* Patch by Travis Sawyer, 09 Feb 2004:
o 440GX:
- Fix PCI Indirect access for type 1 config cycles with ppc440.
- Add phymode for 440 enet
- fix pci pre init
o XPedite1K:
- Change board_pre_init to board_early_init_f
- Add user flash to bus controller setup
- Fix pci pre init
- Fix is_pci_host to check GPIO for monarch bit
- Force xpedite1k to pci conventional mode (via #define option)
* Patch by Brad Kemp, 4 Feb 2004:
- handle the machine check that is generated during the PCI scans
on 82xx processors.
- define the registers used in the IMMR by the PCI subsystem.
* Patch by Pierre Aubert, 03 Feb 2004:
cpu/mpc5xxx/start.S: copy MBAR into SPR311
* Patch by Jeff Angielski, 03 Feb 2004:
Fix copy & paste error in cpu/mpc8260/pci.c
* Patch by Reinhard Meyer, 24 Jan 2004:
Fix typo in cpu/mpc5xxx/pci_mpc5200.c
diff --git a/cpu/mpc5xxx/pci_mpc5200.c b/cpu/mpc5xxx/pci_mpc5200.c
index 0c2114a..94c157f 100644
--- a/cpu/mpc5xxx/pci_mpc5200.c
+++ b/cpu/mpc5xxx/pci_mpc5200.c
@@ -115,7 +115,7 @@
/* Map MBAR to PCI space */
*(vu_long *)MPC5XXX_PCI_BAR0 = CFG_MBAR;
- *(vu_long *)MPC5XXX_PCI_TBATR1 = CFG_MBAR | 1;
+ *(vu_long *)MPC5XXX_PCI_TBATR0 = CFG_MBAR | 1;
/* Map RAM to PCI space */
*(vu_long *)MPC5XXX_PCI_BAR1 = CONFIG_PCI_MEMORY_BUS | (1 << 3);
diff --git a/cpu/mpc5xxx/start.S b/cpu/mpc5xxx/start.S
index 26811e1..6f0b269 100644
--- a/cpu/mpc5xxx/start.S
+++ b/cpu/mpc5xxx/start.S
@@ -145,6 +145,8 @@
lis r3, CFG_MBAR@h
ori r3, r3, CFG_MBAR@l
#if defined(CONFIG_MPC5200)
+ /* MBAR is mirrored into the MBAR SPR */
+ mtspr MBAR,r3
rlwinm r3, r3, 16, 16, 31
#endif
#if defined(CONFIG_MGT5100)
diff --git a/cpu/mpc8260/pci.c b/cpu/mpc8260/pci.c
index b3a89f5..dc077ed 100644
--- a/cpu/mpc8260/pci.c
+++ b/cpu/mpc8260/pci.c
@@ -28,28 +28,28 @@
#include <pci.h>
#include <mpc8260.h>
#include <asm/m8260_pci.h>
-
+#include <asm/io.h>
/*
- * Local->PCI map (from CPU) controlled by
+ * Local->PCI map (from CPU) controlled by
* MPC826x master window
*
- * 0x80000000 - 0xBFFFFFFF CPU2PCI space PCIBR0
- * 0xF4000000 - 0xF7FFFFFF CPU2PCI space PCIBR1
+ * 0x80000000 - 0xBFFFFFFF CPU2PCI space PCIBR0
+ * 0xF4000000 - 0xF7FFFFFF CPU2PCI space PCIBR1
*
- * 0x80000000 - 0x9FFFFFFF 0x80000000 - 0x9FFFFFFF (Outbound ATU #1)
- * PCI Mem with prefetch
+ * 0x80000000 - 0x9FFFFFFF 0x80000000 - 0x9FFFFFFF (Outbound ATU #1)
+ * PCI Mem with prefetch
*
- * 0xA0000000 - 0xBFFFFFFF 0xA0000000 - 0xBFFFFFFF (Outbound ATU #2)
- * PCI Mem w/o prefetch
+ * 0xA0000000 - 0xBFFFFFFF 0xA0000000 - 0xBFFFFFFF (Outbound ATU #2)
+ * PCI Mem w/o prefetch
*
- * 0xF4000000 - 0xF7FFFFFF 0x00000000 - 0x03FFFFFF (Outbound ATU #3)
- * 32-bit PCI IO
+ * 0xF4000000 - 0xF7FFFFFF 0x00000000 - 0x03FFFFFF (Outbound ATU #3)
+ * 32-bit PCI IO
*
* PCI->Local map (from PCI)
