Squashed 'dts/upstream/' content from commit aaba2d45dc2a
git-subtree-dir: dts/upstream
git-subtree-split: aaba2d45dc2a1b3bbb710f2a3808ee1c9f340abe
diff --git a/Bindings/phy/nvidia,tegra210-xusb-padctl.yaml b/Bindings/phy/nvidia,tegra210-xusb-padctl.yaml
new file mode 100644
index 0000000..e9237c5
--- /dev/null
+++ b/Bindings/phy/nvidia,tegra210-xusb-padctl.yaml
@@ -0,0 +1,786 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/nvidia,tegra210-xusb-padctl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra210 XUSB pad controller
+
+maintainers:
+ - Thierry Reding <thierry.reding@gmail.com>
+ - Jon Hunter <jonathanh@nvidia.com>
+
+description: |
+ The Tegra XUSB pad controller manages a set of I/O lanes (with differential
+ signals) which connect directly to pins/pads on the SoC package. Each lane
+ is controlled by a HW block referred to as a "pad" in the Tegra hardware
+ documentation. Each such "pad" may control either one or multiple lanes,
+ and thus contains any logic common to all its lanes. Each lane can be
+ separately configured and powered up.
+
+ Some of the lanes are high-speed lanes, which can be used for PCIe, SATA or
+ super-speed USB. Other lanes are for various types of low-speed, full-speed
+ or high-speed USB (such as UTMI, ULPI and HSIC). The XUSB pad controller
+ contains a software-configurable mux that sits between the I/O controller
+ ports (e.g. PCIe) and the lanes.
+
+ In addition to per-lane configuration, USB 3.0 ports may require additional
+ settings on a per-board basis.
+
+ Pads will be represented as children of the top-level XUSB pad controller
+ device tree node. Each lane exposed by the pad will be represented by its
+ own subnode and can be referenced by users of the lane using the standard
+ PHY bindings, as described by the phy-bindings.txt file in this directory.
+
+ The Tegra hardware documentation refers to the connection between the XUSB
+ pad controller and the XUSB controller as "ports". This is confusing since
+ "port" is typically used to denote the physical USB receptacle. The device
+ tree binding in this document uses the term "port" to refer to the logical
+ abstraction of the signals that are routed to a USB receptacle (i.e. a PHY
+ for the USB signal, the VBUS power supply, the USB 2.0 companion port for
+ USB 3.0 receptacles, ...).
+
+properties:
+ compatible:
+ const: nvidia,tegra210-xusb-padctl
+
+ reg:
+ maxItems: 1
+
+ resets:
+ items:
+ - description: pad controller reset
+
+ interrupts:
+ items:
+ - description: XUSB pad controller interrupt
+
+ reset-names:
+ items:
+ - const: padctl
+
+ avdd-pll-utmip-supply:
+ description: UTMI PLL power supply. Must supply 1.8 V.
+
+ avdd-pll-uerefe-supply:
+ description: PLLE reference PLL power supply. Must supply 1.05 V.
+
+ dvdd-pex-pll-supply:
+ description: PCIe/USB3 PLL power supply. Must supply 1.05 V.
+
+ hvdd-pex-pll-e-supply:
+ description: High-voltage PLLE power supply. Must supply 1.8 V.
+
+ nvidia,pmc:
+ description: phandle to the Tegra Power Management Controller (PMC) node
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+ pads:
+ description: A required child node named "pads" contains a list of
+ subnodes, one for each of the pads exposed by the XUSB pad controller.
+ Each pad may need additional resources that can be referenced in its
+ pad node.
+
+ The "status" property is used to enable or disable the use of a pad.
+ If set to "disabled", the pad will not be used on the given board. In
+ order to use the pad and any of its lanes, this property must be set
+ to "okay" or be absent.
+ type: object
+ additionalProperties: false
+ properties:
+ usb2:
+ type: object
+ additionalProperties: false
+ properties:
+ clocks:
+ items:
+ - description: USB2 tracking clock
+
+ clock-names:
+ items:
+ - const: trk
+
+ lanes:
+ type: object
+ additionalProperties: false
+ properties:
+ usb2-0:
+ type: object
+ additionalProperties: false
+ properties:
+ "#phy-cells":
+ const: 0
+
+ nvidia,function:
+ description: Function selection for this lane.
