src/arm64/marvell/armada-7040-mochabin.dts - filogic/uboot - Gitiles

 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
  * Device Tree file for Globalscale MOCHAbin
  * Copyright (C) 2019 Globalscale technologies, Inc.
  * Copyright (C) 2021 Sartura Ltd.
  *
  */

 /dts-v1/;

 #include <dt-bindings/gpio/gpio.h>
 #include "armada-7040.dtsi"

 / {
 	model = "Globalscale MOCHAbin";
 	compatible = "globalscale,mochabin", "marvell,armada7040",
 		     "marvell,armada-ap806-quad", "marvell,armada-ap806";

 	chosen {
 		stdout-path = "serial0:115200n8";
 	};

 	aliases {
 		ethernet0 = &cp0_eth0;
 		ethernet1 = &cp0_eth1;
 		ethernet2 = &cp0_eth2;
 		ethernet3 = &swport1;
 		ethernet4 = &swport2;
 		ethernet5 = &swport3;
 		ethernet6 = &swport4;
 	};

 	/* SFP+ 10G */
 	sfp_eth0: sfp-eth0 {
 		compatible = "sff,sfp";
 		i2c-bus = <&cp0_i2c1>;
 		los-gpios = <&sfp_gpio 3 GPIO_ACTIVE_HIGH>;
 		mod-def0-gpios = <&sfp_gpio 2 GPIO_ACTIVE_LOW>;
 		tx-disable-gpios = <&sfp_gpio 1 GPIO_ACTIVE_HIGH>;
 		tx-fault-gpios = <&sfp_gpio 0 GPIO_ACTIVE_HIGH>;
 	};

 	/* SFP 1G */
 	sfp_eth2: sfp-eth2 {
 		compatible = "sff,sfp";
 		i2c-bus = <&cp0_i2c0>;
 		los-gpios = <&sfp_gpio 7 GPIO_ACTIVE_HIGH>;
 		mod-def0-gpios = <&sfp_gpio 6 GPIO_ACTIVE_LOW>;
 		tx-disable-gpios = <&sfp_gpio 5 GPIO_ACTIVE_HIGH>;
 		tx-fault-gpios = <&sfp_gpio 4 GPIO_ACTIVE_HIGH>;
 	};
 };

 /* microUSB UART console */
 &uart0 {
 	status = "okay";

 	pinctrl-0 = <&uart0_pins>;
 	pinctrl-names = "default";
 };

 /* eMMC */
 &ap_sdhci0 {
 	status = "okay";

 	bus-width = <4>;
 	non-removable;
 	/delete-property/ marvell,xenon-phy-slow-mode;
 	no-1-8-v;
 };

 &cp0_pinctrl {
 	cp0_uart0_pins: cp0-uart0-pins {
 		marvell,pins = "mpp6", "mpp7";
 		marvell,function = "uart0";
 	};

 	cp0_spi0_pins: cp0-spi0-pins {
 		marvell,pins = "mpp56", "mpp57", "mpp58", "mpp59";
 		marvell,function = "spi0";
 	};

 	cp0_spi1_pins: cp0-spi1-pins {
 		marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
 		marvell,function = "spi1";
 	};

 	cp0_i2c0_pins: cp0-i2c0-pins {
 		marvell,pins = "mpp37", "mpp38";
 		marvell,function = "i2c0";
 	};

 	cp0_i2c1_pins: cp0-i2c1-pins {
 		marvell,pins = "mpp2", "mpp3";
 		marvell,function = "i2c1";
 	};

 	pca9554_int_pins: pca9554-int-pins {
 		marvell,pins = "mpp27";
 		marvell,function = "gpio";
 	};

 	cp0_rgmii1_pins: cp0-rgmii1-pins {
 		marvell,pins = "mpp44", "mpp45", "mpp46", "mpp47", "mpp48", "mpp49",
 			       "mpp50", "mpp51", "mpp52", "mpp53", "mpp54", "mpp55";
 		marvell,function = "ge1";
 	};

 	is31_sdb_pins: is31-sdb-pins {
 		marvell,pins = "mpp30";
 		marvell,function = "gpio";
 	};

 	cp0_pcie_reset_pins: cp0-pcie-reset-pins {
 		marvell,pins = "mpp9";
 		marvell,function = "gpio";
 	};

 	cp0_pcie_clkreq_pins: cp0-pcie-clkreq-pins {
 		marvell,pins = "mpp5";
 		marvell,function = "pcie1";
 	};

 	cp0_switch_pins: cp0-switch-pins {
 		marvell,pins = "mpp0", "mpp1";
 		marvell,function = "gpio";
 	};

 	cp0_phy_pins: cp0-phy-pins {
 		marvell,pins = "mpp12";
 		marvell,function = "gpio";
 	};
 };

