| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (C) 2017 Intel Corporation <www.intel.com> |
| */ |
| |
| #include <common.h> |
| #include <errno.h> |
| #include <fdtdec.h> |
| #include <malloc.h> |
| #include <wait_bit.h> |
| #include <watchdog.h> |
| #include <asm/io.h> |
| #include <asm/arch/fpga_manager.h> |
| #include <asm/arch/misc.h> |
| #include <asm/arch/reset_manager.h> |
| #include <asm/arch/sdram.h> |
| #include <linux/kernel.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| static void sdram_mmr_init(void); |
| static u64 sdram_size_calc(void); |
| |
| /* FAWBANK - Number of Bank of a given device involved in the FAW period. */ |
| #define ARRIA10_SDR_ACTIVATE_FAWBANK (0x1) |
| |
| #define ARRIA_DDR_CONFIG(A, B, C, R) \ |
| (((A) << 24) | ((B) << 16) | ((C) << 8) | (R)) |
| #define DDR_CONFIG_ELEMENTS ARRAY_SIZE(ddr_config) |
| #define DDR_REG_SEQ2CORE 0xFFD0507C |
| #define DDR_REG_CORE2SEQ 0xFFD05078 |
| #define DDR_READ_LATENCY_DELAY 40 |
| #define DDR_SIZE_2GB_HEX 0x80000000 |
| |
| #define IO48_MMR_DRAMSTS 0xFFCFA0EC |
| #define IO48_MMR_NIOS2_RESERVE0 0xFFCFA110 |
| #define IO48_MMR_NIOS2_RESERVE1 0xFFCFA114 |
| #define IO48_MMR_NIOS2_RESERVE2 0xFFCFA118 |
| |
| #define SEQ2CORE_MASK 0xF |
| #define CORE2SEQ_INT_REQ 0xF |
| #define SEQ2CORE_INT_RESP_BIT 3 |
| |
| static const struct socfpga_ecc_hmc *socfpga_ecc_hmc_base = |
| (void *)SOCFPGA_SDR_ADDRESS; |
| static const struct socfpga_noc_ddr_scheduler *socfpga_noc_ddr_scheduler_base = |
| (void *)SOCFPGA_SDR_SCHEDULER_ADDRESS; |
| static const struct socfpga_noc_fw_ddr_mpu_fpga2sdram |
| *socfpga_noc_fw_ddr_mpu_fpga2sdram_base = |
| (void *)SOCFPGA_SDR_FIREWALL_MPU_FPGA_ADDRESS; |
| static const struct socfpga_noc_fw_ddr_l3 *socfpga_noc_fw_ddr_l3_base = |
| (void *)SOCFPGA_SDR_FIREWALL_L3_ADDRESS; |
| static const struct socfpga_io48_mmr *socfpga_io48_mmr_base = |
| (void *)SOCFPGA_HMC_MMR_IO48_ADDRESS; |
| |
| /* The following are the supported configurations */ |
| static u32 ddr_config[] = { |
| /* Chip - Row - Bank - Column Style */ |
| /* All Types */ |
| ARRIA_DDR_CONFIG(0, 3, 10, 12), |
| ARRIA_DDR_CONFIG(0, 3, 10, 13), |
| ARRIA_DDR_CONFIG(0, 3, 10, 14), |
| ARRIA_DDR_CONFIG(0, 3, 10, 15), |
| ARRIA_DDR_CONFIG(0, 3, 10, 16), |
| ARRIA_DDR_CONFIG(0, 3, 10, 17), |
| /* LPDDR x16 */ |
| ARRIA_DDR_CONFIG(0, 3, 11, 14), |
| ARRIA_DDR_CONFIG(0, 3, 11, 15), |
| ARRIA_DDR_CONFIG(0, 3, 11, 16), |
| ARRIA_DDR_CONFIG(0, 3, 12, 15), |
| /* DDR4 Only */ |
| ARRIA_DDR_CONFIG(0, 4, 10, 14), |
| ARRIA_DDR_CONFIG(0, 4, 10, 15), |
| ARRIA_DDR_CONFIG(0, 4, 10, 16), |
| ARRIA_DDR_CONFIG(0, 4, 10, 17), /* 14 */ |
| /* Chip - Bank - Row - Column Style */ |
| ARRIA_DDR_CONFIG(1, 3, 10, 12), |
| ARRIA_DDR_CONFIG(1, 3, 10, 13), |
| ARRIA_DDR_CONFIG(1, 3, 10, 14), |
| ARRIA_DDR_CONFIG(1, 3, 10, 15), |
| ARRIA_DDR_CONFIG(1, 3, 10, 16), |
