| /* |
| * Freescale i.MX23/i.MX28 LCDIF driver |
| * |
| * Copyright (C) 2011-2013 Marek Vasut <marex@denx.de> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| #include <common.h> |
| #include <malloc.h> |
| #include <video_fb.h> |
| |
| #include <asm/arch/imx-regs.h> |
| #include <asm/arch/clock.h> |
| #include <asm/arch/sys_proto.h> |
| #include <asm/errno.h> |
| #include <asm/io.h> |
| |
| #include "videomodes.h" |
| |
| #define PS2KHZ(ps) (1000000000UL / (ps)) |
| |
| static GraphicDevice panel; |
| |
| /* |
| * DENX M28EVK: |
| * setenv videomode |
| * video=ctfb:x:800,y:480,depth:18,mode:0,pclk:30066, |
| * le:0,ri:256,up:0,lo:45,hs:1,vs:1,sync:100663296,vmode:0 |
| * |
| * Freescale mx23evk/mx28evk with a Seiko 4.3'' WVGA panel: |
| * setenv videomode |
| * video=ctfb:x:800,y:480,depth:24,mode:0,pclk:29851, |
| * le:89,ri:164,up:23,lo:10,hs:10,vs:10,sync:0,vmode:0 |
| */ |
| |
| static void mxs_lcd_init(GraphicDevice *panel, |
| struct ctfb_res_modes *mode, int bpp) |
| { |
| struct mxs_lcdif_regs *regs = (struct mxs_lcdif_regs *)MXS_LCDIF_BASE; |
| uint32_t word_len = 0, bus_width = 0; |
| uint8_t valid_data = 0; |
| |
| /* Kick in the LCDIF clock */ |
| mxs_set_lcdclk(PS2KHZ(mode->pixclock)); |
| |
| /* Restart the LCDIF block */ |
| mxs_reset_block(®s->hw_lcdif_ctrl_reg); |
| |
| switch (bpp) { |
| case 24: |
| word_len = LCDIF_CTRL_WORD_LENGTH_24BIT; |
| bus_width = LCDIF_CTRL_LCD_DATABUS_WIDTH_24BIT; |
| valid_data = 0x7; |
| break; |
| case 18: |
| word_len = LCDIF_CTRL_WORD_LENGTH_24BIT; |
| bus_width = LCDIF_CTRL_LCD_DATABUS_WIDTH_18BIT; |
| valid_data = 0x7; |
| break; |
| case 16: |
| word_len = LCDIF_CTRL_WORD_LENGTH_16BIT; |
| bus_width = LCDIF_CTRL_LCD_DATABUS_WIDTH_16BIT; |
| valid_data = 0xf; |
| break; |
| case 8: |
| word_len = LCDIF_CTRL_WORD_LENGTH_8BIT; |
| bus_width = LCDIF_CTRL_LCD_DATABUS_WIDTH_8BIT; |
| valid_data = 0xf; |
| break; |
| } |
| |
| writel(bus_width | word_len | LCDIF_CTRL_DOTCLK_MODE | |
| LCDIF_CTRL_BYPASS_COUNT | LCDIF_CTRL_LCDIF_MASTER, |
| ®s->hw_lcdif_ctrl); |
| |
| writel(valid_data << LCDIF_CTRL1_BYTE_PACKING_FORMAT_OFFSET, |
| ®s->hw_lcdif_ctrl1); |
| writel((mode->yres << LCDIF_TRANSFER_COUNT_V_COUNT_OFFSET) | mode->xres, |
| ®s->hw_lcdif_transfer_count); |
| |
| writel(LCDIF_VDCTRL0_ENABLE_PRESENT | LCDIF_VDCTRL0_ENABLE_POL | |
| LCDIF_VDCTRL0_VSYNC_PERIOD_UNIT | |
| LCDIF_VDCTRL0_VSYNC_PULSE_WIDTH_UNIT | |
| mode->vsync_len, ®s->hw_lcdif_vdctrl0); |
| writel(mode->upper_margin + mode->lower_margin + |
