Squashed 'dts/upstream/' content from commit aaba2d45dc2a
git-subtree-dir: dts/upstream
git-subtree-split: aaba2d45dc2a1b3bbb710f2a3808ee1c9f340abe
diff --git a/Bindings/edac/amazon,al-mc-edac.yaml b/Bindings/edac/amazon,al-mc-edac.yaml
new file mode 100644
index 0000000..4cfc3a1
--- /dev/null
+++ b/Bindings/edac/amazon,al-mc-edac.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/edac/amazon,al-mc-edac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amazon's Annapurna Labs Memory Controller EDAC
+
+maintainers:
+ - Talel Shenhar <talel@amazon.com>
+ - Talel Shenhar <talelshenhar@gmail.com>
+
+description: |
+ EDAC node is defined to describe on-chip error detection and correction for
+ Amazon's Annapurna Labs Memory Controller.
+
+properties:
+
+ compatible:
+ const: amazon,al-mc-edac
+
+ reg:
+ maxItems: 1
+
+ "#address-cells":
+ const: 2
+
+ "#size-cells":
+ const: 2
+
+ interrupts:
+ minItems: 1
+ items:
+ - description: uncorrectable error interrupt
+ - description: correctable error interrupt
+
+ interrupt-names:
+ minItems: 1
+ items:
+ - const: ue
+ - const: ce
+
+required:
+ - compatible
+ - reg
+ - "#address-cells"
+ - "#size-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ edac@f0080000 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ compatible = "amazon,al-mc-edac";
+ reg = <0x0 0xf0080000 0x0 0x00010000>;
+ interrupt-parent = <&amazon_al_system_fabric>;
+ interrupt-names = "ue";
+ interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
diff --git a/Bindings/edac/apm-xgene-edac.txt b/Bindings/edac/apm-xgene-edac.txt
new file mode 100644
index 0000000..1006b04
--- /dev/null
+++ b/Bindings/edac/apm-xgene-edac.txt
@@ -0,0 +1,112 @@
+* APM X-Gene SoC EDAC node
+
+EDAC node is defined to describe on-chip error detection and correction.
+The follow error types are supported:
+
+ memory controller - Memory controller
+ PMD (L1/L2) - Processor module unit (PMD) L1/L2 cache
+ L3 - L3 cache controller
+ SoC - SoC IP's such as Ethernet, SATA, and etc
+
+The following section describes the EDAC DT node binding.
+
+Required properties:
+- compatible : Shall be "apm,xgene-edac".
+- regmap-csw : Regmap of the CPU switch fabric (CSW) resource.
+- regmap-mcba : Regmap of the MCB-A (memory bridge) resource.
+- regmap-mcbb : Regmap of the MCB-B (memory bridge) resource.
+- regmap-efuse : Regmap of the PMD efuse resource.
+- regmap-rb : Regmap of the register bus resource. This property
+ is optional only for compatibility. If the RB
+ error conditions are not cleared, it will
+ continuously generate interrupt.
+- reg : First resource shall be the CPU bus (PCP) resource.
+- interrupts : Interrupt-specifier for MCU, PMD, L3, or SoC error
+ IRQ(s).
+
+Required properties for memory controller subnode:
+- compatible : Shall be "apm,xgene-edac-mc".
+- reg : First resource shall be the memory controller unit
+ (MCU) resource.
+- memory-controller : Instance number of the memory controller.
+
+Required properties for PMD subnode:
+- compatible : Shall be "apm,xgene-edac-pmd" or
+ "apm,xgene-edac-pmd-v2".
+- reg : First resource shall be the PMD resource.
+- pmd-controller : Instance number of the PMD controller.
+
+Required properties for L3 subnode:
+- compatible : Shall be "apm,xgene-edac-l3" or
+ "apm,xgene-edac-l3-v2".
+- reg : First resource shall be the L3 EDAC resource.
+
+Required properties for SoC subnode:
+- compatible : Shall be "apm,xgene-edac-soc-v1" for revision 1 or
+ "apm,xgene-edac-l3-soc" for general value reporting
+ only.