| ARRIA_DDR_CONFIG(1, 3, 10, 17), |
| ARRIA_DDR_CONFIG(1, 3, 11, 14), |
| ARRIA_DDR_CONFIG(1, 3, 11, 15), |
| ARRIA_DDR_CONFIG(1, 3, 11, 16), |
| ARRIA_DDR_CONFIG(1, 3, 12, 15), |
| /* DDR4 Only */ |
| ARRIA_DDR_CONFIG(1, 4, 10, 14), |
| ARRIA_DDR_CONFIG(1, 4, 10, 15), |
| ARRIA_DDR_CONFIG(1, 4, 10, 16), |
| ARRIA_DDR_CONFIG(1, 4, 10, 17), |
| }; |
| |
| static int match_ddr_conf(u32 ddr_conf) |
| { |
| int i; |
| |
| for (i = 0; i < DDR_CONFIG_ELEMENTS; i++) { |
| if (ddr_conf == ddr_config[i]) |
| return i; |
| } |
| return 0; |
| } |
| |
| /* Check whether SDRAM is successfully Calibrated */ |
| static int is_sdram_cal_success(void) |
| { |
| return readl(&socfpga_ecc_hmc_base->ddrcalstat); |
| } |
| |
| static int emif_clear(void) |
| { |
| writel(0, DDR_REG_CORE2SEQ); |
| |
| return wait_for_bit_le32((u32 *)DDR_REG_SEQ2CORE, |
| SEQ2CORE_MASK, 0, 1000, 0); |
| } |
| |
| static int emif_reset(void) |
| { |
| u32 c2s, s2c; |
| int ret; |
| |
| c2s = readl(DDR_REG_CORE2SEQ); |
| s2c = readl(DDR_REG_SEQ2CORE); |
| |
| debug("c2s=%08x s2c=%08x nr0=%08x nr1=%08x nr2=%08x dst=%08x\n", |
| c2s, s2c, readl(IO48_MMR_NIOS2_RESERVE0), |
| readl(IO48_MMR_NIOS2_RESERVE1), |
| readl(IO48_MMR_NIOS2_RESERVE2), |
| readl(IO48_MMR_DRAMSTS)); |
| |
| if (s2c & SEQ2CORE_MASK) { |
| ret = emif_clear(); |
| if (ret) { |
| debug("failed emif_clear()\n"); |
| return -EPERM; |
| } |
| } |
| |
| writel(CORE2SEQ_INT_REQ, DDR_REG_CORE2SEQ); |
| |
| ret = wait_for_bit_le32((u32 *)DDR_REG_SEQ2CORE, |
| SEQ2CORE_INT_RESP_BIT, false, 1000, false); |
| if (ret) { |
| debug("emif_reset failed to see interrupt acknowledge\n"); |
| emif_clear(); |
| return ret; |
| } |
| |
| mdelay(1); |
| |
| ret = emif_clear(); |
| if (ret) { |
| debug("emif_clear() failed\n"); |
| return -EPERM; |
| } |
| debug("emif_reset interrupt cleared\n"); |
| |
| debug("nr0=%08x nr1=%08x nr2=%08x\n", |
| readl(IO48_MMR_NIOS2_RESERVE0), |
| readl(IO48_MMR_NIOS2_RESERVE1), |
| readl(IO48_MMR_NIOS2_RESERVE2)); |
| |
| return 0; |
| } |
| |
| static int ddr_setup(void) |
| { |
| int i, j, ddr_setup_complete = 0; |
| |
| /* Try 3 times to do a calibration */ |
| for (i = 0; (i < 3) && !ddr_setup_complete; i++) { |
| WATCHDOG_RESET(); |
| |
| /* A delay to wait for calibration bit to set */ |
| for (j = 0; (j < 10) && !ddr_setup_complete; j++) { |
| mdelay(500); |
| ddr_setup_complete = is_sdram_cal_success(); |
| } |
| |
| if (!ddr_setup_complete) |
| if (emif_reset()) |
| puts("Error: Failed to reset EMIF\n"); |
| } |
| |
| /* After 3 times trying calibration */ |
| if (!ddr_setup_complete) { |
| puts("Error: Could Not Calibrate SDRAM\n"); |
| return -EPERM; |
| } |
| |
| return 0; |
| } |
| |
| static int sdram_is_ecc_enabled(void) |
| { |
| return !!(readl(&socfpga_ecc_hmc_base->eccctrl) & |
| ALT_ECC_HMC_OCP_ECCCTL_ECC_EN_SET_MSK); |
| } |
| |
| /* Initialize SDRAM ECC bits to avoid false DBE */ |