| mode->vsync_len + mode->yres, |
| ®s->hw_lcdif_vdctrl1); |
| writel((mode->hsync_len << LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH_OFFSET) | |
| (mode->left_margin + mode->right_margin + |
| mode->hsync_len + mode->xres), |
| ®s->hw_lcdif_vdctrl2); |
| writel(((mode->left_margin + mode->hsync_len) << |
| LCDIF_VDCTRL3_HORIZONTAL_WAIT_CNT_OFFSET) | |
| (mode->upper_margin + mode->vsync_len), |
| ®s->hw_lcdif_vdctrl3); |
| writel((0 << LCDIF_VDCTRL4_DOTCLK_DLY_SEL_OFFSET) | mode->xres, |
| ®s->hw_lcdif_vdctrl4); |
| |
| writel(panel->frameAdrs, ®s->hw_lcdif_cur_buf); |
| writel(panel->frameAdrs, ®s->hw_lcdif_next_buf); |
| |
| /* Flush FIFO first */ |
| writel(LCDIF_CTRL1_FIFO_CLEAR, ®s->hw_lcdif_ctrl1_set); |
| |
| /* Sync signals ON */ |
| setbits_le32(®s->hw_lcdif_vdctrl4, LCDIF_VDCTRL4_SYNC_SIGNALS_ON); |
| |
| /* FIFO cleared */ |
| writel(LCDIF_CTRL1_FIFO_CLEAR, ®s->hw_lcdif_ctrl1_clr); |
| |
| /* RUN! */ |
| writel(LCDIF_CTRL_RUN, ®s->hw_lcdif_ctrl_set); |
| } |
| |
| void *video_hw_init(void) |
| { |
| int bpp = -1; |
| char *penv; |
| void *fb; |
| struct ctfb_res_modes mode; |
| |
| puts("Video: "); |
| |
| /* Suck display configuration from "videomode" variable */ |
| penv = getenv("videomode"); |
| if (!penv) { |
| puts("MXSFB: 'videomode' variable not set!\n"); |
| return NULL; |
| } |
| |
| bpp = video_get_params(&mode, penv); |
| |
| /* fill in Graphic device struct */ |
| sprintf(panel.modeIdent, "%dx%dx%d", |
| mode.xres, mode.yres, bpp); |
| |
| panel.winSizeX = mode.xres; |
| panel.winSizeY = mode.yres; |
| panel.plnSizeX = mode.xres; |
| panel.plnSizeY = mode.yres; |
| |
| switch (bpp) { |
| case 24: |
| case 18: |
| panel.gdfBytesPP = 4; |
| panel.gdfIndex = GDF_32BIT_X888RGB; |
| break; |
| case 16: |
| panel.gdfBytesPP = 2; |
| panel.gdfIndex = GDF_16BIT_565RGB; |
| break; |
| case 8: |
| panel.gdfBytesPP = 1; |
| panel.gdfIndex = GDF__8BIT_INDEX; |
| break; |
| default: |
| printf("MXSFB: Invalid BPP specified! (bpp = %i)\n", bpp); |
| return NULL; |
| } |
| |
| panel.memSize = mode.xres * mode.yres * panel.gdfBytesPP; |
| |
| /* Allocate framebuffer */ |
| fb = malloc(panel.memSize); |
| if (!fb) { |
| printf("MXSFB: Error allocating framebuffer!\n"); |
| return NULL; |
| } |
| |
| /* Wipe framebuffer */ |
| memset(fb, 0, panel.memSize); |
| |
| panel.frameAdrs = (u32)fb; |
| |
| printf("%s\n", panel.modeIdent); |
| |
| /* Start framebuffer */ |
| mxs_lcd_init(&panel, &mode, bpp); |
| |
| return (void *)&panel; |
| } |