| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2016 Nexell Co., Ltd. |
| * |
| * Author: junghyun, kim <jhkim@nexell.co.kr> |
| */ |
| |
| #include <config.h> |
| #include <common.h> |
| #include <errno.h> |
| |
| #include <asm/arch/nexell.h> |
| #include <asm/arch/tieoff.h> |
| #include <asm/arch/reset.h> |
| #include <asm/arch/display.h> |
| |
| #include "soc/s5pxx18_soc_mipi.h" |
| #include "soc/s5pxx18_soc_disptop.h" |
| #include "soc/s5pxx18_soc_disptop_clk.h" |
| |
| #define PLLPMS_1000MHZ 0x33E8 |
| #define BANDCTL_1000MHZ 0xF |
| #define PLLPMS_960MHZ 0x2280 |
| #define BANDCTL_960MHZ 0xF |
| #define PLLPMS_900MHZ 0x2258 |
| #define BANDCTL_900MHZ 0xE |
| #define PLLPMS_840MHZ 0x2230 |
| #define BANDCTL_840MHZ 0xD |
| #define PLLPMS_750MHZ 0x43E8 |
| #define BANDCTL_750MHZ 0xC |
| #define PLLPMS_660MHZ 0x21B8 |
| #define BANDCTL_660MHZ 0xB |
| #define PLLPMS_600MHZ 0x2190 |
| #define BANDCTL_600MHZ 0xA |
| #define PLLPMS_540MHZ 0x2168 |
| #define BANDCTL_540MHZ 0x9 |
| #define PLLPMS_512MHZ 0x03200 |
| #define BANDCTL_512MHZ 0x9 |
| #define PLLPMS_480MHZ 0x2281 |
| #define BANDCTL_480MHZ 0x8 |
| #define PLLPMS_420MHZ 0x2231 |
| #define BANDCTL_420MHZ 0x7 |
| #define PLLPMS_402MHZ 0x2219 |
| #define BANDCTL_402MHZ 0x7 |
| #define PLLPMS_330MHZ 0x21B9 |
| #define BANDCTL_330MHZ 0x6 |
| #define PLLPMS_300MHZ 0x2191 |
| #define BANDCTL_300MHZ 0x5 |
| #define PLLPMS_210MHZ 0x2232 |
| #define BANDCTL_210MHZ 0x4 |
| #define PLLPMS_180MHZ 0x21E2 |
| #define BANDCTL_180MHZ 0x3 |
| #define PLLPMS_150MHZ 0x2192 |
| #define BANDCTL_150MHZ 0x2 |
| #define PLLPMS_100MHZ 0x3323 |
| #define BANDCTL_100MHZ 0x1 |
| #define PLLPMS_80MHZ 0x3283 |
| #define BANDCTL_80MHZ 0x0 |
| |
| #define MIPI_INDEX 0 |
| #define MIPI_EXC_PRE_VALUE 1 |
| #define MIPI_DSI_IRQ_MASK 29 |
| |
| #define __io_address(a) (void *)(uintptr_t)(a) |
| |
| struct mipi_xfer_msg { |
| u8 id, data[2]; |
| u16 flags; |
| const u8 *tx_buf; |
| u16 tx_len; |
| u8 *rx_buf; |
| u16 rx_len; |
| }; |
| |
| static void mipi_reset(void) |
| { |
| /* tieoff */ |
| nx_tieoff_set(NX_TIEOFF_MIPI0_NX_DPSRAM_1R1W_EMAA, 3); |
| nx_tieoff_set(NX_TIEOFF_MIPI0_NX_DPSRAM_1R1W_EMAB, 3); |
| |
| /* reset */ |
| nx_rstcon_setrst(RESET_ID_MIPI, RSTCON_ASSERT); |
| nx_rstcon_setrst(RESET_ID_MIPI_DSI, RSTCON_ASSERT); |
| nx_rstcon_setrst(RESET_ID_MIPI_CSI, RSTCON_ASSERT); |
| nx_rstcon_setrst(RESET_ID_MIPI_PHY_S, RSTCON_ASSERT); |
| nx_rstcon_setrst(RESET_ID_MIPI_PHY_M, RSTCON_ASSERT); |
| |
| nx_rstcon_setrst(RESET_ID_MIPI, RSTCON_NEGATE); |
| nx_rstcon_setrst(RESET_ID_MIPI_DSI, RSTCON_NEGATE); |
| nx_rstcon_setrst(RESET_ID_MIPI_PHY_S, RSTCON_NEGATE); |
| nx_rstcon_setrst(RESET_ID_MIPI_PHY_M, RSTCON_NEGATE); |
| } |
| |
| static void mipi_init(void) |
| { |
| int clkid = DP_CLOCK_MIPI; |
| void *base; |