 /* mikroBUS UART */
 &cp0_uart0 {
 	status = "okay";

 	pinctrl-names = "default";
 	pinctrl-0 = <&cp0_uart0_pins>;
 };

 /* mikroBUS SPI */
 &cp0_spi0 {
 	status = "okay";

 	pinctrl-names = "default";
 	pinctrl-0 = <&cp0_spi0_pins>;
 };

 /* SPI-NOR */
 &cp0_spi1 {
 	status = "okay";

 	pinctrl-names = "default";
 	pinctrl-0 = <&cp0_spi1_pins>;

 	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <20000000>;

 		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;

 			partition@0 {
 				label = "firmware";
 				reg = <0x0 0x3e0000>;
 				read-only;
 			};

 			partition@3e0000 {
 				label = "hw-info";
 				reg = <0x3e0000 0x10000>;
 				read-only;
 			};

 			partition@3f0000 {
 				label = "u-boot-env";
 				reg = <0x3f0000 0x10000>;
 			};
 		};
 	};
 };

 /* mikroBUS, 1G SFP and GPIO expander */
 &cp0_i2c0 {
 	status = "okay";

 	pinctrl-names = "default";
 	pinctrl-0 = <&cp0_i2c0_pins>;
 	clock-frequency = <100000>;

 	sfp_gpio: pca9554@39 {
 		compatible = "nxp,pca9554";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pca9554_int_pins>;
 		reg = <0x39>;

 		interrupt-parent = <&cp0_gpio1>;
 		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
 		#interrupt-cells = <2>;

 		gpio-controller;
 		#gpio-cells = <2>;

 		/*
 		 * IO0_0: SFP+_TX_FAULT
 		 * IO0_1: SFP+_TX_DISABLE
 		 * IO0_2: SFP+_PRSNT
 		 * IO0_3: SFP+_LOSS
 		 * IO0_4: SFP_TX_FAULT
 		 * IO0_5: SFP_TX_DISABLE
 		 * IO0_6: SFP_PRSNT
 		 * IO0_7: SFP_LOSS
 		 */
 	};
 };

 /* IS31FL3199, mini-PCIe and 10G SFP+ */
 &cp0_i2c1 {
 	status = "okay";

 	pinctrl-names = "default";
 	pinctrl-0 = <&cp0_i2c1_pins>;
 	clock-frequency = <100000>;

 	leds@64 {
 		compatible = "issi,is31fl3199";
 		#address-cells = <1>;
 		#size-cells = <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&is31_sdb_pins>;
 		shutdown-gpios = <&cp0_gpio1 30 GPIO_ACTIVE_HIGH>;
 		reg = <0x64>;

 		led1_red: led@1 {
 			label = "red:led1";
 			reg = <1>;
 			led-max-microamp = <20000>;
 		};

 		led1_green: led@2 {
 			label = "green:led1";
 			reg = <2>;
 		};

 		led1_blue: led@3 {
 			label = "blue:led1";
 			reg = <3>;
 		};

 		led2_red: led@4 {
 			label = "red:led2";
 			reg = <4>;
 		};

 		led2_green: led@5 {
 			label = "green:led2";
 			reg = <5>;
 		};

 		led2_blue: led@6 {
 			label = "blue:led2";
 			reg = <6>;
 		};

 		led3_red: led@7 {
 			label = "red:led3";
 			reg = <7>;
 		};

 		led3_green: led@8 {
 			label = "green:led3";
 			reg = <8>;
 		};

 		led3_blue: led@9 {
 			label = "blue:led3";
 			reg = <9>;
 		};
 	};
 };

 &cp0_mdio {
 	status = "okay";

