Squashed 'dts/upstream/' content from commit aaba2d45dc2a
git-subtree-dir: dts/upstream
git-subtree-split: aaba2d45dc2a1b3bbb710f2a3808ee1c9f340abe
diff --git a/Bindings/iio/adc/ti,lmp92064.yaml b/Bindings/iio/adc/ti,lmp92064.yaml
new file mode 100644
index 0000000..5fb65bf
--- /dev/null
+++ b/Bindings/iio/adc/ti,lmp92064.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/ti,lmp92064.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments LMP92064 Precision Current and Voltage Sensor.
+
+maintainers:
+ - Leonard Göhrs <l.goehrs@pengutronix.de>
+
+description: |
+ The LMP92064 is a two channel ADC intended for combined voltage and current
+ measurements.
+
+ The device contains two ADCs to allow simultaneous sampling of voltage and
+ current and thus of instantaneous power consumption.
+
+properties:
+ compatible:
+ enum:
+ - ti,lmp92064
+
+ reg:
+ maxItems: 1
+
+ vdd-supply:
+ description: Regulator that provides power to the main part of the chip
+
+ vdig-supply:
+ description: |
+ Regulator that provides power to the digital I/O part of the chip
+
+ shunt-resistor-micro-ohms:
+ description: |
+ Value of the shunt resistor (in µΩ) connected between INCP and INCN,
+ across which current is measured. Used to provide correct scaling of the
+ raw ADC measurement.
+
+ reset-gpios:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - shunt-resistor-micro-ohms
+
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ adc@0 {
+ compatible = "ti,lmp92064";
+ reg = <0>;
+ vdd-supply = <&vdd>;
+ vdig-supply = <&vdd>;
+ spi-max-frequency = <20000000>;
+ shunt-resistor-micro-ohms = <15000>;
+ reset-gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
+ };
+ };
+...