/board/bmw/m48t59y.c
index 469f1ad..d72c861 100644
--- a/board/bmw/m48t59y.c
+++ b/board/bmw/m48t59y.c
@@ -320,4 +320,3 @@
{
m48_tod_init();
}
-
diff --git a/board/bmw/ns16550.c b/board/bmw/ns16550.c
index b6b6f4c..b1c28eb 100644
--- a/board/bmw/ns16550.c
+++ b/board/bmw/ns16550.c
@@ -55,6 +55,3 @@
{
return ((com_port->lsr & LSR_DR) != 0);
}
-
-
-
diff --git a/board/bmw/ns16550.h b/board/bmw/ns16550.h
index b80ac02..0b7b389 100644
--- a/board/bmw/ns16550.h
+++ b/board/bmw/ns16550.h
@@ -78,4 +78,3 @@
unsigned char NS16550_getc(volatile struct NS16550 *com_port);
int NS16550_tstc(volatile struct NS16550 *com_port);
void NS16550_reinit(volatile struct NS16550 *com_port, int baud_divisor);
-
diff --git a/board/bmw/u-boot.lds b/board/bmw/u-boot.lds
index 5ba99b1..98584dc 100644
--- a/board/bmw/u-boot.lds
+++ b/board/bmw/u-boot.lds
@@ -103,6 +103,11 @@
_edata = .;
PROVIDE (edata = .);
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
__start___ex_table = .;
__ex_table : { *(__ex_table) }
__stop___ex_table = .;
@@ -126,4 +131,3 @@
_end = . ;
PROVIDE (end = .);
}
-