| static void sdram_init_ecc_bits(u32 size) |
| { |
| icache_enable(); |
| |
| memset(0, 0, 0x8000); |
| gd->arch.tlb_addr = 0x4000; |
| gd->arch.tlb_size = PGTABLE_SIZE; |
| |
| dcache_enable(); |
| |
| printf("DDRCAL: Scrubbing ECC RAM (%i MiB).\n", size >> 20); |
| memset((void *)0x8000, 0, size - 0x8000); |
| flush_dcache_all(); |
| printf("DDRCAL: Scrubbing ECC RAM done.\n"); |
| dcache_disable(); |
| } |
| |
| /* Function to startup the SDRAM*/ |
| static int sdram_startup(void) |
| { |
| /* Release NOC ddr scheduler from reset */ |
| socfpga_reset_deassert_noc_ddr_scheduler(); |
| |
| /* Bringup the DDR (calibration and configuration) */ |
| return ddr_setup(); |
| } |
| |
| static u64 sdram_size_calc(void) |
| { |
| u32 dramaddrw = readl(&socfpga_io48_mmr_base->dramaddrw); |
| |
| u64 size = BIT(((dramaddrw & |
| IO48_MMR_DRAMADDRW_CFG_CS_ADDR_WIDTH_MASK) >> |
| IO48_MMR_DRAMADDRW_CFG_CS_ADDR_WIDTH_SHIFT) + |
| ((dramaddrw & |
| IO48_MMR_DRAMADDRW_CFG_BANK_GROUP_ADDR_WIDTH_MASK) >> |
| IO48_MMR_DRAMADDRW_CFG_BANK_GROUP_ADDR_WIDTH_SHIFT) + |
| ((dramaddrw & |
| IO48_MMR_DRAMADDRW_CFG_BANK_ADDR_WIDTH_MASK) >> |
| IO48_MMR_DRAMADDRW_CFG_BANK_ADDR_WIDTH_SHIFT) + |
| ((dramaddrw & |
| IO48_MMR_DRAMADDRW_CFG_ROW_ADDR_WIDTH_MASK) >> |
| IO48_MMR_DRAMADDRW_CFG_ROW_ADDR_WIDTH_SHIFT) + |
| (dramaddrw & IO48_MMR_DRAMADDRW_CFG_COL_ADDR_WIDTH_MASK)); |
| |
| size *= (2 << (readl(&socfpga_ecc_hmc_base->ddrioctrl) & |
| ALT_ECC_HMC_OCP_DDRIOCTRL_IO_SIZE_MSK)); |
| |
| debug("SDRAM size=%llu\n", size); |
| |
| return size; |
| } |
| |
| /* Function to initialize SDRAM MMR and NOC DDR scheduler*/ |
| static void sdram_mmr_init(void) |
| { |
| u32 update_value, io48_value; |
| u32 ctrlcfg0 = readl(&socfpga_io48_mmr_base->ctrlcfg0); |
| u32 ctrlcfg1 = readl(&socfpga_io48_mmr_base->ctrlcfg1); |
| u32 dramaddrw = readl(&socfpga_io48_mmr_base->dramaddrw); |
| u32 caltim0 = readl(&socfpga_io48_mmr_base->caltiming0); |
| u32 caltim1 = readl(&socfpga_io48_mmr_base->caltiming1); |
| u32 caltim2 = readl(&socfpga_io48_mmr_base->caltiming2); |
| u32 caltim3 = readl(&socfpga_io48_mmr_base->caltiming3); |
| u32 caltim4 = readl(&socfpga_io48_mmr_base->caltiming4); |
| u32 caltim9 = readl(&socfpga_io48_mmr_base->caltiming9); |
| u32 ddrioctl; |
| |
| /* |
| * Configure the DDR IO size [0xFFCFB008] |
| * niosreserve0: Used to indicate DDR width & |
| * bit[7:0] = Number of data bits (0x20 for 32bit) |
| * bit[8] = 1 if user-mode OCT is present |
| * bit[9] = 1 if warm reset compiled into EMIF Cal Code |
| * bit[10] = 1 if warm reset is on during generation in EMIF Cal |
| * niosreserve1: IP ADCDS version encoded as 16 bit value |
| * bit[2:0] = Variant (0=not special,1=FAE beta, 2=Customer beta, |
| * 3=EAP, 4-6 are reserved) |
| * bit[5:3] = Service Pack # (e.g. 1) |
| * bit[9:6] = Minor Release # |
| * bit[14:10] = Major Release # |
