diff --git a/Bindings/pinctrl/qcom,tlmm-common.yaml b/Bindings/pinctrl/qcom,tlmm-common.yaml
new file mode 100644
index 0000000..aae3dcf
--- /dev/null
+++ b/Bindings/pinctrl/qcom,tlmm-common.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,tlmm-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. Top Level Mode Multiplexer (TLMM) definitions
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+  This defines the common properties used to describe all Qualcomm Top Level
+  Mode Multiplexer bindings and pinconf/pinmux states for these.
+
+properties:
+  interrupts:
+    description:
+      TLMM summary IRQ and dirconn interrupts.
+    minItems: 1
+    maxItems: 9
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    description:
+      Specifies the PIN numbers and Flags, as defined in defined in
+      include/dt-bindings/interrupt-controller/irq.h
+    const: 2
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    description:
+      Specifying the pin number and flags, as defined in
+      include/dt-bindings/gpio/gpio.h
+    const: 2
+
+  gpio-ranges:
+    maxItems: 1
+
+  wakeup-parent:
+    description:
+      Specifying the interrupt-controller used to wake up the system when the
+      TLMM block has been powered down.
+
+  gpio-reserved-ranges:
+    description:
+      Pins can be reserved for trusted applications and thereby unaccessible
+      from the OS.  This property can be used to mark the pins which resources
+      should not be accessed by the OS. Please see the ../gpio/gpio.txt for more
+      information.
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+required:
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+
+additionalProperties: true
+
+$defs:
+  qcom-tlmm-state:
+    properties:
+      drive-strength:
+        enum: [2, 4, 6, 8, 10, 12, 14, 16]
+        description:
+          Selects the drive strength for the specified pins, in mA.
+
+      bias-pull-down: true
+      bias-pull-up: true
+      bias-disable: true
+      input-enable: false
+      output-disable: true
+      output-enable: true
+      output-high: true
+      output-low: true
+
+    allOf:
+      - $ref: pincfg-node.yaml#
+      - $ref: pinmux-node.yaml#
+
+      - if:
+          properties:
+            pins:
+              items:
+                pattern: "^gpio"
+        then:
+          required:
+            - function
+        else:
+          properties:
+            function: false
+
+    additionalProperties: true
+...