+ $ref: /schemas/types.yaml#/definitions/string
+ enum: [ snps, xusb, uart ]
+
+ usb2-1:
+ type: object
+ additionalProperties: false
+ properties:
+ "#phy-cells":
+ const: 0
+
+ nvidia,function:
+ description: Function selection for this lane.
+ $ref: /schemas/types.yaml#/definitions/string
+ enum: [ snps, xusb, uart ]
+
+ usb2-2:
+ type: object
+ additionalProperties: false
+ properties:
+ "#phy-cells":
+ const: 0
+
+ nvidia,function:
+ description: Function selection for this lane.
+ $ref: /schemas/types.yaml#/definitions/string
+ enum: [ snps, xusb, uart ]
+
+ usb2-3:
+ type: object
+ additionalProperties: false
+ properties:
+ "#phy-cells":
+ const: 0
+
+ nvidia,function:
+ description: Function selection for this lane.
+ $ref: /schemas/types.yaml#/definitions/string
+ enum: [ snps, xusb, uart ]
+
+ hsic:
+ type: object
+ additionalProperties: false
+ properties:
+ clocks:
+ items:
+ - description: HSIC tracking clock
+
+ clock-names:
+ items:
+ - const: trk
+
+ lanes:
+ type: object
+ additionalProperties: false
+ properties:
+ hsic-0:
+ type: object
+ additionalProperties: false
+ properties:
+ "#phy-cells":
+ const: 0
+
+ nvidia,function:
+ description: Function selection for this lane.
+ $ref: /schemas/types.yaml#/definitions/string
+ enum: [ snps, xusb ]
+
+ hsic-1:
+ type: object
+ additionalProperties: false
+ properties:
+ "#phy-cells":
+ const: 0
+
+ nvidia,function:
+ description: Function selection for this lane.
+ $ref: /schemas/types.yaml#/definitions/string
+ enum: [ snps, xusb ]
+
+ pcie:
+ type: object
+ additionalProperties: false
+ properties:
+ clocks:
+ items:
+ - description: PCIe PLL clock source
+
+ clock-names:
+ items:
+ - const: pll
+
+ resets:
+ items:
+ - description: PCIe PHY reset
+
+ reset-names:
+ items:
+ - const: phy
+
+ lanes:
+ type: object
+ additionalProperties: false
+ properties:
+ pcie-0:
+ type: object
+ additionalProperties: false
+ properties:
+ "#phy-cells":
+ const: 0
+
+ nvidia,function:
+ description: Function selection for this lane.
+ $ref: /schemas/types.yaml#/definitions/string
+ enum: [ pcie-x1, usb3-ss, pcie-x4 ]
+
+ pcie-1:
+ type: object
+ additionalProperties: false
+ properties:
+ "#phy-cells":
+ const: 0
+
+ nvidia,function:
+ description: Function selection for this lane.
+ $ref: /schemas/types.yaml#/definitions/string
+ enum: [ pcie-x1, usb3-ss, pcie-x4 ]
+
+ pcie-2:
+ type: object
+ additionalProperties: false
+ properties:
+ "#phy-cells":
+ const: 0
+
+ nvidia,function:
+ description: Function selection for this lane.
+ $ref: /schemas/types.yaml#/definitions/string
+ enum: [ pcie-x1, usb3-ss, pcie-x4 ]
+
+ pcie-3:
+ type: object
+ additionalProperties: false
+ properties:
+ "#phy-cells":
+ const: 0
+
+ nvidia,function:
+ description: Function selection for this lane.
+ $ref: /schemas/types.yaml#/definitions/string
+ enum: [ pcie-x1, usb3-ss, pcie-x4 ]
+
+ pcie-4:
+ type: object
+ additionalProperties: false
+ properties:
+ "#phy-cells":
+ const: 0
+
+ nvidia,function:
+ description: Function selection for this lane.
+ $ref: /schemas/types.yaml#/definitions/string
+ enum: [ pcie-x1, usb3-ss, pcie-x4 ]
+
+ pcie-5:
+ type: object
+ additionalProperties: false
+ properties:
+ "#phy-cells":
+ const: 0
+
+ nvidia,function:
+ description: Function selection for this lane.
+ $ref: /schemas/types.yaml#/definitions/string
+ enum: [ pcie-x1, usb3-ss, pcie-x4 ]
+
+ pcie-6:
+ type: object
+ additionalProperties: false
+ properties:
+ "#phy-cells":
+ const: 0
+
+ nvidia,function:
+ description: Function selection for this lane.