 	/* 88E1512 PHY */
 	eth2phy: ethernet-phy@1 {
 		reg = <1>;
 		sfp = <&sfp_eth2>;

 		pinctrl-names = "default";
 		pinctrl-0 = <&cp0_phy_pins>;
 		reset-gpios = <&cp0_gpio1 12 GPIO_ACTIVE_LOW>;
 	};

 	/* 88E6141 Topaz switch */
 	switch: switch@3 {
 		compatible = "marvell,mv88e6085";
 		#address-cells = <1>;
 		#size-cells = <0>;
 		reg = <3>;

 		pinctrl-names = "default";
 		pinctrl-0 = <&cp0_switch_pins>;
 		reset-gpios = <&cp0_gpio1 0 GPIO_ACTIVE_LOW>;

 		interrupt-parent = <&cp0_gpio1>;
 		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;

 		ports {
 			#address-cells = <1>;
 			#size-cells = <0>;

 			swport1: port@1 {
 				reg = <1>;
 				label = "lan0";
 				phy-handle = <&swphy1>;
 			};

 			swport2: port@2 {
 				reg = <2>;
 				label = "lan1";
 				phy-handle = <&swphy2>;
 			};

 			swport3: port@3 {
 				reg = <3>;
 				label = "lan2";
 				phy-handle = <&swphy3>;
 			};

 			swport4: port@4 {
 				reg = <4>;
 				label = "lan3";
 				phy-handle = <&swphy4>;
 			};

 			port@5 {
 				reg = <5>;
 				label = "cpu";
 				ethernet = <&cp0_eth1>;
 				phy-mode = "2500base-x";
 				managed = "in-band-status";
 			};
 		};

 		mdio {
 			#address-cells = <1>;
 			#size-cells = <0>;

 			swphy1: swphy1@17 {
 				reg = <17>;
 			};

 			swphy2: swphy2@18 {
 				reg = <18>;
 			};

 			swphy3: swphy3@19 {
 				reg = <19>;
 			};

 			swphy4: swphy4@20 {
 				reg = <20>;
 			};
 		};
 	};
 };

 &cp0_ethernet {
 	status = "okay";
 };

 /* 10G SFP+ */
 &cp0_eth0 {
 	status = "okay";

 	phy-mode = "10gbase-r";
 	phys = <&cp0_comphy4 0>;
 	managed = "in-band-status";
 	sfp = <&sfp_eth0>;
 };

 /* Topaz switch uplink */
 &cp0_eth1 {
 	status = "okay";

 	phy-mode = "2500base-x";
 	phys = <&cp0_comphy0 1>;

 	fixed-link {
 		speed = <2500>;
 		full-duplex;
 	};
 };

 /* 1G SFP or 1G RJ45 */
 &cp0_eth2 {
 	status = "okay";

 	pinctrl-names = "default";
 	pinctrl-0 = <&cp0_rgmii1_pins>;

 	phy = <&eth2phy>;
 	phy-mode = "rgmii-id";
 };

 &cp0_utmi {
 	status = "okay";
 };

 /* SMSC USB5434B hub */
 &cp0_usb3_0 {
 	status = "okay";

 	phys = <&cp0_comphy1 0>, <&cp0_utmi0>;
 	phy-names = "cp0-usb3h0-comphy", "utmi";
 };

 /* miniPCI-E USB */
 &cp0_usb3_1 {
 	status = "okay";
 };

 &cp0_sata0 {
 	status = "okay";

 	/* 7 + 12 SATA connector (J24) */
 	sata-port@0 {
 		phys = <&cp0_comphy2 0>;
 		phy-names = "cp0-sata0-0-phy";
 	};

 	/* M.2-2250 B-key (J39) */
 	sata-port@1 {
 		phys = <&cp0_comphy3 1>;
 		phy-names = "cp0-sata0-1-phy";
 	};
 };