| */ |
| if ((readl(&socfpga_io48_mmr_base->niosreserve1) >> 6) & 0x1FF) { |
| update_value = readl(&socfpga_io48_mmr_base->niosreserve0); |
| writel(((update_value & 0xFF) >> 5), |
| &socfpga_ecc_hmc_base->ddrioctrl); |
| } |
| |
| ddrioctl = readl(&socfpga_ecc_hmc_base->ddrioctrl); |
| |
| /* Set the DDR Configuration [0xFFD12400] */ |
| io48_value = ARRIA_DDR_CONFIG( |
| ((ctrlcfg1 & |
| IO48_MMR_CTRLCFG1_ADDR_ORDER_MASK) >> |
| IO48_MMR_CTRLCFG1_ADDR_ORDER_SHIFT), |
| ((dramaddrw & |
| IO48_MMR_DRAMADDRW_CFG_BANK_ADDR_WIDTH_MASK) >> |
| IO48_MMR_DRAMADDRW_CFG_BANK_ADDR_WIDTH_SHIFT) + |
| ((dramaddrw & |
| IO48_MMR_DRAMADDRW_CFG_BANK_GROUP_ADDR_WIDTH_MASK) >> |
| IO48_MMR_DRAMADDRW_CFG_BANK_GROUP_ADDR_WIDTH_SHIFT), |
| (dramaddrw & |
| IO48_MMR_DRAMADDRW_CFG_COL_ADDR_WIDTH_MASK), |
| ((dramaddrw & |
| IO48_MMR_DRAMADDRW_CFG_ROW_ADDR_WIDTH_MASK) >> |
| IO48_MMR_DRAMADDRW_CFG_ROW_ADDR_WIDTH_SHIFT)); |
| |
| update_value = match_ddr_conf(io48_value); |
| if (update_value) |
| writel(update_value, |
| &socfpga_noc_ddr_scheduler_base->ddr_t_main_scheduler_ddrconf); |
| |
| /* |
| * Configure DDR timing [0xFFD1240C] |
| * RDTOMISS = tRTP + tRP + tRCD - BL/2 |
| * WRTOMISS = WL + tWR + tRP + tRCD and |
| * WL = RL + BL/2 + 2 - rd-to-wr ; tWR = 15ns so... |
| * First part of equation is in memory clock units so divide by 2 |
| * for HMC clock units. 1066MHz is close to 1ns so use 15 directly. |
| * WRTOMISS = ((RL + BL/2 + 2 + tWR) >> 1)- rd-to-wr + tRP + tRCD |
| */ |
| u32 ctrlcfg0_cfg_ctrl_burst_len = |
| (ctrlcfg0 & IO48_MMR_CTRLCFG0_CTRL_BURST_LENGTH_MASK) >> |
| IO48_MMR_CTRLCFG0_CTRL_BURST_LENGTH_SHIFT; |
| |
| u32 caltim0_cfg_act_to_rdwr = caltim0 & |
| IO48_MMR_CALTIMING0_CFG_ACT_TO_RDWR_MASK; |
| |
| u32 caltim0_cfg_act_to_act = |
| (caltim0 & IO48_MMR_CALTIMING0_CFG_ACT_TO_ACT_MASK) >> |
| IO48_MMR_CALTIMING0_CFG_ACT_TO_ACT_SHIFT; |
| |
| u32 caltim0_cfg_act_to_act_db = |
| (caltim0 & |
| IO48_MMR_CALTIMING0_CFG_ACT_TO_ACT_DIFF_BANK_MASK) >> |
| IO48_MMR_CALTIMING0_CFG_ACT_TO_ACT_DIFF_BANK_SHIFT; |
| |
| u32 caltim1_cfg_rd_to_wr = |
| (caltim1 & IO48_MMR_CALTIMING1_CFG_RD_TO_WR_MASK) >> |
| IO48_MMR_CALTIMING1_CFG_RD_TO_WR_SHIFT; |
| |
| u32 caltim1_cfg_rd_to_rd_dc = |
| (caltim1 & IO48_MMR_CALTIMING1_CFG_RD_TO_RD_DC_MASK) >> |
| IO48_MMR_CALTIMING1_CFG_RD_TO_RD_DC_SHIFT; |
| |
| u32 caltim1_cfg_rd_to_wr_dc = |
| (caltim1 & IO48_MMR_CALTIMING1_CFG_RD_TO_WR_DIFF_CHIP_MASK) >> |
| IO48_MMR_CALTIMING1_CFG_RD_TO_WR_DIFF_CHIP_SHIFT; |
| |
| u32 caltim2_cfg_rd_to_pch = |
| (caltim2 & IO48_MMR_CALTIMING2_CFG_RD_TO_PCH_MASK) >> |
| IO48_MMR_CALTIMING2_CFG_RD_TO_PCH_SHIFT; |
| |
| u32 caltim3_cfg_wr_to_rd = |
| (caltim3 & IO48_MMR_CALTIMING3_CFG_WR_TO_RD_MASK) >> |
| IO48_MMR_CALTIMING3_CFG_WR_TO_RD_SHIFT; |
| |
| u32 caltim3_cfg_wr_to_rd_dc = |
| (caltim3 & IO48_MMR_CALTIMING3_CFG_WR_TO_RD_DIFF_CHIP_MASK) >> |