| |
| /* |
| * neet to reset before open |
| */ |
| mipi_reset(); |
| |
| base = __io_address(nx_disp_top_clkgen_get_physical_address(clkid)); |
| nx_disp_top_clkgen_set_base_address(clkid, base); |
| nx_disp_top_clkgen_set_clock_pclk_mode(clkid, nx_pclkmode_always); |
| |
| base = __io_address(nx_mipi_get_physical_address(0)); |
| nx_mipi_set_base_address(0, base); |
| } |
| |
| static int mipi_get_phy_pll(int bitrate, unsigned int *pllpms, |
| unsigned int *bandctl) |
| { |
| unsigned int pms, ctl; |
| |
| switch (bitrate) { |
| case 1000: |
| pms = PLLPMS_1000MHZ; |
| ctl = BANDCTL_1000MHZ; |
| break; |
| case 960: |
| pms = PLLPMS_960MHZ; |
| ctl = BANDCTL_960MHZ; |
| break; |
| case 900: |
| pms = PLLPMS_900MHZ; |
| ctl = BANDCTL_900MHZ; |
| break; |
| case 840: |
| pms = PLLPMS_840MHZ; |
| ctl = BANDCTL_840MHZ; |
| break; |
| case 750: |
| pms = PLLPMS_750MHZ; |
| ctl = BANDCTL_750MHZ; |
| break; |
| case 660: |
| pms = PLLPMS_660MHZ; |
| ctl = BANDCTL_660MHZ; |
| break; |
| case 600: |
| pms = PLLPMS_600MHZ; |
| ctl = BANDCTL_600MHZ; |
| break; |
| case 540: |
| pms = PLLPMS_540MHZ; |
| ctl = BANDCTL_540MHZ; |
| break; |
| case 512: |
| pms = PLLPMS_512MHZ; |
| ctl = BANDCTL_512MHZ; |
| break; |
| case 480: |
| pms = PLLPMS_480MHZ; |
| ctl = BANDCTL_480MHZ; |
| break; |
| case 420: |
| pms = PLLPMS_420MHZ; |
| ctl = BANDCTL_420MHZ; |
| break; |
| case 402: |
| pms = PLLPMS_402MHZ; |
| ctl = BANDCTL_402MHZ; |
| break; |
| case 330: |
| pms = PLLPMS_330MHZ; |
| ctl = BANDCTL_330MHZ; |
| break; |
| case 300: |
| pms = PLLPMS_300MHZ; |
| ctl = BANDCTL_300MHZ; |
| break; |
| case 210: |
| pms = PLLPMS_210MHZ; |
| ctl = BANDCTL_210MHZ; |
| break; |
| case 180: |
| pms = PLLPMS_180MHZ; |
| ctl = BANDCTL_180MHZ; |
| break; |
| case 150: |
| pms = PLLPMS_150MHZ; |
| ctl = BANDCTL_150MHZ; |
| break; |
| case 100: |
| pms = PLLPMS_100MHZ; |
| ctl = BANDCTL_100MHZ; |
| break; |
| case 80: |
| pms = PLLPMS_80MHZ; |
| ctl = BANDCTL_80MHZ; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| *pllpms = pms; |
| *bandctl = ctl; |
| |
| return 0; |
| } |
| |
| static int mipi_prepare(int module, int input, |
| struct dp_sync_info *sync, struct dp_ctrl_info *ctrl, |
| struct dp_mipi_dev *mipi) |
| { |
| int index = MIPI_INDEX; |
| u32 esc_pre_value = MIPI_EXC_PRE_VALUE; |
| int lpm = mipi->lpm_trans; |
| int ret = 0; |
| |
| ret = mipi_get_phy_pll(mipi->hs_bitrate, |
| &mipi->hs_pllpms, &mipi->hs_bandctl); |
| if (ret < 0) |
| return ret; |
| |
| ret = mipi_get_phy_pll(mipi->lp_bitrate, |
| &mipi->lp_pllpms, &mipi->lp_bandctl); |
| if (ret < 0) |
| return ret; |
| |
| debug("%s: mipi lp:%dmhz:0x%x:0x%x, hs:%dmhz:0x%x:0x%x, %s trans\n", |
| __func__, mipi->lp_bitrate, mipi->lp_pllpms, mipi->lp_bandctl, |
| mipi->hs_bitrate, mipi->hs_pllpms, mipi->hs_bandctl, |