+ $ref: /schemas/types.yaml#/definitions/string
+ enum: [ pcie-x1, usb3-ss, pcie-x4 ]
+
+ sata:
+ type: object
+ additionalProperties: false
+ properties:
+ clocks:
+ items:
+ - description: SATA PLL clock source
+
+ clock-names:
+ items:
+ - const: pll
+
+ resets:
+ items:
+ - description: SATA PHY reset
+
+ reset-names:
+ items:
+ - const: phy
+
+ lanes:
+ type: object
+ additionalProperties: false
+ properties:
+ sata-0:
+ type: object
+ additionalProperties: false
+ properties:
+ "#phy-cells":
+ const: 0
+
+ nvidia,function:
+ description: Function selection for this lane.
+ $ref: /schemas/types.yaml#/definitions/string
+ enum: [ usb3-ss, sata ]
+
+ ports:
+ description: A required child node named "ports" contains a list of
+ subnodes, one for each of the ports exposed by the XUSB pad controller.
+ Each port may need additional resources that can be referenced in its
+ port node.
+
+ The "status" property is used to enable or disable the use of a port.
+ If set to "disabled", the port will not be used on the given board. In
+ order to use the port, this property must be set to "okay".
+ type: object
+ additionalProperties: false
+ properties:
+ usb2-0:
+ type: object
+ additionalProperties: false
+ properties:
+ # no need to further describe this because the connector will
+ # match on gpio-usb-b-connector or usb-b-connector and cause
+ # that binding to be selected for the subnode
+ connector:
+ type: object
+
+ mode:
+ description: A string that determines the mode in which to
+ run the port.
+ $ref: /schemas/types.yaml#/definitions/string
+ enum: [ host, peripheral, otg ]
+
+ nvidia,internal:
+ description: A boolean property whose presence determines
+ that a port is internal. In the absence of this property
+ the port is considered to be external.
+ $ref: /schemas/types.yaml#/definitions/flag
+
+ usb-role-switch:
+ description: |
+ A boolean property whole presence indicates that the port
+ supports OTG or peripheral mode. If present, the port
+ supports switching between USB host and peripheral roles.
+ A connector must be added as a subnode in that case.
+
+ See ../connector/usb-connector.yaml.
+
+ vbus-supply:
+ description: A phandle to the regulator supplying the VBUS
+ voltage.
+
+ dependencies:
+ usb-role-switch: [ connector ]
+
+ usb2-1:
+ type: object
+ additionalProperties: false
+ properties:
+ # no need to further describe this because the connector will
+ # match on gpio-usb-b-connector or usb-b-connector and cause
+ # that binding to be selected for the subnode
+ connector:
+ type: object
+
+ mode:
+ description: A string that determines the mode in which to
+ run the port.
+ $ref: /schemas/types.yaml#/definitions/string
+ enum: [ host, peripheral, otg ]
+
+ nvidia,internal:
+ description: A boolean property whose presence determines
+ that a port is internal. In the absence of this property
+ the port is considered to be external.
+ $ref: /schemas/types.yaml#/definitions/flag
+
+ usb-role-switch:
+ description: |
+ A boolean property whole presence indicates that the port
+ supports OTG or peripheral mode. If present, the port
+ supports switching between USB host and peripheral roles.
+ A connector must be added as a subnode in that case.
+
+ See ../connector/usb-connector.yaml.
+
+ vbus-supply:
+ description: A phandle to the regulator supplying the VBUS
+ voltage.
+
+ dependencies:
+ usb-role-switch: [ connector ]
+
+ usb2-2:
+ type: object
+ additionalProperties: false
+ properties:
+ # no need to further describe this because the connector will
+ # match on gpio-usb-b-connector or usb-b-connector and cause
+ # that binding to be selected for the subnode
+ connector:
+ type: object
+
+ mode:
+ description: A string that determines the mode in which to
+ run the port.
+ $ref: /schemas/types.yaml#/definitions/string
+ enum: [ host, peripheral, otg ]
+
+ nvidia,internal:
+ description: A boolean property whose presence determines
+ that a port is internal. In the absence of this property
+ the port is considered to be external.
+ $ref: /schemas/types.yaml#/definitions/flag
+
+ usb-role-switch:
+ description: |
+ A boolean property whole presence indicates that the port
+ supports OTG or peripheral mode. If present, the port
+ supports switching between USB host and peripheral roles.