- * MPC826x slave window controlled by
+ * MPC826x slave window controlled by
*
- * 0x00000000 - 0x1FFFFFFF 0x00000000 - 0x1FFFFFFF (Inbound ATU #1)
- * MPC826x local memory
+ * 0x00000000 - 0x1FFFFFFF 0x00000000 - 0x1FFFFFFF (Inbound ATU #1)
+ * MPC826x local memory
*/
/*
@@ -58,13 +58,13 @@
*/
#ifndef CFG_PCI_SLV_MEM_LOCAL
-#define PCI_SLV_MEM_LOCAL CFG_SDRAM_BASE /* Local base */
+#define PCI_SLV_MEM_LOCAL CFG_SDRAM_BASE /* Local base */
#else
#define PCI_SLV_MEM_LOCAL CFG_PCI_SLV_MEM_LOCAL
#endif
#ifndef CFG_PCI_SLV_MEM_BUS
-#define PCI_SLV_MEM_BUS 0x00000000 /* PCI base */
+#define PCI_SLV_MEM_BUS 0x00000000 /* PCI base */
#else
#define PCI_SLV_MEM_BUS CFG_PCI_SLV_MEM_BUS
#endif
@@ -85,28 +85,28 @@
/* PCIBR0 */
#ifndef CFG_PCI_MSTR0_LOCAL
-#define PCI_MSTR0_LOCAL 0x80000000 /* Local base */
+#define PCI_MSTR0_LOCAL 0x80000000 /* Local base */
#else
#define PCI_MSTR0_LOCAL CFG_PCI_MSTR0_LOCAL
#endif
#ifndef CFG_PCIMSK0_MASK
-#define PCIMSK0_MASK PCIMSK_1GB /* Size of window */
+#define PCIMSK0_MASK PCIMSK_1GB /* Size of window */
#else
#define PCIMSK0_MASK CFG_PCIMSK0_MASK
#endif
/* PCIBR1 */
#ifndef CFG_PCI_MSTR1_LOCAL
-#define PCI_MSTR1_LOCAL 0xF4000000 /* Local base */
+#define PCI_MSTR1_LOCAL 0xF4000000 /* Local base */
#else
#define PCI_MSTR1_LOCAL CFG_PCI_MSTR1_LOCAL
#endif
#ifndef CFG_PCIMSK1_MASK
-#define PCIMSK1_MASK PCIMSK_64MB /* Size of window */
+#define PCIMSK1_MASK PCIMSK_64MB /* Size of window */
#else
-#define PCIMSK1_MASK CFG_PCIMSK1_MASK
+#define PCIMSK1_MASK CFG_PCIMSK1_MASK
#endif
/*
@@ -116,13 +116,13 @@
*/
#ifndef CFG_PCI_MSTR_MEM_LOCAL
-#define PCI_MSTR_MEM_LOCAL 0x80000000 /* Local base */
+#define PCI_MSTR_MEM_LOCAL 0x80000000 /* Local base */
#else
#define PCI_MSTR_MEM_LOCAL CFG_PCI_MSTR_MEM_LOCAL
#endif
#ifndef CFG_PCI_MSTR_MEM_BUS
-#define PCI_MSTR_MEM_BUS 0x80000000 /* PCI base */
+#define PCI_MSTR_MEM_BUS 0x80000000 /* PCI base */
#else
#define PCI_MSTR_MEM_BUS CFG_PCI_MSTR_MEM_BUS
#endif
@@ -134,7 +134,7 @@
#endif
#ifndef CFG_PCI_MSTR_MEM_SIZE
-#define PCI_MSTR_MEM_SIZE 0x10000000 /* 256MB */
+#define PCI_MSTR_MEM_SIZE 0x10000000 /* 256MB */
#else
#define PCI_MSTR_MEM_SIZE CFG_PCI_MSTR_MEM_SIZE
#endif
@@ -152,13 +152,13 @@
*/
#ifndef CFG_PCI_MSTR_MEMIO_LOCAL
-#define PCI_MSTR_MEMIO_LOCAL 0x90000000 /* Local base */
+#define PCI_MSTR_MEMIO_LOCAL 0x90000000 /* Local base */
#else
#define PCI_MSTR_MEMIO_LOCAL CFG_PCI_MSTR_MEMIO_LOCAL
#endif
#ifndef CFG_PCI_MSTR_MEMIO_BUS
-#define PCI_MSTR_MEMIO_BUS 0x90000000 /* PCI base */
+#define PCI_MSTR_MEMIO_BUS 0x90000000 /* PCI base */
#else
#define PCI_MSTR_MEMIO_BUS CFG_PCI_MSTR_MEMIO_BUS
#endif
@@ -170,13 +170,13 @@
#endif
#ifndef CFG_PCI_MSTR_MEMIO_SIZE
-#define PCI_MSTR_MEMIO_SIZE 0x10000000 /* 256 MB */
+#define PCI_MSTR_MEMIO_SIZE 0x10000000 /* 256 MB */
