| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Commands to deal with Synology specifics. |
| * |
| * Copyright (C) 2015 Phil Sutter <phil@nwl.cc> |
| */ |
| |
| #include <command.h> |
| #include <div64.h> |
| #include <env.h> |
| #include <net.h> |
| #include <spi.h> |
| #include <spi_flash.h> |
| #include <linux/mtd/mtd.h> |
| |
| #include <asm/io.h> |
| #include "../drivers/ddr/marvell/axp/ddr3_init.h" |
| |
| #include "cmd_syno.h" |
| |
| int do_syno_populate(int argc, char *const argv[]) |
| { |
| unsigned int bus = CONFIG_SF_DEFAULT_BUS; |
| unsigned int cs = CONFIG_SF_DEFAULT_CS; |
| unsigned int speed = CONFIG_SF_DEFAULT_SPEED; |
| unsigned int mode = CONFIG_SF_DEFAULT_MODE; |
| struct spi_flash *flash; |
| unsigned long addr = 0x80000; /* XXX: parameterize this? */ |
| loff_t offset = 0x007d0000; |
| loff_t len = 0x00010000; |
| char *buf, *bufp; |
| char var[128]; |
| char val[128]; |
| int ret, n; |
| |
| /* XXX: arg parsing to select flash here? */ |
| |
| flash = spi_flash_probe(bus, cs, speed, mode); |
| if (!flash) { |
| printf("Failed to initialize SPI flash at %u:%u\n", bus, cs); |
| return 1; |
| } |
| |
| buf = map_physmem(addr, len, MAP_WRBACK); |
| if (!buf) { |
| puts("Failed to map physical memory\n"); |
| return 1; |
| } |
| |
| ret = spi_flash_read(flash, offset, len, buf); |
| if (ret) { |
| puts("Failed to read from SPI flash\n"); |
| goto out_unmap; |
| } |
| |
| for (n = 0; n < SYNO_ETHADDR_MAX; n++) { |
| char ethaddr[ETH_ALEN]; |
| int i, sum = 0; |
| unsigned char csum = 0; |
| |
| for (i = 0, bufp = buf + n * 7; i < ETH_ALEN; i++) { |
| sum += bufp[i]; |
| csum += bufp[i]; |
| ethaddr[i] = bufp[i]; |
| } |
| if (!sum) /* MAC address empty */ |
| continue; |
| if (csum != bufp[i]) { /* seventh byte is checksum value */ |
| printf("Invalid MAC address for interface %d!\n", n); |
| continue; |
| } |
| if (n == 0) |
| sprintf(var, "ethaddr"); |
| else |
| sprintf(var, "eth%daddr", n); |
| snprintf(val, sizeof(val) - 1, |
| "%02x:%02x:%02x:%02x:%02x:%02x", |
| ethaddr[0], ethaddr[1], ethaddr[2], |
| ethaddr[3], ethaddr[4], ethaddr[5]); |
| printf("parsed %s = %s\n", var, val); |
| env_set(var, val); |
| } |
| if (!strncmp(buf + 32, SYNO_SN_TAG, strlen(SYNO_SN_TAG))) { |
| char *snp, *csump; |
| int csum = 0; |
| unsigned long c; |
| |
| snp = bufp = buf + 32 + strlen(SYNO_SN_TAG); |
| for (n = 0; bufp[n] && bufp[n] != ','; n++) |
| csum += bufp[n]; |
| bufp[n] = '\0'; |
| |
| /* should come right after, but you never know */ |
| bufp = strstr(bufp + n + 1, SYNO_CHKSUM_TAG); |
| if (!bufp) { |
| printf("Serial number checksum tag missing!\n"); |
| goto out_unmap; |
| } |
| |
| csump = bufp += strlen(SYNO_CHKSUM_TAG); |
| for (n = 0; bufp[n] && bufp[n] != ','; n++) |
| ; |
| bufp[n] = '\0'; |
| |
