Squashed 'dts/upstream/' content from commit aaba2d45dc2a
git-subtree-dir: dts/upstream
git-subtree-split: aaba2d45dc2a1b3bbb710f2a3808ee1c9f340abe
diff --git a/Bindings/dma/snps,dma-spear1340.yaml b/Bindings/dma/snps,dma-spear1340.yaml
new file mode 100644
index 0000000..5da8291
--- /dev/null
+++ b/Bindings/dma/snps,dma-spear1340.yaml
@@ -0,0 +1,185 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/snps,dma-spear1340.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys Designware DMA Controller
+
+maintainers:
+ - Viresh Kumar <vireshk@kernel.org>
+ - Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+
+allOf:
+ - $ref: dma-controller.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - const: snps,dma-spear1340
+ - items:
+ - enum:
+ - renesas,r9a06g032-dma
+ - const: renesas,rzn1-dma
+
+
+ "#dma-cells":
+ minimum: 3
+ maximum: 4
+ description: |
+ First cell is a phandle pointing to the DMA controller. Second one is
+ the DMA request line number. Third cell is the memory master identifier
+ for transfers on dynamically allocated channel. Fourth cell is the
+ peripheral master identifier for transfers on an allocated channel. Fifth
+ cell is an optional mask of the DMA channels permitted to be allocated
+ for the corresponding client device.
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ description: AHB interface reference clock.
+ const: hclk
+
+ dma-channels:
+ description: |
+ Number of DMA channels supported by the controller. In case if
+ not specified the driver will try to auto-detect this and
+ the rest of the optional parameters.
+ minimum: 1
+ maximum: 8
+
+ dma-requests:
+ minimum: 1
+ maximum: 16
+
+ dma-masters:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Number of DMA masters supported by the controller. In case if
+ not specified the driver will try to auto-detect this and
+ the rest of the optional parameters.
+ minimum: 1
+ maximum: 4
+
+ chan_allocation_order:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ DMA channels allocation order specifier. Zero means ascending order
+ (first free allocated), while one - descending (last free allocated).
+ default: 0
+ enum: [0, 1]
+
+ chan_priority:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ DMA channels priority order. Zero means ascending channels priority
+ so the very first channel has the highest priority. While 1 means
+ descending priority (the last channel has the highest priority).
+ default: 0
+ enum: [0, 1]
+
+ block_size:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Maximum block size supported by the DMA controller.
+ enum: [3, 7, 15, 31, 63, 127, 255, 511, 1023, 2047, 4095]
+
+ data-width:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ description: Data bus width per each DMA master in bytes.
+ items:
+ maxItems: 4
+ items:
+ enum: [4, 8, 16, 32]
+
+ data_width:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ deprecated: true
+ description: |
+ Data bus width per each DMA master in (2^n * 8) bits. This property is
+ deprecated. It' usage is discouraged in favor of data-width one. Moreover
+ the property incorrectly permits to define data-bus width of 8 and 16
+ bits, which is impossible in accordance with DW DMAC IP-core data book.
+ items:
+ maxItems: 4
+ items:
+ enum:
+ - 0 # 8 bits
+ - 1 # 16 bits
+ - 2 # 32 bits
+ - 3 # 64 bits
+ - 4 # 128 bits
+ - 5 # 256 bits
+ default: 0
+
+ multi-block:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ description: |
+ LLP-based multi-block transfer supported by hardware per
+ each DMA channel.
+ items:
+ maxItems: 8
+ items:
+ enum: [0, 1]
+ default: 1
+
+ snps,max-burst-len:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ description: |
+ Maximum length of the burst transactions supported by the controller.
+ This property defines the upper limit of the run-time burst setting
+ (CTLx.SRC_MSIZE/CTLx.DST_MSIZE fields) so the allowed burst length
+ will be from 1 to max-burst-len words. It's an array property with one
+ cell per channel in the units determined by the value set in the
+ CTLx.SRC_TR_WIDTH/CTLx.DST_TR_WIDTH fields (data width).
+ items:
+ maxItems: 8
+ items:
+ enum: [4, 8, 16, 32, 64, 128, 256]
+ default: 256
+
+ snps,dma-protection-control:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Bits one-to-one passed to the AHB HPROT[3:1] bus. Each bit setting
+ indicates the following features: bit 0 - privileged mode,
+ bit 1 - DMA is bufferable, bit 2 - DMA is cacheable.
+ default: 0
+ minimum: 0
+ maximum: 7
+
+unevaluatedProperties: false
+
+required:
+ - compatible
+ - "#dma-cells"
+ - reg
+ - interrupts
+
+examples:
+ - |
+ dma-controller@fc000000 {
+ compatible = "snps,dma-spear1340";
+ reg = <0xfc000000 0x1000>;
+ interrupt-parent = <&vic1>;
+ interrupts = <12>;
+
+ dma-channels = <8>;
+ dma-requests = <16>;
+ dma-masters = <4>;
+ #dma-cells = <3>;
+
+ chan_allocation_order = <1>;
+ chan_priority = <1>;
+ block_size = <0xfff>;
+ data-width = <8 8>;
+ multi-block = <0 0 0 0 0 0 0 0>;
+ snps,max-burst-len = <16 16 4 4 4 4 4 4>;
+ };
+...