#else
#define PCI_MSTR_MEMIO_SIZE CFG_PCI_MSTR_MEMIO_SIZE
#endif
#ifndef CFG_POCMR1_MASK_ATTRIB
-#define POCMR1_MASK_ATTRIB (POCMR_MASK_512MB | POCMR_ENABLE)
+#define POCMR1_MASK_ATTRIB (POCMR_MASK_512MB | POCMR_ENABLE)
#else
#define POCMR1_MASK_ATTRIB CFG_POCMR1_MASK_ATTRIB
#endif
@@ -188,13 +188,13 @@
*/
#ifndef CFG_PCI_MSTR_IO_LOCAL
-#define PCI_MSTR_IO_LOCAL 0xA0000000 /* Local base */
+#define PCI_MSTR_IO_LOCAL 0xA0000000 /* Local base */
#else
#define PCI_MSTR_IO_LOCAL CFG_PCI_MSTR_IO_LOCAL
#endif
#ifndef CFG_PCI_MSTR_IO_BUS
-#define PCI_MSTR_IO_BUS 0xA0000000 /* PCI base */
+#define PCI_MSTR_IO_BUS 0xA0000000 /* PCI base */
#else
#define PCI_MSTR_IO_BUS CFG_PCI_MSTR_IO_BUS
#endif
@@ -206,13 +206,13 @@
#endif
#ifndef CFG_PCI_MSTR_IO_SIZE
-#define PCI_MSTR_IO_SIZE 0x10000000 /* 256MB */
+#define PCI_MSTR_IO_SIZE 0x10000000 /* 256MB */
#else
#define PCI_MSTR_IO_SIZE CFG_PCI_MSTR_IO_SIZE
#endif
#ifndef CFG_POCMR2_MASK_ATTRIB
-#define POCMR2_MASK_ATTRIB (POCMR_MASK_256MB | POCMR_ENABLE | POCMR_PCI_IO)
+#define POCMR2_MASK_ATTRIB (POCMR_MASK_256MB | POCMR_ENABLE | POCMR_PCI_IO)
#else
#define POCMR2_MASK_ATTRIB CFG_POCMR2_MASK_ATTRIB
#endif
@@ -223,193 +223,198 @@
#define PCI_CLASS_BRIDGE_CTLR 0x06
-static inline void pci_outl(u32 addr, u32 data)
+static inline void pci_outl (u32 addr, u32 data)
{
- *(volatile u32 *) addr = cpu_to_le32(data);
+ *(volatile u32 *) addr = cpu_to_le32 (data);
}
-void pci_mpc8250_init(struct pci_controller *hose)
+void pci_mpc8250_init (struct pci_controller *hose)
{
#ifdef CONFIG_MPC8266ADS
- DECLARE_GLOBAL_DATA_PTR;
+ DECLARE_GLOBAL_DATA_PTR;
#endif
- u16 tempShort;
- u32 immr_addr = CFG_IMMR;
- volatile immap_t *immap = (immap_t *) CFG_IMMR;
- pci_dev_t host_devno = PCI_BDF(0, 0, 0);
+ u16 tempShort;
+
+ volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ pci_dev_t host_devno = PCI_BDF (0, 0, 0);
- pci_setup_indirect(hose, CFG_IMMR + PCI_CFG_ADDR_REG,
- CFG_IMMR + PCI_CFG_DATA_REG);
+ pci_setup_indirect (hose, CFG_IMMR + PCI_CFG_ADDR_REG,
+ CFG_IMMR + PCI_CFG_DATA_REG);
- /*
- * Setting required to enable local bus for PCI (SIUMCR [LBPC]).
- */
+ /*
+ * Setting required to enable local bus for PCI (SIUMCR [LBPC]).
+ */
#ifdef CONFIG_MPC8266ADS
- immap->im_siu_conf.sc_siumcr = (immap->im_siu_conf.sc_siumcr & ~SIUMCR_LBPC11)
- | SIUMCR_LBPC01;
+ immap->im_siu_conf.sc_siumcr =
+ (immap->im_siu_conf.sc_siumcr & ~SIUMCR_LBPC11)
+ | SIUMCR_LBPC01;
#else
- /*
- * Setting required to enable IRQ1-IRQ7 (SIUMCR [DPPC]),
- * and local bus for PCI (SIUMCR [LBPC]).
- */
- immap->im_siu_conf.sc_siumcr = (immap->im_siu_conf.sc_siumcr &
- ~SIUMCR_LBPC11 &
+ /*
+ * Setting required to enable IRQ1-IRQ7 (SIUMCR [DPPC]),
+ * and local bus for PCI (SIUMCR [LBPC]).