| IO48_MMR_CALTIMING3_CFG_WR_TO_RD_DIFF_CHIP_SHIFT; |
| |
| u32 caltim4_cfg_pch_to_valid = |
| (caltim4 & IO48_MMR_CALTIMING4_CFG_PCH_TO_VALID_MASK) >> |
| IO48_MMR_CALTIMING4_CFG_PCH_TO_VALID_SHIFT; |
| |
| u32 caltim9_cfg_4_act_to_act = caltim9 & |
| IO48_MMR_CALTIMING9_CFG_WR_4_ACT_TO_ACT_MASK; |
| |
| update_value = (caltim2_cfg_rd_to_pch + caltim4_cfg_pch_to_valid + |
| caltim0_cfg_act_to_rdwr - |
| (ctrlcfg0_cfg_ctrl_burst_len >> 2)); |
| |
| io48_value = ((((readl(&socfpga_io48_mmr_base->dramtiming0) & |
| ALT_IO48_DRAMTIME_MEM_READ_LATENCY_MASK) + 2 + 15 + |
| (ctrlcfg0_cfg_ctrl_burst_len >> 1)) >> 1) - |
| /* Up to here was in memory cycles so divide by 2 */ |
| caltim1_cfg_rd_to_wr + caltim0_cfg_act_to_rdwr + |
| caltim4_cfg_pch_to_valid); |
| |
| writel(((caltim0_cfg_act_to_act << |
| ALT_NOC_MPU_DDR_T_SCHED_DDRTIMING_ACTTOACT_LSB) | |
| (update_value << |
| ALT_NOC_MPU_DDR_T_SCHED_DDRTIMING_RDTOMISS_LSB) | |
| (io48_value << |
| ALT_NOC_MPU_DDR_T_SCHED_DDRTIMING_WRTOMISS_LSB) | |
| ((ctrlcfg0_cfg_ctrl_burst_len >> 2) << |
| ALT_NOC_MPU_DDR_T_SCHED_DDRTIMING_BURSTLEN_LSB) | |
| (caltim1_cfg_rd_to_wr << |
| ALT_NOC_MPU_DDR_T_SCHED_DDRTIMING_RDTOWR_LSB) | |
| (caltim3_cfg_wr_to_rd << |
| ALT_NOC_MPU_DDR_T_SCHED_DDRTIMING_WRTORD_LSB) | |
| (((ddrioctl == 1) ? 1 : 0) << |
| ALT_NOC_MPU_DDR_T_SCHED_DDRTIMING_BWRATIO_LSB)), |
| &socfpga_noc_ddr_scheduler_base-> |
| ddr_t_main_scheduler_ddrtiming); |
| |
| /* Configure DDR mode [0xFFD12410] [precharge = 0] */ |
| writel(((ddrioctl ? 0 : 1) << |
| ALT_NOC_MPU_DDR_T_SCHED_DDRMOD_BWRATIOEXTENDED_LSB), |
| &socfpga_noc_ddr_scheduler_base->ddr_t_main_scheduler_ddrmode); |
| |
| /* Configure the read latency [0xFFD12414] */ |
| writel(((readl(&socfpga_io48_mmr_base->dramtiming0) & |
| ALT_IO48_DRAMTIME_MEM_READ_LATENCY_MASK) >> 1) + |
| DDR_READ_LATENCY_DELAY, |
| &socfpga_noc_ddr_scheduler_base-> |
| ddr_t_main_scheduler_readlatency); |
| |
| /* |
| * Configuring timing values concerning activate commands |
| * [0xFFD12438] [FAWBANK alway 1 because always 4 bank DDR] |
| */ |
| writel(((caltim0_cfg_act_to_act_db << |
| ALT_NOC_MPU_DDR_T_SCHED_ACTIVATE_RRD_LSB) | |
| (caltim9_cfg_4_act_to_act << |
| ALT_NOC_MPU_DDR_T_SCHED_ACTIVATE_FAW_LSB) | |
| (ARRIA10_SDR_ACTIVATE_FAWBANK << |
| ALT_NOC_MPU_DDR_T_SCHED_ACTIVATE_FAWBANK_LSB)), |
| &socfpga_noc_ddr_scheduler_base->ddr_t_main_scheduler_activate); |
| |
| /* |
| * Configuring timing values concerning device to device data bus |
| * ownership change [0xFFD1243C] |
| */ |
| writel(((caltim1_cfg_rd_to_rd_dc << |
| ALT_NOC_MPU_DDR_T_SCHED_DEVTODEV_BUSRDTORD_LSB) | |
| (caltim1_cfg_rd_to_wr_dc << |
| ALT_NOC_MPU_DDR_T_SCHED_DEVTODEV_BUSRDTOWR_LSB) | |
| (caltim3_cfg_wr_to_rd_dc << |
| ALT_NOC_MPU_DDR_T_SCHED_DEVTODEV_BUSWRTORD_LSB)), |
| &socfpga_noc_ddr_scheduler_base->ddr_t_main_scheduler_devtodev); |
| |