 /* miniPCI-E (J5) */
 &cp0_pcie2 {
 	status = "okay";

 	pinctrl-names = "default", "clkreq";
 	pinctrl-0 = <&cp0_pcie_reset_pins>;
 	pinctrl-1 = <&cp0_pcie_clkreq_pins>;
 	phys = <&cp0_comphy5 2>;
 	phy-names = "cp0-pcie2-x1-phy";
 	reset-gpios = <&cp0_gpio1 9 GPIO_ACTIVE_LOW>;
 	ranges = <0x82000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x8000000>;
 };
	// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
	/*
	* Device Tree file for Globalscale MOCHAbin
	* Copyright (C) 2019 Globalscale technologies, Inc.
	* Copyright (C) 2021 Sartura Ltd.
	*
	*/

	/dts-v1/;

	#include <dt-bindings/gpio/gpio.h>
	#include "armada-7040.dtsi"

	/ {
	model = "Globalscale MOCHAbin";
	compatible = "globalscale,mochabin", "marvell,armada7040",
	"marvell,armada-ap806-quad", "marvell,armada-ap806";

	chosen {
	stdout-path = "serial0:115200n8";
	};

	aliases {
	ethernet0 = &cp0_eth0;
	ethernet1 = &cp0_eth1;
	ethernet2 = &cp0_eth2;
	ethernet3 = &swport1;
	ethernet4 = &swport2;
	ethernet5 = &swport3;
	ethernet6 = &swport4;
	};

	/* SFP+ 10G */
	sfp_eth0: sfp-eth0 {
	compatible = "sff,sfp";
	i2c-bus = <&cp0_i2c1>;
	los-gpios = <&sfp_gpio 3 GPIO_ACTIVE_HIGH>;
	mod-def0-gpios = <&sfp_gpio 2 GPIO_ACTIVE_LOW>;
	tx-disable-gpios = <&sfp_gpio 1 GPIO_ACTIVE_HIGH>;
	tx-fault-gpios = <&sfp_gpio 0 GPIO_ACTIVE_HIGH>;
	};

	/* SFP 1G */
	sfp_eth2: sfp-eth2 {
	compatible = "sff,sfp";
	i2c-bus = <&cp0_i2c0>;
	los-gpios = <&sfp_gpio 7 GPIO_ACTIVE_HIGH>;
	mod-def0-gpios = <&sfp_gpio 6 GPIO_ACTIVE_LOW>;
	tx-disable-gpios = <&sfp_gpio 5 GPIO_ACTIVE_HIGH>;
	tx-fault-gpios = <&sfp_gpio 4 GPIO_ACTIVE_HIGH>;
	};
	};

	/* microUSB UART console */
	&uart0 {
	status = "okay";

	pinctrl-0 = <&uart0_pins>;
	pinctrl-names = "default";
	};

	/* eMMC */
	&ap_sdhci0 {
	status = "okay";

	bus-width = <4>;
	non-removable;
	/delete-property/ marvell,xenon-phy-slow-mode;
	no-1-8-v;
	};

	&cp0_pinctrl {
	cp0_uart0_pins: cp0-uart0-pins {
	marvell,pins = "mpp6", "mpp7";
	marvell,function = "uart0";
	};

	cp0_spi0_pins: cp0-spi0-pins {
	marvell,pins = "mpp56", "mpp57", "mpp58", "mpp59";
	marvell,function = "spi0";
	};

	cp0_spi1_pins: cp0-spi1-pins {
	marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
	marvell,function = "spi1";
	};

	cp0_i2c0_pins: cp0-i2c0-pins {
	marvell,pins = "mpp37", "mpp38";
	marvell,function = "i2c0";
	};

	cp0_i2c1_pins: cp0-i2c1-pins {
	marvell,pins = "mpp2", "mpp3";
	marvell,function = "i2c1";
	};

	pca9554_int_pins: pca9554-int-pins {
	marvell,pins = "mpp27";
	marvell,function = "gpio";
	};

	cp0_rgmii1_pins: cp0-rgmii1-pins {
	marvell,pins = "mpp44", "mpp45", "mpp46", "mpp47", "mpp48", "mpp49",
	"mpp50", "mpp51", "mpp52", "mpp53", "mpp54", "mpp55";
	marvell,function = "ge1";
	};

	is31_sdb_pins: is31-sdb-pins {
	marvell,pins = "mpp30";
	marvell,function = "gpio";
	};

	cp0_pcie_reset_pins: cp0-pcie-reset-pins {
	marvell,pins = "mpp9";
	marvell,function = "gpio";
	};

	cp0_pcie_clkreq_pins: cp0-pcie-clkreq-pins {
	marvell,pins = "mpp5";
	marvell,function = "pcie1";
	};

	cp0_switch_pins: cp0-switch-pins {
	marvell,pins = "mpp0", "mpp1";
	marvell,function = "gpio";
	};

	cp0_phy_pins: cp0-phy-pins {
	marvell,pins = "mpp12";
	marvell,function = "gpio";
	};
	};