+ */
+ immap->im_siu_conf.sc_siumcr = (immap->im_siu_conf.sc_siumcr &
+ ~SIUMCR_LBPC11 &
~SIUMCR_CS10PC11 &
- ~SIUMCR_LBPC11) |
- SIUMCR_LBPC01 |
- SIUMCR_CS10PC01 |
- SIUMCR_LBPC01;
+ ~SIUMCR_LBPC11) |
+ SIUMCR_LBPC01 |
+ SIUMCR_CS10PC01 |
+ SIUMCR_APPC10;
#endif
- /* Make PCI lowest priority */
- /* Each 4 bits is a device bus request and the MS 4bits
- is highest priority */
- /* Bus 4bit value
- --- ----------
- CPM high 0b0000
- CPM middle 0b0001
- CPM low 0b0010
- PCI reguest 0b0011
- Reserved 0b0100
- Reserved 0b0101
- Internal Core 0b0110
- External Master 1 0b0111
- External Master 2 0b1000
- External Master 3 0b1001
- The rest are reserved */
- immap->im_siu_conf.sc_ppc_alrh = 0x61207893;
+ /* Make PCI lowest priority */
+ /* Each 4 bits is a device bus request and the MS 4bits
+ is highest priority */
+ /* Bus 4bit value
+ --- ----------
+ CPM high 0b0000
+ CPM middle 0b0001
+ CPM low 0b0010
+ PCI reguest 0b0011
+ Reserved 0b0100
+ Reserved 0b0101
+ Internal Core 0b0110
+ External Master 1 0b0111
+ External Master 2 0b1000
+ External Master 3 0b1001
+ The rest are reserved */
+ immap->im_siu_conf.sc_ppc_alrh = 0x61207893;
- /* Park bus on core while modifying PCI Bus accesses */
- immap->im_siu_conf.sc_ppc_acr = 0x6;
+ /* Park bus on core while modifying PCI Bus accesses */
+ immap->im_siu_conf.sc_ppc_acr = 0x6;
- /*
- * Set up master windows that allow the CPU to access PCI space. These
- * windows are set up using the two SIU PCIBR registers.
- */
- *(volatile unsigned long*)(immr_addr + M8265_PCIMSK0) = PCIMSK0_MASK;
- *(volatile unsigned long*)(immr_addr + M8265_PCIBR0) =
- PCI_MSTR0_LOCAL | PCIBR_ENABLE;
+ /*
+ * Set up master windows that allow the CPU to access PCI space. These
+ * windows are set up using the two SIU PCIBR registers.
+ */
+ immap->im_memctl.memc_pcimsk0 = PCIMSK0_MASK;
+ immap->im_memctl.memc_pcibr0 = PCI_MSTR0_LOCAL | PCIBR_ENABLE;
#ifdef CONFIG_MPC8266ADS
- *(volatile unsigned long*)(immr_addr + M8265_PCIMSK1) = PCIMSK1_MASK;
- *(volatile unsigned long*)(immr_addr + M8265_PCIBR1) =
- PCI_MSTR1_LOCAL | PCIBR_ENABLE;
+ immap->im_memctl.memc_pcimsk0 = PCIMSK1_MASK;
+ immap->im_memctl.memc_pcibr0 = PCI_MSTR1_LOCAL | PCIBR_ENABLE;
#endif
- /* Release PCI RST (by default the PCI RST signal is held low) */
- pci_outl (immr_addr | PCI_GCR_REG, PCIGCR_PCI_BUS_EN);
+ /* Release PCI RST (by default the PCI RST signal is held low) */
+ immap->im_pci.pci_gcr = cpu_to_le32 (PCIGCR_PCI_BUS_EN);
- /* give it some time */
- {
+ /* give it some time */
+ {
#ifdef CONFIG_MPC8266ADS
/* Give the PCI cards more time to initialize before query
- This might be good for other boards also
- */
- int i;
- for (i = 0; i < 1000; ++i)
+ This might be good for other boards also
+ */
+ int i;
+
+ for (i = 0; i < 1000; ++i)
#endif
- udelay(1000);
- }
+ udelay (1000);
+ }
- /*
- * Set up master window that allows the CPU to access PCI Memory (prefetch)
- * space. This window is set up using the first set of Outbound ATU registers.
- */
- pci_outl (immr_addr | POTAR_REG0, PCI_MSTR_MEM_BUS >> 12); /* PCI base */
- pci_outl (immr_addr | POBAR_REG0, PCI_MSTR_MEM_LOCAL >> 12); /* Local base */
- pci_outl (immr_addr | POCMR_REG0, POCMR0_MASK_ATTRIB); /* Size & attribute */
+ /*
+ * Set up master window that allows the CPU to access PCI Memory (prefetch)
+ * space. This window is set up using the first set of Outbound ATU registers.
+ */
+ immap->im_pci.pci_potar0 = cpu_to_le32 (PCI_MSTR_MEM_BUS >> 12); /* PCI base */
+ immap->im_pci.pci_pobar0 = cpu_to_le32 (PCI_MSTR_MEM_LOCAL >> 12); /* Local base */
+ immap->im_pci.pci_pocmr0 = cpu_to_le32 (POCMR0_MASK_ATTRIB); /* Size & attribute */
- /*
- * Set up master window that allows the CPU to access PCI Memory (non-prefetch)
- * space. This window is set up using the second set of Outbound ATU registers.