| /* Enable or disable the SDRAM ECC */ |
| if (ctrlcfg1 & IO48_MMR_CTRLCFG1_CTRL_ENABLE_ECC) { |
| setbits_le32(&socfpga_ecc_hmc_base->eccctrl, |
| (ALT_ECC_HMC_OCP_ECCCTL_AWB_CNT_RST_SET_MSK | |
| ALT_ECC_HMC_OCP_ECCCTL_CNT_RST_SET_MSK | |
| ALT_ECC_HMC_OCP_ECCCTL_ECC_EN_SET_MSK)); |
| clrbits_le32(&socfpga_ecc_hmc_base->eccctrl, |
| (ALT_ECC_HMC_OCP_ECCCTL_AWB_CNT_RST_SET_MSK | |
| ALT_ECC_HMC_OCP_ECCCTL_CNT_RST_SET_MSK)); |
| setbits_le32(&socfpga_ecc_hmc_base->eccctrl2, |
| (ALT_ECC_HMC_OCP_ECCCTL2_RMW_EN_SET_MSK | |
| ALT_ECC_HMC_OCP_ECCCTL2_AWB_EN_SET_MSK)); |
| } else { |
| clrbits_le32(&socfpga_ecc_hmc_base->eccctrl, |
| (ALT_ECC_HMC_OCP_ECCCTL_AWB_CNT_RST_SET_MSK | |
| ALT_ECC_HMC_OCP_ECCCTL_CNT_RST_SET_MSK | |
| ALT_ECC_HMC_OCP_ECCCTL_ECC_EN_SET_MSK)); |
| clrbits_le32(&socfpga_ecc_hmc_base->eccctrl2, |
| (ALT_ECC_HMC_OCP_ECCCTL2_RMW_EN_SET_MSK | |
| ALT_ECC_HMC_OCP_ECCCTL2_AWB_EN_SET_MSK)); |
| } |
| } |
| |
| struct firewall_entry { |
| const char *prop_name; |
| const u32 cfg_addr; |
| const u32 en_addr; |
| const u32 en_bit; |
| }; |
| #define FW_MPU_FPGA_ADDRESS \ |
| ((const struct socfpga_noc_fw_ddr_mpu_fpga2sdram *)\ |
| SOCFPGA_SDR_FIREWALL_MPU_FPGA_ADDRESS) |
| |
| #define SOCFPGA_SDR_FIREWALL_MPU_FPGA_ADDRESS_OFFSET(ADDR) \ |
| (SOCFPGA_SDR_FIREWALL_MPU_FPGA_ADDRESS + \ |
| offsetof(struct socfpga_noc_fw_ddr_mpu_fpga2sdram, ADDR)) |
| |
| #define SOCFPGA_SDR_FIREWALL_L3_ADDRESS_OFFSET(ADDR) \ |
| (SOCFPGA_SDR_FIREWALL_L3_ADDRESS + \ |
| offsetof(struct socfpga_noc_fw_ddr_l3, ADDR)) |
| |
| const struct firewall_entry firewall_table[] = { |
| { |
| "mpu0", |
| SOCFPGA_SDR_FIREWALL_MPU_FPGA_ADDRESS_OFFSET(mpuregion0addr), |
| SOCFPGA_SDR_FIREWALL_MPU_FPGA_ADDRESS_OFFSET(enable), |
| ALT_NOC_FW_DDR_SCR_EN_MPUREG0EN_SET_MSK |
| }, |
| { |
| "mpu1", |
| SOCFPGA_SDR_FIREWALL_MPU_FPGA_ADDRESS + |
| SOCFPGA_SDR_FIREWALL_MPU_FPGA_ADDRESS_OFFSET(mpuregion1addr), |
| SOCFPGA_SDR_FIREWALL_MPU_FPGA_ADDRESS_OFFSET(enable), |
| ALT_NOC_FW_DDR_SCR_EN_MPUREG1EN_SET_MSK |
| }, |
| { |
| "mpu2", |
| SOCFPGA_SDR_FIREWALL_MPU_FPGA_ADDRESS_OFFSET(mpuregion2addr), |
| SOCFPGA_SDR_FIREWALL_MPU_FPGA_ADDRESS_OFFSET(enable), |
| ALT_NOC_FW_DDR_SCR_EN_MPUREG2EN_SET_MSK |
| }, |
| { |
| "mpu3", |
| SOCFPGA_SDR_FIREWALL_MPU_FPGA_ADDRESS_OFFSET(mpuregion3addr), |
| SOCFPGA_SDR_FIREWALL_MPU_FPGA_ADDRESS_OFFSET(enable), |
| ALT_NOC_FW_DDR_SCR_EN_MPUREG3EN_SET_MSK |
| }, |
| { |
| "l3-0", |
| SOCFPGA_SDR_FIREWALL_L3_ADDRESS_OFFSET(hpsregion0addr), |
| SOCFPGA_SDR_FIREWALL_L3_ADDRESS_OFFSET(enable), |
| ALT_NOC_FW_DDR_SCR_EN_HPSREG0EN_SET_MSK |
| }, |
| { |
| "l3-1", |
| SOCFPGA_SDR_FIREWALL_L3_ADDRESS_OFFSET(hpsregion1addr), |
| SOCFPGA_SDR_FIREWALL_L3_ADDRESS_OFFSET(enable), |
| ALT_NOC_FW_DDR_SCR_EN_HPSREG1EN_SET_MSK |
| }, |
| { |
| "l3-2", |
| SOCFPGA_SDR_FIREWALL_L3_ADDRESS_OFFSET(hpsregion2addr), |
| SOCFPGA_SDR_FIREWALL_L3_ADDRESS_OFFSET(enable), |