| if (strict_strtoul(csump, 10, &c) || c != csum) { |
| puts("Invalid serial number found!\n"); |
| ret = 1; |
| goto out_unmap; |
| } |
| printf("parsed SN = %s\n", snp); |
| env_set("SN", snp); |
| } else { /* old style format */ |
| unsigned char csum = 0; |
| |
| for (n = 0, bufp = buf + 32; n < 10; n++) |
| csum += bufp[n]; |
| |
| if (csum != bufp[n]) { |
| puts("Invalid serial number found!\n"); |
| ret = 1; |
| goto out_unmap; |
| } |
| bufp[n] = '\0'; |
| printf("parsed SN = %s\n", buf + 32); |
| env_set("SN", buf + 32); |
| } |
| out_unmap: |
| unmap_physmem(buf, len); |
| return ret; |
| } |
| |
| /* map bit position to function in POWER_MNG_CTRL_REG */ |
| static const char * const pwr_mng_bit_func[] = { |
| "audio", |
| "ge3", "ge2", "ge1", "ge0", |
| "pcie00", "pcie01", "pcie02", "pcie03", |
| "pcie10", "pcie11", "pcie12", "pcie13", |
| "bp", |
| "sata0_link", "sata0_core", |
| "lcd", |
| "sdio", |
| "usb0", "usb1", "usb2", |
| "idma", "xor0", "crypto", |
| NULL, |
| "tdm", |
| "pcie20", "pcie30", |
| "xor1", |
| "sata1_link", "sata1_core", |
| NULL, |
| }; |
| |
| static int do_syno_clk_gate(int argc, char *const argv[]) |
| { |
| u32 pwr_mng_ctrl_reg = reg_read(POWER_MNG_CTRL_REG); |
| const char *func, *state; |
| int i, val; |
| |
| if (argc < 2) |
| return -1; |
| |
| if (!strcmp(argv[1], "get")) { |
| puts("Clock Gating:\n"); |
| for (i = 0; i < 32; i++) { |
| func = pwr_mng_bit_func[i]; |
| if (!func) |
| continue; |
| state = pwr_mng_ctrl_reg & (1 << i) ? "ON" : "OFF"; |
| printf("%s:\t\t%s\n", func, state); |
| } |
| return 0; |
| } |
| if (argc < 4) |
| return -1; |
| if (!strcmp(argv[1], "set")) { |
| func = argv[2]; |
| state = argv[3]; |
| for (i = 0; i < 32; i++) { |
| if (!pwr_mng_bit_func[i]) |
| continue; |
| if (!strcmp(func, pwr_mng_bit_func[i])) |
| break; |
| } |
| if (i == 32) { |
| printf("Error: name '%s' not known\n", func); |
| return -1; |
| } |
| val = state[0] != '0'; |
| pwr_mng_ctrl_reg |= (val << i); |
| pwr_mng_ctrl_reg &= ~(!val << i); |
| reg_write(POWER_MNG_CTRL_REG, pwr_mng_ctrl_reg); |
| } |
| return 0; |
| } |
| |
| static int do_syno(struct cmd_tbl *cmdtp, int flag, int argc, |
| char *const argv[]) |
| { |
| const char *cmd; |
| int ret = 0; |
| |
| if (argc < 2) |
| goto usage; |
| |
| cmd = argv[1]; |
| --argc; |
| ++argv; |
| |
| if (!strcmp(cmd, "populate_env")) |
| ret = do_syno_populate(argc, argv); |
| else if (!strcmp(cmd, "clk_gate")) |
| ret = do_syno_clk_gate(argc, argv); |
| |
| if (ret != -1) |
| return ret; |
| usage: |
| return CMD_RET_USAGE; |
| } |
| |
| U_BOOT_CMD( |
| syno, 5, 1, do_syno, |
| "Synology specific commands", |
| "populate_env - Read vendor data from SPI flash into environment\n" |
| "clk_gate (get|set name 1|0) - Manage clock gating\n" |
| ); |