+- reg : First resource shall be the SoC EDAC resource.
+
+Example:
+ csw: csw@7e200000 {
+ compatible = "apm,xgene-csw", "syscon";
+ reg = <0x0 0x7e200000 0x0 0x1000>;
+ };
+
+ mcba: mcba@7e700000 {
+ compatible = "apm,xgene-mcb", "syscon";
+ reg = <0x0 0x7e700000 0x0 0x1000>;
+ };
+
+ mcbb: mcbb@7e720000 {
+ compatible = "apm,xgene-mcb", "syscon";
+ reg = <0x0 0x7e720000 0x0 0x1000>;
+ };
+
+ efuse: efuse@1054a000 {
+ compatible = "apm,xgene-efuse", "syscon";
+ reg = <0x0 0x1054a000 0x0 0x20>;
+ };
+
+ rb: rb@7e000000 {
+ compatible = "apm,xgene-rb", "syscon";
+ reg = <0x0 0x7e000000 0x0 0x10>;
+ };
+
+ edac@78800000 {
+ compatible = "apm,xgene-edac";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ regmap-csw = <&csw>;
+ regmap-mcba = <&mcba>;
+ regmap-mcbb = <&mcbb>;
+ regmap-efuse = <&efuse>;
+ regmap-rb = <&rb>;
+ reg = <0x0 0x78800000 0x0 0x100>;
+ interrupts = <0x0 0x20 0x4>,
+ <0x0 0x21 0x4>,
+ <0x0 0x27 0x4>;
+
+ edacmc@7e800000 {
+ compatible = "apm,xgene-edac-mc";
+ reg = <0x0 0x7e800000 0x0 0x1000>;
+ memory-controller = <0>;
+ };
+
+ edacpmd@7c000000 {
+ compatible = "apm,xgene-edac-pmd";
+ reg = <0x0 0x7c000000 0x0 0x200000>;
+ pmd-controller = <0>;
+ };
+
+ edacl3@7e600000 {
+ compatible = "apm,xgene-edac-l3";
+ reg = <0x0 0x7e600000 0x0 0x1000>;
+ };
+
+ edacsoc@7e930000 {
+ compatible = "apm,xgene-edac-soc-v1";
+ reg = <0x0 0x7e930000 0x0 0x1000>;
+ };
+ };
diff --git a/Bindings/edac/aspeed-sdram-edac.txt b/Bindings/edac/aspeed-sdram-edac.txt
new file mode 100644
index 0000000..8ca9e0a
--- /dev/null
+++ b/Bindings/edac/aspeed-sdram-edac.txt
@@ -0,0 +1,28 @@
+Aspeed BMC SoC EDAC node
+
+The Aspeed BMC SoC supports DDR3 and DDR4 memory with and without ECC (error
+correction check).
+
+The memory controller supports SECDED (single bit error correction, double bit
+error detection) and single bit error auto scrubbing by reserving 8 bits for
+every 64 bit word (effectively reducing available memory to 8/9).
+
+Note, the bootloader must configure ECC mode in the memory controller.
+
+
+Required properties:
+- compatible: should be one of
+ - "aspeed,ast2400-sdram-edac"
+ - "aspeed,ast2500-sdram-edac"
+ - "aspeed,ast2600-sdram-edac"
+- reg: sdram controller register set should be <0x1e6e0000 0x174>
+- interrupts: should be AVIC interrupt #0
+
+
+Example:
+
+ edac: sdram@1e6e0000 {
+ compatible = "aspeed,ast2500-sdram-edac";
+ reg = <0x1e6e0000 0x174>;
+ interrupts = <0>;
+ };
diff --git a/Bindings/edac/dmc-520.yaml b/Bindings/edac/dmc-520.yaml
new file mode 100644
index 0000000..84db396
--- /dev/null
+++ b/Bindings/edac/dmc-520.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/edac/dmc-520.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM DMC-520 EDAC
+
+maintainers:
+ - Lei Wang <lewan@microsoft.com>
+
+description: |+
+ DMC-520 node is defined to describe DRAM error detection and correction.