+ A connector must be added as a subnode in that case.
+
+ See ../connector/usb-connector.yaml.
+
+ vbus-supply:
+ description: A phandle to the regulator supplying the VBUS
+ voltage.
+
+ dependencies:
+ usb-role-switch: [ connector ]
+
+ usb2-3:
+ type: object
+ additionalProperties: false
+ properties:
+ # no need to further describe this because the connector will
+ # match on gpio-usb-b-connector or usb-b-connector and cause
+ # that binding to be selected for the subnode
+ connector:
+ type: object
+
+ mode:
+ description: A string that determines the mode in which to
+ run the port.
+ $ref: /schemas/types.yaml#/definitions/string
+ enum: [ host, peripheral, otg ]
+
+ nvidia,internal:
+ description: A boolean property whose presence determines
+ that a port is internal. In the absence of this property
+ the port is considered to be external.
+ $ref: /schemas/types.yaml#/definitions/flag
+
+ usb-role-switch:
+ description: |
+ A boolean property whole presence indicates that the port
+ supports OTG or peripheral mode. If present, the port
+ supports switching between USB host and peripheral roles.
+ A connector must be added as a subnode in that case.
+
+ See ../connector/usb-connector.yaml.
+
+ vbus-supply:
+ description: A phandle to the regulator supplying the VBUS
+ voltage.
+
+ dependencies:
+ usb-role-switch: [ connector ]
+
+ hsic-0:
+ type: object
+ additionalProperties: false
+ properties:
+ vbus-supply:
+ description: A phandle to the regulator supplying the VBUS
+ voltage.
+
+ hsic-1:
+ type: object
+ additionalProperties: false
+ properties:
+ vbus-supply:
+ description: A phandle to the regulator supplying the VBUS
+ voltage.
+
+ usb3-0:
+ type: object
+ additionalProperties: false
+ properties:
+ nvidia,internal:
+ description: A boolean property whose presence determines
+ that a port is internal. In the absence of this property
+ the port is considered to be external.
+ $ref: /schemas/types.yaml#/definitions/flag
+
+ nvidia,usb2-companion:
+ description: A single cell that specifies the physical port
+ number to map this super-speed USB port to. The range of
+ valid port numbers varies with the SoC generation.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [ 0, 1, 2, 3 ]
+
+ vbus-supply:
+ description: A phandle to the regulator supplying the VBUS
+ voltage.
+
+ usb3-1:
+ type: object
+ additionalProperties: false
+ properties:
+ nvidia,internal:
+ description: A boolean property whose presence determines
+ that a port is internal. In the absence of this property
+ the port is considered to be external.
+ $ref: /schemas/types.yaml#/definitions/flag
+
+ nvidia,usb2-companion:
+ description: A single cell that specifies the physical port
+ number to map this super-speed USB port to. The range of
+ valid port numbers varies with the SoC generation.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [ 0, 1, 2, 3 ]
+
+ vbus-supply:
+ description: A phandle to the regulator supplying the VBUS
+ voltage.
+
+ usb3-2:
+ type: object
+ additionalProperties: false
+ properties:
+ nvidia,internal:
+ description: A boolean property whose presence determines
+ that a port is internal. In the absence of this property
+ the port is considered to be external.
+ $ref: /schemas/types.yaml#/definitions/flag
+
+ nvidia,usb2-companion:
+ description: A single cell that specifies the physical port
+ number to map this super-speed USB port to. The range of
+ valid port numbers varies with the SoC generation.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [ 0, 1, 2, 3 ]
+
+ vbus-supply:
+ description: A phandle to the regulator supplying the VBUS
+ voltage.
+
+ usb3-3:
+ type: object
+ additionalProperties: false
+ properties:
+ nvidia,internal:
+ description: A boolean property whose presence determines
+ that a port is internal. In the absence of this property
+ the port is considered to be external.
+ $ref: /schemas/types.yaml#/definitions/flag
+
+ nvidia,usb2-companion:
+ description: A single cell that specifies the physical port
+ number to map this super-speed USB port to. The range of
+ valid port numbers varies with the SoC generation.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [ 0, 1, 2, 3 ]
+
+ vbus-supply:
+ description: A phandle to the regulator supplying the VBUS
+ voltage.