| lpm ? "low" : "high"); |
| |
| if (lpm) |
| nx_mipi_dsi_set_pll(index, 1, 0xFFFFFFFF, |
| mipi->lp_pllpms, mipi->lp_bandctl, 0, 0); |
| else |
| nx_mipi_dsi_set_pll(index, 1, 0xFFFFFFFF, |
| mipi->hs_pllpms, mipi->hs_bandctl, 0, 0); |
| |
| #ifdef CONFIG_ARCH_S5P4418 |
| /* |
| * disable the escape clock generating prescaler |
| * before soft reset. |
| */ |
| nx_mipi_dsi_set_clock(index, 0, 0, 1, 1, 1, 0, 0, 0, 0, 10); |
| mdelay(1); |
| #endif |
| |
| nx_mipi_dsi_software_reset(index); |
| nx_mipi_dsi_set_clock(index, 0, 0, 1, 1, 1, 0, 0, 0, 1, esc_pre_value); |
| nx_mipi_dsi_set_phy(index, 0, 1, 1, 0, 0, 0, 0, 0); |
| |
| if (lpm) |
| nx_mipi_dsi_set_escape_lp(index, nx_mipi_dsi_lpmode_lp, |
| nx_mipi_dsi_lpmode_lp); |
| else |
| nx_mipi_dsi_set_escape_lp(index, nx_mipi_dsi_lpmode_hs, |
| nx_mipi_dsi_lpmode_hs); |
| mdelay(20); |
| |
| return 0; |
| } |
| |
| static int mipi_enable(int module, int input, |
| struct dp_sync_info *sync, struct dp_ctrl_info *ctrl, |
| struct dp_mipi_dev *mipi) |
| { |
| struct mipi_dsi_device *dsi = &mipi->dsi; |
| int clkid = DP_CLOCK_MIPI; |
| int index = MIPI_INDEX; |
| int width = sync->h_active_len; |
| int height = sync->v_active_len; |
| int HFP = sync->h_front_porch; |
| int HBP = sync->h_back_porch; |
| int HS = sync->h_sync_width; |
| int VFP = sync->v_front_porch; |
| int VBP = sync->v_back_porch; |
| int VS = sync->v_sync_width; |
| int en_prescaler = 1; |
| u32 esc_pre_value = MIPI_EXC_PRE_VALUE; |
| |
| int txhsclock = 1; |
| int lpm = mipi->lpm_trans; |
| bool command_mode = mipi->command_mode; |
| |
| enum nx_mipi_dsi_format dsi_format; |
| int data_len = dsi->lanes - 1; |
| bool burst = dsi->mode_flags & MIPI_DSI_MODE_VIDEO_BURST ? true : false; |
| bool eot_enable = dsi->mode_flags & MIPI_DSI_MODE_EOT_PACKET ? |
| false : true; |
| |
| /* |
| * disable the escape clock generating prescaler |
| * before soft reset. |
| */ |
| #ifdef CONFIG_ARCH_S5P4418 |
| en_prescaler = 0; |
| #endif |
| |
| debug("%s: mode:%s, lanes.%d\n", __func__, |
| command_mode ? "command" : "video", data_len + 1); |
| |
| if (lpm) |
| nx_mipi_dsi_set_escape_lp(index, |
| nx_mipi_dsi_lpmode_hs, |
| nx_mipi_dsi_lpmode_hs); |
| |
| nx_mipi_dsi_set_pll(index, 1, 0xFFFFFFFF, |
| mipi->hs_pllpms, mipi->hs_bandctl, 0, 0); |
| mdelay(1); |
| |
| nx_mipi_dsi_set_clock(index, 0, 0, 1, 1, 1, 0, 0, 0, en_prescaler, 10); |
| mdelay(1); |
| |
| nx_mipi_dsi_software_reset(index); |
| nx_mipi_dsi_set_clock(index, txhsclock, 0, 1, |
| 1, 1, 0, 0, 0, 1, esc_pre_value); |
| |
| switch (data_len) { |
| case 0: /* 1 lane */ |
| nx_mipi_dsi_set_phy(index, data_len, 1, 1, 0, 0, 0, 0, 0); |
| break; |
| case 1: /* 2 lane */ |
| nx_mipi_dsi_set_phy(index, data_len, 1, 1, 1, 0, 0, 0, 0); |
| break; |
| case 2: /* 3 lane */ |