	/* mikroBUS UART */
	&cp0_uart0 {
	status = "okay";

	pinctrl-names = "default";
	pinctrl-0 = <&cp0_uart0_pins>;
	};

	/* mikroBUS SPI */
	&cp0_spi0 {
	status = "okay";

	pinctrl-names = "default";
	pinctrl-0 = <&cp0_spi0_pins>;
	};

	/* SPI-NOR */
	&cp0_spi1 {
	status = "okay";

	pinctrl-names = "default";
	pinctrl-0 = <&cp0_spi1_pins>;

	flash@0 {
	#address-cells = <1>;
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	spi-max-frequency = <20000000>;

	partitions {
	compatible = "fixed-partitions";
	#address-cells = <1>;
	#size-cells = <1>;

	partition@0 {
	label = "firmware";
	reg = <0x0 0x3e0000>;
	read-only;
	};

	partition@3e0000 {
	label = "hw-info";
	reg = <0x3e0000 0x10000>;
	read-only;
	};

	partition@3f0000 {
	label = "u-boot-env";
	reg = <0x3f0000 0x10000>;
	};
	};
	};
	};

	/* mikroBUS, 1G SFP and GPIO expander */
	&cp0_i2c0 {
	status = "okay";

	pinctrl-names = "default";
	pinctrl-0 = <&cp0_i2c0_pins>;
	clock-frequency = <100000>;

	sfp_gpio: pca9554@39 {
	compatible = "nxp,pca9554";
	pinctrl-names = "default";
	pinctrl-0 = <&pca9554_int_pins>;
	reg = <0x39>;

	interrupt-parent = <&cp0_gpio1>;
	interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
	interrupt-controller;
	#interrupt-cells = <2>;

	gpio-controller;
	#gpio-cells = <2>;

	/*
	* IO0_0: SFP+_TX_FAULT
	* IO0_1: SFP+_TX_DISABLE
	* IO0_2: SFP+_PRSNT
	* IO0_3: SFP+_LOSS
	* IO0_4: SFP_TX_FAULT
	* IO0_5: SFP_TX_DISABLE
	* IO0_6: SFP_PRSNT
	* IO0_7: SFP_LOSS
	*/
	};
	};

	/* IS31FL3199, mini-PCIe and 10G SFP+ */
	&cp0_i2c1 {
	status = "okay";

	pinctrl-names = "default";
	pinctrl-0 = <&cp0_i2c1_pins>;
	clock-frequency = <100000>;

	leds@64 {
	compatible = "issi,is31fl3199";
	#address-cells = <1>;
	#size-cells = <0>;
	pinctrl-names = "default";
	pinctrl-0 = <&is31_sdb_pins>;
	shutdown-gpios = <&cp0_gpio1 30 GPIO_ACTIVE_HIGH>;
	reg = <0x64>;

	led1_red: led@1 {
	label = "red:led1";
	reg = <1>;
	led-max-microamp = <20000>;
	};

	led1_green: led@2 {
	label = "green:led1";
	reg = <2>;
	};

	led1_blue: led@3 {
	label = "blue:led1";
	reg = <3>;
	};

	led2_red: led@4 {
	label = "red:led2";
	reg = <4>;
	};

	led2_green: led@5 {
	label = "green:led2";
	reg = <5>;
	};

	led2_blue: led@6 {
	label = "blue:led2";
	reg = <6>;
	};

	led3_red: led@7 {
	label = "red:led3";
	reg = <7>;
	};

	led3_green: led@8 {
	label = "green:led3";
	reg = <8>;
	};

	led3_blue: led@9 {
	label = "blue:led3";
	reg = <9>;
	};
	};
	};

	&cp0_mdio {
	status = "okay";