+
+additionalProperties: false
+
+required:
+ - avdd-pll-utmip-supply
+ - avdd-pll-uerefe-supply
+ - dvdd-pex-pll-supply
+ - hvdd-pex-pll-e-supply
+
+examples:
+ - |
+ #include <dt-bindings/clock/tegra210-car.h>
+ #include <dt-bindings/gpio/tegra-gpio.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ padctl@7009f000 {
+ compatible = "nvidia,tegra210-xusb-padctl";
+ reg = <0x7009f000 0x1000>;
+ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&tegra_car 142>;
+ reset-names = "padctl";
+
+ avdd-pll-utmip-supply = <&vdd_1v8>;
+ avdd-pll-uerefe-supply = <&vdd_pex_1v05>;
+ dvdd-pex-pll-supply = <&vdd_pex_1v05>;
+ hvdd-pex-pll-e-supply = <&vdd_1v8>;
+
+ pads {
+ usb2 {
+ clocks = <&tegra_car TEGRA210_CLK_USB2_TRK>;
+ clock-names = "trk";
+
+ lanes {
+ usb2-0 {
+ nvidia,function = "xusb";
+ #phy-cells = <0>;
+ };
+
+ usb2-1 {
+ nvidia,function = "xusb";
+ #phy-cells = <0>;
+ };
+
+ usb2-2 {
+ nvidia,function = "xusb";
+ #phy-cells = <0>;
+ };
+
+ usb2-3 {
+ nvidia,function = "xusb";
+ #phy-cells = <0>;
+ };
+ };
+ };
+
+ hsic {
+ clocks = <&tegra_car TEGRA210_CLK_HSIC_TRK>;
+ clock-names = "trk";
+ status = "disabled";
+
+ lanes {
+ hsic-0 {
+ status = "disabled";
+ #phy-cells = <0>;
+ };
+
+ hsic-1 {
+ status = "disabled";
+ #phy-cells = <0>;
+ };
+ };
+ };
+
+ pcie {
+ clocks = <&tegra_car TEGRA210_CLK_PLL_E>;
+ clock-names = "pll";
+ resets = <&tegra_car 205>;
+ reset-names = "phy";
+
+ lanes {
+ pcie-0 {
+ nvidia,function = "pcie-x1";
+ #phy-cells = <0>;
+ };
+
+ pcie-1 {
+ nvidia,function = "pcie-x4";
+ #phy-cells = <0>;
+ };
+
+ pcie-2 {
+ nvidia,function = "pcie-x4";
+ #phy-cells = <0>;
+ };
+
+ pcie-3 {
+ nvidia,function = "pcie-x4";
+ #phy-cells = <0>;
+ };
+
+ pcie-4 {
+ nvidia,function = "pcie-x4";
+ #phy-cells = <0>;
+ };
+
+ pcie-5 {
+ nvidia,function = "usb3-ss";
+ #phy-cells = <0>;
+ };
+
+ pcie-6 {
+ nvidia,function = "usb3-ss";
+ #phy-cells = <0>;
+ };
+ };
+ };
+
+ sata {
+ clocks = <&tegra_car TEGRA210_CLK_PLL_E>;
+ clock-names = "pll";
+ resets = <&tegra_car 204>;
+ reset-names = "phy";
+
+ lanes {
+ sata-0 {
+ nvidia,function = "sata";
+ #phy-cells = <0>;
+ };
+ };
+ };
+ };
+
+ ports {
+ usb2-0 {
+ mode = "peripheral";
+ usb-role-switch;
+
+ connector {
+ compatible = "gpio-usb-b-connector",
+ "usb-b-connector";
+ label = "micro-USB";
+ type = "micro";
+ vbus-gpios = <&gpio TEGRA_GPIO(CC, 4) GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ usb2-1 {
+ vbus-supply = <&vdd_5v0_rtl>;
+ mode = "host";
+ };
+
+ usb2-2 {
+ vbus-supply = <&vdd_usb_vbus>;
+ mode = "host";
+ };
+
+ usb2-3 {
+ mode = "host";
+ };
+
+ hsic-0 {
+ status = "disabled";
+ };
+
+ hsic-1 {
+ status = "disabled";
+ };
+
+ usb3-0 {
+ nvidia,usb2-companion = <1>;
+ };
+
+ usb3-1 {
+ nvidia,usb2-companion = <2>;
+ };
+
+ usb3-2 {
+ status = "disabled";
+ };
+
+ usb3-3 {
+ status = "disabled";
+ };
+ };
+ };