Squashed 'dts/upstream/' content from commit aaba2d45dc2a
git-subtree-dir: dts/upstream
git-subtree-split: aaba2d45dc2a1b3bbb710f2a3808ee1c9f340abe
diff --git a/src/arm/ti/omap/omap3-igep0030-rev-g.dts b/src/arm/ti/omap/omap3-igep0030-rev-g.dts
new file mode 100644
index 0000000..fddd7c8
--- /dev/null
+++ b/src/arm/ti/omap/omap3-igep0030-rev-g.dts
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree Source for IGEP COM MODULE Rev. G (TI OMAP AM/DM37x)
+ *
+ * Copyright (C) 2014 Javier Martinez Canillas <javier@dowhile0.org>
+ * Copyright (C) 2014 Enric Balletbo i Serra <eballetbo@gmail.com>
+ */
+
+#include "omap3-igep0030-common.dtsi"
+
+/ {
+ model = "IGEP COM MODULE Rev. G (TI OMAP AM/DM37x)";
+ compatible = "isee,omap3-igep0030-rev-g", "ti,omap3630", "ti,omap3";
+
+ /* Regulator to trigger the WL_EN signal of the Wifi module */
+ lbep5clwmc_wlen: regulator-lbep5clwmc-wlen {
+ compatible = "regulator-fixed";
+ regulator-name = "regulator-lbep5clwmc-wlen";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio5 11 GPIO_ACTIVE_HIGH>; /* gpio_139 - WL_EN */
+ enable-active-high;
+ };
+};
+
+&omap3_pmx_core {
+ lbep5clwmc_pins: lbep5clwmc-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT | MUX_MODE4) /* sdmmc2_dat4.gpio_136 - W_IRQ */
+ OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat5.gpio_137 - BT_EN */
+ OMAP3_CORE1_IOPAD(0x216a, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat7.gpio_139 - WL_EN */
+ >;
+ };
+
+ leds_pins: leds-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21be, PIN_OUTPUT | MUX_MODE4) /* i2c2_scl.gpio_168 */
+ >;
+ };
+
+};
+
+&i2c2 {
+ status = "disabled";
+};
+
+&leds {
+ pinctrl-names = "default";
+ pinctrl-0 = <&leds_pins &leds_core2_pins>;
+
+ boot {
+ label = "omap3:green:boot";
+ gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins &lbep5clwmc_pins>;
+ vmmc-supply = <&lbep5clwmc_wlen>;
+ bus-width = <4>;
+ non-removable;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ wlcore: wlcore@2 {
+ compatible = "ti,wl1835";
+ reg = <2>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <8 IRQ_TYPE_EDGE_RISING>; /* gpio 136 */
+ };
+};
+
+&uart2 {
+ bluetooth {
+ compatible = "ti,wl1835-st";
+ enable-gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>; /* gpio 137 */
+ max-speed = <300000>;
+ };
+};