- */
- pci_outl (immr_addr | POTAR_REG1, PCI_MSTR_MEMIO_BUS >> 12); /* PCI base */
- pci_outl (immr_addr | POBAR_REG1, PCI_MSTR_MEMIO_LOCAL >> 12); /* Local base */
- pci_outl (immr_addr | POCMR_REG1, POCMR1_MASK_ATTRIB); /* Size & attribute */
+ /*
+ * Set up master window that allows the CPU to access PCI Memory (non-prefetch)
+ * space. This window is set up using the second set of Outbound ATU registers.
+ */
+ immap->im_pci.pci_potar1 = cpu_to_le32 (PCI_MSTR_MEMIO_BUS >> 12); /* PCI base */
+ immap->im_pci.pci_pobar1 = cpu_to_le32 (PCI_MSTR_MEMIO_LOCAL >> 12); /* Local base */
+ immap->im_pci.pci_pocmr1 = cpu_to_le32 (POCMR1_MASK_ATTRIB); /* Size & attribute */
- /*
- * Set up master window that allows the CPU to access PCI IO space. This window
- * is set up using the third set of Outbound ATU registers.
- */
- pci_outl (immr_addr | POTAR_REG2, PCI_MSTR_IO_BUS >> 12); /* PCI base */
- pci_outl (immr_addr | POBAR_REG2, PCI_MSTR_IO_LOCAL >> 12); /* Local base */
- pci_outl (immr_addr | POCMR_REG2, POCMR2_MASK_ATTRIB); /* Size & attribute */
+ /*
+ * Set up master window that allows the CPU to access PCI IO space. This window
+ * is set up using the third set of Outbound ATU registers.
+ */
+ immap->im_pci.pci_potar2 = cpu_to_le32 (PCI_MSTR_IO_BUS >> 12); /* PCI base */
+ immap->im_pci.pci_pobar2 = cpu_to_le32 (PCI_MSTR_IO_LOCAL >> 12); /* Local base */
+ immap->im_pci.pci_pocmr2 = cpu_to_le32 (POCMR2_MASK_ATTRIB); /* Size & attribute */
- /*
- * Set up slave window that allows PCI masters to access MPC826x local memory.
- * This window is set up using the first set of Inbound ATU registers
- */
- pci_outl (immr_addr | PITAR_REG0, PCI_SLV_MEM_LOCAL >> 12); /* Local base */
- pci_outl (immr_addr | PIBAR_REG0, PCI_SLV_MEM_BUS >> 12); /* PCI base */
- pci_outl (immr_addr | PICMR_REG0, PICMR0_MASK_ATTRIB); /* Size & attribute */
+ /*
+ * Set up slave window that allows PCI masters to access MPC826x local memory.
+ * This window is set up using the first set of Inbound ATU registers
+ */
+ immap->im_pci.pci_pitar0 = cpu_to_le32 (PCI_SLV_MEM_LOCAL >> 12); /* PCI base */
+ immap->im_pci.pci_pibar0 = cpu_to_le32 (PCI_SLV_MEM_BUS >> 12); /* Local base */
+ immap->im_pci.pci_picmr0 = cpu_to_le32 (PICMR0_MASK_ATTRIB); /* Size & attribute */
- /* See above for description - puts PCI request as highest priority */
- immap->im_siu_conf.sc_ppc_alrh = 0x03124567;
+ /* See above for description - puts PCI request as highest priority */
+ immap->im_siu_conf.sc_ppc_alrh = 0x03124567;
- /* Park the bus on the PCI */
- immap->im_siu_conf.sc_ppc_acr = PPC_ACR_BUS_PARK_PCI;
+ /* Park the bus on the PCI */
+ immap->im_siu_conf.sc_ppc_acr = PPC_ACR_BUS_PARK_PCI;
- /* Host mode - specify the bridge as a host-PCI bridge */
+ /* Host mode - specify the bridge as a host-PCI bridge */
- pci_hose_write_config_byte(hose, host_devno, PCI_CLASS_CODE,
- PCI_CLASS_BRIDGE_CTLR);
+ pci_hose_write_config_byte (hose, host_devno, PCI_CLASS_CODE,
+ PCI_CLASS_BRIDGE_CTLR);
- /* Enable the host bridge to be a master on the PCI bus, and to act as a PCI memory target */
- pci_hose_read_config_word(hose, host_devno, PCI_COMMAND, &tempShort);
- pci_hose_write_config_word(hose, host_devno, PCI_COMMAND,
- tempShort | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
+ /* Enable the host bridge to be a master on the PCI bus, and to act as a PCI memory target */
+ pci_hose_read_config_word (hose, host_devno, PCI_COMMAND, &tempShort);
+ pci_hose_write_config_word (hose, host_devno, PCI_COMMAND,
+ tempShort | PCI_COMMAND_MASTER |