+
+ https://static.docs.arm.com/100000/0200/corelink_dmc520_trm_100000_0200_01_en.pdf
+
+properties:
+ compatible:
+ items:
+ - const: brcm,dmc-520
+ - const: arm,dmc-520
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ minItems: 1
+ maxItems: 10
+
+ interrupt-names:
+ minItems: 1
+ maxItems: 10
+ items:
+ enum:
+ - ram_ecc_errc
+ - ram_ecc_errd
+ - dram_ecc_errc
+ - dram_ecc_errd
+ - failed_access
+ - failed_prog
+ - link_err
+ - temperature_event
+ - arch_fsm
+ - phy_request
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-names
+
+additionalProperties: false
+
+examples:
+ - |
+ dmc0: dmc@200000 {
+ compatible = "brcm,dmc-520", "arm,dmc-520";
+ reg = <0x200000 0x80000>;
+ interrupts = <0x0 0x349 0x4>, <0x0 0x34B 0x4>;
+ interrupt-names = "dram_ecc_errc", "dram_ecc_errd";
+ };
diff --git a/Bindings/edac/socfpga-eccmgr.txt b/Bindings/edac/socfpga-eccmgr.txt
new file mode 100644
index 0000000..8f52206
--- /dev/null
+++ b/Bindings/edac/socfpga-eccmgr.txt
@@ -0,0 +1,383 @@
+Altera SoCFPGA ECC Manager
+This driver uses the EDAC framework to implement the SOCFPGA ECC Manager.
+The ECC Manager counts and corrects single bit errors and counts/handles
+double bit errors which are uncorrectable.
+
+Cyclone5 and Arria5 ECC Manager
+Required Properties:
+- compatible : Should be "altr,socfpga-ecc-manager"
+- #address-cells: must be 1
+- #size-cells: must be 1
+- ranges : standard definition, should translate from local addresses
+
+Subcomponents:
+
+L2 Cache ECC
+Required Properties:
+- compatible : Should be "altr,socfpga-l2-ecc"
+- reg : Address and size for ECC error interrupt clear registers.
+- interrupts : Should be single bit error interrupt, then double bit error
+ interrupt. Note the rising edge type.
+
+On Chip RAM ECC
+Required Properties:
+- compatible : Should be "altr,socfpga-ocram-ecc"
+- reg : Address and size for ECC error interrupt clear registers.
+- iram : phandle to On-Chip RAM definition.
+- interrupts : Should be single bit error interrupt, then double bit error
+ interrupt. Note the rising edge type.
+
+Example:
+
+ eccmgr: eccmgr@ffd08140 {
+ compatible = "altr,socfpga-ecc-manager";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ l2-ecc@ffd08140 {
+ compatible = "altr,socfpga-l2-ecc";
+ reg = <0xffd08140 0x4>;
+ interrupts = <0 36 1>, <0 37 1>;
+ };
+
+ ocram-ecc@ffd08144 {
+ compatible = "altr,socfpga-ocram-ecc";
+ reg = <0xffd08144 0x4>;
+ iram = <&ocram>;
+ interrupts = <0 178 1>, <0 179 1>;
+ };
+ };
+
+Arria10 SoCFPGA ECC Manager
+The Arria10 SoC ECC Manager handles the IRQs for each peripheral
+in a shared register instead of individual IRQs like the Cyclone5
+and Arria5. Therefore the device tree is different as well.
+
+Required Properties:
+- compatible : Should be "altr,socfpga-a10-ecc-manager"
+- altr,sysgr-syscon : phandle to Arria10 System Manager Block
+ containing the ECC manager registers.
+- #address-cells: must be 1
+- #size-cells: must be 1
+- interrupts : Should be single bit error interrupt, then double bit error
+ interrupt.
+- interrupt-controller : boolean indicator that ECC Manager is an interrupt controller
+- #interrupt-cells : must be set to 2.