| nx_mipi_dsi_set_phy(index, data_len, 1, 1, 1, 1, 0, 0, 0); |
| break; |
| case 3: /* 3 lane */ |
| nx_mipi_dsi_set_phy(index, data_len, 1, 1, 1, 1, 1, 0, 0); |
| break; |
| default: |
| printf("%s: not support data lanes %d\n", |
| __func__, data_len + 1); |
| return -EINVAL; |
| } |
| |
| switch (dsi->format) { |
| case MIPI_DSI_FMT_RGB565: |
| dsi_format = nx_mipi_dsi_format_rgb565; |
| break; |
| case MIPI_DSI_FMT_RGB666: |
| dsi_format = nx_mipi_dsi_format_rgb666; |
| break; |
| case MIPI_DSI_FMT_RGB666_PACKED: |
| dsi_format = nx_mipi_dsi_format_rgb666_packed; |
| break; |
| case MIPI_DSI_FMT_RGB888: |
| dsi_format = nx_mipi_dsi_format_rgb888; |
| break; |
| default: |
| printf("%s: not support format %d\n", __func__, dsi->format); |
| return -EINVAL; |
| } |
| |
| nx_mipi_dsi_set_config_video_mode(index, 1, 0, burst, |
| nx_mipi_dsi_syncmode_event, |
| eot_enable, 1, 1, 1, 1, 0, dsi_format, |
| HFP, HBP, HS, VFP, VBP, VS, 0); |
| |
| nx_mipi_dsi_set_size(index, width, height); |
| |
| /* set mux */ |
| nx_disp_top_set_mipimux(1, module); |
| |
| /* 0 is spdif, 1 is mipi vclk */ |
| nx_disp_top_clkgen_set_clock_source(clkid, 1, ctrl->clk_src_lv0); |
| nx_disp_top_clkgen_set_clock_divisor(clkid, 1, |
| ctrl->clk_div_lv1 * |
| ctrl->clk_div_lv0); |
| |
| /* SPDIF and MIPI */ |
| nx_disp_top_clkgen_set_clock_divisor_enable(clkid, 1); |
| |
| /* START: CLKGEN, MIPI is started in setup function */ |
| nx_disp_top_clkgen_set_clock_divisor_enable(clkid, true); |
| nx_mipi_dsi_set_enable(index, true); |
| |
| return 0; |
| } |
| |
| static int nx_mipi_transfer_tx(struct mipi_dsi_device *dsi, |
| struct mipi_xfer_msg *xfer) |
| { |
| const u8 *txb; |
| int size, index = 0; |
| u32 data; |
| |
| if (xfer->tx_len > DSI_TX_FIFO_SIZE) |
| printf("warn: tx %d size over fifo %d\n", |
| (int)xfer->tx_len, DSI_TX_FIFO_SIZE); |
| |
| /* write payload */ |
| size = xfer->tx_len; |
| txb = xfer->tx_buf; |
| |
| while (size >= 4) { |
| data = (txb[3] << 24) | (txb[2] << 16) | |
| (txb[1] << 8) | (txb[0]); |
| nx_mipi_dsi_write_payload(index, data); |
| txb += 4, size -= 4; |
| data = 0; |
| } |
| |
| switch (size) { |
| case 3: |
| data |= txb[2] << 16; |
| case 2: |
| data |= txb[1] << 8; |
| case 1: |
| data |= txb[0]; |
| nx_mipi_dsi_write_payload(index, data); |
| break; |
| case 0: |
| break; /* no payload */ |
| } |
| |
| /* write packet hdr */ |
| data = (xfer->data[1] << 16) | (xfer->data[0] << 8) | xfer->id; |
| |
| nx_mipi_dsi_write_pkheader(index, data); |
| |
| return 0; |
| } |
| |
| static int nx_mipi_transfer_done(struct mipi_dsi_device *dsi) |
| { |
| int index = 0, count = 100; |
| u32 value; |
| |
| do { |
| mdelay(1); |
| value = nx_mipi_dsi_read_fifo_status(index); |
| if (((1 << 22) & value)) |
| break; |
| } while (count-- > 0); |