+ PCI_COMMAND_MEMORY);
-#ifdef CONFIG_MPC8266ADS
/* do some bridge init, should be done on all 8260 based bridges */
- pci_hose_write_config_byte(hose, host_devno, PCI_CACHE_LINE_SIZE, 0x08);
- pci_hose_write_config_byte(hose, host_devno, PCI_LATENCY_TIMER, 0xF8);
-#endif
+ pci_hose_write_config_byte (hose, host_devno, PCI_CACHE_LINE_SIZE,
+ 0x08);
+ pci_hose_write_config_byte (hose, host_devno, PCI_LATENCY_TIMER,
+ 0xF8);
- hose->first_busno = 0;
- hose->last_busno = 0xff;
+ hose->first_busno = 0;
+ hose->last_busno = 0xff;
- /* System memory space */
+ /* System memory space */
#ifdef CONFIG_MPC8266ADS
- pci_set_region(hose->regions + 0,
- PCI_SLV_MEM_BUS,
- PCI_SLV_MEM_LOCAL,
- gd->ram_size,
- PCI_REGION_MEM | PCI_REGION_MEMORY);
+ pci_set_region (hose->regions + 0,
+ PCI_SLV_MEM_BUS,
+ PCI_SLV_MEM_LOCAL,
+ gd->ram_size, PCI_REGION_MEM | PCI_REGION_MEMORY);
#else
- pci_set_region(hose->regions + 0,
- CFG_SDRAM_BASE,
- CFG_SDRAM_BASE,
- 0x4000000,
- PCI_REGION_MEM | PCI_REGION_MEMORY);
+ pci_set_region (hose->regions + 0,
+ CFG_SDRAM_BASE,
+ CFG_SDRAM_BASE,
+ 0x4000000, PCI_REGION_MEM | PCI_REGION_MEMORY);
#endif
- /* PCI memory space */
+ /* PCI memory space */
#ifdef CONFIG_MPC8266ADS
- pci_set_region(hose->regions + 1,
- PCI_MSTR_MEMIO_BUS,
- PCI_MSTR_MEMIO_LOCAL,
- PCI_MSTR_MEMIO_SIZE,
- PCI_REGION_MEM);
+ pci_set_region (hose->regions + 1,
+ PCI_MSTR_MEMIO_BUS,
+ PCI_MSTR_MEMIO_LOCAL,
+ PCI_MSTR_MEMIO_SIZE, PCI_REGION_MEM);
#else
- pci_set_region(hose->regions + 1,
- PCI_MSTR_MEM_BUS,
- PCI_MSTR_MEM_LOCAL,
- PCI_MSTR_MEM_SIZE,
- PCI_REGION_MEM);
+ pci_set_region (hose->regions + 1,
+ PCI_MSTR_MEM_BUS,
+ PCI_MSTR_MEM_LOCAL,
+ PCI_MSTR_MEM_SIZE, PCI_REGION_MEM);
#endif
+ /* PCI I/O space */
+ pci_set_region (hose->regions + 2,
+ PCI_MSTR_IO_BUS,
+ PCI_MSTR_IO_LOCAL, PCI_MSTR_IO_SIZE, PCI_REGION_IO);
+
- /* PCI I/O space */
- pci_set_region(hose->regions + 2,
- PCI_MSTR_IO_BUS,
- PCI_MSTR_IO_LOCAL,
- PCI_MSTR_IO_SIZE,
- PCI_REGION_IO);
+ hose->region_count = 3;
- hose->region_count = 3;
+ pci_register_hose (hose);
+ /* Mask off master abort machine checks */
+ immap->im_pci.pci_emr &= cpu_to_le32 (~PCI_ERROR_PCI_NO_RSP);
+ eieio ();
- pci_register_hose(hose);
+ hose->last_busno = pci_hose_scan (hose);
- hose->last_busno = pci_hose_scan(hose);
+
+ /* clear the error in the error status register */
+ immap->im_pci.pci_esr = cpu_to_le32 (PCI_ERROR_PCI_NO_RSP);
+
+ /* unmask master abort machine checks */
+ immap->im_pci.pci_emr |= cpu_to_le32 (PCI_ERROR_PCI_NO_RSP);
}
-#endif /* CONFIG_PCI */
+#endif /* CONFIG_PCI */
diff --git a/cpu/mpc8260/traps.c b/cpu/mpc8260/traps.c
index a7f6f7e..deab808 100644
--- a/cpu/mpc8260/traps.c
+++ b/cpu/mpc8260/traps.c
@@ -35,6 +35,7 @@
#include <common.h>
#include <command.h>
#include <asm/processor.h>
+#include <asm/m8260_pci.h>
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
int (*debugger_exception_handler)(struct pt_regs *) = 0;
@@ -86,14 +87,12 @@
printf("\n");
for (i = 0; i < 32; i++) {
- if ((i % 8) == 0)
- {
+ if ((i % 8) == 0) {
printf("GPR%02d: ", i);
}
printf("%08lX ", regs->gpr[i]);
- if ((i % 8) == 7)
- {
+ if ((i % 8) == 7) {
printf("\n");
}
}
@@ -108,6 +107,24 @@
panic("Exception in kernel pc %lx signal %d",regs->nip,signr);
}
+#ifdef CONFIG_PCI
+void dump_pci (void)
+{
+
+ volatile immap_t *immap = (immap_t *) CFG_IMMR;
+
+ printf ("PCI: err status %x err mask %x err ctrl %x\n",
+ le32_to_cpu (immap->im_pci.pci_esr),
+ le32_to_cpu (immap->im_pci.pci_emr),
+ le32_to_cpu (immap->im_pci.pci_ecr));
+ printf (" error address %x error data %x ctrl %x\n",