+- ranges : standard definition, should translate from local addresses
+
+Subcomponents:
+
+L2 Cache ECC
+Required Properties:
+- compatible : Should be "altr,socfpga-a10-l2-ecc"
+- reg : Address and size for ECC error interrupt clear registers.
+- interrupts : Should be single bit error interrupt, then double bit error
+ interrupt, in this order.
+
+On-Chip RAM ECC
+Required Properties:
+- compatible : Should be "altr,socfpga-a10-ocram-ecc"
+- reg : Address and size for ECC block registers.
+- interrupts : Should be single bit error interrupt, then double bit error
+ interrupt, in this order.
+
+Ethernet FIFO ECC
+Required Properties:
+- compatible : Should be "altr,socfpga-eth-mac-ecc"
+- reg : Address and size for ECC block registers.
+- altr,ecc-parent : phandle to parent Ethernet node.
+- interrupts : Should be single bit error interrupt, then double bit error
+ interrupt, in this order.
+
+NAND FIFO ECC
+Required Properties:
+- compatible : Should be "altr,socfpga-nand-ecc"
+- reg : Address and size for ECC block registers.
+- altr,ecc-parent : phandle to parent NAND node.
+- interrupts : Should be single bit error interrupt, then double bit error
+ interrupt, in this order.
+
+DMA FIFO ECC
+Required Properties:
+- compatible : Should be "altr,socfpga-dma-ecc"
+- reg : Address and size for ECC block registers.
+- altr,ecc-parent : phandle to parent DMA node.
+- interrupts : Should be single bit error interrupt, then double bit error
+ interrupt, in this order.
+
+USB FIFO ECC
+Required Properties:
+- compatible : Should be "altr,socfpga-usb-ecc"
+- reg : Address and size for ECC block registers.
+- altr,ecc-parent : phandle to parent USB node.
+- interrupts : Should be single bit error interrupt, then double bit error
+ interrupt, in this order.
+
+QSPI FIFO ECC
+Required Properties:
+- compatible : Should be "altr,socfpga-qspi-ecc"
+- reg : Address and size for ECC block registers.
+- altr,ecc-parent : phandle to parent QSPI node.
+- interrupts : Should be single bit error interrupt, then double bit error
+ interrupt, in this order.
+
+SDMMC FIFO ECC
+Required Properties:
+- compatible : Should be "altr,socfpga-sdmmc-ecc"
+- reg : Address and size for ECC block registers.
+- altr,ecc-parent : phandle to parent SD/MMC node.
+- interrupts : Should be single bit error interrupt, then double bit error
+ interrupt, in this order for port A, and then single bit error interrupt,
+ then double bit error interrupt in this order for port B.
+
+Example:
+
+ eccmgr: eccmgr@ffd06000 {
+ compatible = "altr,socfpga-a10-ecc-manager";
+ altr,sysmgr-syscon = <&sysmgr>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ ranges;
+
+ l2-ecc@ffd06010 {
+ compatible = "altr,socfpga-a10-l2-ecc";
+ reg = <0xffd06010 0x4>;
+ interrupts = <0 IRQ_TYPE_LEVEL_HIGH>,
+ <32 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ ocram-ecc@ff8c3000 {
+ compatible = "altr,socfpga-a10-ocram-ecc";
+ reg = <0xff8c3000 0x90>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH>,
+ <33 IRQ_TYPE_LEVEL_HIGH> ;
+ };
+
+ emac0-rx-ecc@ff8c0800 {
+ compatible = "altr,socfpga-eth-mac-ecc";
+ reg = <0xff8c0800 0x400>;
+ altr,ecc-parent = <&gmac0>;
+ interrupts = <4 IRQ_TYPE_LEVEL_HIGH>,
+ <36 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ emac0-tx-ecc@ff8c0c00 {