| |
| if (count < 0) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| static int nx_mipi_transfer_rx(struct mipi_dsi_device *dsi, |
| struct mipi_xfer_msg *xfer) |
| { |
| u8 *rxb = xfer->rx_buf; |
| int index = 0, rx_len = 0; |
| u32 data, count = 0; |
| u16 size; |
| int err = -EINVAL; |
| |
| nx_mipi_dsi_clear_interrupt_pending(index, 18); |
| |
| while (1) { |
| /* Completes receiving data. */ |
| if (nx_mipi_dsi_get_interrupt_pending(index, 18)) |
| break; |
| |
| mdelay(1); |
| |
| if (count > 500) { |
| printf("%s: error recevice data\n", __func__); |
| err = -EINVAL; |
| goto clear_fifo; |
| } else { |
| count++; |
| } |
| } |
| |
| data = nx_mipi_dsi_read_fifo(index); |
| |
| switch (data & 0x3f) { |
| case MIPI_DSI_RX_GENERIC_SHORT_READ_RESPONSE_2BYTE: |
| case MIPI_DSI_RX_DCS_SHORT_READ_RESPONSE_2BYTE: |
| if (xfer->rx_len >= 2) { |
| rxb[1] = data >> 16; |
| rx_len++; |
| } |
| |
| /* Fall through */ |
| case MIPI_DSI_RX_GENERIC_SHORT_READ_RESPONSE_1BYTE: |
| case MIPI_DSI_RX_DCS_SHORT_READ_RESPONSE_1BYTE: |
| rxb[0] = data >> 8; |
| rx_len++; |
| xfer->rx_len = rx_len; |
| err = rx_len; |
| goto clear_fifo; |
| |
| case MIPI_DSI_RX_ACKNOWLEDGE_AND_ERROR_REPORT: |
| printf("DSI Error Report: 0x%04x\n", (data >> 8) & 0xffff); |
| err = rx_len; |
| goto clear_fifo; |
| } |
| |
| size = (data >> 8) & 0xffff; |
| |
| if (size > xfer->rx_len) |
| size = xfer->rx_len; |
| else if (size < xfer->rx_len) |
| xfer->rx_len = size; |
| |
| size = xfer->rx_len - rx_len; |
| rx_len += size; |
| |
| /* Receive payload */ |
| while (size >= 4) { |
| data = nx_mipi_dsi_read_fifo(index); |
| rxb[0] = (data >> 0) & 0xff; |
| rxb[1] = (data >> 8) & 0xff; |
| rxb[2] = (data >> 16) & 0xff; |
| rxb[3] = (data >> 24) & 0xff; |
| rxb += 4, size -= 4; |
| } |
| |
| if (size) { |
| data = nx_mipi_dsi_read_fifo(index); |
| switch (size) { |
| case 3: |
| rxb[2] = (data >> 16) & 0xff; |
| case 2: |
| rxb[1] = (data >> 8) & 0xff; |
| case 1: |
| rxb[0] = data & 0xff; |
| } |
| } |
| |
| if (rx_len == xfer->rx_len) |
| err = rx_len; |
| |
| clear_fifo: |
| size = DSI_RX_FIFO_SIZE / 4; |
| do { |
| data = nx_mipi_dsi_read_fifo(index); |
| if (data == DSI_RX_FIFO_EMPTY) |
| break; |
| } while (--size); |
| |
| return err; |
| } |
| |
| #define IS_SHORT(t) (9 > ((t) & 0x0f)) |
| |
| static int nx_mipi_transfer(struct mipi_dsi_device *dsi, |
| const struct mipi_dsi_msg *msg) |
| { |
| struct mipi_xfer_msg xfer; |
| int err; |
| |
| if (!msg->tx_len) |
| return -EINVAL; |
| |
| /* set id */ |
| xfer.id = msg->type | (msg->channel << 6); |
| |
| /* short type msg */ |
| if (IS_SHORT(msg->type)) { |
| const char *txb = msg->tx_buf; |
| |
| if (msg->tx_len > 2) |
| return -EINVAL; |
| |
| xfer.tx_len = 0; /* no payload */ |
| xfer.data[0] = txb[0]; |