+ le32_to_cpu (immap->im_pci.pci_eacr),
+ le32_to_cpu (immap->im_pci.pci_edcr),
+ le32_to_cpu (immap->im_pci.pci_eccr));
+
+}
+#endif
+
void
MachineCheckException(struct pt_regs *regs)
{
@@ -117,6 +134,17 @@
* when a device is not present. Catch it and return to
* the PCI exception handler.
*/
+#ifdef CONFIG_PCI
+ volatile immap_t *immap = (immap_t *)CFG_IMMR;
+#ifdef DEBUG
+ dump_pci();
+#endif
+ /* clear the error in the error status register */
+ if(immap->im_pci.pci_esr && cpu_to_le32(PCI_ERROR_PCI_NO_RSP)) {
+ immap->im_pci.pci_esr = cpu_to_le32(PCI_ERROR_PCI_NO_RSP);
+ return;
+ }
+#endif
if ((fixup = search_exception_table(regs->nip)) != 0) {
regs->nip = fixup;
return;
@@ -130,8 +158,7 @@
printf("Machine check in kernel mode.\n");
printf("Caused by (from msr): ");
printf("regs %p ",regs);
- switch( regs->msr & 0x0000F000)
- {
+ switch( regs->msr & 0x0000F000) {
case (1<<12) :
printf("Machine check signal - probably due to mm fault\n"
"with mmu off\n");
@@ -150,6 +177,9 @@
}
show_regs(regs);
print_backtrace((unsigned long *)regs->gpr[1]);
+#ifdef CONFIG_PCI
+ dump_pci();
+#endif
panic("machine check");
}
diff --git a/cpu/ppc4xx/405gp_pci.c b/cpu/ppc4xx/405gp_pci.c
index d3f6b23..c9e2e9c 100644
--- a/cpu/ppc4xx/405gp_pci.c
+++ b/cpu/ppc4xx/405gp_pci.c
@@ -411,15 +411,23 @@
/*--------------------------------------------------------------------------+
* The PCI initialization sequence enable bit must be set ... if not abort
- * pci setup since updating the bit requires chip reset.
+ * pci setup since updating the bit requires chip reset.
*--------------------------------------------------------------------------*/
- strap = mfdcr(cpc0_strp1);
- if( (strap & 0x00040000) == 0 ){
- printf("PCI: CPC0_STRP1[PISE] not set.\n");
- printf("PCI: Configuration aborted.\n");
- return;
- }
-
+#if defined (CONFIG_440_GX)
+ mfsdr(sdr_sdstp1,strap);
+ if ( (strap & 0x00010000) == 0 ){
+ printf("PCI: SDR0_STRP1[PISE] not set.\n");
+ printf("PCI: Configuration aborted.\n");
+ return;
+ }
+#else
+ strap = mfdcr(cpc0_strp1);
+ if( (strap & 0x00040000) == 0 ){
+ printf("PCI: CPC0_STRP1[PISE] not set.\n");
+ printf("PCI: Configuration aborted.\n");
+ return;
+ }
+#endif
/*--------------------------------------------------------------------------+
* PCI controller init
*--------------------------------------------------------------------------*/
@@ -463,8 +471,13 @@
out16r( PCIX0_CLS, 0x00060000 ); /* Bridge, host bridge */
#endif
- out32r( PCIX0_BRDGOPT1, 0x10000060 ); /* PLB Rq pri highest */
- out32r( PCIX0_BRDGOPT2, in32(PCIX0_BRDGOPT2) | 1 ); /* Enable host config */
+#if defined(CONFIG_440_GX)
+ out32r( PCIX0_BRDGOPT1, 0x04000060 ); /* PLB Rq pri highest */
+ out32r( PCIX0_BRDGOPT2, in32(PCIX0_BRDGOPT2) | 0x83 ); /* Enable host config, clear Timeout, ensure int src1 */
+#else
+ out32r( PCIX0_BRDGOPT1, 0x10000060 ); /* PLB Rq pri highest */
+ out32r( PCIX0_BRDGOPT2, in32(PCIX0_BRDGOPT2) | 1 ); /* Enable host config */
+#endif
/*--------------------------------------------------------------------------+
* PCI master init: default is one 256MB region for PCI memory:
diff --git a/cpu/ppc4xx/440gx_enet.c b/cpu/ppc4xx/440gx_enet.c
index 617a174..4502085 100644
--- a/cpu/ppc4xx/440gx_enet.c
+++ b/cpu/ppc4xx/440gx_enet.c
@@ -116,6 +116,10 @@
#undef INFO_440_ENET
+#define BI_PHYMODE_NONE 0
+#define BI_PHYMODE_ZMII 1
+#define BI_PHYMODE_RGMII 2
+
/*-----------------------------------------------------------------------------+
* Global variables. TX and RX descriptors and buffers.
