Squashed 'dts/upstream/' content from commit aaba2d45dc2a
git-subtree-dir: dts/upstream
git-subtree-split: aaba2d45dc2a1b3bbb710f2a3808ee1c9f340abe
diff --git a/Bindings/edac/apm-xgene-edac.txt b/Bindings/edac/apm-xgene-edac.txt
new file mode 100644
index 0000000..1006b04
--- /dev/null
+++ b/Bindings/edac/apm-xgene-edac.txt
@@ -0,0 +1,112 @@
+* APM X-Gene SoC EDAC node
+
+EDAC node is defined to describe on-chip error detection and correction.
+The follow error types are supported:
+
+ memory controller - Memory controller
+ PMD (L1/L2) - Processor module unit (PMD) L1/L2 cache
+ L3 - L3 cache controller
+ SoC - SoC IP's such as Ethernet, SATA, and etc
+
+The following section describes the EDAC DT node binding.
+
+Required properties:
+- compatible : Shall be "apm,xgene-edac".
+- regmap-csw : Regmap of the CPU switch fabric (CSW) resource.
+- regmap-mcba : Regmap of the MCB-A (memory bridge) resource.
+- regmap-mcbb : Regmap of the MCB-B (memory bridge) resource.
+- regmap-efuse : Regmap of the PMD efuse resource.
+- regmap-rb : Regmap of the register bus resource. This property
+ is optional only for compatibility. If the RB
+ error conditions are not cleared, it will
+ continuously generate interrupt.
+- reg : First resource shall be the CPU bus (PCP) resource.
+- interrupts : Interrupt-specifier for MCU, PMD, L3, or SoC error
+ IRQ(s).
+
+Required properties for memory controller subnode:
+- compatible : Shall be "apm,xgene-edac-mc".
+- reg : First resource shall be the memory controller unit
+ (MCU) resource.
+- memory-controller : Instance number of the memory controller.
+
+Required properties for PMD subnode:
+- compatible : Shall be "apm,xgene-edac-pmd" or
+ "apm,xgene-edac-pmd-v2".
+- reg : First resource shall be the PMD resource.
+- pmd-controller : Instance number of the PMD controller.
+
+Required properties for L3 subnode:
+- compatible : Shall be "apm,xgene-edac-l3" or
+ "apm,xgene-edac-l3-v2".
+- reg : First resource shall be the L3 EDAC resource.
+
+Required properties for SoC subnode:
+- compatible : Shall be "apm,xgene-edac-soc-v1" for revision 1 or
+ "apm,xgene-edac-l3-soc" for general value reporting
+ only.
+- reg : First resource shall be the SoC EDAC resource.
+
+Example:
+ csw: csw@7e200000 {
+ compatible = "apm,xgene-csw", "syscon";
+ reg = <0x0 0x7e200000 0x0 0x1000>;
+ };
+
+ mcba: mcba@7e700000 {
+ compatible = "apm,xgene-mcb", "syscon";
+ reg = <0x0 0x7e700000 0x0 0x1000>;
+ };
+
+ mcbb: mcbb@7e720000 {
+ compatible = "apm,xgene-mcb", "syscon";
+ reg = <0x0 0x7e720000 0x0 0x1000>;
+ };
+
+ efuse: efuse@1054a000 {
+ compatible = "apm,xgene-efuse", "syscon";
+ reg = <0x0 0x1054a000 0x0 0x20>;
+ };
+
+ rb: rb@7e000000 {
+ compatible = "apm,xgene-rb", "syscon";
+ reg = <0x0 0x7e000000 0x0 0x10>;
+ };
+
+ edac@78800000 {
+ compatible = "apm,xgene-edac";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ regmap-csw = <&csw>;
+ regmap-mcba = <&mcba>;
+ regmap-mcbb = <&mcbb>;
+ regmap-efuse = <&efuse>;
+ regmap-rb = <&rb>;
+ reg = <0x0 0x78800000 0x0 0x100>;
+ interrupts = <0x0 0x20 0x4>,
+ <0x0 0x21 0x4>,
+ <0x0 0x27 0x4>;
+
+ edacmc@7e800000 {
+ compatible = "apm,xgene-edac-mc";
+ reg = <0x0 0x7e800000 0x0 0x1000>;
+ memory-controller = <0>;
+ };
+
+ edacpmd@7c000000 {
+ compatible = "apm,xgene-edac-pmd";
+ reg = <0x0 0x7c000000 0x0 0x200000>;
+ pmd-controller = <0>;
+ };
+
+ edacl3@7e600000 {
+ compatible = "apm,xgene-edac-l3";
+ reg = <0x0 0x7e600000 0x0 0x1000>;
+ };
+
+ edacsoc@7e930000 {
+ compatible = "apm,xgene-edac-soc-v1";
+ reg = <0x0 0x7e930000 0x0 0x1000>;
+ };
+ };