| xfer.data[1] = (msg->tx_len == 2) ? txb[1] : 0; |
| xfer.tx_buf = NULL; |
| } else { |
| xfer.tx_len = msg->tx_len; |
| xfer.data[0] = msg->tx_len & 0xff; |
| xfer.data[1] = msg->tx_len >> 8; |
| xfer.tx_buf = msg->tx_buf; |
| } |
| |
| xfer.rx_len = msg->rx_len; |
| xfer.rx_buf = msg->rx_buf; |
| xfer.flags = msg->flags; |
| |
| err = nx_mipi_transfer_tx(dsi, &xfer); |
| |
| if (xfer.rx_len) |
| err = nx_mipi_transfer_rx(dsi, &xfer); |
| |
| nx_mipi_transfer_done(dsi); |
| |
| return err; |
| } |
| |
| static ssize_t nx_mipi_write_buffer(struct mipi_dsi_device *dsi, |
| const void *data, size_t len) |
| { |
| struct mipi_dsi_msg msg = { |
| .channel = dsi->channel, |
| .tx_buf = data, |
| .tx_len = len |
| }; |
| |
| switch (len) { |
| case 0: |
| return -EINVAL; |
| case 1: |
| msg.type = MIPI_DSI_DCS_SHORT_WRITE; |
| break; |
| case 2: |
| msg.type = MIPI_DSI_DCS_SHORT_WRITE_PARAM; |
| break; |
| default: |
| msg.type = MIPI_DSI_DCS_LONG_WRITE; |
| break; |
| } |
| |
| if (dsi->mode_flags & MIPI_DSI_MODE_LPM) |
| msg.flags |= MIPI_DSI_MSG_USE_LPM; |
| |
| return nx_mipi_transfer(dsi, &msg); |
| } |
| |
| __weak int nx_mipi_dsi_lcd_bind(struct mipi_dsi_device *dsi) |
| { |
| return 0; |
| } |
| |
| /* |
| * disply |
| * MIPI DSI Setting |
| * (1) Initiallize MIPI(DSIM,DPHY,PLL) |
| * (2) Initiallize LCD |
| * (3) ReInitiallize MIPI(DSIM only) |
| * (4) Turn on display(MLC,DPC,...) |
| */ |
| void nx_mipi_display(int module, |
| struct dp_sync_info *sync, struct dp_ctrl_info *ctrl, |
| struct dp_plane_top *top, struct dp_plane_info *planes, |
| struct dp_mipi_dev *dev) |
| { |
| struct dp_plane_info *plane = planes; |
| struct mipi_dsi_device *dsi = &dev->dsi; |
| int input = module == 0 ? DP_DEVICE_DP0 : DP_DEVICE_DP1; |
| int count = top->plane_num; |
| int i = 0, ret; |
| |
| printf("MIPI: dp.%d\n", module); |
| |
| /* map mipi-dsi write callback func */ |
| dsi->write_buffer = nx_mipi_write_buffer; |
| |
| ret = nx_mipi_dsi_lcd_bind(dsi); |
| if (ret) { |
| printf("Error: bind mipi-dsi lcd driver !\n"); |
| return; |
| } |
| |
| dp_control_init(module); |
| dp_plane_init(module); |
| |
| mipi_init(); |
| |
| /* set plane */ |
| dp_plane_screen_setup(module, top); |
| |
| for (i = 0; count > i; i++, plane++) { |
| if (!plane->enable) |
| continue; |
| dp_plane_layer_setup(module, plane); |
| dp_plane_layer_enable(module, plane, 1); |
| } |
| dp_plane_screen_enable(module, 1); |
| |
| /* set mipi */ |
| mipi_prepare(module, input, sync, ctrl, dev); |
| |
| if (dsi->ops && dsi->ops->prepare) |
| dsi->ops->prepare(dsi); |
| |
| if (dsi->ops && dsi->ops->enable) |
| dsi->ops->enable(dsi); |
| |
| mipi_enable(module, input, sync, ctrl, dev); |
| |
| /* set dp control */ |
| dp_control_setup(module, sync, ctrl); |
| dp_control_enable(module, 1); |
| } |