diff --git a/Bindings/dma/snps,dma-spear1340.yaml b/Bindings/dma/snps,dma-spear1340.yaml
new file mode 100644
index 0000000..5da8291
--- /dev/null
+++ b/Bindings/dma/snps,dma-spear1340.yaml
@@ -0,0 +1,185 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/snps,dma-spear1340.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys Designware DMA Controller
+
+maintainers:
+  - Viresh Kumar <vireshk@kernel.org>
+  - Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+
+allOf:
+  - $ref: dma-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: snps,dma-spear1340
+      - items:
+          - enum:
+              - renesas,r9a06g032-dma
+          - const: renesas,rzn1-dma
+
+
+  "#dma-cells":
+    minimum: 3
+    maximum: 4
+    description: |
+      First cell is a phandle pointing to the DMA controller. Second one is
+      the DMA request line number. Third cell is the memory master identifier
+      for transfers on dynamically allocated channel. Fourth cell is the
+      peripheral master identifier for transfers on an allocated channel. Fifth
+      cell is an optional mask of the DMA channels permitted to be allocated
+      for the corresponding client device.
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    description: AHB interface reference clock.
+    const: hclk
+
+  dma-channels:
+    description: |
+      Number of DMA channels supported by the controller. In case if
+      not specified the driver will try to auto-detect this and
+      the rest of the optional parameters.
+    minimum: 1
+    maximum: 8
+
+  dma-requests:
+    minimum: 1
+    maximum: 16
+
+  dma-masters:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Number of DMA masters supported by the controller. In case if
+      not specified the driver will try to auto-detect this and
+      the rest of the optional parameters.
+    minimum: 1
+    maximum: 4
+
+  chan_allocation_order:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      DMA channels allocation order specifier. Zero means ascending order
+      (first free allocated), while one - descending (last free allocated).
+    default: 0
+    enum: [0, 1]
+
+  chan_priority:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      DMA channels priority order. Zero means ascending channels priority
+      so the very first channel has the highest priority. While 1 means
+      descending priority (the last channel has the highest priority).
+    default: 0
+    enum: [0, 1]
+
+  block_size:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Maximum block size supported by the DMA controller.
+    enum: [3, 7, 15, 31, 63, 127, 255, 511, 1023, 2047, 4095]
+
+  data-width:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: Data bus width per each DMA master in bytes.
+    items:
+      maxItems: 4
+      items:
+        enum: [4, 8, 16, 32]
+
+  data_width:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    deprecated: true
+    description: |
+      Data bus width per each DMA master in (2^n * 8) bits. This property is
+      deprecated. It' usage is discouraged in favor of data-width one. Moreover
+      the property incorrectly permits to define data-bus width of 8 and 16
+      bits, which is impossible in accordance with DW DMAC IP-core data book.
+    items:
+      maxItems: 4
+      items:
+        enum:
+          - 0 # 8 bits
+          - 1 # 16 bits
+          - 2 # 32 bits
+          - 3 # 64 bits
+          - 4 # 128 bits
+          - 5 # 256 bits
+        default: 0
+
+  multi-block:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: |
+      LLP-based multi-block transfer supported by hardware per
+      each DMA channel.
+    items:
+      maxItems: 8
+      items:
+        enum: [0, 1]
+        default: 1
+
+  snps,max-burst-len:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: |
+      Maximum length of the burst transactions supported by the controller.
+      This property defines the upper limit of the run-time burst setting
+      (CTLx.SRC_MSIZE/CTLx.DST_MSIZE fields) so the allowed burst length
+      will be from 1 to max-burst-len words. It's an array property with one
+      cell per channel in the units determined by the value set in the
+      CTLx.SRC_TR_WIDTH/CTLx.DST_TR_WIDTH fields (data width).
+    items:
+      maxItems: 8
+      items:
+        enum: [4, 8, 16, 32, 64, 128, 256]
+        default: 256
+
+  snps,dma-protection-control:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Bits one-to-one passed to the AHB HPROT[3:1] bus. Each bit setting
+      indicates the following features: bit 0 - privileged mode,
+      bit 1 - DMA is bufferable, bit 2 - DMA is cacheable.
+    default: 0
+    minimum: 0
+    maximum: 7
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - "#dma-cells"
+  - reg
+  - interrupts
+
+examples:
+  - |
+    dma-controller@fc000000 {
+      compatible = "snps,dma-spear1340";
+      reg = <0xfc000000 0x1000>;
+      interrupt-parent = <&vic1>;
+      interrupts = <12>;
+
+      dma-channels = <8>;
+      dma-requests = <16>;
+      dma-masters = <4>;
+      #dma-cells = <3>;
+
+      chan_allocation_order = <1>;
+      chan_priority = <1>;
+      block_size = <0xfff>;
+      data-width = <8 8>;
+      multi-block = <0 0 0 0 0 0 0 0>;
+      snps,max-burst-len = <16 16 4 4 4 4 4 4>;
+    };
+...