| ALT_NOC_FW_DDR_SCR_EN_HPSREG2EN_SET_MSK |
| }, |
| { |
| "l3-3", |
| SOCFPGA_SDR_FIREWALL_L3_ADDRESS_OFFSET(hpsregion3addr), |
| SOCFPGA_SDR_FIREWALL_L3_ADDRESS_OFFSET(enable), |
| ALT_NOC_FW_DDR_SCR_EN_HPSREG3EN_SET_MSK |
| }, |
| { |
| "l3-4", |
| SOCFPGA_SDR_FIREWALL_L3_ADDRESS_OFFSET(hpsregion4addr), |
| SOCFPGA_SDR_FIREWALL_L3_ADDRESS_OFFSET(enable), |
| ALT_NOC_FW_DDR_SCR_EN_HPSREG4EN_SET_MSK |
| }, |
| { |
| "l3-5", |
| SOCFPGA_SDR_FIREWALL_L3_ADDRESS_OFFSET(hpsregion5addr), |
| SOCFPGA_SDR_FIREWALL_L3_ADDRESS_OFFSET(enable), |
| ALT_NOC_FW_DDR_SCR_EN_HPSREG5EN_SET_MSK |
| }, |
| { |
| "l3-6", |
| SOCFPGA_SDR_FIREWALL_L3_ADDRESS_OFFSET(hpsregion6addr), |
| SOCFPGA_SDR_FIREWALL_L3_ADDRESS_OFFSET(enable), |
| ALT_NOC_FW_DDR_SCR_EN_HPSREG6EN_SET_MSK |
| }, |
| { |
| "l3-7", |
| SOCFPGA_SDR_FIREWALL_L3_ADDRESS_OFFSET(hpsregion7addr), |
| SOCFPGA_SDR_FIREWALL_L3_ADDRESS_OFFSET(enable), |
| ALT_NOC_FW_DDR_SCR_EN_HPSREG7EN_SET_MSK |
| }, |
| { |
| "fpga2sdram0-0", |
| SOCFPGA_SDR_FIREWALL_MPU_FPGA_ADDRESS_OFFSET |
| (fpga2sdram0region0addr), |
| SOCFPGA_SDR_FIREWALL_MPU_FPGA_ADDRESS_OFFSET(enable), |
| ALT_NOC_FW_DDR_SCR_EN_F2SDR0REG0EN_SET_MSK |
| }, |
| { |
| "fpga2sdram0-1", |
| SOCFPGA_SDR_FIREWALL_MPU_FPGA_ADDRESS_OFFSET |
| (fpga2sdram0region1addr), |
| SOCFPGA_SDR_FIREWALL_MPU_FPGA_ADDRESS_OFFSET(enable), |
| ALT_NOC_FW_DDR_SCR_EN_F2SDR0REG1EN_SET_MSK |
| }, |
| { |
| "fpga2sdram0-2", |
| SOCFPGA_SDR_FIREWALL_MPU_FPGA_ADDRESS_OFFSET |
| (fpga2sdram0region2addr), |
| SOCFPGA_SDR_FIREWALL_MPU_FPGA_ADDRESS_OFFSET(enable), |
| ALT_NOC_FW_DDR_SCR_EN_F2SDR0REG2EN_SET_MSK |
| }, |
| { |
| "fpga2sdram0-3", |
| SOCFPGA_SDR_FIREWALL_MPU_FPGA_ADDRESS_OFFSET |
| (fpga2sdram0region3addr), |
| SOCFPGA_SDR_FIREWALL_MPU_FPGA_ADDRESS_OFFSET(enable), |
| ALT_NOC_FW_DDR_SCR_EN_F2SDR0REG3EN_SET_MSK |
| }, |
| { |
| "fpga2sdram1-0", |
| SOCFPGA_SDR_FIREWALL_MPU_FPGA_ADDRESS_OFFSET |
| (fpga2sdram1region0addr), |
| SOCFPGA_SDR_FIREWALL_MPU_FPGA_ADDRESS_OFFSET(enable), |
| ALT_NOC_FW_DDR_SCR_EN_F2SDR1REG0EN_SET_MSK |
| }, |
| { |
| "fpga2sdram1-1", |
| SOCFPGA_SDR_FIREWALL_MPU_FPGA_ADDRESS_OFFSET |
| (fpga2sdram1region1addr), |
| SOCFPGA_SDR_FIREWALL_MPU_FPGA_ADDRESS_OFFSET(enable), |
| ALT_NOC_FW_DDR_SCR_EN_F2SDR1REG1EN_SET_MSK |
| }, |
| { |
| "fpga2sdram1-2", |
| SOCFPGA_SDR_FIREWALL_MPU_FPGA_ADDRESS_OFFSET |
| (fpga2sdram1region2addr), |
| SOCFPGA_SDR_FIREWALL_MPU_FPGA_ADDRESS_OFFSET(enable), |
| ALT_NOC_FW_DDR_SCR_EN_F2SDR1REG2EN_SET_MSK |
| }, |
| { |
| "fpga2sdram1-3", |
| SOCFPGA_SDR_FIREWALL_MPU_FPGA_ADDRESS_OFFSET |
| (fpga2sdram1region3addr), |
| SOCFPGA_SDR_FIREWALL_MPU_FPGA_ADDRESS_OFFSET(enable), |
| ALT_NOC_FW_DDR_SCR_EN_F2SDR1REG3EN_SET_MSK |
| }, |
| { |
| "fpga2sdram2-0", |
| SOCFPGA_SDR_FIREWALL_MPU_FPGA_ADDRESS_OFFSET |
| (fpga2sdram2region0addr), |
| SOCFPGA_SDR_FIREWALL_MPU_FPGA_ADDRESS_OFFSET(enable), |