+ compatible = "altr,socfpga-eth-mac-ecc";
+ reg = <0xff8c0c00 0x400>;
+ altr,ecc-parent = <&gmac0>;
+ interrupts = <5 IRQ_TYPE_LEVEL_HIGH>,
+ <37 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ nand-buf-ecc@ff8c2000 {
+ compatible = "altr,socfpga-nand-ecc";
+ reg = <0xff8c2000 0x400>;
+ altr,ecc-parent = <&nand>;
+ interrupts = <11 IRQ_TYPE_LEVEL_HIGH>,
+ <43 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ nand-rd-ecc@ff8c2400 {
+ compatible = "altr,socfpga-nand-ecc";
+ reg = <0xff8c2400 0x400>;
+ altr,ecc-parent = <&nand>;
+ interrupts = <13 IRQ_TYPE_LEVEL_HIGH>,
+ <45 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ nand-wr-ecc@ff8c2800 {
+ compatible = "altr,socfpga-nand-ecc";
+ reg = <0xff8c2800 0x400>;
+ altr,ecc-parent = <&nand>;
+ interrupts = <12 IRQ_TYPE_LEVEL_HIGH>,
+ <44 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ dma-ecc@ff8c8000 {
+ compatible = "altr,socfpga-dma-ecc";
+ reg = <0xff8c8000 0x400>;
+ altr,ecc-parent = <&pdma>;
+ interrupts = <10 IRQ_TYPE_LEVEL_HIGH>,
+ <42 IRQ_TYPE_LEVEL_HIGH>;
+
+ usb0-ecc@ff8c8800 {
+ compatible = "altr,socfpga-usb-ecc";
+ reg = <0xff8c8800 0x400>;
+ altr,ecc-parent = <&usb0>;
+ interrupts = <2 IRQ_TYPE_LEVEL_HIGH>,
+ <34 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ qspi-ecc@ff8c8400 {
+ compatible = "altr,socfpga-qspi-ecc";
+ reg = <0xff8c8400 0x400>;
+ altr,ecc-parent = <&qspi>;
+ interrupts = <14 IRQ_TYPE_LEVEL_HIGH>,
+ <46 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ sdmmc-ecc@ff8c2c00 {
+ compatible = "altr,socfpga-sdmmc-ecc";
+ reg = <0xff8c2c00 0x400>;
+ altr,ecc-parent = <&mmc>;
+ interrupts = <15 IRQ_TYPE_LEVEL_HIGH>,
+ <47 IRQ_TYPE_LEVEL_HIGH>,
+ <16 IRQ_TYPE_LEVEL_HIGH>,
+ <48 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+Stratix10 SoCFPGA ECC Manager (ARM64)
+The Stratix10 SoC ECC Manager handles the IRQs for each peripheral
+in a shared register similar to the Arria10. However, Stratix10 ECC
+requires access to registers that can only be read from Secure Monitor
+with SMC calls. Therefore the device tree is slightly different. Note
+that only 1 interrupt is sent in Stratix10 because the double bit errors
+are treated as SErrors in ARM64 instead of IRQs in ARM32.
+
+Required Properties:
+- compatible : Should be "altr,socfpga-s10-ecc-manager"
+- altr,sysgr-syscon : phandle to Stratix10 System Manager Block
+ containing the ECC manager registers.
+- interrupts : Should be single bit error interrupt.
+- interrupt-controller : boolean indicator that ECC Manager is an interrupt controller
+- #interrupt-cells : must be set to 2.
+- #address-cells: must be 1
+- #size-cells: must be 1
+- ranges : standard definition, should translate from local addresses
+
+Subcomponents:
+
+SDRAM ECC
+Required Properties:
+- compatible : Should be "altr,sdram-edac-s10"
+- interrupts : Should be single bit error interrupt.
+
+On-Chip RAM ECC
+Required Properties:
+- compatible : Should be "altr,socfpga-s10-ocram-ecc"
+- reg : Address and size for ECC block registers.
+- altr,ecc-parent : phandle to parent OCRAM node.
+- interrupts : Should be single bit error interrupt.
+
+Ethernet FIFO ECC
+Required Properties:
+- compatible : Should be "altr,socfpga-s10-eth-mac-ecc"
+- reg : Address and size for ECC block registers.
