Squashed 'dts/upstream/' content from commit aaba2d45dc2a
git-subtree-dir: dts/upstream
git-subtree-split: aaba2d45dc2a1b3bbb710f2a3808ee1c9f340abe
diff --git a/src/arm/ti/omap/dra62x-j5eco-evm.dts b/src/arm/ti/omap/dra62x-j5eco-evm.dts
new file mode 100644
index 0000000..2f6ac26
--- /dev/null
+++ b/src/arm/ti/omap/dra62x-j5eco-evm.dts
@@ -0,0 +1,144 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include "dra62x.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ model = "DRA62x J5 Eco EVM";
+ compatible = "ti,dra62x-j5eco-evm", "ti,dra62x", "ti,dm8148", "ti,dm814";
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x40000000>; /* 1 GB */
+ };
+
+ /* MIC94060YC6 controlled by SD1_POW pin */
+ vmmcsd_fixed: fixedregulator0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmcsd_fixed";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+};
+
+&cpsw_emac0 {
+ phy-handle = <ðphy0>;
+ phy-mode = "rgmii-id";
+};
+
+&cpsw_emac1 {
+ phy-handle = <ðphy1>;
+ phy-mode = "rgmii-id";
+};
+
+&davinci_mdio {
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
+&gpmc {
+ ranges = <0 0 0x04000000 0x01000000>; /* CS0: 16MB for NAND */
+
+ nand@0,0 {
+ compatible = "ti,omap2-nand";
+ reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+ interrupt-parent = <&gpmc>;
+ interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+ <1 IRQ_TYPE_NONE>; /* termcount */
+ linux,mtd-name = "micron,mt29f2g16aadwp";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ti,nand-ecc-opt = "bch8";
+ nand-bus-width = <16>;
+ gpmc,device-width = <2>;
+ gpmc,sync-clk-ps = <0>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <44>;
+ gpmc,cs-wr-off-ns = <44>;
+ gpmc,adv-on-ns = <6>;
+ gpmc,adv-rd-off-ns = <34>;
+ gpmc,adv-wr-off-ns = <44>;
+ gpmc,we-on-ns = <0>;
+ gpmc,we-off-ns = <40>;
+ gpmc,oe-on-ns = <0>;
+ gpmc,oe-off-ns = <54>;
+ gpmc,access-ns = <64>;
+ gpmc,rd-cycle-ns = <82>;
+ gpmc,wr-cycle-ns = <82>;
+ gpmc,bus-turnaround-ns = <0>;
+ gpmc,cycle2cycle-delay-ns = <0>;
+ gpmc,clk-activation-ns = <0>;
+ gpmc,wr-access-ns = <40>;
+ gpmc,wr-data-mux-bus-ns = <0>;
+ partition@0 {
+ label = "X-Loader";
+ reg = <0 0x80000>;
+ };
+ partition@80000 {
+ label = "U-Boot";
+ reg = <0x80000 0x1c0000>;
+ };
+ partition@1c0000 {
+ label = "Environment";
+ reg = <0x240000 0x40000>;
+ };
+ partition@280000 {
+ label = "Kernel";
+ reg = <0x280000 0x500000>;
+ };
+ partition@780000 {
+ label = "Filesystem";
+ reg = <0x780000 0xf880000>;
+ };
+ };
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd1_pins>;
+ vmmc-supply = <&vmmcsd_fixed>;
+ bus-width = <4>;
+ cd-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
+};
+
+&pincntl {
+ sd1_pins: sd1-pins {
+ pinctrl-single,pins = <
+ DM814X_IOPAD(0x0800, PIN_INPUT | 0x1) /* SD1_CLK */
+ DM814X_IOPAD(0x0804, PIN_INPUT_PULLUP | 0x1) /* SD1_CMD */
+ DM814X_IOPAD(0x0808, PIN_INPUT_PULLUP | 0x1) /* SD1_DAT[0] */
+ DM814X_IOPAD(0x080c, PIN_INPUT_PULLUP | 0x1) /* SD1_DAT[1] */
+ DM814X_IOPAD(0x0810, PIN_INPUT_PULLUP | 0x1) /* SD1_DAT[2] */
+ DM814X_IOPAD(0x0814, PIN_INPUT_PULLUP | 0x1) /* SD1_DAT[3] */
+ DM814X_IOPAD(0x0924, PIN_OUTPUT | 0x40) /* SD1_POW */
+ DM814X_IOPAD(0x093C, PIN_INPUT_PULLUP | 0x80) /* GP1[6] */
+ >;
+ };
+
+ usb0_pins: usb0-pins {
+ pinctrl-single,pins = <
+ DM814X_IOPAD(0x0c34, PIN_OUTPUT | 0x1) /* USB0_DRVVBUS */
+ >;
+ };
+};
+
+/* USB0_ID pin state: SW10[1] = 0 cable detection, SW10[1] = 1 ID grounded */
+&usb0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_pins>;
+ dr_mode = "otg";
+};
+
+&usb1_phy {
+ status = "disabled";
+};
+
+&usb1 {
+ status = "disabled";
+};