Squashed 'dts/upstream/' content from commit aaba2d45dc2a
git-subtree-dir: dts/upstream
git-subtree-split: aaba2d45dc2a1b3bbb710f2a3808ee1c9f340abe
diff --git a/src/arm/ti/omap/omap3-gta04a5.dts b/src/arm/ti/omap/omap3-gta04a5.dts
new file mode 100644
index 0000000..8bd6b4b
--- /dev/null
+++ b/src/arm/ti/omap/omap3-gta04a5.dts
@@ -0,0 +1,152 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014-18 H. Nikolaus Schaller <hns@goldelico.com>
+ */
+
+#include "omap3-gta04.dtsi"
+
+/ {
+ model = "Goldelico GTA04A5/Letux 2804";
+
+ sound {
+ ti,jack-det-gpio = <&twl_gpio 2 GPIO_ACTIVE_HIGH>; /* GTA04A5 only */
+ };
+
+ wlan_en: wlan_en_regulator {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wlan_pins>;
+ regulator-name = "wlan-en-regulator";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>; /* GPIO_138 */
+
+ startup-delay-us = <70000>;
+ enable-active-high;
+ };
+
+ pps {
+ compatible = "pps-gpio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pps_pins>;
+
+ gpios = <&gpio4 18 GPIO_ACTIVE_HIGH>; /* GPIN_114 */
+ };
+
+};
+
+&gpio5 {
+ irda-en-hog {
+ gpio-hog;
+ gpios = <(175-160) GPIO_ACTIVE_HIGH>;
+ output-high; /* activate gpio_175 to disable IrDA receiver */
+ };
+};
+
+&omap3_pmx_core {
+ bt_pins: bt-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE4) /* mmc2_dat5 = mmc3_dat1 = gpio137 */
+ >;
+ };
+
+ wlan_pins: wlan-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE4) /* mmc2_dat6 = mmc3_dat2 = gpio138 */
+ >;
+ };
+
+ wlan_irq_pin: wlan-irq-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE4) /* mmc2_dat7 = mmc3_dat3 = gpio139 */
+ >;
+ };
+
+ irda_pins: irda-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21d0, PIN_OUTPUT_PULLUP | MUX_MODE4) /* mcspi1_cs1 = gpio175 */
+ >;
+ };
+
+ pps_pins: pps-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2138, PIN_INPUT | MUX_MODE4) /* gpin114 */
+ >;
+ };
+
+ bno050_pins: pinmux-bno050-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2136, PIN_INPUT | MUX_MODE4) /* gpin113 */
+ >;
+ };
+};
+
+/*
+ * for WL183x module see
+ * Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml
+ */
+
+&wifi_pwrseq {
+ /delete-property/ reset-gpios;
+};
+
+&mmc2 {
+ vmmc-supply = <&wlan_en>;
+ bus-width = <4>;
+ cap-power-off-card;
+ non-removable;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&wlan_irq_pin>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /delete-property/ mmc-pwrseq;
+
+ wlcore: wlcore@2 {
+ compatible = "ti,wl1837";
+ reg = <2>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; /* GPIO_139 */
+ ref-clock-frequency = <26000000>;
+ };
+};
+
+&i2c2 {
+ /delete-node/ bmp085@77;
+ /delete-node/ bma180@41;
+ /delete-node/ itg3200@68;
+ /delete-node/ hmc5843@1e;
+
+ gyrometer@69 {
+ compatible = "bosch,bmg160";
+ reg = <0x69>;
+ };
+
+ accelerometer@10 {
+ compatible = "bosch,bmc150_accel";
+ reg = <0x10>;
+ };
+
+ magnetometer@12 {
+ compatible = "bosch,bmc150_magn";
+ reg = <0x12>;
+ };
+
+ bme280@76 {
+ compatible = "bosch,bme280";
+ reg = <0x76>;
+ vdda-supply = <&vio>;
+ vddd-supply = <&vio>;
+ };
+
+ imu@29 {
+ compatible = "bosch,bno055";
+ reg = <0x29>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&bno050_pins>;
+ /* interrupt at &gpio4 17 */
+ };
+};