+- altr,ecc-parent : phandle to parent Ethernet node.
+- interrupts : Should be single bit error interrupt.
+
+NAND FIFO ECC
+Required Properties:
+- compatible : Should be "altr,socfpga-s10-nand-ecc"
+- reg : Address and size for ECC block registers.
+- altr,ecc-parent : phandle to parent NAND node.
+- interrupts : Should be single bit error interrupt.
+
+DMA FIFO ECC
+Required Properties:
+- compatible : Should be "altr,socfpga-s10-dma-ecc"
+- reg : Address and size for ECC block registers.
+- altr,ecc-parent : phandle to parent DMA node.
+- interrupts : Should be single bit error interrupt.
+
+USB FIFO ECC
+Required Properties:
+- compatible : Should be "altr,socfpga-s10-usb-ecc"
+- reg : Address and size for ECC block registers.
+- altr,ecc-parent : phandle to parent USB node.
+- interrupts : Should be single bit error interrupt.
+
+SDMMC FIFO ECC
+Required Properties:
+- compatible : Should be "altr,socfpga-s10-sdmmc-ecc"
+- reg : Address and size for ECC block registers.
+- altr,ecc-parent : phandle to parent SD/MMC node.
+- interrupts : Should be single bit error interrupt for port A
+ and then single bit error interrupt for port B.
+
+Example:
+
+ eccmgr {
+ compatible = "altr,socfpga-s10-ecc-manager";
+ altr,sysmgr-syscon = <&sysmgr>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupts = <0 15 4>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ ranges;
+
+ sdramedac {
+ compatible = "altr,sdram-edac-s10";
+ interrupts = <16 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ ocram-ecc@ff8cc000 {
+ compatible = "altr,socfpga-s10-ocram-ecc";
+ reg = <ff8cc000 0x100>;
+ altr,ecc-parent = <&ocram>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ emac0-rx-ecc@ff8c0000 {
+ compatible = "altr,socfpga-s10-eth-mac-ecc";
+ reg = <0xff8c0000 0x100>;
+ altr,ecc-parent = <&gmac0>;
+ interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ emac0-tx-ecc@ff8c0400 {
+ compatible = "altr,socfpga-s10-eth-mac-ecc";
+ reg = <0xff8c0400 0x100>;
+ altr,ecc-parent = <&gmac0>;
+ interrupts = <5 IRQ_TYPE_LEVEL_HIGH>'
+ };
+
+ nand-buf-ecc@ff8c8000 {
+ compatible = "altr,socfpga-s10-nand-ecc";
+ reg = <0xff8c8000 0x100>;
+ altr,ecc-parent = <&nand>;
+ interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ nand-rd-ecc@ff8c8400 {
+ compatible = "altr,socfpga-s10-nand-ecc";
+ reg = <0xff8c8400 0x100>;
+ altr,ecc-parent = <&nand>;
+ interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ nand-wr-ecc@ff8c8800 {
+ compatible = "altr,socfpga-s10-nand-ecc";
+ reg = <0xff8c8800 0x100>;
+ altr,ecc-parent = <&nand>;
+ interrupts = <12 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ dma-ecc@ff8c9000 {
+ compatible = "altr,socfpga-s10-dma-ecc";
+ reg = <0xff8c9000 0x100>;
+ altr,ecc-parent = <&pdma>;
+ interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
+
+ usb0-ecc@ff8c4000 {
+ compatible = "altr,socfpga-s10-usb-ecc";
+ reg = <0xff8c4000 0x100>;
+ altr,ecc-parent = <&usb0>;
+ interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ sdmmc-ecc@ff8c8c00 {
+ compatible = "altr,socfpga-s10-sdmmc-ecc";
+ reg = <0xff8c8c00 0x100>;
+ altr,ecc-parent = <&mmc>;
+ interrupts = <14 IRQ_TYPE_LEVEL_HIGH>,
+ <15 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };