Squashed 'dts/upstream/' content from commit aaba2d45dc2a
git-subtree-dir: dts/upstream
git-subtree-split: aaba2d45dc2a1b3bbb710f2a3808ee1c9f340abe
diff --git a/Bindings/pinctrl/qcom,tlmm-common.yaml b/Bindings/pinctrl/qcom,tlmm-common.yaml
new file mode 100644
index 0000000..aae3dcf
--- /dev/null
+++ b/Bindings/pinctrl/qcom,tlmm-common.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,tlmm-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. Top Level Mode Multiplexer (TLMM) definitions
+
+maintainers:
+ - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+ This defines the common properties used to describe all Qualcomm Top Level
+ Mode Multiplexer bindings and pinconf/pinmux states for these.
+
+properties:
+ interrupts:
+ description:
+ TLMM summary IRQ and dirconn interrupts.
+ minItems: 1
+ maxItems: 9
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ description:
+ Specifies the PIN numbers and Flags, as defined in defined in
+ include/dt-bindings/interrupt-controller/irq.h
+ const: 2
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ description:
+ Specifying the pin number and flags, as defined in
+ include/dt-bindings/gpio/gpio.h
+ const: 2
+
+ gpio-ranges:
+ maxItems: 1
+
+ wakeup-parent:
+ description:
+ Specifying the interrupt-controller used to wake up the system when the
+ TLMM block has been powered down.
+
+ gpio-reserved-ranges:
+ description:
+ Pins can be reserved for trusted applications and thereby unaccessible
+ from the OS. This property can be used to mark the pins which resources
+ should not be accessed by the OS. Please see the ../gpio/gpio.txt for more
+ information.
+
+allOf:
+ - $ref: pinctrl.yaml#
+
+required:
+ - interrupts
+ - interrupt-controller
+ - '#interrupt-cells'
+ - gpio-controller
+ - '#gpio-cells'
+ - gpio-ranges
+
+additionalProperties: true
+
+$defs:
+ qcom-tlmm-state:
+ properties:
+ drive-strength:
+ enum: [2, 4, 6, 8, 10, 12, 14, 16]
+ description:
+ Selects the drive strength for the specified pins, in mA.
+
+ bias-pull-down: true
+ bias-pull-up: true
+ bias-disable: true
+ input-enable: false
+ output-disable: true
+ output-enable: true
+ output-high: true
+ output-low: true
+
+ allOf:
+ - $ref: pincfg-node.yaml#
+ - $ref: pinmux-node.yaml#
+
+ - if:
+ properties:
+ pins:
+ items:
+ pattern: "^gpio"
+ then:
+ required:
+ - function
+ else:
+ properties:
+ function: false
+
+ additionalProperties: true
+...