	/* 88E1512 PHY */
	eth2phy: ethernet-phy@1 {
	reg = <1>;
	sfp = <&sfp_eth2>;

	pinctrl-names = "default";
	pinctrl-0 = <&cp0_phy_pins>;
	reset-gpios = <&cp0_gpio1 12 GPIO_ACTIVE_LOW>;
	};

	/* 88E6141 Topaz switch */
	switch: switch@3 {
	compatible = "marvell,mv88e6085";
	#address-cells = <1>;
	#size-cells = <0>;
	reg = <3>;

	pinctrl-names = "default";
	pinctrl-0 = <&cp0_switch_pins>;
	reset-gpios = <&cp0_gpio1 0 GPIO_ACTIVE_LOW>;

	interrupt-parent = <&cp0_gpio1>;
	interrupts = <1 IRQ_TYPE_LEVEL_LOW>;

	ports {
	#address-cells = <1>;
	#size-cells = <0>;

	swport1: port@1 {
	reg = <1>;
	label = "lan0";
	phy-handle = <&swphy1>;
	};

	swport2: port@2 {
	reg = <2>;
	label = "lan1";
	phy-handle = <&swphy2>;
	};

	swport3: port@3 {
	reg = <3>;
	label = "lan2";
	phy-handle = <&swphy3>;
	};

	swport4: port@4 {
	reg = <4>;
	label = "lan3";
	phy-handle = <&swphy4>;
	};

	port@5 {
	reg = <5>;
	label = "cpu";
	ethernet = <&cp0_eth1>;
	phy-mode = "2500base-x";
	managed = "in-band-status";
	};
	};

	mdio {
	#address-cells = <1>;
	#size-cells = <0>;

	swphy1: swphy1@17 {
	reg = <17>;
	};

	swphy2: swphy2@18 {
	reg = <18>;
	};

	swphy3: swphy3@19 {
	reg = <19>;
	};

	swphy4: swphy4@20 {
	reg = <20>;
	};
	};
	};
	};

	&cp0_ethernet {
	status = "okay";
	};

	/* 10G SFP+ */
	&cp0_eth0 {
	status = "okay";

	phy-mode = "10gbase-r";
	phys = <&cp0_comphy4 0>;
	managed = "in-band-status";
	sfp = <&sfp_eth0>;
	};

	/* Topaz switch uplink */
	&cp0_eth1 {
	status = "okay";

	phy-mode = "2500base-x";
	phys = <&cp0_comphy0 1>;

	fixed-link {
	speed = <2500>;
	full-duplex;
	};
	};

	/* 1G SFP or 1G RJ45 */
	&cp0_eth2 {
	status = "okay";

	pinctrl-names = "default";
	pinctrl-0 = <&cp0_rgmii1_pins>;

	phy = <&eth2phy>;
	phy-mode = "rgmii-id";
	};

	&cp0_utmi {
	status = "okay";
	};

	/* SMSC USB5434B hub */
	&cp0_usb3_0 {
	status = "okay";

	phys = <&cp0_comphy1 0>, <&cp0_utmi0>;
	phy-names = "cp0-usb3h0-comphy", "utmi";
	};

	/* miniPCI-E USB */
	&cp0_usb3_1 {
	status = "okay";
	};

	&cp0_sata0 {
	status = "okay";

	/* 7 + 12 SATA connector (J24) */
	sata-port@0 {
	phys = <&cp0_comphy2 0>;
	phy-names = "cp0-sata0-0-phy";
	};

	/* M.2-2250 B-key (J39) */
	sata-port@1 {
	phys = <&cp0_comphy3 1>;
	phy-names = "cp0-sata0-1-phy";
	};
	};

	/* miniPCI-E (J5) */
	&cp0_pcie2 {
	status = "okay";

	pinctrl-names = "default", "clkreq";
	pinctrl-0 = <&cp0_pcie_reset_pins>;
	pinctrl-1 = <&cp0_pcie_clkreq_pins>;
	phys = <&cp0_comphy5 2>;
	phy-names = "cp0-pcie2-x1-phy";
	reset-gpios = <&cp0_gpio1 9 GPIO_ACTIVE_LOW>;
	ranges = <0x82000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x8000000>;
	};