| ALT_NOC_FW_DDR_SCR_EN_F2SDR2REG0EN_SET_MSK |
| }, |
| { |
| "fpga2sdram2-1", |
| SOCFPGA_SDR_FIREWALL_MPU_FPGA_ADDRESS_OFFSET |
| (fpga2sdram2region1addr), |
| SOCFPGA_SDR_FIREWALL_MPU_FPGA_ADDRESS_OFFSET(enable), |
| ALT_NOC_FW_DDR_SCR_EN_F2SDR2REG1EN_SET_MSK |
| }, |
| { |
| "fpga2sdram2-2", |
| SOCFPGA_SDR_FIREWALL_MPU_FPGA_ADDRESS_OFFSET |
| (fpga2sdram2region2addr), |
| SOCFPGA_SDR_FIREWALL_MPU_FPGA_ADDRESS_OFFSET(enable), |
| ALT_NOC_FW_DDR_SCR_EN_F2SDR2REG2EN_SET_MSK |
| }, |
| { |
| "fpga2sdram2-3", |
| SOCFPGA_SDR_FIREWALL_MPU_FPGA_ADDRESS_OFFSET |
| (fpga2sdram2region3addr), |
| SOCFPGA_SDR_FIREWALL_MPU_FPGA_ADDRESS_OFFSET(enable), |
| ALT_NOC_FW_DDR_SCR_EN_F2SDR2REG3EN_SET_MSK |
| }, |
| |
| }; |
| |
| static int of_sdram_firewall_setup(const void *blob) |
| { |
| int child, i, node, ret; |
| u32 start_end[2]; |
| char name[32]; |
| |
| node = fdtdec_next_compatible(blob, 0, COMPAT_ALTERA_SOCFPGA_NOC); |
| if (node < 0) |
| return -ENXIO; |
| |
| child = fdt_first_subnode(blob, node); |
| if (child < 0) |
| return -ENXIO; |
| |
| /* set to default state */ |
| writel(0, &socfpga_noc_fw_ddr_mpu_fpga2sdram_base->enable); |
| writel(0, &socfpga_noc_fw_ddr_l3_base->enable); |
| |
| |
| for (i = 0; i < ARRAY_SIZE(firewall_table); i++) { |
| sprintf(name, "%s", firewall_table[i].prop_name); |
| ret = fdtdec_get_int_array(blob, child, name, |
| start_end, 2); |
| if (ret) { |
| sprintf(name, "altr,%s", firewall_table[i].prop_name); |
| ret = fdtdec_get_int_array(blob, child, name, |
| start_end, 2); |
| if (ret) |
| continue; |
| } |
| |
| writel((start_end[0] & ALT_NOC_FW_DDR_ADDR_MASK) | |
| (start_end[1] << ALT_NOC_FW_DDR_END_ADDR_LSB), |
| firewall_table[i].cfg_addr); |
| setbits_le32(firewall_table[i].en_addr, |
| firewall_table[i].en_bit); |
| } |
| |
| return 0; |
| } |
| |
| int ddr_calibration_sequence(void) |
| { |
| WATCHDOG_RESET(); |
| |
| /* Check to see if SDRAM cal was success */ |
| if (sdram_startup()) { |
| puts("DDRCAL: Failed\n"); |
| return -EPERM; |
| } |
| |
| puts("DDRCAL: Success\n"); |
| |
| WATCHDOG_RESET(); |
| |
| /* initialize the MMR register */ |
| sdram_mmr_init(); |
| |
| /* assigning the SDRAM size */ |
| u64 size = sdram_size_calc(); |
| |
| /* |
| * If size is less than zero, this is invalid/weird value from |
| * calculation, use default Config size. |
| * Up to 2GB is supported, 2GB would be used if more than that. |
| */ |
| if (size <= 0) |
| gd->ram_size = PHYS_SDRAM_1_SIZE; |
| else if (DDR_SIZE_2GB_HEX <= size) |
| gd->ram_size = DDR_SIZE_2GB_HEX; |
| else |
| gd->ram_size = (u32)size; |
| |
| /* setup the dram info within bd */ |
| dram_init_banksize(); |
| |
| if (of_sdram_firewall_setup(gd->fdt_blob)) |
| puts("FW: Error Configuring Firewall\n"); |
| |
| if (sdram_is_ecc_enabled()) |
| sdram_init_ecc_bits(gd->ram_size); |
| |
| return 0; |
| } |