*-----------------------------------------------------------------------------*/
@@ -316,11 +320,12 @@
break;
}
+ bis->bi_phynum[devnum] = reg;
+
/* Reset the phy */
miiphy_reset (reg);
/* Start/Restart autonegotiation */
-/* miiphy_write(reg, PHY_BMCR, 0x9340); */
phy_setup_aneg (reg);
udelay (1000);
@@ -579,13 +584,6 @@
irq_install_handler (VECNUM_ETH0 + (hw_p->devnum * 2),
(interrupt_handler_t *) enetInt, dev);
}
-#if 0 /* done by irq_install_handler */
- /* set up interrupt handler */
- /* setup interrupt controller to take interrupts from the MAL &
- EMAC */
- mtdcr (uicsr, 0xffffffff); /* clear pending interrupts */
- mtdcr (uicer, mfdcr (uicer) | MAL_UIC_DEF | EMAC_UIC_DEF);
-#endif
mtmsr (msr); /* enable interrupts again */
@@ -1027,33 +1025,49 @@
pfc1 &= ~(0x01e00000);
pfc1 |= 0x01200000;
mtsdr (sdr_pfc1, pfc1);
+ /* set phy num and mode */
+ bis->bi_phynum[0] = CONFIG_PHY_ADDR;
+ bis->bi_phynum[1] = CONFIG_PHY1_ADDR;
+ bis->bi_phynum[2] = CONFIG_PHY2_ADDR;
+ bis->bi_phynum[3] = CONFIG_PHY3_ADDR;
+ bis->bi_phymode[0] = 0;
+ bis->bi_phymode[1] = 0;
+ bis->bi_phymode[2] = 2;
+ bis->bi_phymode[3] = 2;
for (eth_num = 0; eth_num < EMAC_NUM_DEV; eth_num++) {
/* See if we can actually bring up the interface, otherwise, skip it */
switch (eth_num) {
case 0:
- if (memcmp (bis->bi_enetaddr, "\0\0\0\0\0\0", 6) == 0)
+ if (memcmp (bis->bi_enetaddr, "\0\0\0\0\0\0", 6) == 0) {
+ bis->bi_phymode[eth_num] = BI_PHYMODE_NONE;
continue;
+ }
break;
case 1:
- if (memcmp (bis->bi_enet1addr, "\0\0\0\0\0\0", 6) ==
- 0)
+ if (memcmp (bis->bi_enet1addr, "\0\0\0\0\0\0", 6) == 0) {
+ bis->bi_phymode[eth_num] = BI_PHYMODE_NONE;
continue;
+ }
break;
case 2:
- if (memcmp (bis->bi_enet2addr, "\0\0\0\0\0\0", 6) ==
- 0)
+ if (memcmp (bis->bi_enet2addr, "\0\0\0\0\0\0", 6) == 0) {
+ bis->bi_phymode[eth_num] = BI_PHYMODE_NONE;
continue;
+ }
break;
case 3:
- if (memcmp (bis->bi_enet3addr, "\0\0\0\0\0\0", 6) ==
- 0)
+ if (memcmp (bis->bi_enet3addr, "\0\0\0\0\0\0", 6) == 0) {
+ bis->bi_phymode[eth_num] = BI_PHYMODE_NONE;
continue;
+ }
break;
default:
- if (memcmp (bis->bi_enetaddr, "\0\0\0\0\0\0", 6) == 0)
+ if (memcmp (bis->bi_enetaddr, "\0\0\0\0\0\0", 6) == 0) {
+ bis->bi_phymode[eth_num] = BI_PHYMODE_NONE;
continue;
+ }
break;
}